Zap toys/Config.in and instead create generated/Config.in from contents of

toys/*.c.  Move relevant info into comment at the top of each toys/*.c.  Also
convert more of Makefile into a thin wrapper around shell scripts that actually
do the work.  (Makefile is only still there for the user interface.)

41 files changed, 831 insertions, 768 deletions

diff --git a/Config.in b/Config.in
index 62c2ec0..aa3100f 100644
--- a/Config.in
+++ b/Config.in
@@ -2,21 +2,14 @@ mainmenu "ToyBox Configuration"
 
 menu "Global settings"
 
-config HELP
-	bool "help"
-	default y
-	help
-	  usage: help [command]
-
-	  Show usage information for toybox commands.
-
-config HELP_LONG
-	bool "Verbose help text"
-	default y
-	depends on HELP
+config TOYBOX
+	bool
+	default n
 	help
-	  Show more than one line of help information per command.
+	  usage: toybox [command] [arguments...]
 
+	  With no arguments, shows available commands.  First argument is
+	  name of a command to run, followed by any arguments to that command.
 
 config TOYBOX_FREE
 	bool "Free memory unnecessarily"
@@ -36,4 +29,6 @@ config TOYBOX_DEBUG
 
 endmenu
 
-source toys/Config.in
+menu "Toys"
+source generated/Config.in
+endmenu
diff --git a/Makefile b/Makefile
index 7e91ded..b893600 100644
--- a/Makefile
+++ b/Makefile
@@ -1,39 +1,21 @@
 # Makefile for toybox.
 # Copyright 2006 Rob Landley <rob@landley.net>
 
-CFLAGS  := $(CFLAGS) -Wall -Wundef -Wno-char-subscripts
-CCFLAGS = $(CFLAGS) -funsigned-char
-OPTIMIZE = -Os -ffunction-sections -fdata-sections -Wl,--gc-sections
-CC      = $(CROSS_COMPILE)gcc
-STRIP   = $(CROSS_COMPILE)strip
-HOSTCC  = gcc
-
-# A synonym.
-CROSS_COMPILE = $(CROSS)
-
 all: toybox
 
-.PHONY: clean distclean baseline bloatcheck install_flat test tests help
+toybox toybox_unstripped:
+	scripts/make.sh
 
-include kconfig/Makefile
+.PHONY: clean distclean baseline bloatcheck install_flat test tests help \
+	toybox toybox_unstripped
 
-# defconfig is the "maximum sane config"; allyesconfig minus debugging and such.
-#defconfig: allyesconfig
-#	@sed -i -r -e "s/^(CONFIG_TOYBOX_(DEBUG|FREE))=.*/# \1 is not set/" .config
+include kconfig/Makefile
 
-.config: Config.in toys/Config.in
+$(KCONFIG_TOP): generated/Config.in
+generated/Config.in:
+	scripts/genconfig.sh
 
-# The long and roundabout sed is to make old versions of sed happy.  New ones
-# have '\n' so can replace one line with two without all the branches and
-# mucking about with hold space.
-generated/gen_config.h: .config
-	sed -n -e 's/^# CONFIG_\(.*\) is not set.*/\1/' \
-	  -e 't notset' -e 'b tryisset' -e ':notset' \
-	  -e 'h' -e 's/.*/#define CFG_& 0/p' \
-	  -e 'g' -e 's/.*/#define USE_&(...)/p' -e 'd' -e ':tryisset' \
-	  -e 's/^CONFIG_\(.*\)=y.*/\1/' -e 't isset' -e 'd' -e ':isset' \
-	  -e 'h' -e 's/.*/#define CFG_& 1/p' \
-	  -e 'g' -e 's/.*/#define USE_&(...) __VA_ARGS__/p' $< > $@
+HOSTCC:=cc
 
 # Development targets
 baseline: toybox_unstripped
@@ -42,24 +24,6 @@ baseline: toybox_unstripped
 bloatcheck: toybox_old toybox_unstripped
 	@scripts/bloat-o-meter toybox_old toybox_unstripped
 
-# Get list of .c files to compile, including toys/*.c files from .config
-toyfiles = main.c lib/*.c \
-	$(shell scripts/cfg2files.sh < .config | sed 's@\(.*\)@toys/\1.c@')
-
-# The following still depends on generated/help.h even when it's not there, so
-# *.h isn't sufficient by itself.
-
-toybox_unstripped: generated/gen_config.h generated/help.h $(toyfiles) toys/toylist.h toys/*.h lib/*.h toys.h
-	$(CC) $(CCFLAGS) -I . $(toyfiles) -o toybox_unstripped $(OPTIMIZE)
-
-toybox: toybox_unstripped
-	$(STRIP) toybox_unstripped -o toybox
-
-toys/help.c: generated/help.h
-
-generated/help.h: Config.in toys/Config.in scripts/config2help.py
-	scripts/config2help.py Config.in > generated/help.h
-
 instlist: toybox
 	$(HOSTCC) $(CCFLAGS) -I . scripts/install.c -o instlist
 
@@ -69,7 +33,8 @@ install_flat: instlist
 	@for i in `./instlist`; do ln -s toybox "$(PREFIX)/$$i"; done
 
 clean::
-	rm -f toybox toybox_unstripped generated/gen_config.h instlist
+	rm -f toybox toybox_unstripped generated/config.h generated/Config.in \
+		instlist
 
 distclean: clean
 	rm -f toybox_old .config* generated/help.h
@@ -80,5 +45,10 @@ tests:
 	scripts/testall.sh
 
 help::
+	@echo  '  toybox          - Build toybox.'
 	@echo  '  baseline        - Create busybox_old for use by bloatcheck.'
 	@echo  '  bloatcheck      - Report size differences between old and current versions'
+	@echo  '  test            - Run test suite against compiled commands.'
+	@echo  '  clean           - Delete temporary files.'
+	@echo  '  distclean       - Delete everything that isn't shipped.'
+	@echo  '  install_flat    - Install toybox into $PREFIX directory.'
diff --git a/configure b/configure
new file mode 100644
index 0000000..c9990f2
--- /dev/null
+++ b/configure
@@ -0,0 +1,13 @@
+# Toybox configuration file.
+
+# This sets environment variables used by scripts/make.sh
+
+# A synonym.
+[ -z "$CROSS_COMPILE" ] && CROSS_COMPILE="$CROSS"
+
+[ -z "$CFLAGS" ] && CFLAGS="-Wall -Wundef -Wno-char-subscripts"
+CFLAGS="$CFLAGS -funsigned-char"
+[ -z "$OPTIMIZE" ] && OPTIMIZE="-Os -ffunction-sections -fdata-sections -Wl,--gc-sections"
+[ -z "$CC" ] && CC="${CROSS_COMPILE}gcc"
+[ -z "$STRIP" ] && STRIP="${CROSS_COMPILE}strip"
+[ -z "$HOSTCC" ] && HOSTCC=gcc
diff --git a/kconfig/Makefile b/kconfig/Makefile
index 7fc3fac..7eaee95 100644
--- a/kconfig/Makefile
+++ b/kconfig/Makefile
@@ -8,28 +8,28 @@ obj = ./kconfig
 PHONY += clean help oldconfig menuconfig config silentoldconfig \
 	randconfig allyesconfig allnoconfig allmodconfig defconfig
 
-menuconfig: $(obj)/mconf
+menuconfig: $(obj)/mconf $(KCONFIG_TOP)
 	$< $(KCONFIG_TOP)
 
-config: $(obj)/conf
+config: $(obj)/conf $(KCONFIG_TOP)
 	$< $(KCONFIG_TOP)
 
-oldconfig: $(obj)/conf
+oldconfig: $(obj)/conf $(KCONFIG_TOP)
 	$< -o $(KCONFIG_TOP)
 
-silentoldconfig: $(obj)/conf
+silentoldconfig: $(obj)/conf $(KCONFIG_TOP)
 	$< -s $(KCONFIG_TOP)
 
-randconfig: $(obj)/conf
+randconfig: $(obj)/conf $(KCONFIG_TOP)
 	$< -r $(KCONFIG_TOP)
 
-allyesconfig: $(obj)/conf
+allyesconfig: $(obj)/conf $(KCONFIG_TOP)
 	$< -y $(KCONFIG_TOP)
 
