tizen 2.3 releasetizen_2.3_releasesubmit/tizen_2.3/20150202.052836tizen_2.3

82 files changed, 112 insertions, 1292 deletions

diff --git a/mobile/AUTHORS b/AUTHORS
index 46d1687..46d1687 100644
--- a/mobile/AUTHORS
+++ b/AUTHORS
diff --git a/mobile/CMakeLists.txt b/CMakeLists.txt
index 94e9747..94e9747 100644
--- a/mobile/CMakeLists.txt
+++ b/CMakeLists.txt
diff --git a/wearable/LICENSE.APLv2 b/LICENSE.APLv2
index a06208b..a06208b 100644
--- a/wearable/LICENSE.APLv2
+++ b/LICENSE.APLv2
diff --git a/mobile/LICENSE.Broadcom b/LICENSE.Broadcom
index acf4e62..acf4e62 100644
--- a/mobile/LICENSE.Broadcom
+++ b/LICENSE.Broadcom
diff --git a/mobile/NOTICE b/NOTICE
index 411d0c9..411d0c9 100644
--- a/mobile/NOTICE
+++ b/NOTICE
diff --git a/mobile/bluetooth-firmware-bcm.manifest b/bluetooth-firmware-bcm.manifest
index a3dc534..a3dc534 100644
--- a/mobile/bluetooth-firmware-bcm.manifest
+++ b/bluetooth-firmware-bcm.manifest
diff --git a/wearable/firmware/BCM20710A1_001.002.014.0028.0048.hcd b/firmware/BCM20710A1_001.002.014.0028.0048.hcd
index 86f5319..86f5319 100644
--- a/wearable/firmware/BCM20710A1_001.002.014.0028.0048.hcd
+++ b/firmware/BCM20710A1_001.002.014.0028.0048.hcd
diff --git a/wearable/firmware/BCM20710A1_001.002.014.0052.0000_Samsung_Tizen_Lite_TEST_ONLY.hcd b/firmware/BCM20710A1_001.002.014.0052.0000_Samsung_Tizen_Lite_TEST_ONLY.hcd
index c00a05a..c00a05a 100644
--- a/wearable/firmware/BCM20710A1_001.002.014.0052.0000_Samsung_Tizen_Lite_TEST_ONLY.hcd
+++ b/firmware/BCM20710A1_001.002.014.0052.0000_Samsung_Tizen_Lite_TEST_ONLY.hcd
diff --git a/wearable/firmware/BCM20710A1_001.002.014.0056.0000_Samsung_Tizen_Lite_TEST_ONLY.hcd b/firmware/BCM20710A1_001.002.014.0056.0000_Samsung_Tizen_Lite_TEST_ONLY.hcd
index 074959f..074959f 100644
--- a/wearable/firmware/BCM20710A1_001.002.014.0056.0000_Samsung_Tizen_Lite_TEST_ONLY.hcd
+++ b/firmware/BCM20710A1_001.002.014.0056.0000_Samsung_Tizen_Lite_TEST_ONLY.hcd
diff --git a/wearable/firmware/BCM20710A1_001.002.014.0059.0060.hcd b/firmware/BCM20710A1_001.002.014.0059.0060.hcd
index 15921ed..15921ed 100644
--- a/wearable/firmware/BCM20710A1_001.002.014.0059.0060.hcd
+++ b/firmware/BCM20710A1_001.002.014.0059.0060.hcd
diff --git a/wearable/firmware/BCM4330B1_002.001.003.0013.0000_SS-SLP7-B42_NoExtLNA_37_4MHz-TEST-ONLY.hcd b/firmware/BCM4330B1_002.001.003.0013.0000_SS-SLP7-B42_NoExtLNA_37_4MHz-TEST-ONLY.hcd
index 7b3f3ab..7b3f3ab 100644
--- a/wearable/firmware/BCM4330B1_002.001.003.0013.0000_SS-SLP7-B42_NoExtLNA_37_4MHz-TEST-ONLY.hcd
+++ b/firmware/BCM4330B1_002.001.003.0013.0000_SS-SLP7-B42_NoExtLNA_37_4MHz-TEST-ONLY.hcd
diff --git a/mobile/firmware/BCM4330B1_002.001.003.0221.0265.hcd b/firmware/BCM4330B1_002.001.003.0221.0265.hcd
index a8c7f30..a8c7f30 100644
--- a/mobile/firmware/BCM4330B1_002.001.003.0221.0265.hcd
+++ b/firmware/BCM4330B1_002.001.003.0221.0265.hcd
diff --git a/mobile/firmware/BCM4334B0_002.001.013.0079.0081.hcd b/firmware/BCM4334B0_002.001.013.0079.0081.hcd
index ff13214..ff13214 100644
--- a/mobile/firmware/BCM4334B0_002.001.013.0079.0081.hcd
+++ b/firmware/BCM4334B0_002.001.013.0079.0081.hcd
diff --git a/wearable/firmware/BCM4334B0_002.001.013.0079.0083.hcd b/firmware/BCM4334B0_002.001.013.0079.0083.hcd
index bb49859..bb49859 100644
--- a/wearable/firmware/BCM4334B0_002.001.013.0079.0083.hcd
+++ b/firmware/BCM4334B0_002.001.013.0079.0083.hcd
diff --git a/wearable/firmware/BCM4334B0_002.001.013.0079.0084.hcd b/firmware/BCM4334B0_002.001.013.0079.0084.hcd
index 72c588b..72c588b 100644
--- a/wearable/firmware/BCM4334B0_002.001.013.0079.0084.hcd
+++ b/firmware/BCM4334B0_002.001.013.0079.0084.hcd
diff --git a/wearable/firmware/BCM4334B0_002.001.013.0779.0950.hcd b/firmware/BCM4334B0_002.001.013.0779.0950.hcd
index e638b17..e638b17 100644
--- a/wearable/firmware/BCM4334B0_002.001.013.0779.0950.hcd
+++ b/firmware/BCM4334B0_002.001.013.0779.0950.hcd
diff --git a/wearable/firmware/BCM4334B0_002.001.013.0942.1036.hcd b/firmware/BCM4334B0_002.001.013.0942.1036.hcd
index b220558..b220558 100644
--- a/wearable/firmware/BCM4334B0_002.001.013.0942.1036.hcd
+++ b/firmware/BCM4334B0_002.001.013.0942.1036.hcd
diff --git a/wearable/firmware/BCM4334B0_002.001.013.1024.1064.hcd b/firmware/BCM4334B0_002.001.013.1024.1064.hcd
index 8c5a5fd..8c5a5fd 100644
--- a/wearable/firmware/BCM4334B0_002.001.013.1024.1064.hcd
+++ b/firmware/BCM4334B0_002.001.013.1024.1064.hcd
diff --git a/wearable/firmware/CMakeLists.txt b/firmware/CMakeLists.txt
index f4aa7e8..d81ecc7 100644
--- a/wearable/firmware/CMakeLists.txt
+++ b/firmware/CMakeLists.txt
@@ -1,6 +1,7 @@
 # install firmware
 # files for c210
-INSTALL(FILES ${CMAKE_CURRENT_SOURCE_DIR}/BCM4330B1_002.001.003.0013.0000_SS-SLP7-B42_NoExtLNA_37_4MHz-TEST-ONLY.hcd DESTINATION ${PLUGIN_INSTALL_PREFIX}/etc/bluetooth)
+INSTALL(FILES ${CMAKE_CURRENT_SOURCE_DIR}/BCM4334B0_002.001.013.0079.0081.hcd DESTINATION ${PLUGIN_INSTALL_PREFIX}/etc/bluetooth)
+#INSTALL(FILES ${CMAKE_CURRENT_SOURCE_DIR}/BCM4330B1_002.001.003.0013.0000_SS-SLP7-B42_NoExtLNA_37_4MHz-TEST-ONLY.hcd DESTINATION ${PLUGIN_INSTALL_PREFIX}/etc/bluetooth)
 INSTALL(FILES ${CMAKE_CURRENT_SOURCE_DIR}/BCM4330B1_002.001.003.0221.0265.hcd DESTINATION ${PLUGIN_INSTALL_PREFIX}/etc/bluetooth)
 
