summaryrefslogtreecommitdiff
path: root/fpu
AgeCommit message (Collapse)AuthorFilesLines
2011-06-03softfloat: add float*_is_zero_or_denormal()Aurelien Jarno1-0/+15
float*_is_zero_or_denormal() is available for float32, but not for float64, floatx80 and float128. Fix that. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-06-03softfloat: always enable floatx80 and float128 supportAurelien Jarno3-116/+0
Now that softfloat-native is gone, there is no real point on not always enabling floatx80 and float128 support. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-06-03softfloat-native: removeAurelien Jarno3-1085/+0
Remove softfloat-native support, all targets are now using softfloat instead. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-05-23softfloat: Add new flag for when denormal result is flushed to zeroPeter Maydell2-8/+36
Add a new float_flag_output_denormal which is set when the result of a floating point operation would be denormal but is flushed to zero because we are in flush_to_zero mode. This is necessary because some architectures signal this condition as an underflow and others signal it as an inexact result. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-25softfloat-native: add float*_is_any_nan() functionsAurelien Jarno2-0/+29
Add float*_is_any_nan() functions to match the softfloat API. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-25softfloat-native: fix float*_scalbn() functionsAurelien Jarno1-3/+3
float*_scalbn() should be able to take a status parameter. Fix that. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-25softfloat: fix float*_scalnb() corner casesAurelien Jarno1-5/+42
float*_scalnb() were not taking into account all cases. This patch fixes some corner cases: - NaN values in input were not properly propagated and the invalid flag not correctly raised. Use propagateFloat*NaN() for that. - NaN or infinite values in input of floatx80_scalnb() were not correctly detected due to a typo. - The sum of exponent and n could overflow, leading to strange results. Additionally having int16 defined to int make that happening for a very small range of values. Fix that by saturating n to the maximum exponent range, and using an explicit wider type if needed. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-25softfloat: add floatx80_compare*() functionsAurelien Jarno2-0/+48
Add floatx80_compare() and floatx80_compare_quiet() functions to match the softfloat-native ones. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-25softfloat-native: add a few constant valuesAurelien Jarno1-0/+27
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-25softfloat: add pi constantsAurelien Jarno1-0/+3
Add a pi constant for float32, float64, floatx80. It will be used by target-i386 and later by the trigonometric functions. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-25softfloat: add floatx80 constantsAurelien Jarno1-0/+7
Add floatx80 constants similarly to float32 or float64. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-25softfloat: fix floatx80_is_infinity()Aurelien Jarno1-1/+1
With floatx80, the explicit bit is set for infinity. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-25softfloat: fix floatx80 handling of NaNAurelien Jarno1-7/+16
The floatx80 format uses an explicit bit that should be taken into account when converting to and from commonNaN format. When converting to commonNaN, the explicit bit should be removed if it is a 1, and a default NaN should be used if it is 0. When converting from commonNan, the explicit bit should be added. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-17softfloat: improve description of comparison functionsAurelien Jarno1-37/+48
Make clear for all comparison functions which ones trigger an exception for all NaNs, and which one only for sNaNs. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-17softfloat: move float*_eq and float*_eq_quietAurelien Jarno2-59/+58
I am not a big fan of code moving, but having the signaling version in the middle of quiet versions and vice versa doesn't make the code easy to read. This patch is a simple code move, basically swapping locations of float*_eq and float*_eq_quiet. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-17softfloat: rename float*_eq_signaling() into float*_eq()Aurelien Jarno3-11/+11
float*_eq_signaling functions have a different semantics than other comparison functions. Fix that by renaming float*_quiet_signaling() into float*_eq(). Note that it is purely mechanical, and the behaviour should be unchanged. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-17softfloat: rename float*_eq() into float*_eq_quiet()Aurelien Jarno3-11/+11
float*_eq functions have a different semantics than other comparison functions. Fix that by first renaming float*_quiet() into float*_eq_quiet(). Note that it is purely mechanical, and the behaviour should be unchanged. That said it clearly highlight problems due to this different semantics, they are fixed later in this patch series. Cc: Alexander Graf <agraf@suse.de> Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-17softfloat-native: add float*_unordered_quiet() functionsAurelien Jarno1-3/+12
Add float*_unordered_quiet() functions to march the softfloat versions. As FPU status is not tracked with softfloat-native, they don't differ from the signaling version. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-17softfloat: add float*_unordered_{,quiet}() functionsAurelien Jarno2-0/+175
Add float*_unordered() functions to softfloat, matching the softfloat-native ones. Also add float*_unordered_quiet() functions to match the others comparison functions. This allow target-i386/ops_sse.h to be compiled with softfloat. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-17softfloat: use GCC builtins to count the leading zerosAurelien Jarno1-2/+27
