diff options
588 files changed, 10151 insertions, 8002 deletions
@@ -143,7 +143,7 @@ W: www.freescale.com N: Dr. Wolfgang Grandegger E: wg@denx.de -D: Support for Interphase 4539 T1/E1/J1 PMC, PN62, CCM, SCM boards +D: Support for Interphase 4539 T1/E1/J1 PMC, CCM, SCM boards W: www.denx.de N: Peter Figuli @@ -18,6 +18,7 @@ usage() -c CPU, --cpu CPU Build all boards with cpu CPU -v VENDOR, --vendor VENDOR Build all boards with vendor VENDOR -s SOC, --soc SOC Build all boards with soc SOC + -b BOARD, --board BOARD Build all boards with board name BOARD -l, --list List all targets to be built -m, --maintainers List all targets and maintainer email -M, --mails List all targets and all affilated emails @@ -59,8 +60,8 @@ usage() exit ${ret} } -SHORT_OPTS="ha:c:v:s:lmMCnr" -LONG_OPTS="help,arch:,cpu:,vendor:,soc:,list,maintainers,mails,check,continue,rebuild-errors" +SHORT_OPTS="ha:c:v:s:b:lmMCnr" +LONG_OPTS="help,arch:,cpu:,vendor:,soc:,board:,list,maintainers,mails,check,continue,rebuild-errors" # Option processing based on util-linux-2.13/getopt-parse.bash @@ -121,6 +122,17 @@ while true ; do fi SELECTED='y' shift 2 ;; + -b|--board) + # echo "Option BOARD: argument \`$2'" + if [ "$opt_b" ] ; then + opt_b="${opt_b%)} || \$6 == \"$2\" || \$7 == \"$2\")" + else + # We need to check the 7th field too + # for boards whose 6th field is "-" + opt_b="(\$6 == \"$2\" || \$7 == \"$2\")" + fi + SELECTED='y' + shift 2 ;; -C|--check) CHECK='C=1' shift ;; @@ -158,6 +170,7 @@ FILTER="\$1 !~ /^#/" [ "$opt_c" ] && FILTER="${FILTER} && $opt_c" [ "$opt_s" ] && FILTER="${FILTER} && $opt_s" [ "$opt_v" ] && FILTER="${FILTER} && $opt_v" +[ "$opt_b" ] && FILTER="${FILTER} && $opt_b" if [ "$SELECTED" ] ; then SELECTED=$(awk '('"$FILTER"') { print $7 }' boards.cfg) @@ -5,10 +5,10 @@ # SPDX-License-Identifier: GPL-2.0+ # -VERSION = 2013 -PATCHLEVEL = 10 +VERSION = 2014 +PATCHLEVEL = 01 SUBLEVEL = -EXTRAVERSION = +EXTRAVERSION = -rc1 ifneq "$(SUBLEVEL)" "" U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION) else @@ -65,11 +65,9 @@ endif # the object files are placed in the source directory. # -ifdef O ifeq ("$(origin O)", "command line") BUILD_DIR := $(O) endif -endif # Call a source code checker (by default, "sparse") as part of the # C compilation. @@ -138,7 +136,6 @@ unexport CDPATH # The "examples" conditionally depend on U-Boot (say, when USE_PRIVATE_LIBGCC # is "yes"), so compile examples after U-Boot is compiled. SUBDIR_TOOLS = tools -SUBDIR_EXAMPLES = examples/standalone examples/api SUBDIRS = $(SUBDIR_TOOLS) .PHONY : $(SUBDIRS) $(VERSION_FILE) $(TIMESTAMP_FILE) @@ -152,8 +149,10 @@ all: sinclude $(obj)include/autoconf.mk.dep sinclude $(obj)include/autoconf.mk +SUBDIR_EXAMPLES-y := examples/standalone +SUBDIR_EXAMPLES-$(CONFIG_API) += examples/api ifndef CONFIG_SANDBOX -SUBDIRS += $(SUBDIR_EXAMPLES) +SUBDIRS += $(SUBDIR_EXAMPLES-y) endif # load ARCH, BOARD, and CPU configuration @@ -231,87 +230,67 @@ OBJS := $(addprefix $(obj),$(OBJS)) HAVE_VENDOR_COMMON_LIB = $(if $(wildcard board/$(VENDOR)/common/Makefile),y,n) -LIBS-y += lib/libgeneric.o -LIBS-y += lib/rsa/librsa.o -LIBS-y += lib/lzma/liblzma.o -LIBS-y += lib/lzo/liblzo.o -LIBS-y += lib/zlib/libz.o -LIBS-$(CONFIG_TIZEN) += lib/tizen/libtizen.o -LIBS-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/lib$(VENDOR).o -LIBS-y += $(CPUDIR)/lib$(CPU).o +LIBS-y += lib/ +LIBS-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/ +LIBS-y += $(CPUDIR)/ ifdef SOC -LIBS-y += $(CPUDIR)/$(SOC)/lib$(SOC).o -endif -ifeq ($(CPU),ixp) -LIBS-y += drivers/net/npe/libnpe.o -endif -LIBS-$(CONFIG_OF_EMBED) += dts/libdts.o -LIBS-y += arch/$(ARCH)/lib/lib$(ARCH).o -LIBS-y += fs/libfs.o \ - fs/fat/libfat.o -LIBS-y += net/libnet.o -LIBS-y += disk/libdisk.o -LIBS-y += drivers/libdrivers.o -LIBS-y += drivers/dma/libdma.o -LIBS-y += drivers/gpio/libgpio.o -LIBS-y += drivers/i2c/libi2c.o -LIBS-y += drivers/input/libinput.o -LIBS-y += drivers/mmc/libmmc.o -LIBS-y += drivers/mtd/libmtd.o -LIBS-y += drivers/mtd/nand/libnand.o -LIBS-y += drivers/mtd/onenand/libonenand.o -LIBS-y += drivers/mtd/ubi/libubi.o -LIBS-y += drivers/mtd/spi/libspi_flash.o -LIBS-y += drivers/net/libnet.o -LIBS-y += drivers/net/phy/libphy.o -LIBS-y += drivers/pci/libpci.o -LIBS-y += drivers/power/libpower.o \ - drivers/power/fuel_gauge/libfuel_gauge.o \ - drivers/power/mfd/libmfd.o \ - drivers/power/pmic/libpmic.o \ - drivers/power/battery/libbattery.o -LIBS-y += drivers/spi/libspi.o -ifeq ($(CPU),mpc83xx) -LIBS-y += drivers/qe/libqe.o -LIBS-y += arch/powerpc/cpu/mpc8xxx/ddr/libddr.o -LIBS-y += arch/powerpc/cpu/mpc8xxx/lib8xxx.o -endif -ifeq ($(CPU),mpc85xx) -LIBS-y += drivers/qe/libqe.o -LIBS-y += drivers/net/fm/libfm.o -LIBS-y += arch/powerpc/cpu/mpc8xxx/ddr/libddr.o -LIBS-y += arch/powerpc/cpu/mpc8xxx/lib8xxx.o -endif -ifeq ($(CPU),mpc86xx) -LIBS-y += arch/powerpc/cpu/mpc8xxx/ddr/libddr.o -LIBS-y += arch/powerpc/cpu/mpc8xxx/lib8xxx.o -endif -LIBS-y += drivers/serial/libserial.o -LIBS-y += drivers/usb/eth/libusb_eth.o -LIBS-y += drivers/usb/gadget/libusb_gadget.o -LIBS-y += drivers/usb/host/libusb_host.o -LIBS-y += drivers/usb/musb/libusb_musb.o -LIBS-y += drivers/usb/musb-new/libusb_musb-new.o -LIBS-y += drivers/usb/phy/libusb_phy.o -LIBS-y += drivers/usb/ulpi/libusb_ulpi.o -LIBS-y += common/libcommon.o -LIBS-y += lib/libfdt/libfdt.o -LIBS-y += api/libapi.o -LIBS-y += post/libpost.o -LIBS-y += test/libtest.o +LIBS-y += $(CPUDIR)/$(SOC)/ +endif +LIBS-$(CONFIG_IXP4XX_NPE) += drivers/net/npe/ +LIBS-$(CONFIG_OF_EMBED) += dts/ +LIBS-y += arch/$(ARCH)/lib/ +LIBS-y += fs/ +LIBS-y += net/ +LIBS-y += disk/ +LIBS-y += drivers/ +LIBS-y += drivers/dma/ +LIBS-y += drivers/gpio/ +LIBS-y += drivers/i2c/ +LIBS-y += drivers/input/ +LIBS-y += drivers/mmc/ +LIBS-y += drivers/mtd/ +LIBS-y += drivers/mtd/nand/ +LIBS-y += drivers/mtd/onenand/ +LIBS-y += drivers/mtd/ubi/ +LIBS-y += drivers/mtd/spi/ +LIBS-y += drivers/net/ +LIBS-y += drivers/net/phy/ +LIBS-y += drivers/pci/ +LIBS-y += drivers/power/ \ + drivers/power/fuel_gauge/ \ + drivers/power/mfd/ \ + drivers/power/pmic/ \ + drivers/power/battery/ +LIBS-y += drivers/spi/ +LIBS-$(CONFIG_FMAN_ENET) += drivers/net/fm/ +LIBS-$(CONFIG_SYS_FSL_DDR) += drivers/ddr/fsl/ +LIBS-y += drivers/serial/ +LIBS-y += drivers/usb/eth/ +LIBS-y += drivers/usb/gadget/ +LIBS-y += drivers/usb/host/ +LIBS-y += drivers/usb/musb/ +LIBS-y += drivers/usb/musb-new/ +LIBS-y += drivers/usb/phy/ +LIBS-y += drivers/usb/ulpi/ +LIBS-y += common/ +LIBS-y += lib/libfdt/ +LIBS-$(CONFIG_API) += api/ +LIBS-y += post/ +LIBS-y += test/ ifneq (,$(filter $(SOC), mx25 mx27 mx5 mx6 mx31 mx35 mxs vf610)) -LIBS-y += arch/$(ARCH)/imx-common/libimx-common.o +LIBS-y += arch/$(ARCH)/imx-common/ endif -LIBS-$(CONFIG_ARM) += arch/arm/cpu/libcpu.o +LIBS-$(CONFIG_ARM) += arch/arm/cpu/ +LIBS-$(CONFIG_PPC) += arch/powerpc/cpu/ + +LIBS-y += board/$(BOARDDIR)/ +LIBS-y := $(patsubst %/, %/built-in.o, $(LIBS-y)) LIBS := $(addprefix $(obj),$(sort $(LIBS-y))) .PHONY : $(LIBS) -LIBBOARD = board/$(BOARDDIR)/lib$(BOARD).o -LIBBOARD := $(addprefix $(obj),$(LIBBOARD)) - # Add GCC lib ifdef USE_PRIVATE_LIBGCC ifeq ("$(USE_PRIVATE_LIBGCC)", "yes") @@ -335,7 +314,7 @@ LDPPFLAGS += \ sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p') __OBJS := $(subst $(obj),,$(OBJS)) -__LIBS := $(subst $(obj),,$(LIBS)) $(subst $(obj),,$(LIBBOARD)) +__LIBS := $(subst $(obj),,$(LIBS)) ######################################################################### ######################################################################### @@ -380,7 +359,7 @@ endif build := -f $(TOPDIR)/scripts/Makefile.build -C -all: $(ALL-y) $(SUBDIR_EXAMPLES) +all: $(ALL-y) $(SUBDIR_EXAMPLES-y) $(obj)u-boot.dtb: checkdtc $(obj)u-boot $(MAKE) $(build) dts binary @@ -549,7 +528,7 @@ GEN_UBOOT = \ endif $(obj)u-boot: depend \ - $(SUBDIR_TOOLS) $(OBJS) $(LIBBOARD) $(LIBS) $(LDSCRIPT) $(obj)u-boot.lds + $(SUBDIR_TOOLS) $(OBJS) $(LIBS) $(LDSCRIPT) $(obj)u-boot.lds $(GEN_UBOOT) ifeq ($(CONFIG_KALLSYMS),y) smap=`$(call SYSTEM_MAP,$(obj)u-boot) | \ @@ -564,16 +543,11 @@ $(OBJS): $(LIBS): depend $(SUBDIR_TOOLS) $(MAKE) $(build) $(dir $(subst $(obj),,$@)) - mv $(dir $@)built-in.o $@ - -$(LIBBOARD): depend $(LIBS) - $(MAKE) $(build) $(dir $(subst $(obj),,$@)) - mv $(dir $@)built-in.o $@ $(SUBDIRS): depend $(MAKE) -C $@ all -$(SUBDIR_EXAMPLES): $(obj)u-boot +$(SUBDIR_EXAMPLES-y): $(obj)u-boot $(LDSCRIPT): depend $(MAKE) -C $(dir $@) $(notdir $@) @@ -593,9 +567,6 @@ $(obj)spl/u-boot-spl.bin: $(SUBDIR_TOOLS) depend $(obj)tpl/u-boot-tpl.bin: $(SUBDIR_TOOLS) depend $(MAKE) -C spl all CONFIG_TPL_BUILD=y -updater: - $(MAKE) -C tools/updater all - # Explicitly make _depend in subdirs containing multiple targets to prevent # parallel sub-makes creating .depend files simultaneously. depend dep: $(TIMESTAMP_FILE) $(VERSION_FILE) \ @@ -634,7 +605,7 @@ SYSTEM_MAP = \ grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \ LC_ALL=C sort $(obj)System.map: $(obj)u-boot - @$(call SYSTEM_MAP,$<) > $(obj)System.map + @$(call SYSTEM_MAP,$<) > $@ checkthumb: @if test $(call cc-version) -lt 0404; then \ @@ -738,7 +709,7 @@ else # !config.mk all $(obj)u-boot.hex $(obj)u-boot.srec $(obj)u-boot.bin \ $(obj)u-boot.img $(obj)u-boot.dis $(obj)u-boot \ $(filter-out tools,$(SUBDIRS)) \ -updater depend dep tags ctags etags cscope $(obj)System.map: +depend dep tags ctags etags cscope $(obj)System.map: @echo "System not configured - see README" >&2 @ exit 1 @@ -806,12 +777,6 @@ sinclude $(obj).boards.depend $(obj).boards.depend: boards.cfg @awk '(NF && $$1 !~ /^#/) { print $$7 ": " $$7 "_config; $$(MAKE)" }' $< > $@ -# -# Functions to generate common board directory names -# -lcname = $(shell echo $(1) | sed -e 's/\(.*\)_config/\L\1/') -ucname = $(shell echo $(1) | sed -e 's/\(.*\)_config/\U\1/') - ######################################################################### ######################################################################### @@ -888,8 +853,6 @@ clobber: tidy @rm -f $(obj)MLO MLO.byteswap @rm -f $(obj)SPL @rm -f $(obj)tools/xway-swap-bytes - @rm -f $(obj)arch/powerpc/cpu/mpc824x/bedbug_603e.c - @rm -f $(obj)arch/powerpc/cpu/mpc83xx/ddr-gen?.c @rm -fr $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm @rm -fr $(obj)include/generated @[ ! -d $(obj)nand_spl ] || find $(obj)nand_spl -name "*" -type l -print | xargs rm -f @@ -423,16 +423,50 @@ The following options need to be configured: CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT This value denotes start offset of DSP CCSR space. - CONFIG_SYS_FSL_DDR_EMU - Specify emulator support for DDR. Some DDR features such as - deskew training are not available. - - Generic CPU options: CONFIG_SYS_BIG_ENDIAN, CONFIG_SYS_LITTLE_ENDIAN Defines the endianess of the CPU. Implementation of those values is arch specific. + CONFIG_SYS_FSL_DDR + Freescale DDR driver in use. This type of DDR controller is + found in mpc83xx, mpc85xx, mpc86xx as well as some ARM core + SoCs. + + CONFIG_SYS_FSL_DDR_ADDR + Freescale DDR memory-mapped register base. + + CONFIG_SYS_FSL_DDR_EMU + Specify emulator support for DDR. Some DDR features such as + deskew training are not available. + + CONFIG_SYS_FSL_DDRC_GEN1 + Freescale DDR1 controller. + + CONFIG_SYS_FSL_DDRC_GEN2 + Freescale DDR2 controller. + + CONFIG_SYS_FSL_DDRC_GEN3 + Freescale DDR3 controller. + + CONFIG_SYS_FSL_DDRC_ARM_GEN3 + Freescale DDR3 controller for ARM-based SoCs. + + CONFIG_SYS_FSL_DDR1 + Board config to use DDR1. It can be enabled for SoCs with + Freescale DDR1 or DDR2 controllers, depending on the board + implemetation. + + CONFIG_SYS_FSL_DDR2 + Board config to use DDR2. It can be eanbeld for SoCs with + Freescale DDR2 or DDR3 controllers, depending on the board + implementation. + + CONFIG_SYS_FSL_DDR3 + Board config to use DDR3. It can be enabled for SoCs with + Freescale DDR3 controllers. + - Intel Monahans options: CONFIG_SYS_MONAHANS_RUN_MODE_OSC_RATIO @@ -1979,6 +2013,21 @@ CBFS (Coreboot Filesystem) support kernel). Defining CONFIG_STATUS_LED enables this feature in U-Boot. + Additional options: + + CONFIG_GPIO_LED + The status LED can be connected to a GPIO pin. + In such cases, the gpio_led driver can be used as a + status LED backend implementation. Define CONFIG_GPIO_LED + to include the gpio_led driver in the U-Boot binary. + + CONFIG_GPIO_LED_INVERTED_TABLE + Some GPIO connected LEDs may have inverted polarity in which + case the GPIO high value corresponds to LED off state and + GPIO low value corresponds to LED on state. + In such cases CONFIG_GPIO_LED_INVERTED_TABLE may be defined + with a list of GPIO LEDs that have inverted polarity. + - CAN Support: CONFIG_CAN_DRIVER Defining CONFIG_CAN_DRIVER enables CAN driver support @@ -2056,6 +2105,42 @@ CBFS (Coreboot Filesystem) support - CONFIG_SYS_RCAR_I2C3_SPEED for for the speed channel 3 - CONFIF_SYS_RCAR_I2C_NUM_CONTROLLERS for number of i2c buses + - drivers/i2c/sh_i2c.c: + - activate this driver with CONFIG_SYS_I2C_SH + - This driver adds from 2 to 5 i2c buses + + - CONFIG_SYS_I2C_SH_BASE0 for setting the register channel 0 + - CONFIG_SYS_I2C_SH_SPEED0 for for the speed channel 0 + - CONFIG_SYS_I2C_SH_BASE1 for setting the register channel 1 + - CONFIG_SYS_I2C_SH_SPEED1 for for the speed channel 1 + - CONFIG_SYS_I2C_SH_BASE2 for setting the register channel 2 + - CONFIG_SYS_I2C_SH_SPEED2 for for the speed channel 2 + - CONFIG_SYS_I2C_SH_BASE3 for setting the register channel 3 + - CONFIG_SYS_I2C_SH_SPEED3 for for the speed channel 3 + - CONFIG_SYS_I2C_SH_BASE4 for setting the register channel 4 + - CONFIG_SYS_I2C_SH_SPEED4 for for the speed channel 4 + - CONFIG_SYS_I2C_SH_BASE5 for setting the register channel 5 + - CONFIG_SYS_I2C_SH_SPEED5 for for the speed channel 5 + - CONFIF_SYS_I2C_SH_NUM_CONTROLLERS for nummber of i2c buses + + - drivers/i2c/omap24xx_i2c.c + - activate this driver with CONFIG_SYS_I2C_OMAP24XX + - CONFIG_SYS_OMAP24_I2C_SPEED speed channel 0 + - CONFIG_SYS_OMAP24_I2C_SLAVE slave addr channel 0 + - CONFIG_SYS_OMAP24_I2C_SPEED1 speed channel 1 + - CONFIG_SYS_OMAP24_I2C_SLAVE1 slave addr channel 1 + - CONFIG_SYS_OMAP24_I2C_SPEED2 speed channel 2 + - CONFIG_SYS_OMAP24_I2C_SLAVE2 slave addr channel 2 + - CONFIG_SYS_OMAP24_I2C_SPEED3 speed channel 3 + - CONFIG_SYS_OMAP24_I2C_SLAVE3 slave addr channel 3 + - CONFIG_SYS_OMAP24_I2C_SPEED4 speed channel 4 + - CONFIG_SYS_OMAP24_I2C_SLAVE4 slave addr channel 4 + + - drivers/i2c/zynq_i2c.c + - activate this driver with CONFIG_SYS_I2C_ZYNQ + - set CONFIG_SYS_I2C_ZYNQ_SPEED for speed setting + - set CONFIG_SYS_I2C_ZYNQ_SLAVE for slave addr + additional defines: CONFIG_SYS_NUM_I2C_BUSES @@ -3162,7 +3247,7 @@ FIT uImage format: CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT Set for the SPL on PPC mpc8xxx targets, support for - arch/powerpc/cpu/mpc8xxx/ddr/libddr.o in SPL binary. + drivers/ddr/fsl/libddr.o in SPL binary. CONFIG_SPL_COMMON_INIT_DDR Set for common ddr init with serial presence detect in diff --git a/api/Makefile b/api/Makefile index fb130ffe8b..3c095eedb6 100644 --- a/api/Makefile +++ b/api/Makefile @@ -4,5 +4,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-$(CONFIG_API) += api.o api_display.o api_net.o api_storage.o \ - api_platform-$(ARCH).o +obj-y += api.o api_display.o api_net.o api_storage.o +obj-$(CONFIG_ARM) += api_platform-arm.o +obj-$(CONFIG_PPC) += api_platform-powerpc.o diff --git a/arch/arm/cpu/armv7/am33xx/Makefile b/arch/arm/cpu/armv7/am33xx/Makefile index 966fcab71b..5566310d94 100644 --- a/arch/arm/cpu/armv7/am33xx/Makefile +++ b/arch/arm/cpu/armv7/am33xx/Makefile @@ -19,4 +19,3 @@ obj-y += ddr.o obj-y += emif4.o obj-y += board.o obj-y += mux.o -obj-$(CONFIG_NAND_OMAP_GPMC) += elm.o diff --git a/arch/arm/cpu/armv7/am33xx/mem.c b/arch/arm/cpu/armv7/am33xx/mem.c index b6eb46678f..56c9e7dbce 100644 --- a/arch/arm/cpu/armv7/am33xx/mem.c +++ b/arch/arm/cpu/armv7/am33xx/mem.c @@ -22,17 +22,6 @@ struct gpmc *gpmc_cfg; -#if defined(CONFIG_CMD_NAND) -static const u32 gpmc_m_nand[GPMC_MAX_REG] = { - M_NAND_GPMC_CONFIG1, - M_NAND_GPMC_CONFIG2, - M_NAND_GPMC_CONFIG3, - M_NAND_GPMC_CONFIG4, - M_NAND_GPMC_CONFIG5, - M_NAND_GPMC_CONFIG6, 0 -}; -#endif - void enable_gpmc_cs_config(const u32 *gpmc_config, struct gpmc_cs *cs, u32 base, u32 size) @@ -61,11 +50,34 @@ void gpmc_init(void) { /* putting a blanket check on GPMC based on ZeBu for now */ gpmc_cfg = (struct gpmc *)GPMC_BASE; - -#ifdef CONFIG_CMD_NAND - const u32 *gpmc_config = NULL; - u32 base = 0; +#if defined(CONFIG_NOR) +/* configure GPMC for NOR */ + const u32 gpmc_regs[GPMC_MAX_REG] = { STNOR_GPMC_CONFIG1, + STNOR_GPMC_CONFIG2, + STNOR_GPMC_CONFIG3, + STNOR_GPMC_CONFIG4, + STNOR_GPMC_CONFIG5, + STNOR_GPMC_CONFIG6, + STNOR_GPMC_CONFIG7 + }; + u32 size = GPMC_SIZE_16M; + u32 base = CONFIG_SYS_FLASH_BASE; +#elif defined(CONFIG_NAND) +/* configure GPMC for NAND */ + const u32 gpmc_regs[GPMC_MAX_REG] = { M_NAND_GPMC_CONFIG1, + M_NAND_GPMC_CONFIG2, + M_NAND_GPMC_CONFIG3, + M_NAND_GPMC_CONFIG4, + M_NAND_GPMC_CONFIG5, + M_NAND_GPMC_CONFIG6, + 0 + }; + u32 size = GPMC_SIZE_256M; + u32 base = CONFIG_SYS_NAND_BASE; +#else + const u32 gpmc_regs[GPMC_MAX_REG] = { 0, 0, 0, 0, 0, 0, 0 }; u32 size = 0; + u32 base = 0; #endif /* global settings */ writel(0x00000008, &gpmc_cfg->sysconfig); @@ -81,12 +93,6 @@ void gpmc_init(void) */ writel(0, &gpmc_cfg->cs[0].config7); sdelay(1000); - -#ifdef CONFIG_CMD_NAND - gpmc_config = gpmc_m_nand; - - base = PISMO1_NAND_BASE; - size = PISMO1_NAND_SIZE; - enable_gpmc_cs_config(gpmc_config, &gpmc_cfg->cs[0], base, size); -#endif + /* enable chip-select specific configurations */ + enable_gpmc_cs_config(gpmc_regs, &gpmc_cfg->cs[0], base, size); } diff --git a/arch/arm/cpu/armv7/omap-common/Makefile b/arch/arm/cpu/armv7/omap-common/Makefile index 679c1a18a4..59f5352b26 100644 --- a/arch/arm/cpu/armv7/omap-common/Makefile +++ b/arch/arm/cpu/armv7/omap-common/Makefile @@ -18,7 +18,7 @@ obj-y += abb.o endif ifneq ($(CONFIG_OMAP54XX),) -COBJS += pipe3-phy.o +obj-y += pipe3-phy.o obj-$(CONFIG_SCSI_AHCI_PLAT) += sata.o endif diff --git a/arch/arm/cpu/armv7/omap-common/clocks-common.c b/arch/arm/cpu/armv7/omap-common/clocks-common.c index bb77b5ca3e..dfa3760dfc 100644 --- a/arch/arm/cpu/armv7/omap-common/clocks-common.c +++ b/arch/arm/cpu/armv7/omap-common/clocks-common.c @@ -779,7 +779,8 @@ void gpi2c_init(void) static int gpi2c = 1; if (gpi2c) { - i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); + i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, + CONFIG_SYS_OMAP24_I2C_SLAVE); gpi2c = 0; } } diff --git a/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds b/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds index 5e93b343e6..02aa129733 100644 --- a/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds +++ b/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds @@ -33,6 +33,11 @@ SECTIONS .data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram . = ALIGN(4); + .u_boot_list : { + KEEP(*(SORT(.u_boot_list*_i2c_*))); + } >.sram + + . = ALIGN(4); __image_copy_end = .; _end = .; diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c index 7d1f8d9d2c..29228160c3 100644 --- a/arch/arm/cpu/armv7/omap3/board.c +++ b/arch/arm/cpu/armv7/omap3/board.c @@ -98,7 +98,7 @@ void spl_board_init(void) gpmc_init(); #endif #ifdef CONFIG_SPL_I2C_SUPPORT - i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); + i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE); #endif } #endif /* CONFIG_SPL_BUILD */ diff --git a/arch/arm/cpu/armv7/omap3/clock.c b/arch/arm/cpu/armv7/omap3/clock.c index ae9c4c318f..1bc27bdc7f 100644 --- a/arch/arm/cpu/armv7/omap3/clock.c +++ b/arch/arm/cpu/armv7/omap3/clock.c @@ -708,7 +708,7 @@ void per_clocks_enable(void) sr32(&prcm_base->iclken_per, 17, 1, 1); #endif -#ifdef CONFIG_DRIVER_OMAP34XX_I2C +#ifdef CONFIG_SYS_I2C_OMAP34XX /* Turn on all 3 I2C clocks */ sr32(&prcm_base->fclken1_core, 15, 3, 0x7); sr32(&prcm_base->iclken1_core, 15, 3, 0x7); /* I2C1,2,3 = on */ diff --git a/arch/arm/cpu/armv7/rmobile/Makefile b/arch/arm/cpu/armv7/rmobile/Makefile index 7b9d47eb87..22219990dd 100644 --- a/arch/arm/cpu/armv7/rmobile/Makefile +++ b/arch/arm/cpu/armv7/rmobile/Makefile @@ -14,10 +14,4 @@ obj-$(CONFIG_R8A7740) += lowlevel_init.o cpu_info-r8a7740.o pfc-r8a7740.o obj-$(CONFIG_R8A7790) += lowlevel_init_ca15.o cpu_info-r8a7790.o pfc-r8a7790.o obj-$(CONFIG_R8A7791) += lowlevel_init_ca15.o cpu_info-r8a7791.o pfc-r8a7791.o obj-$(CONFIG_SH73A0) += lowlevel_init.o cpu_info-sh73a0.o pfc-sh73a0.o -obj-$(CONFIG_TMU_TIMER) += sh_timer.o - -SRCS += $(obj)sh_timer.c -# from arch/sh/lib/ directory -$(obj)sh_timer.c: - @rm -f $(obj)sh_timer.c - ln -s $(SRCTREE)/arch/sh/lib/time.c $(obj)sh_timer.c +obj-$(CONFIG_TMU_TIMER) += ../../../../sh/lib/time.o diff --git a/arch/arm/include/asm/arch-am33xx/i2c.h b/arch/arm/include/asm/arch-am33xx/i2c.h index 8bfa53f41b..8642c8f872 100644 --- a/arch/arm/include/asm/arch-am33xx/i2c.h +++ b/arch/arm/include/asm/arch-am33xx/i2c.h @@ -4,8 +4,8 @@ * * SPDX-License-Identifier: GPL-2.0+ */ -#ifndef _I2C_H_ -#define _I2C_H_ +#ifndef _I2C_AM33XX_H_ +#define _I2C_AM33XX_H_ #define I2C_BASE1 0x44E0B000 #define I2C_BASE2 0x4802A000 @@ -62,4 +62,4 @@ struct i2c { #define I2C_IP_CLK 48000000 #define I2C_INTERNAL_SAMPLING_CLK 12000000 -#endif /* _I2C_H_ */ +#endif /* _I2C_AM33XX_H_ */ diff --git a/arch/arm/include/asm/arch-am33xx/mem.h b/arch/arm/include/asm/arch-am33xx/mem.h index 983ea28dc0..e7e8c58b00 100644 --- a/arch/arm/include/asm/arch-am33xx/mem.h +++ b/arch/arm/include/asm/arch-am33xx/mem.h @@ -68,9 +68,4 @@ #define PISMO2_NAND_CS0 7 #define PISMO2_NAND_CS1 8 -/* make it readable for the gpmc_init */ -#define PISMO1_NOR_BASE FLASH_BASE -#define PISMO1_NAND_BASE CONFIG_SYS_NAND_BASE -#define PISMO1_NAND_SIZE GPMC_SIZE_256M - #endif /* endif _MEM_H_ */ diff --git a/arch/arm/include/asm/arch-bcm2835/mbox.h b/arch/arm/include/asm/arch-bcm2835/mbox.h index 24abe57959..6b806ec57f 100644 --- a/arch/arm/include/asm/arch-bcm2835/mbox.h +++ b/arch/arm/include/asm/arch-bcm2835/mbox.h @@ -350,6 +350,7 @@ struct bcm2835_mbox_tag_overscan { u32 top; u32 bottom; u32 left; + u32 right; } resp; } body; }; diff --git a/arch/arm/include/asm/arch-omap3/dss.h b/arch/arm/include/asm/arch-omap3/dss.h index ae0babf17c..8bf6b4895f 100644 --- a/arch/arm/include/asm/arch-omap3/dss.h +++ b/arch/arm/include/asm/arch-omap3/dss.h @@ -178,10 +178,11 @@ struct venc_regs { #define LCD_INTERFACE_24_BIT 3 /* Polarity */ -#define DSS_IVS (1 << 12) -#define DSS_IHS (1 << 13) -#define DSS_IPC (1 << 14) -#define DSS_IEO (1 << 15) +#define DSS_IVS (1 << 12) +#define DSS_IHS (1 << 13) +#define DSS_IPC (1 << 14) +#define DSS_IEO (1 << 15) +#define DSS_ONOFF (1 << 17) /* GFX format */ #define GFXFORMAT_BITMAP1 (0x0 << 1) diff --git a/arch/arm/include/asm/arch-am33xx/elm.h b/arch/arm/include/asm/omap_elm.h index 45454eaf0f..45454eaf0f 100644 --- a/arch/arm/include/asm/arch-am33xx/elm.h +++ b/arch/arm/include/asm/omap_elm.h diff --git a/arch/arm/include/asm/omap_gpmc.h b/arch/arm/include/asm/omap_gpmc.h index dd40cb6c16..d4143ecd80 100644 --- a/arch/arm/include/asm/omap_gpmc.h +++ b/arch/arm/include/asm/omap_gpmc.h @@ -68,4 +68,20 @@ } #endif +enum omap_ecc { + /* 1-bit ECC calculation by Software, Error detection by Software */ + OMAP_ECC_HAM1_CODE_SW = 1, /* avoid un-initialized int can be 0x0 */ + /* 1-bit ECC calculation by GPMC, Error detection by Software */ + /* ECC layout compatible to legacy ROMCODE. */ + OMAP_ECC_HAM1_CODE_HW, + /* 4-bit ECC calculation by GPMC, Error detection by Software */ + OMAP_ECC_BCH4_CODE_HW_DETECTION_SW, + /* 4-bit ECC calculation by GPMC, Error detection by ELM */ + OMAP_ECC_BCH4_CODE_HW, + /* 8-bit ECC calculation by GPMC, Error detection by Software */ + OMAP_ECC_BCH8_CODE_HW_DETECTION_SW, + /* 8-bit ECC calculation by GPMC, Error detection by ELM */ + OMAP_ECC_BCH8_CODE_HW, +}; + #endif /* __ASM_OMAP_GPMC_H */ diff --git a/arch/blackfin/cpu/bootrom-asm-offsets.awk b/arch/blackfin/cpu/bootrom-asm-offsets.awk index 1d61824254..1d61824254 100755..100644 --- a/arch/blackfin/cpu/bootrom-asm-offsets.awk +++ b/arch/blackfin/cpu/bootrom-asm-offsets.awk diff --git a/arch/blackfin/cpu/os_log.c b/arch/blackfin/cpu/os_log.c index e1c8e2948d..2092d9e3b6 100644 --- a/arch/blackfin/cpu/os_log.c +++ b/arch/blackfin/cpu/os_log.c @@ -12,12 +12,12 @@ #define OS_LOG_MAGIC_ADDR ((unsigned long *)0x4f0) #define OS_LOG_PTR_ADDR ((char **)0x4f4) -bool bfin_os_log_check(void) +int bfin_os_log_check(void) { if (*OS_LOG_MAGIC_ADDR != OS_LOG_MAGIC) - return false; + return 0; *OS_LOG_MAGIC_ADDR = 0; - return true; + return 1; } void bfin_os_log_dump(void) diff --git a/arch/blackfin/include/asm/blackfin_local.h b/arch/blackfin/include/asm/blackfin_local.h index ab31dcb815..8ea8cde691 100644 --- a/arch/blackfin/include/asm/blackfin_local.h +++ b/arch/blackfin/include/asm/blackfin_local.h @@ -51,7 +51,7 @@ extern u_long get_dclk(void); # define bfin_revid() (bfin_read_CHIPID() >> 28) -extern bool bfin_os_log_check(void); +extern int bfin_os_log_check(void); extern void bfin_os_log_dump(void); extern void blackfin_icache_flush_range(const void *, const void *); diff --git a/arch/microblaze/cpu/u-boot.lds b/arch/microblaze/cpu/u-boot.lds index 3e6204de32..fdad20753d 100644 --- a/arch/microblaze/cpu/u-boot.lds +++ b/arch/microblaze/cpu/u-boot.lds @@ -30,7 +30,7 @@ SECTIONS { __data_start = .; #ifdef CONFIG_OF_EMBED - dts/libdts.o (.data) + dts/built-in.o (.data) #endif *(.data) __data_end = .; diff --git a/arch/mips/cpu/mips32/cache.S b/arch/mips/cpu/mips32/cache.S index 12f656cad0..22bd844eae 100644 --- a/arch/mips/cpu/mips32/cache.S +++ b/arch/mips/cpu/mips32/cache.S @@ -20,15 +20,6 @@ #define RA t9 -/* - * 16kB is the maximum size of instruction and data caches on MIPS 4K, - * 64kB is on 4KE, 24K, 5K, etc. Set bigger size for convenience. - * - * Note that the above size is the maximum size of primary cache. U-Boot - * doesn't have L2 cache support for now. - */ -#define MIPS_MAX_CACHE_SIZE 0x10000 - #define INDEX_BASE CKSEG0 .macro cache_op op addr @@ -126,12 +117,85 @@ LEAF(mips_init_dcache) */ NESTED(mips_cache_reset, 0, ra) move RA, ra - li t2, CONFIG_SYS_ICACHE_SIZE - li t3, CONFIG_SYS_DCACHE_SIZE + +#if !defined(CONFIG_SYS_ICACHE_SIZE) || !defined(CONFIG_SYS_DCACHE_SIZE) || \ + !defined(CONFIG_SYS_CACHELINE_SIZE) + /* read Config1 for use below */ + mfc0 t5, CP0_CONFIG, 1 +#endif + +#ifdef CONFIG_SYS_CACHELINE_SIZE + li t7, CONFIG_SYS_CACHELINE_SIZE li t8, CONFIG_SYS_CACHELINE_SIZE +#else + /* Detect I-cache line size. */ + srl t8, t5, MIPS_CONF1_IL_SHIFT + andi t8, t8, (MIPS_CONF1_IL >> MIPS_CONF1_IL_SHIFT) + beqz t8, 1f + li t6, 2 + sllv t8, t6, t8 - li v0, MIPS_MAX_CACHE_SIZE +1: /* Detect D-cache line size. */ + srl t7, t5, MIPS_CONF1_DL_SHIFT + andi t7, t7, (MIPS_CONF1_DL >> MIPS_CONF1_DL_SHIFT) + beqz t7, 1f + li t6, 2 + sllv t7, t6, t7 +1: +#endif +#ifdef CONFIG_SYS_ICACHE_SIZE + li t2, CONFIG_SYS_ICACHE_SIZE +#else + /* Detect I-cache size. */ + srl t6, t5, MIPS_CONF1_IS_SHIFT + andi t6, t6, (MIPS_CONF1_IS >> MIPS_CONF1_IS_SHIFT) + li t4, 32 + xori t2, t6, 0x7 + beqz t2, 1f + addi t6, t6, 1 + sllv t4, t4, t6 +1: /* At this point t4 == I-cache sets. */ + mul t2, t4, t8 + srl t6, t5, MIPS_CONF1_IA_SHIFT + andi t6, t6, (MIPS_CONF1_IA >> MIPS_CONF1_IA_SHIFT) + addi t6, t6, 1 + /* At this point t6 == I-cache ways. */ + mul t2, t2, t6 +#endif + +#ifdef CONFIG_SYS_DCACHE_SIZE + li t3, CONFIG_SYS_DCACHE_SIZE +#else + /* Detect D-cache size. */ + srl t6, t5, MIPS_CONF1_DS_SHIFT + andi t6, t6, (MIPS_CONF1_DS >> MIPS_CONF1_DS_SHIFT) + li t4, 32 + xori t3, t6, 0x7 + beqz t3, 1f + addi t6, t6, 1 + sllv t4, t4, t6 +1: /* At this point t4 == I-cache sets. */ + mul t3, t4, t7 + srl t6, t5, MIPS_CONF1_DA_SHIFT + andi t6, t6, (MIPS_CONF1_DA >> MIPS_CONF1_DA_SHIFT) + addi t6, t6, 1 + /* At this point t6 == I-cache ways. */ + mul t3, t3, t6 +#endif + + /* Determine the largest L1 cache size */ +#if defined(CONFIG_SYS_ICACHE_SIZE) && defined(CONFIG_SYS_DCACHE_SIZE) +#if CONFIG_SYS_ICACHE_SIZE > CONFIG_SYS_DCACHE_SIZE + li v0, CONFIG_SYS_ICACHE_SIZE +#else + li v0, CONFIG_SYS_DCACHE_SIZE +#endif +#else + move v0, t2 + sltu t1, t2, t3 + movn v0, t3, t1 +#endif /* * Now clear that much memory starting from zero. */ @@ -163,7 +227,7 @@ NESTED(mips_cache_reset, 0, ra) * then initialize D-cache. */ move a1, t3 - move a2, t8 + move a2, t7 PTR_LA v1, mips_init_dcache jalr v1 diff --git a/arch/mips/cpu/mips32/cpu.c b/arch/mips/cpu/mips32/cpu.c index 28d5c45683..278865b6ff 100644 --- a/arch/mips/cpu/mips32/cpu.c +++ b/arch/mips/cpu/mips32/cpu.c @@ -34,28 +34,89 @@ int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return 0; } +#ifdef CONFIG_SYS_CACHELINE_SIZE + +static inline unsigned long icache_line_size(void) +{ + return CONFIG_SYS_CACHELINE_SIZE; +} + +static inline unsigned long dcache_line_size(void) +{ + return CONFIG_SYS_CACHELINE_SIZE; +} + +#else /* !CONFIG_SYS_CACHELINE_SIZE */ + +static inline unsigned long icache_line_size(void) +{ + unsigned long conf1, il; + conf1 = read_c0_config1(); + il = (conf1 & MIPS_CONF1_IL) >> MIPS_CONF1_IL_SHIFT; + if (!il) + return 0; + return 2 << il; +} + +static inline unsigned long dcache_line_size(void) +{ + unsigned long conf1, dl; + conf1 = read_c0_config1(); + dl = (conf1 & MIPS_CONF1_DL) >> MIPS_CONF1_DL_SHIFT; + if (!dl) + return 0; + return 2 << dl; +} + +#endif /* !CONFIG_SYS_CACHELINE_SIZE */ + void flush_cache(ulong start_addr, ulong size) { - unsigned long lsize = CONFIG_SYS_CACHELINE_SIZE; - unsigned long addr = start_addr & ~(lsize - 1); - unsigned long aend = (start_addr + size - 1) & ~(lsize - 1); + unsigned long ilsize = icache_line_size(); + unsigned long dlsize = dcache_line_size(); + unsigned long addr, aend; /* aend will be miscalculated when size is zero, so we return here */ if (size == 0) return; + addr = start_addr & ~(dlsize - 1); + aend = (start_addr + size - 1) & ~(dlsize - 1); + + if (ilsize == dlsize) { + /* flush I-cache & D-cache simultaneously */ + while (1) { + cache_op(HIT_WRITEBACK_INV_D, addr); + cache_op(HIT_INVALIDATE_I, addr); + if (addr == aend) + break; + addr += dlsize; + } + return; + } + + /* flush D-cache */ while (1) { cache_op(HIT_WRITEBACK_INV_D, addr); + if (addr == aend) + break; + addr += dlsize; + } + + /* flush I-cache */ + addr = start_addr & ~(ilsize - 1); + aend = (start_addr + size - 1) & ~(ilsize - 1); + while (1) { cache_op(HIT_INVALIDATE_I, addr); if (addr == aend) break; - addr += lsize; + addr += ilsize; } } void flush_dcache_range(ulong start_addr, ulong stop) { - unsigned long lsize = CONFIG_SYS_CACHELINE_SIZE; + unsigned long lsize = dcache_line_size(); unsigned long addr = start_addr & ~(lsize - 1); unsigned long aend = (stop - 1) & ~(lsize - 1); @@ -69,7 +130,7 @@ void flush_dcache_range(ulong start_addr, ulong stop) void invalidate_dcache_range(ulong start_addr, ulong stop) { - unsigned long lsize = CONFIG_SYS_CACHELINE_SIZE; + unsigned long lsize = dcache_line_size(); unsigned long addr = start_addr & ~(lsize - 1); unsigned long aend = (stop - 1) & ~(lsize - 1); diff --git a/arch/mips/cpu/mips32/start.S b/arch/mips/cpu/mips32/start.S index 70ad198cc9..68e59b596f 100644 --- a/arch/mips/cpu/mips32/start.S +++ b/arch/mips/cpu/mips32/start.S @@ -51,7 +51,7 @@ _start: */ .word CONFIG_SYS_XWAY_EBU_BOOTCFG .word 0x0 -#elif defined(CONFIG_QEMU_MALTA) +#elif defined(CONFIG_MALTA) /* * Linux expects the Board ID here. */ diff --git a/arch/mips/include/asm/malta.h b/arch/mips/include/asm/malta.h index d4d44a299f..9e7c045aac 100644 --- a/arch/mips/include/asm/malta.h +++ b/arch/mips/include/asm/malta.h @@ -1,23 +1,67 @@ /* * Copyright (C) 2013 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2013 Imagination Technologies * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. + * SPDX-License-Identifier: GPL-2.0 */ #ifndef _MIPS_ASM_MALTA_H #define _MIPS_ASM_MALTA_H -#define MALTA_IO_PORT_BASE 0x18000000 +#define MALTA_GT_BASE 0x1be00000 +#define MALTA_GT_PCIIO_BASE 0x18000000 +#define MALTA_GT_UART0_BASE (MALTA_GT_PCIIO_BASE + 0x3f8) -#define MALTA_UART_BASE (MALTA_IO_PORT_BASE + 0x3f8) +#define MALTA_MSC01_BIU_BASE 0x1bc80000 +#define MALTA_MSC01_PCI_BASE 0x1bd00000 +#define MALTA_MSC01_PBC_BASE 0x1bd40000 +#define MALTA_MSC01_IP1_BASE 0x1bc00000 +#define MALTA_MSC01_IP1_SIZE 0x00400000 +#define MALTA_MSC01_IP2_BASE1 0x10000000 +#define MALTA_MSC01_IP2_SIZE1 0x08000000 +#define MALTA_MSC01_IP2_BASE2 0x18000000 +#define MALTA_MSC01_IP2_SIZE2 0x04000000 +#define MALTA_MSC01_IP3_BASE 0x1c000000 +#define MALTA_MSC01_IP3_SIZE 0x04000000 +#define MALTA_MSC01_PCIMEM_BASE 0x10000000 +#define MALTA_MSC01_PCIMEM_SIZE 0x10000000 +#define MALTA_MSC01_PCIMEM_MAP 0x10000000 +#define MALTA_MSC01_PCIIO_BASE 0x1b000000 +#define MALTA_MSC01_PCIIO_SIZE 0x00800000 +#define MALTA_MSC01_PCIIO_MAP 0x00000000 +#define MALTA_MSC01_UART0_BASE (MALTA_MSC01_PCIIO_BASE + 0x3f8) -#define MALTA_GT_BASE 0x1be00000 +#define MALTA_ASCIIWORD 0x1f000410 +#define MALTA_ASCIIPOS0 0x1f000418 +#define MALTA_ASCIIPOS1 0x1f000420 +#define MALTA_ASCIIPOS2 0x1f000428 +#define MALTA_ASCIIPOS3 0x1f000430 +#define MALTA_ASCIIPOS4 0x1f000438 +#define MALTA_ASCIIPOS5 0x1f000440 +#define MALTA_ASCIIPOS6 0x1f000448 +#define MALTA_ASCIIPOS7 0x1f000450 -#define MALTA_RESET_BASE 0x1f000500 -#define GORESET 0x42 +#define MALTA_RESET_BASE 0x1f000500 +#define GORESET 0x42 -#define MALTA_FLASH_BASE 0x1fc00000 +#define MALTA_FLASH_BASE 0x1e000000 + +#define MALTA_REVISION 0x1fc00010 +#define MALTA_REVISION_CORID_SHF 10 +#define MALTA_REVISION_CORID_MSK (0x3f << MALTA_REVISION_CORID_SHF) +#define MALTA_REVISION_CORID_CORE_LV 1 +#define MALTA_REVISION_CORID_CORE_FPGA6 14 + +#define PCI_CFG_PIIX4_PIRQRCA 0x60 +#define PCI_CFG_PIIX4_PIRQRCB 0x61 +#define PCI_CFG_PIIX4_PIRQRCC 0x62 +#define PCI_CFG_PIIX4_PIRQRCD 0x63 +#define PCI_CFG_PIIX4_SERIRQC 0x64 +#define PCI_CFG_PIIX4_GENCFG 0xb0 + +#define PCI_CFG_PIIX4_SERIRQC_EN (1 << 7) +#define PCI_CFG_PIIX4_SERIRQC_CONT (1 << 6) + +#define PCI_CFG_PIIX4_GENCFG_SERIRQ (1 << 16) #endif /* _MIPS_ASM_MALTA_H */ diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h index be7e5c65ec..3571e4fdf2 100644 --- a/arch/mips/include/asm/mipsregs.h +++ b/arch/mips/include/asm/mipsregs.h @@ -494,11 +494,17 @@ #define MIPS_CONF1_PC (_ULCAST_(1) << 4) #define MIPS_CONF1_MD (_ULCAST_(1) << 5) #define MIPS_CONF1_C2 (_ULCAST_(1) << 6) +#define MIPS_CONF1_DA_SHIFT 7 #define MIPS_CONF1_DA (_ULCAST_(7) << 7) +#define MIPS_CONF1_DL_SHIFT 10 #define MIPS_CONF1_DL (_ULCAST_(7) << 10) +#define MIPS_CONF1_DS_SHIFT 13 #define MIPS_CONF1_DS (_ULCAST_(7) << 13) +#define MIPS_CONF1_IA_SHIFT 16 #define MIPS_CONF1_IA (_ULCAST_(7) << 16) +#define MIPS_CONF1_IL_SHIFT 19 #define MIPS_CONF1_IL (_ULCAST_(7) << 19) +#define MIPS_CONF1_IS_SHIFT 22 #define MIPS_CONF1_IS (_ULCAST_(7) << 22) #define MIPS_CONF1_TLBS (_ULCAST_(63)<< 25) diff --git a/arch/mips/lib/bootm.c b/arch/mips/lib/bootm.c index 66340ea470..71bb0d2a19 100644 --- a/arch/mips/lib/bootm.c +++ b/arch/mips/lib/bootm.c @@ -17,10 +17,10 @@ DECLARE_GLOBAL_DATA_PTR; #define LINUX_MAX_ENVS 256 #define LINUX_MAX_ARGS 256 -#if defined(CONFIG_QEMU_MALTA) -#define mips_boot_qemu_malta 1 +#if defined(CONFIG_MALTA) +#define mips_boot_malta 1 #else -#define mips_boot_qemu_malta 0 +#define mips_boot_malta 0 #endif static int linux_argc; @@ -139,7 +139,7 @@ static void linux_env_set(const char *env_name, const char *env_val) strcpy(linux_env_p, env_name); linux_env_p += strlen(env_name); - if (mips_boot_qemu_malta) { + if (mips_boot_malta) { linux_env_p++; linux_env[++linux_env_idx] = linux_env_p; } else { @@ -196,8 +196,10 @@ static void boot_prep_linux(bootm_headers_t *images) if (cp) linux_env_set("eth1addr", cp); - if (mips_boot_qemu_malta) - linux_env_set("modetty0", "38400n8r"); + if (mips_boot_malta) { + sprintf(env_buf, "%un8r", gd->baudrate); + linux_env_set("modetty0", env_buf); + } } static void boot_jump_linux(bootm_headers_t *images) @@ -210,7 +212,7 @@ static void boot_jump_linux(bootm_headers_t *images) bootstage_mark(BOOTSTAGE_ID_RUN_OS); - if (mips_boot_qemu_malta) + if (mips_boot_malta) linux_extra = gd->ram_size; /* we assume that the kernel is in place */ diff --git a/arch/powerpc/cpu/Makefile b/arch/powerpc/cpu/Makefile new file mode 100644 index 0000000000..d630abe1da --- /dev/null +++ b/arch/powerpc/cpu/Makefile @@ -0,0 +1,3 @@ +ifneq ($(filter mpc83xx mpc85xx mpc86xx,$(CPU)),) +obj-y += mpc8xxx/ +endif diff --git a/arch/powerpc/cpu/mpc512x/Makefile b/arch/powerpc/cpu/mpc512x/Makefile index f770350dc2..a4934ef78a 100644 --- a/arch/powerpc/cpu/mpc512x/Makefile +++ b/arch/powerpc/cpu/mpc512x/Makefile @@ -4,8 +4,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -$(shell mkdir -p $(OBJTREE)/board/freescale/common) - extra-y = start.o obj-y := cpu.o obj-y += traps.o diff --git a/arch/powerpc/cpu/mpc824x/.gitignore b/arch/powerpc/cpu/mpc824x/.gitignore deleted file mode 100644 index 2d79931e96..0000000000 --- a/arch/powerpc/cpu/mpc824x/.gitignore +++ /dev/null @@ -1 +0,0 @@ -/bedbug_603e.c diff --git a/arch/powerpc/cpu/mpc824x/Makefile b/arch/powerpc/cpu/mpc824x/Makefile index 67b0d1713c..2c8be92571 100644 --- a/arch/powerpc/cpu/mpc824x/Makefile +++ b/arch/powerpc/cpu/mpc824x/Makefile @@ -5,15 +5,7 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)drivers/epic $(obj)drivers/i2c) -endif - extra-y = start.o obj-y = traps.o cpu.o cpu_init.o interrupts.o speed.o \ drivers/epic/epic1.o drivers/i2c/i2c.o pci.o -obj-y += bedbug_603e.o - -SRCS += $(obj)bedbug_603e.c -$(obj)bedbug_603e.c: - ln -sf $(src)../mpc8260/bedbug_603e.c $(obj)bedbug_603e.c +obj-y += ../mpc8260/bedbug_603e.o diff --git a/arch/powerpc/cpu/mpc824x/cpu_init.c b/arch/powerpc/cpu/mpc824x/cpu_init.c index 37d796e635..47ac18e757 100644 --- a/arch/powerpc/cpu/mpc824x/cpu_init.c +++ b/arch/powerpc/cpu/mpc824x/cpu_init.c @@ -52,7 +52,7 @@ cpu_init_f (void) CONFIG_WRITE_HALFWORD(PCICR, 0x06); /* Bus Master, respond to PCI memory space acesses*/ /* CONFIG_WRITE_HALFWORD(PCISR, 0xffff); */ /*reset PCISR*/ -#if defined(CONFIG_MUSENKI) || defined(CONFIG_PN62) +#if defined(CONFIG_MUSENKI) /* Why is this here, you ask? Try, just try setting 0x8000 * in PCIACR with CONFIG_WRITE_HALFWORD() * this one was a stumper, and we are annoyed @@ -142,9 +142,7 @@ cpu_init_f (void) CONFIG_READ_WORD(PICR2, val); val= val & ~ (PICR2_CF_SNOOP_WS_MASK | PICR2_CF_APHASE_WS_MASK); /*mask off waitstate bits*/ -#ifndef CONFIG_PN62 val |= PICR2_CF_SNOOP_WS_1WS | PICR2_CF_APHASE_WS_1WS; /*1 wait state*/ -#endif CONFIG_WRITE_WORD(PICR2, val); CONFIG_WRITE_WORD(EUMBBAR, CONFIG_SYS_EUMB_ADDR); @@ -186,7 +184,7 @@ cpu_init_f (void) * should define CONFIG_SYS_ACTORW to 0 if they don't want to set it, or even, if * its not set, we define it to zero in this file */ -#if defined(CONFIG_CU824) || defined(CONFIG_PN62) +#if defined(CONFIG_CU824) CONFIG_WRITE_WORD(MCCR4, (CONFIG_SYS_PRETOACT << MCCR4_PRETOACT_SHIFT) | (CONFIG_SYS_ACTTOPRE << MCCR4_ACTTOPRE_SHIFT) | diff --git a/arch/powerpc/cpu/mpc83xx/Makefile b/arch/powerpc/cpu/mpc83xx/Makefile index b7142f0dff..c345dd6ae6 100644 --- a/arch/powerpc/cpu/mpc83xx/Makefile +++ b/arch/powerpc/cpu/mpc83xx/Makefile @@ -38,21 +38,11 @@ obj-$(CONFIG_OF_LIBFDT) += fdt.o # Stub implementations of cache management functions for USB obj-y += cache.o -ifdef CONFIG_FSL_DDR2 -obj-$(CONFIG_MPC8349) += ddr-gen2.o -SRCS += $(obj)ddr-gen2.c +ifdef CONFIG_SYS_FSL_DDR2 +obj-$(CONFIG_MPC8349) += $(SRCTREE)/drivers/ddr/fsl/mpc85xx_ddr_gen2.o else obj-y += spd_sdram.o endif -obj-$(CONFIG_FSL_DDR2) += law.o +obj-$(CONFIG_SYS_FSL_DDR2) += law.o endif # not minimal - -$(obj)ddr-gen1.c: - ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/ddr-gen1.c $(obj)ddr-gen1.c - -$(obj)ddr-gen2.c: - ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/ddr-gen2.c $(obj)ddr-gen2.c - -$(obj)ddr-gen3.c: - ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/ddr-gen3.c $(obj)ddr-gen3.c diff --git a/arch/powerpc/cpu/mpc83xx/ecc.c b/arch/powerpc/cpu/mpc83xx/ecc.c index 120b37ba63..985a024425 100644 --- a/arch/powerpc/cpu/mpc83xx/ecc.c +++ b/arch/powerpc/cpu/mpc83xx/ecc.c @@ -15,8 +15,8 @@ void ecc_print_status(void) { immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; -#ifdef CONFIG_FSL_DDR2 - ccsr_ddr_t *ddr = &immap->ddr; +#ifdef CONFIG_SYS_FSL_DDR2 + struct ccsr_ddr __iomem *ddr = &immap->ddr; #else ddr83xx_t *ddr = &immap->ddr; #endif @@ -99,8 +99,8 @@ void ecc_print_status(void) int do_ecc(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) { immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; -#ifdef CONFIG_FSL_DDR2 - ccsr_ddr_t *ddr = &immap->ddr; +#ifdef CONFIG_SYS_FSL_DDR2 + struct ccsr_ddr __iomem *ddr = &immap->ddr; #else ddr83xx_t *ddr = &immap->ddr; #endif diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile index 50ddb5040e..ef7637a49c 100644 --- a/arch/powerpc/cpu/mpc85xx/Makefile +++ b/arch/powerpc/cpu/mpc85xx/Makefile @@ -29,48 +29,6 @@ obj-$(CONFIG_MP) += release.o obj-$(CONFIG_CMD_ERRATA) += cmd_errata.o obj-$(CONFIG_CPM2) += commproc.o -# supports ddr1 -obj-$(CONFIG_MPC8540) += ddr-gen1.o -obj-$(CONFIG_MPC8560) += ddr-gen1.o -obj-$(CONFIG_MPC8541) += ddr-gen1.o -obj-$(CONFIG_MPC8555) += ddr-gen1.o - -# supports ddr1/2 -obj-$(CONFIG_MPC8548) += ddr-gen2.o -obj-$(CONFIG_MPC8568) += ddr-gen2.o -obj-$(CONFIG_MPC8544) += ddr-gen2.o - -# supports ddr1/2/3 -obj-$(CONFIG_PPC_C29X) += ddr-gen3.o -obj-$(CONFIG_MPC8572) += ddr-gen3.o -obj-$(CONFIG_MPC8536) += ddr-gen3.o -obj-$(CONFIG_MPC8569) += ddr-gen3.o -obj-$(CONFIG_P1010) += ddr-gen3.o -obj-$(CONFIG_P1011) += ddr-gen3.o -obj-$(CONFIG_P1012) += ddr-gen3.o -obj-$(CONFIG_P1013) += ddr-gen3.o -obj-$(CONFIG_P1014) += ddr-gen3.o -obj-$(CONFIG_P1020) += ddr-gen3.o -obj-$(CONFIG_P1021) += ddr-gen3.o -obj-$(CONFIG_P1022) += ddr-gen3.o -obj-$(CONFIG_P1023) += ddr-gen3.o -obj-$(CONFIG_P1024) += ddr-gen3.o -obj-$(CONFIG_P1025) += ddr-gen3.o -obj-$(CONFIG_P2010) += ddr-gen3.o -obj-$(CONFIG_P2020) += ddr-gen3.o -obj-$(CONFIG_PPC_P2041) += ddr-gen3.o -obj-$(CONFIG_PPC_P3041) += ddr-gen3.o -obj-$(CONFIG_PPC_P4080) += ddr-gen3.o -obj-$(CONFIG_PPC_P5020) += ddr-gen3.o -obj-$(CONFIG_PPC_P5040) += ddr-gen3.o -obj-$(CONFIG_PPC_T4240) += ddr-gen3.o -obj-$(CONFIG_PPC_T4160) += ddr-gen3.o -obj-$(CONFIG_PPC_B4420) += ddr-gen3.o -obj-$(CONFIG_PPC_B4860) += ddr-gen3.o -obj-$(CONFIG_BSC9131) += ddr-gen3.o -obj-$(CONFIG_BSC9132) += ddr-gen3.o -obj-$(CONFIG_PPC_T1040) += ddr-gen3.o - obj-$(CONFIG_CPM2) += ether_fcc.o obj-$(CONFIG_OF_LIBFDT) += fdt.o obj-$(CONFIG_FSL_CORENET) += liodn.o @@ -89,6 +47,12 @@ obj-$(CONFIG_PPC_T4160) += t4240_ids.o obj-$(CONFIG_PPC_B4420) += b4860_ids.o obj-$(CONFIG_PPC_B4860) += b4860_ids.o obj-$(CONFIG_PPC_T1040) += t1040_ids.o +obj-$(CONFIG_PPC_T1042) += t1040_ids.o +obj-$(CONFIG_PPC_T1020) += t1040_ids.o +obj-$(CONFIG_PPC_T1022) += t1040_ids.o +obj-$(CONFIG_PPC_T2080) += t2080_ids.o +obj-$(CONFIG_PPC_T2081) += t2080_ids.o + obj-$(CONFIG_QE) += qe_io.o obj-$(CONFIG_CPM2) += serial_scc.o @@ -128,6 +92,11 @@ obj-$(CONFIG_PPC_B4420) += b4860_serdes.o obj-$(CONFIG_PPC_B4860) += b4860_serdes.o obj-$(CONFIG_BSC9132) += bsc9132_serdes.o obj-$(CONFIG_PPC_T1040) += t1040_serdes.o +obj-$(CONFIG_PPC_T1042) += t1040_serdes.o +obj-$(CONFIG_PPC_T1020) += t1040_serdes.o +obj-$(CONFIG_PPC_T1022) += t1040_serdes.o +obj-$(CONFIG_PPC_T2080) += t2080_serdes.o +obj-$(CONFIG_PPC_T2081) += t2080_serdes.o obj-y += cpu.o obj-y += cpu_init.o diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c index 1a0196c7c4..3e99b079c7 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu.c +++ b/arch/powerpc/cpu/mpc85xx/cpu.c @@ -17,12 +17,12 @@ #include <asm/cache.h> #include <asm/io.h> #include <asm/mmu.h> -#include <asm/fsl_ifc.h> +#include <fsl_ifc.h> #include <asm/fsl_law.h> #include <asm/fsl_lbc.h> #include <post.h> #include <asm/processor.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> DECLARE_GLOBAL_DATA_PTR; @@ -416,7 +416,7 @@ static void dump_spd_ddr_reg(void) int i, j, k, m; u8 *p_8; u32 *p_32; - ccsr_ddr_t *ddr[CONFIG_NUM_DDR_CONTROLLERS]; + struct ccsr_ddr __iomem *ddr[CONFIG_NUM_DDR_CONTROLLERS]; generic_spd_eeprom_t spd[CONFIG_NUM_DDR_CONTROLLERS][CONFIG_DIMM_SLOTS_PER_CTLR]; @@ -453,21 +453,21 @@ static void dump_spd_ddr_reg(void) for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) { switch (i) { case 0: - ddr[i] = (void *)CONFIG_SYS_MPC8xxx_DDR_ADDR; + ddr[i] = (void *)CONFIG_SYS_FSL_DDR_ADDR; break; -#if defined(CONFIG_SYS_MPC8xxx_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1) +#if defined(CONFIG_SYS_FSL_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1) case 1: - ddr[i] = (void *)CONFIG_SYS_MPC8xxx_DDR2_ADDR; + ddr[i] = (void *)CONFIG_SYS_FSL_DDR2_ADDR; break; #endif -#if defined(CONFIG_SYS_MPC8xxx_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2) +#if defined(CONFIG_SYS_FSL_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2) case 2: - ddr[i] = (void *)CONFIG_SYS_MPC8xxx_DDR3_ADDR; + ddr[i] = (void *)CONFIG_SYS_FSL_DDR3_ADDR; break; #endif -#if defined(CONFIG_SYS_MPC8xxx_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3) +#if defined(CONFIG_SYS_FSL_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3) case 3: - ddr[i] = (void *)CONFIG_SYS_MPC8xxx_DDR4_ADDR; + ddr[i] = (void *)CONFIG_SYS_FSL_DDR4_ADDR; break; #endif default: @@ -482,7 +482,7 @@ static void dump_spd_ddr_reg(void) for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) printf(" Base + 0x%04x", (u32)ddr[i] & 0xFFFF); puts("\n"); - for (k = 0; k < sizeof(ccsr_ddr_t)/4; k++) { + for (k = 0; k < sizeof(struct ccsr_ddr)/4; k++) { m = 0; printf("%6d (0x%04x)", k * 4, k * 4); for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) { diff --git a/arch/powerpc/cpu/mpc85xx/fdt.c b/arch/powerpc/cpu/mpc85xx/fdt.c index 2ccd9c7b95..33bc900167 100644 --- a/arch/powerpc/cpu/mpc85xx/fdt.c +++ b/arch/powerpc/cpu/mpc85xx/fdt.c @@ -586,6 +586,7 @@ void ft_cpu_setup(void *blob, bd_t *bd) { int off; int val; + int len; sys_info_t sysinfo; /* delete crypto node if not on an E-processor */ @@ -615,8 +616,8 @@ void ft_cpu_setup(void *blob, bd_t *bd) get_sys_info(&sysinfo); off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4); while (off != -FDT_ERR_NOTFOUND) { - u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0); - val = cpu_to_fdt32(sysinfo.freq_processor[*reg]); + u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", &len); + val = cpu_to_fdt32(sysinfo.freq_processor[(*reg) / (len / 4)]); fdt_setprop(blob, off, "clock-frequency", &val, 4); off = fdt_node_offset_by_prop_value(blob, off, "device_type", "cpu", 4); diff --git a/arch/powerpc/cpu/mpc85xx/liodn.c b/arch/powerpc/cpu/mpc85xx/liodn.c index 4b00da9f75..19e130e87f 100644 --- a/arch/powerpc/cpu/mpc85xx/liodn.c +++ b/arch/powerpc/cpu/mpc85xx/liodn.c @@ -239,9 +239,9 @@ static void fdt_fixup_srio_liodn(void *blob, struct srio_liodn_id_table *tbl) #endif #define CONFIG_SYS_MAX_PCI_EPS 8 -#define CONFIG_SYS_PCI_EP_LIODN_START 256 -static void fdt_fixup_pci_liodn_offsets(void *fdt, const char *compat) +static void fdt_fixup_pci_liodn_offsets(void *fdt, const char *compat, + int ep_liodn_start) { int off, pci_idx = 0, pci_cnt = 0, i, rc; const uint32_t *base_liodn; @@ -271,7 +271,7 @@ static void fdt_fixup_pci_liodn_offsets(void *fdt, const char *compat) continue; } for (i = 0; i < CONFIG_SYS_MAX_PCI_EPS; i++) - liodn_offs[i + 1] = CONFIG_SYS_PCI_EP_LIODN_START + + liodn_offs[i + 1] = ep_liodn_start + i * pci_cnt + pci_idx - *base_liodn; rc = fdt_setprop(fdt, off, "fsl,liodn-offset-list", liodn_offs, sizeof(liodn_offs)); @@ -338,5 +338,22 @@ void fdt_fixup_liodn(void *blob) fdt_fixup_liodn_tbl(blob, rman_liodn_tbl, rman_liodn_tbl_sz); #endif - fdt_fixup_pci_liodn_offsets(blob, "fsl,qoriq-pcie-v2.4"); + ccsr_pcix_t *pcix = (ccsr_pcix_t *)CONFIG_SYS_PCIE1_ADDR; + int pci_ver = pcix->ipver1 & 0xffff, liodn_base = 0; + + if (pci_ver >= 0x0204) { + if (pci_ver >= 0x0300) + liodn_base = 1024; + else + liodn_base = 256; + } + + if (liodn_base) { + char compat[32]; + + sprintf(compat, "fsl,qoriq-pcie-v%d.