Initial commitHEADsubmit/tizen_common/20150126.093738submit/tizen_3.0_common/20161104.104000submit/2.0alpha/20130201.222745accepted/tizen/common/20150126.100451accepted/tizen/3.0/common/20161114.112238accepted/2.0alpha/20130201.222208tizen_3.0.m2tizen_3.0.2015.q2_commontizen_3.0.2014.q4_commonaccepted/tizen_commonaccepted/tizen_3.0_common2.0alpha

1 files changed, 197 insertions, 0 deletions

diff --git a/eeprom/decode-xeon b/eeprom/decode-xeon
new file mode 100755
index 0000000..8a400b9
--- /dev/null
+++ b/eeprom/decode-xeon
@@ -0,0 +1,197 @@
+#!/usr/bin/perl
+#
+# Copyright 1998, 1999 Philip Edelbrock <phil@netroedge.com>
+# and Mark Studebaker <mdsxyz123@yahoo.com>
+#
+# Version 0.1
+#
+#
+# ID ROM data decoding for Xeon processors. 
+# Each Xeon processor contains two memories:
+#	- A scratch EEPROM at an even location 0x50, 52, 54, or 56;
+#	- An ID ROM at an odd location 0x51, 53, 55, or 57.
+# This program decodes the ID ROM's only.
+# The scratch EEPROMs have no prescribed format.
+# If the output of this program makes no sense for a particular device,
+# it is probably decoding a DIMM Serial Presence Detect (SPD) EEPROM.
+# See decode-dimms to decode those devices.
+#
+#
+# The eeprom driver must be loaded. For kernels older than 2.6.0, the
+# eeprom driver can be found in the lm-sensors package.
+#
+# To do:
+#	Calculate and check checksums for each section
+#	Decode flags in byte 0x7B (cartridge feature flags)
+#
+# References: 
+# "Pentium II Xeon Processor at 400 and 450 MHz" Data Sheet
+# Intel 
+#
+#
+#
+
+print "Xeon Processor Information ROM Decoder\n";
+print "Written by Philip Edelbrock and Mark Studebaker.  Copyright 1998, 1999.\n";
+print "Version 2.6.3\n\n";
+
+$dimm_count=0;
+$_=`ls /proc/sys/dev/sensors/`;
+@dimm_list=split();
+
+for $i ( 0 .. $#dimm_list ) {
+	$_=$dimm_list[$i];
+	if ((/^eeprom-/) && (/-51$/ || /-53$/ || /-55$/ || /-57$/)) {
+		$dimm_count=$dimm_count + 1;
+		
+		print "\nDecoding Xeon ROM: /proc/sys/dev/sensors/$dimm_list[$i]\n";
+		if (/^[^-]+-[^-]+-[^-]+-([^-]+)$/) {
+			$dimm_num=($1 - 49) / 2;
+			print "Guessing Xeon is number $dimm_num\n";
+		}
+# Decode first 16 bytes
+		print "\t\t----=== Xeon ROM Header Data ===----\n";
+
+		$_=`cat /proc/sys/dev/sensors/$dimm_list[$i]/00`;
+		@bytes=split(" ");
+		
+		printf("\tData Format Revision: \t\t\t\t0x%.4X\n", $bytes[0]);
+
+		print "\tTotal number of bytes in EEPROM:\t\t";
+		print ($bytes[1] << 4) + $bytes[2];
+		print "\n";
+
+		printf("\tProcessor Data Address:\t\t\t\t0x%.2X\n", $bytes[3]);
+		printf("\tProcessor Core Data Address:\t\t\t0x%.2X\n", $bytes[4]);
+		printf("\tL2 Cache Data Address:\t\t\t\t0x%.2X\n", $bytes[5]);
+		printf("\tSEC Cartridge Data Address:\t\t\t0x%.2X\n", $bytes[6]);
+		printf("\tPart Number Data Address:\t\t\t0x%.2X\n", $bytes[7]);
+		printf("\tThermal Reference Data Address:\t\t\t0x%.2X\n", $bytes[8]);
+		printf("\tFeature Data Address:\t\t\t\t0x%.2X\n", $bytes[9]);
+		printf("\tOther Data Address:\t\t\t\t0x%.2X\n", $bytes[10]);
+		
+		print "\t\t----=== Xeon ROM Processor Data ===----\n";
+		
+# Decode next 16 bytes
+		$_=`cat /proc/sys/dev/sensors/$dimm_list[$i]/10`;
+		@bbytes=split(" ");
+	      	print "\tS-spec/QDF Number:\t\t\t\t\"";
+		print pack("cccccc",$bytes[14],$bytes[15],$bbytes[0],
+    				    $bbytes[1],$bbytes[2],$bbytes[3]);
+		print "\"\n";
+		$tmp =  $bbytes[4] & 0xC0 >> 6;
+		printf("\tSample / Production:\t\t\t\t0x%.2X", $tmp);
+		if($tmp) {
+			print " (Production)\n";
+		} else {
+			print " (Sample)\n";
+		}
+
+		print "\t\t----=== Xeon ROM Core Data ===----\n";
