Merge branch 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c updates from Wolfram Sang:
 "Highlights from the I2C subsystem for 3.18:

   - new drivers for Axxia AM55xx, and Hisilicon hix5hd2 SoC.

   - designware driver gained AMD support, exynos gained exynos7 support

  The rest is usual driver stuff.  Hopefully no lowlights this time"

* 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: i801: Add Device IDs for Intel Sunrise Point PCH
  i2c: hix5hd2: add i2c controller driver
  i2c-imx: Disable the clock on probe failure
  i2c: designware: Add support for AMD I2C controller
  i2c: designware: Rework probe() to get clock a bit later
  i2c: designware: Default to fast mode in case of ACPI
  i2c: axxia: Add I2C driver for AXM55xx
  i2c: exynos: add support for HSI2C module on Exynos7
  i2c: mxs: detect No Slave Ack on SELECT in PIO mode
  i2c: cros_ec: Remove EC_I2C_FLAG_10BIT
  i2c: cros-ec-tunnel: Add of match table
  i2c: rcar: remove sign-compare flaw
  i2c: ismt: Use minimum descriptor size
  i2c: imx: Add arbitration lost check
  i2c: rk3x: Remove unlikely() annotations
  i2c: rcar: check for no IRQ in rcar_i2c_irq()
  i2c: rcar: make rcar_i2c_prepare_msg() *void*
  i2c: rcar: simplify check for last message
  i2c: designware: add support of platform data to set I2C mode
  i2c: designware: add support of I2C standard mode

19 files changed, 1404 insertions, 51 deletions

diff --git a/Documentation/devicetree/bindings/i2c/i2c-axxia.txt b/Documentation/devicetree/bindings/i2c/i2c-axxia.txt
new file mode 100644
index 000000000000..2296d782b4c2
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-axxia.txt
@@ -0,0 +1,30 @@
+LSI Axxia I2C
+
+Required properties :
+- compatible : Must be "lsi,api2c"
+- reg : Offset and length of the register set for the device
+- interrupts : the interrupt specifier
+- #address-cells : Must be <1>;
+- #size-cells : Must be <0>;
+- clock-names : Must contain "i2c".
+- clocks: Must contain an entry for each name in clock-names. See the common
+  clock bindings.
+
+Optional properties :
+- clock-frequency : Desired I2C bus clock frequency in Hz. If not specified,
+  the default 100 kHz frequency will be used. As only Normal and Fast modes
+  are supported, possible values are 100000 and 400000.
+
+Example :
+
+i2c@02010084000 {
+	compatible = "lsi,api2c";
+	device_type = "i2c";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	reg = <0x20 0x10084000 0x00 0x1000>;
+	interrupts = <0 19 4>;
+	clocks = <&clk_per>;
+	clock-names = "i2c";
+	clock-frequency = <400000>;
+};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-exynos5.txt b/Documentation/devicetree/bindings/i2c/i2c-exynos5.txt
index d4745e31f5c6..2dbc0b62daa6 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-exynos5.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-exynos5.txt
@@ -12,6 +12,8 @@ Required properties:
 				on Exynos5250 and Exynos5420 SoCs.
 	-> "samsung,exynos5260-hsi2c", for i2c compatible with HSI2C available
 				on Exynos5260 SoCs.
+	-> "samsung,exynos7-hsi2c", for i2c compatible with HSI2C available
+				on Exynos7 SoCs.
 
   - reg: physical base address of the controller and length of memory mapped
     region.
diff --git a/Documentation/devicetree/bindings/i2c/i2c-hix5hd2.txt b/Documentation/devicetree/bindings/i2c/i2c-hix5hd2.txt
new file mode 100644
index 000000000000..f98b37401e6e
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-hix5hd2.txt
@@ -0,0 +1,24 @@
+I2C for Hisilicon hix5hd2 chipset platform
+
+Required properties:
+- compatible: Must be "hisilicon,hix5hd2-i2c"
+- reg: physical base address of the controller and length of memory mapped
+     region.
+- interrupts: interrupt number to the cpu.
+- #address-cells = <1>;
+- #size-cells = <0>;
+- clocks: phandles to input clocks.
+
+Optional properties:
+- clock-frequency: Desired I2C bus frequency in Hz, otherwise defaults to 100000
+- Child nodes conforming to i2c bus binding
+
+Examples:
+I2C0@f8b10000 {
+	compatible = "hisilicon,hix5hd2-i2c";
+	reg = <0xf8b10000 0x1000>;
+	interrupts = <0 38 4>;
+	clocks = <&clock HIX5HD2_I2C0_RST>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+}
diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801
index e9c803ea306d..793c83dac738 100644
--- a/Documentation/i2c/busses/i2c-i801
+++ b/Documentation/i2c/busses/i2c-i801
@@ -28,6 +28,7 @@ Supported adapters:
   * Intel Wildcat Point (PCH)
   * Intel Wildcat Point-LP (PCH)
   * Intel BayTrail (SOC)
+  * Intel Sunrise Point-H (PCH)
    Datasheets: Publicly available at the Intel website
 
 On Intel Patsburg and later chipsets, both the normal host SMBus controller
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 2e45ae3796f1..917c3585f45b 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -77,6 +77,16 @@ config I2C_AMD8111
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-amd8111.
 
+config I2C_HIX5HD2
+	tristate "Hix5hd2 high-speed I2C driver"
+	depends on ARCH_HIX5HD2
+	help
+	  Say Y here to include support for high-speed I2C controller in the
+	  Hisilicon based hix5hd2 SoCs.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-hix5hd2.
+
 config I2C_I801
 	tristate "Intel 82801 (ICH/PCH)"
 	depends on PCI
@@ -112,6 +122,7 @@ config I2C_I801
 	    Wildcat Point (PCH)
 	    Wildcat Point-LP (PCH)
 	    BayTrail (SOC)
+	    Sunrise Point-H (PCH)
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-i801.
@@ -337,6 +348,17 @@ config I2C_AU1550
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-au1550.
 
+config I2C_AXXIA
+	tristate "Axxia I2C controller"
+	depends on ARCH_AXXIA || COMPILE_TEST
+	default ARCH_AXXIA
+	help
+	  Say yes if you want to support the I2C bus on Axxia platforms.
+
+	  Please note that this controller is limited to transfers of maximum
+	  255 bytes in length. Any attempt to to a larger transfer will return
+	  an error.
+
 config I2C_BCM2835
 	tristate "Broadcom BCM2835 I2C controller"
 	depends on ARCH_BCM2835
@@ -423,6 +445,7 @@ config I2C_DESIGNWARE_CORE
 config I2C_DESIGNWARE_PLATFORM
 	tristate "Synopsys DesignWare Platform"
 	select I2C_DESIGNWARE_CORE
+	depends on (ACPI && COMMON_CLK) || !ACPI
 	help
 	  If you say yes to this option, support will be included for the
 	  Synopsys DesignWare I2C adapter. Only master mode is supported.
@@ -465,7 +488,7 @@ config I2C_EG20T
 
