Initialize Tizen 2.3tizen_2.4_mobile_releasesubmit/tizen_2.4_base/20151026.091157submit/tizen_2.4_base/20151026.090051submit/tizen_2.3/20140531.085109accepted/tizen/2.4/base/20151026.1141142.3a_releasetizen_2.4_basetizen_2.3accepted/tizen_2.4_base

4 files changed, 308 insertions, 0 deletions

diff --git a/packaging/OBS-Accelerator-0.1.tar.bz2 b/packaging/OBS-Accelerator-0.1.tar.bz2
new file mode 100644
index 0000000..b569eac
--- /dev/null
+++ b/packaging/OBS-Accelerator-0.1.tar.bz2
diff --git a/packaging/baselibs.conf b/packaging/baselibs.conf
new file mode 100644
index 0000000..a3e67d6
--- /dev/null
+++ b/packaging/baselibs.conf
@@ -0,0 +1 @@
+arch i586 targets armv5tel:arm armv6l:arm armv7l:arm armv7hl:arm armv7nhl:arm
diff --git a/packaging/libarchive-x86.changes b/packaging/libarchive-x86.changes
new file mode 100644
index 0000000..823f153
--- /dev/null
+++ b/packaging/libarchive-x86.changes
@@ -0,0 +1,3 @@
+* Fri Jul  6 14:30:00 KST 2012 - UkJung Kim <ujkim@samsung.com> - 1.0
+- Added and updated OBS-Accelerator-0.1.tar.bz2
+
diff --git a/packaging/libarchive-x86.spec b/packaging/libarchive-x86.spec
new file mode 100644
index 0000000..d609131
--- /dev/null
+++ b/packaging/libarchive-x86.spec
@@ -0,0 +1,304 @@
+%define __strip /bin/true
+%define _build_name_fmt    %%{ARCH}/%%{NAME}-%%{VERSION}-%%{RELEASE}.%%{ARCH}.vanish.rpm
+# meta spec file for cross-chroot setup
+#
+# Copyright (c) 2009-2011 Martin Mohring   (martin.mohring@opensuse.org)
+# Copyright (c) 2011      5eEcoSystems     (info@5eecosystems.com)
+#
+# All modifications and additions to the file contributed by third parties
+# remain the property of the copyright owners, unless otherwise agreed
+# upon. The cross build accelerators as is, and modifications
+# and additions to the it, are licensed under the GPLv2.
+# In addition, the cross build accelerators are licensed together with
+# a package where they will be contained in
+# under the license of the prestine package (unless the
+# license for the pristine package is not an Open Source License, in which
+# case the license is the MIT License). An "Open Source License" is a
+# license that conforms to the Open Source Definition (Version 1.9)
+# published by the Open Source Initiative.
+
+#\/\/\/\/\/\/\/\/\/\/
+### only changes here
+
+#
+# The original package name
+%define oldname libarchive 
+
+#
+# The architectures this meta package is built on
+%define myexclusive i586
+
+#
+# The required package for building this package
+# This can be distribution dependent. Good start is:
+# e.g. rpm grep tar sed patchelf
+#
+BuildRequires: rpm grep tar sed patchelf
+
+#
+# Additional required packages needed in addition to those of original package
+# e.g. (usually empty) for an accelerator to be 100% compatible
+#
+#Requires:      <usuallyemptlylist>
+
+# For a real accelerator, also the old packge is required for compatibility
+# pls change this only if you know what you do
+Requires:      %oldname
+
+#
+# Release under which to put the accelerator
+# e.g. 1 or higher
+#
+Release:       8
+
+### no changes needed below this line
+# ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+### no changes needed
+#
+# The new package name - convention is %oldname-x86
+%define newname %{oldname}-x86
+#
+# The version of the original package is read from its rpm db info
+%{expand:%%define newversion %(rpm -q --qf '[%{version}]' %oldname)}
+#
+# The license of the original package is read from its rpm db info
+%{expand:%%define newlicense %(rpm -q --qf '[%{license}]' %oldname)}
+#
+# The group information of the original package
+%{expand:%%define newgroup %(rpm -q --qf '[%{group}]' %oldname)}
+#
+# The summary of the original package
+%{expand:%%define newsummary %(rpm -q --qf '[%{summary} - special version ]' %oldname)}
+#
+# New rpath to add to files on request
+%define newrpath "/emul/ia32-linux/lib:/emul/ia32-linux/usr/lib"
+%define newinterpreter /emul/ia32-linux/lib/ld-linux.so.2
+#
+# Some automatic checks for availability
+# binaries_to_prepare
+%define binaries_to_prepare %{expand:%(test -e %{_sourcedir}/binaries_to_prepare && echo 1 || echo 0)}
+%define libraries_to_prepare %{expand:%(test -e %{_sourcedir}/libraries_to_prepare && echo 1 || echo 0)}
+%define special_script %{expand:%(test -e %{_sourcedir}/special_script && echo 1 || echo 0)}
+%define files_to_ignore %{expand:%(test -e %{_sourcedir}/files_to_ignore && echo 1 || echo 0)}
+#
+### no changes needed below this line
+%define nodebug 1
+
+
+Name:          %newname
+Version:       %newversion
+AutoReqProv:   0
+Provides:      %newname
+BuildRequires: %oldname
+# no auto requirements - they're generated
+License:       %newlicense
+Group:         %newgroup
+ExclusiveArch: %myexclusive
+Summary:       Dont use %newsummary !
