Revision created by MOE tool push_codebase.

MOE_MIGRATION=


git-svn-id: https://snappy.googlecode.com/svn/trunk@2 03e5f5b5-db94-4691-08a0-1a8bf15f6143

1 files changed, 523 insertions, 0 deletions

diff --git a/snappy-test.cc b/snappy-test.cc
new file mode 100644
index 0000000..ecb9bf4
--- /dev/null
+++ b/snappy-test.cc
@@ -0,0 +1,523 @@
+// Copyright 2011 Google Inc. All Rights Reserved.
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//      http://www.apache.org/licenses/LICENSE-2.0
+//
+//      Unless required by applicable law or agreed to in writing, software
+//      distributed under the License is distributed on an "AS IS" BASIS,
+//      WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+//      See the License for the specific language governing permissions and
+//      limitations under the License.
+//
+// Various stubs for the unit tests for the open-source version of Snappy.
+
+#include "snappy-test.h"
+
+#include <algorithm>
+
+DEFINE_bool(run_microbenchmarks, true,
+            "Run microbenchmarks before doing anything else.");
+
+namespace snappy {
+
+string ReadTestDataFile(const string& base) {
+  string contents;
+  const char* srcdir = getenv("srcdir");  // This is set by Automake.
+  if (srcdir) {
+    File::ReadFileToStringOrDie(
+        string(srcdir) + "/testdata/" + base, &contents);
+  } else {
+    File::ReadFileToStringOrDie("testdata/" + base, &contents);
+  }
+  return contents;
+}
+
+string StringPrintf(const char* format, ...) {
+  char buf[4096];
+  va_list ap;
+  va_start(ap, format);
+  vsnprintf(buf, sizeof(buf), format, ap);
+  va_end(ap);
+  return buf;
+}
+
+bool benchmark_running = false;
+int64 benchmark_real_time_us = 0;
+int64 benchmark_cpu_time_us = 0;
+string *benchmark_label = NULL;
+int64 benchmark_bytes_processed = 0;
+
+struct timeval benchmark_start_real;
+struct rusage benchmark_start_cpu;
+
+void ResetBenchmarkTiming() {
+  benchmark_real_time_us = 0;
+  benchmark_cpu_time_us = 0;
+}
+
+void StartBenchmarkTiming() {
+  gettimeofday(&benchmark_start_real, NULL);
+  if (getrusage(RUSAGE_SELF, &benchmark_start_cpu) == -1) {
+    perror("getrusage(RUSAGE_SELF)");
+    exit(1);
+  }
+  benchmark_running = true;
+}
+
+void StopBenchmarkTiming() {
+  if (!benchmark_running) {
+    return;
+  }
+  struct timeval benchmark_stop_real;
+  gettimeofday(&benchmark_stop_real, NULL);
+  benchmark_real_time_us +=
+      1000000 * (benchmark_stop_real.tv_sec - benchmark_start_real.tv_sec);
+  benchmark_real_time_us +=
+      (benchmark_stop_real.tv_usec - benchmark_start_real.tv_usec);
+
+  struct rusage benchmark_stop_cpu;
+  if (getrusage(RUSAGE_SELF, &benchmark_stop_cpu) == -1) {
+    perror("getrusage(RUSAGE_SELF)");
+    exit(1);
+  }
+  benchmark_cpu_time_us += 1000000 * (benchmark_stop_cpu.ru_utime.tv_sec -
+                                      benchmark_start_cpu.ru_utime.tv_sec);
+  benchmark_cpu_time_us += (benchmark_stop_cpu.ru_utime.tv_usec -
+                            benchmark_start_cpu.ru_utime.tv_usec);
+  benchmark_running = false;
+}
+
+void SetBenchmarkLabel(const string& str) {
+  if (benchmark_label) {
+    delete benchmark_label;
+  }
+  benchmark_label = new string(str);
+}
+
+void SetBenchmarkBytesProcessed(int64 bytes) {
+  benchmark_bytes_processed = bytes;
+}
+
+struct BenchmarkRun {
+  int64 real_time_us;
+  int64 cpu_time_us;
+};
+
+struct BenchmarkCompareCPUTime {
+  bool operator() (const BenchmarkRun& a, const BenchmarkRun& b) const {
+    return a.real_time_us < b.real_time_us;
+  }
+};
+
+void Benchmark::Run() {
+  for (int test_case_num = start_; test_case_num <= stop_; ++test_case_num) {
+    // Run a few iterations first to find out approximately how fast
+    // the benchmark is.
