diff options
Diffstat (limited to 'hw/esp.h')
| -rw-r--r-- | hw/esp.h | 119 |
1 files changed, 119 insertions, 0 deletions
@@ -1,6 +1,8 @@ #ifndef QEMU_HW_ESP_H #define QEMU_HW_ESP_H +#include "scsi.h" + /* esp.c */ #define ESP_MAX_DEVS 7 typedef void (*ESPDMAMemoryReadWriteFunc)(void *opaque, uint8_t *buf, int len); @@ -10,4 +12,121 @@ void esp_init(target_phys_addr_t espaddr, int it_shift, void *dma_opaque, qemu_irq irq, qemu_irq *reset, qemu_irq *dma_enable); +#define ESP_REGS 16 +#define TI_BUFSZ 16 + +typedef struct ESPState ESPState; + +struct ESPState { + uint8_t rregs[ESP_REGS]; + uint8_t wregs[ESP_REGS]; + qemu_irq irq; + uint8_t chip_id; + int32_t ti_size; + uint32_t ti_rptr, ti_wptr; + uint32_t status; + uint32_t dma; + uint8_t ti_buf[TI_BUFSZ]; + SCSIBus bus; + SCSIDevice *current_dev; + SCSIRequest *current_req; + uint8_t cmdbuf[TI_BUFSZ]; + uint32_t cmdlen; + uint32_t do_cmd; + + /* The amount of data left in the current DMA transfer. */ + uint32_t dma_left; + /* The size of the current DMA transfer. Zero if no transfer is in + progress. */ + uint32_t dma_counter; + int dma_enabled; + + uint32_t async_len; + uint8_t *async_buf; + + ESPDMAMemoryReadWriteFunc dma_memory_read; + ESPDMAMemoryReadWriteFunc dma_memory_write; + void *dma_opaque; + void (*dma_cb)(ESPState *s); +}; + +#define ESP_TCLO 0x0 +#define ESP_TCMID 0x1 +#define ESP_FIFO 0x2 +#define ESP_CMD 0x3 +#define ESP_RSTAT 0x4 +#define ESP_WBUSID 0x4 +#define ESP_RINTR 0x5 +#define ESP_WSEL 0x5 +#define ESP_RSEQ 0x6 +#define ESP_WSYNTP 0x6 +#define ESP_RFLAGS 0x7 +#define ESP_WSYNO 0x7 +#define ESP_CFG1 0x8 +#define ESP_RRES1 0x9 +#define ESP_WCCF 0x9 +#define ESP_RRES2 0xa +#define ESP_WTEST 0xa +#define ESP_CFG2 0xb +#define ESP_CFG3 0xc +#define ESP_RES3 0xd +#define ESP_TCHI 0xe +#define ESP_RES4 0xf + +#define CMD_DMA 0x80 +#define CMD_CMD 0x7f + +#define CMD_NOP 0x00 +#define CMD_FLUSH 0x01 +#define CMD_RESET 0x02 +#define CMD_BUSRESET 0x03 +#define CMD_TI 0x10 +#define CMD_ICCS 0x11 +#define CMD_MSGACC 0x12 +#define CMD_PAD 0x18 +#define CMD_SATN 0x1a +#define CMD_RSTATN 0x1b +#define CMD_SEL 0x41 +#define CMD_SELATN 0x42 +#define CMD_SELATNS 0x43 +#define CMD_ENSEL 0x44 +#define CMD_DISSEL 0x45 + +#define STAT_DO 0x00 +#define STAT_DI 0x01 +#define STAT_CD 0x02 +#define STAT_ST 0x03 +#define STAT_MO 0x06 +#define STAT_MI 0x07 +#define STAT_PIO_MASK 0x06 + +#define STAT_TC 0x10 +#define STAT_PE 0x20 +#define STAT_GE 0x40 +#define STAT_INT 0x80 + +#define BUSID_DID 0x07 + +#define INTR_FC 0x08 +#define INTR_BS 0x10 +#define INTR_DC 0x20 +#define INTR_RST 0x80 + +#define SEQ_0 0x0 +#define SEQ_CD 0x4 + +#define CFG1_RESREPT 0x40 + +#define TCHI_FAS100A 0x4 +#define TCHI_AM53C974 0x12 + +void esp_dma_enable(ESPState *s, int irq, int level); +void esp_request_cancelled(SCSIRequest *req); +void esp_command_complete(SCSIRequest *req, uint32_t status, size_t resid); +void esp_transfer_data(SCSIRequest *req, uint32_t len); +void esp_hard_reset(ESPState *s); +uint64_t esp_reg_read(ESPState *s, uint32_t saddr); +void esp_reg_write(ESPState *s, uint32_t saddr, uint64_t val); +extern const VMStateDescription vmstate_esp; + #endif |