-allnoconfig: $(obj)/conf
+allnoconfig: $(obj)/conf $(KCONFIG_TOP)
 	$< -n $(KCONFIG_TOP)
 
-defconfig: $(obj)/conf
+defconfig: $(obj)/conf $(KCONFIG_TOP)
 	$< -D /dev/null $(KCONFIG_TOP)
 
 # Help text used by make help
diff --git a/lib/bunzip.c b/lib/bunzip.c
index 7133702..f923b0c 100644
--- a/lib/bunzip.c
+++ b/lib/bunzip.c
@@ -259,7 +259,7 @@ static int read_block_header(struct bunzip_data *bd, struct bwdata *bw)
 		base = hufGroup->base-1;
 		limit = hufGroup->limit-1;
 
-		// zero temp[] and limit[], and put calculate permute[]
+		// zero temp[] and limit[], and calculate permute[]
 		pp = 0;
 		for (ii = minLen; ii <= maxLen; ii++) {
 			temp[ii] = limit[ii] = 0;
diff --git a/scripts/cfg2files.sh b/scripts/cfg2files.sh
deleted file mode 100755
index 4f24c90..0000000
--- a/scripts/cfg2files.sh
+++ /dev/null
@@ -1,11 +0,0 @@
-#!/bin/bash
-
-# cat .config into this to get a list of .c files.
-
-# Grab the XXX part of all CONFIG_XXX entries, removing everything after the
-# second underline.  Sort the list, keep only one of each entry, convert
-# to lower case, remove toybox itself from the list (as that indicates
-# global symbols).
-
-sed -nre 's/^CONFIG_(.*)=y/\1/;t skip;b;:skip;s/_.*//;p' \
-	| sort -u | tr A-Z a-z | grep -v '^toybox$'
diff --git a/scripts/genconfig.sh b/scripts/genconfig.sh
new file mode 100755
index 0000000..59c63c5
--- /dev/null
+++ b/scripts/genconfig.sh
@@ -0,0 +1,16 @@
+#!/bin/bash
+
+mkdir -p generated
+
+function genconfig()
+{
+  for i in $(echo toys/*.c | sort)
+  do
+    # Grab the config block for Config.in
+    echo "# $i"
+    sed -n '/^\*\//q;/^config [A-Z]/,$p' $i || exit 1
+    echo
+  done
+}
+
+genconfig > generated/Config.in
diff --git a/scripts/make.sh b/scripts/make.sh
new file mode 100755
index 0000000..6cdd01a
--- /dev/null
+++ b/scripts/make.sh
@@ -0,0 +1,56 @@
+#!/bin/bash
+
+# Grab default values for $CFLAGS and such.
+
+source ./configure
+
+echo "Extract configuration information from toys/*.c files."
+scripts/genconfig.sh
+
+# Only recreate generated/help.h if python is installed
+if [ ! -z "$(which python)" ] && [ ! -z "$(grep 'CONFIG_HELP=y' .config)" ]
+then
+  echo "Extract help text from Config.in."
+  scripts/config2help.py Config.in > generated/help.h || exit 1
+fi
+
+echo "Make generated/config.h from .config."
+
+# This long and roundabout sed invocation is to make old versions of sed happy.
+# New ones have '\n' so can replace one line with two without all the branches
+# and tedious mucking about with hold space.
+
+sed -n -e 's/^# CONFIG_\(.*\) is not set.*/\1/' \
+  -e 't notset' -e 'b tryisset' -e ':notset' \
+  -e 'h' -e 's/.*/#define CFG_& 0/p' \
+  -e 'g' -e 's/.*/#define USE_&(...)/p' -e 'd' -e ':tryisset' \
+  -e 's/^CONFIG_\(.*\)=y.*/\1/' -e 't isset' -e 'd' -e ':isset' \
+  -e 'h' -e 's/.*/#define CFG_& 1/p' \
+  -e 'g' -e 's/.*/#define USE_&(...) __VA_ARGS__/p' .config > \
+  generated/config.h || exit 1
+
+#for i in $(echo toys/*.c | sort)
+#do
+  # Grab the function command names
+  # NAME=$(echo $i | sed -e 's@toys/@@' -e 's@\.c@@')
+  #sed -n '/struct '$NAME'_command {/,/};/p' $i \
+  #	>> generated/globals_big.h
+  #  echo "struct ${NAME}_command;" >> generated/globals.h
+#done
+
+# Extract a list of toys/*.c files to compile from the data in ".config" with
+# sed, sort, and tr:
+
+# 1) Grab the XXX part of all CONFIG_XXX entries, removing everything after the
+# second underline
+# 2) Sort the list, keeping only one of each entry.
+# 3) Convert to lower case.
+# 4) Remove toybox itself from the list (as that indicates global symbols).
+# 5) Add "toys/" prefix and ".c" suffix.
+
+TOYFILES=$(cat .config | sed -nre 's/^CONFIG_(.*)=y/\1/;t skip;b;:skip;s/_.*//;p' | sort -u | tr A-Z a-z | grep -v '^toybox$' | sed 's@\(.*\)@toys/\1.c@' )
+
+echo "Compile toybox..."
+
+$DEBUG $CC $CFLAGS -I . -o toybox_unstripped $OPTIMIZE main.c lib/*.c $TOYFILES
+$DEBUG $STRIP toybox_unstripped -o toybox
diff --git a/toys.h b/toys.h
index c54dbd6..0eb1ee1 100644
--- a/toys.h
+++ b/toys.h
@@ -6,7 +6,7 @@
  * Licensed under GPL version 2, see file LICENSE in this tarball for details.
  */
 
-#include "generated/gen_config.h"
+#include "generated/config.h"
 
 #include "lib/portability.h"
 
