Remove i810_drm.h and i830_drm.h from the distribution tarball

Both of these headers are not installed since they were imported.
They  are not even used internally. The latter no longer exist in the
kernel...

Note the * symbol in EXTRA_DIST causes 'make distcheck' to fail. When
was the last time we ran it ?

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Damien Lespiau <damien.lespiau@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>

2 files changed, 0 insertions, 623 deletions

diff --git a/include/drm/i810_drm.h b/include/drm/i810_drm.h
deleted file mode 100644
index 7a10bb6f..00000000
--- a/include/drm/i810_drm.h
+++ /dev/null
@@ -1,281 +0,0 @@
-#ifndef _I810_DRM_H_
-#define _I810_DRM_H_
-
-/* WARNING: These defines must be the same as what the Xserver uses.
- * if you change them, you must change the defines in the Xserver.
- */
-
-#ifndef _I810_DEFINES_
-#define _I810_DEFINES_
-
-#define I810_DMA_BUF_ORDER		12
-#define I810_DMA_BUF_SZ 		(1<<I810_DMA_BUF_ORDER)
-#define I810_DMA_BUF_NR 		256
-#define I810_NR_SAREA_CLIPRECTS 	8
-
-/* Each region is a minimum of 64k, and there are at most 64 of them.
- */
-#define I810_NR_TEX_REGIONS 64
-#define I810_LOG_MIN_TEX_REGION_SIZE 16
-#endif
-
-#define I810_UPLOAD_TEX0IMAGE  0x1	/* handled clientside */
-#define I810_UPLOAD_TEX1IMAGE  0x2	/* handled clientside */
-#define I810_UPLOAD_CTX        0x4
-#define I810_UPLOAD_BUFFERS    0x8
-#define I810_UPLOAD_TEX0       0x10
-#define I810_UPLOAD_TEX1       0x20
-#define I810_UPLOAD_CLIPRECTS  0x40
-
-/* Indices into buf.Setup where various bits of state are mirrored per
- * context and per buffer.  These can be fired at the card as a unit,
- * or in a piecewise fashion as required.
- */
-
-/* Destbuffer state
- *    - backbuffer linear offset and pitch -- invarient in the current dri
- *    - zbuffer linear offset and pitch -- also invarient
- *    - drawing origin in back and depth buffers.
- *
- * Keep the depth/back buffer state here to accommodate private buffers
- * in the future.
- */
-#define I810_DESTREG_DI0  0	/* CMD_OP_DESTBUFFER_INFO (2 dwords) */
-#define I810_DESTREG_DI1  1
-#define I810_DESTREG_DV0  2	/* GFX_OP_DESTBUFFER_VARS (2 dwords) */
-#define I810_DESTREG_DV1  3
-#define I810_DESTREG_DR0  4	/* GFX_OP_DRAWRECT_INFO (4 dwords) */
-#define I810_DESTREG_DR1  5
-#define I810_DESTREG_DR2  6
-#define I810_DESTREG_DR3  7
-#define I810_DESTREG_DR4  8
-#define I810_DEST_SETUP_SIZE 10
-
-/* Context state
- */
-#define I810_CTXREG_CF0   0	/* GFX_OP_COLOR_FACTOR */
-#define I810_CTXREG_CF1   1
-#define I810_CTXREG_ST0   2	/* GFX_OP_STIPPLE */
-#define I810_CTXREG_ST1   3
-#define I810_CTXREG_VF    4	/* GFX_OP_VERTEX_FMT */
-#define I810_CTXREG_MT    5	/* GFX_OP_MAP_TEXELS */
-#define I810_CTXREG_MC0   6	/* GFX_OP_MAP_COLOR_STAGES - stage 0 */
-#define I810_CTXREG_MC1   7	/* GFX_OP_MAP_COLOR_STAGES - stage 1 */
-#define I810_CTXREG_MC2   8	/* GFX_OP_MAP_COLOR_STAGES - stage 2 */
-#define I810_CTXREG_MA0   9	/* GFX_OP_MAP_ALPHA_STAGES - stage 0 */
-#define I810_CTXREG_MA1   10	/* GFX_OP_MAP_ALPHA_STAGES - stage 1 */
-#define I810_CTXREG_MA2   11	/* GFX_OP_MAP_ALPHA_STAGES - stage 2 */
