summaryrefslogtreecommitdiff
path: root/include/power
AgeCommit message (Collapse)AuthorFilesLines
2020-03-24ram: stm32mp1: increase vdd2_ddr: buck2 for 32bits LPDDRPatrick Delaunay1-0/+1
Need to increase the LPDDR2/LPDDR3 the voltage vdd2_ddr: buck2 form 1.2V to 1.25V for 32bits configuration. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Acked-by: Patrice Chotard <patrice.chotard@st.com>
2020-01-27power: regulator: add driver for Dialog DA9063 PMICMartin Fuzzey1-0/+12
Add a driver for the regulators in the the DA9063 PMIC. Robert Beckett: move regulator modes to header so board code can set modes. Correct mode mask used in ldo_set_mode. Add an option CONFIG_SPL_DM_REGULATOR_DA9063. Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group> Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
2020-01-27power: pmic: add driver for Dialog DA9063 PMICMartin Fuzzey1-0/+308
This adds the basic register access operations and child regulator binding (if a regulator driver exists). Robert Beckett: simplify accesses by using bottom bit of address as offset overflow. This avoids the need to track which page we are on. Add an option CONFIG_SPL_DM_PMIC_DA9063. Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group> Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
2020-01-08Merge tag 'u-boot-imx-20200108' of ↵Tom Rini1-0/+60
https://gitlab.denx.de/u-boot/custodians/u-boot-imx --------------------------------------------------------------------- Add i.MX8MP SoC and EVK board Update README for i.MX8MN EVK and fix mmc env Add pca9450 driver -------------------------------------------------------------------- Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/634211885
2020-01-08power: Add new PMIC PCA9450 driverYe Li1-0/+60
PCA9450 PMIC series is used to support iMX8MM (PCA9450A) and iMX8MN (PCA9450B). Add the PMIC driver for both PCA9450A and PCA9450B. Signed-off-by: Robin Gong <yibin.gong@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-12-15x86: power: Add an ACPI PMC uclassSimon Glass1-0/+185
Intel x86 SoCs have a power manager/controller which handles several power-related aspects of the platform. Add a uclass for this, with a few useful operations. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-11-23power: fan53555: add support for Silergy SYR82X and SYR83XVasily Khoruzhick1-0/+14
SYR82X and SYR83X are almost identical to FAN53555, the only difference is different die ID and revision, voltage ranges and steps. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Tested-by: Anand Moon <linux.amoon@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-11Merge tag 'u-boot-rockchip-20191110' of ↵Tom Rini2-0/+105
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - Add support for rockchip pmic rk805,rk809, rk816, rk817 - Add rk3399 board Leez support - Fix bug in rk3328 ram driver - Adapt SPL to support ATF bl31 with entry at 0x40000 - Fix the u8 type comparision with '-1'. - Fix checkpatch warning for multi blank line and review signature.
