Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull "ARM: global cleanups" from Arnd Bergmann:
 "Quite a bit of code gets removed, and some stuff moved around, mostly
  the old samsung s3c24xx stuff.  There should be no functional changes
  in this series otherwise.  Some cleanups have dependencies on other
  arm-soc branches and will be sent in the second round.

  Signed-off-by: Arnd Bergmann <arnd@arndb.de>"

Fixed up trivial conflicts mainly due to #include's being changes on
both sides.

* tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (121 commits)
  ep93xx: Remove unnecessary includes of ep93xx-regs.h
  ep93xx: Move EP93XX_SYSCON defines to SoC private header
  ep93xx: Move crunch code to mach-ep93xx directory
  ep93xx: Make syscon access functions private to SoC
  ep93xx: Configure GPIO ports in core code
  ep93xx: Move peripheral defines to local SoC header
  ep93xx: Convert the watchdog driver into a platform device.
  ep93xx: Use ioremap for backlight driver
  ep93xx: Move GPIO defines to gpio-ep93xx.h
  ep93xx: Don't use system controller defines in audio drivers
  ep93xx: Move PHYS_BASE defines to local SoC header file
  ARM: EXYNOS: Add clock register addresses for EXYNOS4X12 bus devfreq driver
  ARM: EXYNOS: add clock registers for exynos4x12-cpufreq
  PM / devfreq: update the name of EXYNOS clock registers that were omitted
  PM / devfreq: update the name of EXYNOS clock register
  ARM: EXYNOS: change the prefix S5P_ to EXYNOS4_ for clock
  ARM: EXYNOS: use static declaration on regarding clock
  ARM: EXYNOS: replace clock.c for other new EXYNOS SoCs
  ARM: OMAP2+: Fix build error after merge
  ARM: S3C24XX: remove call to s3c24xx_setup_clocks
  ...

23 files changed, 667 insertions, 892 deletions

diff --git a/drivers/char/hw_random/omap-rng.c b/drivers/char/hw_random/omap-rng.c
index b757fac3cd1f..a07a5caa599c 100644
--- a/drivers/char/hw_random/omap-rng.c
+++ b/drivers/char/hw_random/omap-rng.c
@@ -26,6 +26,8 @@
 
 #include <asm/io.h>
 
+#include <plat/cpu.h>
+
 #define RNG_OUT_REG		0x00		/* Output register */
 #define RNG_STAT_REG		0x04		/* Status register
 							[0] = STAT_BUSY */
diff --git a/drivers/devfreq/exynos4_bus.c b/drivers/devfreq/exynos4_bus.c
index 1a361e99965a..88ddc77a9bb1 100644
--- a/drivers/devfreq/exynos4_bus.c
+++ b/drivers/devfreq/exynos4_bus.c
@@ -311,51 +311,51 @@ static int exynos4210_set_busclk(struct busfreq_data *data, struct opp *opp)
 	/* Change Divider - DMC0 */
 	tmp = data->dmc_divtable[index];
 
-	__raw_writel(tmp, S5P_CLKDIV_DMC0);
+	__raw_writel(tmp, EXYNOS4_CLKDIV_DMC0);
 
 	do {
-		tmp = __raw_readl(S5P_CLKDIV_STAT_DMC0);
+		tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_DMC0);
 	} while (tmp & 0x11111111);
 
 	/* Change Divider - TOP */
 	tmp = data->top_divtable[index];
 
-	__raw_writel(tmp, S5P_CLKDIV_TOP);
+	__raw_writel(tmp, EXYNOS4_CLKDIV_TOP);
 
 	do {
-		tmp = __raw_readl(S5P_CLKDIV_STAT_TOP);
+		tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_TOP);
 	} while (tmp & 0x11111);
 
 	/* Change Divider - LEFTBUS */
-	tmp = __raw_readl(S5P_CLKDIV_LEFTBUS);
+	tmp = __raw_readl(EXYNOS4_CLKDIV_LEFTBUS);
 
-	tmp &= ~(S5P_CLKDIV_BUS_GDLR_MASK | S5P_CLKDIV_BUS_GPLR_MASK);
+	tmp &= ~(EXYNOS4_CLKDIV_BUS_GDLR_MASK | EXYNOS4_CLKDIV_BUS_GPLR_MASK);
 
 	tmp |= ((exynos4210_clkdiv_lr_bus[index][0] <<
-				S5P_CLKDIV_BUS_GDLR_SHIFT) |
+				EXYNOS4_CLKDIV_BUS_GDLR_SHIFT) |
 		(exynos4210_clkdiv_lr_bus[index][1] <<
-				S5P_CLKDIV_BUS_GPLR_SHIFT));
+				EXYNOS4_CLKDIV_BUS_GPLR_SHIFT));
 
-	__raw_writel(tmp, S5P_CLKDIV_LEFTBUS);
+	__raw_writel(tmp, EXYNOS4_CLKDIV_LEFTBUS);
 
 	do {
-		tmp = __raw_readl(S5P_CLKDIV_STAT_LEFTBUS);
+		tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_LEFTBUS);
 	} while (tmp & 0x11);
 
 	/* Change Divider - RIGHTBUS */
-	tmp = __raw_readl(S5P_CLKDIV_RIGHTBUS);
+	tmp = __raw_readl(EXYNOS4_CLKDIV_RIGHTBUS);
 
-	tmp &= ~(S5P_CLKDIV_BUS_GDLR_MASK | S5P_CLKDIV_BUS_GPLR_MASK);
+	tmp &= ~(EXYNOS4_CLKDIV_BUS_GDLR_MASK | EXYNOS4_CLKDIV_BUS_GPLR_MASK);
 
 	tmp |= ((exynos4210_clkdiv_lr_bus[index][0] <<
-				S5P_CLKDIV_BUS_GDLR_SHIFT) |
+				EXYNOS4_CLKDIV_BUS_GDLR_SHIFT) |
 		(exynos4210_clkdiv_lr_bus[index][1] <<
-				S5P_CLKDIV_BUS_GPLR_SHIFT));
+				EXYNOS4_CLKDIV_BUS_GPLR_SHIFT));
 
-	__raw_writel(tmp, S5P_CLKDIV_RIGHTBUS);
+	__raw_writel(tmp, EXYNOS4_CLKDIV_RIGHTBUS);
 
 	do {
-		tmp = __raw_readl(S5P_CLKDIV_STAT_RIGHTBUS);
+		tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_RIGHTBUS);
 	} while (tmp & 0x11);
 
 	return 0;
@@ -376,137 +376,137 @@ static int exynos4x12_set_busclk(struct busfreq_data *data, struct opp *opp)
 	/* Change Divider - DMC0 */
 	tmp = data->dmc_divtable[index];
 
-	__raw_writel(tmp, S5P_CLKDIV_DMC0);
+	__raw_writel(tmp, EXYNOS4_CLKDIV_DMC0);
 
 	do {
-		tmp = __raw_readl(S5P_CLKDIV_STAT_DMC0);
+		tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_DMC0);
 	} while (tmp & 0x11111111);
 
 	/* Change Divider - DMC1 */
-	tmp = __raw_readl(S5P_CLKDIV_DMC1);
+	tmp = __raw_readl(EXYNOS4_CLKDIV_DMC1);
 
-	tmp &= ~(S5P_CLKDIV_DMC1_G2D_ACP_MASK |
-		S5P_CLKDIV_DMC1_C2C_MASK |
-		S5P_CLKDIV_DMC1_C2CACLK_MASK);
+	tmp &= ~(EXYNOS4_CLKDIV_DMC1_G2D_ACP_MASK |
+		EXYNOS4_CLKDIV_DMC1_C2C_MASK |
+		EXYNOS4_CLKDIV_DMC1_C2CACLK_MASK);
 
 	tmp |= ((exynos4x12_clkdiv_dmc1[index][0] <<
-				S5P_CLKDIV_DMC1_G2D_ACP_SHIFT) |
+				EXYNOS4_CLKDIV_DMC1_G2D_ACP_SHIFT) |
 		(exynos4x12_clkdiv_dmc1[index][1] <<
-				S5P_CLKDIV_DMC1_C2C_SHIFT) |
+				EXYNOS4_CLKDIV_DMC1_C2C_SHIFT) |
 		(exynos4x12_clkdiv_dmc1[index][2] <<
-				S5P_CLKDIV_DMC1_C2CACLK_SHIFT));
+				EXYNOS4_CLKDIV_DMC1_C2CACLK_SHIFT));
 
-	__raw_writel(tmp, S5P_CLKDIV_DMC1);
+	__raw_writel(tmp, EXYNOS4_CLKDIV_DMC1);
 
 	do {
-		tmp = __raw_readl(S5P_CLKDIV_STAT_DMC1);
+		tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_DMC1);
 	} while (tmp & 0x111111);
 
 	/* Change Divider - TOP */
-	tmp = __raw_readl(S5P_CLKDIV_TOP);
+	tmp = __raw_readl(EXYNOS4_CLKDIV_TOP);
 
-	tmp &= ~(S5P_CLKDIV_TOP_ACLK266_GPS_MASK |
-		S5P_CLKDIV_TOP_ACLK100_MASK |
-		S5P_CLKDIV_TOP_ACLK160_MASK |
-		S5P_CLKDIV_TOP_ACLK133_MASK |
-		S5P_CLKDIV_TOP_ONENAND_MASK);
+	tmp &= ~(EXYNOS4_CLKDIV_TOP_ACLK266_GPS_MASK |
+		EXYNOS4_CLKDIV_TOP_ACLK100_MASK |
+		EXYNOS4_CLKDIV_TOP_ACLK160_MASK |
+		EXYNOS4_CLKDIV_TOP_ACLK133_MASK |
+		EXYNOS4_CLKDIV_TOP_ONENAND_MASK);
 
 	tmp |= ((exynos4x12_clkdiv_top[index][0] <<
-				S5P_CLKDIV_TOP_ACLK266_GPS_SHIFT) |
+				EXYNOS4_CLKDIV_TOP_ACLK266_GPS_SHIFT) |
 		(exynos4x12_clkdiv_top[index][1] <<
-				S5P_CLKDIV_TOP_ACLK100_SHIFT) |
+				EXYNOS4_CLKDIV_TOP_ACLK100_SHIFT) |
 		(exynos4x12_clkdiv_top[index][2] <<
-				S5P_CLKDIV_TOP_ACLK160_SHIFT) |
+				EXYNOS4_CLKDIV_TOP_ACLK160_SHIFT) |
 		(exynos4x12_clkdiv_top[index][3] <<
-				S5P_CLKDIV_TOP_ACLK133_SHIFT) |
+				EXYNOS4_CLKDIV_TOP_ACLK133_SHIFT) |
 		(exynos4x12_clkdiv_top[index][4] <<
-				S5P_CLKDIV_TOP_ONENAND_SHIFT));
+				EXYNOS4_CLKDIV_TOP_ONENAND_SHIFT));
 
-	__raw_writel(tmp, S5P_CLKDIV_TOP);
+	__raw_writel(tmp, EXYNOS4_CLKDIV_TOP);
 
 	do {
-		tmp = __raw_readl(S5P_CLKDIV_STAT_TOP);
+		tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_TOP);
 	} while (tmp & 0x11111);
 
 	/* Change Divider - LEFTBUS */
-	tmp = __raw_readl(S5P_CLKDIV_LEFTBUS);
+	tmp = __raw_readl(EXYNOS4_CLKDIV_LEFTBUS);
 
-	tmp &= ~(S5P_CLKDIV_BUS_GDLR_MASK | S5P_CLKDIV_BUS_GPLR_MASK);
+	tmp &= ~(EXYNOS4_CLKDIV_BUS_GDLR_MASK | EXYNOS4_CLKDIV_BUS_GPLR_MASK);
 
 	tmp |= ((exynos4x12_clkdiv_lr_bus[index][0] <<
-				S5P_CLKDIV_BUS_GDLR_SHIFT) |
+				EXYNOS4_CLKDIV_BUS_GDLR_SHIFT) |
 		(exynos4x12_clkdiv_lr_bus[index][1] <<
-				S5P_CLKDIV_BUS_GPLR_SHIFT));
+				EXYNOS4_CLKDIV_BUS_GPLR_SHIFT));
 
-	__raw_writel(tmp, S5P_CLKDIV_LEFTBUS);
+	__raw_writel(tmp, EXYNOS4_CLKDIV_LEFTBUS);
 
 	do {
-		tmp = __raw_readl(S5P_CLKDIV_STAT_LEFTBUS);
+		tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_LEFTBUS);
 	} while (tmp & 0x11);
 
 	/* Change Divider - RIGHTBUS */
-	tmp = __raw_readl(S5P_CLKDIV_RIGHTBUS);
+	tmp = __raw_readl(EXYNOS4_CLKDIV_RIGHTBUS);
 
-	tmp &= ~(S5P_CLKDIV_BUS_GDLR_MASK | S5P_CLKDIV_BUS_GPLR_MASK);
+	tmp &= ~(EXYNOS4_CLKDIV_BUS_GDLR_MASK | EXYNOS4_CLKDIV_BUS_GPLR_MASK);
 
 	tmp |= ((exynos4x12_clkdiv_lr_bus[index][0] <<
-				S5P_CLKDIV_BUS_GDLR_SHIFT) |
+				EXYNOS4_CLKDIV_BUS_GDLR_SHIFT) |
 		(exynos4x12_clkdiv_lr_bus[index][1] <<
-				S5P_CLKDIV_BUS_GPLR_SHIFT));
+				EXYNOS4_CLKDIV_BUS_GPLR_SHIFT));
 
