Preliminary support for doxygen generated API doco.

CVS patchset: 3525
CVS date: 2000/01/19 19:20:56

4 files changed, 588 insertions, 13 deletions

diff --git a/.cvsignore b/.cvsignore
index fdad5b0de..55e4109c6 100644
--- a/.cvsignore
+++ b/.cvsignore
@@ -1,16 +1,10 @@
 .deps
 .depend
 .depend-done
+.libs
+Doxyfile
 Makefile
 Makefile.in
-.libs
-rpm
-rpm2cpio
-rpmconvert
-rpmrc
-macros
-find-requires
-find-provides
 config.h
 config.h.in
 config.guess
@@ -19,10 +13,18 @@ config.log
 config.status
 config.sub
 configure
+doxygen
+find-requires
+find-provides
+lib-rpmrc
 libtool
-stamp-h
-stamp-h.in
 ltconfig
 ltmain.sh
+macros
+rpm
+rpm2cpio
+rpmconvert
+rpmrc
+stamp-h
+stamp-h.in
 *.tar.gz
-lib-rpmrc
diff --git a/Doxyfile.in b/Doxyfile.in
new file mode 100644
index 000000000..8fb9cb295
--- /dev/null
+++ b/Doxyfile.in
@@ -0,0 +1,567 @@
+# Doxyfile 1.0.0
+
+# This file describes the settings to be used by doxygen for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# General configuration options
+#---------------------------------------------------------------------------
+
+# The PROJECT_NAME tag is a single word (or a sequence of word surrounded
+# by quotes) that should identify the project. 
+
+PROJECT_NAME         = @PACKAGE@
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or 
+# if some version control system is used.
+
+PROJECT_NUMBER       = @VERSION@
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) 
+# base path where the generated documentation will be put. 
+# If a relative path is entered, it will be relative to the location 
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY     = doxygen
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are: 
+# Dutch, French, Italian, Czech, Swedish, German and Japanese
+
+OUTPUT_LANGUAGE      = English
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                = NO
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS             = YES
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX        = NO
+
+# If the EXTRACT_ALL tag is set to YES all classes and functions will be
+# included in the documentation, even if no documentation was available.
+
+EXTRACT_ALL          = YES
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE      = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members inside documented classes or files.
+
+HIDE_UNDOC_MEMBERS   = NO
+
+# If the HIDE_UNDOC_CLASSESS tag is set to YES, Doxygen will hide all
+# undocumented classes.
+
+HIDE_UNDOC_CLASSES   = NO
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in 
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC    = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the 
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF         = YES
+
+# If the ALWAYS_DETAILS_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES      = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path.
+
+STRIP_FROM_PATH      =
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set 
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS        = NO
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a class diagram (in Html and LaTeX) for classes with base or
+# super classes. Setting the tag to NO turns the diagrams off.
+
+CLASS_DIAGRAMS       = YES
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+
+SOURCE_BROWSER       = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES       = NO
+
+# If the CASE_SENSE_NAMES tag is set to NO (the default) then Doxygen
+# will only generate file names in lower case letters. If set to
+# YES upper case letters are also allowed. This is useful if you have
+# classes or files whose names only differ in case and if your file system
+# supports case sensitive file names.
+
+CASE_SENSE_NAMES     = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS     = YES
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES (the default) then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the Javadoc-style will
+# behave just like the Qt-style comments.
+
+JAVADOC_AUTOBRIEF    = YES
+
+# if the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# reimplements.
+
+INHERIT_DOCS         = YES
+
+# if the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO          = YES
+
+# the TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE             = 8
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain 
+# documented source files. You may enter file names like "myfile.cpp" or 