-#define I810_CTXREG_SDM   12	/* GFX_OP_SRC_DEST_MONO */
-#define I810_CTXREG_FOG   13	/* GFX_OP_FOG_COLOR */
-#define I810_CTXREG_B1    14	/* GFX_OP_BOOL_1 */
-#define I810_CTXREG_B2    15	/* GFX_OP_BOOL_2 */
-#define I810_CTXREG_LCS   16	/* GFX_OP_LINEWIDTH_CULL_SHADE_MODE */
-#define I810_CTXREG_PV    17	/* GFX_OP_PV_RULE -- Invarient! */
-#define I810_CTXREG_ZA    18	/* GFX_OP_ZBIAS_ALPHAFUNC */
-#define I810_CTXREG_AA    19	/* GFX_OP_ANTIALIAS */
-#define I810_CTX_SETUP_SIZE 20
-
-/* Texture state (per tex unit)
- */
-#define I810_TEXREG_MI0  0	/* GFX_OP_MAP_INFO (4 dwords) */
-#define I810_TEXREG_MI1  1
-#define I810_TEXREG_MI2  2
-#define I810_TEXREG_MI3  3
-#define I810_TEXREG_MF   4	/* GFX_OP_MAP_FILTER */
-#define I810_TEXREG_MLC  5	/* GFX_OP_MAP_LOD_CTL */
-#define I810_TEXREG_MLL  6	/* GFX_OP_MAP_LOD_LIMITS */
-#define I810_TEXREG_MCS  7	/* GFX_OP_MAP_COORD_SETS ??? */
-#define I810_TEX_SETUP_SIZE 8
-
-/* Flags for clear ioctl
- */
-#define I810_FRONT   0x1
-#define I810_BACK    0x2
-#define I810_DEPTH   0x4
-
-typedef enum _drm_i810_init_func {
-	I810_INIT_DMA = 0x01,
-	I810_CLEANUP_DMA = 0x02,
-	I810_INIT_DMA_1_4 = 0x03
-} drm_i810_init_func_t;
-
-/* This is the init structure after v1.2 */
-typedef struct _drm_i810_init {
-	drm_i810_init_func_t func;
-	unsigned int mmio_offset;
-	unsigned int buffers_offset;
-	int sarea_priv_offset;
-	unsigned int ring_start;
-	unsigned int ring_end;
-	unsigned int ring_size;
-	unsigned int front_offset;
-	unsigned int back_offset;
-	unsigned int depth_offset;
-	unsigned int overlay_offset;
-	unsigned int overlay_physical;
-	unsigned int w;
-	unsigned int h;
-	unsigned int pitch;
-	unsigned int pitch_bits;
-} drm_i810_init_t;
-
-/* This is the init structure prior to v1.2 */
-typedef struct _drm_i810_pre12_init {
-	drm_i810_init_func_t func;
-	unsigned int mmio_offset;
-	unsigned int buffers_offset;
-	int sarea_priv_offset;
-	unsigned int ring_start;
-	unsigned int ring_end;
-	unsigned int ring_size;
-	unsigned int front_offset;
-	unsigned int back_offset;
-	unsigned int depth_offset;
-	unsigned int w;
-	unsigned int h;
-	unsigned int pitch;
-	unsigned int pitch_bits;
-} drm_i810_pre12_init_t;
-
-/* Warning: If you change the SAREA structure you must change the Xserver
- * structure as well */
-
-typedef struct _drm_i810_tex_region {
-	unsigned char next, prev;	/* indices to form a circular LRU  */
-	unsigned char in_use;	/* owned by a client, or free? */
-	int age;		/* tracked by clients to update local LRU's */
-} drm_i810_tex_region_t;
-
-typedef struct _drm_i810_sarea {
-	unsigned int ContextState[I810_CTX_SETUP_SIZE];
-	unsigned int BufferState[I810_DEST_SETUP_SIZE];
-	unsigned int TexState[2][I810_TEX_SETUP_SIZE];
-	unsigned int dirty;
-
-	unsigned int nbox;
-	struct drm_clip_rect boxes[I810_NR_SAREA_CLIPRECTS];
-
-	/* Maintain an LRU of contiguous regions of texture space.  If
-	 * you think you own a region of texture memory, and it has an
-	 * age different to the one you set, then you are mistaken and
-	 * it has been stolen by another client.  If global texAge
-	 * hasn't changed, there is no need to walk the list.
