ARM: Remove mach-bcmring

Remove mach-bcmring as this is no longer maintained or used.

Signed-off-by: Christian Daudt <csd@broadcom.com>
Reviewed-by: Jiandong Zheng <jdzheng@broadcom.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

1 files changed, 0 insertions, 293 deletions

diff --git a/arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c b/arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c
deleted file mode 100644
index 367df75d4bb3..000000000000
--- a/arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c
+++ /dev/null
@@ -1,293 +0,0 @@
-/*****************************************************************************
-* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-/****************************************************************************/
-/**
-*  @file    chipcHw_init.c
-*
-*  @brief   Low level CHIPC PLL configuration functions
-*
-*  @note
-*
-*   These routines provide basic PLL controlling functionality only.
-*/
-/****************************************************************************/
-
-/* ---- Include Files ---------------------------------------------------- */
-
-#include <csp/errno.h>
-#include <csp/stdint.h>
-#include <csp/module.h>
-
-#include <mach/csp/chipcHw_def.h>
-#include <mach/csp/chipcHw_inline.h>
-
-#include <csp/reg.h>
-#include <csp/delay.h>
-/* ---- Private Constants and Types --------------------------------------- */
-
-/*
-    Calculation for NDIV_i to obtain VCO frequency
-    -----------------------------------------------
-
-	Freq_vco = Freq_ref * (P2 / P1) * (PLL_NDIV_i + PLL_NDIV_f)
-	for Freq_vco = VCO_FREQ_MHz
-		Freq_ref = chipcHw_XTAL_FREQ_Hz
-		PLL_P1 = PLL_P2 = 1
-		and
-		PLL_NDIV_f = 0
-
-	We get:
-		PLL_NDIV_i = Freq_vco / Freq_ref = VCO_FREQ_MHz / chipcHw_XTAL_FREQ_Hz
-
-    Calculation for PLL MDIV to obtain frequency Freq_x for channel x
-    -----------------------------------------------------------------
-		Freq_x = chipcHw_XTAL_FREQ_Hz * PLL_NDIV_i / PLL_MDIV_x = VCO_FREQ_MHz / PLL_MDIV_x
-
-		PLL_MDIV_x = VCO_FREQ_MHz / Freq_x
-*/
-
-/* ---- Private Variables ------------------------------------------------- */
-/****************************************************************************/
-/**
-*  @brief  Initializes the PLL2
-*
-*  This function initializes the PLL2
-*
-*/
-/****************************************************************************/
-void chipcHw_pll2Enable(uint32_t vcoFreqHz)
-{
-	uint32_t pllPreDivider2 = 0;
-
-	{
-		REG_LOCAL_IRQ_SAVE;
-		pChipcHw->PLLConfig2 =
-		    chipcHw_REG_PLL_CONFIG_D_RESET |
-		    chipcHw_REG_PLL_CONFIG_A_RESET;
-
-		pllPreDivider2 = chipcHw_REG_PLL_PREDIVIDER_POWER_DOWN |
-		    chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER |
-		    (chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vcoFreqHz) <<
-		     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) |
-		    (chipcHw_REG_PLL_PREDIVIDER_P1 <<
-		     chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT) |
-		    (chipcHw_REG_PLL_PREDIVIDER_P2 <<
-		     chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT);
-
-		/* Enable CHIPC registers to control the PLL */
-		pChipcHw->PLLStatus |= chipcHw_REG_PLL_STATUS_CONTROL_ENABLE;
-
-		/* Set pre divider to get desired VCO frequency */
-		pChipcHw->PLLPreDivider2 = pllPreDivider2;
-		/* Set NDIV Frac */
