summaryrefslogtreecommitdiff
path: root/board
AgeCommit message (Collapse)AuthorFilesLines
2017-06-16powerpc, 5xxx, 512x: remove support for mpc5xxx and mpc512xHeiko Schocher102-11087/+0
There was for long time no activity in the mpx5xxx area. We need to go further and convert to Kconfig, but it turned out, nobody is interested anymore in mpc5xxx, so remove it. Signed-off-by: Heiko Schocher <hs@denx.de>
2017-06-16board/BuR/brxre1: fix MMC bootHannes Schmelzer1-1/+6
since commit 'd5abcf94c7123167725fc22ace342f0d455093c1' - ti: boot: Register the MMC controllers in SPL in the same way as in u-boot MMC boot on brxre1 board is broken, with this commit we make our board working again. Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2017-06-16treewide: remove unneeded semicolonsMasahiro Yamada5-7/+7
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-06-14Merge git://git.denx.de/u-boot-mpc85xxTom Rini27-1141/+17
2017-06-14Merge branch 'master' of git://git.denx.de/u-boot-tegraTom Rini4-107/+0
2017-06-12ARM: tegra: remove Whistler supportStephen Warren4-107/+0
Whistler is an ancient Tegra 2 reference board. I may have been the only person who ever used it with upstream software, and I've just recycled the board hardware. Hence, it makes sense to remove support from software. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2017-06-12powerpc: fsl: Update maintainersYork Sun4-5/+5
Update maintainers for B4860QDS, P1010RDB, P1_TWR, T104xRDB. Signed-off-by: York Sun <york.sun@nxp.com>
2017-06-12powerpc: mpc8569mds: Update config and maintainerYork Sun1-1/+1
Enable DHCP command by default. Update maintainer info. Signed-off-by: York Sun <york.sun@nxp.com>
2017-06-12powerpc: mpc8568mds: Update board configYork Sun1-1/+1
Enable DHCP command by default. Move environmental variable location to before U-Boot image. Enlarge reserved mem for malloc. Update maintainer. Signed-off-by: York Sun <york.sun@nxp.com>
2017-06-12powerpc: mpc8536ds: Update maintainerYork Sun1-1/+1
Signed-off-by: York Sun <york.sun@nxp.com>
2017-06-12powerpc: mpc8544ds: Update maintainerYork Sun1-1/+1
Signed-off-by: York Sun <york.sun@nxp.com>
2017-06-12powerpc: mpc8548cds: Update maintainerYork Sun1-1/+1
Signed-off-by: York Sun <york.sun@nxp.com>
2017-06-12powerpc: mpc86xx: Update maintainer for MPC8610HPCD and MPC8641HPCNYork Sun2-3/+3
Signed-off-by: York Sun <york.sun@nxp.com>
2017-06-12powerpc: mpc85xx: Update maintainer for MPC8541CDS and MPC8555CDSYork Sun2-4/+4
Signed-off-by: York Sun <york.sun@nxp.com>
2017-06-12powerpc: mpc8540ads: mpc8560ads: Drop support for MPC8540/60ADSYork Sun14-1124/+0
Drop support for these two legacy boards. Signed-off-by: York Sun <york.sun@nxp.com>
2017-06-12board: ti: am335x: Fix scale_vcore for beaglebonesLokesh Vutla2-11/+9
commit 0650798824 ("board: am335x: Introduce scale_vcores") updated voltages of each board based on efuse. It updated beagle bone specific voltages under the condition board_is_bone(). But this is true only for BeagleBoneWhite. Due to which voltages are not configured for BBB, BBW as wrong device is being probed. So create a common function board_is_beaglebonex() which includes am335x based beagle family. Use this for updating voltages. Also remove extra if condition for selecting voltages which is done later using a switch case and match usb current limit as before the commit 0650798824. Fixes: 0650798824 ("board: am335x: Introduce scale_vcores") Reported-by: Emmanuel Vadot <manu@bidouilliste.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2017-06-12powerpc, 5xx: remove support for 5xxHeiko Schocher9-1732/+2
There was for long time no activity in the 5xx area. We need to go further and convert to Kconfig, but it turned out, nobody is interested anymore in 5xx, so remove it. Signed-off-by: Heiko Schocher <hs@denx.de>
2017-06-12powerpc, 8260: remove support for mpc8260Heiko Schocher4-490/+0
There was for long time no activity in the 8260 area. We need to go further and convert to Kconfig, but it turned out, nobody is interested anymore in 8260, so remove it. Signed-off-by: Heiko Schocher <hs@denx.de>
2017-06-12powerpc, 8xx: remove support for 8xxHeiko Schocher6-1054/+0
There was for long time no activity in the 8xx area. We need to go further and convert to Kconfig, but it turned out, nobody is interested anymore in 8xx, so remove it (with a heavy heart, knowing that I remove here the root of U-Boot). Signed-off-by: Heiko Schocher <hs@denx.de>
2017-06-12arm: dra7: Set fastboot variables in environmentSemen Protsenko1-0/+1
One can obtain those variables using next commands: $ fastboot getvar cpu $ fastboot getvar secure $ fastboot getvar board_rev $ fastboot getvar userdata_size Those variables are needed for fastboot.sh script. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-06-12arm: am57xx: Set fastboot variables in environmentSemen Protsenko1-0/+1
One can obtain those variables using next commands: $ fastboot getvar cpu $ fastboot getvar secure $ fastboot getvar board_rev $ fastboot getvar userdata_size Those variables are needed for fastboot.sh script. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-06-10Merge branch 'master' of git://git.denx.de/u-boot-mmcTom Rini1-0/+7