 # files for e4112 (W)
diff --git a/wearable/firmware/bcm4334w/BCM43342A1_001.002.003.0874.0000_SEMCO_B58_TEST_ONLY.hcd b/firmware/bcm4334w/BCM43342A1_001.002.003.0874.0000_SEMCO_B58_TEST_ONLY.hcd
index 7bf762a..7bf762a 100644
--- a/wearable/firmware/bcm4334w/BCM43342A1_001.002.003.0874.0000_SEMCO_B58_TEST_ONLY.hcd
+++ b/firmware/bcm4334w/BCM43342A1_001.002.003.0874.0000_SEMCO_B58_TEST_ONLY.hcd
diff --git a/wearable/firmware/bcm4334w/BCM43342A1_001.002.003.0987.0000_Samsung_Rinato_Tizen_ePA_RFtest_LE_7dBm.hcd b/firmware/bcm4334w/BCM43342A1_001.002.003.0987.0000_Samsung_Rinato_Tizen_ePA_RFtest_LE_7dBm.hcd
index 52bba4e..52bba4e 100644
--- a/wearable/firmware/bcm4334w/BCM43342A1_001.002.003.0987.0000_Samsung_Rinato_Tizen_ePA_RFtest_LE_7dBm.hcd
+++ b/firmware/bcm4334w/BCM43342A1_001.002.003.0987.0000_Samsung_Rinato_Tizen_ePA_RFtest_LE_7dBm.hcd
diff --git a/wearable/firmware/bcm4334w/BCM4334B0_002.001.013.1675.1676_B2_ORC.hcd b/firmware/bcm4334w/BCM4334B0_002.001.013.1675.1676_B2_ORC.hcd
index 3d4af56..3d4af56 100644
--- a/wearable/firmware/bcm4334w/BCM4334B0_002.001.013.1675.1676_B2_ORC.hcd
+++ b/firmware/bcm4334w/BCM4334B0_002.001.013.1675.1676_B2_ORC.hcd
diff --git a/wearable/firmware/bcm4334w/BCM4334W_001.002.003.0874.0000_Samsung_Rinato_TEST_ONLY.hcd b/firmware/bcm4334w/BCM4334W_001.002.003.0874.0000_Samsung_Rinato_TEST_ONLY.hcd
index cff7470..cff7470 100644
--- a/wearable/firmware/bcm4334w/BCM4334W_001.002.003.0874.0000_Samsung_Rinato_TEST_ONLY.hcd
+++ b/firmware/bcm4334w/BCM4334W_001.002.003.0874.0000_Samsung_Rinato_TEST_ONLY.hcd
diff --git a/wearable/firmware/bcm4334w/BCM4334W_001.002.003.0874.0000_ePA_SEMCO_B58_TEST_ONLY.hcd b/firmware/bcm4334w/BCM4334W_001.002.003.0874.0000_ePA_SEMCO_B58_TEST_ONLY.hcd
index 889525e..889525e 100644
--- a/wearable/firmware/bcm4334w/BCM4334W_001.002.003.0874.0000_ePA_SEMCO_B58_TEST_ONLY.hcd
+++ b/firmware/bcm4334w/BCM4334W_001.002.003.0874.0000_ePA_SEMCO_B58_TEST_ONLY.hcd
diff --git a/wearable/firmware/bcm4334w/BCM4334W_001.002.003.0987.0000_Samsung_Rinato_M7_TEST_ONLY_GGPatch.hcd b/firmware/bcm4334w/BCM4334W_001.002.003.0987.0000_Samsung_Rinato_M7_TEST_ONLY_GGPatch.hcd
index 240374a..240374a 100755
--- a/wearable/firmware/bcm4334w/BCM4334W_001.002.003.0987.0000_Samsung_Rinato_M7_TEST_ONLY_GGPatch.hcd
+++ b/firmware/bcm4334w/BCM4334W_001.002.003.0987.0000_Samsung_Rinato_M7_TEST_ONLY_GGPatch.hcd
diff --git a/wearable/firmware/bcm4334w/BCM4334W_001.002.003.0987.1017.hcd b/firmware/bcm4334w/BCM4334W_001.002.003.0987.1017.hcd
index e258c55..e258c55 100755
--- a/wearable/firmware/bcm4334w/BCM4334W_001.002.003.0987.1017.hcd
+++ b/firmware/bcm4334w/BCM4334W_001.002.003.0987.1017.hcd
diff --git a/wearable/firmware/bcm4334w/BCM4334W_001.002.003.0995.1021_B58_ePA.HCD b/firmware/bcm4334w/BCM4334W_001.002.003.0995.1021_B58_ePA.HCD
index 0ce92aa..0ce92aa 100644
--- a/wearable/firmware/bcm4334w/BCM4334W_001.002.003.0995.1021_B58_ePA.HCD
+++ b/firmware/bcm4334w/BCM4334W_001.002.003.0995.1021_B58_ePA.HCD
diff --git a/wearable/firmware/bcm4334w/BCM4334W_001.002.003.0997.1024_B58_ePA.hcd b/firmware/bcm4334w/BCM4334W_001.002.003.0997.1024_B58_ePA.hcd
index 641de30..641de30 100644
--- a/wearable/firmware/bcm4334w/BCM4334W_001.002.003.0997.1024_B58_ePA.hcd
+++ b/firmware/bcm4334w/BCM4334W_001.002.003.0997.1024_B58_ePA.hcd
diff --git a/wearable/firmware/bcm4334w/BCM4334W_001.002.003.0997.1027_B58_ePA.hcd b/firmware/bcm4334w/BCM4334W_001.002.003.0997.1027_B58_ePA.hcd
index bd8a0f0..bd8a0f0 100644
--- a/wearable/firmware/bcm4334w/BCM4334W_001.002.003.0997.1027_B58_ePA.hcd
+++ b/firmware/bcm4334w/BCM4334W_001.002.003.0997.1027_B58_ePA.hcd
diff --git a/wearable/firmware/bcm4334w/BCM4334W_Generic_37_4MHz_wlcsp_Rinato_ePA_TestOnly.hcd b/firmware/bcm4334w/BCM4334W_Generic_37_4MHz_wlcsp_Rinato_ePA_TestOnly.hcd
index 006a4f0..006a4f0 100644
--- a/wearable/firmware/bcm4334w/BCM4334W_Generic_37_4MHz_wlcsp_Rinato_ePA_TestOnly.hcd
+++ b/firmware/bcm4334w/BCM4334W_Generic_37_4MHz_wlcsp_Rinato_ePA_TestOnly.hcd
diff --git a/wearable/firmware/bcm4334w/BCM4334W_Rinato_TestOnly.hcd b/firmware/bcm4334w/BCM4334W_Rinato_TestOnly.hcd
index cfc3228..cfc3228 100644
--- a/wearable/firmware/bcm4334w/BCM4334W_Rinato_TestOnly.hcd
+++ b/firmware/bcm4334w/BCM4334W_Rinato_TestOnly.hcd
diff --git a/wearable/firmware/bcm4334w/configdata_wlcsp_Semco_B58_ePA_TestOnly.hcd b/firmware/bcm4334w/configdata_wlcsp_Semco_B58_ePA_TestOnly.hcd
index 16ccaec..16ccaec 100755
--- a/wearable/firmware/bcm4334w/configdata_wlcsp_Semco_B58_ePA_TestOnly.hcd
+++ b/firmware/bcm4334w/configdata_wlcsp_Semco_B58_ePA_TestOnly.hcd
diff --git a/wearable/firmware/bcm4335/BCM4335B0_002.001.006.0203.0206_ORC_JF-LTE.hcd b/firmware/bcm4335/BCM4335B0_002.001.006.0203.0206_ORC_JF-LTE.hcd
index 549b2c0..549b2c0 100644
--- a/wearable/firmware/bcm4335/BCM4335B0_002.001.006.0203.0206_ORC_JF-LTE.hcd
+++ b/firmware/bcm4335/BCM4335B0_002.001.006.0203.0206_ORC_JF-LTE.hcd
diff --git a/wearable/firmware/bcm4335/BCM4335B0_002.001.006.0233.0234_ORC_RedWood.hcd b/firmware/bcm4335/BCM4335B0_002.001.006.0233.0234_ORC_RedWood.hcd
index f8a7e30..f8a7e30 100644
--- a/wearable/firmware/bcm4335/BCM4335B0_002.001.006.0233.0234_ORC_RedWood.hcd
+++ b/firmware/bcm4335/BCM4335B0_002.001.006.0233.0234_ORC_RedWood.hcd
diff --git a/wearable/firmware/bcm4335/ReleaseNotes_BCM4335B0_002.001.006.0233.0234_ORC_Samsung_RedWood_BT4.0_37_4MHz.txt b/firmware/bcm4335/ReleaseNotes_BCM4335B0_002.001.006.0233.0234_ORC_Samsung_RedWood_BT4.0_37_4MHz.txt
index 7d89def..7d89def 100644
--- a/wearable/firmware/bcm4335/ReleaseNotes_BCM4335B0_002.001.006.0233.0234_ORC_Samsung_RedWood_BT4.0_37_4MHz.txt
+++ b/firmware/bcm4335/ReleaseNotes_BCM4335B0_002.001.006.0233.0234_ORC_Samsung_RedWood_BT4.0_37_4MHz.txt
diff --git a/wearable/firmware/bcm4339/BCM4339_003.001.009.0025.0053_ORC_H-LTE.hcd b/firmware/bcm4339/BCM4339_003.001.009.0025.0053_ORC_H-LTE.hcd
index eff6033..eff6033 100644
--- a/wearable/firmware/bcm4339/BCM4339_003.001.009.0025.0053_ORC_H-LTE.hcd
+++ b/firmware/bcm4339/BCM4339_003.001.009.0025.0053_ORC_H-LTE.hcd
diff --git a/wearable/firmware/bcm4339/BCM4339_003.001.009.0028.0085_RedWood.hcd b/firmware/bcm4339/BCM4339_003.001.009.0028.0085_RedWood.hcd
index dafb51c..dafb51c 100644
--- a/wearable/firmware/bcm4339/BCM4339_003.001.009.0028.0085_RedWood.hcd
+++ b/firmware/bcm4339/BCM4339_003.001.009.0028.0085_RedWood.hcd
diff --git a/wearable/firmware/bcm4339/BCM4339_003.001.009.0030.0122_ORC_RedWood.hcd b/firmware/bcm4339/BCM4339_003.001.009.0030.0122_ORC_RedWood.hcd
index e9c72be..e9c72be 100644
--- a/wearable/firmware/bcm4339/BCM4339_003.001.009.0030.0122_ORC_RedWood.hcd
+++ b/firmware/bcm4339/BCM4339_003.001.009.0030.0122_ORC_RedWood.hcd
diff --git a/mobile/LICENSE.APLv2 b/mobile/LICENSE.APLv2
deleted file mode 100644
index 6b0b127..0000000
--- a/mobile/LICENSE.APLv2
+++ /dev/null
@@ -1,203 +0,0 @@
-
-                                 Apache License
-                           Version 2.0, January 2004
-                        http://www.apache.org/licenses/
-
-   TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
-
-   1. Definitions.
-
-      "License" shall mean the terms and conditions for use, reproduction,
-      and distribution as defined by Sections 1 through 9 of this document.
-
-      "Licensor" shall mean the copyright owner or entity authorized by
-      the copyright owner that is granting the License.
-
-      "Legal Entity" shall mean the union of the acting entity and all
-      other entities that control, are controlled by, or are under common
-      control with that entity. For the purposes of this definition,
-      "control" means (i) the power, direct or indirect, to cause the
-      direction or management of such entity, whether by contract or
-      otherwise, or (ii) ownership of fifty percent (50%) or more of the
-      outstanding shares, or (iii) beneficial ownership of such entity.
-
-      "You" (or "Your") shall mean an individual or Legal Entity
-      exercising permissions granted by this License.
-
-      "Source" form shall mean the preferred form for making modifications,
-      including but not limited to software source code, documentation
-      source, and configuration files.
-
-      "Object" form shall mean any form resulting from mechanical
-      transformation or translation of a Source form, including but
-      not limited to compiled object code, generated documentation,
-      and conversions to other media types.
-
-      "Work" shall mean the work of authorship, whether in Source or
-      Object form, made available under the License, as indicated by a
-      copyright notice that is included in or attached to the work
-      (an example is provided in the Appendix below).
-
-      "Derivative Works" shall mean any work, whether in Source or Object
-      form, that is based on (or derived from) the Work and for which the
-      editorial revisions, annotations, elaborations, or other modifications
-      represent, as a whole, an original work of authorship. For the purposes
-      of this License, Derivative Works shall not include works that remain
-      separable from, or merely link (or bind by name) to the interfaces of,
-      the Work and Derivative Works thereof.
-
-      "Contribution" shall mean any work of authorship, including
-      the original version of the Work and any modifications or additions
-      to that Work or Derivative Works thereof, that is intentionally
-      submitted to Licensor for inclusion in the Work by the copyright owner
-      or by an individual or Legal Entity authorized to submit on behalf of
-      the copyright owner. For the purposes of this definition, "submitted"
-      means any form of electronic, verbal, or written communication sent
-      to the Licensor or its representatives, including but not limited to
-      communication on electronic mailing lists, source code control systems,
-      and issue tracking systems that are managed by, or on behalf of, the
-      Licensor for the purpose of discussing and improving the Work, but
-      excluding communication that is conspicuously marked or otherwise
-      designated in writing by the copyright owner as "Not a Contribution."
-
-      "Contributor" shall mean Licensor and any individual or Legal Entity
-      on behalf of whom a Contribution has been received by Licensor and
-      subsequently incorporated within the Work.
-
-   2. Grant of Copyright License. Subject to the terms and conditions of
-      this License, each Contributor hereby grants to You a perpetual,
-      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
-      copyright license to reproduce, prepare Derivative Works of,
-      publicly display, publicly perform, sublicense, and distribute the
-      Work and such Derivative Works in Source or Object form.
-
-   3. Grant of Patent License. Subject to the terms and conditions of
-      this License, each Contributor hereby grants to You a perpetual,
-      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
-      (except as stated in this section) patent license to make, have made,
-      use, offer to sell, sell, import, and otherwise transfer the Work,
-      where such license applies only to those patent claims licensable
-      by such Contributor that are necessarily infringed by their
-      Contribution(s) alone or by combination of their Contribution(s)
-      with the Work to which such Contribution(s) was submitted. If You
-      institute patent litigation against any entity (including a
-      cross-claim or counterclaim in a lawsuit) alleging that the Work
-      or a Contribution incorporated within the Work constitutes direct
-      or contributory patent infringement, then any patent licenses
-      granted to You under this License for that Work shall terminate
-      as of the date such litigation is filed.
-
-   4. Redistribution. You may reproduce and distribute copies of the
-      Work or Derivative Works thereof in any medium, with or without
-      modifications, and in Source or Object form, provided that You
-      meet the following conditions:
-
-      (a) You must give any other recipients of the Work or
-          Derivative Works a copy of this License; and
-
-      (b) You must cause any modified files to carry prominent notices
-          stating that You changed the files; and
-
-      (c) You must retain, in the Source form of any Derivative Works
-          that You distribute, all copyright, patent, trademark, and
-          attribution notices from the Source form of the Work,
-          excluding those notices that do not pertain to any part of
-          the Derivative Works; and
-
-      (d) If the Work includes a "NOTICE" text file as part of its
-          distribution, then any Derivative Works that You distribute must
-          include a readable copy of the attribution notices contained
-          within such NOTICE file, excluding those notices that do not
-          pertain to any part of the Derivative Works, in at least one
-          of the following places: within a NOTICE text file distributed
-          as part of the Derivative Works; within the Source form or
-          documentation, if provided along with the Derivative Works; or,
-          within a display generated by the Derivative Works, if and
-          wherever such third-party notices normally appear. The contents
-          of the NOTICE file are for informational purposes only and
-          do not modify the License. You may add Your own attribution
-          notices within Derivative Works that You distribute, alongside
-          or as an addendum to the NOTICE text from the Work, provided
-          that such additional attribution notices cannot be construed