-	 *
-	 * These regions can be used as a proxy for the fine-grained
-	 * texture information of other clients - by maintaining them
-	 * in the same lru which is used to age their own textures,
-	 * clients have an approximate lru for the whole of global
-	 * texture space, and can make informed decisions as to which
-	 * areas to kick out.  There is no need to choose whether to
-	 * kick out your own texture or someone else's - simply eject
-	 * them all in LRU order.
-	 */
-
-	drm_i810_tex_region_t texList[I810_NR_TEX_REGIONS + 1];
-	/* Last elt is sentinal */
-	int texAge;		/* last time texture was uploaded */
-	int last_enqueue;	/* last time a buffer was enqueued */
-	int last_dispatch;	/* age of the most recently dispatched buffer */
-	int last_quiescent;	/*  */
-	int ctxOwner;		/* last context to upload state */
-
-	int vertex_prim;
-
-	int pf_enabled;		/* is pageflipping allowed? */
-	int pf_active;
-	int pf_current_page;	/* which buffer is being displayed? */
-} drm_i810_sarea_t;
-
-/* WARNING: If you change any of these defines, make sure to change the
- * defines in the Xserver file (xf86drmMga.h)
- */
-
-/* i810 specific ioctls
- * The device specific ioctl range is 0x40 to 0x79.
- */
-#define DRM_I810_INIT		0x00
-#define DRM_I810_VERTEX		0x01
-#define DRM_I810_CLEAR		0x02
-#define DRM_I810_FLUSH		0x03
-#define DRM_I810_GETAGE		0x04
-#define DRM_I810_GETBUF		0x05
-#define DRM_I810_SWAP		0x06
-#define DRM_I810_COPY		0x07
-#define DRM_I810_DOCOPY		0x08
-#define DRM_I810_OV0INFO	0x09
-#define DRM_I810_FSTATUS	0x0a
-#define DRM_I810_OV0FLIP	0x0b
-#define DRM_I810_MC		0x0c
-#define DRM_I810_RSTATUS	0x0d
-#define DRM_I810_FLIP		0x0e
-
-#define DRM_IOCTL_I810_INIT		DRM_IOW( DRM_COMMAND_BASE + DRM_I810_INIT, drm_i810_init_t)
-#define DRM_IOCTL_I810_VERTEX		DRM_IOW( DRM_COMMAND_BASE + DRM_I810_VERTEX, drm_i810_vertex_t)
-#define DRM_IOCTL_I810_CLEAR		DRM_IOW( DRM_COMMAND_BASE + DRM_I810_CLEAR, drm_i810_clear_t)
-#define DRM_IOCTL_I810_FLUSH		DRM_IO(  DRM_COMMAND_BASE + DRM_I810_FLUSH)
-#define DRM_IOCTL_I810_GETAGE		DRM_IO(  DRM_COMMAND_BASE + DRM_I810_GETAGE)
-#define DRM_IOCTL_I810_GETBUF		DRM_IOWR(DRM_COMMAND_BASE + DRM_I810_GETBUF, drm_i810_dma_t)
-#define DRM_IOCTL_I810_SWAP		DRM_IO(  DRM_COMMAND_BASE + DRM_I810_SWAP)
-#define DRM_IOCTL_I810_COPY		DRM_IOW( DRM_COMMAND_BASE + DRM_I810_COPY, drm_i810_copy_t)
-#define DRM_IOCTL_I810_DOCOPY		DRM_IO(  DRM_COMMAND_BASE + DRM_I810_DOCOPY)
-#define DRM_IOCTL_I810_OV0INFO		DRM_IOR( DRM_COMMAND_BASE + DRM_I810_OV0INFO, drm_i810_overlay_t)
-#define DRM_IOCTL_I810_FSTATUS		DRM_IO ( DRM_COMMAND_BASE + DRM_I810_FSTATUS)
-#define DRM_IOCTL_I810_OV0FLIP		DRM_IO ( DRM_COMMAND_BASE + DRM_I810_OV0FLIP)
-#define DRM_IOCTL_I810_MC		DRM_IOW( DRM_COMMAND_BASE + DRM_I810_MC, drm_i810_mc_t)