 config I2C_EXYNOS5
 	tristate "Exynos5 high-speed I2C driver"
-	depends on ARCH_EXYNOS5 && OF
+	depends on ARCH_EXYNOS && OF
 	default y
 	help
 	  High-speed I2C controller on Exynos5 based Samsung SoCs.
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 49bf07e5ef4d..78d56c54ba2b 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -31,6 +31,7 @@ obj-$(CONFIG_I2C_POWERMAC)	+= i2c-powermac.o
 # Embedded system I2C/SMBus host controller drivers
 obj-$(CONFIG_I2C_AT91)		+= i2c-at91.o
 obj-$(CONFIG_I2C_AU1550)	+= i2c-au1550.o
+obj-$(CONFIG_I2C_AXXIA)		+= i2c-axxia.o
 obj-$(CONFIG_I2C_BCM2835)	+= i2c-bcm2835.o
 obj-$(CONFIG_I2C_BLACKFIN_TWI)	+= i2c-bfin-twi.o
 obj-$(CONFIG_I2C_CADENCE)	+= i2c-cadence.o
@@ -47,6 +48,7 @@ obj-$(CONFIG_I2C_EG20T)		+= i2c-eg20t.o
 obj-$(CONFIG_I2C_EXYNOS5)	+= i2c-exynos5.o
 obj-$(CONFIG_I2C_GPIO)		+= i2c-gpio.o
 obj-$(CONFIG_I2C_HIGHLANDER)	+= i2c-highlander.o
+obj-$(CONFIG_I2C_HIX5HD2)	+= i2c-hix5hd2.o
 obj-$(CONFIG_I2C_IBM_IIC)	+= i2c-ibm_iic.o
 obj-$(CONFIG_I2C_IMX)		+= i2c-imx.o
 obj-$(CONFIG_I2C_IOP3XX)	+= i2c-iop3xx.o
diff --git a/drivers/i2c/busses/i2c-axxia.c b/drivers/i2c/busses/i2c-axxia.c
new file mode 100644
index 000000000000..768a598d8d03
--- /dev/null
+++ b/drivers/i2c/busses/i2c-axxia.c
@@ -0,0 +1,559 @@
+/*
+ * This driver implements I2C master functionality using the LSI API2C
+ * controller.
+ *
+ * NOTE: The controller has a limitation in that it can only do transfers of
+ * maximum 255 bytes at a time. If a larger transfer is attempted, error code
+ * (-EINVAL) is returned.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ */
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#define SCL_WAIT_TIMEOUT_NS 25000000
+#define I2C_XFER_TIMEOUT    (msecs_to_jiffies(250))
+#define I2C_STOP_TIMEOUT    (msecs_to_jiffies(100))
+#define FIFO_SIZE           8
+
+#define GLOBAL_CONTROL		0x00
+#define   GLOBAL_MST_EN         BIT(0)
+#define   GLOBAL_SLV_EN         BIT(1)
+#define   GLOBAL_IBML_EN        BIT(2)
+#define INTERRUPT_STATUS	0x04
+#define INTERRUPT_ENABLE	0x08
+#define   INT_SLV               BIT(1)
+#define   INT_MST               BIT(0)
+#define WAIT_TIMER_CONTROL	0x0c
+#define   WT_EN			BIT(15)
+#define   WT_VALUE(_x)		((_x) & 0x7fff)
+#define IBML_TIMEOUT		0x10
+#define IBML_LOW_MEXT		0x14
+#define IBML_LOW_SEXT		0x18
+#define TIMER_CLOCK_DIV		0x1c
+#define I2C_BUS_MONITOR		0x20
+#define SOFT_RESET		0x24
+#define MST_COMMAND		0x28
+#define   CMD_BUSY		(1<<3)
+#define   CMD_MANUAL		(0x00 | CMD_BUSY)
+#define   CMD_AUTO		(0x01 | CMD_BUSY)
+#define MST_RX_XFER		0x2c
+#define MST_TX_XFER		0x30
+#define MST_ADDR_1		0x34
+#define MST_ADDR_2		0x38
+#define MST_DATA		0x3c
+#define MST_TX_FIFO		0x40
+#define MST_RX_FIFO		0x44
+#define MST_INT_ENABLE		0x48
+#define MST_INT_STATUS		0x4c
+#define   MST_STATUS_RFL	(1 << 13) /* RX FIFO serivce */
+#define   MST_STATUS_TFL	(1 << 12) /* TX FIFO service */
+#define   MST_STATUS_SNS	(1 << 11) /* Manual mode done */
+#define   MST_STATUS_SS		(1 << 10) /* Automatic mode done */
+#define   MST_STATUS_SCC	(1 << 9)  /* Stop complete */
+#define   MST_STATUS_IP		(1 << 8)  /* Invalid parameter */
+#define   MST_STATUS_TSS	(1 << 7)  /* Timeout */
+#define   MST_STATUS_AL		(1 << 6)  /* Arbitration lost */
+#define   MST_STATUS_ND		(1 << 5)  /* NAK on data phase */
+#define   MST_STATUS_NA		(1 << 4)  /* NAK on address phase */
+#define   MST_STATUS_NAK	(MST_STATUS_NA | \
+				 MST_STATUS_ND)
+#define   MST_STATUS_ERR	(MST_STATUS_NAK | \
+				 MST_STATUS_AL  | \
+				 MST_STATUS_IP  | \
+				 MST_STATUS_TSS)
+#define MST_TX_BYTES_XFRD	0x50
+#define MST_RX_BYTES_XFRD	0x54
+#define SCL_HIGH_PERIOD		0x80
+#define SCL_LOW_PERIOD		0x84
+#define SPIKE_FLTR_LEN		0x88
+#define SDA_SETUP_TIME		0x8c
+#define SDA_HOLD_TIME		0x90
+
+/**
+ * axxia_i2c_dev - I2C device context
+ * @base: pointer to register struct
+ * @msg: pointer to current message
+ * @msg_xfrd: number of bytes transferred in msg
+ * @msg_err: error code for completed message
+ * @msg_complete: xfer completion object
+ * @dev: device reference
+ * @adapter: core i2c abstraction
+ * @i2c_clk: clock reference for i2c input clock
+ * @bus_clk_rate: current i2c bus clock rate
+ */
+struct axxia_i2c_dev {
+	void __iomem *base;
+	struct i2c_msg *msg;
+	size_t msg_xfrd;
+	int msg_err;
+	struct completion msg_complete;
+	struct device *dev;
+	struct i2c_adapter adapter;
+	struct clk *i2c_clk;
+	u32 bus_clk_rate;
+};
+
+static void i2c_int_disable(struct axxia_i2c_dev *idev, u32 mask)
+{
+	u32 int_en;
+
+	int_en = readl(idev->base + MST_INT_ENABLE);
+	writel(int_en & ~mask, idev->base + MST_INT_ENABLE);
+}
+
+static void i2c_int_enable(struct axxia_i2c_dev *idev, u32 mask)
+{
+	u32 int_en;
+
+	int_en = readl(idev->base + MST_INT_ENABLE);
+	writel(int_en | mask, idev->base + MST_INT_ENABLE);
+}
+
+/**
+ * ns_to_clk - Convert time (ns) to clock cycles for the given clock frequency.
+ */
+static u32 ns_to_clk(u64 ns, u32 clk_mhz)
+{
+	return div_u64(ns * clk_mhz, 1000);
+}
+
+static int axxia_i2c_init(struct axxia_i2c_dev *idev)
+{
+	u32 divisor = clk_get_rate(idev->i2c_clk) / idev->bus_clk_rate;
+	u32 clk_mhz = clk_get_rate(idev->i2c_clk) / 1000000;
+	u32 t_setup;
+	u32 t_high, t_low;
+	u32 tmo_clk;
+	u32 prescale;
+	unsigned long timeout;
+
+	dev_dbg(idev->dev, "rate=%uHz per_clk=%uMHz -> ratio=1:%u\n",
+		idev->bus_clk_rate, clk_mhz, divisor);
+
+	/* Reset controller */
+	writel(0x01, idev->base + SOFT_RESET);
+	timeout = jiffies + msecs_to_jiffies(100);
+	while (readl(idev->base + SOFT_RESET) & 1) {
+		if (time_after(jiffies, timeout)) {
+			dev_warn(idev->dev, "Soft reset failed\n");
+			break;
+		}
+	}
+
+	/* Enable Master Mode */
+	writel(0x1, idev->base + GLOBAL_CONTROL);
+
+	if (idev->bus_clk_rate <= 100000) {
+		/* Standard mode SCL 50/50, tSU:DAT = 250 ns */
+		t_high = divisor * 1 / 2;
+		t_low = divisor * 1 / 2;
+		t_setup = ns_to_clk(250, clk_mhz);
+	} else {
+		/* Fast mode SCL 33/66, tSU:DAT = 100 ns */
+		t_high = divisor * 1 / 3;
+		t_low = divisor * 2 / 3;
+		t_setup = ns_to_clk(100, clk_mhz);
+	}
+
+	/* SCL High Time */
+	writel(t_high, idev->base + SCL_HIGH_PERIOD);
+	/* SCL Low Time */
+	writel(t_low, idev->base + SCL_LOW_PERIOD);
+	/* SDA Setup Time */
+	writel(t_setup, idev->base + SDA_SETUP_TIME);
+	/* SDA Hold Time, 300ns */
+	writel(ns_to_clk(300, clk_mhz), idev->base + SDA_HOLD_TIME);
+	/* Filter <50ns spikes */
+	writel(ns_to_clk(50, clk_mhz), idev->base + SPIKE_FLTR_LEN);
+
+	/* Configure Time-Out Registers */
+	tmo_clk = ns_to_clk(SCL_WAIT_TIMEOUT_NS, clk_mhz);
+
+	/* Find prescaler value that makes tmo_clk fit in 15-bits counter. */
+	for (prescale = 0; prescale < 15; ++prescale) {
+		if (tmo_clk <= 0x7fff)
+			break;
+		tmo_clk >>= 1;
+	}
+	if (tmo_clk > 0x7fff)
+		tmo_clk = 0x7fff;
+
+	/* Prescale divider (log2) */
+	writel(prescale, idev->base + TIMER_CLOCK_DIV);
+	/* Timeout in divided clocks */
+	writel(WT_EN | WT_VALUE(tmo_clk), idev->base + WAIT_TIMER_CONTROL);
+
+	/* Mask all master interrupt bits */
+	i2c_int_disable(idev, ~0);
+
+	/* Interrupt enable */
+	writel(0x01, idev->base + INTERRUPT_ENABLE);
+
+	return 0;
+}
+
+static int i2c_m_rd(const struct i2c_msg *msg)
+{
+	return (msg->flags & I2C_M_RD) != 0;
+}
+
+static int i2c_m_ten(const struct i2c_msg *msg)
+{
+	return (msg->flags & I2C_M_TEN) != 0;
+}
+
+static int i2c_m_recv_len(const struct i2c_msg *msg)
+{
+	return (msg->flags & I2C_M_RECV_LEN) != 0;
+}
+
+/**
+ * axxia_i2c_empty_rx_fifo - Fetch data from RX FIFO and update SMBus block
+ * transfer length if this is the first byte of such a transfer.
+ */
+static int axxia_i2c_empty_rx_fifo(struct axxia_i2c_dev *idev)
+{
+	struct i2c_msg *msg = idev->msg;
+	size_t rx_fifo_avail = readl(idev->base + MST_RX_FIFO);
+	int bytes_to_transfer = min(rx_fifo_avail, msg->len - idev->msg_xfrd);
+
+	while (bytes_to_transfer-- > 0) {
+		int c = readl(idev->base + MST_DATA);
+
+		if (idev->msg_xfrd == 0 && i2c_m_recv_len(msg)) {
+			/*
+			 * Check length byte for SMBus block read
+			 */
+			if (c <= 0 || c > I2C_SMBUS_BLOCK_MAX) {
+				idev->msg_err = -EPROTO;
+				i2c_int_disable(idev, ~0);
+				complete(&idev->msg_complete);