+# directories like "/usr/src/myproject". Separate the files or directories 
+# with spaces.
+
+INPUT                = \
+	./build.c \
+	./build.h \
+	./config.h \
+	./build.c \
+	./convertdb.c \
+	./oldrpmdb.c \
+	./rpm.c \
+	./rpm2cpio.c \
+	./build/build.c \
+	./build/expression.c \
+	./build/files.c \
+	./build/misc.c \
+	./build/myftw.c \
+	./build/myftw.h \
+	./build/names.c \
+	./build/pack.c \
+	./build/parseBuildInstallClean.c \
+	./build/parseChangelog.c \
+	./build/parseDescription.c \
+	./build/parseFiles.c \
+	./build/parsePreamble.c \
+	./build/parsePrep.c \
+	./build/parseReqs.c \
+	./build/parseScript.c \
+	./build/parseSpec.c \
+	./build/reqprov.c \
+	./build/rpmbuild.h \
+	./build/spec.c \
+	./lib/cpio.c \
+	./lib/dbindex.c \
+	./lib/depends.c \
+	./lib/falloc.c \
+	./lib/formats.c \
+	./lib/fprint.c \
+	./lib/fs.c \
+	./lib/hash.c \
+	./lib/header.c \
+	./lib/install.c \
+	./lib/lookup.c \
+	./lib/macro.c \
+	./lib/misc.h \
+	./lib/md5.c \
+	./lib/md5sum.c \
+	./lib/messages.c \
+	./lib/misc.c \
+	./lib/oldheader.c \
+	./lib/package.c \
+	./lib/problems.c \
+	./lib/query.c \
+	./lib/rebuilddb.c \
+	./lib/rpmchecksig.c \
+	./lib/rpmdb.c \
+	./lib/rpmerr.c \
+	./lib/rpminstall.c \
+	./lib/rpmio.c \
+	./lib/rpmio.h \
+	./lib/rpmlead.c \
+	./lib/rpmlib.h \
+	./lib/rpmmalloc.c \
+	./lib/rpmrc.c \
+	./lib/signature.c \
+	./lib/stringbuf.c \
+	./lib/stringbuf.h \
+	./lib/stubs.c \
+	./lib/tagName.c \
+	./lib/tagtable.c \
+	./lib/test.c \
+	./lib/transaction.c \
+	./lib/tufdio.c \
+	./lib/uninstall.c \
+	./lib/url.c \
+	./lib/verify.c \
+	./popt/findme.c \
+	./popt/popt.c \
+	./popt/poptconfig.c \
+	./popt/popthelp.c \
+	./popt/poptparse.c \
+	./tools/dump.c \
+	./tools/dumpdb.c \
+	./tools/fstrcmp.c \
+	./tools/javadeps.c \
+	./tools/message.c \
+	./tools/rpmarchive.c \
+	./tools/rpmchecksig.c \
+	./tools/rpmgettext.c \
+	./tools/rpmheader.c \
+	./tools/rpminject.c \
+	./tools/rpmlead.c \
+	./tools/rpmsignature.c \
+	./tools/str-list.c
+
+#	./system.h \
+#	./build/buildio.h \
+#	./build/rpmspec.h \
+#	./lib/dbindex.h \
+#	./lib/header.h \
+#	./lib/rpmmacro.h \
+#	./lib/rpmurl.h \
+#	./popt/findme.h \
+#	./popt/poptint.h \
+#	./popt/popt.h \
+
+# If the value of the INPUT tag contains directories, you can use the 
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp 
+# and *.h) to filter out the source-files in the directories. If left 
+# blank all files are included.
+
+FILE_PATTERNS        = *.c *.h
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE            = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a 
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE              =
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories.
+
+EXCLUDE_PATTERNS     =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or 
+# directories that contain example code fragments that are included (see 
+# the \include command).
+
+EXAMPLE_PATH         =
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp 
+# and *.h) to filter out the source-files in the directories. If left 
+# blank all files are included.
+
+EXAMPLE_PATTERNS     =
+
+# The IMAGE_PATH tag can be used to specify one or more files or 
+# directories that contain image that are included in the documentation (see 
+# the \image command).
+
+IMAGE_PATH           =
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program 
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+
+INPUT_FILTER         =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output
+
+GENERATE_HTML        = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT          =
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for 
+# each generated HTML page. If it is left blank doxygen will generate a 
+# standard header.
+
+HTML_HEADER          =
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for 
+# each generated HTML page. If it is left blank doxygen will generate a 
+# standard footer.
+
+HTML_FOOTER          =
+
+# The HTML_STYLESHEET tag can be used to specify a user defined cascading
+# style sheet that is used by each HTML page. It can be used to 
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet
+
+HTML_STYLESHEET      =
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS   = YES
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compressed HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP    = NO
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX   = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX  = 5
