diff options
Diffstat (limited to 'board/mpl/common/usb_uhci.h')
| -rw-r--r-- | board/mpl/common/usb_uhci.h | 171 |
1 files changed, 0 insertions, 171 deletions
diff --git a/board/mpl/common/usb_uhci.h b/board/mpl/common/usb_uhci.h deleted file mode 100644 index 582015f91a..0000000000 --- a/board/mpl/common/usb_uhci.h +++ /dev/null @@ -1,171 +0,0 @@ -/* - * (C) Copyright 2001 - * Denis Peter, MPL AG Switzerland - * - * SPDX-License-Identifier: GPL-2.0+ - * - * Note: Part of this code has been derived from linux - */ -#ifndef _USB_UHCI_H_ -#define _USB_UHCI_H_ - - -/* Command register */ -#define USBCMD 0 -#define USBCMD_RS 0x0001 /* Run/Stop */ -#define USBCMD_HCRESET 0x0002 /* Host reset */ -#define USBCMD_GRESET 0x0004 /* Global reset */ -#define USBCMD_EGSM 0x0008 /* Global Suspend Mode */ -#define USBCMD_FGR 0x0010 /* Force Global Resume */ -#define USBCMD_SWDBG 0x0020 /* SW Debug mode */ -#define USBCMD_CF 0x0040 /* Config Flag (sw only) */ -#define USBCMD_MAXP 0x0080 /* Max Packet (0 = 32, 1 = 64) */ - -/* Status register */ -#define USBSTS 2 -#define USBSTS_USBINT 0x0001 /* Interrupt due to IOC */ -#define USBSTS_ERROR 0x0002 /* Interrupt due to error */ -#define USBSTS_RD 0x0004 /* Resume Detect */ -#define USBSTS_HSE 0x0008 /* Host System Error - basically PCI problems */ -#define USBSTS_HCPE 0x0010 /* Host Controller Process Error - the scripts were buggy */ -#define USBSTS_HCH 0x0020 /* HC Halted */ - -/* Interrupt enable register */ -#define USBINTR 4 -#define USBINTR_TIMEOUT 0x0001 /* Timeout/CRC error enable */ -#define USBINTR_RESUME 0x0002 /* Resume interrupt enable */ -#define USBINTR_IOC 0x0004 /* Interrupt On Complete enable */ -#define USBINTR_SP 0x0008 /* Short packet interrupt enable */ - -#define USBFRNUM 6 -#define USBFLBASEADD 8 -#define USBSOF 12 - -/* USB port status and control registers */ -#define USBPORTSC1 16 -#define USBPORTSC2 18 -#define USBPORTSC_CCS 0x0001 /* Current Connect Status ("device present") */ -#define USBPORTSC_CSC 0x0002 /* Connect Status Change */ -#define USBPORTSC_PE 0x0004 /* Port Enable */ -#define USBPORTSC_PEC 0x0008 /* Port Enable Change */ -#define USBPORTSC_LS 0x0030 /* Line Status */ -#define USBPORTSC_RD 0x0040 /* Resume Detect */ -#define USBPORTSC_LSDA 0x0100 /* Low Speed Device Attached */ -#define USBPORTSC_PR 0x0200 /* Port Reset */ -#define USBPORTSC_SUSP 0x1000 /* Suspend */ - -/* Legacy support register */ -#define USBLEGSUP 0xc0 -#define USBLEGSUP_DEFAULT 0x2000 /* only PIRQ enable set */ - -#define UHCI_NULL_DATA_SIZE 0x7ff /* for UHCI controller TD */ -#define UHCI_PID 0xff /* PID MASK */ - -#define UHCI_PTR_BITS 0x000F -#define UHCI_PTR_TERM 0x0001 -#define UHCI_PTR_QH 0x0002 -#define UHCI_PTR_DEPTH 0x0004 - -/* for TD <status>: */ -#define TD_CTRL_SPD (1 << 29) /* Short Packet Detect */ -#define TD_CTRL_C_ERR_MASK (3 << 27) /* Error Counter bits */ -#define TD_CTRL_LS (1 << 26) /* Low Speed Device */ -#define TD_CTRL_IOS (1 << 25) /* Isochronous Select */ -#define TD_CTRL_IOC (1 << 24) /* Interrupt on Complete */ -#define TD_CTRL_ACTIVE (1 << 23) /* TD Active */ -#define TD_CTRL_STALLED (1 << 22) /* TD Stalled */ -#define TD_CTRL_DBUFERR (1 << 21) /* Data Buffer Error */ -#define TD_CTRL_BABBLE (1 << 20) /* Babble Detected */ -#define TD_CTRL_NAK (1 << 19) /* NAK Received */ -#define TD_CTRL_CRCTIMEO (1 << 18) /* CRC/Time Out Error */ -#define TD_CTRL_BITSTUFF (1 << 17) /* Bit Stuff Error */ -#define TD_CTRL_ACTLEN_MASK 0x7ff /* actual length, encoded as n - 1 */ - -#define TD_CTRL_ANY_ERROR (TD_CTRL_STALLED | TD_CTRL_DBUFERR | \ - TD_CTRL_BABBLE | TD_CTRL_CRCTIME | TD_CTRL_BITSTUFF) - -#define TD_TOKEN_TOGGLE 19 - -/* ------------------------------------------------------------------------------------ - Virtual Root HUB - ------------------------------------------------------------------------------------ */ -/* destination of request */ -#define RH_INTERFACE 0x01 -#define RH_ENDPOINT 0x02 -#define RH_OTHER 0x03 - -#define RH_CLASS 0x20 -#define RH_VENDOR 0x40 - -/* Requests: bRequest << 8 | bmRequestType */ -#define RH_GET_STATUS 0x0080 -#define RH_CLEAR_FEATURE 0x0100 -#define RH_SET_FEATURE 0x0300 -#define RH_SET_ADDRESS 0x0500 -#define RH_GET_DESCRIPTOR 0x0680 -#define RH_SET_DESCRIPTOR 0x0700 -#define RH_GET_CONFIGURATION 0x0880 -#define RH_SET_CONFIGURATION 0x0900 -#define RH_GET_STATE 0x0280 -#define RH_GET_INTERFACE 0x0A80 -#define RH_SET_INTERFACE 0x0B00 -#define RH_SYNC_FRAME 0x0C80 -/* Our Vendor Specific Request */ -#define RH_SET_EP 0x2000 - -/* Hub port features */ -#define RH_PORT_CONNECTION 0x00 -#define RH_PORT_ENABLE 0x01 -#define RH_PORT_SUSPEND 0x02 -#define RH_PORT_OVER_CURRENT 0x03 -#define RH_PORT_RESET 0x04 -#define RH_PORT_POWER 0x08 -#define RH_PORT_LOW_SPEED 0x09 -#define RH_C_PORT_CONNECTION 0x10 -#define RH_C_PORT_ENABLE 0x11 -#define RH_C_PORT_SUSPEND 0x12 -#define RH_C_PORT_OVER_CURRENT 0x13 -#define RH_C_PORT_RESET 0x14 - -/* Hub features */ -#define RH_C_HUB_LOCAL_POWER 0x00 -#define RH_C_HUB_OVER_CURRENT 0x01 - -#define RH_DEVICE_REMOTE_WAKEUP 0x00 -#define RH_ENDPOINT_STALL 0x01 - -/* Our Vendor Specific feature */ -#define RH_REMOVE_EP 0x00 - - -#define RH_ACK 0x01 -#define RH_REQ_ERR -1 -#define RH_NACK 0x00 - - -/* Transfer descriptor structure */ -typedef struct { - unsigned long link; /* next td/qh (LE)*/ - unsigned long status; /* status of the td */ - unsigned long info; /* Max Lenght / Endpoint / device address and PID */ - unsigned long buffer; /* pointer to data buffer (LE) */ - unsigned long dev_ptr; /* pointer to the assigned device (BE) */ - unsigned long res[3]; /* reserved (TDs must be 8Byte aligned) */ -} uhci_td_t, *puhci_td_t; - -/* Queue Header structure */ -typedef struct { - unsigned long head; /* Next QH (LE)*/ - unsigned long element; /* Queue element pointer (LE) */ - unsigned long res[5]; /* reserved */ - unsigned long dev_ptr; /* if 0 no tds have been assigned to this qh */ -} uhci_qh_t, *puhci_qh_t; - -struct virt_root_hub { - int devnum; /* Address of Root Hub endpoint */ - int numports; /* number of ports */ - int c_p_r[8]; /* C_PORT_RESET */ -}; - - -#endif /* _USB_UHCI_H_ */ |