2019-11-10power: pmic: rk809: support rk809 pmicJoseph Chen1-0/+1
The RK809 is a Power Management IC (PMIC) for multimedia and handheld devices. They contains the following components: - Regulators(5*BUCKs, 9*LDOs, 2*SWITCHes) - RTC - Clocking Signed-off-by: Joseph Chen <chenjh@rock-chips.com> Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-10power: pmic: rk817: support rk817 pmicJoseph Chen1-0/+31
The RK817 is a Power Management IC (PMIC) for multimedia and handheld devices. They contains the following components: - Regulators(4*BUCKs, 1* BOOST, 9*LDOs, 1*SWITCH) - RTC - Clocking Signed-off-by: Joseph Chen <chenjh@rock-chips.com> Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-10power: pmic: rk805: support rk805 pmicElaine Zhang1-0/+1
The RK805 are a Power Management IC (PMIC) for multimedia and handheld devices. They contains the following components: - Regulators(4*BUCKs, 3*LDOs) - RTC - Clocking Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-10power: pmic: rk816: support rk816 pmicElaine Zhang1-1/+10
The RK816 is a Power Management IC (PMIC) for multimedia and handheld devices. They contains the following components: - Regulators(4*BUCKs, 1*BOOST, 6*LDOs, 1*SWITCH) - RTC - Clocking Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-10dm: regulator: support regulator more stateJoseph Chen1-0/+63
support parse regulator standard property: regulator-off-in-suspend; regulator-init-microvolt; regulator-suspend-microvolt: regulator_get_suspend_enable regulator_set_suspend_enable regulator_get_suspend_value regulator_set_suspend_value Signed-off-by: Joseph Chen <chenjh@rock-chips.com> Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-07power: pmic: tps65941: Add support for tps65941 family of PMICsKeerthy1-0/+26
Add support to bind the regulators/child nodes with the pmic. Signed-off-by: Keerthy <j-keerthy@ti.com>
2019-08-27pmu: stpmic1: change specific NVM api to MISCPatrick Delaunay1-7/+0
Use MISC u-class to export the NVM register (starting at 0xF8 offset) and avoid specific API. - SHADOW have offset < 0. - NVM have register > 0 Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27stpmic1: program pmic to keep only the debug unit onPatrick Delaunay1-2/+3
Depending on backup register value, we maintain the debug unit powered-on for debugging purpose. Only BUCK1 is required for powering the debug unit, so revert the setting for all the other power lanes, except BUCK3 that has to be always on. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-19regulator: bd718x7: support ROHM BD71837 and BD71847 PMICsMatti Vaittinen1-53/+94
BD71837 and BD71847 is PMIC intended for powering single-core, dual-core, and quad-core SoC’s such as NXP-i.MX 8M. BD71847 is used for example on NXP imx8mm EVK. Add regulator driver for ROHM BD71837 and BD71847 PMICs. BD71837 contains 8 bucks and 7 LDOS. BD71847 is reduced version containing 6 bucks and 6 LDOs. Voltages for DVS bucks (1-4 on BD71837, 1 and 2 on BD71847) can be adjusted when regulators are enabled. For other bucks and LDOs we may have over- or undershooting if voltage is adjusted when regulator is enabled. Thus this is prevented by default. BD718x7 has a quirk which may leave power output disabled after reset if enable/disable state was controlled by SW. Thus the SW control is only allowed for BD71837 bucks 3 and 4 by default. The impact of this limitation must be evaluated board-by board and restrictions may need to be modified. (Linux driver get's these limitations from DT and we may want to implement same on u-Boot driver). Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-06-11regulator: bd71837: copy the bd71837 pmic driver from NXP imx u-bootMatti Vaittinen1-0/+62
https://source.codeaurora.org/external/imx/uboot-imx cherry picked, styled and merged commits: - MLK-18387 pmic: Add pmic driver for BD71837: e9a3bec2e95a - MLK-18590 pmic: bd71837: Change to use new fdt API: acdc5c297a96 Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-04-12stpmic1: add NVM update support in fuse commandPatrick Delaunay1-0/+7
Add functions to read/update the non volatile memory of STPMIC1 (8 bytes-register at 0xF8 address) and allow access with fuse command (bank=1, word > 0xF8). For example: STM32MP> fuse read 1 0xf8 8 Reading bank 1: Word 0x000000f8: 000000ee 00000092 000000c0 00000002 Word 0x000000fc: 000000f2 00000080 00000002 00000033 Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-12stpmic1: update register namesPatrick Delaunay1-40/+58
