summaryrefslogtreecommitdiff
path: root/arch/arm/dts/imx93-11x11-evk.dts
blob: 4322cc3e11b8692f3ff02c62fab5b756d9139a40 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
 * Copyright 2022 NXP
 */

/dts-v1/;

#include "imx93.dtsi"

/ {
	model = "NXP i.MX93 11X11 EVK board";
	compatible = "fsl,imx93-11x11-evk", "fsl,imx93";

	chosen {
		stdout-path = &lpuart1;
	};

	reg_vref_1v8: regulator-adc-vref {
		compatible = "regulator-fixed";
		regulator-name = "vref_1v8";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
	};

	reg_usdhc2_vmmc: regulator-usdhc2 {
		compatible = "regulator-fixed";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
		regulator-name = "VSD_3V3";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
		enable-active-high;
	};
};

&adc1 {
	vref-supply = <&reg_vref_1v8>;
	status = "okay";
};

&mu1 {
	status = "okay";
};

&mu2 {
	status = "okay";
};

&eqos {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_eqos>;
	phy-mode = "rgmii-id";
	phy-handle = <&ethphy1>;
	status = "okay";

	mdio {
		compatible = "snps,dwmac-mdio";
		#address-cells = <1>;
		#size-cells = <0>;
		clock-frequency = <5000000>;

		ethphy1: ethernet-phy@1 {
			reg = <1>;
			eee-broken-1000t;
		};
	};
};

&fec {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_fec>;
	phy-mode = "rgmii-id";
	phy-handle = <&ethphy2>;
	fsl,magic-packet;
	status = "okay";

	mdio {
		#address-cells = <1>;
		#size-cells = <0>;
		clock-frequency = <5000000>;

		ethphy2: ethernet-phy@2 {
			reg = <2>;
			eee-broken-1000t;
		};
	};
};

&lpi2c2 {
	#address-cells = <1>;
	#size-cells = <0>;
	clock-frequency = <400000>;
	pinctrl-names = "default", "sleep";
	pinctrl-0 = <&pinctrl_lpi2c2>;
	pinctrl-1 = <&pinctrl_lpi2c2>;
	status = "okay";

	pmic@25 {
		compatible = "nxp,pca9451a";
		reg = <0x25>;
		interrupt-parent = <&pcal6524>;
		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;

		regulators {
			buck1: BUCK1 {
				regulator-name = "BUCK1";
				regulator-min-microvolt = <650000>;
				regulator-max-microvolt = <2237500>;
				regulator-boot-on;
				regulator-always-on;
				regulator-ramp-delay = <3125>;
			};

			buck2: BUCK2 {
				regulator-name = "BUCK2";
				regulator-min-microvolt = <600000>;
				regulator-max-microvolt = <2187500>;
				regulator-boot-on;
				regulator-always-on;
				regulator-ramp-delay = <3125>;
			};

			buck4: BUCK4{
				regulator-name = "BUCK4";
				regulator-min-microvolt = <600000>;
				regulator-max-microvolt = <3400000>;
				regulator-boot-on;
				regulator-always-on;
			};

			buck5: BUCK5{
				regulator-name = "BUCK5";
				regulator-min-microvolt = <600000>;
				regulator-max-microvolt = <3400000>;
				regulator-boot-on;
				regulator-always-on;
			};

			buck6: BUCK6 {
				regulator-name = "BUCK6";
				regulator-min-microvolt = <600000>;
				regulator-max-microvolt = <3400000>;
				regulator-boot-on;
				regulator-always-on;
			};

			ldo1: LDO1 {
				regulator-name = "LDO1";
				regulator-min-microvolt = <1600000>;
				regulator-max-microvolt = <3300000>;
				regulator-boot-on;
				regulator-always-on;
			};

			ldo4: LDO4 {
				regulator-name = "LDO4";
				regulator-min-microvolt = <800000>;
				regulator-max-microvolt = <3300000>;
				regulator-boot-on;
				regulator-always-on;
			};

			ldo5: LDO5 {
				regulator-name = "LDO5";
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <3300000>;
				regulator-boot-on;
				regulator-always-on;
			};
		};
	};

	pcal6524: gpio@22 {
		compatible = "nxp,pcal6524";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_pcal6524>;
		reg = <0x22>;
		gpio-controller;
		#gpio-cells = <2>;
		interrupt-controller;
		#interrupt-cells = <2>;
		interrupt-parent = <&gpio3>;
		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
	};

	adp5585gpio: gpio@34 {
		compatible = "adp5585";
		reg = <0x34>;
		gpio-controller;
		#gpio-cells = <2>;
	};
};