-	__raw_writel(tmp, S5P_CLKDIV_RIGHTBUS);
+	__raw_writel(tmp, EXYNOS4_CLKDIV_RIGHTBUS);
 
 	do {
-		tmp = __raw_readl(S5P_CLKDIV_STAT_RIGHTBUS);
+		tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_RIGHTBUS);
 	} while (tmp & 0x11);
 
 	/* Change Divider - MFC */
-	tmp = __raw_readl(S5P_CLKDIV_MFC);
+	tmp = __raw_readl(EXYNOS4_CLKDIV_MFC);
 
-	tmp &= ~(S5P_CLKDIV_MFC_MASK);
+	tmp &= ~(EXYNOS4_CLKDIV_MFC_MASK);
 
 	tmp |= ((exynos4x12_clkdiv_sclkip[index][0] <<
-				S5P_CLKDIV_MFC_SHIFT));
+				EXYNOS4_CLKDIV_MFC_SHIFT));
 
-	__raw_writel(tmp, S5P_CLKDIV_MFC);
+	__raw_writel(tmp, EXYNOS4_CLKDIV_MFC);
 
 	do {
-		tmp = __raw_readl(S5P_CLKDIV_STAT_MFC);
+		tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_MFC);
 	} while (tmp & 0x1);
 
 	/* Change Divider - JPEG */
-	tmp = __raw_readl(S5P_CLKDIV_CAM1);
+	tmp = __raw_readl(EXYNOS4_CLKDIV_CAM1);
 
-	tmp &= ~(S5P_CLKDIV_CAM1_JPEG_MASK);
+	tmp &= ~(EXYNOS4_CLKDIV_CAM1_JPEG_MASK);
 
 	tmp |= ((exynos4x12_clkdiv_sclkip[index][1] <<
-				S5P_CLKDIV_CAM1_JPEG_SHIFT));
+				EXYNOS4_CLKDIV_CAM1_JPEG_SHIFT));
 
-	__raw_writel(tmp, S5P_CLKDIV_CAM1);
+	__raw_writel(tmp, EXYNOS4_CLKDIV_CAM1);
 
 	do {
-		tmp = __raw_readl(S5P_CLKDIV_STAT_CAM1);
+		tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_CAM1);
 	} while (tmp & 0x1);
 
 	/* Change Divider - FIMC0~3 */
-	tmp = __raw_readl(S5P_CLKDIV_CAM);
+	tmp = __raw_readl(EXYNOS4_CLKDIV_CAM);
 
-	tmp &= ~(S5P_CLKDIV_CAM_FIMC0_MASK | S5P_CLKDIV_CAM_FIMC1_MASK |
-		S5P_CLKDIV_CAM_FIMC2_MASK | S5P_CLKDIV_CAM_FIMC3_MASK);
+	tmp &= ~(EXYNOS4_CLKDIV_CAM_FIMC0_MASK | EXYNOS4_CLKDIV_CAM_FIMC1_MASK |
+		EXYNOS4_CLKDIV_CAM_FIMC2_MASK | EXYNOS4_CLKDIV_CAM_FIMC3_MASK);
 
 	tmp |= ((exynos4x12_clkdiv_sclkip[index][2] <<
-				S5P_CLKDIV_CAM_FIMC0_SHIFT) |
+				EXYNOS4_CLKDIV_CAM_FIMC0_SHIFT) |
 		(exynos4x12_clkdiv_sclkip[index][2] <<
-				S5P_CLKDIV_CAM_FIMC1_SHIFT) |
+				EXYNOS4_CLKDIV_CAM_FIMC1_SHIFT) |
 		(exynos4x12_clkdiv_sclkip[index][2] <<
-				S5P_CLKDIV_CAM_FIMC2_SHIFT) |
+				EXYNOS4_CLKDIV_CAM_FIMC2_SHIFT) |
 		(exynos4x12_clkdiv_sclkip[index][2] <<
-				S5P_CLKDIV_CAM_FIMC3_SHIFT));
+				EXYNOS4_CLKDIV_CAM_FIMC3_SHIFT));
 
-	__raw_writel(tmp, S5P_CLKDIV_CAM);
+	__raw_writel(tmp, EXYNOS4_CLKDIV_CAM);
 
 	do {
-		tmp = __raw_readl(S5P_CLKDIV_STAT_CAM1);
+		tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_CAM1);
 	} while (tmp & 0x1111);
 
 	return 0;
@@ -760,55 +760,55 @@ static int exynos4210_init_tables(struct busfreq_data *data)
 	int mgrp;
 	int i, err = 0;
 
-	tmp = __raw_readl(S5P_CLKDIV_DMC0);
+	tmp = __raw_readl(EXYNOS4_CLKDIV_DMC0);
 	for (i = LV_0; i < EX4210_LV_NUM; i++) {
-		tmp &= ~(S5P_CLKDIV_DMC0_ACP_MASK |
-			S5P_CLKDIV_DMC0_ACPPCLK_MASK |
-			S5P_CLKDIV_DMC0_DPHY_MASK |
-			S5P_CLKDIV_DMC0_DMC_MASK |
-			S5P_CLKDIV_DMC0_DMCD_MASK |
-			S5P_CLKDIV_DMC0_DMCP_MASK |
-			S5P_CLKDIV_DMC0_COPY2_MASK |
-			S5P_CLKDIV_DMC0_CORETI_MASK);
+		tmp &= ~(EXYNOS4_CLKDIV_DMC0_ACP_MASK |
+			EXYNOS4_CLKDIV_DMC0_ACPPCLK_MASK |
+			EXYNOS4_CLKDIV_DMC0_DPHY_MASK |
+			EXYNOS4_CLKDIV_DMC0_DMC_MASK |
+			EXYNOS4_CLKDIV_DMC0_DMCD_MASK |
+			EXYNOS4_CLKDIV_DMC0_DMCP_MASK |
+			EXYNOS4_CLKDIV_DMC0_COPY2_MASK |
+			EXYNOS4_CLKDIV_DMC0_CORETI_MASK);
 
 		tmp |= ((exynos4210_clkdiv_dmc0[i][0] <<
-					S5P_CLKDIV_DMC0_ACP_SHIFT) |
+					EXYNOS4_CLKDIV_DMC0_ACP_SHIFT) |
 			(exynos4210_clkdiv_dmc0[i][1] <<
-					S5P_CLKDIV_DMC0_ACPPCLK_SHIFT) |
+					EXYNOS4_CLKDIV_DMC0_ACPPCLK_SHIFT) |
 			(exynos4210_clkdiv_dmc0[i][2] <<
-					S5P_CLKDIV_DMC0_DPHY_SHIFT) |
+					EXYNOS4_CLKDIV_DMC0_DPHY_SHIFT) |
 			(exynos4210_clkdiv_dmc0[i][3] <<
-					S5P_CLKDIV_DMC0_DMC_SHIFT) |
+					EXYNOS4_CLKDIV_DMC0_DMC_SHIFT) |
 			(exynos4210_clkdiv_dmc0[i][4] <<
-					S5P_CLKDIV_DMC0_DMCD_SHIFT) |
+					EXYNOS4_CLKDIV_DMC0_DMCD_SHIFT) |
 			(exynos4210_clkdiv_dmc0[i][5] <<
-					S5P_CLKDIV_DMC0_DMCP_SHIFT) |
+					EXYNOS4_CLKDIV_DMC0_DMCP_SHIFT) |
 			(exynos4210_clkdiv_dmc0[i][6] <<
-					S5P_CLKDIV_DMC0_COPY2_SHIFT) |
+					EXYNOS4_CLKDIV_DMC0_COPY2_SHIFT) |
 			(exynos4210_clkdiv_dmc0[i][7] <<
-					S5P_CLKDIV_DMC0_CORETI_SHIFT));
+					EXYNOS4_CLKDIV_DMC0_CORETI_SHIFT));
 
 		data->dmc_divtable[i] = tmp;
 	}
 
-	tmp = __raw_readl(S5P_CLKDIV_TOP);
+	tmp = __raw_readl(EXYNOS4_CLKDIV_TOP);
 	for (i = LV_0; i <  EX4210_LV_NUM; i++) {
-		tmp &= ~(S5P_CLKDIV_TOP_ACLK200_MASK |
-			S5P_CLKDIV_TOP_ACLK100_MASK |
-			S5P_CLKDIV_TOP_ACLK160_MASK |
-			S5P_CLKDIV_TOP_ACLK133_MASK |
-			S5P_CLKDIV_TOP_ONENAND_MASK);
+		tmp &= ~(EXYNOS4_CLKDIV_TOP_ACLK200_MASK |
+			EXYNOS4_CLKDIV_TOP_ACLK100_MASK |
+			EXYNOS4_CLKDIV_TOP_ACLK160_MASK |
+			EXYNOS4_CLKDIV_TOP_ACLK133_MASK |
+			EXYNOS4_CLKDIV_TOP_ONENAND_MASK);
 
 		tmp |= ((exynos4210_clkdiv_top[i][0] <<
-					S5P_CLKDIV_TOP_ACLK200_SHIFT) |
+					EXYNOS4_CLKDIV_TOP_ACLK200_SHIFT) |
 			(exynos4210_clkdiv_top[i][1] <<
-					S5P_CLKDIV_TOP_ACLK100_SHIFT) |
+					EXYNOS4_CLKDIV_TOP_ACLK100_SHIFT) |
 			(exynos4210_clkdiv_top[i][2] <<
-					S5P_CLKDIV_TOP_ACLK160_SHIFT) |
+					EXYNOS4_CLKDIV_TOP_ACLK160_SHIFT) |
 			(exynos4210_clkdiv_top[i][3] <<
-					S5P_CLKDIV_TOP_ACLK133_SHIFT) |
+					EXYNOS4_CLKDIV_TOP_ACLK133_SHIFT) |
 			(exynos4210_clkdiv_top[i][4] <<
-					S5P_CLKDIV_TOP_ONENAND_SHIFT));
+					EXYNOS4_CLKDIV_TOP_ONENAND_SHIFT));
 
 		data->top_divtable[i] = tmp;
 	}
@@ -868,32 +868,32 @@ static int exynos4x12_init_tables(struct busfreq_data *data)
 	int ret;
 
 	/* Enable pause function for DREX2 DVFS */
-	tmp = __raw_readl(S5P_DMC_PAUSE_CTRL);
-	tmp |= DMC_PAUSE_ENABLE;
-	__raw_writel(tmp, S5P_DMC_PAUSE_CTRL);
+	tmp = __raw_readl(EXYNOS4_DMC_PAUSE_CTRL);
+	tmp |= EXYNOS4_DMC_PAUSE_ENABLE;
+	__raw_writel(tmp, EXYNOS4_DMC_PAUSE_CTRL);
 
-	tmp = __raw_readl(S5P_CLKDIV_DMC0);
+	tmp = __raw_readl(EXYNOS4_CLKDIV_DMC0);
 
 	for (i = 0; i <  EX4x12_LV_NUM; i++) {
-		tmp &= ~(S5P_CLKDIV_DMC0_ACP_MASK |
-			S5P_CLKDIV_DMC0_ACPPCLK_MASK |
-			S5P_CLKDIV_DMC0_DPHY_MASK |
-			S5P_CLKDIV_DMC0_DMC_MASK |
-			S5P_CLKDIV_DMC0_DMCD_MASK |
-			S5P_CLKDIV_DMC0_DMCP_MASK);
+		tmp &= ~(EXYNOS4_CLKDIV_DMC0_ACP_MASK |
+			EXYNOS4_CLKDIV_DMC0_ACPPCLK_MASK |
+			EXYNOS4_CLKDIV_DMC0_DPHY_MASK |
+			EXYNOS4_CLKDIV_DMC0_DMC_MASK |
+			EXYNOS4_CLKDIV_DMC0_DMCD_MASK |
+			EXYNOS4_CLKDIV_DMC0_DMCP_MASK);
 
 		tmp |= ((exynos4x12_clkdiv_dmc0[i][0] <<
-					S5P_CLKDIV_DMC0_ACP_SHIFT) |
+					EXYNOS4_CLKDIV_DMC0_ACP_SHIFT) |
 			(exynos4x12_clkdiv_dmc0[i][1] <<
-					S5P_CLKDIV_DMC0_ACPPCLK_SHIFT) |
+					EXYNOS4_CLKDIV_DMC0_ACPPCLK_SHIFT) |
 			(exynos4x12_clkdiv_dmc0[i][2] <<
-					S5P_CLKDIV_DMC0_DPHY_SHIFT) |
+					EXYNOS4_CLKDIV_DMC0_DPHY_SHIFT) |
 			(exynos4x12_clkdiv_dmc0[i][3] <<
-					S5P_CLKDIV_DMC0_DMC_SHIFT) |
+					EXYNOS4_CLKDIV_DMC0_DMC_SHIFT) |
 			(exynos4x12_clkdiv_dmc0[i][4] <<
-					S5P_CLKDIV_DMC0_DMCD_SHIFT) |
+					EXYNOS4_CLKDIV_DMC0_DMCD_SHIFT) |
 			(exynos4x12_clkdiv_dmc0[i][5] <<
-					S5P_CLKDIV_DMC0_DMCP_SHIFT));
+					EXYNOS4_CLKDIV_DMC0_DMCP_SHIFT));
 
 		data->dmc_divtable[i] = tmp;
 	}
diff --git a/drivers/gpio/gpio-ep93xx.c b/drivers/gpio/gpio-ep93xx.c
index 1c0fc3756cb1..4ca5642e9776 100644
--- a/drivers/gpio/gpio-ep93xx.c
+++ b/drivers/gpio/gpio-ep93xx.c
@@ -378,13 +378,6 @@ static int __devinit ep93xx_gpio_probe(struct platform_device *pdev)
 	}
 	ep93xx_gpio->mmio_base = mmio;
 
