diff options
Diffstat (limited to 'packaging')
| -rw-r--r-- | packaging/baselibs.conf | 21 | ||||
| -rwxr-xr-x | packaging/binaries_to_prepare | 1 | ||||
| -rwxr-xr-x | packaging/sed-x86.spec | 323 | ||||
| -rw-r--r-- | packaging/sqlite-x86.spec | 97 |
4 files changed, 65 insertions, 377 deletions
diff --git a/packaging/baselibs.conf b/packaging/baselibs.conf index 3c0fc80..a3e67d6 100644 --- a/packaging/baselibs.conf +++ b/packaging/baselibs.conf @@ -1,22 +1 @@ arch i586 targets armv5tel:arm armv6l:arm armv7l:arm armv7hl:arm armv7nhl:arm -sed-x86 - targettype x86 block! - targettype 32bit block! - targettype arm autoreqprov off - targettype arm requires "eglibc-x86-arm" - targettype arm requires "sed" - targettype arm prefix /emul/ia32-linux - targettype arm extension -arm - targettype arm +/ - targettype arm -//usr/share/man - targettype arm -//usr/share/doc - targettype arm requires "tizen-accelerator" - targettype arm post " if test -e /bin/sed.orig-arm -a -h /bin/sed; then " - targettype arm post " echo "/bin/sed.orig-arm already present - skipping." " - targettype arm post " else " - targettype arm post " mv /bin/sed /bin/sed.orig-arm ; ln -s <prefix>/bin/sed /bin/sed " - targettype arm post " fi " - - targettype arm preun " if test -e /bin/sed.orig-arm ; then " - targettype arm preun " rm -f /bin/sed ; mv /bin/sed.orig-arm /bin/sed" - targettype arm preun " fi " diff --git a/packaging/binaries_to_prepare b/packaging/binaries_to_prepare deleted file mode 100755 index 16f91f8..0000000 --- a/packaging/binaries_to_prepare +++ /dev/null @@ -1 +0,0 @@ -/bin/sed
\ No newline at end of file diff --git a/packaging/sed-x86.spec b/packaging/sed-x86.spec deleted file mode 100755 index 80ab7fc..0000000 --- a/packaging/sed-x86.spec +++ /dev/null @@ -1,323 +0,0 @@ -%define __strip /bin/true -%define _build_name_fmt %%{ARCH}/%%{NAME}-%%{VERSION}-%%{RELEASE}.%%{ARCH}.vanish.rpm -# meta spec file for cross-chroot setup -# -# Copyright (c) 2009-2011 Martin Mohring (martin.mohring@opensuse.org) -# Copyright (c) 2011 5eEcoSystems (info@5eecosystems.com) -# -# All modifications and additions to the file contributed by third parties -# remain the property of the copyright owners, unless otherwise agreed -# upon. The cross build accelerators as is, and modifications -# and additions to the it, are licensed under the GPLv2. -# In addition, the cross build accelerators are licensed together with -# a package where they will be contained in -# under the license of the prestine package (unless the -# license for the pristine package is not an Open Source License, in which -# case the license is the MIT License). An "Open Source License" is a -# license that conforms to the Open Source Definition (Version 1.9) -# published by the Open Source Initiative. - -#\/\/\/\/\/\/\/\/\/\/ -### only changes here - -# -# The original package name -%define oldname sed - -# -# The architectures this meta package is built on -%define myexclusive i586 - -# -# The required package for building this package -# This can be distribution dependent. Good start is: -# e.g. rpm grep tar sed patchelf -# -BuildRequires: rpm grep tar sed patchelf - -# -# Additional required packages needed in addition to those of original package -# e.g. (usually empty) for an accelerator to be 100% compatible -# -#Requires: <usuallyemptlylist> - -# For a real accelerator, also the old packge is required for compatibility -# pls change this only if you know what you do -Requires: %oldname - -# -# Release under which to put the accelerator -# e.g. 1 or higher -# -Release: 8.3 - -### no changes needed below this line -# ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - -### no changes needed -# -# The new package name - convention is %oldname-x86 -%define newname %{oldname}-x86 -# -# The version of the original package is read from its rpm db info -%{expand:%%define newversion %(rpm -q --qf '[%{version}]' %oldname)} -# -# The license of the original package is read from its rpm db info -%{expand:%%define newlicense %(rpm -q --qf '[%{license}]' %oldname)} -# -# The group information of the original package -%{expand:%%define newgroup %(rpm -q --qf '[%{group}]' %oldname)} -# -# The summary of the original package -%{expand:%%define newsummary %(rpm -q --qf '[%{summary} - special version ]' %oldname)} -# -# New rpath to add to files on request -%define newrpath "/emul/ia32-linux/lib:/emul/ia32-linux/usr/lib" -%define newinterpreter /emul/ia32-linux/lib/ld-linux.so.2 -# -# Some automatic checks for availability -# binaries_to_prepare -%define binaries_to_prepare %{expand:%(test -e %{_sourcedir}/binaries_to_prepare && echo 1 || echo 0)} -%define libraries_to_prepare %{expand:%(test -e %{_sourcedir}/libraries_to_prepare && echo 1 || echo 0)} -%define special_script %{expand:%(test -e %{_sourcedir}/special_script && echo 1 || echo 0)} -%define files_to_ignore %{expand:%(test -e %{_sourcedir}/files_to_ignore && echo 1 || echo 0)} -# -### no changes needed below this line -%define nodebug 1 - - -Name: %newname -Version: %newversion -AutoReqProv: 0 -Provides: %newname -BuildRequires: %oldname -# no auto requirements - they're generated -License: %newlicense -Group: %newgroup -ExclusiveArch: %myexclusive -Summary: Dont use %newsummary ! -BuildRoot: %{_tmppath}/%{name}-%{version}-build -%if %binaries_to_prepare -Source10: binaries_to_prepare -%endif -%if %libraries_to_prepare -Source20: libraries_to_prepare -%endif -%if %special_script -Source30: special_script -%endif -%if %files_to_ignore -Source40: files_to_ignore -%endif -Source100: baselibs.conf - -%description -This is a meta-package providing %name. -It is not intended to be used on a normal system/device! -Original description: -%{expand:%(rpm -q --qf '[%{description}]' %oldname)} - - - -%prep - -%build - -%install -%if %nodebug -set +x -%endif -mkdir -p %buildroot -rpm -ql %oldname > filestoinclude1 - -# ignore files - construct sed script -sedtmp="sedtmp.$$" -echo "s#^%{_docdir}.*##" >> $sedtmp -echo "s#^%{_mandir}.*##" >> $sedtmp -echo "s#^%{_infodir}.*##" >> $sedtmp - -# evaluate files_to_ignore -%if %files_to_ignore -for i in `cat %{_sourcedir}/files_to_ignore`; do - echo "Ignoring file: $i" - echo "s#^${i}.*##" >> $sedtmp -done -%endif - -# ignore default filesystem files -for i in `rpm -ql filesystem`; do - echo "s#^${i}\$##" >> $sedtmp -done - -#finish up -echo "/^\$/d" >> $sedtmp - -#execute -sed -f $sedtmp -i filestoinclude1 - -# tar copy to buildroot -tar -T filestoinclude1 -cpf - | ( cd %buildroot && tar -xpf - ) -rm filestoinclude1 - -# Todo: refractor -# no directories, in filelist -find %buildroot > filestoinclude2 -cat filestoinclude2 | sed -e "s#%{buildroot}##g" | uniq | sort > filestoinclude1 -for i in `cat filestoinclude1`; do -# no directories - if ! test -d %buildroot/$i ; then - # - echo "$i" >> filestoinclude - fi -done -rm filestoinclude1 -rm filestoinclude2 - -# patchelf the binaries -%if %binaries_to_prepare -echo "" -echo "[ .oO Preparing binaries Oo. ]" -echo "" -mkdir -p %buildroot/%{_prefix}/share/applybinary/ -for binary in `cat %{_sourcedir}/binaries_to_prepare` ; do - echo "Processing binary: $binary" - tmp="tmp.$$" -%if %nodebug - debug= -%else - debug="--debug" -%endif - if file $binary | grep -q dynamic; then - ldd $binary | grep -v "ld-linux" | grep -v "linux-gate" | sed -e "s#=.*##g" -e "s#^\t*##g" > $tmp - deps=$(for i in `cat $tmp` ; do rpm -q --whatprovides "$i" | grep -v "no package"; done) - cleandeps=$(echo "$cleandeps" "$deps" | sort | uniq | sed -e "s/-[0-9].