Alignment with STPMIC1 datasheet s/MAIN_CONTROL_REG/MAIN_CR/g s/MASK_RESET_BUCK/BUCKS_MRST_CR/g s/MASK_RESET_LDOS/LDOS_MRST_CR/g s/BUCKX_CTRL_REG/BUCKX_MAIN_CR/g s/VREF_CTRL_REG/REFDDR_MAIN_CR/g s/LDOX_CTRL_REG/LDOX_MAIN_CR/g s/USB_CTRL_REG/BST_SW_CR/g s/STPMIC1_NVM_USER_STATUS_REG/STPMIC1_NVM_SR/g s/STPMIC1_NVM_USER_CONTROL_REG/STPMIC1_NVM_CR/g and update all the associated defines. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-12power: rename stpmu1 to official name stpmic1Patrick Delaunay1-64/+71
Alignment with kernel driver name & binding introduced by https://patchwork.kernel.org/cover/10761943/ to use the final marketing name = STPMIC1. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-04-12power: stpmu1: rename files to stpmic1Patrick Delaunay1-0/+0
Prepare file modification for kernel alignment and rename driver to stpmic1. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-03-11regulator: Add support for ramp delayKrzysztof Kozlowski1-0/+2
Changing voltage and enabling regulator might require delays so the regulator stabilizes at expected level. Add support for "regulator-ramp-delay" binding which can introduce required time to both enabling the regulator and to changing the voltage. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2019-02-09power: regulator: Introduce regulator_set_enable_if_allowed apiLokesh Vutla1-0/+11
regulator_set_enable() api throws an error in the following three cases: - when requested to disable an always-on regulator - when set_enable() ops not provided by regulator driver - when enabling is actually failed.(Error returned by the regulator driver) Sometimes consumer drivers doesn't want to track the first two scenarios and just need to worry about the case where enabling is actually failed. But it is also a good practice to have an error value returned in the first two cases. So introduce an api regulator_set_enable_if_allowed() which ignores the first two error cases and returns an error as given by regulator driver. Consumer drivers can use this api need not worry about the first two error conditions. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-12-10power: make most tps drivers and the twl4030 driver compatible with DM_I2CJean-Jacques Hiblot2-0/+3
Those driver are not DM drivers per se (not using the PMIC/regulator framework) and are using the legacy I2C API. Make them compatible with the DM_I2C API. This impacts the following drivers: - palmas (used by am57xx/dra7xx evms) - tps65218 (used by am43xx evms) - tps65217 and tps65910 (used by am335x evms and am335x boneblack vboot) - twl4030 (used by omap3_logicpd) - tps65217 (used by brppt1) - twl6030 Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2018-07-19power: regulator: stpmu1: add power off delayChristophe Kerello1-0/+1
This patch adds a delay when regulators are disabled. This delay is set to 5 ms to cover all use cases. The worst use case actually seen is during a SD card power cycle. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-06-27power: pmic: Let PFUZE3000 see all 256 registersTrent Piepho1-1/+1
The PFUZE3000 uses registers addresses up to 0xff. The DM pfuze100 driver supports both pfuze100 and pfuze3000. Allow it to use the device type to return the correct number of registers. Also rename the too generic PMIC_NUM_OF_REGS enumeration value for pfuze3000 to match the other "PFUZE3000_" prefixed enumerations and the pfuze100 enumeration value PFUZE100_NUM_OF_REGS. Cc: Peng Fan <Peng.Fan@freescale.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Trent Piepho <tpiepho@impinj.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-05-18pmic: Add support for setting transmission length in uclass private dataLukasz Majewski1-0/+9
The struct uc_pmic_priv's trans_len field stores the number of types to be transmitted per PMIC transfer. Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-10power: as3722: add as3722_ldo_set_voltage signature to header fileMarcel Ziswiler1-0/+1
Just like the already present as3722_sd_set_voltage() add the currently missing signature of the as3722_ldo_set_voltage() function to its header file. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
2018-05-10power: as3722: fix ldo_get/set_enable for ldo index bigger than 7Marcel Ziswiler1-1/+2
