1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
|
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2017 Marek Behún <kabel@kernel.org>
* Copyright (C) 2016 Tomas Hlavacek <tomas.hlavacek@nic.cz>
*/
#ifndef _CONFIG_TURRIS_OMNIA_H
#define _CONFIG_TURRIS_OMNIA_H
/*
* High Level Configuration Options (easy to change)
*/
/*
* TEXT_BASE needs to be below 16MiB, since this area is scrubbed
* for DDR ECC byte filling in the SPL before loading the main
* U-Boot into it.
*/
/* Environment in SPI NOR flash */
#define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */
/* Keep device tree and initrd in lower memory so the kernel can access them */
#define RELOCATION_LIMITS_ENV_SETTINGS \
"fdt_high=0x10000000\0" \
"initrd_high=0x10000000\0"
/*
* mv-common.h should be defined after CMD configs since it used them
* to enable certain macros
*/
#include "mv-common.h"
/* Include the common distro boot environment */
#ifndef CONFIG_SPL_BUILD
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 0) \
func(NVME, nvme, 0) \
func(SCSI, scsi, 0) \
func(USB, usb, 0) \
func(PXE, pxe, na) \
func(DHCP, dhcp, na)
#define KERNEL_ADDR_R __stringify(0x1000000)
#define FDT_ADDR_R __stringify(0x2000000)
#define RAMDISK_ADDR_R __stringify(0x2200000)
#define SCRIPT_ADDR_R __stringify(0x1800000)
#define PXEFILE_ADDR_R __stringify(0x1900000)
#define LOAD_ADDRESS_ENV_SETTINGS \
"kernel_addr_r=" KERNEL_ADDR_R "\0" \
"fdt_addr_r=" FDT_ADDR_R "\0" \
"ramdisk_addr_r=" RAMDISK_ADDR_R "\0" \
"scriptaddr=" SCRIPT_ADDR_R "\0" \
"pxefile_addr_r=" PXEFILE_ADDR_R "\0"
#include <config_distro_bootcmd.h>
/*
* The factory reset bootcommand on Omnia first sets all the front LEDs to green
* and then tries to load the rescue image from SPI flash memory and boot it
*/
#define TURRIS_OMNIA_BOOTCMD_RESCUE \
"i2c dev 2; " \
"i2c mw 0x2a.1 0x3 0x1c 1; " \
"i2c mw 0x2a.1 0x4 0x1c 1; " \
"mw.l 0x01000000 0x00ff000c; " \
"i2c write 0x01000000 0x2a.1 0x5 4 -s; " \
"setenv bootargs \"earlyprintk console=ttyS0,115200" \
" omniarescue=$omnia_reset rescue_mode=$omnia_reset\"; " \
"sf probe; " \
"sf read 0x1000000 0x100000 0x700000; " \
"lzmadec 0x1000000 0x1700000; " \
"if gpio input gpio@71_4; then " \
"bootm 0x1700000#sfp; " \
"else " \
"bootm 0x1700000; " \
"fi; " \
"bootz 0x1000000"
#define CONFIG_EXTRA_ENV_SETTINGS \
RELOCATION_LIMITS_ENV_SETTINGS \
LOAD_ADDRESS_ENV_SETTINGS \
"fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
"console=ttyS0,115200\0" \
"bootcmd_rescue=" TURRIS_OMNIA_BOOTCMD_RESCUE "\0" \
BOOTENV
#endif /* CONFIG_SPL_BUILD */
#endif /* _CONFIG_TURRIS_OMNIA_H */
|