diff --git a/toys/Config.in b/toys/Config.in
deleted file mode 100644
index f108323..0000000
--- a/toys/Config.in
+++ /dev/null
@@ -1,561 +0,0 @@
-menu "Toys"
-
-# Fake config symbol to attach help entry to.
-
-config TOYBOX
-	bool
-	default n
-	help
-	  usage: toybox [command] [arguments...]
-
-	  With no arguments, shows available commands.  First argument is
-	  name of a command to run, followed by any arguments to that command.
-
-config BASENAME
-	bool "basename"
-	default y
-	help
-	  usage: basename path [suffix]
-
-	  Print the part of path after the last slash, optionally minus suffix.
-
-config BZCAT
-	bool "bzcat"
-	default n
-	help
-	  usage: bzcat [filename...]
-
-	  Decompress listed files to stdout.  Use stdin if no files listed.
-
-config CATV
-	bool "catv"
-	default y
-	help
-	  usage: catv [-evt] [filename...]
-
-	  Display nonprinting characters as escape sequences.  Use M-x for
-	  high ascii characters (>127), and ^x for other nonprinting chars.
-
-	  -e	Mark each newline with $
-	  -t	Show tabs as ^I
-	  -v	Don't use ^x or M-x escapes.
-
-config CHROOT
-	bool "chroot"
-	default y
-	help
-	  usage: chroot NEWPATH [commandline...]
-
-	  Run command within a new root directory.  If no command, run /bin/sh.
-
-config CHVT
-	bool "chvt"
-	default y
-	help
-	  usage: chvt N
-
-	  Change to virtual terminal number N.  (This only works in text mode.)
-
-	  Virtual terminals are the Linux VGA text mode displays, ordinarily
-	  switched between via alt-F1, alt-F2, etc.  Use ctrl-alt-F1 to switch
-	  from X to a virtual terminal, and alt-F6 (or F7, or F8) to get back.
-
-config COUNT
-	bool "count"
-	default y
-	help
-	  usage: count
-
-	  Copy stdin to stdout, displaying simple progress indicator to stderr.
-
-config DF
-	bool "df (disk free)"
-	default y
-	help
-	  usage: df [-t type] [FILESYSTEM ...]
-
-	  The "disk free" command, df shows total/used/available disk space for
-	  each filesystem listed on the command line, or all currently mounted
-	  filesystems.
-
-	  -t type
-		Display only filesystems of this type.
-
-config DF_PEDANTIC
-	bool "options -P and -k"
-	default y
-	depends on DF
-	help
-	  usage: df [-Pk]
-
-	  -P	The SUSv3 "Pedantic" option
-
-		Provides a slightly less useful output format dictated by
-		the Single Unix Specification version 3, and sets the
-		units to 512 bytes instead of the default 1024 bytes.
-
-	  -k	Sets units back to 1024 bytes (the default without -P)
-
-config DIRNAME
-	bool "dirname"
-	default y
-	help
-	  usage: dirname path
-
-	  Print the part of path up to the last slash.
-
-config DMESG
-	bool "dmesg"
-	default y
-	help
-	  usage: dmesg [-n level] [-s bufsize] | -c
-
-	  Print or control the kernel ring buffer.
-
-	  -n	Set kernel logging level (1-9).
-	  -s	Size of buffer to read (in bytes), default 16384.
-	  -c	Clear the ring buffer after printing.
-
-config ECHO
-	bool "echo"
-	default y
-	help
-	  usage: echo [-ne] [args...]
-
-	  Write each argument to stdout, with one space between each, followed
-	  by a newline.
-
-	  -n	No trailing newline.
-	  -e	Process the following escape sequences:
-		\\	backslash
-		\a	alert (beep/flash)
-		\b	backspace
-		\c	Stop output here (avoids trailing newline)
-		\f	form feed
-		\n	newline
-		\r	carriage return
-		\t	horizontal tab
-		\v	vertical tab
-
-config FALSE
-	bool "false"
-	default y
-	help
-	  Return nonzero.
-
-config HELLO
-	bool "hello"
-	default y
-	help
-	  A hello world program.  You don't need this.
-
-config MDEV
-	bool "mdev"
-	default n
-	help
-	  usage: mdev [-s]
-
-	  Create devices in /dev using information from /sys.
-
-	  -s         Scan all entries in /sys to populate /dev.
-
-config MDEV_CONF
-	bool "Configuration file for mdev"
-	default n
-	depends on MDEV
-	help
-	  The mdev config file (/etc/mdev.conf) contains lines that look like:
-	    hd[a-z][0-9]* 0:3 660
-
-	  Each line must contain three whitespace separated fields.  The first
-	  field is a regular expression matching one or more device names, and
-	  the second and third fields are uid:gid and file permissions for
-	  matching devies.
-
-config MKE2FS
-	bool "mke2fs"
-	default n
-	help
-	  usage: mke2fs [-Fnq] [-b ###] [-N|i ###] [-m ###] device
-
-	  Create an ext2 filesystem on a block device or filesystem image.
-
-	  -F         Force to run on a mounted device
-	  -n         Don't write to device
-	  -q         Quiet (no output)
-	  -b size    Block size (1024, 2048, or 4096)
-          -N inodes  Allocate this many inodes
-	  -i bytes   Allocate one inode for every XXX bytes of device
-          -m percent Reserve this percent of filesystem space for root user
-
-config MKE2FS_JOURNAL
-	bool "Journaling support (ext3)"
-	default n
-	depends on MKE2FS
-	help
-	  usage: [-j] [-J size=###,device=XXX]
-
-	  -j         Create journal (ext3)
-	  -J         Journal options
-	             size: Number of blocks (1024-102400)
-	             device: Specify an external journal
-
-config MKE2FS_GEN
-	bool "Generate (gene2fs)"
-	default n
-	depends on MKE2FS
-	help
-	  usage: gene2fs [options] device filename
-
-	  The [options] are the same as mke2fs.
-
-config MKE2FS_LABEL
-	bool "Label support"
-	default n
-	depends on MKE2FS
-	help
-	  usage: mke2fs [-L label] [-M path] [-o string]
-
-	  -L         Volume label
-	  -M         Path to mount point
-          -o         Created by
-
-config MKE2FS_EXTENDED
-	bool "Extended options"
-	default n
-	depends on MKE2FS
-	help
-	  usage: mke2fs [-E stride=###] [-O option[,option]]
-
-	  -E stride= Set RAID stripe size (in blocks)
-	  -O [opts]  Specify fewer ext2 option flags (for old kernels)
-	             All of these are on by default (as appropriate)
-	     none         Clear default options (all but journaling)
-	     dir_index    Use htree indexes for large directories
-	     filetype     Store file type info in directory entry
-	     has_journal  Set by -j
-	     journal_dev  Set by -J device=XXX
-	     sparse_super Don't allocate huge numbers of redundant superblocks
-
-config MKFIFO
-	bool "mkfifo"
-	default y
-	help
-	  usage: mkfifo [-m mode] name...
-
-	  Makes a named pipe at name.
-
-	  -m mode	The mode of the pipe(s) created by mkfifo. It defaults to 0644.
-			The format is in octal, optionally preceded by a leading zero.
-
-config NETCAT
-	bool "netcat"
-	default y
-	help
-	  usage: netcat [-iwlp] {IPADDR PORTNUM|-f FILENAME} [-e COMMAND]
-
-	  -e exec the rest of the command line
-	  -i SECONDS delay after each line sent
-	  -w SECONDS timeout for connection
-	  -f filename use file (ala /dev/ttyS0) instead of network
-	  -l listen for incoming connection (twice for persistent connection)
-	  -p local port number
-	  -s local source address
-	  -q SECONDS quit this many seconds after EOF on stdin.
-
-	  Use -l twice with -e for a quick-and-dirty server.
-
-	  Use "stty 115200 -F /dev/ttyS0 && stty raw -echo -ctlecho" with
-	  netcat -f to connect to a serial port.
-
-config ONEIT
-	bool "oneit"
-	default y
-	help
-	  usage: oneit [-p] [-c /dev/tty0] command [...]
-
-	  A simple init program that runs a single supplied command line with a
-	  controlling tty (so CTRL-C can kill it).
-
-	  -p	Power off instead of rebooting when command exits.
-	  -c	Which console device to use.
-
-	  The oneit command runs the supplied command line as a child process
-	  (because PID 1 has signals blocked), attached to /dev/tty0, in its
-	  own session.  Then oneit reaps zombies until the child exits, at
-	  which point it reboots (or with -p, powers off) the system.
-
-config PATCH
-	bool "patch"
-	default y
-	help
-	  usage: patch [-i file] [-p depth] [-Ru]
-
-	  Apply a unified diff to one or more files.
-
-	  -i	Input file (defaults=stdin)
-	  -p	number of '/' to strip from start of file paths (default=all)
-	  -R	Reverse patch.
-	  -u	Ignored (only handles "unified" diffs)
-
-	  This version of patch only handles unified diffs, and only modifies
-	  a file when all all hunks to that file apply.  Patch prints failed
-	  hunks to stderr, and exits with nonzero status if any hunks fail.
-
-	  A file compared against /dev/null is created/deleted as appropriate.
-
-config PWD
-	bool "pwd"
-	default y
-	help
-	  usage: pwd
-
-	  The print working directory command prints the current directory.
-
-config READLINK
-	bool "readlink"
-	default n
-	help
-	  usage: readlink
-
-	  Show what a symbolic link points to.
-
-config READLINK_F
-	bool "readlink -f"
-	default n
-	depends on READLINK
-	help
-	  usage: readlink [-f]
-
-	  -f	Show full cannonical path, with no symlinks in it.  Returns
-		nonzero if nothing could currently exist at this location.
-
-config SED
-	bool "sed"
-	default n
-	help
-	  usage: sed [-irn] {command | [-e command]...} [FILE...]
-
-	  Stream EDitor, transforms text by appling commands to each line
-	  of input.
-
-config SHA1SUM
-	bool "sha1sum"
-	default y
-	help
-	  usage: sha1sum [file...]
-
-	  Calculate sha1 hash of files (or stdin).
-
-config SLEEP
-	bool "sleep"
-	default y
-	help
-	  usage: sleep SECONDS
-
-	  Wait a decimal integer number of seconds.
-
-config SYNC
-	bool "sync"
-	default y
-	help
-	  usage: sync
-
-	  Write pending cached data to disk (synchronize), blocking until done.
-
-config TOUCH
-	bool "touch"
-	default y
-	help
-	  usage: touch [-acm] [-r FILE] [-t MMDDhhmm] [-l bytes] FILE...
-
-	  Change file timestamps, ensure file existance and change file length.
-
-	  -a	Only change the access time.
-	  -c	Do not create the file if it doesn't exist.
-	  -l	Length to truncate (or sparsely extend) file to.
-	  -m	Only change the modification time.
-	  -r	Reference file to take timestamps from.
-	  -t	Time to change {a,m}time to.
-
-config TOYSH
-	bool "sh (toysh)"
-	default y
-	help
-	  usage: sh [-c command] [script]
-
-	  The toybox command shell.  Runs a shell script, or else reads input
-	  interactively and responds to it.
-
-	  -c	command line to execute
-
-config TOYSH_TTY
-	bool "Interactive shell (terminal control)"
-	default n
-	depends on TOYSH
-	help
-	  Add terminal control to toysh.  This is necessary for interactive use,
-	  so the shell isn't killed by CTRL-C.
-
-config TOYSH_PROFILE
-	bool "Profile support"
-	default n
-	depends on TOYSH_TTY
-	help
-	  Read /etc/profile and ~/.profile when running interactively.
-
-	  Also enables the built-in command "source".
-
-config TOYSH_JOBCTL
-	bool "Job Control (fg, bg, jobs)"
-	default n
-	depends on TOYSH_TTY
-	help
-	  Add job control to toysh.  This lets toysh handle CTRL-Z, and enables
-	  the built-in commands "fg", "bg", and "jobs".
-
-	  With pipe support, enable use of "&" to run background processes.
-
-config TOYSH_FLOWCTL
-	bool "Flow control (if, while, for, functions)"
-	default n
-	depends on TOYSH
-	help
-	  Add flow control to toysh.  This enables the if/then/else/fi,
-	  while/do/done, and for/do/done constructs.
-
-	  With pipe support, this enables the ability to define functions
-	  using the "function name" or "name()" syntax, plus curly brackets
-	  "{ }" to group commands.
-
-config TOYSH_QUOTES
-	bool "Smarter argument parsing (quotes)"
-	default n
-	depends on TOYSH
-	help
-	  Add support for parsing "" and '' style quotes to the toysh command
-	  parser, with lets arguments have spaces in them.
-
-
-config TOYSH_WILDCARDS
-	bool "Wildcards ( ?*{,} )"
-	default n
-	depends on TOYSH_QUOTES
-	help
-	  Expand wildcards in argument names, ala "ls -l *.t?z" and
-	  "rm subdir/{one,two,three}.txt".
-
-config TOYSH_PROCARGS
-	bool "Executable arguments ( `` and $() )"
-	default n
-	depends on TOYSH_QUOTES
-	help
-	  Add support for executing arguments contianing $() and ``, using
-	  the output of the command as the new argument value(s).
-
-	  (Bash calls this "command substitution".)
-
-config TOYSH_ENVVARS
-	bool "Environment variable support"
-	default n
-	depends on TOYSH_QUOTES
-	help
-	  Substitute environment variable values for $VARNAME or ${VARNAME},
-	  and enable the built-in command "export".
-
-config TOYSH_LOCALS
-	bool "Local variables"
-	default n
-	depends on TOYSH_ENVVARS
-	help
-	  Support for local variables, fancy prompts ($PS1), the "set" command,
-	  and $?.
-
-config TOYSH_ARRAYS
-	bool "Array variables"
-	default n
-	depends on TOYSH_LOCALS
-	help
-	  Support for ${blah[blah]} style array variables.
-
-config TOYSH_PIPES
-	bool "Pipes and redirects ( | > >> < << & && | || () ; )"
-	default n
-	depends on TOYSH
-	help
-	  Support multiple commands on the same command line.  This includes
-	  | pipes, > >> < redirects, << here documents, || && conditional
-	  execution, () subshells, ; sequential execution, and (with job
-	  control) & background processes.
-
-config TOYSH_BUILTINS
-	bool "Builtin commands"
-	default n
-	depends on TOYSH
-	help
-	  Adds the commands exec, fg, bg, help, jobs, pwd, export, source, set,
-	  unset, read, alias.
-
-config EXIT
-	bool
-	default n
-	depends on TOYSH
-	help
-	  usage: exit [status]
-
-	  Exit shell.  If no return value supplied on command line, use value
-	  of most recent command, or 0 if none.
-
-config CD
-	bool
-	default n
-	depends on TOYSH
-	help
-	  usage: cd [path]
-
-	  Change current directory.  With no arguments, go to $HOME.
-
-config CD_P
-	bool # "-P support for cd"
-	default n
-	depends on TOYSH
-	help
-	  usage: cd [-PL]
-
-	  -P	Physical path: resolve symlinks in path.
-	  -L	Cancel previous -P and restore default behavior.
-
-config TRUE
-	bool "true"
-	default y
-	help
-	  Return zero.
-
-config TTY
-	bool "tty"
-	default y
-	help
-	  Print the filename of the terminal connected to standard input.
-
-	  -s	Don't print anything, only return an exit status.
-
-config WHICH
-	bool "which"
-	default y
-	help
-	  usage: which [-a] filename ...
-
-	  Search $PATH for executable files matching filename(s).
-
-	  -a	Show all matches
-
-config YES
-	bool "yes"
-	default y
-	help
-	  usage: yes [args...]
-
-	  Repeatedly output line until killed.  If no args, output 'y'.
-
-endmenu
-
diff --git a/toys/basename.c b/toys/basename.c
index ee5345e..ffcb5bb 100644
--- a/toys/basename.c
+++ b/toys/basename.c
@@ -1,8 +1,19 @@
-/* vi: set sw=4 ts=4: */
-/* basename.c - print non-directory portion of path
+/* vi: set sw=4 ts=4:
+ *
+ * basename.c - print non-directory portion of path
+ *
+ * Copyright 2007 Charlie Shepherd <masterdriverz@gentoo.org>
  *
  * See http://www.opengroup.org/onlinepubs/009695399/utilities/basename.html
- */
+
+config BASENAME
+	bool "basename"
+	default y
+	help
+	  usage: basename path [suffix]
+
+	  Print the part of path after the last slash, optionally minus suffix.
+*/
 