Fix ldo_get_enable() and ldo_set_enable() functions for LDOs with an index > 7. Turns out there are actually two separate AS3722_LDO_CONTROL registers AS3722_LDO_CONTROL0 and AS3722_LDO_CONTROL1. Actually make use of both. While at it also actually use the enable parameter of the ldo_set_enable() function which now truly allows disabling as opposed to only enabling LDOs. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2018-05-07SPDX: Convert all of our multiple license tags to Linux Kernel styleTom Rini1-2/+1
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have multiple licenses (in these cases, dual license) declared in the SPDX-License-Identifier tag. In this case we change from listing "LICENSE-A LICENSE-B" or "LICENSE-A or LICENSE-B" or "(LICENSE-A OR LICENSE-B)" to "LICENSE-A OR LICENSE-B" as per the Linux Kernel style document. Note that parenthesis are allowed so when they were used before we continue to use them. Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07SPDX: Convert all of our single license tags to Linux Kernel styleTom Rini31-62/+31
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-06board: ti: am43: Fix DCDC3 voltage for epos-evmKeerthy1-0/+1
A common voltage of 1.35V was being programmed for all am43 board versions. EPOS-EVM Needs 1.20V for LPDDR2. Fixes: fc69d472621b5 (“board: ti: AM43XX: Add ddr voltage rail configuration”) Reported-by: James Doublesin <doublesin@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-03-19pmic: add stpmu1 supportPatrick Delaunay1-0/+85
This driver implements register read/write operations for STPMU1. The STPMU1 PMIC provides 4 BUCKs, 6 LDOs, 1 VREF and 2 power switches. It is accessed via an I2C interface. This device is used with STM32MP1 SoCs. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-01-24power: regulator: s2mps11: add a regulator driver for s2mps11Jaehoon Chung1-0/+55
exynos5422 has the s2mps11 PMIC. s2mps11 pmic has the 10-BUCK and 38-LDO regulators. Each IP and devices in exynos5422 can be controlled by each regulators. This patch is support for s2mps11 regulator driver. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Anand Moon <linux.amoon@gmail.com>
2017-12-29power: pmic.h: include dm/ofnode.hPeng Fan1-0/+1
Include dm/ofnode.h. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-12-12power: pmic/regulator: Add basic support for TPS65910Felix Brack1-0/+130
Texas Instrument's TPS65910 PMIC contains 3 buck DC-DC converts, one boost DC-DC converter and 8 LDOs. This patch implements driver model support for the TPS65910 PMIC and its regulators making the get/set API for regulator value/enable available. This patch depends on the patch "am33xx: Add a function to query MPU voltage in uV" to build correctly. For boards relying on the DT include file tps65910.dtsi the v3 patch "power: extend prefix match to regulator-name property" and an appropriate regulator naming is also required. Signed-off-by: Felix Brack <fb@ltec.ch> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-12-12power: extend prefix match to regulator-name propertyFelix Brack1-1/+4
This patch extends pmic_bind_children prefix matching. In addition to the node name the property regulator-name is used while trying to match prefixes. This allows assigning different drivers to regulator nodes named regulator@1 and regulator@10 for example. I have discarded the idea of using other properties then regulator-name as I do not see any benefit in using property compatible or even regulator-compatible. Of course I am open to change this if there are good reasons to do so. Signed-off-by: Felix Brack <fb@ltec.ch> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-01regulator: palmas: disable bypass when the LDO is enabledJean-Jacques Hiblot1-0/+1
Some LDOs have a bypass capability. Make sure that the bypass is disabled when is the LDO is enabled (otherwise the voltage can't be changed). Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-07-28dm: power: Convert as3722 to driver modelSimon Glass1-16/+2
Convert this PMIC driver to driver model and fix up other users. The regulator and GPIO functions are now handled by separate drivers. Update nyan-big to work correct. Three boards will need to be updated by the maintainers: apalis-tk1, cei-tk1-som. Also the TODO in the code re as3722_sd_set_voltage() needs to be completed. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Lukasz Majewski <lukma@denx.de> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-on: Jetson-TK1 Tested-by: Stephen Warren <swarren@nvidia.com>