+				break;
+			}
+			msg->len = 1 + c;
+			writel(msg->len, idev->base + MST_RX_XFER);
+		}
+		msg->buf[idev->msg_xfrd++] = c;
+	}
+
+	return 0;
+}
+
+/**
+ * axxia_i2c_fill_tx_fifo - Fill TX FIFO from current message buffer.
+ * @return: Number of bytes left to transfer.
+ */
+static int axxia_i2c_fill_tx_fifo(struct axxia_i2c_dev *idev)
+{
+	struct i2c_msg *msg = idev->msg;
+	size_t tx_fifo_avail = FIFO_SIZE - readl(idev->base + MST_TX_FIFO);
+	int bytes_to_transfer = min(tx_fifo_avail, msg->len - idev->msg_xfrd);
+	int ret = msg->len - idev->msg_xfrd - bytes_to_transfer;
+
+	while (bytes_to_transfer-- > 0)
+		writel(msg->buf[idev->msg_xfrd++], idev->base + MST_DATA);
+
+	return ret;
+}
+
+static irqreturn_t axxia_i2c_isr(int irq, void *_dev)
+{
+	struct axxia_i2c_dev *idev = _dev;
+	u32 status;
+
+	if (!(readl(idev->base + INTERRUPT_STATUS) & INT_MST))
+		return IRQ_NONE;
+
+	/* Read interrupt status bits */
+	status = readl(idev->base + MST_INT_STATUS);
+
+	if (!idev->msg) {
+		dev_warn(idev->dev, "unexpected interrupt\n");
+		goto out;
+	}
+
+	/* RX FIFO needs service? */
+	if (i2c_m_rd(idev->msg) && (status & MST_STATUS_RFL))
+		axxia_i2c_empty_rx_fifo(idev);
+
+	/* TX FIFO needs service? */
+	if (!i2c_m_rd(idev->msg) && (status & MST_STATUS_TFL)) {
+		if (axxia_i2c_fill_tx_fifo(idev) == 0)
+			i2c_int_disable(idev, MST_STATUS_TFL);
+	}
+
+	if (status & MST_STATUS_SCC) {
+		/* Stop completed */
+		i2c_int_disable(idev, ~0);
+		complete(&idev->msg_complete);
+	} else if (status & MST_STATUS_SNS) {
+		/* Transfer done */
+		i2c_int_disable(idev, ~0);
+		if (i2c_m_rd(idev->msg) && idev->msg_xfrd < idev->msg->len)
+			axxia_i2c_empty_rx_fifo(idev);
+		complete(&idev->msg_complete);
+	} else if (unlikely(status & MST_STATUS_ERR)) {
+		/* Transfer error */
+		i2c_int_disable(idev, ~0);
+		if (status & MST_STATUS_AL)
+			idev->msg_err = -EAGAIN;
+		else if (status & MST_STATUS_NAK)
+			idev->msg_err = -ENXIO;
+		else
+			idev->msg_err = -EIO;
+		dev_dbg(idev->dev, "error %#x, addr=%#x rx=%u/%u tx=%u/%u\n",
+			status,
+			idev->msg->addr,
+			readl(idev->base + MST_RX_BYTES_XFRD),
+			readl(idev->base + MST_RX_XFER),
+			readl(idev->base + MST_TX_BYTES_XFRD),
+			readl(idev->base + MST_TX_XFER));
+		complete(&idev->msg_complete);
+	}
+
+out:
+	/* Clear interrupt */
+	writel(INT_MST, idev->base + INTERRUPT_STATUS);
+
+	return IRQ_HANDLED;
+}
+
+static int axxia_i2c_xfer_msg(struct axxia_i2c_dev *idev, struct i2c_msg *msg)
+{
+	u32 int_mask = MST_STATUS_ERR | MST_STATUS_SNS;
+	u32 rx_xfer, tx_xfer;
+	u32 addr_1, addr_2;
+	int ret;
+
+	if (msg->len > 255) {
+		dev_warn(idev->dev, "unsupported length %u\n", msg->len);
+		return -EINVAL;
+	}
+
+	idev->msg = msg;
+	idev->msg_xfrd = 0;
+	idev->msg_err = 0;
+	reinit_completion(&idev->msg_complete);
+
+	if (i2c_m_ten(msg)) {
+		/* 10-bit address
+		 *   addr_1: 5'b11110 | addr[9:8] | (R/nW)
+		 *   addr_2: addr[7:0]
+		 */
+		addr_1 = 0xF0 | ((msg->addr >> 7) & 0x06);
+		addr_2 = msg->addr & 0xFF;
+	} else {
+		/* 7-bit address
+		 *   addr_1: addr[6:0] | (R/nW)
+		 *   addr_2: dont care
+		 */
+		addr_1 = (msg->addr << 1) & 0xFF;
+		addr_2 = 0;
+	}
+
+	if (i2c_m_rd(msg)) {
+		/* I2C read transfer */
+		rx_xfer = i2c_m_recv_len(msg) ? I2C_SMBUS_BLOCK_MAX : msg->len;
+		tx_xfer = 0;
+		addr_1 |= 1;	/* Set the R/nW bit of the address */
+	} else {
+		/* I2C write transfer */
+		rx_xfer = 0;
+		tx_xfer = msg->len;
+	}
+
+	writel(rx_xfer, idev->base + MST_RX_XFER);
+	writel(tx_xfer, idev->base + MST_TX_XFER);
+	writel(addr_1, idev->base + MST_ADDR_1);
+	writel(addr_2, idev->base + MST_ADDR_2);
+
+	if (i2c_m_rd(msg))
+		int_mask |= MST_STATUS_RFL;
+	else if (axxia_i2c_fill_tx_fifo(idev) != 0)
+		int_mask |= MST_STATUS_TFL;
+
+	/* Start manual mode */
+	writel(CMD_MANUAL, idev->base + MST_COMMAND);
+
+	i2c_int_enable(idev, int_mask);
+
+	ret = wait_for_completion_timeout(&idev->msg_complete,
+					  I2C_XFER_TIMEOUT);
+
+	i2c_int_disable(idev, int_mask);
+
+	if (readl(idev->base + MST_COMMAND) & CMD_BUSY)
+		dev_warn(idev->dev, "busy after xfer\n");
+
+	if (ret == 0)
+		idev->msg_err = -ETIMEDOUT;
+
+	if (unlikely(idev->msg_err) && idev->msg_err != -ENXIO)
+		axxia_i2c_init(idev);
+
+	return idev->msg_err;
+}
+
+static int axxia_i2c_stop(struct axxia_i2c_dev *idev)
+{
+	u32 int_mask = MST_STATUS_ERR | MST_STATUS_SCC;
+	int ret;
+
+	reinit_completion(&idev->msg_complete);
+
+	/* Issue stop */
+	writel(0xb, idev->base + MST_COMMAND);
+	i2c_int_enable(idev, int_mask);
+	ret = wait_for_completion_timeout(&idev->msg_complete,
+					  I2C_STOP_TIMEOUT);
+	i2c_int_disable(idev, int_mask);
+	if (ret == 0)
+		return -ETIMEDOUT;
+
+	if (readl(idev->base + MST_COMMAND) & CMD_BUSY)
+		dev_warn(idev->dev, "busy after stop\n");
+
+	return 0;
+}
+
+static int
+axxia_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
+{
+	struct axxia_i2c_dev *idev = i2c_get_adapdata(adap);
+	int i;
+	int ret = 0;
+
+	for (i = 0; ret == 0 && i < num; ++i)
+		ret = axxia_i2c_xfer_msg(idev, &msgs[i]);
+
+	axxia_i2c_stop(idev);
+
+	return ret ? : i;
+}
+
+static u32 axxia_i2c_func(struct i2c_adapter *adap)
+{
+	u32 caps = (I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR |
+		    I2C_FUNC_SMBUS_EMUL | I2C_FUNC_SMBUS_BLOCK_DATA);
+	return caps;
+}
+
+static const struct i2c_algorithm axxia_i2c_algo = {
+	.master_xfer = axxia_i2c_xfer,
+	.functionality = axxia_i2c_func,
+};
+
+static int axxia_i2c_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct axxia_i2c_dev *idev = NULL;
+	struct resource *res;
+	void __iomem *base;
+	int irq;
+	int ret = 0;
+
+	idev = devm_kzalloc(&pdev->dev, sizeof(*idev), GFP_KERNEL);
+	if (!idev)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "missing interrupt resource\n");
+		return irq;
+	}
+
+	idev->i2c_clk = devm_clk_get(&pdev->dev, "i2c");
+	if (IS_ERR(idev->i2c_clk)) {
+		dev_err(&pdev->dev, "missing clock\n");
+		return PTR_ERR(idev->i2c_clk);
+	}
+
+	idev->base = base;
+	idev->dev = &pdev->dev;
+	init_completion(&idev->msg_complete);
+
+	of_property_read_u32(np, "clock-frequency", &idev->bus_clk_rate);
+	if (idev->bus_clk_rate == 0)
+		idev->bus_clk_rate = 100000;	/* default clock rate */
+
+	ret = axxia_i2c_init(idev);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to initialize\n");
+		return ret;
+	}
+
+	ret = devm_request_irq(&pdev->dev, irq, axxia_i2c_isr, 0,
+			       pdev->name, idev);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to claim IRQ%d\n", irq);
+		return ret;
+	}
+
+	clk_prepare_enable(idev->i2c_clk);
+
+	i2c_set_adapdata(&idev->adapter, idev);
+	strlcpy(idev->adapter.name, pdev->name, sizeof(idev->adapter.name));
+	idev->adapter.owner = THIS_MODULE;
+	idev->adapter.algo = &axxia_i2c_algo;
+	idev->adapter.dev.parent = &pdev->dev;
+	idev->adapter.dev.of_node = pdev->dev.of_node;
+
+	platform_set_drvdata(pdev, idev);
+
+	ret = i2c_add_adapter(&idev->adapter);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add adapter\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int axxia_i2c_remove(struct platform_device *pdev)
+{
+	struct axxia_i2c_dev *idev = platform_get_drvdata(pdev);
+
+	clk_disable_unprepare(idev->i2c_clk);
+	i2c_del_adapter(&idev->adapter);
+
+	return 0;
+}
+
+/* Match table for of_platform binding */
+static const struct of_device_id axxia_i2c_of_match[] = {
+	{ .compatible = "lsi,api2c", },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, axxia_i2c_of_match);
+
+static struct platform_driver axxia_i2c_driver = {
+	.probe = axxia_i2c_probe,
+	.remove = axxia_i2c_remove,
+	.driver = {
+		.name = "axxia-i2c",
+		.of_match_table = axxia_i2c_of_match,
+	},
+};
+
+module_platform_driver(axxia_i2c_driver);
+
+MODULE_DESCRIPTION("Axxia I2C Bus driver");
+MODULE_AUTHOR("Anders Berg <anders.berg@lsi.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/i2c/busses/i2c-cros-ec-tunnel.c b/drivers/i2c/busses/i2c-cros-ec-tunnel.c
index 8ca5cbbcec91..875c22ae5400 100644
--- a/drivers/i2c/busses/i2c-cros-ec-tunnel.c
+++ b/drivers/i2c/busses/i2c-cros-ec-tunnel.c
@@ -96,7 +96,7 @@ static int ec_i2c_construct_message(u8 *buf, const struct i2c_msg i2c_msgs[],
 		msg->addr_flags = i2c_msg->addr;
 
