1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
|
/*
* (C) Copyright 2012
* Henrik Nordstrom <henrik@henriknordstrom.net>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <i2c.h>
#include <asm/arch/gpio.h>
#include <axp209.h>
enum axp209_reg {
AXP209_POWER_STATUS = 0x00,
AXP209_CHIP_VERSION = 0x03,
AXP209_DCDC2_VOLTAGE = 0x23,
AXP209_DCDC3_VOLTAGE = 0x27,
AXP209_LDO24_VOLTAGE = 0x28,
AXP209_LDO3_VOLTAGE = 0x29,
AXP209_IRQ_ENABLE1 = 0x40,
AXP209_IRQ_ENABLE2 = 0x41,
AXP209_IRQ_ENABLE3 = 0x42,
AXP209_IRQ_ENABLE4 = 0x43,
AXP209_IRQ_ENABLE5 = 0x44,
AXP209_IRQ_STATUS5 = 0x4c,
AXP209_SHUTDOWN = 0x32,
AXP209_GPIO0_CTRL = 0x90,
AXP209_GPIO1_CTRL = 0x92,
AXP209_GPIO2_CTRL = 0x93,
AXP209_GPIO_STATE = 0x94,
AXP209_GPIO3_CTRL = 0x95,
};
#define AXP209_POWER_STATUS_ON_BY_DC (1 << 0)
#define AXP209_POWER_STATUS_VBUS_USABLE (1 << 4)
#define AXP209_IRQ5_PEK_UP (1 << 6)
#define AXP209_IRQ5_PEK_DOWN (1 << 5)
#define AXP209_POWEROFF (1 << 7)
#define AXP209_GPIO_OUTPUT_LOW 0x00 /* Drive pin low */
#define AXP209_GPIO_OUTPUT_HIGH 0x01 /* Drive pin high */
#define AXP209_GPIO_INPUT 0x02 /* Float pin */
/* GPIO3 is different from the others */
#define AXP209_GPIO3_OUTPUT_LOW 0x00 /* Drive pin low, Output mode */
#define AXP209_GPIO3_OUTPUT_HIGH 0x02 /* Float pin, Output mode */
#define AXP209_GPIO3_INPUT 0x06 /* Float pin, Input mode */
static int axp209_write(enum axp209_reg reg, u8 val)
{
return i2c_write(0x34, reg, 1, &val, 1);
}
static int axp209_read(enum axp209_reg reg, u8 *val)
{
return i2c_read(0x34, reg, 1, val, 1);
}
static u8 axp209_mvolt_to_cfg(int mvolt, int min, int max, int div)
{
if (mvolt < min)
mvolt = min;
else if (mvolt > max)
mvolt = max;
return (mvolt - min) / div;
}
int axp209_set_dcdc2(int mvolt)
{
int rc;
u8 cfg, current;
cfg = axp209_mvolt_to_cfg(mvolt, 700, 2275, 25);
/* Do we really need to be this gentle? It has built-in voltage slope */
while ((rc = axp209_read(AXP209_DCDC2_VOLTAGE, ¤t)) == 0 &&
current != cfg) {
if (current < cfg)
current++;
else
current--;
rc = axp209_write(AXP209_DCDC2_VOLTAGE, current);
if (rc)
break;
}
return rc;
}
int axp209_set_dcdc3(int mvolt)
{
u8 cfg = axp209_mvolt_to_cfg(mvolt, 700, 3500, 25);
return axp209_write(AXP209_DCDC3_VOLTAGE, cfg);
}
int axp209_set_ldo2(int mvolt)
{
int rc;
u8 cfg, reg;
cfg = axp209_mvolt_to_cfg(mvolt, 1800, 3300, 100);
rc = axp209_read(AXP209_LDO24_VOLTAGE, ®);
if (rc)
return rc;
/* LDO2 configuration is in upper 4 bits */
reg = (reg & 0x0f) | (cfg << 4);
return axp209_write(AXP209_LDO24_VOLTAGE, reg);
}
int axp209_set_ldo3(int mvolt)
{
u8 cfg;
if (mvolt == -1)
