summaryrefslogtreecommitdiff
path: root/hw/mips_malta.c
AgeCommit message (Collapse)AuthorFilesLines
2011-04-09smbus_eeprom: consolidate smbus eeprom creation oc pc_piix, mips_mapta, ↵Isaku Yamahata1-10/+2
mips_fulong consolidate smbus initialization for pc_piix, mips_malta and mips_fulong. Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Huacai Chen <zltjiangshi@gmail.com> Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-07ide: consolidate drive_get(IF_IDE)Isaku Yamahata1-9/+1
factor out ide initialization to call drive_get(IF_IDE) Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-02-21isa-bus: Remove bogus IRQ sharing checkJan Kiszka1-1/+1
Nothing prevented IRQ sharing on the ISA bus in principle. Not all boards supported this, neither each and every card nor driver and OS. Still, there existed valid IRQ sharing scenarios, (at least) two of them can also be found in QEMU: >2 PC UARTs and the PREP IDE buses. So remove this artificial restriction from our ISA model. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-02-20i8254: convert to qdevBlue Swirl1-2/+2
Convert to qdev. Don't expose PITState. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-02-12x86,MIPS: make vmware_vga optionalBlue Swirl1-1/+5
Allow failure with vmware_vga device creation and use standard VGA instead. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-01-25audio: consolidate audio_init()Isaku Yamahata1-21/+2
consolidate audio_init() and remove references to shoundhw. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-20gt64xxx: qdev conversionAurelien Jarno1-1/+1
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-14mips/malta: fix board idAurelien Jarno1-1/+1
Board id can't be written with stl_phys() as it's read-only part of memory. Use stl_p() on the memory buffer instead. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-12-11Add endianness as io mem parameterAlexander Graf1-1/+2
As stated before, devices can be little, big or native endian. The target endianness is not of their concern, so we need to push things down a level. This patch adds a parameter to cpu_register_io_memory that allows a device to choose its endianness. For now, all devices simply choose native endian, because that's the same behavior as before. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-11-16more stdvga cleanups.Gerd Hoffmann1-1/+1
video.x is gone now. It was the only user of the vga bios_offset + bios_size logic. Zap it. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2010-10-13Delete write only variablesBlue Swirl1-9/+5
Compiling with GCC 4.6.0 20100925 produced warnings like: /src/qemu/net/tap-win32.c: In function 'tap_win32_open': /src/qemu/net/tap-win32.c:582:12: error: variable 'hThread' set but not used [-Werror=unused-but-set-variable] Fix by removing the unused variables. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-10-03Use GCC_FMT_ATTR (format checking)Stefan Weil1-1/+2
Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-09-21mips_malta: Fix format stringsStefan Weil1-2/+2
Fix two compiler warnings (when format attribute is applied). Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-08-24Rearrange block headersBlue Swirl1-0/+1
Changing block.h or blockdev.h resulted in recompiling most objects. Move DriveInfo typedef and BlockInterfaceType enum definitions to qemu-common.h and rearrange blockdev.h use to decrease churn. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-06qemu_ram_alloc: Add DeviceState and name parametersAlex Williamson1-2/+2
These will be used to generate unique id strings for ramblocks. The name field is required, the device pointer is optional as most callers don't have a device. When there's no device or the device isn't a child of a bus implementing BusInfo.get_dev_path, the name should be unique for the platform. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-06-27Remove useless device dependency of HAS_AUDIOBlue Swirl1-4/+0
System architecture dictates whether HAS_AUDIO is defined. It's then useless to check for HAS_AUDIO in files which are only used on those architectures which always have audio. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-13hpet/rtc: Rework RTC IRQ replacement by HPETJan Kiszka1-1/+1
Allow the intercept the RTC IRQ for the HPET legacy mode. Then push routing to IRQ8 completely into the HPET. This allows to turn hpet_in_legacy_mode() into a private function. Furthermore, this stops the RTC from clearing IRQ8 even if the HPET is in control. This patch comes with a side effect: The RTC timers will no longer be stoppend when there is no IRQ consumer, possibly causing a minor performance degration. But as the guest may want to redirect the RTC to the SCI in that mode, it should normally disable unused IRQ source anyway. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-22Compile dma only onceBlue Swirl1-1/+12