+    const int kCalibrateIterations = 100;
+    ResetBenchmarkTiming();
+    StartBenchmarkTiming();
+    (*function_)(kCalibrateIterations, test_case_num);
+    StopBenchmarkTiming();
+
+    // Let each test case run for about 200ms.
+    // Run five times and pick the median.
+    const int kNumRuns = 5;
+    const int kMedianPos = kNumRuns / 2;
+    int num_iterations = 200000 * kCalibrateIterations / benchmark_real_time_us;
+    BenchmarkRun benchmark_runs[kNumRuns];
+
+    for (int run = 0; run < kNumRuns; ++run) {
+      ResetBenchmarkTiming();
+      StartBenchmarkTiming();
+      (*function_)(num_iterations, test_case_num);
+      StopBenchmarkTiming();
+
+      benchmark_runs[run].real_time_us = benchmark_real_time_us;
+      benchmark_runs[run].cpu_time_us = benchmark_cpu_time_us;
+    }
+
+    sort(benchmark_runs, benchmark_runs + kNumRuns, BenchmarkCompareCPUTime());
+    int64 real_time_us = benchmark_runs[kMedianPos].real_time_us;
+    int64 cpu_time_us = benchmark_runs[kMedianPos].cpu_time_us;
+    int64 bytes_per_second = benchmark_bytes_processed * 1000000 / cpu_time_us;
+
+    string heading = StringPrintf("%s/%d", name_.c_str(), test_case_num);
+    string human_readable_speed;
+    if (bytes_per_second < 1024) {
+      human_readable_speed = StringPrintf("%dB/s", bytes_per_second);
+    } else if (bytes_per_second < 1024 * 1024) {
+      human_readable_speed = StringPrintf(
+          "%.1fkB/s", bytes_per_second / 1024.0f);
+    } else if (bytes_per_second < 1024 * 1024 * 1024) {
+      human_readable_speed = StringPrintf(
+          "%.1fMB/s", bytes_per_second / (1024.0f * 1024.0f));
+    } else {
+      human_readable_speed = StringPrintf(
+          "%.1fGB/s", bytes_per_second / (1024.0f * 1024.0f * 1024.0f));
+    }
+
+    fprintf(stderr, "%-18s %10lld %10lld %10d %s  %s\n",
+            heading.c_str(),
+            static_cast<long long>(real_time_us * 1000 / num_iterations),
+            static_cast<long long>(cpu_time_us * 1000 / num_iterations),
+            num_iterations,
+            human_readable_speed.c_str(),
+            benchmark_label->c_str());
+  }
+}
+
+#ifdef HAVE_LIBZ
+
+ZLib::ZLib()
+    : comp_init_(false),
+      uncomp_init_(false) {
+  Reinit();
+}
+
+ZLib::~ZLib() {
+  if (comp_init_)   { deflateEnd(&comp_stream_); }
+  if (uncomp_init_) { inflateEnd(&uncomp_stream_); }
+}
+
+void ZLib::Reinit() {
+  compression_level_ = Z_DEFAULT_COMPRESSION;
+  window_bits_ = MAX_WBITS;
+  mem_level_ =  8;  // DEF_MEM_LEVEL
+  if (comp_init_) {
+    deflateEnd(&comp_stream_);
+    comp_init_ = false;
+  }
+  if (uncomp_init_) {
+    inflateEnd(&uncomp_stream_);
+    uncomp_init_ = false;
+  }
+  first_chunk_ = true;
+}
+
+void ZLib::Reset() {
+  first_chunk_ = true;
+}
+
+// --------- COMPRESS MODE
+
+// Initialization method to be called if we hit an error while
+// compressing. On hitting an error, call this method before returning
+// the error.
