diff options
Diffstat (limited to 'wearable/include')
| -rw-r--r-- | wearable/include/connection_profile.h | 772 | ||||
| -rw-r--r-- | wearable/include/net_connection.h | 621 | ||||
| -rw-r--r-- | wearable/include/net_connection_private.h | 108 |
3 files changed, 0 insertions, 1501 deletions
diff --git a/wearable/include/connection_profile.h b/wearable/include/connection_profile.h deleted file mode 100644 index 1f37c06..0000000 --- a/wearable/include/connection_profile.h +++ /dev/null @@ -1,772 +0,0 @@ -/* - * Copyright (c) 2011-2013 Samsung Electronics Co., Ltd All Rights Reserved - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#ifndef __TIZEN_NETWORK_CONNECTION_PROFILE_H__ -#define __TIZEN_NETWORK_CONNECTION_PROFILE_H__ - -#include <tizen.h> - -#ifdef __cplusplus -extern "C" { -#endif - -/** -* @addtogroup CAPI_NETWORK_CONNECTION_WIFI_PROFILE_MODULE -* @{ -*/ - -/** -* @brief Security type of Wi-Fi -*/ -typedef enum -{ - CONNECTION_WIFI_SECURITY_TYPE_NONE = 0, /**< Security disabled */ - CONNECTION_WIFI_SECURITY_TYPE_WEP = 1, /**< WEP */ - CONNECTION_WIFI_SECURITY_TYPE_WPA_PSK = 2, /**< WPA-PSK */ - CONNECTION_WIFI_SECURITY_TYPE_WPA2_PSK = 3, /**< WPA2-PSK */ - CONNECTION_WIFI_SECURITY_TYPE_EAP = 4, /**< EAP */ -} connection_wifi_security_type_e; - -/** -* @brief Below encryption modes are used in infrastructure and ad-hoc mode -*/ -typedef enum -{ - CONNECTION_WIFI_ENCRYPTION_TYPE_NONE = 0, /**< Encryption disabled */ - CONNECTION_WIFI_ENCRYPTION_TYPE_WEP = 1, /**< WEP */ - CONNECTION_WIFI_ENCRYPTION_TYPE_TKIP = 2, /**< TKIP */ - CONNECTION_WIFI_ENCRYPTION_TYPE_AES = 3, /**< AES */ - CONNECTION_WIFI_ENCRYPTION_TYPE_TKIP_AES_MIXED = 4, /**< TKIP and AES are both supported */ -} connection_wifi_encryption_type_e; - -/** -* @} -*/ - - -/** -* @addtogroup CAPI_NETWORK_CONNECTION_CELLULAR_PROFILE_MODULE -* @{ -*/ - -/** -* @brief This enumeration defines the cellular protocol type. -*/ -typedef enum -{ - CONNECTION_CELLULAR_NETWORK_TYPE_UNKNOWN = 0, /**< Not defined */ - CONNECTION_CELLULAR_NETWORK_TYPE_GPRS = 1, /**< GPRS type */ - CONNECTION_CELLULAR_NETWORK_TYPE_EDGE = 2, /**< EDGE type */ - CONNECTION_CELLULAR_NETWORK_TYPE_UMTS = 3, /**< UMTS type */ -} connection_cellular_network_type_e; - -/** -* @breif This enum indicates cellular service type -*/ -typedef enum -{ - CONNECTION_CELLULAR_SERVICE_TYPE_UNKNOWN = 0, /**< Unknown */ - CONNECTION_CELLULAR_SERVICE_TYPE_INTERNET = 1, /**< Internet */ - CONNECTION_CELLULAR_SERVICE_TYPE_MMS = 2, /**< MMS */ - CONNECTION_CELLULAR_SERVICE_TYPE_PREPAID_INTERNET = 3, /**< Prepaid internet */ - CONNECTION_CELLULAR_SERVICE_TYPE_PREPAID_MMS = 4, /**< Prepaid MMS */ - CONNECTION_CELLULAR_SERVICE_TYPE_TETHERING = 5, /**< Tethering */ - CONNECTION_CELLULAR_SERVICE_TYPE_APPLICATION = 6, /**< Specific application */ -} connection_cellular_service_type_e; - -/** -* @brief Cellular Authentication Type -*/ -typedef enum -{ - CONNECTION_CELLULAR_AUTH_TYPE_NONE = 0, /**< No authentication */ - CONNECTION_CELLULAR_AUTH_TYPE_PAP = 1, /**< PAP authentication */ - CONNECTION_CELLULAR_AUTH_TYPE_CHAP = 2, /**< CHAP authentication */ -} connection_cellular_auth_type_e; - -/** -* @} -*/ - - -/** -* @addtogroup CAPI_NETWORK_CONNECTION_PROFILE_MODULE -* @{ -*/ - -/** -* @brief The handle of profile -*/ -typedef void* connection_profile_h; - -/** -* @brief This enumeration defines the profile state type. -*/ -typedef enum -{ - CONNECTION_PROFILE_STATE_DISCONNECTED = 0, /**< Disconnected state */ - CONNECTION_PROFILE_STATE_ASSOCIATION = 1, /**< Association state */ - CONNECTION_PROFILE_STATE_CONFIGURATION = 2, /**< Configuration state */ - CONNECTION_PROFILE_STATE_CONNECTED = 3, /**< Connected state */ -} connection_profile_state_e; - -/** -* @brief Enumerations of Address family -*/ -typedef enum -{ - CONNECTION_ADDRESS_FAMILY_IPV4 = 0, /**< IPV4 Address type */ - CONNECTION_ADDRESS_FAMILY_IPV6 = 1, /**< IPV6 Address type */ -} connection_address_family_e; - -/** -* @brief Net IP configuration Type -*/ -typedef enum -{ - CONNECTION_IP_CONFIG_TYPE_NONE = 0, /**< Not defined */ - CONNECTION_IP_CONFIG_TYPE_STATIC = 1, /**< Manual IP configuration */ - CONNECTION_IP_CONFIG_TYPE_DYNAMIC = 2, /**< Config IP using DHCP client*/ - CONNECTION_IP_CONFIG_TYPE_AUTO = 3, /**< Config IP from Auto IP pool (169.254/16). Later with DHCP client, if available */ - CONNECTION_IP_CONFIG_TYPE_FIXED = 4, /**< Indicates an IP address that can not be modified */ -} connection_ip_config_type_e; - -/** -* @brief This enumeration defines the proxy method type. -*/ -typedef enum -{ - CONNECTION_PROXY_TYPE_DIRECT = 0, /**< Direct connection */ - CONNECTION_PROXY_TYPE_AUTO = 1, /**< Auto configuration(Use PAC file). If URL property is not set, DHCP/WPAD auto-discover will be tried */ - CONNECTION_PROXY_TYPE_MANUAL = 2, /**< Manual configuration */ -} connection_proxy_type_e; - -/** -* @enum connection_profile_type_e -* @brief Enumerations of network connection type. -*/ -typedef enum{ - CONNECTION_PROFILE_TYPE_CELLULAR = 0, /**< Cellular type */ - CONNECTION_PROFILE_TYPE_WIFI = 1, /**< Wi-Fi type */ - CONNECTION_PROFILE_TYPE_ETHERNET = 2, /**< Ethernet type */ - CONNECTION_PROFILE_TYPE_BT = 3, /**< Bluetooth type */ -} connection_profile_type_e; - -/** -* @brief Creates the profile handle. -* @details The profile name, which is got from connection_profile_get_name(), will include the keyword you set. -* @remarks @a profile must be released with connection_profile_destroy(). -* @param[in] type The type of profile. #CONNECTION_PROFILE_TYPE_CELLULAR is only supported. -* @param[in] keyword The keyword included in profile name -* @param[out] profile The handle of the profile -* @return 0 on success, otherwise negative error value. -* @retval #CONNECTION_ERROR_NONE Successful -* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter -* @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory -* @see connection_profile_destroy() -* @see connection_profile_get_name() -*/ -int connection_profile_create(connection_profile_type_e type, const char* keyword, connection_profile_h* profile); - -/** -* @brief Destroys the profile handle. -* @param[out] connection The handle to the connection -* @return 0 on success, otherwise negative error value. -* @retval #CONNECTION_ERROR_NONE Successful -* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter -* @see connection_profile_create() -*/ -int connection_profile_destroy(connection_profile_h profile); - -/** -* @brief Clons the profile handle. -* @remarks @a cloned_profile must be released with connection_profile_destroy(). -* @param[in] origin_profile The handle of origin profile -* @param[out] cloned_profile The handle of cloned profile -* @return 0 on success, otherwise negative error value. -* @retval #CONNECTION_ERROR_NONE Successful -* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter -* @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory -* @see connection_profile_destroy() -*/ -int connection_profile_clone(connection_profile_h* cloned_profile, connection_profile_h origin_profile); - -/** -* @brief Gets the profile ID. -* @details The separate profiles can have the same name. -* So, you must use this API instead of connection_profile_get_name() if you want to get the unique identification. -* In case that you create a profile, this value will be determined when you add the profile. -* @remarks @a profile_id must be released with free() by you. -* @param[in] profile The handle of profile -* @param[out] profile_id The ID of profile -* @return 0 on success, otherwise negative error value. -* @retval #CONNECTION_ERROR_NONE Successful -* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter -* @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory -* @see connection_profile_get_name() -* @see connection_add_profile() -*/ -int connection_profile_get_id(connection_profile_h profile, char** profile_id); - -/** -* @brief Gets the