diff options
| -rw-r--r-- | default-configs/unicore32-softmmu.mak | 1 | ||||
| -rw-r--r-- | hw/Makefile.objs | 1 | ||||
| -rw-r--r-- | hw/puv3.c | 3 | ||||
| -rw-r--r-- | hw/puv3_ost.c | 151 |
4 files changed, 156 insertions, 0 deletions
diff --git a/default-configs/unicore32-softmmu.mak b/default-configs/unicore32-softmmu.mak index 726a338c23..4d4fbfc8cd 100644 --- a/default-configs/unicore32-softmmu.mak +++ b/default-configs/unicore32-softmmu.mak @@ -1,2 +1,3 @@ # Default configuration for unicore32-softmmu CONFIG_PUV3=y +CONFIG_PTIMER=y diff --git a/hw/Makefile.objs b/hw/Makefile.objs index 278070fb22..583dd6d43b 100644 --- a/hw/Makefile.objs +++ b/hw/Makefile.objs @@ -68,6 +68,7 @@ hw-obj-$(CONFIG_XILINX_AXI) += xilinx_axienet.o # PKUnity SoC devices hw-obj-$(CONFIG_PUV3) += puv3_intc.o +hw-obj-$(CONFIG_PUV3) += puv3_ost.o # PCI watchdog devices hw-obj-$(CONFIG_PCI) += wdt_i6300esb.o @@ -46,6 +46,9 @@ static void puv3_soc_init(CPUUniCore32State *env) for (i = 0; i < PUV3_IRQS_NR; i++) { irqs[i] = qdev_get_gpio_in(dev, i); } + + /* Initialize minimal necessary devices for kernel booting */ + sysbus_create_simple("puv3_ost", PUV3_OST_BASE, irqs[PUV3_IRQS_OST0]); } static void puv3_board_init(CPUUniCore32State *env, ram_addr_t ram_size) diff --git a/hw/puv3_ost.c b/hw/puv3_ost.c new file mode 100644 index 0000000000..dd30cad0e2 --- /dev/null +++ b/hw/puv3_ost.c @@ -0,0 +1,151 @@ +/* + * OSTimer device simulation in PKUnity SoC + * + * Copyright (C) 2010-2012 Guan Xuetao + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation, or any later version. + * See the COPYING file in the top-level directory. + */ +#include "sysbus.h" +#include "ptimer.h" + +#undef DEBUG_PUV3 +#include "puv3.h" + +/* puv3 ostimer implementation. */ +typedef struct { + SysBusDevice busdev; + MemoryRegion iomem; + QEMUBH *bh; + qemu_irq irq; + ptimer_state *ptimer; + + uint32_t reg_OSMR0; + uint32_t reg_OSCR; + uint32_t reg_OSSR; + uint32_t reg_OIER; +} PUV3OSTState; + +static uint64_t puv3_ost_read(void *opaque, target_phys_addr_t offset, + unsigned size) +{ + PUV3OSTState *s = opaque; + uint32_t ret = 0; + + switch (offset) { + case 0x10: /* Counter Register */ + ret = s->reg_OSMR0 - (uint32_t)ptimer_get_count(s->ptimer); + break; + case 0x14: /* Status Register */ + ret = s->reg_OSSR; + break; + case 0x1c: /* Interrupt Enable Register */ + ret = s->reg_OIER; + break; + default: + DPRINTF("Bad offset %x\n", (int)offset); + } + DPRINTF("offset 0x%x, value 0x%x\n", offset, ret); + return ret; +} + +static void puv3_ost_write(void *opaque, target_phys_addr_t offset, + uint64_t value, unsigned size) +{ + PUV3OSTState *s = opaque; + + DPRINTF("offset 0x%x, value 0x%x\n", offset, value); + switch (offset) { + case 0x00: /* Match Register 0 */ + s->reg_OSMR0 = value; + if (s->reg_OSMR0 > s->reg_OSCR) { + ptimer_set_count(s->ptimer, s->reg_OSMR0 - s->reg_OSCR); + } else { + ptimer_set_count(s->ptimer, s->reg_OSMR0 + + (0xffffffff - s->reg_OSCR)); + } + ptimer_run(s->ptimer, 2); + break; + case 0x14: /* Status Register */ + assert(value == 0); + if (s->reg_OSSR) { + s->reg_OSSR = value; + qemu_irq_lower(s->irq); + } + break; + case 0x1c: /* Interrupt Enable Register */ + s->reg_OIER = value; + break; + default: + DPRINTF("Bad offset %x\n", (int)offset); + } +} + +static const MemoryRegionOps puv3_ost_ops = { + .read = puv3_ost_read, + .write = puv3_ost_write, + .impl = { + .min_access_size = 4, + .max_access_size = 4, + }, + .endianness = DEVICE_NATIVE_ENDIAN, +}; + +static void puv3_ost_tick(void *opaque) +{ + PUV3OSTState *s = opaque; + + DPRINTF("ost hit when ptimer counter from 0x%x to 0x%x!\n", + s->reg_OSCR, s->reg_OSMR0); + + s->reg_OSCR = s->reg_OSMR0; + if (s->reg_OIER) { + s->reg_OSSR = 1; + qemu_irq_raise(s->irq); + } +} + +static int puv3_ost_init(SysBusDevice *dev) +{ + PUV3OSTState *s = FROM_SYSBUS(PUV3OSTState, dev); + + s->reg_OIER = 0; + s->reg_OSSR = 0; + s->reg_OSMR0 = 0; + s->reg_OSCR = 0; + + sysbus_init_irq(dev, &s->irq); + + s->bh = qemu_bh_new(puv3_ost_tick, s); + s->ptimer = ptimer_init(s->bh); + ptimer_set_freq(s->ptimer, 50 * 1000 * 1000); + + memory_region_init_io(&s->iomem, &puv3_ost_ops, s, "puv3_ost", + PUV3_REGS_OFFSET); + sysbus_init_mmio(dev, &s->iomem); + + return 0; +} + +static void puv3_ost_class_init(ObjectClass *klass, void *data) +{ + SysBusDeviceClass *sdc = SYS_BUS_DEVICE_CLASS(klass); + + sdc->init = puv3_ost_init; +} + +static const TypeInfo puv3_ost_info = { + .name = "puv3_ost", + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(PUV3OSTState), + .class_init = puv3_ost_class_init, +}; + +static void puv3_ost_register_type(void) +{ + type_register_static(&puv3_ost_info); +} + +type_init(puv3_ost_register_type) |