%d", + (pci_ver & 0xff00) >> 8, pci_ver & 0xff); + fdt_fixup_pci_liodn_offsets(blob, compat, liodn_base); + fdt_fixup_pci_liodn_offsets(blob, "fsl,qoriq-pcie", liodn_base); + } } diff --git a/arch/powerpc/cpu/mpc85xx/mp.c b/arch/powerpc/cpu/mpc85xx/mp.c index 5f198eb305..88c8e65930 100644 --- a/arch/powerpc/cpu/mpc85xx/mp.c +++ b/arch/powerpc/cpu/mpc85xx/mp.c @@ -11,7 +11,7 @@ #include <asm/io.h> #include <asm/mmu.h> #include <asm/fsl_law.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include "mp.h" DECLARE_GLOBAL_DATA_PTR; diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c index d08a8d212d..1a58a194f9 100644 --- a/arch/powerpc/cpu/mpc85xx/speed.c +++ b/arch/powerpc/cpu/mpc85xx/speed.c @@ -122,7 +122,7 @@ void get_sys_info(sys_info_t *sys_info) sys_info->freq_processor[cpu] = freq_c_pll[cplx_pll] / core_cplx_pll_div[c_pll_sel]; } -#ifdef CONFIG_PPC_B4860 +#if defined(CONFIG_PPC_B4860) || defined(CONFIG_PPC_T2080) #define FM1_CLK_SEL 0xe0000000 #define FM1_CLK_SHIFT 29 #else diff --git a/arch/powerpc/cpu/mpc85xx/spl_minimal.c b/arch/powerpc/cpu/mpc85xx/spl_minimal.c index 199b33e3bd..9e4c6c9078 100644 --- a/arch/powerpc/cpu/mpc85xx/spl_minimal.c +++ b/arch/powerpc/cpu/mpc85xx/spl_minimal.c @@ -7,7 +7,7 @@ #include <common.h> #include <asm/processor.h> #include <asm/global_data.h> -#include <asm/fsl_ifc.h> +#include <fsl_ifc.h> #include <asm/io.h> DECLARE_GLOBAL_DATA_PTR; diff --git a/arch/powerpc/cpu/mpc85xx/t2080_ids.c b/arch/powerpc/cpu/mpc85xx/t2080_ids.c new file mode 100644 index 0000000000..068e1f26bf --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/t2080_ids.c @@ -0,0 +1,142 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/fsl_portals.h> +#include <asm/fsl_liodn.h> + +#ifdef CONFIG_SYS_DPAA_QBMAN +struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = { + /* dqrr liodn, frame data liodn, liodn off, sdest */ + SET_QP_INFO(1, 27, 1, 0), + SET_QP_INFO(2, 28, 1, 0), + SET_QP_INFO(3, 29, 1, 1), + SET_QP_INFO(4, 30, 1, 1), + SET_QP_INFO(5, 31, 1, 2), + SET_QP_INFO(6, 32, 1, 2), + SET_QP_INFO(7, 33, 1, 3), + SET_QP_INFO(8, 34, 1, 3), + SET_QP_INFO(9, 35, 1, 0), + SET_QP_INFO(10, 36, 1, 0), + SET_QP_INFO(11, 37, 1, 1), + SET_QP_INFO(12, 38, 1, 1), + SET_QP_INFO(13, 39, 1, 2), + SET_QP_INFO(14, 40, 1, 2), + SET_QP_INFO(15, 41, 1, 3), + SET_QP_INFO(16, 42, 1, 3), + SET_QP_INFO(17, 43, 1, 0), + SET_QP_INFO(18, 44, 1, 0), +}; +#endif + +#ifdef CONFIG_SYS_SRIO +struct srio_liodn_id_table srio_liodn_tbl[] = { + SET_SRIO_LIODN_BASE(1, 307), + SET_SRIO_LIODN_BASE(2, 387), +}; +int srio_liodn_tbl_sz = ARRAY_SIZE(srio_liodn_tbl); +#endif + +struct liodn_id_table liodn_tbl[] = { +#ifdef CONFIG_SYS_DPAA_QBMAN + SET_QMAN_LIODN(62), + SET_BMAN_LIODN(63), +#endif + + SET_SDHC_LIODN(1, 552), + + SET_PME_LIODN(117), + + SET_USB_LIODN(1, "fsl-usb2-mph", 553), + SET_USB_LIODN(2, "fsl-usb2-dr", 554), + + SET_SATA_LIODN(1, 555), + SET_SATA_LIODN(2, 556), + + SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 1, 148), + SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 2, 228), + SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 3, 308), + SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 4, 388), + + SET_DMA_LIODN(1, 147), + SET_DMA_LIODN(2, 227), + SET_DMA_LIODN(3, 226), + + SET_GUTS_LIODN("fsl,rapidio-delta", 199, rio1liodnr, 0), + SET_GUTS_LIODN(NULL, 200, rio2liodnr, 0), + SET_GUTS_LIODN(NULL, 201, rio1maintliodnr, 0), + SET_GUTS_LIODN(NULL, 202, rio2maintliodnr, 0), + +#ifdef CONFIG_SYS_PMAN + SET_PMAN_LIODN(1, 513), + SET_PMAN_LIODN(2, 514), + SET_PMAN_LIODN(3, 515), +#endif + + /* SET_NEXUS_LIODN(557), -- not yet implemented */ +}; +int liodn_tbl_sz = ARRAY_SIZE(liodn_tbl); + +#ifdef CONFIG_SYS_DPAA_FMAN +struct liodn_id_table fman1_liodn_tbl[] = { + SET_FMAN_RX_1G_LIODN(1, 0, 88), + SET_FMAN_RX_1G_LIODN(1, 1, 89), + SET_FMAN_RX_1G_LIODN(1, 2, 90), + SET_FMAN_RX_1G_LIODN(1, 3, 91), + SET_FMAN_RX_1G_LIODN(1, 4, 92), + SET_FMAN_RX_1G_LIODN(1, 5, 93), + SET_FMAN_RX_10G_LIODN(1, 0, 94), + SET_FMAN_RX_10G_LIODN(1, 1, 95), +}; +int fman1_liodn_tbl_sz = ARRAY_SIZE(fman1_liodn_tbl); +#endif + +struct liodn_id_table sec_liodn_tbl[] = { + SET_SEC_JR_LIODN_ENTRY(0, 454, 458), + SET_SEC_JR_LIODN_ENTRY(1, 455, 459), + SET_SEC_JR_LIODN_ENTRY(2, 456, 460), + SET_SEC_JR_LIODN_ENTRY(3, 457, 461), + SET_SEC_RTIC_LIODN_ENTRY(a, 453), + SET_SEC_RTIC_LIODN_ENTRY(b, 549), + SET_SEC_RTIC_LIODN_ENTRY(c, 550), + SET_SEC_RTIC_LIODN_ENTRY(d, 551), + SET_SEC_DECO_LIODN_ENTRY(0, 541, 610), + SET_SEC_DECO_LIODN_ENTRY(1, 542, 611), + SET_SEC_DECO_LIODN_ENTRY(2, 543, 612), + SET_SEC_DECO_LIODN_ENTRY(3, 544, 613), + SET_SEC_DECO_LIODN_ENTRY(4, 545, 614), + SET_SEC_DECO_LIODN_ENTRY(5, 546, 615), + SET_SEC_DECO_LIODN_ENTRY(6, 547, 616), + SET_SEC_DECO_LIODN_ENTRY(7, 548, 617), +}; +int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl); + +#ifdef CONFIG_SYS_DPAA_RMAN +struct liodn_id_table rman_liodn_tbl[] = { + /* Set RMan block 0-3 liodn offset */ + SET_RMAN_LIODN(0, 6), + SET_RMAN_LIODN(1, 7), + SET_RMAN_LIODN(2, 8), + SET_RMAN_LIODN(3, 9), +}; +int rman_liodn_tbl_sz = ARRAY_SIZE(rman_liodn_tbl); +#endif + +struct liodn_id_table liodn_bases[] = { +#ifdef CONFIG_SYS_DPAA_DCE + [FSL_HW_PORTAL_DCE] = SET_LIODN_BASE_2(618, 694), +#endif + [FSL_HW_PORTAL_SEC] = SET_LIODN_BASE_2(462, 558), +#ifdef CONFIG_SYS_DPAA_FMAN + [FSL_HW_PORTAL_FMAN1] = SET_LIODN_BASE_1(973), +#endif +#ifdef CONFIG_SYS_DPAA_PME + [FSL_HW_PORTAL_PME] = SET_LIODN_BASE_2(770, 846), +#endif +#ifdef CONFIG_SYS_DPAA_RMAN + [FSL_HW_PORTAL_RMAN] = SET_LIODN_BASE_1(922), +#endif +}; diff --git a/arch/powerpc/cpu/mpc85xx/t2080_serdes.c b/arch/powerpc/cpu/mpc85xx/t2080_serdes.c new file mode 100644 index 0000000000..f2fbdebec1 --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/t2080_serdes.c @@ -0,0 +1,208 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * Shengzhou Liu <Shengzhou.Liu@freescale.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/fsl_serdes.h> +#include <asm/processor.h> +#include "fsl_corenet2_serdes.h" + +struct serdes_config { + u32 protocol; + u8 lanes[SRDS_MAX_LANES]; +}; + +static const struct serdes_config serdes1_cfg_tbl[] = { + /* SerDes 1 */ + {0x6E, {XFI_FM1_MAC9, XFI_FM1_MAC10, + SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + PCIE4, PCIE4, SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} }, + {0xBC, {PCIE3, PCIE3, SGMII_FM1_DTSEC1, + SGMII_FM1_DTSEC2, PCIE4, PCIE4, PCIE4, PCIE4} }, + {0xC8, {PCIE3, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC1, + SGMII_FM1_DTSEC2, PCIE4, PCIE4, + SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} }, + {0xD6, {PCIE3, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC1, + SGMII_FM1_DTSEC2, PCIE4, PCIE4, + SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} }, + {0xDE, {PCIE3, PCIE3, PCIE3, PCIE3, + PCIE4, PCIE1, PCIE2, SGMII_FM1_DTSEC6} }, + {0xE0, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, + PCIE1, SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} }, + {0xF2, {PCIE3, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC1, + SGMII_FM1_DTSEC2, PCIE4, PCIE1, PCIE2, SGMII_FM1_DTSEC6} }, + {0xF8, {PCIE3, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC1, + SGMII_FM1_DTSEC2, PCIE4, PCIE1, PCIE2, SGMII_FM1_DTSEC6} }, + {0xFA, {PCIE3, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC1, + SGMII_FM1_DTSEC2, PCIE4, PCIE1, + SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} }, + {0x6C, {XFI_FM1_MAC9, XFI_FM1_MAC10, + SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + PCIE4, PCIE4, PCIE4, PCIE4} }, +#if defined(CONFIG_PPC_T2080) + {0x1C, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10, + SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, + SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} }, + {0x95, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10, + SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, + SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} }, + {0xA2, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10, + SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, + SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} }, + {0x94, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10, + SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, + SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} }, + {0x51, {XAUI_FM1_MAC9, XAUI_FM1_MAC9, + XAUI_FM1_MAC9, XAUI_FM1_MAC9, + PCIE4, SGMII_FM1_DTSEC4, + SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} }, + {0x5F, {HIGIG_FM1_MAC9, HIGIG_FM1_MAC9, + HIGIG_FM1_MAC9, HIGIG_FM1_MAC9, + PCIE4, SGMII_FM1_DTSEC4, + SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} }, + {0x65, {HIGIG_FM1_MAC9, HIGIG_FM1_MAC9, + HIGIG_FM1_MAC9, HIGIG_FM1_MAC9, + PCIE4, SGMII_FM1_DTSEC4, + SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} }, + {0x6B, {XFI_FM1_MAC9, XFI_FM1_MAC10, + XFI_FM1_MAC1, XFI_FM1_MAC2, + PCIE4, SGMII_FM1_DTSEC4, + SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} }, + {0x6D, {XFI_FM1_MAC9, XFI_FM1_MAC10, + SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + PCIE4, PCIE4, PCIE4, PCIE4} }, + {0x71, {XFI_FM1_MAC9, XFI_FM1_MAC10, + SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, PCIE4, + SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} }, + {0xA6, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10, + SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, PCIE4, + PCIE4, SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} }, + {0x8E, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10, + SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, PCIE4, + PCIE4, SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} }, + {0x8F, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10, + SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, PCIE4, + PCIE4, SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} }, + {0x82, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10, + SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + PCIE4, PCIE4, SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} }, + {0x83, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10, + SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + PCIE4, PCIE4, SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} }, + {0xA4, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10, + SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + PCIE4, PCIE4, PCIE4, PCIE4} }, + {0x96, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10, + SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + PCIE4, PCIE4, PCIE4, PCIE4} }, + {0x8A, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10, + SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + PCIE4, PCIE4, PCIE4, PCIE4} }, + {0x67, {XFI_FM1_MAC9, XFI_FM1_MAC10, + XFI_FM1_MAC1, XFI_FM1_MAC2, + PCIE4, PCIE4, PCIE4, PCIE4} }, + {0xAB, {PCIE3, PCIE3, PCIE3, PCIE3, + PCIE4, PCIE4, PCIE4, PCIE4} }, + {0xDA, {PCIE3, PCIE3, PCIE3, PCIE3, + PCIE3, PCIE3, PCIE3, PCIE3} }, + {0xD9, {PCIE3, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC1, + SGMII_FM1_DTSEC2, PCIE4, SGMII_FM1_DTSEC4, + SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} }, + {0xD3, {PCIE3, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC1, + SGMII_FM1_DTSEC2, PCIE4, SGMII_FM1_DTSEC4, + SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} }, + {0xCB, {PCIE3, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC1, + SGMII_FM1_DTSEC2, PCIE4, SGMII_FM1_DTSEC4, + SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} }, + {0xD8, {PCIE3, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC1, + SGMII_FM1_DTSEC2, PCIE4, SGMII_FM1_DTSEC4, + SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} }, + {0x66, {XFI_FM1_MAC9, XFI_FM1_MAC10, + XFI_FM1_MAC1, XFI_FM1_MAC2, + PCIE4, PCIE4, PCIE4, PCIE4} }, + +#elif defined(CONFIG_PPC_T2081) + {0xAA, {PCIE3, PCIE3, PCIE3, PCIE3, + PCIE4, PCIE4, PCIE4, PCIE4} }, + {0xCA, {PCIE3, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC1, + SGMII_FM1_DTSEC2, PCIE4, SGMII_FM1_DTSEC4, + SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} }, + {0x70, {XFI_FM1_MAC9, XFI_FM1_MAC10, SGMII_FM1_DTSEC1, + SGMII_FM1_DTSEC2, PCIE4, SGMII_FM1_DTSEC4, + SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} }, +#endif + {} +}; + +#ifndef CONFIG_PPC_T2081 +static const struct serdes_config serdes2_cfg_tbl[] = { + /* SerDes 2 */ + {0x1F, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2} }, + {0x16, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, SATA1, SATA2} }, + {0x01, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1} }, + {0x29, {SRIO2, SRIO2, SRIO2, SRIO2, SRIO1, SRIO1, SRIO1, SRIO1} }, + {0x2D, {SRIO2, SRIO2, SRIO2, SRIO2, SRIO1, SRIO1, SRIO1, SRIO1} }, + {0x15, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, SATA1, SATA2} }, + {0x18, {PCIE1, PCIE1, PCIE1, PCIE1, AURORA, AURORA, SATA1, SATA2} }, + {0x02, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1} }, + {0x36, {SRIO2, SRIO2, SRIO2, SRIO2, AURORA, AURORA, SATA1, SATA2} }, + {} +}; +#endif + +static const struct serdes_config *serdes_cfg_tbl[] = { + serdes1_cfg_tbl, +#ifndef CONFIG_PPC_T2081 + serdes2_cfg_tbl, +#endif +}; + +enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane) +{ + const struct serdes_config *ptr; + + if (serdes >= ARRAY_SIZE(serdes_cfg_tbl)) + return 0; + + ptr = serdes_cfg_tbl[serdes]; + while (ptr->protocol) { + if (ptr->protocol == cfg) + return ptr->lanes[lane]; + ptr++; + } + return 0; +} + +int is_serdes_prtcl_valid(int serdes, u32 prtcl) +{ + int i; + const struct serdes_config *ptr; + + if (serdes >= ARRAY_SIZE(serdes_cfg_tbl)) + return 0; + + ptr = serdes_cfg_tbl[serdes]; + while (ptr->protocol) { + if (ptr->protocol == prtcl) + break; + ptr++; + } + + if (!ptr->protocol) + return 0; + + for (i = 0; i < SRDS_MAX_LANES; i++) { + if (ptr->lanes[i] != NONE) + return 1; + } + + return 0; +} diff --git a/arch/powerpc/cpu/mpc85xx/t4240_ids.c b/arch/powerpc/cpu/mpc85xx/t4240_ids.c index 54c1cfd2c1..f181315134 100644 --- a/arch/powerpc/cpu/mpc85xx/t4240_ids.c +++ b/arch/powerpc/cpu/mpc85xx/t4240_ids.c @@ -86,10 +86,10 @@ struct liodn_id_table liodn_tbl[] = { SET_SATA_LIODN(1, 555), SET_SATA_LIODN(2, 556), - SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 1, 148), - SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 2, 228), - SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 3, 308), - SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 4, 388), + SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 1, 148), + SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 2, 228), + SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 3, 308), + SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 4, 388), SET_DMA_LIODN(1, 147), SET_DMA_LIODN(2, 227), diff --git a/arch/powerpc/cpu/mpc86xx/Makefile b/arch/powerpc/cpu/mpc86xx/Makefile index bcb786dcab..0f790b0efc 100644 --- a/arch/powerpc/cpu/mpc86xx/Makefile +++ b/arch/powerpc/cpu/mpc86xx/Makefile @@ -16,9 +16,6 @@ obj-$(CONFIG_MP) += release.o obj-y += cpu.o obj-y += cpu_init.o -# 8610 & 8641 are identical w/regards to DDR -obj-$(CONFIG_MPC8610) += ddr-8641.o -obj-$(CONFIG_MPC8641) += ddr-8641.o obj-$(CONFIG_OF_LIBFDT) += fdt.o obj-y += interrupts.o obj-$(CONFIG_MP) += mp.o diff --git a/arch/powerpc/cpu/mpc8xxx/Makefile b/arch/powerpc/cpu/mpc8xxx/Makefile index 395fed16b6..f66ee2e423 100644 --- a/arch/powerpc/cpu/mpc8xxx/Makefile +++ b/arch/powerpc/cpu/mpc8xxx/Makefile @@ -25,7 +25,6 @@ obj-y += cpu.o endif obj-$(CONFIG_OF_LIBFDT) += fdt.o -obj-$(CONFIG_FSL_IFC) += fsl_ifc.o obj-$(CONFIG_FSL_LBC) += fsl_lbc.o obj-$(CONFIG_SYS_SRIO) += srio.o obj-$(CONFIG_FSL_LAW) += law.o diff --git a/arch/powerpc/cpu/mpc8xxx/cpu.c b/arch/powerpc/cpu/mpc8xxx/cpu.c index c67be4ef29..35795c4fbe 100644 --- a/arch/powerpc/cpu/mpc8xxx/cpu.c +++ b/arch/powerpc/cpu/mpc8xxx/cpu.c @@ -75,6 +75,8 @@ static struct cpu_type cpu_type_list[] = { CPU_TYPE_ENTRY(T1020, T1020, 0), CPU_TYPE_ENTRY(T1021, T1021, 0), CPU_TYPE_ENTRY(T1022, T1022, 0), + CPU_TYPE_ENTRY(T2080, T2080, 0), + CPU_TYPE_ENTRY(T2081, T2081, 0), CPU_TYPE_ENTRY(BSC9130, 9130, 1), CPU_TYPE_ENTRY(BSC9131, 9131, 1), CPU_TYPE_ENTRY(BSC9132, 9132, 2), diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/Makefile b/arch/powerpc/cpu/mpc8xxx/ddr/Makefile deleted file mode 100644 index 8cbc06c95a..0000000000 --- a/arch/powerpc/cpu/mpc8xxx/ddr/Makefile +++ /dev/null @@ -1,29 +0,0 @@ -# -# Copyright 2008-2011 Freescale Semiconductor, Inc. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License -# Version 2 as published by the Free Software Foundation. -# - -obj-$(CONFIG_FSL_DDR1) += main.o util.o ctrl_regs.o options.o \ - lc_common_dimm_params.o - -obj-$(CONFIG_FSL_DDR2) += main.o util.o ctrl_regs.o options.o \ - lc_common_dimm_params.o - -obj-$(CONFIG_FSL_DDR3) += main.o util.o ctrl_regs.o options.o \ - lc_common_dimm_params.o -ifdef CONFIG_DDR_SPD -SPD := y -endif -ifdef CONFIG_SPD_EEPROM -SPD := y -endif -ifdef SPD -obj-$(CONFIG_FSL_DDR1) += ddr1_dimm_params.o -obj-$(CONFIG_FSL_DDR2) += ddr2_dimm_params.o -obj-$(CONFIG_FSL_DDR3) += ddr3_dimm_params.o -endif - -obj-$(CONFIG_FSL_DDR_INTERACTIVE) += interactive.o diff --git a/arch/powerpc/include/asm/config.h b/arch/powerpc/include/asm/config.h index 3c17c99146..423a6fb8dc 100644 --- a/arch/powerpc/include/asm/config.h +++ b/arch/powerpc/include/asm/config.h @@ -9,10 +9,16 @@ #ifdef CONFIG_MPC85xx #include <asm/config_mpc85xx.h> +#define CONFIG_SYS_FSL_DDR #endif #ifdef CONFIG_MPC86xx #include <asm/config_mpc86xx.h> +#define CONFIG_SYS_FSL_DDR +#endif + +#ifdef CONFIG_MPC83xx +#define CONFIG_SYS_FSL_DDR #endif #ifndef HWCONFIG_BUFFER_SIZE diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h index 4cc12ee70f..99e16bdf63 100644 --- a/arch/powerpc/include/asm/config_mpc85xx.h +++ b/arch/powerpc/include/asm/config_mpc85xx.h @@ -40,17 +40,20 @@ #elif defined(CONFIG_MPC8540) #define CONFIG_MAX_CPUS 1 #define CONFIG_SYS_FSL_NUM_LAWS 8 +#define CONFIG_SYS_FSL_DDRC_GEN1 #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 #elif defined(CONFIG_MPC8541) #define CONFIG_MAX_CPUS 1 #define CONFIG_SYS_FSL_NUM_LAWS 8 +#define CONFIG_SYS_FSL_DDRC_GEN1 #define CONFIG_SYS_FSL_SEC_COMPAT 2 #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 #elif defined(CONFIG_MPC8544) #define CONFIG_MAX_CPUS 1 #define CONFIG_SYS_FSL_NUM_LAWS 10 +#define CONFIG_SYS_FSL_DDRC_GEN2 #define CONFIG_SYS_PPC_E500_DEBUG_TLB 0 #define CONFIG_SYS_FSL_SEC_COMPAT 2 #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 @@ -59,6 +62,7 @@ #elif defined(CONFIG_MPC8548) #define CONFIG_MAX_CPUS 1 #define CONFIG_SYS_FSL_NUM_LAWS 10 +#define CONFIG_SYS_FSL_DDRC_GEN2 #define CONFIG_SYS_PPC_E500_DEBUG_TLB 0 #define CONFIG_SYS_FSL_SEC_COMPAT 2 #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 @@ -77,17 +81,20 @@ #elif defined(CONFIG_MPC8555) #define CONFIG_MAX_CPUS 1 #define CONFIG_SYS_FSL_NUM_LAWS 8 +#define CONFIG_SYS_FSL_DDRC_GEN1 #define CONFIG_SYS_FSL_SEC_COMPAT 2 #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 #elif defined(CONFIG_MPC8560) #define CONFIG_MAX_CPUS 1 #define CONFIG_SYS_FSL_NUM_LAWS 8 +#define CONFIG_SYS_FSL_DDRC_GEN1 #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 #elif defined(CONFIG_MPC8568) #define CONFIG_MAX_CPUS 1 #define CONFIG_SYS_FSL_NUM_LAWS 10 +#define CONFIG_SYS_FSL_DDRC_GEN2 #define CONFIG_SYS_FSL_SEC_COMPAT 2 #define QE_MURAM_SIZE 0x10000UL #define MAX_QE_RISC 2 @@ -674,7 +681,8 @@ #define CONFIG_NUM_DDR_CONTROLLERS 1 #endif -#elif defined(CONFIG_PPC_T1040) +#elif defined(CONFIG_PPC_T1040) || defined(CONFIG_PPC_T1042) ||\ +defined(CONFIG_PPC_T1020) || defined(CONFIG_PPC_T1022) #define CONFIG_E5500 #define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ #define CONFIG_SYS_FSL_QORIQ_CHASSIS2 /* Freescale Chassis generation 2 */ @@ -710,6 +718,50 @@ #define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY #define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000 +#elif defined(CONFIG_PPC_T2080) || defined(CONFIG_PPC_T2081) +#define CONFIG_E6500 +#define CONFIG_SYS_PPC64 /* 64-bit core */ +#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ +#define CONFIG_SYS_FSL_QORIQ_CHASSIS2 /* Freescale Chassis generation 2 */ +#define CONFIG_SYS_FSL_CORES_PER_CLUSTER 4 +#define CONFIG_SYS_FSL_NUM_CC_PLLS 2 +#define CONFIG_SYS_FSL_QMAN_V3 +#define CONFIG_MAX_CPUS 4 +#define CONFIG_SYS_FSL_NUM_LAWS 32 +#define CONFIG_SYS_FSL_SEC_COMPAT 4 +#define CONFIG_SYS_NUM_FMAN 1 +#define CONFIG_SYS_FSL_CLUSTER_CLOCKS { 1, 4, 4, 4 } +#define CONFIG_SYS_FSL_SRDS_1 +#define CONFIG_SYS_FSL_PCI_VER_3_X +#if defined(CONFIG_PPC_T2080) +#define CONFIG_SYS_NUM_FM1_DTSEC 8 +#define CONFIG_SYS_NUM_FM1_10GEC 4 +#define CONFIG_SYS_FSL_SRDS_2 +#define CONFIG_SYS_FSL_SRIO_LIODN +#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2 +#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9 +#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 +#elif defined(CONFIG_PPC_T2081) +#define CONFIG_SYS_NUM_FM1_DTSEC 6 +#define CONFIG_SYS_NUM_FM1_10GEC 2 +#endif +#define CONFIG_SYS_FSL_NUM_USB_CTRLS 2 +#define CONFIG_NUM_DDR_CONTROLLERS 1 +#define CONFIG_PME_PLAT_CLK_DIV 1 +#define CONFIG_SYS_PME_CLK CONFIG_PME_PLAT_CLK_DIV +#define CONFIG_SYS_FM1_CLK 0 +#define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_4_7 +#define CONFIG_SYS_FSL_IFC_BANK_COUNT 8 +#define CONFIG_SYS_FMAN_V3 +#define CONFIG_SYS_FM_MURAM_SIZE 0x28000 +#define CONFIG_SYS_FSL_TBCLK_DIV 16 +#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v3.0" +#define CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE +#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000 +#define CONFIG_SYS_FSL_SFP_VER_3_0 +#define CONFIG_SYS_FSL_ISBC_VER 2 + #elif defined(CONFIG_PPC_C29X) #define CONFIG_MAX_CPUS 1 #define CONFIG_FSL_SDHC_V2_3 @@ -737,4 +789,10 @@ #define CONFIG_SYS_FSL_THREADS_PER_CORE 1 #endif +#if !defined(CONFIG_SYS_FSL_DDRC_GEN1) && \ + !defined(CONFIG_SYS_FSL_DDRC_GEN2) && \ + !defined(CONFIG_SYS_FSL_DDRC_GEN3) +#define CONFIG_SYS_FSL_DDRC_GEN3 +#endif + #endif /* _ASM_MPC85xx_CONFIG_H_ */ diff --git a/arch/powerpc/include/asm/config_mpc86xx.h b/arch/powerpc/include/asm/config_mpc86xx.h index 694b110302..4f9b2252be 100644 --- a/arch/powerpc/include/asm/config_mpc86xx.h +++ b/arch/powerpc/include/asm/config_mpc86xx.h @@ -7,6 +7,8 @@ #ifndef _ASM_MPC86xx_CONFIG_H_ #define _ASM_MPC86xx_CONFIG_H_ +#define CONFIG_SYS_FSL_DDR_86XX + /* SoC specific defines for Freescale MPC86xx processors */ #if defined(CONFIG_MPC8610) diff --git a/arch/powerpc/include/asm/fsl_serdes.h b/arch/powerpc/include/asm/fsl_serdes.h index cce892ce90..404ded4580 100644 --- a/arch/powerpc/include/asm/fsl_serdes.h +++ b/arch/powerpc/include/asm/fsl_serdes.h @@ -62,6 +62,8 @@ enum srds_prtcl { QSGMII_FM1_B, /* B indicates MACs 5,6,9,10 */ QSGMII_FM2_A, QSGMII_FM2_B, + XFI_FM1_MAC1, + XFI_FM1_MAC2, XFI_FM1_MAC9, XFI_FM1_MAC10, XFI_FM2_MAC9, diff --git a/arch/powerpc/include/asm/immap_83xx.h b/arch/powerpc/include/asm/immap_83xx.h index 3c86ff66fd..251840255b 100644 --- a/arch/powerpc/include/asm/immap_83xx.h +++ b/arch/powerpc/include/asm/immap_83xx.h @@ -14,6 +14,7 @@ #ifndef __IMMAP_83xx__ #define __IMMAP_83xx__ +#include <fsl_immap.h> #include <asm/types.h> #include <asm/fsl_i2c.h> #include <asm/mpc8xxx_spi.h> @@ -277,107 +278,10 @@ typedef struct qesba83xx { } qesba83xx_t; /* - * DDR Memory Controller Memory Map + * DDR Memory Controller Memory Map for DDR1 + * The structure of DDR2, or DDR3 is defined in fsl_immap.h */ -#if defined(CONFIG_FSL_DDR2) || defined(CONFIG_FSL_DDR3) -typedef struct ccsr_ddr { - u32 cs0_bnds; /* Chip Select 0 Memory Bounds */ - u8 res1[4]; - u32 cs1_bnds; /* Chip Select 1 Memory Bounds */ - u8 res2[4]; - u32 cs2_bnds; /* Chip Select 2 Memory Bounds */ - u8 res3[4]; - u32 cs3_bnds; /* Chip Select 3 Memory Bounds */ - u8 res4[100]; - u32 cs0_config; /* Chip Select Configuration */ - u32 cs1_config; /* Chip Select Configuration */ - u32 cs2_config; /* Chip Select Configuration */ - u32 cs3_config; /* Chip Select Configuration */ - u8 res4a[48]; - u32 cs0_config_2; /* Chip Select Configuration 2 */ - u32 cs1_config_2; /* Chip Select Configuration 2 */ - u32 cs2_config_2; /* Chip Select Configuration 2 */ - u32 cs3_config_2; /* Chip Select Configuration 2 */ - u8 res5[48]; - u32 timing_cfg_3; /* SDRAM Timing Configuration 3 */ - u32 timing_cfg_0; /* SDRAM Timing Configuration 0 */ - u32 timing_cfg_1; /* SDRAM Timing Configuration 1 */ - u32 timing_cfg_2; /* SDRAM Timing Configuration 2 */ - u32 sdram_cfg; /* SDRAM Control Configuration */ - u32 sdram_cfg_2; /* SDRAM Control Configuration 2 */ - u32 sdram_mode; /* SDRAM Mode Configuration */ - u32 sdram_mode_2; /* SDRAM Mode Configuration 2 */ - u32 sdram_md_cntl; /* SDRAM Mode Control */ - u32 sdram_interval; /* SDRAM Interval Configuration */ - u32 sdram_data_init; /* SDRAM Data initialization */ - u8 res6[4]; - u32 sdram_clk_cntl; /* SDRAM Clock Control */ - u8 res7[20]; - u32 init_addr; /* training init addr */ - u32 init_ext_addr; /* training init extended addr */ - u8 res8_1[16]; - u32 timing_cfg_4; /* SDRAM Timing Configuration 4 */ - u32 timing_cfg_5; /* SDRAM Timing Configuration 5 */ - u8 reg8_1a[8]; - u32 ddr_zq_cntl; /* ZQ calibration control*/ - u32 ddr_wrlvl_cntl; /* write leveling control*/ - u8 reg8_1aa[4]; - u32 ddr_sr_cntr; /* self refresh counter */ - u32 ddr_sdram_rcw_1; /* Control Words 1 */ - u32 ddr_sdram_rcw_2; /* Control Words 2 */ - u8 reg_1ab[8]; - u32 ddr_wrlvl_cntl_2; /* write leveling control 2 */ - u32 ddr_wrlvl_cntl_3; /* write leveling control 3 */ - u8 res8_1b[104]; - u32 sdram_mode_3; /* SDRAM Mode Configuration 3 */ - u32 sdram_mode_4; /* SDRAM Mode Configuration 4 */ - u32 sdram_mode_5; /* SDRAM Mode Configuration 5 */ - u32 sdram_mode_6; /* SDRAM Mode Configuration 6 */ - u32 sdram_mode_7; /* SDRAM Mode Configuration 7 */ - u32 sdram_mode_8; /* SDRAM Mode Configuration 8 */ - u8 res8_1ba[0x908]; - u32 ddr_dsr1; /* Debug Status 1 */ - u32 ddr_dsr2; /* Debug Status 2 */ - u32 ddr_cdr1; /* Control Driver 1 */ - u32 ddr_cdr2; /* Control Driver 2 */ - u8 res8_1c[200]; - u32 ip_rev1; /* IP Block Revision 1 */ - u32 ip_rev2; /* IP Block Revision 2 */ - u32 eor; /* Enhanced Optimization Register */ - u8 res8_2[252]; - u32 mtcr; /* Memory Test Control Register */ - u8 res8_3[28]; - u32 mtp1; /* Memory Test Pattern 1 */ - u32 mtp2; /* Memory Test Pattern 2 */ - u32 mtp3; /* Memory Test Pattern 3 */ - u32 mtp4; /* Memory Test Pattern 4 */ - u32 mtp5; /* Memory Test Pattern 5 */ - u32 mtp6; /* Memory Test Pattern 6 */ - u32 mtp7; /* Memory Test Pattern 7 */ - u32 mtp8; /* Memory Test Pattern 8 */ - u32 mtp9; /* Memory Test Pattern 9 */ - u32 mtp10; /* Memory Test Pattern 10 */ - u8 res8_4[184]; - u32 data_err_inject_hi; /* Data Path Err Injection Mask High */ - u32 data_err_inject_lo; /* Data Path Err Injection Mask Low */ - u32 ecc_err_inject; /* Data Path Err Injection Mask ECC */ - u8 res9[20]; - u32 capture_data_hi; /* Data Path Read Capture High */ - u32 capture_data_lo; /* Data Path Read Capture Low */ - u32 capture_ecc; /* Data Path Read Capture ECC */ - u8 res10[20]; - u32 err_detect; /* Error Detect */ - u32 err_disable; /* Error Disable */ - u32 err_int_en; - u32 capture_attributes; /* Error Attrs Capture */ - u32 capture_address; /* Error Addr Capture */ - u32 capture_ext_address; /* Error Extended Addr Capture */ - u32 err_sbe; /* Single-Bit ECC Error Management */ - u8 res11[164]; - u32 debug[32]; /* debug_1 to debug_32 */ - u8 res12[128]; -} ccsr_ddr_t; -#else +#if !defined(CONFIG_SYS_FSL_DDR2) && !defined(CONFIG_SYS_FSL_DDR3) typedef struct ddr_cs_bnds { u32 csbnds; u8 res0[4]; @@ -739,8 +643,8 @@ typedef struct immap { u8 dll_ddr[0x100]; u8 dll_lbc[0x100]; u8 res1[0xE00]; -#if defined(CONFIG_FSL_DDR2) || defined(CONFIG_FSL_DDR3) - ccsr_ddr_t ddr; /* DDR Memory Controller Memory */ +#if defined(CONFIG_SYS_FSL_DDR2) || defined(CONFIG_SYS_FSL_DDR3) + struct ccsr_ddr ddr; /* DDR Memory Controller Memory */ #else ddr83xx_t ddr; /* DDR Memory Controller Memory */ #endif @@ -763,6 +667,7 @@ typedef struct immap { u8 res7[0xC0000]; } immap_t; +#ifndef CONFIG_MPC834x #ifdef CONFIG_HAS_FSL_MPH_USB #define CONFIG_SYS_MPC83xx_USB1_OFFSET 0x22000 /* use the MPH controller */ #define CONFIG_SYS_MPC83xx_USB2_OFFSET 0 @@ -770,6 +675,10 @@ typedef struct immap { #define CONFIG_SYS_MPC83xx_USB1_OFFSET 0 #define CONFIG_SYS_MPC83xx_USB2_OFFSET 0x23000 /* use the DR controller */ #endif +#else +#define CONFIG_SYS_MPC83xx_USB1_OFFSET 0x22000 +#define CONFIG_SYS_MPC83xx_USB2_OFFSET 0x23000 +#endif #elif defined(CONFIG_MPC8313) typedef struct immap { @@ -1024,7 +933,7 @@ typedef struct immap { #endif #define CONFIG_SYS_MPC8xxx_DDR_OFFSET (0x2000) -#define CONFIG_SYS_MPC8xxx_DDR_ADDR \ +#define CONFIG_SYS_FSL_DDR_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC8xxx_DDR_OFFSET) #define CONFIG_SYS_MPC83xx_DMA_OFFSET (0x8000) #define CONFIG_SYS_MPC83xx_DMA_ADDR \ diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h index 060e0d769b..672e8c6650 100644 --- a/arch/powerpc/include/asm/immap_85xx.h +++ b/arch/powerpc/include/asm/immap_85xx.h @@ -15,9 +15,10 @@ #include <asm/types.h> #include <asm/fsl_dma.h> #include <asm/fsl_i2c.h> -#include <asm/fsl_ifc.h> +#include <fsl_ifc.h> #include <asm/fsl_lbc.h> #include <asm/fsl_fman.h> +#include <fsl_immap.h> typedef struct ccsr_local { u32 ccsrbarh; /* CCSR Base Addr High */ @@ -112,105 +113,6 @@ typedef struct ccsr_local_ecm { u8 res24[492]; } ccsr_local_ecm_t; -/* DDR memory controller registers */ -typedef struct ccsr_ddr { - u32 cs0_bnds; /* Chip Select 0 Memory Bounds */ - u8 res1[4]; - u32 cs1_bnds; /* Chip Select 1 Memory Bounds */ - u8 res2[4]; - u32 cs2_bnds; /* Chip Select 2 Memory Bounds */ - u8 res3[4]; - u32 cs3_bnds; /* Chip Select 3 Memory Bounds */ - u8 res4[100]; - u32 cs0_config; /* Chip Select Configuration */ - u32 cs1_config; /* Chip Select Configuration */ - u32 cs2_config; /* Chip Select Configuration */ - u32 cs3_config; /* Chip Select Configuration */ - u8 res4a[48]; - u32 cs0_config_2; /* Chip Select Configuration 2 */ - u32 cs1_config_2; /* Chip Select Configuration 2 */ - u32 cs2_config_2; /* Chip Select Configuration 2 */ - u32 cs3_config_2; /* Chip Select Configuration 2 */ - u8 res5[48]; - u32 timing_cfg_3; /* SDRAM Timing Configuration 3 */ - u32 timing_cfg_0; /* SDRAM Timing Configuration 0 */ - u32 timing_cfg_1; /* SDRAM Timing Configuration 1 */ - u32 timing_cfg_2; /* SDRAM Timing Configuration 2 */ - u32 sdram_cfg; /* SDRAM Control Configuration */ - u32 sdram_cfg_2; /* SDRAM Control Configuration 2 */ - u32 sdram_mode; /* SDRAM Mode Configuration */ - u32 sdram_mode_2; /* SDRAM Mode Configuration 2 */ - u32 sdram_md_cntl; /* SDRAM Mode Control */ - u32 sdram_interval; /* SDRAM Interval Configuration */ - u32 sdram_data_init; /* SDRAM Data initialization */ - u8 res6[4]; - u32 sdram_clk_cntl; /* SDRAM Clock Control */ - u8 res7[20]; - u32 init_addr; /* training init addr */ - u32 init_ext_addr; /* training init extended addr */ - u8 res8_1[16]; - u32 timing_cfg_4; /* SDRAM Timing Configuration 4 */ - u32 timing_cfg_5; /* SDRAM Timing Configuration 5 */ - u8 reg8_1a[8]; - u32 ddr_zq_cntl; /* ZQ calibration control*/ - u32 ddr_wrlvl_cntl; /* write leveling control*/ - u8 reg8_1aa[4]; - u32 ddr_sr_cntr; /* self refresh counter */ - u32 ddr_sdram_rcw_1; /* Control Words 1 */ - u32 ddr_sdram_rcw_2; /* Control Words 2 */ - u8 reg_1ab[8]; - u32 ddr_wrlvl_cntl_2; /* write leveling control 2 */ - u32 ddr_wrlvl_cntl_3; /* write leveling control 3 */ - u8 res8_1b[104]; - u32 sdram_mode_3; /* SDRAM Mode Configuration 3 */ - u32 sdram_mode_4; /* SDRAM Mode Configuration 4 */ - u32 sdram_mode_5; /* SDRAM Mode Configuration 5 */ - u32 sdram_mode_6; /* SDRAM Mode Configuration 6 */ - u32 sdram_mode_7; /* SDRAM Mode Configuration 7 */ - u32 sdram_mode_8; /* SDRAM Mode Configuration 8 */ - u8 res8_1ba[0x908]; - u32 ddr_dsr1; /* Debug Status 1 */ - u32 ddr_dsr2; /* Debug Status 2 */ - u32 ddr_cdr1; /* Control Driver 1 */ - u32 ddr_cdr2; /* Control Driver 2 */ - u8 res8_1c[200]; - u32 ip_rev1; /* IP Block Revision 1 */ - u32 ip_rev2; /* IP Block Revision 2 */ - u32 eor; /* Enhanced Optimization Register */ - u8 res8_2[252]; - u32 mtcr; /* Memory Test Control Register */ - u8 res8_3[28]; - u32 mtp1; /* Memory Test Pattern 1 */ - u32 mtp2; /* Memory Test Pattern 2 */ - u32 mtp3; /* Memory Test Pattern 3 */ - u32 mtp4; /* Memory Test Pattern 4 */ - u32 mtp5; /* Memory Test Pattern 5 */ - u32 mtp6; /* Memory Test Pattern 6 */ - u32 mtp7; /* Memory Test Pattern 7 */ - u32 mtp8; /* Memory Test Pattern 8 */ - u32 mtp9; /* Memory Test Pattern 9 */ - u32 mtp10; /* Memory Test Pattern 10 */ - u8 res8_4[184]; - u32 data_err_inject_hi; /* Data Path Err Injection Mask High */ - u32 data_err_inject_lo; /* Data Path Err Injection Mask Low */ - u32 ecc_err_inject; /* Data Path Err Injection Mask ECC */ - u8 res9[20]; - u32 capture_data_hi; /* Data Path Read Capture High */ - u32 capture_data_lo; /* Data Path Read Capture Low */ - u32 capture_ecc; /* Data Path Read Capture ECC */ - u8 res10[20]; - u32 err_detect; /* Error Detect */ - u32 err_disable; /* Error Disable */ - u32 err_int_en; - u32 capture_attributes; /* Error Attrs Capture */ - u32 capture_address; /* Error Addr Capture */ - u32 capture_ext_address; /* Error Extended Addr Capture */ - u32 err_sbe; /* Single-Bit ECC Error Management */ - u8 res11[164]; - u32 debug[32]; /* debug_1 to debug_32 */ - u8 res12[128]; -} ccsr_ddr_t; - #define DDR_EOR_RD_BDW_OPT_DIS 0x80000000 /* Read BDW Opt. disable */ #define DDR_EOR_ADDR_HASH_EN 0x40000000 /* Address hash enabled */ @@ -282,7 +184,9 @@ typedef struct ccsr_pcix { u32 int_ack; /* PCIX IRQ Acknowledge */ u8 res000c[52]; u32 liodn_base; /* PCIX LIODN base register */ - u8 res0044[3004]; + u8 res0044[2996]; + u32 ipver1; /* PCIX IP block revision register 1 */ + u32 ipver2; /* PCIX IP block revision register 2 */ u32 potar0; /* PCIX Outbound Transaction Addr 0 */ u32 potear0; /* PCIX Outbound Translation Extended Addr 0 */ u32 powbar0; /* PCIX Outbound Window Base Addr 0 */ @@ -1717,6 +1621,8 @@ typedef struct ccsr_gur { #define FSL_CORENET_DEVDISR2_DTSEC1_10 0x00400000 #define FSL_CORENET_DEVDISR2_10GEC1_1 0x00800000 #define FSL_CORENET_DEVDISR2_10GEC1_2 0x00400000 +#define FSL_CORENET_DEVDISR2_10GEC1_3 0x80000000 +#define FSL_CORENET_DEVDISR2_10GEC1_4 0x40000000 #define FSL_CORENET_DEVDISR2_DTSEC2_1 0x00080000 #define FSL_CORENET_DEVDISR2_DTSEC2_2 0x00040000 #define FSL_CORENET_DEVDISR2_DTSEC2_3 0x00020000 @@ -1847,11 +1753,18 @@ typedef struct ccsr_gur { #define FSL_CORENET2_RCWSR4_SRDS2_PRTCL 0x00ff0000 #define FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT 16 #define FSL_CORENET_RCWSR6_BOOT_LOC 0x0f800000 -#elif defined(CONFIG_PPC_T1040) +#elif defined(CONFIG_PPC_T1040) || defined(CONFIG_PPC_T1042) ||\ +defined(CONFIG_PPC_T1020) || defined(CONFIG_PPC_T1022) #define FSL_CORENET2_RCWSR4_SRDS1_PRTCL 0xff000000 #define FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT 24 #define FSL_CORENET2_RCWSR4_SRDS2_PRTCL 0x00fe0000 #define FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT 17 +#elif defined(CONFIG_PPC_T2080) || defined(CONFIG_PPC_T2081) +#define FSL_CORENET2_RCWSR4_SRDS1_PRTCL 0xff000000 +#define FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT 24 +#define FSL_CORENET2_RCWSR4_SRDS2_PRTCL 0x00ff0000 +#define FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT 16 +#define FSL_CORENET_RCWSR6_BOOT_LOC 0x0f800000 #endif #define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S1_PLL1 0x00800000 #define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S1_PLL2 0x00400000 @@ -1915,6 +1828,15 @@ typedef struct ccsr_gur { #define FSL_CORENET_RCWSR13_EC2_FM1_DTSEC6_RGMII 0x08000000 #define FSL_CORENET_RCWSR13_EC2_FM1_GPIO 0x10000000 #endif +#if defined(CONFIG_PPC_T2080) || defined(CONFIG_PPC_T2081) +#define FSL_CORENET_RCWSR13_EC1 0x60000000 /* bits 417..418 */ +#define FSL_CORENET_RCWSR13_EC1_DTSEC3_RGMII 0x00000000 +#define FSL_CORENET_RCWSR13_EC1_GPIO 0x40000000 +#define FSL_CORENET_RCWSR13_EC2 0x18000000 /* bits 419..420 */ +#define FSL_CORENET_RCWSR13_EC2_DTSEC4_RGMII 0x00000000 +#define FSL_CORENET_RCWSR13_EC2_DTSEC10_RGMII 0x08000000 +#define FSL_CORENET_RCWSR13_EC2_GPIO 0x10000000 +#endif u8 res18[192]; u32 scratchrw[4]; /* Scratch Read/Write */ u8 res19[240]; @@ -2911,6 +2833,7 @@ struct ccsr_pman { #define CONFIG_SYS_FSL_CPC_OFFSET 0x10000 #define CONFIG_SYS_MPC85xx_DMA1_OFFSET 0x100000 #define CONFIG_SYS_MPC85xx_DMA2_OFFSET 0x101000 +#define CONFIG_SYS_MPC85xx_DMA3_OFFSET 0x102000 #define CONFIG_SYS_MPC85xx_DMA_OFFSET CONFIG_SYS_MPC85xx_DMA1_OFFSET #define CONFIG_SYS_MPC85xx_ESPI_OFFSET 0x110000 #define CONFIG_SYS_MPC85xx_ESDHC_OFFSET 0x114000 @@ -3045,11 +2968,11 @@ struct ccsr_pman { (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_RCPM_OFFSET) #define CONFIG_SYS_MPC85xx_ECM_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_ECM_OFFSET) -#define CONFIG_SYS_MPC8xxx_DDR_ADDR \ +#define CONFIG_SYS_FSL_DDR_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC8xxx_DDR_OFFSET) -#define CONFIG_SYS_MPC8xxx_DDR2_ADDR \ +#define CONFIG_SYS_FSL_DDR2_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC8xxx_DDR2_OFFSET) -#define CONFIG_SYS_MPC8xxx_DDR3_ADDR \ +#define CONFIG_SYS_FSL_DDR3_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC8xxx_DDR3_OFFSET) #define CONFIG_SYS_LBC_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_LBC_OFFSET) diff --git a/arch/powerpc/include/asm/immap_86xx.h b/arch/powerpc/include/asm/immap_86xx.h index 2a704fe6b7..177918b7f9 100644 --- a/arch/powerpc/include/asm/immap_86xx.h +++ b/arch/powerpc/include/asm/immap_86xx.h @@ -10,6 +10,7 @@ #ifndef __IMMAP_86xx__ #define __IMMAP_86xx__ +#include <fsl_immap.h> #include <asm/types.h> #include <asm/fsl_dma.h> #include <asm/fsl_lbc.h> @@ -89,75 +90,6 @@ typedef struct ccsr_local_mcm { char res31[488]; } ccsr_local_mcm_t; -/* DDR memory controller registers(0x2000-0x3000) and (0x6000-0x7000) */ - -typedef struct ccsr_ddr { - uint cs0_bnds; /* 0x2000 - DDR Chip Select 0 Memory Bounds */ - char res1[4]; - uint cs1_bnds; /* 0x2008 - DDR Chip Select 1 Memory Bounds */ - char res2[4]; - uint cs2_bnds; /* 0x2010 - DDR Chip Select 2 Memory Bounds */ - char res3[4]; - uint cs3_bnds; /* 0x2018 - DDR Chip Select 3 Memory Bounds */ - char res4[4]; - uint cs4_bnds; /* 0x2020 - DDR Chip Select 4 Memory Bounds */ - char res5[4]; - uint cs5_bnds; /* 0x2028 - DDR Chip Select 5 Memory Bounds */ - char res6[84]; - uint cs0_config; /* 0x2080 - DDR Chip Select Configuration */ - uint cs1_config; /* 0x2084 - DDR Chip Select Configuration */ - uint cs2_config; /* 0x2088 - DDR Chip Select Configuration */ - uint cs3_config; /* 0x208c - DDR Chip Select Configuration */ - uint cs4_config; /* 0x2090 - DDR Chip Select Configuration */ - uint cs5_config; /* 0x2094 - DDR Chip Select Configuration */ - char res7[104]; - uint timing_cfg_3; /* 0x2100 - DDR SDRAM Timing Configuration Register 3 */ - uint timing_cfg_0; /* 0x2104 - DDR SDRAM Timing Configuration Register 0 */ - uint timing_cfg_1; /* 0x2108 - DDR SDRAM Timing Configuration Register 1 */ - uint timing_cfg_2; /* 0x210c - DDR SDRAM Timing Configuration Register 2 */ - uint sdram_cfg; /* 0x2110 - DDR SDRAM Control Configuration 1 */ - uint sdram_cfg_2; /* 0x2114 - DDR SDRAM Control Configuration 2 */ - uint sdram_mode; /* 0x2118 - DDR SDRAM Mode Configuration 1 */ - uint sdram_mode_2; /* 0x211c - DDR SDRAM Mode Configuration 2 */ - uint sdram_mode_cntl; /* 0x2120 - DDR SDRAM Mode Control */ - uint sdram_interval; /* 0x2124 - DDR SDRAM Interval Configuration */ - uint sdram_data_init; /* 0x2128 - DDR SDRAM Data Initialization */ - char res8[4]; - uint sdram_clk_cntl; /* 0x2130 - DDR SDRAM Clock Control */ - char res9[12]; - uint sdram_ocd_cntl; /* 0x2140 - DDR SDRAM OCD Control */ - uint sdram_ocd_status; /* 0x2144 - DDR SDRAM OCD Status */ - uint init_addr; /* 0x2148 - DDR training initialzation address */ - uint init_ext_addr; /* 0x214C - DDR training initialzation extended address */ - char res10[2728]; - uint ip_rev1; /* 0x2BF8 - DDR IP Block Revision 1 */ - uint ip_rev2; /* 0x2BFC - DDR IP Block Revision 2 */ - char res11[512]; - uint data_err_inject_hi; /* 0x2e00 - DDR Memory Data Path Error Injection Mask High */ - uint data_err_inject_lo; /* 0x2e04 - DDR Memory Data Path Error Injection Mask Low */ - uint ecc_err_inject; /* 0x2e08 - DDR Memory Data Path Error Injection Mask ECC */ - char res12[20]; - uint capture_data_hi; /* 0x2e20 - DDR Memory Data Path Read Capture High */ - uint capture_data_lo; /* 0x2e24 - DDR Memory Data Path Read Capture Low */ - uint capture_ecc; /* 0x2e28 - DDR Memory Data Path Read Capture ECC */ - char res13[20]; - uint err_detect; /* 0x2e40 - DDR Memory Error Detect */ - uint err_disable; /* 0x2e44 - DDR Memory Error Disable */ - uint err_int_en; /* 0x2e48 - DDR Memory Error Interrupt Enable */ - uint capture_attributes; /* 0x2e4c - DDR Memory Error Attributes Capture */ - uint capture_address; /* 0x2e50 - DDR Memory Error Address Capture */ - uint capture_ext_address; /* 0x2e54 - DDR Memory Error Extended Address Capture */ - uint err_sbe; /* 0x2e58 - DDR Memory Single-Bit ECC Error Management */ - char res14[164]; - uint debug_1; /* 0x2f00 */ - uint debug_2; - uint debug_3; - uint debug_4; - uint debug_5; - char res15[236]; -} ccsr_ddr_t; - - /* Daul I2C Registers(0x3000-0x4000) */ typedef struct ccsr_i2c { struct fsl_i2c i2c[2]; @@ -1225,11 +1157,11 @@ typedef struct ccsr_wdt { typedef struct immap { ccsr_local_mcm_t im_local_mcm; - ccsr_ddr_t im_ddr1; + struct ccsr_ddr im_ddr1; ccsr_i2c_t im_i2c; ccsr_duart_t im_duart; fsl_lbc_t im_lbc; - ccsr_ddr_t im_ddr2; + struct ccsr_ddr im_ddr2; char res1[4096]; ccsr_pex_t im_pex1; ccsr_pex_t im_pex2; @@ -1253,9 +1185,9 @@ typedef struct immap { extern immap_t *immr; #define CONFIG_SYS_MPC8xxx_DDR_OFFSET 0x2000 -#define CONFIG_SYS_MPC8xxx_DDR_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC8xxx_DDR_OFFSET) +#define CONFIG_SYS_FSL_DDR_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC8xxx_DDR_OFFSET) #define CONFIG_SYS_MPC8xxx_DDR2_OFFSET 0x6000 -#define CONFIG_SYS_MPC8xxx_DDR2_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC8xxx_DDR2_OFFSET) +#define CONFIG_SYS_FSL_DDR2_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC8xxx_DDR2_OFFSET) #define CONFIG_SYS_MPC86xx_DMA_OFFSET 0x21000 #define CONFIG_SYS_MPC86xx_DMA_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC86xx_DMA_OFFSET) #define CONFIG_SYS_MPC86xx_PIC_OFFSET 0x40000 diff --git a/arch/powerpc/include/asm/mpc85xx_gpio.h b/arch/powerpc/include/asm/mpc85xx_gpio.h index 3d1188467c..87bb4a092b 100644 --- a/arch/powerpc/include/asm/mpc85xx_gpio.h +++ b/arch/powerpc/include/asm/mpc85xx_gpio.h @@ -20,7 +20,7 @@ static inline void mpc85xx_gpio_set(unsigned int mask, unsigned int dir, unsigned int val) { - ccsr_gpio_t *gpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR + 0xc00); + ccsr_gpio_t *gpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR); /* First mask off the unwanted parts of "dir" and "val" */ dir &= mask; @@ -56,7 +56,7 @@ static inline void mpc85xx_gpio_set_high(unsigned int gpios) static inline unsigned int mpc85xx_gpio_get(unsigned int mask) { - ccsr_gpio_t *gpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR + 0xc00); + ccsr_gpio_t *gpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR); /* Read the requested values */ return in_be32(&gpio->gpdat) & mask; diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index 81f9d38e79..831804c5c5 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -1127,6 +1127,8 @@ #define SVR_T1020 0x852100 #define SVR_T1021 0x852101 #define SVR_T1022 0x852102 +#define SVR_T2080 0x853000 +#define SVR_T2081 0x853100 #define SVR_8610 0x80A000 #define SVR_8641 0x809000 diff --git a/arch/sandbox/cpu/Makefile b/arch/sandbox/cpu/Makefile index 404ff6793f..58c2537762 100644 --- a/arch/sandbox/cpu/Makefile +++ b/arch/sandbox/cpu/Makefile @@ -10,5 +10,7 @@ obj-y := cpu.o os.o start.o state.o # os.c is build in the system environment, so needs standard includes -$(obj)os.o: ALL_CFLAGS := $(filter-out -nostdinc,$(ALL_CFLAGS)) -$(obj).depend.os: CPPFLAGS := $(filter-out -nostdinc,$(CPPFLAGS)) +$(obj)os.o: ALL_CFLAGS := $(BASE_CPPFLAGS) \ + $(patsubst %, -idirafter %, $(BASE_INCLUDE_DIRS)) +$(obj).depend.os: CPPFLAGS := $(BASE_CPPFLAGS) \ + $(patsubst %, -idirafter %, $(BASE_INCLUDE_DIRS)) diff --git a/arch/sandbox/cpu/os.c b/arch/sandbox/cpu/os.c index c2e5f57193..db66fd31f2 100644 --- a/arch/sandbox/cpu/os.c +++ b/arch/sandbox/cpu/os.c @@ -8,6 +8,7 @@ #include <fcntl.h> #include <getopt.h> #include <stdio.h> +#include <stdint.h> #include <stdlib.h> #include <string.h> #include <termios.h> @@ -136,7 +137,7 @@ void os_usleep(unsigned long usec) usleep(usec); } -u64 __attribute__((no_instrument_function)) os_get_nsec(void) +uint64_t __attribute__((no_instrument_function)) os_get_nsec(void) { #if defined(CLOCK_MONOTONIC) && defined(_POSIX_MONOTONIC_CLOCK) struct timespec tp; diff --git a/arch/sandbox/include/asm/io.h b/arch/sandbox/include/asm/io.h index 9ac6a5f00d..7956041171 100644 --- a/arch/sandbox/include/asm/io.h +++ b/arch/sandbox/include/asm/io.h @@ -38,6 +38,6 @@ static inline void unmap_sysmem(const void *vaddr) } /* Map from a pointer to our RAM buffer */ -phys_addr_t map_to_sysmem(void *ptr); +phys_addr_t map_to_sysmem(const void *ptr); #endif diff --git a/arch/sandbox/include/asm/types.h b/arch/sandbox/include/asm/types.h index 88c84bae7c..6d3eb1f3de 100644 --- a/arch/sandbox/include/asm/types.h +++ b/arch/sandbox/include/asm/types.h @@ -48,8 +48,8 @@ typedef unsigned long long u64; #define BITS_PER_LONG CONFIG_SANDBOX_BITS_PER_LONG typedef unsigned long dma_addr_t; -typedef unsigned long phys_addr_t; -typedef unsigned long phys_size_t; +typedef u32 phys_addr_t; +typedef u32 phys_size_t; #endif /* __KERNEL__ */ diff --git a/arch/sparc/cpu/leon3/start.S b/arch/sparc/cpu/leon3/start.S index bbc1b3476c..cf897f6877 100644 --- a/arch/sparc/cpu/leon3/start.S +++ b/arch/sparc/cpu/leon3/start.S @@ -1,33 +1,41 @@ -#include <config.h> - -TRAP ta 0; nop; nop; nop; - -/* Software trap. Treat as BAD_TRAP for the time being... */ -#define SOFT_TRAP TRAP(_hwerr) - -#define PSR_INIT 0x1FC0 /* Disable traps, set s and ps */ -#define WIM_INIT 2 - -/* All traps low-level code here must end with this macro. */ -#define RESTORE_ALL b ret_trap_entry; clr %l6; - -#define WRITE_PAUSE nop;nop;nop - -WINDOWSIZE = (16 * 4) -ARGPUSHSIZE = (6 * 4) -ARGPUSH = (WINDOWSIZE + 4) -MINFRAME = (WINDOWSIZE + ARGPUSHSIZE + 4) - -/* Number of register windows */ -#ifndef CONFIG_SYS_SPARC_NWINDOWS -#error Must define number of SPARC register windows, default is 8 -#endif - -#define STACK_ALIGN 8 -#define SA(X) (((X)+(STACK_ALIGN-1)) & ~(STACK_ALIGN-1)) +/* This is where the SPARC/LEON3 starts + * Copyright (C) 2007, + * Daniel Hellstrom, daniel@gaisler.