+void ZLib::CompressErrorInit() {
+  deflateEnd(&comp_stream_);
+  comp_init_ = false;
+  Reset();
+}
+
+int ZLib::DeflateInit() {
+  return deflateInit2(&comp_stream_,
+                      compression_level_,
+                      Z_DEFLATED,
+                      window_bits_,
+                      mem_level_,
+                      Z_DEFAULT_STRATEGY);
+}
+
+int ZLib::CompressInit(Bytef *dest, uLongf *destLen,
+                       const Bytef *source, uLong *sourceLen) {
+  int err;
+
+  comp_stream_.next_in = (Bytef*)source;
+  comp_stream_.avail_in = (uInt)*sourceLen;
+  if ((uLong)comp_stream_.avail_in != *sourceLen) return Z_BUF_ERROR;
+  comp_stream_.next_out = dest;
+  comp_stream_.avail_out = (uInt)*destLen;
+  if ((uLong)comp_stream_.avail_out != *destLen) return Z_BUF_ERROR;
+
+  if ( !first_chunk_ )   // only need to set up stream the first time through
+    return Z_OK;
+
+  if (comp_init_) {      // we've already initted it
+    err = deflateReset(&comp_stream_);
+    if (err != Z_OK) {
+      LOG(WARNING) << "ERROR: Can't reset compress object; creating a new one";
+      deflateEnd(&comp_stream_);
+      comp_init_ = false;
+    }
+  }
+  if (!comp_init_) {     // first use
+    comp_stream_.zalloc = (alloc_func)0;
+    comp_stream_.zfree = (free_func)0;
+    comp_stream_.opaque = (voidpf)0;
+    err = DeflateInit();
+    if (err != Z_OK) return err;
+    comp_init_ = true;
+  }
+  return Z_OK;
+}
+
+// In a perfect world we'd always have the full buffer to compress
+// when the time came, and we could just call Compress().  Alas, we
+// want to do chunked compression on our webserver.  In this
+// application, we compress the header, send it off, then compress the
+// results, send them off, then compress the footer.  Thus we need to
+// use the chunked compression features of zlib.
+int ZLib::CompressAtMostOrAll(Bytef *dest, uLongf *destLen,
+                              const Bytef *source, uLong *sourceLen,
+                              int flush_mode) {   // Z_FULL_FLUSH or Z_FINISH
+  int err;
+
+  if ( (err=CompressInit(dest, destLen, source, sourceLen)) != Z_OK )
+    return err;
+
+  // This is used to figure out how many bytes we wrote *this chunk*
+  int compressed_size = comp_stream_.total_out;
+
+  // Some setup happens only for the first chunk we compress in a run
+  if ( first_chunk_ ) {
+    first_chunk_ = false;
+  }
+
+  // flush_mode is Z_FINISH for all mode, Z_SYNC_FLUSH for incremental
+  // compression.
+  err = deflate(&comp_stream_, flush_mode);
+
+  const uLong source_bytes_consumed = *sourceLen - comp_stream_.avail_in;
+  *sourceLen = comp_stream_.avail_in;
+
+  if ((err == Z_STREAM_END || err == Z_OK)
+      && comp_stream_.avail_in == 0
+      && comp_stream_.avail_out != 0 ) {
+    // we processed everything ok and the output buffer was large enough.
+    ;
+  } else if (err == Z_STREAM_END && comp_stream_.avail_in > 0) {
+    return Z_BUF_ERROR;                            // should never happen
+  } else if (err != Z_OK && err != Z_STREAM_END && err != Z_BUF_ERROR) {
+    // an error happened
+    CompressErrorInit();
+    return err;
+  } else if (comp_stream_.avail_out == 0) {     // not enough space
+    err = Z_BUF_ERROR;
+  }
+
+  assert(err == Z_OK || err == Z_STREAM_END || err == Z_BUF_ERROR);
+  if (err == Z_STREAM_END)
+    err = Z_OK;
+
+  // update the crc and other metadata
+  compressed_size = comp_stream_.total_out - compressed_size;  // delta
+  *destLen = compressed_size;
+
+  return err;
+}
+
+int ZLib::CompressChunkOrAll(Bytef *dest, uLongf *destLen,
+                             const Bytef *source, uLong sourceLen,
+                             int flush_mode) {   // Z_FULL_FLUSH or Z_FINISH
+  const int ret =
+    CompressAtMostOrAll(dest, destLen, source, &sourceLen, flush_mode);
+  if (ret == Z_BUF_ERROR)
+    CompressErrorInit();
+  return ret;
+}
+
+// This routine only initializes the compression stream once.  Thereafter, it
+// just does a deflateReset on the stream, which should be faster.