Softfloat has its own implementation to count the leading zeros. However a lot of architectures have either a dedicated instruction or an optimized to do that. When using GCC >= 3.4, this patch uses GCC builtins instead of the handcoded implementation. Note that I amware that QEMU_GNUC_PREREQ is defined in osdep.h and that clz32() and clz64() are defined in host-utils.h, but I think it is better to keep the softfloat implementation self contained. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-12softfloat: Add setter function for tininess detection modePeter Maydell1-0/+4
Add a setter function for the underflow tininess detection mode, in line with the similar functions for other parts of the float status structure. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-12unicore32: necessary modifications for other files to support unicore32Guan Xuetao2-6/+6
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-04-03softfloat: Add float*_min() and float*_max() functionsPeter Maydell2-0/+53
Add min and max operations to softfloat. This allows us to implement propagation of NaNs and handling of negative zero correctly (unlike the approach of having target helper routines return one of the operands based on the result of a comparison op). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-03-21softfloat: Drop [s]bits{8, 16, 32, 64} types in favor of [u]int{8, 16, 32, 64}_tAndreas Färber5-432/+417
They are defined with the same semantics as the POSIX types, so prefer those for consistency. Suggested by Peter Maydell. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Andreas Färber <andreas.faerber@web.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-03-21softfloat: Resolve type mismatches between declaration and implementationAndreas Färber1-34/+34
The original SoftFloat 2.0b library avoided the use of custom integer types in its public headers. This requires the definitions of int{8,16,32,64} to match the assumptions in the declarations. This breaks on BeOS R5 and Haiku/x86, where int32 is defined in {be,os}/support/SupportDefs.h in terms of a long rather than an int. Spotted by Michael Lotz. Since QEMU already breaks this distinction by defining those types just above, do use them for consistency and to allow #ifndef'ing them out as done for [u]int16 on AIX. Cc: Michael Lotz <mmlr@mlotz.ch> Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andreas Färber <andreas.faerber@web.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-03-21softfloat: Prepend QEMU-style header with derivation noticeAndreas Färber4-0/+21
The SoftFloat license requires "prominent notice that the work is derivative". Having added features like improved 16-bit support for arm already, add such a notice to the sources. softfloat-native.[ch] are not under the SoftFloat license and thus are not changed. Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andreas Färber <andreas.faerber@web.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-02-24softfloat: add _set_sign(), _infinity and _half for 32 and 64 bits floats.Christophe Lyon1-0/+15
These constants and utility function are needed to implement some helpers. Defining constants avoids the need to re-compute them at runtime. Signed-off-by: Christophe Lyon <christophe.lyon@st.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-02-24softfloat: move all default NaN definitions to softfloat.h.Christophe Lyon2-68/+69
These special values are needed to implement some helper functions, which return/use these values in some cases. Signed-off-by: Christophe Lyon <christophe.lyon@st.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-02-10softfloat: Fix compilation failures with USE_SOFTFLOAT_STRUCT_TYPESPeter Maydell2-15/+21
Make softfloat compile with USE_SOFTFLOAT_STRUCT_TYPES defined, by adding and using new macros const_float16(), const_float32() and const_float64() so you can use array initializers in an array of float16/float32/float64 whether the types are bare or wrapped in the structs. [aurelien@aurel32.net: do the same for float16] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-02-10softfloat: Correctly handle NaNs in float16_to_float32()Peter Maydell2-3/+18
Correctly handle NaNs in float16_to_float32(), by defining and using a float16ToCommonNaN() function, as we do with the other formats. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-02-10softfloat: Fix single-to-half precision float conversionsPeter Maydell2-11/+38
Fix various bugs in the single-to-half-precision conversion code: * input NaNs not correctly converted in IEEE mode (fixed by defining and using a commonNaNToFloat16()) * wrong values returned when converting NaN/Inf into non-IEEE half precision value * wrong values returned for conversion of values which are on the boundary between denormal and zero for the half precision format * zeroes not correctly identified * excessively large results in non-IEEE mode should generate InvalidOp, not Overflow Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-02-10softfloat: Honour default_nan_mode for float-to-float conversionsChristophe Lyon2-16/+37
Honour the default_nan_mode flag when doing conversions between different floating point formats, as well as when returning a NaN from a two-operand floating point function. This corrects the behaviour of float<->double conversions on both ARM and SH4. Signed-off-by: Christophe Lyon <christophe.lyon@st.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-02-10softfloat: Add float16 type and float16 NaN handling functionsPeter Maydell3-10/+116
Add a float16 type to softfloat, rather than using bits16 directly. Also add the missing functions float16_is_quiet_nan(), float16_is_signaling_nan() and float16_maybe_silence_nan(), which are needed for the float16 conversion routines. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-20softfloat: fix floatx80_is_{quiet,signaling}_nan()Aurelien Jarno1-4/+8
