tizen 2.3 releasetizen_2.3_releasesubmit/tizen_2.3/20150202.060802tizen_2.3

3 files changed, 0 insertions, 1501 deletions

diff --git a/wearable/include/connection_profile.h b/wearable/include/connection_profile.h
deleted file mode 100644
index 1f37c06..0000000
--- a/wearable/include/connection_profile.h
+++ /dev/null
@@ -1,772 +0,0 @@
-/*
- * Copyright (c) 2011-2013 Samsung Electronics Co., Ltd All Rights Reserved
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#ifndef __TIZEN_NETWORK_CONNECTION_PROFILE_H__
-#define __TIZEN_NETWORK_CONNECTION_PROFILE_H__
-
-#include <tizen.h>
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/**
-* @addtogroup CAPI_NETWORK_CONNECTION_WIFI_PROFILE_MODULE
-* @{
-*/
-
-/**
-* @brief Security type of Wi-Fi
-*/
-typedef enum
-{
-    CONNECTION_WIFI_SECURITY_TYPE_NONE = 0,  /**< Security disabled */
-    CONNECTION_WIFI_SECURITY_TYPE_WEP = 1,  /**< WEP */
-    CONNECTION_WIFI_SECURITY_TYPE_WPA_PSK = 2,  /**< WPA-PSK */
-    CONNECTION_WIFI_SECURITY_TYPE_WPA2_PSK = 3,  /**< WPA2-PSK */
-    CONNECTION_WIFI_SECURITY_TYPE_EAP = 4,  /**< EAP */
-} connection_wifi_security_type_e;
-
-/**
-* @brief Below encryption modes are used in infrastructure and ad-hoc mode
-*/
-typedef enum
-{
-    CONNECTION_WIFI_ENCRYPTION_TYPE_NONE = 0,  /**< Encryption disabled */
-    CONNECTION_WIFI_ENCRYPTION_TYPE_WEP = 1,  /**< WEP */
-    CONNECTION_WIFI_ENCRYPTION_TYPE_TKIP = 2,  /**< TKIP */
-    CONNECTION_WIFI_ENCRYPTION_TYPE_AES = 3,  /**< AES */
-    CONNECTION_WIFI_ENCRYPTION_TYPE_TKIP_AES_MIXED = 4,  /**< TKIP and AES are both supported */
-} connection_wifi_encryption_type_e;
-
-/**
-* @}
-*/
-
-
-/**
-* @addtogroup CAPI_NETWORK_CONNECTION_CELLULAR_PROFILE_MODULE
-* @{
-*/
-
-/**
-* @brief This enumeration defines the cellular protocol type.
-*/
-typedef enum
-{
-    CONNECTION_CELLULAR_NETWORK_TYPE_UNKNOWN = 0,  /**< Not defined */
-    CONNECTION_CELLULAR_NETWORK_TYPE_GPRS = 1,  /**< GPRS type */
-    CONNECTION_CELLULAR_NETWORK_TYPE_EDGE = 2,  /**< EDGE type */
-    CONNECTION_CELLULAR_NETWORK_TYPE_UMTS = 3,  /**< UMTS type */
-} connection_cellular_network_type_e;
-
-/**
-* @breif This enum indicates cellular service type
-*/
-typedef enum
-{
-    CONNECTION_CELLULAR_SERVICE_TYPE_UNKNOWN = 0,  /**< Unknown */
-    CONNECTION_CELLULAR_SERVICE_TYPE_INTERNET = 1,  /**< Internet */
-    CONNECTION_CELLULAR_SERVICE_TYPE_MMS = 2,  /**< MMS */
-    CONNECTION_CELLULAR_SERVICE_TYPE_PREPAID_INTERNET = 3,  /**< Prepaid internet */
-    CONNECTION_CELLULAR_SERVICE_TYPE_PREPAID_MMS = 4,  /**< Prepaid MMS */
-    CONNECTION_CELLULAR_SERVICE_TYPE_TETHERING = 5,  /**< Tethering */
-    CONNECTION_CELLULAR_SERVICE_TYPE_APPLICATION = 6,  /**< Specific application */
-} connection_cellular_service_type_e;
-
-/**
-* @brief Cellular Authentication Type
-*/
-typedef enum
-{
-    CONNECTION_CELLULAR_AUTH_TYPE_NONE = 0,  /**< No authentication */
-    CONNECTION_CELLULAR_AUTH_TYPE_PAP  = 1,  /**< PAP authentication */
-    CONNECTION_CELLULAR_AUTH_TYPE_CHAP = 2,  /**< CHAP authentication */
-} connection_cellular_auth_type_e;
-
-/**
-* @}
-*/
-
-
-/**
-* @addtogroup CAPI_NETWORK_CONNECTION_PROFILE_MODULE
-* @{
-*/
-
-/**
-* @brief The handle of profile
-*/
-typedef void* connection_profile_h;
-
-/**
-* @brief This enumeration defines the profile state type.
-*/
-typedef enum
-{
-    CONNECTION_PROFILE_STATE_DISCONNECTED = 0,  /**< Disconnected state */
-    CONNECTION_PROFILE_STATE_ASSOCIATION = 1,  /**< Association state */
-    CONNECTION_PROFILE_STATE_CONFIGURATION = 2,  /**< Configuration state */
-    CONNECTION_PROFILE_STATE_CONNECTED = 3,  /**< Connected state */
-} connection_profile_state_e;
-
-/**
-* @brief Enumerations of Address family
-*/
-typedef enum
-{
-    CONNECTION_ADDRESS_FAMILY_IPV4 = 0,  /**< IPV4 Address type */
-    CONNECTION_ADDRESS_FAMILY_IPV6 = 1,  /**< IPV6 Address type */
-} connection_address_family_e;
-
-/**
-* @brief Net IP configuration Type
-*/
-typedef enum
-{
-    CONNECTION_IP_CONFIG_TYPE_NONE = 0,  /**< Not defined */
-    CONNECTION_IP_CONFIG_TYPE_STATIC  = 1,  /**< Manual IP configuration */
-    CONNECTION_IP_CONFIG_TYPE_DYNAMIC = 2,  /**< Config IP using DHCP client*/
-    CONNECTION_IP_CONFIG_TYPE_AUTO = 3,  /**< Config IP from Auto IP pool (169.254/16). Later with DHCP client, if available */
-    CONNECTION_IP_CONFIG_TYPE_FIXED = 4,  /**< Indicates an IP address that can not be modified */
-} connection_ip_config_type_e;
-
-/**
-* @brief This enumeration defines the proxy method type.
-*/
-typedef enum
-{
-    CONNECTION_PROXY_TYPE_DIRECT = 0,  /**< Direct connection */
-    CONNECTION_PROXY_TYPE_AUTO = 1,  /**< Auto configuration(Use PAC file). If URL property is not set, DHCP/WPAD auto-discover will be tried */
-    CONNECTION_PROXY_TYPE_MANUAL  = 2,  /**< Manual configuration */
-} connection_proxy_type_e;
-
-/**
-* @enum connection_profile_type_e
-* @brief Enumerations of network connection type.
-*/
-typedef enum{
-    CONNECTION_PROFILE_TYPE_CELLULAR = 0,  /**< Cellular type */
-    CONNECTION_PROFILE_TYPE_WIFI = 1,  /**< Wi-Fi type */
-    CONNECTION_PROFILE_TYPE_ETHERNET = 2,  /**< Ethernet type */
-    CONNECTION_PROFILE_TYPE_BT = 3,  /**< Bluetooth type */
-} connection_profile_type_e;
-
-/**
-* @brief Creates the profile handle.