Use a qemu_irq to request CPU exit. 7 compilations less for the full build. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-15rtc: make rtc_xxx accept/return ISADevice instead of RTCState.Isaku Yamahata1-1/+2
To match rtc_xxx with qdev, make rtc_xxx accept and return ISADevice instead of RTCState. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-29Compile pflash_cfi01 only onceBlue Swirl1-1/+7
Push TARGET_WORDS_BIGENDIAN dependency to board level. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-29Compile acpi only onceBlue Swirl1-1/+2
Use qemu_irqs to trigger CMOS S3 and SMI events. Avoid using kvm.h, which uses CPUState. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-27Compile some MIPS devices only onceBlue Swirl1-0/+1
Move CPU specific declarations to a separate file. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21Compile serial only onceBlue Swirl1-1/+5
Push TARGET_WORDS_BIGENDIAN dependency to board level. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-16load_elf: replace the address addend by a translation functionAurelien Jarno1-16/+8
A few machines need to translate the ELF header addresses into physical addresses. Currently the only possibility is to add a value to the addresses. This patch replaces the addend argument by and a translation function and an opaque passed to the function. A NULL function does not translate the address. The patch also convert all machines that have an addend, simplify the PowerPC kernel loading and fix the MIPS kernel loading using this new feature. Other machines may benefit from this feature. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-02-07fdc: don't use reserved _t suffixBlue Swirl1-1/+1
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-02-06mips/malta: fix typoAurelien Jarno1-1/+1
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-01pci: pci.h cleanup: move out stuff not in pci.cMichael S. Tsirkin1-0/+2
pci.h declares some functions which aren't defined in pci.h. Clean up moving things to appropriate headers, and update all users. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2009-11-14mips malta: fix indentationAurelien Jarno1-3/+3
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-11-14mips-malta: fix resetAurelien Jarno1-25/+27
(broken by 45a50b1668822c23afc2a89f724654e176518bc4) Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-11-14mips: fix CPU resetAurelien Jarno1-4/+2
Don't load the kernel twice during reset. See f2d74978764f62d832d61ac17bb5d934ade58816. Signed-off-by: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-10-12rom loader: fix sparc -kernel boot.Gerd Hoffmann1-1/+1
Changes: (1) register pstrcpy_targphys() in rom list, it is used for kernel command lines by a number of architectures. (2) add rom_ptr() function to get a pointer for applying changes to loaded images. Needed for example to tell the linux kernel where it finds the initrd image by updating the header. (3) make sparc use rom_ptr for initrd setup. booting sparc-test works now, and 'info roms' shows this: (qemu) info roms addr=0000000000000000 size=0x2a3828 mem=ram name="phdr #0: vmlinux-2.6.11+tcx" addr=00000000007ff000 size=0x00000e mem=ram name="cmdline" addr=0000000000800000 size=0x400000 mem=ram name="/root/qemu-test/sparc-test/linux.img" addr=0000000070000000 size=0x0e4000 mem=rom name="phdr #0: /home/kraxel/projects/qemu/build-zfull/pc-bios/openbios-sparc32" reboot via 'system_reset' works too. Patchworks-ID: 35262 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-07New qdev_init_nofail()Markus Armbruster1-1/+1
Like qdev_init(), but terminate program via hw_error() instead of returning an error value. Use it instead of qdev_init() where terminating the program on failure is okay, either because it's during machine construction, or because we know that failure can't happen. Because relying in the latter is somewhat unclean, and the former is not always obvious, it would be nice to go back to qdev_init() in the not-so-obvious cases, only with proper error handling. I'm leaving that for another day, because it involves making sure that error values are properly checked by all callers. Patchworks-ID: 35168 Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05Fix pci_add nic not to exit on bad modelMarkus Armbruster1-1/+1
