summaryrefslogtreecommitdiff
path: root/include/hw/arm
AgeCommit message (Collapse)AuthorFilesLines
2015-11-03armv7-m: Return DeviceState* from armv7m_init()Michael Davidsaver1-1/+1
Change armv7m_init to return the DeviceState* for the NVIC. This allows access to all GPIO blocks, not just the IRQ inputs. Move qdev_get_gpio_in() calls out of armv7m_init() into board code for stellaris and stm32f205 boards. Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-03arm: boot: Add board specific setup code APIPeter Crosthwaite1-0/+10
Add an API for boards to inject their own preboot software (or firmware) sequence. The software then returns to the bootloader via the link register. This allows boards to do their own little bits of firmware setup without needed to replace the bootloader completely (which is the requirement for existing firmware support). The blob is loaded by a callback if and only if doing a linux boot (similar to the existing write_secondary support). Rewrite the comment for the primary boot blob. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Message-id: 070295644c6ac84696d743913296e8cfefb48c15.1446182614.git.crosthwaite.peter@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-29target-arm: xlnx-zynqmp: Add sdhci support.Sai Pavan Boddu1-0/+3
Add two SYSBUS_SDHCI devices for xlnx-zynqmp Signed-off-by: Sai Pavan Boddu <saipava@xilinx.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-09-24hw/arm/virt: Add gic-version option to virt machinePavel Fedin2-1/+4
Add gic_version to VirtMachineState, set it to value of the option and pass it around where necessary. Instantiate devices and fdt nodes according to the choice. max_cpus for virt machine increased to 123 (calculated from redistributor space available in the memory map). GICv2 compatibility check happens inside arm_gic_common_realize(). ITS region is added to the memory map too, however currently it not used, just reserved. Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Tested-by: Ashok kumar <ashoks@broadcom.com> [PMM: Added missing cpu_to_le* calls, thanks to Shannon Zhao] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-14i.MX: Add GPIO devices to i.MX25 SOCJean-Christophe Dubois1-0/+15
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Message-id: 2eb129ba8713aedfe877eaa3d8de80061d880fbb.1441828793.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-14i.MX: Add GPIO devices to i.MX31 SOCJean-Christophe Dubois1-0/+12
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Message-id: 60b67c9a8b948159f4b4163ead86fbf701c011c6.1441828793.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-14arm: xlnx-zynqmp: Fix up GIC region sizeNathan Rossi1-1/+1
The GIC in ZynqMP cover a 64K address space, however the actual registers are decoded within a 4K address space and mirrored at the 4K boundaries. This change fixes the defined size for these regions as it was set to 0x4000/16K incorrectly. Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 1441719672-25296-1-git-send-email-nathan@nathanrossi.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-08xlnx-zynqmp: Connect the sysbus AHCI to ZynqMPAlistair Francis1-0/+3
Connect the Sysbus AHCI device to ZynqMP. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Sai Pavan Boddu <saipava@xilinx.com> [PMM: removed unnecessary brackets in error_propagate call] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-08hw/arm: new interface for devices which need to behave differently for ↵Peter Maydell1-0/+43
kernel boot For ARM we have a little minimalist bootloader in hw/arm/boot.c which takes the place of firmware if we're directly booting a Linux kernel. Unfortunately a few devices need special case handling in this situation to do the initialization which on real hardware would be done by firmware. (In particular if we're booting a kernel in NonSecure state then we need to make a TZ-aware GIC put all its interrupts into Group 1, or the guest will be unable to use them.) Create a new QOM interface which can be implemented by devices which need to do something different from their default reset behaviour. The callback will be called after machine initialization and before first reset. Suggested-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 1441383782-24378-3-git-send-email-peter.maydell@linaro.org
2015-09-07i.MX: Add i2C devices to i.MX31 SOCJean-Christophe Dubois1-0/+11
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Message-id: fb20e6bf5cf946c4530b2cfb55c7e37f5a0fc051.1441057361.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-07i.MX: Add qtest support for I2C device emulator.Jean-Christophe Dubois1-0/+1