-          as modifying the License.
-
-      You may add Your own copyright statement to Your modifications and
-      may provide additional or different license terms and conditions
-      for use, reproduction, or distribution of Your modifications, or
-      for any such Derivative Works as a whole, provided Your use,
-      reproduction, and distribution of the Work otherwise complies with
-      the conditions stated in this License.
-
-   5. Submission of Contributions. Unless You explicitly state otherwise,
-      any Contribution intentionally submitted for inclusion in the Work
-      by You to the Licensor shall be under the terms and conditions of
-      this License, without any additional terms or conditions.
-      Notwithstanding the above, nothing herein shall supersede or modify
-      the terms of any separate license agreement you may have executed
-      with Licensor regarding such Contributions.
-
-   6. Trademarks. This License does not grant permission to use the trade
-      names, trademarks, service marks, or product names of the Licensor,
-      except as required for reasonable and customary use in describing the
-      origin of the Work and reproducing the content of the NOTICE file.
-
-   7. Disclaimer of Warranty. Unless required by applicable law or
-      agreed to in writing, Licensor provides the Work (and each
-      Contributor provides its Contributions) on an "AS IS" BASIS,
-      WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
-      implied, including, without limitation, any warranties or conditions
-      of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A
-      PARTICULAR PURPOSE. You are solely responsible for determining the
-      appropriateness of using or redistributing the Work and assume any
-      risks associated with Your exercise of permissions under this License.
-
-   8. Limitation of Liability. In no event and under no legal theory,
-      whether in tort (including negligence), contract, or otherwise,
-      unless required by applicable law (such as deliberate and grossly
-      negligent acts) or agreed to in writing, shall any Contributor be
-      liable to You for damages, including any direct, indirect, special,
-      incidental, or consequential damages of any character arising as a
-      result of this License or out of the use or inability to use the
-      Work (including but not limited to damages for loss of goodwill,
-      work stoppage, computer failure or malfunction, or any and all
-      other commercial damages or losses), even if such Contributor
-      has been advised of the possibility of such damages.
-
-   9. Accepting Warranty or Additional Liability. While redistributing
-      the Work or Derivative Works thereof, You may choose to offer,
-      and charge a fee for, acceptance of support, warranty, indemnity,
-      or other liability obligations and/or rights consistent with this
-      License. However, in accepting such obligations, You may act only
-      on Your own behalf and on Your sole responsibility, not on behalf
-      of any other Contributor, and only if You agree to indemnify,
-      defend, and hold each Contributor harmless for any liability
-      incurred by, or claims asserted against, such Contributor by reason
-      of your accepting any such warranty or additional liability.
-
-   END OF TERMS AND CONDITIONS
-
-   APPENDIX: How to apply the Apache License to your work.
-
-      To apply the Apache License to your work, attach the following
-      boilerplate notice, with the fields enclosed by brackets "[]"
-      replaced with your own identifying information. (Don't include
-      the brackets!)  The text should be enclosed in the appropriate
-      comment syntax for the file format. We also recommend that a
-      file or class name and description of purpose be included on the
-      same "printed page" as the copyright notice for easier
-      identification within third-party archives.
-
-   Copyright [yyyy] [name of copyright owner]
-
-   Licensed under the Apache License, Version 2.0 (the "License");
-   you may not use this file except in compliance with the License.
-   You may obtain a copy of the License at
-
-       http://www.apache.org/licenses/LICENSE-2.0
-
-   Unless required by applicable law or agreed to in writing, software
-   distributed under the License is distributed on an "AS IS" BASIS,
-   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-   See the License for the specific language governing permissions and
-   limitations under the License.
-
diff --git a/mobile/debian/bluetooth-firmware-bcm.install b/mobile/debian/bluetooth-firmware-bcm.install
deleted file mode 100644
index a99d1b4..0000000
--- a/mobile/debian/bluetooth-firmware-bcm.install
+++ /dev/null
@@ -1,2 +0,0 @@
-usr/bin/*
-usr/etc/bluetooth/BCM4330B1_002.001.003.0221.0265.hcd
diff --git a/mobile/debian/bluetooth-firmware-bcm.postinst.in b/mobile/debian/bluetooth-firmware-bcm.postinst.in
deleted file mode 100644
index cb03b3c..0000000
--- a/mobile/debian/bluetooth-firmware-bcm.postinst.in
+++ /dev/null
@@ -1,10 +0,0 @@
-#!/bin/sh
-
-# Change File Permission
-chmod 644 @PREFIX@/etc/bluetooth/BCM4330B1_002.001.003.0221.0265.hcd
-
-# root case
-if [ ${USER} = "root" ]
-then
-	chown root:root @PREFIX@/etc/bluetooth/BCM4330B1_002.001.003.0221.0265.hcd
-fi
diff --git a/mobile/debian/changelog b/mobile/debian/changelog
deleted file mode 100755
index bb496ac..0000000
--- a/mobile/debian/changelog
+++ /dev/null
@@ -1,35 +0,0 @@
-bluetooth-firmware-bcm (0.2.28) precise; urgency=low
-
-  * Synchronize the code with Private git
-
- -- Jaekyun Lee <jkyun.ee@samsung.com>  Fri, 07 Dec 2012 14:53:59 +0900
-
-bluetooth-firmware-bcm (0.1.4) unstable; urgency=low
-
-  * Add e4412 firmware
-
- -- Jaekyun Lee <jkyun.lee@samsung.com>  Wed, 17 Oct 2012 11:50:43 +0900
-
-bluetooth-firmware-bcm (0.1.3) unstable; urgency=low
-
-  * rename bt-firmware-43xx to bluetooth-firmware-bcm
-
- -- Jaekyun Lee <jkyun.lee@samsung.com>  Sat, 11 Aug 2012 14:26:05 +0900
-
-bt-firmware-43xx (0.1.2) unstable; urgency=low
-
-  * Fix set bd bug as TAPI IMEI API deprecated
-
- -- Jaekyun Lee <jkyun.lee@samsung.com>  Mon, 26 Mar 2012 15:13:31 +0900
-
-bt-firmware-43xx (0.1.1) unstable; urgency=low
-
-  * common script moved to bluetooth-tools
-
- -- Jaekyun Lee <jkyun.lee@samsung.com>  Fri, 23 Mar 2012 11:29:47 +0900
-
-bt-firmware-43xx (0.1.0) unstable; urgency=low
-
-  * Initail Release
-
- -- DoHyun Pyun <dh79.pyun@samsung.com>  Tue, 14 Feb 2012 15:13:03 +0900
diff --git a/mobile/debian/compat b/mobile/debian/compat
deleted file mode 100644
index 7ed6ff8..0000000
--- a/mobile/debian/compat
+++ /dev/null
@@ -1 +0,0 @@
-5
diff --git a/mobile/debian/control b/mobile/debian/control
deleted file mode 100644
index 91d830a..0000000
--- a/mobile/debian/control
+++ /dev/null
@@ -1,25 +0,0 @@
-Source: bluetooth-firmware-bcm
-Section: devel
-Priority: optional
-Maintainer: DoHyun Pyun <dh79.pyun@samsung.com>, ChanYeol Park <chanyeol.park@samsung.com>, Girish A J <girish.joshi@samsung.com>, InJun Yang <injun.yang@samsung.com>, Jaekyun Lee <jkyun.lee@samsung.com>
-Uploaders: Sunil Behera <sunil.behera@samsung.com>, Syam Sidhardhan <s.syam@samsung.com>
-Build-Depends: debhelper (>= 5), libglib2.0-dev, libvconf-dev
-Standards-Version: 3.7.2
-Homepage: N/A
-
-Package: bluetooth-firmware-bcm
-Architecture: any
-Section: utils
-Depends: ${shlibs:Depends}, ${misc:Depends}, bluetooth-tools
-Description: firmware and tools
- firmware and tools
-
-Package: bluetooth-firmware-bcm-dbg
-Section: debug
-Architecture: any
-Depends: ${shlibs:Depends}, ${misc:Depends}, bluetooth-firmware-bcm (= ${Source-Version})
-Description: Tools for bluetooth-firmware-bcm (unstripped)
- The package contains detached debugging symbols for the binary packages
- produced by the bt-firmware-43xx soruce.
-
-
diff --git a/mobile/debian/rules b/mobile/debian/rules
deleted file mode 100755
index 531d1a1..0000000
--- a/mobile/debian/rules
+++ /dev/null
@@ -1,112 +0,0 @@
-#!/usr/bin/make -f
-
-# Uncomment this to turn on verbose mode.
-#export DH_VERBOSE=1
-
-CFLAGS ?= -Wall -g
-LDFLAGS ?=
-PREFIX ?= /usr
-DATADIR ?= /opt
-PLUGIN_PREFIX ?= /usr
-
-CMAKE_BUILD_DIR ?= $(CURDIR)/cmake_build_tmp
-
-ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS)))
-	CFLAGS += -O0
-else
-	CFLAGS += -O2
-endif
-
-LDFLAGS += -Wl,--rpath=$(PREFIX)/lib -Wl,--as-needed -Wl,--unresolved-symbols=ignore-in-shared-libs
-
-configure: configure-stamp
-configure-stamp:
-	dh_testdir
-	# Add here commands to configure the package.
-	mkdir -p $(CMAKE_BUILD_DIR) && \
-	cd $(CMAKE_BUILD_DIR) && \
-	CFLAGS="$(CFLAGS) -fpie" LDFLAGS="$(LDFLAGS) -pie" \
-	cmake .. -DCMAKE_INSTALL_PREFIX=$(PREFIX) -DPLUGIN_INSTALL_PREFIX=$(PLUGIN_PREFIX)
-
-	touch configure-stamp
-
-build: build-stamp
-
-build-stamp: configure-stamp
-	dh_testdir
-
-	# Add here commands to compile the package.
-	cd $(CMAKE_BUILD_DIR) && $(MAKE)
-
-	for f in `find $(CURDIR)/debian/ -name "*.in"`; do \
-		cat $$f > $${f%.in}; \
-		sed -i -e "s#@PREFIX@#$(PREFIX)#g" $${f%.in}; \
-		sed -i -e "s#@DATADIR@#$(DATADIR)#g" $${f%.in}; \
-		sed -i -e "s#@PLUGIN_PREFIX@#$(PLUGIN_PREFIX)#g" $${f%.in}; \
-	done
-
-	touch $@
-
-clean:
-	dh_testdir
-	dh_testroot
-	rm -f build-stamp configure-stamp
-
-	# Add here commands to clean up after the build process.
-	-rm -rf $(CMAKE_BUILD_DIR)
-	for f in `find $(CURDIR)/debian/ -name "*.in"`; do \
-		rm -f $${f%.in}; \
-	done
-
-	dh_clean
-
-install: build
-	dh_testdir
-	dh_testroot
-	dh_clean -k
-	dh_installdirs
-
-	# Add here commands to install the package into debian/wavplayer.
-	cd $(CMAKE_BUILD_DIR) && $(MAKE) DESTDIR=$(CURDIR)/debian/tmp install
-
-
-
-	# Booting script
-
-# Build architecture-independent files here.
-binary-indep: build install
-# We have nothing to do by default.
-
-# Build architecture-dependent files here.
-binary-arch: build install
-	dh_testdir
-	dh_testroot
-	dh_installchangelogs
-	dh_installdocs
-	dh_installexamples
-	dh_install --sourcedir=debian/tmp
-#	dh_installmenu
-#	dh_installdebconf
-#	dh_installlogrotate
-#	dh_installemacsen
-#	dh_installpam
-#	dh_installmime
-#	dh_python
-#	dh_installinit
-#	dh_installcron
-#	dh_installinfo
-	dh_installman
-	dh_link
-	dh_strip --dbg-package=bluetooth-firmware-bcm-dbg
-	dh_compress
-	dh_fixperms
-#	dh_perl
-	dh_makeshlibs
-	dh_installdeb
-	dh_shlibdeps
-	dh_gencontrol
-	dh_md5sums
-	dh_builddeb
-
-binary: binary-indep binary-arch
-.PHONY: build clean binary-indep binary-arch binary install configure
diff --git a/mobile/firmware/CMakeLists.txt b/mobile/firmware/CMakeLists.txt
deleted file mode 100755
index 750e004..0000000
--- a/mobile/firmware/CMakeLists.txt
+++ /dev/null
@@ -1,3 +0,0 @@
-# install firmware
-INSTALL(FILES ${CMAKE_CURRENT_SOURCE_DIR}/BCM4330B1_002.001.003.0221.0265.hcd DESTINATION ${PLUGIN_INSTALL_PREFIX}/etc/bluetooth)
-INSTALL(FILES ${CMAKE_CURRENT_SOURCE_DIR}/BCM4334B0_002.001.013.0079.0081.hcd DESTINATION ${PLUGIN_INSTALL_PREFIX}/etc/bluetooth)
diff --git a/mobile/scripts/CMakeLists.txt b/mobile/scripts/CMakeLists.txt
deleted file mode 100755
index c432239..0000000
--- a/mobile/scripts/CMakeLists.txt
+++ /dev/null
@@ -1,5 +0,0 @@
-# install firmware
-INSTALL(PROGRAMS ${CMAKE_CURRENT_SOURCE_DIR}/bt-dev-end.sh DESTINATION ${PLUGIN_INSTALL_PREFIX}/etc/bluetooth)
-INSTALL(PROGRAMS ${CMAKE_CURRENT_SOURCE_DIR}/bt-dev-start-c210.sh DESTINATION ${PLUGIN_INSTALL_PREFIX}/etc/bluetooth)
-INSTALL(PROGRAMS ${CMAKE_CURRENT_SOURCE_DIR}/bt-dev-start-e4412.sh DESTINATION ${PLUGIN_INSTALL_PREFIX}/etc/bluetooth)
-INSTALL(PROGRAMS ${CMAKE_CURRENT_SOURCE_DIR}/bt-set-addr.sh DESTINATION ${PLUGIN_INSTALL_PREFIX}/etc/bluetooth)
diff --git a/mobile/scripts/bt-dev-end.sh b/mobile/scripts/bt-dev-end.sh
deleted file mode 100755
index cb57537..0000000
--- a/mobile/scripts/bt-dev-end.sh
+++ /dev/null
@@ -1,32 +0,0 @@
-#!/bin/sh
-
-#
-# Script for stopping Broadcom UART Bluetooth stack
-#
-
-# Device down
-/usr/sbin/hciconfig hci0 down
-
-# OMAP4
-REVISION_NUM=`grep Revision /proc/cpuinfo | awk "{print \\$3}"`
-if [ $REVISION_NUM == "0006" ]; then
-	rmmod bt_drv.ko
-	rmmod st_drv.ko
-	sleep 1
-	killall uim_rfkill
-	exit 0
-fi
-
-# Turn off Bluetooth Chip
-rfkill block bluetooth
-
-killall hciattach
-
-#if [ -e /sys/class/gpio/gpio17/value ]
-#then
-#	# Reset BT chip
-#	echo 0 > /sys/class/gpio/gpio17/value
-#	sleep 0.1
-#	echo 1 > /sys/class/gpio/gpio17/value
-#fi
-
diff --git a/mobile/tools/CMakeLists.txt b/mobile/tools/CMakeLists.txt
deleted file mode 100644
index 85e215b..0000000
--- a/mobile/tools/CMakeLists.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-CMAKE_MINIMUM_REQUIRED(VERSION 2.6)
-PROJECT(bcmtool C)
-
-SET(SRCS_4330B1 bcmtool_4330b1.c)
-
-SET(BCMTOOL_4330B1 ${PROJECT_NAME}_4330b1)
-
-SET(PREFIX ${CMAKE_INSTALL_PREFIX})
-
-FIND_PROGRAM(UNAME NAMES uname)
-EXEC_PROGRAM("${UNAME}" ARGS "-m" OUTPUT_VARIABLE "ARCH")
-IF("${ARCH}" STREQUAL "arm")
-	ADD_DEFINITIONS("-DTARGET")
-	MESSAGE("add -DTARGET")
-ENDIF("${ARCH}" STREQUAL "arm")
-
-ADD_DEFINITIONS("-DPREFIX=\"${CMAKE_INSTALL_PREFIX}\"")
-ADD_DEFINITIONS("-DFACTORYFS=\"$ENV{FACTORYFS}\"")
-
-ADD_EXECUTABLE(${BCMTOOL_4330B1} ${SRCS_4330B1})
-
-TARGET_LINK_LIBRARIES(${BCMTOOL_4330B1} ${package_LDFLAGS})
-
-# install binary file
-INSTALL(TARGETS ${BCMTOOL_4330B1} DESTINATION ${PLUGIN_INSTALL_PREFIX}/bin)
diff --git a/packaging/bluetooth-firmware-bcm.spec b/packaging/bluetooth-firmware-bcm.spec
index 4b63565..53f8e42 100644
--- a/packaging/bluetooth-firmware-bcm.spec
+++ b/packaging/bluetooth-firmware-bcm.spec
@@ -26,14 +26,12 @@ Group:      TO_BE/FILLED
 %description e4412
 e4412 firmware and tools for bluetooth
 
