diff options
Diffstat (limited to 'readline/INSTALL')
| -rw-r--r-- | readline/INSTALL | 283 |
1 files changed, 190 insertions, 93 deletions
diff --git a/readline/INSTALL b/readline/INSTALL index 95d84c820fb..adb27a9f222 100644 --- a/readline/INSTALL +++ b/readline/INSTALL @@ -1,73 +1,81 @@ Basic Installation ================== - These are generic installation instructions. - - The `configure' shell script attempts to guess correct values for -various system-dependent variables used during compilation. It uses -those values to create a `Makefile' in each directory of the package. -It may also create one or more `.h' files containing system-dependent -definitions. Finally, it creates a shell script `config.status' that -you can run in the future to recreate the current configuration, a file -`config.cache' that saves the results of its tests to speed up -reconfiguring, and a file `config.log' containing compiler output -(useful mainly for debugging `configure'). - - If you need to do unusual things to compile the package, please try -to figure out how `configure' could check whether to do them, and mail -diffs or instructions to the address given in the `README' so they can -be considered for the next release. If at some point `config.cache' -contains results you don't want to keep, you may remove or edit it. - - The file `configure.in' is used to create `configure' by a program -called `autoconf'. You only need `configure.in' if you want to change -it or regenerate `configure' using a newer version of `autoconf'. - -The simplest way to compile this package is: - - 1. `cd' to the directory containing the package's source code and type - `./configure' to configure the package for your system. If you're +These are installation instructions for Readline-4.3. + +The simplest way to compile readline is: + + 1. `cd' to the directory containing the readline source code and type + `./configure' to configure readline for your system. If you're using `csh' on an old version of System V, you might need to type `sh ./configure' instead to prevent `csh' from trying to execute `configure' itself. - Running `configure' takes awhile. While running, it prints some + Running `configure' takes some time. While running, it prints some messages telling which features it is checking for. - 2. Type `make' to compile the package. - - 3. Optionally, type `make check' to run any self-tests that come with - the package. + 2. Type `make' to compile readline and build the static readline + and history libraries. If supported, the shared readline and history + libraries will be built also. See below for instructions on compiling + the other parts of the distribution. Typing `make everything' will + cause the static and shared libraries (if supported) and the example + programs to be built. - 4. Type `make install' to install the programs and any data files and - documentation. + 3. Type `make install' to install the static readline and history + libraries, the readline include files, the documentation, and, if + supported, the shared readline and history libraries. - 5. You can remove the program binaries and object files from the - source code directory by typing `make clean'. To also remove the - files that `configure' created (so you can compile the package for + 4. You can remove the created libraries and object files from the + build directory by typing `make clean'. To also remove the + files that `configure' created (so you can compile readline for a different kind of computer), type `make distclean'. There is also a `make maintainer-clean' target, but that is intended mainly - for the package's developers. If you use it, you may have to get - all sorts of other programs in order to regenerate files that came - with the distribution. + for the readline developers, and should be used with care. + +The `configure' shell script attempts to guess correct values for +various system-dependent variables used during compilation. It +uses those values to create a `Makefile' in the build directory, +and Makefiles in the `doc', `shlib', and `examples' +subdirectories. It also creates a `config.h' file containing +system-dependent definitions. Finally, it creates a shell script +`config.status' that you can run in the future to recreate the +current configuration, a file `config.cache' that saves the +results of its tests to speed up reconfiguring, and a file +`config.log' containing compiler output (useful mainly for +debugging `configure'). + +If you need to do unusual things to compile readline, please try +to figure out how `configure' could check whether to do them, and +mail diffs or instructions to <bug-readline@gnu.org> so they can +be considered for the next release. If at some point +`config.cache' contains results you don't want to keep, you may +remove or edit it. + +The file `configure.in' is used to create `configure' by a +program called `autoconf'. You only need `configure.in' if you +want to change it or regenerate `configure' using a newer version +of `autoconf'. The readline `configure.in' requires autoconf +version 2.50 or newer. Compilers and Options ===================== - Some systems require unusual options for compilation or linking that +Some systems require unusual options for compilation or linking that the `configure' script does not know about. You can give `configure' initial values for variables by setting them in the environment. Using a Bourne-compatible