 #include "toys.h"
 
diff --git a/toys/bzcat.c b/toys/bzcat.c
index 984e418..39b962e 100644
--- a/toys/bzcat.c
+++ b/toys/bzcat.c
@@ -1,7 +1,19 @@
-/* vi: set sw=4 ts=4: */
-/*
+/* vi: set sw=4 ts=4:
+ *
  * bzcat.c - decompress stdin to stdout using bunzip2.
- */
+ *
+ * Copyright 2007 Rob Landley <rob@landley.net>
+ *
+ * Not in SUSv3.
+
+config BZCAT
+	bool "bzcat"
+	default n
+	help
+	  usage: bzcat [filename...]
+
+	  Decompress listed files to stdout.  Use stdin if no files listed.
+*/
 
 #include "toys.h"
 
diff --git a/toys/catv.c b/toys/catv.c
index 806b029..aa1bfd5 100644
--- a/toys/catv.c
+++ b/toys/catv.c
@@ -1,12 +1,25 @@
-/* vi: set sw=4 ts=4: */
-/*
+/* vi: set sw=4 ts=4:
+ *
  * cat -v implementation for toybox
  *
  * Copyright (C) 2006, 2007 Rob Landley <rob@landley.net>
- */
+ *
+ * Not in SUSv3, but see "Cat -v considered harmful" at
+ *   http://cm.bell-labs.com/cm/cs/doc/84/kp.ps.gz
+
+config CATV
+	bool "catv"
+	default y
+	help
+	  usage: catv [-evt] [filename...]
+
+	  Display nonprinting characters as escape sequences.  Use M-x for
+	  high ascii characters (>127), and ^x for other nonprinting chars.
 