-%if %{_repository}=="wearable"
 %package msm8974
 Summary:    msm8974 firmware and tools for bluetooth
 Group:      TO_BE/FILLED
 
 %description msm8974
 firmware and tools for bluetooth for redwood msm8974
-%endif
 
 %prep
 %setup -q -n bluetooth-firmware-bcm-%{version}
@@ -42,38 +40,29 @@ firmware and tools for bluetooth for redwood msm8974
 export CFLAGS+=" -fpie -fvisibility=hidden"
 export LDFLAGS+=" -Wl,--rpath=/usr/lib -Wl,--as-needed -Wl,--unresolved-symbols=ignore-in-shared-libs -pie"
 
-%if %{_repository}=="wearable"
-cd wearable
-%elseif %{_repository}=="mobile"
-cd mobile
+%if "%{?tizen_profile_name}" == "wearable"
+export CFLAGS="$CFLAGS -DTIZEN_WEARABLE"
+%endif
+
+%cmake \
+%if "%{?tizen_profile_name}" == "wearable"
+        -DTIZEN_WEARABLE=YES \
+%elseif "%{?tizen_profile_name}" == "mobile"
+        -DTIZEN_WEARABLE=NO \
 %endif
 
+MAJORVER=`echo %{version} | awk 'BEGIN {FS="."}{print $1}'`
 cmake ./ -DCMAKE_INSTALL_PREFIX=%{_prefix} -DPLUGIN_INSTALL_PREFIX=%{_prefix}
 make %{?jobs:-j%jobs}
 
 %install
 rm -rf %{buildroot}
 
-%if %{_repository}=="wearable"
-cd wearable
-%elseif %{_repository}=="mobile"
-cd mobile
-%endif
-
 %make_install
 
-%if %{_repository}=="wearable"
-install -D -m 0644 LICENSE.APLv2 %{buildroot}%{_datadir}/license/bluetooth-firmware-bcm-c210
-install -D -m 0644 LICENSE.APLv2 %{buildroot}%{_datadir}/license/bluetooth-firmware-bcm-e4412
-install -D -m 0644 LICENSE.APLv2 %{buildroot}%{_datadir}/license/bluetooth-firmware-bcm-msm8974
-install -D -m 0644 LICENSE.Broadcom %{buildroot}%{_datadir}/license/bluetooth-firmware-bcm-c210
-install -D -m 0644 LICENSE.Broadcom %{buildroot}%{_datadir}/license/bluetooth-firmware-bcm-e4412
-install -D -m 0644 LICENSE.Broadcom %{buildroot}%{_datadir}/license/bluetooth-firmware-bcm-msm8974
-%elseif %{_repository}=="mobile"
 mkdir -p %{buildroot}/usr/share/license
 cp LICENSE.APLv2 %{buildroot}/usr/share/license/%{name}
-cat %{_builddir}/%{name}-%{version}/%{_repository}/LICENSE.Broadcom >> %{buildroot}/usr/share/license/%{name}
-%endif
+cat %{_builddir}/%{name}-%{version}/LICENSE.Broadcom >> %{buildroot}/usr/share/license/%{name}
 
 %post c210
 rm -rf %{_prefix}/etc/bluetooth/bt-dev-start.sh
@@ -83,54 +72,46 @@ ln -s %{_prefix}/etc/bluetooth/bt-dev-start-c210.sh %{_prefix}/etc/bluetooth/bt-
 rm -rf %{_prefix}/etc/bluetooth/bt-dev-start.sh
 ln -s %{_prefix}/etc/bluetooth/bt-dev-start-e4412.sh %{_prefix}/etc/bluetooth/bt-dev-start.sh
 
-%if %{_repository}=="wearable"
 %post msm8974
 rm -rf %{_prefix}/etc/bluetooth/bt-dev-start.sh
 ln -s %{_prefix}/etc/bluetooth/bt-dev-start-msm8974.sh %{_prefix}/etc/bluetooth/bt-dev-start.sh
-%endif
 
 %files c210
-%manifest %{_repository}/bluetooth-firmware-bcm.manifest
+%manifest bluetooth-firmware-bcm.manifest
 %defattr(-,root,root,-)
 %{_bindir}/bcmtool_4330b1
 %{_bindir}/setbd
-%if %{_repository}=="wearable"
-%{_prefix}/etc/bluetooth/BCM4330B1_002.001.003.0013.0000_SS-SLP7-B42_NoExtLNA_37_4MHz-TEST-ONLY.hcd
-%endif
 %{_prefix}/etc/bluetooth/BCM4330B1_002.001.003.0221.0265.hcd
 %attr(755,-,-) %{_prefix}/etc/bluetooth/bt-dev-end.sh
 %attr(755,-,-) %{_prefix}/etc/bluetooth/bt-dev-start-c210.sh
 %attr(755,-,-) %{_prefix}/etc/bluetooth/bt-set-addr.sh
-%if %{_repository}=="wearable"
-%{_datadir}/license/bluetooth-firmware-bcm-c210
-%elseif %{_repository}=="mobile"
 /usr/share/license/%{name}
-%endif
 
 %files e4412
-%manifest %{_repository}/bluetooth-firmware-bcm.manifest
+%manifest bluetooth-firmware-bcm.manifest
 %defattr(-,root,root,-)
 %{_bindir}/bcmtool_4330b1
 %{_bindir}/setbd
-%if %{_repository}=="wearable"
+%if "%{?tizen_profile_name}" == "wearable"
 %{_prefix}/etc/bluetooth/BCM20710A1_001.002.014.0059.0060.hcd
 %{_prefix}/etc/bluetooth/BCM4334B0_002.001.013.1675.1676_B2_ORC.hcd
-#%{_prefix}/etc/bluetooth/BCM4334W_001.002.003.0874.0000_Samsung_Rinato_TEST_ONLY.hcd
-#%{_prefix}/etc/bluetooth/BCM43342A1_001.002.003.0874.0000_SEMCO_B58_TEST_ONLY.hcd
 %{_prefix}/etc/bluetooth/BCM4334W_Rinato_TestOnly.hcd
 %{_prefix}/etc/bluetooth/BCM4334W_001.002.003.0997.1027_B58_ePA.hcd
-%{_datadir}/license/bluetooth-firmware-bcm-e4412
-%elseif %{_repository}=="mobile"
+%exclude %{_prefix}/etc/bluetooth/BCM4334B0_002.001.013.0079.0081.hcd
+%else
 %{_prefix}/etc/bluetooth/BCM4334B0_002.001.013.0079.0081.hcd
-/usr/share/license/%{name}
+%exclude %{_prefix}/etc/bluetooth/BCM20710A1_001.002.014.0059.0060.hcd
+%exclude %{_prefix}/etc/bluetooth/BCM4334B0_002.001.013.1675.1676_B2_ORC.hcd
+%exclude %{_prefix}/etc/bluetooth/BCM4334W_Rinato_TestOnly.hcd
+%exclude %{_prefix}/etc/bluetooth/BCM4334W_001.002.003.0997.1027_B58_ePA.hcd
 %endif
+/usr/share/license/%{name}
 %attr(755,-,-) %{_prefix}/etc/bluetooth/bt-dev-end.sh
 %attr(755,-,-) %{_prefix}/etc/bluetooth/bt-dev-start-e4412.sh
 %attr(755,-,-) %{_prefix}/etc/bluetooth/bt-set-addr.sh
 
-%if %{_repository}=="wearable"
 %files msm8974
-%manifest %{_repository}/bluetooth-firmware-bcm.manifest
+%manifest bluetooth-firmware-bcm.manifest
 %defattr(-,root,root,-)
 %{_bindir}/bcmtool_4330b1
 %{_bindir}/setbd
@@ -139,5 +120,4 @@ ln -s %{_prefix}/etc/bluetooth/bt-dev-start-msm8974.sh %{_prefix}/etc/bluetooth/
 %attr(755,-,-) %{_prefix}/etc/bluetooth/bt-dev-end.sh
 %attr(755,-,-) %{_prefix}/etc/bluetooth/bt-dev-start-msm8974.sh
 %attr(755,-,-) %{_prefix}/etc/bluetooth/bt-set-addr.sh
-%{_datadir}/license/bluetooth-firmware-bcm-msm8974
-%endif
+/usr/share/license/%{name}
diff --git a/wearable/scripts/CMakeLists.txt b/scripts/CMakeLists.txt
index 6837b9c..bc22cac 100644
--- a/wearable/scripts/CMakeLists.txt
+++ b/scripts/CMakeLists.txt
@@ -1,6 +1,10 @@
 # install firmware
 INSTALL(PROGRAMS ${CMAKE_CURRENT_SOURCE_DIR}/bt-dev-end.sh DESTINATION ${PLUGIN_INSTALL_PREFIX}/etc/bluetooth)
 INSTALL(PROGRAMS ${CMAKE_CURRENT_SOURCE_DIR}/bt-dev-start-c210.sh DESTINATION ${PLUGIN_INSTALL_PREFIX}/etc/bluetooth)
-INSTALL(PROGRAMS ${CMAKE_CURRENT_SOURCE_DIR}/bt-dev-start-e4412.sh DESTINATION ${PLUGIN_INSTALL_PREFIX}/etc/bluetooth)
+IF (TIZEN_WEARABLE)
+INSTALL(PROGRAMS ${CMAKE_CURRENT_SOURCE_DIR}/wearable/bt-dev-start-e4412.sh DESTINATION ${PLUGIN_INSTALL_PREFIX}/etc/bluetooth)
+ELSE ()
+INSTALL(PROGRAMS ${CMAKE_CURRENT_SOURCE_DIR}/mobile/bt-dev-start-e4412.sh DESTINATION ${PLUGIN_INSTALL_PREFIX}/etc/bluetooth)
+ENDIF (TIZEN_WEARABLE)
 INSTALL(PROGRAMS ${CMAKE_CURRENT_SOURCE_DIR}/bt-dev-start-msm8974.sh DESTINATION ${PLUGIN_INSTALL_PREFIX}/etc/bluetooth)
 INSTALL(PROGRAMS ${CMAKE_CURRENT_SOURCE_DIR}/bt-set-addr.sh DESTINATION ${PLUGIN_INSTALL_PREFIX}/etc/bluetooth)
diff --git a/wearable/scripts/bt-dev-end.sh b/scripts/bt-dev-end.sh
index 8390a35..18af5a8 100755
--- a/wearable/scripts/bt-dev-end.sh
+++ b/scripts/bt-dev-end.sh
@@ -5,7 +5,7 @@
 #
 
 # Device down
-/usr/sbin/hciconfig hci0 down
+/usr/bin/hciconfig hci0 down
 
 # Turn off Bluetooth Chip
 rfkill block bluetooth
diff --git a/mobile/scripts/bt-dev-start-c210.sh b/scripts/bt-dev-start-c210.sh
index 1be1b62..1e223de 100755
--- a/mobile/scripts/bt-dev-start-c210.sh
+++ b/scripts/bt-dev-start-c210.sh
@@ -36,9 +36,9 @@ fi
 rfkill unblock bluetooth
 
 echo "Check for Bluetooth device status"
-if (/usr/sbin/hciconfig | grep hci); then
+if (/usr/bin/hciconfig | grep hci); then
 	echo "Bluetooth device is UP"
-	/usr/sbin/hciconfig hci0 up
+	/usr/bin/hciconfig hci0 up
 else
 	echo "Bluetooth device is DOWN"
 	echo "Registering Bluetooth device"
@@ -71,10 +71,10 @@ else
 	done
 
