summaryrefslogtreecommitdiff
path: root/block/nbd-client.h
AgeCommit message (Collapse)AuthorFilesLines
2016-11-02nbd: Implement NBD_CMD_WRITE_ZEROES on clientEric Blake1-0/+2
Upstream NBD protocol recently added the ability to efficiently write zeroes without having to send the zeroes over the wire, along with a flag to control whether the client wants a hole. The generic block code takes care of falling back to the obvious write of lots of zeroes if we return -ENOTSUP because the server does not have WRITE_ZEROES. Ideally, since NBD_CMD_WRITE_ZEROES does not involve any data over the wire, we want to support transactions that are much larger than the normal 32M limit imposed on NBD_CMD_WRITE. But the server may still have a limit smaller than UINT_MAX, so until experimental NBD protocol additions for advertising various command sizes is finalized (see [1], [2]), for now we just stick to the same limits as normal writes. [1] https://github.com/yoe/nbd/blob/extension-info/doc/proto.md [2] https://sourceforge.net/p/nbd/mailman/message/35081223/ Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1476469998-28592-17-git-send-email-eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-11-02nbd: Rename struct nbd_request and nbd_replyEric Blake1-1/+1
Our coding convention prefers CamelCase names, and we already have other existing structs with NBDFoo naming. Let's be consistent, before later patches add even more structs. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1476469998-28592-6-git-send-email-eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-11-02nbd: Rename NbdClientSession to NBDClientSessionEric Blake1-3/+3
It's better to use consistent capitalization of the namespace used for NBD functions; we have more instances of NBD* than Nbd*. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1476469998-28592-5-git-send-email-eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-11-01nbd: Use CoQueue for free_sema instead of CoMutexChanglong Xie1-1/+1
NBD is using the CoMutex in a way that wasn't anticipated. For example, if there are N(N=26, MAX_NBD_REQUESTS=16) nbd write requests, so we will invoke nbd_client_co_pwritev N times. ---------------------------------------------------------------------------------------- time request Actions 1 1 in_flight=1, Coroutine=C1 2 2 in_flight=2, Coroutine=C2 ... 15 15 in_flight=15, Coroutine=C15 16 16 in_flight=16, Coroutine=C16, free_sema->holder=C16, mutex->locked=true 17 17 in_flight=16, Coroutine=C17, queue C17 into free_sema->queue 18 18 in_flight=16, Coroutine=C18, queue C18 into free_sema->queue ... 26 N in_flight=16, Coroutine=C26, queue C26 into free_sema->queue ---------------------------------------------------------------------------------------- Once nbd client recieves request No.16' reply, we will re-enter C16. It's ok, because it's equal to 'free_sema->holder'. ---------------------------------------------------------------------------------------- time request Actions 27 16 in_flight=15, Coroutine=C16, free_sema->holder=C16, mutex->locked=false ---------------------------------------------------------------------------------------- Then nbd_coroutine_end invokes qemu_co_mutex_unlock what will pop coroutines from free_sema->queue's head and enter C17. More free_sema->holder is C17 now. ---------------------------------------------------------------------------------------- time request Actions 28 17 in_flight=16, Coroutine=C17, free_sema->holder=C17, mutex->locked=true ---------------------------------------------------------------------------------------- In above scenario, we only recieves request No.16' reply. As time goes by, nbd client will almostly recieves replies from requests 1 to 15 rather than request 17 who owns C17. In this case, we will encounter assert "mutex->holder == self" failed since Kevin's commit 0e438cdc "coroutine: Let CoMutex remember who holds it". For example, if nbd client recieves request No.15' reply, qemu will stop unexpectedly: ---------------------------------------------------------------------------------------- time request Actions 29 15(most case) in_flight=15, Coroutine=C15, free_sema->holder=C17, mutex->locked=false ---------------------------------------------------------------------------------------- Per Paolo's suggestion "The simplest fix is to change it to CoQueue, which is like a condition variable", this patch replaces CoMutex with CoQueue. Cc: Wen Congyang <wency@cn.fujitsu.com> Reported-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com> Message-Id: <1476267508-19499-1-git-send-email-xiecl.fnst@cn.fujitsu.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-08-03nbd: Limit nbdflags to 16 bitsEric Blake1-1/+1
Rather than asserting that nbdflags is within range, just give it the correct type to begin with :) nbdflags corresponds to the per-export portion of NBD Protocol "transmission flags", which is 16 bits in response to NBD_OPT_EXPORT_NAME and NBD_OPT_GO. Furthermore, upstream NBD has never passed the global flags to the kernel via ioctl(NBD_SET_FLAGS) (the ioctl was first introduced in NBD 2.9.22; then a latent bug in NBD 3.1 actually tried to OR the global flags with the transmission flags, with the disaster that the addition of NBD_FLAG_NO_ZEROES in 3.9 caused all earlier NBD 3.x clients to treat every export as read-only; NBD 3.10 and later intentionally clip things to 16 bits to pass only transmission flags). Qemu should follow suit, since the current two global flags (NBD_FLAG_FIXED_NEWSTYLE and NBD_FLAG_NO_ZEROES) have no impact on the kernel's behavior during transmission. CC: qemu-stable@nongnu.org Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1469129688-22848-3-git-send-email-eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-07-20nbd: Convert to byte-based interfaceEric Blake1-4/+4