This is using a ds1338 RTC chip on the I2C bus. This RTC chip is not present on the real 3DS PDK board. Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Acked-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Message-id: 05601683a2a95c881cbc9f22651a044d969bd0ae.1441057361.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-07i.MX: Add SOC support for i.MX25Jean-Christophe Dubois1-0/+234
For now we support the following devices: * CPU: ARM926 * Interrupt Controller: AVIC * CCM * UART x 5 * EPIT x 2 * GPT x 4 * FEC * I2C x 3 Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Message-id: 62218bfa90f9101f79098e768c3d58bd92dcb7f3.1441057361.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-07i.MX: KZM: use standalone i.MX31 SOC supportJean-Christophe Dubois1-26/+0
Convert the KZM board to use the i.MX31 SoC defintition instead of redefining the entire SoC on the machine level. Major rewrite of the machine init code. While touching the memory map comment de-indent to the correct level of indentation. This obsoletes the legacy i.MX device device creation helpers which are removed. Tested by booting a minimal Linux system on the emulated platform Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Message-id: 5e783561f092e1c939562fdff001f1ab1194b07f.1441057361.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-07i.MX: Add SOC support for i.MX31Jean-Christophe Dubois1-0/+98
For now we support the following devices: * CPU: ARM1136 * Interrupt Controller: AVIC * CCM * UART x 2 * EPIT x 2 * GPT Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: f146d819594e41568daec42a1d0f440cdfe3df76.1441057361.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-07hw/arm/virt: Add high MMIO PCI region, 512G in sizePavel Fedin2-0/+2
This large region is necessary for some devices like ivshmem and video cards 32-bit kernels can be built without LPAE support. In this case such a kernel will not be able to use PCI controller which has windows in high addresses. In order to work around the problem, "highmem" option is introduced. It defaults to on on, but can be manually set to off in order to be able to run those old 32-bit guests. Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Reviewed-by: Alexander Graf <agraf@suse.de> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org> [PMM: Added missing ULL suffixes and a comment to the a15memmap[] entry] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-08-25xlnx-zynqmp: Connect the four OCM banksAlistair Francis1-0/+6
The Xilinx EP108 has four separate OCM banks which are located adjacent to each other. This patch adds the four banks to the ZynqMP SoC. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: afa6ba31163a5d541a0bef4b0dc11f2597e0c495.1436813543.git.alistair.francis@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-08-13i.MX: Split CCM emulator in a header file and a source fileJean-Christophe Dubois1-10/+2
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: b1d6f990229b2608bbaba24f4ff359571c0b07da.1437080501.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-07-06Stop including qemu-common.h in memory.hPeter Maydell1-0/+1
Including qemu-common.h from other header files is generally a bad idea, because it means it's very easy to end up with a circular dependency. For instance, if we wanted to include memory.h from qom/cpu.h we'd end up with this loop: memory.h -> qemu-common.h -> cpu.h -> cpu-qom.h -> qom/cpu.h -> memory.h Remove the include from memory.h. This requires us to fix up a few other files which were inadvertently getting declarations indirectly through memory.h. The biggest change is splitting the fprintf_function typedef out into its own header so other headers can get at it without having to include qemu-common.h. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <1435933104-15216-1-git-send-email-peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-19arm: xlnx-zynqmp: Add 2xCortexR5 CPUsPeter Crosthwaite1-0/+2
Add the 2xCortexR5 CPUs to zynqmp board. They are powered off on reset (this is true of real hardware) by default or selectable as the boot processor. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: da34128c73ca13fc4f8c3293e1a33d1e1e345655.1434501320.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-19arm: xlnx-zynqmp: Add boot-cpu propertyPeter Crosthwaite1-0/+3
Add a string property that specifies the primary boot cpu. All CPUs except the one selected will start-powered-off. This allows for elf boots on any CPU, which prepares support for booting R5 elfs directly on the R5 processors. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 53331c00d80c7ce9c6a83712348773f1b38fae2b.1434501320.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-19arm: xlnx-zynqmp: Preface CPU variables with "apu"Peter Crosthwaite1-2/+2