 	# Attaching Broadcom device
-	if (/usr/sbin/hciattach $BT_UART_DEVICE -s $UART_SPEED $BT_CHIP_TYPE $UART_SPEED flow); then
+	if (/usr/bin/hciattach $BT_UART_DEVICE -s $UART_SPEED $BT_CHIP_TYPE $UART_SPEED flow); then
 		sleep 0.1
-                /usr/sbin/hciconfig hci0 name $BT_PLATFORM_DEFAULT_HCI_NAME
-                /usr/sbin/hciconfig hci0 sspmode 1
+                /usr/bin/hciconfig hci0 name $BT_PLATFORM_DEFAULT_HCI_NAME
+                /usr/bin/hciconfig hci0 sspmode 1
 		echo "HCIATTACH success"
 	else
 		echo "HCIATTACH failed"
diff --git a/wearable/scripts/bt-dev-start-msm8974.sh b/scripts/bt-dev-start-msm8974.sh
index 253b84d..6b39bad 100755
--- a/wearable/scripts/bt-dev-start-msm8974.sh
+++ b/scripts/bt-dev-start-msm8974.sh
@@ -42,9 +42,9 @@ fi
 rfkill unblock bluetooth
 
 echo "Check for Bluetooth device status"
-if (/usr/sbin/hciconfig | grep hci); then
+if (/usr/bin/hciconfig | grep hci); then
 	echo "Bluetooth device is UP"
-	/usr/sbin/hciconfig hci0 up
+	/usr/bin/hciconfig hci0 up
 else
 	echo "Bluetooth device is DOWN"
 	echo "Registering Bluetooth device"
@@ -52,7 +52,7 @@ else
 	$BCM_TOOL $BT_UART_DEVICE -DEBUG -CSTOPB -FILE=/usr/etc/bluetooth/$BCM_FIRMWARE -BAUD=$UART_SPEED -ADDR=$BT_ADDR -SETSCO=0,0,0,0,0,0,0,3,3,0 -LP
 
 	# Attaching Broadcom device
-	if (/usr/sbin/hciattach $BT_UART_DEVICE -s $UART_SPEED $BT_CHIP_TYPE $UART_SPEED flow); then
+	if (/usr/bin/hciattach $BT_UART_DEVICE -s $UART_SPEED $BT_CHIP_TYPE $UART_SPEED flow); then
 		sleep 0.1
 		echo "HCIATTACH success"
 	else
@@ -62,5 +62,5 @@ else
 	fi
 fi
 
-#/usr/sbin/hciconfig hci0 down
+#/usr/bin/hciconfig hci0 down
 
diff --git a/mobile/scripts/bt-set-addr.sh b/scripts/bt-set-addr.sh
index a2624a0..a2624a0 100755
--- a/mobile/scripts/bt-set-addr.sh
+++ b/scripts/bt-set-addr.sh
diff --git a/mobile/scripts/bt-dev-start-e4412.sh b/scripts/mobile/bt-dev-start-e4412.sh
index 3a9e663..cc2a2a3 100755
--- a/mobile/scripts/bt-dev-start-e4412.sh
+++ b/scripts/mobile/bt-dev-start-e4412.sh
@@ -32,22 +32,27 @@ fi
 /usr/bin/setbd
 
 #if the setbd return non 0, which means incorrect bd address file, then exit
-if [ $? -ne 0 ]
+if [ ! -e "$BT_ADDR" ]
 then
-	exit 1
+	BT_ADDR=/opt/var/lib/bluetooth/.bd_addr
+	if [ ! -e "$BT_ADDR" ]
+	then
+		exit 1
+	fi
 fi
 
 rfkill unblock bluetooth
 
 echo "Check for Bluetooth device status"
-if (/usr/sbin/hciconfig | grep hci); then
+if (/usr/bin/hciconfig | grep hci); then
 	echo "Bluetooth device is UP"
-	/usr/sbin/hciconfig hci0 up
+	/usr/bin/hciconfig hci0 up
 else
 	echo "Bluetooth device is DOWN"
 	echo "Registering Bluetooth device"
 
-	$BCM_TOOL $BT_UART_DEVICE -FILE=/usr/etc/bluetooth/$BCM_FIRMWARE -BAUD=$UART_SPEED -ADDR=$BT_ADDR -SETSCO=0,0,0,0,0,0,0,3,3,0 -LP > /dev/null 2>&1 &
+	#$BCM_TOOL $BT_UART_DEVICE -FILE=/usr/etc/bluetooth/$BCM_FIRMWARE -BAUD=$UART_SPEED -ADDR=$BT_ADDR -SETSCO=0,0,0,0,0,0,0,3,3,0 -LP > /dev/null 2>&1 &
+	$BCM_TOOL $BT_UART_DEVICE -FILE=/usr/etc/bluetooth/$BCM_FIRMWARE -BAUD=$UART_SPEED -ADDR=$BT_ADDR -SETSCO=0,0,0,0,0,0,0,3,3,0 > /dev/null 2>&1 &
 	bcmtool_pid=$!
 	#Check next 5 seconds for bcmtool success
 	for (( i=1; i<=50; i++))
@@ -76,10 +81,10 @@ else
 	done
 
 	# Attaching Broadcom device
-	if (/usr/sbin/hciattach $BT_UART_DEVICE -s $UART_SPEED $BT_CHIP_TYPE $UART_SPEED flow); then
+	if (/usr/bin/hciattach $BT_UART_DEVICE -s $UART_SPEED $BT_CHIP_TYPE $UART_SPEED flow); then
 		sleep 0.1
-		/usr/sbin/hciconfig hci0 name $BT_PLATFORM_DEFAULT_HCI_NAME
-		/usr/sbin/hciconfig hci0 sspmode 1
+		/usr/bin/hciconfig hci0 name $BT_PLATFORM_DEFAULT_HCI_NAME
+		/usr/bin/hciconfig hci0 sspmode 1
 		echo "HCIATTACH success"
 	else
 		echo "HCIATTACH failed"
@@ -88,5 +93,5 @@ else
 	fi
 fi
 
-#/usr/sbin/hciconfig hci0 down
+#/usr/bin/hciconfig hci0 down
 
diff --git a/wearable/scripts/bt-dev-start-e4412.sh b/scripts/wearable/bt-dev-start-e4412.sh
index 5c4e596..a7af98b 100755
--- a/wearable/scripts/bt-dev-start-e4412.sh
+++ b/scripts/wearable/bt-dev-start-e4412.sh
@@ -56,9 +56,9 @@ fi
 rfkill unblock bluetooth
 
 echo "Check for Bluetooth device status"
-if (/usr/sbin/hciconfig | grep hci); then
+if (/usr/bin/hciconfig | grep hci); then
 	echo "Bluetooth device is UP"
-	/usr/sbin/hciconfig hci0 up
+	/usr/bin/hciconfig hci0 up
 else
 	echo "Bluetooth device is DOWN"
 	echo "Registering Bluetooth device"
@@ -121,7 +121,7 @@ else
 	echo "Try for hciattach"
 
 	# Attaching Broadcom device
-	if (/usr/sbin/hciattach $BT_UART_DEVICE -s $UART_SPEED $BT_CHIP_TYPE $UART_SPEED flow); then
+	if (/usr/bin/hciattach $BT_UART_DEVICE -s $UART_SPEED $BT_CHIP_TYPE $UART_SPEED flow); then
 		sleep 0.1
 		echo "HCIATTACH success"
 	else
@@ -131,5 +131,5 @@ else
 	fi
 fi
 
-#/usr/sbin/hciconfig hci0 down
+#/usr/bin/hciconfig hci0 down
 
diff --git a/mobile/set-address/CMakeLists.txt b/set-address/CMakeLists.txt
index c3e04db..c3e04db 100644
--- a/mobile/set-address/CMakeLists.txt
+++ b/set-address/CMakeLists.txt
diff --git a/mobile/set-address/setbd.c b/set-address/setbd.c
index fbcfff1..6bf2ca2 100644
--- a/mobile/set-address/setbd.c
+++ b/set-address/setbd.c
@@ -29,7 +29,10 @@
 #include <sys/stat.h>
 
 #define	BD_ADDR_PATH	"/csa/bluetooth"
+#define	BD_ADDR_TEMP_PATH	"/opt/var/lib/bluetooth"
+
 #define	BD_ADDR_FILE	"/csa/bluetooth/.bd_addr"
+#define	BD_ADDR_TEMP_FILE	"/opt/var/lib/bluetooth/.bd_addr"
 
 #define	BD_ADDR_LEN	14
 #define BD_PREFIX	"0002\n"
@@ -69,38 +72,41 @@ void makeRandomBD(unsigned char *buf)
 	printf("\r\n");
 }
 
-void make_bt_address_folder(void)
+int make_bt_address_folder(char *path)
 {
 	DIR *dp;
 	int err;
 
-	dp = opendir(BD_ADDR_PATH);
+	dp = opendir(path);
 	if (dp == NULL) {
-		if (mkdir(BD_ADDR_PATH, 0755) < 0) {
+		if (mkdir(path, 0755) < 0) {
 			err = -errno;
 			printf("mkdir: %s(%d)", strerror(-err), -err);
+			return -1;
 		}
-		return;
+		return 0;
 	}
 
 	closedir(dp);
+	return 0;
 }
 
-int make_bt_address(void)
+int make_bt_address(char *path, char *file)
 {
 	int fd;
 	unsigned char txt[BD_ADDR_LEN];
 	char nap[4 + 1], uap[2 + 1], lap[6 + 1];
 	int ret;
 
-	make_bt_address_folder();
+	if (make_bt_address_folder(path) < 0)
+			return -1;
 
-	fd = open(BD_ADDR_FILE, O_RDONLY | O_SYNC);
+	fd = open(file, O_RDONLY | O_SYNC);
 
 	if (fd < 0) {
 		printf("File not exist\n");
 
-		fd = open(BD_ADDR_FILE, O_RDWR | O_CREAT | O_TRUNC | O_SYNC,
+		fd = open(file, O_RDWR | O_CREAT | O_TRUNC | O_SYNC,
 			  0644);
 
 		if (fd < 0) {
@@ -114,13 +120,13 @@ int make_bt_address(void)
 		if (ret != BD_ADDR_LEN) {
 			printf("Unable to write device address\n");
 			close(fd);
-			unlink(BD_ADDR_FILE);
+			unlink(file);
 			return -1;
 		}
 
 		lseek(fd, 0, SEEK_SET);
 	} else {
-		printf("%s is already existed\n", BD_ADDR_FILE);
+		printf("%s is already existed\n", file);
 	}
 
 	ret = read(fd, nap, 5);
@@ -146,8 +152,8 @@ int make_bt_address(void)
 	 */
 	if (strncmp(nap, "0002", 4) == 0 &&
 	    strncmp(uap, "3f", 2) == 0 && strncmp(lap, "bf0a1a", 6) == 0) {
-		printf("%s has wrong address\n", BD_ADDR_FILE);
-		fd = open(BD_ADDR_FILE, O_RDWR | O_CREAT | O_TRUNC | O_SYNC,
+		printf("%s has wrong address\n", file);
+		fd = open(file, O_RDWR | O_CREAT | O_TRUNC | O_SYNC,
 			  0644);
 
 		if (fd < 0) {
@@ -160,7 +166,7 @@ int make_bt_address(void)
 		if (ret != BD_ADDR_LEN) {
 			printf("Unable to write device address\n");
 			close(fd);
-			unlink(BD_ADDR_FILE);
+			unlink(file);
 			return -1;
 		}
 
@@ -172,15 +178,19 @@ int make_bt_address(void)
  err:
 	printf("read() failed, ret = %d\n", ret);
 	close(fd);
-	unlink(BD_ADDR_FILE);
+	unlink(file);
 	return -1;
 }
 
 int main()
 {
 	printf("Bluetooth Address Setting\n");
-	if (make_bt_address() < 0)
-		return -1;
-
+	if (make_bt_address(BD_ADDR_PATH, BD_ADDR_FILE) < 0) {
+		if (make_bt_address(BD_ADDR_TEMP_PATH, BD_ADDR_TEMP_FILE) < 0) {
+			return -1;
+		} else {
+			return 1;
+		}
+	}
 	return 0;
 }
diff --git a/wearable/tools/CMakeLists.txt b/tools/CMakeLists.txt
index 85e215b..d7d10ca 100644
--- a/wearable/tools/CMakeLists.txt
+++ b/tools/CMakeLists.txt
@@ -1,7 +1,11 @@
 CMAKE_MINIMUM_REQUIRED(VERSION 2.6)
 PROJECT(bcmtool C)
 
-SET(SRCS_4330B1 bcmtool_4330b1.c)
+IF (TIZEN_WEARABLE)
+SET(SRCS_4330B1 bcmtool_4330b1_w.c)
+ELSE ()
+SET(SRCS_4330B1 bcmtool_4330b1_m.c)
+ENDIF (TIZEN_WEARABLE)
 