The NBD protocol doesn't have any notion of sectors, so it is a fairly easy conversion to use byte-based read and write. Signed-off-by: Eric Blake <eblake@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1468624988-423-19-git-send-email-eblake@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-20nbd: Switch .bdrv_co_discard() to byte-basedEric Blake1-2/+1
Another step towards killing off sector-based block APIs. While at it, call directly into nbd-client.c instead of having a pointless trivial wrapper in nbd.c. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1468624988-423-14-git-send-email-eblake@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-05-12nbd: Simplify client FUA handlingEric Blake1-1/+1
Now that the block layer honors per-bds FUA support, we don't have to duplicate the fallback flush at the NBD layer. The static function nbd_co_writev_flags() is no longer needed, and the driver can just directly use nbd_client_co_writev(). Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-30nbd: Support BDRV_REQ_FUAKevin Wolf1-1/+1
The NBD server already used to send a FUA flag when the writethrough mode was set. This code was a remnant from the times where protocol drivers actually had to implement writethrough modes. Since nowadays the block layer sends flushes in writethrough mode and non-root nodes are always writeback, this was mostly dead code - only mostly because if NBD was configured to be used without a format, we sent _both_ FUA and an explicit flush afterwards, which makes the code not technically dead, but useless overhead. This patch changes the code so that the block layer's FUA flag is recognised and translated into a NBD FUA flag. The additional flush is avoided now. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-02-16nbd: enable use of TLS with NBD block driverDaniel P. Berrange1-0/+2
This modifies the NBD driver so that it is possible to request use of TLS. This is done by providing the 'tls-creds' parameter with the ID of a previously created QCryptoTLSCreds object. For example $QEMU -object tls-creds-x509,id=tls0,endpoint=client,\ dir=/home/berrange/security/qemutls \ -drive driver=nbd,host=localhost,port=9000,tls-creds=tls0 The client will drop the connection if the NBD server does not provide TLS. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1455129674-17255-15-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-16nbd: convert block client to use I/O channels for connection setupDaniel P. Berrange1-2/+6
This converts the NBD block driver client to use the QIOChannelSocket class for initial connection setup. The NbdClientSession struct has two pointers, one to the master QIOChannelSocket providing the raw data channel, and one to a QIOChannel which is the current channel used for I/O. Initially the two point to the same object, but when TLS support is added, they will point to different objects. The qemu-img & qemu-io tools now need to use MODULE_INIT_QOM to ensure the QIOChannel object classes are registered. The qemu-nbd tool already did this. In this initial conversion though, all I/O is still actually done using the raw POSIX sockets APIs. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1455129674-17255-4-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-03-18nbd: Set block size to BDRV_SECTOR_SIZEMax Reitz1-1/+0
Signed-off-by: Max Reitz <mreitz@redhat.com> Message-Id: <1424887718-10800-13-git-send-email-mreitz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-02-16nbd: Drop BDS backpointerMax Reitz1-17/+17
Before this patch, the "opaque" pointer in an NBD BDS points to a BDRVNBDState, which contains an NbdClientSession object, which in turn contains a pointer to the BDS. This pointer may become invalid due to bdrv_swap(), so drop it, and instead pass the BDS directly to the nbd-client.c functions which then retrieve the NbdClientSession object from there. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1423256778-3340-2-git-send-email-mreitz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-06nbd: Improve error messagesMax Reitz1-1/+1
This patch makes use of the Error object for nbd_receive_negotiate() so that errors during negotiation look nicer. Furthermore, this patch adds an additional error message if the received magic was wrong, but would be correct for the other protocol version, respectively: So if an export name was specified, but the NBD server magic corresponds to an old handshake, this condition is explicitly signaled to the user, and vice versa. As these messages are now part of the "Could not open image" error message, additional filtering has to be employed in iotest 083, which this patch does as well. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-06-04nbd: implement .bdrv_detach/attach_aio_context()Stefan Hajnoczi1-0/+4
Drop the assumption that we're using the main AioContext. Convert qemu_aio_set_fd_handler() calls to aio_set_fd_handler(). The .bdrv_detach/attach_aio_context() interfaces also need to be implemented to move the socket fd handler from the old to the new AioContext. Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-12-16nbd: pass export name as init argumentMarc-André Lureau1-3/+2
There is no need to keep the export name around, and it seems a better fit as an argument in the init() call. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-16Split nbd block client codeMarc-André Lureau1-0/+51
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-26 07:13:40 +0000