-#define DRM_IOCTL_I810_RSTATUS		DRM_IO ( DRM_COMMAND_BASE + DRM_I810_RSTATUS)
-#define DRM_IOCTL_I810_FLIP             DRM_IO ( DRM_COMMAND_BASE + DRM_I810_FLIP)
-
-typedef struct _drm_i810_clear {
-	int clear_color;
-	int clear_depth;
-	int flags;
-} drm_i810_clear_t;
-
-/* These may be placeholders if we have more cliprects than
- * I810_NR_SAREA_CLIPRECTS.  In that case, the client sets discard to
- * false, indicating that the buffer will be dispatched again with a
- * new set of cliprects.
- */
-typedef struct _drm_i810_vertex {
-	int idx;		/* buffer index */
-	int used;		/* nr bytes in use */
-	int discard;		/* client is finished with the buffer? */
-} drm_i810_vertex_t;
-
-typedef struct _drm_i810_copy_t {
-	int idx;		/* buffer index */
-	int used;		/* nr bytes in use */
-	void *address;		/* Address to copy from */
-} drm_i810_copy_t;
-
-#define PR_TRIANGLES         (0x0<<18)
-#define PR_TRISTRIP_0        (0x1<<18)
-#define PR_TRISTRIP_1        (0x2<<18)
-#define PR_TRIFAN            (0x3<<18)
-#define PR_POLYGON           (0x4<<18)
-#define PR_LINES             (0x5<<18)
-#define PR_LINESTRIP         (0x6<<18)
-#define PR_RECTS             (0x7<<18)
-#define PR_MASK              (0x7<<18)
-
-typedef struct drm_i810_dma {
-	void *virtual;
-	int request_idx;
-	int request_size;
-	int granted;
-} drm_i810_dma_t;
-
-typedef struct _drm_i810_overlay_t {
-	unsigned int offset;	/* Address of the Overlay Regs */
-	unsigned int physical;
-} drm_i810_overlay_t;
-
-typedef struct _drm_i810_mc {
-	int idx;		/* buffer index */
-	int used;		/* nr bytes in use */
-	int num_blocks;		/* number of GFXBlocks */
-	int *length;		/* List of lengths for GFXBlocks (FUTURE) */
-	unsigned int last_render;	/* Last Render Request */
-} drm_i810_mc_t;
-
-#endif				/* _I810_DRM_H_ */
diff --git a/include/drm/i830_drm.h b/include/drm/i830_drm.h
deleted file mode 100644
index e1b08e4d..00000000
--- a/include/drm/i830_drm.h
+++ /dev/null
@@ -1,342 +0,0 @@
-#ifndef _I830_DRM_H_
-#define _I830_DRM_H_
-
-/* WARNING: These defines must be the same as what the Xserver uses.
- * if you change them, you must change the defines in the Xserver.
- *
- * KW: Actually, you can't ever change them because doing so would
- * break backwards compatibility.
- */
-
-#ifndef _I830_DEFINES_
-#define _I830_DEFINES_
-
-#define I830_DMA_BUF_ORDER		12
-#define I830_DMA_BUF_SZ			(1<<I830_DMA_BUF_ORDER)
-#define I830_DMA_BUF_NR			256
-#define I830_NR_SAREA_CLIPRECTS		8
-
-/* Each region is a minimum of 64k, and there are at most 64 of them.
- */
-#define I830_NR_TEX_REGIONS 64
-#define I830_LOG_MIN_TEX_REGION_SIZE 16
-
-/* KW: These aren't correct but someone set them to two and then
- * released the module.  Now we can't change them as doing so would
- * break backwards compatibility.