-* @details The profile name, which is got from connection_profile_get_name(), will include the keyword you set.
-* @remarks  @a profile must be released with connection_profile_destroy().
-* @param[in] type  The type of profile. #CONNECTION_PROFILE_TYPE_CELLULAR is only supported.
-* @param[in] keyword  The keyword included in profile name
-* @param[out] profile  The handle of the profile
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE  Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER  Invalid parameter
-* @retval #CONNECTION_ERROR_OUT_OF_MEMORY  Out of memory
-* @see connection_profile_destroy()
-* @see connection_profile_get_name()
-*/
-int connection_profile_create(connection_profile_type_e type, const char* keyword, connection_profile_h* profile);
-
-/**
-* @brief Destroys the profile handle.
-* @param[out] connection  The handle to the connection
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE  Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER  Invalid parameter
-* @see connection_profile_create()
-*/
-int connection_profile_destroy(connection_profile_h profile);
-
-/**
-* @brief Clons the profile handle.
-* @remarks @a cloned_profile must be released with connection_profile_destroy().
-* @param[in] origin_profile  The handle of origin profile
-* @param[out] cloned_profile  The handle of cloned profile
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE  Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER  Invalid parameter
-* @retval #CONNECTION_ERROR_OUT_OF_MEMORY  Out of memory
-* @see connection_profile_destroy()
-*/
-int connection_profile_clone(connection_profile_h* cloned_profile, connection_profile_h origin_profile);
-
-/**
-* @brief Gets the profile ID.
-* @details The separate profiles can have the same name.
-* So, you must use this API instead of connection_profile_get_name() if you want to get the unique identification.
-* In case that you create a profile, this value will be determined when you add the profile.
-* @remarks @a profile_id must be released with free() by you.
-* @param[in] profile  The handle of profile
-* @param[out] profile_id  The ID of profile
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE  Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER  Invalid parameter
-* @retval #CONNECTION_ERROR_OUT_OF_MEMORY  Out of memory
-* @see connection_profile_get_name()
-* @see connection_add_profile()
-*/
-int connection_profile_get_id(connection_profile_h profile, char** profile_id);
-
-/**
-* @brief Gets the profile name.
-* @remarks @a profile_name must be released with free() by you.
-* @param[in] profile  The handle of profile
-* @param[out] profile_name  The name of profile
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE  Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER  Invalid parameter
-* @retval #CONNECTION_ERROR_OUT_OF_MEMORY  Out of memory
-* @see connection_profile_get_id()
-*/
-int connection_profile_get_name(connection_profile_h profile, char** profile_name);
-
-/**
-* @brief Gets the network type.
-* @param[in] profile  The handle of profile
-* @param[out] type  The type of profile
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE  Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER  Invalid parameter
-* @retval #CONNECTION_ERROR_OPERATION_FAILED  Operation failed
-*/
-int connection_profile_get_type(connection_profile_h profile, connection_profile_type_e* type);
-
-/**
-* @brief Gets the name of network interface. For example, eth0 and pdp0.
-* @remarks @a interface_name must be released with free() by you.
-* @param[in] profile  The handle of profile
-* @param[out] interface_name  The name of network interface
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE  Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER  Invalid parameter
-* @retval #CONNECTION_ERROR_OUT_OF_MEMORY  Out of memory
-*/
-int connection_profile_get_network_interface_name(connection_profile_h profile, char** interface_name);
-
-/**
-* @brief Refresh the profile information.
-* @remarks You should call this function in order to get the current information because the profile information can be changed.
-* @param[in] profile  The handle of profile
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE  Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER  Invalid parameter
-* @retval #CONNECTION_ERROR_OPERATION_FAILED  Operation failed
-* @retval #CONNECTION_ERROR_OUT_OF_MEMORY  Out of memory
-*/
-int connection_profile_refresh(connection_profile_h profile);
-
-/**
-* @brief Gets the network type.
-* @param[in] profile  The handle of profile
-* @param[out] state  The state of profile
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE  Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER  Invalid parameter
-* @retval #CONNECTION_ERROR_OPERATION_FAILED  Operation failed
-*/
-int connection_profile_get_state(connection_profile_h profile, connection_profile_state_e* state);
-
-/**
-* @brief Gets the IP config type.
-* @param[in] profile  The handle of profile
-* @param[in] address_family  The address family
-* @param[out] type  The type of IP config
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE  Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER  Invalid parameter
-* @retval #CONNECTION_ERROR_OPERATION_FAILED  Operation failed
-*/
-int connection_profile_get_ip_config_type(connection_profile_h profile, connection_address_family_e address_family, connection_ip_config_type_e* type);
-
-/**
-* @brief Gets the IP address.
-* @remarks @a ip_address must be released with free() by you.
-* @param[in] profile  The handle of profile
-* @param[in] address_family  The address family
-* @param[out] ip_address  The IP address
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE  Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER  Invalid parameter
-* @retval #CONNECTION_ERROR_OUT_OF_MEMORY  Out of memory
-* @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED  Not supported address family
-* @retval #CONNECTION_ERROR_OPERATION_FAILED  Operation failed
-*/
-int connection_profile_get_ip_address(connection_profile_h profile, connection_address_family_e address_family, char** ip_address);
-
-/**
-* @brief Gets the Subnet Mask.
-* @remarks @a subnet_mask must be released with free() by you.
-* @param[in] profile  The handle of profile
-* @param[in] address_family  The address family
-* @param[out] subnet_mask  The subnet mask
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE  Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER  Invalid parameter
-* @retval #CONNECTION_ERROR_OUT_OF_MEMORY  Out of memory
-* @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED  Not supported address family
-* @retval #CONNECTION_ERROR_OPERATION_FAILED  Operation failed
-*/
-int connection_profile_get_subnet_mask(connection_profile_h profile, connection_address_family_e address_family, char** subnet_mask);
-
-/**
-* @brief Gets the Gateway address.
-* @remarks @a gateway_address must be released with free() by you.
-* @param[in] profile  The handle of profile
-* @param[in] address_family  The address family
-* @param[out] gateway_address  The gateway address
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE  Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER  Invalid parameter
-* @retval #CONNECTION_ERROR_OUT_OF_MEMORY  Out of memory
-* @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED  Not supported address family
-* @retval #CONNECTION_ERROR_OPERATION_FAILED  Operation failed
-*/
-int connection_profile_get_gateway_address(connection_profile_h profile, connection_address_family_e address_family, char** gateway_address);
-
-/**
-* @brief Gets the DNS address.
-* @remarks The allowance of DNS address is 2. @a dns_address must be released with free() by you.
-* @param[in] profile  The handle of profile
-* @param[in] order  The order of DNS address. It starts from 1, which means first DNS address.
-* @param[in] address_family  The address family
-* @param[out] dns_address  The DNS address
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE  Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER  Invalid parameter
-* @retval #CONNECTION_ERROR_OUT_OF_MEMORY  Out of memory
-* @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED  Not supported address family
-* @retval #CONNECTION_ERROR_OPERATION_FAILED  Operation failed
-*/
-int connection_profile_get_dns_address(connection_profile_h profile, int order, connection_address_family_e address_family, char** dns_address);
-
-/**
-* @brief Gets the Proxy type.
-* @param[in] profile  The handle of profile
-* @param[out] type  The type of proxy
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE  Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER  Invalid parameter
-* @retval #CONNECTION_ERROR_OPERATION_FAILED  Operation failed
-*/
-int connection_profile_get_proxy_type(connection_profile_h profile, connection_proxy_type_e* type);
-
-/**
-* @brief Gets the Proxy address.
-* @remarks @a proxy_address must be released with free() by you.
-* @param[in] profile  The handle of profile
-* @param[in] address_family  The address family
-* @param[out] proxy_address  The proxy address
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE  Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER  Invalid parameter
-* @retval #CONNECTION_ERROR_OUT_OF_MEMORY  Out of memory
-* @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED  Not supported address family
-* @retval #CONNECTION_ERROR_OPERATION_FAILED  Operation failed
-*/
-int connection_profile_get_proxy_address(connection_profile_h profile, connection_address_family_e address_family, char** proxy_address);
-
-/**
-* @brief Sets the IP config type.
-* @details If you set IP config type to #WIFI_IP_CONFIG_TYPE_STATIC,
-* then IP address, Gateway and Subnet mask will be set to the initial value "0.0.0.0".
-* @param[in] profile  The handle of profile
-* @param[in] address_family  The address family
-* @param[in] type  The type of IP config
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE  Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER  Invalid parameter
-* @retval #CONNECTION_ERROR_OPERATION_FAILED  Operation failed
-*/
-int connection_profile_set_ip_config_type(connection_profile_h profile, connection_address_family_e address_family, connection_ip_config_type_e type);
-
-/**
-* @brief Sets the IP address.
-* @param[in] profile  The handle of profile
-* @param[in] address_family  The address family
-* @param[in] ip_address  The IP address. If you set this value to NULL, then the existing value will be deleted.
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE  Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER  Invalid parameter
-* @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED  Not supported address family
-* @retval #CONNECTION_ERROR_OPERATION_FAILED  Operation failed
-* @see connection_update_profile()
-*/
-int connection_profile_set_ip_address(connection_profile_h profile, connection_address_family_e address_family, const char* ip_address);
-
-/**
-* @brief Sets the Subnet Mask.
-* @param[in] profile  The handle of profile
-* @param[in] address_family  The address family
-* @param[in] subnet_mask  The subnet mask. If you set this value to NULL, then the existing value will be deleted.
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE  Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER  Invalid parameter
-* @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED  Not supported address family
-* @retval #CONNECTION_ERROR_OPERATION_FAILED  Operation failed
-* @see connection_update_profile()
-*/
-int connection_profile_set_subnet_mask(connection_profile_h profile, connection_address_family_e address_family, const char* subnet_mask);
-
-/**
-* @brief Sets the Gateway address.
-* @param[in] profile  The handle of profile
-* @param[in] address_family  The address family
-* @param[in] gateway_address  The gateway address. If you set this value to NULL, then the existing value will be deleted.
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE  Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER  Invalid parameter
-* @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED  Not supported address family
-* @retval #CONNECTION_ERROR_OPERATION_FAILED  Operation failed
-* @see connection_update_profile()
-*/
-int connection_profile_set_gateway_address(connection_profile_h profile, connection_address_family_e address_family, const char* gateway_address);
-
-/**
-* @brief Sets the DNS address.
-* @remarks The allowance of DNS address is 2.
-* @param[in] profile  The handle of profile
-* @param[in] order  The order of DNS address. It starts from 1, which means first DNS address.
-* @param[in] address_family  The address family
-* @param[in] dns_address  The DNS address. If you set this value to NULL, then the existing value will be deleted.
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE  Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER  Invalid parameter
-* @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED  Not supported address family
-* @retval #CONNECTION_ERROR_OPERATION_FAILED  Operation failed
-* @see connection_update_profile()
-*/
-int connection_profile_set_dns_address(connection_profile_h profile, int order, connection_address_family_e address_family, const char* dns_address);
-
-/**
-* @brief Sets the Proxy type.
-* @details If you set Proxy type to #WIFI_PROXY_TYPE_AUTO or #WIFI_PROXY_TYPE_MANUAL, then Proxy will be restored.
-* @param[in] profile  The handle of profile
-* @param[in] type  The type of proxy
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE  Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER  Invalid parameter
-* @retval #CONNECTION_ERROR_OPERATION_FAILED  Operation failed
-* @see connection_update_profile()
-*/
-int connection_profile_set_proxy_type(connection_profile_h profile, connection_proxy_type_e type);
-
-/**
-* @brief Sets the Proxy address.
-* @param[in] profile  The handle of profile
-* @param[in] address_family  The address family
-* @param[in] proxy_address  The proxy address. If you set this value to NULL, then the existing value will be deleted.
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE  Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER  Invalid parameter
-* @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED  Not supported address family
-* @retval #CONNECTION_ERROR_OPERATION_FAILED  Operation failed
-* @see connection_update_profile()
-*/
-int connection_profile_set_proxy_address(connection_profile_h profile, connection_address_family_e address_family, const char* proxy_address);
-
-/**
-* @brief Called when the state of profile is changed.
-* @param[in] state  The state
-* @param[in] user_data The user data passed from the callback registration function
-* @see connection_profile_set_state_changed_cb()
-* @see connection_profile_unset_state_changed_cb()
-*/
-typedef void(*connection_profile_state_changed_cb)(connection_profile_state_e state, void* user_data);
-
-/**
-* @brief Registers the callback called when the state of profile is changed.
-* @param[in] profile  The handle of profile
-* @param[in] callback  The callback function to be called
-* @param[in] user_data The user data passed to the callback function
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE  Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER   Invalid parameter
-* @retval #CONNECTION_ERROR_OPERATION_FAILED  Operation failed
-* @post connection_opened_cb() is invoked when the state of profile is changed.
-* @see connection_profile_state_changed_cb()
-* @see connection_profile_unset_state_changed_cb()
-*/
-int connection_profile_set_state_changed_cb(connection_profile_h profile, connection_profile_state_changed_cb callback, void* user_data);
-
-/**
-* @brief Unregisters the callback called when the state of profile is changed.
-* @param[in] profile  The handle of profile
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE  Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER   Invalid parameter
-* @see connection_profile_state_changed_cb()
-* @see connection_profile_set_state_changed_cb()
-*/
-int connection_profile_unset_state_changed_cb(connection_profile_h profile);
-
-/**
-* @}
-*/
-
-
-/**
-* @addtogroup CAPI_NETWORK_CONNECTION_WIFI_PROFILE_MODULE
-* @{
-*/
-
-/**
-* @brief Gets the ESSID(Extended Service Set Identifier).
-* @remarks @a essid must be released with free() by you.
-* @param[in] profile  The handle of profile
-* @param[out] essid  The ESSID
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE  Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER  Invalid parameter
-* @retval #CONNECTION_ERROR_OUT_OF_MEMORY  Out of memory
-*/
-int connection_profile_get_wifi_essid(connection_profile_h profile, char** essid);
-
-/**
-* @brief Gets the BSSID(Basic Service Set Identifier).
-* @remarks @a bssid must be released with free() by you.
-* @param[in] profile  The handle of profile
-* @param[out] bssid  The BSSID
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE  Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER  Invalid parameter
-* @retval #CONNECTION_ERROR_OUT_OF_MEMORY  Out of memory
-*/
-int connection_profile_get_wifi_bssid(connection_profile_h profile, char** bssid);
-
-/**
-* @brief Gets the RSSI.
-* @param[in] profile  The handle of profile
-* @param[out] rssi  The RSSI
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE  Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER  Invalid parameter
-*/
-int connection_profile_get_wifi_rssi(connection_profile_h profile, int* rssi);
-
-/**
-* @brief Gets the frequency (MHz).