+		
+		printf("\tProcessor Core Type:\t\t\t\t0x%.2X\n",
+			($bbytes[6] & 0xC0) >> 6);
+		printf("\tProcessor Core Family:\t\t\t\t0x%.2X\n",
+			($bbytes[6] & 0x3C) >> 2);
+		printf("\tProcessor Core Model:\t\t\t\t0x%.2X\n",
+			(($bbytes[6] & 0x03) << 2) + (($bbytes[7] & 0xC0) >> 6));
+		printf("\tProcessor Core Stepping:\t\t\t0x%.2X\n",
+			($bbytes[7] & 0x30) >> 4);
+		print "\tMaximum Core Frequency (Mhz):\t\t\t";
+		print ($bbytes[13] << 4) + $bbytes[14];
+		print "\n";
+		
+# Decode next 16 bytes (32-47)
+		$_=`cat /proc/sys/dev/sensors/$dimm_list[$i]/20`;
+		@bytes=split(" ");
+		print "\tCore Voltage ID (mV):\t\t\t\t";
+		print ($bbytes[15] << 4) + $bytes[0];
+		print "\n";
+		print "\tCore Voltage Tolerance, High (mV):\t\t";
+		print $bytes[1];
+		print "\n";
+		print "\tCore Voltage Tolerance, Low (mV):\t\t";
+		print $bytes[2];
+		print "\n";
+
+		print "\t\t----=== Xeon ROM L2 Cache Data ===----\n";
+		
+		print "\tL2 Cache Size (KB):\t\t\t\t";
+		print ($bytes[9] << 4) + $bytes[10];
+		print "\n";
+		printf("\tNumber of SRAM Components:\t\t\t%d\n",
+			($bytes[11] & 0xF0) >> 4);
+		print "\tL2 Cache Voltage ID (mV):\t\t\t";
+		print ($bytes[12] << 4) + $bytes[13];
+		print "\n";
+		print "\tL2 Cache Voltage Tolerance, High (mV):\t\t";
+		print $bytes[14];
+		print "\n";
+		print "\tL2 Cache Voltage Tolerance, Low (mV):\t\t";
+		print $bytes[15];
+		print "\n";
+
+# Decode next 16 bytes (48-63)
+		$_=`cat /proc/sys/dev/sensors/$dimm_list[$i]/30`;
+		@bytes=split(" ");
+
+		printf("\tCache/Tag Stepping ID:\t\t\t\t0x%.2X\n",
+			($bytes[0] & 0xF0) >> 4);
+
+		print "\t\t----=== Xeon ROM Cartridge Data ===----\n";
+
+	      	print "\tCartridge Revision:\t\t\t\t\"";
+		print pack("cccc",$bytes[2],$bytes[3],$bytes[4],$bytes[5]);
+		print "\"\n";
+		printf("\tSubstrate Rev. Software ID:\t\t\t0x%.2X\n",
+			($bbytes[6] & 0xC0) >> 6);
+
+		print "\t\t----=== Xeon ROM Part Number Data ===----\n";
+
+	      	print "\tProcessor Part Number:\t\t\t\t\"";
+		print pack("ccccccc",$bytes[8],$bytes[9],$bytes[10],
+  			    $bytes[11],$bytes[12],$bytes[13],$bytes[14]);
+		print "\"\n";
+		$byte15=$byte[15];
+
+# Decode next 16 bytes (64-79)
+		$_=`cat /proc/sys/dev/sensors/$dimm_list[$i]/40`;
+		@bytes=split(" ");
+
+	      	print "\tProcessor BOM ID:\t\t\t\t\"";
+		print pack("cccccccccccccc",$byte15,$bytes[0],$bytes[1],
+			$bytes[2],$bytes[3],$bytes[4],$bytes[5],$bytes[6],
+			$bytes[7],$bytes[8],$bytes[9],$bytes[10],$bytes[11],
+			$bytes[12]);
+		print "\"\n";
+
+# Decode next 16 bytes (80-95)
+		$_=`cat /proc/sys/dev/sensors/$dimm_list[$i]/50`;
+		@bbytes=split(" ");
+		printf("\tProcessor Electronic Signature: \t\t0x%.2X%.2X%.2X%.2X%.2X%.2X%.2X%.2X\n",
+			$bytes[13],$bytes[14],$bytes[15],$bbytes[0],
+			$bbytes[1],$bbytes[2],$bbytes[3],$bbytes[4]);
+
+# Decode next 16 bytes (96-111)
+# Not used...   
+
+# Decode next 16 bytes (112-127)
+		$_=`cat /proc/sys/dev/sensors/$dimm_list[$i]/70`;
+		@bytes=split(" ");
+		
+		print "\t\t----=== Xeon Thermal Reference Data ===----\n";
+
+		printf("\tThermal Reference Byte: \t\t\t0x%.2X\n", $bytes[0]);
+
+		print "\t\t----=== Xeon ROM Feature Data ===----\n";
+
+		printf("\tProcessor Core Feature Flags: \t\t\t0x%.2X%.2X%.2X%.2X\n",
+			$bytes[4],$bytes[5],$bytes[6],$bytes[7]);
+		printf("\tCartridge Feature Flags: \t\t\t0x%.2X%.2X%.2X%.2X\n",
+			$bytes[8],$bytes[9],$bytes[10],$bytes[11]);
+		printf("\tNumber of Devices in TAP Chain:\t\t\t%d\n",
+			($bytes[12] & 0xF0) >> 4);
+		
+	}
+}
+print "\n\nNumber of Xeon ROMs detected and decoded: $dimm_count\n";