 SET(BCMTOOL_4330B1 ${PROJECT_NAME}_4330b1)
 
diff --git a/wearable/tools/bcmtool.c b/tools/bcmtool.c
index 544a356..544a356 100644
--- a/wearable/tools/bcmtool.c
+++ b/tools/bcmtool.c
diff --git a/mobile/tools/bcmtool_4330b1.c b/tools/bcmtool_4330b1_m.c
index 6917634..b456dc9 100644
--- a/mobile/tools/bcmtool_4330b1.c
+++ b/tools/bcmtool_4330b1_m.c
@@ -511,7 +511,7 @@ UINT8 DownloadPatchram(char *patchram1)
 	ChangeBaudRate(921600);
 #endif
 
-	strcpy(prm, patchram1);
+	strncpy(prm, patchram1, 127);
 
 	fprintf(stderr, "Download Start\n");
 
diff --git a/wearable/tools/bcmtool_4330b1.c b/tools/bcmtool_4330b1_w.c
index 65f7583..1e4c84c 100644
--- a/wearable/tools/bcmtool_4330b1.c
+++ b/tools/bcmtool_4330b1_w.c
@@ -1,11 +1,23 @@
-/*****************************************************************************
-**                                                                           
-**  Name:          bcmtool.c
-**
-**  Description:   Download a patchram files for the HCD format
-**
-**  Copyright (c) 2000-2009, Broadcom Corp., All Rights Reserved.
-******************************************************************************/
+/*
+ * Name: bcmtool_4330b1.c
+ *
+ * Description: Download a patchram files for the HCD format
+ *
+ * Copyright (c) 2012-2013, Broadcom Corp., All Rights Reserved.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *              http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ */
 
 #include <stdio.h>
 #include <errno.h>
@@ -498,7 +510,7 @@ UINT8 DownloadPatchram(char *patchram1)
 	ChangeBaudRate(3000000);
 #endif
 
-	strcpy(prm, patchram1);
+	strncpy(prm, patchram1, 127);
 
 	fprintf(stderr, "Download Start\n");
 
