diff options
Diffstat (limited to 'arch/arm/dts/am335x-brppt1-spi.dts')
| -rw-r--r-- | arch/arm/dts/am335x-brppt1-spi.dts | 377 |
1 files changed, 0 insertions, 377 deletions
diff --git a/arch/arm/dts/am335x-brppt1-spi.dts b/arch/arm/dts/am335x-brppt1-spi.dts deleted file mode 100644 index ce3dce204d..0000000000 --- a/arch/arm/dts/am335x-brppt1-spi.dts +++ /dev/null @@ -1,377 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2018 B&R Industrial Automation GmbH - * http://www.br-automation.com - * - */ -/dts-v1/; - -#include "am33xx.dtsi" - -/ { - model = "BRPPT1 (MMC) Panel"; - compatible = "ti,am33xx"; - - fset: factory-settings { - bl-version = "ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456890"; - version = <0x0100>; - order-no = "6PPT30 (SPI)"; - hw-revision = "ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456890"; - serial-no = "0"; - device-id = <0x0>; - parent-id = <0x0>; - hw-variant = <0x1>; - }; - - aliases { - ds1bkl0 = &pwmbacklight; - ds1bkl1 = &tps_bl; - ds1timing = &timing0; - ds1ctrl = &lcdc; - gpmc = &gpmc; - mmc = &mmc2; - spi0 = &spi0; - fset = &fset; - }; - - chosen { - bootargs = "console=ttyO0,115200 earlyprintk"; - stdout-path = &uart0; - }; - - memory { - device_type = "memory"; - reg = <0x80000000 0x10000000>; /* 256 MB */ - }; - - panel { - status = "disabled"; - - compatible = "ti,tilcdc,panel"; - enable-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; - - backlight = <&pwmbacklight>; - bkl-pwm = <&pwmbacklight>; - bkl-tps = <&tps_bl>; - - panel-info { - ac-bias = <255>; - ac-bias-intrpt = <0>; - dma-burst-sz = <16>; - bpp = <32>; - fdd = <0x80>; - sync-edge = <0>; - sync-ctrl = <1>; - raster-order = <0>; - fifo-th = <0>; - }; - - display-timings { - native-mode = <&timing0>; - timing0: lcd { - clock-frequency = <32000000>; - hactive = <800>; - vactive = <480>; - hfront-porch = <2>; - hback-porch = <192>; - hsync-len = <1>; - vfront-porch = <20>; - vback-porch = <2>; - vsync-len = <1>; - hsync-active = <1>; - vsync-active = <1>; - pupdelay = <10>; - pondelay = <10>; - }; - }; - }; - - vmmcsd_fixed: fixedregulator@0 { - compatible = "regulator-fixed"; - regulator-name = "vmmcsd_fixed"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - pwm0: omap-pwm@timer5 { - compatible = "ti,omap-dmtimer-pwm"; - ti,timers = <&timer5>; - #pwm-cells = <3>; - }; - - pwm1: omap-pwm@timer6 { - compatible = "ti,omap-dmtimer-pwm"; - ti,timers = <&timer6>; - #pwm-cells = <3>; - }; - - beeper: pwm-beep { - compatible = "pwm-beeper"; - pwms = <&pwm0 0 0 0>; - }; - - pwmbacklight: pwm-bkl { - compatible = "pwm-backlight"; - pwms = <&pwm1 0 5000000 0>; - - default-brightness-level = <255>; - brightness-levels = <0 16 32 64 128 170 202 234 255>; - - power-supply = <&vmmcsd_fixed>; - enable-gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; - }; -}; - -&uart0 { /* console uart */ - u-boot,dm-spl; - status = "okay"; -}; - -&uart1 { - status = "okay"; -}; - -&i2c0 { - u-boot,dm-spl; - status = "okay"; - clock-frequency = <400000>; - - tps: tps@24 { /* PMIC controller */ - u-boot,dm-spl; - reg = <0x24>; - compatible = "ti,tps65217"; - - tps_bl: backlight { - compatible = "ti,tps65217-bl"; - isel = <1>; /* 1 - ISET1, 2 ISET2 */ - fdim = <1000>; /* TPS65217_BL_FDIM_1kHZ */ - default-brightness = <50>; - }; - }; -}; - -&i2c2 { - status = "okay"; - clock-frequency = <100000>; -}; - -&spi0 { - u-boot,dm-spl; - status = "okay"; - - cs-gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>, - <&gpio0 6 GPIO_ACTIVE_HIGH>, - <0>, - <0>; - - spi-max-frequency = <24000000>; - - spi_flash: spiflash@0 { - u-boot,dm-spl; - u-boot,dm-pre-reloc; - compatible = "spidev", "jedec,spi-nor"; - spi-max-frequency = <24000000>; - reg = <0>; - }; -}; - -&edma { - status = "okay"; -}; - -&cppi41dma { - status = "okay"; -}; - -&usb { - status = "okay"; -}; - -&usb_ctrl_mod { - status = "okay"; -}; - -&usb0_phy { - status = "okay"; -}; - -&usb1_phy { - status = "okay"; -}; - -&usb0 { - status = "okay"; - dr_mode = "host"; -}; - -&usb1 { - status = "okay"; - dr_mode = "host"; -}; - -&davinci_mdio { - status = "okay"; - - phy0: ethernet-phy@0 { - reg = <1>; - }; - - phy1: ethernet-phy@1 { - reg = <2>; - }; -}; - -&mac { - status = "okay"; -}; - -&cpsw_emac0 { - phy-handle = <&phy0>; - dual_emac_res_vlan = <1>; - phy-mode = "mii"; -}; - -&cpsw_emac1 { - phy-handle = <&phy1>; - dual_emac_res_vlan = <2>; - phy-mode = "mii"; -}; - -&mmc1 { - u-boot,dm-spl; - vmmc-supply = <&vmmcsd_fixed>; - bus-width = <0x4>; - ti,non-removable; - ti,needs-special-hs-handling; - ti,vcc-aux-disable-is-sleep; - status = "okay"; -}; - -&mmc2 { - u-boot,dm-spl; - vmmc-supply = <&vmmcsd_fixed>; - bus-width = <0x8>; - ti,non-removable; - ti,needs-special-hs-handling; - ti,vcc-aux-disable-is-sleep; - status = "okay"; -}; - -&l4_per { - - segment@300000 { - - target-module@e000 { - u-boot,dm-pre-reloc; - - lcdc: lcdc@0 { - u-boot,dm-pre-reloc; - status = "disabled"; - }; - }; - }; -}; - -&elm { - status = "okay"; -}; - -&sham { - status = "okay"; -}; - -&aes { - status = "okay"; -}; - -&gpio0 { - u-boot,dm-spl; - ti,no-reset-on-init; -}; - -&gpio1 { - u-boot,dm-spl; - ti,no-reset-on-init; -}; - -&gpio2 { - u-boot,dm-spl; - ti,no-reset-on-init; -}; - -&gpio3 { - u-boot,dm-spl; - ti,no-reset-on-init; -}; - -&wdt2 { - ti,no-reset-on-init; - ti,no-idle-on-init; -}; - -&tscadc { - status = "okay"; - tsc { - ti,wires = <4>; - ti,x-plate-resistance = <200>; - ti,zx-cutoff-ratio = <40>; - ti,min_deviation = <60>; - ti,max_deviation = <600>; - ti,coordinate-readouts = <5>; - ti,wire-config = <0x00 0x11 0x22 0x33>; - - bnr-buttons { - Home-Button {}; - }; - }; - - adc { - ti,adc-channels = <5 6 7>; - }; -}; - -&timer6 { /* used for cpsw end device */ - status = "okay"; - ti,no-reset-on-init; - ti,no-idle-on-init; -}; - -&timer7 { /* used for cpsw end device */ - status = "okay"; - ti,no-reset-on-init; - ti,no-idle-on-init; -}; - -&wdt2 { - status = "okay"; - ti,no-reset-on-init; - ti,no-idle-on-init; -}; - -&epwmss0 { - status = "okay"; -}; - -&tscadc { - status = "okay"; -}; - -&dcan0 { - status = "okay"; -}; - -&dcan1 { - status = "okay"; -}; - -&sham { - status = "disabled"; -}; - -&aes { - status = "disabled"; -}; - -&rng { - status = "disabled"; -}; |