-	/* Default all ports to GPIO */
-	ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS |
-			       EP93XX_SYSCON_DEVCFG_GONK |
-			       EP93XX_SYSCON_DEVCFG_EONIDE |
-			       EP93XX_SYSCON_DEVCFG_GONIDE |
-			       EP93XX_SYSCON_DEVCFG_HONIDE);
-
 	for (i = 0; i < ARRAY_SIZE(ep93xx_gpio_banks); i++) {
 		struct bgpio_chip *bgc = &ep93xx_gpio->bgc[i];
 		struct ep93xx_gpio_bank *bank = &ep93xx_gpio_banks[i];
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 0b0562979171..f49bd6f47a50 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -21,6 +21,7 @@
 #include <linux/io.h>
 #include <linux/slab.h>
 #include <linux/pm_runtime.h>
+#include <linux/pm.h>
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
@@ -28,19 +29,36 @@
 #include <asm/gpio.h>
 #include <asm/mach/irq.h>
 
+#define OFF_MODE	1
+
+static LIST_HEAD(omap_gpio_list);
+
+struct gpio_regs {
+	u32 irqenable1;
+	u32 irqenable2;
+	u32 wake_en;
+	u32 ctrl;
+	u32 oe;
+	u32 leveldetect0;
+	u32 leveldetect1;
+	u32 risingdetect;
+	u32 fallingdetect;
+	u32 dataout;
+	u32 debounce;
+	u32 debounce_en;
+};
+
 struct gpio_bank {
+	struct list_head node;
 	unsigned long pbase;
 	void __iomem *base;
 	u16 irq;
 	u16 virtual_irq_start;
-	int method;
 	u32 suspend_wakeup;
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS)
 	u32 saved_wakeup;
-#endif
 	u32 non_wakeup_gpios;
 	u32 enabled_non_wakeup_gpios;
-
+	struct gpio_regs context;
 	u32 saved_datain;
 	u32 saved_fallingdetect;
 	u32 saved_risingdetect;
@@ -51,44 +69,27 @@ struct gpio_bank {
 	struct clk *dbck;
 	u32 mod_usage;
 	u32 dbck_enable_mask;
+	bool dbck_enabled;
 	struct device *dev;
+	bool is_mpuio;
 	bool dbck_flag;
+	bool loses_context;
 	int stride;
 	u32 width;
+	int context_loss_count;
+	u16 id;
+	int power_mode;
+	bool workaround_enabled;
 
 	void (*set_dataout)(struct gpio_bank *bank, int gpio, int enable);
+	int (*get_context_loss_count)(struct device *dev);
 
 	struct omap_gpio_reg_offs *regs;
 };
 
-#ifdef CONFIG_ARCH_OMAP3
-struct omap3_gpio_regs {
-	u32 irqenable1;
-	u32 irqenable2;
-	u32 wake_en;
-	u32 ctrl;
-	u32 oe;
-	u32 leveldetect0;
-	u32 leveldetect1;
-	u32 risingdetect;
-	u32 fallingdetect;
-	u32 dataout;
-};
-
-static struct omap3_gpio_regs gpio_context[OMAP34XX_NR_GPIOS];
-#endif
-
-/*
- * TODO: Cleanup gpio_bank usage as it is having information
- * related to all instances of the device
- */
-static struct gpio_bank *gpio_bank;
-
-/* TODO: Analyze removing gpio_bank_count usage from driver code */
-int gpio_bank_count;
-
 #define GPIO_INDEX(bank, gpio) (gpio % bank->width)
 #define GPIO_BIT(bank, gpio) (1 << GPIO_INDEX(bank, gpio))
+#define GPIO_MOD_CTRL_BIT	BIT(0)
 
 static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
 {
@@ -102,6 +103,7 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
 	else
 		l &= ~(1 << gpio);
 	__raw_writel(l, reg);
+	bank->context.oe = l;
 }
 
 
@@ -132,6 +134,7 @@ static void _set_gpio_dataout_mask(struct gpio_bank *bank, int gpio, int enable)
 	else
 		l &= ~gpio_bit;
 	__raw_writel(l, reg);
+	bank->context.dataout = l;
 }
 
 static int _get_gpio_datain(struct gpio_bank *bank, int gpio)
@@ -160,6 +163,22 @@ static inline void _gpio_rmw(void __iomem *base, u32 reg, u32 mask, bool set)
 	__raw_writel(l, base + reg);
 }
 
+static inline void _gpio_dbck_enable(struct gpio_bank *bank)
+{
+	if (bank->dbck_enable_mask && !bank->dbck_enabled) {
+		clk_enable(bank->dbck);
+		bank->dbck_enabled = true;
+	}
+}
+
+static inline void _gpio_dbck_disable(struct gpio_bank *bank)
+{
+	if (bank->dbck_enable_mask && bank->dbck_enabled) {
+		clk_disable(bank->dbck);
+		bank->dbck_enabled = false;
+	}
+}
+
 /**
  * _set_gpio_debounce - low level gpio debounce time
  * @bank: the gpio bank we're acting upon
@@ -188,70 +207,74 @@ static void _set_gpio_debounce(struct gpio_bank *bank, unsigned gpio,
 
 	l = GPIO_BIT(bank, gpio);
 
+	clk_enable(bank->dbck);
 	reg = bank->base + bank->regs->debounce;
 	__raw_writel(debounce, reg);
 
 	reg = bank->base + bank->regs->debounce_en;
 	val = __raw_readl(reg);
 
-	if (debounce) {
+	if (debounce)
 		val |= l;
-		clk_enable(bank->dbck);
-	} else {
+	else
 		val &= ~l;
-		clk_disable(bank->dbck);
-	}
 	bank->dbck_enable_mask = val;
 
 	__raw_writel(val, reg);
+	clk_disable(bank->dbck);
+	/*
+	 * Enable debounce clock per module.
+	 * This call is mandatory because in omap_gpio_request() when
+	 * *_runtime_get_sync() is called,  _gpio_dbck_enable() within
+	 * runtime callbck fails to turn on dbck because dbck_enable_mask
+	 * used within _gpio_dbck_enable() is still not initialized at
+	 * that point. Therefore we have to enable dbck here.
+	 */
+	_gpio_dbck_enable(bank);
+	if (bank->dbck_enable_mask) {
+		bank->context.debounce = debounce;
+		bank->context.debounce_en = val;
+	}
 }
 
-#ifdef CONFIG_ARCH_OMAP2PLUS
-static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
+static inline void set_gpio_trigger(struct gpio_bank *bank, int gpio,
 						int trigger)
 {
 	void __iomem *base = bank->base;
 	u32 gpio_bit = 1 << gpio;
 
-	if (cpu_is_omap44xx()) {
-		_gpio_rmw(base, OMAP4_GPIO_LEVELDETECT0, gpio_bit,
-			  trigger & IRQ_TYPE_LEVEL_LOW);
-		_gpio_rmw(base, OMAP4_GPIO_LEVELDETECT1, gpio_bit,
-			  trigger & IRQ_TYPE_LEVEL_HIGH);
-		_gpio_rmw(base, OMAP4_GPIO_RISINGDETECT, gpio_bit,
-			  trigger & IRQ_TYPE_EDGE_RISING);
-		_gpio_rmw(base, OMAP4_GPIO_FALLINGDETECT, gpio_bit,
-			  trigger & IRQ_TYPE_EDGE_FALLING);
-	} else {
-		_gpio_rmw(base, OMAP24XX_GPIO_LEVELDETECT0, gpio_bit,
-			  trigger & IRQ_TYPE_LEVEL_LOW);
-		_gpio_rmw(base, OMAP24XX_GPIO_LEVELDETECT1, gpio_bit,
-			  trigger & IRQ_TYPE_LEVEL_HIGH);
-		_gpio_rmw(base, OMAP24XX_GPIO_RISINGDETECT, gpio_bit,
-			  trigger & IRQ_TYPE_EDGE_RISING);
-		_gpio_rmw(base, OMAP24XX_GPIO_FALLINGDETECT, gpio_bit,
-			  trigger & IRQ_TYPE_EDGE_FALLING);
-	}
+	_gpio_rmw(base, bank->regs->leveldetect0, gpio_bit,
+		  trigger & IRQ_TYPE_LEVEL_LOW);
+	_gpio_rmw(base, bank->regs->leveldetect1, gpio_bit,
+		  trigger & IRQ_TYPE_LEVEL_HIGH);
+	_gpio_rmw(base, bank->regs->risingdetect, gpio_bit,
+		  trigger & IRQ_TYPE_EDGE_RISING);
+	_gpio_rmw(base, bank->regs->fallingdetect, gpio_bit,
+		  trigger & IRQ_TYPE_EDGE_FALLING);
+
+	bank->context.leveldetect0 =
+			__raw_readl(bank->base + bank->regs->leveldetect0);
+	bank->context.leveldetect1 =
+			__raw_readl(bank->base + bank->regs->leveldetect1);
+	bank->context.risingdetect =
+			__raw_readl(bank->base + bank->regs->risingdetect);
+	bank->context.fallingdetect =
+			__raw_readl(bank->base + bank->regs->fallingdetect);
+
 	if (likely(!(bank->non_wakeup_gpios & gpio_bit))) {
-		if (cpu_is_omap44xx()) {
-			_gpio_rmw(base, OMAP4_GPIO_IRQWAKEN0, gpio_bit,
-				  trigger != 0);
-		} else {
-			/*
-			 * GPIO wakeup request can only be generated on edge
-			 * transitions
-			 */
-			if (trigger & IRQ_TYPE_EDGE_BOTH)
-				__raw_writel(1 << gpio, bank->base
-					+ OMAP24XX_GPIO_SETWKUENA);
-			else
-				__raw_writel(1 << gpio, bank->base
-					+ OMAP24XX_GPIO_CLEARWKUENA);
-		}
+		_gpio_rmw(base, bank->regs->wkup_en, gpio_bit, trigger != 0);
+		bank->context.wake_en =
+			__raw_readl(bank->base + bank->regs->wkup_en);
 	}
+
 	/* This part needs to be executed always for OMAP{34xx, 44xx} */
-	if (cpu_is_omap34xx() || cpu_is_omap44xx() ||
-			(bank->non_wakeup_gpios & gpio_bit)) {
+	if (!bank->regs->irqctrl) {
+		/* On omap24xx proceed only when valid GPIO bit is set */
+		if (bank->non_wakeup_gpios) {
+			if (!(bank->non_wakeup_gpios & gpio_bit))
+				goto exit;
+		}
+
 		/*
 		 * Log the edge gpio and manually trigger the IRQ
 		 * after resume if the input level changes
@@ -264,17 +287,11 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
 			bank->enabled_non_wakeup_gpios &= ~gpio_bit;
 	}
 
-	if (cpu_is_omap44xx()) {
-		bank->level_mask =
-			__raw_readl(bank->base + OMAP4_GPIO_LEVELDETECT0) |
-			__raw_readl(bank->base + OMAP4_GPIO_LEVELDETECT1);
-	} else {
-		bank->level_mask =
-			__raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0) |
-			__raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
-	}
+exit:
+	bank->level_mask =
+		__raw_readl(bank->base + bank->regs->leveldetect0) |
+		__raw_readl(bank->base + bank->regs->leveldetect1);
 }
-#endif
 
 #ifdef CONFIG_ARCH_OMAP1
 /*
@@ -286,23 +303,10 @@ static void _toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio)
 	void __iomem *reg = bank->base;
 	u32 l = 0;
 
-	switch (bank->method) {
-	case METHOD_MPUIO:
-		reg += OMAP_MPUIO_GPIO_INT_EDGE / bank->stride;
-		break;
-#ifdef CONFIG_ARCH_OMAP15XX
-	case METHOD_GPIO_1510:
-		reg += OMAP1510_GPIO_INT_CONTROL;
-		break;
-#endif
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-	case METHOD_GPIO_7XX:
-		reg += OMAP7XX_GPIO_INT_CONTROL;
-		break;
-#endif
-	default:
+	if (!bank->regs->irqctrl)
 		return;
-	}
+
+	reg += bank->regs->irqctrl;
 
 	l = __raw_readl(reg);
 	if ((l >> gpio) & 1)
@@ -312,31 +316,21 @@ static void _toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio)
 
 	__raw_writel(l, reg);
 }
+#else
+static void _toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio) {}
 #endif
 
 static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
 {
 	void __iomem *reg = bank->base;
+	void __iomem *base = bank->base;
 	u32 l = 0;
 