-		pChipcHw->PLLDivider2 = chipcHw_REG_PLL_DIVIDER_NDIV_f;
-
-		/* This has to be removed once the default values are fixed for PLL2. */
-		pChipcHw->PLLControl12 = 0x38000700;
-		pChipcHw->PLLControl22 = 0x00000015;
-
-		/* Reset PLL2 */
-		if (vcoFreqHz > chipcHw_REG_PLL_CONFIG_VCO_SPLIT_FREQ) {
-			pChipcHw->PLLConfig2 = chipcHw_REG_PLL_CONFIG_D_RESET |
-			    chipcHw_REG_PLL_CONFIG_A_RESET |
-			    chipcHw_REG_PLL_CONFIG_VCO_1601_3200 |
-			    chipcHw_REG_PLL_CONFIG_POWER_DOWN;
-		} else {
-			pChipcHw->PLLConfig2 = chipcHw_REG_PLL_CONFIG_D_RESET |
-			    chipcHw_REG_PLL_CONFIG_A_RESET |
-			    chipcHw_REG_PLL_CONFIG_VCO_800_1600 |
-			    chipcHw_REG_PLL_CONFIG_POWER_DOWN;
-		}
-		REG_LOCAL_IRQ_RESTORE;
-	}
-
-	/* Insert certain amount of delay before deasserting ARESET. */
-	udelay(1);
-
-	{
-		REG_LOCAL_IRQ_SAVE;
-		/* Remove analog reset and Power on the PLL */
-		pChipcHw->PLLConfig2 &=
-		    ~(chipcHw_REG_PLL_CONFIG_A_RESET |
-		      chipcHw_REG_PLL_CONFIG_POWER_DOWN);
-
-		REG_LOCAL_IRQ_RESTORE;
-
-	}
-
-	/* Wait until PLL is locked */
-	while (!(pChipcHw->PLLStatus2 & chipcHw_REG_PLL_STATUS_LOCKED))
-		;
-
-	{
-		REG_LOCAL_IRQ_SAVE;
-		/* Remove digital reset */
-		pChipcHw->PLLConfig2 &= ~chipcHw_REG_PLL_CONFIG_D_RESET;
-
-		REG_LOCAL_IRQ_RESTORE;
-	}
-}
-
-EXPORT_SYMBOL(chipcHw_pll2Enable);
-
-/****************************************************************************/
-/**
-*  @brief  Initializes the PLL1
-*
-*  This function initializes the PLL1
-*
-*/
-/****************************************************************************/
-void chipcHw_pll1Enable(uint32_t vcoFreqHz, chipcHw_SPREAD_SPECTRUM_e ssSupport)
-{
-	uint32_t pllPreDivider = 0;
-
-	{
-		REG_LOCAL_IRQ_SAVE;
-
-		pChipcHw->PLLConfig =
-		    chipcHw_REG_PLL_CONFIG_D_RESET |
-		    chipcHw_REG_PLL_CONFIG_A_RESET;
-		/* Setting VCO frequency */
-		if (ssSupport == chipcHw_SPREAD_SPECTRUM_ALLOW) {
-			pllPreDivider =
-			    chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASH_1_8 |
-			    ((chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vcoFreqHz) -
-			      1) << chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) |
-			    (chipcHw_REG_PLL_PREDIVIDER_P1 <<
-			     chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT) |
-			    (chipcHw_REG_PLL_PREDIVIDER_P2 <<
-			     chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT);
-		} else {
-			pllPreDivider = chipcHw_REG_PLL_PREDIVIDER_POWER_DOWN |
-			    chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER |
-			    (chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vcoFreqHz) <<
-			     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) |
-			    (chipcHw_REG_PLL_PREDIVIDER_P1 <<
-			     chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT) |
-			    (chipcHw_REG_PLL_PREDIVIDER_P2 <<
-			     chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT);
-		}
-
-		/* Enable CHIPC registers to control the PLL */
-		pChipcHw->PLLStatus |= chipcHw_REG_PLL_STATUS_CONTROL_ENABLE;
-
-		/* Set pre divider to get desired VCO frequency */
-		pChipcHw->PLLPreDivider = pllPreDivider;
-		/* Set NDIV Frac */
-		if (ssSupport == chipcHw_SPREAD_SPECTRUM_ALLOW) {
-			pChipcHw->PLLDivider = chipcHw_REG_PLL_DIVIDER_M1DIV |
-			    chipcHw_REG_PLL_DIVIDER_NDIV_f_SS;
-		} else {
-			pChipcHw->PLLDivider = chipcHw_REG_PLL_DIVIDER_M1DIV |