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * SPDX-License-Identifier: GPL-2.0+ + */ - .section ".start", "ax" - .globl _starttate */ +#include <asm-offsets.h> +#include <config.h> +#include <asm/asmmacro.h> +#include <asm/winmacro.h> +#include <asm/psr.h> +#include <asm/stack.h> +#include <asm/leon.h> +#include <version.h> + +/* Entry for traps which jump to a programmer-specified trap handler. */ +#define TRAPR(H) \ + wr %g0, 0xfe0, %psr; \ + mov %g0, %tbr; \ + ba (H); \ + mov %g0, %wim; + +#define TRAP(H) \ + mov %psr, %l0; \ + ba (H); \ + nop; nop; + +#define TRAPI(ilevel) \ + mov ilevel, %l7; \ + mov %psr, %l0; \ + b _irq_entry; \ + mov %wim, %l3 + +/* Unexcpected trap will halt the processor by forcing it to error state */ #undef BAD_TRAP #define BAD_TRAP ta 0; nop; nop; nop; diff --git a/board/LEOX/elpt860/u-boot.lds b/board/LEOX/elpt860/u-boot.lds index b30b667eb9..c5e57ec03b 100644 --- a/board/LEOX/elpt860/u-boot.lds +++ b/board/LEOX/elpt860/u-boot.lds @@ -30,10 +30,10 @@ SECTIONS arch/powerpc/cpu/mpc8xx/start.o (.text*) arch/powerpc/cpu/mpc8xx/traps.o (.text*) - common/libcommon.o (.text*) - arch/powerpc/cpu/mpc8xx/libmpc8xx.o (.text*) - board/LEOX/elpt860/libelpt860.o (.text*) - arch/powerpc/lib/libpowerpc.o (.text*) + common/built-in.o (.text*) + arch/powerpc/cpu/mpc8xx/built-in.o (.text*) + board/LEOX/elpt860/built-in.o (.text*) + arch/powerpc/lib/built-in.o (.text*) . = env_offset; common/env_embedded.o (.text*) diff --git a/board/LaCie/edminiv2/Makefile b/board/LaCie/edminiv2/Makefile index 7ca06f5a79..035f6865d9 100644 --- a/board/LaCie/edminiv2/Makefile +++ b/board/LaCie/edminiv2/Makefile @@ -9,8 +9,4 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common) -endif - obj-y := edminiv2.o ../common/common.o diff --git a/board/LaCie/net2big_v2/Makefile b/board/LaCie/net2big_v2/Makefile index 4fa08c5138..f3074af256 100644 --- a/board/LaCie/net2big_v2/Makefile +++ b/board/LaCie/net2big_v2/Makefile @@ -9,10 +9,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common) -endif - obj-y := net2big_v2.o ../common/common.o ifneq ($(and $(CONFIG_KIRKWOOD_GPIO),$(CONFIG_NET2BIG_V2)),) obj-y += ../common/cpld-gpio-bus.o diff --git a/board/LaCie/netspace_v2/Makefile b/board/LaCie/netspace_v2/Makefile index e5357e4bc3..47778d8472 100644 --- a/board/LaCie/netspace_v2/Makefile +++ b/board/LaCie/netspace_v2/Makefile @@ -9,8 +9,4 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common) -endif - obj-y := netspace_v2.o ../common/common.o diff --git a/board/LaCie/wireless_space/Makefile b/board/LaCie/wireless_space/Makefile index 11c535e99a..90a84f4892 100644 --- a/board/LaCie/wireless_space/Makefile +++ b/board/LaCie/wireless_space/Makefile @@ -9,8 +9,4 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common) -endif - obj-y := wireless_space.o ../common/common.o diff --git a/board/Marvell/db64360/Makefile b/board/Marvell/db64360/Makefile index aad4776b88..aefe0a789a 100644 --- a/board/Marvell/db64360/Makefile +++ b/board/Marvell/db64360/Makefile @@ -8,10 +8,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common) -endif - obj-y = db64360.o ../common/flash.o ../common/serial.o ../common/memory.o pci.o \ mv_eth.o ../common/ns16550.o mpsc.o ../common/i2c.o \ sdram_init.o ../common/intel_flash.o ../common/misc.o diff --git a/board/Marvell/db64460/Makefile b/board/Marvell/db64460/Makefile index ea9e57086e..a970f9afde 100644 --- a/board/Marvell/db64460/Makefile +++ b/board/Marvell/db64460/Makefile @@ -8,10 +8,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common) -endif - obj-y += db64460.o ../common/flash.o ../common/serial.o ../common/memory.o pci.o \ mv_eth.o ../common/ns16550.o mpsc.o ../common/i2c.o \ sdram_init.o ../common/intel_flash.o ../common/misc.o diff --git a/board/actux1/u-boot.lds b/board/actux1/u-boot.lds index 12e018f316..4716e4f0e0 100644 --- a/board/actux1/u-boot.lds +++ b/board/actux1/u-boot.lds @@ -16,10 +16,10 @@ SECTIONS .text : { *(.__image_copy_start) arch/arm/cpu/ixp/start.o(.text*) - net/libnet.o(.text*) - board/actux1/libactux1.o(.text*) - arch/arm/cpu/ixp/libixp.o(.text*) - drivers/input/libinput.o(.text*) + net/built-in.o(.text*) + board/actux1/built-in.o(.text*) + arch/arm/cpu/ixp/built-in.o(.text*) + drivers/input/built-in.o(.text*) . = env_offset; common/env_embedded.o(.ppcenv) diff --git a/board/actux2/u-boot.lds b/board/actux2/u-boot.lds index 300273bf7a..f00d7c72b1 100644 --- a/board/actux2/u-boot.lds +++ b/board/actux2/u-boot.lds @@ -16,10 +16,10 @@ SECTIONS .text : { *(.__image_copy_start) arch/arm/cpu/ixp/start.o(.text*) - net/libnet.o(.text*) - board/actux2/libactux2.o(.text*) - arch/arm/cpu/ixp/libixp.o(.text*) - drivers/input/libinput.o(.text*) + net/built-in.o(.text*) + board/actux2/built-in.o(.text*) + arch/arm/cpu/ixp/built-in.o(.text*) + drivers/input/built-in.o(.text*) . = env_offset; common/env_embedded.o(.ppcenv) diff --git a/board/actux3/u-boot.lds b/board/actux3/u-boot.lds index 9c97c533dc..2de3ca60b5 100644 --- a/board/actux3/u-boot.lds +++ b/board/actux3/u-boot.lds @@ -16,10 +16,10 @@ SECTIONS .text : { *(.__image_copy_start) arch/arm/cpu/ixp/start.o(.text*) - net/libnet.o(.text*) - board/actux3/libactux3.o(.text*) - arch/arm/cpu/ixp/libixp.o(.text*) - drivers/input/libinput.o(.text*) + net/built-in.o(.text*) + board/actux3/built-in.o(.text*) + arch/arm/cpu/ixp/built-in.o(.text*) + drivers/input/built-in.o(.text*) . = env_offset; common/env_embedded.o(.ppcenv) diff --git a/board/altera/nios2-generic/Makefile b/board/altera/nios2-generic/Makefile index 84c7bff80f..84690fe04d 100644 --- a/board/altera/nios2-generic/Makefile +++ b/board/altera/nios2-generic/Makefile @@ -6,10 +6,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common) -endif - obj-y := nios2-generic.o obj-$(CONFIG_CMD_IDE) += ../common/cfide.o obj-$(CONFIG_EPLED) += ../common/epled.o diff --git a/board/altera/nios2-generic/config.mk b/board/altera/nios2-generic/config.mk index f9f317c440..a673525195 100644 --- a/board/altera/nios2-generic/config.mk +++ b/board/altera/nios2-generic/config.mk @@ -5,11 +5,7 @@ # SPDX-License-Identifier: GPL-2.0+ # -# we get text_base from board config header, so do not use this -#CONFIG_SYS_TEXT_BASE = do-not-use-me - PLATFORM_CPPFLAGS += -mno-hw-div -mno-hw-mul -PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(VENDOR)/include ifeq ($(debug),1) PLATFORM_CPPFLAGS += -DDEBUG diff --git a/board/atmel/sama5d3xek/sama5d3xek.c b/board/atmel/sama5d3xek/sama5d3xek.c index 0ab8020126..eff94a48b2 100644 --- a/board/atmel/sama5d3xek/sama5d3xek.c +++ b/board/atmel/sama5d3xek/sama5d3xek.c @@ -134,7 +134,8 @@ static void sama5d3xek_lcd_hw_init(void) void lcd_show_board_info(void) { - ulong dram_size, nand_size; + ulong dram_size; + uint64_t nand_size; int i; char temp[32]; @@ -153,7 +154,7 @@ void lcd_show_board_info(void) for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++) nand_size += nand_info[i].size; #endif - lcd_printf("%ld MB SDRAM, %ld MB NAND\n", + lcd_printf("%ld MB SDRAM, %lld MB NAND\n", dram_size >> 20, nand_size >> 20); } #endif /* CONFIG_LCD_INFO */ diff --git a/board/avionic-design/medcom-wide/Makefile b/board/avionic-design/medcom-wide/Makefile index 6c4ab643ef..87e19123b0 100644 --- a/board/avionic-design/medcom-wide/Makefile +++ b/board/avionic-design/medcom-wide/Makefile @@ -7,8 +7,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -$(shell mkdir -p $(obj)../common $(obj)../../nvidia/common) - obj-y := ../common/tamonten.o include ../../nvidia/common/common.mk diff --git a/board/avionic-design/plutux/Makefile b/board/avionic-design/plutux/Makefile index 6c4ab643ef..87e19123b0 100644 --- a/board/avionic-design/plutux/Makefile +++ b/board/avionic-design/plutux/Makefile @@ -7,8 +7,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -$(shell mkdir -p $(obj)../common $(obj)../../nvidia/common) - obj-y := ../common/tamonten.o include ../../nvidia/common/common.mk diff --git a/board/avionic-design/tec/Makefile b/board/avionic-design/tec/Makefile index 6c4ab643ef..87e19123b0 100644 --- a/board/avionic-design/tec/Makefile +++ b/board/avionic-design/tec/Makefile @@ -7,8 +7,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -$(shell mkdir -p $(obj)../common $(obj)../../nvidia/common) - obj-y := ../common/tamonten.o include ../../nvidia/common/common.mk diff --git a/board/cogent/config.mk b/board/cogent/config.mk deleted file mode 100644 index 1452d46a9f..0000000000 --- a/board/cogent/config.mk +++ /dev/null @@ -1,12 +0,0 @@ -# -# (C) Copyright 2000 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -# -# Cogent Modular Architecture -# - -PLATFORM_CPPFLAGS += -I$(TOPDIR) diff --git a/board/cogent/dipsw.c b/board/cogent/dipsw.c index d2027c9758..ecfbc25981 100644 --- a/board/cogent/dipsw.c +++ b/board/cogent/dipsw.c @@ -1,5 +1,5 @@ #include <common.h> -#include <board/cogent/dipsw.h> +#include "dipsw.h" unsigned char dipsw_raw(void) diff --git a/board/cogent/flash.c b/board/cogent/flash.c index d4ae4d0a3c..1da8f10a1f 100644 --- a/board/cogent/flash.c +++ b/board/cogent/flash.c @@ -6,7 +6,7 @@ */ #include <common.h> -#include <board/cogent/flash.h> +#include "flash.h" #include <linux/compiler.h> flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ diff --git a/board/cogent/lcd.c b/board/cogent/lcd.c index 76f5ad103f..8e90f9853a 100644 --- a/board/cogent/lcd.c +++ b/board/cogent/lcd.c @@ -48,7 +48,7 @@ #include <common.h> #include <stdarg.h> -#include <board/cogent/lcd.h> +#include "lcd.h" static char lines[2][LCD_LINE_LENGTH+1]; static int curline; diff --git a/board/cogent/mb.c b/board/cogent/mb.c index 603f1235a4..3eea47d3e8 100644 --- a/board/cogent/mb.c +++ b/board/cogent/mb.c @@ -6,11 +6,11 @@ */ #include <common.h> -#include <board/cogent/dipsw.h> -#include <board/cogent/lcd.h> -#include <board/cogent/rtc.h> -#include <board/cogent/par.h> -#include <board/cogent/pci.h> +#include "dipsw.h" +#include "lcd.h" +#include "rtc.h" +#include "par.h" +#include "pci.h" /* ------------------------------------------------------------------------- */ diff --git a/board/cogent/serial.c b/board/cogent/serial.c index 20631d162d..f0d6b22cfd 100644 --- a/board/cogent/serial.c +++ b/board/cogent/serial.c @@ -4,7 +4,7 @@ */ #include <common.h> -#include <board/cogent/serial.h> +#include "serial.h" #include <serial.h> #include <linux/compiler.h> diff --git a/board/compal/paz00/Makefile b/board/compal/paz00/Makefile index 824cd2ea1f..b2d3b6b4b2 100644 --- a/board/compal/paz00/Makefile +++ b/board/compal/paz00/Makefile @@ -14,8 +14,6 @@ # more details. # -$(shell mkdir -p $(obj)../../nvidia/common) - obj-y := paz00.o include ../../nvidia/common/common.mk diff --git a/board/compulab/cm_t335/u-boot.lds b/board/compulab/cm_t335/u-boot.lds index 3bd96e9c1b..1b609a249a 100644 --- a/board/compulab/cm_t335/u-boot.lds +++ b/board/compulab/cm_t335/u-boot.lds @@ -19,7 +19,7 @@ SECTIONS { *(.__image_copy_start) CPUDIR/start.o (.text*) - board/compulab/cm_t335/libcm_t335.o (.text*) + board/compulab/cm_t335/built-in.o (.text*) *(.text*) } diff --git a/board/compulab/cm_t35/cm_t35.c b/board/compulab/cm_t35/cm_t35.c index b9a996594f..bc8e0cad94 100644 --- a/board/compulab/cm_t35/cm_t35.c +++ b/board/compulab/cm_t35/cm_t35.c @@ -268,6 +268,9 @@ static void cm_t3x_set_common_muxconf(void) /* DVI enable */ MUX_VAL(CP(GPMC_NCS3), (IDIS | PTU | DIS | M4));/*GPMC_nCS3*/ + /* DataImage backlight */ + MUX_VAL(CP(GPMC_NCS7), (IDIS | PTU | DIS | M4));/*GPIO_58*/ + /* CM-T3x Ethernet */ MUX_VAL(CP(GPMC_NCS5), (IDIS | PTU | DIS | M0)); /*GPMC_nCS5*/ MUX_VAL(CP(GPMC_CLK), (IEN | PTD | DIS | M4)); /*GPIO_59*/ @@ -374,6 +377,15 @@ static void cm_t3x_set_common_muxconf(void) MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0)); /*MMC1_DAT1*/ MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | EN | M0)); /*MMC1_DAT2*/ MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | EN | M0)); /*MMC1_DAT3*/ + + /* SPI */ + MUX_VAL(CP(MCBSP1_CLKR), (IEN | PTD | DIS | M1)); /*MCSPI4_CLK*/ + MUX_VAL(CP(MCBSP1_DX), (IEN | PTD | DIS | M1)); /*MCSPI4_SIMO*/ + MUX_VAL(CP(MCBSP1_DR), (IEN | PTD | DIS | M1)); /*MCSPI4_SOMI*/ + MUX_VAL(CP(MCBSP1_FSX), (IEN | PTU | EN | M1)); /*MCSPI4_CS0*/ + + /* display controls */ + MUX_VAL(CP(MCBSP1_FSR), (IDIS | PTU | DIS | M4)); /*GPIO_157*/ } static void cm_t35_set_muxconf(void) @@ -470,7 +482,7 @@ static void setup_net_chip_gmpc(void) &ctrl_base->gpmc_nadv_ale); } -#ifdef CONFIG_DRIVER_OMAP34XX_I2C +#ifdef CONFIG_SYS_I2C_OMAP34XX /* * Routine: reset_net_chip * Description: reset the Ethernet controller via TPS65930 GPIO diff --git a/board/compulab/common/Makefile b/board/compulab/common/Makefile index 831be2e0e7..6d7d06815c 100644 --- a/board/compulab/common/Makefile +++ b/board/compulab/common/Makefile @@ -6,5 +6,5 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-$(CONFIG_DRIVER_OMAP34XX_I2C) += eeprom.o +obj-$(CONFIG_SYS_I2C_OMAP34XX) += eeprom.o obj-$(CONFIG_LCD) += omap3_display.o diff --git a/board/compulab/common/eeprom.h b/board/compulab/common/eeprom.h index cf8c302b2e..e87162930d 100644 --- a/board/compulab/common/eeprom.h +++ b/board/compulab/common/eeprom.h @@ -10,7 +10,7 @@ #ifndef _EEPROM_ #define _EEPROM_ -#ifdef CONFIG_DRIVER_OMAP34XX_I2C +#ifdef CONFIG_SYS_I2C_OMAP34XX int cl_eeprom_read_mac_addr(uchar *buf); u32 cl_eeprom_get_board_rev(void); #else diff --git a/board/compulab/common/omap3_display.c b/board/compulab/common/omap3_display.c index ead821eeb7..61707f5b90 100644 --- a/board/compulab/common/omap3_display.c +++ b/board/compulab/common/omap3_display.c @@ -14,6 +14,7 @@ #include <stdio_dev.h> #include <asm/arch/dss.h> #include <lcd.h> +#include <scf0403_lcd.h> #include <asm/arch-omap3/dss.h> DECLARE_GLOBAL_DATA_PTR; @@ -22,6 +23,7 @@ enum display_type { NONE, DVI, DVI_CUSTOM, + DATA_IMAGE, /* #define CONFIG_SCF0403_LCD to use */ }; #define CMAP_ADDR 0x80100000 @@ -119,6 +121,18 @@ static const struct panel_config preset_dvi_1280X1024 = { .gfx_format = GFXFORMAT_RGB16, }; +static const struct panel_config preset_dataimage_480X800 = { + .lcd_size = PANEL_LCD_SIZE(480, 800), + .timing_h = DSS_HBP(2) | DSS_HFP(2) | DSS_HSW(2), + .timing_v = DSS_VBP(17) | DSS_VFP(20) | DSS_VSW(3), + .pol_freq = DSS_IVS | DSS_IHS | DSS_IPC | DSS_ONOFF, + .divisor = 10 | (1 << 10), + .data_lines = LCD_INTERFACE_18_BIT, + .panel_type = ACTIVE_DISPLAY, + .load_mode = 2, + .gfx_format = GFXFORMAT_RGB16, +}; + /* * set_resolution_params() * @@ -146,6 +160,13 @@ static enum display_type set_dvi_preset(const struct panel_config preset, return DVI; } +static enum display_type set_dataimage_preset(const struct panel_config preset, + int x_res, int y_res) +{ + set_preset(preset, x_res, y_res); + return DATA_IMAGE; +} + /* * parse_mode() - parse the mode parameter of custom lcd settings * @@ -369,6 +390,8 @@ static enum display_type env_parse_displaytype(char *displaytype) return set_dvi_preset(preset_dvi_1280X960, 1280, 960); else if (!strncmp(displaytype, "dvi1280x1024", 12)) return set_dvi_preset(preset_dvi_1280X1024, 1280, 1024); + else if (!strncmp(displaytype, "dataimage480x800", 16)) + return set_dataimage_preset(preset_dataimage_480X800, 480, 800); return NONE; } @@ -401,12 +424,31 @@ void lcd_ctrl_init(void *lcdbase) clrsetbits_le32(&prcm->clksel_dss, 0xF, 3); } +#ifdef CONFIG_SCF0403_LCD +static void scf0403_enable(void) +{ + gpio_direction_output(58, 1); + scf0403_init(157); +} +#else +static inline void scf0403_enable(void) {} +#endif + void lcd_enable(void) { - if (lcd_def == DVI || lcd_def == DVI_CUSTOM) { + switch (lcd_def) { + case NONE: + return; + case DVI: + case DVI_CUSTOM: gpio_direction_output(54, 0); /* Turn on DVI */ - omap3_dss_enable(); + break; + case DATA_IMAGE: + scf0403_enable(); + break; } + + omap3_dss_enable(); } void lcd_setcolreg(ushort regno, ushort red, ushort green, ushort blue) {} diff --git a/board/compulab/trimslice/Makefile b/board/compulab/trimslice/Makefile index 0818673cbd..f3bd00dbf1 100644 --- a/board/compulab/trimslice/Makefile +++ b/board/compulab/trimslice/Makefile @@ -5,8 +5,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -$(shell mkdir -p $(obj)../../nvidia/common) - obj-y := trimslice.o include ../../nvidia/common/common.mk diff --git a/board/davinci/da8xxevm/u-boot-spl-hawk.lds b/board/davinci/da8xxevm/u-boot-spl-hawk.lds index e43130aa67..d49c314490 100644 --- a/board/davinci/da8xxevm/u-boot-spl-hawk.lds +++ b/board/davinci/da8xxevm/u-boot-spl-hawk.lds @@ -19,8 +19,8 @@ SECTIONS .text : { arch/arm/cpu/arm926ejs/start.o (.text*) - arch/arm/cpu/arm926ejs/davinci/libdavinci.o (.text*) - drivers/mtd/nand/libnand.o (.text*) + arch/arm/cpu/arm926ejs/davinci/built-in.o (.text*) + drivers/mtd/nand/built-in.o (.text*) *(.text*) } diff --git a/board/dvlhost/u-boot.lds b/board/dvlhost/u-boot.lds index 057d94b62a..ebcaf447b8 100644 --- a/board/dvlhost/u-boot.lds +++ b/board/dvlhost/u-boot.lds @@ -16,10 +16,10 @@ SECTIONS .text : { *(.__image_copy_start) arch/arm/cpu/ixp/start.o(.text*) - net/libnet.o(.text*) - board/dvlhost/libdvlhost.o(.text*) - arch/arm/cpu/ixp/libixp.o(.text*) - drivers/serial/libserial.o(.text*) + net/built-in.o(.text*) + board/dvlhost/built-in.o(.text*) + arch/arm/cpu/ixp/built-in.o(.text*) + drivers/serial/built-in.o(.text*) . = env_offset; common/env_embedded.o(.ppcenv) diff --git a/board/emk/top5200/Makefile b/board/emk/top5200/Makefile index 0930d484fb..b455c26e17 100644 --- a/board/emk/top5200/Makefile +++ b/board/emk/top5200/Makefile @@ -5,8 +5,4 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common) -endif - obj-y := top5200.o ../common/flash.o ../common/vpd.o ../common/am79c874.o diff --git a/board/emk/top860/Makefile b/board/emk/top860/Makefile index b2645f6347..0401639ce3 100644 --- a/board/emk/top860/Makefile +++ b/board/emk/top860/Makefile @@ -5,7 +5,4 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common) -endif obj-y = top860.o ../common/flash.o ../common/vpd.o ../common/am79c874.o diff --git a/board/esd/adciop/Makefile b/board/esd/adciop/Makefile index a096e44418..d0e264de92 100644 --- a/board/esd/adciop/Makefile +++ b/board/esd/adciop/Makefile @@ -5,8 +5,4 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common) -endif - obj-y = adciop.o flash.o ../common/misc.o ../common/pci.o diff --git a/board/esd/apc405/Makefile b/board/esd/apc405/Makefile index c6ab1a5e21..ada8bfd3d3 100644 --- a/board/esd/apc405/Makefile +++ b/board/esd/apc405/Makefile @@ -5,10 +5,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common) -endif - obj-y = apc405.o \ ../common/misc.o \ ../common/auto_update.o diff --git a/board/esd/ar405/Makefile b/board/esd/ar405/Makefile index 2d16313e8d..dd54f546a6 100644 --- a/board/esd/ar405/Makefile +++ b/board/esd/ar405/Makefile @@ -5,8 +5,4 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common) -endif - obj-y = ar405.o flash.o ../common/misc.o diff --git a/board/esd/ash405/Makefile b/board/esd/ash405/Makefile index 4c866ee0aa..aab8de44bc 100644 --- a/board/esd/ash405/Makefile +++ b/board/esd/ash405/Makefile @@ -5,10 +5,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common) -endif - obj-y = ash405.o flash.o \ ../common/misc.o \ ../common/esd405ep_nand.o \ diff --git a/board/esd/cms700/Makefile b/board/esd/cms700/Makefile index 8cfe3baf79..2bf50066c4 100644 --- a/board/esd/cms700/Makefile +++ b/board/esd/cms700/Makefile @@ -5,10 +5,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common/xilinx_jtag) -endif - # Objects for Xilinx JTAG programming (CPLD) CPLD = ../common/xilinx_jtag/lenval.o \ ../common/xilinx_jtag/micro.o \ diff --git a/board/esd/cpci2dp/Makefile b/board/esd/cpci2dp/Makefile index 1d1502071e..ce2c6dd912 100644 --- a/board/esd/cpci2dp/Makefile +++ b/board/esd/cpci2dp/Makefile @@ -5,8 +5,4 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common) -endif - obj-y = cpci2dp.o flash.o ../common/misc.o ../common/cmd_loadpci.o diff --git a/board/esd/cpci405/Makefile b/board/esd/cpci405/Makefile index 1af7e9454d..b140571796 100644 --- a/board/esd/cpci405/Makefile +++ b/board/esd/cpci405/Makefile @@ -5,9 +5,5 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common) -endif - obj-y = cpci405.o flash.o ../common/misc.o ../common/auto_update.o obj-y += ../common/cmd_loadpci.o diff --git a/board/esd/cpci5200/Makefile b/board/esd/cpci5200/Makefile index fb6c0e20e4..8421f54869 100644 --- a/board/esd/cpci5200/Makefile +++ b/board/esd/cpci5200/Makefile @@ -5,10 +5,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -# ifneq ($(OBJTREE),$(SRCTREE)) -# $(shell mkdir -p $(obj)../common/xilinx_jtag) -# endif - # Objects for Xilinx JTAG programming (CPLD) # CPLD = ../common/xilinx_jtag/lenval.o \ # ../common/xilinx_jtag/micro.o \ diff --git a/board/esd/cpci750/Makefile b/board/esd/cpci750/Makefile index 8b3dc33704..a3300c9f4a 100644 --- a/board/esd/cpci750/Makefile +++ b/board/esd/cpci750/Makefile @@ -8,10 +8,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../../Marvell/common) -endif - obj-y = misc.o obj-y += cpci750.o serial.o ../../Marvell/common/memory.o pci.o \ mv_eth.o mpsc.o i2c.o \ diff --git a/board/esd/cpciiser4/Makefile b/board/esd/cpciiser4/Makefile index 4d3c34ae42..b8d6bea6dc 100644 --- a/board/esd/cpciiser4/Makefile +++ b/board/esd/cpciiser4/Makefile @@ -5,8 +5,4 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common) -endif - obj-y = cpciiser4.o flash.o ../common/misc.o diff --git a/board/esd/dasa_sim/Makefile b/board/esd/dasa_sim/Makefile index f0a5a8f09b..eb9f5f86d0 100644 --- a/board/esd/dasa_sim/Makefile +++ b/board/esd/dasa_sim/Makefile @@ -5,8 +5,4 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common) -endif - obj-y = dasa_sim.o flash.o cmd_dasa_sim.o eeprom.o ../common/pci.o diff --git a/board/esd/dp405/Makefile b/board/esd/dp405/Makefile index 6809c673ce..cfcfb66a15 100644 --- a/board/esd/dp405/Makefile +++ b/board/esd/dp405/Makefile @@ -5,10 +5,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common/xilinx_jtag) -endif - # Objects for Xilinx JTAG programming (CPLD) CPLD = ../common/xilinx_jtag/lenval.o \ ../common/xilinx_jtag/micro.o \ diff --git a/board/esd/du405/Makefile b/board/esd/du405/Makefile index 12ce41a9a8..7914eab355 100644 --- a/board/esd/du405/Makefile +++ b/board/esd/du405/Makefile @@ -5,8 +5,4 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common) -endif - obj-y = du405.o flash.o ../common/misc.o diff --git a/board/esd/hh405/Makefile b/board/esd/hh405/Makefile index 0507f1b4dd..fba21a3ae2 100644 --- a/board/esd/hh405/Makefile +++ b/board/esd/hh405/Makefile @@ -5,10 +5,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common) -endif - obj-y = hh405.o flash.o \ ../common/misc.o \ ../common/esd405ep_nand.o \ diff --git a/board/esd/hub405/Makefile b/board/esd/hub405/Makefile index 5447a959c0..99e18b567f 100644 --- a/board/esd/hub405/Makefile +++ b/board/esd/hub405/Makefile @@ -5,10 +5,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common) -endif - obj-y = hub405.o flash.o \ ../common/misc.o \ ../common/esd405ep_nand.o \ diff --git a/board/esd/ocrtc/Makefile b/board/esd/ocrtc/Makefile index 0d9a6fdc43..44b7d5d072 100644 --- a/board/esd/ocrtc/Makefile +++ b/board/esd/ocrtc/Makefile @@ -5,8 +5,4 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common) -endif - obj-y = ocrtc.o flash.o ../common/misc.o cmd_ocrtc.o diff --git a/board/esd/pci405/Makefile b/board/esd/pci405/Makefile index 2f8706bd6e..9e659c796c 100644 --- a/board/esd/pci405/Makefile +++ b/board/esd/pci405/Makefile @@ -5,9 +5,5 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common) -endif - obj-y = pci405.o flash.o ../common/misc.o cmd_pci405.o obj-y += writeibm.o diff --git a/board/esd/pf5200/Makefile b/board/esd/pf5200/Makefile index a9d20c90b1..a54289c073 100644 --- a/board/esd/pf5200/Makefile +++ b/board/esd/pf5200/Makefile @@ -5,10 +5,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -# ifneq ($(OBJTREE),$(SRCTREE)) -# $(shell mkdir -p $(obj)../common/xilinx_jtag) -# endif - # Objects for Xilinx JTAG programming (CPLD) # CPLD = ../common/xilinx_jtag/lenval.o \ # ../common/xilinx_jtag/micro.o \ diff --git a/board/esd/plu405/Makefile b/board/esd/plu405/Makefile index 45b962f69a..6ffae677b1 100644 --- a/board/esd/plu405/Makefile +++ b/board/esd/plu405/Makefile @@ -5,10 +5,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common) -endif - obj-y = plu405.o flash.o \ ../common/misc.o \ ../common/esd405ep_nand.o \ diff --git a/board/esd/pmc405/Makefile b/board/esd/pmc405/Makefile index f4aa1c9eea..ad98207f3e 100644 --- a/board/esd/pmc405/Makefile +++ b/board/esd/pmc405/Makefile @@ -5,10 +5,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common/xilinx_jtag) -endif - # Objects for Xilinx JTAG programming (CPLD) CPLD = ../common/xilinx_jtag/lenval.o \ ../common/xilinx_jtag/micro.o \ diff --git a/board/esd/pmc405de/Makefile b/board/esd/pmc405de/Makefile index 7d5b273c0f..b3f6dcd1e7 100644 --- a/board/esd/pmc405de/Makefile +++ b/board/esd/pmc405de/Makefile @@ -5,10 +5,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common) -endif - obj-y = pmc405de.o obj-$(CONFIG_CMD_CHIP_CONFIG) += chip_config.o obj-y += ../common/cmd_loadpci.o diff --git a/board/esd/pmc440/Makefile b/board/esd/pmc440/Makefile index b1318c7429..708e9d138e 100644 --- a/board/esd/pmc440/Makefile +++ b/board/esd/pmc440/Makefile @@ -5,10 +5,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common) -endif - obj-y = pmc440.o cmd_pmc440.o sdram.o fpga.o \ ../common/cmd_loadpci.o extra-y += init.o diff --git a/board/esd/voh405/Makefile b/board/esd/voh405/Makefile index 8fcfa37dc0..3d82399ed1 100644 --- a/board/esd/voh405/Makefile +++ b/board/esd/voh405/Makefile @@ -5,10 +5,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common) -endif - obj-y = voh405.o flash.o \ ../common/misc.o \ ../common/esd405ep_nand.o \ diff --git a/board/esd/vom405/Makefile b/board/esd/vom405/Makefile index c8a4a4e4c7..7cf5c0224c 100644 --- a/board/esd/vom405/Makefile +++ b/board/esd/vom405/Makefile @@ -5,10 +5,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common/xilinx_jtag) -endif - # Objects for Xilinx JTAG programming (CPLD) CPLD = ../common/xilinx_jtag/lenval.o \ ../common/xilinx_jtag/micro.o \ diff --git a/board/esd/wuh405/Makefile b/board/esd/wuh405/Makefile index 046ebad301..b9beeffc57 100644 --- a/board/esd/wuh405/Makefile +++ b/board/esd/wuh405/Makefile @@ -5,10 +5,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common) -endif - obj-y = wuh405.o flash.o \ ../common/misc.o \ ../common/esd405ep_nand.o \ diff --git a/board/esteem192e/u-boot.lds b/board/esteem192e/u-boot.lds index 87642d6b40..59a86bfdc0 100644 --- a/board/esteem192e/u-boot.lds +++ b/board/esteem192e/u-boot.lds @@ -18,8 +18,8 @@ SECTIONS arch/powerpc/cpu/mpc8xx/start.o (.text*) arch/powerpc/cpu/mpc8xx/traps.o (.text*) - net/libnet.o (.text*) - board/esteem192e/libesteem192e.o (.text*) + net/built-in.o (.text*) + board/esteem192e/built-in.o (.text*) . = env_offset; common/env_embedded.o (.text*) diff --git a/board/exmeritus/hww1u1a/ddr.c b/board/exmeritus/hww1u1a/ddr.c index 23a71d5af5..e1f6865f42 100644 --- a/board/exmeritus/hww1u1a/ddr.c +++ b/board/exmeritus/hww1u1a/ddr.c @@ -9,8 +9,8 @@ #include <common.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, diff --git a/board/exmeritus/hww1u1a/hww1u1a.c b/board/exmeritus/hww1u1a/hww1u1a.c index 7c11e38d1c..97b84b3224 100644 --- a/board/exmeritus/hww1u1a/hww1u1a.c +++ b/board/exmeritus/hww1u1a/hww1u1a.c @@ -13,7 +13,7 @@ #include <asm/cache.h> #include <asm/immap_85xx.h> #include <asm/fsl_pci.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <asm/io.h> #include <miiphy.h> #include <libfdt.h> @@ -37,6 +37,7 @@ int checkboard(void) unsigned int gpio_low = 0; unsigned int gpio_in = 0; unsigned int i; + struct ccsr_ddr __iomem *ddr; puts("Board: HWW-1U-1A "); @@ -89,7 +90,7 @@ int checkboard(void) * and delay a while before we continue. */ if (mpc85xx_gpio_get(GPIO_RESETS)) { - ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC8xxx_DDR_ADDR; + ddr = (struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DDR_ADDR; puts("Debugger detected... extra device reset enabled!\n"); diff --git a/board/freescale/b4860qds/ddr.c b/board/freescale/b4860qds/ddr.c index 2d14923139..187c3b3ebc 100644 --- a/board/freescale/b4860qds/ddr.c +++ b/board/freescale/b4860qds/ddr.c @@ -9,11 +9,11 @@ #include <common.h> #include <i2c.h> #include <hwconfig.h> +#include <fsl_ddr.h> #include <asm/mmu.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> #include <asm/fsl_law.h> -#include <../arch/powerpc/cpu/mpc8xxx/ddr/ddr.h> DECLARE_GLOBAL_DATA_PTR; diff --git a/board/freescale/bsc9131rdb/ddr.c b/board/freescale/bsc9131rdb/ddr.c index a9e92f2ae0..339c576256 100644 --- a/board/freescale/bsc9131rdb/ddr.c +++ b/board/freescale/bsc9131rdb/ddr.c @@ -8,8 +8,8 @@ #include <asm/mmu.h> #include <asm/immap_85xx.h> #include <asm/processor.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> #include <asm/io.h> #include <asm/fsl_law.h> diff --git a/board/freescale/bsc9131rdb/spl_minimal.c b/board/freescale/bsc9131rdb/spl_minimal.c index dd5ea95e33..bd8560b555 100644 --- a/board/freescale/bsc9131rdb/spl_minimal.c +++ b/board/freescale/bsc9131rdb/spl_minimal.c @@ -10,7 +10,7 @@ #include <nand.h> #include <linux/compiler.h> #include <asm/fsl_law.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <asm/global_data.h> DECLARE_GLOBAL_DATA_PTR; @@ -20,7 +20,8 @@ DECLARE_GLOBAL_DATA_PTR; */ static void sdram_init(void) { - ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC8xxx_DDR_ADDR; + struct ccsr_ddr __iomem *ddr = + (struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DDR_ADDR; __raw_writel(CONFIG_SYS_DDR_CS0_BNDS, &ddr->cs0_bnds); __raw_writel(CONFIG_SYS_DDR_CS0_CONFIG, &ddr->cs0_config); diff --git a/board/freescale/bsc9132qds/bsc9132qds.c b/board/freescale/bsc9132qds/bsc9132qds.c index a895e4e297..9377280063 100644 --- a/board/freescale/bsc9132qds/bsc9132qds.c +++ b/board/freescale/bsc9132qds/bsc9132qds.c @@ -17,10 +17,10 @@ #include <tsec.h> #include <mmc.h> #include <netdev.h> -#include <asm/fsl_ifc.h> +#include <fsl_ifc.h> #include <hwconfig.h> #include <i2c.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #ifdef CONFIG_PCI #include <pci.h> @@ -133,16 +133,16 @@ void dsp_ddr_configure(void) *copy the ddr controller settings from PowerPC side DDR controller *to the DSP DDR controller as connected DDR memories are similar. */ - ccsr_ddr_t __iomem *pa_ddr = - (ccsr_ddr_t __iomem *)CONFIG_SYS_MPC8xxx_DDR_ADDR; - ccsr_ddr_t temp_ddr; - ccsr_ddr_t __iomem *dsp_ddr = - (ccsr_ddr_t __iomem *)CONFIG_SYS_FSL_DSP_CCSR_DDR_ADDR; + struct ccsr_ddr __iomem *pa_ddr = + (struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DDR_ADDR; + struct ccsr_ddr temp_ddr; + struct ccsr_ddr __iomem *dsp_ddr = + (struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DSP_CCSR_DDR_ADDR; - memcpy(&temp_ddr, pa_ddr, sizeof(ccsr_ddr_t)); + memcpy(&temp_ddr, pa_ddr, sizeof(struct ccsr_ddr)); temp_ddr.cs0_bnds = CONFIG_SYS_DDR1_CS0_BNDS; temp_ddr.sdram_cfg &= ~SDRAM_CFG_MEM_EN; - memcpy(dsp_ddr, &temp_ddr, sizeof(ccsr_ddr_t)); + memcpy(dsp_ddr, &temp_ddr, sizeof(struct ccsr_ddr)); dsp_ddr->sdram_cfg |= SDRAM_CFG_MEM_EN; } diff --git a/board/freescale/bsc9132qds/ddr.c b/board/freescale/bsc9132qds/ddr.c index b3130be86d..43f163a2c6 100644 --- a/board/freescale/bsc9132qds/ddr.c +++ b/board/freescale/bsc9132qds/ddr.c @@ -8,8 +8,8 @@ #include <asm/mmu.h> #include <asm/immap_85xx.h> #include <asm/processor.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> #include <asm/io.h> #include <asm/fsl_law.h> diff --git a/board/freescale/bsc9132qds/spl_minimal.c b/board/freescale/bsc9132qds/spl_minimal.c index 2bf0a0cfa8..8f71431926 100644 --- a/board/freescale/bsc9132qds/spl_minimal.c +++ b/board/freescale/bsc9132qds/spl_minimal.c @@ -10,14 +10,15 @@ #include <nand.h> #include <linux/compiler.h> #include <asm/fsl_law.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <asm/global_data.h> DECLARE_GLOBAL_DATA_PTR; static void sdram_init(void) { - ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC8xxx_DDR_ADDR; + struct ccsr_ddr __iomem *ddr = + (struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DDR_ADDR; #if CONFIG_DDR_CLK_FREQ == 100000000 __raw_writel(CONFIG_SYS_DDR_CS0_BNDS, &ddr->cs0_bnds); __raw_writel(CONFIG_SYS_DDR_CS0_CONFIG, &ddr->cs0_config); diff --git a/board/freescale/c29xpcie/c29xpcie.c b/board/freescale/c29xpcie/c29xpcie.c index 48c4b308be..f964d6185a 100644 --- a/board/freescale/c29xpcie/c29xpcie.c +++ b/board/freescale/c29xpcie/c29xpcie.c @@ -18,7 +18,7 @@ #include <mmc.h> #include <netdev.h> #include <pci.h> -#include <asm/fsl_ifc.h> +#include <fsl_ifc.h> #include <asm/fsl_pci.h> #include "cpld.h" diff --git a/board/freescale/c29xpcie/ddr.c b/board/freescale/c29xpcie/ddr.c index 57a9b610ea..968655c1b3 100644 --- a/board/freescale/c29xpcie/ddr.c +++ b/board/freescale/c29xpcie/ddr.c @@ -6,8 +6,8 @@ #include <common.h> #include <asm/fsl_law.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> #include "cpld.h" diff --git a/board/freescale/corenet_ds/ddr.c b/board/freescale/corenet_ds/ddr.c index 18e2ff617b..e7e893a1ae 100644 --- a/board/freescale/corenet_ds/ddr.c +++ b/board/freescale/corenet_ds/ddr.c @@ -10,8 +10,8 @@ #include <i2c.h> #include <hwconfig.h> #include <asm/mmu.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> #include <asm/fsl_law.h> DECLARE_GLOBAL_DATA_PTR; diff --git a/board/freescale/corenet_ds/eth_p4080.c b/board/freescale/corenet_ds/eth_p4080.c index e5beb55177..5cbec7f5f2 100644 --- a/board/freescale/corenet_ds/eth_p4080.c +++ b/board/freescale/corenet_ds/eth_p4080.c @@ -12,7 +12,7 @@ #include <asm/cache.h> #include <asm/immap_85xx.h> #include <asm/fsl_law.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <asm/fsl_serdes.h> #include <asm/fsl_portals.h> #include <asm/fsl_liodn.h> diff --git a/board/freescale/corenet_ds/p3041ds_ddr.c b/board/freescale/corenet_ds/p3041ds_ddr.c index 5a8ed94b04..4dead9c045 100644 --- a/board/freescale/corenet_ds/p3041ds_ddr.c +++ b/board/freescale/corenet_ds/p3041ds_ddr.c @@ -7,7 +7,7 @@ */ #include <common.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> fixed_ddr_parm_t fixed_ddr_parm_0[] = { {0, 0, NULL} diff --git a/board/freescale/corenet_ds/p4080ds_ddr.c b/board/freescale/corenet_ds/p4080ds_ddr.c index 844e1d736a..d572a5fbed 100644 --- a/board/freescale/corenet_ds/p4080ds_ddr.c +++ b/board/freescale/corenet_ds/p4080ds_ddr.c @@ -7,7 +7,7 @@ */ #include <common.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #define CONFIG_SYS_DDR_TIMING_3_1200 0x01030000 #define CONFIG_SYS_DDR_TIMING_0_1200 0xCC550104 diff --git a/board/freescale/corenet_ds/p5020ds_ddr.c b/board/freescale/corenet_ds/p5020ds_ddr.c index e65de364d7..9aaf6db997 100644 --- a/board/freescale/corenet_ds/p5020ds_ddr.c +++ b/board/freescale/corenet_ds/p5020ds_ddr.c @@ -7,7 +7,7 @@ */ #include <common.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> fixed_ddr_parm_t fixed_ddr_parm_0[] = { {0, 0, NULL} diff --git a/board/freescale/corenet_ds/p5040ds_ddr.c b/board/freescale/corenet_ds/p5040ds_ddr.c index e65de364d7..9aaf6db997 100644 --- a/board/freescale/corenet_ds/p5040ds_ddr.c +++ b/board/freescale/corenet_ds/p5040ds_ddr.c @@ -7,7 +7,7 @@ */ #include <common.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> fixed_ddr_parm_t fixed_ddr_parm_0[] = { {0, 0, NULL} diff --git a/board/freescale/m52277evb/config.mk b/board/freescale/m52277evb/config.mk deleted file mode 100644 index 0ffb0a204b..0000000000 --- a/board/freescale/m52277evb/config.mk +++ /dev/null @@ -1,11 +0,0 @@ -# -# (C) Copyright 2000-2003 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# Coldfire contribution by Bernhard Kuhn <bkuhn@metrowerks.com> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp - -PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) diff --git a/board/freescale/m52277evb/u-boot.lds b/board/freescale/m52277evb/u-boot.lds index f3337a3845..70121d9248 100644 --- a/board/freescale/m52277evb/u-boot.lds +++ b/board/freescale/m52277evb/u-boot.lds @@ -13,8 +13,8 @@ SECTIONS .text : { arch/m68k/cpu/mcf5227x/start.o (.text*) - arch/m68k/cpu/mcf5227x/libmcf5227x.o (.text*) - arch/m68k/lib/libm68k.o (.text*) + arch/m68k/cpu/mcf5227x/built-in.o (.text*) + arch/m68k/lib/built-in.o (.text*) *(.text*) } diff --git a/board/freescale/m5235evb/config.mk b/board/freescale/m5235evb/config.mk deleted file mode 100644 index 9ab4582bf8..0000000000 --- a/board/freescale/m5235evb/config.mk +++ /dev/null @@ -1,12 +0,0 @@ -# -# (C) Copyright 2000-2003 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# Coldfire contribution by Bernhard Kuhn <bkuhn@metrowerks.com> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -/*CONFIG_SYS_TEXT_BASE = 0xFFC00000*/ -sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp - -PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) diff --git a/board/freescale/m53017evb/u-boot.lds b/board/freescale/m53017evb/u-boot.lds index ef21299ea9..de8d09bf66 100644 --- a/board/freescale/m53017evb/u-boot.lds +++ b/board/freescale/m53017evb/u-boot.lds @@ -12,9 +12,9 @@ SECTIONS /* Read-only sections, merged into text segment: */ .text : { - arch/m68k/cpu/mcf532x/start.o (.text*) - arch/m68k/cpu/mcf532x/libmcf532x.o (.text*) - arch/m68k/lib/libm68k.o (.text*) + arch/m68k/cpu/mcf532x/start.o (.text*) + arch/m68k/cpu/mcf532x/built-in.o (.text*) + arch/m68k/lib/built-in.o (.text*) . = DEFINED(env_offset) ? env_offset : .; common/env_embedded.o (.text*) diff --git a/board/freescale/m54451evb/config.mk b/board/freescale/m54451evb/config.mk deleted file mode 100644 index 0ffb0a204b..0000000000 --- a/board/freescale/m54451evb/config.mk +++ /dev/null @@ -1,11 +0,0 @@ -# -# (C) Copyright 2000-2003 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# Coldfire contribution by Bernhard Kuhn <bkuhn@metrowerks.com> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp - -PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) diff --git a/board/freescale/m54455evb/config.mk b/board/freescale/m54455evb/config.mk deleted file mode 100644 index 0ffb0a204b..0000000000 --- a/board/freescale/m54455evb/config.mk +++ /dev/null @@ -1,11 +0,0 @@ -# -# (C) Copyright 2000-2003 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# Coldfire contribution by Bernhard Kuhn <bkuhn@metrowerks.com> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp - -PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) diff --git a/board/freescale/mpc8349emds/Makefile b/board/freescale/mpc8349emds/Makefile index 23880f52f5..5c315f9f68 100644 --- a/board/freescale/mpc8349emds/Makefile +++ b/board/freescale/mpc8349emds/Makefile @@ -7,4 +7,4 @@ obj-y += mpc8349emds.o obj-$(CONFIG_PCI) += pci.o -obj-$(CONFIG_FSL_DDR2) += ddr.o +obj-$(CONFIG_SYS_FSL_DDR2) += ddr.o diff --git a/board/freescale/mpc8349emds/ddr.c b/board/freescale/mpc8349emds/ddr.c index 3d257d0fbf..aae003d121 100644 --- a/board/freescale/mpc8349emds/ddr.c +++ b/board/freescale/mpc8349emds/ddr.c @@ -6,8 +6,8 @@ #include <common.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> struct board_specific_parameters { u32 n_ranks; diff --git a/board/freescale/mpc8349emds/mpc8349emds.c b/board/freescale/mpc8349emds/mpc8349emds.c index ec48487294..d9092201aa 100644 --- a/board/freescale/mpc8349emds/mpc8349emds.c +++ b/board/freescale/mpc8349emds/mpc8349emds.c @@ -12,8 +12,8 @@ #include <i2c.h> #include <spi.h> #include <miiphy.h> -#ifdef CONFIG_FSL_DDR2 -#include <asm/fsl_ddr_sdram.h> +#ifdef CONFIG_SYS_FSL_DDR2 +#include <fsl_ddr_sdram.h> #else #include <spd_sdram.h> #endif @@ -57,7 +57,7 @@ phys_size_t initdram (int board_type) /* DDR SDRAM - Main SODIMM */ im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR; #if defined(CONFIG_SPD_EEPROM) -#ifndef CONFIG_FSL_DDR2 +#ifndef CONFIG_SYS_FSL_DDR2 msize = spd_sdram() * 1024 * 1024; #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) ddr_enable_ecc(msize); diff --git a/board/freescale/mpc8536ds/ddr.c b/board/freescale/mpc8536ds/ddr.c index d10370c9f2..ebe3ba460c 100644 --- a/board/freescale/mpc8536ds/ddr.c +++ b/board/freescale/mpc8536ds/ddr.c @@ -8,8 +8,8 @@ #include <common.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, diff --git a/board/freescale/mpc8536ds/mpc8536ds.c b/board/freescale/mpc8536ds/mpc8536ds.c index 5daab692c6..467f4f2013 100644 --- a/board/freescale/mpc8536ds/mpc8536ds.c +++ b/board/freescale/mpc8536ds/mpc8536ds.c @@ -12,7 +12,7 @@ #include <asm/cache.h> #include <asm/immap_85xx.h> #include <asm/fsl_pci.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <asm/io.h> #include <asm/fsl_serdes.h> #include <spd.h> @@ -90,7 +90,7 @@ int checkboard (void) phys_size_t fixed_sdram (void) { volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile ccsr_ddr_t *ddr= &immap->im_ddr; + struct ccsr_ddr __iomem *ddr = &immap->im_ddr; uint d_init; ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS; diff --git a/board/freescale/mpc8540ads/ddr.c b/board/freescale/mpc8540ads/ddr.c index 9e79815278..41d4cfe738 100644 --- a/board/freescale/mpc8540ads/ddr.c +++ b/board/freescale/mpc8540ads/ddr.c @@ -8,8 +8,8 @@ #include <common.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, diff --git a/board/freescale/mpc8540ads/mpc8540ads.c b/board/freescale/mpc8540ads/mpc8540ads.c index 175eefcc6b..93288c7e9c 100644 --- a/board/freescale/mpc8540ads/mpc8540ads.c +++ b/board/freescale/mpc8540ads/mpc8540ads.c @@ -14,7 +14,7 @@ #include <asm/processor.h> #include <asm/mmu.h> #include <asm/immap_85xx.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <libfdt.h> #include <fdt_support.h> @@ -168,7 +168,8 @@ void lbc_sdram_init(void) phys_size_t fixed_sdram(void) { #ifndef CONFIG_SYS_RAMBOOT - volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC8xxx_DDR_ADDR); + struct ccsr_ddr __iomem *ddr = + (struct ccsr_ddr __iomem *)(CONFIG_SYS_FSL_DDR_ADDR); ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS; ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG; diff --git a/board/freescale/mpc8541cds/ddr.c b/board/freescale/mpc8541cds/ddr.c index 78d73b0ea8..d2ac6c4ad4 100644 --- a/board/freescale/mpc8541cds/ddr.c +++ b/board/freescale/mpc8541cds/ddr.c @@ -8,8 +8,8 @@ #include <common.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, diff --git a/board/freescale/mpc8541cds/mpc8541cds.c b/board/freescale/mpc8541cds/mpc8541cds.c index 8115e5c69b..7b264dddd1 100644 --- a/board/freescale/mpc8541cds/mpc8541cds.c +++ b/board/freescale/mpc8541cds/mpc8541cds.c @@ -11,7 +11,7 @@ #include <asm/processor.h> #include <asm/mmu.h> #include <asm/immap_85xx.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <ioports.h> #include <spd_sdram.h> #include <libfdt.h> diff --git a/board/freescale/mpc8544ds/ddr.c b/board/freescale/mpc8544ds/ddr.c index 6cf9bc1d75..aa30cabb03 100644 --- a/board/freescale/mpc8544ds/ddr.c +++ b/board/freescale/mpc8544ds/ddr.c @@ -8,8 +8,8 @@ #include <common.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, diff --git a/board/freescale/mpc8544ds/mpc8544ds.c b/board/freescale/mpc8544ds/mpc8544ds.c index dfd8fa6522..1b33db6f31 100644 --- a/board/freescale/mpc8544ds/mpc8544ds.c +++ b/board/freescale/mpc8544ds/mpc8544ds.c @@ -11,7 +11,7 @@ #include <asm/mmu.h> #include <asm/immap_85xx.h> #include <asm/fsl_pci.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <asm/fsl_serdes.h> #include <asm/io.h> #include <miiphy.h> diff --git a/board/freescale/mpc8548cds/ddr.c b/board/freescale/mpc8548cds/ddr.c index 996ffe206d..b31ea3432e 100644 --- a/board/freescale/mpc8548cds/ddr.c +++ b/board/freescale/mpc8548cds/ddr.c @@ -8,8 +8,8 @@ #include <common.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, diff --git a/board/freescale/mpc8548cds/mpc8548cds.c b/board/freescale/mpc8548cds/mpc8548cds.c index 51e4bb5dcb..ca9b43c6b6 100644 --- a/board/freescale/mpc8548cds/mpc8548cds.c +++ b/board/freescale/mpc8548cds/mpc8548cds.c @@ -12,7 +12,7 @@ #include <asm/mmu.h> #include <asm/immap_85xx.h> #include <asm/fsl_pci.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <asm/fsl_serdes.h> #include <miiphy.h> #include <libfdt.h> diff --git a/board/freescale/mpc8555cds/ddr.c b/board/freescale/mpc8555cds/ddr.c index 78d73b0ea8..d2ac6c4ad4 100644 --- a/board/freescale/mpc8555cds/ddr.c +++ b/board/freescale/mpc8555cds/ddr.c @@ -8,8 +8,8 @@ #include <common.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, diff --git a/board/freescale/mpc8555cds/mpc8555cds.c b/board/freescale/mpc8555cds/mpc8555cds.c index e2093d1bbc..de5f5669e6 100644 --- a/board/freescale/mpc8555cds/mpc8555cds.c +++ b/board/freescale/mpc8555cds/mpc8555cds.c @@ -9,7 +9,7 @@ #include <asm/processor.h> #include <asm/mmu.h> #include <asm/immap_85xx.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <ioports.h> #include <spd_sdram.h> #include <libfdt.h> diff --git a/board/freescale/mpc8560ads/ddr.c b/board/freescale/mpc8560ads/ddr.c index 9e79815278..41d4cfe738 100644 --- a/board/freescale/mpc8560ads/ddr.c +++ b/board/freescale/mpc8560ads/ddr.c @@ -8,8 +8,8 @@ #include <common.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, diff --git a/board/freescale/mpc8560ads/mpc8560ads.c b/board/freescale/mpc8560ads/mpc8560ads.c index 90a2522cb9..7104e33156 100644 --- a/board/freescale/mpc8560ads/mpc8560ads.c +++ b/board/freescale/mpc8560ads/mpc8560ads.c @@ -14,7 +14,7 @@ #include <asm/processor.h> #include <asm/mmu.h> #include <asm/immap_85xx.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <ioports.h> #include <spd_sdram.h> #include <miiphy.h> @@ -373,7 +373,7 @@ void lbc_sdram_init(void) phys_size_t fixed_sdram(void) { #ifndef CONFIG_SYS_RAMBOOT - volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC8xxx_DDR_ADDR); + volatile ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_FSL_DDR_ADDR); ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS; ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG; diff --git a/board/freescale/mpc8568mds/ddr.c b/board/freescale/mpc8568mds/ddr.c index b1f4f1f848..6db92ef2da 100644 --- a/board/freescale/mpc8568mds/ddr.c +++ b/board/freescale/mpc8568mds/ddr.c @@ -8,8 +8,8 @@ #include <common.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, diff --git a/board/freescale/mpc8568mds/mpc8568mds.c b/board/freescale/mpc8568mds/mpc8568mds.c index ae80697b38..a8fdcb5f91 100644 --- a/board/freescale/mpc8568mds/mpc8568mds.c +++ b/board/freescale/mpc8568mds/mpc8568mds.c @@ -12,7 +12,7 @@ #include <asm/mmu.h> #include <asm/immap_85xx.h> #include <asm/fsl_pci.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <asm/fsl_serdes.h> #include <spd_sdram.h> #include <i2c.h> diff --git a/board/freescale/mpc8569mds/ddr.c b/board/freescale/mpc8569mds/ddr.c index 68f686b7e6..ef404b1d6f 100644 --- a/board/freescale/mpc8569mds/ddr.c +++ b/board/freescale/mpc8569mds/ddr.c @@ -8,8 +8,8 @@ #include <common.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, diff --git a/board/freescale/mpc8569mds/mpc8569mds.c b/board/freescale/mpc8569mds/mpc8569mds.c index c928a964f9..cb55e1c98c 100644 --- a/board/freescale/mpc8569mds/mpc8569mds.c +++ b/board/freescale/mpc8569mds/mpc8569mds.c @@ -14,7 +14,7 @@ #include <asm/cache.h> #include <asm/immap_85xx.h> #include <asm/fsl_pci.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <asm/fsl_serdes.h> #include <asm/io.h> #include <spd_sdram.h> @@ -231,7 +231,8 @@ int checkboard (void) #if !defined(CONFIG_SPD_EEPROM) phys_size_t fixed_sdram(void) { - volatile ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC8xxx_DDR_ADDR; + struct ccsr_ddr __iomem *ddr = + (struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DDR_ADDR; uint d_init; out_be32(&ddr->cs0_bnds, CONFIG_SYS_DDR_CS0_BNDS); diff --git a/board/freescale/mpc8572ds/ddr.c b/board/freescale/mpc8572ds/ddr.c index 52e4f4224c..2bfc1a170c 100644 --- a/board/freescale/mpc8572ds/ddr.c +++ b/board/freescale/mpc8572ds/ddr.c @@ -8,8 +8,8 @@ #include <common.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> struct board_specific_parameters { u32 n_ranks; diff --git a/board/freescale/mpc8572ds/mpc8572ds.c b/board/freescale/mpc8572ds/mpc8572ds.c index 657df6a718..56863222c8 100644 --- a/board/freescale/mpc8572ds/mpc8572ds.c +++ b/board/freescale/mpc8572ds/mpc8572ds.c @@ -12,7 +12,7 @@ #include <asm/cache.h> #include <asm/immap_85xx.h> #include <asm/fsl_pci.