-* @param[in] profile  The handle of profile
-* @param[out] frequency  The frequency
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE  Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER  Invalid parameter
-*/
-int connection_profile_get_wifi_frequency(connection_profile_h profile, int* frequency);
-
-/**
-* @brief Gets the max speed (Mbps).
-* @param[in] profile  The handle of profile
-* @param[out] max_speed  The max speed
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE  Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER  Invalid parameter
-*/
-int connection_profile_get_wifi_max_speed(connection_profile_h profile, int* max_speed);
-
-/**
-* @brief Gets the security mode of Wi-Fi.
-* @param[in] profile  The handle of profile
-* @param[out] type  The type of Wi-Fi security
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE  Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER  Invalid parameter
-* @retval #CONNECTION_ERROR_OPERATION_FAILED  Operation failed
-*/
-int connection_profile_get_wifi_security_type(connection_profile_h profile, connection_wifi_security_type_e* type);
-
-/**
-* @brief Gets the security mode of Wi-Fi.
-* @param[in] profile  The handle of profile
-* @param[out] type  The type of Wi-Fi security
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE  Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER  Invalid parameter
-* @retval #CONNECTION_ERROR_OPERATION_FAILED  Operation failed
-*/
-int connection_profile_get_wifi_encryption_type(connection_profile_h profile, connection_wifi_encryption_type_e* type);
-
-/**
-* @brief Checks whether passphrase is required.
-* @remarks This function is not valid if security type is #WIFI_SECURITY_TYPE_EAP.
-* @param[in] profile  The handle of profile
-* @param[out] required  Indicates whether passphrase is required or not
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE  Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER  Invalid parameter
-*/
-int connection_profile_is_wifi_passphrase_required(connection_profile_h profile, bool* required);
-
-/**
-* @brief Sets the passphrase of Wi-Fi WPA.
-* @param[in] profile  The handle of profile
-* @param[in] passphrase  The passphrase of Wi-Fi security
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE  Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER  Invalid parameter
-* @see connection_update_profile()
-*/
-int connection_profile_set_wifi_passphrase(connection_profile_h profile, const char* passphrase);
-
-/**
-* @brief Checks whether WPS(Wi-Fi Protected Setup) is supported.
-* @remarks If WPS is supported, you can connect access point with WPS by wifi_connect_with_wps().
-* @param[in] profile  The handle of profile
-* @param[out] supported  Indicates whether WPS is supported or not
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE  Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER  Invalid parameter
-*/
-int connection_profile_is_wifi_wps_supported(connection_profile_h profile, bool* supported);
-
-/**
-* @}
-*/
-
-
-/**
-* @addtogroup CAPI_NETWORK_CONNECTION_CELLULAR_PROFILE_MODULE
-* @{
-*/
-
-/**
-* @brief Gets the cellular network type.
-* @param[in] profile  The handle of profile
-* @param[out] type  The type of cellular
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE  Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER  Invalid parameter
-* @retval #CONNECTION_ERROR_OPERATION_FAILED  Operation failed
-*/
-int connection_profile_get_cellular_network_type(connection_profile_h profile, connection_cellular_network_type_e* type);
-
-/**
-* @brief Gets the service type.
-* @param[in] profile  The handle of profile
-* @param[out] type  The type of cellular service
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE  Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER  Invalid parameter
-* @retval #CONNECTION_ERROR_OPERATION_FAILED  Operation failed
-*/
-int connection_profile_get_cellular_service_type(connection_profile_h profile, connection_cellular_service_type_e* type);
-
-/**
-* @brief Gets the APN(access point name).
-* @remarks @a apn must be released with free() by you.
-* @param[in] profile  The handle of profile
-* @param[out] apn  The name of APN
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE  Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER  Invalid parameter
-* @retval #CONNECTION_ERROR_OUT_OF_MEMORY  Out of memory
-*/
-int connection_profile_get_cellular_apn(connection_profile_h profile, char** apn);
-
-/**
-* @brief Gets the authentication information.
-* @remarks @a user_name and @a password must be released with free() by you.
-* @param[in] profile  The handle of profile
-* @param[out] type  The type of authentication
-* @param[out] user_name  The user name
-* @param[out] password  The password
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE  Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER  Invalid parameter
-* @retval #CONNECTION_ERROR_OUT_OF_MEMORY  Out of memory
-* @retval #CONNECTION_ERROR_OPERATION_FAILED  Operation failed
-*/
-int connection_profile_get_cellular_auth_info(connection_profile_h profile, connection_cellular_auth_type_e* type, char** user_name, char** password);
-
-/**
-* @brief Gets the home URL.
-* @remarks @a home_url must be released with free() by you.
-* @param[in] profile  The handle of profile
-* @param[out] home_url  The home URL
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE  Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER  Invalid parameter
-* @retval #CONNECTION_ERROR_OUT_OF_MEMORY  Out of memory
-*/
-int connection_profile_get_cellular_home_url(connection_profile_h profile, char** home_url);
-
-/**
-* @brief Gets the state of roaming.
-* @param[in] profile  The handle of profile
-* @param[out] is_roaming  Indicates whether cellular is in roaming or not
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE  Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER  Invalid parameter
-*/
-int connection_profile_is_cellular_roaming(connection_profile_h profile, bool* is_roaming);
-
-/**
-* @brief Sets the service type.
-* @param[in] profile  The handle of profile
-* @param[out] type  The type of cellular service
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE  Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER  Invalid parameter
-* @see connection_update_profile()
-*/
-int connection_profile_set_cellular_service_type(connection_profile_h profile, connection_cellular_service_type_e service_type);
-
-/**
-* @brief Sets the APN(Access Point Name).
-* @param[in] profile  The handle of profile
-* @param[out] apn  The name of APN
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE  Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER  Invalid parameter
-* @see connection_update_profile()
-*/
-int connection_profile_set_cellular_apn(connection_profile_h profile, const char* apn);
-
-/**
-* @brief Sets the Athentication information.
-* @param[in] profile  The handle of profile
-* @param[out] type  The type of authentication
-* @param[out] user_name  The user name
-* @param[out] password  The password
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE  Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER  Invalid parameter
-* @see connection_update_profile()
-*/
-int connection_profile_set_cellular_auth_info(connection_profile_h profile, connection_cellular_auth_type_e type, const char* user_name, const char* password);
-
-/**
-* @brief Sets the home URL.
-* @param[in] profile  The handle of profile
-* @param[out] home_url  The home URL
-* @return 0 on success, otherwise negative error value.
-* @retval #CONNECTION_ERROR_NONE  Successful
-* @retval #CONNECTION_ERROR_INVALID_PARAMETER  Invalid parameter
-* @see connection_update_profile()
-*/
-int connection_profile_set_cellular_home_url(connection_profile_h profile, const char* home_url);
-
-/**
-* @}
-*/
-
-
-#ifdef __cplusplus
-}
-
-#endif
-
-#endif /* __TIZEN_NETWORK_CONNECTION_PROFILE_H__ */
diff --git a/wearable/include/net_connection.h b/wearable/include/net_connection.h
deleted file mode 100644
index e4f66dc..0000000
--- a/wearable/include/net_connection.h
+++ /dev/null
@@ -1,621 +0,0 @@
-/*
- * Copyright (c) 2011-2013 Samsung Electronics Co., Ltd All Rights Reserved
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#ifndef __NET_CONNECTION_INTF_H__
-#define __NET_CONNECTION_INTF_H__
-
-#include "connection_profile.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif /* __cplusplus */
-
-/**
- * @addtogroup CAPI_NETWORK_CONNECTION_MANAGER_MODULE
- * @{
- */
-
-/**
- * @brief  The connection handle for all connection functions.