- */
-#define I830_TEXTURE_COUNT	2
-#define I830_TEXBLEND_COUNT	I830_TEXTURE_COUNT
-
-#define I830_TEXBLEND_SIZE	12	/* (4 args + op) * 2 + COLOR_FACTOR */
-
-#define I830_UPLOAD_CTX			0x1
-#define I830_UPLOAD_BUFFERS		0x2
-#define I830_UPLOAD_CLIPRECTS		0x4
-#define I830_UPLOAD_TEX0_IMAGE		0x100	/* handled clientside */
-#define I830_UPLOAD_TEX0_CUBE		0x200	/* handled clientside */
-#define I830_UPLOAD_TEX1_IMAGE		0x400	/* handled clientside */
-#define I830_UPLOAD_TEX1_CUBE		0x800	/* handled clientside */
-#define I830_UPLOAD_TEX2_IMAGE		0x1000	/* handled clientside */
-#define I830_UPLOAD_TEX2_CUBE		0x2000	/* handled clientside */
-#define I830_UPLOAD_TEX3_IMAGE		0x4000	/* handled clientside */
-#define I830_UPLOAD_TEX3_CUBE		0x8000	/* handled clientside */
-#define I830_UPLOAD_TEX_N_IMAGE(n)	(0x100 << (n * 2))
-#define I830_UPLOAD_TEX_N_CUBE(n)	(0x200 << (n * 2))
-#define I830_UPLOAD_TEXIMAGE_MASK	0xff00
-#define I830_UPLOAD_TEX0			0x10000
-#define I830_UPLOAD_TEX1			0x20000
-#define I830_UPLOAD_TEX2			0x40000
-#define I830_UPLOAD_TEX3			0x80000
-#define I830_UPLOAD_TEX_N(n)		(0x10000 << (n))
-#define I830_UPLOAD_TEX_MASK		0xf0000
-#define I830_UPLOAD_TEXBLEND0		0x100000
-#define I830_UPLOAD_TEXBLEND1		0x200000
-#define I830_UPLOAD_TEXBLEND2		0x400000
-#define I830_UPLOAD_TEXBLEND3		0x800000
-#define I830_UPLOAD_TEXBLEND_N(n)	(0x100000 << (n))
-#define I830_UPLOAD_TEXBLEND_MASK	0xf00000
-#define I830_UPLOAD_TEX_PALETTE_N(n)    (0x1000000 << (n))
-#define I830_UPLOAD_TEX_PALETTE_SHARED	0x4000000
-#define I830_UPLOAD_STIPPLE		0x8000000
-
-/* Indices into buf.Setup where various bits of state are mirrored per
- * context and per buffer.  These can be fired at the card as a unit,
- * or in a piecewise fashion as required.
- */
-
-/* Destbuffer state
- *    - backbuffer linear offset and pitch -- invarient in the current dri
- *    - zbuffer linear offset and pitch -- also invarient
- *    - drawing origin in back and depth buffers.
- *
- * Keep the depth/back buffer state here to accommodate private buffers
- * in the future.