profile name. -* @remarks @a profile_name must be released with free() by you. -* @param[in] profile The handle of profile -* @param[out] profile_name The name of profile -* @return 0 on success, otherwise negative error value. -* @retval #CONNECTION_ERROR_NONE Successful -* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter -* @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory -* @see connection_profile_get_id() -*/ -int connection_profile_get_name(connection_profile_h profile, char** profile_name); - -/** -* @brief Gets the network type. -* @param[in] profile The handle of profile -* @param[out] type The type of profile -* @return 0 on success, otherwise negative error value. -* @retval #CONNECTION_ERROR_NONE Successful -* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter -* @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed -*/ -int connection_profile_get_type(connection_profile_h profile, connection_profile_type_e* type); - -/** -* @brief Gets the name of network interface. For example, eth0 and pdp0. -* @remarks @a interface_name must be released with free() by you. -* @param[in] profile The handle of profile -* @param[out] interface_name The name of network interface -* @return 0 on success, otherwise negative error value. -* @retval #CONNECTION_ERROR_NONE Successful -* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter -* @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory -*/ -int connection_profile_get_network_interface_name(connection_profile_h profile, char** interface_name); - -/** -* @brief Refresh the profile information. -* @remarks You should call this function in order to get the current information because the profile information can be changed. -* @param[in] profile The handle of profile -* @return 0 on success, otherwise negative error value. -* @retval #CONNECTION_ERROR_NONE Successful -* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter -* @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed -* @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory -*/ -int connection_profile_refresh(connection_profile_h profile); - -/** -* @brief Gets the network type. -* @param[in] profile The handle of profile -* @param[out] state The state of profile -* @return 0 on success, otherwise negative error value. -* @retval #CONNECTION_ERROR_NONE Successful -* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter -* @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed -*/ -int connection_profile_get_state(connection_profile_h profile, connection_profile_state_e* state); - -/** -* @brief Gets the IP config type. -* @param[in] profile The handle of profile -* @param[in] address_family The address family -* @param[out] type The type of IP config -* @return 0 on success, otherwise negative error value. -* @retval #CONNECTION_ERROR_NONE Successful -* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter -* @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed -*/ -int connection_profile_get_ip_config_type(connection_profile_h profile, connection_address_family_e address_family, connection_ip_config_type_e* type); - -/** -* @brief Gets the IP address. -* @remarks @a ip_address must be released with free() by you. -* @param[in] profile The handle of profile -* @param[in] address_family The address family -* @param[out] ip_address The IP address -* @return 0 on success, otherwise negative error value. -* @retval #CONNECTION_ERROR_NONE Successful -* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter -* @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory -* @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family -* @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed -*/ -int connection_profile_get_ip_address(connection_profile_h profile, connection_address_family_e address_family, char** ip_address); - -/** -* @brief Gets the Subnet Mask. -* @remarks @a subnet_mask must be released with free() by you. -* @param[in] profile The handle of profile -* @param[in] address_family The address family -* @param[out] subnet_mask The subnet mask -* @return 0 on success, otherwise negative error value. -* @retval #CONNECTION_ERROR_NONE Successful -* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter -* @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory -* @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family -* @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed -*/ -int connection_profile_get_subnet_mask(connection_profile_h profile, connection_address_family_e address_family, char** subnet_mask); - -/** -* @brief Gets the Gateway address. -* @remarks @a gateway_address must be released with free() by you. -* @param[in] profile The handle of profile -* @param[in] address_family The address family -* @param[out] gateway_address The gateway address -* @return 0 on success, otherwise negative error value. -* @retval #CONNECTION_ERROR_NONE Successful -* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter -* @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory -* @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family -* @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed -*/ -int connection_profile_get_gateway_address(connection_profile_h profile, connection_address_family_e address_family, char** gateway_address); - -/** -* @brief Gets the DNS address. -* @remarks The allowance of DNS address is 2. @a dns_address must be released with free() by you. -* @param[in] profile The handle of profile -* @param[in] order The order of DNS address. It starts from 1, which means first DNS address. -* @param[in] address_family The address family -* @param[out] dns_address The DNS address -* @return 0 on success, otherwise negative error value. -* @retval #CONNECTION_ERROR_NONE Successful -* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter -* @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory -* @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family -* @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed -*/ -int connection_profile_get_dns_address(connection_profile_h profile, int order, connection_address_family_e address_family, char** dns_address); - -/** -* @brief Gets the Proxy type. -* @param[in] profile The handle of profile -* @param[out] type The type of proxy -* @return 0 on success, otherwise negative error value. -* @retval #CONNECTION_ERROR_NONE Successful -* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter -* @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed -*/ -int connection_profile_get_proxy_type(connection_profile_h profile, connection_proxy_type_e* type); - -/** -* @brief Gets the Proxy address. -* @remarks @a proxy_address must be released with free() by you. -* @param[in] profile The handle of profile -* @param[in] address_family The address family -* @param[out] proxy_address The proxy address -* @return 0 on success, otherwise negative error value. -* @retval #CONNECTION_ERROR_NONE Successful -* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter -* @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory -* @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family -* @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed -*/ -int connection_profile_get_proxy_address(connection_profile_h profile, connection_address_family_e address_family, char** proxy_address); - -/** -* @brief Sets the IP config type. -* @details If you set IP config type to #WIFI_IP_CONFIG_TYPE_STATIC, -* then IP address, Gateway and Subnet mask will be set to the initial value "0.0.0.0". -* @param[in] profile The handle of profile -* @param[in] address_family The address family -* @param[in] type The type of IP config -* @return 0 on success, otherwise negative error value. -* @retval #CONNECTION_ERROR_NONE Successful -* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter -* @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed -*/ -int