 		if (i2c_msg->flags & I2C_M_TEN)
-			msg->addr_flags |= EC_I2C_FLAG_10BIT;
+			return -EINVAL;
 
 		if (i2c_msg->flags & I2C_M_RD) {
 			msg->addr_flags |= EC_I2C_FLAG_READ;
@@ -220,7 +220,9 @@ static int ec_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg i2c_msgs[],
 		}
 	}
 
-	ec_i2c_construct_message(request, i2c_msgs, num, bus_num);
+	result = ec_i2c_construct_message(request, i2c_msgs, num, bus_num);
+	if (result)
+		goto exit;
 
 	msg.version = 0;
 	msg.command = EC_CMD_I2C_PASSTHRU;
@@ -313,11 +315,20 @@ static int ec_i2c_remove(struct platform_device *dev)
 	return 0;
 }
 
+#ifdef CONFIG_OF
+static const struct of_device_id cros_ec_i2c_of_match[] = {
+	{ .compatible = "google,cros-ec-i2c-tunnel" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, cros_ec_i2c_of_match);
+#endif
+
 static struct platform_driver ec_i2c_tunnel_driver = {
 	.probe = ec_i2c_probe,
 	.remove = ec_i2c_remove,
 	.driver = {
 		.name = "cros-ec-i2c-tunnel",
+		.of_match_table = of_match_ptr(cros_ec_i2c_of_match),
 	},
 };
 
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index bc8773333155..a7431150acf7 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -30,6 +30,7 @@
 #include <linux/delay.h>
 #include <linux/i2c.h>
 #include <linux/clk.h>
+#include <linux/clk-provider.h>
 #include <linux/errno.h>
 #include <linux/sched.h>
 #include <linux/err.h>
@@ -41,6 +42,7 @@
 #include <linux/io.h>
 #include <linux/slab.h>
 #include <linux/acpi.h>
+#include <linux/platform_data/i2c-designware.h>
 #include "i2c-designware-core.h"
 
 static struct i2c_algorithm i2c_dw_algo = {
@@ -79,10 +81,7 @@ static void dw_i2c_acpi_params(struct platform_device *pdev, char method[],
 static int dw_i2c_acpi_configure(struct platform_device *pdev)
 {
 	struct dw_i2c_dev *dev = platform_get_drvdata(pdev);
-	bool fs_mode = dev->master_cfg & DW_IC_CON_SPEED_FAST;
-
-	if (!ACPI_HANDLE(&pdev->dev))
-		return -ENODEV;
+	const struct acpi_device_id *id;
 
 	dev->adapter.nr = -1;
 	dev->tx_fifo_depth = 32;
@@ -92,14 +91,33 @@ static int dw_i2c_acpi_configure(struct platform_device *pdev)
 	 * Try to get SDA hold time and *CNT values from an ACPI method if
 	 * it exists for both supported speed modes.
 	 */
-	dw_i2c_acpi_params(pdev, "SSCN", &dev->ss_hcnt, &dev->ss_lcnt,
-			   fs_mode ? NULL : &dev->sda_hold_time);
+	dw_i2c_acpi_params(pdev, "SSCN", &dev->ss_hcnt, &dev->ss_lcnt, NULL);
 	dw_i2c_acpi_params(pdev, "FMCN", &dev->fs_hcnt, &dev->fs_lcnt,
-			   fs_mode ? &dev->sda_hold_time : NULL);
+			   &dev->sda_hold_time);
+
+	/*
+	 * Provide a way for Designware I2C host controllers that are not
+	 * based on Intel LPSS to specify their input clock frequency via
+	 * id->driver_data.
+	 */
+	id = acpi_match_device(pdev->dev.driver->acpi_match_table, &pdev->dev);
+	if (id && id->driver_data)
+		clk_register_fixed_rate(&pdev->dev, dev_name(&pdev->dev), NULL,
+					CLK_IS_ROOT, id->driver_data);
 
 	return 0;
 }
 
+static void dw_i2c_acpi_unconfigure(struct platform_device *pdev)
+{
+	struct dw_i2c_dev *dev = platform_get_drvdata(pdev);
+	const struct acpi_device_id *id;
+
+	id = acpi_match_device(pdev->dev.driver->acpi_match_table, &pdev->dev);
+	if (id && id->driver_data)
+		clk_unregister(dev->clk);
+}
+
 static const struct acpi_device_id dw_i2c_acpi_match[] = {
 	{ "INT33C2", 0 },
 	{ "INT33C3", 0 },
@@ -107,6 +125,7 @@ static const struct acpi_device_id dw_i2c_acpi_match[] = {
 	{ "INT3433", 0 },
 	{ "80860F41", 0 },
 	{ "808622C1", 0 },
+	{ "AMD0010", 133 * 1000 * 1000 },
 	{ }
 };
 MODULE_DEVICE_TABLE(acpi, dw_i2c_acpi_match);
@@ -115,6 +134,7 @@ static inline int dw_i2c_acpi_configure(struct platform_device *pdev)
 {
 	return -ENODEV;
 }
+static inline void dw_i2c_acpi_unconfigure(struct platform_device *pdev) { }
 #endif
 
 static int dw_i2c_probe(struct platform_device *pdev)
@@ -122,7 +142,9 @@ static int dw_i2c_probe(struct platform_device *pdev)
 	struct dw_i2c_dev *dev;
 	struct i2c_adapter *adap;
 	struct resource *mem;
+	struct dw_i2c_platform_data *pdata;
 	int irq, r;
+	u32 clk_freq, ht = 0;
 
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0) {
@@ -145,21 +167,14 @@ static int dw_i2c_probe(struct platform_device *pdev)
 	dev->irq = irq;
 	platform_set_drvdata(pdev, dev);
 
-	dev->clk = devm_clk_get(&pdev->dev, NULL);
-	dev->get_clk_rate_khz = i2c_dw_get_clk_rate_khz;
-
-	if (IS_ERR(dev->clk))
-		return PTR_ERR(dev->clk);
-	clk_prepare_enable(dev->clk);
-
-	if (pdev->dev.of_node) {
-		u32 ht = 0;
-		u32 ic_clk = dev->get_clk_rate_khz(dev);
+	/* fast mode by default because of legacy reasons */
+	clk_freq = 400000;
 
+	if (ACPI_COMPANION(&pdev->dev)) {
+		dw_i2c_acpi_configure(pdev);
+	} else if (pdev->dev.of_node) {
 		of_property_read_u32(pdev->dev.of_node,
 					"i2c-sda-hold-time-ns", &ht);
-		dev->sda_hold_time = div_u64((u64)ic_clk * ht + 500000,
-					     1000000);
 
 		of_property_read_u32(pdev->dev.of_node,
 				     "i2c-sda-falling-time-ns",
@@ -167,6 +182,21 @@ static int dw_i2c_probe(struct platform_device *pdev)
 		of_property_read_u32(pdev->dev.of_node,
 				     "i2c-scl-falling-time-ns",
 				     &dev->scl_falling_time);
+
+		of_property_read_u32(pdev->dev.of_node, "clock-frequency",
+				     &clk_freq);
+
+		/* Only standard mode at 100kHz and fast mode at 400kHz
+		 * are supported.
+		 */
+		if (clk_freq != 100000 && clk_freq != 400000) {
+			dev_err(&pdev->dev, "Only 100kHz and 400kHz supported");
+			return -EINVAL;
+		}
+	} else {
+		pdata = dev_get_platdata(&pdev->dev);
+		if (pdata)
+			clk_freq = pdata->i2c_scl_freq;
 	}
 
 	dev->functionality =
@@ -176,12 +206,27 @@ static int dw_i2c_probe(struct platform_device *pdev)
 		I2C_FUNC_SMBUS_BYTE_DATA |
 		I2C_FUNC_SMBUS_WORD_DATA |
 		I2C_FUNC_SMBUS_I2C_BLOCK;
-	dev->master_cfg =  DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE |
-		DW_IC_CON_RESTART_EN | DW_IC_CON_SPEED_FAST;
+	if (clk_freq == 100000)
+		dev->master_cfg =  DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE |
+			DW_IC_CON_RESTART_EN | DW_IC_CON_SPEED_STD;
+	else
+		dev->master_cfg =  DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE |
+			DW_IC_CON_RESTART_EN | DW_IC_CON_SPEED_FAST;
 