diff --git a/wearable/AUTHORS b/wearable/AUTHORS
deleted file mode 100644
index 1a599df..0000000
--- a/wearable/AUTHORS
+++ /dev/null
@@ -1,4 +0,0 @@
-Hocheol Seo <hocheol.seo@samsung.com>
-Girish Ashok Joshi <girish.joshi@samsung.com>
-Chanyeol Park <chanyeol.park@samsung.com>
-DoHyun Pyun <dh79.pyun@samsung.com>
diff --git a/wearable/CMakeLists.txt b/wearable/CMakeLists.txt
deleted file mode 100644
index 94e9747..0000000
--- a/wearable/CMakeLists.txt
+++ /dev/null
@@ -1,12 +0,0 @@
-CMAKE_MINIMUM_REQUIRED(VERSION 2.6)
-
-FOREACH(flag ${package_CFLAGS})
-	SET(EXTRA_CFLAGS "${EXTRA_CFLAGS} ${flag}")
-ENDFOREACH(flag)
-
-SET(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} ${EXTRA_CFLAGS}")
-
-ADD_SUBDIRECTORY(set-address)
-ADD_SUBDIRECTORY(tools)
-ADD_SUBDIRECTORY(firmware)
-ADD_SUBDIRECTORY(scripts)
diff --git a/wearable/LICENSE.Broadcom b/wearable/LICENSE.Broadcom
deleted file mode 100644
index acf4e62..0000000
--- a/wearable/LICENSE.Broadcom
+++ /dev/null
@@ -1,64 +0,0 @@
-SOFTWARE LICENSE AGREEMENT
-
-The accompanying software in binary code form ("Software"), is licensed to you,
-or, if you are accepting on behalf of an entity, the entity and its affiliates
-exercising rights hereunder ("Licensee") subject to the terms of this software
-license agreement ("Agreement"), unless Licensee and Broadcom Corporation
-("Broadcom") execute a separate written software license agreement governing
-use of the Software. ANY USE, REPRODUCTION, OR DISTRIBUTION OF THE SOFTWARE
-CONSTITUTES LICENSEE'S ACCEPTANCE OF THIS AGREEMENT.
-
-1.	License. Subject to the terms and conditions of this Agreement,
-Broadcom hereby grants to Licensee a limited, non-exclusive, non-transferable,
-royalty-free license: (i) to use and integrate the Software with any other
-software; and (ii) to reproduce and distribute the Software complete,
-unmodified, and as provided by Broadcom, solely for use with Broadcom
-proprietary integrated circuit product(s) sold by Broadcom with which the
-Software was designed to be used, or their successors.
-
-2.	Restrictions. Licensee shall distribute Software with a copy of this
-Agreement. Licensee shall not remove, efface or obscure any copyright or
-trademark notices from the Software. Reproductions of the Broadcom copyright
-notice shall be included with each copy of the Software, except where such
-Software is embedded in a manner not readily accessible to the end user.
-Licensee shall not: (i) use, license, sell or otherwise distribute the Software
-except as provided in this Agreement; (ii) attempt to modify in any way,
-reverse engineer, decompile or disassemble any portion of the Software; or
-(iii) use the Software or other material in violation of any applicable law or
-regulation, including but not limited to any regulatory agency. This Agreement
-shall automatically terminate upon Licensee’s failure to comply with any of the
-terms of this Agreement. In such event, Licensee will destroy all copies of the
-Software and its component parts.
-
-3.	Ownership. The Software is licensed and not sold.  Title to and
-ownership of the Software, including all intellectual property rights thereto,
-and any portion thereof remain with Broadcom or its licensors. Licensee hereby
-covenants that it will not assert any claim that the Software created by or for
-Broadcom infringe any intellectual property right owned or controlled by
-Licensee.
-
-4.	Disclaimer. THE SOFTWARE IS OFFERED "AS IS," AND BROADCOM PROVIDES AND
-GRANTS AND LICENSEE RECEIVES NO SUPPORT AND NO WARRANTIES OF ANY KIND, EXPRESS
-OR IMPLIED, BY STATUTE, COMMUNICATION OR CONDUCT WITH LICENSEE, OR OTHERWISE.
-BROADCOM SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A SPECIFIC PURPOSE, OR NONINFRINGEMENT CONCERNING THE SOFTWARE OR
-ANY UPGRADES TO OR DOCUMENTATION FOR THE SOFTWARE. WITHOUT LIMITATION OF THE
-ABOVE, BROADCOM GRANTS NO WARRANTY THAT THE SOFTWARE IS ERROR-FREE OR WILL
-OPERATE WITHOUT INTERRUPTION, AND GRANTS NO WARRANTY REGARDING ITS USE OR THE
-RESULTS THEREFROM INCLUDING, WITHOUT LIMITATION, ITS CORRECTNESS, ACCURACY, OR
-RELIABILITY. TO THE MAXIMUM EXTENT PERMITTED BY LAW, IN NO EVENT SHALL BROADCOM
-OR ANY OF ITS LICENSORS HAVE ANY LIABILITY FOR ANY DIRECT, INDIRECT,
-INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES, HOWEVER CAUSED AND ON ANY THEORY
-OF LIABILITY, WHETHER FOR BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE) OR
-OTHERWISE, ARISING OUT OF THIS AGREEMENT OR USE, REPRODUCTION, OR DISTRIBUTION
-OF THE SOFTWARE, INCLUDING BUT NOT LIMITED TO LOSS OF DATA AND LOSS OF PROFITS,
-EVEN IF SUCH PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THESE
-LIMITATIONS SHALL APPLY NOTWITHSTANDING ANY FAILURE OF ESSENTIAL PURPOSE OF ANY
-LIMITED REMEDY.
-
-5.	Export Laws.  LICENSEE UNDERSTANDS AND AGREES THAT THE SOFTWARE IS
-SUBJECT TO UNITED STATES AND OTHER APPLICABLE EXPORT-RELATED LAWS AND
-REGULATIONS AND THAT LICENSEE MAY NOT EXPORT, RE-EXPORT OR TRANSFER THE
-SOFTWARE OR ANY DIRECT PRODUCT OF THE SOFTWARE EXCEPT AS PERMITTED UNDER THOSE
-LAWS. WITHOUT LIMITING THE FOREGOING, EXPORT, RE-EXPORT, OR TRANSFER OF THE
-SOFTWARE TO CUBA, IRAN, NORTH KOREA, SUDAN, AND SYRIA IS PROHIBITED.
diff --git a/wearable/NOTICE b/wearable/NOTICE
deleted file mode 100644
index 411d0c9..0000000
--- a/wearable/NOTICE
+++ /dev/null
@@ -1,10 +0,0 @@
-Copyright (c) 2012 Samsung Electronics Co., Ltd. All rights reserved.
-Except as noted, this software is licensed under Apache License, Version 2.
-Please, see the LICENSE.APLv2 file for Apache License terms and conditions.
-
-The following files are copyrighted by Broadcom and licensed under
-a separate license. Please, see the LICENSE.Broadcom file for
-license terms and conditions.
-
-Copyright (c) 2012 Broadcom Co., Ltd. All rights reserved.
-- firmware/*.hcd
diff --git a/wearable/bluetooth-firmware-bcm.manifest b/wearable/bluetooth-firmware-bcm.manifest
deleted file mode 100644
index a3dc534..0000000
--- a/wearable/bluetooth-firmware-bcm.manifest
+++ /dev/null
@@ -1,8 +0,0 @@
-<manifest>
-    <define>
-        <domain name="bt_firmware"/>
-    </define>
-    <request>
-        <domain name="bt_firmware"/>
-    </request>
-</manifest>
diff --git a/wearable/debian/bluetooth-firmware-bcm-c210.install b/wearable/debian/bluetooth-firmware-bcm-c210.install
deleted file mode 100644
index 2490361..0000000
--- a/wearable/debian/bluetooth-firmware-bcm-c210.install
+++ /dev/null
@@ -1,3 +0,0 @@
-usr/bin/*
-usr/etc/bluetooth/BCM4330B1_002.001.003.0013.0000_SS-SLP7-B42_NoExtLNA_37_4MHz-TEST-ONLY.hcd
-usr/etc/bluetooth/BCM4330B1_002.001.003.0221.0265.hcd
diff --git a/wearable/debian/bluetooth-firmware-bcm-c210.postinst.in b/wearable/debian/bluetooth-firmware-bcm-c210.postinst.in
deleted file mode 100644
index 93d80e5..0000000
--- a/wearable/debian/bluetooth-firmware-bcm-c210.postinst.in
+++ /dev/null
@@ -1,12 +0,0 @@
-#!/bin/sh
-
-# Change File Permission
-chmod 644 @PREFIX@/etc/bluetooth/BCM4330B1_002.001.003.0013.0000_SS-SLP7-B42_NoExtLNA_37_4MHz-TEST-ONLY.hcd
-chmod 644 @PREFIX@/etc/bluetooth/BCM4330B1_002.001.003.0221.0265.hcd
-
-# root case
-if [ ${USER} = "root" ]
-then
-	chown root:root @PREFIX@/etc/bluetooth/BCM4330B1_002.001.003.0013.0000_SS-SLP7-B42_NoExtLNA_37_4MHz-TEST-ONLY.hcd
-	chown root:root @PREFIX@/etc/bluetooth/BCM4330B1_002.001.003.0221.0265.hcd
-fi
diff --git a/wearable/debian/bluetooth-firmware-bcm-e4412.install b/wearable/debian/bluetooth-firmware-bcm-e4412.install
deleted file mode 100644
index 7bd2b2c..0000000
--- a/wearable/debian/bluetooth-firmware-bcm-e4412.install
+++ /dev/null
@@ -1,3 +0,0 @@
-usr/bin/*
-usr/etc/bluetooth/BCM4334B0_002.001.013.0079.0081.hcd
-usr/etc/bluetooth/BCM4334B0_002.001.013.0079.0084.hcd
diff --git a/wearable/debian/bluetooth-firmware-bcm-e4412.postinst.in b/wearable/debian/bluetooth-firmware-bcm-e4412.postinst.in
deleted file mode 100644
index 6007780..0000000
--- a/wearable/debian/bluetooth-firmware-bcm-e4412.postinst.in
+++ /dev/null
@@ -1,12 +0,0 @@
-#!/bin/sh
-
-# Change File Permission
-chmod 644 @PREFIX@/etc/bluetooth/BCM4334B0_002.001.013.0079.0081.hcd
-chmod 644 @PREFIX@/etc/bluetooth/BCM4334B0_002.001.013.0079.0084.hcd
-
-# root case
-if [ ${USER} = "root" ]
-then
-	chown root:root @PREFIX@/etc/bluetooth/BCM4334B0_002.001.013.0079.0081.hcd
-	chown root:root @PREFIX@/etc/bluetooth/BCM4334B0_002.001.013.0079.0084.hcd
-fi
diff --git a/wearable/debian/changelog b/wearable/debian/changelog
deleted file mode 100644
index 208ef48..0000000
--- a/wearable/debian/changelog
+++ /dev/null
@@ -1,127 +0,0 @@
-bluetooth-firmware-bcm (0.2.38-2) unstable; urgency=low
-
-  * Tagging and upload the package
-  * Git: magnolia/adaptation/devices/bluetooth-firmware-bcm
-  * Tag: bluetooth-firmware-bcm_0.2.38-2
-
- -- Sangki Park <sangki79.park@samsung.com>  Wed, 06 Mar 2013 10:02:22 +0900
-
-bluetooth-firmware-bcm (0.2.38) unstable; urgency=low
-
-  * update SEMCO SWB-B52 module patchram for Redwood45_3G
-  * Git: magnolia/adaptation/devices/bluetooth-firmware-bcm
-  * Tag: bluetooth-firmware-bcm_0.2.38
-
- -- Sangki Park <sangki79.park@samsung.com>  Tue, 05 Mar 2013 11:33:46 +0900
-
-bluetooth-firmware-bcm (0.2.37) unstable; urgency=low
-
-  * update Murata module patchram for Redwood45_LTE_JPN
-  * Git: magnolia/adaptation/devices/bluetooth-firmware-bcm
-  * Tag: bluetooth-firmware-bcm_0.2.37
-
- -- Sangki Park <sangki79.park@samsung.com>  Tue, 26 Feb 2013 10:12:50 +0900
-
-bluetooth-firmware-bcm (0.2.36) unstable; urgency=low
-
-  * Create folder on runtime
-  * Git: magnolia/adaptation/devices/bluetooth-firmware-bcm
-  * Tag: bluetooth-firmware-bcm_0.2.36
-
- -- InJun Yang <injun.yang@samsung.com>  Fri, 22 Feb 2013 12:26:45 +0900
-
-bluetooth-firmware-bcm (0.2.34) unstable; urgency=low
-
-  * Change bd_addr file path
-  * Git: magnolia/adaptation/devices/bluetooth-firmware-bcm
-  * Tag: bluetooth-firmware-bcm_0.2.35 
-
- -- InJun Yang <injun.yang@samsung.com>  Thu, 21 Feb 2013 14:22:31 +0900
-
-bluetooth-firmware-bcm (0.2.33) unstable; urgency=low
-
-  * Apply the visibility hidden option
-  * Git: magnolia/adaptation/devices/bluetooth-firmware-bcm
-  * Tag: bluetooth-firmware-bcm_0.2.33
-
- -- DoHyun Pyun <dh79.pyun@samsung.com>  Tue, 05 Feb 2013 18:54:06 +0900
-
-bluetooth-firmware-bcm (0.2.32) precise; urgency=low
-
-  * Remove link package method
-  * Git: magnolia/adaptation/devices/bluetooth-firmware-bcm
-  * Tag: bluetooth-firmware-bcm_0.2.31
-
- -- Jaekyun Lee <jkyun.lee@samsung.com>  Thu, 10 Jan 2013 15:25:37 +0900
-
-bluetooth-firmware-bcm (0.2.30) unstable; urgency=low
-
-  * Fix power consumption issue after BT off.
-  * Git: magnolia/adaptation/devices/bluetooth-firmware-bcm
-  * Tag: bluetooth-firmware-bcm_0.2.30
-
- -- Sangki Park <sangki79.park@samsung.com>  Thu, 10 Jan 2013 07:34:33 +0900
-
-bluetooth-firmware-bcm (0.2.29) unstable; urgency=low
-
-  * Update bluetooth firmware
-  * Git: magnolia/adaptation/devices/bluetooth-firmware-bcm
-  * Tag: bluetooth-firmware-bcm_0.2.29
-
- -- Sangki Park <sangki79.park@samsung.com>  Fri, 21 Dec 2012 15:01:26 +0900
-
-bluetooth-firmware-bcm (0.2.28) unstable; urgency=low
-
-  * Copy the license file in target
-  * Git: magnolia/adaptation/devices/bluetooth-firmware-bcm
-  * Tag: bluetooth-firmware-bcm_0.2.28
-
- -- Jaekyun Lee <jkyun.lee@samsung.com>  Thu, 11 Oct 2012 15:55:57 +0900
-
-bluetooth-firmware-bcm (0.2.27) unstable; urgency=low
-
-  * Apply smack manifest file
-  * Git: slp/pkgs/b/bluetooth-firmware-bcm
-  * Tag: bluetooth-firmware-bcm_0.2.27
-
- -- Sangki Park <sangki79.park@samsung.com>  Fri, 21 Sep 2012 09:15:16 +0900
-
-bluetooth-firmware-bcm (0.2.26) unstable; urgency=low
-
-  * change a UART baudrate from 921K to 3M
-  * Git: slp/pkgs/b/bluetooth-firmware-bcm
-  * Tag: bluetooth-firmware-bcm_0.2.26
-
- -- sangki79.park <sangki79-park@sangki>  Tue, 10 Jul 2012 14:25:45 +0900
-
-bluetooth-firmware-bcm (0.2.25) unstable; urgency=low
-
-  * Fix set bd bug as TAPI IMEI API deprecated
-  * Git: slp/pkgs/b/bluetooth-firmware-bcm
-  * Tag: bluetooth-firmware-bcm_0.2.25
-
- -- Chanyeol Park <chanyeol.park@samsung.com>  Sun, 25 Mar 2012 17:31:22 +0900
-
-bluetooth-firmware-bcm (0.2.24) unstable; urgency=low
-
-  * Change BT firmware PCM from "Master" to "Slave".
-  * Git: slp/pkgs/b/bluetooth-firmware-bcm
-  * Tag: bluetooth-firmware-bcm_0.2.24
-
- -- Chanyeol Park <chanyeol.park@samsung.com>  Thu, 22 Mar 2012 17:08:10 +0900
-
-bluetooth-firmware-bcm (0.2.23) unstable; urgency=low
-
-  * rename es4412 to e4412
-  * Git: slp/pkgs/b/bluetooth-firmware-bcm
-  * Tag: bluetooth-firmware-bcm_0.2.23
-
- -- Jaekyun Lee <jkyun.lee@samsung.com>  Mon, 12 Mar 2012 14:31:49 +0900
-
-bluetooth-firmware-bcm (0.2.22) unstable; urgency=low
-
-  * split firmware from bluetooth-dev-tool
-  * Git: slp/pkgs/b/bluetooth-firmware-bcm
-  * Tag: bluetooth-firmware-bcm_0.2.22
-
- -- Jaekyun Lee <jkyun.lee@samsung.com>  Mon, 05 Mar 2012 15:08:22 +0900
diff --git a/wearable/debian/compat b/wearable/debian/compat
deleted file mode 100644
index 7ed6ff8..0000000
--- a/wearable/debian/compat
+++ /dev/null
@@ -1 +0,0 @@
-5
diff --git a/wearable/debian/control b/wearable/debian/control
deleted file mode 100644
index 8e26bb4..0000000
--- a/wearable/debian/control
+++ /dev/null
@@ -1,44 +0,0 @@
-Source: bluetooth-firmware-bcm
-Section: devel
-Priority: optional