Monitor command "pci_add ADDR nic model=MODEL" uses pci_nic_init() to create the NIC. When MODEL is unknown or "?", this prints to stderr and terminates the program. Change pci_nic_init() not to treat "?" specially, and to return NULL on failure. Switch uses during startup to new convenience wrapper pci_nic_init_nofail(), which behaves just like pci_nic_init() used to do. Bonus bug fix: we now check for qdev_init() failing there. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05serial: convert isa to qdevGerd Hoffmann1-2/+2
Everything using standard isa I/O ports and IRQ windup is considerd being an actual isa device. That are all serial_init() users except mips_mipssim() which seems to have a non-standard IRQ windup. baud rate is fixed at 115200 now as no caller passed in something else. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05floppy: add drive properties.Gerd Hoffmann1-3/+2
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05parallel: convert isa to qdevGerd Hoffmann1-1/+1
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05i2c: addresses are load/save as uint8_t values, change types to reflect thisJuan Quintela1-1/+1
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01Revert "Get rid of _t suffix"Anthony Liguori1-12/+12
In the very least, a change like this requires discussion on the list. The naming convention is goofy and it causes a massive merge problem. Something like this _must_ be presented on the list first so people can provide input and cope with it. This reverts commit 99a0949b720a0936da2052cb9a46db04ffc6db29. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01Get rid of _t suffixmalc1-12/+12
Some not so obvious bits, slirp and Xen were left alone for the time being. Signed-off-by: malc <av1474@comtv.ru>
2009-09-21Fix Sparse warning about obsolete struct initializerBlue Swirl1-1/+1
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-20Compile loader only onceBlue Swirl1-1/+10
Callers must pass ELF machine, byte swapping and symbol LSB clearing information to ELF loader. A.out loader needs page size information, pass that too as a parameter. Extract prototypes to a separate file. Move loader.[ch] and elf_ops.h under hw. Adjust callers. Also use target_phys_addr_t instead of target_ulong for addresses: loader addresses aren't virtual. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-15mips malta: ensure that the serial ports are associated with a deviceAurelien Jarno1-0/+9
The serial ports should be present even if associated with a null device as some firmware wants to initialize them. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-09-10qdev/isa: convert real time clockGerd Hoffmann1-1/+1
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2009-09-10qdev: simplify isa irq assignmentsGerd Hoffmann1-1/+1
isa-bus owns the isa irqs now, so it can hand them out directly. There is no need for the separate isa_connect_irqs step, drop it. Also hard-code isa interrupts which can't be configured anyway. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2009-09-10qdev: drop iobase properties from isa busGerd Hoffmann1-2/+2
Lot of ISA devices work at fixed addresses, so having iobase as bus property doesn't make much sense. Devices which can have different iobases will get a device property. Also simply hard-code stuff which can't be configured anyway. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2009-09-04mips malta: Fix fdc regression and use qdev for i8042 setupStefan Weil1-8/+11
8baf73adf664e79eae201c3f618078a220a661d9 (qdev/isa: convert fdc) breaks MIPS Malta: Tried to create isa device isa-fdc with no isa bus present Fix this by creating an isa bus for piix4. This change also requires some more qdev related changes (similar changes were applied to pc.c) and allows cleaning of piix3/piix4 code. Thanks to Gerd Hoffmann for his hints. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-04ide: pass down DriveInfo instead of BlockDriverStateGerd Hoffmann1-3/+2
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27ide: split away ide-pci.cGerd Hoffmann1-0/+1
create ide-pci.c and place pci bus support there. only build ide-pci support for platforms using it. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Fix build (merge with isa mmio split)
2009-08-27isa bus irq changes and fixes.Gerd Hoffmann1-1/+1
Changes: (1) make isa-bus maintain isa irqs, complain when allocating already taken irqs. (2) note that (1) works only for isa devices converted to qdev already (floppy and ps2/kbd/mouse right now), so more work is needed to make this really useful. (3) split floppy init into isa and sysbus versions. (4) add sysbus->isa bridge & fix -M isapc breakage. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-25Make CPURead/WriteFunc structure 'const'Blue Swirl1-2/+2
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-24 00:56:40 +0000