diff options
| -rw-r--r-- | .cvsignore | 24 | ||||
| -rw-r--r-- | Doxyfile.in | 567 | ||||
| -rw-r--r-- | Makefile.am | 8 | ||||
| -rw-r--r-- | configure.in | 2 |
4 files changed, 588 insertions, 13 deletions
diff --git a/.cvsignore b/.cvsignore index fdad5b0de..55e4109c6 100644 --- a/.cvsignore +++ b/.cvsignore @@ -1,16 +1,10 @@ .deps .depend .depend-done +.libs +Doxyfile Makefile Makefile.in -.libs -rpm -rpm2cpio -rpmconvert -rpmrc -macros -find-requires -find-provides config.h config.h.in config.guess @@ -19,10 +13,18 @@ config.log config.status config.sub configure +doxygen +find-requires +find-provides +lib-rpmrc libtool -stamp-h -stamp-h.in ltconfig ltmain.sh +macros +rpm +rpm2cpio +rpmconvert +rpmrc +stamp-h +stamp-h.in *.tar.gz -lib-rpmrc diff --git a/Doxyfile.in b/Doxyfile.in new file mode 100644 index 000000000..8fb9cb295 --- /dev/null +++ b/Doxyfile.in @@ -0,0 +1,567 @@ +# Doxyfile 1.0.0 + +# This file describes the settings to be used by doxygen for a project +# +# All text after a hash (#) is considered a comment and will be ignored +# The format is: +# TAG = value [value, ...] +# Values that contain spaces should be placed between quotes (" ") + +#--------------------------------------------------------------------------- +# General configuration options +#--------------------------------------------------------------------------- + +# The PROJECT_NAME tag is a single word (or a sequence of word surrounded +# by quotes) that should identify the project. + +PROJECT_NAME = @PACKAGE@ + +# The PROJECT_NUMBER tag can be used to enter a project or revision number. +# This could be handy for archiving the generated documentation or +# if some version control system is used. + +PROJECT_NUMBER = @VERSION@ + +# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) +# base path where the generated documentation will be put. +# If a relative path is entered, it will be relative to the location +# where doxygen was started. If left blank the current directory will be used. + +OUTPUT_DIRECTORY = doxygen + +# The OUTPUT_LANGUAGE tag is used to specify the language in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all constant output in the proper language. +# The default language is English, other supported languages are: +# Dutch, French, Italian, Czech, Swedish, German and Japanese + +OUTPUT_LANGUAGE = English + +# The QUIET tag can be used to turn on/off the messages that are generated +# by doxygen. Possible values are YES and NO. If left blank NO is used. + +QUIET = NO + +# The WARNINGS tag can be used to turn on/off the warning messages that are +# generated by doxygen. Possible values are YES and NO. If left blank +# NO is used. + +WARNINGS = YES + +# The DISABLE_INDEX tag can be used to turn on/off the condensed index at +# top of each HTML page. The value NO (the default) enables the index and +# the value YES disables it. + +DISABLE_INDEX = NO + +# If the EXTRACT_ALL tag is set to YES all classes and functions will be +# included in the documentation, even if no documentation was available. + +EXTRACT_ALL = YES + +# If the EXTRACT_PRIVATE tag is set to YES all private members of a class +# will be included in the documentation. + +EXTRACT_PRIVATE = NO + +# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all +# undocumented members inside documented classes or files. + +HIDE_UNDOC_MEMBERS = NO + +# If the HIDE_UNDOC_CLASSESS tag is set to YES, Doxygen will hide all +# undocumented classes. + +HIDE_UNDOC_CLASSES = NO + +# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will +# include brief member descriptions after the members that are listed in +# the file and class documentation (similar to JavaDoc). +# Set to NO to disable this. + +BRIEF_MEMBER_DESC = YES + +# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend +# the brief description of a member or function before the detailed description. +# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the +# brief descriptions will be completely suppressed. + +REPEAT_BRIEF = YES + +# If the ALWAYS_DETAILS_SEC and REPEAT_BRIEF tags are both set to