-	switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP1
-	case METHOD_MPUIO:
-		reg += OMAP_MPUIO_GPIO_INT_EDGE / bank->stride;
-		l = __raw_readl(reg);
-		if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
-			bank->toggle_mask |= 1 << gpio;
-		if (trigger & IRQ_TYPE_EDGE_RISING)
-			l |= 1 << gpio;
-		else if (trigger & IRQ_TYPE_EDGE_FALLING)
-			l &= ~(1 << gpio);
-		else
-			goto bad;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
-	case METHOD_GPIO_1510:
-		reg += OMAP1510_GPIO_INT_CONTROL;
+	if (bank->regs->leveldetect0 && bank->regs->wkup_en) {
+		set_gpio_trigger(bank, gpio, trigger);
+	} else if (bank->regs->irqctrl) {
+		reg += bank->regs->irqctrl;
+
 		l = __raw_readl(reg);
 		if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
 			bank->toggle_mask |= 1 << gpio;
@@ -345,15 +339,15 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
 		else if (trigger & IRQ_TYPE_EDGE_FALLING)
 			l &= ~(1 << gpio);
 		else
-			goto bad;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
-	case METHOD_GPIO_1610:
+			return -EINVAL;
+
+		__raw_writel(l, reg);
+	} else if (bank->regs->edgectrl1) {
 		if (gpio & 0x08)
-			reg += OMAP1610_GPIO_EDGE_CTRL2;
+			reg += bank->regs->edgectrl2;
 		else
-			reg += OMAP1610_GPIO_EDGE_CTRL1;
+			reg += bank->regs->edgectrl1;
+
 		gpio &= 0x07;
 		l = __raw_readl(reg);
 		l &= ~(3 << (gpio << 1));
@@ -361,40 +355,14 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
 			l |= 2 << (gpio << 1);
 		if (trigger & IRQ_TYPE_EDGE_FALLING)
 			l |= 1 << (gpio << 1);
-		if (trigger)
-			/* Enable wake-up during idle for dynamic tick */
-			__raw_writel(1 << gpio, bank->base + OMAP1610_GPIO_SET_WAKEUPENA);
-		else
-			__raw_writel(1 << gpio, bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA);
-		break;
-#endif
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-	case METHOD_GPIO_7XX:
-		reg += OMAP7XX_GPIO_INT_CONTROL;
-		l = __raw_readl(reg);
-		if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
-			bank->toggle_mask |= 1 << gpio;
-		if (trigger & IRQ_TYPE_EDGE_RISING)
-			l |= 1 << gpio;
-		else if (trigger & IRQ_TYPE_EDGE_FALLING)
-			l &= ~(1 << gpio);
-		else
-			goto bad;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP2PLUS
-	case METHOD_GPIO_24XX:
-	case METHOD_GPIO_44XX:
-		set_24xx_gpio_triggering(bank, gpio, trigger);
-		return 0;
-#endif
-	default:
-		goto bad;
+
+		/* Enable wake-up during idle for dynamic tick */
+		_gpio_rmw(base, bank->regs->wkup_en, 1 << gpio, trigger);
+		bank->context.wake_en =
+			__raw_readl(bank->base + bank->regs->wkup_en);
+		__raw_writel(l, reg);
 	}
-	__raw_writel(l, reg);
 	return 0;
-bad:
-	return -EINVAL;
 }
 
 static int gpio_irq_type(struct irq_data *d, unsigned type)
@@ -412,12 +380,12 @@ static int gpio_irq_type(struct irq_data *d, unsigned type)
 	if (type & ~IRQ_TYPE_SENSE_MASK)
 		return -EINVAL;
 
-	/* OMAP1 allows only only edge triggering */
-	if (!cpu_class_is_omap2()
-			&& (type & (IRQ_TYPE_LEVEL_LOW|IRQ_TYPE_LEVEL_HIGH)))
+	bank = irq_data_get_irq_chip_data(d);
+
+	if (!bank->regs->leveldetect0 &&
+		(type & (IRQ_TYPE_LEVEL_LOW|IRQ_TYPE_LEVEL_HIGH)))
 		return -EINVAL;
 
-	bank = irq_data_get_irq_chip_data(d);
 	spin_lock_irqsave(&bank->lock, flags);
 	retval = _set_gpio_triggering(bank, GPIO_INDEX(bank, gpio), type);
 	spin_unlock_irqrestore(&bank->lock, flags);
@@ -484,6 +452,7 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
 	}
 
 	__raw_writel(l, reg);
+	bank->context.irqenable1 = l;
 }
 
 static void _disable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
@@ -504,6 +473,7 @@ static void _disable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
 	}
 
 	__raw_writel(l, reg);
+	bank->context.irqenable1 = l;
 }
 
 static inline void _set_gpio_irqenable(struct gpio_bank *bank, int gpio, int enable)
@@ -567,38 +537,39 @@ static int omap_gpio_request(struct gpio_chip *chip, unsigned offset)
 	struct gpio_bank *bank = container_of(chip, struct gpio_bank, chip);
 	unsigned long flags;
 
-	spin_lock_irqsave(&bank->lock, flags);
+	/*
+	 * If this is the first gpio_request for the bank,
+	 * enable the bank module.
+	 */
+	if (!bank->mod_usage)
+		pm_runtime_get_sync(bank->dev);
 
+	spin_lock_irqsave(&bank->lock, flags);
 	/* Set trigger to none. You need to enable the desired trigger with
 	 * request_irq() or set_irq_type().
 	 */
 	_set_gpio_triggering(bank, offset, IRQ_TYPE_NONE);
 
-#ifdef CONFIG_ARCH_OMAP15XX
-	if (bank->method == METHOD_GPIO_1510) {
-		void __iomem *reg;
+	if (bank->regs->pinctrl) {
+		void __iomem *reg = bank->base + bank->regs->pinctrl;
 
 		/* Claim the pin for MPU */
-		reg = bank->base + OMAP1510_GPIO_PIN_CONTROL;
 		__raw_writel(__raw_readl(reg) | (1 << offset), reg);
 	}
-#endif
-	if (!cpu_class_is_omap1()) {
-		if (!bank->mod_usage) {
-			void __iomem *reg = bank->base;
-			u32 ctrl;
-
-			if (cpu_is_omap24xx() || cpu_is_omap34xx())
-				reg += OMAP24XX_GPIO_CTRL;
-			else if (cpu_is_omap44xx())
-				reg += OMAP4_GPIO_CTRL;
-			ctrl = __raw_readl(reg);
-			/* Module is enabled, clocks are not gated */
-			ctrl &= 0xFFFFFFFE;
-			__raw_writel(ctrl, reg);
-		}
-		bank->mod_usage |= 1 << offset;
+
+	if (bank->regs->ctrl && !bank->mod_usage) {
+		void __iomem *reg = bank->base + bank->regs->ctrl;
+		u32 ctrl;
+
+		ctrl = __raw_readl(reg);
+		/* Module is enabled, clocks are not gated */
+		ctrl &= ~GPIO_MOD_CTRL_BIT;
+		__raw_writel(ctrl, reg);
+		bank->context.ctrl = ctrl;
 	}
+
+	bank->mod_usage |= 1 << offset;
+
 	spin_unlock_irqrestore(&bank->lock, flags);
 
 	return 0;
@@ -607,48 +578,40 @@ static int omap_gpio_request(struct gpio_chip *chip, unsigned offset)
 static void omap_gpio_free(struct gpio_chip *chip, unsigned offset)
 {
 	struct gpio_bank *bank = container_of(chip, struct gpio_bank, chip);
+	void __iomem *base = bank->base;
 	unsigned long flags;
 
 	spin_lock_irqsave(&bank->lock, flags);
-#ifdef CONFIG_ARCH_OMAP16XX
-	if (bank->method == METHOD_GPIO_1610) {
-		/* Disable wake-up during idle for dynamic tick */
-		void __iomem *reg = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA;
-		__raw_writel(1 << offset, reg);
-	}
-#endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-	if (bank->method == METHOD_GPIO_24XX) {
-		/* Disable wake-up during idle for dynamic tick */
-		void __iomem *reg = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
-		__raw_writel(1 << offset, reg);
-	}
-#endif
-#ifdef CONFIG_ARCH_OMAP4
-	if (bank->method == METHOD_GPIO_44XX) {
+
+	if (bank->regs->wkup_en) {
 		/* Disable wake-up during idle for dynamic tick */
-		void __iomem *reg = bank->base + OMAP4_GPIO_IRQWAKEN0;
-		__raw_writel(1 << offset, reg);
+		_gpio_rmw(base, bank->regs->wkup_en, 1 << offset, 0);
+		bank->context.wake_en =
+			__raw_readl(bank->base + bank->regs->wkup_en);
 	}
-#endif
-	if (!cpu_class_is_omap1()) {
-		bank->mod_usage &= ~(1 << offset);
-		if (!bank->mod_usage) {
-			void __iomem *reg = bank->base;
-			u32 ctrl;
-
-			if (cpu_is_omap24xx() || cpu_is_omap34xx())
-				reg += OMAP24XX_GPIO_CTRL;
-			else if (cpu_is_omap44xx())
-				reg += OMAP4_GPIO_CTRL;
-			ctrl = __raw_readl(reg);
-			/* Module is disabled, clocks are gated */
-			ctrl |= 1;
-			__raw_writel(ctrl, reg);
-		}
+
+	bank->mod_usage &= ~(1 << offset);
+
+	if (bank->regs->ctrl && !bank->mod_usage) {
+		void __iomem *reg = bank->base + bank->regs->ctrl;
+		u32 ctrl;
+
+		ctrl = __raw_readl(reg);
+		/* Module is disabled, clocks are gated */
+		ctrl |= GPIO_MOD_CTRL_BIT;
+		__raw_writel(ctrl, reg);
+		bank->context.ctrl = ctrl;
 	}
+
 	_reset_gpio(bank, bank->chip.base + offset);
 	spin_unlock_irqrestore(&bank->lock, flags);
+
+	/*
+	 * If this is the last gpio to be freed in the bank,
+	 * disable the bank module.
+	 */
+	if (!bank->mod_usage)
+		pm_runtime_put(bank->dev);
 }
 
 /*
@@ -674,6 +637,7 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 
 	bank = irq_get_handler_data(irq);
 	isr_reg = bank->base + bank->regs->irqstatus;
+	pm_runtime_get_sync(bank->dev);
 
 	if (WARN_ON(!isr_reg))
 		goto exit;
@@ -685,12 +649,8 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 		enabled = _get_gpio_irqbank_mask(bank);
 		isr_saved = isr = __raw_readl(isr_reg) & enabled;
 
-		if (cpu_is_omap15xx() && (bank->method == METHOD_MPUIO))
-			isr &= 0x0000ffff;
-
-		if (cpu_class_is_omap2()) {
+		if (bank->level_mask)
 			level_mask = bank->level_mask & enabled;
-		}
 
 		/* clear edge sensitive interrupts before handler(s) are
 		called so that we don't miss any interrupt occurred while
@@ -718,7 +678,6 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 			if (!(isr & 1))
 				continue;
 
-#ifdef CONFIG_ARCH_OMAP1
 			/*
 			 * Some chips can't respond to both rising and falling
 			 * at the same time.  If this irq was requested with
@@ -728,7 +687,6 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 			 */
 			if (bank->toggle_mask & (1 << gpio_index))
 				_toggle_gpio_edge_triggering(bank, gpio_index);
-#endif
 
 			generic_handle_irq(gpio_irq);
 		}
@@ -740,6 +698,7 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 exit:
 	if (!unmasked)
 		chained_irq_exit(chip, desc);
+	pm_runtime_put(bank->dev);
 }
 
 static void gpio_irq_shutdown(struct irq_data *d)
@@ -808,14 +767,6 @@ static struct irq_chip gpio_irq_chip = {
 
 /*---------------------------------------------------------------------*/
 
-#ifdef CONFIG_ARCH_OMAP1
-
-#define bank_is_mpuio(bank)	((bank)->method == METHOD_MPUIO)
-
-#ifdef CONFIG_ARCH_OMAP16XX
-
-#include <linux/platform_device.h>
-
 static int omap_mpuio_suspend_noirq(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
@@ -869,32 +820,16 @@ static struct platform_device omap_mpuio_device = {
 	/* could list the /proc/iomem resources */
 };
 
-static inline void mpuio_init(void)
+static inline void mpuio_init(struct gpio_bank *bank)
 {
-	struct gpio_bank *bank = &gpio_bank[0];
 	platform_set_drvdata(&omap_mpuio_device, bank);
 
 	if (platform_driver_register(&omap_mpuio_driver) == 0)
 		(void) platform_device_register(&omap_mpuio_device);
 }
 
-#else
-static inline void mpuio_init(void) {}
-#endif	/* 16xx */
-
-#else
-
-#define bank_is_mpuio(bank)	0
-static inline void mpuio_init(void) {}
-
-#endif
-
 /*---------------------------------------------------------------------*/
 
-/* REVISIT these are stupid implementations!  replace by ones that
- * don't switch on METHOD_* and which mostly avoid spinlocks
- */
-
 static int gpio_input(struct gpio_chip *chip, unsigned offset)
 {
 	struct gpio_bank *bank;
@@ -1007,78 +942,32 @@ static void __init omap_gpio_show_rev(struct gpio_bank *bank)
  */
 static struct lock_class_key gpio_lock_class;
 
-static inline int init_gpio_info(struct platform_device *pdev)
+static void omap_gpio_mod_init(struct gpio_bank *bank)
 {
-	/* TODO: Analyze removing gpio_bank_count usage from driver code */
-	gpio_bank = kzalloc(gpio_bank_count * sizeof(struct gpio_bank),
-				GFP_KERNEL);
-	if (!gpio_bank) {
-		dev_err(&pdev->dev, "Memory alloc failed for gpio_bank\n");
-		return -ENOMEM;
-	}
-	return 0;
-}
+	void __iomem *base = bank->base;
+	u32 l = 0xffffffff;
 