-*/
-typedef void* connection_h;
-
-/**
- * @brief  The iterator handle for profiles.
-*/
-typedef void* connection_profile_iterator_h;
-
-/**
- * @brief Enumerations of connection type.
- */
-typedef enum
-{
-    CONNECTION_TYPE_DISCONNECTED = 0,  /**< Disconnected */
-    CONNECTION_TYPE_WIFI = 1,  /**< Wi-Fi type */
-    CONNECTION_TYPE_CELLULAR = 2,  /**< Cellular type */
-    CONNECTION_TYPE_ETHERNET = 3,  /**< Ethernet type */
-    CONNECTION_TYPE_BT = 4,  /**< Bluetooth type */
-} connection_type_e;
-
-/**
- * @brief Enumerations of cellular network state.
- */
-typedef enum
-{
-    CONNECTION_CELLULAR_STATE_OUT_OF_SERVICE = 0,  /**< Out of service */
-    CONNECTION_CELLULAR_STATE_FLIGHT_MODE = 1,  /**< Flight mode */
-    CONNECTION_CELLULAR_STATE_ROAMING_OFF = 2,  /**< Roaming is turned off */
-    CONNECTION_CELLULAR_STATE_CALL_ONLY_AVAILABLE = 3,  /**< Call is only available */
-    CONNECTION_CELLULAR_STATE_AVAILABLE = 4,  /**< Available but not connected yet */
-    CONNECTION_CELLULAR_STATE_CONNECTED = 5,  /**< Connected */
-} connection_cellular_state_e;
-
-/**
- * @brief This enumeration defines the Wi-Fi state.
- */
-typedef enum
-{
-    CONNECTION_WIFI_STATE_DEACTIVATED = 0,  /**< Wi-Fi is deactivated */
-    CONNECTION_WIFI_STATE_DISCONNECTED = 1,  /**< Disconnected */
-    CONNECTION_WIFI_STATE_CONNECTED = 2,  /**< Connected */
-} connection_wifi_state_e;
-
-/**
- * @brief This enumeration defines the ethernet state.
- */
-typedef enum
-{
-    CONNECTION_ETHERNET_STATE_DEACTIVATED = 0,  /**< There is no Ethernet profile to open */
-    CONNECTION_ETHERNET_STATE_DISCONNECTED = 1,  /**< Disconnected */
-    CONNECTION_ETHERNET_STATE_CONNECTED = 2,  /**< Connected */
-} connection_ethernet_state_e;
-
-/**
- * @brief This enumeration defines the Bluetooth state.
- */
-typedef enum
-{
-    CONNECTION_BT_STATE_DEACTIVATED = 0,  /**< There is no Bluetooth profile to open */
-    CONNECTION_BT_STATE_DISCONNECTED = 1,  /**< Disconnected */
-    CONNECTION_BT_STATE_CONNECTED = 2,  /**< Connected */
-} connection_bt_state_e;
-
-/**
- * @brief This enumeration defines the type of connection iterator.
- */
-typedef enum
-{
-    CONNECTION_ITERATOR_TYPE_REGISTERED = 0,  /**< The iterator of registered profile  */
-    CONNECTION_ITERATOR_TYPE_CONNECTED = 1,  /**< The iterator of connected profile  */
-} connection_iterator_type_e;
-
-/**
- * @brief Enumerations of connection errors.
- */
-typedef enum
-{
-    CONNECTION_ERROR_NONE = TIZEN_ERROR_NONE, /**< Successful */
-    CONNECTION_ERROR_INVALID_PARAMETER = TIZEN_ERROR_INVALID_PARAMETER, /**< Invalid parameter */
-    CONNECTION_ERROR_OUT_OF_MEMORY = TIZEN_ERROR_OUT_OF_MEMORY, /**< Out of memory error */
-    CONNECTION_ERROR_INVALID_OPERATION = TIZEN_ERROR_INVALID_OPERATION, /**< Invalid Operation */
-    CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED = TIZEN_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED, /**< Address family not supported */
-    CONNECTION_ERROR_OPERATION_FAILED = TIZEN_ERROR_NETWORK_CLASS|0x0401, /**< Operation failed */
-    CONNECTION_ERROR_ITERATOR_END = TIZEN_ERROR_NETWORK_CLASS|0x0402, /**< End of iteration */
-    CONNECTION_ERROR_NO_CONNECTION = TIZEN_ERROR_NETWORK_CLASS|0x0403, /**< There is no connection */
-    CONNECTION_ERROR_NOW_IN_PROGRESS = TIZEN_ERROR_NOW_IN_PROGRESS, /** Now in progress */
-    CONNECTION_ERROR_ALREADY_EXISTS = TIZEN_ERROR_NETWORK_CLASS|0x0404, /**< Already exists */
-    CONNECTION_ERROR_OPERATION_ABORTED = TIZEN_ERROR_NETWORK_CLASS|0x0405, /**< Operation is aborted */
-    CONNECTION_ERROR_DHCP_FAILED = TIZEN_ERROR_NETWORK_CLASS|0x0406, /**< DHCP failed  */
-    CONNECTION_ERROR_INVALID_KEY = TIZEN_ERROR_NETWORK_CLASS|0x0407, /**< Invalid key  */
-    CONNECTION_ERROR_NO_REPLY = TIZEN_ERROR_NETWORK_CLASS|0x0408, /**< No reply */
-} connection_error_e;
-
-/**
- * @}
-*/
-
-/**
- * @addtogroup CAPI_NETWORK_CONNECTION_STATISTICS_MODULE
- * @{
-*/
-
-/**
- * @brief Enumerations of statistics type.
- */
-typedef enum
-{
-    CONNECTION_STATISTICS_TYPE_LAST_RECEIVED_DATA = 0,  /**< Last received data */
-    CONNECTION_STATISTICS_TYPE_LAST_SENT_DATA = 1,  /**< Last sent data */
-    CONNECTION_STATISTICS_TYPE_TOTAL_RECEIVED_DATA = 2,  /**< Total received data */
-    CONNECTION_STATISTICS_TYPE_TOTAL_SENT_DATA = 3,  /**< Total sent data */
-} connection_statistics_type_e;
-
-/**
- * @}
-*/
-
-/**
- * @addtogroup CAPI_NETWORK_CONNECTION_MANAGER_MODULE
- * @{
-*/
-
-
-/**
- * @brief Creates a handle for managing data connections.
- * @remarks @a handle must be released with connection_destroy().
- * @param[out] connection  The handle of the connection
- * @return 0 on success, otherwise negative error value.
- * @retval #CONNECTION_ERROR_NONE  Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER  Invalid parameter
- * @retval #CONNECTION_ERROR_OUT_OF_MEMORY  Out of memory
- * @see connection_destroy()
- */
-int connection_create(connection_h* connection);
-
-/**
- * @brief Destroys the connection handle.
- * @param[in] connection  The handle of the connection
- * @return 0 on success, otherwise negative error value.
- * @retval #CONNECTION_ERROR_NONE  Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER  Invalid parameter
- * @see connection_create()
- */
-int connection_destroy(connection_h connection);
-
-/**
- * @brief Called when the type of connection is changed.
- * @param[in] type  The type of current network connection
- * @param[in] user_data The user data passed from the callback registration function
- * @see connection_set_network_type_changed_cb()
- * @see connection_unset_network_type_changed_cb()
- */
-typedef void(*connection_type_changed_cb)(connection_type_e type, void* user_data);
-
-/**
- * @brief Called when the address is changed.