-/* See "Cat -v considered harmful" at
- * http://cm.bell-labs.com/cm/cs/doc/84/kp.ps.gz */
+	  -e	Mark each newline with $
+	  -t	Show tabs as ^I
+	  -v	Don't use ^x or M-x escapes.
+*/
 
 #include "toys.h"
 
diff --git a/toys/chroot.c b/toys/chroot.c
index 8d2e9aa..305d4fb 100644
--- a/toys/chroot.c
+++ b/toys/chroot.c
@@ -1,9 +1,19 @@
-/* vi: set sw=4 ts=4: */
-/*
+/* vi: set sw=4 ts=4:
+ *
  * chroot.c - Run command in new root directory.
  *
+ * Copyright 2007 Rob Landley <rob@landley.net>
+ *
  * Not in SUSv3.
- */
+
+config CHROOT
+	bool "chroot"
+	default y
+	help
+	  usage: chroot NEWPATH [commandline...]
+
+	  Run command within a new root directory.  If no command, run /bin/sh.
+*/
 
 #include "toys.h"
 
diff --git a/toys/chvt.c b/toys/chvt.c
index 4604068..fbee391 100644
--- a/toys/chvt.c
+++ b/toys/chvt.c
@@ -1,10 +1,23 @@
-/* vi: set sw=4 ts=4: */
-/*
+/* vi: set sw=4 ts=4:
+ *
  * chvt.c switch virtual terminals
  * 
  * Copyright (C) 2008 David Anders <danders@amltd.com>
  *
- */
+ * Not in SUSv3.
+
+config CHVT
+	bool "chvt"
+	default y
+	help
+	  usage: chvt N
+
+	  Change to virtual terminal number N.  (This only works in text mode.)
+
+	  Virtual terminals are the Linux VGA text mode displays, ordinarily
+	  switched between via alt-F1, alt-F2, etc.  Use ctrl-alt-F1 to switch
+	  from X to a virtual terminal, and alt-F6 (or F7, or F8) to get back.
+*/
 
 #include "toys.h"
 
diff --git a/toys/count.c b/toys/count.c
index 89f97d0..b4e2433 100644
--- a/toys/count.c
+++ b/toys/count.c
@@ -1,9 +1,19 @@
-/* vi: set sw=4 ts=4: */
-/*
+/* vi: set sw=4 ts=4:
+ *
  * count.c - Progress indicator from stdin to stdout
  *
+ * Copyright 2002 Rob Landley <rob@landley.net>
+ *
  * Not in SUSv3.
- */
+
+config COUNT
+	bool "count"
+	default y
+	help
+	  usage: count
+
+	  Copy stdin to stdout, displaying simple progress indicator to stderr.
+*/
 
 #include "toys.h"
 
diff --git a/toys/df.c b/toys/df.c
index 52863cc..da0d94b 100644
--- a/toys/df.c
+++ b/toys/df.c
@@ -1,12 +1,39 @@
-/* vi: set sw=4 ts=4: */
-/*
+/* vi: set sw=4 ts=4:
+ *
  * df.c - report free disk space.
  *
- * Implemented roughly according to SUSv3:
- * http://www.opengroup.org/onlinepubs/009695399/utilities/df.html
+ * Copyright 2006 Rob Landley <rob@landley.net>
  *
- * usage: df [-k] [-P|-t] [file...]
- */
+ * See http://www.opengroup.org/onlinepubs/009695399/utilities/df.html
+
+config DF
+	bool "df (disk free)"
+	default y
+	help
+	  usage: df [-t type] [FILESYSTEM ...]
+
+	  The "disk free" command, df shows total/used/available disk space for
+	  each filesystem listed on the command line, or all currently mounted
+	  filesystems.
+
+	  -t type
+		Display only filesystems of this type.
+
+config DF_PEDANTIC
+	bool "options -P and -k"
+	default y
+	depends on DF
+	help
+	  usage: df [-Pk]
+
+	  -P	The SUSv3 "Pedantic" option
+
+		Provides a slightly less useful output format dictated by
+		the Single Unix Specification version 3, and sets the
+		units to 512 bytes instead of the default 1024 bytes.
+
+	  -k	Sets units back to 1024 bytes (the default without -P)
+*/
 
 #include "toys.h"
 
diff --git a/toys/dirname.c b/toys/dirname.c
index 8810bec..9d1ad43 100644
--- a/toys/dirname.c
+++ b/toys/dirname.c
@@ -1,8 +1,19 @@
-/* vi: set sw=4 ts=4: */
-/* dirname.c - print directory portion of path, or "." if none.
+/* vi: set sw=4 ts=4:
+ *
+ * dirname.c - print directory portion of path, or "." if none.
+ *
+ * Copyright 2007 Charlie Shephard <masterdriverz@gentoo.org>
  *
  * See http://www.opengroup.org/onlinepubs/009695399/utilities/dirname.html
- */
+
+config DIRNAME
+	bool "dirname"
+	default y
+	help
+	  usage: dirname path
+
+	  Print the part of path up to the last slash.
+*/
 
 #include "toys.h"
 #include <libgen.h>
diff --git a/toys/dmesg.c b/toys/dmesg.c
index 82fa0c3..a16b8d0 100644
--- a/toys/dmesg.c
+++ b/toys/dmesg.c
@@ -1,11 +1,23 @@
-/* vi: set sw=4 ts=4: */
-/*
+/* vi: set sw=4 ts=4:
+ *
  * dmesg.c - display/control kernel ring buffer.
  *
  * Copyright 2006, 2007 Rob Landley <rob@landley.net>
  *
  * Not in SUSv3.
- */
+
+config DMESG
+	bool "dmesg"
+	default y
+	help
+	  usage: dmesg [-n level] [-s bufsize] | -c
+
+	  Print or control the kernel ring buffer.
+
+	  -n	Set kernel logging level (1-9).
+	  -s	Size of buffer to read (in bytes), default 16384.
+	  -c	Clear the ring buffer after printing.
+*/
 
 #include "toys.h"
 #include <sys/klog.h>
diff --git a/toys/echo.c b/toys/echo.c
index a7e6067..7c475ca 100644
--- a/toys/echo.c
+++ b/toys/echo.c
@@ -1,9 +1,32 @@
-/* vi: set sw=4 ts=4: */
-/*
+/* vi: set sw=4 ts=4:
+ *
  * echo.c - echo supporting -n and -e.
  *
+ * Copyright 2007 Rob Landley <rob@landley.net>
+ *
  * See http://www.opengroup.org/onlinepubs/009695399/utilities/echo.html
- */
+
+config ECHO
+	bool "echo"
+	default y
+	help
+	  usage: echo [-ne] [args...]
+
+	  Write each argument to stdout, with one space between each, followed
+	  by a newline.
+
+	  -n	No trailing newline.
+          -e	Process the following escape sequences:
+		\\	backslash
+		\a	alert (beep/flash)
+		\b	backspace
+		\c	Stop output here (avoids trailing newline)
+		\f	form feed
+		\n	newline
+		\r	carriage return
+		\t	horizontal tab
+		\v	vertical tab
+*/
 
 #include "toys.h"
 
diff --git a/toys/false.c b/toys/false.c
index d4345a6..ac6bf64 100644
--- a/toys/false.c
+++ b/toys/false.c
@@ -1,9 +1,18 @@
-/* vi: set sw=4 ts=4: */
-/*
+/* vi: set sw=4 ts=4:
+ *
  * false.c - Return nonzero.
  *
+ * Copyright 2007 Rob Landley <rob@landley.net>
+ *
  * See http://www.opengroup.org/onlinepubs/009695399/utilities/false.html
- */
+
+
+config FALSE
+	bool "false"
+	default y
+	help
+	  Return nonzero.
+*/
 
 #include "toys.h"
 
diff --git a/toys/hello.c b/toys/hello.c
index 12dd7ac..278fa0a 100644
--- a/toys/hello.c
+++ b/toys/hello.c
@@ -1,9 +1,21 @@
-/* vi: set sw=4 ts=4: */
-/*
+/* vi: set sw=4 ts=4:
+ *
  * hello.c - A hello world program.
  *
+ * Copyright 2006 Rob Landley <rob@landley.net>
+ *
  * Not in SUSv3.
- */
+ * See http://www.opengroup.org/onlinepubs/009695399/utilities/
+
+config HELLO
+	bool "hello"
+	default y
+	help
+	  A hello world program.  You don't need this.
+
+	  Mostly used as an example/skeleton file for adding new commands,
+	  occasionally nice to test kernel booting via "init=/bin/hello".
+*/
 