The CPUs currently supported by zynqmp are the APU (application processing unit) CPUs. There are other CPUs in Zynqmp so unqualified "cpus" in ambiguous. Preface the variables with "APU" accordingly, to prepare support adding the RPU (realtime processing unit) processors. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: ce32287fc365aea898465e981da3546a227e0811.1434501320.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-19hw/arm/sysbus-fdt: enable vfio-calxeda-xgmac dynamic instantiationEric Auger1-0/+34
This patch allows the instantiation of the vfio-calxeda-xgmac device from the QEMU command line (-device vfio-calxeda-xgmac,host="<device>"). A specialized device tree node is created for the guest, containing compat, dma-coherent, reg and interrupts properties. Signed-off-by: Eric Auger <eric.auger@linaro.org> Acked-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1434455898-17895-1-git-send-email-eric.auger@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-02hw/arm/virt: add dynamic sysbus device supportEric Auger1-0/+1
Allows sysbus devices to be instantiated from command line by using -device option. Machvirt creates a platform bus at init. The dynamic sysbus devices are attached to this platform bus device. The platform bus device registers a machine init done notifier whose role will be to bind the dynamic sysbus devices. Indeed dynamic sysbus devices are created after machine init. machvirt also registers a notifier that will build the device tree nodes for the platform bus and its children dynamic sysbus devices. Signed-off-by: Eric Auger <eric.auger@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1433244554-12898-4-git-send-email-eric.auger@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-02hw/arm/boot: arm_load_kernel implemented as a machine init done notifierEric Auger1-0/+28
Device tree nodes for the platform bus and its children dynamic sysbus devices are added in a machine init done notifier. To load the dtb once, after those latter nodes are built and before ROM freeze, the actual arm_load_kernel existing code is moved into a notifier notify function, arm_load_kernel_notify. arm_load_kernel now only registers the corresponding notifier. Machine files that do not support platform bus stay unchanged. Machine files willing to support dynamic sysbus devices must call arm_load_kernel before sysbus-fdt arm_register_platform_bus_fdt_creator to make sure dynamic sysbus device nodes are integrated in the dtb. Signed-off-by: Eric Auger <eric.auger@linaro.org> Reviewed-by: Shannon Zhao <zhaoshenglong@huawei.com> Reviewed-by: Alexander Graf <agraf@suse.de> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1433244554-12898-3-git-send-email-eric.auger@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-02hw/arm/sysbus-fdt: helpers for platform bus nodes additionEric Auger1-0/+60
This new C module will be used by ARM machine files to generate platform bus node and their dynamic sysbus device tree nodes. Dynamic sysbus device node addition is done in a machine init done notifier. arm_register_platform_bus_fdt_creator does the registration of this latter and is supposed to be called by ARM machine files that support platform bus and their dynamic sysbus. Addition of dynamic sysbus nodes is done only if the user did not provide any dtb. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Eric Auger <eric.auger@linaro.org> Reviewed-by: Shannon Zhao <zhaoshenglong@huawei.com> Reviewed-by: Alexander Graf <agraf@suse.de> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1433244554-12898-2-git-send-email-eric.auger@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-02target-arm: Add the GICv2m to the virt boardChristoffer Dall1-0/+2
Add a GICv2m device to the virt board to enable MSIs on the generic PCI host controller. We allocate 64 SPIs in the IRQ space for now (this can be increased/decreased later) and map the GICv2m right after the GIC in the memory map. Reviewed-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Message-id: 1432897270-7780-5-git-send-email-christoffer.dall@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-05-29hw/arm/virt-acpi-build: Generate GTDT tableShannon Zhao1-0/+5
ACPI v5.1 defines GTDT for ARM devices as a place to describe timer related information in the system. The Arch Timer interrupts must be provided for GTDT. Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1432522520-8068-11-git-send-email-zhaoshenglong@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-05-29hw/arm/virt-acpi-build: Generate MADT tableShannon Zhao1-0/+3
MADT describes GIC enabled ARM platforms. The GICC and GICD subtables are used to define the GIC regions. Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1432522520-8068-10-git-send-email-zhaoshenglong@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-05-29hw/arm/virt-acpi-build: Basic framework for building ACPI tables on ARMShannon Zhao1-0/+41