YES then +# Doxygen will generate a detailed section even if there is only a brief +# description. + +ALWAYS_DETAILED_SEC = NO + +# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full +# path before files name in the file list and in the header files. If set +# to NO the shortest path that makes the file name unique will be used. + +FULL_PATH_NAMES = NO + +# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag +# can be used to strip a user defined part of the path. Stripping is +# only done if one of the specified strings matches the left-hand part of +# the path. + +STRIP_FROM_PATH = + +# The INTERNAL_DOCS tag determines if documentation +# that is typed after a \internal command is included. If the tag is set +# to NO (the default) then the documentation will be excluded. +# Set it to YES to include the internal documentation. + +INTERNAL_DOCS = NO + +# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will +# generate a class diagram (in Html and LaTeX) for classes with base or +# super classes. Setting the tag to NO turns the diagrams off. + +CLASS_DIAGRAMS = YES + +# If the SOURCE_BROWSER tag is set to YES then a list of source files will +# be generated. Documented entities will be cross-referenced with these sources. + +SOURCE_BROWSER = YES + +# Setting the INLINE_SOURCES tag to YES will include the body +# of functions and classes directly in the documentation. + +INLINE_SOURCES = NO + +# If the CASE_SENSE_NAMES tag is set to NO (the default) then Doxygen +# will only generate file names in lower case letters. If set to +# YES upper case letters are also allowed. This is useful if you have +# classes or files whose names only differ in case and if your file system +# supports case sensitive file names. + +CASE_SENSE_NAMES = NO + +# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen +# will generate a verbatim copy of the header file for each class for +# which an include is specified. Set to NO to disable this. + +VERBATIM_HEADERS = YES + +# If the JAVADOC_AUTOBRIEF tag is set to YES (the default) then Doxygen +# will interpret the first line (until the first dot) of a JavaDoc-style +# comment as the brief description. If set to NO, the Javadoc-style will +# behave just like the Qt-style comments. + +JAVADOC_AUTOBRIEF = YES + +# if the INHERIT_DOCS tag is set to YES (the default) then an undocumented +# member inherits the documentation from any documented member that it +# reimplements. + +INHERIT_DOCS = YES + +# if the INLINE_INFO tag is set to YES (the default) then a tag [inline] +# is inserted in the documentation for inline members. + +INLINE_INFO = YES + +# the TAB_SIZE tag can be used to set the number of spaces in a tab. +# Doxygen uses this value to replace tabs by spaces in code fragments. + +TAB_SIZE = 8 + +#--------------------------------------------------------------------------- +# configuration options related to the input files +#--------------------------------------------------------------------------- + +# The INPUT tag can be used to specify the files and/or directories that contain +# documented source files. You may enter file names like "myfile.cpp" or +# directories like "/usr/src/myproject". Separate the files or directories +# with spaces. + +INPUT = \ + ./build.c \ + ./build.h \ + ./config.h \ + ./build.c \ + ./convertdb.c \ + ./oldrpmdb.c \ + ./rpm.c \ + ./rpm2cpio.c \ + ./build/build.c \ + ./build/expression.c \ + ./build/files.c \ + ./build/misc.c \ + ./build/myftw.c \ + ./build/myftw.h \ + ./build/names.c \ + ./build/pack.c \ + ./build/parseBuildInstallClean.c \ + ./build/parseChangelog.c \ + ./build/parseDescription.c \ + ./build/parseFiles.c \ + ./build/parsePreamble.c \ + ./build/parsePrep.c \ + ./build/parseReqs.c \ + ./build/parseScript.c \ + ./build/parseSpec.c \ + ./build/reqprov.c \ + ./build/rpmbuild.h \ + ./build/spec.c \ + ./lib/cpio.c \ + ./lib/dbindex.c \ + ./lib/depends.c \ + ./lib/falloc.c \ + ./lib/formats.c \ + ./lib/fprint.c \ + ./lib/fs.c \ + ./lib/hash.c \ + ./lib/header.c \ + ./lib/install.c \ + ./lib/lookup.c \ + ./lib/macro.c \ + ./lib/misc.h \ + ./lib/md5.c \ + ./lib/md5sum.c \ + ./lib/messages.c \ + ./lib/misc.c \ + ./lib/oldheader.c \ + ./lib/package.c \ + ./lib/problems.c \ + ./lib/query.c \ + ./lib/rebuilddb.c \ + ./lib/rpmchecksig.c \ + ./lib/rpmdb.c \ + ./lib/rpmerr.c \ + ./lib/rpminstall.c \ + ./lib/rpmio.c \ + ./lib/rpmio.h \ + ./lib/rpmlead.c \ + ./lib/rpmlib.h \ + ./lib/rpmmalloc.c \ + ./lib/rpmrc.c \ + ./lib/signature.c \ + ./lib/stringbuf.c \ + ./lib/stringbuf.h \ + ./lib/stubs.c \ + ./lib/tagName.c \ + ./lib/tagtable.c \ + ./lib/test.c \ + ./lib/transaction.c \ + ./lib/tufdio.c \ + ./lib/uninstall.c \ + ./lib/url.c \ + ./lib/verify.c \ + ./popt/findme.c \ + ./popt/popt.c \ + ./popt/poptconfig.c \ + ./popt/popthelp.c \ + ./popt/poptparse.c \ + ./tools/dump.c \ + ./tools/dumpdb.c \ + ./tools/fstrcmp.c \ + ./tools/javadeps.c \ + ./tools/message.c \ + ./tools/rpmarchive.c \ + ./tools/rpmchecksig.c \ + ./tools/rpmgettext.c \ + ./tools/rpmheader.c \ + ./tools/rpminject.c \ + ./tools/rpmlead.c \ + ./tools/rpmsignature.c \ + ./tools/str-list.c + +# ./system.h \ +# ./build/buildio.h \ +# ./build/rpmspec.h \ +# ./lib/dbindex.h \ +# ./lib/header.h \ +# ./lib/rpmmacro.h \ +# ./lib/rpmurl.h \ +# ./popt/findme.h \ +# ./popt/poptint.h \ +# ./popt/popt.h \ + +# If the value of the INPUT tag contains directories, you can use the +# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp +# and *.h) to filter out the source-files in the directories. If left +# blank all files are included. + +FILE_PATTERNS = *.c *.h + +# The RECURSIVE tag can be used to turn specify whether or not subdirectories +# should be searched for input files as well. Possible values are YES and NO. +# If left blank NO is used. + +RECURSIVE = NO + +# The EXCLUDE tag can be used to specify files and/or directories that should +# excluded from the INPUT source files. This way you can easily exclude a +# subdirectory from a directory tree whose root is specified with the INPUT tag. + +EXCLUDE = + +# If the value of the INPUT tag contains directories, you can use the +# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude +# certain files from those directories. + +EXCLUDE_PATTERNS = + +# The EXAMPLE_PATH tag can be used to specify one or more files or +# directories that contain example code fragments that are included (see +# the \include command). + +EXAMPLE_PATH = + +# If the value of the EXAMPLE_PATH tag contains directories, you can use the +# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp +# and *.h) to filter out the source-files in the directories. If left +# blank all files are included. + +EXAMPLE_PATTERNS = + +# The IMAGE_PATH tag can be used to specify one or more files or +# directories that contain image that are included in the documentation (see +# the \image command). + +IMAGE_PATH = + +# The INPUT_FILTER tag can be used to specify a program that doxygen should +# invoke to filter for each input file. Doxygen will invoke the filter program +# by executing (via popen()) the command <filter> <input-file>, where <filter> +# is the value of the INPUT_FILTER tag, and <input-file> is the name of an +# input file. Doxygen will then use the output that the filter program writes +# to standard output. + +INPUT_FILTER = + +#--------------------------------------------------------------------------- +# configuration options related to the HTML output +#--------------------------------------------------------------------------- + +# If the GENERATE_HTML tag is set to YES (the default) Doxygen will +# generate HTML output + +GENERATE_HTML = YES + +# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `html' will be used as the default path. + +HTML_OUTPUT = + +# The HTML_HEADER tag can be used to specify a personal HTML header for +# each generated HTML page. If it is left blank doxygen will generate a +# standard header. + +HTML_HEADER = + +# The HTML_FOOTER tag can be used to specify a personal HTML footer for +# each generated HTML page. If it is left blank doxygen will generate a +# standard footer. + +HTML_FOOTER = + +# The HTML_STYLESHEET tag can be used to specify a user