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX       = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT         =
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX        = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and 
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE           = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES       =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for 
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a 
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER         =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS       = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN         = YES
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT           =
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION        = .3
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor 
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional 
+# compilation will be performed.
+
+MACRO_EXPANSION      = NO
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES      = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH         =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are 
+# omitted =1 is assumed.
+
+PREDEFINED           =
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED tag.
+
+EXPAND_ONLY_PREDEF   = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to external references 
+#---------------------------------------------------------------------------
+
+# The TAGFILES tag can be used to specify one or more tagfiles. 
+
+TAGFILES             =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE     =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS         = NO
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH            = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the search engine 
+#---------------------------------------------------------------------------
+
+# The SEARCHENGINE tag specifies whether or not a search engine should be 
+# used. If set to NO the values of all tags below this one will be ignored.
+
+SEARCHENGINE         = NO
+
+# The CGI_NAME tag should be the name of the CGI script that
+# starts the search engine (doxysearch) with the correct parameters.
+# A script with this name will be generated by doxygen.
+
+CGI_NAME             = search.cgi
+
+# The CGI_URL tag should be the absolute URL to the directory where the
+# cgi binaries are located. See the documentation of your http daemon for 
+# details.
+
+CGI_URL              =
+
+# The DOC_URL tag should be the absolute URL to the directory where the
+# documentation is located. If left blank the absolute path to the 
+# documentation, with file:// prepended to it, will be used.
+
+DOC_URL              =
+
+# The DOC_ABSPATH tag should be the absolute path to the directory where the
+# documentation is located. If left blank the directory on the local machine
+# will be used.
+
+DOC_ABSPATH          =
+
+# The BIN_ABSPATH tag must point to the directory where the doxysearch binary
+# is installed.
+
+BIN_ABSPATH          = /usr/local/bin/
+
+# The EXT_DOC_PATHS tag can be used to specify one or more paths to 
+# documentation generated for other projects. This allows doxysearch to search
+# the documentation for these projects as well.
+
+EXT_DOC_PATHS        =
diff --git a/Makefile.am b/Makefile.am
index 2256ed5c9..f3b9cd3ee 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -86,7 +86,7 @@ install-data-local:
 	@$(mkinstalldirs) $(DESTDIR)/$(prefix)/src/redhat/SRPMS
 	@$(mkinstalldirs) $(DESTDIR)/var/tmp
 
-.PHONY:                tar
+.PHONY: tar
 tar:
 	rm -rf /tmp/rpm-$(VERSION)
 	$(MAKE) DESTDIR=/tmp/rpm-$(VERSION) install
@@ -116,3 +116,9 @@ archive:
 .PHONY:	nextsrpm
 nextsrpm: all archive
 	@sudo ./rpm -ta rpm-$(VERSION).tar.gz
+
+.PHONY: doxygen
+doxygen: Doxyfile
+	rm -rf doxygen
+	mkdir -p doxygen
+	doxygen
diff --git a/configure.in b/configure.in
index 9aba0de56..245349170 100644
--- a/configure.in
+++ b/configure.in
@@ -897,7 +897,7 @@ dnl # XXX Propagate -lucb to popt ...
 dnl export LIBS INCPATH CONFIG_SITE
 
 AC_CONFIG_SUBDIRS(popt)
-AC_OUTPUT([Makefile rpmrc macros lib/Makefile
+AC_OUTPUT([Doxyfile Makefile rpmrc macros lib/Makefile
 	build/Makefile tools/Makefile scripts/Makefile
 	tests/Makefile tests/rpmrc tests/macros tests/hello-test/Makefile
 	misc/Makefile po/Makefile.in intl/Makefile