-/* TODO: Cleanup cpu_is_* checks */
-static void omap_gpio_mod_init(struct gpio_bank *bank, int id)
-{
-	if (cpu_class_is_omap2()) {
-		if (cpu_is_omap44xx()) {
-			__raw_writel(0xffffffff, bank->base +
-					OMAP4_GPIO_IRQSTATUSCLR0);
-			__raw_writel(0x00000000, bank->base +
-					 OMAP4_GPIO_DEBOUNCENABLE);
-			/* Initialize interface clk ungated, module enabled */
-			__raw_writel(0, bank->base + OMAP4_GPIO_CTRL);
-		} else if (cpu_is_omap34xx()) {
-			__raw_writel(0x00000000, bank->base +
-					OMAP24XX_GPIO_IRQENABLE1);
-			__raw_writel(0xffffffff, bank->base +
-					OMAP24XX_GPIO_IRQSTATUS1);
-			__raw_writel(0x00000000, bank->base +
-					OMAP24XX_GPIO_DEBOUNCE_EN);
-
-			/* Initialize interface clk ungated, module enabled */
-			__raw_writel(0, bank->base + OMAP24XX_GPIO_CTRL);
-		} else if (cpu_is_omap24xx()) {
-			static const u32 non_wakeup_gpios[] = {
-				0xe203ffc0, 0x08700040
-			};
-			if (id < ARRAY_SIZE(non_wakeup_gpios))
-				bank->non_wakeup_gpios = non_wakeup_gpios[id];
-		}
-	} else if (cpu_class_is_omap1()) {
-		if (bank_is_mpuio(bank))
-			__raw_writew(0xffff, bank->base +
-				OMAP_MPUIO_GPIO_MASKIT / bank->stride);
-		if (cpu_is_omap15xx() && bank->method == METHOD_GPIO_1510) {
-			__raw_writew(0xffff, bank->base
-						+ OMAP1510_GPIO_INT_MASK);
-			__raw_writew(0x0000, bank->base
-						+ OMAP1510_GPIO_INT_STATUS);
-		}
-		if (cpu_is_omap16xx() && bank->method == METHOD_GPIO_1610) {
-			__raw_writew(0x0000, bank->base
-						+ OMAP1610_GPIO_IRQENABLE1);
-			__raw_writew(0xffff, bank->base
-						+ OMAP1610_GPIO_IRQSTATUS1);
-			__raw_writew(0x0014, bank->base
-						+ OMAP1610_GPIO_SYSCONFIG);
+	if (bank->width == 16)
+		l = 0xffff;
 
-			/*
-			 * Enable system clock for GPIO module.
-			 * The CAM_CLK_CTRL *is* really the right place.
-			 */
-			omap_writel(omap_readl(ULPD_CAM_CLK_CTRL) | 0x04,
-						ULPD_CAM_CLK_CTRL);
-		}
-		if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_7XX) {
-			__raw_writel(0xffffffff, bank->base
-						+ OMAP7XX_GPIO_INT_MASK);
-			__raw_writel(0x00000000, bank->base
-						+ OMAP7XX_GPIO_INT_STATUS);
-		}
+	if (bank->is_mpuio) {
+		__raw_writel(l, bank->base + bank->regs->irqenable);
+		return;
 	}
+
+	_gpio_rmw(base, bank->regs->irqenable, l, bank->regs->irqenable_inv);
+	_gpio_rmw(base, bank->regs->irqstatus, l,
+					bank->regs->irqenable_inv == false);
+	_gpio_rmw(base, bank->regs->irqenable, l, bank->regs->debounce_en != 0);
+	_gpio_rmw(base, bank->regs->irqenable, l, bank->regs->ctrl != 0);
+	if (bank->regs->debounce_en)
+		_gpio_rmw(base, bank->regs->debounce_en, 0, 1);
+
+	/* Save OE default value (0xffffffff) in the context */
+	bank->context.oe = __raw_readl(bank->base + bank->regs->direction);
+	 /* Initialize interface clk ungated, module enabled */
+	if (bank->regs->ctrl)
+		_gpio_rmw(base, bank->regs->ctrl, 0, 1);
 }
 
 static __init void
@@ -1101,8 +990,8 @@ omap_mpuio_alloc_gc(struct gpio_bank *bank, unsigned int irq_start,
 	ct->chip.irq_mask = irq_gc_mask_set_bit;
 	ct->chip.irq_unmask = irq_gc_mask_clr_bit;
 	ct->chip.irq_set_type = gpio_irq_type;
-	/* REVISIT: assuming only 16xx supports MPUIO wake events */
-	if (cpu_is_omap16xx())
+
+	if (bank->regs->wkup_en)
 		ct->chip.irq_set_wake = gpio_wake_enable,
 
 	ct->regs.mask = OMAP_MPUIO_GPIO_INT / bank->stride;
@@ -1115,7 +1004,6 @@ static void __devinit omap_gpio_chip_init(struct gpio_bank *bank)
 	int j;
 	static int gpio;
 
-	bank->mod_usage = 0;
 	/*
 	 * REVISIT eventually switch from OMAP-specific gpio structs
 	 * over to the generic ones
@@ -1128,11 +1016,10 @@ static void __devinit omap_gpio_chip_init(struct gpio_bank *bank)
 	bank->chip.set_debounce = gpio_debounce;
 	bank->chip.set = gpio_set;
 	bank->chip.to_irq = gpio_2irq;
-	if (bank_is_mpuio(bank)) {
+	if (bank->is_mpuio) {
 		bank->chip.label = "mpuio";
-#ifdef CONFIG_ARCH_OMAP16XX
-		bank->chip.dev = &omap_mpuio_device.dev;
-#endif
+		if (bank->regs->wkup_en)
+			bank->chip.dev = &omap_mpuio_device.dev;
 		bank->chip.base = OMAP_MPUIO(0);
 	} else {
 		bank->chip.label = "gpio";
@@ -1147,7 +1034,7 @@ static void __devinit omap_gpio_chip_init(struct gpio_bank *bank)
 		     j < bank->virtual_irq_start + bank->width; j++) {
 		irq_set_lockdep_class(j, &gpio_lock_class);
 		irq_set_chip_data(j, bank);
-		if (bank_is_mpuio(bank)) {
+		if (bank->is_mpuio) {
 			omap_mpuio_alloc_gc(bank, j, bank->width);
 		} else {
 			irq_set_chip(j, &gpio_irq_chip);
@@ -1161,42 +1048,44 @@ static void __devinit omap_gpio_chip_init(struct gpio_bank *bank)
 
 static int __devinit omap_gpio_probe(struct platform_device *pdev)
 {
-	static int gpio_init_done;
 	struct omap_gpio_platform_data *pdata;
 	struct resource *res;
-	int id;
 	struct gpio_bank *bank;
+	int ret = 0;
 
-	if (!pdev->dev.platform_data)
-		return -EINVAL;
-
-	pdata = pdev->dev.platform_data;
-
-	if (!gpio_init_done) {
-		int ret;
-
-		ret = init_gpio_info(pdev);
-		if (ret)
-			return ret;
+	if (!pdev->dev.platform_data) {
+		ret = -EINVAL;
+		goto err_exit;
 	}
 
-	id = pdev->id;
-	bank = &gpio_bank[id];
+	bank = kzalloc(sizeof(struct gpio_bank), GFP_KERNEL);
+	if (!bank) {
+		dev_err(&pdev->dev, "Memory alloc failed for gpio_bank\n");
+		ret = -ENOMEM;
+		goto err_exit;
+	}
 
 	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 	if (unlikely(!res)) {
-		dev_err(&pdev->dev, "GPIO Bank %i Invalid IRQ resource\n", id);
-		return -ENODEV;
+		dev_err(&pdev->dev, "GPIO Bank %i Invalid IRQ resource\n",
+				pdev->id);
+		ret = -ENODEV;
+		goto err_free;
 	}
 
 	bank->irq = res->start;
+	bank->id = pdev->id;
+
+	pdata = pdev->dev.platform_data;
 	bank->virtual_irq_start = pdata->virtual_irq_start;
-	bank->method = pdata->bank_type;
 	bank->dev = &pdev->dev;
 	bank->dbck_flag = pdata->dbck_flag;
 	bank->stride = pdata->bank_stride;
 	bank->width = pdata->bank_width;
-
+	bank->is_mpuio = pdata->is_mpuio;
+	bank->non_wakeup_gpios = pdata->non_wakeup_gpios;
+	bank->loses_context = pdata->loses_context;
+	bank->get_context_loss_count = pdata->get_context_loss_count;
 	bank->regs = pdata->regs;
 
 	if (bank->regs->set_dataout && bank->regs->clr_dataout)
@@ -1209,369 +1098,310 @@ static int __devinit omap_gpio_probe(struct platform_device *pdev)
 	/* Static mapping, never released */
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (unlikely(!res)) {
-		dev_err(&pdev->dev, "GPIO Bank %i Invalid mem resource\n", id);
-		return -ENODEV;
+		dev_err(&pdev->dev, "GPIO Bank %i Invalid mem resource\n",
+				pdev->id);
+		ret = -ENODEV;
+		goto err_free;
 	}
 
 	bank->base = ioremap(res->start, resource_size(res));
 	if (!bank->base) {
-		dev_err(&pdev->dev, "Could not ioremap gpio bank%i\n", id);
-		return -ENOMEM;
+		dev_err(&pdev->dev, "Could not ioremap gpio bank%i\n",
+				pdev->id);
+		ret = -ENOMEM;
+		goto err_free;
 	}
 
+	platform_set_drvdata(pdev, bank);
+
 	pm_runtime_enable(bank->dev);
+	pm_runtime_irq_safe(bank->dev);
 	pm_runtime_get_sync(bank->dev);
 
-	omap_gpio_mod_init(bank, id);
+	if (bank->is_mpuio)
+		mpuio_init(bank);
+
+	omap_gpio_mod_init(bank);
 	omap_gpio_chip_init(bank);
 	omap_gpio_show_rev(bank);
 
-	if (!gpio_init_done)
-		gpio_init_done = 1;
+	pm_runtime_put(bank->dev);
 
-	return 0;
+	list_add_tail(&bank->node, &omap_gpio_list);
+
+	return ret;
+
+err_free:
+	kfree(bank);
+err_exit:
+	return ret;
 }
 
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS)
-static int omap_gpio_suspend(void)
+#ifdef CONFIG_ARCH_OMAP2PLUS
+
+#if defined(CONFIG_PM_SLEEP)
+static int omap_gpio_suspend(struct device *dev)
 {
-	int i;
+	struct platform_device *pdev = to_platform_device(dev);
+	struct gpio_bank *bank = platform_get_drvdata(pdev);
+	void __iomem *base = bank->base;
+	void __iomem *wakeup_enable;
+	unsigned long flags;
 
-	if (!cpu_class_is_omap2() && !cpu_is_omap16xx())
+	if (!bank->mod_usage || !bank->loses_context)
 		return 0;
 
-	for (i = 0; i < gpio_bank_count; i++) {
-		struct gpio_bank *bank = &gpio_bank[i];
-		void __iomem *wake_status;
-		void __iomem *wake_clear;
-		void __iomem *wake_set;
-		unsigned long flags;
-
-		switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP16XX
-		case METHOD_GPIO_1610:
-			wake_status = bank->base + OMAP1610_GPIO_WAKEUPENABLE;
-			wake_clear = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA;
-			wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
-			break;
-#endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-		case METHOD_GPIO_24XX:
-			wake_status = bank->base + OMAP24XX_GPIO_WAKE_EN;
-			wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
-			wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
-			break;
-#endif
-#ifdef CONFIG_ARCH_OMAP4
-		case METHOD_GPIO_44XX:
-			wake_status = bank->base + OMAP4_GPIO_IRQWAKEN0;
-			wake_clear = bank->base + OMAP4_GPIO_IRQWAKEN0;
-			wake_set = bank->base + OMAP4_GPIO_IRQWAKEN0;
-			break;
-#endif
-		default:
-			continue;
-		}
+	if (!bank->regs->wkup_en || !bank->suspend_wakeup)
+		return 0;
 
-		spin_lock_irqsave(&bank->lock, flags);
-		bank->saved_wakeup = __raw_readl(wake_status);
-		__raw_writel(0xffffffff, wake_clear);
-		__raw_writel(bank->suspend_wakeup, wake_set);
-		spin_unlock_irqrestore(&bank->lock, flags);
-	}
+	wakeup_enable = bank->base + bank->regs->wkup_en;
+
+	spin_lock_irqsave(&bank->lock, flags);
+	bank->saved_wakeup = __raw_readl(wakeup_enable);
+	_gpio_rmw(base, bank->regs->wkup_en, 0xffffffff, 0);
+	_gpio_rmw(base, bank->regs->wkup_en, bank->suspend_wakeup, 1);
+	spin_unlock_irqrestore(&bank->lock, flags);
 
 	return 0;
 }
 
-static void omap_gpio_resume(void)
+static int omap_gpio_resume(struct device *dev)
 {
-	int i;
+	struct platform_device *pdev = to_platform_device(dev);
+	struct gpio_bank *bank = platform_get_drvdata(pdev);
+	void __iomem *base = bank->base;
+	unsigned long flags;
 
-	if (!cpu_class_is_omap2() && !cpu_is_omap16xx())
-		return;
+	if (!bank->mod_usage || !bank->loses_context)
+		return 0;
 
-	for (i = 0; i < gpio_bank_count; i++) {
-		struct gpio_bank *bank = &gpio_bank[i];
-		void __iomem *wake_clear;
-		void __iomem *wake_set;
-		unsigned long flags;
-
-		switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP16XX
-		case METHOD_GPIO_1610:
-			wake_clear = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA;
-			wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
-			break;
-#endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-		case METHOD_GPIO_24XX:
-			wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
-			wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
-			break;
-#endif
-#ifdef CONFIG_ARCH_OMAP4
-		case METHOD_GPIO_44XX:
-			wake_clear = bank->base + OMAP4_GPIO_IRQWAKEN0;
-			wake_set = bank->base + OMAP4_GPIO_IRQWAKEN0;
-			break;
-#endif
-		default:
-			continue;
-		}
+	if (!bank->regs->wkup_en || !bank->saved_wakeup)
+		return 0;
 
