diff options
Diffstat (limited to 'test/test014.tcl')
| -rw-r--r-- | test/test014.tcl | 252 |
1 files changed, 252 insertions, 0 deletions
diff --git a/test/test014.tcl b/test/test014.tcl new file mode 100644 index 0000000..5482376 --- /dev/null +++ b/test/test014.tcl @@ -0,0 +1,252 @@ +# See the file LICENSE for redistribution information. +# +# Copyright (c) 1996-2009 Oracle. All rights reserved. +# +# $Id$ +# +# TEST test014 +# TEST Exercise partial puts on short data +# TEST Run 5 combinations of numbers of characters to replace, +# TEST and number of times to increase the size by. +# TEST +# TEST Partial put test, small data, replacing with same size. The data set +# TEST consists of the first nentries of the dictionary. We will insert them +# TEST (and retrieve them) as we do in test 1 (equal key/data pairs). Then +# TEST we'll try to perform partial puts of some characters at the beginning, +# TEST some at the end, and some at the middle. +proc test014 { method {nentries 10000} args } { + set fixed 0 + set args [convert_args $method $args] + + if { [is_fixed_length $method] == 1 } { + set fixed 1 + } + + puts "Test014: $method ($args) $nentries equal key/data pairs, put test" + + # flagp indicates whether this is a postpend or a + # normal partial put + set flagp 0 + + eval {test014_body $method $flagp 1 1 $nentries} $args + eval {test014_body $method $flagp 1 4 $nentries} $args + eval {test014_body $method $flagp 2 4 $nentries} $args + eval {test014_body $method $flagp 1 128 $nentries} $args + eval {test014_body $method $flagp 2 16 $nentries} $args + if { $fixed == 0 } { + eval {test014_body $method $flagp 0 1 $nentries} $args + eval {test014_body $method $flagp 0 4 $nentries} $args + eval {test014_body $method $flagp 0 128 $nentries} $args + + # POST-PENDS : + # partial put data after the end of the existent record + # chars: number of empty spaces that will be padded with null + # increase: is the length of the str to be appended (after pad) + # + set flagp 1 + eval {test014_body $method $flagp 1 1 $nentries} $args + eval {test014_body $method $flagp 4 1 $nentries} $args + eval {test014_body $method $flagp 128 1 $nentries} $args + eval {test014_body $method $flagp 1 4 $nentries} $args + eval {test014_body $method $flagp 1 128 $nentries} $args + } + puts "Test014 complete." +} + +proc test014_body { method flagp chars increase {nentries 10000} args } { + source ./include.tcl + + set omethod [convert_method $method] + + if { [is_fixed_length $method] == 1 && $chars != $increase } { + puts "Test014: $method: skipping replace\ + $chars chars with string $increase times larger." + return + } + + if { $flagp == 1} { + puts "Test014: Postpending string of len $increase with \ + gap $chars." + } else { + puts "Test014: Replace $chars chars with string \ + $increase times larger" + } + + # Create the database and open the dictionary + set txnenv 0 + set eindex [lsearch -exact $args "-env"] + # + # If we are using an env, then testfile should just be the db name. + # Otherwise it is the test directory and the name. + if { $eindex == -1 } { + set testfile $testdir/test014.db + set env NULL + } else { + set testfile test014.db + incr eindex + set env [lindex $args $eindex] + set txnenv [is_txnenv $env] + if { $txnenv == 1 } { + append args " -auto_commit " + # + # If we are using txns and running with the + # default, set the default down a bit. + # + if { $nentries == 10000 } { + set nentries 100 + } + } + set testdir [get_home $env] + } + set t1 $testdir/t1 + set t2 $testdir/t2 + set t3 $testdir/t3 + cleanup $testdir $env + + set db [eval {berkdb_open \ + -create -mode 0644} $args {$omethod $testfile}] + error_check_good dbopen [is_valid_db $db] TRUE + + set gflags "" + set pflags "" + set txn "" + set count 0 + + if { [is_record_based $method] == 1 } { + append gflags " -recno" + } + + puts "\tTest014.a: put/get loop" + # Here is the loop where we put and get each key/data pair + # We will do the initial put and then three Partial Puts + # for the beginning, middle and end of the string. + set did [open $dict] + while { [gets $did str] != -1 && $count < $nentries } { + if { [is_record_based $method] == 1 } { + set key [expr $count + 1] + } else { + set key $str + } + if { $flagp == 1 } { + # this is for postpend only + global dvals + + # initial put + if { $txnenv == 1 } { + set t [$env txn] + error_check_good txn [is_valid_txn $t $env] TRUE + set txn "-txn $t" + } + set ret [eval {$db put} $txn {$key $str}] + if { $txnenv == 1 } { + error_check_good txn [$t commit] 0 + } + error_check_good dbput $ret 0 + + set offset [string length $str] + + # increase is the actual number of new bytes + # to be postpended (besides the null padding) + set data [repeat "P" $increase] + + # chars is the amount of padding in between + # the old data and the new + set len [expr $offset + $chars + $increase] + set dvals($key) [binary format \ + a[set offset]x[set chars]a[set increase] \ + $str $data] + set offset [expr $offset + $chars] + if { $txnenv == 1 } { + set t [$env txn] + error_check_good txn [is_valid_txn $t $env] TRUE + set txn "-txn $t" + } + set ret [eval {$db put -partial [list $offset 0]} \ + $txn {$key $data}] + error_check_good dbput:post $ret 0 + if { $txnenv == 1 } { + error_check_good txn [$t commit] 0 + } + } else { + if { $txnenv == 1 } { + set t [$env txn] + error_check_good txn [is_valid_txn $t $env] TRUE + set txn "-txn $t" + } + partial_put $method $db $txn \ + $gflags $key $str $chars $increase + if { $txnenv == 1 } { + error_check_good txn [$t commit] 0 + } + } + incr count + } + close $did + + # Now make sure that everything looks OK + puts "\tTest014.b: check entire file contents" + if { $txnenv == 1 } { + set t [$env txn] + error_check_good txn [is_valid_txn $t $env] TRUE + set txn "-txn $t" + } + dump_file $db $txn $t1 test014.check + if { $txnenv == 1 } { + error_check_good txn [$t commit] 0 + } + error_check_good db_close [$db close] 0 + + # Now compare the keys to see if they match the dictionary (or ints) + if { [is_record_based $method] == 1 } { + set oid [open $t2 w] + for {set i 1} {$i <= $nentries} {set i [incr i]} { + puts $oid $i + } + close $oid + file rename -force $t1 $t3 + } else { + set q q + filehead $nentries $dict $t3 + filesort $t3 $t2 + filesort $t1 $t3 + } + + error_check_good \ + Test014:diff($t3,$t2) [filecmp $t3 $t2] 0 + + puts "\tTest014.c: close, open, and dump file" + # Now, reopen the file and run the last test again. + eval open_and_dump_file $testfile $env \ + $t1 test014.check dump_file_direction "-first" "-next" $args + + if { [string compare $omethod "-recno"] != 0 } { + filesort $t2 $t3 + file rename -force $t3 $t2 + filesort $t1 $t3 + } + + error_check_good \ + Test014:diff($t3,$t2) [filecmp $t3 $t2] 0 + # Now, reopen the file and run the last test again in the + # reverse direction. + puts "\tTest014.d: close, open, and dump file in reverse direction" + eval open_and_dump_file $testfile $env $t1 \ + test014.check dump_file_direction "-last" "-prev" $args + + if { [string compare $omethod "-recno"] != 0 } { + filesort $t2 $t3 + file rename -force $t3 $t2 + filesort $t1 $t3 + } + + error_check_good \ + Test014:diff($t3,$t2) [filecmp $t3 $t2] 0 +} + +# Check function for test014; keys and data are identical +proc test014.check { key data } { + global dvals + + error_check_good key"$key"_exists [info exists dvals($key)] 1 + error_check_good "data mismatch for key $key" $data $dvals($key) +} |