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <asm/io.h> #include <asm/fsl_serdes.h> #include <miiphy.h> @@ -62,7 +62,7 @@ int checkboard (void) phys_size_t fixed_sdram (void) { volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile ccsr_ddr_t *ddr= &immap->im_ddr; + struct ccsr_ddr __iomem *ddr = &immap->im_ddr; uint d_init; ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS; diff --git a/board/freescale/mpc8610hpcd/Makefile b/board/freescale/mpc8610hpcd/Makefile index 933ea179ba..2613004f89 100644 --- a/board/freescale/mpc8610hpcd/Makefile +++ b/board/freescale/mpc8610hpcd/Makefile @@ -4,6 +4,6 @@ # obj-y += mpc8610hpcd.o -obj-$(CONFIG_FSL_DDR2) += ddr.o +obj-$(CONFIG_SYS_FSL_DDR2) += ddr.o obj-y += law.o obj-$(CONFIG_FSL_DIU_FB) += mpc8610hpcd_diu.o diff --git a/board/freescale/mpc8610hpcd/ddr.c b/board/freescale/mpc8610hpcd/ddr.c index 6cf9bc1d75..aa30cabb03 100644 --- a/board/freescale/mpc8610hpcd/ddr.c +++ b/board/freescale/mpc8610hpcd/ddr.c @@ -8,8 +8,8 @@ #include <common.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, diff --git a/board/freescale/mpc8610hpcd/mpc8610hpcd.c b/board/freescale/mpc8610hpcd/mpc8610hpcd.c index ffdcf2444c..d8740ddacc 100644 --- a/board/freescale/mpc8610hpcd/mpc8610hpcd.c +++ b/board/freescale/mpc8610hpcd/mpc8610hpcd.c @@ -10,7 +10,7 @@ #include <asm/processor.h> #include <asm/immap_86xx.h> #include <asm/fsl_pci.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <asm/fsl_serdes.h> #include <i2c.h> #include <asm/io.h> @@ -143,7 +143,7 @@ phys_size_t fixed_sdram(void) { #if !defined(CONFIG_SYS_RAMBOOT) volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile ccsr_ddr_t *ddr = &immap->im_ddr1; + struct ccsr_ddr __iomem *ddr = &immap->im_ddr1; uint d_init; ddr->cs0_bnds = 0x0000001f; diff --git a/board/freescale/mpc8641hpcn/Makefile b/board/freescale/mpc8641hpcn/Makefile index 8d53af8227..86c70bcb9d 100644 --- a/board/freescale/mpc8641hpcn/Makefile +++ b/board/freescale/mpc8641hpcn/Makefile @@ -7,4 +7,4 @@ obj-y += mpc8641hpcn.o obj-y += law.o -obj-$(CONFIG_FSL_DDR2) += ddr.o +obj-$(CONFIG_SYS_FSL_DDR2) += ddr.o diff --git a/board/freescale/mpc8641hpcn/ddr.c b/board/freescale/mpc8641hpcn/ddr.c index 651652a77d..7cd0395651 100644 --- a/board/freescale/mpc8641hpcn/ddr.c +++ b/board/freescale/mpc8641hpcn/ddr.c @@ -8,8 +8,8 @@ #include <common.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> struct board_specific_parameters { u32 n_ranks; diff --git a/board/freescale/mpc8641hpcn/mpc8641hpcn.c b/board/freescale/mpc8641hpcn/mpc8641hpcn.c index 46a543ebcc..a58b5f9cd4 100644 --- a/board/freescale/mpc8641hpcn/mpc8641hpcn.c +++ b/board/freescale/mpc8641hpcn/mpc8641hpcn.c @@ -9,7 +9,7 @@ #include <asm/processor.h> #include <asm/immap_86xx.h> #include <asm/fsl_pci.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <asm/fsl_serdes.h> #include <asm/io.h> #include <libfdt.h> @@ -64,7 +64,7 @@ fixed_sdram(void) { #if !defined(CONFIG_SYS_RAMBOOT) volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile ccsr_ddr_t *ddr = &immap->im_ddr1; + struct ccsr_ddr __iomem *ddr = &immap->im_ddr1; ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS; ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG; diff --git a/board/freescale/mx31ads/u-boot.lds b/board/freescale/mx31ads/u-boot.lds index 6cfca2dab6..1cca176c38 100644 --- a/board/freescale/mx31ads/u-boot.lds +++ b/board/freescale/mx31ads/u-boot.lds @@ -22,11 +22,11 @@ SECTIONS /* WARNING - the following is hand-optimized to fit within */ /* the sector layout of our flash chips! XXX FIXME XXX */ - arch/arm/cpu/arm1136/start.o (.text*) - board/freescale/mx31ads/libmx31ads.o (.text*) - arch/arm/lib/libarm.o (.text*) - net/libnet.o (.text*) - drivers/mtd/libmtd.o (.text*) + arch/arm/cpu/arm1136/start.o (.text*) + board/freescale/mx31ads/built-in.o (.text*) + arch/arm/lib/built-in.o (.text*) + net/built-in.o (.text*) + drivers/mtd/built-in.o (.text*) . = DEFINED(env_offset) ? env_offset : .; common/env_embedded.o(.text*) diff --git a/board/freescale/p1010rdb/README b/board/freescale/p1010rdb/README.P1010RDB-PA index 7f18aaa1b2..158a1b3152 100644 --- a/board/freescale/p1010rdb/README +++ b/board/freescale/p1010rdb/README.P1010RDB-PA @@ -204,5 +204,5 @@ Place uImage, p1010rdb.dtb and rootfs files in the TFTP disk area. => bootm 1000000 3000000 2000000 -Please contact your local field applications engineer or sales representative -to obtain related documents, such as P1010-RDB User Guide for details. +For more details, please refer to P1010RDB User Guide and access website +www.freescale.com diff --git a/board/freescale/p1010rdb/README.P1010RDB-PB b/board/freescale/p1010rdb/README.P1010RDB-PB new file mode 100644 index 0000000000..cf459b339e --- /dev/null +++ b/board/freescale/p1010rdb/README.P1010RDB-PB @@ -0,0 +1,188 @@ +Overview +========= +The P1010RDB-PB is a Freescale Reference Design Board that hosts the P1010 SoC. +P1010RDB-PB is a variation of previous P1010RDB-PA board. + +The P1010 is a cost-effective, low-power, highly integrated host processor +based on a Power Architecture e500v2 core (maximum core frequency 1GHz),that +addresses the requirements of several routing, gateways, storage, consumer, +and industrial applications. Applications of interest include the main CPUs and +I/O processors in network attached storage (NAS), the voice over IP (VoIP) +router/gateway, and wireless LAN (WLAN) and industrial controllers. + +The P1010RDB-PB board features are as following: +Memory subsystem: + - 1G bytes unbuffered DDR3 SDRAM discrete devices (32-bit bus) + - 32M bytes NOR flash single-chip memory + - 2G bytes NAND flash memory + - 16M bytes SPI memory + - 256K bit M24256 I2C EEPROM + - I2C Board EEPROM 128x8 bit memory + - SD/MMC connector to interface with the SD memory card +Interfaces: + - Three 10/100/1000 BaseT Ethernet ports (One RGMII and two SGMII) + - PCIe 2.0: two x1 mini-PCIe slots + - SATA 2.0: two SATA interfaces + - USB 2.0: one USB interface + - FlexCAN: two FlexCAN interfaces (revision 2.0B) + - UART: one USB-to-Serial interface + - TDM: 2 FXS ports connected via an external SLIC to the TDM interface. + 1 FXO port connected via a relay to FXS for switchover to POTS + +Board connectors: + - Mini-ITX power supply connector + - JTAG/COP for debugging + +POR: support critical POR setting changed via switch on board +PCB: 6-layer routing (4-layer signals, 2-layer power and ground) + +Physical Memory Map on P1010RDB +=============================== +Address Start Address End Memory type Attributes +0x0000_0000 0x3fff_ffff DDR 1G Cacheable +0xa000_0000 0xdfff_ffff PCI Express Mem 1G non-cacheable +0xee00_0000 0xefff_ffff NOR Flash 32M non-cacheable +0xffc2_0000 0xffc5_ffff PCI IO range 256K non-cacheable +0xffa0_0000 0xffaf_ffff NAND Flash 1M cacheable +0xffb0_0000 0xffbf_ffff Board CPLD 1M non-cacheable +0xffd0_0000 0xffd0_3fff L1 for Stack 16K Cacheable TLB0 +0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable + + +Serial Port Configuration on P1010RDB +===================================== +Configure the serial port of the attached computer with the following values: + -Data rate: 115200 bps + -Number of data bits: 8 + -Parity: None + -Number of Stop bits: 1 + -Flow Control: Hardware/None + + +P1010RDB-PB default DIP-switch settings +======================================= +SW1[1:8]= 10101010 +SW2[1:8]= 11011000 +SW3[1:8]= 10010000 +SW4[1:4]= 1010 +SW5[1:8]= 11111010 + + +P1010RDB-PB boot mode settings via DIP-switch +============================================= +SW4[1:4]= 1111 and SW3[3:4]= 00 for 16bit NOR boot +SW4[1:4]= 1010 and SW3[3:4]= 01 for 8bit NAND boot +SW4[1:4]= 0110 and SW3[3:4]= 00 for SPI boot +SW4[1:4]= 0111 and SW3[3:4]= 10 for SD boot +Note: 1 stands for 'on', 0 stands for 'off' + + +Switch P1010RDB-PB boot mode via software without setting DIP-switch +==================================================================== +=> run boot_bank0 (boot from NOR bank0) +=> run boot_bank1 (boot from NOR bank1) +=> run boot_nand (boot from NAND flash) +=> run boot_spi (boot from SPI flash) +=> run boot_sd (boot from SD card) + + +Frequency combination support on P1010RDB-PB +============================================= +SW1[4:7] SW5[1] SW5[5:8] SW2[2] Core(MHz) Platform(MHz) DDR(MT/s) +0101 1 1010 0 800 400 800 +1001 1 1010 0 800 400 667 +1010 1 1100 0 667 333 667 +1000 0 1010 0 533 266 667 +0101 1 1010 1 1000 400 800 +1001 1 1010 1 1000 400 667 + + +Setting of pin mux +================== +Since pins multiplexing, TDM and CAN are muxed with SPI flash. +SDHC is muxed with IFC. IFC and SPI flash are enabled by default. + +To enable TDM: +=> setenv hwconfig fsl_p1010mux:tdm_can=tdm +=> save;reset + +To enable FlexCAN: +=> setenv hwconfig fsl_p1010mux:tdm_can=can +=> save;reset + +To enable SDHC in case of NOR/NAND/SPI boot + a) For temporary use case in runtime without reboot system + run 'mux sdhc' in u-boot to validate SDHC with invalidating IFC. + + b) For long-term use case + set 'esdhc' in hwconfig and save it. + +To enable IFC in case of SD boot + a) For temporary use case in runtime without reboot system + run 'mux ifc' in u-boot to validate IFC with invalidating SDHC. + + b) For long-term use case + set 'ifc' in hwconfig and save it. + + +Build images for different boot mode +==================================== +First setup cross compile environment on build host + $ export ARCH=powerpc + $ export CROSS_COMPILE=<your-compiler-path>/powerpc-linux-gnu- + +1. For NOR boot + $ make P1010RDB-PB_NOR + +2. For NAND boot + $ make P1010RDB-PB_NAND + +3. For SPI boot + $ make P1010RDB-PB_SPIFLASH + +4. For SD boot + $ make P1010RDB-PB_SDCARD + + +Steps to program images to flash for different boot mode +======================================================== +1. NOR boot + => tftp 1000000 u-boot.bin + For bank0 + => pro off all;era eff80000 efffffff;cp.b 1000000 eff80000 $filesize + set SW1[8]=0, SW4[1:4]= 1111 and SW3[3:4]= 00, then power on the board + + For bank1 + => pro off all;era eef80000 eeffffff;cp.b 1000000 eef80000 $filesize + set SW1[8]=1, SW4[1:4]= 1111 and SW3[3:4]= 00, then power on the board + +2. NAND boot + => tftp 1000000 u-boot-nand.bin + => nand erase 0 $filesize; nand write $loadaddr 0 $filesize + Set SW4[1:4]= 1010 and SW3[3:4]= 01, then power on the board + +3. SPI boot + 1) cat p1010rdb-config-header.bin u-boot.bin > u-boot-spi-combined.bin + 2) => tftp 1000000 u-boot-spi-combined.bin + 3) => sf probe 0; sf erase 0 100000; sf write 1000000 0 100000 + set SW4[1:4]= 0110 and SW3[3:4]= 00, then power on the board + +4. SD boot + 1) cat p1010rdb-config-header.bin u-boot.bin > u-boot-sd-combined.bin + 2) => tftp 1000000 u-boot-sd-combined.bin + 3) => mux sdhc + 4) => mmc write 1000000 0 1050 + set SW4[1:4]= 0111 and SW3[3:4]= 10, then power on the board + + +Boot Linux from network using TFTP on P1010RDB-PB +================================================= +Place uImage, p1010rdb.dtb and rootfs files in the TFTP download path. + => tftp 1000000 uImage + => tftp 2000000 p1010rdb.dtb + => tftp 3000000 rootfs.ext2.gz.uboot.p1010rdb + => bootm 1000000 3000000 2000000 + + +For more details, please refer to P1010RDB-PB User Guide and access website +www.freescale.com and Freescale QorIQ SDK Infocenter document. diff --git a/board/freescale/p1010rdb/ddr.c b/board/freescale/p1010rdb/ddr.c index ab1b41d832..b0d95ea006 100644 --- a/board/freescale/p1010rdb/ddr.c +++ b/board/freescale/p1010rdb/ddr.c @@ -8,8 +8,8 @@ #include <asm/mmu.h> #include <asm/immap_85xx.h> #include <asm/processor.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> #include <asm/io.h> #include <asm/fsl_law.h> diff --git a/board/freescale/p1010rdb/p1010rdb.c b/board/freescale/p1010rdb/p1010rdb.c index e940d2275e..62caf676c6 100644 --- a/board/freescale/p1010rdb/p1010rdb.c +++ b/board/freescale/p1010rdb/p1010rdb.c @@ -19,7 +19,7 @@ #include <netdev.h> #include <pci.h> #include <asm/fsl_serdes.h> -#include <asm/fsl_ifc.h> +#include <fsl_ifc.h> #include <asm/fsl_pci.h> #include <hwconfig.h> #include <i2c.h> diff --git a/board/freescale/p1010rdb/spl_minimal.c b/board/freescale/p1010rdb/spl_minimal.c index d0e712eb30..39a5a0f37b 100644 --- a/board/freescale/p1010rdb/spl_minimal.c +++ b/board/freescale/p1010rdb/spl_minimal.c @@ -10,7 +10,7 @@ #include <nand.h> #include <asm/mmu.h> #include <asm/immap_85xx.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <asm/fsl_law.h> #include <asm/global_data.h> @@ -19,7 +19,8 @@ DECLARE_GLOBAL_DATA_PTR; void sdram_init(void) { - ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC8xxx_DDR_ADDR; + struct ccsr_ddr __iomem *ddr = + (struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DDR_ADDR; ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; u32 ddr_ratio; unsigned long ddr_freq_mhz; diff --git a/board/freescale/p1022ds/ddr.c b/board/freescale/p1022ds/ddr.c index 94d2c2b0db..09212bcee8 100644 --- a/board/freescale/p1022ds/ddr.c +++ b/board/freescale/p1022ds/ddr.c @@ -8,8 +8,8 @@ #include <common.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> struct board_specific_parameters { u32 n_ranks; diff --git a/board/freescale/p1022ds/p1022ds.c b/board/freescale/p1022ds/p1022ds.c index 3d1951cdba..ba789a4daf 100644 --- a/board/freescale/p1022ds/p1022ds.c +++ b/board/freescale/p1022ds/p1022ds.c @@ -14,7 +14,7 @@ #include <asm/cache.h> #include <asm/immap_85xx.h> #include <asm/fsl_pci.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <asm/fsl_serdes.h> #include <asm/io.h> #include <libfdt.h> diff --git a/board/freescale/p1022ds/spl_minimal.c b/board/freescale/p1022ds/spl_minimal.c index 8b34396843..6c7e1ac3cb 100644 --- a/board/freescale/p1022ds/spl_minimal.c +++ b/board/freescale/p1022ds/spl_minimal.c @@ -9,7 +9,7 @@ #include <asm/io.h> #include <nand.h> #include <asm/fsl_law.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> const static u32 sysclk_tbl[] = { diff --git a/board/freescale/p1023rdb/ddr.c b/board/freescale/p1023rdb/ddr.c index 9fb61fdab3..d587df527a 100644 --- a/board/freescale/p1023rdb/ddr.c +++ b/board/freescale/p1023rdb/ddr.c @@ -8,8 +8,8 @@ #include <asm/mmu.h> #include <asm/immap_85xx.h> #include <asm/processor.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> #include <asm/io.h> #include <asm/fsl_law.h> diff --git a/board/freescale/p1023rdb/p1023rdb.c b/board/freescale/p1023rdb/p1023rdb.c index b52b092069..d2d4f8390a 100644 --- a/board/freescale/p1023rdb/p1023rdb.c +++ b/board/freescale/p1023rdb/p1023rdb.c @@ -16,7 +16,7 @@ #include <asm/mmu.h> #include <asm/immap_85xx.h> #include <asm/fsl_pci.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <asm/fsl_portals.h> #include <libfdt.h> #include <fdt_support.h> diff --git a/board/freescale/p1023rds/p1023rds.c b/board/freescale/p1023rds/p1023rds.c index 7c54b65c1d..d8c87458e8 100644 --- a/board/freescale/p1023rds/p1023rds.c +++ b/board/freescale/p1023rds/p1023rds.c @@ -16,7 +16,7 @@ #include <asm/mmu.h> #include <asm/immap_85xx.h> #include <asm/fsl_pci.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <asm/fsl_portals.h> #include <libfdt.h> #include <fdt_support.h> @@ -58,7 +58,8 @@ int checkboard(void) phys_size_t fixed_sdram(void) { #ifndef CONFIG_SYS_RAMBOOT - ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC8xxx_DDR_ADDR; + struct ccsr_ddr __iomem *ddr = + (struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DDR_ADDR; set_next_law(0, LAW_SIZE_2G, LAW_TRGT_IF_DDR_1); diff --git a/board/freescale/p1_p2_rdb/ddr.c b/board/freescale/p1_p2_rdb/ddr.c index 5bee22e638..17d3beac39 100644 --- a/board/freescale/p1_p2_rdb/ddr.c +++ b/board/freescale/p1_p2_rdb/ddr.c @@ -8,7 +8,7 @@ #include <asm/mmu.h> #include <asm/immap_85xx.h> #include <asm/processor.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <asm/io.h> #include <asm/fsl_law.h> diff --git a/board/freescale/p1_p2_rdb_pc/ddr.c b/board/freescale/p1_p2_rdb_pc/ddr.c index 81cc0930bc..946d5032e7 100644 --- a/board/freescale/p1_p2_rdb_pc/ddr.c +++ b/board/freescale/p1_p2_rdb_pc/ddr.c @@ -10,8 +10,8 @@ #include <asm/mmu.h> #include <asm/immap_85xx.h> #include <asm/processor.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> #include <asm/io.h> #include <asm/fsl_law.h> diff --git a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c index 50553dacd9..966abb24a6 100644 --- a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c +++ b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c @@ -14,7 +14,7 @@ #include <asm/cache.h> #include <asm/immap_85xx.h> #include <asm/fsl_pci.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <asm/io.h> #include <asm/fsl_law.h> #include <asm/fsl_lbc.h> diff --git a/board/freescale/p1_p2_rdb_pc/spl_minimal.c b/board/freescale/p1_p2_rdb_pc/spl_minimal.c index adfa7b1e0f..92437bc787 100644 --- a/board/freescale/p1_p2_rdb_pc/spl_minimal.c +++ b/board/freescale/p1_p2_rdb_pc/spl_minimal.c @@ -10,7 +10,7 @@ #include <nand.h> #include <linux/compiler.h> #include <asm/fsl_law.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <asm/global_data.h> DECLARE_GLOBAL_DATA_PTR; diff --git a/board/freescale/p1_twr/ddr.c b/board/freescale/p1_twr/ddr.c index 67f69d79bd..a2ce75a40d 100644 --- a/board/freescale/p1_twr/ddr.c +++ b/board/freescale/p1_twr/ddr.c @@ -8,8 +8,8 @@ #include <asm/mmu.h> #include <asm/immap_85xx.h> #include <asm/processor.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> #include <asm/io.h> #include <asm/fsl_law.h> diff --git a/board/freescale/p1_twr/p1_twr.c b/board/freescale/p1_twr/p1_twr.c index ea8db6fc07..0e0d0587d7 100644 --- a/board/freescale/p1_twr/p1_twr.c +++ b/board/freescale/p1_twr/p1_twr.c @@ -14,7 +14,7 @@ #include <asm/cache.h> #include <asm/immap_85xx.h> #include <asm/fsl_pci.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <asm/io.h> #include <asm/fsl_law.h> #include <asm/fsl_lbc.h> diff --git a/board/freescale/p2020come/ddr.c b/board/freescale/p2020come/ddr.c index da804771fb..b642e1255c 100644 --- a/board/freescale/p2020come/ddr.c +++ b/board/freescale/p2020come/ddr.c @@ -5,8 +5,8 @@ */ #include <common.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, diff --git a/board/freescale/p2020ds/ddr.c b/board/freescale/p2020ds/ddr.c index b12141f296..debe70b18b 100644 --- a/board/freescale/p2020ds/ddr.c +++ b/board/freescale/p2020ds/ddr.c @@ -8,8 +8,8 @@ #include <common.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> struct board_specific_parameters { u32 n_ranks; @@ -37,7 +37,7 @@ static const struct board_specific_parameters dimm0[] = { * num| hi| clk| cpo|wrdata|2T * ranks| mhz|adjst| | delay| */ -#ifdef CONFIG_FSL_DDR2 +#ifdef CONFIG_SYS_FSL_DDR2 {2, 549, 4, 0x1f, 2, 0}, {2, 680, 4, 0x1f, 3, 0}, {2, 850, 4, 0x1f, 4, 0}, diff --git a/board/freescale/p2020ds/p2020ds.c b/board/freescale/p2020ds/p2020ds.c index 58a42231a9..a0cf927038 100644 --- a/board/freescale/p2020ds/p2020ds.c +++ b/board/freescale/p2020ds/p2020ds.c @@ -12,7 +12,7 @@ #include <asm/cache.h> #include <asm/immap_85xx.h> #include <asm/fsl_pci.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <asm/io.h> #include <asm/fsl_serdes.h> #include <miiphy.h> @@ -68,7 +68,8 @@ int checkboard(void) phys_size_t fixed_sdram(void) { - volatile ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC8xxx_DDR_ADDR; + struct ccsr_ddr __iomem *ddr = + (struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DDR_ADDR; uint d_init; ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG; diff --git a/board/freescale/p2041rdb/ddr.c b/board/freescale/p2041rdb/ddr.c index cc1bfae394..b8bbcdf2a8 100644 --- a/board/freescale/p2041rdb/ddr.c +++ b/board/freescale/p2041rdb/ddr.c @@ -10,8 +10,8 @@ #include <i2c.h> #include <hwconfig.h> #include <asm/mmu.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> #include <asm/fsl_law.h> struct board_specific_parameters { diff --git a/board/freescale/t1040qds/Makefile b/board/freescale/t1040qds/Makefile index a2dba6ff1c..93af9eb6a0 100644 --- a/board/freescale/t1040qds/Makefile +++ b/board/freescale/t1040qds/Makefile @@ -4,7 +4,7 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-y += $(BOARD).o +obj-y += t1040qds.o obj-y += ddr.o obj-$(CONFIG_PCI) += pci.o obj-y += law.o diff --git a/board/freescale/t1040qds/ddr.c b/board/freescale/t1040qds/ddr.c index 4fd17da160..da89a36b96 100644 --- a/board/freescale/t1040qds/ddr.c +++ b/board/freescale/t1040qds/ddr.c @@ -8,8 +8,8 @@ #include <i2c.h> #include <hwconfig.h> #include <asm/mmu.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> #include <asm/fsl_law.h> #include "ddr.h" diff --git a/board/freescale/t1040qds/t1040_pbi.cfg b/board/freescale/t1040qds/t1040_pbi.cfg new file mode 100644 index 0000000000..624398a25d --- /dev/null +++ b/board/freescale/t1040qds/t1040_pbi.cfg @@ -0,0 +1,27 @@ +#PBI commands +#Initialize CPC1 +09010000 00200400 +09138000 00000000 +091380c0 00000100 +#Configure CPC1 as 512KB SRAM +09010100 00000000 +09010104 fffc0007 +09010f00 08000000 +09010000 80000000 +#Configure LAW for CPC1 +09000cf0 00000000 +09000cf4 fffc0000 +09000cf8 81000011 +#Configure alternate space +09000010 00000000 +09000014 ff000000 +09000018 81000000 +#Configure SPI controller +09110000 80000403 +09110020 2d170008 +09110024 00100008 +09110028 00100008 +0911002c 00100008 +#Flush PBL data +09138000 00000000 +091380c0 00000000 diff --git a/board/freescale/t1040qds/t1040_rcw.cfg b/board/freescale/t1040qds/t1040_rcw.cfg new file mode 100644 index 0000000000..0d0dfa5a46 --- /dev/null +++ b/board/freescale/t1040qds/t1040_rcw.cfg @@ -0,0 +1,7 @@ +#PBL preamble and RCW header +aa55aa55 010e0100 +# serdes protocol 0x66 +0a10000c 0c000000 00000000 00000000 +66000002 00000000 fc027000 01000000 +00000000 00000000 00000000 00030810 +00000000 03fc500f 00000000 00000000 diff --git a/board/freescale/t104xrdb/Makefile b/board/freescale/t104xrdb/Makefile new file mode 100644 index 0000000000..76c0c94b0e --- /dev/null +++ b/board/freescale/t104xrdb/Makefile @@ -0,0 +1,12 @@ +# +# Copyright 2013 Freescale Semiconductor, Inc. +# +# SPDX-License-Identifier: GPL-2.0+ +# + + +obj-y += t104xrdb.o +obj-y += ddr.o +obj-$(CONFIG_PCI) += pci.o +obj-y += law.o +obj-y += tlb.o diff --git a/board/freescale/t104xrdb/README b/board/freescale/t104xrdb/README new file mode 100644 index 0000000000..2cd8219c84 --- /dev/null +++ b/board/freescale/t104xrdb/README @@ -0,0 +1,200 @@ +Overview +-------- +The T1040RDB is a Freescale reference board that hosts the T1040 SoC +(and variants). Variants inclued T1042 presonality of T1040, in which +case T1040RDB can also be called T1042RDB. + +The T1042RDB_PI is a Freescale reference board that hosts the T1042 SoC. +(a personality of T1040 SoC). The board is similar to T1040RDB but is +designed specially with low power features targeted for Printing Image Market. + +T1040 SoC Overview +------------------ +The QorIQ T1040/T1042 processor support four integrated 64-bit e5500 PA +processor cores with high-performance data path acceleration architecture +and network peripheral interfaces required for networking & telecommunications. + +The T1040/T1042 SoC includes the following function and features: + + - Four e5500 cores, each with a private 256 KB L2 cache + - 256 KB shared L3 CoreNet platform cache (CPC) + - Interconnect CoreNet platform + - 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and interleaving + support + - Data Path Acceleration Architecture (DPAA) incorporating acceleration + for the following functions: + - Packet parsing, classification, and distribution + - Queue management for scheduling, packet sequencing, and congestion + management + - Cryptography Acceleration (SEC 5.0) + - RegEx Pattern Matching Acceleration (PME 2.2) + - IEEE Std 1588 support + - Hardware buffer management for buffer allocation and deallocation + - Ethernet interfaces + - Integrated 8-port Gigabit Ethernet switch (T1040 only) + - Four 1 Gbps Ethernet controllers + - Two RGMII interfaces or one RGMII and one MII interfaces + - High speed peripheral interfaces + - Four PCI Express 2.0 controllers running at up to 5 GHz + - Two SATA controllers supporting 1.5 and 3.0 Gb/s operation + - Upto two QSGMII interface + - Upto six SGMII interface supporting 1000 Mbps + - One SGMII interface supporting upto 2500 Mbps + - Additional peripheral interfaces + - Two USB 2.0 controllers with integrated PHY + - SD/eSDHC/eMMC + - eSPI controller + - Four I2C controllers + - Four UARTs + - Four GPIO controllers + - Integrated flash controller (IFC) + - LCD and HDMI interface (DIU) with 12 bit dual data rate + - TDM interface + - Multicore programmable interrupt controller (PIC) + - Two 8-channel DMA engines + - Single source clocking implementation + - Deep Sleep power implementaion (wakeup from GPIO/Timer/Ethernet/USB) + +T1040 SoC Personalities +------------------------- + +T1022 Personality: +T1022 is a reduced personality of T1040 with less core/clusters. + +T1042 Personality: +T1042 is a reduced personality of T1040 without Integrated 8-port Gigabit +Ethernet switch. Rest of the blocks are same as T1040 + + +T1040RDB board Overview +------------------------- + - SERDES Connections, 8 lanes information: + 1: None + 2: SGMII + 3: QSGMII + 4: QSGMII + 5: PCIe1 x1 slot + 6: mini PCIe connector + 7: mini PCIe connector + 8: SATA connector + - DDR Controller + - Supports rates of up to 1600 MHz data-rate + - Supports one DDR3LP UDIMM/RDIMMs, of single-, dual- or quad-rank types. + - IFC/Local Bus + - NAND flash: 1GB 8-bit NAND flash + - NOR: 128MB 16-bit NOR Flash + - Ethernet + - Two on-board RGMII 10/100/1G ethernet ports. + - CPLD + - Clocks + - System and DDR clock (SYSCLK, “DDRCLK”) + - SERDES clocks + - Power Supplies + - USB + - Supports two USB 2.0 ports with integrated PHYs + - Two type A ports with 5V@1.5A per port. + - SDHC + - SDHC/SDXC connector + - SPI + - On-board 64MB SPI flash + - Other IO + - Two Serial ports + - Four I2C ports + +T1042RDB_PI board Overview +------------------------- + - SERDES Connections, 8 lanes information: + 1, 2, 3, 4 : PCIe x4 slot + 5: mini PCIe connector + 6: mini PCIe connector + 7: NA + 8: SATA connector + - DDR Controller + - Supports rates of up to 1600 MHz data-rate + - Supports one DDR3LP UDIMM/RDIMMs, of single-, dual- or quad-rank types. + - IFC/Local Bus + - NAND flash: 1GB 8-bit NAND flash + - NOR: 128MB 16-bit NOR Flash + - Ethernet + - Two on-board RGMII 10/100/1G ethernet ports. + - CPLD + - Clocks + - System and DDR clock (SYSCLK, “DDRCLK”) + - SERDES clocks + - Video + - DIU supports video at up to 1280x1024x32bpp + - Power Supplies + - USB + - Supports two USB 2.0 ports with integrated PHYs + - Two type A ports with 5V@1.5A per port. + - SDHC + - SDHC/SDXC connector + - SPI + - On-board 64MB SPI flash + - Other IO + - Two Serial ports + - Four I2C ports + +Memory map +----------- +The addresses in brackets are physical addresses. + +Start Address End Address Description Size +0xF_FFDF_0000 0xF_FFDF_0FFF IFC - CPLD 4KB +0xF_FF80_0000 0xF_FF80_FFFF IFC - NAND Flash 64KB +0xF_FE00_0000 0xF_FEFF_FFFF CCSRBAR 16MB +0xF_F803_0000 0xF_F803_FFFF PCI Express 4 I/O Space 64KB +0xF_F802_0000 0xF_F802_FFFF PCI Express 3 I/O Space 64KB +0xF_F801_0000 0xF_F801_FFFF PCI Express 2 I/O Space 64KB +0xF_F800_0000 0xF_F800_FFFF PCI Express 1 I/O Space 64KB +0xF_F600_0000 0xF_F7FF_FFFF Queue manager software portal 32MB +0xF_F400_0000 0xF_F5FF_FFFF Buffer manager software portal 32MB +0xF_E800_0000 0xF_EFFF_FFFF IFC - NOR Flash 128MB +0xF_0000_0000 0xF_003F_FFFF DCSR 4MB +0xC_3000_0000 0xC_3FFF_FFFF PCI Express 4 Mem Space 256MB +0xC_2000_0000 0xC_2FFF_FFFF PCI Express 3 Mem Space 256MB +0xC_1000_0000 0xC_1FFF_FFFF PCI Express 2 Mem Space 256MB +0xC_0000_0000 0xC_0FFF_FFFF PCI Express 1 Mem Space 256MB +0x0_0000_0000 0x0_ffff_ffff DDR 2GB + + +NOR Flash memory Map +--------------------- + Start End Definition Size +0xEFF80000 0xEFFFFFFF u-boot (current bank) 512KB +0xEFF60000 0xEFF7FFFF u-boot env (current bank) 128KB +0xEFF40000 0xEFF5FFFF FMAN Ucode (current bank) 128KB +0xED300000 0xEFF3FFFF rootfs (alt bank) 44MB + 256KB +0xEC800000 0xEC8FFFF Hardware device tree (alt bank) 1MB +0xEC020000 0xEC7FFFFF Linux.uImage (alt bank) 7MB + 875KB +0xEC000000 0xEC01FFFF RCW (alt bank) 128KB +0xEBF80000 0xEBFFFFFF u-boot (alt bank) 512KB +0xEBF60000 0xEBF7FFFF u-boot env (alt bank) 128KB +0xEBF40000 0xEBF5FFFF FMAN ucode (alt bank) 128KB +0xE9300000 0xEBF3FFFF rootfs (current bank) 44MB + 256KB +0xE8800000 0xE88FFFFF Hardware device tree (cur bank) 11MB + 512KB +0xE8020000 0xE86FFFFF Linux.uImage (current bank) 7MB + 875KB +0xE8000000 0xE801FFFF RCW (current bank) 128KB + + +Various Software configurations/environment variables/commands +-------------------------------------------------------------- +The below commands apply to the board + +1. U-boot environment variable hwconfig + The default hwconfig is: + hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=cs0_cs1;usb1: + dr_mode=host,phy_type=utmi + Note: For USB gadget set "dr_mode=peripheral" + +2. FMAN Ucode versions + fsl_fman_ucode_t1040.bin + +3. Switching to alternate bank + Commands for switching to alternate bank. + + 1. To change from vbank0 to vbank4 + => qixis_reset altbank (it will boot using vbank4) + + 2.To change from vbank4 to vbank0 + => qixis reset (it will boot using vbank0) diff --git a/board/freescale/t104xrdb/ddr.c b/board/freescale/t104xrdb/ddr.c new file mode 100644 index 0000000000..9009afa3ad --- /dev/null +++ b/board/freescale/t104xrdb/ddr.c @@ -0,0 +1,132 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <i2c.h> +#include <hwconfig.h> +#include <asm/mmu.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> +#include <asm/fsl_law.h> +#include "ddr.h" + +DECLARE_GLOBAL_DATA_PTR; + +int fsl_ddr_get_dimm_params(dimm_params_t *pdimm, + unsigned int controller_number, + unsigned int dimm_number) +{ + const char dimm_model[] = "RAW timing DDR"; + + if ((controller_number == 0) && (dimm_number == 0)) { + memcpy(pdimm, &ddr_raw_timing, sizeof(dimm_params_t)); + memset(pdimm->mpart, 0, sizeof(pdimm->mpart)); + memcpy(pdimm->mpart, dimm_model, sizeof(dimm_model) - 1); + } + + return 0; +} + +void fsl_ddr_board_options(memctl_options_t *popts, + dimm_params_t *pdimm, + unsigned int ctrl_num) +{ + const struct board_specific_parameters *pbsp, *pbsp_highest = NULL; + ulong ddr_freq; + + if (ctrl_num > 1) { + printf("Not supported controller number %d\n", ctrl_num); + return; + } + if (!pdimm->n_ranks) + return; + + pbsp = udimms[0]; + + /* Get clk_adjust, cpo, write_data_delay,2t, according to the board ddr + * freqency and n_banks specified in board_specific_parameters table. + */ + ddr_freq = get_ddr_freq(0) / 1000000; + while (pbsp->datarate_mhz_high) { + if (pbsp->n_ranks == pdimm->n_ranks && + (pdimm->rank_density >> 30) >= pbsp->rank_gb) { + if (ddr_freq <= pbsp->datarate_mhz_high) { + popts->cpo_override = pbsp->cpo; + popts->write_data_delay = + pbsp->write_data_delay; + popts->clk_adjust = pbsp->clk_adjust; + popts->wrlvl_start = pbsp->wrlvl_start; + popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2; + popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3; + popts->twot_en = pbsp->force_2t; + goto found; + } + pbsp_highest = pbsp; + } + pbsp++; + } + + if (pbsp_highest) { + printf("Error: board specific timing not found\n"); + printf("for data rate %lu MT/s\n", ddr_freq); + printf("Trying to use the highest speed (%u) parameters\n", + pbsp_highest->datarate_mhz_high); + popts->cpo_override = pbsp_highest->cpo; + popts->write_data_delay = pbsp_highest->write_data_delay; + popts->clk_adjust = pbsp_highest->clk_adjust; + popts->wrlvl_start = pbsp_highest->wrlvl_start; + popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2; + popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3; + popts->twot_en = pbsp_highest->force_2t; + } else { + panic("DIMM is not supported by this board"); + } +found: + debug("Found timing match: n_ranks %d, data rate %d, rank_gb %d\n" + "\tclk_adjust %d, wrlvl_start %d, wrlvl_ctrl_2 0x%x, " + "wrlvl_ctrl_3 0x%x\n", + pbsp->n_ranks, pbsp->datarate_mhz_high, pbsp->rank_gb, + pbsp->clk_adjust, pbsp->wrlvl_start, pbsp->wrlvl_ctl_2, + pbsp->wrlvl_ctl_3); + + /* + * Factors to consider for half-strength driver enable: + * - number of DIMMs installed + */ + popts->half_strength_driver_enable = 0; + /* + * Write leveling override + */ + popts->wrlvl_override = 1; + popts->wrlvl_sample = 0xf; + + /* + * rtt and rtt_wr override + */ + popts->rtt_override = 0; + + /* Enable ZQ calibration */ + popts->zq_en = 1; + + /* DHC_EN =1, ODT = 75 Ohm */ + popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_75ohm); + popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_75ohm); +} + +phys_size_t initdram(int board_type) +{ + phys_size_t dram_size; + + puts("Initializing....using SPD\n"); + + dram_size = fsl_ddr_sdram(); + + dram_size = setup_ddr_tlbs(dram_size / 0x100000); + dram_size *= 0x100000; + + puts(" DDR: "); + return dram_size; +} diff --git a/board/freescale/t104xrdb/ddr.h b/board/freescale/t104xrdb/ddr.h new file mode 100644 index 0000000000..9276b596ac --- /dev/null +++ b/board/freescale/t104xrdb/ddr.h @@ -0,0 +1,76 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __DDR_H__ +#define __DDR_H__ + +dimm_params_t ddr_raw_timing = { + .n_ranks = 2, + .rank_density = 2147483648u, + .capacity = 4294967296u, + .primary_sdram_width = 64, + .ec_sdram_width = 8, + .registered_dimm = 0, + .mirrored_dimm = 1, + .n_row_addr = 15, + .n_col_addr = 10, + .n_banks_per_sdram_device = 8, + .edc_config = 2, /* ECC */ + .burst_lengths_bitmask = 0x0c, + + .tckmin_x_ps = 1071, + .caslat_x = 0x2fe << 4, /* 5,6,7,8,9,10,11,13 */ + .taa_ps = 13910, + .twr_ps = 15000, + .trcd_ps = 13910, + .trrd_ps = 6000, + .trp_ps = 13910, + .tras_ps = 34000, + .trc_ps = 48910, + .trfc_ps = 260000, + .twtr_ps = 7500, + .trtp_ps = 7500, + .refresh_rate_ps = 7800000, + .tfaw_ps = 35000, +}; + +struct board_specific_parameters { + u32 n_ranks; + u32 datarate_mhz_high; + u32 rank_gb; + u32 clk_adjust; + u32 wrlvl_start; + u32 wrlvl_ctl_2; + u32 wrlvl_ctl_3; + u32 cpo; + u32 write_data_delay; + u32 force_2t; +}; + +/* + * These tables contain all valid speeds we want to override with board + * specific parameters. datarate_mhz_high values need to be in ascending order + * for each n_ranks group. + */ + +static const struct board_specific_parameters udimm0[] = { + /* + * memory controller 0 + * num| hi| rank| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T + * ranks| mhz| GB |adjst| start | ctl2 | ctl3 | |delay | + */ + {2, 1066, 4, 8, 4, 0x05070609, 0x08090a08, 0xff, 2, 0}, + {2, 1350, 4, 4, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0}, + {2, 1350, 0, 5, 7, 0x0709090b, 0x0c0c0d09, 0xff, 2, 0}, + {2, 1666, 4, 4, 8, 0x080a0a0d, 0x0d10100b, 0xff, 2, 0}, + {2, 1666, 0, 5, 7, 0x080a0a0c, 0x0d0d0e0a, 0xff, 2, 0}, + {} +}; + +static const struct board_specific_parameters *udimms[] = { + udimm0, +}; +#endif diff --git a/board/freescale/t104xrdb/law.c b/board/freescale/t104xrdb/law.c new file mode 100644 index 0000000000..2362d4324b --- /dev/null +++ b/board/freescale/t104xrdb/law.c @@ -0,0 +1,32 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/fsl_law.h> +#include <asm/mmu.h> + +struct law_entry law_table[] = { +#ifndef CONFIG_SYS_NO_FLASH + SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_IFC), +#endif +#ifdef CONFIG_SYS_BMAN_MEM_PHYS + SET_LAW(CONFIG_SYS_BMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_BMAN), +#endif +#ifdef CONFIG_SYS_QMAN_MEM_PHYS + SET_LAW(CONFIG_SYS_QMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_QMAN), +#endif +#ifdef CONFIG_SYS_CPLD_BASE_PHYS + SET_LAW(CONFIG_SYS_CPLD_BASE_PHYS, LAW_SIZE_128K, LAW_TRGT_IF_IFC), +#endif +#ifdef CONFIG_SYS_DCSRBAR_PHYS + SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_4M, LAW_TRGT_IF_DCSR), +#endif +#ifdef CONFIG_SYS_NAND_BASE_PHYS + SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_IFC), +#endif +}; + +int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/freescale/t104xrdb/pci.c b/board/freescale/t104xrdb/pci.c new file mode 100644 index 0000000000..c53e3b76a4 --- /dev/null +++ b/board/freescale/t104xrdb/pci.c @@ -0,0 +1,23 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <command.h> +#include <pci.h> +#include <asm/fsl_pci.h> +#include <libfdt.h> +#include <fdt_support.h> +#include <asm/fsl_serdes.h> + +void pci_init_board(void) +{ + fsl_pcie_init_board(0); +} + +void pci_of_setup(void *blob, bd_t *bd) +{ + FT_FSL_PCI_SETUP; +} diff --git a/board/freescale/t104xrdb/t104xrdb.c b/board/freescale/t104xrdb/t104xrdb.c new file mode 100644 index 0000000000..6e29d64107 --- /dev/null +++ b/board/freescale/t104xrdb/t104xrdb.c @@ -0,0 +1,93 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <command.h> +#include <netdev.h> +#include <linux/compiler.h> +#include <asm/mmu.h> +#include <asm/processor.h> +#include <asm/cache.h> +#include <asm/immap_85xx.h> +#include <asm/fsl_law.h> +#include <asm/fsl_serdes.h> +#include <asm/fsl_portals.h> +#include <asm/fsl_liodn.h> +#include <fm_eth.h> + +#include "t104xrdb.h" + +DECLARE_GLOBAL_DATA_PTR; + +int checkboard(void) +{ + struct cpu_type *cpu = gd->arch.cpu; + + printf("Board: %sRDB\n", cpu->name); + return 0; +} + +int board_early_init_r(void) +{ +#ifdef CONFIG_SYS_FLASH_BASE + const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; + const u8 flash_esel = find_tlb_idx((void *)flashbase, 1); + + /* + * Remap Boot flash region to caching-inhibited + * so that flash can be erased properly. + */ + + /* Flush d-cache and invalidate i-cache of any FLASH data */ + flush_dcache(); + invalidate_icache(); + + /* invalidate existing TLB entry for flash */ + disable_tlb(flash_esel); + + set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, flash_esel, BOOKE_PAGESZ_256M, 1); +#endif + set_liodns(); +#ifdef CONFIG_SYS_DPAA_QBMAN + setup_portals(); +#endif + + return 0; +} + +int misc_init_r(void) +{ + return 0; +} + +void ft_board_setup(void *blob, bd_t *bd) +{ + phys_addr_t base; + phys_size_t size; + + ft_cpu_setup(blob, bd); + + base = getenv_bootm_low(); + size = getenv_bootm_size(); + + fdt_fixup_memory(blob, (u64)base, (u64)size); + +#ifdef CONFIG_PCI + pci_of_setup(blob, bd); +#endif + + fdt_fixup_liodn(blob); + +#ifdef CONFIG_HAS_FSL_DR_USB + fdt_fixup_dr_usb(blob, bd); +#endif + +#ifdef CONFIG_SYS_DPAA_FMAN + fdt_fixup_fman_ethernet(blob); +#endif +} diff --git a/board/freescale/t104xrdb/t104xrdb.h b/board/freescale/t104xrdb/t104xrdb.h new file mode 100644 index 0000000000..e7cc0c7b5e --- /dev/null +++ b/board/freescale/t104xrdb/t104xrdb.h @@ -0,0 +1,13 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __T104x_RDB_H__ +#define __T104x_RDB_H__ + +void fdt_fixup_board_enet(void *blob); +void pci_of_setup(void *blob, bd_t *bd); + +#endif diff --git a/board/freescale/t104xrdb/tlb.c b/board/freescale/t104xrdb/tlb.c new file mode 100644 index 0000000000..84f97a41e3 --- /dev/null +++ b/board/freescale/t104xrdb/tlb.c @@ -0,0 +1,107 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/mmu.h> + +struct fsl_e_tlb_entry tlb_table[] = { + /* TLB 0 - for temp stack in cache */ + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, + CONFIG_SYS_INIT_RAM_ADDR_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, + CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, + CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, + CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + + /* TLB 1 */ + /* *I*** - Covers boot page */ +#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L3_ADDR) + /* + * *I*G - L3SRAM. When L3 is used as 256K SRAM, the address of the + * SRAM is at 0xfffc0000, it covered the 0xfffff000. + */ + SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L3_ADDR, CONFIG_SYS_INIT_L3_ADDR, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 0, BOOKE_PAGESZ_256K, 1), +#else + SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 0, BOOKE_PAGESZ_4K, 1), +#endif + + /* *I*G* - CCSRBAR */ + SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 1, BOOKE_PAGESZ_16M, 1), + + /* *I*G* - Flash, localbus */ + /* This will be changed to *I*G* after relocation to RAM. */ + SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS, + MAS3_SX|MAS3_SR, MAS2_W|MAS2_G, + 0, 2, BOOKE_PAGESZ_256M, 1), + + /* *I*G* - PCI */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 3, BOOKE_PAGESZ_1G, 1), + + /* *I*G* - PCI I/O */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 4, BOOKE_PAGESZ_256K, 1), + + /* Bman/Qman */ +#ifdef CONFIG_SYS_BMAN_MEM_PHYS + SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE, CONFIG_SYS_BMAN_MEM_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 5, BOOKE_PAGESZ_16M, 1), + SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE + 0x01000000, + CONFIG_SYS_BMAN_MEM_PHYS + 0x01000000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 6, BOOKE_PAGESZ_16M, 1), +#endif +#ifdef CONFIG_SYS_QMAN_MEM_PHYS + SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE, CONFIG_SYS_QMAN_MEM_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 7, BOOKE_PAGESZ_16M, 1), + SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE + 0x01000000, + CONFIG_SYS_QMAN_MEM_PHYS + 0x01000000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 8, BOOKE_PAGESZ_16M, 1), +#endif +#ifdef CONFIG_SYS_DCSRBAR_PHYS + SET_TLB_ENTRY(1, CONFIG_SYS_DCSRBAR, CONFIG_SYS_DCSRBAR_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 9, BOOKE_PAGESZ_4M, 1), +#endif +#ifdef CONFIG_SYS_NAND_BASE + /* + * *I*G - NAND + * entry 14 and 15 has been used hard coded, they will be disabled + * in cpu_init_f, so we use entry 16 for nand. + */ + SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 10, BOOKE_PAGESZ_64K, 1), +#endif +#ifdef CONFIG_SYS_CPLD_BASE + SET_TLB_ENTRY(1, CONFIG_SYS_CPLD_BASE, CONFIG_SYS_CPLD_BASE_PHYS, + MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 11, BOOKE_PAGESZ_256K, 1), +#endif +}; + +int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/board/freescale/t2080qds/Makefile b/board/freescale/t2080qds/Makefile new file mode 100644 index 0000000000..0b8747b877 --- /dev/null +++ b/board/freescale/t2080qds/Makefile @@ -0,0 +1,12 @@ +# +# Copyright 2013 Freescale Semiconductor, Inc. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-$(CONFIG_T2080QDS) += t2080qds.o +obj-$(CONFIG_T2080QDS) += eth_t2080qds.o +obj-$(CONFIG_PCI) += pci.o +obj-y += ddr.o +obj-y += law.o +obj-y += tlb.o diff --git a/board/freescale/t2080qds/ddr.c b/board/freescale/t2080qds/ddr.c new file mode 100644 index 0000000000..5db5d21622 --- /dev/null +++ b/board/freescale/t2080qds/ddr.c @@ -0,0 +1,127 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * Version 2 or later as published by the Free Software Foundation. + */ + +#include <common.h> +#include <i2c.h> +#include <hwconfig.h> +#include <asm/mmu.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> +#include <asm/fsl_law.h> +#include "ddr.h" + +DECLARE_GLOBAL_DATA_PTR; + +void fsl_ddr_board_options(memctl_options_t *popts, + dimm_params_t *pdimm, + unsigned int ctrl_num) +{ + const struct board_specific_parameters *pbsp, *pbsp_highest = NULL; + ulong ddr_freq; + + if (ctrl_num > 2) { + printf("Not supported controller number %d\n", ctrl_num); + return; + } + if (!pdimm->n_ranks) + return; + + /* + * we use identical timing for all slots. If needed, change the code + * to pbsp = rdimms[ctrl_num] or pbsp = udimms[ctrl_num]; + */ + if (popts->registered_dimm_en) + pbsp = rdimms[0]; + else + pbsp = udimms[0]; + + + /* Get clk_adjust, cpo, write_data_delay,2T, according to the board ddr + * freqency and n_banks specified in board_specific_parameters table. + */ + ddr_freq = get_ddr_freq(0) / 1000000; + while (pbsp->datarate_mhz_high) { + if (pbsp->n_ranks == pdimm->n_ranks && + (pdimm->rank_density >> 30) >= pbsp->rank_gb) { + if (ddr_freq <= pbsp->datarate_mhz_high) { + popts->cpo_override = pbsp->cpo; + popts->write_data_delay = + pbsp->write_data_delay; + popts->clk_adjust = pbsp->clk_adjust; + popts->wrlvl_start = pbsp->wrlvl_start; + popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2; + popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3; + popts->twot_en = pbsp->force_2t; + goto found; + } + pbsp_highest = pbsp; + } + pbsp++; + } + + if (pbsp_highest) { + printf("Error: board specific timing not found"); + printf("for data rate %lu MT/s\n", ddr_freq); + printf("Trying to use the highest speed (%u) parameters\n", + pbsp_highest->datarate_mhz_high); + popts->cpo_override = pbsp_highest->cpo; + popts->write_data_delay = pbsp_highest->write_data_delay; + popts->clk_adjust = pbsp_highest->clk_adjust; + popts->wrlvl_start = pbsp_highest->wrlvl_start; + popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2; + popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3; + popts->twot_en = pbsp_highest->force_2t; + } else { + panic("DIMM is not supported by this board"); + } +found: + debug("Found timing match: n_ranks %d, data rate %d, rank_gb %d\n" + "\tclk_adjust %d, wrlvl_start %d, wrlvl_ctrl_2 0x%x, " + "wrlvl_ctrl_3 0x%x\n", + pbsp->n_ranks, pbsp->datarate_mhz_high, pbsp->rank_gb, + pbsp->clk_adjust, pbsp->wrlvl_start, pbsp->wrlvl_ctl_2, + pbsp->wrlvl_ctl_3); + + /* + * Factors to consider for half-strength driver enable: + * - number of DIMMs installed + */ + popts->half_strength_driver_enable = 0; + /* + * Write leveling override + */ + popts->wrlvl_override = 1; + popts->wrlvl_sample = 0xf; + + /* + * Rtt and Rtt_WR override + */ + popts->rtt_override = 0; + + /* Enable ZQ calibration */ + popts->zq_en = 1; + + /* DHC_EN =1, ODT = 75 Ohm */ + popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_75ohm); + popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_75ohm); +} + +phys_size_t initdram(int board_type) +{ + phys_size_t dram_size; + + puts("Initializing....using SPD\n"); + + dram_size = fsl_ddr_sdram(); + + dram_size = setup_ddr_tlbs(dram_size / 0x100000); + dram_size *= 0x100000; + + puts(" DDR: "); + return dram_size; +} diff --git a/board/freescale/t2080qds/ddr.h b/board/freescale/t2080qds/ddr.h new file mode 100644 index 0000000000..964eaada18 --- /dev/null +++ b/board/freescale/t2080qds/ddr.h @@ -0,0 +1,85 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __DDR_H__ +#define __DDR_H__ +struct board_specific_parameters { + u32 n_ranks; + u32 datarate_mhz_high; + u32 rank_gb; + u32 clk_adjust; + u32 wrlvl_start; + u32 wrlvl_ctl_2; + u32 wrlvl_ctl_3; + u32 cpo; + u32 write_data_delay; + u32 force_2t; +}; + +/* + * These tables contain all valid speeds we want to override with board + * specific parameters. datarate_mhz_high values need to be in ascending order + * for each n_ranks group. + */ + +static const struct board_specific_parameters udimm0[] = { + /* + * memory controller 0 + * num| hi| rank| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T + * ranks| mhz| GB |adjst| start | ctl2 | ctl3 | |delay | + */ + {2, 1350, 4, 4, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0}, + {2, 1350, 0, 5, 7, 0x0709090b, 0x0c0c0d09, 0xff, 2, 0}, + {2, 1666, 4, 4, 8, 0x080a0a0d, 0x0d10100b, 0xff, 2, 0}, + {2, 1666, 0, 5, 7, 0x080a0a0c, 0x0d0d0e0a, 0xff, 2, 0}, + {2, 1900, 0, 4, 8, 0x090a0b0e, 0x0f11120c, 0xff, 2, 0}, + {2, 2140, 0, 4, 8, 0x090a0b0e, 0x0f11120c, 0xff, 2, 0}, + {1, 1350, 0, 5, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0}, + {1, 1700, 0, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0}, + {1, 1800, 2, 5, 6, 0x06070709, 0x110a0b08, 0xff, 2, 0}, + {1, 1866, 2, 4, 6, 0x06060708, 0x09090a07, 0xff, 2, 0}, + {1, 1900, 2, 4, 6, 0x06060708, 0x09090a07, 0xff, 2, 0}, + {1, 2000, 2, 4, 8, 0x090a0b0d, 0x0e0f110b, 0xff, 2, 0}, + {1, 2133, 2, 4, 8, 0x090a0b0d, 0x0e0f110b, 0xff, 2, 0}, + {} +}; + +static const struct board_specific_parameters rdimm0[] = { + /* + * memory controller 0 + * num| hi| rank| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T + * ranks| mhz| GB |adjst| start | ctl2 | ctl3 | |delay | + */ + {4, 1350, 0, 5, 9, 0x08070605, 0x06070806, 0xff, 2, 0}, + {4, 1666, 0, 5, 11, 0x0a080706, 0x07090906, 0xff, 2, 0}, + {4, 2140, 0, 5, 12, 0x0b090807, 0x080a0b07, 0xff, 2, 0}, + {2, 1350, 0, 5, 9, 0x08070605, 0x06070806, 0xff, 2, 0}, + {2, 1666, 0, 5, 11, 0x0a090806, 0x08090a06, 0xff, 2, 0}, + {2, 2140, 0, 5, 12, 0x0b090807, 0x080a0b07, 0xff, 2, 0}, + {1, 1350, 0, 5, 9, 0x08070605, 0x06070806, 0xff, 2, 0}, + {1, 1666, 0, 5, 11, 0x0a090806, 0x08090a06, 0xff, 2, 0}, + {1, 2140, 0, 4, 12, 0x0b090807, 0x080a0b07, 0xff, 2, 0}, + {} +}; + +/* + * The three slots have slightly different timing. The center values are good + * for all slots. We use identical speed tables for them. In future use, if + * DIMMs require separated tables, make more entries as needed. + */ +static const struct board_specific_parameters *udimms[] = { + udimm0, +}; + +/* + * The three slots have slightly different timing. See comments above. + */ +static const struct board_specific_parameters *rdimms[] = { + rdimm0, +}; + + +#endif diff --git a/board/freescale/t2080qds/eth_t2080qds.c b/board/freescale/t2080qds/eth_t2080qds.c new file mode 100644 index 0000000000..3613f93981 --- /dev/null +++ b/board/freescale/t2080qds/eth_t2080qds.c @@ -0,0 +1,511 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * Shengzhou Liu <Shengzhou.Liu@freescale.