diff options
Diffstat (limited to 'include/env/pg-wcom')
| -rw-r--r-- | include/env/pg-wcom/common.env | 68 | ||||
| -rw-r--r-- | include/env/pg-wcom/ls102xa.env | 29 | ||||
| -rw-r--r-- | include/env/pg-wcom/powerpc.env | 16 |
3 files changed, 113 insertions, 0 deletions
diff --git a/include/env/pg-wcom/common.env b/include/env/pg-wcom/common.env new file mode 100644 index 0000000000..4b660cebd6 --- /dev/null +++ b/include/env/pg-wcom/common.env @@ -0,0 +1,68 @@ + +#ifndef WCOM_UBI_PARTITION_APP +/* one flash chip only called boot */ +# define WCOM_UBI_LINUX_MTD ubi.mtd=ubi0 +ubiattach=ubi part ubi0 +#else /* WCOM_UBI_PARTITION_APP */ +/* two flash chips called boot and app */ +# define WCOM_UBI_LINUX_MTD ubi.mtd=ubi0 ubi.mtd=ubi1 +ubiattach=if test ${boot_bank} -eq 0; + then; + ubi part ubi0; + else; + ubi part ubi1; + fi +#endif /* WCOMC_UBI_PARTITION_APP */ + +actual_bank=0 + +add_default=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:${netdev}:off: + console=ttyS0,${baudrate} mem=${kernelmem} init=${init} + phram.phram=phvar,${varaddr},CONFIG_KM_PHRAM + WCOM_UBI_LINUX_MTD + +addpanic=setenv bootargs ${bootargs} panic=1 panic_on_oops=1 +altbootcmd=run bootcmd +backup_bank=0 +boot=bootm ${load_addr_r} - ${fdt_addr_r} + +bootcmd=km_checkbidhwk && + setenv bootcmd 'if km_checktestboot; + then; + setenv boot_bank ${test_bank}; + else; + setenv boot_bank ${actual_bank}; + fi; + run ${subbootcmds}; reset' && + setenv altbootcmd 'setenv boot_bank ${backup_bank}; + run ${subbootcmds}; + reset' && + saveenv && + saveenv && + boot + +cramfsaddr=CONFIG_KM_CRAMFS_ADDR +cramfsloadfdt=cramfsload ${fdt_addr_r} fdt_0x${IVM_BoardId}_0x${IVM_HWKey}.dtb +cramfsloadkernel=cramfsload ${load_addr_r} ${uimage} + +develop=tftp ${load_addr_r} scripts/develop-${arch}.txt && + env import -t ${load_addr_r} ${filesize} && + run setup_debug_env + +env_version=1 +fdt_addr_r=CONFIG_KM_FDT_ADDR +flashargs=setenv bootargs root=mtdblock:rootfs${boot_bank} rootfstype=squashfs ro +init=/sbin/init-overlay.sh +load=tftpboot ${load_addr_r} ${hostname}/u-boot.bin +load_addr_r=CONFIG_KM_KERNEL_ADDR +pnvramsize=CONFIG_KM_PNVRAM + +ramfs=tftp ${load_addr_r} scripts/ramfs-${arch}.txt && + env import -t ${load_addr_r} ${filesize} && + run setup_debug_env + +release=run newenv; reset +subbootcmds=ubiattach ubicopy checkfdt cramfsloadfdt set_fdthigh + cramfsloadkernel flashargs add_default addpanic boot +testbootcmd=setenv boot_bank ${test_bank}; run ${subbootcmds}; reset +ubicopy=ubi read ${cramfsaddr} bootfs${boot_bank} diff --git a/include/env/pg-wcom/ls102xa.env b/include/env/pg-wcom/ls102xa.env new file mode 100644 index 0000000000..abbec42457 --- /dev/null +++ b/include/env/pg-wcom/ls102xa.env @@ -0,0 +1,29 @@ +#define WCOM_UBI_PARTITION_APP + +#include <env/pg-wcom/common.env> + +EEprom_ivm=pca9547:70:9 +boot=bootm $load_addr_r - $fdt_addr_r +checkfdt=true +cramfsloadfdt=cramfsload $fdt_addr_r fdt_0x${IVM_BoardId}_0x${IVM_HWKey}.dtb +ethrotate=no +hwconfig=devdis:esdhc,usb3,usb2,sata,sec,dcu,duart2,qspi,can1,can2_4,ftm2_8,i2c2_3,sai1_4,lpuart2_6,asrc,spdif,lpuart1,ftm1 +netdev=eth2 + +newenv=protect off CONFIG_ENV_ADDR_REDUND +0x40000 && + erase CONFIG_ENV_ADDR_REDUND +0x40000 && + protect on CONFIG_ENV_ADDR_REDUND +0x40000 + +set_fdthigh=true + +update=protect off CONFIG_SYS_MONITOR_BASE +${filesize} && + erase CONFIG_SYS_MONITOR_BASE +${filesize} && + cp.b ${load_addr_r} CONFIG_SYS_MONITOR_BASE ${filesize} && + protect on CONFIG_SYS_MONITOR_BASE +${filesize} + +update-nor=protect off CONFIG_SYS_FLASH_BASE +${filesize} && + erase CONFIG_SYS_FLASH_BASE +${filesize} && + cp.b ${load_addr_r} CONFIG_SYS_FLASH_BASE ${filesize} && + protect on CONFIG_SYS_MONITOR_BASE +0x100000 + +uimage=uImage diff --git a/include/env/pg-wcom/powerpc.env b/include/env/pg-wcom/powerpc.env new file mode 100644 index 0000000000..744c07388c --- /dev/null +++ b/include/env/pg-wcom/powerpc.env @@ -0,0 +1,16 @@ +#define BOOTFLASH_START 0xF0000000 + +arch=ppc_82xx +bootm_mapsize=CONFIG_SYS_BOOTM_LEN +checkfdt=true +set_fdthigh=true + +update=protect off BOOTFLASH_START +${filesize} && + erase BOOTFLASH_START +${filesize} && + cp.b ${load_addr_r} BOOTFLASH_START ${filesize} && + protect on BOOTFLASH_START +${filesize} + +newenv=prot off CONFIG_ENV_ADDR +0x40000 && + era CONFIG_ENV_ADDR +0x40000 + +unlock=yes |