*//g") - patchelf $debug --set-rpath %newrpath %buildroot/$binary - patchelf $debug --set-interpreter %newinterpreter %buildroot/$binary - patchelf $debug --set-rpath %newrpath %buildroot/$binary - patchelf $debug --set-interpreter %newinterpreter %buildroot/$binary - if test -n "$debug"; then - patchelf --print-rpath %buildroot/$binary - patchelf --print-interpreter %buildroot/$binary - fi - fi - echo "$binary" >> %buildroot/%{_prefix}/share/applybinary/%name - echo "" -done -%endif - -# stub -%if %libraries_to_prepare -echo "" -echo "[ .oO Preparing libraries Oo. ]" -echo "" -%endif - -# stub -%if %special_script -echo "" -echo "[ .oO Executing special script Oo. ]" -echo "" -%endif - -# lets start the shellquote nightmare ;) -shellquote() -{ - for arg; do - arg=${arg//\\/\\\\} -# arg=${arg//\$/\$} # already needs quoting ;( -# arg=${arg/\"/\\\"} # dito -# arg=${arg//\`/\`} # dito - arg=${arg//\\|/\|} - arg=${arg//\\|/|} - echo "$arg" - done -} - - -echo "Creating baselibs_new.conf" -echo "" -rm -rRf /tmp/baselibs_new.conf || true - -shellquote "%{name}" >> /tmp/baselibs_new.conf -shellquote " targettype x86 block!" >> /tmp/baselibs_new.conf -shellquote " targettype 32bit block!" >> /tmp/baselibs_new.conf -shellquote " targettype arm autoreqprov off" >> /tmp/baselibs_new.conf - -# automagically fill in basic requirements -for i in $cleandeps ; do - shellquote " targettype arm requires \"${i}-x86-arm\"" >> /tmp/baselibs_new.conf -done - -# we require the native version -shellquote " targettype arm requires \"%{oldname}\" " >> /tmp/baselibs_new.conf -shellquote " targettype arm prefix /emul/ia32-linux" >> /tmp/baselibs_new.conf -shellquote " targettype arm extension -arm" >> /tmp/baselibs_new.conf -shellquote " targettype arm +/" >> /tmp/baselibs_new.conf - -# safe space and download time -shellquote " targettype arm -/%{_mandir}" >> /tmp/baselibs_new.conf -shellquote " targettype arm -/%{_docdir}" >> /tmp/baselibs_new.conf -shellquote " targettype arm requires \"tizen-accelerator\"" >> /tmp/baselibs_new.conf - -# replace native with x86 binaries as defined in file -%if %binaries_to_prepare -# Todo: error handling if .orig-arm is present -for binary in `cat %{_sourcedir}/binaries_to_prepare` ; do - shellquote " targettype arm post \" if test -e ${binary}.orig-arm -a -h ${binary}; then \" " >> /tmp/baselibs_new.conf - shellquote " targettype arm post \" echo \"${binary}.orig-arm already present - skipping.\" \" " >> /tmp/baselibs_new.conf - shellquote " targettype arm post \" else \" " >> /tmp/baselibs_new.conf - shellquote " targettype arm post \" mv ${binary} ${binary}.orig-arm ; ln -s <prefix>${binary} ${binary} \"" >> /tmp/baselibs_new.conf - shellquote " targettype arm post \" fi \" " >> /tmp/baselibs_new.conf -done - -# shellquote " targettype arm post \"# XXX this is klunky and ugly, rpm itself should handle this\" " >> /tmp/baselibs_new.conf -# shellquote " targettype arm post \"dbstat=/usr/lib/rpm/rpmdb_stat\" " >> /tmp/baselibs_new.conf -# shellquote " targettype arm post \"if [ -x "\$dbstat" ]; then\" " >> /tmp/baselibs_new.conf -# shellquote " targettype arm post \" if "\$dbstat" -e -h /var/lib/rpm 2>&1 \| grep -q \"t match environment version\"; then\" " >> /tmp/baselibs_new.conf -# shellquote " targettype arm post \" file /bin/rpm ; rm -f /var/lib/rpm/__db.* && rpm --rebuilddb \" " >> /tmp/baselibs_new.conf -# shellquote " targettype arm post \" fi\" " >> /tmp/baselibs_new.conf -# shellquote " targettype arm post \"fi\" " >> /tmp/baselibs_new.conf - - -shellquote " " >> /tmp/baselibs_new.conf -for binary in `cat %{_sourcedir}/binaries_to_prepare` ; do - - shellquote " targettype arm preun \" if test -e ${binary}.orig-arm ; then \"" >> /tmp/baselibs_new.conf - shellquote " targettype arm preun \" rm -f ${binary} ; mv ${binary}.orig-arm ${binary}\"" >> /tmp/baselibs_new.conf - shellquote " targettype arm preun \" fi \"" >> /tmp/baselibs_new.conf - -done -%endif - -cat /tmp/baselibs_new.conf >> %{_sourcedir}/baselibs.conf - -echo "################################################################################" -echo "" -echo "" -echo "REQUIREMENTS:" -grep "requires" %{_sourcedir}/baselibs.conf | sort | uniq | sed -e "s# targettype.