Introduce a preliminary framework in virt-acpi-build.c with the main ACPI build functions. It exposes the generated ACPI contents to guest over fw_cfg. The required ACPI v5.1 tables for ARM are: - RSDP: Initial table that points to XSDT - RSDT: Points to FADT GTDT MADT tables - FADT: Generic information about the machine - GTDT: Generic timer description table - MADT: Multiple APIC description table - DSDT: Holds all information about system devices/peripherals, pointed by FADT Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-id: 1432522520-8068-5-git-send-email-zhaoshenglong@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-05-29hw/arm/virt: Record PCIe ranges in MemMapEntry arrayShannon Zhao1-0/+3
To generate ACPI table for PCIe controller, we need the base and size of the PCIe ranges. Record these ranges in MemMapEntry array, then we could share and use them for generating ACPI table. Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Message-id: 1432522520-8068-4-git-send-email-zhaoshenglong@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-05-29hw/arm/virt: Move common definitions to virt.hShannon Zhao1-0/+56
Move some common definitions to virt.h. These will be used by generating ACPI tables. Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1432522520-8068-3-git-send-email-zhaoshenglong@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-05-18arm: xlnx-zynqmp: Add UART supportPeter Crosthwaite1-0/+3
There are 2x Cadence UARTs in Zynq MP. Add them. Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: e30795536f77599fabc1052278d846ccd52322e2.1431381507.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-05-18arm: xlnx-zynqmp: Add GEM supportPeter Crosthwaite1-0/+3
There are 4x Cadence GEMs in ZynqMP. Add them. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 7d3e68e5495d145255f0ee567046415e3a26d67e.1431381507.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-05-18arm: xlnx-zynqmp: Add GICPeter Crosthwaite1-0/+14
Add the GIC and connect IRQ outputs to the CPUs. The GIC regions are under-decoded through a 64k address region so implement aliases accordingly. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 5853189965728d676106d9e94e76b9bb87981cb5.1431381507.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-05-18arm: Introduce Xilinx ZynqMP SoCPeter Crosthwaite1-0/+38
With quad Cortex-A53 CPUs. Use SMC PSCI, with the standard policy of secondaries starting in power-off. Tested-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: a16202a6c7b79e446e5289d38cb18d2ee4b897a0.1431381507.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-04-13stm32f205: Fix SoC type nameAndreas Färber1-1/+1
The type name for the SoC device, unlike those of its sub-devices, did not follow the QOM naming conventions. While the usage is internal only, this is exposed through QMP and HMP, so fix it before release. Cc: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Alistair Francis <alistair@alistair23.me> Message-id: 1428676676-23056-1-git-send-email-afaerber@suse.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-11stm32f205: Add the stm32f205 SoCAlistair Francis1-0/+57
This patch adds the stm32f205 SoC. This will be used by the Netduino 2 to create a machine. Signed-off-by: Alistair Francis <alistair@alistair23.me> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 48d509747a1ea0d8a7d5480560495e679990f9d2.1424175342.git.alistair@alistair23.me Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-02-05target_arm: Parameterise the irq lines for armv7m_initAlistair Francis1-1/+1
This patch allows the board to specifiy the number of NVIC interrupt lines when using armv7m_init. Signed-off-by: Alistair Francis <alistair23@gmail.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 5a0b0fcc778df0340899f488053acc9493679e03.1422077994.git.alistair23@gmail.com [PMM: removed stale FIXME comment] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-02-05target_arm: Remove memory region init from armv7m_initAlistair Francis1-2/+1
This patch moves the memory region init code from the armv7m_init function to the stellaris_init function Signed-off-by: Alistair Francis <alistair23@gmail.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 4836be7e1d708554d6eb0bc639dc2fbf7dac0458.1422077994.git.alistair23@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-22hw/arm: pass pristine kernel image to guest firmware over fw_cfgLaszlo Ersek1-0/+5