connection_profile_set_ip_config_type(connection_profile_h profile, connection_address_family_e address_family, connection_ip_config_type_e type); - -/** -* @brief Sets the IP address. -* @param[in] profile The handle of profile -* @param[in] address_family The address family -* @param[in] ip_address The IP address. If you set this value to NULL, then the existing value will be deleted. -* @return 0 on success, otherwise negative error value. -* @retval #CONNECTION_ERROR_NONE Successful -* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter -* @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family -* @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed -* @see connection_update_profile() -*/ -int connection_profile_set_ip_address(connection_profile_h profile, connection_address_family_e address_family, const char* ip_address); - -/** -* @brief Sets the Subnet Mask. -* @param[in] profile The handle of profile -* @param[in] address_family The address family -* @param[in] subnet_mask The subnet mask. If you set this value to NULL, then the existing value will be deleted. -* @return 0 on success, otherwise negative error value. -* @retval #CONNECTION_ERROR_NONE Successful -* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter -* @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family -* @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed -* @see connection_update_profile() -*/ -int connection_profile_set_subnet_mask(connection_profile_h profile, connection_address_family_e address_family, const char* subnet_mask); - -/** -* @brief Sets the Gateway address. -* @param[in] profile The handle of profile -* @param[in] address_family The address family -* @param[in] gateway_address The gateway address. If you set this value to NULL, then the existing value will be deleted. -* @return 0 on success, otherwise negative error value. -* @retval #CONNECTION_ERROR_NONE Successful -* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter -* @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family -* @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed -* @see connection_update_profile() -*/ -int connection_profile_set_gateway_address(connection_profile_h profile, connection_address_family_e address_family, const char* gateway_address); - -/** -* @brief Sets the DNS address. -* @remarks The allowance of DNS address is 2. -* @param[in] profile The handle of profile -* @param[in] order The order of DNS address. It starts from 1, which means first DNS address. -* @param[in] address_family The address family -* @param[in] dns_address The DNS address. If you set this value to NULL, then the existing value will be deleted. -* @return 0 on success, otherwise negative error value. -* @retval #CONNECTION_ERROR_NONE Successful -* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter -* @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family -* @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed -* @see connection_update_profile() -*/ -int connection_profile_set_dns_address(connection_profile_h profile, int order, connection_address_family_e address_family, const char* dns_address); - -/** -* @brief Sets the Proxy type. -* @details If you set Proxy type to #WIFI_PROXY_TYPE_AUTO or #WIFI_PROXY_TYPE_MANUAL, then Proxy will be restored. -* @param[in] profile The handle of profile -* @param[in] type The type of proxy -* @return 0 on success, otherwise negative error value. -* @retval #CONNECTION_ERROR_NONE Successful -* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter -* @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed -* @see connection_update_profile() -*/ -int connection_profile_set_proxy_type(connection_profile_h profile, connection_proxy_type_e type); - -/** -* @brief Sets the Proxy address. -* @param[in] profile The handle of profile -* @param[in] address_family The address family -* @param[in] proxy_address The proxy address. If you set this value to NULL, then the existing value will be deleted. -* @return 0 on success, otherwise negative error value. -* @retval #CONNECTION_ERROR_NONE Successful -* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter -* @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family -* @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed -* @see connection_update_profile() -*/ -int connection_profile_set_proxy_address(connection_profile_h profile, connection_address_family_e address_family, const char* proxy_address); - -/** -* @brief Called when the state of profile is changed. -* @param[in] state The state -* @param[in] user_data The user data passed from the callback registration function -* @see connection_profile_set_state_changed_cb() -* @see connection_profile_unset_state_changed_cb() -*/ -typedef void(*connection_profile_state_changed_cb)(connection_profile_state_e state, void* user_data); - -/** -* @brief Registers the callback called when the state of profile is changed. -* @param[in] profile The handle of profile -* @param[in] callback The callback function to be called -* @param[in] user_data The user data passed to the callback function -* @return 0 on success, otherwise negative error value. -* @retval #CONNECTION_ERROR_NONE Successful -* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter -* @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed -* @post connection_opened_cb() is invoked when the state of profile is changed. -* @see connection_profile_state_changed_cb() -* @see connection_profile_unset_state_changed_cb() -*/ -int connection_profile_set_state_changed_cb(connection_profile_h profile, connection_profile_state_changed_cb callback, void* user_data); - -/** -* @brief Unregisters the callback called when the state of profile is changed. -* @param[in] profile The handle of profile -* @return 0 on success, otherwise negative error value. -* @retval #CONNECTION_ERROR_NONE Successful -* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter -* @see connection_profile_state_changed_cb() -* @see connection_profile_set_state_changed_cb() -*/ -int connection_profile_unset_state_changed_cb(connection_profile_h profile); - -/** -* @} -*/ - - -/** -* @addtogroup CAPI_NETWORK_CONNECTION_WIFI_PROFILE_MODULE -* @{ -*/ - -/** -* @brief Gets the ESSID(Extended Service Set Identifier). -* @remarks @a essid must be released with free() by you. -* @param[in] profile The handle of profile -* @param[out] essid The ESSID -* @return 0 on success, otherwise negative error value. -* @retval #CONNECTION_ERROR_NONE Successful -* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter -* @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory -*/ -int connection_profile_get_wifi_essid(connection_profile_h profile, char** essid); - -/** -* @brief Gets the BSSID(Basic Service Set Identifier). -* @remarks @a bssid must be released with free() by you. -* @param[in] profile The handle of profile -* @param[out] bssid The BSSID -* @return 0 on success, otherwise negative error value. -* @retval #CONNECTION_ERROR_NONE Successful -* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter -* @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory -*/ -int connection_profile_get_wifi_bssid(connection_profile_h profile, char** bssid); - -/** -* @brief Gets the RSSI. -* @param[in] profile The handle of profile -* @param[out] rssi The RSSI -* @return 0 on success, otherwise negative error value. -* @retval #CONNECTION_ERROR_NONE Successful -* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter -*/ -int connection_profile_get_wifi_rssi(connection_profile_h profile, int* rssi); - -/** -* @brief Gets the frequency (MHz). -* @param[in] profile The handle of profile -* @param[out] frequency The frequency -* @return 0 on success, otherwise negative error value. -* @retval #CONNECTION_ERROR_NONE Successful -* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter -*/ -int connection_profile_get_wifi_frequency(connection_profile_h