2017-06-09board: mpl: pci: Fix checkpatch.plChakra Divi1-17/+25
Fixed checkpatch.pl errors/warnings in board/mpl/common/pci.c Signed-off-by: Chakra Divi <chakra@openedev.com>
2017-06-09board: ti: am572x-evm: Update pinmux using latest PMTLokesh Vutla1-91/+177
Update the board pinmux for AM572x-evm using latest PMT[1] and the board files named am572x_gp_evm_A3a_sr2p0 and am572x_gp_evm_A2b_sr1p1 that were autogenerated on 30th January, 2017 by "Ahmad Rashed <a-rashed@ti.com>" and "Tom Johnson <thjohnson@ti.com>". Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2017-06-09board: ti: am571x-idk: Update pinmux using latest PMTLokesh Vutla2-246/+266
Update the board pinmux for AM571x-IDK board using latest PMT[1] and the board files named am571x_idk_v1p3b_sr2p0 that were autogenerated on 23rd March, 2017 by "Ahmad Rashed <a-rashed@ti.com>" and "Tom Johnson <thjohnson@ti.com>". [1] https://dev.ti.com/pinmux/app.html#/default/ Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2017-06-09board: ti: am572x-idk: Update pinmux using latest PMTLokesh Vutla1-99/+128
Update the board pinmux for AM572x-IDK board using latest PMT[1] and the board files named am572x_idk_v1p3b_sr2p0 that were autogenerated on 30th January, 2017 by "Ahmad Rashed <a-rashed@ti.com>" and "Tom Johnson <thjohnson@ti.com>". [1] https://dev.ti.com/pinmux/app.html#/default/ Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2017-06-09arm: omap: Unify get_device_type() functionSemen Protsenko2-0/+2
Refactor OMAP3/4/5 code so that we have only one get_device_type() function for all platforms. Details: - Add ctrl variable for AM33xx and OMAP3 platforms (like it's done for OMAP4/5), so we can obtain status register in common way - For now ctrl structure for AM33xx/OMAP3 contains only status register address - Run hw_data_init() in order to assign ctrl to proper structure - Remove DEVICE_MASK and DEVICE_GP definitions as they are not used (DEVICE_TYPE_MASK and GP_DEVICE are used instead) - Guard structs in omap_common.h with #ifdefs, because otherwise including omap_common.h on non-omap4/5 board files breaks compilation Buildman script was run for all OMAP boards. Result output: arm: (for 38/616 boards) all +352.5 bss -1.4 data +3.5 rodata +300.0 spl/u-boot-spl:all +284.7 spl/u-boot-spl:data +2.2 spl/u-boot-spl:rodata +252.0 spl/u-boot-spl:text +30.5 text +50.4 (no errors to report) Tested on AM57x EVM and BeagleBoard xM. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> [trini: Rework the guards as to not break TI81xx] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-06-09spl: stm32f7: configure for xip bootingVikas Manocha1-1/+1
With xip booting configuration, we don't need to copy the next image (U-Boot or linux xipimage) from flash to sdram area. Flash memory organization is like this: spl-U-Boot: u-boot-spl.bin : 0x0800_0000 U-Boot : u-boot-dtb.bin : 0x0800_8000 linux : xipImage : 0x0800_8000 It is also possible to have U-Boot binary & linux binaries configured at different addresses of flash memory like U-Boot at 0x0800_8000 & linux xipImage at 0x0800_4000. But in any case, spl-U-Boot needs to be compiled for U-Boot as next binary with SPL_OS_BOOT option disabled. By default, spl is configured to boot linux xipImage. Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2017-06-09spl: stm32f7: add kernel boot supportVikas Manocha1-0/+9
Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
2017-06-09stm32: stm32f7: add spl build supportVikas Manocha1-1/+26
This commit supports booting from stm32 internal nor flash. spl U-Boot initializes the sdram memory, copies next image (e.g. standard U-Boot) to sdram & then jumps to entry point. Here are the flash memory addresses for U-Boot-spl & standard U-Boot: - spl U-Boot : 0x0800_0000 - standard U-Boot : 0x0800_8000 To compile u-boot without spl: Remove SUPPORT_SPL configuration (arch/arm/mach-stm32/Kconfig) Signed-off-by: Vikas Manocha <vikas.manocha@st.com> [trini: Rework Kconfig logic a bit] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-06-09board: ti: AM43XX: Add ddr voltage rail configurationKeerthy1-0/+7
Add ddr voltage rail (dcdc3) configuration. Set the dcdc3 DDR supply to 1.35V. Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2017-06-07rockchip: rk3328: don't implement usb_gadget_handle_interrupts twicePhilipp Tomsich1-5/+0
The usb_gadget_handle_interrupts()-function is already implemented by drivers/usb/gadget/dwc2_udc_otg.c, so we need to avoid defining it in the evb-rk3328.c board-specific file. This change fixes the following build error (from buildman): drivers/usb/gadget/built-in.o: In function `usb_gadget_handle_interrupts': build/../drivers/usb/gadget/dwc2_udc_otg.c:850: multiple definition of `usb_gadget_handle_interrupts' board/rockchip/evb_rk3328/built-in.o:build/../board/rockchip/evb_rk3328/evb-rk3328.c:37: first defined here make[1]: *** [u-boot] Error 1 Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Simon Glass <sjg@chromium.org>