+BuildRoot:     %{_tmppath}/%{name}-%{version}-build
+%if %binaries_to_prepare
+Source10:      binaries_to_prepare
+%endif
+%if %libraries_to_prepare
+Source20:      libraries_to_prepare
+%endif
+%if %special_script
+Source30:      special_script
+%endif
+%if %files_to_ignore
+Source40:      files_to_ignore
+%endif
+Source100:     baselibs.conf
+
+%description
+This is a meta-package providing %name.
+It is not intended to be used on a normal system/device!
+Original description:
+%{expand:%(rpm -q --qf '[%{description}]' %oldname)}
+
+
+%prep
+
+%build
+
+%install
+%if %nodebug
+set +x
+%endif
+mkdir -p %buildroot
+rpm -ql %oldname > filestoinclude1
+
+# ignore files - construct sed script
+sedtmp="sedtmp.$$"
+echo "s#^%{_docdir}.*##" >> $sedtmp
+echo "s#^%{_mandir}.*##" >> $sedtmp
+echo "s#^%{_infodir}.*##" >> $sedtmp
+
+# evaluate files_to_ignore
+%if %files_to_ignore
+for i in `cat %{_sourcedir}/files_to_ignore`; do
+ echo "Ignoring file: $i"
+ echo "s#^${i}.*##" >> $sedtmp
+done
+%endif
+
+# ignore default filesystem files
+for i in `rpm -ql filesystem`; do
+  echo "s#^${i}\$##" >> $sedtmp
+done
+
+#finish up
+echo "/^\$/d" >> $sedtmp
+
+#execute
+sed -f $sedtmp -i filestoinclude1
+
+# tar copy to buildroot
+tar -T filestoinclude1 -cpf - | ( cd %buildroot && tar -xpf - )
+rm filestoinclude1
+
+# Todo: refractor
+# no directories, in filelist
+find %buildroot >  filestoinclude2
+cat filestoinclude2 | sed -e "s#%{buildroot}##g" | uniq | sort > filestoinclude1
+for i in `cat filestoinclude1`; do
+# no directories
+  if ! test -d %buildroot/$i ; then
+    # 
+    echo "$i" >> filestoinclude
+  fi
+done
+rm filestoinclude1
+rm filestoinclude2
+
+# patchelf the binaries
+%if %binaries_to_prepare
+echo ""
+echo "[ .oO Preparing binaries Oo. ]"
+echo ""
+mkdir -p %buildroot/%{_prefix}/share/applybinary/
+for binary in `cat %{_sourcedir}/binaries_to_prepare` ; do
+  echo "Processing binary: $binary"
+  tmp="tmp.$$"
+%if %nodebug
+  debug=
+%else
+  debug="--debug"
+%endif
+  if file $binary | grep -q dynamic; then
+    ldd $binary  | grep -v "ld-linux" | grep -v "linux-gate" |  sed -e "s#=.*##g" -e "s#^\t*##g"  > $tmp
+    deps=$(for i in `cat $tmp` ; do rpm -q --whatprovides "$i" | grep -v "no package"; done)
+    cleandeps=$(echo "$cleandeps" "$deps" | sort | uniq | sed -e "s/-[0-9].*//g")
+    patchelf $debug --set-rpath %newrpath %buildroot/$binary
+    patchelf $debug --set-interpreter %newinterpreter %buildroot/$binary
+    patchelf $debug --set-rpath %newrpath %buildroot/$binary
+    patchelf $debug --set-interpreter %newinterpreter %buildroot/$binary
+    if test -n "$debug"; then
+      patchelf --print-rpath %buildroot/$binary
+      patchelf --print-interpreter %buildroot/$binary
+    fi
+  fi
+  echo "$binary" >> %buildroot/%{_prefix}/share/applybinary/%name
+  echo ""
+done
+%endif
+
+# stub
+%if %libraries_to_prepare
+echo ""
+echo "[ .oO Preparing libraries Oo. ]"
+echo ""
+%endif
+
+# stub
+%if %special_script
+echo ""
+echo "[ .oO Executing special script Oo. ]"
+echo ""
+%endif
+
+# lets start the shellquote nightmare ;)
+shellquote()
+{
+    for arg; do
+        arg=${arg//\\/\\\\}