*requires ##g" | while read k ; do - echo "CBinstall: $k" -done -echo "Runscripts: %{newname}-arm" -echo "" -echo "" -echo "################################################################################" -set -x - -%clean -rm -rf $RPM_BUILD_ROOT - -%files -f filestoinclude -%defattr(-,root,root) -%if %binaries_to_prepare -/%{_prefix}/share/applybinary/%name -%endif -%changelog -* Fri Jul 6 2012 UkJung Kim <ujkim@samsung.com> - 1.0 -- Added and updated OBS-Accelerator-0.1.tar.bz2 -* Sun Apr 24 2011 Jan-Simon Möller <jsmoeller@linuxfoundation.org> - 1.0 -- Add baselibs.conf to src.rpm -* Tue Jan 4 2011 Carsten Munk <carsten@maemo.org> - 1.0 -- Part of BMC#12113 (speedrpm implementation) -- Add armv7hl and armv7nhl support -- Initial version on meego.com (based off Jan-Simon Moller's other -x86 packages) diff --git a/packaging/sqlite-x86.spec b/packaging/sqlite-x86.spec index e131e72..7b2faf5 100644 --- a/packaging/sqlite-x86.spec +++ b/packaging/sqlite-x86.spec @@ -1,33 +1,58 @@ %define __strip /bin/true -%define _build_name_fmt %%{ARCH}/%%{NAME}-%%{VERSION}-%%{RELEASE}.%%{ARCH}.dontuse.rpm -# meta spec file for cross-chroot setup +%define _build_name_fmt %%{ARCH}/%%{NAME}-%%{VERSION}-%%{RELEASE}.%%{ARCH}.vanish.rpm +# meta spec file for cross-chroot setup # -# Copyright (c) 2010 Jan-Simon Möller (jsmoeller@linuxfoundation.org) -# License: GPLv2 - -## README -## -## In this file: -## 1) define name of original package (see oldname) -## -## File binaries_to_prepare: -## 2) fill in the binaries which need to be available to the foreign chroot -## e.g. /bin/bash - this will make a i586 bash available -## +# Copyright (c) 2009-2011 Martin Mohring (martin.mohring@opensuse.org) +# Copyright (c) 2011 5eEcoSystems (info@5eecosystems.com) +# +# All modifications and additions to the file contributed by third parties +# remain the property of the copyright owners, unless otherwise agreed +# upon. The cross build accelerators as is, and modifications +# and additions to the it, are licensed under the GPLv2. +# In addition, the cross build accelerators are licensed together with +# a package where they will be contained in +# under the license of the prestine package (unless the +# license for the pristine package is not an Open Source License, in which +# case the license is the MIT License). An "Open Source License" is a +# license that conforms to the Open Source Definition (Version 1.9) +# published by the Open Source Initiative. #\/\/\/\/\/\/\/\/\/\/ ### only changes here + # # The original package name %define oldname sqlite + # # The architectures this meta package is built on %define myexclusive i586 + # -### no changes needed below this line -# ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +# The required package for building this package +# This can be distribution dependent. Good start is: +# e.g. rpm grep tar sed patchelf +# +BuildRequires: rpm grep tar sed patchelf +# +# Additional required packages needed in addition to those of original package +# e.g. (usually empty) for an accelerator to be 100% compatible +# +#Requires: <usuallyemptlylist> +# For a real accelerator, also the old packge is required for compatibility +# pls change this only if you know what you do +Requires: %oldname + +# +# Release under which to put the accelerator +# e.g. 1 or higher +# +Release: 8.3 + +### no changes needed below this