diff options
Diffstat (limited to 'packaging/sed-x86.spec')
| -rwxr-xr-x | packaging/sed-x86.spec | 323 |
1 files changed, 0 insertions, 323 deletions
diff --git a/packaging/sed-x86.spec b/packaging/sed-x86.spec deleted file mode 100755 index 80ab7fc..0000000 --- a/packaging/sed-x86.spec +++ /dev/null @@ -1,323 +0,0 @@ -%define __strip /bin/true -%define _build_name_fmt %%{ARCH}/%%{NAME}-%%{VERSION}-%%{RELEASE}.%%{ARCH}.vanish.rpm -# meta spec file for cross-chroot setup -# -# Copyright (c) 2009-2011 Martin Mohring (martin.mohring@opensuse.org) -# Copyright (c) 2011 5eEcoSystems (info@5eecosystems.com) -# -# All modifications and additions to the file contributed by third parties -# remain the property of the copyright owners, unless otherwise agreed -# upon. The cross build accelerators as is, and modifications -# and additions to the it, are licensed under the GPLv2. -# In addition, the cross build accelerators are licensed together with -# a package where they will be contained in -# under the license of the prestine package (unless the -# license for the pristine package is not an Open Source License, in which -# case the license is the MIT License). An "Open Source License" is a -# license that conforms to the Open Source Definition (Version 1.9) -# published by the Open Source Initiative. - -#\/\/\/\/\/\/\/\/\/\/ -### only changes here - -# -# The original package name -%define oldname sed - -# -# The architectures this meta package is built on -%define myexclusive i586 - -# -# The required package for building this package -# This can be distribution dependent. Good start is: -# e.g. rpm grep tar sed patchelf -# -BuildRequires: rpm grep tar sed patchelf - -# -# Additional required packages needed in addition to those of original package -# e.g. (usually empty) for an accelerator to be 100% compatible -# -#Requires: <usuallyemptlylist> - -# For a real accelerator, also the old packge is required for compatibility -# pls change this only if you know what you do -Requires: %oldname - -# -# Release under which to put the accelerator -# e.g. 1 or higher -# -Release: 8.3 - -### no changes needed below this line -# ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - -### no changes needed -# -# The new package name - convention is %oldname-x86 -%define newname %{oldname}-x86 -# -# The version of the original package is read from its rpm db info -%{expand:%%define newversion %(rpm -q --qf '[%{version}]' %oldname)} -# -# The license of the original package is read from its rpm db info -%{expand:%%define newlicense %(rpm -q --qf '[%{license}]' %oldname)} -# -# The group information of the original package -%{expand:%%define newgroup %(rpm -q --qf '[%{group}]' %oldname)} -# -# The summary of the original package -%{expand:%%define newsummary %(rpm -q --qf '[%{summary} - special version ]' %oldname)} -# -# New rpath to add to files on request -%define newrpath "/emul/ia32-linux/lib:/emul/ia32-linux/usr/lib" -%define newinterpreter /emul/ia32-linux/lib/ld-linux.so.2 -# -# Some automatic checks for availability -# binaries_to_prepare -%define binaries_to_prepare %{expand:%(test -e %{_sourcedir}/binaries_to_prepare && echo 1 || echo 0)} -%define libraries_to_prepare %{expand:%(test -e %{_sourcedir}/libraries_to_prepare && echo 1 || echo 0)} -%define special_script %{expand:%(test -e %{_sourcedir}/special_script && echo 1 || echo 0)} -%define files_to_ignore %{expand:%(test -e %{_sourcedir}/files_to_ignore && echo 1 || echo 0)} -# -### no changes needed below this line -%define nodebug 1 - - -Name: %newname -Version: %newversion -AutoReqProv: 0 -Provides: %newname -BuildRequires: %oldname -# no auto requirements - they're generated -License: %newlicense -Group: %newgroup -ExclusiveArch: %myexclusive -Summary: Dont use %newsummary ! -BuildRoot: %{_tmppath}/%{name}-%{version}-build -%if %binaries_to_prepare -Source10: binaries_to_prepare -%endif -%if %libraries_to_prepare -Source20: libraries_to_prepare -%endif -%if %special_script -Source30: special_script -%endif -%if %files_to_ignore -Source40: files_to_ignore -%endif -Source100: baselibs.conf - -%description -This is a meta-package providing %name. -It is not intended to be used on a normal system/device! -Original description: -%{expand:%(rpm -q --qf '[%{description}]' %oldname)} - - - -%prep - -%build - -%install -%if %nodebug -set +x -%endif -mkdir -p %buildroot -rpm -ql %oldname > filestoinclude1 - -# ignore files - construct sed script -sedtmp="sedtmp.$$" -echo "s#^%{_docdir}.*##" >> $sedtmp -echo "s#^%{_mandir}.*##" >> $sedtmp -echo "s#^%{_infodir}.*##" >> $sedtmp - -# evaluate files_to_ignore -%if %files_to_ignore -for i in `cat %{_sourcedir}/files_to_ignore`; do - echo "Ignoring file: $i" - echo "s#^${i}.*##" >> $sedtmp -done -%endif - -# ignore default filesystem files -for i in `rpm -ql filesystem`; do - echo "s#^${i}\$##" >> $sedtmp -done - -#finish up -echo "/^\$/d" >> $sedtmp - -#execute -sed -f $sedtmp -i filestoinclude1 - -# tar copy to buildroot -tar -T filestoinclude1 -cpf - | ( cd %buildroot && tar -xpf - ) -rm filestoinclude1 - -# Todo: refractor -# no directories, in filelist -find %buildroot > filestoinclude2 -cat filestoinclude2 | sed -e "s#%{buildroot}##g" | uniq | sort > filestoinclude1 -for i in `cat filestoinclude1`; do -# no directories - if ! test -d %buildroot/$i ; then - # - echo "$i" >> filestoinclude - fi -done -rm filestoinclude1 -rm filestoinclude2 - -# patchelf the binaries -%if %binaries_to_prepare -echo "" -echo "[ .oO Preparing binaries Oo. ]" -echo "" -mkdir -p %buildroot/%{_prefix}/share/applybinary/ -for binary in `cat %{_sourcedir}/binaries_to_prepare` ; do - echo "Processing binary: $binary" - tmp="tmp.$$" -%if %nodebug - debug= -%else - debug="--debug" -%endif - if file $binary | grep -q dynamic; then - ldd $binary | grep -v "ld-linux" | grep -v "linux-gate" | sed -e "s#=.*##g" -e "s#^\t*##g" > $tmp - deps=$(for i in `cat $tmp` ; do rpm -q --whatprovides "$i" | grep -v "no package"; done) - cleandeps=$(echo "$cleandeps" "$deps" | sort | uniq | sed -e "s/-[0-9].*//g") - patchelf $debug --set-rpath %newrpath %buildroot/$binary - patchelf $debug --set-interpreter %newinterpreter %buildroot/$binary - patchelf $debug --set-rpath %newrpath %buildroot/$binary - patchelf $debug --set-interpreter %newinterpreter %buildroot/$binary - if test -n "$debug"; then - patchelf --print-rpath %buildroot/$binary - patchelf --print-interpreter %buildroot/$binary - fi - fi - echo "$binary" >> %buildroot/%{_prefix}/share/applybinary/%name - echo "" -done -%endif - -# stub -%if %libraries_to_prepare -echo "" -echo "[ .oO Preparing libraries Oo. ]" -echo "" -%endif - -# stub -%if %special_script -echo "" -echo "[ .oO Executing special script Oo. ]" -echo "" -%endif - -# lets start the shellquote nightmare ;) -shellquote() -{ - for arg; do - arg=${arg//\\/\\\\} -# arg=${arg//\$/\$} # already needs quoting ;( -# arg=${arg/\"/\\\"} # dito -# arg=${arg//\`/\`} # dito - arg=${arg//\\|/\|} - arg=${arg//\\|/|} - echo "$arg" - done -} - - -echo "Creating baselibs_new.conf" -echo "" -rm -rRf /tmp/baselibs_new.conf || true - -shellquote "%{name}" >> /tmp/baselibs_new.conf -shellquote " targettype x86 block!" >> /tmp/baselibs_new.conf -shellquote " targettype 32bit block!" >> /tmp/baselibs_new.conf -shellquote " targettype arm autoreqprov off" >> /tmp/baselibs_new.conf - -# automagically fill in basic