 #include "toys.h"
 
diff --git a/toys/help.c b/toys/help.c
index 42d06a8..472ccde 100644
--- a/toys/help.c
+++ b/toys/help.c
@@ -1,9 +1,27 @@
-/* vi: set sw=4 ts=4: */
-/*
+/* vi: set sw=4 ts=4:
+ *
  * help.c - Show help for toybox
  *
+ * Copyright 2007 Rob Landley <rob@landley.net>
+ *
  * Not in SUSv3, but exists as a bash builtin.
- */
+
+config HELP
+	bool "help"
+	default y
+	help
+	  usage: help [command]
+
+	  Show usage information for toybox commands.
+
+config HELP_LONG
+	bool "Verbose help text"
+	default y
+	depends on HELP
+	help
+	  Show more than one line of help information per command.
+*/
+ 
 
 #include "toys.h"
 #include "generated/help.h"
diff --git a/toys/mdev.c b/toys/mdev.c
index bc34c0d..385e52d 100644
--- a/toys/mdev.c
+++ b/toys/mdev.c
@@ -6,7 +6,30 @@
  * Copyright 2005 Frank Sorenson <frank@tuxrocks.com>
  *
  * Not in SUSv3.
- */
+
+config MDEV
+	bool "mdev"
+	default n
+	help
+	  usage: mdev [-s]
+
+	  Create devices in /dev using information from /sys.
+
+	  -s	Scan all entries in /sys to populate /dev.
+
+config MDEV_CONF
+	bool "Configuration file for mdev"
+	default n
+	depends on MDEV
+	help
+	  The mdev config file (/etc/mdev.conf) contains lines that look like:
+		hd[a-z][0-9]* 0:3 660
+
+	  Each line must contain three whitespace separated fields.  The first
+	  field is a regular expression matching one or more device names, and
+	  the second and third fields are uid:gid and file permissions for
+	  matching devies.
+*/
 
 #include "toys.h"
 #include "lib/xregcomp.h"
diff --git a/toys/mke2fs.c b/toys/mke2fs.c
index 32dc214..405ed94 100644
--- a/toys/mke2fs.c
+++ b/toys/mke2fs.c
@@ -5,7 +5,72 @@
  * Copyright 2006, 2007 Rob Landley <rob@landley.net>
  *
  * Not in SUSv3.
- */
+
+config MKE2FS
+	bool "mke2fs"
+	default n
+	help
+	  usage: mke2fs [-Fnq] [-b ###] [-N|i ###] [-m ###] device
+
+	  Create an ext2 filesystem on a block device or filesystem image.
+
+	  -F         Force to run on a mounted device
+	  -n         Don't write to device
+	  -q         Quiet (no output)
+	  -b size    Block size (1024, 2048, or 4096)
+	  -N inodes  Allocate this many inodes
+	  -i bytes   Allocate one inode for every XXX bytes of device
+	  -m percent Reserve this percent of filesystem space for root user
+
+config MKE2FS_JOURNAL
+	bool "Journaling support (ext3)"
+	default n
+	depends on MKE2FS
+	help
+	  usage: [-j] [-J size=###,device=XXX]
+
+	  -j         Create journal (ext3)
+	  -J         Journal options
+	             size: Number of blocks (1024-102400)
+	             device: Specify an external journal
+
+config MKE2FS_GEN
+	bool "Generate (gene2fs)"
+	default n
+	depends on MKE2FS
+	help
+	  usage: gene2fs [options] device filename
+
+	  The [options] are the same as mke2fs.
+
+config MKE2FS_LABEL
+	bool "Label support"
+	default n
+	depends on MKE2FS
+	help
+	  usage: mke2fs [-L label] [-M path] [-o string]
+
+	  -L         Volume label
+	  -M         Path to mount point
+	  -o         Created by
+
+config MKE2FS_EXTENDED
+	bool "Extended options"
+	default n
+	depends on MKE2FS
+	help
+	  usage: mke2fs [-E stride=###] [-O option[,option]]
+
+	  -E stride= Set RAID stripe size (in blocks)
+	  -O [opts]  Specify fewer ext2 option flags (for old kernels)
+	             All of these are on by default (as appropriate)
+	     none         Clear default options (all but journaling)
+	     dir_index    Use htree indexes for large directories
+	     filetype     Store file type info in directory entry
+	     has_journal  Set by -j
+	     journal_dev  Set by -J device=XXX
+	     sparse_super Don't allocate huge numbers of redundant superblocks
+*/
 
 #include "toys.h"
 
@@ -564,25 +629,3 @@ void mke2fs_main(void)
 		put_zeroes((end-start) * TT.blocksize);
 	}
 }
-
-// Scratch pad:
-	// b - block size (1024, 2048, 4096)
-	// F - force (run on mounted device or non-block device)
-	// i - bytes per inode 
-	// N - number of inodes
-	// m - reserved blocks percentage
-	// n - Don't write
-	// q - quiet
-
-	// L - volume label
-	// M - last mounted path
-	// o - creator os
-	
-	// j - create journal
-	// J - journal options (size=1024-102400 blocks,device=)
-	//        device=/dev/blah or LABEL=label UUID=uuid
-
-	// E - extended options (stride=stripe-size blocks)
-	// O - none,dir_index,filetype,has_journal,journal_dev,sparse_super
-
-
diff --git a/toys/mkfifo.c b/toys/mkfifo.c
index a959a48..77cb73e 100644
--- a/toys/mkfifo.c
+++ b/toys/mkfifo.c
@@ -1,9 +1,21 @@
-/* vi: set sw=4 ts=4: */
-/*
+/* vi: set sw=4 ts=4:
+ *
  * mkfifo.c: Create a named pipe.
  *
  * See http://www.opengroup.org/onlinepubs/009695399/utilities/mkfifo.html
- */
+
+config MKFIFO
+	bool "mkfifo"
+	default y
+	help
+	  usage: mkfifo [-m mode] name...
+
+	  Makes a named pipe at name.
+
+	  -m mode	The mode of the pipe(s) created by mkfifo. It defaults
+			to 0644.  This number is in octal, optionally preceded
+			by a leading zero.
+*/
 
 #include "toys.h"
 
diff --git a/toys/netcat.c b/toys/netcat.c
index a6d9364..573a76c 100644
--- a/toys/netcat.c
+++ b/toys/netcat.c
@@ -1,18 +1,35 @@
-/* vi: set sw=4 ts=4: */
-/* nc: mini-netcat - Forward stdin/stdout to a file or network connection.
+/* vi: set sw=4 ts=4:
+ *
+ * nc: mini-netcat - Forward stdin/stdout to a file or network connection.
  *
  * Copyright 2007 Rob Landley <rob@landley.net>
  *
  * Not in SUSv3.
- */
+
+config NETCAT
+	bool "netcat"
+	default n
+	help
+	  usage: netcat [-iwlp] {IPADDR PORTNUM|-f FILENAME} [-e COMMAND]
+
+	  -e	exec the rest of the command line
+	  -i	SECONDS delay after each line sent
+	  -w	SECONDS timeout for connection
+	  -f	filename use file (ala /dev/ttyS0) instead of network
+	  -l	listen for incoming connection (twice for persistent connection)
+	  -p	local port number
+	  -s	local source address
+	  -q	SECONDS quit this many seconds after EOF on stdin.
+
+	  Use -l twice with -e for a quick-and-dirty server.
+
+	  Use "stty 115200 -F /dev/ttyS0 && stty raw -echo -ctlecho" with
+	  netcat -f to connect to a serial port.
+*/
 
 #include "toys.h"
 #include "toynet.h"
 
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-
 #define TT toy.netcat
 
 static void timeout(int signum)
diff --git a/toys/oneit.c b/toys/oneit.c
index 8563ecb..a05e926 100644
--- a/toys/oneit.c
+++ b/toys/oneit.c
@@ -1,9 +1,28 @@
-/* oneit.c, tiny one-process init replacement.
+/* vi: set sw=4 ts=4:
+ *
+ * oneit.c, tiny one-process init replacement.
  *
  * Copyright 2005, 2007 by Rob Landley <rob@landley.net>.
  *
  * Not in SUSv3.
- */
+
+config ONEIT
+	bool "oneit"
+	default y
+	help
+	  usage: oneit [-p] [-c /dev/tty0] command [...]
+
+	  A simple init program that runs a single supplied command line with a
+	  controlling tty (so CTRL-C can kill it).
+
+	  -p	Power off instead of rebooting when command exits.
+	  -c	Which console device to use.
+
+	  The oneit command runs the supplied command line as a child process
+	  (because PID 1 has signals blocked), attached to /dev/tty0, in its
+	  own session.  Then oneit reaps zombies until the child exits, at
+	  which point it reboots (or with -p, powers off) the system.
+*/
 