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <command.h> +#include <netdev.h> +#include <asm/mmu.h> +#include <asm/processor.h> +#include <asm/immap_85xx.h> +#include <asm/fsl_law.h> +#include <asm/fsl_serdes.h> +#include <asm/fsl_portals.h> +#include <asm/fsl_liodn.h> +#include <malloc.h> +#include <fm_eth.h> +#include <fsl_mdio.h> +#include <miiphy.h> +#include <phy.h> +#include <asm/fsl_dtsec.h> +#include <asm/fsl_serdes.h> +#include "../common/qixis.h" +#include "../common/fman.h" +#include "t2080qds_qixis.h" + +#define EMI_NONE 0xFFFFFFFF +#define EMI1_RGMII1 0 +#define EMI1_RGMII2 1 +#define EMI1_SLOT1 2 +#define EMI1_SLOT2 6 +#define EMI1_SLOT3 3 +#define EMI1_SLOT4 4 +#define EMI1_SLOT5 5 +#define EMI2 7 + +static int mdio_mux[NUM_FM_PORTS]; + +static const char * const mdio_names[] = { + "T2080QDS_MDIO_RGMII1", + "T2080QDS_MDIO_RGMII2", + "T2080QDS_MDIO_SLOT1", + "T2080QDS_MDIO_SLOT3", + "T2080QDS_MDIO_SLOT4", + "T2080QDS_MDIO_SLOT5", + "T2080QDS_MDIO_SLOT2", + "T2080QDS_MDIO_10GC", +}; + +/* Map SerDes1 8 lanes to default slot, will be initialized dynamically */ +static u8 lane_to_slot[] = {3, 3, 3, 3, 1, 1, 1, 1}; + +static const char *T2080qds_mdio_name_for_muxval(u8 muxval) +{ + return mdio_names[muxval]; +} + +struct mii_dev *mii_dev_for_muxval(u8 muxval) +{ + struct mii_dev *bus; + const char *name = T2080qds_mdio_name_for_muxval(muxval); + + if (!name) { + printf("No bus for muxval %x\n", muxval); + return NULL; + } + + bus = miiphy_get_dev_by_name(name); + + if (!bus) { + printf("No bus by name %s\n", name); + return NULL; + } + + return bus; +} + +struct T2080qds_mdio { + u8 muxval; + struct mii_dev *realbus; +}; + +static void T2080qds_mux_mdio(u8 muxval) +{ + u8 brdcfg4; + if (muxval < 7) { + brdcfg4 = QIXIS_READ(brdcfg[4]); + brdcfg4 &= ~BRDCFG4_EMISEL_MASK; + brdcfg4 |= (muxval << BRDCFG4_EMISEL_SHIFT); + QIXIS_WRITE(brdcfg[4], brdcfg4); + } +} + +static int T2080qds_mdio_read(struct mii_dev *bus, int addr, int devad, + int regnum) +{ + struct T2080qds_mdio *priv = bus->priv; + + T2080qds_mux_mdio(priv->muxval); + + return priv->realbus->read(priv->realbus, addr, devad, regnum); +} + +static int T2080qds_mdio_write(struct mii_dev *bus, int addr, int devad, + int regnum, u16 value) +{ + struct T2080qds_mdio *priv = bus->priv; + + T2080qds_mux_mdio(priv->muxval); + + return priv->realbus->write(priv->realbus, addr, devad, regnum, value); +} + +static int T2080qds_mdio_reset(struct mii_dev *bus) +{ + struct T2080qds_mdio *priv = bus->priv; + + return priv->realbus->reset(priv->realbus); +} + +static int T2080qds_mdio_init(char *realbusname, u8 muxval) +{ + struct T2080qds_mdio *pmdio; + struct mii_dev *bus = mdio_alloc(); + + if (!bus) { + printf("Failed to allocate T2080QDS MDIO bus\n"); + return -1; + } + + pmdio = malloc(sizeof(*pmdio)); + if (!pmdio) { + printf("Failed to allocate T2080QDS private data\n"); + free(bus); + return -1; + } + + bus->read = T2080qds_mdio_read; + bus->write = T2080qds_mdio_write; + bus->reset = T2080qds_mdio_reset; + sprintf(bus->name, T2080qds_mdio_name_for_muxval(muxval)); + + pmdio->realbus = miiphy_get_dev_by_name(realbusname); + + if (!pmdio->realbus) { + printf("No bus with name %s\n", realbusname); + free(bus); + free(pmdio); + return -1; + } + + pmdio->muxval = muxval; + bus->priv = pmdio; + + return mdio_register(bus); +} + +void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr, + enum fm_port port, int offset) +{ + int phy; + char alias[20]; + struct fixed_link f_link; + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 srds_s1 = in_be32(&gur->rcwsr[4]) & + FSL_CORENET2_RCWSR4_SRDS1_PRTCL; + + srds_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT; + + if (fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_SGMII) { + phy = fm_info_get_phy_address(port); + switch (port) { + case FM1_DTSEC1: + case FM1_DTSEC2: + case FM1_DTSEC9: + case FM1_DTSEC10: + sprintf(alias, "phy_sgmii_s3_%x", phy); + fdt_set_phy_handle(fdt, compat, addr, alias); + fdt_status_okay_by_alias(fdt, "emi1_slot3"); + break; + case FM1_DTSEC5: + case FM1_DTSEC6: + if (mdio_mux[port] == EMI1_SLOT1) { + sprintf(alias, "phy_sgmii_s1_%x", phy); + fdt_set_phy_handle(fdt, compat, addr, alias); + fdt_status_okay_by_alias(fdt, "emi1_slot1"); + } else if (mdio_mux[port] == EMI1_SLOT2) { + sprintf(alias, "phy_sgmii_s2_%x", phy); + fdt_set_phy_handle(fdt, compat, addr, alias); + fdt_status_okay_by_alias(fdt, "emi1_slot2"); + } + break; + default: + break; + } + + } else if (fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_XGMII) { + switch (srds_s1) { + case 0x66: /* XFI interface */ + case 0x6b: + case 0x6c: + case 0x6d: + case 0x71: + f_link.phy_id = port; + f_link.duplex = 1; + f_link.link_speed = 10000; + f_link.pause = 0; + f_link.asym_pause = 0; + /* no PHY for XFI */ + fdt_delprop(fdt, offset, "phy-handle"); + fdt_setprop(fdt, offset, "fixed-link", &f_link, + sizeof(f_link)); + break; + default: + break; + } + } +} + +void fdt_fixup_board_enet(void *fdt) +{ + return; +} + +/* + * This function reads RCW to check if Serdes1{E,F,G,H} is configured + * as slot 1/2/3 and update the lane_to_slot[] array accordingly + */ +static void initialize_lane_to_slot(void) +{ + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 srds_s1 = in_be32(&gur->rcwsr[4]) & + FSL_CORENET2_RCWSR4_SRDS1_PRTCL; + + srds_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT; + + switch (srds_s1) { + case 0x51: + case 0x5f: + case 0x65: + case 0x6b: + case 0x71: + lane_to_slot[5] = 2; + lane_to_slot[6] = 2; + lane_to_slot[7] = 2; + break; + case 0xa6: + case 0x8e: + case 0x8f: + case 0x82: + case 0x83: + case 0xd3: + case 0xd9: + case 0xcb: + lane_to_slot[6] = 2; + lane_to_slot[7] = 2; + break; + case 0xda: + lane_to_slot[4] = 3; + lane_to_slot[5] = 3; + lane_to_slot[6] = 3; + lane_to_slot[7] = 3; + break; + default: + break; + } +} + +int board_eth_init(bd_t *bis) +{ +#if defined(CONFIG_FMAN_ENET) + int i, idx, lane, slot, interface; + struct memac_mdio_info dtsec_mdio_info; + struct memac_mdio_info tgec_mdio_info; + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 rcwsr13 = in_be32(&gur->rcwsr[13]); + u32 srds_s1; + + srds_s1 = in_be32(&gur->rcwsr[4]) & + FSL_CORENET2_RCWSR4_SRDS1_PRTCL; + srds_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT; + + initialize_lane_to_slot(); + + /* Initialize the mdio_mux array so we can recognize empty elements */ + for (i = 0; i < NUM_FM_PORTS; i++) + mdio_mux[i] = EMI_NONE; + + dtsec_mdio_info.regs = + (struct memac_mdio_controller *)CONFIG_SYS_FM1_DTSEC_MDIO_ADDR; + + dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME; + + /* Register the 1G MDIO bus */ + fm_memac_mdio_init(bis, &dtsec_mdio_info); + + tgec_mdio_info.regs = + (struct memac_mdio_controller *)CONFIG_SYS_FM1_TGEC_MDIO_ADDR; + tgec_mdio_info.name = DEFAULT_FM_TGEC_MDIO_NAME; + + /* Register the 10G MDIO bus */ + fm_memac_mdio_init(bis, &tgec_mdio_info); + + /* Register the muxing front-ends to the MDIO buses */ + T2080qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_RGMII1); + T2080qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_RGMII2); + T2080qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT1); + T2080qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT2); + T2080qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT3); + T2080qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT4); + T2080qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT5); + T2080qds_mdio_init(DEFAULT_FM_TGEC_MDIO_NAME, EMI2); + + /* Set the two on-board RGMII PHY address */ + fm_info_set_phy_address(FM1_DTSEC3, RGMII_PHY1_ADDR); + if ((rcwsr13 & FSL_CORENET_RCWSR13_EC2) == + FSL_CORENET_RCWSR13_EC2_DTSEC4_RGMII) + fm_info_set_phy_address(FM1_DTSEC4, RGMII_PHY2_ADDR); + else + fm_info_set_phy_address(FM1_DTSEC10, RGMII_PHY2_ADDR); + + switch (srds_s1) { + case 0x1c: + case 0x95: + case 0xa2: + case 0x94: + /* SGMII in Slot3 */ + fm_info_set_phy_address(FM1_DTSEC9, SGMII_CARD_PORT1_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC10, SGMII_CARD_PORT2_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT3_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT4_PHY_ADDR); + /* SGMII in Slot2 */ + fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT3_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT4_PHY_ADDR); + break; + case 0x51: + case 0x5f: + case 0x65: + /* XAUI/HiGig in Slot3 */ + fm_info_set_phy_address(FM1_10GEC1, FM1_10GEC1_PHY_ADDR); + /* SGMII in Slot2 */ + fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT3_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT4_PHY_ADDR); + break; + case 0x66: + /* + * XFI does not need a PHY to work, but to avoid U-boot use + * default PHY address which is zero to a MAC when it found + * a MAC has no PHY address, we give a PHY address to XFI + * MAC, and should not use a real XAUI PHY address, since + * MDIO can access it successfully, and then MDIO thinks + * the XAUI card is used for the XFI MAC, which will cause + * error. + */ + fm_info_set_phy_address(FM1_10GEC1, 4); + fm_info_set_phy_address(FM1_10GEC2, 5); + fm_info_set_phy_address(FM1_10GEC3, 6); + fm_info_set_phy_address(FM1_10GEC4, 7); + break; + case 0x6b: + fm_info_set_phy_address(FM1_10GEC1, 4); + fm_info_set_phy_address(FM1_10GEC2, 5); + fm_info_set_phy_address(FM1_10GEC3, 6); + fm_info_set_phy_address(FM1_10GEC4, 7); + /* SGMII in Slot2 */ + fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT3_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR); + break; + case 0x6c: + case 0x6d: + /* SGMII in Slot3 */ + fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT3_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT2_PHY_ADDR); + break; + case 0x71: + /* SGMII in Slot3 */ + fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT3_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT4_PHY_ADDR); + /* SGMII in Slot2 */ + fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT3_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR); + break; + case 0xa6: + case 0x8e: + case 0x8f: + case 0x82: + case 0x83: + /* SGMII in Slot3 */ + fm_info_set_phy_address(FM1_DTSEC9, SGMII_CARD_PORT1_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC10, SGMII_CARD_PORT2_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT3_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT4_PHY_ADDR); + /* SGMII in Slot2 */ + fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT3_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR); + break; + case 0xa4: + case 0x96: + case 0x8a: + /* SGMII in Slot3 */ + fm_info_set_phy_address(FM1_DTSEC9, SGMII_CARD_PORT1_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC10, SGMII_CARD_PORT2_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT3_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT4_PHY_ADDR); + break; + case 0xd9: + case 0xd3: + case 0xcb: + /* SGMII in Slot3 */ + fm_info_set_phy_address(FM1_DTSEC10, SGMII_CARD_PORT2_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT3_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT4_PHY_ADDR); + /* SGMII in Slot2 */ + fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT3_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR); + break; + default: + puts("Invalid SerDes1 protocol for T2080QDS\n"); + break; + } + + for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) { + idx = i - FM1_DTSEC1; + interface = fm_info_get_enet_if(i); + switch (interface) { + case PHY_INTERFACE_MODE_SGMII: + lane = serdes_get_first_lane(FSL_SRDS_1, + SGMII_FM1_DTSEC1 + idx); + if (lane < 0) + break; + slot = lane_to_slot[lane]; + debug("FM1@DTSEC%u expects SGMII in slot %u\n", + idx + 1, slot); + if (QIXIS_READ(present2) & (1 << (slot - 1))) + fm_disable_port(i); + + switch (slot) { + case 1: + mdio_mux[i] = EMI1_SLOT1; + fm_info_set_mdio(i, mii_dev_for_muxval( + mdio_mux[i])); + break; + case 2: + mdio_mux[i] = EMI1_SLOT2; + fm_info_set_mdio(i, mii_dev_for_muxval( + mdio_mux[i])); + break; + }; + break; + case PHY_INTERFACE_MODE_RGMII: + if (i == FM1_DTSEC3) + mdio_mux[i] = EMI1_RGMII1; + else if (i == FM1_DTSEC4 || FM1_DTSEC10) + mdio_mux[i] = EMI1_RGMII2; + fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i])); + break; + default: + break; + } + } + + for (i = FM1_10GEC1; i < FM1_10GEC1 + CONFIG_SYS_NUM_FM1_10GEC; i++) { + idx = i - FM1_10GEC1; + switch (fm_info_get_enet_if(i)) { + case PHY_INTERFACE_MODE_XGMII: + if (srds_s1 == 0x51) { + lane = serdes_get_first_lane(FSL_SRDS_1, + XAUI_FM1_MAC9 + idx); + } else if ((srds_s1 == 0x5f) || (srds_s1 == 0x65)) { + lane = serdes_get_first_lane(FSL_SRDS_1, + HIGIG_FM1_MAC9 + idx); + } else { + if (i == FM1_10GEC1 || i == FM1_10GEC2) + lane = serdes_get_first_lane(FSL_SRDS_1, + XFI_FM1_MAC9 + idx); + else + lane = serdes_get_first_lane(FSL_SRDS_1, + XFI_FM1_MAC1 + idx); + } + + if (lane < 0) + break; + mdio_mux[i] = EMI2; + fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i])); + + if ((srds_s1 == 0x66) || (srds_s1 == 0x6b) || + (srds_s1 == 0x6c) || (srds_s1 == 0x6d) || + (srds_s1 == 0x71)) { + /* As XFI is in cage intead of a slot, so + * ensure doesn't disable the corresponding port + */ + break; + } + + slot = lane_to_slot[lane]; + if (QIXIS_READ(present2) & (1 << (slot - 1))) + fm_disable_port(i); + break; + default: + break; + } + } + + cpu_eth_init(bis); +#endif /* CONFIG_FMAN_ENET */ + + return pci_eth_init(bis); +} diff --git a/board/freescale/t2080qds/law.c b/board/freescale/t2080qds/law.c new file mode 100644 index 0000000000..74e2a53a8f --- /dev/null +++ b/board/freescale/t2080qds/law.c @@ -0,0 +1,34 @@ +/* + * Copyright 2008-2012 Freescale Semiconductor, Inc. + * + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/fsl_law.h> +#include <asm/mmu.h> + +struct law_entry law_table[] = { + SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_IFC), +#ifdef CONFIG_SYS_BMAN_MEM_PHYS + SET_LAW(CONFIG_SYS_BMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_BMAN), +#endif +#ifdef CONFIG_SYS_QMAN_MEM_PHYS + SET_LAW(CONFIG_SYS_QMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_QMAN), +#endif +#ifdef QIXIS_BASE_PHYS + SET_LAW(QIXIS_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_IFC), +#endif +#ifdef CONFIG_SYS_DCSRBAR_PHYS + /* Limit DCSR to 32M to access NPC Trace Buffer */ + SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_DCSR), +#endif +#ifdef CONFIG_SYS_NAND_BASE_PHYS + SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_IFC), +#endif +}; + +int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/freescale/t2080qds/pci.c b/board/freescale/t2080qds/pci.c new file mode 100644 index 0000000000..84a89dad4f --- /dev/null +++ b/board/freescale/t2080qds/pci.c @@ -0,0 +1,23 @@ +/* + * Copyright 2007-2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <command.h> +#include <pci.h> +#include <asm/fsl_pci.h> +#include <libfdt.h> +#include <fdt_support.h> +#include <asm/fsl_serdes.h> + +void pci_init_board(void) +{ + fsl_pcie_init_board(0); +} + +void pci_of_setup(void *blob, bd_t *bd) +{ + FT_FSL_PCI_SETUP; +} diff --git a/board/freescale/t2080qds/t2080_pbi.cfg b/board/freescale/t2080qds/t2080_pbi.cfg new file mode 100644 index 0000000000..e200d926fb --- /dev/null +++ b/board/freescale/t2080qds/t2080_pbi.cfg @@ -0,0 +1,41 @@ +# +# Copyright 2013 Freescale Semiconductor, Inc. +# +# SPDX-License-Identifier: GPL-2.0+ +# +# Refer doc/README.pblimage for more details about how-to configure +# and create PBL boot image +# + +#PBI commands +#Initialize CPC1 +09010000 00200400 +09138000 00000000 +091380c0 00000100 +#512KB SRAM +09010100 00000000 +09010104 fff80009 +09010f00 08000000 +#enable CPC1 +09010000 80000000 +#Configure LAW for CPC1 +09000d00 00000000 +09000d04 fff80000 +09000d08 81000012 +#Initialize eSPI controller, default configuration is slow for eSPI to +#load data, this configuration comes from u-boot eSPI driver. +09110000 80000403 +09110020 2d170008 +09110024 00100008 +09110028 00100008 +0911002c 00100008 +#Errata for slowing down the MDC clock to make it <= 2.5 MHZ +094fc030 00008148 +094fd030 00008148 +#Configure alternate space +09000010 00000000 +09000014 ff000000 +09000018 81000000 +#Flush PBL data +09138000 00000000 +091380c0 00000000 diff --git a/board/freescale/t2080qds/t2080_rcw.cfg b/board/freescale/t2080qds/t2080_rcw.cfg new file mode 100644 index 0000000000..c2ad0fda55 --- /dev/null +++ b/board/freescale/t2080qds/t2080_rcw.cfg @@ -0,0 +1,8 @@ +#PBL preamble and RCW header +aa55aa55 010e0100 +#SerDes Protocol: 0x66_0x16 +#Core/DDR: 1533Mhz/2133MT/s +12100017 15000000 00000000 00000000 +66160002 00008400 e8104000 c1000000 +00000000 00000000 00000000 000307fc +00000000 00000000 00000000 00000004 diff --git a/board/freescale/t2080qds/t2080qds.c b/board/freescale/t2080qds/t2080qds.c new file mode 100644 index 0000000000..cac32fe73c --- /dev/null +++ b/board/freescale/t2080qds/t2080qds.c @@ -0,0 +1,324 @@ +/* + * Copyright 2009-2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <command.h> +#include <i2c.h> +#include <netdev.h> +#include <linux/compiler.h> +#include <asm/mmu.h> +#include <asm/processor.h> +#include <asm/immap_85xx.h> +#include <asm/fsl_law.h> +#include <asm/fsl_serdes.h> +#include <asm/fsl_portals.h> +#include <asm/fsl_liodn.h> +#include <fm_eth.h> + +#include "../common/qixis.h" +#include "../common/vsc3316_3308.h" +#include "t2080qds.h" +#include "t2080qds_qixis.h" + +DECLARE_GLOBAL_DATA_PTR; + +int checkboard(void) +{ + char buf[64]; + u8 sw; + struct cpu_type *cpu = gd->arch.cpu; + static const char *freq[4] = { + "100.00MHZ(from 8T49N222A)", "125.00MHz", + "156.25MHZ", "100.00MHz" + }; + + printf("Board: %sQDS, ", cpu->name); + sw = QIXIS_READ(arch); + printf("Sys ID: 0x%02x, Board Arch: V%d, ", QIXIS_READ(id), sw >> 4); + printf("Board Version: %c, boot from ", (sw & 0xf) + 'A' - 1); + + sw = QIXIS_READ(brdcfg[0]); + sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT; + + if (sw < 0x8) + printf("vBank%d\n", sw); + else if (sw == 0x8) + puts("Promjet\n"); + else if (sw == 0x9) + puts("NAND\n"); + else + printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH); + + printf("FPGA: v%d (%s), build %d", (int)QIXIS_READ(scver), + qixis_read_tag(buf), (int)qixis_read_minor()); + /* the timestamp string contains "\n" at the end */ + printf(" on %s", qixis_read_time(buf)); + + puts("SERDES Reference Clocks:\n"); + sw = QIXIS_READ(brdcfg[2]); + printf("SD1_CLK1=%s, SD1_CLK2=%s\n", freq[sw >> 6], + freq[(sw >> 4) & 0x3]); + printf("SD2_CLK1=%s, SD2_CLK2=%s\n", freq[(sw & 0xf) >> 2], + freq[sw & 0x3]); + + return 0; +} + +int select_i2c_ch_pca9547(u8 ch) +{ + int ret; + + ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1); + if (ret) { + puts("PCA: failed to select proper channel\n"); + return ret; + } + + return 0; +} + +int brd_mux_lane_to_slot(void) +{ + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 srds_prtcl_s1, srds_prtcl_s2; + + srds_prtcl_s1 = in_be32(&gur->rcwsr[4]) & + FSL_CORENET2_RCWSR4_SRDS1_PRTCL; + srds_prtcl_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT; + srds_prtcl_s2 = in_be32(&gur->rcwsr[4]) & + FSL_CORENET2_RCWSR4_SRDS2_PRTCL; + srds_prtcl_s2 >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT; + + switch (srds_prtcl_s1) { + case 0: + /* SerDes1 is not enabled */ + break; + case 0x1c: + case 0x95: + case 0xa2: + case 0x94: + /* SD1(A:D) => SLOT3 SGMII + * SD1(G:H) => SLOT1 SGMII + */ + QIXIS_WRITE(brdcfg[12], 0x58); + break; + case 0x51: + /* SD1(A:D) => SLOT3 XAUI + * SD1(E) => SLOT1 PCIe4 + * SD1(F:H) => SLOT2 SGMII + */ + QIXIS_WRITE(brdcfg[12], 0x15); + break; + case 0x66: + case 0x67: + /* SD1(A:D) => XFI cage + * SD1(E:H) => SLOT1 PCIe4 + */ + QIXIS_WRITE(brdcfg[12], 0xfe); + break; + case 0x6b: + /* SD1(A:D) => XFI cage + * SD1(E) => SLOT1 PCIe4 + * SD1(F:H) => SLOT2 SGMII + */ + QIXIS_WRITE(brdcfg[12], 0xf1); + break; + case 0x6c: + case 0x6d: + /* SD1(A:B) => XFI cage + * SD1(C:D) => SLOT3 SGMII + * SD1(E:H) => SLOT1 PCIe4 + */ + QIXIS_WRITE(brdcfg[12], 0xda); + break; + default: + printf("WARNING: unsupported for SerDes1 Protocol %d\n", + srds_prtcl_s1); + return -1; + } + + switch (srds_prtcl_s2) { + case 0: + /* SerDes2 is not enabled */ + break; + case 0x01: + case 0x02: + /* SD2(A:H) => SLOT4 PCIe1 */ + QIXIS_WRITE(brdcfg[13], 0x20); + break; + case 0x15: + case 0x16: + /* + * SD2(A:D) => SLOT4 PCIe1 + * SD2(E:F) => SLOT5 PCIe2 + * SD2(G:H) => SATA1,SATA2 + */ + QIXIS_WRITE(brdcfg[13], 0xb0); + break; + case 0x18: + /* + * SD2(A:D) => SLOT4 PCIe1 + * SD2(E:F) => SLOT5 Aurora + * SD2(G:H) => SATA1,SATA2 + */ + QIXIS_WRITE(brdcfg[13], 0x70); + break; + case 0x1f: + /* + * SD2(A:D) => SLOT4 PCIe1 + * SD2(E:H) => SLOT5 PCIe2 + */ + QIXIS_WRITE(brdcfg[13], 0xa0); + break; + case 0x29: + case 0x2d: + case 0x2e: + /* + * SD2(A:D) => SLOT4 SRIO2 + * SD2(E:H) => SLOT5 SRIO1 + */ + QIXIS_WRITE(brdcfg[13], 0x50); + break; + default: + printf("WARNING: unsupported for SerDes2 Protocol %d\n", + srds_prtcl_s2); + return -1; + } + return 0; +} + +int board_early_init_r(void) +{ + const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; + const u8 flash_esel = find_tlb_idx((void *)flashbase, 1); + + /* + * Remap Boot flash + PROMJET region to caching-inhibited + * so that flash can be erased properly. + */ + + /* Flush d-cache and invalidate i-cache of any FLASH data */ + flush_dcache(); + invalidate_icache(); + + /* invalidate existing TLB entry for flash + promjet */ + disable_tlb(flash_esel); + + set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, flash_esel, BOOKE_PAGESZ_256M, 1); + + set_liodns(); +#ifdef CONFIG_SYS_DPAA_QBMAN + setup_portals(); +#endif + + /* Disable remote I2C connection to qixis fpga */ + QIXIS_WRITE(brdcfg[5], QIXIS_READ(brdcfg[5]) & ~BRDCFG5_IRE); + + brd_mux_lane_to_slot(); + select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT); + + return 0; +} + +unsigned long get_board_sys_clk(void) +{ + u8 sysclk_conf = QIXIS_READ(brdcfg[1]); +#ifdef CONFIG_FSL_QIXIS_CLOCK_MEASUREMENT + /* use accurate clock measurement */ + int freq = QIXIS_READ(clk_freq[0]) << 8 | QIXIS_READ(clk_freq[1]); + int base = QIXIS_READ(clk_base[0]) << 8 | QIXIS_READ(clk_base[1]); + u32 val; + + val = freq * base; + if (val) { + debug("SYS Clock measurement is: %d\n", val); + return val; + } else { + printf("Warning: SYS clock measurement is invalid, "); + printf("using value from brdcfg1.\n"); + } +#endif + + switch (sysclk_conf & 0x0F) { + case QIXIS_SYSCLK_83: + return 83333333; + case QIXIS_SYSCLK_100: + return 100000000; + case QIXIS_SYSCLK_125: + return 125000000; + case QIXIS_SYSCLK_133: + return 133333333; + case QIXIS_SYSCLK_150: + return 150000000; + case QIXIS_SYSCLK_160: + return 160000000; + case QIXIS_SYSCLK_166: + return 166666666; + } + return 66666666; +} + +unsigned long get_board_ddr_clk(void) +{ + u8 ddrclk_conf = QIXIS_READ(brdcfg[1]); +#ifdef CONFIG_FSL_QIXIS_CLOCK_MEASUREMENT + /* use accurate clock measurement */ + int freq = QIXIS_READ(clk_freq[2]) << 8 | QIXIS_READ(clk_freq[3]); + int base = QIXIS_READ(clk_base[0]) << 8 | QIXIS_READ(clk_base[1]); + u32 val; + + val = freq * base; + if (val) { + debug("DDR Clock measurement is: %d\n", val); + return val; + } else { + printf("Warning: DDR clock measurement is invalid, "); + printf("using value from brdcfg1.\n"); + } +#endif + + switch ((ddrclk_conf & 0x30) >> 4) { + case QIXIS_DDRCLK_100: + return 100000000; + case QIXIS_DDRCLK_125: + return 125000000; + case QIXIS_DDRCLK_133: + return 133333333; + } + return 66666666; +} + +int misc_init_r(void) +{ + return 0; +} + +void ft_board_setup(void *blob, bd_t *bd) +{ + phys_addr_t base; + phys_size_t size; + + ft_cpu_setup(blob, bd); + + base = getenv_bootm_low(); + size = getenv_bootm_size(); + + fdt_fixup_memory(blob, (u64)base, (u64)size); + +#ifdef CONFIG_PCI + pci_of_setup(blob, bd); +#endif + + fdt_fixup_liodn(blob); + fdt_fixup_dr_usb(blob, bd); + +#ifdef CONFIG_SYS_DPAA_FMAN + fdt_fixup_fman_ethernet(blob); + fdt_fixup_board_enet(blob); +#endif +} diff --git a/board/freescale/t2080qds/t2080qds.h b/board/freescale/t2080qds/t2080qds.h new file mode 100644 index 0000000000..39fcef28c3 --- /dev/null +++ b/board/freescale/t2080qds/t2080qds.h @@ -0,0 +1,13 @@ +/* + * Copyright 2011-2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CORENET_DS_H__ +#define __CORENET_DS_H__ + +void fdt_fixup_board_enet(void *blob); +void pci_of_setup(void *blob, bd_t *bd); + +#endif diff --git a/board/freescale/t2080qds/t2080qds_qixis.h b/board/freescale/t2080qds/t2080qds_qixis.h new file mode 100644 index 0000000000..fc83da707f --- /dev/null +++ b/board/freescale/t2080qds/t2080qds_qixis.h @@ -0,0 +1,47 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __T2080QDS_QIXIS_H__ +#define __T2080QDS_QIXIS_H__ + +/* Definitions of QIXIS Registers for T2080QDS */ + +#define QIXIS_SRDS1CLK_122 0x5a +#define QIXIS_SRDS1CLK_125 0x5e + + +/* BRDCFG4[4:7]] select EC1 and EC2 as a pair */ +#define BRDCFG4_EMISEL_MASK 0xE0 +#define BRDCFG4_EMISEL_SHIFT 5 + +/* SYSCLK */ +#define QIXIS_SYSCLK_66 0x0 +#define QIXIS_SYSCLK_83 0x1 +#define QIXIS_SYSCLK_100 0x2 +#define QIXIS_SYSCLK_125 0x3 +#define QIXIS_SYSCLK_133 0x4 +#define QIXIS_SYSCLK_150 0x5 +#define QIXIS_SYSCLK_160 0x6 +#define QIXIS_SYSCLK_166 0x7 + +/* DDRCLK */ +#define QIXIS_DDRCLK_66 0x0 +#define QIXIS_DDRCLK_100 0x1 +#define QIXIS_DDRCLK_125 0x2 +#define QIXIS_DDRCLK_133 0x3 + +#define BRDCFG5_IRE 0x20 /* i2c Remote i2c1 enable */ + +#define BRDCFG12_SD3EN_MASK 0x20 +#define BRDCFG12_SD3MX_MASK 0x08 +#define BRDCFG12_SD3MX_SLOT5 0x08 +#define BRDCFG12_SD3MX_SLOT6 0x00 +#define BRDCFG12_SD4EN_MASK 0x04 +#define BRDCFG12_SD4MX_MASK 0x03 +#define BRDCFG12_SD4MX_SLOT7 0x02 +#define BRDCFG12_SD4MX_SLOT8 0x01 +#define BRDCFG12_SD4MX_AURO_SATA 0x00 +#endif diff --git a/board/freescale/t2080qds/tlb.c b/board/freescale/t2080qds/tlb.c new file mode 100644 index 0000000000..62cd11033a --- /dev/null +++ b/board/freescale/t2080qds/tlb.c @@ -0,0 +1,146 @@ +/* + * Copyright 2008-2013 Freescale Semiconductor, Inc. + * + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/mmu.h> + +struct fsl_e_tlb_entry tlb_table[] = { + /* TLB 0 - for temp stack in cache */ + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, + CONFIG_SYS_INIT_RAM_ADDR_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, + CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, + CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, + CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + + /* TLB 1 */ + /* *I*** - Covers boot page */ +#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L3_ADDR) + /* + * *I*G - L3SRAM. When L3 is used as 1M SRAM, the address of the + * SRAM is at 0xfff00000, it covered the 0xfffff000. + */ + SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L3_ADDR, CONFIG_SYS_INIT_L3_ADDR, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 0, BOOKE_PAGESZ_1M, 1), +#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) + /* + * SRIO_PCIE_BOOT-SLAVE. When slave boot, the address of the + * space is at 0xfff00000, it covered the 0xfffff000. + */ + SET_TLB_ENTRY(1, CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR, + CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_W|MAS2_G, + 0, 0, BOOKE_PAGESZ_1M, 1), +#else + SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 0, BOOKE_PAGESZ_4K, 1), +#endif + + /* *I*G* - CCSRBAR */ + SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 1, BOOKE_PAGESZ_16M, 1), + + /* *I*G* - Flash, localbus */ + /* This will be changed to *I*G* after relocation to RAM. */ + SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS, + MAS3_SX|MAS3_SR, MAS2_W|MAS2_G, + 0, 2, BOOKE_PAGESZ_256M, 1), + + /* *I*G* - PCIe 1, 0x80000000 */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 3, BOOKE_PAGESZ_512M, 1), + + /* *I*G* - PCIe 2, 0xa0000000 */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE2_MEM_VIRT, CONFIG_SYS_PCIE2_MEM_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 4, BOOKE_PAGESZ_256M, 1), + + /* *I*G* - PCIe 3, 0xb0000000 */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_VIRT, CONFIG_SYS_PCIE3_MEM_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 5, BOOKE_PAGESZ_256M, 1), + + + /* *I*G* - PCIe 4, 0xc0000000 */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE4_MEM_VIRT, CONFIG_SYS_PCIE4_MEM_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 6, BOOKE_PAGESZ_256M, 1), + + /* *I*G* - PCI I/O */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 7, BOOKE_PAGESZ_256K, 1), + + /* Bman/Qman */ +#ifdef CONFIG_SYS_BMAN_MEM_PHYS + SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE, CONFIG_SYS_BMAN_MEM_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 9, BOOKE_PAGESZ_16M, 1), + SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE + 0x01000000, + CONFIG_SYS_BMAN_MEM_PHYS + 0x01000000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 10, BOOKE_PAGESZ_16M, 1), +#endif +#ifdef CONFIG_SYS_QMAN_MEM_PHYS + SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE, CONFIG_SYS_QMAN_MEM_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 11, BOOKE_PAGESZ_16M, 1), + SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE + 0x01000000, + CONFIG_SYS_QMAN_MEM_PHYS + 0x01000000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 12, BOOKE_PAGESZ_16M, 1), +#endif +#ifdef CONFIG_SYS_DCSRBAR_PHYS + SET_TLB_ENTRY(1, CONFIG_SYS_DCSRBAR, CONFIG_SYS_DCSRBAR_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 13, BOOKE_PAGESZ_32M, 1), +#endif +#ifdef CONFIG_SYS_NAND_BASE + /* + * *I*G - NAND + * entry 14 and 15 has been used hard coded, they will be disabled + * in cpu_init_f, so we use entry 16 for nand. + */ + SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 16, BOOKE_PAGESZ_64K, 1), +#endif +#ifdef QIXIS_BASE_PHYS + SET_TLB_ENTRY(1, QIXIS_BASE, QIXIS_BASE_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 17, BOOKE_PAGESZ_4K, 1), +#endif +#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE + /* + * SRIO_PCIE_BOOT-SLAVE. 1M space from 0xffe00000 for + * fetching ucode and ENV from master + */ + SET_TLB_ENTRY(1, CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR, + CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_G, + 0, 18, BOOKE_PAGESZ_1M, 1), +#endif + +}; + +int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/board/freescale/t4qds/ddr.c b/board/freescale/t4qds/ddr.c index d70c31051d..7586cc3c4b 100644 --- a/board/freescale/t4qds/ddr.c +++ b/board/freescale/t4qds/ddr.c @@ -10,8 +10,8 @@ #include <i2c.h> #include <hwconfig.h> #include <asm/mmu.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> #include <asm/fsl_law.h> #include "ddr.h" diff --git a/board/freescale/t4qds/eth.c b/board/freescale/t4qds/eth.c index b5f488bcba..24cf907430 100644 --- a/board/freescale/t4qds/eth.c +++ b/board/freescale/t4qds/eth.c @@ -12,7 +12,7 @@ #include <asm/cache.h> #include <asm/immap_85xx.h> #include <asm/fsl_law.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <asm/fsl_serdes.h> #include <asm/fsl_portals.h> #include <asm/fsl_liodn.h> diff --git a/board/gaisler/gr_cpci_ax2000/config.mk b/board/gaisler/gr_cpci_ax2000/config.mk index e9c60286ce..309c879489 100644 --- a/board/gaisler/gr_cpci_ax2000/config.mk +++ b/board/gaisler/gr_cpci_ax2000/config.mk @@ -18,5 +18,4 @@ CONFIG_SYS_TEXT_BASE = 0x00000000 # U-BOOT IN SDRAM #CONFIG_SYS_TEXT_BASE = 0x60000000 -PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \ - -I$(TOPDIR)/board +PLATFORM_CPPFLAGS += -I$(TOPDIR)/board diff --git a/board/gaisler/gr_ep2s60/config.mk b/board/gaisler/gr_ep2s60/config.mk index 6c31a17f8c..d57efae158 100644 --- a/board/gaisler/gr_ep2s60/config.mk +++ b/board/gaisler/gr_ep2s60/config.mk @@ -16,5 +16,4 @@ CONFIG_SYS_TEXT_BASE = 0x00000000 # U-BOOT IN SDRAM #CONFIG_SYS_TEXT_BASE = 0x40000000 -PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \ - -I$(TOPDIR)/board +PLATFORM_CPPFLAGS += -I$(TOPDIR)/board diff --git a/board/gaisler/gr_xc3s_1500/config.mk b/board/gaisler/gr_xc3s_1500/config.mk index 3b59cca5e6..e87320be99 100644 --- a/board/gaisler/gr_xc3s_1500/config.mk +++ b/board/gaisler/gr_xc3s_1500/config.mk @@ -15,5 +15,4 @@ CONFIG_SYS_TEXT_BASE = 0x00000000 # U-BOOT IN RAM #CONFIG_SYS_TEXT_BASE = 0x40000000 -PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \ - -I$(TOPDIR)/board +PLATFORM_CPPFLAGS += -I$(TOPDIR)/board diff --git a/board/gaisler/grsim/config.mk b/board/gaisler/grsim/config.mk index d98ed54c07..df26f82c9c 100644 --- a/board/gaisler/grsim/config.mk +++ b/board/gaisler/grsim/config.mk @@ -15,5 +15,4 @@ CONFIG_SYS_TEXT_BASE = 0x00000000 # U-BOOT IN RAM #CONFIG_SYS_TEXT_BASE = 0x40000000 -PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \ - -I$(TOPDIR)/board +PLATFORM_CPPFLAGS += -I$(TOPDIR)/board diff --git a/board/gaisler/grsim_leon2/config.mk b/board/gaisler/grsim_leon2/config.mk index 59e4e31690..99f9a68725 100644 --- a/board/gaisler/grsim_leon2/config.mk +++ b/board/gaisler/grsim_leon2/config.mk @@ -15,5 +15,4 @@ CONFIG_SYS_TEXT_BASE = 0x00000000 # RUN U-BOOT FROM RAM #CONFIG_SYS_TEXT_BASE = 0x40000000 -PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \ - -I$(TOPDIR)/board +PLATFORM_CPPFLAGS += -I$(TOPDIR)/board diff --git a/board/gdsys/p1022/controlcenterd.c b/board/gdsys/p1022/controlcenterd.c index 81c22bc94c..8ccd9ce6ba 100644 --- a/board/gdsys/p1022/controlcenterd.c +++ b/board/gdsys/p1022/controlcenterd.c @@ -29,7 +29,7 @@ #include <asm/cache.h> #include <asm/immap_85xx.h> #include <asm/fsl_pci.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <asm/fsl_serdes.h> #include <asm/io.h> #include <libfdt.h> diff --git a/board/gdsys/p1022/ddr.c b/board/gdsys/p1022/ddr.c index 4a652de430..7596736bfd 100644 --- a/board/gdsys/p1022/ddr.c +++ b/board/gdsys/p1022/ddr.c @@ -12,8 +12,8 @@ #include <common.h> #include <i2c.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, unsigned int ctrl_num) diff --git a/board/genietv/u-boot.lds b/board/genietv/u-boot.lds index e217f06819..70ab702fd9 100644 --- a/board/genietv/u-boot.lds +++ b/board/genietv/u-boot.lds @@ -18,11 +18,11 @@ SECTIONS arch/powerpc/cpu/mpc8xx/start.o (.text*) arch/powerpc/cpu/mpc8xx/traps.o (.text*) - lib/libgeneric.o (.text*) - net/libnet.o (.text*) - arch/powerpc/cpu/mpc8xx/libmpc8xx.o (.text*) - board/genietv/libgenietv.o (.text*) - arch/powerpc/lib/libpowerpc.o (.text*) + lib/built-in.o (.text*) + net/built-in.o (.text*) + arch/powerpc/cpu/mpc8xx/built-in.o (.text*) + board/genietv/built-in.o (.text*) + arch/powerpc/lib/built-in.o (.text*) *(.text.do_load_serial*) *(.text.do_mem_*) *(.text.do_bootm*) diff --git a/board/h2200/Makefile b/board/h2200/Makefile index b654a96e0b..d4fa15344c 100644 --- a/board/h2200/Makefile +++ b/board/h2200/Makefile @@ -10,8 +10,5 @@ obj-y := h2200.o extra-y := h2200-header.bin -$(obj)h2200-header.o: h2200-header.S - $(CC) $(CFLAGS) -c -o $@ $< - $(obj)h2200-header.bin: $(obj)h2200-header.o $(OBJCOPY) -O binary $< $@ diff --git a/board/hermes/u-boot.lds b/board/hermes/u-boot.lds index 9419f83a70..0309860391 100644 --- a/board/hermes/u-boot.lds +++ b/board/hermes/u-boot.lds @@ -17,7 +17,7 @@ SECTIONS /* the sector layout of our flash chips! XXX FIXME XXX */ arch/powerpc/cpu/mpc8xx/start.o (.text*) arch/powerpc/cpu/mpc8xx/traps.o (.text*) - board/hermes/libhermes.o (.text*) + board/hermes/built-in.o (.text*) . = env_offset; common/env_embedded.o (.text*) diff --git a/board/qemu-malta/Makefile b/board/imgtec/malta/Makefile index 5d727f6f52..19dd3a3c3b 100644 --- a/board/qemu-malta/Makefile +++ b/board/imgtec/malta/Makefile @@ -5,5 +5,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-y = qemu-malta.o +obj-y = malta.o obj-y += lowlevel_init.o +obj-y += superio.o diff --git a/board/imgtec/malta/flash-malta-boot.tcl b/board/imgtec/malta/flash-malta-boot.tcl new file mode 100644 index 0000000000..0eedf07ace --- /dev/null +++ b/board/imgtec/malta/flash-malta-boot.tcl @@ -0,0 +1,40 @@ +# +# Copyright (C) 2013 Imagination Technologies +# +# Programs a MIPS Malta boot flash with a flat binary image. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +proc flash-boot { binfile } { + puts "flash monitor binary $binfile" + config Coherent on + config CoherencyDuringLoad on + + if {[endian]=="big"} { + puts "CPU in BE mode" + flash device sharp_16x32_be; + } else { + puts "CPU in LE mode" + flash device sharp_16x32; + } + + flash clear all; + flash set 0xBE000000..0xBE0FFFFF + flash erase sector 0xbe000000; + flash erase sector 0xbe020000; + flash erase sector 0xbe040000; + flash erase sector 0xbe060000; + flash erase sector 0xbe080000; + flash erase sector 0xbe0a0000; + flash erase sector 0xbe0c0000; + flash erase sector 0xbe0e0000; + puts "finished erasing boot flash"; + + puts "programming flash, please be patient" + load bin 0xbe000000 $binfile size4 + + flash clear all + config CoherencyDuringLoad off + puts "finished programming boot flash"; +} diff --git a/board/imgtec/malta/lowlevel_init.S b/board/imgtec/malta/lowlevel_init.S new file mode 100644 index 0000000000..ae09c27d07 --- /dev/null +++ b/board/imgtec/malta/lowlevel_init.S @@ -0,0 +1,238 @@ +/* + * Copyright (C) 2013 Gabor Juhos <juhosg@openwrt.org> + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <config.h> +#include <gt64120.h> +#include <msc01.h> +#include <pci.h> + +#include <asm/addrspace.h> +#include <asm/regdef.h> +#include <asm/malta.h> +#include <asm/mipsregs.h> + +#ifdef CONFIG_SYS_BIG_ENDIAN +#define CPU_TO_GT32(_x) ((_x)) +#else +#define CPU_TO_GT32(_x) ( \ + (((_x) & 0xff) << 24) | (((_x) & 0xff00) << 8) | \ + (((_x) & 0xff0000) >> 8) | (((_x) & 0xff000000) >> 24)) +#endif + + .text + .set noreorder + .set mips32 + + .globl lowlevel_init +lowlevel_init: + /* disable any L2 cache for now */ + sync + mfc0 t0, CP0_CONFIG, 2 + ori t0, t0, 0x1 << 12 + mtc0 t0, CP0_CONFIG, 2 + + /* detect the core card */ + li t0, KSEG1ADDR(MALTA_REVISION) + lw t0, 0(t0) + srl t0, t0, MALTA_REVISION_CORID_SHF + andi t0, t0, (MALTA_REVISION_CORID_MSK >> \ + MALTA_REVISION_CORID_SHF) + + /* core cards using the gt64120 system controller */ + li t1, MALTA_REVISION_CORID_CORE_LV + beq t0, t1, _gt64120 + + /* core cards using the MSC01 system controller */ + li t1, MALTA_REVISION_CORID_CORE_FPGA6 + beq t0, t1, _msc01 + nop + + /* unknown system controller */ + b . + nop + + /* + * Load BAR registers of GT64120 as done by YAMON + * + * based on a patch sent by Antony Pavlov <antonynpavlov@gmail.com> + * to the barebox mailing list. + * The subject of the original patch: + * 'MIPS: qemu-malta: add YAMON-style GT64120 memory map' + * URL: + * http://www.mail-archive.com/barebox@lists.infradead.org/msg06128.html + * + * based on write_bootloader() in qemu.git/hw/mips_malta.c + * see GT64120 manual and qemu.git/hw/gt64xxx.c for details + */ +_gt64120: + /* move GT64120 registers from 0x14000000 to 0x1be00000 */ + li t1, KSEG1ADDR(GT_DEF_BASE) + li t0, CPU_TO_GT32(0xdf000000) + sw t0, GT_ISD_OFS(t1) + + /* setup MEM-to-PCI0 mapping */ + li t1, KSEG1ADDR(MALTA_GT_BASE) + + /* setup PCI0 io window to 0x18000000-0x181fffff */ + li t0, CPU_TO_GT32(0xc0000000) + sw t0, GT_PCI0IOLD_OFS(t1) + li t0, CPU_TO_GT32(0x40000000) + sw t0, GT_PCI0IOHD_OFS(t1) + + /* setup PCI0 mem windows */ + li t0, CPU_TO_GT32(0x80000000) + sw t0, GT_PCI0M0LD_OFS(t1) + li t0, CPU_TO_GT32(0x3f000000) + sw t0, GT_PCI0M0HD_OFS(t1) + + li t0, CPU_TO_GT32(0xc1000000) + sw t0, GT_PCI0M1LD_OFS(t1) + li t0, CPU_TO_GT32(0x5e000000) + sw t0, GT_PCI0M1HD_OFS(t1) + + jr ra + nop + + /* + * + */ +_msc01: + /* setup peripheral bus controller clock divide */ + li t0, KSEG1ADDR(MALTA_MSC01_PBC_BASE) + li t1, 0x1 << MSC01_PBC_CLKCFG_SHF + sw t1, MSC01_PBC_CLKCFG_OFS(t0) + + /* tweak peripheral bus controller timings */ + li t1, (0x1 << MSC01_PBC_CS0TIM_CDT_SHF) | \ + (0x1 << MSC01_PBC_CS0TIM_CAT_SHF) + sw t1, MSC01_PBC_CS0TIM_OFS(t0) + li t1, (0x0 << MSC01_PBC_CS0RW_RDT_SHF) | \ + (0x2 << MSC01_PBC_CS0RW_RAT_SHF) | \ + (0x0 << MSC01_PBC_CS0RW_WDT_SHF) | \ + (0x2 << MSC01_PBC_CS0RW_WAT_SHF) + sw t1, MSC01_PBC_CS0RW_OFS(t0) + lw t1, MSC01_PBC_CS0CFG_OFS(t0) + li t2, MSC01_PBC_CS0CFG_DTYP_MSK + and t1, t2 + ori t1, (0x0 << MSC01_PBC_CS0CFG_ADM_SHF) | \ + (0x3 << MSC01_PBC_CS0CFG_WSIDLE_SHF) | \ + (0x10 << MSC01_PBC_CS0CFG_WS_SHF) + sw t1, MSC01_PBC_CS0CFG_OFS(t0) + + /* setup basic address decode */ + li t0, KSEG1ADDR(MALTA_MSC01_BIU_BASE) + li t1, 0x0 + li t2, -CONFIG_SYS_MEM_SIZE + sw t1, MSC01_BIU_MCBAS1L_OFS(t0) + sw t2, MSC01_BIU_MCMSK1L_OFS(t0) + sw t1, MSC01_BIU_MCBAS2L_OFS(t0) + sw t2, MSC01_BIU_MCMSK2L_OFS(t0) + + /* initialise IP1 - unused */ + li t1, MALTA_MSC01_IP1_BASE + li t2, -MALTA_MSC01_IP1_SIZE + sw t1, MSC01_BIU_IP1BAS1L_OFS(t0) + sw t2, MSC01_BIU_IP1MSK1L_OFS(t0) + sw t1, MSC01_BIU_IP1BAS2L_OFS(t0) + sw t2, MSC01_BIU_IP1MSK2L_OFS(t0) + + /* initialise IP2 - PCI */ + li t1, MALTA_MSC01_IP2_BASE1 + li t2, -MALTA_MSC01_IP2_SIZE1 + sw t1, MSC01_BIU_IP2BAS1L_OFS(t0) + sw t2, MSC01_BIU_IP2MSK1L_OFS(t0) + li t1, MALTA_MSC01_IP2_BASE2 + li t2, -MALTA_MSC01_IP2_SIZE2 + sw t1, MSC01_BIU_IP2BAS2L_OFS(t0) + sw t2, MSC01_BIU_IP2MSK2L_OFS(t0) + + /* initialise IP3 - peripheral bus controller */ + li t1, MALTA_MSC01_IP3_BASE + li t2, -MALTA_MSC01_IP3_SIZE + sw t1, MSC01_BIU_IP3BAS1L_OFS(t0) + sw t2, MSC01_BIU_IP3MSK1L_OFS(t0) + sw t1, MSC01_BIU_IP3BAS2L_OFS(t0) + sw t2, MSC01_BIU_IP3MSK2L_OFS(t0) + + /* setup PCI memory */ + li t0, KSEG1ADDR(MALTA_MSC01_PCI_BASE) + li t1, MALTA_MSC01_PCIMEM_BASE + li t2, (-MALTA_MSC01_PCIMEM_SIZE) & MSC01_PCI_SC2PMMSKL_MSK_MSK + li t3, MALTA_MSC01_PCIMEM_MAP + sw t1, MSC01_PCI_SC2PMBASL_OFS(t0) + sw t2, MSC01_PCI_SC2PMMSKL_OFS(t0) + sw t3, MSC01_PCI_SC2PMMAPL_OFS(t0) + + /* setup PCI I/O */ + li t1, MALTA_MSC01_PCIIO_BASE + li t2, (-MALTA_MSC01_PCIIO_SIZE) & MSC01_PCI_SC2PIOMSKL_MSK_MSK + li t3, MALTA_MSC01_PCIIO_MAP + sw t1, MSC01_PCI_SC2PIOBASL_OFS(t0) + sw t2, MSC01_PCI_SC2PIOMSKL_OFS(t0) + sw t3, MSC01_PCI_SC2PIOMAPL_OFS(t0) + + /* setup PCI_BAR0 memory window */ + li t1, -CONFIG_SYS_MEM_SIZE + sw t1, MSC01_PCI_BAR0_OFS(t0) + + /* setup PCI to SysCon/CPU translation */ + sw t1, MSC01_PCI_P2SCMSKL_OFS(t0) + sw zero, MSC01_PCI_P2SCMAPL_OFS(t0) + + /* setup PCI vendor & device IDs */ + li t1, (PCI_VENDOR_ID_MIPS << MSC01_PCI_HEAD0_VENDORID_SHF) | \ + (PCI_DEVICE_ID_MIPS_MSC01 << MSC01_PCI_HEAD0_DEVICEID_SHF) + sw t1, MSC01_PCI_HEAD0_OFS(t0) + + /* setup PCI subsystem vendor & device IDs */ + sw t1, MSC01_PCI_HEAD11_OFS(t0) + + /* setup PCI class, revision */ + li t1, (PCI_CLASS_BRIDGE_HOST << MSC01_PCI_HEAD2_CLASS_SHF) | \ + (0x1 << MSC01_PCI_HEAD2_REV_SHF) + sw t1, MSC01_PCI_HEAD2_OFS(t0) + + /* ensure a sane setup */ + sw zero, MSC01_PCI_HEAD3_OFS(t0) + sw zero, MSC01_PCI_HEAD4_OFS(t0) + sw zero, MSC01_PCI_HEAD5_OFS(t0) + sw zero, MSC01_PCI_HEAD6_OFS(t0) + sw zero, MSC01_PCI_HEAD7_OFS(t0) + sw zero, MSC01_PCI_HEAD8_OFS(t0) + sw zero, MSC01_PCI_HEAD9_OFS(t0) + sw zero, MSC01_PCI_HEAD10_OFS(t0) + sw zero, MSC01_PCI_HEAD12_OFS(t0) + sw zero, MSC01_PCI_HEAD13_OFS(t0) + sw zero, MSC01_PCI_HEAD14_OFS(t0) + sw zero, MSC01_PCI_HEAD15_OFS(t0) + + /* setup PCI command register */ + li t1, (PCI_COMMAND_FAST_BACK | \ + PCI_COMMAND_SERR | \ + PCI_COMMAND_PARITY | \ + PCI_COMMAND_MASTER | \ + PCI_COMMAND_MEMORY) + sw t1, MSC01_PCI_HEAD1_OFS(t0) + + /* setup PCI byte swapping */ +#ifdef CONFIG_SYS_BIG_ENDIAN + li t1, (0x1 << MSC01_PCI_SWAP_BAR0_BSWAP_SHF) | \ + (0x1 << MSC01_PCI_SWAP_IO_BSWAP_SHF) + sw t1, MSC01_PCI_SWAP_OFS(t0) +#else + sw zero, MSC01_PCI_SWAP_OFS(t0) +#endif + + /* enable PCI host configuration cycles */ + lw t1, MSC01_PCI_CFG_OFS(t0) + li t2, MSC01_PCI_CFG_RA_MSK | \ + MSC01_PCI_CFG_G_MSK | \ + MSC01_PCI_CFG_EN_MSK + or t1, t1, t2 + sw t1, MSC01_PCI_CFG_OFS(t0) + + jr ra + nop diff --git a/board/imgtec/malta/malta.c b/board/imgtec/malta/malta.c new file mode 100644 index 0000000000..d363e49919 --- /dev/null +++ b/board/imgtec/malta/malta.c @@ -0,0 +1,220 @@ +/* + * Copyright (C) 2013 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2013 Imagination Technologies + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <netdev.h> +#include <pci.h> +#include <pci_gt64120.h> +#include <pci_msc01.h> +#include <rtc.h> +#include <serial.h> + +#include <asm/addrspace.h> +#include <asm/io.h> +#include <asm/malta.h> + +#include "superio.h" + +enum core_card { + CORE_UNKNOWN, + CORE_LV, + CORE_FPGA6, +}; + +enum sys_con { + SYSCON_UNKNOWN, + SYSCON_GT64120, + SYSCON_MSC01, +}; + +static void malta_lcd_puts(const char *str) +{ + int i; + void *reg = (void *)CKSEG1ADDR(MALTA_ASCIIPOS0); + + /* print up to 8 characters of the string */ + for (i = 0; i < min(strlen(str), 8); i++) { + __raw_writel(str[i], reg); + reg += MALTA_ASCIIPOS1 - MALTA_ASCIIPOS0; + } + + /* fill the rest of the display with spaces */ + for (; i < 8; i++) { + __raw_writel(' ', reg); + reg += MALTA_ASCIIPOS1 - MALTA_ASCIIPOS0; + } +} + +static enum core_card malta_core_card(void) +{ + u32 corid, rev; + + rev = __raw_readl(CKSEG1ADDR(MALTA_REVISION)); + corid = (rev & MALTA_REVISION_CORID_MSK) >> MALTA_REVISION_CORID_SHF; + + switch (corid) { + case MALTA_REVISION_CORID_CORE_LV: + return CORE_LV; + + case MALTA_REVISION_CORID_CORE_FPGA6: + return CORE_FPGA6; + + default: + return CORE_UNKNOWN; + } +} + +static enum sys_con malta_sys_con(void) +{ + switch (malta_core_card()) { + case CORE_LV: + return SYSCON_GT64120; + + case CORE_FPGA6: + return SYSCON_MSC01; + + default: + return SYSCON_UNKNOWN; + } +} + +phys_size_t initdram(int board_type) +{ + return CONFIG_SYS_MEM_SIZE; +} + +int checkboard(void) +{ + enum core_card core; + + malta_lcd_puts("U-boot"); + puts("Board: MIPS Malta"); + + core = malta_core_card(); + switch (core) { + case CORE_LV: + puts(" CoreLV"); + break; + + case CORE_FPGA6: + puts(" CoreFPGA6"); + break; + + default: + puts(" CoreUnknown"); + } + + putc('\n'); + return 0; +} + +int board_eth_init(bd_t *bis) +{ + return pci_eth_init(bis); +} + +void _machine_restart(void) +{ + void __iomem *reset_base; + + reset_base = (void __iomem *)CKSEG1ADDR(MALTA_RESET_BASE); + __raw_writel(GORESET, reset_base); +} + +int board_early_init_f(void) +{ + void *io_base; + + /* choose correct PCI I/O base */ + switch (malta_sys_con()) { + case SYSCON_GT64120: + io_base = (void *)CKSEG1ADDR(MALTA_GT_PCIIO_BASE); + break; + + case SYSCON_MSC01: + io_base = (void *)CKSEG1ADDR(MALTA_MSC01_PCIIO_BASE); + break; + + default: + return -1; + } + + /* setup FDC37M817 super I/O controller */ + malta_superio_init(io_base); + + return 0; +} + +int misc_init_r(void) +{ + rtc_reset(); + + return 0; +} + +struct serial_device *default_serial_console(void) +{ + switch (malta_sys_con()) { + case SYSCON_GT64120: + return &eserial1_device; + + default: + case SYSCON_MSC01: + return &eserial2_device; + } +} + +void pci_init_board(void) +{ + pci_dev_t bdf; + u32 val32; + u8 val8; + + switch (malta_sys_con()) { + case SYSCON_GT64120: + set_io_port_base(CKSEG1ADDR(MALTA_GT_PCIIO_BASE)); + + gt64120_pci_init((void *)CKSEG1ADDR(MALTA_GT_BASE), + 0x00000000, 0x00000000, CONFIG_SYS_MEM_SIZE, + 0x10000000, 0x10000000, 128 * 1024 * 1024, + 0x00000000, 0x00000000, 0x20000); + break; + + default: + case SYSCON_MSC01: + set_io_port_base(CKSEG1ADDR(MALTA_MSC01_PCIIO_BASE)); + + msc01_pci_init((void *)CKSEG1ADDR(MALTA_MSC01_PCI_BASE), + 0x00000000, 0x00000000, CONFIG_SYS_MEM_SIZE, + MALTA_MSC01_PCIMEM_MAP, + CKSEG1ADDR(MALTA_MSC01_PCIMEM_BASE), + MALTA_MSC01_PCIMEM_SIZE, MALTA_MSC01_PCIIO_MAP, + 0x00000000, MALTA_MSC01_PCIIO_SIZE); + break; + } + + bdf = pci_find_device(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_82371AB_0, 0); + if (bdf == -1) + panic("Failed to find PIIX4 PCI bridge\n"); + + /* setup PCI interrupt routing */ + pci_write_config_byte(bdf, PCI_CFG_PIIX4_PIRQRCA, 10); + pci_write_config_byte(bdf, PCI_CFG_PIIX4_PIRQRCB, 10); + pci_write_config_byte(bdf, PCI_CFG_PIIX4_PIRQRCC, 11); + pci_write_config_byte(bdf, PCI_CFG_PIIX4_PIRQRCD, 11); + + /* mux SERIRQ onto SERIRQ pin */ + pci_read_config_dword(bdf, PCI_CFG_PIIX4_GENCFG, &val32); + val32 |= PCI_CFG_PIIX4_GENCFG_SERIRQ; + pci_write_config_dword(bdf, PCI_CFG_PIIX4_GENCFG, val32); + + /* enable SERIRQ - Linux currently depends upon this */ + pci_read_config_byte(bdf, PCI_CFG_PIIX4_SERIRQC, &val8); + val8 |= PCI_CFG_PIIX4_SERIRQC_EN | PCI_CFG_PIIX4_SERIRQC_CONT; + pci_write_config_byte(bdf, PCI_CFG_PIIX4_SERIRQC, val8); +} diff --git a/board/imgtec/malta/superio.c b/board/imgtec/malta/superio.c new file mode 100644 index 0000000000..eaa14df39e --- /dev/null +++ b/board/imgtec/malta/superio.c @@ -0,0 +1,63 @@ +/* + * Copyright (C) 2013 Imagination Technologies + * Author: Paul Burton <paul.burton@imgtec.com> + * + * Setup code for the FDC37M817 super I/O controller + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> + +#define SIO_CONF_PORT 0x3f0 +#define SIO_DATA_PORT 0x3f1 + +enum sio_conf_key { + SIOCONF_DEVNUM = 0x07, + SIOCONF_ACTIVATE = 0x30, + SIOCONF_ENTER_SETUP = 0x55, + SIOCONF_BASE_HIGH = 0x60, + SIOCONF_BASE_LOW = 0x61, + SIOCONF_PRIMARY_INT = 0x70, + SIOCONF_EXIT_SETUP = 0xaa, + SIOCONF_MODE = 0xf0, +}; + +static struct { + u8 key; + u8 data; +} sio_config[] = { + /* tty0 */ + { SIOCONF_DEVNUM, 0x04 }, + { SIOCONF_BASE_HIGH, 0x03 }, + { SIOCONF_BASE_LOW, 0xf8 }, + { SIOCONF_MODE, 0x02 }, + { SIOCONF_PRIMARY_INT, 0x04 }, + { SIOCONF_ACTIVATE, 0x01 }, + + /* tty1 */ + { SIOCONF_DEVNUM, 0x05 }, + { SIOCONF_BASE_HIGH, 0x02 }, + { SIOCONF_BASE_LOW, 0xf8 }, + { SIOCONF_MODE, 0x02 }, + { SIOCONF_PRIMARY_INT, 0x03 }, + { SIOCONF_ACTIVATE, 0x01 }, +}; + +void malta_superio_init(void *io_base) +{ + unsigned i; + + /* enter config state */ + writeb(SIOCONF_ENTER_SETUP, io_base + SIO_CONF_PORT); + + /* configure peripherals */ + for (i = 0; i < ARRAY_SIZE(sio_config); i++) { + writeb(sio_config[i].key, io_base + SIO_CONF_PORT); + writeb(sio_config[i].data, io_base + SIO_DATA_PORT); + } + + /* exit config state */ + writeb(SIOCONF_EXIT_SETUP, io_base + SIO_CONF_PORT); +} diff --git a/board/imgtec/malta/superio.h b/board/imgtec/malta/superio.h new file mode 100644 index 0000000000..1450da56dd --- /dev/null +++ b/board/imgtec/malta/superio.h @@ -0,0 +1,15 @@ +/* + * Copyright (C) 2013 Imagination Technologies + * Author: Paul Burton <paul.burton@imgtec.com> + * + * Setup code for the FDC37M817 super I/O controller + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __BOARD_MALTA_SUPERIO_H__ +#define __BOARD_MALTA_SUPERIO_H__ + +extern void malta_superio_init(void *io_base); + +#endif /* __BOARD_MALTA_SUPERIO_H__ */ diff --git a/board/keymile/km82xx/Makefile b/board/keymile/km82xx/Makefile index b44582fbea..20f193ab1d 100644 --- a/board/keymile/km82xx/Makefile +++ b/board/keymile/km82xx/Makefile @@ -5,7 +5,4 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common) -endif obj-y := km82xx.o ../common/common.o ../common/ivm.o diff --git a/board/keymile/km83xx/Makefile b/board/keymile/km83xx/Makefile index 7bdddf3bc3..6c3268853e 100644 --- a/board/keymile/km83xx/Makefile +++ b/board/keymile/km83xx/Makefile @@ -5,8 +5,4 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common) -endif - obj-y += km83xx.o ../common/common.o ../common/ivm.o km83xx_i2c.o diff --git a/board/keymile/km_arm/Makefile b/board/keymile/km_arm/Makefile index 32eaa9357f..a17d8d963a 100644 --- a/board/keymile/km_arm/Makefile +++ b/board/keymile/km_arm/Makefile @@ -6,10 +6,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common) -endif - obj-y := km_arm.o ../common/common.o ../common/ivm.o ifdef CONFIG_KM_FPGA_CONFIG diff --git a/board/keymile/kmp204x/Makefile b/board/keymile/kmp204x/Makefile index 64eb37c9d7..3e69ee2f15 100644 --- a/board/keymile/kmp204x/Makefile +++ b/board/keymile/kmp204x/Makefile @@ -8,9 +8,5 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common) -endif - -obj-y := $(BOARD).o ddr.o eth.o tlb.o pci.o law.o \ +obj-y := kmp204x.o ddr.o eth.o tlb.o pci.o law.o \ ../common/common.o ../common/ivm.o diff --git a/board/keymile/kmp204x/ddr.c b/board/keymile/kmp204x/ddr.c index bd425aab1a..34ac6979bd 100644 --- a/board/keymile/kmp204x/ddr.c +++ b/board/keymile/kmp204x/ddr.c @@ -11,8 +11,8 @@ #include <i2c.h> #include <hwconfig.h> #include <asm/mmu.