-Maintainer: DoHyun Pyun <dh79.pyun@samsung.com>, ChanYeol Park <chanyeol.park@samsung.com>, Girish A J <girish.joshi@samsung.com>, Jaekyun Lee <jkyun.lee@samsung.com>
-Uploaders: Sunil Behera <sunil.behera@samsung.com>
-Build-Depends: debhelper (>= 5), libglib2.0-dev, libvconf-dev
-Standards-Version: 3.7.2
-Homepage: N/A
-
-Package: bluetooth-firmware-bcm-c210
-Architecture: any
-Section: utils
-Depends: ${shlibs:Depends}, ${misc:Depends}, bluetooth-tools
-Conflicts: bluetooth-firmware-bcm-e4412
-Breaks: bluetooth-firmware-bcm-e4412
-Replaces: bluetooth-firmware-bcm-e4412
-Description: firmware and tools for C210 devices
- firmware and tools for C210 devices
-
-Package: bluetooth-firmware-bcm-e4412
-Architecture: any
-Section: utils
-Depends: ${shlibs:Depends}, ${misc:Depends}, bluetooth-tools
-Conflicts: bluetooth-firmware-bcm-c210
-Breaks: bluetooth-firmware-bcm0-c210
-Replaces: bluetooth-firmware-bcm0-c210
-Description: firmware and tools for e4412 devices
- firmware and tools for e4412 devices
-
-Package: bluetooth-firmware-bcm-c210-dbg
-Section: debug
-Architecture: any
-Depends: ${shlibs:Depends}, ${misc:Depends}, bluetooth-firmware-bcm-c210 (= ${Source-Version})
-Description: Tools for bluetooth-firmware-bcm (unstripped)
- The package contains detached debugging symbols for the binary packages
- produced by the bluetooth-firmware-bcm soruce.
-
-Package: bluetooth-firmware-bcm-e4412-dbg
-Section: debug
-Architecture: any
-Depends: ${shlibs:Depends}, ${misc:Depends}, bluetooth-firmware-bcm-e4412 (= ${Source-Version})
-Description: Tools for bluetooth-firmware-bcm (unstripped)
- The package contains detached debugging symbols for the binary packages
- produced by the bluetooth-firmware-bcm soruce.
diff --git a/wearable/debian/rules b/wearable/debian/rules
deleted file mode 100755
index d92d709..0000000
--- a/wearable/debian/rules
+++ /dev/null
@@ -1,125 +0,0 @@
-#!/usr/bin/make -f
-
-# Uncomment this to turn on verbose mode.
-#export DH_VERBOSE=1
-
-CFLAGS ?= -Wall -g
-LDFLAGS ?=
-PREFIX ?= /usr
-DATADIR ?= /opt
-PLUGIN_PREFIX ?= /usr
-
-CMAKE_BUILD_DIR ?= $(CURDIR)/cmake_build_tmp
-
-ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS)))
-	CFLAGS += -O0
-else
-	CFLAGS += -O2
-endif
-
-LDFLAGS += -Wl,--rpath=$(PREFIX)/lib -Wl,--as-needed -Wl,--unresolved-symbols=ignore-in-shared-libs
-
-configure: configure-stamp
-configure-stamp:
-	dh_testdir
-	# Add here commands to configure the package.
-	mkdir -p $(CMAKE_BUILD_DIR) && \
-	cd $(CMAKE_BUILD_DIR) && \
-	CFLAGS="$(CFLAGS) -fpie" LDFLAGS="$(LDFLAGS) -pie" \
-	cmake .. -DCMAKE_INSTALL_PREFIX=$(PREFIX) -DPLUGIN_INSTALL_PREFIX=$(PLUGIN_PREFIX)
-
-	touch configure-stamp
-
-build: build-stamp
-
-build-stamp: configure-stamp
-	dh_testdir
-
-	# Add here commands to compile the package.
-	cd $(CMAKE_BUILD_DIR) && $(MAKE)
-
-	for f in `find $(CURDIR)/debian/ -name "*.in"`; do \
-		cat $$f > $${f%.in}; \
-		sed -i -e "s#@PREFIX@#$(PREFIX)#g" $${f%.in}; \
-		sed -i -e "s#@DATADIR@#$(DATADIR)#g" $${f%.in}; \
-		sed -i -e "s#@PLUGIN_PREFIX@#$(PLUGIN_PREFIX)#g" $${f%.in}; \
-	done
-
-	touch $@
-
-clean:
-	dh_testdir
-	dh_testroot
-	rm -f build-stamp configure-stamp
-
-	# Add here commands to clean up after the build process.
-	-rm -rf $(CMAKE_BUILD_DIR)
-	for f in `find $(CURDIR)/debian/ -name "*.in"`; do \
-		rm -f $${f%.in}; \
-	done
-
-	dh_clean
-
-install: build
-	dh_testdir
-	dh_testroot
-	dh_clean -k
-	dh_installdirs
-
-	# Add here commands to install the package into debian/wavplayer.
-	cd $(CMAKE_BUILD_DIR) && $(MAKE) DESTDIR=$(CURDIR)/debian/tmp install
-
-
-
-	# Booting script
-
-# Build architecture-independent files here.
-binary-indep: build install
-# We have nothing to do by default.
-
-# Build architecture-dependent files here.
-binary-arch: build install
-	dh_testdir
-	dh_testroot
-	dh_installchangelogs
-	dh_installdocs
-	dh_installexamples
-	dh_install --sourcedir=debian/tmp
-
-	# Install extra shell script
-	mkdir -p $(CURDIR)/debian/bluetooth-firmware-bcm-c210/usr/etc/bluetooth/
-	mkdir -p $(CURDIR)/debian/bluetooth-firmware-bcm-e4412/usr/etc/bluetooth/
-
-	cp -a  $(CURDIR)/debian/tmp/usr/etc/bluetooth/bt-dev-end.sh   	$(CURDIR)/debian/bluetooth-firmware-bcm-c210/usr/etc/bluetooth/bt-dev-end.sh
-	cp -a  $(CURDIR)/debian/tmp/usr/etc/bluetooth/bt-dev-start-c210.sh   $(CURDIR)/debian/bluetooth-firmware-bcm-c210/usr/etc/bluetooth/bt-dev-start.sh
-	cp -a  $(CURDIR)/debian/tmp/usr/etc/bluetooth/bt-set-addr.sh  $(CURDIR)/debian/bluetooth-firmware-bcm-c210/usr/etc/bluetooth/bt-set-addr.sh
-
-	cp -a  $(CURDIR)/debian/tmp/usr/etc/bluetooth/bt-dev-end.sh   	$(CURDIR)/debian/bluetooth-firmware-bcm-e4412/usr/etc/bluetooth/bt-dev-end.sh
-	cp -a  $(CURDIR)/debian/tmp/usr/etc/bluetooth/bt-dev-start-e4412.sh   $(CURDIR)/debian/bluetooth-firmware-bcm-e4412/usr/etc/bluetooth/bt-dev-start.sh
-	cp -a  $(CURDIR)/debian/tmp/usr/etc/bluetooth/bt-set-addr.sh  $(CURDIR)/debian/bluetooth-firmware-bcm-e4412/usr/etc/bluetooth/bt-set-addr.sh
-
-#	dh_installmenu
-#	dh_installdebconf
-#	dh_installlogrotate
-#	dh_installemacsen
-#	dh_installpam
-#	dh_installmime
-#	dh_python
-#	dh_installinit
-#	dh_installcron
-#	dh_installinfo
-	dh_installman
-	dh_link
-	dh_strip --dbg-package=bluetooth-firmware-bcm-c210-dbg --dbg-package=bluetooth-firmware-bcm-e4412-dbg
-	dh_compress
-	dh_fixperms
-#	dh_perl
-	dh_makeshlibs
-	dh_installdeb
-	dh_shlibdeps
-	dh_gencontrol
-	dh_md5sums
-	dh_builddeb
-
-binary: binary-indep binary-arch
-.PHONY: build clean binary-indep binary-arch binary install configure
diff --git a/wearable/firmware/BCM4330B1_002.001.003.0221.0265.hcd b/wearable/firmware/BCM4330B1_002.001.003.0221.0265.hcd
deleted file mode 100644
index a8c7f30..0000000
--- a/wearable/firmware/BCM4330B1_002.001.003.0221.0265.hcd
+++ /dev/null
diff --git a/wearable/firmware/BCM4334B0_002.001.013.0079.0081.hcd b/wearable/firmware/BCM4334B0_002.001.013.0079.0081.hcd
deleted file mode 100644
index ff13214..0000000
--- a/wearable/firmware/BCM4334B0_002.001.013.0079.0081.hcd
+++ /dev/null
diff --git a/wearable/scripts/bt-dev-start-c210.sh b/wearable/scripts/bt-dev-start-c210.sh
deleted file mode 100755
index 0fbadbe..0000000
--- a/wearable/scripts/bt-dev-start-c210.sh
+++ /dev/null
@@ -1,91 +0,0 @@
-#!/bin/sh
-
-# Script for registering Broadcom UART BT device
-BT_UART_DEVICE=/dev/ttySAC0
-BT_CHIP_TYPE=bcm2035
-BCM_TOOL=/usr/bin/bcmtool_4330b1
-BT_ADDR=/csa/bluetooth/.bd_addr
-
-BT_PLATFORM_DEFAULT_HCI_NAME="SLP2.0_BT"
-UART_SPEED=3000000
-
-#set default firmware
-#for SLP7_C210, SLP10_C210
-BCM_FIRMWARE=BCM4330B1_002.001.003.0013.0000_SS-SLP7-B42_NoExtLNA_37_4MHz-TEST-ONLY.hcd
-
-REVISION_NUM=`grep Revision /proc/cpuinfo | awk "{print \\$3}"`
-REVISION_HIGH=`echo $REVISION_NUM| cut -c1-2`
-REVISION_LOW=`echo $REVISION_NUM| cut -c3-`
-
-HARDWARE=`grep Hardware /proc/cpuinfo | awk "{print \\$3}"`
-
-if [ "$HARDWARE" = "U1SLP" ] ||
-   [ "$HARDWARE" = "U1HD" ]; then
-	echo $HARDWARE "BCM4330 B1"
-	BCM_FIRMWARE=BCM4330B1_002.001.003.0221.0265.hcd
-fi
-echo $BCM_FIRMWARE
-
-if [ ! -e "$BT_UART_DEVICE" ]
-then
-	mknod $BT_UART_DEVICE c 204 64
-fi
-
-# Set BT address: This will internally check for the file presence
-/usr/bin/setbd
-
-#if the setbd return non 0, which means incorrect bd address file, then exit
-if [ $? -ne 0 ]
-then
-	exit 1
-fi
-
-# Trun-on Bluetooth Chip
-rfkill unblock bluetooth
-
-echo "Check for Bluetooth device status"
-if (/usr/sbin/hciconfig | grep hci); then
-	echo "Bluetooth device is UP"
-	/usr/sbin/hciconfig hci0 up
-else
-	echo "Bluetooth device is DOWN"
-	echo "Registering Bluetooth device"
-
-	$BCM_TOOL $BT_UART_DEVICE -FILE=/usr/etc/bluetooth/$BCM_FIRMWARE -BAUD=$UART_SPEED -ADDR=$BT_ADDR -SETSCO=0,0,0,0,0,0,0,3,3,0 -LP > /dev/null 2>&1 &
-	bcmtool_pid=$!
-	#Check next 2.4 seconds for bcmtool success
-	for (( i=1; i<=24; i++))
-	do
-		sleep 0.1
-		kill -0 $bcmtool_pid
-		bcmtool_alive=$?
-
-		if [ $i -eq 24 ]
-		then
-			echo "time expired happen $i"
-			kill -TERM $bcmtool_pid
-			rfkill block bluetooth
-			exit 1
-		fi
-
-		if [ $bcmtool_alive -eq 0 ]
-		then
-			echo "Continue....$i"
-			continue
-		else
-			echo "Break.......$i"
-			break
-		fi
-	done
-
-	# Attaching Broadcom device
-	if (/usr/sbin/hciattach $BT_UART_DEVICE -s $UART_SPEED $BT_CHIP_TYPE $UART_SPEED flow); then
-		sleep 0.1
-		echo "HCIATTACH success"
-	else
-		echo "HCIATTACH failed"
-		rfkill block bluetooth
-	fi
-fi
-
-#/usr/sbin/hciconfig hci0 down
diff --git a/wearable/scripts/bt-set-addr.sh b/wearable/scripts/bt-set-addr.sh
deleted file mode 100755
index fd553cd..0000000
--- a/wearable/scripts/bt-set-addr.sh
+++ /dev/null
@@ -1,16 +0,0 @@
-#!/bin/sh
-
-#
-# Script for setting Bluetooth Address
-#
-
-#if [ -e /opt/etc/.bd_addr ]
-#then
-#	echo "Already .bd_addr exists"
-#	exit 0
-#fi
-
-/usr/bin/setbd
-
-echo "Set BT address successes"
-
diff --git a/wearable/set-address/CMakeLists.txt b/wearable/set-address/CMakeLists.txt
deleted file mode 100644
index c3e04db..0000000
--- a/wearable/set-address/CMakeLists.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-CMAKE_MINIMUM_REQUIRED(VERSION 2.6)
-PROJECT(setbd C)
-
-SET(SRCS setbd.c)
-
-SET(PREFIX ${CMAKE_INSTALL_PREFIX})
-
-FIND_PROGRAM(UNAME NAMES uname)
-EXEC_PROGRAM("${UNAME}" ARGS "-m" OUTPUT_VARIABLE "ARCH")
-IF("${ARCH}" STREQUAL "arm")
-	ADD_DEFINITIONS("-DTARGET")
-	MESSAGE("add -DTARGET")
-ENDIF("${ARCH}" STREQUAL "arm")
-
-ADD_DEFINITIONS("-DPREFIX=\"${CMAKE_INSTALL_PREFIX}\"")
-
-ADD_EXECUTABLE(${PROJECT_NAME} ${SRCS})
-TARGET_LINK_LIBRARIES(${PROJECT_NAME} ${package_LDFLAGS})
-
-INSTALL(TARGETS ${PROJECT_NAME} DESTINATION bin)
-
diff --git a/wearable/set-address/setbd.c b/wearable/set-address/setbd.c
deleted file mode 100644
index 35b1d3c..0000000
--- a/wearable/set-address/setbd.c
+++ /dev/null
@@ -1,190 +0,0 @@
-/*
- * setbd.c
- *
- * Copyright (c) 2000 - 2011 Samsung Electronics Co., Ltd. All rights reserved
- *
- * Contact:  Hocheol Seo <hocheol.seo@samsung.com>
- *           GirishAshok Joshi <girish.joshi@samsung.com>
- *           DoHyun Pyun <dh79.pyun@samsung.com>
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- *
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <errno.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include <time.h>
-#include <sys/time.h>
-#include <dirent.h>
-#include <sys/stat.h>
-
-#define	BD_ADDR_PATH	"/csa/bluetooth"
-#define	BD_ADDR_FILE	"/csa/bluetooth/.bd_addr"
-
-#define	BD_ADDR_LEN	14
-#define BD_PREFIX	"0002\n"
-
-void makeRandomBD(unsigned char *buf)
-{
-	int ran;
-	int i;
-	unsigned int seed;
-	struct timeval tv;
-
-	memcpy(buf, BD_PREFIX, 5);
-	i = gettimeofday(&tv, NULL);
-
-	if (i < 0) {
-		perror("Fail to call gettimeofday()");
-		seed = time(NULL);
-	} else
-		seed = (unsigned int)tv.tv_usec;
-
-	for (i = 5; i < BD_ADDR_LEN; i++) {
-		if (7 == i) {
-			buf[i] = '\n';
-			continue;
-		}
-		ran = rand_r(&seed) % 16;
-		if (10 > ran)
-			ran += 0x30;
-		else
-			ran += 0x57;
-		buf[i] = ran;
-	}
-	printf("Random number is\r\n");
-	for (i = 0; i < BD_ADDR_LEN; i++) {
-		printf("%c", buf[i]);
-	}
-	printf("\r\n");
-}
-
-void make_bt_address_folder(void)
-{
-	DIR *dp;
-	int err;
-
-	dp = opendir(BD_ADDR_PATH);
-	if (dp == NULL) {
-		if (mkdir(BD_ADDR_PATH, 0755) < 0) {
-			err = -errno;
-			printf("mkdir: %s(%d)", strerror(-err), -err);
-		}
-		return;
-	}
-
-	closedir(dp);
-}
-
-int make_bt_address(void)
-{
-	int fd;
-	unsigned char txt[BD_ADDR_LEN];
-	char nap[4 + 1], uap[2 + 1], lap[6 + 1];
-	int ret;
-
-	make_bt_address_folder();
-
-	fd = open(BD_ADDR_FILE, O_RDONLY | O_SYNC);
-
-	if (fd < 0) {
-		printf("File not exist\n");
-
-		fd = open(BD_ADDR_FILE, O_RDWR | O_CREAT | O_TRUNC | O_SYNC,
-			  0644);
-
-		if (fd < 0) {
-			printf("Can't open address file\n");
-			return -1;
-		}
-
-		makeRandomBD(txt);
-
-		ret = write(fd, txt, BD_ADDR_LEN);
-		if (ret != BD_ADDR_LEN) {
-			printf("Unable to write device address\n");
-			close(fd);
-			unlink(BD_ADDR_FILE);
-			return -1;
-		}
-
-		lseek(fd, 0, SEEK_SET);
-	} else {
-		printf("%s is already existed\n", BD_ADDR_FILE);
-	}
-
-	ret = read(fd, nap, 5);
-	if (ret != 5)
-		goto err;
-
-	ret = read(fd, uap, 3);
-	if (ret != 3)
-		goto err;
-
-	ret = read(fd, lap, 7);
-	if (ret != 6)
-		goto err;
-
-	close(fd);
-
-	/* Unfortunately 00023fbf0a1a address is duplicated from the
-	 * previous IMEI logic. So this address should be updated with
-	 * random value.
-	 *
-	 * This is temporal code. And this would be reverted around a few week
-	 * after the wrong addressed device has proper address.
-	 */
-	if (strncmp(nap, "0002", 4) == 0 &&
-	    strncmp(uap, "3f", 2) == 0 && strncmp(lap, "bf0a1a", 6) == 0) {
-		printf("%s has wrong address\n", BD_ADDR_FILE);
-		fd = open(BD_ADDR_FILE, O_RDWR | O_CREAT | O_TRUNC | O_SYNC,
-			  0644);
-
-		if (fd < 0) {
-			printf("Can't open address file\n");
-			return -1;
-		}
-
-		makeRandomBD(txt);
-		ret = write(fd, txt, BD_ADDR_LEN);
-		if (ret != BD_ADDR_LEN) {
-			printf("Unable to write device address\n");
-			close(fd);
-			unlink(BD_ADDR_FILE);
-			return -1;
-		}
-
-		lseek(fd, 0, SEEK_SET);
-		close(fd);
-	}
-
-	return ret;
- err:
-	printf("read() failed, ret = %d\n", ret);
-	close(fd);
-	unlink(BD_ADDR_FILE);
-	return -1;
-}
-
-int main()
-{
-	printf("Bluetooth Address Setting\n");
-	if (make_bt_address() < 0)
-		return -1;
-
-	return 0;
-}