-	/* Try first if we can configure the device from ACPI */
-	r = dw_i2c_acpi_configure(pdev);
-	if (r) {
+	dev->clk = devm_clk_get(&pdev->dev, NULL);
+	dev->get_clk_rate_khz = i2c_dw_get_clk_rate_khz;
+	if (IS_ERR(dev->clk))
+		return PTR_ERR(dev->clk);
+	clk_prepare_enable(dev->clk);
+
+	if (!dev->sda_hold_time && ht) {
+		u32 ic_clk = dev->get_clk_rate_khz(dev);
+
+		dev->sda_hold_time = div_u64((u64)ic_clk * ht + 500000,
+					     1000000);
+	}
+
+	if (!dev->tx_fifo_depth) {
 		u32 param1 = i2c_dw_read_comp_param(dev);
 
 		dev->tx_fifo_depth = ((param1 >> 16) & 0xff) + 1;
@@ -237,6 +282,9 @@ static int dw_i2c_remove(struct platform_device *pdev)
 	pm_runtime_put(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 
+	if (ACPI_COMPANION(&pdev->dev))
+		dw_i2c_acpi_unconfigure(pdev);
+
 	return 0;
 }
 
diff --git a/drivers/i2c/busses/i2c-exynos5.c b/drivers/i2c/busses/i2c-exynos5.c
index 28073f1d6d47..81e6263cd7da 100644
--- a/drivers/i2c/busses/i2c-exynos5.c
+++ b/drivers/i2c/busses/i2c-exynos5.c
@@ -83,7 +83,6 @@
 #define HSI2C_INT_TX_ALMOSTEMPTY_EN		(1u << 0)
 #define HSI2C_INT_RX_ALMOSTFULL_EN		(1u << 1)
 #define HSI2C_INT_TRAILING_EN			(1u << 6)
-#define HSI2C_INT_I2C_EN			(1u << 9)
 
 /* I2C_INT_STAT Register bits */
 #define HSI2C_INT_TX_ALMOSTEMPTY		(1u << 0)
@@ -95,6 +94,17 @@
 #define HSI2C_INT_TRAILING			(1u << 6)
 #define HSI2C_INT_I2C				(1u << 9)
 
+#define HSI2C_INT_TRANS_DONE			(1u << 7)
+#define HSI2C_INT_TRANS_ABORT			(1u << 8)
+#define HSI2C_INT_NO_DEV_ACK			(1u << 9)
+#define HSI2C_INT_NO_DEV			(1u << 10)
+#define HSI2C_INT_TIMEOUT			(1u << 11)
+#define HSI2C_INT_I2C_TRANS			(HSI2C_INT_TRANS_DONE |	\
+						HSI2C_INT_TRANS_ABORT |	\
+						HSI2C_INT_NO_DEV_ACK |	\
+						HSI2C_INT_NO_DEV |	\
+						HSI2C_INT_TIMEOUT)
+
 /* I2C_FIFO_STAT Register bits */
 #define HSI2C_RX_FIFO_EMPTY			(1u << 24)
 #define HSI2C_RX_FIFO_FULL			(1u << 23)
@@ -143,6 +153,8 @@
 
 #define EXYNOS5_I2C_TIMEOUT (msecs_to_jiffies(1000))
 
+#define HSI2C_EXYNOS7	BIT(0)
+
 struct exynos5_i2c {
 	struct i2c_adapter	adap;
 	unsigned int		suspended:1;
@@ -192,6 +204,7 @@ struct exynos5_i2c {
  */
 struct exynos_hsi2c_variant {
 	unsigned int	fifo_depth;
+	unsigned int	hw;
 };
 
 static const struct exynos_hsi2c_variant exynos5250_hsi2c_data = {
@@ -202,6 +215,11 @@ static const struct exynos_hsi2c_variant exynos5260_hsi2c_data = {
 	.fifo_depth	= 16,
 };
 
+static const struct exynos_hsi2c_variant exynos7_hsi2c_data = {
+	.fifo_depth	= 16,
+	.hw		= HSI2C_EXYNOS7,
+};
+
 static const struct of_device_id exynos5_i2c_match[] = {
 	{
 		.compatible = "samsung,exynos5-hsi2c",
@@ -212,6 +230,9 @@ static const struct of_device_id exynos5_i2c_match[] = {
 	}, {
 		.compatible = "samsung,exynos5260-hsi2c",
 		.data = &exynos5260_hsi2c_data
+	}, {
+		.compatible = "samsung,exynos7-hsi2c",
+		.data = &exynos7_hsi2c_data
 	}, {},
 };
 MODULE_DEVICE_TABLE(of, exynos5_i2c_match);
@@ -256,13 +277,24 @@ static int exynos5_i2c_set_timing(struct exynos5_i2c *i2c, int mode)
 				i2c->hs_clock : i2c->fs_clock;
 
 	/*
+	 * In case of HSI2C controller in Exynos5 series
 	 * FPCLK / FI2C =
 	 * (CLK_DIV + 1) * (TSCLK_L + TSCLK_H + 2) + 8 + 2 * FLT_CYCLE
+	 *
+	 * In case of HSI2C controllers in Exynos7 series
+	 * FPCLK / FI2C =
+	 * (CLK_DIV + 1) * (TSCLK_L + TSCLK_H + 2) + 8 + FLT_CYCLE
+	 *
 	 * utemp0 = (CLK_DIV + 1) * (TSCLK_L + TSCLK_H + 2)
 	 * utemp1 = (TSCLK_L + TSCLK_H + 2)
 	 */
 	t_ftl_cycle = (readl(i2c->regs + HSI2C_CONF) >> 16) & 0x7;
-	utemp0 = (clkin / op_clk) - 8 - 2 * t_ftl_cycle;
+	utemp0 = (clkin / op_clk) - 8;
+
+	if (i2c->variant->hw == HSI2C_EXYNOS7)
+		utemp0 -= t_ftl_cycle;
+	else
+		utemp0 -= 2 * t_ftl_cycle;
 
 	/* CLK_DIV max is 256 */
 	for (div = 0; div < 256; div++) {
@@ -407,7 +439,28 @@ static irqreturn_t exynos5_i2c_irq(int irqno, void *dev_id)
 	writel(int_status, i2c->regs + HSI2C_INT_STATUS);
 
 	/* handle interrupt related to the transfer status */
-	if (int_status & HSI2C_INT_I2C) {
+	if (i2c->variant->hw == HSI2C_EXYNOS7) {
+		if (int_status & HSI2C_INT_TRANS_DONE) {
+			i2c->trans_done = 1;
+			i2c->state = 0;
+		} else if (int_status & HSI2C_INT_TRANS_ABORT) {
+			dev_dbg(i2c->dev, "Deal with arbitration lose\n");
+			i2c->state = -EAGAIN;
+			goto stop;
+		} else if (int_status & HSI2C_INT_NO_DEV_ACK) {
+			dev_dbg(i2c->dev, "No ACK from device\n");
+			i2c->state = -ENXIO;
+			goto stop;
+		} else if (int_status & HSI2C_INT_NO_DEV) {
+			dev_dbg(i2c->dev, "No device\n");
+			i2c->state = -ENXIO;
+			goto stop;
+		} else if (int_status & HSI2C_INT_TIMEOUT) {
+			dev_dbg(i2c->dev, "Accessing device timed out\n");
+			i2c->state = -EAGAIN;
+			goto stop;
+		}
+	} else if (int_status & HSI2C_INT_I2C) {
 		trans_status = readl(i2c->regs + HSI2C_TRANS_STATUS);
 		if (trans_status & HSI2C_NO_DEV_ACK) {
 			dev_dbg(i2c->dev, "No ACK from device\n");
@@ -512,12 +565,17 @@ static int exynos5_i2c_wait_bus_idle(struct exynos5_i2c *i2c)
 static void exynos5_i2c_message_start(struct exynos5_i2c *i2c, int stop)
 {
 	u32 i2c_ctl;
-	u32 int_en = HSI2C_INT_I2C_EN;
+	u32 int_en = 0;
 	u32 i2c_auto_conf = 0;
 	u32 fifo_ctl;
 	unsigned long flags;
 	unsigned short trig_lvl;
 
+	if (i2c->variant->hw == HSI2C_EXYNOS7)
+		int_en |= HSI2C_INT_I2C_TRANS;
+	else
+		int_en |= HSI2C_INT_I2C;
+
 	i2c_ctl = readl(i2c->regs + HSI2C_CTL);
 	i2c_ctl &= ~(HSI2C_TXCHON | HSI2C_RXCHON);
 	fifo_ctl = HSI2C_RXFIFO_EN | HSI2C_TXFIFO_EN;
@@ -724,12 +782,13 @@ static int exynos5_i2c_probe(struct platform_device *pdev)
 		goto err_clk;
 	}
 
+	/* Need to check the variant before setting up. */
+	i2c->variant = exynos5_i2c_get_variant(pdev);
+
 	ret = exynos5_hsi2c_clock_setup(i2c);
 	if (ret)
 		goto err_clk;
 