&lpuart1 { /* console */
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart1>;
	status = "okay";
};

&usdhc1 {
	pinctrl-names = "default", "state_100mhz", "state_200mhz";
	pinctrl-0 = <&pinctrl_usdhc1>;
	pinctrl-1 = <&pinctrl_usdhc1>;
	pinctrl-2 = <&pinctrl_usdhc1>;
	bus-width = <8>;
	non-removable;
	status = "okay";
};

&usdhc2 {
	pinctrl-names = "default", "state_100mhz", "state_200mhz";
	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
	pinctrl-1 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
	pinctrl-2 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
	cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>;
	vmmc-supply = <&reg_usdhc2_vmmc>;
	bus-width = <4>;
	status = "okay";
	no-sdio;
	no-mmc;
};

&iomuxc {
	pinctrl_lpi2c2: lpi2c2grp {
		fsl,pins = <
			MX93_PAD_I2C2_SCL__LPI2C2_SCL			0x40000b9e
			MX93_PAD_I2C2_SDA__LPI2C2_SDA			0x40000b9e
		>;
	};

	pinctrl_pcal6524: pcal6524grp {
		fsl,pins = <
			MX93_PAD_CCM_CLKO2__GPIO3_IO27			0x31e
		>;
	};

	pinctrl_eqos: eqosgrp {
		fsl,pins = <
			MX93_PAD_ENET1_MDC__ENET_QOS_MDC			0x57e
			MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO			0x57e
			MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0			0x57e
			MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1			0x57e
			MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2			0x57e
			MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3			0x57e
			MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x5fe
			MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL		0x57e
			MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0			0x57e
			MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1			0x57e
			MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2			0x57e
			MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3			0x57e
			MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x5fe
			MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL		0x57e
		>;
	};

	pinctrl_fec: fecgrp {
		fsl,pins = <
			MX93_PAD_ENET2_MDC__ENET1_MDC			0x57e
			MX93_PAD_ENET2_MDIO__ENET1_MDIO			0x57e
			MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0		0x57e
			MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1		0x57e
			MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2		0x57e
			MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3		0x57e
			MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC		0x5fe
			MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL	0x57e
			MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0		0x57e
			MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1		0x57e
			MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2		0x57e
			MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3		0x57e
			MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC		0x5fe
			MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL	0x57e
		>;
	};

	pinctrl_uart1: uart1grp {
		fsl,pins = <
			MX93_PAD_UART1_RXD__LPUART1_RX			0x31e
			MX93_PAD_UART1_TXD__LPUART1_TX			0x31e
		>;
	};

	pinctrl_usdhc1: usdhc1grp {
		fsl,pins = <
			MX93_PAD_SD1_CLK__USDHC1_CLK		0x15fe
			MX93_PAD_SD1_CMD__USDHC1_CMD		0x13fe
			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x13fe
			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x13fe
			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x13fe
			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x13fe
			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x13fe
			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x13fe
			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x13fe
			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x13fe
			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x15fe
		>;
	};

	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
		fsl,pins = <
			MX93_PAD_SD2_RESET_B__GPIO3_IO07	0x31e
		>;
	};

	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
		fsl,pins = <
			MX93_PAD_SD2_CD_B__GPIO3_IO00		0x31e
		>;
	};

	pinctrl_usdhc2: usdhc2grp {
		fsl,pins = <
			MX93_PAD_SD2_CLK__USDHC2_CLK		0x15fe
			MX93_PAD_SD2_CMD__USDHC2_CMD		0x13fe
			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x13fe
			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x13fe
			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x13fe
			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x13fe
			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
		>;
	};
};