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, diff --git a/board/kmc/kzm9g/kzm9g.c b/board/kmc/kzm9g/kzm9g.c index b669ffefec..ea36fa4e19 100644 --- a/board/kmc/kzm9g/kzm9g.c +++ b/board/kmc/kzm9g/kzm9g.c @@ -289,7 +289,6 @@ void adjust_core_voltage(void) { u8 data; - i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); data = 0x35; i2c_set_bus_num(0); i2c_write(0x40, 3, 1, &data, 1); diff --git a/board/kup/kup4k/Makefile b/board/kup/kup4k/Makefile index b3ad86ce18..c896fcd64d 100644 --- a/board/kup/kup4k/Makefile +++ b/board/kup/kup4k/Makefile @@ -5,8 +5,4 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common) -endif - obj-y = kup4k.o ../common/flash.o ../common/kup.o ../common/load_sernum_ethaddr.o ../common/pcmcia.o diff --git a/board/kup/kup4x/Makefile b/board/kup/kup4x/Makefile index 05a1afc3a9..6945943d09 100644 --- a/board/kup/kup4x/Makefile +++ b/board/kup/kup4x/Makefile @@ -5,8 +5,4 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common) -endif - obj-y = kup4x.o ../common/flash.o ../common/kup.o ../common/load_sernum_ethaddr.o ../common/pcmcia.o diff --git a/board/logicpd/am3517evm/am3517evm.c b/board/logicpd/am3517evm/am3517evm.c index b6c68da7a8..1569905460 100644 --- a/board/logicpd/am3517evm/am3517evm.c +++ b/board/logicpd/am3517evm/am3517evm.c @@ -98,8 +98,8 @@ static void am3517_evm_musb_init(void) */ int misc_init_r(void) { -#ifdef CONFIG_DRIVER_OMAP34XX_I2C - i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); +#ifdef CONFIG_SYS_I2C_OMAP34XX + i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE); #endif dieid_num_r(); diff --git a/board/matrix_vision/mvsmr/u-boot.lds b/board/matrix_vision/mvsmr/u-boot.lds index 08ce014aac..e885b7c160 100644 --- a/board/matrix_vision/mvsmr/u-boot.lds +++ b/board/matrix_vision/mvsmr/u-boot.lds @@ -18,7 +18,7 @@ SECTIONS /* the first two sectors (=8KB) of our S29GL flash chip */ arch/powerpc/cpu/mpc5xxx/start.o (.text*) arch/powerpc/cpu/mpc5xxx/traps.o (.text*) - board/matrix_vision/common/libmatrix_vision.o (.text*) + board/matrix_vision/common/built-in.o (.text*) /* This is only needed to force failure if size of above code will ever */ /* increase and grow into reserved space. */ diff --git a/board/mpl/mip405/Makefile b/board/mpl/mip405/Makefile index 509eb591b3..5bcf130501 100644 --- a/board/mpl/mip405/Makefile +++ b/board/mpl/mip405/Makefile @@ -5,10 +5,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common) -endif - obj-y = mip405.o cmd_mip405.o \ ../common/pci.o \ ../common/usb_uhci.o \ diff --git a/board/mpl/pati/Makefile b/board/mpl/pati/Makefile index 67381c108a..9822082612 100644 --- a/board/mpl/pati/Makefile +++ b/board/mpl/pati/Makefile @@ -5,9 +5,5 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common) -endif - obj-y := pati.o cmd_pati.o \ ../common/common_util.o diff --git a/board/mpl/pip405/Makefile b/board/mpl/pip405/Makefile index 3d73cc3f8d..0a3d059e9c 100644 --- a/board/mpl/pip405/Makefile +++ b/board/mpl/pip405/Makefile @@ -5,10 +5,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common) -endif - obj-y = pip405.o cmd_pip405.o \ ../common/pci.o \ ../common/isa.o \ diff --git a/board/mpl/vcma9/Makefile b/board/mpl/vcma9/Makefile index e0e96691c5..175a19fa36 100644 --- a/board/mpl/vcma9/Makefile +++ b/board/mpl/vcma9/Makefile @@ -5,10 +5,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common) -endif - obj-y := ../common/common_util.o obj-y += vcma9.o cmd_vcma9.o diff --git a/board/mvblue/u-boot.lds b/board/mvblue/u-boot.lds index 121354bfeb..5034a9675a 100644 --- a/board/mvblue/u-boot.lds +++ b/board/mvblue/u-boot.lds @@ -14,12 +14,12 @@ SECTIONS .text : { arch/powerpc/cpu/mpc824x/start.o (.text*) - lib/libgeneric.o (.text*) - net/libnet.o (.text*) - drivers/pci/libpci.o (.text*) - arch/powerpc/cpu/mpc824x/libmpc824x.o (.text*) - board/mvblue/libmvblue.o (.text*) - arch/powerpc/lib/libpowerpc.o (.text*) + lib/built-in.o (.text*) + net/built-in.o (.text*) + drivers/pci/built-in.o (.text*) + arch/powerpc/cpu/mpc824x/built-in.o (.text*) + board/mvblue/built-in.o (.text*) + arch/powerpc/lib/built-in.o (.text*) . = DEFINED(env_offset) ? env_offset : .; common/env_embedded.o (.ppcenv*) diff --git a/board/nvidia/beaver/Makefile b/board/nvidia/beaver/Makefile index f828f52c25..1f7c31d64b 100644 --- a/board/nvidia/beaver/Makefile +++ b/board/nvidia/beaver/Makefile @@ -14,6 +14,4 @@ # along with this program. If not, see <http://www.gnu.org/licenses/>. # -$(shell mkdir -p $(obj)../cardhu) - obj-y = ../cardhu/cardhu.o diff --git a/board/nvidia/ventana/Makefile b/board/nvidia/ventana/Makefile index 7265cfcccc..f67044f2cf 100644 --- a/board/nvidia/ventana/Makefile +++ b/board/nvidia/ventana/Makefile @@ -5,6 +5,4 @@ # SPDX-License-Identifier: GPL-2.0+ # -$(shell mkdir -p $(obj)../seaboard) - obj-y = ../seaboard/seaboard.o diff --git a/board/overo/overo.c b/board/overo/overo.c index aace42a8be..9ac35d2f4e 100644 --- a/board/overo/overo.c +++ b/board/overo/overo.c @@ -92,7 +92,7 @@ int get_board_revision(void) { int revision; -#ifdef CONFIG_DRIVER_OMAP34XX_I2C +#ifdef CONFIG_SYS_I2C_OMAP34XX unsigned char data; /* board revisions <= R2410 connect 4030 irq_1 to gpio112 */ diff --git a/board/phytec/pcm051/board.c b/board/phytec/pcm051/board.c index 6a27e56d11..68463e78db 100644 --- a/board/phytec/pcm051/board.c +++ b/board/phytec/pcm051/board.c @@ -130,7 +130,7 @@ void set_mux_conf_regs(void) { /* Initalize the board header */ enable_i2c0_pin_mux(); - i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); + i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE); enable_board_pin_mux(); } @@ -141,7 +141,7 @@ void set_mux_conf_regs(void) */ int board_init(void) { - i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); + i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE); gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; diff --git a/board/pn62/Makefile b/board/pn62/Makefile deleted file mode 100644 index 7572ed8610..0000000000 --- a/board/pn62/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = pn62.o cmd_pn62.o misc.o diff --git a/board/pn62/cmd_pn62.c b/board/pn62/cmd_pn62.c deleted file mode 100644 index a0326b40d6..0000000000 --- a/board/pn62/cmd_pn62.c +++ /dev/null @@ -1,146 +0,0 @@ -/* - * (C) Copyright 2002 - * Wolfgang Grandegger, DENX Software Engineering, wg@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <malloc.h> -#include <net.h> -#include <asm/io.h> -#include <pci.h> -#include <command.h> -#include "pn62.h" - -#if defined(CONFIG_CMD_BSP) - -/* - * Command led: controls the various LEDs 0..11 on the PN62 card. - */ -int do_led(cmd_tbl_t * cmdtp, int flag, int argc, char *const argv[]) -{ - unsigned int number, function; - - if (argc != 3) - return cmd_usage(cmdtp); - - number = simple_strtoul(argv[1], NULL, 10); - if (number > PN62_LED_MAX) - return 1; - - function = simple_strtoul(argv[2], NULL, 16); - set_led(number, function); - return 0; -} -U_BOOT_CMD( - led , 3, 1, do_led, - "set LED 0..11 on the PN62 board", - "i fun" - " - set 'i'th LED to function 'fun'" -); - -/* - * Command loadpci: loads a image over PCI. - */ -#define CMD_MOVE_WINDOW 0x1 -#define CMD_BOOT_IMAGE 0x2 - -int do_loadpci (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - char *s; - ulong addr = 0, count = 0; - u32 off; - int cmd, rcode = 0; - - /* pre-set load_addr */ - if ((s = getenv("loadaddr")) != NULL) { - addr = simple_strtoul(s, NULL, 16); - } - - switch (argc) { - case 1: - break; - case 2: - addr = simple_strtoul(argv[1], NULL, 16); - break; - default: - return cmd_usage(cmdtp); - } - - printf ("## Ready for image download ...\n"); - - show_startup_phase(12); - - while (1) { - /* Alive indicator */ - i2155x_write_scrapad(BOOT_PROTO, BOOT_PROTO_READY); - - /* Toggle status LEDs */ - cmd = (count / 200) % 4; /* downscale */ - set_led(4, cmd == 0 ? LED_1 : LED_0); - set_led(5, cmd == 1 ? LED_1 : LED_0); - set_led(6, cmd == 2 ? LED_1 : LED_0); - set_led(7, cmd == 3 ? LED_1 : LED_0); - udelay(1000); - count++; - - cmd = i2155x_read_scrapad(BOOT_CMD); - - if (cmd == BOOT_CMD_MOVE) { - off = i2155x_read_scrapad(BOOT_DATA); - off += addr; - i2155x_set_bar_base(3, off); - printf ("## BAR3 Addr moved = 0x%08x\n", off); - i2155x_write_scrapad(BOOT_CMD, ~cmd); - show_startup_phase(13); - } - else if (cmd == BOOT_CMD_BOOT) { - set_led(4, LED_1); - set_led(5, LED_1); - set_led(6, LED_1); - set_led(7, LED_1); - - i2155x_write_scrapad(BOOT_CMD, ~cmd); - show_startup_phase(14); - break; - } - - /* Abort if ctrl-c was pressed */ - if (ctrlc()) { - printf("\nAbort\n"); - return 0; - } - - } - - /* Repoint to the default shared memory */ - i2155x_set_bar_base(3, PN62_SMEM_DEFAULT); - - load_addr = addr; - printf ("## Start Addr = 0x%08lx\n", addr); - - show_startup_phase(15); - - /* Loading ok, check if we should attempt an auto-start */ - if (((s = getenv("autostart")) != NULL) && (strcmp(s,"yes") == 0)) { - char *local_args[2]; - local_args[0] = argv[0]; - local_args[1] = NULL; - - printf ("Automatic boot of image at addr 0x%08lX ...\n", - load_addr); - rcode = do_bootm (cmdtp, 0, 1, local_args); - } - - return rcode; -} - -U_BOOT_CMD( - loadpci, 2, 1, do_loadpci, - "load binary file over PCI", - "[addr]\n" - " - load binary file over PCI to address 'addr'" -); - -#endif diff --git a/board/pn62/misc.c b/board/pn62/misc.c deleted file mode 100644 index 98e0dfa518..0000000000 --- a/board/pn62/misc.c +++ /dev/null @@ -1,219 +0,0 @@ -/* - * (C) Copyright 2002 Wolfgang Grandegger <wg@denx.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <mpc824x.h> -#include <asm/io.h> -#include <pci.h> - -#include "pn62.h" - -typedef struct { - pci_dev_t devno; - volatile u32 *csr; - -} i2155x_t; - -static i2155x_t i2155x = { 0, NULL }; - -static struct pci_device_id i2155x_ids[] = { - { 0x1011, 0x0046 }, /* i21554 */ - { 0x8086, 0xb555 } /* i21555 */ -}; - -int i2155x_init(void) -{ - pci_dev_t devno; - u32 val; - int i; - - /* - * Find the Intel bridge. - */ - if ((devno = pci_find_devices(i2155x_ids, 0)) < 0) { - printf("Error: Intel bridge 2155x not found!\n"); - return -1; - } - i2155x.devno = devno; - - /* - * Get auto-configured base address for CSR access. - */ - pci_read_config_dword(devno, PCI_BASE_ADDRESS_1, &val); - if (val & PCI_BASE_ADDRESS_SPACE_IO) { - val &= PCI_BASE_ADDRESS_IO_MASK; - i2155x.csr = (volatile u32 *)(_IO_BASE + val); - } else { - val &= PCI_BASE_ADDRESS_MEM_MASK; - i2155x.csr = (volatile u32 *)val; - } - - /* - * Translate downstream memory 2 (bar3) to base of shared memory. - */ - i2155x_set_bar_base(3, PN62_SMEM_DEFAULT); - - /* - * Enable memory space, I/O space and bus master bits - * in both Primary and Secondary command registers. - */ - val = PCI_COMMAND_MEMORY|PCI_COMMAND_MASTER|PCI_COMMAND_IO; - pci_write_config_word(devno, 0x44, val); - pci_write_config_word(devno, 0x04, val); - - /* - * Clear scratchpad registers. - */ - for (i = 0; i < (I2155X_SCRAPAD_MAX - 1); i++) { - i2155x_write_scrapad(i, 0x0); - } - - /* - * Set interrupt line for Linux. - */ - pci_write_config_byte(devno, PCI_INTERRUPT_LINE, 3); - - return 0; -} - -/* - * Access the Scratchpad registers 0..7 of the Intel bridge. - */ -void i2155x_write_scrapad(int idx, u32 val) -{ - if (idx >= 0 && idx < I2155X_SCRAPAD_MAX) - out_le32(i2155x.csr + (I2155X_SCRAPAD_ADDR/4) + idx, val); - else - printf("i2155x_write_scrapad: invalid index\n"); -} - -u32 i2155x_read_scrapad(int idx) -{ - if (idx >= 0 && idx < I2155X_SCRAPAD_MAX) - return in_le32(i2155x.csr + (I2155X_SCRAPAD_ADDR/4) + idx); - else - printf("i2155x_read_scrapad: invalid index\n"); - return -1; -} - -void i2155x_set_bar_base(int bar, u32 base) -{ - if (bar >= 2 && bar <= 4) { - pci_write_config_dword(i2155x.devno, - I2155X_BAR2_BASE + (bar - 2) * 4, - base); - } -} - -/* - * Read Vital Product Data (VPD) from the Serial EPROM attached - * to the Intel bridge. - */ -int i2155x_read_vpd(int offset, int size, unsigned char *data) -{ - int i, n; - u16 val16; - - for (i = 0; i < size; i++) { - pci_write_config_word(i2155x.devno, I2155X_VPD_ADDR, - offset + i - I2155X_VPD_START); - for (n = 10000; n > 0; n--) { - pci_read_config_word(i2155x.devno, I2155X_VPD_ADDR, &val16); - if ((val16 & 0x8000) != 0) /* wait for completion */ - break; - udelay(100); - } - if (n == 0) { - printf("i2155x_read_vpd: TIMEOUT\n"); - return -1; - } - - pci_read_config_byte(i2155x.devno, I2155X_VPD_DATA, &data[i]); - } - - return i; -} - -static struct pci_device_id am79c95x_ids [] = { - { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_LANCE }, - { } -}; - - -/* - * Initialize the AMD ethernet controllers. - */ -int am79c95x_init(void) -{ - pci_dev_t devno; - int i; - - /* - * Set interrupt line for Linux. - */ - for (i = 0; i < 2; i++) { - if ((devno = pci_find_devices(am79c95x_ids, i)) < 0) - break; - pci_write_config_byte(devno, PCI_INTERRUPT_LINE, 2+i); - } - if (i < 2) - printf("Error: Only %d AMD Ethernet Controller found!\n", i); - - return 0; -} - - -void set_led(unsigned int number, unsigned int function) -{ - volatile u8 *addr; - - if ((number >= 0) && (number < PN62_LED_MAX) && - (function >= 0) && (function <= LED_LAST_FUNCTION)) { - addr = (volatile u8 *)(PN62_LED_BASE + number * 8); - out_8(addr, function&0xff); - } -} - -/* - * Show fatal error indicated by Kinght Rider(tm) effect - * in LEDS 0-7. LEDS 8-11 contain 4 bit error code. - * Note: this function will not terminate. - */ -void fatal_error(unsigned int error_code) -{ - int i, d; - - for (i = 0; i < 12; i++) { - set_led(i, LED_0); - } - - /* - * Write error code. - */ - set_led(8, (error_code & 0x01) ? LED_1 : LED_0); - set_led(9, (error_code & 0x02) ? LED_1 : LED_0); - set_led(10, (error_code & 0x04) ? LED_1 : LED_0); - set_led(11, (error_code & 0x08) ? LED_1 : LED_0); - - /* - * Yay - Knight Rider effect! - */ - while(1) { - unsigned int delay = 2000; - - for (i = 0; i < 8; i++) { - set_led(i, LED_1); - for (d = 0; d < delay; d++); - set_led(i, LED_0); - } - - for (i = 7; i > 0; i--) { - set_led(i, LED_1); - for (d = 0; d < delay; d++); - set_led(i, LED_0); - } - } -} diff --git a/board/pn62/pn62.c b/board/pn62/pn62.c deleted file mode 100644 index 81829dd75f..0000000000 --- a/board/pn62/pn62.c +++ /dev/null @@ -1,171 +0,0 @@ -/* - * (C) Copyright 2002 Wolfgang Grandegger <wg@denx.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <mpc824x.h> -#include <net.h> -#include <pci.h> -#include <netdev.h> - -#include "pn62.h" - -DECLARE_GLOBAL_DATA_PTR; - -static int get_serial_number (char *string, int size); -static void get_mac_address(int id, u8 *mac); - -#ifdef CONFIG_SHOW_BOOT_PROGRESS -void show_boot_progress (int phase) -{ - /* - * Show phases of the bootm command on the front panel - * LEDs and the scratchpad register #3 as well. We use - * blinking LEDs for logical "1". - */ - if (phase > 0) { - set_led (8, (phase & 0x1) ? LED_SLOW_CLOCK : LED_0); - set_led (9, (phase & 0x2) ? LED_SLOW_CLOCK : LED_0); - set_led (10, (phase & 0x4) ? LED_SLOW_CLOCK : LED_0); - set_led (11, (phase & 0x8) ? LED_SLOW_CLOCK : LED_0); - } - i2155x_write_scrapad (BOOT_STATUS, phase); - if (phase < 0) - i2155x_write_scrapad (BOOT_DONE, BOOT_DONE_ERROR); -} -#endif - -void show_startup_phase (int phase) -{ - /* - * Show the phase of U-Boot startup on the front panel - * LEDs and the scratchpad register #3 as well. - */ - if (phase > 0) { - set_led (8, (phase & 0x1) ? LED_1 : LED_0); - set_led (9, (phase & 0x2) ? LED_1 : LED_0); - set_led (10, (phase & 0x4) ? LED_1 : LED_0); - set_led (11, (phase & 0x8) ? LED_1 : LED_0); - } - i2155x_write_scrapad (BOOT_STATUS, phase); - if (phase < 0) - i2155x_write_scrapad (BOOT_DONE, BOOT_DONE_ERROR); -} - -int checkboard (void) -{ - show_startup_phase (1); - puts ("Board: PN62\n"); - return 0; -} - -phys_size_t initdram (int board_type) -{ - long size; - long new_bank0_end; - long mear1; - long emear1; - - show_startup_phase (2); - - size = get_ram_size(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MAX_RAM_SIZE); - - new_bank0_end = size - 1; - mear1 = mpc824x_mpc107_getreg (MEAR1); - emear1 = mpc824x_mpc107_getreg (EMEAR1); - mear1 = (mear1 & 0xFFFFFF00) | - ((new_bank0_end & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT); - emear1 = (emear1 & 0xFFFFFF00) | - ((new_bank0_end & MICR_ADDR_MASK) >> MICR_EADDR_SHIFT); - mpc824x_mpc107_setreg (MEAR1, mear1); - mpc824x_mpc107_setreg (EMEAR1, emear1); - - return (size); -} - -/* - * Initialize PCI Devices. We rely on auto-configuration. - */ -#ifndef CONFIG_PCI_PNP -#error "CONFIG_PCI_PNP is not defined, please correct!" -#endif - -struct pci_controller hose = { -}; - -void pci_init_board (void) -{ - show_startup_phase (4); - pci_mpc824x_init (&hose); - - show_startup_phase (5); - i2155x_init (); - show_startup_phase (6); - am79c95x_init (); - show_startup_phase (7); -} - -int misc_init_r (void) -{ - char str[20]; - u8 mac[6]; - - show_startup_phase (8); - /* - * Get serial number and ethernet addresses if not already defined - * and update the board info structure and the environment. - */ - if (getenv ("serial#") == NULL && - get_serial_number (str, strlen (str)) > 0) { - setenv ("serial#", str); - } - show_startup_phase (9); - - if (!eth_getenv_enetaddr("ethaddr", mac)) { - get_mac_address(0, mac); - eth_setenv_enetaddr("ethaddr", mac); - } - show_startup_phase (10); - -#ifdef CONFIG_HAS_ETH1 - if (!eth_getenv_enetaddr("eth1addr", mac)) { - get_mac_address(1, mac); - eth_setenv_enetaddr("eth1addr", mac); - } -#endif /* CONFIG_HAS_ETH1 */ - show_startup_phase (11); - - /* Tell everybody that U-Boot is up and runnig */ - i2155x_write_scrapad (0, 0x12345678); - return (0); -} - -static int get_serial_number (char *string, int size) -{ - int i; - char c; - - if (size < I2155X_VPD_SN_SIZE) - size = I2155X_VPD_SN_SIZE; - for (i = 0; i < (size - 1); i++) { - i2155x_read_vpd (I2155X_VPD_SN_START + i, 1, (uchar *)&c); - if (c == '\0') - break; - string[i] = c; - } - string[i] = '\0'; /* make sure it's terminated */ - - return i; -} - -static void get_mac_address(int id, u8 *mac) -{ - i2155x_read_vpd (I2155X_VPD_MAC0_START + 6 * id, 6, mac); -} - -int board_eth_init(bd_t *bis) -{ - return pci_eth_init(bis); -} diff --git a/board/pn62/pn62.h b/board/pn62/pn62.h deleted file mode 100644 index 10290c3142..0000000000 --- a/board/pn62/pn62.h +++ /dev/null @@ -1,145 +0,0 @@ -/* - * (C) Copyright 2002 Wolfgang Grandegger <wg@denx.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _PN62_H_ -#define _PN62_H_ - -/* - * Definitions for the Intel Bridge 21554 or 21555. - */ -#define I2155X_VPD_ADDR 0xe6 -#define I2155X_VPD_DATA 0xe8 - -#define I2155X_VPD_START 0x80 -#define I2155X_VPD_SN_START 0x80 -#define I2155X_VPD_SN_SIZE 0x10 -#define I2155X_VPD_MAC0_START 0x90 -#define I2155X_VPD_MAC1_START 0x96 - -#define I2155X_SCRAPAD_ADDR 0xa8 -#define I2155X_SCRAPAD_MAX 8 - -#define I2155X_BAR2_BASE 0x98 -#define I2155X_BAR3_BASE 0x9c -#define I2155X_BAR4_BASE 0xa0 - -#define I2155X_BAR2_SETUP 0xb0 -#define I2155X_BAR3_SETUP 0xb4 -#define I2155X_BAR4_SETUP 0xb8 - -/* - * Interrupt request numbers - */ -#define PN62_IRQ_HOST 0x0 -#define PN62_IRQ_PLX9054 0x1 -#define PN62_IRQ_ETH0 0x2 -#define PN62_IRQ_ETH1 0x3 -#define PN62_IRQ_COM1 0x4 -#define PN62_IRQ_COM2 0x4 - -/* - * Miscellaneous definitons. - */ -#define PN62_SMEM_DEFAULT 0x1f00000 - -/* - * Definitions for boot protocol using Scratchpad registers. - */ -#define BOOT_DONE 0 -#define BOOT_DONE_CLEAR 0x00dead00 -#define BOOT_DONE_ERROR 0xbad0dead -#define BOOT_DONE_U_BOOT 0x12345678 -#define BOOT_DONE_LINUX 0x87654321 -#define BOOT_CMD 1 -#define BOOT_CMD_MOVE 0x1 -#define BOOT_CMD_BOOT 0x2 -#define BOOT_DATA 2 -#define BOOT_PROTO 3 -#define BOOT_PROTO_READY 0x23456789 -#define BOOT_PROTO_CLEAR 0x00000000 -#define BOOT_STATUS 4 - -/* - * LED Definitions: - */ -#define PN62_LED_BASE 0xff800300 -#define PN62_LED_MAX 12 - -/* - * LED0 - 7 mounted on top of board, D1 - D8 - * LED8 - 11 upper four LEDs on the front panel of the board. - */ -#define LED_0 0x00 /* OFF */ -#define LED_1 0x01 /* ON */ -#define LED_SLOW_CLOCK 0x02 /* SLOW 1Hz ish */ -#define LED_nSLOW_CLOCK 0x03 /* inverse of above */ -#define LED_WATCHDOG_OUT 0x06 /* Reset Watchdog level */ -#define LED_WATCHDOG_CLOCK 0x07 /* clock to watchdog */ - -/* - * LED's currently setup in AMD79C973 device as the following: - * LED0 100Mbit - * LED1 LNKSE - * LED2 TX Activity - * LED3 RX Activity - */ -#define LED_E0_LED0 0x08 /* Ethernet Port 0 LED 0 */ -#define LED_E0_LED1 0x09 /* Ethernet Port 0 LED 1 */ -#define LED_E0_LED2 0x0A /* Ethernet Port 0 LED 2 */ -#define LED_E0_LED3 0x0B /* Ethernet Port 0 LED 3 */ -#define LED_E1_LED0 0x0C /* Ethernet Port 1 LED 0 */ -#define LED_E1_LED1 0x0D /* Ethernet Port 1 LED 1 */ -#define LED_E1_LED2 0x0E /* Ethernet Port 1 LED 2 */ -#define LED_E1_LED3 0x0F /* Ethernet Port 1 LED 3 */ -#define LED_STROBE0 0x10 /* Processor Strobe 0 */ -#define LED_STROBE1 0x11 /* Processor Strobe 1 */ -#define LED_STROBE2 0x12 /* Processor Strobe 2 */ -#define LED_STROBE3 0x13 /* Processor Strobe 3 */ -#define LED_STROBE4 0x14 /* Processor Strobe 4 */ -#define LED_STROBE5 0x15 /* Processor Strobe 5 */ -#define LED_STROBE6 0x16 /* Processor Strobe 6 */ -#define LED_STROBE7 0x17 /* Processor Strobe 7 */ -#define LED_HOST_STROBE0 0x18 /* Host strobe 0 */ -#define LED_HOST_STROBE1 0x19 /* Host strobe 1 */ -#define LED_HOST_STROBE2 0x1A /* Host strobe 2 */ -#define LED_HOST_STROBE3 0x1B /* Host strobe 3 */ -#define LED_HOST_STROBE4 0x1C /* Host strobe 4 */ -#define LED_HOST_STROBE5 0x1D /* Host strobe 5 */ -#define LED_HOST_STROBE6 0x1E /* Host strobe 6 */ -#define LED_HOST_STROBE7 0x1F /* Host strobe 7 */ -#define LED_MPC_INT0 0x20 /* MPC8240 INT 0 */ -#define LED_MPC_INT1 0x21 /* MPC8240 INT 1 */ -#define LED_MPC_INT2 0x22 /* MPC8240 INT 2 */ -#define LED_MPC_INT3 0x23 /* MPC8240 INT 3 */ -#define LED_MPC_INT4 0x24 /* MPC8240 INT 4 */ -#define LED_UART0_CS 0x25 /* UART 0 Chip Select */ -#define LED_UART1_CS 0x26 /* UART 1 Chip Select */ -#define LED_SRAM_CS 0x27 /* SRAM Chip Select */ -#define LED_SRAM_WR 0x28 /* SRAM WR Signal */ -#define LED_SRAM_RD 0x29 /* SRAM RD Signal */ -#define LED_MPC_RCS0 0x2A /* MPC8240 RCS0 Signal */ -#define LED_S_PCI_FRAME 0x2B /* Secondary PCI Frame Signal */ -#define LED_MPC_CS0 0x2C /* MPC8240 CS0 Signal */ -#define LED_HOST_INT 0x2D /* MPC8240 to Host Interrupt signal */ -#define LED_LAST_FUNCTION LED_HOST_INT /* last function */ - -/* - * Forward declarations - */ -int i2155x_init (void); -void i2155x_write_scrapad(int idx, u32 val); -u32 i2155x_read_scrapad (int idx); -void i2155x_set_bar_base (int bar, u32 addr); -int i2155x_read_vpd (int offset, int size, unsigned char *data); - -int am79c95x_init (void); - -void set_led (unsigned int number, unsigned int function); -void fatal_error (unsigned int error_code); -void show_startup_phase (int phase); - - -#endif /* _PN62_H_ */ diff --git a/board/prodrive/p3mx/Makefile b/board/prodrive/p3mx/Makefile index 43caffbc22..6ddda2296d 100644 --- a/board/prodrive/p3mx/Makefile +++ b/board/prodrive/p3mx/Makefile @@ -5,10 +5,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../../Marvell/common) -endif - obj-y = misc.o obj-y += p3mx.o mpsc.o mv_eth.o pci.o sdram_init.o serial.o \ ../../Marvell/common/i2c.o ../../Marvell/common/memory.o diff --git a/board/psyent/pci5441/Makefile b/board/psyent/pci5441/Makefile index 9a66cfdfe8..364f163e4f 100644 --- a/board/psyent/pci5441/Makefile +++ b/board/psyent/pci5441/Makefile @@ -5,8 +5,4 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common) -endif - obj-y := pci5441.o ../common/AMDLV065D.o diff --git a/board/psyent/pci5441/config.mk b/board/psyent/pci5441/config.mk index 00ff743c96..776fa8ab40 100644 --- a/board/psyent/pci5441/config.mk +++ b/board/psyent/pci5441/config.mk @@ -8,7 +8,6 @@ CONFIG_SYS_TEXT_BASE = 0x018e0000 PLATFORM_CPPFLAGS += -mno-hw-div -mno-hw-mul -PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(VENDOR)/include ifeq ($(debug),1) PLATFORM_CPPFLAGS += -DDEBUG diff --git a/board/psyent/pk1c20/Makefile b/board/psyent/pk1c20/Makefile index 286db94aef..5450f93ac3 100644 --- a/board/psyent/pk1c20/Makefile +++ b/board/psyent/pk1c20/Makefile @@ -5,8 +5,4 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common) -endif - obj-y := pk1c20.o led.o ../common/AMDLV065D.o diff --git a/board/psyent/pk1c20/config.mk b/board/psyent/pk1c20/config.mk index 7b0810a302..83cfadc113 100644 --- a/board/psyent/pk1c20/config.mk +++ b/board/psyent/pk1c20/config.mk @@ -8,7 +8,6 @@ CONFIG_SYS_TEXT_BASE = 0x01fc0000 PLATFORM_CPPFLAGS += -mno-hw-div -mno-hw-mul -PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(VENDOR)/include ifeq ($(debug),1) PLATFORM_CPPFLAGS += -DDEBUG diff --git a/board/qemu-malta/lowlevel_init.S b/board/qemu-malta/lowlevel_init.S deleted file mode 100644 index fa0b6a7d13..0000000000 --- a/board/qemu-malta/lowlevel_init.S +++ /dev/null @@ -1,69 +0,0 @@ -/* - * Copyright (C) 2013 Gabor Juhos <juhosg@openwrt.org> - * - * SPDX-License-Identifier: GPL-2.0 - */ - -#include <config.h> -#include <gt64120.h> - -#include <asm/addrspace.h> -#include <asm/regdef.h> -#include <asm/malta.h> - -#ifdef CONFIG_SYS_BIG_ENDIAN -#define CPU_TO_GT32(_x) ((_x)) -#else -#define CPU_TO_GT32(_x) ( \ - (((_x) & 0xff) << 24) | (((_x) & 0xff00) << 8) | \ - (((_x) & 0xff0000) >> 8) | (((_x) & 0xff000000) >> 24)) -#endif - - .text - .set noreorder - .set mips32 - - .globl lowlevel_init -lowlevel_init: - - /* - * Load BAR registers of GT64120 as done by YAMON - * - * based on a patch sent by Antony Pavlov <antonynpavlov@gmail.com> - * to the barebox mailing list. - * The subject of the original patch: - * 'MIPS: qemu-malta: add YAMON-style GT64120 memory map' - * URL: - * http://www.mail-archive.com/barebox@lists.infradead.org/msg06128.html - * - * based on write_bootloader() in qemu.git/hw/mips_malta.c - * see GT64120 manual and qemu.git/hw/gt64xxx.c for details - */ - - /* move GT64120 registers from 0x14000000 to 0x1be00000 */ - li t1, KSEG1ADDR(GT_DEF_BASE) - li t0, CPU_TO_GT32(0xdf000000) - sw t0, GT_ISD_OFS(t1) - - /* setup MEM-to-PCI0 mapping */ - li t1, KSEG1ADDR(MALTA_GT_BASE) - - /* setup PCI0 io window to 0x18000000-0x181fffff */ - li t0, CPU_TO_GT32(0xc0000000) - sw t0, GT_PCI0IOLD_OFS(t1) - li t0, CPU_TO_GT32(0x40000000) - sw t0, GT_PCI0IOHD_OFS(t1) - - /* setup PCI0 mem windows */ - li t0, CPU_TO_GT32(0x80000000) - sw t0, GT_PCI0M0LD_OFS(t1) - li t0, CPU_TO_GT32(0x3f000000) - sw t0, GT_PCI0M0HD_OFS(t1) - - li t0, CPU_TO_GT32(0xc1000000) - sw t0, GT_PCI0M1LD_OFS(t1) - li t0, CPU_TO_GT32(0x5e000000) - sw t0, GT_PCI0M1HD_OFS(t1) - - jr ra - nop diff --git a/board/qemu-malta/qemu-malta.c b/board/qemu-malta/qemu-malta.c deleted file mode 100644 index 7eddf1ce66..0000000000 --- a/board/qemu-malta/qemu-malta.c +++ /dev/null @@ -1,47 +0,0 @@ -/* - * Copyright (C) 2013 Gabor Juhos <juhosg@openwrt.org> - * - * SPDX-License-Identifier: GPL-2.0 - */ - -#include <common.h> -#include <netdev.h> - -#include <asm/addrspace.h> -#include <asm/io.h> -#include <asm/malta.h> -#include <pci_gt64120.h> - -phys_size_t initdram(int board_type) -{ - return CONFIG_SYS_MEM_SIZE; -} - -int checkboard(void) -{ - puts("Board: MIPS Malta CoreLV (Qemu)\n"); - return 0; -} - -int board_eth_init(bd_t *bis) -{ - return pci_eth_init(bis); -} - -void _machine_restart(void) -{ - void __iomem *reset_base; - - reset_base = (void __iomem *)CKSEG1ADDR(MALTA_RESET_BASE); - __raw_writel(GORESET, reset_base); -} - -void pci_init_board(void) -{ - set_io_port_base(CKSEG1ADDR(MALTA_IO_PORT_BASE)); - - gt64120_pci_init((void *)CKSEG1ADDR(MALTA_GT_BASE), - 0x00000000, 0x00000000, CONFIG_SYS_MEM_SIZE, - 0x10000000, 0x10000000, 128 * 1024 * 1024, - 0x00000000, 0x00000000, 0x20000); -} diff --git a/board/rbc823/u-boot.lds b/board/rbc823/u-boot.lds index 191f9eb837..7676cf43b1 100644 --- a/board/rbc823/u-boot.lds +++ b/board/rbc823/u-boot.lds @@ -19,10 +19,10 @@ SECTIONS arch/powerpc/cpu/mpc8xx/start.o (.text*) arch/powerpc/cpu/mpc8xx/traps.o (.text*) - lib/libgeneric.o (.text*) - net/libnet.o (.text*) - arch/powerpc/cpu/mpc8xx/libmpc8xx.o (.text*) - arch/powerpc/lib/libpowerpc.o (.text*) + lib/built-in.o (.text*) + net/built-in.o (.text*) + arch/powerpc/cpu/mpc8xx/built-in.o (.text*) + arch/powerpc/lib/built-in.o (.text*) . = env_offset; common/env_embedded.o (.text*) diff --git a/board/renesas/ecovec/ecovec.c b/board/renesas/ecovec/ecovec.c index e2d365a187..fb4acf3641 100644 --- a/board/renesas/ecovec/ecovec.c +++ b/board/renesas/ecovec/ecovec.c @@ -57,8 +57,7 @@ int board_late_init(void) outl(inl(MSTPCR2) & ~0x10000000, MSTPCR2); - i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); - i2c_set_bus_num(CONFIG_SYS_I2C_MODULE); /* Use I2C 1 */ + i2c_set_bus_num(1); /* Use I2C 1 */ /* Read MAC address */ i2c_read(0x50, 0x10, 0, mac, 6); diff --git a/board/sandburst/karef/Makefile b/board/sandburst/karef/Makefile index 05c818791c..f890008be2 100644 --- a/board/sandburst/karef/Makefile +++ b/board/sandburst/karef/Makefile @@ -9,10 +9,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common) -endif - # TBS: add for debugging purposes BUILDUSER := $(shell whoami) FORCEBUILD := $(shell rm -f karef.o) diff --git a/board/sandburst/metrobox/Makefile b/board/sandburst/metrobox/Makefile index 76dfffc9c7..37d91a51a3 100644 --- a/board/sandburst/metrobox/Makefile +++ b/board/sandburst/metrobox/Makefile @@ -8,10 +8,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common) -endif - # TBS: add for debugging purposes BUILDUSER := $(shell whoami) FORCEBUILD := $(shell rm -f metrobox.o) diff --git a/board/sbc8548/Makefile b/board/sbc8548/Makefile index b1e32a668b..4c9b6cd60c 100644 --- a/board/sbc8548/Makefile +++ b/board/sbc8548/Makefile @@ -11,4 +11,4 @@ obj-y += sbc8548.o obj-y += law.o obj-y += tlb.o -obj-$(CONFIG_FSL_DDR2) += ddr.o +obj-$(CONFIG_SYS_FSL_DDR2) += ddr.o diff --git a/board/sbc8548/ddr.c b/board/sbc8548/ddr.c index 9508561133..24cc776a25 100644 --- a/board/sbc8548/ddr.c +++ b/board/sbc8548/ddr.c @@ -9,8 +9,8 @@ #include <common.h> #include <i2c.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, @@ -91,7 +91,8 @@ void get_spd(generic_spd_eeprom_t *spd, u8 i2c_address) */ phys_size_t fixed_sdram(void) { - volatile ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC8xxx_DDR_ADDR); + struct ccsr_ddr __iomem *ddr = + (struct ccsr_ddr __iomem *)(CONFIG_SYS_FSL_DDR_ADDR); out_be32(&ddr->cs0_bnds, 0x0000007f); out_be32(&ddr->cs1_bnds, 0x008000ff); diff --git a/board/sbc8548/sbc8548.c b/board/sbc8548/sbc8548.c index 3cd945f2c2..d584276253 100644 --- a/board/sbc8548/sbc8548.c +++ b/board/sbc8548/sbc8548.c @@ -15,7 +15,7 @@ #include <asm/processor.h> #include <asm/immap_85xx.h> #include <asm/fsl_pci.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <asm/fsl_serdes.h> #include <spd_sdram.h> #include <netdev.h> diff --git a/board/sbc8641d/Makefile b/board/sbc8641d/Makefile index 9626b06a5a..a9b20266bc 100644 --- a/board/sbc8641d/Makefile +++ b/board/sbc8641d/Makefile @@ -7,4 +7,4 @@ obj-y += sbc8641d.o obj-y += law.o -obj-$(CONFIG_FSL_DDR2) += ddr.o +obj-$(CONFIG_SYS_FSL_DDR2) += ddr.o diff --git a/board/sbc8641d/ddr.c b/board/sbc8641d/ddr.c index 996ffe206d..b31ea3432e 100644 --- a/board/sbc8641d/ddr.c +++ b/board/sbc8641d/ddr.c @@ -8,8 +8,8 @@ #include <common.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, diff --git a/board/sbc8641d/sbc8641d.c b/board/sbc8641d/sbc8641d.c index 0b5e8dc17e..4906be4889 100644 --- a/board/sbc8641d/sbc8641d.c +++ b/board/sbc8641d/sbc8641d.c @@ -18,7 +18,7 @@ #include <asm/processor.h> #include <asm/immap_86xx.h> #include <asm/fsl_pci.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <asm/fsl_serdes.h> #include <libfdt.h> #include <fdt_support.h> @@ -93,7 +93,7 @@ long int fixed_sdram (void) { #if !defined(CONFIG_SYS_RAMBOOT) volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile ccsr_ddr_t *ddr = &immap->im_ddr1; + volatile struct ccsr_ddr *ddr = &immap->im_ddr1; ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS; ddr->cs1_bnds = CONFIG_SYS_DDR_CS1_BNDS; @@ -111,7 +111,7 @@ long int fixed_sdram (void) ddr->sdram_cfg_2 = CONFIG_SYS_DDR_CFG_2; ddr->sdram_mode = CONFIG_SYS_DDR_MODE_1; ddr->sdram_mode_2 = CONFIG_SYS_DDR_MODE_2; - ddr->sdram_mode_cntl = CONFIG_SYS_DDR_MODE_CTL; + ddr->sdram_md_cntl = CONFIG_SYS_DDR_MODE_CTL; ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL; ddr->sdram_data_init = CONFIG_SYS_DDR_DATA_INIT; ddr->sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL; @@ -142,7 +142,7 @@ long int fixed_sdram (void) ddr->sdram_cfg_2 = CONFIG_SYS_DDR2_CFG_2; ddr->sdram_mode = CONFIG_SYS_DDR2_MODE_1; ddr->sdram_mode_2 = CONFIG_SYS_DDR2_MODE_2; - ddr->sdram_mode_cntl = CONFIG_SYS_DDR2_MODE_CTL; + ddr->sdram_md_cntl = CONFIG_SYS_DDR2_MODE_CTL; ddr->sdram_interval = CONFIG_SYS_DDR2_INTERVAL; ddr->sdram_data_init = CONFIG_SYS_DDR2_DATA_INIT; ddr->sdram_clk_cntl = CONFIG_SYS_DDR2_CLK_CTRL; diff --git a/board/siemens/common/board.c b/board/siemens/common/board.c index 6279c3281c..32d2ee4de9 100644 --- a/board/siemens/common/board.c +++ b/board/siemens/common/board.c @@ -42,7 +42,7 @@ void set_mux_conf_regs(void) { /* Initalize the board header */ enable_i2c0_pin_mux(); - i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); + i2c_set_bus_num(0); if (read_eeprom() < 0) puts("Could not get board ID.\n"); @@ -67,7 +67,7 @@ int board_init(void) #if defined(CONFIG_HW_WATCHDOG) hw_watchdog_init(); #endif /* defined(CONFIG_HW_WATCHDOG) */ - i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); + i2c_set_bus_num(0); if (read_eeprom() < 0) puts("Could not get board ID.\n"); diff --git a/board/siemens/dxr2/Makefile b/board/siemens/dxr2/Makefile index 5129c6e3b1..f15993216b 100644 --- a/board/siemens/dxr2/Makefile +++ b/board/siemens/dxr2/Makefile @@ -11,10 +11,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common) -endif - ifdef CONFIG_SPL_BUILD obj-y := mux.o endif diff --git a/board/siemens/pxm2/Makefile b/board/siemens/pxm2/Makefile index 5129c6e3b1..f15993216b 100644 --- a/board/siemens/pxm2/Makefile +++ b/board/siemens/pxm2/Makefile @@ -11,10 +11,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common) -endif - ifdef CONFIG_SPL_BUILD obj-y := mux.o endif diff --git a/board/siemens/rut/Makefile b/board/siemens/rut/Makefile index 5129c6e3b1..f15993216b 100644 --- a/board/siemens/rut/Makefile +++ b/board/siemens/rut/Makefile @@ -11,10 +11,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common) -endif - ifdef CONFIG_SPL_BUILD obj-y := mux.o endif diff --git a/board/socrates/Makefile b/board/socrates/Makefile index 0a088100e8..79bda718d5 100644 --- a/board/socrates/Makefile +++ b/board/socrates/Makefile @@ -12,4 +12,4 @@ obj-y += law.o obj-y += tlb.o obj-y += nand.o obj-y += sdram.o -obj-$(CONFIG_FSL_DDR2) += ddr.o +obj-$(CONFIG_SYS_FSL_DDR2) += ddr.o diff --git a/board/socrates/ddr.c b/board/socrates/ddr.c index e9db476f48..6bad4da394 100644 --- a/board/socrates/ddr.c +++ b/board/socrates/ddr.c @@ -8,8 +8,8 @@ #include <common.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, diff --git a/board/socrates/sdram.c b/board/socrates/sdram.c index 313efae90f..aebd02f76c 100644 --- a/board/socrates/sdram.c +++ b/board/socrates/sdram.c @@ -8,7 +8,7 @@ #include <common.h> #include <asm/processor.h> #include <asm/immap_85xx.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <asm/processor.h> #include <asm/mmu.h> #include <spd_sdram.h> @@ -24,7 +24,8 @@ */ phys_size_t fixed_sdram(void) { - volatile ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC8xxx_DDR_ADDR); + struct ccsr_ddr __iomem *ddr = + (struct ccsr_ddr __iomem *)(CONFIG_SYS_FSL_DDR_ADDR); /* * Disable memory controller. diff --git a/board/spd8xx/u-boot.lds b/board/spd8xx/u-boot.lds index 2a68934c32..463af7eaa4 100644 --- a/board/spd8xx/u-boot.lds +++ b/board/spd8xx/u-boot.lds @@ -18,8 +18,8 @@ SECTIONS arch/powerpc/cpu/mpc8xx/start.o (.text*) arch/powerpc/cpu/mpc8xx/traps.o (.text*) - net/libnet.o (.text*) - arch/powerpc/cpu/mpc8xx/libmpc8xx.o (.text*) + net/built-in.o (.text*) + arch/powerpc/cpu/mpc8xx/built-in.o (.text*) *(.text.v*printf) . = DEFINED(env_offset) ? env_offset : .; diff --git a/board/stx/stxgp3/Makefile b/board/stx/stxgp3/Makefile index 9b724347de..78e2d6c96f 100644 --- a/board/stx/stxgp3/Makefile +++ b/board/stx/stxgp3/Makefile @@ -9,4 +9,4 @@ obj-y += stxgp3.o obj-y += law.o obj-y += tlb.o obj-y += flash.o -obj-$(CONFIG_FSL_DDR1) += ddr.o +obj-$(CONFIG_SYS_FSL_DDR1) += ddr.o diff --git a/board/stx/stxgp3/ddr.c b/board/stx/stxgp3/ddr.c index 9e79815278..41d4cfe738 100644 --- a/board/stx/stxgp3/ddr.c +++ b/board/stx/stxgp3/ddr.c @@ -8,8 +8,8 @@ #include <common.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, diff --git a/board/stx/stxgp3/stxgp3.c b/board/stx/stxgp3/stxgp3.c index bd683f6af8..c80d5259ce 100644 --- a/board/stx/stxgp3/stxgp3.c +++ b/board/stx/stxgp3/stxgp3.c @@ -18,7 +18,7 @@ #include <asm/processor.h> #include <asm/mmu.h> #include <asm/immap_85xx.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <ioports.h> #include <asm/io.h> #include <spd_sdram.h> diff --git a/board/stx/stxssa/Makefile b/board/stx/stxssa/Makefile index 17e0aaea7e..b1d4b0a270 100644 --- a/board/stx/stxssa/Makefile +++ b/board/stx/stxssa/Makefile @@ -8,4 +8,4 @@ obj-y += stxssa.o obj-y += law.o obj-y += tlb.o -obj-$(CONFIG_FSL_DDR1) += ddr.o +obj-$(CONFIG_SYS_FSL_DDR1) += ddr.o diff --git a/board/stx/stxssa/ddr.c b/board/stx/stxssa/ddr.c index 71be3bf636..1ccd4c5183 100644 --- a/board/stx/stxssa/ddr.c +++ b/board/stx/stxssa/ddr.c @@ -9,8 +9,8 @@ #include <common.h> #include <i2c.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, diff --git a/board/stx/stxssa/stxssa.c b/board/stx/stxssa/stxssa.c index c08a18bffe..f5c3d750ce 100644 --- a/board/stx/stxssa/stxssa.c +++ b/board/stx/stxssa/stxssa.c @@ -19,7 +19,7 @@ #include <asm/mmu.h> #include <asm/immap_85xx.h> #include <asm/fsl_pci.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <ioports.h> #include <asm/io.h> #include <spd_sdram.h> diff --git a/board/svm_sc8xx/u-boot.lds b/board/svm_sc8xx/u-boot.lds index 49226251b2..df564e9395 100644 --- a/board/svm_sc8xx/u-boot.lds +++ b/board/svm_sc8xx/u-boot.lds @@ -17,11 +17,11 @@ SECTIONS /* the sector layout of our flash chips! XXX FIXME XXX */ arch/powerpc/cpu/mpc8xx/start.o (.text*) arch/powerpc/cpu/mpc8xx/traps.o (.text*) - lib/libgeneric.o (.text*) - net/libnet.o (.text*) - arch/powerpc/cpu/mpc8xx/libmpc8xx.o (.text*) - arch/powerpc/lib/libpowerpc.o (.text*) - board/svm_sc8xx/libsvm_sc8xx.o (.text*) + lib/built-in.o (.text*) + net/built-in.o (.text*) + arch/powerpc/cpu/mpc8xx/built-in.o (.text*) + arch/powerpc/lib/built-in.o (.text*) + board/svm_sc8xx/built-in.o (.text*) *(.text.*printf) *(.text.do_mem_*) *(.text.flash*) diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c index 1459fae253..33693e4ead 100644 --- a/board/ti/am335x/board.c +++ b/board/ti/am335x/board.c @@ -380,7 +380,7 @@ const struct dpll_params *get_dpll_ddr_params(void) struct am335x_baseboard_id header; enable_i2c0_pin_mux(); - i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); + i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE); if (read_eeprom(&header) < 0) puts("Could not get board ID.\n"); @@ -464,26 +464,14 @@ void sdram_init(void) */ int board_init(void) { -#ifdef CONFIG_NOR - const u32 gpmc_nor[GPMC_MAX_REG] = { STNOR_GPMC_CONFIG1, - STNOR_GPMC_CONFIG2, STNOR_GPMC_CONFIG3, STNOR_GPMC_CONFIG4, - STNOR_GPMC_CONFIG5, STNOR_GPMC_CONFIG6, STNOR_GPMC_CONFIG7 }; -#endif - #if defined(CONFIG_HW_WATCHDOG) hw_watchdog_init(); #endif gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; - +#if defined(CONFIG_NOR) || defined(CONFIG_NAND) gpmc_init(); - -#ifdef CONFIG_NOR - /* Reconfigure CS0 for NOR instead of NAND. */ - enable_gpmc_cs_config(gpmc_nor, &gpmc_cfg->cs[0], - CONFIG_SYS_FLASH_BASE, GPMC_SIZE_16M); #endif - return 0; } diff --git a/board/ti/am335x/u-boot.lds b/board/ti/am335x/u-boot.lds index 9f96a43898..6a734b30ac 100644 --- a/board/ti/am335x/u-boot.lds +++ b/board/ti/am335x/u-boot.lds @@ -35,7 +35,7 @@ SECTIONS { *(.__image_copy_start) CPUDIR/start.o (.text*) - board/ti/am335x/libam335x.o (.text*) + board/ti/am335x/built-in.o (.text*) *(.text*) } diff --git a/board/ti/am3517crane/am3517crane.c b/board/ti/am3517crane/am3517crane.c index 5eb97ff378..a649697257 100644 --- a/board/ti/am3517crane/am3517crane.c +++ b/board/ti/am3517crane/am3517crane.c @@ -43,8 +43,8 @@ int board_init(void) */ int misc_init_r(void) { -#ifdef CONFIG_DRIVER_OMAP34XX_I2C - i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); +#ifdef CONFIG_SYS_I2C_OMAP34XX + i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE); #endif dieid_num_r(); diff --git a/board/ti/beagle/Makefile b/board/ti/beagle/Makefile index 9f55e8f358..7a858be5e4 100644 --- a/board/ti/beagle/Makefile +++ b/board/ti/beagle/Makefile @@ -5,5 +5,5 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-y := $(BOARD).o +obj-y := beagle.o obj-$(CONFIG_STATUS_LED) += led.o diff --git a/board/ti/evm/evm.c b/board/ti/evm/evm.c index c71c218529..81dd081d76 100644 --- a/board/ti/evm/evm.c +++ b/board/ti/evm/evm.c @@ -146,8 +146,8 @@ void get_board_mem_timings(struct board_sdrc_timings *timings) int misc_init_r(void) { -#ifdef CONFIG_DRIVER_OMAP34XX_I2C - i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); +#ifdef CONFIG_SYS_I2C_OMAP34XX + i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE); #endif #if defined(CONFIG_CMD_NET) diff --git a/board/toradex/colibri_t20_iris/Makefile b/board/toradex/colibri_t20_iris/Makefile index 7ca3fe596f..ebeac70ea1 100644 --- a/board/toradex/colibri_t20_iris/Makefile +++ b/board/toradex/colibri_t20_iris/Makefile @@ -4,9 +4,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -$(shell mkdir -p $(obj)../../nvidia/common) -$(shell mkdir -p $(obj)../colibri_t20-common) - obj-y := ../../nvidia/common/board.o obj-y += ../colibri_t20-common/colibri_t20-common.o obj-y += colibri_t20_iris.o diff --git a/board/tqc/tqm5200/Makefile b/board/tqc/tqm5200/Makefile index 757f4729ab..80c1eba87c 100644 --- a/board/tqc/tqm5200/Makefile +++ b/board/tqc/tqm5200/Makefile @@ -6,6 +6,3 @@ # obj-y := tqm5200.o cmd_stk52xx.o cmd_tb5200.o cam5200_flash.o - -$(obj)cam5200_flash.o: cam5200_flash.c - $(CC) $(CFLAGS) -c -o $@ $< diff --git a/board/tqc/tqm8260/Makefile b/board/tqc/tqm8260/Makefile index dc4a528083..6b8573d9ab 100644 --- a/board/tqc/tqm8260/Makefile +++ b/board/tqc/tqm8260/Makefile @@ -5,8 +5,4 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../tqm8xx/) -endif - obj-y = tqm8260.o ../tqm8xx/load_sernum_ethaddr.o diff --git a/board/tqc/tqm8272/Makefile b/board/tqc/tqm8272/Makefile index 09af765f05..8bf02414e3 100644 --- a/board/tqc/tqm8272/Makefile +++ b/board/tqc/tqm8272/Makefile @@ -5,8 +5,4 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../tqm8xx/) -endif - obj-y = tqm8272.o ../tqm8xx/load_sernum_ethaddr.o nand.o diff --git a/board/tqc/tqm8xx/u-boot.lds b/board/tqc/tqm8xx/u-boot.lds index cbfc94f57e..b77ae56c51 100644 --- a/board/tqc/tqm8xx/u-boot.lds +++ b/board/tqc/tqm8xx/u-boot.lds @@ -18,13 +18,13 @@ SECTIONS arch/powerpc/cpu/mpc8xx/start.o (.text*) arch/powerpc/cpu/mpc8xx/traps.o (.text*) - arch/powerpc/cpu/mpc8xx/libmpc8xx.o (.text*) - arch/powerpc/lib/libpowerpc.o (.text*) - board/tqc/tqm8xx/libtqm8xx.o (.text*) - disk/libdisk.o (.text*) - drivers/net/libnet.o (.text*) - drivers/libdrivers.o (.text.pcmcia_on) - drivers/libdrivers.o (.text.pcmcia_hardware_enable) + arch/powerpc/cpu/mpc8xx/built-in.o (.text*) + arch/powerpc/lib/built-in.o (.text*) + board/tqc/tqm8xx/built-in.o (.text*) + disk/built-in.o (.text*) + drivers/net/built-in.o (.text*) + drivers/built-in.o (.text.pcmcia_on) + drivers/built-in.o (.text.pcmcia_hardware_enable) . = DEFINED(env_offset) ? env_offset : .; common/env_embedded.o (.ppcenv*) diff --git a/board/vpac270/u-boot-spl.lds b/board/vpac270/u-boot-spl.lds index 08c78b3dbb..02d107c4b9 100644 --- a/board/vpac270/u-boot-spl.lds +++ b/board/vpac270/u-boot-spl.lds @@ -20,8 +20,8 @@ SECTIONS .text.0 : { arch/arm/cpu/pxa/start.o (.text*) - board/vpac270/libvpac270.o (.text*) - drivers/mtd/onenand/libonenand.o (.text*) + board/vpac270/built-in.o (.text*) + drivers/mtd/onenand/built-in.o (.text*) } diff --git a/board/xes/xpedite517x/ddr.c b/board/xes/xpedite517x/ddr.c index f48c02fdae..fd602ea7e0 100644 --- a/board/xes/xpedite517x/ddr.c +++ b/board/xes/xpedite517x/ddr.c @@ -7,8 +7,8 @@ #include <common.h> #include <i2c.