diff options
Diffstat (limited to 'drivers/ram/aspeed')
| -rw-r--r-- | drivers/ram/aspeed/sdram_ast2600.c | 163 |
1 files changed, 138 insertions, 25 deletions
diff --git a/drivers/ram/aspeed/sdram_ast2600.c b/drivers/ram/aspeed/sdram_ast2600.c index b09232a304..bda02d0629 100644 --- a/drivers/ram/aspeed/sdram_ast2600.c +++ b/drivers/ram/aspeed/sdram_ast2600.c @@ -20,6 +20,119 @@ #define DDR_PHY_TBL_CHG_ADDR 0xaeeddeea #define DDR_PHY_TBL_END 0xaeededed +/** + * phyr030[18:16] - Ron PU (PHY side) + * phyr030[14:12] - Ron PD (PHY side) + * b'000 : disable + * b'001 : 240 ohm + * b'010 : 120 ohm + * b'011 : 80 ohm + * b'100 : 60 ohm + * b'101 : 48 ohm + * b'110 : 40 ohm + * b'111 : 34 ohm (default) + */ +#define PHY_RON ((0x7 << 16) | (0x7 << 12)) + +/** + * phyr030[10:8] - ODT configuration (PHY side) + * b'000 : ODT disabled + * b'001 : 240 ohm + * b'010 : 120 ohm + * b'011 : 80 ohm (default) + * b'100 : 60 ohm + * b'101 : 48 ohm + * b'110 : 40 ohm + * b'111 : 34 ohm + */ +#define PHY_ODT (0x3 << 8) + +/** + * MR1[2:1] output driver impedance + * b'00 : 34 ohm (default) + * b'01 : 48 ohm + */ +#define DRAM_RON (0x0 << 1) + +/** + * DRAM ODT - synchronous ODT mode + * RTT_WR: disable + * RTT_NOM = RTT_PARK + * + * MR1[10:8] RTT_NOM + * b'000 : RTT_NOM disable + * b'001 : 60 ohm + * b'010 : 120 ohm + * b'011 : 40 ohm + * b'100 : 240 ohm + * b'101 : 48 ohm (default) + * b'110 : 80 ohm + * b'111 : 34 ohm + * + * MR5[8:6] RTT_PARK + * b'000 : RTT_PARK disable + * b'001 : 60 ohm + * b'010 : 120 ohm + * b'011 : 40 ohm + * b'100 : 240 ohm + * b'101 : 48 ohm (default) + * b'110 : 80 ohm + * b'111 : 34 ohm + * + * MR2[11:9] RTT_WR + * b'000 : Dynamic ODT off (default) + * b'001 : 120 ohm + * b'010 : 240 ohm + * b'011 : Hi-Z + * b'100 : 80 ohm + */ +#define RTT_WR (0x0 << 9) +#define RTT_NOM (0x5 << 8) +#define RTT_PARK (0x5 << 6) + +/** + * MR6[6] VrefDQ training range + * b'0 : range 1 + * b'1 : range 2 (default) + */ +#define VREFDQ_RANGE_2 BIT(6) + +/** + * Latency setting: + * AL = PL = 0 (hardware fixed setting) + * -> WL = AL + CWL + PL = CWL + * -> RL = AL + CL + PL = CL + */ +#define CONFIG_WL 9 +#define CONFIG_RL 12 +#define T_RDDATA_EN ((CONFIG_RL - 2) << 8) +#define T_PHY_WRLAT (CONFIG_WL - 2) + +/* MR0 */ +#define MR0_CL_12 (BIT(4) | BIT(2)) +#define MR0_WR12_RTP6 BIT(9) +#define MR0_DLL_RESET BIT(8) +#define MR0_VAL (MR0_CL_12 | MR0_WR12_RTP6 | MR0_DLL_RESET) + +/* MR1 */ +#define MR1_VAL (0x0001 | RTT_NOM | DRAM_RON) + +/* MR2 */ +#define MR2_CWL_9 0 +#define MR2_VAL (0x0000 | RTT_WR | MR2_CWL_9) + +/* MR3 ~ MR6 */ +#define MR3_VAL 0x0000 +#define MR4_VAL 0x0000 +#define MR5_VAL (0x0400 | RTT_PARK) +#define MR6_VAL 0x0400 + +/** + * The offset value applied to the DDR PHY write data eye training result + * to fine-tune the write DQ/DQS alignment + */ +#define WR_DATA_EYE_OFFSET (0x10 << 8) + #if defined(CONFIG_ASPEED_DDR4_800) u32 ast2600_sdramphy_config[165] = { 0x1e6e0100, // start address @@ -35,7 +148,7 @@ u32 ast2600_sdramphy_config[165] = { 0x20000000, // phyr024 0x00000008, // phyr028 0x00000000, // phyr02c - 0x00077600, // phyr030 + (PHY_RON | PHY_ODT), /* phyr030 */ 0x00000000, // phyr034 0x00000000, // phyr038 0x20000000, // phyr03c @@ -44,18 +157,18 @@ u32 ast2600_sdramphy_config[165] = { 0x00002f07, // phyr048 0x00003080, // phyr04c 0x04000000, // phyr050 - 0x00000200, // phyr054 - 0x03140201, // phyr058 - 0x04800000, // phyr05c - 0x0800044e, // phyr060 + ((MR3_VAL << 16) | MR2_VAL), /* phyr054 */ + ((MR0_VAL << 16) | MR1_VAL), /* phyr058 */ + ((MR5_VAL << 16) | MR4_VAL), /* phyr05c */ + ((0x0800 << 16) | MR6_VAL | VREFDQ_RANGE_2 | 0xe), /* phyr060 */ 0x00000000, // phyr064 0x00180008, // phyr068 0x00e00400, // phyr06c 0x00140206, // phyr070 