 #include "toys.h"
 #include <sys/reboot.h>
diff --git a/toys/patch.c b/toys/patch.c
index 2f1db0e..53be263 100644
--- a/toys/patch.c
+++ b/toys/patch.c
@@ -1,13 +1,11 @@
-/* vi: set sw=4 ts=4: */
-/*
+/* vi: set sw=4 ts=4:
+ *
  * patch.c - Apply a "universal" diff.
  *
- * SUSv3 at http://www.opengroup.org/onlinepubs/009695399/utilities/patch.html
- * but who cares about "ed"?
+ * Copyright 2007 Rob Landley <rob@landley.net>
  *
- * -u ignored
- * -R reverse (remove applied hunks, apply removed hunks)
- * -p num remove this many slashes from start of path (default = all)
+ * see http://www.opengroup.org/onlinepubs/009695399/utilities/patch.html
+ * (But only does -u, because who still cares about "ed"?)
  *
  * TODO:
  * -b backup
@@ -15,7 +13,6 @@
  * -N ignore already applied
  * -d chdir first
  * -D define wrap #ifdef and #ifndef around changes
- * -i patchfile apply patch from filename rather than stdin
  * -o outfile output here instead of in place
  * -r rejectfile write rejected hunks to this file
  *
@@ -23,7 +20,26 @@
  * -f force (no questions asked)
  * -F fuzz (number, default 2)
  * [file] which file to patch
- */
+
+config PATCH
+	bool "patch"
+	default y
+	help
+	  usage: patch [-i file] [-p depth] [-Ru]
+
+	  Apply a unified diff to one or more files.
+
+	  -i	Input file (defaults=stdin)
+	  -p	number of '/' to strip from start of file paths (default=all)
+	  -R	Reverse patch.
+	  -u	Ignored (only handles "unified" diffs)
+
+	  This version of patch only handles unified diffs, and only modifies
+	  a file when all all hunks to that file apply.  Patch prints failed
+	  hunks to stderr, and exits with nonzero status if any hunks fail.
+
+	  A file compared against /dev/null is created/deleted as appropriate.
+*/
 
 #include "toys.h"
 
diff --git a/toys/pwd.c b/toys/pwd.c
index f5f04e8..d0c4dfa 100644
--- a/toys/pwd.c
+++ b/toys/pwd.c
@@ -1,7 +1,21 @@
-/* vi: set sw=4 ts=4: */
-/*
+/* vi: set sw=4 ts=4:
+ *
  * pwd.c - Print working directory.
- */
+ *
+ * Copyright 2006 Rob Landley <rob@landley.net>
+ *
+ * See http://www.opengroup.org/onlinepubs/009695399/utilities/echo.html
+ *
+ * TODO: add -L -P
+
+config PWD
+	bool "pwd"
+	default y
+	help
+	  usage: pwd
+
+	  The print working directory command prints the current directory.
+*/
 
 #include "toys.h"
 
diff --git a/toys/readlink.c b/toys/readlink.c
index 79fdea5..89aff10 100644
--- a/toys/readlink.c
+++ b/toys/readlink.c
@@ -1,9 +1,29 @@
-/* vi: set sw=4 ts=4: */
-/*
+/* vi: set sw=4 ts=4:
+ *
  * readlink.c - Return string representation of a symbolic link.
  *
+ * Copyright 2007 Rob Landley <rob@landley.net>
+ *
  * Not in SUSv3.
- */
+
+config READLINK
+	bool "readlink"
+	default n
+	help
+	  usage: readlink
+
+	  Show what a symbolic link points to.
+
+config READLINK_F
+	bool "readlink -f"
+	default n
+	depends on READLINK
+	help
+	  usage: readlink [-f]
+
+	  -f	Show full cannonical path, with no symlinks in it.  Returns
+		nonzero if nothing could currently exist at this location.
+*/
 
 #include "toys.h"
 
diff --git a/toys/sed.c b/toys/sed.c
index 3975339..ffd0a2a 100644
--- a/toys/sed.c
+++ b/toys/sed.c
@@ -1,15 +1,24 @@
-/* vi: set sw=4 ts=4: */
-/*
+/* vi: set sw=4 ts=4:
+ *
  * sed.c - Stream editor.
  *
+ * Copyright 2008 Rob Landley <rob@landley.net>
+ *
  * See http://www.opengroup.org/onlinepubs/009695399/utilities/sed.c
- */
+
+config SED
+	bool "sed"
+	default n
+	help
+	  usage: sed [-irn] {command | [-e command]...} [FILE...]
+
+	  Stream EDitor, transforms text by appling commands to each line
+	  of input.
+*/
 
 #include "toys.h"
 #include "lib/xregcomp.h"
 
-#define TT toy.sed
-
 struct sed_command {
 	// Doubly linked list of commands.
 	struct sed_command *next, *prev;
@@ -35,6 +44,8 @@ struct sed_command {
 	char command;
 };
 
+#define TT toy.sed
+
 void sed_main(void)
 {
 	struct arg_list *test;
diff --git a/toys/sha1sum.c b/toys/sha1sum.c
index 1d405f3..2a1b11e 100644
--- a/toys/sha1sum.c
+++ b/toys/sha1sum.c
@@ -1,11 +1,22 @@
-/*
+/* vi: set sw=4 ts=4:
+ *
+ * sha1sum.c - Calculate sha1 cryptographic hash for input.
+ *
  * Copyright 2007 Rob Landley <rob@landley.net>
  *
  * Based on the public domain SHA-1 in C by Steve Reid <steve@edmweb.com>
  * from http://www.mirrors.wiretapped.net/security/cryptography/hashes/sha1/
  *
  * Not in SUSv3.
- */
+
+config SHA1SUM
+	bool "sha1sum"
+	default y
+	help
+	  usage: sha1sum [file...]
+
+	  Calculate sha1 hash of files (or stdin).
+*/
 
 #include <toys.h>
 
diff --git a/toys/sleep.c b/toys/sleep.c
index 0c01a6e..205adf2 100644
--- a/toys/sleep.c
+++ b/toys/sleep.c
@@ -1,9 +1,19 @@
-/* vi: set sw=4 ts=4: */
-/*
+/* vi: set sw=4 ts=4:
+ *
  * sleep.c - Wait for a number of seconds.
  *
+ * Copyright 2007 Rob Landley <rob@landley.net>
+ *
  * See http://www.opengroup.org/onlinepubs/009695399/utilities/sleep.html
- */
+
+config SLEEP
+	bool "sleep"
+	default y
+	help
+	  usage: sleep SECONDS
+
+	  Wait a decimal integer number of seconds.
+*/
 
 #include "toys.h"
 
diff --git a/toys/sync.c b/toys/sync.c
index 4eed0f5..96c3677 100644
--- a/toys/sync.c
+++ b/toys/sync.c
@@ -1,9 +1,19 @@
-/* vi: set sw=4 ts=4: */
-/*
+/* vi: set sw=4 ts=4:
+ *
  * sync.c - Write all pending data to disk.
  *
+ * Copyright 2007 Rob Landley <rob@landley.net>
+ *
  * Not in SUSv3.
- */
+
+config SYNC
+	bool "sync"
+	default y
+	help
+	  usage: sync
+
+	  Write pending cached data to disk (synchronize), blocking until done.
+*/
 
 #include "toys.h"
 
diff --git a/toys/touch.c b/toys/touch.c
index e01d157..8c9b7aa 100644
--- a/toys/touch.c
+++ b/toys/touch.c
@@ -1,11 +1,26 @@
-/* vi: set sw=4 ts=4: */
-/*
+/* vi: set sw=4 ts=4:
+ *
  * touch.c - Modify a file's timestamps.
  *
  * Copyright (C) 2007 Charlie Shepherd <masterdriverz@gentoo.org>
  *
  * See http://www.opengroup.org/onlinepubs/009695399/utilities/touch.html
- */
+
+config TOUCH
+	bool "touch"
+	default y
+	help
+	  usage: touch [-acm] [-r FILE] [-t MMDDhhmm] [-l bytes] FILE...
+
+	  Change file timestamps, ensure file existance and change file length.
+
+	  -a	Only change the access time.
+	  -c	Do not create the file if it doesn't exist.
+	  -l	Length to truncate (or sparsely extend) file to.
+	  -m	Only change the modification time.
+	  -r	Reference file to take timestamps from.
+	  -t	Time to change {a,m}time to.
+*/
 