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> void get_spd(ddr2_spd_eeprom_t *spd, u8 i2c_address) { diff --git a/board/xes/xpedite517x/xpedite517x.c b/board/xes/xpedite517x/xpedite517x.c index 1782042510..b7ad349502 100644 --- a/board/xes/xpedite517x/xpedite517x.c +++ b/board/xes/xpedite517x/xpedite517x.c @@ -6,7 +6,7 @@ #include <common.h> #include <asm/processor.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <asm/mmu.h> #include <asm/io.h> #include <fdt_support.h> diff --git a/board/xes/xpedite520x/ddr.c b/board/xes/xpedite520x/ddr.c index 3671cb8af9..5c5eadc93f 100644 --- a/board/xes/xpedite520x/ddr.c +++ b/board/xes/xpedite520x/ddr.c @@ -9,8 +9,8 @@ #include <common.h> #include <i2c.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> void get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address) { diff --git a/board/xes/xpedite537x/ddr.c b/board/xes/xpedite537x/ddr.c index f41ae73755..56b5a187d8 100644 --- a/board/xes/xpedite537x/ddr.c +++ b/board/xes/xpedite537x/ddr.c @@ -8,8 +8,8 @@ #include <common.h> #include <i2c.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> void get_spd(ddr2_spd_eeprom_t *spd, u8 i2c_address) { diff --git a/board/xes/xpedite550x/ddr.c b/board/xes/xpedite550x/ddr.c index 9fc6f048c4..0c0605e3a9 100644 --- a/board/xes/xpedite550x/ddr.c +++ b/board/xes/xpedite550x/ddr.c @@ -8,8 +8,8 @@ #include <common.h> #include <i2c.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> void get_spd(ddr3_spd_eeprom_t *spd, u8 i2c_address) { diff --git a/board/xilinx/ppc405-generic/Makefile b/board/xilinx/ppc405-generic/Makefile index 1562f1775e..c9da870657 100644 --- a/board/xilinx/ppc405-generic/Makefile +++ b/board/xilinx/ppc405-generic/Makefile @@ -9,8 +9,4 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../../xilinx/ppc405-generic) -endif - obj-y += ../../xilinx/ppc405-generic/xilinx_ppc405_generic.o diff --git a/board/xilinx/ppc440-generic/Makefile b/board/xilinx/ppc440-generic/Makefile index b2227c58a5..0acd95d6e4 100644 --- a/board/xilinx/ppc440-generic/Makefile +++ b/board/xilinx/ppc440-generic/Makefile @@ -9,9 +9,5 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../../xilinx/ppc440-generic) -endif - obj-y += ../../xilinx/ppc440-generic/xilinx_ppc440_generic.o extra-y += ../../xilinx/ppc440-generic/init.o diff --git a/boards.cfg b/boards.cfg index c97b41a18c..2128996a1e 100644 --- a/boards.cfg +++ b/boards.cfg @@ -489,10 +489,10 @@ Active m68k mcf547x_8x - freescale m548xevb Active m68k mcf547x_8x - freescale m548xevb M5485GFE M5485EVB:SYS_BUSCLK=100000000,SYS_BOOTSZ=4,SYS_DRAMSZ=64 TsiChung Liew <Tsi-Chung.Liew@freescale.com> Active m68k mcf547x_8x - freescale m548xevb M5485HFE M5485EVB:SYS_BUSCLK=100000000,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_NOR1SZ=16,SYS_VIDEO TsiChung Liew <Tsi-Chung.Liew@freescale.com> Active microblaze microblaze - xilinx microblaze-generic microblaze-generic - Michal Simek <monstr@monstr.eu> -Active mips mips32 - - qemu-malta qemu_malta qemu-malta:MIPS32,SYS_BIG_ENDIAN - -Active mips mips32 - - qemu-malta qemu_maltael qemu-malta:MIPS32,SYS_LITTLE_ENDIAN - Active mips mips32 - - qemu-mips qemu_mips qemu-mips:SYS_BIG_ENDIAN Vlad Lungu <vlad.lungu@windriver.com> Active mips mips32 - - qemu-mips qemu_mipsel qemu-mips:SYS_LITTLE_ENDIAN - +Active mips mips32 - imgtec malta malta malta:MIPS32,SYS_BIG_ENDIAN Paul Burton <paul.burton@imgtec.com> +Active mips mips32 - imgtec malta maltael malta:MIPS32,SYS_LITTLE_ENDIAN Paul Burton <paul.burton@imgtec.com> Active mips mips32 - micronas vct vct_platinum vct:VCT_PLATINUM - Active mips mips32 - micronas vct vct_platinum_onenand vct:VCT_PLATINUM,VCT_ONENAND - Active mips mips32 - micronas vct vct_platinum_onenand_small vct:VCT_PLATINUM,VCT_ONENAND,VCT_SMALL_IMAGE - @@ -639,7 +639,6 @@ Active powerpc mpc824x - - hidden_dragon Active powerpc mpc824x - - linkstation linkstation_HGLAN linkstation:HGLAN=1 Guennadi Liakhovetski <g.liakhovetski@gmx.de> Active powerpc mpc824x - - musenki MUSENKI - Jim Thompson <jim@musenki.com> Active powerpc mpc824x - - mvblue MVBLUE - - -Active powerpc mpc824x - - pn62 PN62 - Wolfgang Grandegger <wg@denx.de> Active powerpc mpc824x - - sandpoint Sandpoint8240 - Wolfgang Denk <wd@denx.de> Active powerpc mpc824x - - sandpoint Sandpoint8245 - Jim Thompson <jim@musenki.com> Active powerpc mpc824x - etin - debris - Sangmoon Kim <dogoil@etinsys.com> @@ -970,7 +969,14 @@ Active powerpc mpc85xx - freescale t4qds Active powerpc mpc85xx - freescale t4qds T4240QDS_SDCARD T4240QDS:PPC_T4240,RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000 - Active powerpc mpc85xx - freescale t4qds T4240QDS_SPIFLASH T4240QDS:PPC_T4240,RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000 - Active powerpc mpc85xx - freescale t4qds T4240QDS_SRIO_PCIE_BOOT T4240QDS:PPC_T4240,SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF80000 - -Active powerpc mpc85xx - freescale t1040qds T1040QDS T1040QDS:PPC_T1040 Naveen Burmi <NaveenBurmi@freescale.com> +Active powerpc mpc85xx - freescale t1040qds T1040QDS T1040QDS:PPC_T1040 Poonam Aggrwal <poonam.aggrwal@freescale.com> +Active powerpc mpc85xx - freescale t104xrdb T1040RDB T1040RDB:PPC_T1040 Poonam Aggrwal <poonam.aggrwal@freescale.com> +Active powerpc mpc85xx - freescale t104xrdb T1042RDB_PI T1042RDB_PI:PPC_T1042 Poonam Aggrwal <poonam.aggrwal@freescale.com> +Active powerpc mpc85xx - freescale t2080qds T2080QDS T2080QDS:PPC_T2080 +Active powerpc mpc85xx - freescale t2080qds T2080QDS_SDCARD T2080QDS:PPC_T2080,RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000 +Active powerpc mpc85xx - freescale t2080qds T2080QDS_SPIFLASH T2080QDS:PPC_T2080,RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000 +Active powerpc mpc85xx - freescale t2080qds T2080QDS_NAND T2080QDS:PPC_T2080,RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF80000 +Active powerpc mpc85xx - freescale t2080qds T2080QDS_SRIO_PCIE_BOOT T2080QDS:PPC_T2080,SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF80000 Active powerpc mpc85xx - gdsys p1022 controlcenterd_36BIT_SDCARD controlcenterd:36BIT,SDCARD Dirk Eibach <eibach@gdsys.de> Active powerpc mpc85xx - gdsys p1022 controlcenterd_36BIT_SDCARD_DEVELOP controlcenterd:36BIT,SDCARD,DEVELOP Dirk Eibach <eibach@gdsys.de> Active powerpc mpc85xx - gdsys p1022 controlcenterd_TRAILBLAZER controlcenterd:TRAILBLAZER,SPIFLASH Dirk Eibach <eibach@gdsys.de> diff --git a/common/Makefile b/common/Makefile index 32acbf9357..74404beb36 100644 --- a/common/Makefile +++ b/common/Makefile @@ -232,14 +232,11 @@ obj-y += stdio.o CPPFLAGS += -I.. -$(obj)env_embedded.o: $(src)env_embedded.c $(obj)../tools/envcrc +$(obj)env_embedded.o: $(src)env_embedded.c $(CC) $(AFLAGS) -Wa,--no-warn \ -DENV_CRC=$(shell $(obj)../tools/envcrc) \ -c -o $@ $(src)env_embedded.c -$(obj)../tools/envcrc: - $(MAKE) -C ../tools - # SEE README.arm-unaligned-accesses $(obj)hush.o: CFLAGS += $(PLATFORM_NO_UNALIGNED) $(obj)fdt_support.o: CFLAGS += $(PLATFORM_NO_UNALIGNED) diff --git a/common/cmd_eeprom.c b/common/cmd_eeprom.c index ef694d8f87..02539c40a0 100644 --- a/common/cmd_eeprom.c +++ b/common/cmd_eeprom.c @@ -161,7 +161,7 @@ int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt #if defined(CONFIG_SPI) && !defined(CONFIG_ENV_EEPROM_IS_ON_I2C) spi_read (addr, alen, buffer, len); #else - if (i2c_read (addr[0], offset, alen-1, buffer, len) != 0) + if (i2c_read (addr[0], addr[1], alen-1, buffer, len) != 0) rcode = 1; #endif buffer += len; @@ -339,7 +339,7 @@ int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cn /* Write is enabled ... now write eeprom value. */ #endif - if (i2c_write (addr[0], offset, alen-1, buffer, len) != 0) + if (i2c_write (addr[0], addr[1], alen-1, buffer, len) != 0) rcode = 1; #endif diff --git a/common/cmd_mdio.c b/common/cmd_mdio.c index 65a1f10a9f..fb13d05075 100644 --- a/common/cmd_mdio.c +++ b/common/cmd_mdio.c @@ -41,9 +41,11 @@ static int extract_range(char *input, int *plo, int *phi) return 0; } -static int mdio_write_ranges(struct mii_dev *bus, int addrlo, +static int mdio_write_ranges(struct phy_device *phydev, struct mii_dev *bus, + int addrlo, int addrhi, int devadlo, int devadhi, - int reglo, int reghi, unsigned short data) + int reglo, int reghi, unsigned short data, + int extended) { int addr, devad, reg; int err = 0; @@ -51,7 +53,12 @@ static int mdio_write_ranges(struct mii_dev *bus, int addrlo, for (addr = addrlo; addr <= addrhi; addr++) { for (devad = devadlo; devad <= devadhi; devad++) { for (reg = reglo; reg <= reghi; reg++) { - err = bus->write(bus, addr, devad, reg, data); + if (!extended) + err = bus->write(bus, addr, devad, + reg, data); + else + err = phydev->drv->writeext(phydev, + addr, devad, reg, data); if (err) goto err_out; @@ -63,9 +70,10 @@ err_out: return err; } -static int mdio_read_ranges(struct mii_dev *bus, int addrlo, +static int mdio_read_ranges(struct phy_device *phydev, struct mii_dev *bus, + int addrlo, int addrhi, int devadlo, int devadhi, - int reglo, int reghi) + int reglo, int reghi, int extended) { int addr, devad, reg; @@ -77,7 +85,12 @@ static int mdio_read_ranges(struct mii_dev *bus, int addrlo, for (reg = reglo; reg <= reghi; reg++) { int val; - val = bus->read(bus, addr, devad, reg); + if (!extended) + val = bus->read(bus, addr, devad, reg); + else + val = phydev->drv->readext(phydev, addr, + devad, reg); + if (val < 0) { printf("Error\n"); @@ -126,9 +139,10 @@ static int extract_reg_range(char *input, int *devadlo, int *devadhi, } static int extract_phy_range(char *const argv[], int argc, struct mii_dev **bus, + struct phy_device **phydev, int *addrlo, int *addrhi) { - struct phy_device *phydev; + struct phy_device *dev = *phydev; if ((argc < 1) || (argc > 2)) return -1; @@ -154,11 +168,11 @@ static int extract_phy_range(char *const argv[], int argc, struct mii_dev **bus, * device by the given name. If none are found, we call * extract_range() on the string, and see if it's an address range. */ - phydev = mdio_phydev_for_ethname(argv[0]); + dev = mdio_phydev_for_ethname(argv[0]); - if (phydev) { - *addrlo = *addrhi = phydev->addr; - *bus = phydev->bus; + if (dev) { + *addrlo = *addrhi = dev->addr; + *bus = dev->bus; return 0; } @@ -175,6 +189,8 @@ static int do_mdio(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) unsigned short data; int pos = argc - 1; struct mii_dev *bus; + struct phy_device *phydev = NULL; + int extended = 0; if (argc < 2) return CMD_RET_USAGE; @@ -197,6 +213,29 @@ static int do_mdio(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) if (flag & CMD_FLAG_REPEAT) op[0] = last_op[0]; + if (strlen(argv[1]) > 1) { + op[1] = argv[1][1]; + if (op[1] == 'x') { + phydev = mdio_phydev_for_ethname(argv[2]); + + if (phydev) { + addrlo = phydev->addr; + addrhi = addrlo; + bus = phydev->bus; + extended = 1; + } else { + return -1; + } + + if (!phydev->drv || + (!phydev->drv->writeext && (op[0] == 'w')) || + (!phydev->drv->readext && (op[0] == 'r'))) { + puts("PHY does not have extended functions\n"); + return -1; + } + } + } + switch (op[0]) { case 'w': if (pos > 1) @@ -210,7 +249,7 @@ static int do_mdio(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) default: if (pos > 1) if (extract_phy_range(&(argv[2]), pos - 1, &bus, - &addrlo, &addrhi)) + &phydev, &addrlo, &addrhi)) return -1; break; @@ -227,13 +266,13 @@ static int do_mdio(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) switch (op[0]) { case 'w': - mdio_write_ranges(bus, addrlo, addrhi, devadlo, devadhi, - reglo, reghi, data); + mdio_write_ranges(phydev, bus, addrlo, addrhi, devadlo, devadhi, + reglo, reghi, data, extended); break; case 'r': - mdio_read_ranges(bus, addrlo, addrhi, devadlo, devadhi, - reglo, reghi); + mdio_read_ranges(phydev, bus, addrlo, addrhi, devadlo, devadhi, + reglo, reghi, extended); break; } @@ -262,6 +301,10 @@ U_BOOT_CMD( "read PHY's register at <devad>.<reg>\n" "mdio write <phydev> [<devad>.]<reg> <data> - " "write PHY's register at <devad>.<reg>\n" + "mdio rx <phydev> [<devad>.]<reg> - " + "read PHY's extended register at <devad>.<reg>\n" + "mdio wx <phydev> [<devad>.]<reg> <data> - " + "write PHY's extended register at <devad>.<reg>\n" "<phydev> may be:\n" " <busname> <addr>\n" " <addr>\n" diff --git a/common/cmd_mii.c b/common/cmd_mii.c index d3dd6b1c9e..b82a7ce612 100644 --- a/common/cmd_mii.c +++ b/common/cmd_mii.c @@ -78,9 +78,9 @@ static const MII_field_desc_t reg_3_desc_tbl[] = { static const MII_field_desc_t reg_4_desc_tbl[] = { { 15, 15, 0x01, "next page able" }, - { 14, 14, 0x01, "reserved" }, + { 14, 14, 0x01, "(reserved)" }, { 13, 13, 0x01, "remote fault" }, - { 12, 12, 0x01, "reserved" }, + { 12, 12, 0x01, "(reserved)" }, { 11, 11, 0x01, "asymmetric pause" }, { 10, 10, 0x01, "pause enable" }, { 9, 9, 0x01, "100BASE-T4 able" }, diff --git a/common/hash.c b/common/hash.c index 722c40b3f3..872cd85428 100644 --- a/common/hash.c +++ b/common/hash.c @@ -325,8 +325,8 @@ int hash_command(const char *algo_name, int flags, cmd_tbl_t *cmdtp, int flag, printf("CRC32 for %08lx ... %08lx ==> %08lx\n", addr, addr + len - 1, crc); - if (argc > 3) { - ptr = (ulong *)simple_strtoul(argv[3], NULL, 16); + if (argc >= 3) { + ptr = (ulong *)simple_strtoul(argv[0], NULL, 16); *ptr = crc; } } diff --git a/common/lcd.c b/common/lcd.c index 5dd7948121..56bf067fb5 100644 --- a/common/lcd.c +++ b/common/lcd.c @@ -386,8 +386,13 @@ static void test_pattern(void) /************************************************************************/ /* ** GENERIC Initialization Routines */ /************************************************************************/ - -int lcd_get_size(int *line_length) +/* + * With most lcd drivers the line length is set up + * by calculating it from panel_info parameters. Some + * drivers need to calculate the line length differently, + * so make the function weak to allow overriding it. + */ +__weak int lcd_get_size(int *line_length) { *line_length = (panel_info.vl_col * NBITS(panel_info.vl_bpix)) / 8; return *line_length * panel_info.vl_row; @@ -495,7 +500,6 @@ static int lcd_init(void *lcdbase) debug("[LCD] Using LCD frambuffer at %p\n", lcd_base); lcd_get_size(&lcd_line_length); - lcd_line_length = (panel_info.vl_col * NBITS(panel_info.vl_bpix)) / 8; lcd_is_enabled = 1; lcd_clear(); lcd_enable(); @@ -13,12 +13,6 @@ SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \ export SHELL -ifeq ($(CONFIG_TPL_BUILD),y) -SPL_BIN := u-boot-tpl -else -SPL_BIN := u-boot-spl -endif - ifeq ($(CURDIR),$(SRCTREE)) dir := else @@ -256,11 +250,16 @@ Please undefined CONFIG_SYS_GENERIC_BOARD in your board config file) endif endif +# Sandbox needs the base flags and includes, so keep them around +BASE_CPPFLAGS := $(CPPFLAGS) + ifneq ($(OBJTREE),$(SRCTREE)) -CPPFLAGS += -I$(OBJTREE)/include +BASE_INCLUDE_DIRS := $(OBJTREE)/include endif -CPPFLAGS += -I$(TOPDIR)/include -I$(SRCTREE)/arch/$(ARCH)/include +BASE_INCLUDE_DIRS += $(TOPDIR)/include $(SRCTREE)/arch/$(ARCH)/include + +CPPFLAGS += $(patsubst %, -I%, $(BASE_INCLUDE_DIRS)) CPPFLAGS += -fno-builtin -ffreestanding -nostdinc \ -isystem $(gccincdir) -pipe $(PLATFORM_CPPFLAGS) diff --git a/doc/README.malta b/doc/README.malta new file mode 100644 index 0000000000..a495d02455 --- /dev/null +++ b/doc/README.malta @@ -0,0 +1,16 @@ +MIPS Malta board + +How to flash using a MIPS Navigator Probe: + + - Ensure that your Malta has jumper JP1 fitted. Without this jumper you will + be unable to flash your Malta using a Navigator Probe. + + - Connect Navigator Console to your probe and Malta as usual. + + - Within Navigator Console run the following commands: + + source /path/to/u-boot/board/malta/flash-malta-boot.tcl + reset + flash-boot /path/to/u-boot/u-boot.bin + + - You should now be able to reboot your Malta to a U-boot shell. diff --git a/doc/README.nand b/doc/README.nand index 913e9b50b8..b91f1985d1 100644 --- a/doc/README.nand +++ b/doc/README.nand @@ -104,6 +104,16 @@ Configuration Options: CONFIG_SYS_MAX_NAND_DEVICE The maximum number of NAND devices you want to support. + CONFIG_SYS_NAND_MAX_ECCPOS + If specified, overrides the maximum number of ECC bytes + supported. Useful for reducing image size, especially with SPL. + This must be at least 48 if nand_base.c is used. + + CONFIG_SYS_NAND_MAX_OOBFREE + If specified, overrides the maximum number of free OOB regions + supported. Useful for reducing image size, especially with SPL. + This must be at least 2 if nand_base.c is used. + CONFIG_SYS_NAND_MAX_CHIPS The maximum number of NAND chips per device to be supported. @@ -169,6 +179,59 @@ Configuration Options: Please convert your driver even if you don't need the extra flexibility, so that one day we can eliminate the old mechanism. + + CONFIG_SYS_NAND_ONFI_DETECTION + Enables detection of ONFI compliant devices during probe. + And fetching device parameters flashed on device, by parsing + ONFI parameter page. + + CONFIG_BCH + Enables software based BCH ECC algorithm present in lib/bch.c + This is used by SoC platforms which do not have built-in ELM + hardware engine required for BCH ECC correction. + + +Platform specific options +========================= + CONFIG_NAND_OMAP_GPMC + Enables omap_gpmc.c driver for OMAPx and AMxxxx platforms. + GPMC controller is used for parallel NAND flash devices, and can + do ECC calculation (not ECC error detection) for HAM1, BCH4, BCH8 + and BCH16 ECC algorithms. + + CONFIG_NAND_OMAP_ELM + Enables omap_elm.c driver for OMAPx and AMxxxx platforms. + ELM controller is used for ECC error detection (not ECC calculation) + of BCH4, BCH8 and BCH16 ECC algorithms. + Some legacy platforms like OMAP3xx do not have in-built ELM h/w engine, + thus such SoC platforms need to depend on software library for ECC error + detection. However ECC calculation on such plaforms would still be + done by GPMC controller. + + CONFIG_NAND_OMAP_ECCSCHEME + On OMAP platforms, this CONFIG specifies NAND ECC scheme. + It can take following values: + OMAP_ECC_HAM1_CODE_SW + 1-bit Hamming code using software lib. + (for legacy devices only) + OMAP_ECC_HAM1_CODE_HW + 1-bit Hamming code using GPMC hardware. + (for legacy devices only) + OMAP_ECC_BCH4_CODE_HW_DETECTION_SW + 4-bit BCH code (unsupported) + OMAP_ECC_BCH4_CODE_HW + 4-bit BCH code (unsupported) + OMAP_ECC_BCH8_CODE_HW_DETECTION_SW + 8-bit BCH code with + - ecc calculation using GPMC hardware engine, + - error detection using software library. + - requires CONFIG_BCH to enable software BCH library + (For legacy device which do not have ELM h/w engine) + OMAP_ECC_BCH8_CODE_HW + 8-bit BCH code with + - ecc calculation using GPMC hardware engine, + - error detection using ELM hardware engine. + NOTE: ===== diff --git a/doc/README.omap3 b/doc/README.omap3 index 1fbe79db37..a62c357405 100644 --- a/doc/README.omap3 +++ b/doc/README.omap3 @@ -161,8 +161,7 @@ BCH8 To enable hardware assisted BCH8 (8-bit BCH [Bose, Chaudhuri, Hocquenghem]) on OMAP3 devices we can use the BCH library in lib/bch.c. To do so add CONFIG_BCH -to enable the library and CONFIG_NAND_OMAP_BCH8 to to enable hardware assisted -syndrom generation to your board config. +and set CONFIG_NAND_OMAP_ECCSCHEME=5 (refer README.nand) for selecting BCH8_SW. The NAND OOB layout is the same as in linux kernel, if the linux kernel BCH8 implementation for OMAP3 works for you so the u-boot version should also. When you require the SPL to read with BCH8 there are two more configs to diff --git a/doc/README.p1010rdb b/doc/README.p1010rdb deleted file mode 100644 index 6b2b5ff3fb..0000000000 --- a/doc/README.p1010rdb +++ /dev/null @@ -1,198 +0,0 @@ -Overview -========= -The P1010RDB is a Freescale reference design board that hosts the P1010 SoC. - -The P1010 is a cost-effective, low-power, highly integrated host processor -based on a Power Architecture e500v2 core (maximum core frequency 800/1000 MHz), -that addresses the requirements of several routing, gateways, storage, consumer, -and industrial applications. Applications of interest include the main CPUs and -I/O processors in network attached storage (NAS), the voice over IP (VoIP) -router/gateway, and wireless LAN (WLAN) and industrial controllers. - -The P1010RDB board features are as follows: -Memory subsystem: - - 1Gbyte unbuffered DDR3 SDRAM discrete devices (32-bit bus) - - 32 Mbyte NOR flash single-chip memory - - 32 Mbyte NAND flash memory - - 256 Kbit M24256 I2C EEPROM - - 16 Mbyte SPI memory - - I2C Board EEPROM 128x8 bit memory - - SD/MMC connector to interface with the SD memory card -Interfaces: - - PCIe: - - Lane0: x1 mini-PCIe slot - - Lane1: x1 PCIe standard slot - - SATA: - - 1 internal SATA connector to 2.5" 160G SATA2 HDD - - 1 eSATA connector to rear panel - - 10/100/1000 BaseT Ethernet ports: - - eTSEC1, RGMII: one 10/100/1000 port using Vitesse VSC8641XKO - - eTSEC2, SGMII: one 10/100/1000 port using Vitesse VSC8221 - - eTSEC3, SGMII: one 10/100/1000 port using Vitesse VSC8221 - - USB 2.0 port: - - x1 USB2.0 port: via an ULPI PHY to micro-AB connector - - x1 USB2.0 poort via an internal PHY to micro-AB connector - - FlexCAN ports: - - x2 DB-9 female connectors for FlexCAN bus(revision 2.0B) - interface; - - DUART interface: - - DUART interface: supports two UARTs up to 115200 bps for - console display - - J45 connectors are used for these 2 UART ports. - - TDM - - 2 FXS ports connected via an external SLIC to the TDM - interface. SLIC is controllled via SPI. - - 1 FXO port connected via a relay to FXS for switchover to - POTS -Board connectors: - - Mini-ITX power supply connector - - JTAG/COP for debugging -IEEE Std. 1588 signals for test and measurement -Real-time clock on I2C bus -POR - - support critical POR setting changed via switch on board -PCB - - 6-layer routing (4-layer signals, 2-layer power and ground) - - -Serial Port Configuration on P1010RDB -===================================== -Configure the serial port of the attached computer with the following values: - -Data rate: 115200 bps - -Number of data bits: 8 - -Parity: None - -Number of Stop bits: 1 - -Flow Control: Hardware/None - - -Settings of DIP-switch -====================== - SW4[1:4]= 1111 and SW6[4]=0 for boot from 16bit NOR flash - SW4[1:4]= 1000 and SW6[4]=1 for boot from 8bit NAND flash - SW4[1:4]= 0110 and SW6[4]=0 for boot from SPI flash -Note: 1 stands for 'on', 0 stands for 'off' - - -Setting of hwconfig -=================== -If FlexCAN or TDM is needed, please set "fsl_p1010mux:tdm_can=can" or -"fsl_p1010mux:tdm_can=tdm" explicitly in u-booot prompt as below for example: -setenv hwconfig "fsl_p1010mux:tdm_can=tdm;usb1:dr_mode=host,phy_type=utmi" -By default, don't set fsl_p1010mux:tdm_can, in this case, spi chip selection -is set to spi-flash instead of to SLIC/TDM/DAC and tdm_can_sel is set to TDM -instead of to CAN/UART1. - - -Build and burn u-boot to NOR flash -================================== -1. Build u-boot.bin image - export ARCH=powerpc - export CROSS_COMPILE=/your_path/powerpc-linux-gnu- - make P1010RDB_NOR - -2. Burn u-boot.bin into NOR flash - => tftp $loadaddr $uboot - => protect off eff80000 +$filesize - => erase eff80000 +$filesize - => cp.b $loadaddr eff80000 $filesize - -3. Check SW4[1:4]= 1111 and SW6[4]=0, then power on. - - -Alternate NOR bank -============================ -1. Burn u-boot.bin into alternate NOR bank - => tftp $loadaddr $uboot - => protect off eef80000 +$filesize - => erase eef80000 +$filesize - => cp.b $loadaddr eef80000 $filesize - -2. Switch to alternate NOR bank - => mw.b ffb00009 1 - => reset - or set SW1[8]= ON - -SW1[8]= OFF: Upper bank used for booting start -SW1[8]= ON: Lower bank used for booting start -CPLD NOR bank selection register address 0xFFB00009 Bit[0]: -0 - boot from upper 4 sectors -1 - boot from lower 4 sectors - - -Build and burn u-boot to NAND flash -=================================== -1. Build u-boot.bin image - export ARCH=powerpc - export CROSS_COMPILE=/your_path/powerpc-linux-gnu- - make P1010RDB_NAND - -2. Burn u-boot-nand.bin into NAND flash - => tftp $loadaddr $uboot-nand - => nand erase 0 $filesize - => nand write $loadaddr 0 $filesize - -3. Check SW4[1:4]= 1000 and SW6[4]=1, then power on. - - - -Build and burn u-boot to SPI flash -================================== -1. Build u-boot-spi.bin image - make P1010RDB_SPIFLASH_config; make - Boot up kernel with rootfs.ext2.gz.uboot.p1010rdb - Download u-boot.bin to linux and you can find some config files - under /usr/share such as config_xx.dat. Do below command: - boot_format config_ddr3_1gb_p1010rdb_800M.dat u-boot.bin -spi \ - u-boot-spi.bin - to generate u-boot-spi.bin. - -2. Burn u-boot-spi.bin into SPI flash - => tftp $loadaddr $uboot-spi - => sf erase 0 100000 - => sf write $loadaddr 0 $filesize - -3. Check SW4[1:4]= 0110 and SW6[4]=0, then power on. - - - -CPLD POR setting registers -========================== -1. Set POR switch selection register (addr 0xFFB00011) to 0. -2. Write CPLD POR registers (BCSR0~BCSR3, addr 0xFFB00014~0xFFB00017) with - proper values. - If change boot ROM location to NOR or NAND flash, need write the IFC_CS0 - switch command by I2C. -3. Send reset command. - After reset, the new POR setting will be implemented. - -Two examples are given in below: -Switch from NOR to NAND boot with default frequency: - => i2c dev 0 - => i2c mw 18 1 f9 - => i2c mw 18 3 f0 - => mw.b ffb00011 0 - => mw.b ffb00017 1 - => reset -Switch from NAND to NOR boot with Core/CCB/DDR (800/400/667 MHz): - => i2c dev 0 - => i2c mw 18 1 f1 - => i2c mw 18 3 f0 - => mw.b ffb00011 0 - => mw.b ffb00014 2 - => mw.b ffb00015 5 - => mw.b ffb00016 3 - => mw.b ffb00017 f - => reset - - -Boot Linux from network using TFTP on P1010RDB -============================================== -Place uImage, p1010rdb.dtb and rootfs files in the TFTP disk area. - => tftp 1000000 uImage - => tftp 2000000 p1010rdb.dtb - => tftp 3000000 rootfs.ext2.gz.uboot.p1010rdb - => bootm 1000000 3000000 2000000 - - -Please contact your local field applications engineer or sales representative -to obtain related documents, such as P1010-RDB User Guide for details. diff --git a/doc/README.scrapyard b/doc/README.scrapyard index a48ce7c866..604de0c8a7 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -12,6 +12,7 @@ easily if here is something they might want to dig for... Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= omap730p2 arm arm926ejs - 2013-11-11 +pn62 powerpc mpc824x - 2013-11-11 Wolfgang Grandegger <wg@grandegger.com> pdnb3 arm ixp 304db0b 2013-09-24 Stefan Roese <sr@denx.de> scpu arm ixp 304db0b 2013-09-24 Stefan Roese <sr@denx.de> omap1510inn arm arm925t 0610a16 2013-09-23 Kshitij Gupta <kshitij@ti.com> @@ -103,3 +104,4 @@ CPCI440 powerpc 440GP b568fd2 2007-12-27 Matthias Fuc PCIPPC2 powerpc MPC740/MPC750 7c9e89b 2013-02-07 Wolfgang Denk <wd@denx.de> PCIPPC6 powerpc MPC740/MPC750 - - Wolfgang Denk <wd@denx.de> omap2420h4 arm omap24xx - 2013-06-04 Richard Woodruff <r-woodruff2@ti.com> +eNET x86 x86 7e8c53d 2013-02-14 Graeme Russ <graeme.russ@gmail.com> diff --git a/drivers/Makefile b/drivers/Makefile index 9cec2ba6fe..5d03f37a18 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -1,8 +1,8 @@ -obj-y += bios_emulator/ +obj-$(CONFIG_BIOSEMU) += bios_emulator/ obj-y += block/ obj-$(CONFIG_BOOTCOUNT_LIMIT) += bootcount/ obj-y += crypto/ -obj-y += fpga/ +obj-$(CONFIG_FPGA) += fpga/ obj-y += hwmon/ obj-y += misc/ obj-y += pcmcia/ @@ -13,3 +13,4 @@ obj-y += tpm/ obj-y += twserial/ obj-y += video/ obj-y += watchdog/ +obj-$(CONFIG_QE) += qe/ diff --git a/drivers/bios_emulator/Makefile b/drivers/bios_emulator/Makefile index dd42e0f766..52a2ceb475 100644 --- a/drivers/bios_emulator/Makefile +++ b/drivers/bios_emulator/Makefile @@ -1,8 +1,6 @@ X86DIR = x86emu -$(shell mkdir -p $(obj)$(X86DIR)) - -obj-$(CONFIG_BIOSEMU) = atibios.o biosemu.o besys.o bios.o \ +obj-y = atibios.o biosemu.o besys.o bios.o \ $(X86DIR)/decode.o \ $(X86DIR)/ops2.o \ $(X86DIR)/ops.o \ @@ -10,9 +8,8 @@ obj-$(CONFIG_BIOSEMU) = atibios.o biosemu.o besys.o bios.o \ $(X86DIR)/sys.o \ $(X86DIR)/debug.o -EXTRA_CFLAGS += -I. -I./include -I$(TOPDIR)/include \ +EXTRA_CFLAGS += -I. -I./include \ -D__PPC__ -D__BIG_ENDIAN__ CFLAGS += $(EXTRA_CFLAGS) -HOSTCFLAGS += $(EXTRA_CFLAGS) CPPFLAGS += $(EXTRA_CFLAGS) diff --git a/drivers/ddr/fsl/Makefile b/drivers/ddr/fsl/Makefile new file mode 100644 index 0000000000..265204f311 --- /dev/null +++ b/drivers/ddr/fsl/Makefile @@ -0,0 +1,34 @@ +# +# Copyright 2008-2011 Freescale Semiconductor, Inc. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License +# Version 2 as published by the Free Software Foundation. +# + +obj-$(CONFIG_SYS_FSL_DDR1) += main.o util.o ctrl_regs.o options.o \ + lc_common_dimm_params.o + +obj-$(CONFIG_SYS_FSL_DDR2) += main.o util.o ctrl_regs.o options.o \ + lc_common_dimm_params.o + +obj-$(CONFIG_SYS_FSL_DDR3) += main.o util.o ctrl_regs.o options.o \ + lc_common_dimm_params.o +ifdef CONFIG_DDR_SPD +SPD := y +endif +ifdef CONFIG_SPD_EEPROM +SPD := y +endif +ifdef SPD +obj-$(CONFIG_SYS_FSL_DDR1) += ddr1_dimm_params.o +obj-$(CONFIG_SYS_FSL_DDR2) += ddr2_dimm_params.o +obj-$(CONFIG_SYS_FSL_DDR3) += ddr3_dimm_params.o +endif + +obj-$(CONFIG_FSL_DDR_INTERACTIVE) += interactive.o +obj-$(CONFIG_SYS_FSL_DDRC_GEN1) += mpc85xx_ddr_gen1.o +obj-$(CONFIG_SYS_FSL_DDRC_GEN2) += mpc85xx_ddr_gen2.o +obj-$(CONFIG_SYS_FSL_DDRC_GEN3) += mpc85xx_ddr_gen3.o +obj-$(CONFIG_SYS_FSL_DDR_86XX) += mpc86xx_ddr.o +obj-$(CONFIG_SYS_FSL_DDRC_ARM_GEN3) += arm_ddr_gen3.o diff --git a/drivers/ddr/fsl/arm_ddr_gen3.c b/drivers/ddr/fsl/arm_ddr_gen3.c new file mode 100644 index 0000000000..bf113908fd --- /dev/null +++ b/drivers/ddr/fsl/arm_ddr_gen3.c @@ -0,0 +1,213 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Derived from mpc85xx_ddr_gen3.c, removed all workarounds + */ + +#include <common.h> +#include <asm/io.h> +#include <fsl_ddr_sdram.h> +#include <asm/processor.h> +#include <fsl_immap.h> + +#if (CONFIG_CHIP_SELECTS_PER_CTRL > 4) +#error Invalid setting for CONFIG_CHIP_SELECTS_PER_CTRL +#endif + + +/* + * regs has the to-be-set values for DDR controller registers + * ctrl_num is the DDR controller number + * step: 0 goes through the initialization in one pass + * 1 sets registers and returns before enabling controller + * 2 resumes from step 1 and continues to initialize + * Dividing the initialization to two steps to deassert DDR reset signal + * to comply with JEDEC specs for RDIMMs. + */ +void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, + unsigned int ctrl_num, int step) +{ + unsigned int i, bus_width; + struct ccsr_ddr __iomem *ddr; + u32 temp_sdram_cfg; + u32 total_gb_size_per_controller; + int timeout; + + switch (ctrl_num) { + case 0: + ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR; + break; +#if defined(CONFIG_SYS_FSL_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1) + case 1: + ddr = (void *)CONFIG_SYS_FSL_DDR2_ADDR; + break; +#endif +#if defined(CONFIG_SYS_FSL_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2) + case 2: + ddr = (void *)CONFIG_SYS_FSL_DDR3_ADDR; + break; +#endif +#if defined(CONFIG_SYS_FSL_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3) + case 3: + ddr = (void *)CONFIG_SYS_FSL_DDR4_ADDR; + break; +#endif + default: + printf("%s unexpected ctrl_num = %u\n", __func__, ctrl_num); + return; + } + + if (step == 2) + goto step2; + + if (regs->ddr_eor) + out_be32(&ddr->eor, regs->ddr_eor); + for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { + if (i == 0) { + out_be32(&ddr->cs0_bnds, regs->cs[i].bnds); + out_be32(&ddr->cs0_config, regs->cs[i].config); + out_be32(&ddr->cs0_config_2, regs->cs[i].config_2); + + } else if (i == 1) { + out_be32(&ddr->cs1_bnds, regs->cs[i].bnds); + out_be32(&ddr->cs1_config, regs->cs[i].config); + out_be32(&ddr->cs1_config_2, regs->cs[i].config_2); + + } else if (i == 2) { + out_be32(&ddr->cs2_bnds, regs->cs[i].bnds); + out_be32(&ddr->cs2_config, regs->cs[i].config); + out_be32(&ddr->cs2_config_2, regs->cs[i].config_2); + + } else if (i == 3) { + out_be32(&ddr->cs3_bnds, regs->cs[i].bnds); + out_be32(&ddr->cs3_config, regs->cs[i].config); + out_be32(&ddr->cs3_config_2, regs->cs[i].config_2); + } + } + + out_be32(&ddr->timing_cfg_3, regs->timing_cfg_3); + out_be32(&ddr->timing_cfg_0, regs->timing_cfg_0); + out_be32(&ddr->timing_cfg_1, regs->timing_cfg_1); + out_be32(&ddr->timing_cfg_2, regs->timing_cfg_2); + out_be32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2); + out_be32(&ddr->sdram_mode, regs->ddr_sdram_mode); + out_be32(&ddr->sdram_mode_2, regs->ddr_sdram_mode_2); + out_be32(&ddr->sdram_mode_3, regs->ddr_sdram_mode_3); + out_be32(&ddr->sdram_mode_4, regs->ddr_sdram_mode_4); + out_be32(&ddr->sdram_mode_5, regs->ddr_sdram_mode_5); + out_be32(&ddr->sdram_mode_6, regs->ddr_sdram_mode_6); + out_be32(&ddr->sdram_mode_7, regs->ddr_sdram_mode_7); + out_be32(&ddr->sdram_mode_8, regs->ddr_sdram_mode_8); + out_be32(&ddr->sdram_md_cntl, regs->ddr_sdram_md_cntl); + out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval); + out_be32(&ddr->sdram_data_init, regs->ddr_data_init); + out_be32(&ddr->sdram_clk_cntl, regs->ddr_sdram_clk_cntl); + out_be32(&ddr->init_addr, regs->ddr_init_addr); + out_be32(&ddr->init_ext_addr, regs->ddr_init_ext_addr); + + out_be32(&ddr->timing_cfg_4, regs->timing_cfg_4); + out_be32(&ddr->timing_cfg_5, regs->timing_cfg_5); + out_be32(&ddr->ddr_zq_cntl, regs->ddr_zq_cntl); + out_be32(&ddr->ddr_wrlvl_cntl, regs->ddr_wrlvl_cntl); +#ifndef CONFIG_SYS_FSL_DDR_EMU + /* + * Skip these two registers if running on emulator + * because emulator doesn't have skew between bytes. + */ + + if (regs->ddr_wrlvl_cntl_2) + out_be32(&ddr->ddr_wrlvl_cntl_2, regs->ddr_wrlvl_cntl_2); + if (regs->ddr_wrlvl_cntl_3) + out_be32(&ddr->ddr_wrlvl_cntl_3, regs->ddr_wrlvl_cntl_3); +#endif + + out_be32(&ddr->ddr_sr_cntr, regs->ddr_sr_cntr); + out_be32(&ddr->ddr_sdram_rcw_1, regs->ddr_sdram_rcw_1); + out_be32(&ddr->ddr_sdram_rcw_2, regs->ddr_sdram_rcw_2); + out_be32(&ddr->ddr_cdr1, regs->ddr_cdr1); + out_be32(&ddr->ddr_cdr2, regs->ddr_cdr2); + out_be32(&ddr->err_disable, regs->err_disable); + out_be32(&ddr->err_int_en, regs->err_int_en); + for (i = 0; i < 32; i++) { + if (regs->debug[i]) { + debug("Write to debug_%d as %08x\n", i + 1, + regs->debug[i]); + out_be32(&ddr->debug[i], regs->debug[i]); + } + } + + /* + * For RDIMMs, JEDEC spec requires clocks to be stable before reset is + * deasserted. Clocks start when any chip select is enabled and clock + * control register is set. Because all DDR components are connected to + * one reset signal, this needs to be done in two steps. Step 1 is to + * get the clocks started. Step 2 resumes after reset signal is + * deasserted. + */ + if (step == 1) { + udelay(200); + return; + } + +step2: + /* Set, but do not enable the memory */ + temp_sdram_cfg = regs->ddr_sdram_cfg; + temp_sdram_cfg &= ~(SDRAM_CFG_MEM_EN); + out_be32(&ddr->sdram_cfg, temp_sdram_cfg); + + /* + * 500 painful micro-seconds must elapse between + * the DDR clock setup and the DDR config enable. + * DDR2 need 200 us, and DDR3 need 500 us from spec, + * we choose the max, that is 500 us for all of case. + */ + udelay(500); + asm volatile("dsb sy;isb"); + + /* Let the controller go */ + temp_sdram_cfg = in_be32(&ddr->sdram_cfg) & ~SDRAM_CFG_BI; + out_be32(&ddr->sdram_cfg, temp_sdram_cfg | SDRAM_CFG_MEM_EN); + asm volatile("dsb sy;isb"); + + total_gb_size_per_controller = 0; + for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { + if (!(regs->cs[i].config & 0x80000000)) + continue; + total_gb_size_per_controller += 1 << ( + ((regs->cs[i].config >> 14) & 0x3) + 2 + + ((regs->cs[i].config >> 8) & 0x7) + 12 + + ((regs->cs[i].config >> 0) & 0x7) + 8 + + 3 - ((regs->ddr_sdram_cfg >> 19) & 0x3) - + 26); /* minus 26 (count of 64M) */ + } + if (regs->cs[0].config & 0x20000000) { + /* 2-way interleaving */ + total_gb_size_per_controller <<= 1; + } + /* + * total memory / bus width = transactions needed + * transactions needed / data rate = seconds + * to add plenty of buffer, double the time + * For example, 2GB on 666MT/s 64-bit bus takes about 402ms + * Let's wait for 800ms + */ + bus_width = 3 - ((ddr->sdram_cfg & SDRAM_CFG_DBW_MASK) + >> SDRAM_CFG_DBW_SHIFT); + timeout = ((total_gb_size_per_controller << (6 - bus_width)) * 100 / + (get_ddr_freq(0) >> 20)) << 1; + total_gb_size_per_controller >>= 4; /* shift down to gb size */ + debug("total %d GB\n", total_gb_size_per_controller); + debug("Need to wait up to %d * 10ms\n", timeout); + + /* Poll DDR_SDRAM_CFG_2[D_INIT] bit until auto-data init is done. */ + while ((in_be32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT) && + (timeout >= 0)) { + udelay(10000); /* throttle polling rate */ + timeout--; + } + + if (timeout <= 0) + printf("Waiting for D_INIT timeout. Memory may not work.\n"); +} diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c b/drivers/ddr/fsl/ctrl_regs.c index dcfc48aa95..6bf22cfbd6 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c +++ b/drivers/ddr/fsl/ctrl_regs.c @@ -11,15 +11,17 @@ */ #include <common.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> -#include "ddr.h" +#include <fsl_ddr.h> +#include <fsl_immap.h> +#include <asm/io.h> -#define _DDR_ADDR CONFIG_SYS_MPC8xxx_DDR_ADDR +#define _DDR_ADDR CONFIG_SYS_FSL_DDR_ADDR static u32 fsl_ddr_get_version(void) { - ccsr_ddr_t *ddr; + struct ccsr_ddr __iomem *ddr; u32 ver_major_minor_errata; ddr = (void *)_DDR_ADDR; @@ -68,9 +70,9 @@ static inline int fsl_ddr_get_rtt(void) { int rtt; -#if defined(CONFIG_FSL_DDR1) +#if defined(CONFIG_SYS_FSL_DDR1) rtt = 0; -#elif defined(CONFIG_FSL_DDR2) +#elif defined(CONFIG_SYS_FSL_DDR2) rtt = 3; #else rtt = 0; @@ -217,7 +219,7 @@ static void set_csn_config_2(int i, fsl_ddr_cfg_regs_t *ddr) /* -3E = 667 CL5, -25 = CL6 800, -25E = CL5 800 */ -#if !defined(CONFIG_FSL_DDR1) +#if !defined(CONFIG_SYS_FSL_DDR1) static inline int avoid_odt_overlap(const dimm_params_t *dimm_params) { #if CONFIG_DIMM_SLOTS_PER_CTLR == 1 @@ -263,7 +265,7 @@ static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr, /* Mode register set cycle time (tMRD). */ unsigned char tmrd_mclk; -#ifdef CONFIG_FSL_DDR3 +#ifdef CONFIG_SYS_FSL_DDR3 /* * (tXARD and tXARDS). Empirical? * The DDR3 spec has not tXARD, @@ -302,7 +304,7 @@ static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr, pre_pd_exit_mclk = act_pd_exit_mclk; taxpd_mclk = 1; } -#else /* CONFIG_FSL_DDR2 */ +#else /* CONFIG_SYS_FSL_DDR2 */ /* * (tXARD and tXARDS). Empirical? * tXARD = 2 for DDR2 @@ -323,20 +325,21 @@ static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr, | ((twrt_mclk & 0x3) << 28) /* WRT */ | ((trrt_mclk & 0x3) << 26) /* RRT */ | ((twwt_mclk & 0x3) << 24) /* WWT */ - | ((act_pd_exit_mclk & 0x7) << 20) /* ACT_PD_EXIT */ + | ((act_pd_exit_mclk & 0xf) << 20) /* ACT_PD_EXIT */ | ((pre_pd_exit_mclk & 0xF) << 16) /* PRE_PD_EXIT */ | ((taxpd_mclk & 0xf) << 8) /* ODT_PD_EXIT */ - | ((tmrd_mclk & 0xf) << 0) /* MRS_CYC */ + | ((tmrd_mclk & 0x1f) << 0) /* MRS_CYC */ ); debug("FSLDDR: timing_cfg_0 = 0x%08x\n", ddr->timing_cfg_0); } -#endif /* defined(CONFIG_FSL_DDR2) */ +#endif /* defined(CONFIG_SYS_FSL_DDR2) */ /* DDR SDRAM Timing Configuration 3 (TIMING_CFG_3) */ static void set_timing_cfg_3(fsl_ddr_cfg_regs_t *ddr, const memctl_options_t *popts, const common_timing_params_t *common_dimm, - unsigned int cas_latency) + unsigned int cas_latency, + unsigned int additive_latency) { /* Extended precharge to activate interval (tRP) */ unsigned int ext_pretoact = 0; @@ -348,6 +351,8 @@ static void set_timing_cfg_3(fsl_ddr_cfg_regs_t *ddr, unsigned int ext_refrec; /* Extended MCAS latency from READ cmd */ unsigned int ext_caslat = 0; + /* Extended additive latency */ + unsigned int ext_add_lat = 0; /* Extended last data to precharge interval (tWR) */ unsigned int ext_wrrec = 0; /* Control Adjust */ @@ -357,6 +362,7 @@ static void set_timing_cfg_3(fsl_ddr_cfg_regs_t *ddr, ext_acttopre = picos_to_mclk(common_dimm->tras_ps) >> 4; ext_acttorw = picos_to_mclk(common_dimm->trcd_ps) >> 4; ext_caslat = (2 * cas_latency - 1) >> 4; + ext_add_lat = additive_latency >> 4; ext_refrec = (picos_to_mclk(common_dimm->trfc_ps) - 8) >> 4; /* ext_wrrec only deals with 16 clock and above, or 14 with OTF */ ext_wrrec = (picos_to_mclk(common_dimm->twr_ps) + @@ -368,6 +374,7 @@ static void set_timing_cfg_3(fsl_ddr_cfg_regs_t *ddr, | ((ext_acttorw & 0x1) << 22) | ((ext_refrec & 0x1F) << 16) | ((ext_caslat & 0x3) << 12) + | ((ext_add_lat & 0x1) << 10) | ((ext_wrrec & 0x1) << 8) | ((cntl_adj & 0x7) << 0) ); @@ -420,9 +427,9 @@ static void set_timing_cfg_1(fsl_ddr_cfg_regs_t *ddr, * 4.5 1000 * 5.0 5 1001 */ -#if defined(CONFIG_FSL_DDR1) +#if defined(CONFIG_SYS_FSL_DDR1) caslat_ctrl = (cas_latency + 1) & 0x07; -#elif defined(CONFIG_FSL_DDR2) +#elif defined(CONFIG_SYS_FSL_DDR2) caslat_ctrl = 2 * cas_latency - 1; #else /* @@ -447,7 +454,7 @@ static void set_timing_cfg_1(fsl_ddr_cfg_regs_t *ddr, /* * JEDEC has min requirement for tRRD */ -#if defined(CONFIG_FSL_DDR3) +#if defined(CONFIG_SYS_FSL_DDR3) if (acttoact_mclk < 4) acttoact_mclk = 4; #endif @@ -455,10 +462,10 @@ static void set_timing_cfg_1(fsl_ddr_cfg_regs_t *ddr, /* * JEDEC has some min requirements for tWTR */ -#if defined(CONFIG_FSL_DDR2) +#if defined(CONFIG_SYS_FSL_DDR2) if (wrtord_mclk < 2) wrtord_mclk = 2; -#elif defined(CONFIG_FSL_DDR3) +#elif defined(CONFIG_SYS_FSL_DDR3) if (wrtord_mclk < 4) wrtord_mclk = 4; #endif @@ -504,7 +511,7 @@ static void set_timing_cfg_2(fsl_ddr_cfg_regs_t *ddr, add_lat_mclk = additive_latency; cpo = popts->cpo_override; -#if defined(CONFIG_FSL_DDR1) +#if defined(CONFIG_SYS_FSL_DDR1) /* * This is a lie. It should really be 1, but if it is * set to 1, bits overlap into the old controller's @@ -512,7 +519,7 @@ static void set_timing_cfg_2(fsl_ddr_cfg_regs_t *ddr, * the HW will magically treat it as 1 for DDR 1. Oh Yea. */ wr_lat = 0; -#elif defined(CONFIG_FSL_DDR2) +#elif defined(CONFIG_SYS_FSL_DDR2) wr_lat = cas_latency - 1; #else wr_lat = compute_cas_write_latency(); @@ -522,15 +529,13 @@ static void set_timing_cfg_2(fsl_ddr_cfg_regs_t *ddr, /* * JEDEC has some min requirements for tRTP */ -#if defined(CONFIG_FSL_DDR2) +#if defined(CONFIG_SYS_FSL_DDR2) if (rd_to_pre < 2) rd_to_pre = 2; -#elif defined(CONFIG_FSL_DDR3) +#elif defined(CONFIG_SYS_FSL_DDR3) if (rd_to_pre < 4) rd_to_pre = 4; #endif - if (additive_latency) - rd_to_pre += additive_latency; if (popts->otf_burst_chop_en) rd_to_pre += 2; /* according to UM */ @@ -709,7 +714,7 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr, * * ({EXT_REFREC || REFREC} + 8 + 2)]} * << DDR_SDRAM_INTERVAL[REFINT] */ -#if defined(CONFIG_FSL_DDR3) +#if defined(CONFIG_SYS_FSL_DDR3) obc_cfg = popts->otf_burst_chop_en; #else obc_cfg = 0; @@ -738,7 +743,7 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr, d_init = 0; #endif -#if defined(CONFIG_FSL_DDR3) +#if defined(CONFIG_SYS_FSL_DDR3) md_en = popts->mirrored_dimm; #endif qd_en = popts->quad_rank_present ? 1 : 0; @@ -771,7 +776,7 @@ static void set_ddr_sdram_mode_2(fsl_ddr_cfg_regs_t *ddr, unsigned short esdmode2 = 0; /* Extended SDRAM mode 2 */ unsigned short esdmode3 = 0; /* Extended SDRAM mode 3 */ -#if defined(CONFIG_FSL_DDR3) +#if defined(CONFIG_SYS_FSL_DDR3) int i; unsigned int rtt_wr = 0; /* Rtt_WR - dynamic ODT off */ unsigned int srt = 0; /* self-refresh temerature, normal range */ @@ -800,7 +805,7 @@ static void set_ddr_sdram_mode_2(fsl_ddr_cfg_regs_t *ddr, ); debug("FSLDDR: ddr_sdram_mode_2 = 0x%08x\n", ddr->ddr_sdram_mode_2); -#ifdef CONFIG_FSL_DDR3 +#ifdef CONFIG_SYS_FSL_DDR3 if (unq_mrs_en) { /* unique mode registers are supported */ for (i = 1; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { if (popts->rtt_override) @@ -861,7 +866,7 @@ static void set_ddr_sdram_interval(fsl_ddr_cfg_regs_t *ddr, debug("FSLDDR: ddr_sdram_interval = 0x%08x\n", ddr->ddr_sdram_interval); } -#if defined(CONFIG_FSL_DDR3) +#if defined(CONFIG_SYS_FSL_DDR3) /* DDR SDRAM Mode configuration set (DDR_SDRAM_MODE) */ static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr, const memctl_options_t *popts, @@ -1057,7 +1062,7 @@ static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr, } } -#else /* !CONFIG_FSL_DDR3 */ +#else /* !CONFIG_SYS_FSL_DDR3 */ /* DDR SDRAM Mode configuration set (DDR_SDRAM_MODE) */ static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr, @@ -1103,7 +1108,7 @@ static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr, unsigned int bt; unsigned int bl; /* BL: Burst Length */ -#if defined(CONFIG_FSL_DDR2) +#if defined(CONFIG_SYS_FSL_DDR2) const unsigned int mclk_ps = get_memory_clk_period_ps(); #endif dqs_en = !popts->dqs_config; @@ -1132,15 +1137,15 @@ static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr, */ pd = 0; -#if defined(CONFIG_FSL_DDR1) +#if defined(CONFIG_SYS_FSL_DDR1) wr = 0; /* Historical */ -#elif defined(CONFIG_FSL_DDR2) +#elif defined(CONFIG_SYS_FSL_DDR2) wr = (common_dimm->twr_ps + mclk_ps - 1) / mclk_ps - 1; #endif dll_res = 0; mode = 0; -#if defined(CONFIG_FSL_DDR1) +#if defined(CONFIG_SYS_FSL_DDR1) if (1 <= cas_latency && cas_latency <= 4) { unsigned char mode_caslat_table[4] = { 0x5, /* 1.5 clocks */ @@ -1152,7 +1157,7 @@ static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr, } else { printf("Warning: unknown cas_latency %d\n", cas_latency); } -#elif defined(CONFIG_FSL_DDR2) +#elif defined(CONFIG_SYS_FSL_DDR2) caslat = cas_latency; #endif bt = 0; @@ -1249,7 +1254,7 @@ static void set_timing_cfg_4(fsl_ddr_cfg_regs_t *ddr, unsigned int wwt = 0; /* Write-to-write turnaround for same CS */ unsigned int dll_lock = 0; /* DDR SDRAM DLL Lock Time */ -#if defined(CONFIG_FSL_DDR3) +#if defined(CONFIG_SYS_FSL_DDR3) if (popts->burst_length == DDR_BL8) { /* We set BL/2 for fixed BL8 */ rrt = 0; /* BL/2 clocks */ @@ -1279,7 +1284,7 @@ static void set_timing_cfg_5(fsl_ddr_cfg_regs_t *ddr, unsigned int cas_latency) unsigned int wodt_on = 0; /* Write to ODT on */ unsigned int wodt_off = 0; /* Write to ODT off */ -#if defined(CONFIG_FSL_DDR3) +#if defined(CONFIG_SYS_FSL_DDR3) /* rodt_on = timing_cfg_1[caslat] - timing_cfg_2[wrlat] + 1 */ rodt_on = cas_latency - ((ddr->timing_cfg_2 & 0x00780000) >> 19) + 1; rodt_off = 4; /* 4 clocks */ @@ -1590,8 +1595,8 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts, if (cs_en) { ddr->cs[i].bnds = (0 - | ((sa & 0xFFF) << 16)/* starting address MSB */ - | ((ea & 0xFFF) << 0) /* ending address MSB */ + | ((sa & 0xffff) << 16) /* starting address */ + | ((ea & 0xffff) << 0) /* ending address */ ); } else { /* setting bnds to 0xffffffff for inactive CS */ @@ -1612,11 +1617,12 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts, set_ddr_eor(ddr, popts); -#if !defined(CONFIG_FSL_DDR1) +#if !defined(CONFIG_SYS_FSL_DDR1) set_timing_cfg_0(ddr, popts, dimm_params); #endif - set_timing_cfg_3(ddr, popts, common_dimm, cas_latency); + set_timing_cfg_3(ddr, popts, common_dimm, cas_latency, + additive_latency); set_timing_cfg_1(ddr, popts, common_dimm, cas_latency); set_timing_cfg_2(ddr, popts, common_dimm, cas_latency, additive_latency); diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ddr1_dimm_params.c b/drivers/ddr/fsl/ddr1_dimm_params.c index f137fcee34..7df27b90b7 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/ddr1_dimm_params.c +++ b/drivers/ddr/fsl/ddr1_dimm_params.c @@ -7,9 +7,9 @@ */ #include <common.