0x1d4c0000, // phyr074 - 0x493e0107, // phyr078 + (0x493e0100 | T_PHY_WRLAT), /* phyr078 */ 0x08060404, // phyr07c - 0x90000a00, // phyr080 + (0x90000000 | T_RDDATA_EN), /* phyr080 */ 0x06420618, // phyr084 0x00001002, // phyr088 0x05701016, // phyr08c @@ -94,7 +207,7 @@ u32 ast2600_sdramphy_config[165] = { 0x20202020, // phyr09c 0x20202020, // phyr0a0 0x00002020, // phyr0a4 - 0x80000000, // phyr0a8 + 0x00000000, /* phyr0a8 */ 0x00000001, // phyr0ac 0xaeeddeea, // change address 0x1e6e0318, // new address @@ -154,7 +267,7 @@ u32 ast2600_sdramphy_config[165] = { 0x20202020, // phyr170 0xaeeddeea, // change address 0x1e6e0298, // new address - 0x20200800, // phyr198 + 0x20200000, /* phyr198 */ 0x20202020, // phyr19c 0x20202020, // phyr1a0 0x20202020, // phyr1a4 @@ -177,7 +290,7 @@ u32 ast2600_sdramphy_config[165] = { 0x00002020, // phyr1e8 0xaeeddeea, // change address 0x1e6e0304, // new address - 0x00000800, // phyr204 + (0x00000001 | WR_DATA_EYE_OFFSET), /* phyr204 */ 0xaeeddeea, // change address 0x1e6e027c, // new address 0x4e400000, // phyr17c @@ -203,7 +316,7 @@ u32 ast2600_sdramphy_config[165] = { 0x20000000, // phyr024 0x00000008, // phyr028 0x00000000, // phyr02c - 0x00077600, // phyr030 + (PHY_RON | PHY_ODT), /* phyr030 */ 0x00000000, // phyr034 0x00000000, // phyr038 0x20000000, // phyr03c @@ -212,18 +325,18 @@ u32 ast2600_sdramphy_config[165] = { 0x00002f07, // phyr048 0x00003080, // phyr04c 0x04000000, // phyr050 - 0x00000200, // phyr054 - 0x03140501, // phyr058-rtt:40 - 0x04800000, // phyr05c - 0x0800044e, // phyr060 + ((MR3_VAL << 16) | MR2_VAL), /* phyr054 */ + ((MR0_VAL << 16) | MR1_VAL), /* phyr058 */ + ((MR5_VAL << 16) | MR4_VAL), /* phyr05c */ + ((0x0800 << 16) | MR6_VAL | VREFDQ_RANGE_2 | 0xe), /* phyr060 */ 0x00000000, // phyr064 0x00180008, // phyr068 0x00e00400, // phyr06c 0x00140206, // phyr070 0x1d4c0000, // phyr074 - 0x493e0107, // phyr078 + (0x493e0100 | T_PHY_WRLAT), /* phyr078 */ 0x08060404, // phyr07c - 0x90000a00, // phyr080 + (0x90000000 | T_RDDATA_EN), /* phyr080 */ 0x06420c30, // phyr084 0x00001002, // phyr088 0x05701016, // phyr08c @@ -256,13 +369,13 @@ u32 ast2600_sdramphy_config[165] = { 0x00000000, // phyr200 0xaeeddeea, // change address 0x1e6e0194, // new address - 0x801112e0, // phyr094 - bit12=1,15=0,- write window is ok + 0x801112e0, // phyr094 0xaeeddeea, // change address 0x1e6e019c, // new address 0x20202020, // phyr09c 0x20202020, // phyr0a0 0x00002020, // phyr0a4 - 0x80000000, // phyr0a8 + 0x00000000, /* phyr0a8 */ 0x00000001, // phyr0ac 0xaeeddeea, // change address 0x1e6e0318, // new address @@ -322,7 +435,7 @@ u32 ast2600_sdramphy_config[165] = { 0x20202020, // phyr170 0xaeeddeea, // change address 0x1e6e0298, // new address - 0x20200800, // phyr198 + 0x20200000, /* phyr198 */ 0x20202020, // phyr19c 0x20202020, // phyr1a0 0x20202020, // phyr1a4 @@ -345,7 +458,7 @@ u32 ast2600_sdramphy_config[165] = { 0x00002020, // phyr1e8 0xaeeddeea, // change address 0x1e6e0304, // new address - 0x00000800, // phyr204 + (0x00000001 | WR_DATA_EYE_OFFSET), /* phyr204 */ 0xaeeddeea, // change address 0x1e6e027c, // new address 0x4e400000, // phyr17c @@ -388,10 +501,10 @@ u32 ast2600_sdramphy_config[165] = { * AC timing and SDRAM mode register setting * for real chip are derived from the model GDDR4-1600 */ -#define DDR4_MR01_MODE 0x03010510 -#define DDR4_MR23_MODE 0x00000000 -#define DDR4_MR45_MODE 0x04000000 -#define DDR4_MR6_MODE 0x00000400 +#define DDR4_MR01_MODE ((MR1_VAL << 16) | MR0_VAL) +#define DDR4_MR23_MODE ((MR3_VAL << 16) | MR2_VAL) +#define DDR4_MR45_MODE ((MR5_VAL << 16) | MR4_VAL) +#define DDR4_MR6_MODE MR6_VAL #define DDR4_TRFC_1600 0x467299f1 #define DDR4_TRFC_1333 0x3a5f80c9 #define DDR4_TRFC_800 0x23394c78 |