shell, you can do that on the command line like this: + CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure Or on systems that have the `env' program, you can do it like this: + env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure Compiling For Multiple Architectures ==================================== - You can compile the package for more than one kind of computer at the +You can compile readline for more than one kind of computer at the same time, by placing the object files for each architecture in their own directory. To do this, you must use a version of `make' that supports the `VPATH' variable, such as GNU `make'. `cd' to the @@ -75,80 +83,59 @@ directory where you want the object files and executables to go and run the `configure' script. `configure' automatically checks for the source code in the directory that `configure' is in and in `..'. - If you have to use a `make' that does not supports the `VPATH' -variable, you have to compile the package for one architecture at a time -in the source code directory. After you have installed the package for -one architecture, use `make distclean' before reconfiguring for another -architecture. +If you have to use a `make' that does not supports the `VPATH' +variable, you have to compile readline for one architecture at a +time in the source code directory. After you have installed +readline for one architecture, use `make distclean' before +reconfiguring for another architecture. Installation Names ================== - By default, `make install' will install the package's files in -`/usr/local/bin', `/usr/local/man', etc. You can specify an -installation prefix other than `/usr/local' by giving `configure' the -option `--prefix=PATH'. - - You can specify separate installation prefixes for -architecture-specific files and architecture-independent files. If you -give `configure' the option `--exec-prefix=PATH', the package will use -PATH as the prefix for installing programs and libraries. -Documentation and other data files will still use the regular prefix. - - If the package supports it, you can cause programs to be installed -with an extra prefix or suffix on their names by giving `configure' the -option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. - -Optional Features -================= - - Some packages pay attention to `--enable-FEATURE' options to -`configure', where FEATURE indicates an optional part of the package. -They may also pay attention to `--with-PACKAGE' options, where PACKAGE -is something like `gnu-as' or `x' (for the X Window System). The -`README' should mention any `--enable-' and `--with-' options that the -package recognizes. - - For packages that use the X Window System, `configure' can usually -find the X include and library files automatically, but if it doesn't, -you can use the `configure' options `--x-includes=DIR' and -`--x-libraries=DIR' to specify their locations. +By default, `make install' will install the readline libraries in +`/usr/local/lib', the include files in +`/usr/local/include/readline', the man pages in `/usr/local/man', +and the info files in `/usr/local/info'. You can specify an +installation prefix other than `/usr/local' by giving `configure' +the option `--prefix=PATH' or by supplying a value for the +DESTDIR variable when running `make install'. + +You can specify separate installation prefixes for +architecture-specific files and architecture-independent files. +If you give `configure' the option `--exec-prefix=PATH', the +readline Makefiles will use PATH as the prefix for installing the +libraries. Documentation and other data files will still use the +regular prefix. Specifying the System Type ========================== - There may be some features `configure' can not figure out -automatically, but needs to determine by the type of host the package -will run on. Usually `configure' can figure that out, but if it prints -a message saying it can not guess the host type, give it the -`--host=TYPE' option. TYPE can either be a short name for the system -type, such as `sun4', or a canonical name with three fields: - CPU-COMPANY-SYSTEM - -See the file `config.sub' for the possible values of each field. If -`config.sub' isn't included in this package, then this package doesn't -need to know the host type. +There may be some features `configure' can not figure out +automatically, but need to determine by the type of host readline +will run on. Usually `configure' can figure that out, but if it +prints a message saying it can not guess the host type, give it +the `--host=TYPE' option. TYPE can either be a short name for +the system type, such as `sun4', or a canonical name with three +fields: CPU-COMPANY-SYSTEM (e.g., i386-unknown-freebsd4.2). - If you are building compiler tools for cross-compiling, you can also -use the `--target=TYPE' option to select the type of system they will -produce code for and the `--build=TYPE' option to select the type of -system on which you are compiling the package. +See the file `config.sub' for the possible values of each field. Sharing Defaults ================ - If you want to set default values for `configure' scripts to share, +If you want to set default values for `configure' scripts to share, you can create a site shell script called `config.site' that gives default values for variables like `CC', `cache_file', and `prefix'. `configure' looks for `PREFIX/share/config.site' if it exists, then `PREFIX/etc/config.site' if it exists. Or, you can set the `CONFIG_SITE' environment variable to the location of the site script. -A warning: not all `configure' scripts look for a site script. +A warning: the readline `configure' looks for a site script, but not +all `configure' scripts do. Operation Controls ================== - `configure' recognizes the following options to control how it +`configure' recognizes the following options to control how it operates. `--cache-file=FILE' @@ -174,3 +161,113 @@ operates. `configure' also accepts some other, not widely useful, options. +Optional Features +================= + +The readline `configure' recognizes a single `--with-PACKAGE' option: + +`--with-curses' + This tells readline that it can find the termcap library functions + (tgetent, et al.) in the curses library, rather than a separate + termcap library. Readline uses the termcap functions, but does not + link with the termcap or curses library itself, allowing applications + which link with readline the to choose an appropriate library. + This option tells readline to link the example programs with the + curses library rather than libtermcap. + +`configure' also recognizes two `--enable-FEATURE' options: + +`--enable-shared' + Build the shared libraries by default on supported platforms. The + default is `yes'. + +`--enable-static' + Build the static libraries by default. The default is `yes'. + +Shared Libraries +================ + +There is support for building shared versions of the readline and +history libraries. The configure script creates a Makefile in +the `shlib' subdirectory, and typing `make shared' will cause +shared versions of the readline and history libraries to be built +on supported platforms. + +If `configure' is given the `--enable-shared' option, it will attempt +to build the shared libraries by default on supported platforms. + +Configure calls the script support/shobj-conf to test whether or +not shared library creation is supported and to generate the values +of variables that are substituted into shlib/Makefile. If you +try to build shared libraries on an unsupported platform, `make' +will display a message asking you to update support/shobj-conf for +your platform. + +If you need to update support/shobj-conf, you will need to create +a `stanza' for your operating system and compiler. The script uses +the value of host_os and ${CC} as determined by configure. For +instance, FreeBSD 4.2 with any version of gcc is identified as +`freebsd4.2-gcc*'. + +In the stanza for your operating system-compiler pair, you will need to +define several variables. They are: + +SHOBJ_CC The C compiler used to compile source files into shareable + object files. This is normally set to the value of ${CC} + by configure, and should not need to be changed. + +SHOBJ_CFLAGS Flags to pass to the C compiler ($SHOBJ_CC) to create + position-independent code. If you are using gcc, this + should probably be set to `-fpic'. + +SHOBJ_LD The link editor to be used to create the shared library from + the object files created by $SHOBJ_CC. If you are using + gcc, a value of `gcc' will probably work. + +SHOBJ_LDFLAGS Flags to pass to SHOBJ_LD to enable shared object creation. + If you are using gcc, `-shared' may be all that is necessary. + These should be the flags needed for generic shared object + creation. + +SHLIB_XLDFLAGS Additional flags to pass to SHOBJ_LD for shared library + creation. Many systems use the -R option to the link + editor to embed a path within the library for run-time + library searches. A reasonable value for such systems would + be `-R$(libdir)'. + +SHLIB_LIBS Any additional libraries that shared libraries should be + linked against when they are created. + +SHLIB_LIBSUFF The suffix to add to `libreadline' and `libhistory' when + generating the filename of the shared library. Many systems + use `so'; HP-UX uses `sl'. + +SHLIB_LIBVERSION The string to append to the filename to indicate the version + of the shared library. It should begin with $(SHLIB_LIBSUFF), + and possibly include version information that allows the + run-time loader to load the version of the shared library + appropriate for a particular program. Systems using shared + libraries similar to SunOS 4.x use major and minor library + version numbers; for those systems a value of + `$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)$(SHLIB_MINOR)' is appropriate. + Systems based on System V Release 4 don't use minor version + numbers; use `$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)' on those systems. + Other Unix versions use different schemes. + +SHLIB_STATUS Set this to `supported' when you have defined the other + necessary variables. Make uses this to determine whether + or not shared library creation should be attempted. If + shared libraries are not supported, this will be set to + `unsupported'. + +You should look at the existing stanzas in support/shobj-conf for ideas. + +Once you have updated support/shobj-conf, re-run configure and type +`make shared' or `make'. The shared libraries will be created in the +shlib subdirectory. + +If shared libraries are created, `make install' will install them. +You may install only the shared libraries by running `make +install-shared' from the top-level build directory. Running `make +install' in the shlib subdirectory will also work. If you don't want +to install any created shared libraries, run `make install-static'. |