profile, int* frequency); - -/** -* @brief Gets the max speed (Mbps). -* @param[in] profile The handle of profile -* @param[out] max_speed The max speed -* @return 0 on success, otherwise negative error value. -* @retval #CONNECTION_ERROR_NONE Successful -* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter -*/ -int connection_profile_get_wifi_max_speed(connection_profile_h profile, int* max_speed); - -/** -* @brief Gets the security mode of Wi-Fi. -* @param[in] profile The handle of profile -* @param[out] type The type of Wi-Fi security -* @return 0 on success, otherwise negative error value. -* @retval #CONNECTION_ERROR_NONE Successful -* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter -* @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed -*/ -int connection_profile_get_wifi_security_type(connection_profile_h profile, connection_wifi_security_type_e* type); - -/** -* @brief Gets the security mode of Wi-Fi. -* @param[in] profile The handle of profile -* @param[out] type The type of Wi-Fi security -* @return 0 on success, otherwise negative error value. -* @retval #CONNECTION_ERROR_NONE Successful -* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter -* @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed -*/ -int connection_profile_get_wifi_encryption_type(connection_profile_h profile, connection_wifi_encryption_type_e* type); - -/** -* @brief Checks whether passphrase is required. -* @remarks This function is not valid if security type is #WIFI_SECURITY_TYPE_EAP. -* @param[in] profile The handle of profile -* @param[out] required Indicates whether passphrase is required or not -* @return 0 on success, otherwise negative error value. -* @retval #CONNECTION_ERROR_NONE Successful -* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter -*/ -int connection_profile_is_wifi_passphrase_required(connection_profile_h profile, bool* required); - -/** -* @brief Sets the passphrase of Wi-Fi WPA. -* @param[in] profile The handle of profile -* @param[in] passphrase The passphrase of Wi-Fi security -* @return 0 on success, otherwise negative error value. -* @retval #CONNECTION_ERROR_NONE Successful -* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter -* @see connection_update_profile() -*/ -int connection_profile_set_wifi_passphrase(connection_profile_h profile, const char* passphrase); - -/** -* @brief Checks whether WPS(Wi-Fi Protected Setup) is supported. -* @remarks If WPS is supported, you can connect access point with WPS by wifi_connect_with_wps(). -* @param[in] profile The handle of profile -* @param[out] supported Indicates whether WPS is supported or not -* @return 0 on success, otherwise negative error value. -* @retval #CONNECTION_ERROR_NONE Successful -* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter -*/ -int connection_profile_is_wifi_wps_supported(connection_profile_h profile, bool* supported); - -/** -* @} -*/ - - -/** -* @addtogroup CAPI_NETWORK_CONNECTION_CELLULAR_PROFILE_MODULE -* @{ -*/ - -/** -* @brief Gets the cellular network type. -* @param[in] profile The handle of profile -* @param[out] type The type of cellular -* @return 0 on success, otherwise negative error value. -* @retval #CONNECTION_ERROR_NONE Successful -* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter -* @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed -*/ -int connection_profile_get_cellular_network_type(connection_profile_h profile, connection_cellular_network_type_e* type); - -/** -* @brief Gets the service type. -* @param[in] profile The handle of profile -* @param[out] type The type of cellular service -* @return 0 on success, otherwise negative error value. -* @retval #CONNECTION_ERROR_NONE Successful -* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter -* @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed -*/ -int connection_profile_get_cellular_service_type(connection_profile_h profile, connection_cellular_service_type_e* type); - -/** -* @brief Gets the APN(access point name). -* @remarks @a apn must be released with free() by you. -* @param[in] profile The handle of profile -* @param[out] apn The name of APN -* @return 0 on success, otherwise negative error value. -* @retval #CONNECTION_ERROR_NONE Successful -* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter -* @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory -*/ -int connection_profile_get_cellular_apn(connection_profile_h profile, char** apn); - -/** -* @brief Gets the authentication information. -* @remarks @a user_name and @a password must be released with free() by you. -* @param[in] profile The handle of profile -* @param[out] type The type of authentication -* @param[out] user_name The user name -* @param[out] password The password -* @return 0 on success, otherwise negative error value. -* @retval #CONNECTION_ERROR_NONE Successful -* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter -* @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory -* @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed -*/ -int connection_profile_get_cellular_auth_info(connection_profile_h profile, connection_cellular_auth_type_e* type, char** user_name, char** password); - -/** -* @brief Gets the home URL. -* @remarks @a home_url must be released with free() by you. -* @param[in] profile The handle of profile -* @param[out] home_url The home URL -* @return 0 on success, otherwise negative error value. -* @retval #CONNECTION_ERROR_NONE Successful -* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter -* @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory -*/ -int connection_profile_get_cellular_home_url(connection_profile_h profile, char** home_url); - -/** -* @brief Gets the state of roaming. -* @param[in] profile The handle of profile -* @param[out] is_roaming Indicates whether cellular is in roaming or not -* @return 0 on success, otherwise negative error value. -* @retval #CONNECTION_ERROR_NONE Successful -* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter -*/ -int connection_profile_is_cellular_roaming(connection_profile_h profile, bool* is_roaming); - -/** -* @brief Sets the service type. -* @param[in] profile The handle of profile -* @param[out] type The type of cellular service -* @return 0 on success, otherwise negative error value. -* @retval #CONNECTION_ERROR_NONE Successful -* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter -* @see connection_update_profile() -*/ -int connection_profile_set_cellular_service_type(connection_profile_h profile, connection_cellular_service_type_e service_type); - -/** -* @brief Sets the APN(Access Point Name). -* @param[in] profile The handle of profile -* @param[out] apn The name of APN -* @return 0 on success, otherwise negative error value. -* @retval #CONNECTION_ERROR_NONE Successful -* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter -* @see connection_update_profile() -*/ -int connection_profile_set_cellular_apn(connection_profile_h profile, const char* apn); - -/** -* @brief Sets the Athentication information. -* @param[in] profile The handle of profile -* @param[out] type The type of authentication -* @param[out] user_name The user name -* @param[out] password The password -* @return 0 on success, otherwise negative error value. -* @retval #CONNECTION_ERROR_NONE Successful -* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter -* @see connection_update_profile() -*/ -int connection_profile_set_cellular_auth_info(connection_profile_h profile, connection_cellular_auth_type_e type, const char* user_name, const char* password); - -/** -* @brief Sets the home URL. -* @param[in] profile The handle of profile -* @param[out] home_url The home URL -* @return 0 on success, otherwise negative error value. -* @retval #CONNECTION_ERROR_NONE Successful -* @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter -* @see connection_update_profile() -*/ -int