-		spin_lock_irqsave(&bank->lock, flags);
-		__raw_writel(0xffffffff, wake_clear);
-		__raw_writel(bank->saved_wakeup, wake_set);
-		spin_unlock_irqrestore(&bank->lock, flags);
-	}
-}
+	spin_lock_irqsave(&bank->lock, flags);
+	_gpio_rmw(base, bank->regs->wkup_en, 0xffffffff, 0);
+	_gpio_rmw(base, bank->regs->wkup_en, bank->saved_wakeup, 1);
+	spin_unlock_irqrestore(&bank->lock, flags);
 
-static struct syscore_ops omap_gpio_syscore_ops = {
-	.suspend	= omap_gpio_suspend,
-	.resume		= omap_gpio_resume,
-};
+	return 0;
+}
+#endif /* CONFIG_PM_SLEEP */
 
-#endif
+#if defined(CONFIG_PM_RUNTIME)
+static void omap_gpio_restore_context(struct gpio_bank *bank);
 
-#ifdef CONFIG_ARCH_OMAP2PLUS
+static int omap_gpio_runtime_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct gpio_bank *bank = platform_get_drvdata(pdev);
+	u32 l1 = 0, l2 = 0;
+	unsigned long flags;
 
-static int workaround_enabled;
+	spin_lock_irqsave(&bank->lock, flags);
+	if (bank->power_mode != OFF_MODE) {
+		bank->power_mode = 0;
+		goto update_gpio_context_count;
+	}
+	/*
+	 * If going to OFF, remove triggering for all
+	 * non-wakeup GPIOs.  Otherwise spurious IRQs will be
+	 * generated.  See OMAP2420 Errata item 1.101.
+	 */
+	if (!(bank->enabled_non_wakeup_gpios))
+		goto update_gpio_context_count;
 
-void omap2_gpio_prepare_for_idle(int off_mode)
-{
-	int i, c = 0;
-	int min = 0;
+	bank->saved_datain = __raw_readl(bank->base +
+						bank->regs->datain);
+	l1 = __raw_readl(bank->base + bank->regs->fallingdetect);
+	l2 = __raw_readl(bank->base + bank->regs->risingdetect);
 
-	if (cpu_is_omap34xx())
-		min = 1;
+	bank->saved_fallingdetect = l1;
+	bank->saved_risingdetect = l2;
+	l1 &= ~bank->enabled_non_wakeup_gpios;
+	l2 &= ~bank->enabled_non_wakeup_gpios;
 
-	for (i = min; i < gpio_bank_count; i++) {
-		struct gpio_bank *bank = &gpio_bank[i];
-		u32 l1 = 0, l2 = 0;
-		int j;
+	__raw_writel(l1, bank->base + bank->regs->fallingdetect);
+	__raw_writel(l2, bank->base + bank->regs->risingdetect);
 
-		for (j = 0; j < hweight_long(bank->dbck_enable_mask); j++)
-			clk_disable(bank->dbck);
+	bank->workaround_enabled = true;
 
-		if (!off_mode)
-			continue;
+update_gpio_context_count:
+	if (bank->get_context_loss_count)
+		bank->context_loss_count =
+				bank->get_context_loss_count(bank->dev);
 
-		/* If going to OFF, remove triggering for all
-		 * non-wakeup GPIOs.  Otherwise spurious IRQs will be
-		 * generated.  See OMAP2420 Errata item 1.101. */
-		if (!(bank->enabled_non_wakeup_gpios))
-			continue;
+	_gpio_dbck_disable(bank);
+	spin_unlock_irqrestore(&bank->lock, flags);
 
-		if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
-			bank->saved_datain = __raw_readl(bank->base +
-					OMAP24XX_GPIO_DATAIN);
-			l1 = __raw_readl(bank->base +
-					OMAP24XX_GPIO_FALLINGDETECT);
-			l2 = __raw_readl(bank->base +
-					OMAP24XX_GPIO_RISINGDETECT);
-		}
+	return 0;
+}
 
-		if (cpu_is_omap44xx()) {
-			bank->saved_datain = __raw_readl(bank->base +
-						OMAP4_GPIO_DATAIN);
-			l1 = __raw_readl(bank->base +
-						OMAP4_GPIO_FALLINGDETECT);
-			l2 = __raw_readl(bank->base +
-						OMAP4_GPIO_RISINGDETECT);
-		}
+static int omap_gpio_runtime_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct gpio_bank *bank = platform_get_drvdata(pdev);
+	int context_lost_cnt_after;
+	u32 l = 0, gen, gen0, gen1;
+	unsigned long flags;
 
-		bank->saved_fallingdetect = l1;
-		bank->saved_risingdetect = l2;
-		l1 &= ~bank->enabled_non_wakeup_gpios;
-		l2 &= ~bank->enabled_non_wakeup_gpios;
+	spin_lock_irqsave(&bank->lock, flags);
+	_gpio_dbck_enable(bank);
+	if (!bank->enabled_non_wakeup_gpios || !bank->workaround_enabled) {
+		spin_unlock_irqrestore(&bank->lock, flags);
+		return 0;
+	}
 
-		if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
-			__raw_writel(l1, bank->base +
-					OMAP24XX_GPIO_FALLINGDETECT);
-			__raw_writel(l2, bank->base +
-					OMAP24XX_GPIO_RISINGDETECT);
+	if (bank->get_context_loss_count) {
+		context_lost_cnt_after =
+			bank->get_context_loss_count(bank->dev);
+		if (context_lost_cnt_after != bank->context_loss_count ||
+						!context_lost_cnt_after) {
+			omap_gpio_restore_context(bank);
+		} else {
+			spin_unlock_irqrestore(&bank->lock, flags);
+			return 0;
 		}
+	}
 
-		if (cpu_is_omap44xx()) {
-			__raw_writel(l1, bank->base + OMAP4_GPIO_FALLINGDETECT);
-			__raw_writel(l2, bank->base + OMAP4_GPIO_RISINGDETECT);
-		}
+	__raw_writel(bank->saved_fallingdetect,
+			bank->base + bank->regs->fallingdetect);
+	__raw_writel(bank->saved_risingdetect,
+			bank->base + bank->regs->risingdetect);
+	l = __raw_readl(bank->base + bank->regs->datain);
 
-		c++;
-	}
-	if (!c) {
-		workaround_enabled = 0;
-		return;
-	}
-	workaround_enabled = 1;
-}
+	/*
+	 * Check if any of the non-wakeup interrupt GPIOs have changed
+	 * state.  If so, generate an IRQ by software.  This is
+	 * horribly racy, but it's the best we can do to work around
+	 * this silicon bug.
+	 */
+	l ^= bank->saved_datain;
+	l &= bank->enabled_non_wakeup_gpios;
 
-void omap2_gpio_resume_after_idle(void)
-{
-	int i;
-	int min = 0;
+	/*
+	 * No need to generate IRQs for the rising edge for gpio IRQs
+	 * configured with falling edge only; and vice versa.
+	 */
+	gen0 = l & bank->saved_fallingdetect;
+	gen0 &= bank->saved_datain;
 
-	if (cpu_is_omap34xx())
-		min = 1;
-	for (i = min; i < gpio_bank_count; i++) {
-		struct gpio_bank *bank = &gpio_bank[i];
-		u32 l = 0, gen, gen0, gen1;
-		int j;
+	gen1 = l & bank->saved_risingdetect;
+	gen1 &= ~(bank->saved_datain);
 
-		for (j = 0; j < hweight_long(bank->dbck_enable_mask); j++)
-			clk_enable(bank->dbck);
+	/* FIXME: Consider GPIO IRQs with level detections properly! */
+	gen = l & (~(bank->saved_fallingdetect) & ~(bank->saved_risingdetect));
+	/* Consider all GPIO IRQs needed to be updated */
+	gen |= gen0 | gen1;
 
-		if (!workaround_enabled)
-			continue;
+	if (gen) {
+		u32 old0, old1;
 
-		if (!(bank->enabled_non_wakeup_gpios))
-			continue;
+		old0 = __raw_readl(bank->base + bank->regs->leveldetect0);
+		old1 = __raw_readl(bank->base + bank->regs->leveldetect1);
 
 		if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
-			__raw_writel(bank->saved_fallingdetect,
-				 bank->base + OMAP24XX_GPIO_FALLINGDETECT);
-			__raw_writel(bank->saved_risingdetect,
-				 bank->base + OMAP24XX_GPIO_RISINGDETECT);
-			l = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
+			__raw_writel(old0 | gen, bank->base +
+						bank->regs->leveldetect0);
+			__raw_writel(old1 | gen, bank->base +
+						bank->regs->leveldetect1);
 		}
 
 		if (cpu_is_omap44xx()) {
-			__raw_writel(bank->saved_fallingdetect,
-				 bank->base + OMAP4_GPIO_FALLINGDETECT);
-			__raw_writel(bank->saved_risingdetect,
-				 bank->base + OMAP4_GPIO_RISINGDETECT);
-			l = __raw_readl(bank->base + OMAP4_GPIO_DATAIN);
-		}
-
-		/* Check if any of the non-wakeup interrupt GPIOs have changed
-		 * state.  If so, generate an IRQ by software.  This is
-		 * horribly racy, but it's the best we can do to work around
-		 * this silicon bug. */
-		l ^= bank->saved_datain;
-		l &= bank->enabled_non_wakeup_gpios;
-
-		/*
-		 * No need to generate IRQs for the rising edge for gpio IRQs
-		 * configured with falling edge only; and vice versa.
-		 */
-		gen0 = l & bank->saved_fallingdetect;
-		gen0 &= bank->saved_datain;
-
-		gen1 = l & bank->saved_risingdetect;
-		gen1 &= ~(bank->saved_datain);
-
-		/* FIXME: Consider GPIO IRQs with level detections properly! */
-		gen = l & (~(bank->saved_fallingdetect) &
-				~(bank->saved_risingdetect));
-		/* Consider all GPIO IRQs needed to be updated */
-		gen |= gen0 | gen1;
-
-		if (gen) {
-			u32 old0, old1;
-
-			if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
-				old0 = __raw_readl(bank->base +
-					OMAP24XX_GPIO_LEVELDETECT0);
-				old1 = __raw_readl(bank->base +
-					OMAP24XX_GPIO_LEVELDETECT1);
-				__raw_writel(old0 | gen, bank->base +
-					OMAP24XX_GPIO_LEVELDETECT0);
-				__raw_writel(old1 | gen, bank->base +
-					OMAP24XX_GPIO_LEVELDETECT1);
-				__raw_writel(old0, bank->base +
-					OMAP24XX_GPIO_LEVELDETECT0);
-				__raw_writel(old1, bank->base +
-					OMAP24XX_GPIO_LEVELDETECT1);
-			}
-
-			if (cpu_is_omap44xx()) {
-				old0 = __raw_readl(bank->base +
-						OMAP4_GPIO_LEVELDETECT0);
-				old1 = __raw_readl(bank->base +
-						OMAP4_GPIO_LEVELDETECT1);
-				__raw_writel(old0 | l, bank->base +
-						OMAP4_GPIO_LEVELDETECT0);
-				__raw_writel(old1 | l, bank->base +
-						OMAP4_GPIO_LEVELDETECT1);
-				__raw_writel(old0, bank->base +
-						OMAP4_GPIO_LEVELDETECT0);
-				__raw_writel(old1, bank->base +
-						OMAP4_GPIO_LEVELDETECT1);
-			}
+			__raw_writel(old0 | l, bank->base +
+						bank->regs->leveldetect0);
+			__raw_writel(old1 | l, bank->base +
+						bank->regs->leveldetect1);
 		}
+		__raw_writel(old0, bank->base + bank->regs->leveldetect0);
+		__raw_writel(old1, bank->base + bank->regs->leveldetect1);
 	}
 
+	bank->workaround_enabled = false;
+	spin_unlock_irqrestore(&bank->lock, flags);
+
+	return 0;
 }
+#endif /* CONFIG_PM_RUNTIME */
 
-#endif
+void omap2_gpio_prepare_for_idle(int pwr_mode)
+{
+	struct gpio_bank *bank;
+
+	list_for_each_entry(bank, &omap_gpio_list, node) {
+		if (!bank->mod_usage || !bank->loses_context)
+			continue;
+
+		bank->power_mode = pwr_mode;
+
+		pm_runtime_put_sync_suspend(bank->dev);
+	}
+}
 
-#ifdef CONFIG_ARCH_OMAP3
-/* save the registers of bank 2-6 */
-void omap_gpio_save_context(void)
+void omap2_gpio_resume_after_idle(void)
 {
-	int i;
-
-	/* saving banks from 2-6 only since GPIO1 is in WKUP */
-	for (i = 1; i < gpio_bank_count; i++) {
-		struct gpio_bank *bank = &gpio_bank[i];
-		gpio_context[i].irqenable1 =
-			__raw_readl(bank->base + OMAP24XX_GPIO_IRQENABLE1);
-		gpio_context[i].irqenable2 =
-			__raw_readl(bank->base + OMAP24XX_GPIO_IRQENABLE2);
-		gpio_context[i].wake_en =
-			__raw_readl(bank->base + OMAP24XX_GPIO_WAKE_EN);
-		gpio_context[i].ctrl =
-			__raw_readl(bank->base + OMAP24XX_GPIO_CTRL);
-		gpio_context[i].oe =
-			__raw_readl(bank->base + OMAP24XX_GPIO_OE);
-		gpio_context[i].leveldetect0 =
-			__raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0);
-		gpio_context[i].leveldetect1 =
-			__raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
-		gpio_context[i].risingdetect =
-			__raw_readl(bank->base + OMAP24XX_GPIO_RISINGDETECT);
-		gpio_context[i].fallingdetect =
-			__raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT);
-		gpio_context[i].dataout =
-			__raw_readl(bank->base + OMAP24XX_GPIO_DATAOUT);
+	struct gpio_bank *bank;
+
+	list_for_each_entry(bank, &omap_gpio_list, node) {
+		if (!bank->mod_usage || !bank->loses_context)
+			continue;
+
+		pm_runtime_get_sync(bank->dev);
 	}
 }
 