floatx80_is_{quiet,signaling}_nan() functions are incorrectly detecting the type of NaN, depending on SNAN_BIT_IS_ONE, one of the two is returning the correct value, and the other true for any kind of NaN. This patch fixes that by applying the same kind of comparison as for other float formats, but taking into account the explicit bit. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-14softfloat: Add float32_is_zero_or_denormal() functionPeter Maydell1-0/+5
Add a utility function to softfloat to test whether a float32 is zero or denormal. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-14softfloat: fix default-NaN modeAurelien Jarno1-18/+18
When the default-NaN mode is enabled, it should return the default NaN value, but it should anyway raise the invalid operation flag if one of the operand is an sNaN. I have checked that this behavior matches the ARM and SH4 manuals, as well as real SH4 hardware. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-14softfloat: SH4 has the sNaN bit setAurelien Jarno1-5/+5
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-07softfloat: Implement floatx80_is_any_nan() and float128_is_any_nan()Peter Maydell1-0/+11
Implement versions of float*_is_any_nan() for the floatx80 and float128 types. Acked-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
2011-01-06softfloat: Implement flushing input denormals to zeroPeter Maydell2-3/+123
Add support to softfloat for flushing input denormal float32 and float64 to zero. softfloat's existing 'flush_to_zero' flag only flushes denormals to zero on output. Some CPUs need input denormals to be flushed before processing as well. Implement this, using a new status flag to enable it and a new exception status bit to indicate when it has happened. Existing CPUs should be unaffected as there is no behaviour change unless the mode is enabled. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-06target-ppc: Implement correct NaN propagation rulesAurelien Jarno1-2/+17
Implement the correct NaN propagation rules for PowerPC targets by providing an appropriate pickNaN function. Also fix the #ifdef tests for default NaN definition, the correct name is TARGET_PPC instead of TARGET_POWERPC. Reviewed-by: Nathan Froyd <froydnj@codesourcery.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-06target-mips: Implement correct NaN propagation rulesAurelien Jarno1-0/+27
Implement the correct NaN propagation rules for MIPS targets by providing an appropriate pickNaN function. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-06softfloat: use float{32,64,x80,128}_maybe_silence_nan()Aurelien Jarno1-43/+16
Use float{32,64,x80,128}_maybe_silence_nan() instead of toggling the sNaN bit manually. This allow per target implementation of sNaN to qNaN conversion. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2011-01-06softfloat: add float{x80,128}_maybe_silence_nan()Aurelien Jarno2-0/+48
Add float{x80,128}_maybe_silence_nan() functions, they will be need by propagateFloat{x80,128}NaN(). Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-06softfloat: fix float{32,64}_maybe_silence_nan() for MIPSAurelien Jarno1-6/+14
On targets that define sNaN with the sNaN bit as one, simply clearing this bit may correspond to an infinite value. Convert it to a default NaN if SNAN_BIT_IS_ONE, as it corresponds to the MIPS implementation, the only emulated CPU with SNAN_BIT_IS_ONE. When other CPU of this type are added, this might be updated to include more cases. Acked-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-06softfloat: rename *IsNaN variables to *IsQuietNaNAurelien Jarno1-16/+20
Similarly to what has been done in commit 185698715dfb18c82ad2a5dbc169908602d43e81 rename the misnamed *IsNaN variables into *IsQuietNaN. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-06softfloat: remove HPPA specific codeAurelien Jarno1-5/+1
We don't have any HPPA target, so let's remove HPPA specific code. It can be re-added when someone adds an HPPA target. This has been blessed by Stuart Brady <sdb@zubnet.me.uk>, author of the target-hppa fork. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-02target-arm: Implement correct NaN propagation rulesPeter Maydell1-0/+23
Implement the correct NaN propagation rules for ARM targets by providing an appropriate pickNaN function. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-02softfloat: abstract out target-specific NaN propagation rulesPeter Maydell1-60/+100
IEEE754 doesn't specify precisely what NaN should be returned as the result of an operation on two input NaNs. This is therefore target-specific. Abstract out the code in propagateFloat*NaN() which was implementing the x87 propagation rules, so that it can be easily replaced on a per-target basis. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-02softfloat: Rename float*_is_nan() functions to float*_is_quiet_nan()Peter Maydell4-22/+22
The softfloat functions float*_is_nan() were badly misnamed, because they return true only for quiet NaNs, not for all NaNs. Rename them to float*_is_quiet_nan() to more accurately reflect what they do. This change was produced by: perl -p -i -e 's/_is_nan/_is_quiet_nan/g' $(git grep -l is_nan) (with the results manually checked.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Nathan Froyd <froydnj@codesourcery.com> Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-12-07softfloat: Add float/double to 16 bit integer conversion functionsPeter Maydell2-0/+140
The ARM architecture needs float/double to 16 bit integer conversions. (The 32 bit versions aren't sufficient because of the requirement to saturate at 16 bit MAXINT/MININT and to get the exception bits right.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Nathan Froyd <froydnj@codesourcery.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-27 14:31:50 +0000