- * @param[in] ipv4_address  The IP address for IPv4
- * @param[in] ipv6_address  The IP address for IPv6
- * @param[in] user_data The user data passed from the callback registration function
- * @see connection_set_ip_address_changed_cb()
- * @see connection_unset_ip_address_changed_cb()
- * @see connection_set_proxy_address_changed_cb()
- * @see connection_unset_proxy_address_changed_cb()
- */
-typedef void(*connection_address_changed_cb)(const char* ipv4_address, const char* ipv6_address, void* user_data);
-
-/**
-* @brief Called after connection_set_default_cellular_service_profile_async() is completed.
-* @param[in] result  The result
-* @param[in] user_data The user data passed from connection_open_profile()
-* @pre connection_set_default_cellular_service_profile_async() will invoke this callback function.
-* @see connection_set_default_cellular_service_profile_async()
-*/
-typedef void(*connection_set_default_cb)(connection_error_e result, void* user_data);
-
-/**
- * @brief Gets the type of the current profile for data connection.
- * @param[in] connection  The handle of the connection
- * @param[out] state  The state of network
- * @return 0 on success, otherwise negative error value.
- * @retval #CONNECTION_ERROR_NONE  Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER  Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED  Operation failed
- */
-int connection_get_type(connection_h connection, connection_type_e* type);
-
-/**
- * @brief Gets the IP address of the current connection.
- * @remarks @a ip_address must be released with free() by you.
- * @param[in] connection  The handle of the connection
- * @param[in] address_family  The address family
- * @param[out] ip_address  The pointer to IP address string.
- * @return 0 on success, otherwise negative error value.
- * @retval #CONNECTION_ERROR_NONE  Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER   Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED  Operation failed
- * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED  Not supported address family
- */
-int connection_get_ip_address(connection_h connection, connection_address_family_e address_family, char** ip_address);
-
-/**
- * @brief Gets the proxy address of the current connection.
- * @remarks @a proxy must be released with free() by you.
- * @param[in] connection  The handle of the connection
- * @param[in] address_family  The address family
- * @param[out] proxy  The proxy address
- * @return 0 on success, otherwise negative error value.
- * @retval #CONNECTION_ERROR_NONE  Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER   Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED  Operation failed
- * @retval #CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTED  Not supported address family
- */
-int connection_get_proxy(connection_h connection, connection_address_family_e address_family, char** proxy);
-
-/**
- * @brief  Gets the state of celluar connection.
- * @details The returned state is for the cellular connection state.
- * @param[in] connection  The handle of connection
- * @param[out] state  The state of cellular connection
- * @return 0 on success, otherwise negative error value.
- * @retval #CONNECTION_ERROR_NONE  Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER   Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED  Operation failed
- */
-int connection_get_cellular_state(connection_h connection, connection_cellular_state_e* state);
-
-/**
- * @brief  Gets the state of Wi-Fi.
- * @details The returned state is for the Wi-Fi connection state.
- * @param[in] connection  The handle of connection
- * @param[out] state  The state of Wi-Fi connection
- * @return 0 on success, otherwise negative error value.
- * @retval #CONNECTION_ERROR_NONE  Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER   Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED  Operation failed
- */
-int connection_get_wifi_state(connection_h connection, connection_wifi_state_e* state);
-
-/**
- * @brief  Gets the state of ethernet.
- * @details The returned state is for the ethernet connection state.
- * @param[in] connection  The handle of connection
- * @param[out] state  The state of Ethernet connection
- * @return 0 on success, otherwise negative error value.
- * @retval #CONNECTION_ERROR_NONE  Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER   Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED  Operation failed
- */
-int connection_get_ethernet_state(connection_h connection, connection_ethernet_state_e* state);
-
-/**
- * @brief  Gets the state of Bluetooth.
- * @details The returned state is for the Bluetooth connection state.
- * @param[in] connection  The handle of connection
- * @param[out] state  The state of Ethernet connection
- * @return 0 on success, otherwise negative error value.
- * @retval #CONNECTION_ERROR_NONE  Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER   Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED  Operation failed
- */
-int connection_get_bt_state(connection_h connection, connection_bt_state_e* state);
-
-/**
- * @brief Registers the callback called when the type of current connection is changed.
- * @param[in] connection  The handle of connection
- * @param[in] callback  The callback function to be called
- * @param[in] user_data The user data passed to the callback function
- * @return 0 on success, otherwise negative error value.
- * @retval #CONNECTION_ERROR_NONE  Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER   Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED  Operation failed
- */
-int connection_set_type_changed_cb(connection_h connection, connection_type_changed_cb callback, void* user_data);
-
-/**
- * @brief Unregisters the callback called when the type of current connection is changed.
- * @param[in] connection  The handle of connection
- * @return 0 on success, otherwise negative error value.
- * @retval #CONNECTION_ERROR_NONE  Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER   Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED  Operation failed
- */
-int connection_unset_type_changed_cb(connection_h connection);
-
-/**
- * @brief Registers the callback called when the IP address is changed.
- * @param[in] connection  The handle of connection
- * @param[in] callback  The callback function to be called
- * @param[in] user_data The user data passed to the callback function
- * @return 0 on success, otherwise negative error value.
- * @retval #CONNECTION_ERROR_NONE  Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER   Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED  Operation failed
- */
-int connection_set_ip_address_changed_cb(connection_h connection, connection_address_changed_cb callback, void* user_data);
-
-/**
- * @brief Unregisters the callback called when the IP address is changed.
- * @param[in] connection  The handle of connection
- * @return 0 on success, otherwise negative error value.
- * @retval #CONNECTION_ERROR_NONE  Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER   Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED  Operation failed
- */
-int connection_unset_ip_address_changed_cb(connection_h connection);
-
-/**
- * @brief Registers the callback called when the proxy address is changed.
- * @param[in] connection  The handle of connection
- * @param[in] callback  The callback function to be called
- * @param[in] user_data The user data passed to the callback function
- * @return 0 on success, otherwise negative error value.
- * @retval #CONNECTION_ERROR_NONE  Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER   Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED  Operation failed
- */
-int connection_set_proxy_address_changed_cb(connection_h connection, connection_address_changed_cb callback, void* user_data);
-
-/**
- * @brief Unregisters the callback called when the proxy address is changed.
- * @param[in] connection  The handle of connection
- * @return 0 on success, otherwise negative error value.
- * @retval #CONNECTION_ERROR_NONE  Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER   Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED  Operation failed
- */
-int connection_unset_proxy_address_changed_cb(connection_h connection);
-
-/**
- * @brief Adds new profile which is created by connection_profile_created().
- * @remarks You can only add a profile of cellular type.
- * @param[in] connection  The handle of connection
- * @param[in] profile  The handle of profile
- * @return 0 on success, otherwise negative error value.
- * @retval #CONNECTION_ERROR_NONE  Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER   Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED  Operation failed
- */
-int connection_add_profile(connection_h connection, connection_profile_h profile);
-
-/**
- * @brief Removes existing profile.
- * @param[in] connection  The handle of connection
- * @param[in] profile  The handle of profile
- * @return 0 on success, otherwise negative error value.
- * @retval #CONNECTION_ERROR_NONE  Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER   Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED  Operation failed
- */
-int connection_remove_profile(connection_h connection, connection_profile_h profile);
-
-/**
- * @brief Updates existing profile.
- * @details If you change somethings of a profile, this changes will be not applied to the Connection Manager immediately.
- * When you call this function, your changes affect the Connection Manager and the existing profile is updated.
- * In addition, the existing profile will be updated if you call connection_open_profile().
- * @param[in] connection  The handle of connection
- * @param[in] profile  The handle of profile
- * @return 0 on success, otherwise negative error value.
