diff options
Diffstat (limited to 'scripts/tizen/sd_fusing_rpi3.sh')
| -rwxr-xr-x | scripts/tizen/sd_fusing_rpi3.sh | 328 |
1 files changed, 328 insertions, 0 deletions
diff --git a/scripts/tizen/sd_fusing_rpi3.sh b/scripts/tizen/sd_fusing_rpi3.sh new file mode 100755 index 0000000000..f322e3ce91 --- /dev/null +++ b/scripts/tizen/sd_fusing_rpi3.sh @@ -0,0 +1,328 @@ +#!/bin/bash + +declare FORMAT="" +declare DEVICE="" + +# Binaires array for fusing +declare -a FUSING_BINARY_ARRAY +declare -i FUSING_BINARY_NUM=0 + +declare CONV_ASCII="" +declare -i FUS_ENTRY_NUM=0 + +# binary name | part number | bs +declare -a PART_TABLE=( + "boot.img" 1 512 + "rootfs.img" 2 4M + "system-data.img" 3 4M + "user.img" 5 4M + "modules.img" 6 512 + "ramdisk.img" 7 512 + "ramdisk-recovery.img" 8 512 + ) + +declare -r -i PART_TABLE_ROW=3 +declare -r -i PART_TABLE_COL=${#PART_TABLE[*]}/${PART_TABLE_ROW} + +# partition table support +function get_index_use_name () { + local -r binary_name=$1 + + for ((idx=0;idx<$PART_TABLE_COL;idx++)); do + if [ ${PART_TABLE[idx * ${PART_TABLE_ROW} + 0]} == $binary_name ]; then + return $idx + fi + done + + # return out of bound index + return $idx +} + +function print_message () { + local color=$1 + local message=$2 + + tput setaf $color + tput bold + echo "" + echo $message + tput sgr 0 +} + +function fusing_image () { + local -r fusing_img=$1 + + # get binary info using basename + get_index_use_name $(basename $fusing_img) + local -r -i part_idx=$? + + if [ $part_idx -ne $PART_TABLE_COL ];then + local -r device=$DEVICE${PART_TABLE[${part_idx} * ${PART_TABLE_ROW} + 1]} + local -r bs=${PART_TABLE[${part_idx} * ${PART_TABLE_ROW} + 2]} + else + echo "Not supported binary: $fusing_img" + return + fi + + local -r input_size=`du -b $fusing_img | awk '{print $1}'` + + print_message 2 "[Fusing $1]" + umount $device + dd if=$fusing_img | pv -s $input_size | dd of=$device bs=$bs + resize2fs -f $device +} + +function fuse_image_tarball () { + local -r filepath=$1 + local -r temp_dir="tar_tmp" + + mkdir -p $temp_dir + tar xvf $filepath -C $temp_dir + cd $temp_dir + + for file in * + do + fusing_image $file + done + + cd .. + rm -rf $temp_dir + eval sync +} + +function fuse_image () { + + if [ "$FUSING_BINARY_NUM" == 0 ]; then + return + fi + + for ((fuse_idx = 0 ; fuse_idx < $FUSING_BINARY_NUM ; fuse_idx++)) + do + local filename=${FUSING_BINARY_ARRAY[fuse_idx]} + + case "$filename" in + *.tar | *.tar.gz) + fuse_image_tarball $filename + ;; + *) + fusing_image $filename + ;; + esac + done + echo "" +} + +# partition format +function mkpart_3 () { + # NOTE: if your sfdisk version is less than 2.26.0, then you should use following sfdisk command: + # sfdisk --in-order --Linux --unit M $DISK <<-__EOF__ + + # NOTE: sfdisk 2.26 doesn't support units other than sectors and marks --unit option as deprecated. + # The input data needs to contain multipliers (MiB) instead. + local version=`sfdisk -v | awk '{print $4}'` + local major=${version%%.*} + local version=${version:`expr index $version .`} + local minor=${version%%.*} + local sfdisk_new=0 + + if [ $major -gt 2 ]; then + sfdisk_new=1 + else + if [ $major -eq 2 -a $minor -ge 26 ]; then + sfdisk_new=1 + fi + fi + + local -r DISK=$DEVICE + local -r SIZE=`sfdisk -s $DISK` + local -r SIZE_MB=$((SIZE >> 10)) + + local -r BOOT_SZ=64 + local -r ROOTFS_SZ=3072 + local -r DATA_SZ=512 + local -r MODULE_SZ=20 + local -r RAMDISK_SZ=8 + local -r RAMDISK_RECOVERY_SZ=12 + if [ $sfdisk_new == 1 ]; then + local -r EXTEND_SZ=8 + else + local -r EXTEND_SZ=4 + fi + + let "USER_SZ = $SIZE_MB - $BOOT_SZ - $ROOTFS_SZ - $DATA_SZ - $MODULE_SZ - $RAMDISK_SZ - $RAMDISK_RECOVERY_SZ - $EXTEND_SZ" + + local -r BOOT=boot + local -r ROOTFS=rootfs + local -r SYSTEMDATA=system-data + local -r USER=user + local -r MODULE=modules + local -r RAMDISK=ramdisk + local -r RAMDISK_RECOVERY=ramdisk-recovery + + if [[ $USER_SZ -le 100 ]] + then + echo "We recommend to use more than 4GB disk" + exit 0 + fi + + echo "========================================" + echo "Label dev size" + echo "========================================" + echo $BOOT" " $DISK"1 " $BOOT_SZ "MB" + echo $ROOTFS" " $DISK"2 " $ROOTFS_SZ "MB" + echo $SYSTEMDATA" " $DISK"3 " $DATA_SZ "MB" + echo "[Extend]"" " $DISK"4" + echo " "$USER" " $DISK"5 " $USER_SZ "MB" + echo " "$MODULE" " $DISK"6 " $MODULE_SZ "MB" + echo " "$RAMDISK" " $DISK"7 " $RAMDISK_SZ "MB" + echo " "$RAMDISK_RECOVERY" " $DISK"7 " $RAMDISK_RECOVERY_SZ "MB" + + local MOUNT_LIST=`mount | grep $DISK | awk '{print $1}'` + for mnt in $MOUNT_LIST + do + umount $mnt + done + + echo "Remove partition table..." + dd if=/dev/zero of=$DISK bs=512 count=16 conv=notrunc + + if [ $sfdisk_new == 1 ]; then + sfdisk $DISK <<-__EOF__ + 4MiB,${BOOT_SZ}MiB,0xE,* + 8MiB,${ROOTFS_SZ}MiB,,- + 8MiB,${DATA_SZ}MiB,,- + 8MiB,,E,- + ,${USER_SZ}MiB,,- + ,${MODULE_SZ}MiB,,- + ,${RAMDISK_SZ}MiB,,- + ,${RAMDISK_RECOVERY_SZ}MiB,,- + __EOF__ + else + sfdisk --in-order --Linux --unit M $DISK <<-__EOF__ + 4,$BOOT_SZ,0xE,* + ,$ROOTFS_SZ,,- + ,$DATA_SZ,,- + ,,E,- + ,$USER_SZ,,- + ,$MODULE_SZ,,- + ,$RAMDISK_SZ,,- + ,$RAMDISK_RECOVERY_SZ,,- + __EOF__ + fi + + mkfs.vfat -F 16 ${DISK}1 -n $BOOT + mkfs.ext4 -q ${DISK}2 -L $ROOTFS -F + mkfs.ext4 -q ${DISK}3 -L $SYSTEMDATA -F + mkfs.ext4 -q ${DISK}5 -L $USER -F + mkfs.ext4 -q ${DISK}6 -L $MODULE -F + mkfs.ext4 -q ${DISK}7 -L $RAMDISK -F + mkfs.ext4 -q ${DISK}8 -L $RAMDISK_RECOVERY -F +} + +function show_usage () { + echo "- Usage:" + echo " sudo ./sd_fusing*.sh -d <device> [-b <path> <path> ..] [--format]" +} + +function check_partition_format () { + if [ "$FORMAT" != "2" ]; then + echo "-----------------------" + echo "Skip $DEVICE format" + echo "-----------------------" + return 0 + fi + + echo "-------------------------------" + echo "Start $DEVICE format" + echo "" + mkpart_3 + echo "End $DEVICE format" + echo "-------------------------------" + echo "" +} + +function check_args () { + if [ "$DEVICE" == "" ]; then + echo "$(tput setaf 1)$(tput bold)- Device node is empty!" + show_usage + tput sgr 0 + exit 0 + fi + + if [ "$DEVICE" != "" ]; then + echo "Device: $DEVICE" + fi + + if [ "$FUSING_BINARY_NUM" != 0 ]; then + echo "Fusing binary: " + for ((bid = 0 ; bid < $FUSING_BINARY_NUM ; bid++)) + do + echo " ${FUSING_BINARY_ARRAY[bid]}" + done + echo "" + fi + + if [ "$FORMAT" == "1" ]; then + echo "" + echo "$(tput setaf 3)$(tput bold)$DEVICE will be formatted, Is it OK? [y/n]" + tput sgr 0 + read input + if [ "$input" == "y" ] || [ "$input" == "Y" ]; then + FORMAT=2 + else + FORMAT=0 + fi + fi +} + +function print_logo () { + echo "" + echo "Raspberry Pi3 downloader, version 0.1" + echo "" +} + +print_logo + +function add_fusing_binary() { + local declare binary_name=$1 + FUSING_BINARY_ARRAY[$FUSING_BINARY_NUM]=$binary_name + + FUSING_BINARY_NUM=$((FUSING_BINARY_NUM + 1)) +} + + +declare -i binary_option=0 + +while test $# -ne 0; do + option=$1 + shift + + case $option in + --f | --format) + FORMAT="1" + binary_option=0 + ;; + -d) + DEVICE=$1 + binary_option=0 + shift + ;; + -b) + add_fusing_binary $1 + binary_option=1 + shift + ;; + *) + if [ $binary_option == 1 ];then + add_fusing_binary $option + else + echo "Unkown command: $option" + exit + fi + ;; + esac +done + +check_args +check_partition_format +fuse_image |