defined cascading +# style sheet that is used by each HTML page. It can be used to +# fine-tune the look of the HTML output. If the tag is left blank doxygen +# will generate a default style sheet + +HTML_STYLESHEET = + +# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, +# files or namespaces will be aligned in HTML using tables. If set to +# NO a bullet list will be used. + +HTML_ALIGN_MEMBERS = YES + +# If the GENERATE_HTMLHELP tag is set to YES, additional index files +# will be generated that can be used as input for tools like the +# Microsoft HTML help workshop to generate a compressed HTML help file (.chm) +# of the generated HTML documentation. + +GENERATE_HTMLHELP = NO + +# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index +# of all compounds will be generated. Enable this if the project +# contains a lot of classes, structs, unions or interfaces. + +ALPHABETICAL_INDEX = NO + +# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then +# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns +# in which this list will be split (can be a number in the range [1..20]) + +COLS_IN_ALPHA_INDEX = 5 + +#--------------------------------------------------------------------------- +# configuration options related to the LaTeX output +#--------------------------------------------------------------------------- + +# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will +# generate Latex output. + +GENERATE_LATEX = NO + +# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `latex' will be used as the default path. + +LATEX_OUTPUT = + +# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact +# LaTeX documents. This may be useful for small projects and may help to +# save some trees in general. + +COMPACT_LATEX = NO + +# The PAPER_TYPE tag can be used to set the paper type that is used +# by the printer. Possible values are: a4, a4wide, letter, legal and +# executive. If left blank a4wide will be used. + +PAPER_TYPE = a4wide + +# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX +# packages that should be included in the LaTeX output. + +EXTRA_PACKAGES = + +# The LATEX_HEADER tag can be used to specify a personal LaTeX header for +# the generated latex document. The header should contain everything until +# the first chapter. If it is left blank doxygen will generate a +# standard header. Notice: only use this tag if you know what you are doing! + +LATEX_HEADER = + +# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated +# is prepared for conversion to pdf (using ps2pdf). The pdf file will +# contain links (just like the HTML output) instead of page references +# This makes the output suitable for online browsing using a pdf viewer. + +PDF_HYPERLINKS = NO + +#--------------------------------------------------------------------------- +# configuration options related to the man page output +#--------------------------------------------------------------------------- + +# If the GENERATE_MAN tag is set to YES (the default) Doxygen will +# generate man pages + +GENERATE_MAN = YES + +# The MAN_OUTPUT tag is used to specify where the man pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `man' will be used as the default path. + +MAN_OUTPUT = + +# The MAN_EXTENSION tag determines the extension that is added to +# the generated man pages (default is the subroutine's section .3) + +MAN_EXTENSION = .3 + +#--------------------------------------------------------------------------- +# Configuration options related to the preprocessor +#--------------------------------------------------------------------------- + +# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will +# evaluate all C-preprocessor directives found in the sources and include +# files. + +ENABLE_PREPROCESSING = YES + +# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro +# names in the source code. If set to NO (the default) only conditional +# compilation will be performed. + +MACRO_EXPANSION = NO + +# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files +# in the INCLUDE_PATH (see below) will be search if a #include is