- */
-
-#define I830_DESTREG_CBUFADDR 0
-#define I830_DESTREG_DBUFADDR 1
-#define I830_DESTREG_DV0 2
-#define I830_DESTREG_DV1 3
-#define I830_DESTREG_SENABLE 4
-#define I830_DESTREG_SR0 5
-#define I830_DESTREG_SR1 6
-#define I830_DESTREG_SR2 7
-#define I830_DESTREG_DR0 8
-#define I830_DESTREG_DR1 9
-#define I830_DESTREG_DR2 10
-#define I830_DESTREG_DR3 11
-#define I830_DESTREG_DR4 12
-#define I830_DEST_SETUP_SIZE 13
-
-/* Context state
- */
-#define I830_CTXREG_STATE1		0
-#define I830_CTXREG_STATE2		1
-#define I830_CTXREG_STATE3		2
-#define I830_CTXREG_STATE4		3
-#define I830_CTXREG_STATE5		4
-#define I830_CTXREG_IALPHAB		5
-#define I830_CTXREG_STENCILTST		6
-#define I830_CTXREG_ENABLES_1		7
-#define I830_CTXREG_ENABLES_2		8
-#define I830_CTXREG_AA			9
-#define I830_CTXREG_FOGCOLOR		10
-#define I830_CTXREG_BLENDCOLR0		11
-#define I830_CTXREG_BLENDCOLR		12	/* Dword 1 of 2 dword command */
-#define I830_CTXREG_VF			13
-#define I830_CTXREG_VF2			14
-#define I830_CTXREG_MCSB0		15
-#define I830_CTXREG_MCSB1		16
-#define I830_CTX_SETUP_SIZE		17
-
-/* 1.3: Stipple state
- */
-#define I830_STPREG_ST0 0
-#define I830_STPREG_ST1 1
-#define I830_STP_SETUP_SIZE 2
-
-/* Texture state (per tex unit)
- */
-
-#define I830_TEXREG_MI0	0	/* GFX_OP_MAP_INFO (6 dwords) */
-#define I830_TEXREG_MI1	1
-#define I830_TEXREG_MI2	2
-#define I830_TEXREG_MI3	3
-#define I830_TEXREG_MI4	4
-#define I830_TEXREG_MI5	5
-#define I830_TEXREG_MF	6	/* GFX_OP_MAP_FILTER */
-#define I830_TEXREG_MLC	7	/* GFX_OP_MAP_LOD_CTL */
-#define I830_TEXREG_MLL	8	/* GFX_OP_MAP_LOD_LIMITS */
-#define I830_TEXREG_MCS	9	/* GFX_OP_MAP_COORD_SETS */
-#define I830_TEX_SETUP_SIZE 10
-
-#define I830_TEXREG_TM0LI      0	/* load immediate 2 texture map n */
-#define I830_TEXREG_TM0S0      1
-#define I830_TEXREG_TM0S1      2
-#define I830_TEXREG_TM0S2      3
-#define I830_TEXREG_TM0S3      4
-#define I830_TEXREG_TM0S4      5
-#define I830_TEXREG_NOP0       6	/* noop */
-#define I830_TEXREG_NOP1       7	/* noop */
-#define I830_TEXREG_NOP2       8	/* noop */
-#define __I830_TEXREG_MCS      9	/* GFX_OP_MAP_COORD_SETS -- shared */
-#define __I830_TEX_SETUP_SIZE   10
-
-#define I830_FRONT   0x1
-#define I830_BACK    0x2
-#define I830_DEPTH   0x4
-
-#endif				/* _I830_DEFINES_ */
-
-typedef struct _drm_i830_init {
-	enum {
-		I830_INIT_DMA = 0x01,
-		I830_CLEANUP_DMA = 0x02
-	} func;
-	unsigned int mmio_offset;
-	unsigned int buffers_offset;
-	int sarea_priv_offset;
-	unsigned int ring_start;
-	unsigned int ring_end;
-	unsigned int ring_size;
-	unsigned int front_offset;
-	unsigned int back_offset;
-	unsigned int depth_offset;
-	unsigned int w;
-	unsigned int h;
-	unsigned int pitch;
-	unsigned int pitch_bits;
-	unsigned int back_pitch;
-	unsigned int depth_pitch;
-	unsigned int cpp;
-} drm_i830_init_t;
-
-/* Warning: If you change the SAREA structure you must change the Xserver
- * structure as well */
-
-typedef struct _drm_i830_tex_region {
-	unsigned char next, prev;	/* indices to form a circular LRU  */
-	unsigned char in_use;	/* owned by a client, or free? */
-	int age;		/* tracked by clients to update local LRU's */
-} drm_i830_tex_region_t;
-
-typedef struct _drm_i830_sarea {
-	unsigned int ContextState[I830_CTX_SETUP_SIZE];
-	unsigned int BufferState[I830_DEST_SETUP_SIZE];
-	unsigned int TexState[I830_TEXTURE_COUNT][I830_TEX_SETUP_SIZE];
-	unsigned int TexBlendState[I830_TEXBLEND_COUNT][I830_TEXBLEND_SIZE];
-	unsigned int TexBlendStateWordsUsed[I830_TEXBLEND_COUNT];
-	unsigned int Palette[2][256];
-	unsigned int dirty;
-
-	unsigned int nbox;
-	struct drm_clip_rect boxes[I830_NR_SAREA_CLIPRECTS];
-
-	/* Maintain an LRU of contiguous regions of texture space.  If
-	 * you think you own a region of texture memory, and it has an
-	 * age different to the one you set, then you are mistaken and
-	 * it has been stolen by another client.  If global texAge
-	 * hasn't changed, there is no need to walk the list.