connection_profile_set_cellular_home_url(connection_profile_h profile, const char* home_url); - -/** -* @} -*/ - - -#ifdef __cplusplus -} - -#endif - -#endif /* __TIZEN_NETWORK_CONNECTION_PROFILE_H__ */ diff --git a/wearable/include/net_connection.h b/wearable/include/net_connection.h deleted file mode 100644 index e4f66dc..0000000 --- a/wearable/include/net_connection.h +++ /dev/null @@ -1,621 +0,0 @@ -/* - * Copyright (c) 2011-2013 Samsung Electronics Co., Ltd All Rights Reserved - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#ifndef __NET_CONNECTION_INTF_H__ -#define __NET_CONNECTION_INTF_H__ - -#include "connection_profile.h" - -#ifdef __cplusplus -extern "C" { -#endif /* __cplusplus */ - -/** - * @addtogroup CAPI_NETWORK_CONNECTION_MANAGER_MODULE - * @{ - */ - -/** - * @brief The connection handle for all connection functions. -*/ -typedef void* connection_h; - -/** - * @brief The iterator handle for profiles. -*/ -typedef void* connection_profile_iterator_h; - -/** - * @brief Enumerations of connection type. - */ -typedef enum -{ - CONNECTION_TYPE_DISCONNECTED = 0, /**< Disconnected */ - CONNECTION_TYPE_WIFI = 1, /**< Wi-Fi type */ - CONNECTION_TYPE_CELLULAR = 2, /**< Cellular type */ - CONNECTION_TYPE_ETHERNET = 3, /**< Ethernet type */ - CONNECTION_TYPE_BT = 4, /**< Bluetooth type */ -} connection_type_e; - -/** - * @brief Enumerations of cellular network state. - */ -typedef enum -{ - CONNECTION_CELLULAR_STATE_OUT_OF_SERVICE = 0, /**< Out of service */ - CONNECTION_CELLULAR_STATE_FLIGHT_MODE = 1, /**< Flight mode */ - CONNECTION_CELLULAR_STATE_ROAMING_OFF = 2, /**< Roaming is turned off */ - CONNECTION_CELLULAR_STATE_CALL_ONLY_AVAILABLE = 3, /**< Call is only available */ - CONNECTION_CELLULAR_STATE_AVAILABLE = 4, /**< Available but not connected yet */ - CONNECTION_CELLULAR_STATE_CONNECTED = 5, /**< Connected */ -} connection_cellular_state_e; - -/** - * @brief This enumeration defines the Wi-Fi state. - */ -typedef enum -{ - CONNECTION_WIFI_STATE_DEACTIVATED = 0, /**< Wi-Fi is deactivated */ - CONNECTION_WIFI_STATE_DISCONNECTED = 1, /**< Disconnected */ - CONNECTION_WIFI_STATE_CONNECTED = 2, /**< Connected */ -} connection_wifi_state_e; - -/** - * @brief This enumeration defines the ethernet state. - */ -typedef enum -{ - CONNECTION_ETHERNET_STATE_DEACTIVATED = 0, /**< There is no Ethernet profile to open */ - CONNECTION_ETHERNET_STATE_DISCONNECTED = 1, /**< Disconnected */ - CONNECTION_ETHERNET_STATE_CONNECTED = 2, /**< Connected */ -} connection_ethernet_state_e; - -/** - * @brief This enumeration defines the Bluetooth state. - */ -typedef enum -{ - CONNECTION_BT_STATE_DEACTIVATED = 0, /**< There is no Bluetooth profile to open */ - CONNECTION_BT_STATE_DISCONNECTED = 1, /**< Disconnected */ - CONNECTION_BT_STATE_CONNECTED = 2, /**< Connected */ -} connection_bt_state_e; - -/** - * @brief This enumeration defines the type of connection iterator. - */ -typedef enum -{ - CONNECTION_ITERATOR_TYPE_REGISTERED = 0, /**< The iterator of registered profile */ - CONNECTION_ITERATOR_TYPE_CONNECTED = 1, /**< The iterator of connected profile */ -} connection_iterator_type_e; - -/** - * @brief Enumerations of connection errors. - */ -typedef enum -{ - CONNECTION_ERROR_NONE = TIZEN_ERROR_NONE, /**< Successful */ - CONNECTION_ERROR_INVALID_PARAMETER = TIZEN_ERROR_INVALID_PARAMETER, /**< Invalid parameter */ - CONNECTION_ERROR_OUT_OF_MEMORY = TIZEN_ERROR_OUT_OF_MEMORY, /**< Out of memory error */ - CONNECTION_ERROR_INVALID_OPERATION = TIZEN_ERROR_INVALID_OPERATION, /**< Invalid Operation */ - CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED = TIZEN_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED, /**< Address family not supported */ - CONNECTION_ERROR_OPERATION_FAILED = TIZEN_ERROR_NETWORK_CLASS|0x0401, /**< Operation failed */ - CONNECTION_ERROR_ITERATOR_END = TIZEN_ERROR_NETWORK_CLASS|0x0402, /**< End of iteration */ - CONNECTION_ERROR_NO_CONNECTION = TIZEN_ERROR_NETWORK_CLASS|0x0403, /**< There is no connection */ - CONNECTION_ERROR_NOW_IN_PROGRESS = TIZEN_ERROR_NOW_IN_PROGRESS, /** Now in progress */ - CONNECTION_ERROR_ALREADY_EXISTS = TIZEN_ERROR_NETWORK_CLASS|0x0404, /**< Already exists */ - CONNECTION_ERROR_OPERATION_ABORTED = TIZEN_ERROR_NETWORK_CLASS|0x0405, /**< Operation is aborted */ - CONNECTION_ERROR_DHCP_FAILED = TIZEN_ERROR_NETWORK_CLASS|0x0406, /**< DHCP failed */ - CONNECTION_ERROR_INVALID_KEY = TIZEN_ERROR_NETWORK_CLASS|0x0407, /**< Invalid key */ - CONNECTION_ERROR_NO_REPLY = TIZEN_ERROR_NETWORK_CLASS|0x0408, /**< No reply */ -} connection_error_e; - -/** - * @} -*/ - -/** - * @addtogroup CAPI_NETWORK_CONNECTION_STATISTICS_MODULE - * @{ -*/ - -/** - * @brief Enumerations of statistics type. - */ -typedef enum -{ - CONNECTION_STATISTICS_TYPE_LAST_RECEIVED_DATA = 0, /**< Last received data */ - CONNECTION_STATISTICS_TYPE_LAST_SENT_DATA = 1, /**< Last sent data */ - CONNECTION_STATISTICS_TYPE_TOTAL_RECEIVED_DATA = 2, /**< Total received data */ - CONNECTION_STATISTICS_TYPE_TOTAL_SENT_DATA = 3, /**< Total sent data */ -} connection_statistics_type_e; - -/** - * @} -*/ - -/** - * @addtogroup CAPI_NETWORK_CONNECTION_MANAGER_MODULE - * @{ -*/ - - -/** - * @brief Creates a handle for managing data connections. - * @remarks @a handle must be released with connection_destroy(). - * @param[out] connection The handle of the connection - * @return 0 on success, otherwise negative error value. - * @retval #CONNECTION_ERROR_NONE Successful - * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter - * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory - * @see connection_destroy() - */ -int connection_create(connection_h* connection); - -/** - * @brief Destroys the connection handle. - * @param[in] connection The handle of the connection - * @return 0 on success, otherwise negative error value. - * @retval #CONNECTION_ERROR_NONE Successful - * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter - * @see connection_create() - */ -int connection_destroy(connection_h connection); - -/** - * @brief Called when the type of connection is changed. - * @param[in] type The type of current network connection - * @param[in] user_data The user data passed from the callback registration function - * @see connection_set_network_type_changed_cb() - * @see connection_unset_network_type_changed_cb() - */ -typedef void(*connection_type_changed_cb)(connection_type_e type, void* user_data); - -/** - * @brief Called when the address is changed. - * @param[in] ipv4_address The IP address for IPv4 - * @param[in] ipv6_address The IP address for IPv6 - * @param[in] user_data The user data passed from the callback registration function - * @see connection_set_ip_address_changed_cb() - * @see connection_unset_ip_address_changed_cb() - * @see connection_set_proxy_address_changed_cb() - * @see connection_unset_proxy_address_changed_cb() - */ -typedef void(*connection_address_changed_cb)(const char* ipv4_address, const char* ipv6_address, void* user_data); - -/** -* @brief Called after connection_set_default_cellular_service_profile_async() is completed. -* @param[in] result The result -* @param[in] user_data The user data passed from connection_open_profile() -* @pre connection_set_default_cellular_service_profile_async() will invoke this callback function. -* @see connection_set_default_cellular_service_profile_async() -*/ -typedef void(*connection_set_default_cb)(connection_error_e result, void* user_data); - -/** - * @brief Gets the type of the current profile for data connection. - * @param[in] connection The handle of the connection - * @param[out] state The state of network - * @return 0 on success, otherwise negative error value. - * @retval #CONNECTION_ERROR_NONE Successful - * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter - * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed - */ -int connection_get_type(connection_h connection, connection_type_e* type); - -/** - * @brief