found. + +SEARCH_INCLUDES = YES + +# The INCLUDE_PATH tag can be used to specify one or more directories that +# contain include files that are not input files but should be processed by +# the preprocessor. + +INCLUDE_PATH = + +# The PREDEFINED tag can be used to specify one or more macro names that +# are defined before the preprocessor is started (similar to the -D option of +# gcc). The argument of the tag is a list of macros of the form: name +# or name=definition (no spaces). If the definition and the = are +# omitted =1 is assumed. + +PREDEFINED = + +# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES +# then the macro expansion is limited to the macros specified with the +# PREDEFINED tag. + +EXPAND_ONLY_PREDEF = NO + +#--------------------------------------------------------------------------- +# Configuration options related to external references +#--------------------------------------------------------------------------- + +# The TAGFILES tag can be used to specify one or more tagfiles. + +TAGFILES = + +# When a file name is specified after GENERATE_TAGFILE, doxygen will create +# a tag file that is based on the input files it reads. + +GENERATE_TAGFILE = + +# If the ALLEXTERNALS tag is set to YES all external classes will be listed +# in the class index. If set to NO only the inherited external classes +# will be listed. + +ALLEXTERNALS = NO + +# The PERL_PATH should be the absolute path and name of the perl script +# interpreter (i.e. the result of `which perl'). + +PERL_PATH = /usr/bin/perl + +#--------------------------------------------------------------------------- +# Configuration options related to the search engine +#--------------------------------------------------------------------------- + +# The SEARCHENGINE tag specifies whether or not a search engine should be +# used. If set to NO the values of all tags below this one will be ignored. + +SEARCHENGINE = NO + +# The CGI_NAME tag should be the name of the CGI script that +# starts the search engine (doxysearch) with the correct parameters. +# A script with this name will be generated by doxygen. + +CGI_NAME = search.cgi + +# The CGI_URL tag should be the absolute URL to the directory where the +# cgi binaries are located. See the documentation of your http daemon for +# details. + +CGI_URL = + +# The DOC_URL tag should be the absolute URL to the directory where the +# documentation is located. If left blank the absolute path to the +# documentation, with file:// prepended to it, will be used. + +DOC_URL = + +# The DOC_ABSPATH tag should be the absolute path to the directory where the +# documentation is located. If left blank the directory on the local machine +# will be used. + +DOC_ABSPATH = + +# The BIN_ABSPATH tag must point to the directory where the doxysearch binary +# is installed. + +BIN_ABSPATH = /usr/local/bin/ + +# The EXT_DOC_PATHS tag can be used to specify one or more paths to +# documentation generated for other projects. This allows doxysearch to search +# the documentation for these projects as well. + +EXT_DOC_PATHS = diff --git a/Makefile.am b/Makefile.am index 2256ed5c9..f3b9cd3ee 100644 --- a/Makefile.am +++ b/Makefile.am @@ -86,7 +86,7 @@ install-data-local: @$(mkinstalldirs) $(DESTDIR)/$(prefix)/src/redhat/SRPMS @$(mkinstalldirs) $(DESTDIR)/var/tmp -.PHONY: tar +.PHONY: tar tar: rm -rf /tmp/rpm-$(VERSION) $(MAKE) DESTDIR=/tmp/rpm-$(VERSION) install @@ -116,3 +116,9 @@ archive: .PHONY: nextsrpm nextsrpm: all archive @sudo ./rpm -ta rpm-$(VERSION).tar.gz + +.PHONY: doxygen +doxygen: Doxyfile + rm -rf doxygen + mkdir -p doxygen + doxygen diff --git a/configure.in b/configure.in index 9aba0de56..245349170 100644 --- a/configure.in +++ b/configure.in @@ -897,7 +897,7 @@ dnl # XXX Propagate -lucb to popt ... dnl export LIBS INCPATH CONFIG_SITE AC_CONFIG_SUBDIRS(popt) -AC_OUTPUT([Makefile rpmrc macros lib/Makefile +AC_OUTPUT([Doxyfile Makefile rpmrc macros lib/Makefile build/Makefile tools/Makefile scripts/Makefile tests/Makefile tests/rpmrc tests/macros tests/hello-test/Makefile misc/Makefile po/Makefile.in intl/Makefile |