-	 *
-	 * These regions can be used as a proxy for the fine-grained
-	 * texture information of other clients - by maintaining them
-	 * in the same lru which is used to age their own textures,
-	 * clients have an approximate lru for the whole of global
-	 * texture space, and can make informed decisions as to which
-	 * areas to kick out.  There is no need to choose whether to
-	 * kick out your own texture or someone else's - simply eject
-	 * them all in LRU order.
-	 */
-
-	drm_i830_tex_region_t texList[I830_NR_TEX_REGIONS + 1];
-	/* Last elt is sentinal */
-	int texAge;		/* last time texture was uploaded */
-	int last_enqueue;	/* last time a buffer was enqueued */
-	int last_dispatch;	/* age of the most recently dispatched buffer */
-	int last_quiescent;	/*  */
-	int ctxOwner;		/* last context to upload state */
-
-	int vertex_prim;
-
-	int pf_enabled;		/* is pageflipping allowed? */
-	int pf_active;
-	int pf_current_page;	/* which buffer is being displayed? */
-
-	int perf_boxes;		/* performance boxes to be displayed */
-
-	/* Here's the state for texunits 2,3:
-	 */
-	unsigned int TexState2[I830_TEX_SETUP_SIZE];
-	unsigned int TexBlendState2[I830_TEXBLEND_SIZE];
-	unsigned int TexBlendStateWordsUsed2;
-
-	unsigned int TexState3[I830_TEX_SETUP_SIZE];
-	unsigned int TexBlendState3[I830_TEXBLEND_SIZE];
-	unsigned int TexBlendStateWordsUsed3;
-
-	unsigned int StippleState[I830_STP_SETUP_SIZE];
-} drm_i830_sarea_t;
-
-/* Flags for perf_boxes
- */
-#define I830_BOX_RING_EMPTY    0x1	/* populated by kernel */
-#define I830_BOX_FLIP          0x2	/* populated by kernel */
-#define I830_BOX_WAIT          0x4	/* populated by kernel & client */
-#define I830_BOX_TEXTURE_LOAD  0x8	/* populated by kernel */
-#define I830_BOX_LOST_CONTEXT  0x10	/* populated by client */
-
-/* I830 specific ioctls
- * The device specific ioctl range is 0x40 to 0x79.