- * @retval #CONNECTION_ERROR_NONE  Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER   Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED  Operation failed
- * @see connection_open_profile()
- */
-int connection_update_profile(connection_h connection, connection_profile_h profile);
-
-/**
- * @brief Gets a iterator of the profiles.
- * @remarks @a profile_iterator must be released with connection_destroy().
- * @param[in] connection  The handle of connection
- * @param[in] type  The type of connetion iterator
- * @param[out] profile_iterator  The iterator of profile
- * @return 0 on success, otherwise negative error value.
- * @retval #CONNECTION_ERROR_NONE  Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER   Invalid parameter
- * @retval #CONNECTION_ERROR_OUT_OF_MEMORY  Out of memory
- * @retval #CONNECTION_ERROR_OPERATION_FAILED  Operation failed
- */
-int connection_get_profile_iterator(connection_h connection, connection_iterator_type_e type, connection_profile_iterator_h* profile_iterator);
-
-/**
- * @brief Moves the profile iterator to the next position and gets a profile handle.
- * @param[in] profile_iterator  The iterator of profile
- * @param[out] profile  The handle of profile
- * @return 0 on success, otherwise negative error value.
- * @retval #CONNECTION_ERROR_NONE  Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER   Invalid parameter
- * @retval #CONNECTION_ERROR_ITERATOR_END  End of iteration
- */
-int connection_profile_iterator_next(connection_profile_iterator_h profile_iterator, connection_profile_h* profile);
-
-/**
- * @brief Checks whether the next element of profile iterator exists or not.
- * @param[in] profile_iterator  The iterator of profile
- * @return @c true if next element exists, \n @c false if next element doesn't exist
- */
-bool connection_profile_iterator_has_next(connection_profile_iterator_h profile_iterator);
-
-/**
- * @brief Destroys a iterator of the profiles.
- * @param[in] profile_iterator  The iterator of profile
- * @return 0 on success, otherwise negative error value.
- * @retval #CONNECTION_ERROR_NONE  Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER   Invalid parameter
- */
-int connection_destroy_profile_iterator(connection_profile_iterator_h profile_iterator);
-
-/**
- * @brief Gets the name of default profile.
- * @remarks @a profile must be released with connection_profile_destroy().
- * @param[in] connection  The handle of connection
- * @param[out] profile  The handle of profile
- * @return 0 on success, otherwise negative error value.
- * @retval #CONNECTION_ERROR_NONE  Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER   Invalid parameter
- * @retval #CONNECTION_ERROR_OUT_OF_MEMORY  Out of memory
- * @retval #CONNECTION_ERROR_OPERATION_FAILED  Operation failed
- * @retval #CONNECTION_ERROR_NO_CONNECTION  There is no connection
- */
-int connection_get_current_profile(connection_h connection, connection_profile_h* profile);
-
-/**
- * @brief Gets the default profile which provides the given cellular service.
- * @remarks  @a profile must be released with connection_profile_destroy().
- * @param[in] connection  The handle of connection
- * @param[in] type  The type of cellular service. #CONNECTION_CELLULAR_SERVICE_TYPE_APPLICATION is not permitted
- * @param[out] profile  The handle of profile
- * @return 0 on success, otherwise negative error value.
- * @retval #CONNECTION_ERROR_NONE  Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER   Invalid parameter
- * @retval #CONNECTION_ERROR_OUT_OF_MEMORY  Out of memory
- * @retval #CONNECTION_ERROR_OPERATION_FAILED  Operation failed
- */
-int connection_get_default_cellular_service_profile(connection_h connection, connection_cellular_service_type_e type, connection_profile_h* profile);
-
-/**
- * @brief Sets the default profile which provides the given cellular service.
- * @param[in] connection  The handle of connection
- * @param[in] type  The type of cellular service.
- * #CONNECTION_CELLULAR_SERVICE_TYPE_INTERNET and #CONNECTION_CELLULAR_SERVICE_TYPE_PREPAID_INTERNET are only permitted.
- * @param[in] profile  The handle of profile
- * @return 0 on success, otherwise negative error value.
- * @retval #CONNECTION_ERROR_NONE  Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER   Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED  Operation failed
- */
-int connection_set_default_cellular_service_profile(connection_h connection, connection_cellular_service_type_e type, connection_profile_h profile);
-
-/**
- * @brief Sets the default profile which provides the given cellular service, asynchronously.
- * @param[in] connection  The handle of connection
- * @param[in] type  The type of cellular service.
- * #CONNECTION_CELLULAR_SERVICE_TYPE_INTERNET and #CONNECTION_CELLULAR_SERVICE_TYPE_PREPAID_INTERNET are only permitted.
- * @param[in] profile  The handle of profile
- * @param[in] callback  The callback function to be called
- * @param[in] user_data The user data passed to the callback function
- * @return 0 on success, otherwise negative error value.
- * @retval #CONNECTION_ERROR_NONE  Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER   Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED  Operation failed
- */
-int connection_set_default_cellular_service_profile_async(connection_h connection,
-		connection_cellular_service_type_e type, connection_profile_h profile, connection_set_default_cb callback, void* user_data);
-
-/**
-* @brief Called after connection_open_profile() is completed.
-* @param[in] result  The result
-* @param[in] user_data The user data passed from connection_open_profile()
-* @pre connection_open_profile() will invoke this callback function.
-* @see connection_open_profile()
-*/
-typedef void(*connection_opened_cb)(connection_error_e result, void* user_data);
-
-/**
-* @brief Called after connection_close_profile() is completed.
-* @param[in] result  The result
-* @param[in] user_data The user data passed from connection_close_profile()
-* @pre connection_close_profile() will invoke this callback function.
-* @see connection_close_profile()
-*/
-typedef void(*connection_closed_cb)(connection_error_e result, void* user_data);
-
-/**
- * @brief Opens a connection of profile, asynchronously.
- * @param[in] connection  The handle of connection
- * @param[in] profile  The handle of profile
- * @param[in] callback  The callback function to be called
- * @param[in] user_data The user data passed to the callback function
- * @return 0 on success, otherwise negative error value.
- * @retval #CONNECTION_ERROR_NONE  Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER   Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED  Operation failed
- * @post connection_opened_cb() will be invoked.
- * @see connection_opened_cb()
- * @see connection_close_profile()
- * @see connection_profile_set_state_changed_cb()
- * @see connection_profile_unset_state_changed_cb()
- * @see connection_profile_state_changed_cb()
- */
-int connection_open_profile(connection_h connection, connection_profile_h profile, connection_opened_cb callback, void* user_data);
-
-/**
- * @brief Closes a connection of profile.
- * @param[in] connection  The handle of connection
- * @param[in] profile  The handle of profile
- * @param[in] callback  The callback function to be called
- * @param[in] user_data The user data passed to the callback function
- * @return 0 on success, otherwise negative error value.
- * @retval #CONNECTION_ERROR_NONE  Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER   Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED  Operation failed
- * @post connection_closed_cb() will be invoked.
- * @see connection_closed_cb()
- * @see connection_open_profile()
- * @see connection_profile_set_state_changed_cb()
- * @see connection_profile_unset_state_changed_cb()
- * @see connection_profile_state_changed_cb()
- */
-int connection_close_profile(connection_h connection, connection_profile_h profile, connection_closed_cb callback, void* user_data);
-
-/**
- * @brief Add a route to routing table.
- * @details You can get the @a interface_name from connection_profile_get_network_interface_name() of opened profile.