Gets the IP address of the current connection. - * @remarks @a ip_address must be released with free() by you. - * @param[in] connection The handle of the connection - * @param[in] address_family The address family - * @param[out] ip_address The pointer to IP address string. - * @return 0 on success, otherwise negative error value. - * @retval #CONNECTION_ERROR_NONE Successful - * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter - * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed - * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family - */ -int connection_get_ip_address(connection_h connection, connection_address_family_e address_family, char** ip_address); - -/** - * @brief Gets the proxy address of the current connection. - * @remarks @a proxy must be released with free() by you. - * @param[in] connection The handle of the connection - * @param[in] address_family The address family - * @param[out] proxy The proxy address - * @return 0 on success, otherwise negative error value. - * @retval #CONNECTION_ERROR_NONE Successful - * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter - * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed - * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED Not supported address family - */ -int connection_get_proxy(connection_h connection, connection_address_family_e address_family, char** proxy); - -/** - * @brief Gets the state of celluar connection. - * @details The returned state is for the cellular connection state. - * @param[in] connection The handle of connection - * @param[out] state The state of cellular connection - * @return 0 on success, otherwise negative error value. - * @retval #CONNECTION_ERROR_NONE Successful - * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter - * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed - */ -int connection_get_cellular_state(connection_h connection, connection_cellular_state_e* state); - -/** - * @brief Gets the state of Wi-Fi. - * @details The returned state is for the Wi-Fi connection state. - * @param[in] connection The handle of connection - * @param[out] state The state of Wi-Fi connection - * @return 0 on success, otherwise negative error value. - * @retval #CONNECTION_ERROR_NONE Successful - * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter - * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed - */ -int connection_get_wifi_state(connection_h connection, connection_wifi_state_e* state); - -/** - * @brief Gets the state of ethernet. - * @details The returned state is for the ethernet connection state. - * @param[in] connection The handle of connection - * @param[out] state The state of Ethernet connection - * @return 0 on success, otherwise negative error value. - * @retval #CONNECTION_ERROR_NONE Successful - * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter - * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed - */ -int connection_get_ethernet_state(connection_h connection, connection_ethernet_state_e* state); - -/** - * @brief Gets the state of Bluetooth. - * @details The returned state is for the Bluetooth connection state. - * @param[in] connection The handle of connection - * @param[out] state The state of Ethernet connection - * @return 0 on success, otherwise negative error value. - * @retval #CONNECTION_ERROR_NONE Successful - * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter - * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed - */ -int connection_get_bt_state(connection_h connection, connection_bt_state_e* state); - -/** - * @brief Registers the callback called when the type of current connection is changed. - * @param[in] connection The handle of connection - * @param[in] callback The callback function to be called - * @param[in] user_data The user data passed to the callback function - * @return 0 on success, otherwise negative error value. - * @retval #CONNECTION_ERROR_NONE Successful - * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter - * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed - */ -int connection_set_type_changed_cb(connection_h connection, connection_type_changed_cb callback, void* user_data); - -/** - * @brief Unregisters the callback called when the type of current connection is changed. - * @param[in] connection The handle of connection - * @return 0 on success, otherwise negative error value. - * @retval #CONNECTION_ERROR_NONE Successful - * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter - * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed - */ -int connection_unset_type_changed_cb(connection_h connection); - -/** - * @brief Registers the callback called when the IP address is changed. - * @param[in] connection The handle of connection - * @param[in] callback The callback function to be called - * @param[in] user_data The user data passed to the callback function - * @return 0 on success, otherwise negative error value. - * @retval #CONNECTION_ERROR_NONE Successful - * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter - * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed - */ -int connection_set_ip_address_changed_cb(connection_h connection, connection_address_changed_cb callback, void* user_data); - -/** - * @brief Unregisters the callback called when the IP address is changed. - * @param[in] connection The handle of connection - * @return 0 on success, otherwise negative error value. - * @retval #CONNECTION_ERROR_NONE Successful - * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter - * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed - */ -int connection_unset_ip_address_changed_cb(connection_h connection); - -/** - * @brief Registers the callback called when the proxy address is changed. - * @param[in] connection The handle of connection - * @param[in] callback The callback function to be called - * @param[in] user_data The user data passed to the callback function - * @return 0 on success, otherwise negative error value. - * @retval #CONNECTION_ERROR_NONE Successful - * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter - * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed - */ -int connection_set_proxy_address_changed_cb(connection_h connection, connection_address_changed_cb callback, void* user_data); - -/** - * @brief Unregisters the callback called when the proxy address is changed. - * @param[in] connection The handle of connection - * @return 0 on success, otherwise negative error value. - * @retval #CONNECTION_ERROR_NONE Successful - * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter - * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed - */ -int connection_unset_proxy_address_changed_cb(connection_h connection); - -/** - * @brief Adds new profile which is created by connection_profile_created(). - * @remarks You can only add a profile of cellular type. - * @param[in] connection The handle of connection - * @param[in] profile The handle of profile - * @return 0 on success, otherwise negative error value. - * @retval #CONNECTION_ERROR_NONE Successful - * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter - * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed - */ -int connection_add_profile(connection_h connection, connection_profile_h profile); - -/** - * @brief Removes existing profile. - * @param[in] connection The handle of connection - * @param[in] profile The handle of profile - * @return 0 on success, otherwise negative error value. - * @retval #CONNECTION_ERROR_NONE Successful - * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter - * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed - */ -int connection_remove_profile(connection_h connection, connection_profile_h profile); - -/** - * @brief Updates existing profile. - * @details If you change somethings of a profile, this changes will be not applied to the Connection Manager immediately. - * When you call this function, your