+#        arg=${arg//\$/\$}   # already needs quoting ;(
+#        arg=${arg/\"/\\\"}  # dito
+#        arg=${arg//\`/\`}   # dito
+        arg=${arg//\\|/\|}
+        arg=${arg//\\|/|}
+        echo "$arg"
+    done
+}
+
+
+echo "Creating baselibs_new.conf"
+echo ""
+rm -rRf /tmp/baselibs_new.conf || true
+
+shellquote "%{name}" >> /tmp/baselibs_new.conf
+shellquote "  targettype x86 block!" >> /tmp/baselibs_new.conf
+shellquote "  targettype 32bit block!" >> /tmp/baselibs_new.conf
+shellquote "  targettype arm autoreqprov off" >> /tmp/baselibs_new.conf
+
+# automagically fill in basic requirements
+for i in $cleandeps ; do 
+  shellquote "  targettype arm requires \"${i}-x86-arm\"" >> /tmp/baselibs_new.conf
+done
+
+# we require the native version
+shellquote "  targettype arm requires \"%{oldname}\" " >> /tmp/baselibs_new.conf
+shellquote "  targettype arm prefix /emul/ia32-linux" >> /tmp/baselibs_new.conf
+shellquote "  targettype arm extension -arm" >> /tmp/baselibs_new.conf
+shellquote "  targettype arm +/" >> /tmp/baselibs_new.conf
+
+# safe space and download time
+shellquote "  targettype arm -/%{_mandir}" >> /tmp/baselibs_new.conf
+shellquote "  targettype arm -/%{_docdir}" >> /tmp/baselibs_new.conf
+shellquote "  targettype arm requires \"tizen-accelerator\"" >> /tmp/baselibs_new.conf
+
+# replace native with x86 binaries as defined in file
+%if %binaries_to_prepare
+# Todo: error handling if .orig-arm is present
+for binary in `cat %{_sourcedir}/binaries_to_prepare` ; do
+   shellquote "  targettype arm post \"  if test -e ${binary}.orig-arm -a -h ${binary}; then \" " >> /tmp/baselibs_new.conf
+   shellquote "  targettype arm post \"    echo \"${binary}.orig-arm already present - skipping.\" \" " >> /tmp/baselibs_new.conf
+   shellquote "  targettype arm post \"  else \" " >> /tmp/baselibs_new.conf
+   shellquote "  targettype arm post \"    mv ${binary} ${binary}.orig-arm ; ln -s <prefix>${binary} ${binary} \"" >> /tmp/baselibs_new.conf
+   shellquote "  targettype arm post \"  fi \" " >> /tmp/baselibs_new.conf
+done
+
+shellquote " " >> /tmp/baselibs_new.conf
+for binary in `cat %{_sourcedir}/binaries_to_prepare` ; do
+
+  shellquote "  targettype arm preun \"  if test -e ${binary}.orig-arm ; then \"" >> /tmp/baselibs_new.conf
+  shellquote "  targettype arm preun \"    rm -f ${binary} ; mv ${binary}.orig-arm ${binary}\"" >> /tmp/baselibs_new.conf
+  shellquote "  targettype arm preun \"  fi \"" >> /tmp/baselibs_new.conf
+
+done
+%endif
+
+cat /tmp/baselibs_new.conf >> %{_sourcedir}/baselibs.conf
+
+echo "################################################################################"
+echo ""
+echo ""
+echo "REQUIREMENTS:"
+grep "requires" %{_sourcedir}/baselibs.conf | sort | uniq | sed -e "s#  targettype.*requires ##g" | while read k ; do
+ echo "CBinstall: $k"
+done
+echo "Runscripts: %{newname}-arm"
+echo ""
+echo ""
+echo "################################################################################"
+set -x
+
+%clean
+rm -rf $RPM_BUILD_ROOT
+
+%files -f filestoinclude
+%defattr(-,root,root)
+%if %binaries_to_prepare
+/%{_prefix}/share/applybinary/%name
+%endif