cfg = 0x80; /* determined by LDO3IN pin */
else
cfg = axp209_mvolt_to_cfg(mvolt, 700, 3500, 25);
return axp209_write(AXP209_LDO3_VOLTAGE, cfg);
}
int axp209_set_ldo4(int mvolt)
{
int rc;
static const int vindex[] = {
1250, 1300, 1400, 1500, 1600, 1700, 1800, 1900, 2000, 2500,
2700, 2800, 3000, 3100, 3200, 3300
};
u8 cfg, reg;
/* Translate mvolt to register cfg value, requested <= selected */
for (cfg = 15; vindex[cfg] > mvolt && cfg > 0; cfg--);
rc = axp209_read(AXP209_LDO24_VOLTAGE, ®);
if (rc)
return rc;
/* LDO4 configuration is in lower 4 bits */
reg = (reg & 0xf0) | (cfg << 0);
return axp209_write(AXP209_LDO24_VOLTAGE, reg);
}
int axp209_init(void)
{
u8 ver;
int i, rc;
rc = axp209_read(AXP209_CHIP_VERSION, &ver);
if (rc)
return rc;
/* Low 4 bits is chip version */
ver &= 0x0f;
if (ver != 0x1)
return -1;
/* Mask all interrupts */
for (i = AXP209_IRQ_ENABLE1; i <= AXP209_IRQ_ENABLE5; i++) {
rc = axp209_write(i, 0);
if (rc)
return rc;
}
return 0;
}
int axp209_poweron_by_dc(void)
{
u8 v;
if (axp209_read(AXP209_POWER_STATUS, &v))
return 0;
return (v & AXP209_POWER_STATUS_ON_BY_DC);
}
int axp209_power_button(void)
{
u8 v;
if (axp209_read(AXP209_IRQ_STATUS5, &v))
return 0;
axp209_write(AXP209_IRQ_STATUS5, AXP209_IRQ5_PEK_DOWN);
return v & AXP209_IRQ5_PEK_DOWN;
}
static u8 axp209_get_gpio_ctrl_reg(unsigned int pin)
{
switch (pin) {
case 0: return AXP209_GPIO0_CTRL;
case 1: return AXP209_GPIO1_CTRL;
case 2: return AXP209_GPIO2_CTRL;
case 3: return AXP209_GPIO3_CTRL;
}
return 0;
}
int axp_gpio_direction_input(unsigned int pin)
{
if (pin == SUNXI_GPIO_AXP0_VBUS_DETECT)
return 0;
u8 reg = axp209_get_gpio_ctrl_reg(pin);
/* GPIO3 is "special" */
u8 val = (pin == 3) ? AXP209_GPIO3_INPUT : AXP209_GPIO_INPUT;
return axp209_write(reg, val);
}
int axp_gpio_direction_output(unsigned int pin, unsigned int val)
{
u8 reg = axp209_get_gpio_ctrl_reg(pin);
if (val) {
val = (pin == 3) ? AXP209_GPIO3_OUTPUT_HIGH :
AXP209_GPIO_OUTPUT_HIGH;
} else {
val = (pin == 3) ? AXP209_GPIO3_OUTPUT_LOW :
AXP209_GPIO_OUTPUT_LOW;
}
return axp209_write(reg, val);
}
int axp_gpio_get_value(unsigned int pin)
{
u8 val, mask;
int rc;
if (pin == SUNXI_GPIO_AXP0_VBUS_DETECT) {
rc = axp209_read(AXP209_POWER_STATUS, &val);
mask = AXP209_POWER_STATUS_VBUS_USABLE;
} else if (pin == 3) {
rc = axp209_read(AXP209_GPIO3_CTRL, &val);
mask = 1;
} else {
rc = axp209_read(AXP209_GPIO_STATE, &val);
mask = 1 << (pin + 4);
}
if (rc)
return rc;
return (val & mask) ? 1 : 0;
}
int axp_gpio_set_value(unsigned int pin, unsigned int val)
{
return axp_gpio_direction_output(pin, val);
}
|