- * @param[in] connection  The handle of connection
- * @param[in] interface_name  The name of network interface
- * @param[in] host_address  The IP address of the host
- * @return 0 on success, otherwise negative error value.
- * @retval #CONNECTION_ERROR_NONE  Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER   Invalid parameter
- * @retval #CONNECTION_ERROR_ALREADY_EXISTS  Already exists
- * @retval #CONNECTION_ERROR_OPERATION_FAILED  Operation failed
- * @see connection_profile_get_network_interface_name()
- */
-int connection_add_route(connection_h connection, const char* interface_name, const char* host_address);
-
-/**
- * @brief Remove a route from routing table.
- * @details You can get the @a interface_name from connection_profile_get_network_interface_name() of opened profile.
- * @param[in] connection  The handle of connection
- * @param[in] interface_name  The name of network interface
- * @param[in] host_address  The IP address of the host
- * @return 0 on success, otherwise negative error value.
- * @retval #CONNECTION_ERROR_NONE  Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER   Invalid parameter
- * @retval #CONNECTION_ERROR_ALREADY_EXISTS  Already exists
- * @retval #CONNECTION_ERROR_OPERATION_FAILED  Operation failed
- * @see connection_profile_get_network_interface_name()
- */
-int connection_remove_route(connection_h connection, const char* interface_name, const char* host_address);
-
-/**
- * @}
-*/
-
-/**
- * @addtogroup CAPI_NETWORK_CONNECTION_STATISTICS_MODULE
- * @{
-*/
-
-/**
- * @brief Gets the statistics information.
- * @param[in] connection  The handle of connection
- * @param[in] connection_type  The type of connection. CONNECTION_TYPE_WIFI and CONNECTION_TYPE_CELLULAR are only supported.
- * @param[in] statistics_type  The type of statistics
- * @param[out] size  The received data size of the last cellular packet data connection (bytes)
- * @return 0 on success, otherwise negative error value.
- * @retval #CONNECTION_ERROR_NONE  Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER  Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED  Operation failed
- */
-int connection_get_statistics(connection_h connection, connection_type_e connection_type, connection_statistics_type_e statistics_type, long long* size);
-
-/**
- * @brief Resets the statistics information
- * @param[in] connection  The handle of connection
- * @param[in] connection_type  The type of connection. CONNECTION_TYPE_WIFI and CONNECTION_TYPE_CELLULAR are only supported.
- * @param[in] statistics_type  The type of statistics
- * @return 0 on success, otherwise negative error value.
- * @retval #CONNECTION_ERROR_NONE Successful
- * @retval #CONNECTION_ERROR_INVALID_PARAMETER   Invalid parameter
- * @retval #CONNECTION_ERROR_OPERATION_FAILED  Operation failed
- */
-int connection_reset_statistics(connection_h connection, connection_type_e connection_type, connection_statistics_type_e statistics_type);
-
-#ifdef __cplusplus
-}
-#endif /* __cplusplus */
-
-#endif
diff --git a/wearable/include/net_connection_private.h b/wearable/include/net_connection_private.h
deleted file mode 100644
index 0998eed..0000000
--- a/wearable/include/net_connection_private.h
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- * Copyright (c) 2011-2013 Samsung Electronics Co., Ltd All Rights Reserved
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License. 
- */
-
-#ifndef __NET_CONNECTION_PRIVATE_H__
-#define __NET_CONNECTION_PRIVATE_H__
-
-#include <dlog.h>
-#include <network-cm-intf.h>
-#include <network-wifi-intf.h>
-
-#include "net_connection.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif /* __cplusplus */
-
-#undef LOG_TAG
-#define LOG_TAG "CAPI_NETWORK_CONNECTION"
-
-#define CONNECTION_INFO		1
-#define CONNECTION_ERROR	2
-#define CONNECTION_WARN		3
-
-#define CONNECTION_LOG(log_level, format, args...) \
-	do { \
-		switch (log_level) { \
-		case CONNECTION_ERROR: \
-			LOGE(format, ## args); \
-			break; \
-		case CONNECTION_WARN: \
-			LOGW(format, ## args); \
-			break; \
-		default: \
-			LOGI(format, ## args); \
-		} \
-	} while(0)
-
-#define SECURE_CONNECTION_LOG(log_level, format, args...) \
-	do { \
-		switch (log_level) { \
-		case CONNECTION_ERROR: \
-			SECURE_LOGE(format, ## args); \
-			break; \
-		case CONNECTION_WARN: \
-			SECURE_LOGW(format, ## args); \
-			break; \
-		default: \
-			SECURE_LOGI(format, ## args); \
-		} \
-	} while(0)
-
-bool _connection_is_created(void);
-
-bool _connection_libnet_init(void);
-bool _connection_libnet_deinit(void);
-bool _connection_libnet_get_wifi_state(connection_wifi_state_e *state);
-bool _connection_libnet_get_ethernet_state(connection_ethernet_state_e *state);
-bool _connection_libnet_get_bluetooth_state(connection_bt_state_e* state);
-bool _connection_libnet_check_profile_validity(connection_profile_h profile);
-bool _connection_libnet_check_profile_cb_validity(connection_profile_h profile);
-int _connection_libnet_get_profile_iterator(connection_iterator_type_e type,
-				connection_profile_iterator_h *profile_iterator);
-bool _connection_libnet_iterator_has_next(connection_profile_iterator_h profile_iterator);
-int _connection_libnet_get_iterator_next(connection_profile_iterator_h profile_iter_h, connection_profile_h *profile);
-int _connection_libnet_destroy_iterator(connection_profile_iterator_h profile_iter_h);
-int _connection_libnet_get_current_profile(connection_profile_h *profile);
-int _connection_libnet_open_profile(connection_profile_h profile, connection_opened_cb callback, void *user_data);
-int _connection_libnet_get_cellular_service_profile(connection_cellular_service_type_e type, connection_profile_h *profile);
-int _connection_libnet_set_cellular_service_profile_sync(connection_cellular_service_type_e type, connection_profile_h profile);
-int _connection_libnet_set_cellular_service_profile_async(connection_cellular_service_type_e type,
-			connection_profile_h profile, connection_set_default_cb callback, void* user_data);
-int _connection_libnet_close_profile(connection_profile_h profile, connection_closed_cb callback, void *user_data);
-int _connection_libnet_add_route(const char *interface_name, const char *host_address);
-int _connection_libnet_remove_route(const char *interface_name, const char *host_address);
-void _connection_libnet_add_to_profile_list(connection_profile_h profile);
-void _connection_libnet_remove_from_profile_list(connection_profile_h profile);
-bool _connection_libnet_add_to_profile_cb_list(connection_profile_h profile,
-		connection_profile_state_changed_cb callback, void *user_data);
-bool _connection_libnet_remove_from_profile_cb_list(connection_profile_h profile);
-int _connection_libnet_set_statistics(net_device_t device_type, net_statistics_type_e statistics_type);
-int _connection_libnet_get_statistics(net_statistics_type_e statistics_type, unsigned long long *size);
-
-guint _connectioin_callback_add(GSourceFunc func, gpointer user_data);
-void _connection_callback_cleanup(void);
-
-connection_cellular_service_type_e _profile_convert_to_connection_cellular_service_type(net_service_type_t svc_type);
-connection_profile_state_e _profile_convert_to_cp_state(net_state_type_t state);
-net_service_type_t _connection_profile_convert_to_libnet_cellular_service_type(connection_cellular_service_type_e svc_type);
-net_state_type_t _connection_profile_convert_to_net_state(connection_profile_state_e state);
-
-#ifdef __cplusplus
-}
-#endif /* __cplusplus */
-
-#endif