-	i2c->variant = exynos5_i2c_get_variant(pdev);
-
 	exynos5_i2c_reset(i2c);
 
 	ret = i2c_add_adapter(&i2c->adap);
diff --git a/drivers/i2c/busses/i2c-hix5hd2.c b/drivers/i2c/busses/i2c-hix5hd2.c
new file mode 100644
index 000000000000..9490d0f4255c
--- /dev/null
+++ b/drivers/i2c/busses/i2c-hix5hd2.c
@@ -0,0 +1,557 @@
+/*
+ * Copyright (c) 2014 Linaro Ltd.
+ * Copyright (c) 2014 Hisilicon Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Now only support 7 bit address.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+
+/* Register Map */
+#define HIX5I2C_CTRL		0x00
+#define HIX5I2C_COM		0x04
+#define HIX5I2C_ICR		0x08
+#define HIX5I2C_SR		0x0c
+#define HIX5I2C_SCL_H		0x10
+#define HIX5I2C_SCL_L		0x14
+#define HIX5I2C_TXR		0x18
+#define HIX5I2C_RXR		0x1c
+
+/* I2C_CTRL_REG */
+#define I2C_ENABLE		BIT(8)
+#define I2C_UNMASK_TOTAL	BIT(7)
+#define I2C_UNMASK_START	BIT(6)
+#define I2C_UNMASK_END		BIT(5)
+#define I2C_UNMASK_SEND		BIT(4)
+#define I2C_UNMASK_RECEIVE	BIT(3)
+#define I2C_UNMASK_ACK		BIT(2)
+#define I2C_UNMASK_ARBITRATE	BIT(1)
+#define I2C_UNMASK_OVER		BIT(0)
+#define I2C_UNMASK_ALL		(I2C_UNMASK_ACK | I2C_UNMASK_OVER)
+
+/* I2C_COM_REG */
+#define I2C_NO_ACK		BIT(4)
+#define I2C_START		BIT(3)
+#define I2C_READ		BIT(2)
+#define I2C_WRITE		BIT(1)
+#define I2C_STOP		BIT(0)
+
+/* I2C_ICR_REG */
+#define I2C_CLEAR_START		BIT(6)
+#define I2C_CLEAR_END		BIT(5)
+#define I2C_CLEAR_SEND		BIT(4)
+#define I2C_CLEAR_RECEIVE	BIT(3)
+#define I2C_CLEAR_ACK		BIT(2)
+#define I2C_CLEAR_ARBITRATE	BIT(1)
+#define I2C_CLEAR_OVER		BIT(0)
+#define I2C_CLEAR_ALL		(I2C_CLEAR_START | I2C_CLEAR_END | \
+				I2C_CLEAR_SEND | I2C_CLEAR_RECEIVE | \
+				I2C_CLEAR_ACK | I2C_CLEAR_ARBITRATE | \
+				I2C_CLEAR_OVER)
+
+/* I2C_SR_REG */
+#define I2C_BUSY		BIT(7)
+#define I2C_START_INTR		BIT(6)
+#define I2C_END_INTR		BIT(5)
+#define I2C_SEND_INTR		BIT(4)
+#define I2C_RECEIVE_INTR	BIT(3)
+#define I2C_ACK_INTR		BIT(2)
+#define I2C_ARBITRATE_INTR	BIT(1)
+#define I2C_OVER_INTR		BIT(0)
+
+#define HIX5I2C_MAX_FREQ	400000		/* 400k */
+#define HIX5I2C_READ_OPERATION	0x01
+
+enum hix5hd2_i2c_state {
+	HIX5I2C_STAT_RW_ERR = -1,
+	HIX5I2C_STAT_INIT,
+	HIX5I2C_STAT_RW,
+	HIX5I2C_STAT_SND_STOP,
+	HIX5I2C_STAT_RW_SUCCESS,
+};
+
+struct hix5hd2_i2c_priv {
+	struct i2c_adapter adap;
+	struct i2c_msg *msg;
+	struct completion msg_complete;
+	unsigned int msg_idx;
+	unsigned int msg_len;
+	int stop;
+	void __iomem *regs;
+	struct clk *clk;
+	struct device *dev;
+	spinlock_t lock;	/* IRQ synchronization */
+	int err;
+	unsigned int freq;
+	enum hix5hd2_i2c_state state;
+};
+
+static u32 hix5hd2_i2c_clr_pend_irq(struct hix5hd2_i2c_priv *priv)
+{
+	u32 val = readl_relaxed(priv->regs + HIX5I2C_SR);
+
+	writel_relaxed(val, priv->regs + HIX5I2C_ICR);
+
+	return val;
+}
+
+static void hix5hd2_i2c_clr_all_irq(struct hix5hd2_i2c_priv *priv)
+{
+	writel_relaxed(I2C_CLEAR_ALL, priv->regs + HIX5I2C_ICR);
+}
+
+static void hix5hd2_i2c_disable_irq(struct hix5hd2_i2c_priv *priv)
+{
+	writel_relaxed(0, priv->regs + HIX5I2C_CTRL);
+}
+
+static void hix5hd2_i2c_enable_irq(struct hix5hd2_i2c_priv *priv)
+{
+	writel_relaxed(I2C_ENABLE | I2C_UNMASK_TOTAL | I2C_UNMASK_ALL,
+		       priv->regs + HIX5I2C_CTRL);
+}
+
+static void hix5hd2_i2c_drv_setrate(struct hix5hd2_i2c_priv *priv)
+{
+	u32 rate, val;
+	u32 scl, sysclock;
+
+	/* close all i2c interrupt */
+	val = readl_relaxed(priv->regs + HIX5I2C_CTRL);
+	writel_relaxed(val & (~I2C_UNMASK_TOTAL), priv->regs + HIX5I2C_CTRL);
+
+	rate = priv->freq;
+	sysclock = clk_get_rate(priv->clk);
+	scl = (sysclock / (rate * 2)) / 2 - 1;
+	writel_relaxed(scl, priv->regs + HIX5I2C_SCL_H);
+	writel_relaxed(scl, priv->regs + HIX5I2C_SCL_L);
+
+	/* restore original interrupt*/
+	writel_relaxed(val, priv->regs + HIX5I2C_CTRL);
+
+	dev_dbg(priv->dev, "%s: sysclock=%d, rate=%d, scl=%d\n",
+		__func__, sysclock, rate, scl);
+}
+
+static void hix5hd2_i2c_init(struct hix5hd2_i2c_priv *priv)
+{
+	hix5hd2_i2c_disable_irq(priv);
+	hix5hd2_i2c_drv_setrate(priv);
+	hix5hd2_i2c_clr_all_irq(priv);
+	hix5hd2_i2c_enable_irq(priv);
+}
+
+static void hix5hd2_i2c_reset(struct hix5hd2_i2c_priv *priv)
+{
+	clk_disable_unprepare(priv->clk);
+	msleep(20);
+	clk_prepare_enable(priv->clk);
+	hix5hd2_i2c_init(priv);
+}
+
+static int hix5hd2_i2c_wait_bus_idle(struct hix5hd2_i2c_priv *priv)
+{
+	unsigned long stop_time;
+	u32 int_status;
+
+	/* wait for 100 milli seconds for the bus to be idle */
+	stop_time = jiffies + msecs_to_jiffies(100);
+	do {
+		int_status = hix5hd2_i2c_clr_pend_irq(priv);
+		if (!(int_status & I2C_BUSY))
+			return 0;
+
+		usleep_range(50, 200);
+	} while (time_before(jiffies, stop_time));
+
+	return -EBUSY;
+}
+
+static void hix5hd2_rw_over(struct hix5hd2_i2c_priv *priv)
+{
+	if (priv->state == HIX5I2C_STAT_SND_STOP)
+		dev_dbg(priv->dev, "%s: rw and send stop over\n", __func__);
+	else
+		dev_dbg(priv->dev, "%s: have not data to send\n", __func__);
+
+	priv->state = HIX5I2C_STAT_RW_SUCCESS;
+	priv->err = 0;
+}
+
+static void hix5hd2_rw_handle_stop(struct hix5hd2_i2c_priv *priv)
+{
+	if (priv->stop) {
+		priv->state = HIX5I2C_STAT_SND_STOP;
+		writel_relaxed(I2C_STOP, priv->regs + HIX5I2C_COM);
+	} else {
+		hix5hd2_rw_over(priv);
+	}
+}
+
+static void hix5hd2_read_handle(struct hix5hd2_i2c_priv *priv)
+{
+	if (priv->msg_len == 1) {
+		/* the last byte don't need send ACK */
+		writel_relaxed(I2C_READ | I2C_NO_ACK, priv->regs + HIX5I2C_COM);
+	} else if (priv->msg_len > 1) {
+		/* if i2c master receive data will send ACK */
+		writel_relaxed(I2C_READ, priv->regs + HIX5I2C_COM);
+	} else {
+		hix5hd2_rw_handle_stop(priv);
+	}
+}
+
+static void hix5hd2_write_handle(struct hix5hd2_i2c_priv *priv)
+{
+	u8 data;
+
+	if (priv->msg_len > 0) {
+		data = priv->msg->buf[priv->msg_idx++];
+		writel_relaxed(data, priv->regs + HIX5I2C_TXR);
+		writel_relaxed(I2C_WRITE, priv->regs + HIX5I2C_COM);
+	} else {
+		hix5hd2_rw_handle_stop(priv);
+	}
+}
+
+static int hix5hd2_rw_preprocess(struct hix5hd2_i2c_priv *priv)
+{
+	u8 data;
+
+	if (priv->state == HIX5I2C_STAT_INIT) {
+		priv->state = HIX5I2C_STAT_RW;
+	} else if (priv->state == HIX5I2C_STAT_RW) {
+		if (priv->msg->flags & I2C_M_RD) {
+			data = readl_relaxed(priv->regs + HIX5I2C_RXR);
+			priv->msg->buf[priv->msg_idx++] = data;
+		}
+		priv->msg_len--;
+	} else {
+		dev_dbg(priv->dev, "%s: error: priv->state = %d, msg_len = %d\n",
+			__func__, priv->state, priv->msg_len);
+		return -EAGAIN;
+	}
+	return 0;
+}
+
+static irqreturn_t hix5hd2_i2c_irq(int irqno, void *dev_id)
+{
+	struct hix5hd2_i2c_priv *priv = dev_id;
+	u32 int_status;
+	int ret;
+
+	spin_lock(&priv->lock);
+
+	int_status = hix5hd2_i2c_clr_pend_irq(priv);
+
+	/* handle error */
+	if (int_status & I2C_ARBITRATE_INTR) {
+		/* bus error */
+		dev_dbg(priv->dev, "ARB bus loss\n");
+		priv->err = -EAGAIN;
+		priv->state = HIX5I2C_STAT_RW_ERR;
+		goto stop;
+	} else if (int_status & I2C_ACK_INTR) {
+		/* ack error */
+		dev_dbg(priv->dev, "No ACK from device\n");
+		priv->err = -ENXIO;
+		priv->state = HIX5I2C_STAT_RW_ERR;
+		goto stop;
+	}
+
+	if (int_status & I2C_OVER_INTR) {
+		if (priv->msg_len > 0) {
+			ret = hix5hd2_rw_preprocess(priv);
+			if (ret) {
+				priv->err = ret;
+				priv->state = HIX5I2C_STAT_RW_ERR;
+				goto stop;
+			}
+			if (priv->msg->flags & I2C_M_RD)
+				hix5hd2_read_handle(priv);
+			else
+				hix5hd2_write_handle(priv);
+		} else {
+			hix5hd2_rw_over(priv);
+		}
+	}
+
+stop:
+	if ((priv->state == HIX5I2C_STAT_RW_SUCCESS &&