-/* restore the required registers of bank 2-6 */
-void omap_gpio_restore_context(void)
+#if defined(CONFIG_PM_RUNTIME)
+static void omap_gpio_restore_context(struct gpio_bank *bank)
 {
-	int i;
-
-	for (i = 1; i < gpio_bank_count; i++) {
-		struct gpio_bank *bank = &gpio_bank[i];
-		__raw_writel(gpio_context[i].irqenable1,
-				bank->base + OMAP24XX_GPIO_IRQENABLE1);
-		__raw_writel(gpio_context[i].irqenable2,
-				bank->base + OMAP24XX_GPIO_IRQENABLE2);
-		__raw_writel(gpio_context[i].wake_en,
-				bank->base + OMAP24XX_GPIO_WAKE_EN);
-		__raw_writel(gpio_context[i].ctrl,
-				bank->base + OMAP24XX_GPIO_CTRL);
-		__raw_writel(gpio_context[i].oe,
-				bank->base + OMAP24XX_GPIO_OE);
-		__raw_writel(gpio_context[i].leveldetect0,
-				bank->base + OMAP24XX_GPIO_LEVELDETECT0);
-		__raw_writel(gpio_context[i].leveldetect1,
-				bank->base + OMAP24XX_GPIO_LEVELDETECT1);
-		__raw_writel(gpio_context[i].risingdetect,
-				bank->base + OMAP24XX_GPIO_RISINGDETECT);
-		__raw_writel(gpio_context[i].fallingdetect,
-				bank->base + OMAP24XX_GPIO_FALLINGDETECT);
-		__raw_writel(gpio_context[i].dataout,
-				bank->base + OMAP24XX_GPIO_DATAOUT);
+	__raw_writel(bank->context.wake_en,
+				bank->base + bank->regs->wkup_en);
+	__raw_writel(bank->context.ctrl, bank->base + bank->regs->ctrl);
+	__raw_writel(bank->context.leveldetect0,
+				bank->base + bank->regs->leveldetect0);
+	__raw_writel(bank->context.leveldetect1,
+				bank->base + bank->regs->leveldetect1);
+	__raw_writel(bank->context.risingdetect,
+				bank->base + bank->regs->risingdetect);
+	__raw_writel(bank->context.fallingdetect,
+				bank->base + bank->regs->fallingdetect);
+	if (bank->regs->set_dataout && bank->regs->clr_dataout)
+		__raw_writel(bank->context.dataout,
+				bank->base + bank->regs->set_dataout);
+	else
+		__raw_writel(bank->context.dataout,
+				bank->base + bank->regs->dataout);
+	__raw_writel(bank->context.oe, bank->base + bank->regs->direction);
+
+	if (bank->dbck_enable_mask) {
+		__raw_writel(bank->context.debounce, bank->base +
+					bank->regs->debounce);
+		__raw_writel(bank->context.debounce_en,
+					bank->base + bank->regs->debounce_en);
 	}
+
+	__raw_writel(bank->context.irqenable1,
+				bank->base + bank->regs->irqenable);
+	__raw_writel(bank->context.irqenable2,
+				bank->base + bank->regs->irqenable2);
 }
+#endif /* CONFIG_PM_RUNTIME */
+#else
+#define omap_gpio_suspend NULL
+#define omap_gpio_resume NULL
+#define omap_gpio_runtime_suspend NULL
+#define omap_gpio_runtime_resume NULL
 #endif
 
+static const struct dev_pm_ops gpio_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(omap_gpio_suspend, omap_gpio_resume)
+	SET_RUNTIME_PM_OPS(omap_gpio_runtime_suspend, omap_gpio_runtime_resume,
+									NULL)
+};
+
 static struct platform_driver omap_gpio_driver = {
 	.probe		= omap_gpio_probe,
 	.driver		= {
 		.name	= "omap_gpio",
+		.pm	= &gpio_pm_ops,
 	},
 };
 
@@ -1585,17 +1415,3 @@ static int __init omap_gpio_drv_reg(void)
 	return platform_driver_register(&omap_gpio_driver);
 }
 postcore_initcall(omap_gpio_drv_reg);
-
-static int __init omap_gpio_sysinit(void)
-{
-	mpuio_init();
-
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS)
-	if (cpu_is_omap16xx() || cpu_class_is_omap2())
-		register_syscore_ops(&omap_gpio_syscore_ops);
-#endif
-
-	return 0;
-}
-
-arch_initcall(omap_gpio_sysinit);
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 97b31a0e0525..2a2141915aa0 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -260,7 +260,7 @@ config TOUCHSCREEN_ILI210X
 
 config TOUCHSCREEN_S3C2410
 	tristate "Samsung S3C2410/generic touchscreen input driver"
-	depends on ARCH_S3C2410 || SAMSUNG_DEV_TS
+	depends on ARCH_S3C24XX || SAMSUNG_DEV_TS
 	select S3C_ADC
 	help
 	  Say Y here if you have the s3c2410 touchscreen.
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 589ba02d65a2..2cdcf8c2ed49 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -69,7 +69,7 @@ config LEDS_MIKROTIK_RB532
 config LEDS_S3C24XX
 	tristate "LED Support for Samsung S3C24XX GPIO LEDs"
 	depends on LEDS_CLASS
-	depends on ARCH_S3C2410
+	depends on ARCH_S3C24XX
 	help
 	  This option enables support for LEDs connected to GPIO lines
 	  on Samsung S3C24XX series CPUs, such as the S3C2410 and S3C2440.
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 00fcbed1afd2..ecbee9bf87b2 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -395,7 +395,7 @@ config MMC_SPI
 
 config MMC_S3C
 	tristate "Samsung S3C SD/MMC Card Interface support"
-	depends on ARCH_S3C2410
+	depends on ARCH_S3C24XX
 	help
 	  This selects a driver for the MCI interface found in
           Samsung's S3C2410, S3C2412, S3C2440, S3C2442 CPUs.
diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c
index 947faa5d2ce4..efdb81d21c44 100644
--- a/drivers/mmc/host/at91_mci.c
+++ b/drivers/mmc/host/at91_mci.c
@@ -86,7 +86,6 @@ static inline int at91mci_is_mci1rev2xx(void)
 {
 	return (   cpu_is_at91sam9260()
 		|| cpu_is_at91sam9263()
-		|| cpu_is_at91cap9()
 		|| cpu_is_at91sam9rl()
 		|| cpu_is_at91sam9g10()
 		|| cpu_is_at91sam9g20()
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 3b1d6da874e0..3d8d2d83995f 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -187,7 +187,7 @@ config MTD_NAND_PPCHAMELEONEVB
 
 config MTD_NAND_S3C2410
 	tristate "NAND Flash support for Samsung S3C SoCs"
-	depends on ARCH_S3C2410 || ARCH_S3C64XX
+	depends on ARCH_S3C24XX || ARCH_S3C64XX
 	help
 	  This enables the NAND flash controller on the S3C24xx and S3C64xx
 	  SoCs
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 4f9fb25f945b..4768a9d28375 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -755,7 +755,7 @@ config HAVE_S3C_RTC
 
 config RTC_DRV_S3C
 	tristate "Samsung S3C series SoC RTC"
-	depends on ARCH_S3C2410 || ARCH_S3C64XX || HAVE_S3C_RTC
+	depends on ARCH_S3C64XX || HAVE_S3C_RTC
 	help
 	  RTC (Realtime Clock) driver for the clock inbuilt into the
 	  Samsung S3C24XX series of SoCs. This can provide periodic
diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c
index fb758db9d0f4..44cd81c72ea1 100644
--- a/drivers/rtc/rtc-sa1100.c
+++ b/drivers/rtc/rtc-sa1100.c
@@ -42,67 +42,8 @@
 #define RTC_DEF_TRIM		0
 
 static const unsigned long RTC_FREQ = 1024;
-static struct rtc_time rtc_alarm;
 static DEFINE_SPINLOCK(sa1100_rtc_lock);
 
-static inline int rtc_periodic_alarm(struct rtc_time *tm)
-{
-	return  (tm->tm_year == -1) ||
-		((unsigned)tm->tm_mon >= 12) ||
-		((unsigned)(tm->tm_mday - 1) >= 31) ||
-		((unsigned)tm->tm_hour > 23) ||
-		((unsigned)tm->tm_min > 59) ||
-		((unsigned)tm->tm_sec > 59);
-}
-
-/*
- * Calculate the next alarm time given the requested alarm time mask
- * and the current time.
- */
-static void rtc_next_alarm_time(struct rtc_time *next, struct rtc_time *now,
-	struct rtc_time *alrm)
-{
-	unsigned long next_time;
-	unsigned long now_time;
-
-	next->tm_year = now->tm_year;
-	next->tm_mon = now->tm_mon;
-	next->tm_mday = now->tm_mday;
-	next->tm_hour = alrm->tm_hour;
-	next->tm_min = alrm->tm_min;
-	next->tm_sec = alrm->tm_sec;
-
-	rtc_tm_to_time(now, &now_time);
-	rtc_tm_to_time(next, &next_time);
-
-	if (next_time < now_time) {
-		/* Advance one day */
-		next_time += 60 * 60 * 24;
-		rtc_time_to_tm(next_time, next);
-	}
-}
-
-static int rtc_update_alarm(struct rtc_time *alrm)
-{
-	struct rtc_time alarm_tm, now_tm;
-	unsigned long now, time;
-	int ret;
-
-	do {
-		now = RCNR;
-		rtc_time_to_tm(now, &now_tm);
-		rtc_next_alarm_time(&alarm_tm, &now_tm, alrm);
-		ret = rtc_tm_to_time(&alarm_tm, &time);
-		if (ret != 0)
-			break;
-
-		RTSR = RTSR & (RTSR_HZE|RTSR_ALE|RTSR_AL);
-		RTAR = time;
-	} while (now != RCNR);
-
-	return ret;
-}
-
 static irqreturn_t sa1100_rtc_interrupt(int irq, void *dev_id)
 {
 	struct platform_device *pdev = to_platform_device(dev_id);
@@ -146,9 +87,6 @@ static irqreturn_t sa1100_rtc_interrupt(int irq, void *dev_id)
 
 	rtc_update_irq(rtc, 1, events);
 
-	if (rtsr & RTSR_AL && rtc_periodic_alarm(&rtc_alarm))
-		rtc_update_alarm(&rtc_alarm);
-
 	spin_unlock(&sa1100_rtc_lock);
 
 	return IRQ_HANDLED;
@@ -224,7 +162,6 @@ static int sa1100_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 {
 	u32	rtsr;
 
-	memcpy(&alrm->time, &rtc_alarm, sizeof(struct rtc_time));
 	rtsr = RTSR;
 	alrm->enabled = (rtsr & RTSR_ALE) ? 1 : 0;
 	alrm->pending = (rtsr & RTSR_AL) ? 1 : 0;
@@ -233,16 +170,20 @@ static int sa1100_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 
 static int sa1100_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 {
+	unsigned long time;
 	int ret;
 
 	spin_lock_irq(&sa1100_rtc_lock);
-	ret = rtc_update_alarm(&alrm->time);
-	if (ret == 0) {
-		if (alrm->enabled)
-			RTSR |= RTSR_ALE;
-		else
-			RTSR &= ~RTSR_ALE;
-	}
+	ret = rtc_tm_to_time(&alrm->time, &time);
+	if (ret != 0)
+		goto out;
+	RTSR = RTSR & (RTSR_HZE|RTSR_ALE|RTSR_AL);
+	RTAR = time;
+	if (alrm->enabled)
+		RTSR |= RTSR_ALE;
+	else
+		RTSR &= ~RTSR_ALE;
+out:
 	spin_unlock_irq(&sa1100_rtc_lock);
 
 	return ret;
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 0b06e360628a..3ed748355b98 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -293,7 +293,7 @@ config SPI_RSPI
 
 config SPI_S3C24XX
 	tristate "Samsung S3C24XX series SPI"
-	depends on ARCH_S3C2410 && EXPERIMENTAL
+	depends on ARCH_S3C24XX && EXPERIMENTAL
 	select SPI_BITBANG
 	help
 	  SPI driver for Samsung S3C24XX series ARM SoCs
diff --git a/drivers/spi/spi-s3c24xx.c b/drivers/spi/spi-s3c24xx.c
index fc064535f4fc..8ee7d790ce49 100644
--- a/drivers/spi/spi-s3c24xx.c
+++ b/drivers/spi/spi-s3c24xx.c
@@ -24,10 +24,10 @@
 
 #include <linux/spi/spi.h>
 #include <linux/spi/spi_bitbang.h>
+#include <linux/spi/s3c24xx.h>
 #include <linux/module.h>
 