changes affect the Connection Manager and the existing profile is updated. - * In addition, the existing profile will be updated if you call connection_open_profile(). - * @param[in] connection The handle of connection - * @param[in] profile The handle of profile - * @return 0 on success, otherwise negative error value. - * @retval #CONNECTION_ERROR_NONE Successful - * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter - * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed - * @see connection_open_profile() - */ -int connection_update_profile(connection_h connection, connection_profile_h profile); - -/** - * @brief Gets a iterator of the profiles. - * @remarks @a profile_iterator must be released with connection_destroy(). - * @param[in] connection The handle of connection - * @param[in] type The type of connetion iterator - * @param[out] profile_iterator The iterator of profile - * @return 0 on success, otherwise negative error value. - * @retval #CONNECTION_ERROR_NONE Successful - * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter - * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory - * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed - */ -int connection_get_profile_iterator(connection_h connection, connection_iterator_type_e type, connection_profile_iterator_h* profile_iterator); - -/** - * @brief Moves the profile iterator to the next position and gets a profile handle. - * @param[in] profile_iterator The iterator of profile - * @param[out] profile The handle of profile - * @return 0 on success, otherwise negative error value. - * @retval #CONNECTION_ERROR_NONE Successful - * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter - * @retval #CONNECTION_ERROR_ITERATOR_END End of iteration - */ -int connection_profile_iterator_next(connection_profile_iterator_h profile_iterator, connection_profile_h* profile); - -/** - * @brief Checks whether the next element of profile iterator exists or not. - * @param[in] profile_iterator The iterator of profile - * @return @c true if next element exists, \n @c false if next element doesn't exist - */ -bool connection_profile_iterator_has_next(connection_profile_iterator_h profile_iterator); - -/** - * @brief Destroys a iterator of the profiles. - * @param[in] profile_iterator The iterator of profile - * @return 0 on success, otherwise negative error value. - * @retval #CONNECTION_ERROR_NONE Successful - * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter - */ -int connection_destroy_profile_iterator(connection_profile_iterator_h profile_iterator); - -/** - * @brief Gets the name of default profile. - * @remarks @a profile must be released with connection_profile_destroy(). - * @param[in] connection The handle of connection - * @param[out] profile The handle of profile - * @return 0 on success, otherwise negative error value. - * @retval #CONNECTION_ERROR_NONE Successful - * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter - * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory - * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed - * @retval #CONNECTION_ERROR_NO_CONNECTION There is no connection - */ -int connection_get_current_profile(connection_h connection, connection_profile_h* profile); - -/** - * @brief Gets the default profile which provides the given cellular service. - * @remarks @a profile must be released with connection_profile_destroy(). - * @param[in] connection The handle of connection - * @param[in] type The type of cellular service. #CONNECTION_CELLULAR_SERVICE_TYPE_APPLICATION is not permitted - * @param[out] profile The handle of profile - * @return 0 on success, otherwise negative error value. - * @retval #CONNECTION_ERROR_NONE Successful - * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter - * @retval #CONNECTION_ERROR_OUT_OF_MEMORY Out of memory - * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed - */ -int connection_get_default_cellular_service_profile(connection_h connection, connection_cellular_service_type_e type, connection_profile_h* profile); - -/** - * @brief Sets the default profile which provides the given cellular service. - * @param[in] connection The handle of connection - * @param[in] type The type of cellular service. - * #CONNECTION_CELLULAR_SERVICE_TYPE_INTERNET and #CONNECTION_CELLULAR_SERVICE_TYPE_PREPAID_INTERNET are only permitted. - * @param[in] profile The handle of profile - * @return 0 on success, otherwise negative error value. - * @retval #CONNECTION_ERROR_NONE Successful - * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter - * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed - */ -int connection_set_default_cellular_service_profile(connection_h connection, connection_cellular_service_type_e type, connection_profile_h profile); - -/** - * @brief Sets the default profile which provides the given cellular service, asynchronously. - * @param[in] connection The handle of connection - * @param[in] type The type of cellular service. - * #CONNECTION_CELLULAR_SERVICE_TYPE_INTERNET and #CONNECTION_CELLULAR_SERVICE_TYPE_PREPAID_INTERNET are only permitted. - * @param[in] profile The handle of profile - * @param[in] callback The callback function to be called - * @param[in] user_data The user data passed to the callback function - * @return 0 on success, otherwise negative error value. - * @retval #CONNECTION_ERROR_NONE Successful - * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter - * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed - */ -int connection_set_default_cellular_service_profile_async(connection_h connection, - connection_cellular_service_type_e type, connection_profile_h profile, connection_set_default_cb callback, void* user_data); - -/** -* @brief Called after connection_open_profile() is completed. -* @param[in] result The result -* @param[in] user_data The user data passed from connection_open_profile() -* @pre connection_open_profile() will invoke this callback function. -* @see connection_open_profile() -*/ -typedef void(*connection_opened_cb)(connection_error_e result, void* user_data); - -/** -* @brief Called after connection_close_profile() is completed. -* @param[in] result The result -* @param[in] user_data The user data passed from connection_close_profile() -* @pre connection_close_profile() will invoke this callback function. -* @see connection_close_profile() -*/ -typedef void(*connection_closed_cb)(connection_error_e result, void* user_data); - -/** - * @brief Opens a connection of profile, asynchronously. - * @param[in] connection The handle of connection - * @param[in] profile The handle of profile - * @param[in] callback The callback function to be called - * @param[in] user_data The user data passed to the callback function - * @return 0 on success, otherwise negative error value. - * @retval #CONNECTION_ERROR_NONE Successful - * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter - * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed - * @post connection_opened_cb() will be invoked. - * @see connection_opened_cb() - * @see connection_close_profile() - * @see connection_profile_set_state_changed_cb() - * @see connection_profile_unset_state_changed_cb() - * @see connection_profile_state_changed_cb() - */ -int connection_open_profile(connection_h connection, connection_profile_h profile, connection_opened_cb callback, void* user_data); - -/** - * @brief Closes a connection of profile. - * @param[in] connection The handle of connection - * @param[in] profile The handle of profile - * @param[in] callback The callback function to be called - * @param[in] user_data The user data passed to the callback function - * @return 0 on success, otherwise negative error value. - * @retval #CONNECTION_ERROR_NONE Successful - * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter - * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed - * @post connection_closed_cb() will