+	     priv->msg->len == priv->msg_idx) ||
+	    (priv->state == HIX5I2C_STAT_RW_ERR)) {
+		hix5hd2_i2c_disable_irq(priv);
+		hix5hd2_i2c_clr_pend_irq(priv);
+		complete(&priv->msg_complete);
+	}
+
+	spin_unlock(&priv->lock);
+
+	return IRQ_HANDLED;
+}
+
+static void hix5hd2_i2c_message_start(struct hix5hd2_i2c_priv *priv, int stop)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	hix5hd2_i2c_clr_all_irq(priv);
+	hix5hd2_i2c_enable_irq(priv);
+
+	if (priv->msg->flags & I2C_M_RD)
+		writel_relaxed((priv->msg->addr << 1) | HIX5I2C_READ_OPERATION,
+			       priv->regs + HIX5I2C_TXR);
+	else
+		writel_relaxed(priv->msg->addr << 1,
+			       priv->regs + HIX5I2C_TXR);
+
+	writel_relaxed(I2C_WRITE | I2C_START, priv->regs + HIX5I2C_COM);
+	spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static int hix5hd2_i2c_xfer_msg(struct hix5hd2_i2c_priv *priv,
+				struct i2c_msg *msgs, int stop)
+{
+	unsigned long timeout;
+	int ret;
+
+	priv->msg = msgs;
+	priv->msg_idx = 0;
+	priv->msg_len = priv->msg->len;
+	priv->stop = stop;
+	priv->err = 0;
+	priv->state = HIX5I2C_STAT_INIT;
+
+	reinit_completion(&priv->msg_complete);
+	hix5hd2_i2c_message_start(priv, stop);
+
+	timeout = wait_for_completion_timeout(&priv->msg_complete,
+					      priv->adap.timeout);
+	if (timeout == 0) {
+		priv->state = HIX5I2C_STAT_RW_ERR;
+		priv->err = -ETIMEDOUT;
+		dev_warn(priv->dev, "%s timeout=%d\n",
+			 msgs->flags & I2C_M_RD ? "rx" : "tx",
+			 priv->adap.timeout);
+	}
+	ret = priv->state;
+
+	/*
+	 * If this is the last message to be transfered (stop == 1)
+	 * Then check if the bus can be brought back to idle.
+	 */
+	if (priv->state == HIX5I2C_STAT_RW_SUCCESS && stop)
+		ret = hix5hd2_i2c_wait_bus_idle(priv);
+
+	if (ret < 0)
+		hix5hd2_i2c_reset(priv);
+
+	return priv->err;
+}
+
+static int hix5hd2_i2c_xfer(struct i2c_adapter *adap,
+			    struct i2c_msg *msgs, int num)
+{
+	struct hix5hd2_i2c_priv *priv = i2c_get_adapdata(adap);
+	int i, ret, stop;
+
+	pm_runtime_get_sync(priv->dev);
+
+	for (i = 0; i < num; i++, msgs++) {
+		stop = (i == num - 1);
+		ret = hix5hd2_i2c_xfer_msg(priv, msgs, stop);
+		if (ret < 0)
+			goto out;
+	}
+
+	if (i == num) {
+		ret = num;
+	} else {
+		/* Only one message, cannot access the device */
+		if (i == 1)
+			ret = -EREMOTEIO;
+		else
+			ret = i;
+
+		dev_warn(priv->dev, "xfer message failed\n");
+	}
+
+out:
+	pm_runtime_mark_last_busy(priv->dev);
+	pm_runtime_put_autosuspend(priv->dev);
+	return ret;
+}
+
+static u32 hix5hd2_i2c_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK);
+}
+
+static const struct i2c_algorithm hix5hd2_i2c_algorithm = {
+	.master_xfer		= hix5hd2_i2c_xfer,
+	.functionality		= hix5hd2_i2c_func,
+};
+
+static int hix5hd2_i2c_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct hix5hd2_i2c_priv *priv;
+	struct resource *mem;
+	unsigned int freq;
+	int irq, ret;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	if (of_property_read_u32(np, "clock-frequency", &freq)) {
+		/* use 100k as default value */
+		priv->freq = 100000;
+	} else {
+		if (freq > HIX5I2C_MAX_FREQ) {
+			priv->freq = HIX5I2C_MAX_FREQ;
+			dev_warn(priv->dev, "use max freq %d instead\n",
+				 HIX5I2C_MAX_FREQ);
+		} else {
+			priv->freq = freq;
+		}
+	}
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->regs = devm_ioremap_resource(&pdev->dev, mem);
+	if (IS_ERR(priv->regs))
+		return PTR_ERR(priv->regs);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq <= 0) {
+		dev_err(&pdev->dev, "cannot find HS-I2C IRQ\n");
+		return irq;
+	}
+
+	priv->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(priv->clk)) {
+		dev_err(&pdev->dev, "cannot get clock\n");
+		return PTR_ERR(priv->clk);
+	}
+	clk_prepare_enable(priv->clk);
+
+	strlcpy(priv->adap.name, "hix5hd2-i2c", sizeof(priv->adap.name));
+	priv->dev = &pdev->dev;
+	priv->adap.owner = THIS_MODULE;
+	priv->adap.algo = &hix5hd2_i2c_algorithm;
+	priv->adap.retries = 3;
+	priv->adap.dev.of_node = np;
+	priv->adap.algo_data = priv;
+	priv->adap.dev.parent = &pdev->dev;
+	i2c_set_adapdata(&priv->adap, priv);
+	platform_set_drvdata(pdev, priv);
+	spin_lock_init(&priv->lock);
+	init_completion(&priv->msg_complete);
+
+	hix5hd2_i2c_init(priv);
+
+	ret = devm_request_irq(&pdev->dev, irq, hix5hd2_i2c_irq,
+			       IRQF_NO_SUSPEND | IRQF_ONESHOT,
+			       dev_name(&pdev->dev), priv);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "cannot request HS-I2C IRQ %d\n", irq);
+		goto err_clk;
+	}
+
+	pm_suspend_ignore_children(&pdev->dev, true);
+	pm_runtime_set_autosuspend_delay(priv->dev, MSEC_PER_SEC);
+	pm_runtime_use_autosuspend(priv->dev);
+	pm_runtime_set_active(priv->dev);
+	pm_runtime_enable(priv->dev);
+
+	ret = i2c_add_adapter(&priv->adap);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to add bus to i2c core\n");
+		goto err_runtime;
+	}
+
+	return ret;
+
+err_runtime:
+	pm_runtime_disable(priv->dev);
+	pm_runtime_set_suspended(priv->dev);
+err_clk:
+	clk_disable_unprepare(priv->clk);
+	return ret;
+}
+
+static int hix5hd2_i2c_remove(struct platform_device *pdev)
+{
+	struct hix5hd2_i2c_priv *priv = platform_get_drvdata(pdev);
+
+	i2c_del_adapter(&priv->adap);
+	pm_runtime_disable(priv->dev);
+	pm_runtime_set_suspended(priv->dev);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int hix5hd2_i2c_runtime_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct hix5hd2_i2c_priv *priv = platform_get_drvdata(pdev);
+
+	clk_disable_unprepare(priv->clk);
+
+	return 0;
+}
+
+static int hix5hd2_i2c_runtime_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct hix5hd2_i2c_priv *priv = platform_get_drvdata(pdev);
+
+	clk_prepare_enable(priv->clk);
+	hix5hd2_i2c_init(priv);
+
+	return 0;
+}
+#endif
+
+static const struct dev_pm_ops hix5hd2_i2c_pm_ops = {
+	SET_PM_RUNTIME_PM_OPS(hix5hd2_i2c_runtime_suspend,
+			      hix5hd2_i2c_runtime_resume,
+			      NULL)
+};
+
+static const struct of_device_id hix5hd2_i2c_match[] = {
+	{ .compatible = "hisilicon,hix5hd2-i2c" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, hix5hd2_i2c_match);
+
+static struct platform_driver hix5hd2_i2c_driver = {
+	.probe		= hix5hd2_i2c_probe,
+	.remove		= hix5hd2_i2c_remove,
+	.driver		= {
+		.name	= "hix5hd2-i2c",
+		.pm	= &hix5hd2_i2c_pm_ops,
+		.of_match_table = hix5hd2_i2c_match,
+	},
+};
+
+module_platform_driver(hix5hd2_i2c_driver);
+
+MODULE_DESCRIPTION("Hix5hd2 I2C Bus driver");
+MODULE_AUTHOR("Wei Yan <sledge.yanwei@huawei.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:i2c-hix5hd2");
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 10467a327749..7cfc183b3d63 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -62,6 +62,7 @@
  * Wildcat Point (PCH)		0x8ca2	32	hard	yes	yes	yes
  * Wildcat Point-LP (PCH)	0x9ca2	32	hard	yes	yes	yes
  * BayTrail (SOC)		0x0f12	32	hard	yes	yes	yes
+ * Sunrise Point-H (PCH) 	0xa123  32	hard	yes	yes	yes
  *
  * Features supported by this driver:
  * Software PEC				no
@@ -184,6 +185,7 @@
 #define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2		0x8d7f
 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS		0x9c22
 #define PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS	0x9ca2
+#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS	0xa123
 
 struct i801_mux_config {
 	char *gpio_chip;
@@ -830,6 +832,7 @@ static const struct pci_device_id i801_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BRASWELL_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS) },
 	{ 0, }
 };
 