2017-07-28power: Add a GPIO driver for the as3722 PMICSimon Glass1-0/+5
This pmic includes GPIOs which should have their own driver. Add a driver to support these. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Lukasz Majewski <lukma@denx.de> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-on: Beaver, Jetson-TK1 Tested-by: Stephen Warren <swarren@nvidia.com>
2017-07-28power: Add a regulator driver for the as3722 PMICSimon Glass1-0/+8
This pmic includes regulators which should have their own driver. Add a driver to support these. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Lukasz Majewski <lukma@denx.de> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-on: Beaver, Jetson-TK1 Tested-by: Stephen Warren <swarren@nvidia.com>
2017-07-19regulator: Change get_enable return type to integer from boolKeerthy1-4/+4
Change get_enable return type to int so errors can be returned. Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-07-11power: regulator: rk8xx: Allow input current/charger shutdown configurationWadim Egorov1-0/+2
The RK818 PMIC contains a charger. Add very basic charger functionality to be able to regulate the USB input current and charger shutdown limits. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-06-09Fixup bug in PMIC TPS65217 register address definitionBrock Zheng Techyauld Ltd1-0/+1
The addresses of the registers in TI TPS65217 are not continuous. There is a gap between ENABLE(0x16) and DEFUVLO(0x18). No 0x17 register available. Fixup the enum values by adding a 'reserved' placeholder to correct the addresses higher than 0x17. Series-to: Heiko Schocher <hs@denx.de> Signed-off-by: Brock Zheng Techyauld Ltd <yzheng@techyauld.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2017-06-09power: pmic: lp87565: Add the basic pmic supportKeerthy1-0/+12
Add support to bind the regulators/child nodes with the pmic. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2017-06-09board: ti: AM43XX: Add ddr voltage rail configurationKeerthy1-0/+1
Add ddr voltage rail (dcdc3) configuration. Set the dcdc3 DDR supply to 1.35V. Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2017-06-01dm: pmic: Convert uclass to livetreeSimon Glass1-1/+1
Update the pmic uclass and all pmics to support a live device tree. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-29power: pmic: tps65218: Fix tps65218_voltage_update functionKeerthy1-0/+2
Currently while setting the vsel value for dcdc1 and dcdc2 the driver is wrongly masking the entire 8 bits in the process clearing PFM (bit7) field as well. Hence describe an appropriate mask for vsel field and modify only those bits in the vsel mask. Source: http://www.ti.com/lit/ds/symlink/tps65218.pdf Signed-off-by: Keerthy <j-keerthy@ti.com> Fixes: 86db550b38 ("power: Add support for the TPS65218 PMIC") Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2017-05-12arm: am33xx: Fix MPU opp selectionLokesh Vutla1-0/+1
Update MPU frequencies and voltages as per the latest DM[1] dated: OCT 2011 Revised APRIL 2016, Section 5.4. Below is the consolidated data: MPU values for PG 2.0 and later(Package ZCZ and ZCE): ------------------------------------------------------- | | ZCZ | ZCE | |-------------------------------------------------------| | | VDD[V] | ARM [MHz] | VDD[V] | ARM [MHz] | |-------|----------|------------|----------|------------| | NITRO | 1.325 | 1000 | NA | NA | |-------|----------|------------|----------|------------| | TURBO | 1.26 | 800 | NA | NA | |-------|----------|------------|----------|------------| |OPP120 | 1.20 | 720 | NA | NA | |-------|----------|------------|----------|------------| |OPP100 | 1.10 | 600 | 1.10 | 600 | |-------|----------|------------|----------|------------| | OPP50 | 0.95 | 300 | 0.95 | 300 | ------------------------------------------------------- There is no eFuse blown on PG1.0 Silicons due to which there is no way to detect the maximum frequencies supported. So default to OPP100 for which both frequency and voltages are common on both the packages. [1] http://www.ti.com/lit/ds/symlink/am3356.pdf Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-27 15:47:59 +0000