1 files changed, 13 insertions, 13 deletions

diff --git a/lib_microblaze/board.c b/lib_microblaze/board.c
index 09d4d943de..cd619185b4 100644
--- a/lib_microblaze/board.c
+++ b/lib_microblaze/board.c
@@ -34,10 +34,10 @@ DECLARE_GLOBAL_DATA_PTR;
 
 const char version_string[] = U_BOOT_VERSION " (" __DATE__ " - " __TIME__ ")";
 
-#ifdef CFG_GPIO_0
+#ifdef CONFIG_SYS_GPIO_0
 extern int gpio_init (void);
 #endif
-#ifdef CFG_INTC_0
+#ifdef CONFIG_SYS_INTC_0
 extern int interrupts_init (void);
 #endif
 #if defined(CONFIG_CMD_NET)
@@ -54,13 +54,13 @@ static ulong mem_malloc_brk;
 
 /*
  * The Malloc area is immediately below the monitor copy in DRAM
- * aka CFG_MONITOR_BASE - Note there is no need for reloc_off
+ * aka CONFIG_SYS_MONITOR_BASE - Note there is no need for reloc_off
  * as our monitory code is run from SDRAM
  */
 static void mem_malloc_init (void)
 {
-	mem_malloc_end = (CFG_MALLOC_BASE + CFG_MALLOC_LEN);
-	mem_malloc_start = CFG_MALLOC_BASE;
+	mem_malloc_end = (CONFIG_SYS_MALLOC_BASE + CONFIG_SYS_MALLOC_LEN);
+	mem_malloc_start = CONFIG_SYS_MALLOC_BASE;
 	mem_malloc_brk = mem_malloc_start;
 	memset ((void *)mem_malloc_start, 0, mem_malloc_end - mem_malloc_start);
 }
@@ -94,10 +94,10 @@ typedef int (init_fnc_t) (void);
 init_fnc_t *init_sequence[] = {
 	env_init,
 	serial_init,
-#ifdef CFG_GPIO_0
+#ifdef CONFIG_SYS_GPIO_0
 	gpio_init,
 #endif
-#ifdef CFG_INTC_0
+#ifdef CONFIG_SYS_INTC_0
 	interrupts_init,
 #endif
 	NULL,
@@ -107,18 +107,18 @@ void board_init (void)
 {
 	bd_t *bd;
 	init_fnc_t **init_fnc_ptr;
-	gd = (gd_t *) CFG_GBL_DATA_OFFSET;
+	gd = (gd_t *) CONFIG_SYS_GBL_DATA_OFFSET;
 #if defined(CONFIG_CMD_FLASH)
 	ulong flash_size = 0;
 #endif
 	asm ("nop");	/* FIXME gd is not initialize - wait */
-	memset ((void *)gd, 0, CFG_GBL_DATA_SIZE);
+	memset ((void *)gd, 0, CONFIG_SYS_GBL_DATA_SIZE);
 	gd->bd = (bd_t *) (gd + 1);	/* At end of global data */
 	gd->baudrate = CONFIG_BAUDRATE;
 	bd = gd->bd;
 	bd->bi_baudrate = CONFIG_BAUDRATE;
-	bd->bi_memstart = CFG_SDRAM_BASE;
-	bd->bi_memsize = CFG_SDRAM_SIZE;
+	bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
+	bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
 
 	/* Initialise malloc() area */
 	mem_malloc_init ();
@@ -131,10 +131,10 @@ void board_init (void)
 	}
 
 #if defined(CONFIG_CMD_FLASH)
-	bd->bi_flashstart = CFG_FLASH_BASE;
+	bd->bi_flashstart = CONFIG_SYS_FLASH_BASE;
 	if (0 < (flash_size = flash_init ())) {
 		bd->bi_flashsize = flash_size;
-		bd->bi_flashoffset = CFG_FLASH_BASE + flash_size;
+		bd->bi_flashoffset = CONFIG_SYS_FLASH_BASE + flash_size;
 	} else {
 		puts ("Flash init FAILED");
 		bd->bi_flashstart = 0;