+int ZLib::Compress(Bytef *dest, uLongf *destLen,
+                   const Bytef *source, uLong sourceLen) {
+  int err;
+  const uLongf orig_destLen = *destLen;
+  if ( (err=CompressChunkOrAll(dest, destLen, source, sourceLen,
+                               Z_FINISH)) != Z_OK )
+    return err;
+  Reset();         // reset for next call to Compress
+
+  return Z_OK;
+}
+
+
+// --------- UNCOMPRESS MODE
+
+int ZLib::InflateInit() {
+  return inflateInit2(&uncomp_stream_, MAX_WBITS);
+}
+
+// Initialization method to be called if we hit an error while
+// uncompressing. On hitting an error, call this method before
+// returning the error.
+void ZLib::UncompressErrorInit() {
+  inflateEnd(&uncomp_stream_);
+  uncomp_init_ = false;
+  Reset();
+}
+
+int ZLib::UncompressInit(Bytef *dest, uLongf *destLen,
+                         const Bytef *source, uLong *sourceLen) {
+  int err;
+
+  uncomp_stream_.next_in = (Bytef*)source;
+  uncomp_stream_.avail_in = (uInt)*sourceLen;
+  // Check for source > 64K on 16-bit machine:
+  if ((uLong)uncomp_stream_.avail_in != *sourceLen) return Z_BUF_ERROR;
+
+  uncomp_stream_.next_out = dest;
+  uncomp_stream_.avail_out = (uInt)*destLen;
+  if ((uLong)uncomp_stream_.avail_out != *destLen) return Z_BUF_ERROR;
+
+  if ( !first_chunk_ )   // only need to set up stream the first time through
+    return Z_OK;
+
+  if (uncomp_init_) {    // we've already initted it
+    err = inflateReset(&uncomp_stream_);
+    if (err != Z_OK) {
+      LOG(WARNING)
+        << "ERROR: Can't reset uncompress object; creating a new one";
+      UncompressErrorInit();
+    }
+  }
+  if (!uncomp_init_) {
+    uncomp_stream_.zalloc = (alloc_func)0;
+    uncomp_stream_.zfree = (free_func)0;
+    uncomp_stream_.opaque = (voidpf)0;
+    err = InflateInit();
+    if (err != Z_OK) return err;
+    uncomp_init_ = true;
+  }
+  return Z_OK;
+}
+
+// If you compressed your data a chunk at a time, with CompressChunk,
+// you can uncompress it a chunk at a time with UncompressChunk.
+// Only difference bewteen chunked and unchunked uncompression
+// is the flush mode we use: Z_SYNC_FLUSH (chunked) or Z_FINISH (unchunked).
+int ZLib::UncompressAtMostOrAll(Bytef *dest, uLongf *destLen,
+                                const Bytef *source, uLong *sourceLen,
+                                int flush_mode) {  // Z_SYNC_FLUSH or Z_FINISH
+  int err = Z_OK;
+
+  if ( (err=UncompressInit(dest, destLen, source, sourceLen)) != Z_OK ) {
+    LOG(WARNING) << "UncompressInit: Error: " << err << " SourceLen: "
+                 << *sourceLen;
+    return err;
+  }
+
+  // This is used to figure out how many output bytes we wrote *this chunk*:
+  const uLong old_total_out = uncomp_stream_.total_out;
+
+  // This is used to figure out how many input bytes we read *this chunk*:
+  const uLong old_total_in = uncomp_stream_.total_in;
+
+  // Some setup happens only for the first chunk we compress in a run
+  if ( first_chunk_ ) {
+    first_chunk_ = false;                          // so we don't do this again
+
+    // For the first chunk *only* (to avoid infinite troubles), we let
+    // there be no actual data to uncompress.  This sometimes triggers
+    // when the input is only the gzip header, say.
+    if ( *sourceLen == 0 ) {
+      *destLen = 0;
+      return Z_OK;
+    }
+  }
+
+  // We'll uncompress as much as we can.  If we end OK great, otherwise
+  // if we get an error that seems to be the gzip footer, we store the
+  // gzip footer and return OK, otherwise we return the error.
+
+  // flush_mode is Z_SYNC_FLUSH for chunked mode, Z_FINISH for all mode.