requirements -for i in $cleandeps ; do - shellquote " targettype arm requires \"${i}-x86-arm\"" >> /tmp/baselibs_new.conf -done - -# we require the native version -shellquote " targettype arm requires \"%{oldname}\" " >> /tmp/baselibs_new.conf -shellquote " targettype arm prefix /emul/ia32-linux" >> /tmp/baselibs_new.conf -shellquote " targettype arm extension -arm" >> /tmp/baselibs_new.conf -shellquote " targettype arm +/" >> /tmp/baselibs_new.conf - -# safe space and download time -shellquote " targettype arm -/%{_mandir}" >> /tmp/baselibs_new.conf -shellquote " targettype arm -/%{_docdir}" >> /tmp/baselibs_new.conf -shellquote " targettype arm requires \"tizen-accelerator\"" >> /tmp/baselibs_new.conf - -# replace native with x86 binaries as defined in file -%if %binaries_to_prepare -# Todo: error handling if .orig-arm is present -for binary in `cat %{_sourcedir}/binaries_to_prepare` ; do - shellquote " targettype arm post \" if test -e ${binary}.orig-arm -a -h ${binary}; then \" " >> /tmp/baselibs_new.conf - shellquote " targettype arm post \" echo \"${binary}.orig-arm already present - skipping.\" \" " >> /tmp/baselibs_new.conf - shellquote " targettype arm post \" else \" " >> /tmp/baselibs_new.conf - shellquote " targettype arm post \" mv ${binary} ${binary}.orig-arm ; ln -s <prefix>${binary} ${binary} \"" >> /tmp/baselibs_new.conf - shellquote " targettype arm post \" fi \" " >> /tmp/baselibs_new.conf -done - -# shellquote " targettype arm post \"# XXX this is klunky and ugly, rpm itself should handle this\" " >> /tmp/baselibs_new.conf -# shellquote " targettype arm post \"dbstat=/usr/lib/rpm/rpmdb_stat\" " >> /tmp/baselibs_new.conf -# shellquote " targettype arm post \"if [ -x "\$dbstat" ]; then\" " >> /tmp/baselibs_new.conf -# shellquote " targettype arm post \" if "\$dbstat" -e -h /var/lib/rpm 2>&1 \| grep -q \"t match environment version\"; then\" " >> /tmp/baselibs_new.conf -# shellquote " targettype arm post \" file /bin/rpm ; rm -f /var/lib/rpm/__db.* && rpm --rebuilddb \" " >> /tmp/baselibs_new.conf -# shellquote " targettype arm post \" fi\" " >> /tmp/baselibs_new.conf -# shellquote " targettype arm post \"fi\" " >> /tmp/baselibs_new.conf - - -shellquote " " >> /tmp/baselibs_new.conf -for binary in `cat %{_sourcedir}/binaries_to_prepare` ; do - - shellquote " targettype arm preun \" if test -e ${binary}.orig-arm ; then \"" >> /tmp/baselibs_new.conf - shellquote " targettype arm preun \" rm -f ${binary} ; mv ${binary}.orig-arm ${binary}\"" >> /tmp/baselibs_new.conf - shellquote " targettype arm preun \" fi \"" >> /tmp/baselibs_new.conf - -done -%endif - -cat /tmp/baselibs_new.conf >> %{_sourcedir}/baselibs.conf - -echo "################################################################################" -echo "" -echo "" -echo "REQUIREMENTS:" -grep "requires" %{_sourcedir}/baselibs.conf | sort | uniq | sed -e "s# targettype.*requires ##g" | while read k ; do - echo "CBinstall: $k" -done -echo "Runscripts: %{newname}-arm" -echo "" -echo "" -echo "################################################################################" -set -x - -%clean -rm -rf $RPM_BUILD_ROOT - -%files -f filestoinclude -%defattr(-,root,root) -%if %binaries_to_prepare -/%{_prefix}/share/applybinary/%name -%endif -%changelog -* Fri Jul 6 2012 UkJung Kim <ujkim@samsung.com> - 1.0 -- Added and updated OBS-Accelerator-0.1.tar.bz2 -* Sun Apr 24 2011 Jan-Simon Möller <jsmoeller@linuxfoundation.org> - 1.0 -- Add baselibs.conf to src.rpm -* Tue Jan 4 2011 Carsten Munk <carsten@maemo.org> - 1.0 -- Part of BMC#12113 (speedrpm implementation) -- Add armv7hl and armv7nhl support -- Initial version on meego.com (based off Jan-Simon Moller's other -x86 packages) |