blob: c25ba5a5b3fc01130998fb652670094051aee72a (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
|
/*
* AU1X00 UART support
*
* Hardcoded to UART 0 for now
* Speed and options also hardcoded to 115200 8N1
*
* Copyright (c) 2003 Thomas.Lange@corelatus.se
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <config.h>
#include <common.h>
#include <asm/au1x00.h>
/******************************************************************************
*
* serial_init - initialize a channel
*
* This routine initializes the number of data bits, parity
* and set the selected baud rate. Interrupts are disabled.
* Set the modem control signals if the option is selected.
*
* RETURNS: N/A
*/
int serial_init (void)
{
volatile u32 *uart_fifoctl = (volatile u32*)(UART0_ADDR+UART_FCR);
volatile u32 *uart_enable = (volatile u32*)(UART0_ADDR+UART_ENABLE);
/* Enable clocks first */
*uart_enable = UART_EN_CE;
/* Then release reset */
/* Must release reset before setting other regs */
*uart_enable = UART_EN_CE|UART_EN_E;
/* Activate fifos, reset tx and rx */
/* Set tx trigger level to 12 */
*uart_fifoctl = UART_FCR_ENABLE_FIFO|UART_FCR_CLEAR_RCVR|
UART_FCR_CLEAR_XMIT|UART_FCR_T_TRIGGER_12;
serial_setbrg();
return 0;
}
void serial_setbrg (void)
{
volatile u32 *uart_clk = (volatile u32*)(UART0_ADDR+UART_CLK);
volatile u32 *uart_lcr = (volatile u32*)(UART0_ADDR+UART_LCR);
volatile u32 *sys_powerctrl = (u32 *)SYS_POWERCTRL;
int sd;
int divisorx2;
/* sd is system clock divisor */
/* see section 10.4.5 in au1550 datasheet */
sd = (*sys_powerctrl & 0x03) + 2;
/* calulate 2x baudrate and round */
divisorx2 = ((CONFIG_SYS_MIPS_TIMER_FREQ/(sd * 16 * CONFIG_BAUDRATE)));
if (divisorx2 & 0x01)
divisorx2 = divisorx2 + 1;
*uart_clk = divisorx2 / 2;
/* Set parity, stop bits and word length to 8N1 */
*uart_lcr = UART_LCR_WLEN8;
}
void serial_putc (const char c)
{
volatile u32 *uart_lsr = (volatile u32*)(UART0_ADDR+UART_LSR);
volatile u32 *uart_tx = (volatile u32*)(UART0_ADDR+UART_TX);
if (c == '\n') serial_putc ('\r');
/* Wait for fifo to shift out some bytes */
while((*uart_lsr&UART_LSR_THRE)==0);
*uart_tx = (u32)c;
}
void serial_puts (const char *s)
{
while (*s)
{
serial_putc (*s++);
}
}
int serial_getc (void)
{
volatile u32 *uart_rx = (volatile u32*)(UART0_ADDR+UART_RX);
char c;
while (!serial_tstc());
c = (*uart_rx&0xFF);
return c;
}
int serial_tstc (void)
{
volatile u32 *uart_lsr = (volatile u32*)(UART0_ADDR+UART_LSR);
if(*uart_lsr&UART_LSR_DR){
/* Data in rfifo */
return(1);
}
return 0;
}
|