2017-06-07rockchip: Add basic support for evb-rv1108 boardAndy Yan5-0/+127
Add basic support for rv1108 evb, whith this patch we can boot into u-boot console. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-06-07rockchip: evb-rk3328: update board maintainerKever Yang1-1/+1
Update maintainer to Kever Yang for William Zhang is not work for this board now. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-06-07rockchip: rk3368: Add PX5 Evaluation boardAndy Yan5-0/+80
PX5 EVB is designed by Rockchip for automotive field with integrated CVBS (TP2825) / MIPI DSI / CSI / LVDS HDMI video input/output interface, audio codec ES8396, WIFI / BT (on RTL8723BS), Gsensor BMA250E and light&proximity sensor STK3410. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-06-07rockchip: rk3368: Add initial support for RK3368 based GeekBoxAndreas Färber5-0/+57
The GeekBox is a TV box from GeekBuying, based on an MXM3 module. The module can be used with base boards such as the GeekBox Landingship. This adds basic support to chain-load U-Boot from Rockchip's miniloader. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-06-07rockchip: rk3368: add Sheep boardAndy Yan5-0/+109
Sheep board is designed by Rockchip as a EVB for rk3368. Currently it is able to boot a linux kernel and system to console with the miniloader run as fist level loader. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
2017-06-07rockchip: board: puma_rk3399: build FIT image via u-boot.itbPhilipp Tomsich1-3/+2
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Simon Glass <sjg@chromium.org>
2017-06-07rockchip: board: puma_rk3399: derive ethaddr from cpuidKlaus Goger1-2/+40
Generate a MAC address based on the cpuid available in the efuse block: Use the first 6 byte of the cpuid's SHA256 hash and set the locally administered bits. Also ensure that the multicast bit is cleared. The MAC address is only generated and set if there is no ethaddr present in the saved environment. Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com> Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-06-07rockchip: board: puma_rk3399: add support for serial# and cpuid# via efusesPhilipp Tomsich1-0/+80
With our efuse driver for the RK3399 ready, we can add the board-specific code that consumes the cpuid from the efuse block and postprocesses it into the system serial (using the same CRC32 based derivation as in Linux). We expose the cpuid via two distinct environment variables: serial# - the serial number, as derived in Linux cpuid# - the raw 16 byte CPU id field from the fuse block Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Simon Glass <sjg@chromium.org>
2017-06-05arm64: hikey: Fix instructions in readmeMichal Simek1-4/+4
Fix inaccurate instructions in README. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-06-05board: ti: am571-idx: Add vcores supportKeerthy1-0/+50
Update vcores for am571-idk board. Reported-by: Steve Kipisz <s-kipisz2@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-06-05ARM: k2g: Fix passing main pll info for higher speedsLokesh Vutla1-8/+8
Main pll is marked as arm plls for higher speeds. Fix this. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2017-06-05ARM: am57xx: cl-som-am57x: support for AM5718Uri Mashiach1-0/+5
Disable SDRAM controller EMIF2 for single core SOC Set SDRAM size size to 1GB Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-06-05common: freescale: Move arch-specific declarationsSimon Glass8-0/+8
The declarations should not be in common.h. Move them to the arch-specific headers. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Fixup thinko defined(FSL_LSCH3) -> defined(CONFIG_FSL_LSCH3)] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-06-05arm: Include asm/setup.h explictlySimon Glass9-0/+9
Include this header where needed so we do not need to rely on common.h. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05arm: Add explicit include of <asm/mach-types.h>Simon Glass53-0/+53
Rather than relying on common.h to provide this include, which is going away at some point, include it explicitly in each file. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-06-05nds32: Remove include files from common.hSimon Glass1-0/+2
With a few tweaks we can avoid including these files, which are only needed by two C files. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-06-05ti816x: Modernize the defconfigTom Rini1-1/+1
- Switch to using <configs/ti_armv7_omap.h> and family. This lets us drop lots of custom defines. - Ensure that our default environment uses DEFAULT_LINUX_BOOT_ENV so that Linux will boot correctly. - Enable CONFIG_DISTRO_DEFAULTS - Switch to using CONFIG_OF_CONTROL - Various other cleanups to match other SoCs in the family line. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-06-05ti816x: Enable NANDTom Rini1-1/+3
The TI8168-EVM comes with NAND on board. Enable it and move environment over there. Signed-off-by: Tom Rini <trini@konsulko.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-01 04:10:05 +0000