- */
-#define DRM_I830_INIT	0x00
-#define DRM_I830_VERTEX	0x01
-#define DRM_I830_CLEAR	0x02
-#define DRM_I830_FLUSH	0x03
-#define DRM_I830_GETAGE	0x04
-#define DRM_I830_GETBUF	0x05
-#define DRM_I830_SWAP	0x06
-#define DRM_I830_COPY	0x07
-#define DRM_I830_DOCOPY	0x08
-#define DRM_I830_FLIP	0x09
-#define DRM_I830_IRQ_EMIT	0x0a
-#define DRM_I830_IRQ_WAIT	0x0b
-#define DRM_I830_GETPARAM	0x0c
-#define DRM_I830_SETPARAM	0x0d
-
-#define DRM_IOCTL_I830_INIT		DRM_IOW( DRM_COMMAND_BASE + DRM_IOCTL_I830_INIT, drm_i830_init_t)
-#define DRM_IOCTL_I830_VERTEX		DRM_IOW( DRM_COMMAND_BASE + DRM_IOCTL_I830_VERTEX, drm_i830_vertex_t)
-#define DRM_IOCTL_I830_CLEAR		DRM_IOW( DRM_COMMAND_BASE + DRM_IOCTL_I830_CLEAR, drm_i830_clear_t)
-#define DRM_IOCTL_I830_FLUSH		DRM_IO ( DRM_COMMAND_BASE + DRM_IOCTL_I830_FLUSH)
-#define DRM_IOCTL_I830_GETAGE		DRM_IO ( DRM_COMMAND_BASE + DRM_IOCTL_I830_GETAGE)
-#define DRM_IOCTL_I830_GETBUF		DRM_IOWR(DRM_COMMAND_BASE + DRM_IOCTL_I830_GETBUF, drm_i830_dma_t)
-#define DRM_IOCTL_I830_SWAP		DRM_IO ( DRM_COMMAND_BASE + DRM_IOCTL_I830_SWAP)
-#define DRM_IOCTL_I830_COPY		DRM_IOW( DRM_COMMAND_BASE + DRM_IOCTL_I830_COPY, drm_i830_copy_t)
-#define DRM_IOCTL_I830_DOCOPY		DRM_IO ( DRM_COMMAND_BASE + DRM_IOCTL_I830_DOCOPY)
-#define DRM_IOCTL_I830_FLIP		DRM_IO ( DRM_COMMAND_BASE + DRM_IOCTL_I830_FLIP)
-#define DRM_IOCTL_I830_IRQ_EMIT         DRM_IOWR(DRM_COMMAND_BASE + DRM_IOCTL_I830_IRQ_EMIT, drm_i830_irq_emit_t)
-#define DRM_IOCTL_I830_IRQ_WAIT         DRM_IOW( DRM_COMMAND_BASE + DRM_IOCTL_I830_IRQ_WAIT, drm_i830_irq_wait_t)
-#define DRM_IOCTL_I830_GETPARAM         DRM_IOWR(DRM_COMMAND_BASE + DRM_IOCTL_I830_GETPARAM, drm_i830_getparam_t)
-#define DRM_IOCTL_I830_SETPARAM         DRM_IOWR(DRM_COMMAND_BASE + DRM_IOCTL_I830_SETPARAM, drm_i830_setparam_t)
-
-typedef struct _drm_i830_clear {
-	int clear_color;
-	int clear_depth;
-	int flags;
-	unsigned int clear_colormask;
-	unsigned int clear_depthmask;
-} drm_i830_clear_t;
-
-/* These may be placeholders if we have more cliprects than
- * I830_NR_SAREA_CLIPRECTS.  In that case, the client sets discard to
- * false, indicating that the buffer will be dispatched again with a
- * new set of cliprects.
- */
-typedef struct _drm_i830_vertex {
-	int idx;		/* buffer index */
-	int used;		/* nr bytes in use */
-	int discard;		/* client is finished with the buffer? */
-} drm_i830_vertex_t;
-
-typedef struct _drm_i830_copy_t {
-	int idx;		/* buffer index */
-	int used;		/* nr bytes in use */
-	void *address;	/* Address to copy from */
-} drm_i830_copy_t;
-
-typedef struct drm_i830_dma {
-	void *virtual;
-	int request_idx;
-	int request_size;
-	int granted;
-} drm_i830_dma_t;
-
-/* 1.3: Userspace can request & wait on irq's:
- */
-typedef struct drm_i830_irq_emit {
-	int *irq_seq;
-} drm_i830_irq_emit_t;
-
-typedef struct drm_i830_irq_wait {
-	int irq_seq;
-} drm_i830_irq_wait_t;
-
-/* 1.3: New ioctl to query kernel params:
- */
-#define I830_PARAM_IRQ_ACTIVE            1
-
-typedef struct drm_i830_getparam {
-	int param;
-	int *value;
-} drm_i830_getparam_t;
-
-/* 1.3: New ioctl to set kernel params:
- */
-#define I830_SETPARAM_USE_MI_BATCHBUFFER_START            1
-
-typedef struct drm_i830_setparam {
-	int param;
-	int value;
-} drm_i830_setparam_t;
-
-#endif				/* _I830_DRM_H_ */