 #include "toys.h"
 
diff --git a/toys/toysh.c b/toys/toysh.c
index 61df13d..353d215 100644
--- a/toys/toysh.c
+++ b/toys/toysh.c
@@ -13,9 +13,155 @@
  * http://www.opengroup.org/onlinepubs/009695399/utilities/exit.html
  *
  * Things like the bash man page are good to read too.
- */
-
-// Handle embedded NUL bytes in the command line.
+ *
+ * TODO: // Handle embedded NUL bytes in the command line.
+
+config TOYSH
+	bool "sh (toysh)"
+	default y
+	help
+	  usage: sh [-c command] [script]
+
+	  The toybox command shell.  Runs a shell script, or else reads input
+	  interactively and responds to it.
+
+	  -c	command line to execute
+
+config TOYSH_TTY
+	bool "Interactive shell (terminal control)"
+	default n
+	depends on TOYSH
+	help
+	  Add terminal control to toysh.  This is necessary for interactive use,
+	  so the shell isn't killed by CTRL-C.
+
+config TOYSH_PROFILE
+	bool "Profile support"
+	default n
+	depends on TOYSH_TTY
+	help
+	  Read /etc/profile and ~/.profile when running interactively.
+
+	  Also enables the built-in command "source".
+
+config TOYSH_JOBCTL
+	bool "Job Control (fg, bg, jobs)"
+	default n
+	depends on TOYSH_TTY
+	help
+	  Add job control to toysh.  This lets toysh handle CTRL-Z, and enables
+	  the built-in commands "fg", "bg", and "jobs".
+
+	  With pipe support, enable use of "&" to run background processes.
+
+config TOYSH_FLOWCTL
+	bool "Flow control (if, while, for, functions)"
+	default n
+	depends on TOYSH
+	help
+	  Add flow control to toysh.  This enables the if/then/else/fi,
+	  while/do/done, and for/do/done constructs.
+
+	  With pipe support, this enables the ability to define functions
+	  using the "function name" or "name()" syntax, plus curly brackets
+	  "{ }" to group commands.
+
+config TOYSH_QUOTES
+	bool "Smarter argument parsing (quotes)"
+	default n
+	depends on TOYSH
+	help
+	  Add support for parsing "" and '' style quotes to the toysh command
+	  parser, with lets arguments have spaces in them.
+
+config TOYSH_WILDCARDS
+	bool "Wildcards ( ?*{,} )"
+	default n
+	depends on TOYSH_QUOTES
+	help
+	  Expand wildcards in argument names, ala "ls -l *.t?z" and
+	  "rm subdir/{one,two,three}.txt".
+
+config TOYSH_PROCARGS
+	bool "Executable arguments ( `` and $() )"
+	default n
+	depends on TOYSH_QUOTES
+	help
+	  Add support for executing arguments contianing $() and ``, using
+	  the output of the command as the new argument value(s).
+
+	  (Bash calls this "command substitution".)
+
+config TOYSH_ENVVARS
+	bool "Environment variable support"
+	default n
+	depends on TOYSH_QUOTES
+	help
+	  Substitute environment variable values for $VARNAME or ${VARNAME},
+	  and enable the built-in command "export".
+
+config TOYSH_LOCALS
+	bool "Local variables"
+	default n
+	depends on TOYSH_ENVVARS
+	help
+	  Support for local variables, fancy prompts ($PS1), the "set" command,
+	  and $?.
+
+config TOYSH_ARRAYS
+	bool "Array variables"
+	default n
+	depends on TOYSH_LOCALS
+	help
+	  Support for ${blah[blah]} style array variables.
+
+config TOYSH_PIPES
+	bool "Pipes and redirects ( | > >> < << & && | || () ; )"
+	default n
+	depends on TOYSH
+	help
+	  Support multiple commands on the same command line.  This includes
+	  | pipes, > >> < redirects, << here documents, || && conditional
+	  execution, () subshells, ; sequential execution, and (with job
+	  control) & background processes.
+
+config TOYSH_BUILTINS
+	bool "Builtin commands"
+	default n
+	depends on TOYSH
+	help
+	  Adds the commands exec, fg, bg, help, jobs, pwd, export, source, set,
+	  unset, read, alias.
+
+config EXIT
+	bool
+	default n
+	depends on TOYSH
+	help
+	  usage: exit [status]
+
+	  Exit shell.  If no return value supplied on command line, use value
+	  of most recent command, or 0 if none.
+
+config CD
+	bool
+	default n
+	depends on TOYSH
+	help
+	  usage: cd [path]
+
+	  Change current directory.  With no arguments, go to $HOME.
+
+config CD_P
+	bool # "-P support for cd"
+	default n
+	depends on TOYSH
+	help
+	  usage: cd [-PL]
+
+	  -P    Physical path: resolve symlinks in path.
+	  -L    Cancel previous -P and restore default behavior.
+*/
 
 #include "toys.h"
 
diff --git a/toys/true.c b/toys/true.c
index 055fb76..88e9590 100644
--- a/toys/true.c
+++ b/toys/true.c
@@ -1,9 +1,17 @@
-/* vi: set sw=4 ts=4: */
-/*
+/* vi: set sw=4 ts=4:
+ *
  * true.c - Return zero.
  *
+ * Copyright 2007 Rob Landley <rob@landley.net>
+ *
  * See http://www.opengroup.org/onlinepubs/009695399/utilities/true.html
- */
+
+config TRUE
+	bool "true"
+	default y
+	help
+	  Return zero.
+*/
 
 #include "toys.h"
 
diff --git a/toys/tty.c b/toys/tty.c
index 3dfba9e..a603e3e 100644
--- a/toys/tty.c
+++ b/toys/tty.c
@@ -1,8 +1,18 @@
-/* vi: set sw=4 ts=4: */
-/* tty.c - print terminal name of stdin
+/* vi: set sw=4 ts=4:
+ * tty.c - print terminal name of stdin
+ *
+ * Copyright 2007 Charlie Shepherd <masterdriverz@gentoo.org>
  *
  * See http://www.opengroup.org/onlinepubs/009695399/utilities/tty.html
- */
+
+config TTY
+	bool "tty"
+	default y
+	help
+	  Print the filename of the terminal connected to standard input.
+
+	  -s	Don't print anything, only return an exit status.
+*/
 
 #include "toys.h"
 
diff --git a/toys/which.c b/toys/which.c
index b8c0339..d7205fd 100644
--- a/toys/which.c
+++ b/toys/which.c
@@ -1,12 +1,21 @@
-/* vi: set sw=4 ts=4: */
-/*
+/* vi: set sw=4 ts=4:
+ *
  * which.c - Find executable files in $PATH.
  *
  * Copyright 2006 Rob landley <rob@landley.net>
  *
  * Not in SUSv3.
- */
 
+config WHICH
+	bool "which"
+	default y
+	help
+	  usage: which [-a] filename ...
+
+	  Search $PATH for executable files matching filename(s).
+
+	  -a	Show all matches
+*/
 #include "toys.h"
 
 #define OPT_a   1
diff --git a/toys/yes.c b/toys/yes.c
index d109199..501ea3a 100644
--- a/toys/yes.c
+++ b/toys/yes.c
@@ -1,9 +1,19 @@
-/* vi: set sw=4 ts=4: */
-/*
+/* vi: set sw=4 ts=4:
+ *
  * yes.c - Repeatedly output a string.
  *
+ * Copyright 2007 Rob Landley <rob@landley.net>
+ *
  * Not in SUSv3.
- */
+
+config YES
+	bool "yes"
+	default y
+	help
+	  usage: yes [args...]
+
+	  Repeatedly output line until killed.  If no args, output 'y'.
+*/
 
 #include "toys.h"