+  err = inflate(&uncomp_stream_, flush_mode);
+
+  // Figure out how many bytes of the input zlib slurped up:
+  const uLong bytes_read = uncomp_stream_.total_in - old_total_in;
+  CHECK_LE(source + bytes_read, source + *sourceLen);
+  *sourceLen = uncomp_stream_.avail_in;
+
+  if ((err == Z_STREAM_END || err == Z_OK)  // everything went ok
+             && uncomp_stream_.avail_in == 0) {    // and we read it all
+    ;
+  } else if (err == Z_STREAM_END && uncomp_stream_.avail_in > 0) {
+    LOG(WARNING)
+      << "UncompressChunkOrAll: Received some extra data, bytes total: "
+      << uncomp_stream_.avail_in << " bytes: "
+      << string(reinterpret_cast<const char *>(uncomp_stream_.next_in),
+                min(int(uncomp_stream_.avail_in), 20));
+    UncompressErrorInit();
+    return Z_DATA_ERROR;       // what's the extra data for?
+  } else if (err != Z_OK && err != Z_STREAM_END && err != Z_BUF_ERROR) {
+    // an error happened
+    LOG(WARNING) << "UncompressChunkOrAll: Error: " << err
+                 << " avail_out: " << uncomp_stream_.avail_out;
+    UncompressErrorInit();
+    return err;
+  } else if (uncomp_stream_.avail_out == 0) {
+    err = Z_BUF_ERROR;
+  }
+
+  assert(err == Z_OK || err == Z_BUF_ERROR || err == Z_STREAM_END);
+  if (err == Z_STREAM_END)
+    err = Z_OK;
+
+  *destLen = uncomp_stream_.total_out - old_total_out;  // size for this call
+
+  return err;
+}
+
+int ZLib::UncompressChunkOrAll(Bytef *dest, uLongf *destLen,
+                               const Bytef *source, uLong sourceLen,
+                               int flush_mode) {  // Z_SYNC_FLUSH or Z_FINISH
+  const int ret =
+    UncompressAtMostOrAll(dest, destLen, source, &sourceLen, flush_mode);
+  if (ret == Z_BUF_ERROR)
+    UncompressErrorInit();
+  return ret;
+}
+
+int ZLib::UncompressAtMost(Bytef *dest, uLongf *destLen,
+                          const Bytef *source, uLong *sourceLen) {
+  return UncompressAtMostOrAll(dest, destLen, source, sourceLen, Z_SYNC_FLUSH);
+}
+
+// We make sure we've uncompressed everything, that is, the current
+// uncompress stream is at a compressed-buffer-EOF boundary.  In gzip
+// mode, we also check the gzip footer to make sure we pass the gzip
+// consistency checks.  We RETURN true iff both types of checks pass.
+bool ZLib::UncompressChunkDone() {
+  assert(!first_chunk_ && uncomp_init_);
+  // Make sure we're at the end-of-compressed-data point.  This means
+  // if we call inflate with Z_FINISH we won't consume any input or
+  // write any output
+  Bytef dummyin, dummyout;
+  uLongf dummylen = 0;
+  if ( UncompressChunkOrAll(&dummyout, &dummylen, &dummyin, 0, Z_FINISH)
+       != Z_OK ) {
+    return false;
+  }
+
+  // Make sure that when we exit, we can start a new round of chunks later
+  Reset();
+
+  return true;
+}
+
+// Uncompresses the source buffer into the destination buffer.
+// The destination buffer must be long enough to hold the entire
+// decompressed contents.
+//
+// We only initialize the uncomp_stream once.  Thereafter, we use
+// inflateReset, which should be faster.
+//
+// Returns Z_OK on success, otherwise, it returns a zlib error code.
+int ZLib::Uncompress(Bytef *dest, uLongf *destLen,
+                     const Bytef *source, uLong sourceLen) {
+  int err;
+  if ( (err=UncompressChunkOrAll(dest, destLen, source, sourceLen,
+                                 Z_FINISH)) != Z_OK ) {
+    Reset();                           // let us try to compress again
+    return err;
+  }
+  if ( !UncompressChunkDone() )        // calls Reset()
+    return Z_DATA_ERROR;
+  return Z_OK;  // stream_end is ok
+}
+
+#endif  // HAVE_LIBZ
+
+}  // namespace snappy