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 613069bc561a..c48e46af670a 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -268,6 +268,14 @@ static int i2c_imx_bus_busy(struct imx_i2c_struct *i2c_imx, int for_busy)
 
 	while (1) {
 		temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR);
+
+		/* check for arbitration lost */
+		if (temp & I2SR_IAL) {
+			temp &= ~I2SR_IAL;
+			imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2SR);
+			return -EAGAIN;
+		}
+
 		if (for_busy && (temp & I2SR_IBB))
 			break;
 		if (!for_busy && !(temp & I2SR_IBB))
@@ -702,7 +710,7 @@ static int i2c_imx_probe(struct platform_device *pdev)
 				pdev->name, i2c_imx);
 	if (ret) {
 		dev_err(&pdev->dev, "can't claim irq %d\n", irq);
-		return ret;
+		goto clk_disable;
 	}
 
 	/* Init queue */
@@ -727,7 +735,7 @@ static int i2c_imx_probe(struct platform_device *pdev)
 	ret = i2c_add_numbered_adapter(&i2c_imx->adapter);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "registration failed\n");
-		return ret;
+		goto clk_disable;
 	}
 
 	/* Set up platform driver data */
@@ -741,6 +749,10 @@ static int i2c_imx_probe(struct platform_device *pdev)
 	dev_info(&i2c_imx->adapter.dev, "IMX I2C adapter registered\n");
 
 	return 0;   /* Return OK */
+
+clk_disable:
+	clk_disable_unprepare(i2c_imx->clk);
+	return ret;
 }
 
 static int i2c_imx_remove(struct platform_device *pdev)
diff --git a/drivers/i2c/busses/i2c-ismt.c b/drivers/i2c/busses/i2c-ismt.c
index d9ee43c80cde..3f6ecbfb9a56 100644
--- a/drivers/i2c/busses/i2c-ismt.c
+++ b/drivers/i2c/busses/i2c-ismt.c
@@ -81,7 +81,7 @@
 #define PCI_DEVICE_ID_INTEL_S1200_SMT1	0x0c5a
 #define PCI_DEVICE_ID_INTEL_AVOTON_SMT	0x1f15
 
-#define ISMT_DESC_ENTRIES	32	/* number of descriptor entries */
+#define ISMT_DESC_ENTRIES	2	/* number of descriptor entries */
 #define ISMT_MAX_RETRIES	3	/* number of SMBus retries to attempt */
 
 /* Hardware Descriptor Constants - Control Field */
diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c
index 65a21fed08b5..07e1be6f8992 100644
--- a/drivers/i2c/busses/i2c-mxs.c
+++ b/drivers/i2c/busses/i2c-mxs.c
@@ -307,6 +307,9 @@ static int mxs_i2c_pio_wait_xfer_end(struct mxs_i2c_dev *i2c)
 	unsigned long timeout = jiffies + msecs_to_jiffies(1000);
 
 	while (readl(i2c->regs + MXS_I2C_CTRL0) & MXS_I2C_CTRL0_RUN) {
+		if (readl(i2c->regs + MXS_I2C_CTRL1) &
+				MXS_I2C_CTRL1_NO_SLAVE_ACK_IRQ)
+			return -ENXIO;
 		if (time_after(jiffies, timeout))
 			return -ETIMEDOUT;
 		cond_resched();
diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c
index e506fcd3ca04..d826e82dd997 100644
--- a/drivers/i2c/busses/i2c-rcar.c
+++ b/drivers/i2c/busses/i2c-rcar.c
@@ -195,7 +195,7 @@ static int rcar_i2c_clock_calculate(struct rcar_i2c_priv *priv,
 	 */
 	rate = clk_get_rate(priv->clk);
 	cdf = rate / 20000000;
-	if (cdf >= 1 << cdf_width) {
+	if (cdf >= 1U << cdf_width) {
 		dev_err(dev, "Input clock %lu too high\n", rate);
 		return -EIO;
 	}
@@ -245,7 +245,7 @@ scgd_find:
 	return 0;
 }
 
-static int rcar_i2c_prepare_msg(struct rcar_i2c_priv *priv)
+static void rcar_i2c_prepare_msg(struct rcar_i2c_priv *priv)
 {
 	int read = !!rcar_i2c_is_recv(priv);
 
@@ -253,8 +253,6 @@ static int rcar_i2c_prepare_msg(struct rcar_i2c_priv *priv)
 	rcar_i2c_write(priv, ICMSR, 0);
 	rcar_i2c_write(priv, ICMCR, RCAR_BUS_PHASE_START);
 	rcar_i2c_write(priv, ICMIER, read ? RCAR_IRQ_RECV : RCAR_IRQ_SEND);
-
-	return 0;
 }
 
 /*
@@ -365,6 +363,7 @@ static int rcar_i2c_irq_recv(struct rcar_i2c_priv *priv, u32 msr)
 static irqreturn_t rcar_i2c_irq(int irq, void *ptr)
 {
 	struct rcar_i2c_priv *priv = ptr;
+	irqreturn_t result = IRQ_HANDLED;
 	u32 msr;
 
 	/*-------------- spin lock -----------------*/
@@ -374,6 +373,10 @@ static irqreturn_t rcar_i2c_irq(int irq, void *ptr)
 
 	/* Only handle interrupts that are currently enabled */
 	msr &= rcar_i2c_read(priv, ICMIER);
+	if (!msr) {
+		result = IRQ_NONE;
+		goto exit;
+	}
 
 	/* Arbitration lost */
 	if (msr & MAL) {
@@ -408,10 +411,11 @@ out:
 		wake_up(&priv->wait);
 	}
 
+exit:
 	spin_unlock(&priv->lock);
 	/*-------------- spin unlock -----------------*/
 
-	return IRQ_HANDLED;
+	return result;
 }
 
 static int rcar_i2c_master_xfer(struct i2c_adapter *adap,
@@ -453,17 +457,14 @@ static int rcar_i2c_master_xfer(struct i2c_adapter *adap,
 		priv->msg	= &msgs[i];
 		priv->pos	= 0;
 		priv->flags	= 0;
-		if (priv->msg == &msgs[num - 1])
+		if (i == num - 1)
 			rcar_i2c_flags_set(priv, ID_LAST_MSG);
 
-		ret = rcar_i2c_prepare_msg(priv);
+		rcar_i2c_prepare_msg(priv);
 
 		spin_unlock_irqrestore(&priv->lock, flags);
 		/*-------------- spin unlock -----------------*/
 
-		if (ret < 0)
-			break;
-
 		timeout = wait_event_timeout(priv->wait,
 					     rcar_i2c_flags_has(priv, ID_DONE),
 					     5 * HZ);
diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c
index b38b0529946a..f486d0eac4d0 100644
--- a/drivers/i2c/busses/i2c-rk3x.c
+++ b/drivers/i2c/busses/i2c-rk3x.c
@@ -208,7 +208,7 @@ static void rk3x_i2c_prepare_read(struct rk3x_i2c *i2c)
 	 * The hw can read up to 32 bytes at a time. If we need more than one
 	 * chunk, send an ACK after the last byte of the current chunk.
 	 */
-	if (unlikely(len > 32)) {
+	if (len > 32) {
 		len = 32;
 		con &= ~REG_CON_LASTACK;
 	} else {
@@ -403,7 +403,7 @@ static irqreturn_t rk3x_i2c_irq(int irqno, void *dev_id)
 	}
 
 	/* is there anything left to handle? */
-	if (unlikely((ipd & REG_INT_ALL) == 0))
+	if ((ipd & REG_INT_ALL) == 0)
 		goto out;
 
 	switch (i2c->state) {
diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index 7853a6410d14..a49cd41feea7 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -1928,9 +1928,6 @@ struct ec_response_power_info {
 
 #define EC_CMD_I2C_PASSTHRU 0x9e
 
-/* Slave address is 10 (not 7) bit */
-#define EC_I2C_FLAG_10BIT	(1 << 16)
-
 /* Read data; if not present, message is a write */
 #define EC_I2C_FLAG_READ	(1 << 15)
 
diff --git a/include/linux/platform_data/i2c-designware.h b/include/linux/platform_data/i2c-designware.h
new file mode 100644
index 000000000000..7a61fb27c25b
--- /dev/null
+++ b/include/linux/platform_data/i2c-designware.h
@@ -0,0 +1,21 @@
+/*
+ * Copyright(c) 2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef I2C_DESIGNWARE_H
+#define I2C_DESIGNWARE_H
+
+struct dw_i2c_platform_data {
+	unsigned int i2c_scl_freq;
+};
+
+#endif