Introduce the new boolean field "arm_boot_info.firmware_loaded". When this field is set, it means that the portion of guest DRAM that the VCPU normally starts to execute, or the pflash chip that the VCPU normally starts to execute, has been populated by board-specific code with full-fledged guest firmware code, before the board calls arm_load_kernel(). Simultaneously, "arm_boot_info.firmware_loaded" guarantees that the board code has set up the global firmware config instance, for arm_load_kernel() to find with fw_cfg_find(). Guest kernel (-kernel) and guest firmware (-bios, -pflash) has always been possible to specify independently on the command line. The following cases should be considered: nr -bios -pflash -kernel description unit#0 -- ------- ------- ------- ------------------------------------------- 1 present present absent Board code rejects this case, -bios and present present present -pflash unit#0 are exclusive. Left intact by this patch. 2 absent absent present Traditional kernel loading, with qemu's minimal board firmware. Left intact by this patch. 3 absent present absent Preexistent case for booting guest firmware present absent absent loaded with -bios or -pflash. Left intact by this patch. 4 absent absent absent Preexistent case for not loading any firmware or kernel up-front. Left intact by this patch. 5 present absent present New case introduced by this patch: kernel absent present present image is passed to externally loaded firmware in unmodified form, using fw_cfg. An easy way to see that this patch doesn't interfere with existing cases is to realize that "info->firmware_loaded" is constant zero at this point. Which makes the "outer" condition unchanged, and the "inner" condition (with the fw_cfg-related code) dead. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1419250305-31062-11-git-send-email-pbonzini@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-22target-arm: Add arm_boot_info secure_boot controlGreg Bellows1-0/+4
Adds the secure_boot boolean field to the arm_boot_info descriptor. This fields is used to indicate whether Linux should boot into secure or non-secure state if the ARM EL3 feature is enabled. The default is to leave the CPU in an unaltered reset state. On EL3 enabled systems, the reset state is secure and can be overridden by setting the added field to false. Signed-off-by: Greg Bellows <greg.bellows@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1418684992-8996-11-git-send-email-greg.bellows@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-10-20hw: Convert from BlockDriverState to BlockBackend, mostlyMarkus Armbruster2-3/+3
Device models should access their block backends only through the block-backend.h API. Convert them, and drop direct includes of inappropriate headers. Just four uses of BlockDriverState are left: * The Xen paravirtual block device backend (xen_disk.c) opens images itself when set up via xenbus, bypassing blockdev.c. I figure it should go through qmp_blockdev_add() instead. * Device model "usb-storage" prompts for keys. No other device model does, and this one probably shouldn't do it, either. * ide_issue_trim_cb() uses bdrv_aio_discard() instead of blk_aio_discard() because it fishes its backend out of a BlockAIOCB, which has only the BlockDriverState. * PC87312State has an unused BlockDriverState[] member. The next two commits take care of the latter two. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-08-19arm: armv7m: Rename address_space_mem -> system_memoryPeter Crosthwaite1-1/+1
This argument is a MemoryRegion and not an AddressSpace. "Address space" means something quite different to "memory region" in QEMU parlance so rename the variable to reduce confusion. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: f666cf7f2318d9b461b1e320a45bf0d82da9b7dd.1408347860.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-14i2c: Rename i2c_bus to I2CBusAndreas Färber3-3/+3
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-02-08hw/arm/allwinner-a10: initialize EMACBeniamino Galvani1-0/+3
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-01-01pxa27x: Add 'const' attribute to keyboard mapsStefan Weil1-2/+2
The mapping is a hardware feature, so it is relatively constant. Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-01-01pxa27x: Reduce size of keyboard matrix mappingStefan Weil1-2/+2
The row and column values use only a very limited range (-1 ... 7), so a byte value is sufficient. Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-12-17hw/arm: add allwinner a10 SoC supportliguang1-0/+35
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 1387159292-10436-5-git-send-email-lig.fnst@cn.fujitsu.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17hw/arm/digic: add UART supportAntony Pavlov1-0/+2
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 1387188908-754-5-git-send-email-antonynpavlov@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17hw/arm/digic: add timer supportAntony Pavlov1-0/+6
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 1387188908-754-4-git-send-email-antonynpavlov@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-26 20:38:00 +0000