-			    chipcHw_REG_PLL_DIVIDER_NDIV_f;
-		}
-
-		/* Reset PLL1 */
-		if (vcoFreqHz > chipcHw_REG_PLL_CONFIG_VCO_SPLIT_FREQ) {
-			pChipcHw->PLLConfig = chipcHw_REG_PLL_CONFIG_D_RESET |
-			    chipcHw_REG_PLL_CONFIG_A_RESET |
-			    chipcHw_REG_PLL_CONFIG_VCO_1601_3200 |
-			    chipcHw_REG_PLL_CONFIG_POWER_DOWN;
-		} else {
-			pChipcHw->PLLConfig = chipcHw_REG_PLL_CONFIG_D_RESET |
-			    chipcHw_REG_PLL_CONFIG_A_RESET |
-			    chipcHw_REG_PLL_CONFIG_VCO_800_1600 |
-			    chipcHw_REG_PLL_CONFIG_POWER_DOWN;
-		}
-
-		REG_LOCAL_IRQ_RESTORE;
-
-		/* Insert certain amount of delay before deasserting ARESET. */
-		udelay(1);
-
-		{
-			REG_LOCAL_IRQ_SAVE;
-			/* Remove analog reset and Power on the PLL */
-			pChipcHw->PLLConfig &=
-			    ~(chipcHw_REG_PLL_CONFIG_A_RESET |
-			      chipcHw_REG_PLL_CONFIG_POWER_DOWN);
-			REG_LOCAL_IRQ_RESTORE;
-		}
-
-		/* Wait until PLL is locked */
-		while (!(pChipcHw->PLLStatus & chipcHw_REG_PLL_STATUS_LOCKED)
-		       || !(pChipcHw->
-			    PLLStatus2 & chipcHw_REG_PLL_STATUS_LOCKED))
-			;
-
-		/* Remove digital reset */
-		{
-			REG_LOCAL_IRQ_SAVE;
-			pChipcHw->PLLConfig &= ~chipcHw_REG_PLL_CONFIG_D_RESET;
-			REG_LOCAL_IRQ_RESTORE;
-		}
-	}
-}
-
-EXPORT_SYMBOL(chipcHw_pll1Enable);
-
-/****************************************************************************/
-/**
-*  @brief  Initializes the chipc module
-*
-*  This function initializes the PLLs and core system clocks
-*
-*/
-/****************************************************************************/
-
-void chipcHw_Init(chipcHw_INIT_PARAM_t *initParam	/*  [ IN ] Misc chip initialization parameter */
-    ) {
-#if !(defined(__KERNEL__) && !defined(STANDALONE))
-	delay_init();
-#endif
-
-	/* Do not program PLL, when warm reset */
-	if (!(chipcHw_getStickyBits() & chipcHw_REG_STICKY_CHIP_WARM_RESET)) {
-		chipcHw_pll1Enable(initParam->pllVcoFreqHz,
-				   initParam->ssSupport);
-		chipcHw_pll2Enable(initParam->pll2VcoFreqHz);
-	} else {
-		/* Clear sticky bits */
-		chipcHw_clearStickyBits(chipcHw_REG_STICKY_CHIP_WARM_RESET);
-	}
-	/* Clear sticky bits */
-	chipcHw_clearStickyBits(chipcHw_REG_STICKY_CHIP_SOFT_RESET);
-
-	/* Before configuring the ARM clock, atleast we need to make sure BUS clock maintains the proper ratio with ARM clock */
-	pChipcHw->ACLKClock =
-	    (pChipcHw->
-	     ACLKClock & ~chipcHw_REG_ACLKClock_CLK_DIV_MASK) | (initParam->
-								 armBusRatio &
-								 chipcHw_REG_ACLKClock_CLK_DIV_MASK);
-
-	/* Set various core component frequencies. The order in which this is done is important for some. */
-	/* The RTBUS (DDR PHY) is derived from the BUS, and the BUS from the ARM, and VPM needs to know BUS */
-	/* frequency to find its ratio with the BUS.  Hence we must set the ARM first, followed by the BUS,  */
-	/* then VPM and RTBUS. */
-
-	chipcHw_setClockFrequency(chipcHw_CLOCK_ARM,
-				  initParam->busClockFreqHz *
-				  initParam->armBusRatio);
-	chipcHw_setClockFrequency(chipcHw_CLOCK_BUS, initParam->busClockFreqHz);
-	chipcHw_setClockFrequency(chipcHw_CLOCK_VPM,
-				  initParam->busClockFreqHz *
-				  initParam->vpmBusRatio);
-	chipcHw_setClockFrequency(chipcHw_CLOCK_DDR,
-				  initParam->busClockFreqHz *
-				  initParam->ddrBusRatio);
-	chipcHw_setClockFrequency(chipcHw_CLOCK_RTBUS,
-				  initParam->busClockFreqHz / 2);
-}