line +# ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ### no changes needed # @@ -63,17 +88,14 @@ Name: %newname Version: %newversion -Release: 7 AutoReqProv: 0 Provides: %newname -BuildRequires: rpm grep tar patchelf sed -rpmlint-Moblin -rpmlint-mini -post-build-checks BuildRequires: %oldname -Requires: %oldname # no auto requirements - they're generated License: %newlicense Group: %newgroup ExclusiveArch: %myexclusive -Summary: Don't use! %newsummary +Summary: Dont use %newsummary ! BuildRoot: %{_tmppath}/%{name}-%{version}-build %if %binaries_to_prepare Source10: binaries_to_prepare @@ -156,7 +178,7 @@ rm filestoinclude2 echo "" echo "[ .oO Preparing binaries Oo. ]" echo "" -mkdir %buildroot/%{_prefix}/share/applybinary/ +mkdir -p %buildroot/%{_prefix}/share/applybinary/ for binary in `cat %{_sourcedir}/binaries_to_prepare` ; do echo "Processing binary: $binary" tmp="tmp.$$" @@ -165,16 +187,18 @@ for binary in `cat %{_sourcedir}/binaries_to_prepare` ; do %else debug="--debug" %endif - ldd $binary | grep -v "ld-linux" | grep -v "linux-gate" | sed -e "s#=.*##g" -e "s#^\t*##g" > $tmp - deps=$(for i in `cat $tmp` ; do rpm -q --whatprovides "$i" | grep -v "no package"; done) - cleandeps=$(echo "$cleandeps" "$deps" | sort | uniq | sed -e "s/-[0-9].*//g") - patchelf $debug --set-rpath %newrpath %buildroot/$binary - patchelf $debug --set-interpreter %newinterpreter %buildroot/$binary - patchelf $debug --set-rpath %newrpath %buildroot/$binary - patchelf $debug --set-interpreter %newinterpreter %buildroot/$binary - if test -n "$debug"; then - patchelf --print-rpath %buildroot/$binary - patchelf --print-interpreter %buildroot/$binary + if file $binary | grep -q dynamic; then + ldd $binary | grep -v "ld-linux" | grep -v "linux-gate" | sed -e "s#=.*##g" -e "s#^\t*##g" > $tmp + deps=$(for i in `cat $tmp` ; do rpm -q --whatprovides "$i" | grep -v "no package"; done) + cleandeps=$(echo "$cleandeps" "$deps" | sort | uniq | sed -e "s/-[0-9].*//g") + patchelf $debug --set-rpath %newrpath %buildroot/$binary + patchelf $debug --set-interpreter %newinterpreter %buildroot/$binary + patchelf $debug --set-rpath %newrpath %buildroot/$binary + patchelf $debug --set-interpreter %newinterpreter %buildroot/$binary + if test -n "$debug"; then + patchelf --print-rpath %buildroot/$binary + patchelf --print-interpreter %buildroot/$binary + fi fi echo "$binary" >> %buildroot/%{_prefix}/share/applybinary/%name echo "" @@ -239,7 +263,7 @@ shellquote " targettype arm requires \"tizen-accelerator\"" >> /tmp/baselibs_ne %if %binaries_to_prepare # Todo: error handling if .orig-arm is present for binary in `cat %{_sourcedir}/binaries_to_prepare` ; do - shellquote " targettype arm post \" if test -e ${binary}.orig-arm; then \" " >> /tmp/baselibs_new.conf + shellquote " targettype arm post \" if test -e ${binary}.orig-arm -a -h ${binary}; then \" " >> /tmp/baselibs_new.conf shellquote " targettype arm post \" echo \"${binary}.orig-arm already present - skipping.\" \" " >> /tmp/baselibs_new.conf shellquote " targettype arm post \" else \" " >> /tmp/baselibs_new.conf shellquote " targettype arm post \" mv ${binary} ${binary}.orig-arm ; ln -s <prefix>${binary} ${binary} \"" >> /tmp/baselibs_new.conf @@ -279,3 +303,12 @@ rm -rf $RPM_BUILD_ROOT %if %binaries_to_prepare /%{_prefix}/share/applybinary/%name %endif +%changelog +* Fri Jul 6 2012 UkJung Kim <ujkim@samsung.com> - 1.0 +- Added and updated OBS-Accelerator-0.1.tar.bz2 +* Sun Apr 24 2011 Jan-Simon Möller <jsmoeller@linuxfoundation.org> - 1.0 +- Add baselibs.conf to src.rpm +* Tue Jan 4 2011 Carsten Munk <carsten@maemo.org> - 1.0 +- Part of BMC#12113 (speedrpm implementation) +- Add armv7hl and armv7nhl support +- Initial version on meego.com (based off Jan-Simon Moller's other -x86 packages) |