 #include <plat/regs-spi.h>
-#include <mach/spi.h>
 
 #include <plat/fiq.h>
 #include <asm/fiq.h>
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index e4405e088589..48ac6e781ba2 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -16,7 +16,7 @@ config USB_ARCH_HAS_OHCI
 	# ARM:
 	default y if SA1111
 	default y if ARCH_OMAP
-	default y if ARCH_S3C2410
+	default y if ARCH_S3C24XX
 	default y if PXA27x
 	default y if PXA3xx
 	default y if ARCH_EP93XX
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index c14a3972953a..26c0b75f152e 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -137,7 +137,7 @@ choice
 
 config USB_AT91
 	tristate "Atmel AT91 USB Device Port"
-	depends on ARCH_AT91 && !ARCH_AT91SAM9RL && !ARCH_AT91CAP9 && !ARCH_AT91SAM9G45
+	depends on ARCH_AT91 && !ARCH_AT91SAM9RL && !ARCH_AT91SAM9G45
 	help
 	   Many Atmel AT91 processors (such as the AT91RM2000) have a
 	   full speed USB Device Port with support for five configurable
@@ -150,7 +150,7 @@ config USB_AT91
 config USB_ATMEL_USBA
 	tristate "Atmel USBA"
 	select USB_GADGET_DUALSPEED
-	depends on AVR32 || ARCH_AT91CAP9 || ARCH_AT91SAM9RL || ARCH_AT91SAM9G45
+	depends on AVR32 || ARCH_AT91SAM9RL || ARCH_AT91SAM9G45
 	help
 	  USBA is the integrated high-speed USB Device controller on
 	  the AT32AP700x, some AT91SAM9 and AT91CAP9 processors from Atmel.
@@ -284,7 +284,7 @@ config USB_IMX
 
 config USB_S3C2410
 	tristate "S3C2410 USB Device Controller"
-	depends on ARCH_S3C2410
+	depends on ARCH_S3C24XX
 	help
 	  Samsung's S3C2410 is an ARM-4 processor with an integrated
 	  full speed USB 1.1 device controller.  It has 4 configurable
@@ -299,7 +299,7 @@ config USB_S3C2410_DEBUG
 
 config USB_S3C_HSUDC
 	tristate "S3C2416, S3C2443 and S3C2450 USB Device Controller"
-	depends on ARCH_S3C2410
+	depends on ARCH_S3C24XX
 	select USB_GADGET_DUALSPEED
 	help
 	  Samsung's S3C2416, S3C2443 and S3C2450 is an ARM9 based SoC
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index cd5e382db89c..543e90e336b8 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -1000,7 +1000,7 @@ MODULE_LICENSE ("GPL");
 #define SA1111_DRIVER		ohci_hcd_sa1111_driver
 #endif
 
-#if defined(CONFIG_ARCH_S3C2410) || defined(CONFIG_ARCH_S3C64XX)
+#if defined(CONFIG_ARCH_S3C24XX) || defined(CONFIG_ARCH_S3C64XX)
 #include "ohci-s3c2410.c"
 #define PLATFORM_DRIVER		ohci_hcd_s3c2410_driver
 #endif
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index a8a897ac5446..a290be51a1f4 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -2061,7 +2061,7 @@ config FB_S3C_DEBUG_REGWRITE
 
 config FB_S3C2410
 	tristate "S3C2410 LCD framebuffer support"
-	depends on FB && ARCH_S3C2410
+	depends on FB && ARCH_S3C24XX
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
diff --git a/drivers/video/backlight/ep93xx_bl.c b/drivers/video/backlight/ep93xx_bl.c
index b62b8b9063b5..08214e1f0958 100644
--- a/drivers/video/backlight/ep93xx_bl.c
+++ b/drivers/video/backlight/ep93xx_bl.c
@@ -17,11 +17,6 @@
 #include <linux/fb.h>
 #include <linux/backlight.h>
 
-#include <mach/hardware.h>
-
-#define EP93XX_RASTER_REG(x)		(EP93XX_RASTER_BASE + (x))
-#define EP93XX_RASTER_BRIGHTNESS	EP93XX_RASTER_REG(0x20)
-
 #define EP93XX_MAX_COUNT		255
 #define EP93XX_MAX_BRIGHT		255
 #define EP93XX_DEF_BRIGHT		128
@@ -35,7 +30,7 @@ static int ep93xxbl_set(struct backlight_device *bl, int brightness)
 {
 	struct ep93xxbl *ep93xxbl = bl_get_data(bl);
 
-	__raw_writel((brightness << 8) | EP93XX_MAX_COUNT, ep93xxbl->mmio);
+	writel((brightness << 8) | EP93XX_MAX_COUNT, ep93xxbl->mmio);
 
 	ep93xxbl->brightness = brightness;
 
@@ -70,21 +65,29 @@ static int __init ep93xxbl_probe(struct platform_device *dev)
 	struct ep93xxbl *ep93xxbl;
 	struct backlight_device *bl;
 	struct backlight_properties props;
+	struct resource *res;
 
 	ep93xxbl = devm_kzalloc(&dev->dev, sizeof(*ep93xxbl), GFP_KERNEL);
 	if (!ep93xxbl)
 		return -ENOMEM;
 
+	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENXIO;
+
 	/*
-	 * This register is located in the range already ioremap'ed by
-	 * the framebuffer driver.  A MFD driver seems a bit of overkill
-	 * to handle this so use the static I/O mapping; this address
-	 * is already virtual.
+	 * FIXME - We don't do a request_mem_region here because we are
+	 * sharing the register space with the framebuffer driver (see
+	 * drivers/video/ep93xx-fb.c) and doing so will cause the second
+	 * loaded driver to return -EBUSY.
 	 *
 	 * NOTE: No locking is required; the framebuffer does not touch
 	 * this register.
 	 */
-	ep93xxbl->mmio = EP93XX_RASTER_BRIGHTNESS;
+	ep93xxbl->mmio = devm_ioremap(&dev->dev, res->start,
+				      resource_size(res));
+	if (!ep93xxbl->mmio)
+		return -ENXIO;
 
 	memset(&props, 0, sizeof(struct backlight_properties));
 	props.type = BACKLIGHT_RAW;
diff --git a/drivers/video/ep93xx-fb.c b/drivers/video/ep93xx-fb.c
index 2e830ec52a5a..f8babbeee275 100644
--- a/drivers/video/ep93xx-fb.c
+++ b/drivers/video/ep93xx-fb.c
@@ -519,12 +519,15 @@ static int __devinit ep93xxfb_probe(struct platform_device *pdev)
 		goto failed;
 	}
 
-	res = request_mem_region(res->start, resource_size(res), pdev->name);
-	if (!res) {
-		err = -EBUSY;
-		goto failed;
-	}
-
+	/*
+	 * FIXME - We don't do a request_mem_region here because we are
+	 * sharing the register space with the backlight driver (see
+	 * drivers/video/backlight/ep93xx_bl.c) and doing so will cause
+	 * the second loaded driver to return -EBUSY.
+	 *
+	 * NOTE: No locking is required; the backlight does not touch
+	 * any of the framebuffer registers.
+	 */
 	fbi->res = res;
 	fbi->mmio_base = ioremap(res->start, resource_size(res));
 	if (!fbi->mmio_base) {
@@ -586,8 +589,6 @@ failed:
 		clk_put(fbi->clk);
 	if (fbi->mmio_base)
 		iounmap(fbi->mmio_base);
-	if (fbi->res)
-		release_mem_region(fbi->res->start, resource_size(fbi->res));
 	ep93xxfb_dealloc_videomem(info);
 	if (&info->cmap)
 		fb_dealloc_cmap(&info->cmap);
@@ -608,7 +609,6 @@ static int __devexit ep93xxfb_remove(struct platform_device *pdev)
 	clk_disable(fbi->clk);
 	clk_put(fbi->clk);
 	iounmap(fbi->mmio_base);
-	release_mem_region(fbi->res->start, resource_size(fbi->res));
 	ep93xxfb_dealloc_videomem(info);
 	fb_dealloc_cmap(&info->cmap);
 
diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index bddd64b435b9..ee30937482e1 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -3318,11 +3318,6 @@ static void _omap_dispc_initial_config(void)
 	if (dss_has_feature(FEAT_FUNCGATED))
 		REG_FLD_MOD(DISPC_CONFIG, 1, 9, 9);
 
-	/* L3 firewall setting: enable access to OCM RAM */
-	/* XXX this should be somewhere in plat-omap */
-	if (cpu_is_omap24xx())
-		__raw_writel(0x402000b0, OMAP2_L3_IO_ADDRESS(0x680050a0));
-
 	_dispc_setup_color_conv_coef();
 
 	dispc_set_loadmode(OMAP_DSS_LOAD_FRAME_ONLY);
diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c
index 4a6b5eeef6a7..bd2d5e159463 100644
--- a/drivers/video/omap2/dss/dss.c
+++ b/drivers/video/omap2/dss/dss.c
@@ -33,7 +33,10 @@
 #include <linux/pm_runtime.h>
 
 #include <video/omapdss.h>
+
+#include <plat/cpu.h>
 #include <plat/clock.h>
+
 #include "dss.h"
 #include "dss_features.h"
 
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 7e9e8f4d8f0c..0e7366dfc901 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -170,7 +170,7 @@ config HAVE_S3C2410_WATCHDOG
 
 config S3C2410_WATCHDOG
 	tristate "S3C2410 Watchdog"
-	depends on ARCH_S3C2410 || HAVE_S3C2410_WATCHDOG
+	depends on HAVE_S3C2410_WATCHDOG
 	select WATCHDOG_CORE
 	help
 	  Watchdog timer block in the Samsung SoCs. This will reboot
diff --git a/drivers/watchdog/ep93xx_wdt.c b/drivers/watchdog/ep93xx_wdt.c
index 726b7df61fd0..09cd888db619 100644
--- a/drivers/watchdog/ep93xx_wdt.c
+++ b/drivers/watchdog/ep93xx_wdt.c
@@ -23,6 +23,7 @@
  *	- Add a few missing ioctls
  */
 
+#include <linux/platform_device.h>
 #include <linux/module.h>
 #include <linux/fs.h>
 #include <linux/miscdevice.h>
@@ -30,7 +31,6 @@
 #include <linux/timer.h>
 #include <linux/uaccess.h>
 #include <linux/io.h>
-#include <mach/hardware.h>
 
 #define WDT_VERSION	"0.3"
 #define PFX		"ep93xx_wdt: "
@@ -41,6 +41,7 @@
 static int nowayout = WATCHDOG_NOWAYOUT;
 static int timeout = WDT_TIMEOUT;
 
+static void __iomem *mmio_base;
 static struct timer_list timer;
 static unsigned long next_heartbeat;
 static unsigned long wdt_status;
@@ -49,26 +50,25 @@ static unsigned long boot_status;
 #define WDT_IN_USE		0
 #define WDT_OK_TO_CLOSE		1
 
-#define EP93XX_WDT_REG(x)	(EP93XX_WATCHDOG_BASE + (x))
-#define EP93XX_WDT_WATCHDOG	EP93XX_WDT_REG(0x00)
-#define EP93XX_WDT_WDSTATUS	EP93XX_WDT_REG(0x04)
+#define EP93XX_WATCHDOG		0x00
+#define EP93XX_WDSTATUS		0x04
 
 /* reset the wdt every ~200ms */
 #define WDT_INTERVAL (HZ/5)
 
 static void wdt_enable(void)
 {
-	__raw_writew(0xaaaa, EP93XX_WDT_WATCHDOG);
+	writel(0xaaaa, mmio_base + EP93XX_WATCHDOG);
 }
 
 static void wdt_disable(void)
 {
-	__raw_writew(0xaa55, EP93XX_WDT_WATCHDOG);
+	writel(0xaa55, mmio_base + EP93XX_WATCHDOG);
 }
 
 static inline void wdt_ping(void)
 {
-	__raw_writew(0x5555, EP93XX_WDT_WATCHDOG);
+	writel(0x5555, mmio_base + EP93XX_WATCHDOG);
 }
 
 static void wdt_startup(void)
@@ -206,18 +206,32 @@ static void ep93xx_timer_ping(unsigned long data)
 	mod_timer(&timer, jiffies + WDT_INTERVAL);
 }
 
-static int __init ep93xx_wdt_init(void)
+static int __devinit ep93xx_wdt_probe(struct platform_device *pdev)
 {
+	struct resource *res;
+	unsigned long val;
 	int err;
 
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENXIO;
+
+	if (!devm_request_mem_region(&pdev->dev, res->start,
+				     resource_size(res), pdev->name))
+		return -EBUSY;
+
+	mmio_base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
+	if (!mmio_base)
+		return -ENXIO;
+
 	err = misc_register(&ep93xx_wdt_miscdev);
 
-	boot_status = __raw_readl(EP93XX_WDT_WATCHDOG) & 0x01 ? 1 : 0;
+	val = readl(mmio_base + EP93XX_WATCHDOG);
+	boot_status = val & 0x01 ? 1 : 0;
 
 	printk(KERN_INFO PFX "EP93XX watchdog, driver version "
 		WDT_VERSION "%s\n",
-		(__raw_readl(EP93XX_WDT_WATCHDOG) & 0x08)
-		? " (nCS1 disable detected)" : "");
+		(val & 0x08) ? " (nCS1 disable detected)" : "");
 
 	if (timeout < 1 || timeout > 3600) {
 		timeout = WDT_TIMEOUT;
@@ -230,14 +244,23 @@ static int __init ep93xx_wdt_init(void)
 	return err;
 }
 
-static void __exit ep93xx_wdt_exit(void)
+static int __devexit ep93xx_wdt_remove(struct platform_device *pdev)
 {
 	wdt_shutdown();
 	misc_deregister(&ep93xx_wdt_miscdev);
+	return 0;
 }
 
-module_init(ep93xx_wdt_init);
-module_exit(ep93xx_wdt_exit);
+static struct platform_driver ep93xx_wdt_driver = {
+	.driver		= {
+		.owner	= THIS_MODULE,
+		.name	= "ep93xx-wdt",
+	},
+	.probe		= ep93xx_wdt_probe,
+	.remove		= __devexit_p(ep93xx_wdt_remove),
+};
+
+module_platform_driver(ep93xx_wdt_driver);
 
 module_param(nowayout, int, 0);
 MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started");