be invoked. - * @see connection_closed_cb() - * @see connection_open_profile() - * @see connection_profile_set_state_changed_cb() - * @see connection_profile_unset_state_changed_cb() - * @see connection_profile_state_changed_cb() - */ -int connection_close_profile(connection_h connection, connection_profile_h profile, connection_closed_cb callback, void* user_data); - -/** - * @brief Add a route to routing table. - * @details You can get the @a interface_name from connection_profile_get_network_interface_name() of opened profile. - * @param[in] connection The handle of connection - * @param[in] interface_name The name of network interface - * @param[in] host_address The IP address of the host - * @return 0 on success, otherwise negative error value. - * @retval #CONNECTION_ERROR_NONE Successful - * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter - * @retval #CONNECTION_ERROR_ALREADY_EXISTS Already exists - * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed - * @see connection_profile_get_network_interface_name() - */ -int connection_add_route(connection_h connection, const char* interface_name, const char* host_address); - -/** - * @brief Remove a route from routing table. - * @details You can get the @a interface_name from connection_profile_get_network_interface_name() of opened profile. - * @param[in] connection The handle of connection - * @param[in] interface_name The name of network interface - * @param[in] host_address The IP address of the host - * @return 0 on success, otherwise negative error value. - * @retval #CONNECTION_ERROR_NONE Successful - * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter - * @retval #CONNECTION_ERROR_ALREADY_EXISTS Already exists - * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed - * @see connection_profile_get_network_interface_name() - */ -int connection_remove_route(connection_h connection, const char* interface_name, const char* host_address); - -/** - * @} -*/ - -/** - * @addtogroup CAPI_NETWORK_CONNECTION_STATISTICS_MODULE - * @{ -*/ - -/** - * @brief Gets the statistics information. - * @param[in] connection The handle of connection - * @param[in] connection_type The type of connection. CONNECTION_TYPE_WIFI and CONNECTION_TYPE_CELLULAR are only supported. - * @param[in] statistics_type The type of statistics - * @param[out] size The received data size of the last cellular packet data connection (bytes) - * @return 0 on success, otherwise negative error value. - * @retval #CONNECTION_ERROR_NONE Successful - * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter - * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed - */ -int connection_get_statistics(connection_h connection, connection_type_e connection_type, connection_statistics_type_e statistics_type, long long* size); - -/** - * @brief Resets the statistics information - * @param[in] connection The handle of connection - * @param[in] connection_type The type of connection. CONNECTION_TYPE_WIFI and CONNECTION_TYPE_CELLULAR are only supported. - * @param[in] statistics_type The type of statistics - * @return 0 on success, otherwise negative error value. - * @retval #CONNECTION_ERROR_NONE Successful - * @retval #CONNECTION_ERROR_INVALID_PARAMETER Invalid parameter - * @retval #CONNECTION_ERROR_OPERATION_FAILED Operation failed - */ -int connection_reset_statistics(connection_h connection, connection_type_e connection_type, connection_statistics_type_e statistics_type); - -#ifdef __cplusplus -} -#endif /* __cplusplus */ - -#endif diff --git a/wearable/include/net_connection_private.h b/wearable/include/net_connection_private.h deleted file mode 100644 index 0998eed..0000000 --- a/wearable/include/net_connection_private.h +++ /dev/null @@ -1,108 +0,0 @@ -/* - * Copyright (c) 2011-2013 Samsung Electronics Co., Ltd All Rights Reserved - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#ifndef __NET_CONNECTION_PRIVATE_H__ -#define __NET_CONNECTION_PRIVATE_H__ - -#include <dlog.h> -#include <network-cm-intf.h> -#include <network-wifi-intf.h> - -#include "net_connection.h" - -#ifdef __cplusplus -extern "C" { -#endif /* __cplusplus */ - -#undef LOG_TAG -#define LOG_TAG "CAPI_NETWORK_CONNECTION" - -#define CONNECTION_INFO 1 -#define CONNECTION_ERROR 2 -#define CONNECTION_WARN 3 - -#define CONNECTION_LOG(log_level, format, args...) \ - do { \ - switch (log_level) { \ - case CONNECTION_ERROR: \ - LOGE(format, ## args); \ - break; \ - case CONNECTION_WARN: \ - LOGW(format, ## args); \ - break; \ - default: \ - LOGI(format, ## args); \ - } \ - } while(0) - -#define SECURE_CONNECTION_LOG(log_level, format, args...) \ - do { \ - switch (log_level) { \ - case CONNECTION_ERROR: \ - SECURE_LOGE(format, ## args); \ - break; \ - case CONNECTION_WARN: \ - SECURE_LOGW(format, ## args); \ - break; \ - default: \ - SECURE_LOGI(format, ## args); \ - } \ - } while(0) - -bool _connection_is_created(void); - -bool _connection_libnet_init(void); -bool _connection_libnet_deinit(void); -bool _connection_libnet_get_wifi_state(connection_wifi_state_e *state); -bool _connection_libnet_get_ethernet_state(connection_ethernet_state_e *state); -bool _connection_libnet_get_bluetooth_state(connection_bt_state_e* state); -bool _connection_libnet_check_profile_validity(connection_profile_h profile); -bool _connection_libnet_check_profile_cb_validity(connection_profile_h profile); -int _connection_libnet_get_profile_iterator(connection_iterator_type_e type, - connection_profile_iterator_h *profile_iterator); -bool _connection_libnet_iterator_has_next(connection_profile_iterator_h profile_iterator); -int _connection_libnet_get_iterator_next(connection_profile_iterator_h profile_iter_h, connection_profile_h *profile); -int _connection_libnet_destroy_iterator(connection_profile_iterator_h profile_iter_h); -int _connection_libnet_get_current_profile(connection_profile_h *profile); -int _connection_libnet_open_profile(connection_profile_h profile, connection_opened_cb callback, void *user_data); -int _connection_libnet_get_cellular_service_profile(connection_cellular_service_type_e type, connection_profile_h *profile); -int _connection_libnet_set_cellular_service_profile_sync(connection_cellular_service_type_e type, connection_profile_h profile); -int _connection_libnet_set_cellular_service_profile_async(connection_cellular_service_type_e type, - connection_profile_h profile, connection_set_default_cb callback, void* user_data); -int _connection_libnet_close_profile(connection_profile_h profile, connection_closed_cb callback, void *user_data); -int _connection_libnet_add_route(const char *interface_name, const char *host_address); -int _connection_libnet_remove_route(const char *interface_name, const char *host_address); -void _connection_libnet_add_to_profile_list(connection_profile_h profile); -void _connection_libnet_remove_from_profile_list(connection_profile_h profile); -bool _connection_libnet_add_to_profile_cb_list(connection_profile_h profile, - connection_profile_state_changed_cb callback, void *user_data); -bool _connection_libnet_remove_from_profile_cb_list(connection_profile_h profile); -int _connection_libnet_set_statistics(net_device_t device_type, net_statistics_type_e statistics_type); -int _connection_libnet_get_statistics(net_statistics_type_e statistics_type, unsigned long long *size); - -guint _connectioin_callback_add(GSourceFunc func, gpointer user_data); -void _connection_callback_cleanup(void); - -connection_cellular_service_type_e _profile_convert_to_connection_cellular_service_type(net_service_type_t svc_type); -connection_profile_state_e _profile_convert_to_cp_state(net_state_type_t state); -net_service_type_t _connection_profile_convert_to_libnet_cellular_service_type(connection_cellular_service_type_e svc_type); -net_state_type_t _connection_profile_convert_to_net_state(connection_profile_state_e state); - -#ifdef __cplusplus -} -#endif /* __cplusplus */ - -#endif |