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> -#include "ddr.h" +#include <fsl_ddr.h> /* * Calculate the Density of each Physical Rank. diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ddr2_dimm_params.c b/drivers/ddr/fsl/ddr2_dimm_params.c index e4d02e8f61..d865df78a8 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/ddr2_dimm_params.c +++ b/drivers/ddr/fsl/ddr2_dimm_params.c @@ -7,9 +7,9 @@ */ #include <common.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> -#include "ddr.h" +#include <fsl_ddr.h> /* * Calculate the Density of each Physical Rank. * Returned size is in bytes. diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c b/drivers/ddr/fsl/ddr3_dimm_params.c index 4c8645da56..a4b8c101f5 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c +++ b/drivers/ddr/fsl/ddr3_dimm_params.c @@ -12,9 +12,9 @@ */ #include <common.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> -#include "ddr.h" +#include <fsl_ddr.h> /* * Calculate the Density of each Physical Rank. diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c b/drivers/ddr/fsl/interactive.c index 3b661129cb..ebf3ed6f38 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c +++ b/drivers/ddr/fsl/interactive.c @@ -14,9 +14,10 @@ #include <common.h> #include <linux/ctype.h> #include <asm/types.h> +#include <asm/io.h> -#include <asm/fsl_ddr_sdram.h> -#include "ddr.h" +#include <fsl_ddr_sdram.h> +#include <fsl_ddr.h> /* Option parameter Structures */ struct options_string { @@ -402,7 +403,7 @@ static void fsl_ddr_options_edit(fsl_ddr_info_t *pinfo, CTRL_OPTIONS_CS(3, odt_rd_cfg), CTRL_OPTIONS_CS(3, odt_wr_cfg), #endif -#if defined(CONFIG_FSL_DDR3) +#if defined(CONFIG_SYS_FSL_DDR3) CTRL_OPTIONS_CS(0, odt_rtt_norm), CTRL_OPTIONS_CS(0, odt_rtt_wr), #if (CONFIG_CHIP_SELECTS_PER_CTRL > 1) @@ -647,7 +648,7 @@ static void print_memctl_options(const memctl_options_t *popts) CTRL_OPTIONS_CS(3, odt_rd_cfg), CTRL_OPTIONS_CS(3, odt_wr_cfg), #endif -#if defined(CONFIG_FSL_DDR3) +#if defined(CONFIG_SYS_FSL_DDR3) CTRL_OPTIONS_CS(0, odt_rtt_norm), CTRL_OPTIONS_CS(0, odt_rtt_wr), #if (CONFIG_CHIP_SELECTS_PER_CTRL > 1) @@ -710,7 +711,7 @@ static void print_memctl_options(const memctl_options_t *popts) print_option_table(options, n_opts, popts); } -#ifdef CONFIG_FSL_DDR1 +#ifdef CONFIG_SYS_FSL_DDR1 void ddr1_spd_dump(const ddr1_spd_eeprom_t *spd) { unsigned int i; @@ -859,7 +860,7 @@ void ddr1_spd_dump(const ddr1_spd_eeprom_t *spd) } #endif -#ifdef CONFIG_FSL_DDR2 +#ifdef CONFIG_SYS_FSL_DDR2 void ddr2_spd_dump(const ddr2_spd_eeprom_t *spd) { unsigned int i; @@ -1051,7 +1052,7 @@ void ddr2_spd_dump(const ddr2_spd_eeprom_t *spd) } #endif -#ifdef CONFIG_FSL_DDR3 +#ifdef CONFIG_SYS_FSL_DDR3 void ddr3_spd_dump(const ddr3_spd_eeprom_t *spd) { unsigned int i; @@ -1246,11 +1247,11 @@ void ddr3_spd_dump(const ddr3_spd_eeprom_t *spd) static inline void generic_spd_dump(const generic_spd_eeprom_t *spd) { -#if defined(CONFIG_FSL_DDR1) +#if defined(CONFIG_SYS_FSL_DDR1) ddr1_spd_dump(spd); -#elif defined(CONFIG_FSL_DDR2) +#elif defined(CONFIG_SYS_FSL_DDR2) ddr2_spd_dump(spd); -#elif defined(CONFIG_FSL_DDR3) +#elif defined(CONFIG_SYS_FSL_DDR3) ddr3_spd_dump(spd); #endif } diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c b/drivers/ddr/fsl/lc_common_dimm_params.c index 332fe25c48..610318ad1e 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c +++ b/drivers/ddr/fsl/lc_common_dimm_params.c @@ -7,11 +7,11 @@ */ #include <common.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> -#include "ddr.h" +#include <fsl_ddr.h> -#if defined(CONFIG_FSL_DDR3) +#if defined(CONFIG_SYS_FSL_DDR3) static unsigned int compute_cas_latency_ddr3(const dimm_params_t *dimm_params, common_timing_params_t *outpdimm, @@ -103,7 +103,7 @@ compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params, unsigned int temp1, temp2; unsigned int additive_latency = 0; -#if !defined(CONFIG_FSL_DDR3) +#if !defined(CONFIG_SYS_FSL_DDR3) const unsigned int mclk_ps = get_memory_clk_period_ps(); unsigned int lowest_good_caslat; unsigned int not_ok; @@ -265,7 +265,7 @@ compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params, if (temp1 != 0) printf("ERROR: Mix different RDIMM detected!\n"); -#if defined(CONFIG_FSL_DDR3) +#if defined(CONFIG_SYS_FSL_DDR3) if (compute_cas_latency_ddr3(dimm_params, outpdimm, number_of_dimms)) return 1; #else @@ -386,7 +386,7 @@ compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params, } outpdimm->highest_common_derated_caslat = temp1; debug("highest common dereated CAS latency = %u\n", temp1); -#endif /* #if defined(CONFIG_FSL_DDR3) */ +#endif /* #if defined(CONFIG_SYS_FSL_DDR3) */ /* Determine if all DIMMs ECC capable. */ temp1 = 1; @@ -404,7 +404,7 @@ compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params, } outpdimm->all_dimms_ecc_capable = temp1; -#ifndef CONFIG_FSL_DDR3 +#ifndef CONFIG_SYS_FSL_DDR3 /* FIXME: move to somewhere else to validate. */ if (mclk_ps > tckmax_max_ps) { printf("Warning: some of the installed DIMMs " @@ -467,7 +467,7 @@ compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params, additive_latency = 0; -#if defined(CONFIG_FSL_DDR2) +#if defined(CONFIG_SYS_FSL_DDR2) if (lowest_good_caslat < 4) { additive_latency = (picos_to_mclk(trcd_ps) > lowest_good_caslat) ? picos_to_mclk(trcd_ps) - lowest_good_caslat : 0; @@ -478,7 +478,7 @@ compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params, } } -#elif defined(CONFIG_FSL_DDR3) +#elif defined(CONFIG_SYS_FSL_DDR3) /* * The system will not use the global auto-precharge mode. * However, it uses the page mode, so we set AL=0 diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/main.c b/drivers/ddr/fsl/main.c index 34d8bc3ac0..d0cd58925c 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/main.c +++ b/drivers/ddr/fsl/main.c @@ -14,17 +14,19 @@ #include <common.h> #include <i2c.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_law.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr.h> -#include "ddr.h" +#ifdef CONFIG_PPC +#include <asm/fsl_law.h> void fsl_ddr_set_lawbar( const common_timing_params_t *memctl_common_params, unsigned int memctl_interleaved, unsigned int ctrl_num); -void fsl_ddr_set_intl3r(const unsigned int granule_size); +#endif +void fsl_ddr_set_intl3r(const unsigned int granule_size); #if defined(SPD_EEPROM_ADDRESS) || \ defined(SPD_EEPROM_ADDRESS1) || defined(SPD_EEPROM_ADDRESS2) || \ defined(SPD_EEPROM_ADDRESS3) || defined(SPD_EEPROM_ADDRESS4) @@ -253,7 +255,7 @@ static unsigned long long __step_assign_addresses(fsl_ddr_info_t *pinfo, debug("dbw_cap_adj[%d]=%d\n", i, dbw_cap_adj[i]); } - current_mem_base = 0ull; + current_mem_base = CONFIG_SYS_DDR_SDRAM_BASE; total_mem = 0; if (pinfo->memctl_opts[0].memctl_interleaving) { rank_density = pinfo->dimm_params[0][0].rank_density >> @@ -533,8 +535,8 @@ fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step, } } - total_mem = 1 + (((unsigned long long)max_end << 24ULL) - | 0xFFFFFFULL); + total_mem = 1 + (((unsigned long long)max_end << 24ULL) | + 0xFFFFFFULL) - CONFIG_SYS_DDR_SDRAM_BASE; } return total_mem; @@ -549,7 +551,9 @@ fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step, phys_size_t fsl_ddr_sdram(void) { unsigned int i; +#ifdef CONFIG_PPC unsigned int law_memctl = LAW_TRGT_IF_DDR_1; +#endif unsigned long long total_memory; fsl_ddr_info_t info; int deassert_reset; @@ -621,6 +625,7 @@ phys_size_t fsl_ddr_sdram(void) } } +#ifdef CONFIG_PPC /* program LAWs */ for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) { if (info.memctl_opts[i].memctl_interleaving) { @@ -681,6 +686,7 @@ phys_size_t fsl_ddr_sdram(void) law_memctl, i); } } +#endif debug("total_memory by %s = %llu\n", __func__, total_memory); diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen1.c b/drivers/ddr/fsl/mpc85xx_ddr_gen1.c index 4dd8c0b5bf..8dd4a9136c 100644 --- a/arch/powerpc/cpu/mpc85xx/ddr-gen1.c +++ b/drivers/ddr/fsl/mpc85xx_ddr_gen1.c @@ -8,7 +8,7 @@ #include <common.h> #include <asm/io.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #if (CONFIG_CHIP_SELECTS_PER_CTRL > 4) #error Invalid setting for CONFIG_CHIP_SELECTS_PER_CTRL @@ -18,7 +18,8 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, unsigned int ctrl_num, int step) { unsigned int i; - volatile ccsr_ddr_t *ddr = (void *)CONFIG_SYS_MPC8xxx_DDR_ADDR; + struct ccsr_ddr __iomem *ddr = + (struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DDR_ADDR; if (ctrl_num != 0) { printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num); @@ -73,7 +74,8 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, void ddr_enable_ecc(unsigned int dram_size) { - volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC8xxx_DDR_ADDR); + struct ccsr_ddr __iomem *ddr = + (struct ccsr_ddr __iomem *)(CONFIG_SYS_FSL_DDR_ADDR); dma_meminit(CONFIG_MEM_INIT_VALUE, dram_size); diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen2.c b/drivers/ddr/fsl/mpc85xx_ddr_gen2.c index 542bc84acf..988b4a4941 100644 --- a/arch/powerpc/cpu/mpc85xx/ddr-gen2.c +++ b/drivers/ddr/fsl/mpc85xx_ddr_gen2.c @@ -9,7 +9,7 @@ #include <common.h> #include <asm/io.h> #include <asm/processor.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #if (CONFIG_CHIP_SELECTS_PER_CTRL > 4) #error Invalid setting for CONFIG_CHIP_SELECTS_PER_CTRL @@ -19,7 +19,8 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, unsigned int ctrl_num, int step) { unsigned int i; - ccsr_ddr_t *ddr = (void *)CONFIG_SYS_MPC8xxx_DDR_ADDR; + struct ccsr_ddr __iomem *ddr = + (struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DDR_ADDR; #if defined(CONFIG_SYS_FSL_ERRATUM_NMG_DDR120) && defined(CONFIG_MPC85xx) ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c b/drivers/ddr/fsl/mpc85xx_ddr_gen3.c index 1be51d3307..9f04133094 100644 --- a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c +++ b/drivers/ddr/fsl/mpc85xx_ddr_gen3.c @@ -8,7 +8,7 @@ #include <common.h> #include <asm/io.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <asm/processor.h> #if (CONFIG_CHIP_SELECTS_PER_CTRL > 4) @@ -29,7 +29,7 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, unsigned int ctrl_num, int step) { unsigned int i, bus_width; - volatile ccsr_ddr_t *ddr; + struct ccsr_ddr __iomem *ddr; u32 temp_sdram_cfg; u32 total_gb_size_per_controller; int timeout; @@ -42,21 +42,21 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, switch (ctrl_num) { case 0: - ddr = (void *)CONFIG_SYS_MPC8xxx_DDR_ADDR; + ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR; break; -#if defined(CONFIG_SYS_MPC8xxx_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1) +#if defined(CONFIG_SYS_FSL_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1) case 1: - ddr = (void *)CONFIG_SYS_MPC8xxx_DDR2_ADDR; + ddr = (void *)CONFIG_SYS_FSL_DDR2_ADDR; break; #endif -#if defined(CONFIG_SYS_MPC8xxx_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2) +#if defined(CONFIG_SYS_FSL_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2) case 2: - ddr = (void *)CONFIG_SYS_MPC8xxx_DDR3_ADDR; + ddr = (void *)CONFIG_SYS_FSL_DDR3_ADDR; break; #endif -#if defined(CONFIG_SYS_MPC8xxx_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3) +#if defined(CONFIG_SYS_FSL_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3) case 3: - ddr = (void *)CONFIG_SYS_MPC8xxx_DDR4_ADDR; + ddr = (void *)CONFIG_SYS_FSL_DDR4_ADDR; break; #endif default: diff --git a/arch/powerpc/cpu/mpc86xx/ddr-8641.c b/drivers/ddr/fsl/mpc86xx_ddr.c index 33a91f9f78..4551ed87db 100644 --- a/arch/powerpc/cpu/mpc86xx/ddr-8641.c +++ b/drivers/ddr/fsl/mpc86xx_ddr.c @@ -8,7 +8,7 @@ #include <common.h> #include <asm/io.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #if (CONFIG_CHIP_SELECTS_PER_CTRL > 4) #error Invalid setting for CONFIG_CHIP_SELECTS_PER_CTRL @@ -18,14 +18,14 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, unsigned int ctrl_num, int step) { unsigned int i; - volatile ccsr_ddr_t *ddr; + struct ccsr_ddr __iomem *ddr; switch (ctrl_num) { case 0: - ddr = (void *)CONFIG_SYS_MPC8xxx_DDR_ADDR; + ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR; break; case 1: - ddr = (void *)CONFIG_SYS_MPC8xxx_DDR2_ADDR; + ddr = (void *)CONFIG_SYS_FSL_DDR2_ADDR; break; default: printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num); @@ -58,7 +58,7 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, out_be32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2); out_be32(&ddr->sdram_mode, regs->ddr_sdram_mode); out_be32(&ddr->sdram_mode_2, regs->ddr_sdram_mode_2); - out_be32(&ddr->sdram_mode_cntl, regs->ddr_sdram_md_cntl); + out_be32(&ddr->sdram_md_cntl, regs->ddr_sdram_md_cntl); out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval); out_be32(&ddr->sdram_data_init, regs->ddr_data_init); out_be32(&ddr->sdram_clk_cntl, regs->ddr_sdram_clk_cntl); diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/options.c b/drivers/ddr/fsl/options.c index 1297845553..4aafcceaf5 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/options.c +++ b/drivers/ddr/fsl/options.c @@ -6,9 +6,9 @@ #include <common.h> #include <hwconfig.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> -#include "ddr.h" +#include <fsl_ddr.h> /* * Use our own stack based buffer before relocation to allow accessing longer @@ -29,7 +29,7 @@ struct dynamic_odt { unsigned int odt_rtt_wr; }; -#ifdef CONFIG_FSL_DDR3 +#ifdef CONFIG_SYS_FSL_DDR3 static const struct dynamic_odt single_Q[4] = { { /* cs0 */ FSL_DDR_ODT_NEVER, @@ -259,7 +259,7 @@ static const struct dynamic_odt odt_unknown[4] = { DDR3_RTT_OFF } }; -#else /* CONFIG_FSL_DDR3 */ +#else /* CONFIG_SYS_FSL_DDR3 */ static const struct dynamic_odt single_Q[4] = { {0, 0, 0, 0}, {0, 0, 0, 0}, @@ -507,7 +507,7 @@ unsigned int populate_memctl_options(int all_dimms_registered, unsigned int i; char buffer[HWCONFIG_BUFFER_SIZE]; char *buf = NULL; -#if defined(CONFIG_FSL_DDR3) || defined(CONFIG_FSL_DDR2) +#if defined(CONFIG_SYS_FSL_DDR3) || defined(CONFIG_SYS_FSL_DDR2) const struct dynamic_odt *pdodt = odt_unknown; #endif ulong ddr_freq; @@ -519,7 +519,7 @@ unsigned int populate_memctl_options(int all_dimms_registered, if (getenv_f("hwconfig", buffer, sizeof(buffer)) > 0) buf = buffer; -#if defined(CONFIG_FSL_DDR3) || defined(CONFIG_FSL_DDR2) +#if defined(CONFIG_SYS_FSL_DDR3) || defined(CONFIG_SYS_FSL_DDR2) /* Chip select options. */ if (CONFIG_DIMM_SLOTS_PER_CTLR == 1) { switch (pdimm[0].n_ranks) { @@ -585,7 +585,7 @@ unsigned int populate_memctl_options(int all_dimms_registered, /* Pick chip-select local options. */ for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { -#if defined(CONFIG_FSL_DDR3) || defined(CONFIG_FSL_DDR2) +#if defined(CONFIG_SYS_FSL_DDR3) || defined(CONFIG_SYS_FSL_DDR2) popts->cs_local_opts[i].odt_rd_cfg = pdodt[i].odt_rd_cfg; popts->cs_local_opts[i].odt_wr_cfg = pdodt[i].odt_wr_cfg; popts->cs_local_opts[i].odt_rtt_norm = pdodt[i].odt_rtt_norm; @@ -655,9 +655,9 @@ unsigned int populate_memctl_options(int all_dimms_registered, * 0 for DDR1 * 1 for DDR2 */ -#if defined(CONFIG_FSL_DDR1) +#if defined(CONFIG_SYS_FSL_DDR1) popts->dqs_config = 0; -#elif defined(CONFIG_FSL_DDR2) || defined(CONFIG_FSL_DDR3) +#elif defined(CONFIG_SYS_FSL_DDR2) || defined(CONFIG_SYS_FSL_DDR3) popts->dqs_config = 1; #endif @@ -672,7 +672,7 @@ unsigned int populate_memctl_options(int all_dimms_registered, * presuming all dimms are similar * 0 = 64-bit, 1 = 32-bit, 2 = 16-bit */ -#if defined(CONFIG_FSL_DDR1) || defined(CONFIG_FSL_DDR2) +#if defined(CONFIG_SYS_FSL_DDR1) || defined(CONFIG_SYS_FSL_DDR2) if (pdimm[0].n_ranks != 0) { if ((pdimm[0].data_width >= 64) && \ (pdimm[0].data_width <= 72)) @@ -703,7 +703,7 @@ unsigned int populate_memctl_options(int all_dimms_registered, popts->x4_en = (pdimm[0].device_width == 4) ? 1 : 0; /* Choose burst length. */ -#if defined(CONFIG_FSL_DDR3) +#if defined(CONFIG_SYS_FSL_DDR3) #if defined(CONFIG_E500MC) popts->otf_burst_chop_en = 0; /* on-the-fly burst chop disable */ popts->burst_length = DDR_BL8; /* Fixed 8-beat burst len */ @@ -722,7 +722,7 @@ unsigned int populate_memctl_options(int all_dimms_registered, #endif /* Choose ddr controller address mirror mode */ -#if defined(CONFIG_FSL_DDR3) +#if defined(CONFIG_SYS_FSL_DDR3) popts->mirrored_dimm = pdimm[0].mirrored_dimm; #endif @@ -785,22 +785,22 @@ unsigned int populate_memctl_options(int all_dimms_registered, * FIXME: varies depending upon number of column addresses or data * FIXME: width, was considering looking at pdimm->primary_sdram_width */ -#if defined(CONFIG_FSL_DDR1) +#if defined(CONFIG_SYS_FSL_DDR1) popts->tfaw_window_four_activates_ps = mclk_to_picos(1); -#elif defined(CONFIG_FSL_DDR2) +#elif defined(CONFIG_SYS_FSL_DDR2) /* * x4/x8; some datasheets have 35000 * x16 wide columns only? Use 50000? */ popts->tfaw_window_four_activates_ps = 37500; -#elif defined(CONFIG_FSL_DDR3) +#elif defined(CONFIG_SYS_FSL_DDR3) popts->tfaw_window_four_activates_ps = pdimm[0].tfaw_ps; #endif popts->zq_en = 0; popts->wrlvl_en = 0; -#if defined(CONFIG_FSL_DDR3) +#if defined(CONFIG_SYS_FSL_DDR3) /* * due to ddr3 dimm is fly-by topology * we suggest to enable write leveling to diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/util.c b/drivers/ddr/fsl/util.c index acfe1f095f..0658261d8d 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/util.c +++ b/drivers/ddr/fsl/util.c @@ -7,10 +7,14 @@ */ #include <common.h> +#ifdef CONFIG_PPC #include <asm/fsl_law.h> +#endif #include <div64.h> -#include "ddr.h" +#include <fsl_ddr.h> +#include <fsl_immap.h> +#include <asm/io.h> /* To avoid 64-bit full-divides, we factor this here */ #define ULL_2E12 2000000000000ULL @@ -77,6 +81,7 @@ unsigned int mclk_to_picos(unsigned int mclk) return get_memory_clk_period_ps() * mclk; } +#ifdef CONFIG_PPC void __fsl_ddr_set_lawbar(const common_timing_params_t *memctl_common_params, unsigned int law_memctl, @@ -111,6 +116,7 @@ __attribute__((weak, alias("__fsl_ddr_set_lawbar"))) void fsl_ddr_set_lawbar(const common_timing_params_t *memctl_common_params, unsigned int memctl_interleaved, unsigned int ctrl_num); +#endif void fsl_ddr_set_intl3r(const unsigned int granule_size) { @@ -133,7 +139,8 @@ u32 fsl_ddr_get_intl3r(void) void board_add_ram_info(int use_default) { - ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC8xxx_DDR_ADDR); + struct ccsr_ddr __iomem *ddr = + (struct ccsr_ddr __iomem *)(CONFIG_SYS_FSL_DDR_ADDR); #if defined(CONFIG_E6500) && (CONFIG_NUM_DDR_CONTROLLERS == 3) u32 *mcintl3r = (void *) (CONFIG_SYS_IMMR + 0x18004); @@ -146,13 +153,13 @@ void board_add_ram_info(int use_default) #if CONFIG_NUM_DDR_CONTROLLERS >= 2 if (!(sdram_cfg & SDRAM_CFG_MEM_EN)) { - ddr = (void __iomem *)CONFIG_SYS_MPC8xxx_DDR2_ADDR; + ddr = (void __iomem *)CONFIG_SYS_FSL_DDR2_ADDR; sdram_cfg = in_be32(&ddr->sdram_cfg); } #endif #if CONFIG_NUM_DDR_CONTROLLERS >= 3 if (!(sdram_cfg & SDRAM_CFG_MEM_EN)) { - ddr = (void __iomem *)CONFIG_SYS_MPC8xxx_DDR3_ADDR; + ddr = (void __iomem *)CONFIG_SYS_FSL_DDR3_ADDR; sdram_cfg = in_be32(&ddr->sdram_cfg); } #endif diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile index 4fcdf40fd0..dfb2e7fc76 100644 --- a/drivers/fpga/Makefile +++ b/drivers/fpga/Makefile @@ -5,7 +5,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifdef CONFIG_FPGA obj-y += fpga.o obj-$(CONFIG_FPGA_SPARTAN2) += spartan2.o obj-$(CONFIG_FPGA_SPARTAN3) += spartan3.o @@ -19,4 +18,3 @@ obj-$(CONFIG_FPGA_ACEX1K) += ACEX1K.o obj-$(CONFIG_FPGA_CYCLON2) += cyclon2.o obj-$(CONFIG_FPGA_STRATIX_II) += stratixII.o endif -endif diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile index 5280bb3fe3..553b519cca 100644 --- a/drivers/i2c/Makefile +++ b/drivers/i2c/Makefile @@ -11,21 +11,20 @@ obj-$(CONFIG_DW_I2C) += designware_i2c.o obj-$(CONFIG_I2C_MVTWSI) += mvtwsi.o obj-$(CONFIG_I2C_MV) += mv_i2c.o obj-$(CONFIG_I2C_MXS) += mxs_i2c.o -obj-$(CONFIG_DRIVER_OMAP1510_I2C) += omap1510_i2c.o -obj-$(CONFIG_DRIVER_OMAP24XX_I2C) += omap24xx_i2c.o -obj-$(CONFIG_DRIVER_OMAP34XX_I2C) += omap24xx_i2c.o obj-$(CONFIG_PCA9564_I2C) += pca9564_i2c.o obj-$(CONFIG_DRIVER_S3C24X0_I2C) += s3c24x0_i2c.o obj-$(CONFIG_TSI108_I2C) += tsi108_i2c.o obj-$(CONFIG_U8500_I2C) += u8500_i2c.o -obj-$(CONFIG_SH_I2C) += sh_i2c.o obj-$(CONFIG_SH_SH7734_I2C) += sh_sh7734_i2c.o obj-$(CONFIG_SYS_I2C) += i2c_core.o obj-$(CONFIG_SYS_I2C_FSL) += fsl_i2c.o obj-$(CONFIG_SYS_I2C_FTI2C010) += fti2c010.o obj-$(CONFIG_SYS_I2C_MXC) += mxc_i2c.o +obj-$(CONFIG_SYS_I2C_OMAP24XX) += omap24xx_i2c.o +obj-$(CONFIG_SYS_I2C_OMAP34XX) += omap24xx_i2c.o obj-$(CONFIG_SYS_I2C_PPC4XX) += ppc4xx_i2c.o obj-$(CONFIG_SYS_I2C_RCAR) += rcar_i2c.o +obj-$(CONFIG_SYS_I2C_SH) += sh_i2c.o obj-$(CONFIG_SYS_I2C_SOFT) += soft_i2c.o obj-$(CONFIG_SYS_I2C_TEGRA) += tegra_i2c.o -obj-$(CONFIG_ZYNQ_I2C) += zynq_i2c.o +obj-$(CONFIG_SYS_I2C_ZYNQ) += zynq_i2c.o diff --git a/drivers/i2c/designware_i2c.c b/drivers/i2c/designware_i2c.c index c2f06627d3..cb2ac04b60 100644 --- a/drivers/i2c/designware_i2c.c +++ b/drivers/i2c/designware_i2c.c @@ -151,7 +151,19 @@ void i2c_init(int speed, int slaveadd) */ static void i2c_setaddress(unsigned int i2c_addr) { + unsigned int enbl; + + /* Disable i2c */ + enbl = readl(&i2c_regs_p->ic_enable); + enbl &= ~IC_ENABLE_0B; + writel(enbl, &i2c_regs_p->ic_enable); + writel(i2c_addr, &i2c_regs_p->ic_tar); + + /* Enable i2c */ + enbl = readl(&i2c_regs_p->ic_enable); + enbl |= IC_ENABLE_0B; + writel(enbl, &i2c_regs_p->ic_enable); } /* @@ -237,9 +249,6 @@ static int i2c_xfer_finish(void) i2c_flush_rxfifo(); - /* Wait for read/write operation to complete on actual memory */ - udelay(10000); - return 0; } diff --git a/drivers/i2c/mxs_i2c.c b/drivers/i2c/mxs_i2c.c index 46106b7712..a298c95e14 100644 --- a/drivers/i2c/mxs_i2c.c +++ b/drivers/i2c/mxs_i2c.c @@ -150,6 +150,7 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len) { struct mxs_i2c_regs *i2c_regs = (struct mxs_i2c_regs *)MXS_I2C0_BASE; uint32_t tmp = 0; + int timeout = MXS_I2C_MAX_TIMEOUT; int ret; int i; @@ -169,9 +170,17 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len) for (i = 0; i < len; i++) { if (!(i & 3)) { - while (readl(&i2c_regs->hw_i2c_queuestat) & - I2C_QUEUESTAT_RD_QUEUE_EMPTY) - ; + while (--timeout) { + tmp = readl(&i2c_regs->hw_i2c_queuestat); + if (!(tmp & I2C_QUEUESTAT_RD_QUEUE_EMPTY)) + break; + } + + if (!timeout) { + debug("MXS I2C: Failed receiving data!\n"); + return -ETIMEDOUT; + } + tmp = readl(&i2c_regs->hw_i2c_queuedata); } buffer[i] = tmp & 0xff; diff --git a/drivers/i2c/omap1510_i2c.c b/drivers/i2c/omap1510_i2c.c deleted file mode 100644 index f91ee8884a..0000000000 --- a/drivers/i2c/omap1510_i2c.c +++ /dev/null @@ -1,277 +0,0 @@ -/* - * Basic I2C functions - * - * Copyright (c) 2003 Texas Instruments - * - * This package is free software; you can redistribute it and/or - * modify it under the terms of the license found in the file - * named COPYING that should have accompanied this file. - * - * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED - * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. - * - * Author: Jian Zhang jzhang@ti.com, Texas Instruments - * - * Copyright (c) 2003 Wolfgang Denk, wd@denx.de - * Rewritten to fit into the current U-Boot framework - * - */ - -#include <common.h> - -static void wait_for_bb (void); -static u16 wait_for_pin (void); - -void i2c_init (int speed, int slaveadd) -{ - u16 scl; - - if (inw (I2C_CON) & I2C_CON_EN) { - outw (0, I2C_CON); - udelay (5000); - } - - /* 12MHz I2C module clock */ - outw (0, I2C_PSC); - outw (I2C_CON_EN, I2C_CON); - outw (0, I2C_SYSTEST); - /* have to enable intrrupts or OMAP i2c module doesn't work */ - outw (I2C_IE_XRDY_IE | I2C_IE_RRDY_IE | I2C_IE_ARDY_IE | - I2C_IE_NACK_IE | I2C_IE_AL_IE, I2C_IE); - scl = (12000000 / 2) / speed - 6; - outw (scl, I2C_SCLL); - outw (scl, I2C_SCLH); - /* own address */ - outw (slaveadd, I2C_OA); - outw (0, I2C_CNT); - udelay (1000); -} - -static int i2c_read_byte (u8 devaddr, u8 regoffset, u8 * value) -{ - int i2c_error = 0; - u16 status; - - /* wait until bus not busy */ - wait_for_bb (); - - /* one byte only */ - outw (1, I2C_CNT); - /* set slave address */ - outw (devaddr, I2C_SA); - /* no stop bit needed here */ - outw (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX, I2C_CON); - - status = wait_for_pin (); - - if (status & I2C_STAT_XRDY) { - /* Important: have to use byte access */ - *(volatile u8 *) (I2C_DATA) = regoffset; - udelay (20000); - if (inw (I2C_STAT) & I2C_STAT_NACK) { - i2c_error = 1; - } - } else { - i2c_error = 1; - } - - if (!i2c_error) { - /* free bus, otherwise we can't use a combined transction */ - outw (0, I2C_CON); - while (inw (I2C_STAT) || (inw (I2C_CON) & I2C_CON_MST)) { - udelay (10000); - /* Have to clear pending interrupt to clear I2C_STAT */ - inw (I2C_IV); - } - - wait_for_bb (); - /* set slave address */ - outw (devaddr, I2C_SA); - /* read one byte from slave */ - outw (1, I2C_CNT); - /* need stop bit here */ - outw (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_STP, - I2C_CON); - - status = wait_for_pin (); - if (status & I2C_STAT_RRDY) { - *value = inw (I2C_DATA); - udelay (20000); - } else { - i2c_error = 1; - } - - if (!i2c_error) { - outw (I2C_CON_EN, I2C_CON); - while (inw (I2C_STAT) - || (inw (I2C_CON) & I2C_CON_MST)) { - udelay (10000); - inw (I2C_IV); - } - } - } - - return i2c_error; -} - -static int i2c_write_byte (u8 devaddr, u8 regoffset, u8 value) -{ - int i2c_error = 0; - u16 status; - - /* wait until bus not busy */ - wait_for_bb (); - - /* two bytes */ - outw (2, I2C_CNT); - /* set slave address */ - outw (devaddr, I2C_SA); - /* stop bit needed here */ - outw (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX | - I2C_CON_STP, I2C_CON); - - /* wait until state change */ - status = wait_for_pin (); - - if (status & I2C_STAT_XRDY) { - /* send out two bytes */ - outw ((value << 8) + regoffset, I2C_DATA); - /* must have enough delay to allow BB bit to go low */ - udelay (30000); - if (inw (I2C_STAT) & I2C_STAT_NACK) { - i2c_error = 1; - } - } else { - i2c_error = 1; - } - - if (!i2c_error) { - outw (I2C_CON_EN, I2C_CON); - while (inw (I2C_STAT) || (inw (I2C_CON) & I2C_CON_MST)) { - udelay (1000); - /* have to read to clear intrrupt */ - inw (I2C_IV); - } - } - - return i2c_error; -} - -int i2c_probe (uchar chip) -{ - int res = 1; - - if (chip == inw (I2C_OA)) { - return res; - } - - /* wait until bus not busy */ - wait_for_bb (); - - /* try to read one byte */ - outw (1, I2C_CNT); - /* set slave address */ - outw (chip, I2C_SA); - /* stop bit needed here */ - outw (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_STP, I2C_CON); - /* enough delay for the NACK bit set */ - udelay (2000); - if (!(inw (I2C_STAT) & I2C_STAT_NACK)) { - res = 0; - } else { - outw (inw (I2C_CON) | I2C_CON_STP, I2C_CON); - udelay (20); - wait_for_bb (); - } - - return res; -} - -int i2c_read (uchar chip, uint addr, int alen, uchar * buffer, int len) -{ - int i; - - if (alen > 1) { - printf ("I2C read: addr len %d not supported\n", alen); - return 1; - } - - if (addr + len > 256) { - printf ("I2C read: address out of range\n"); - return 1; - } - - for (i = 0; i < len; i++) { - if (i2c_read_byte (chip, addr + i, &buffer[i])) { - printf ("I2C read: I/O error\n"); - i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); - return 1; - } - } - - return 0; -} - -int i2c_write (uchar chip, uint addr, int alen, uchar * buffer, int len) -{ - int i; - - if (alen > 1) { - printf ("I2C read: addr len %d not supported\n", alen); - return 1; - } - - if (addr + len > 256) { - printf ("I2C read: address out of range\n"); - return 1; - } - - for (i = 0; i < len; i++) { - if (i2c_write_byte (chip, addr + i, buffer[i])) { - printf ("I2C read: I/O error\n"); - i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); - return 1; - } - } - - return 0; -} - -static void wait_for_bb (void) -{ - int timeout = 10; - - while ((inw (I2C_STAT) & I2C_STAT_BB) && timeout--) { - inw (I2C_IV); - udelay (1000); - } - - if (timeout <= 0) { - printf ("timed out in wait_for_bb: I2C_STAT=%x\n", - inw (I2C_STAT)); - } -} - -static u16 wait_for_pin (void) -{ - u16 status, iv; - int timeout = 10; - - do { - udelay (1000); - status = inw (I2C_STAT); - iv = inw (I2C_IV); - } while (!iv && - !(status & - (I2C_STAT_ROVR | I2C_STAT_XUDF | I2C_STAT_XRDY | - I2C_STAT_RRDY | I2C_STAT_ARDY | I2C_STAT_NACK | - I2C_STAT_AL)) && timeout--); - - if (timeout <= 0) { - printf ("timed out in wait_for_pin: I2C_STAT=%x\n", - inw (I2C_STAT)); - } - - return status; -} diff --git a/drivers/i2c/omap24xx_i2c.c b/drivers/i2c/omap24xx_i2c.c index ef38d71725..3d38c035b6 100644 --- a/drivers/i2c/omap24xx_i2c.c +++ b/drivers/i2c/omap24xx_i2c.c @@ -35,6 +35,7 @@ */ #include <common.h> +#include <i2c.h> #include <asm/arch/i2c.h> #include <asm/io.h> @@ -48,22 +49,14 @@ DECLARE_GLOBAL_DATA_PTR; /* Absolutely safe for status update at 100 kHz I2C: */ #define I2C_WAIT 200 -static int wait_for_bb(void); -static u16 wait_for_event(void); -static void flush_fifo(void); +static int wait_for_bb(struct i2c_adapter *adap); +static struct i2c *omap24_get_base(struct i2c_adapter *adap); +static u16 wait_for_event(struct i2c_adapter *adap); +static void flush_fifo(struct i2c_adapter *adap); -/* - * For SPL boot some boards need i2c before SDRAM is initialised so force - * variables to live in SRAM - */ -static struct i2c __attribute__((section (".data"))) *i2c_base = - (struct i2c *)I2C_DEFAULT_BASE; -static unsigned int __attribute__((section (".data"))) bus_initialized[I2C_BUS_MAX] = - { [0 ... (I2C_BUS_MAX-1)] = 0 }; -static unsigned int __attribute__((section (".data"))) current_bus = 0; - -void i2c_init(int speed, int slaveadd) +static void omap24_i2c_init(struct i2c_adapter *adap, int speed, int slaveadd) { + struct i2c *i2c_base = omap24_get_base(adap); int psc, fsscll, fssclh; int hsscll = 0, hssclh = 0; u32 scll, sclh; @@ -163,16 +156,15 @@ void i2c_init(int speed, int slaveadd) I2C_IE_NACK_IE | I2C_IE_AL_IE, &i2c_base->ie); #endif udelay(1000); - flush_fifo(); + flush_fifo(adap); writew(0xFFFF, &i2c_base->stat); writew(0, &i2c_base->cnt); - - if (gd->flags & GD_FLG_RELOC) - bus_initialized[current_bus] = 1; } -static void flush_fifo(void) -{ u16 stat; +static void flush_fifo(struct i2c_adapter *adap) +{ + struct i2c *i2c_base = omap24_get_base(adap); + u16 stat; /* note: if you try and read data when its not there or ready * you get a bus error @@ -192,8 +184,9 @@ static void flush_fifo(void) * i2c_probe: Use write access. Allows to identify addresses that are * write-only (like the config register of dual-port EEPROMs) */ -int i2c_probe(uchar chip) +static int omap24_i2c_probe(struct i2c_adapter *adap, uchar chip) { + struct i2c *i2c_base = omap24_get_base(adap); u16 status; int res = 1; /* default = fail */ @@ -201,7 +194,7 @@ int i2c_probe(uchar chip) return res; /* Wait until bus is free */ - if (wait_for_bb()) + if (wait_for_bb(adap)) return res; /* No data transfer, slave addr only */ @@ -212,7 +205,7 @@ int i2c_probe(uchar chip) writew(I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX | I2C_CON_STP, &i2c_base->con); - status = wait_for_event(); + status = wait_for_event(adap); if ((status & ~I2C_STAT_XRDY) == 0 || (status & I2C_STAT_AL)) { /* @@ -223,7 +216,7 @@ int i2c_probe(uchar chip) */ if (status == I2C_STAT_XRDY) printf("i2c_probe: pads on bus %d probably not configured (status=0x%x)\n", - current_bus, status); + adap->hwadapnr, status); goto pr_exit; } @@ -239,7 +232,7 @@ int i2c_probe(uchar chip) I2C_CON_STP, &i2c_base->con); /* STP */ } pr_exit: - flush_fifo(); + flush_fifo(adap); writew(0xFFFF, &i2c_base->stat); writew(0, &i2c_base->cnt); return res; @@ -258,8 +251,10 @@ pr_exit: * or that do not need a register address at all (such as some clock * distributors). */ -int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len) +static int omap24_i2c_read(struct i2c_adapter *adap, uchar chip, uint addr, + int alen, uchar *buffer, int len) { + struct i2c *i2c_base = omap24_get_base(adap); int i2c_error = 0; u16 status; @@ -287,7 +282,7 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len) } /* Wait until bus not busy */ - if (wait_for_bb()) + if (wait_for_bb(adap)) return 1; /* Zero, one or two bytes reg address (offset) */ @@ -308,12 +303,12 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len) #endif /* Send register offset */ while (1) { - status = wait_for_event(); + status = wait_for_event(adap); /* Try to identify bus that is not padconf'd for I2C */ if (status == I2C_STAT_XRDY) { i2c_error = 2; printf("i2c_read (addr phase): pads on bus %d probably not configured (status=0x%x)\n", - current_bus, status); + adap->hwadapnr, status); goto rd_exit; } if (status == 0 || status & I2C_STAT_NACK) { @@ -348,7 +343,7 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len) /* Receive data */ while (1) { - status = wait_for_event(); + status = wait_for_event(adap); /* * Try to identify bus that is not padconf'd for I2C. This * state could be left over from previous transactions if @@ -357,7 +352,7 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len) if (status == I2C_STAT_XRDY) { i2c_error = 2; printf("i2c_read (data phase): pads on bus %d probably not configured (status=0x%x)\n", - current_bus, status); + adap->hwadapnr, status); goto rd_exit; } if (status == 0 || status & I2C_STAT_NACK) { @@ -375,15 +370,17 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len) } rd_exit: - flush_fifo(); + flush_fifo(adap); writew(0xFFFF, &i2c_base->stat); writew(0, &i2c_base->cnt); return i2c_error; } /* i2c_write: Address (reg offset) may be 0, 1 or 2 bytes long. */ -int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len) +static int omap24_i2c_write(struct i2c_adapter *adap, uchar chip, uint addr, + int alen, uchar *buffer, int len) { + struct i2c *i2c_base = omap24_get_base(adap); int i; u16 status; int i2c_error = 0; @@ -415,7 +412,7 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len) } /* Wait until bus not busy */ - if (wait_for_bb()) + if (wait_for_bb(adap)) return 1; /* Start address phase - will write regoffset + len bytes data */ @@ -428,12 +425,12 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len) while (alen) { /* Must write reg offset (one or two bytes) */ - status = wait_for_event(); + status = wait_for_event(adap); /* Try to identify bus that is not padconf'd for I2C */ if (status == I2C_STAT_XRDY) { i2c_error = 2; printf("i2c_write: pads on bus %d probably not configured (status=0x%x)\n", - current_bus, status); + adap->hwadapnr, status); goto wr_exit; } if (status == 0 || status & I2C_STAT_NACK) { @@ -455,7 +452,7 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len) } /* Address phase is over, now write data */ for (i = 0; i < len; i++) { - status = wait_for_event(); + status = wait_for_event(adap); if (status == 0 || status & I2C_STAT_NACK) { i2c_error = 1; printf("i2c_write: error waiting for data ACK (status=0x%x)\n", @@ -474,7 +471,7 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len) } wr_exit: - flush_fifo(); + flush_fifo(adap); writew(0xFFFF, &i2c_base->stat); writew(0, &i2c_base->cnt); return i2c_error; @@ -484,8 +481,9 @@ wr_exit: * Wait for the bus to be free by checking the Bus Busy (BB) * bit to become clear */ -static int wait_for_bb(void) +static int wait_for_bb(struct i2c_adapter *adap) { + struct i2c *i2c_base = omap24_get_base(adap); int timeout = I2C_TIMEOUT; u16 stat; @@ -514,8 +512,9 @@ static int wait_for_bb(void) * Wait for the I2C controller to complete current action * and update status */ -static u16 wait_for_event(void) +static u16 wait_for_event(struct i2c_adapter *adap) { + struct i2c *i2c_base = omap24_get_base(adap); u16 status; int timeout = I2C_TIMEOUT; @@ -540,7 +539,7 @@ static u16 wait_for_event(void) * not been configured for I2C, and/or pull-ups are missing. */ printf("Check if pads/pull-ups of bus %d are properly configured\n", - current_bus); + adap->hwadapnr); writew(0xFFFF, &i2c_base->stat); status = 0; } @@ -548,48 +547,93 @@ static u16 wait_for_event(void) return status; } -int i2c_set_bus_num(unsigned int bus) +static struct i2c *omap24_get_base(struct i2c_adapter *adap) { - if (bus >= I2C_BUS_MAX) { - printf("Bad bus: %x\n", bus); - return -1; - } - - switch (bus) { - default: - bus = 0; /* Fall through */ + switch (adap->hwadapnr) { case 0: - i2c_base = (struct i2c *)I2C_BASE1; + return (struct i2c *)I2C_BASE1; break; case 1: - i2c_base = (struct i2c *)I2C_BASE2; + return (struct i2c *)I2C_BASE2; break; #if (I2C_BUS_MAX > 2) case 2: - i2c_base = (struct i2c *)I2C_BASE3; + return (struct i2c *)I2C_BASE3; break; #if (I2C_BUS_MAX > 3) case 3: - i2c_base = (struct i2c *)I2C_BASE4; + return (struct i2c *)I2C_BASE4; break; #if (I2C_BUS_MAX > 4) case 4: - i2c_base = (struct i2c *)I2C_BASE5; + return (struct i2c *)I2C_BASE5; break; #endif #endif #endif + default: + printf("wrong hwadapnr: %d\n", adap->hwadapnr); + break; } + return NULL; +} - current_bus = bus; +#if !defined(CONFIG_SYS_OMAP24_I2C_SPEED1) +#define CONFIG_SYS_OMAP24_I2C_SPEED1 CONFIG_SYS_OMAP24_I2C_SPEED +#endif +#if !defined(CONFIG_SYS_OMAP24_I2C_SLAVE1) +#define CONFIG_SYS_OMAP24_I2C_SLAVE1 CONFIG_SYS_OMAP24_I2C_SLAVE +#endif - if (!bus_initialized[current_bus]) - i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); +U_BOOT_I2C_ADAP_COMPLETE(omap24_0, omap24_i2c_init, omap24_i2c_probe, + omap24_i2c_read, omap24_i2c_write, NULL, + CONFIG_SYS_OMAP24_I2C_SPEED, + CONFIG_SYS_OMAP24_I2C_SLAVE, + 0) +U_BOOT_I2C_ADAP_COMPLETE(omap24_1, omap24_i2c_init, omap24_i2c_probe, + omap24_i2c_read, omap24_i2c_write, NULL, + CONFIG_SYS_OMAP24_I2C_SPEED1, + CONFIG_SYS_OMAP24_I2C_SLAVE1, + 1) +#if (I2C_BUS_MAX > 2) +#if !defined(CONFIG_SYS_OMAP24_I2C_SPEED2) +#define CONFIG_SYS_OMAP24_I2C_SPEED2 CONFIG_SYS_OMAP24_I2C_SPEED +#endif +#if !defined(CONFIG_SYS_OMAP24_I2C_SLAVE2) +#define CONFIG_SYS_OMAP24_I2C_SLAVE2 CONFIG_SYS_OMAP24_I2C_SLAVE +#endif - return 0; -} +U_BOOT_I2C_ADAP_COMPLETE(omap24_2, omap24_i2c_init, omap24_i2c_probe, + omap24_i2c_read, omap24_i2c_write, NULL, + CONFIG_SYS_OMAP24_I2C_SPEED2, + CONFIG_SYS_OMAP24_I2C_SLAVE2, + 2) +#if (I2C_BUS_MAX > 3) +#if !defined(CONFIG_SYS_OMAP24_I2C_SPEED3) +#define CONFIG_SYS_OMAP24_I2C_SPEED3 CONFIG_SYS_OMAP24_I2C_SPEED +#endif +#if !defined(CONFIG_SYS_OMAP24_I2C_SLAVE3) +#define CONFIG_SYS_OMAP24_I2C_SLAVE3 CONFIG_SYS_OMAP24_I2C_SLAVE +#endif -int i2c_get_bus_num(void) -{ - return (int) current_bus; -} +U_BOOT_I2C_ADAP_COMPLETE(omap24_3, omap24_i2c_init, omap24_i2c_probe, + omap24_i2c_read, omap24_i2c_write, NULL, + CONFIG_SYS_OMAP24_I2C_SPEED3, + CONFIG_SYS_OMAP24_I2C_SLAVE3, + 3) +#if (I2C_BUS_MAX > 4) +#if !defined(CONFIG_SYS_OMAP24_I2C_SPEED4) +#define CONFIG_SYS_OMAP24_I2C_SPEED4 CONFIG_SYS_OMAP24_I2C_SPEED +#endif +#if !defined(CONFIG_SYS_OMAP24_I2C_SLAVE4) +#define CONFIG_SYS_OMAP24_I2C_SLAVE4 CONFIG_SYS_OMAP24_I2C_SLAVE +#endif + +U_BOOT_I2C_ADAP_COMPLETE(omap24_4, omap24_i2c_init, omap24_i2c_probe, + omap24_i2c_read, omap24_i2c_write, NULL, + CONFIG_SYS_OMAP24_I2C_SPEED4, + CONFIG_SYS_OMAP24_I2C_SLAVE4, + 4) +#endif +#endif +#endif diff --git a/drivers/i2c/sh_i2c.c b/drivers/i2c/sh_i2c.c index 808202c299..cc19100750 100644 --- a/drivers/i2c/sh_i2c.c +++ b/drivers/i2c/sh_i2c.c @@ -6,6 +6,7 @@ */ #include <common.h> +#include <i2c.h> #include <asm/io.h> DECLARE_GLOBAL_DATA_PTR; @@ -22,8 +23,6 @@ struct sh_i2c { }; #undef ureg -static struct sh_i2c *base; - /* ICCR */ #define SH_I2C_ICCR_ICE (1 << 7) #define SH_I2C_ICCR_RACK (1 << 6) @@ -43,202 +42,165 @@ static struct sh_i2c *base; #define SH_I2C_ICIC_ICCHB8 (1 << 6) #endif +static const struct sh_i2c *i2c_dev[CONFIG_SYS_I2C_SH_NUM_CONTROLLERS] = { + (struct sh_i2c *)CONFIG_SYS_I2C_SH_BASE0, +#ifdef CONFIG_SYS_I2C_SH_BASE1 + (struct sh_i2c *)CONFIG_SYS_I2C_SH_BASE1, +#endif +#ifdef CONFIG_SYS_I2C_SH_BASE2 + (struct sh_i2c *)CONFIG_SYS_I2C_SH_BASE2, +#endif +#ifdef CONFIG_SYS_I2C_SH_BASE3 + (struct sh_i2c *)CONFIG_SYS_I2C_SH_BASE3, +#endif +#ifdef CONFIG_SYS_I2C_SH_BASE4 + (struct sh_i2c *)CONFIG_SYS_I2C_SH_BASE4, +#endif +}; + static u16 iccl, icch; #define IRQ_WAIT 1000 -static void irq_dte(struct sh_i2c *base) +static void sh_irq_dte(struct sh_i2c *dev) { int i; - for (i = 0 ; i < IRQ_WAIT ; i++) { - if (SH_IC_DTE & readb(&base->icsr)) + for (i = 0; i < IRQ_WAIT; i++) { + if (SH_IC_DTE & readb(&dev->icsr)) break; udelay(10); } } -static int irq_dte_with_tack(struct sh_i2c *base) +static int sh_irq_dte_with_tack(struct sh_i2c *dev) { int i; - for (i = 0 ; i < IRQ_WAIT ; i++) { - if (SH_IC_DTE & readb(&base->icsr)) + for (i = 0; i < IRQ_WAIT; i++) { + if (SH_IC_DTE & readb(&dev->icsr)) break; - if (SH_IC_TACK & readb(&base->icsr)) + if (SH_IC_TACK & readb(&dev->icsr)) return -1; udelay(10); } return 0; } -static void irq_busy(struct sh_i2c *base) +static void sh_irq_busy(struct sh_i2c *dev) { int i; - for (i = 0 ; i < IRQ_WAIT ; i++) { - if (!(SH_IC_BUSY & readb(&base->icsr))) + for (i = 0; i < IRQ_WAIT; i++) { + if (!(SH_IC_BUSY & readb(&dev->icsr))) break; udelay(10); } } -static int i2c_set_addr(struct sh_i2c *base, u8 id, u8 reg, int stop) +static int sh_i2c_set_addr(struct sh_i2c *dev, u8 chip, u8 addr, int stop) { u8 icic = SH_IC_TACK; - clrbits_8(&base->iccr, SH_I2C_ICCR_ICE); - setbits_8(&base->iccr, SH_I2C_ICCR_ICE); + debug("%s: chip: %x, addr: %x iccl: %x, icch %x\n", + __func__, chip, addr, iccl, icch); + clrbits_8(&dev->iccr, SH_I2C_ICCR_ICE); + setbits_8(&dev->iccr, SH_I2C_ICCR_ICE); - writeb(iccl & 0xff, &base->iccl); - writeb(icch & 0xff, &base->icch); + writeb(iccl & 0xff, &dev->iccl); + writeb(icch & 0xff, &dev->icch); #ifdef CONFIG_SH_I2C_8BIT if (iccl > 0xff) icic |= SH_I2C_ICIC_ICCLB8; if (icch > 0xff) icic |= SH_I2C_ICIC_ICCHB8; #endif - writeb(icic, &base->icic); + writeb(icic, &dev->icic); - writeb((SH_I2C_ICCR_ICE|SH_I2C_ICCR_RTS|SH_I2C_ICCR_BUSY), &base->iccr); - irq_dte(base); + writeb((SH_I2C_ICCR_ICE|SH_I2C_ICCR_RTS|SH_I2C_ICCR_BUSY), &dev->iccr); + sh_irq_dte(dev); - clrbits_8(&base->icsr, SH_IC_TACK); - writeb(id << 1, &base->icdr); - if (irq_dte_with_tack(base) != 0) + clrbits_8(&dev->icsr, SH_IC_TACK); + writeb(chip << 1, &dev->icdr); + if (sh_irq_dte_with_tack(dev) != 0) return -1; - writeb(reg, &base->icdr); + writeb(addr, &dev->icdr); if (stop) - writeb((SH_I2C_ICCR_ICE|SH_I2C_ICCR_RTS), &base->iccr); + writeb((SH_I2C_ICCR_ICE|SH_I2C_ICCR_RTS), &dev->iccr); - if (irq_dte_with_tack(base) != 0) + if (sh_irq_dte_with_tack(dev) != 0) return -1; return 0; } -static void i2c_finish(struct sh_i2c *base) +static void sh_i2c_finish(struct sh_i2c *dev) { - writeb(0, &base->icsr); - clrbits_8(&base->iccr, SH_I2C_ICCR_ICE); + writeb(0, &dev->icsr); + clrbits_8(&dev->iccr, SH_I2C_ICCR_ICE); } -static int i2c_raw_write(struct sh_i2c *base, u8 id, u8 reg, u8 val) +static int +sh_i2c_raw_write(struct sh_i2c *dev, u8 chip, uint addr, u8 val) { int ret = -1; - if (i2c_set_addr(base, id, reg, 0) != 0) + if (sh_i2c_set_addr(dev, chip, addr, 0) != 0) goto exit0; udelay(10); - writeb(val, &base->icdr); - if (irq_dte_with_tack(base) != 0) + writeb(val, &dev->icdr); + if (sh_irq_dte_with_tack(dev) != 0) goto exit0; - writeb((SH_I2C_ICCR_ICE | SH_I2C_ICCR_RTS), &base->iccr); - if (irq_dte_with_tack(base) != 0) + writeb((SH_I2C_ICCR_ICE | SH_I2C_ICCR_RTS), &dev->iccr); + if (sh_irq_dte_with_tack(dev) != 0) goto exit0; - irq_busy(base); + sh_irq_busy(dev); ret = 0; + exit0: - i2c_finish(base); + sh_i2c_finish(dev); return ret; } -static int i2c_raw_read(struct sh_i2c *base, u8 id, u8 reg) +static int sh_i2c_raw_read(struct sh_i2c *dev, u8 chip, u8 addr) { int ret = -1; #if defined(CONFIG_SH73A0) - if (i2c_set_addr(base, id, reg, 0) != 0) + if (sh_i2c_set_addr(dev, chip, addr, 0) != 0) goto exit0; #else - if (i2c_set_addr(base, id, reg, 1) != 0) + if (sh_i2c_set_addr(dev, chip, addr, 1) != 0) goto exit0; udelay(100); #endif - writeb((SH_I2C_ICCR_ICE|SH_I2C_ICCR_RTS|SH_I2C_ICCR_BUSY), &base->iccr); - irq_dte(base); + writeb((SH_I2C_ICCR_ICE|SH_I2C_ICCR_RTS|SH_I2C_ICCR_BUSY), &dev->iccr); + sh_irq_dte(dev); - writeb(id << 1 | 0x01, &base->icdr); - if (irq_dte_with_tack(base) != 0) + writeb(chip << 1 | 0x01, &dev->icdr); + if (sh_irq_dte_with_tack(dev) != 0) goto exit0; - writeb((SH_I2C_ICCR_ICE|SH_I2C_ICCR_SCP), &base->iccr); - if (irq_dte_with_tack(base) != 0) + writeb((SH_I2C_ICCR_ICE|SH_I2C_ICCR_SCP), &dev->iccr); + if (sh_irq_dte_with_tack(dev) != 0) goto exit0; - ret = readb(&base->icdr) & 0xff; + ret = readb(&dev->icdr) & 0xff; + + writeb((SH_I2C_ICCR_ICE|SH_I2C_ICCR_RACK), &dev->iccr); + readb(&dev->icdr); /* Dummy read */ + sh_irq_busy(dev); - writeb((SH_I2C_ICCR_ICE|SH_I2C_ICCR_RACK), &base->iccr); - readb(&base->icdr); /* Dummy read */ - irq_busy(base); exit0: - i2c_finish(base); + sh_i2c_finish(dev); return ret; } -#ifdef CONFIG_I2C_MULTI_BUS -static unsigned int current_bus; - -/** - * i2c_set_bus_num - change active I2C bus - * @bus: bus index, zero based - * @returns: 0 on success, non-0 on failure - */ -int i2c_set_bus_num(unsigned int bus) -{ - if ((bus < 0) || (bus >= CONFIG_SYS_MAX_I2C_BUS)) { - printf("Bad bus: %d\n", bus); - return -1; - } - - switch (bus) { - case 0: - base = (void *)CONFIG_SH_I2C_BASE0; - break; - case 1: - base = (void *)CONFIG_SH_I2C_BASE1; - break; -#ifdef CONFIG_SH_I2C_BASE2 - case 2: - base = (void *)CONFIG_SH_I2C_BASE2; - break; -#endif -#ifdef CONFIG_SH_I2C_BASE3 - case 3: - base = (void *)CONFIG_SH_I2C_BASE3; - break; -#endif -#ifdef CONFIG_SH_I2C_BASE4 - case 4: - base = (void *)CONFIG_SH_I2C_BASE4; - break; -#endif - default: - return -1; - } - current_bus = bus; - - return 0; -} - -/** - * i2c_get_bus_num - returns index of active I2C bus - */ -unsigned int i2c_get_bus_num(void) -{ - return current_bus; -} -#endif - -#define SH_I2C_ICCL_CALC(clk, date, t_low, t_high) \ - ((clk / rate) * (t_low / t_low + t_high)) -#define SH_I2C_ICCH_CALC(clk, date, t_low, t_high) \ - ((clk / rate) * (t_high / t_low + t_high)) - -void i2c_init(int speed, int slaveaddr) +static void +sh_i2c_init(struct i2c_adapter *adap, int speed, int slaveadd) { int num, denom, tmp; @@ -246,11 +208,6 @@ void i2c_init(int speed, int slaveaddr) if (!(gd->flags & GD_FLG_RELOC)) return; -#ifdef CONFIG_I2C_MULTI_BUS - current_bus = 0; -#endif - base = (struct sh_i2c *)CONFIG_SH_I2C_BASE0; - /* * Calculate the value for iccl. From the data sheet: * iccl = (p-clock / transfer-rate) * (L / (L + H)) @@ -272,67 +229,78 @@ void i2c_init(int speed, int slaveaddr) icch = (u16)((num/denom) + 1); else icch = (u16)(num/denom); + + debug("clock: %d, speed %d, iccl: %x, icch: %x\n", + CONFIG_SH_I2C_CLOCK, speed, iccl, icch); } -/* - * i2c_read: - Read multiple bytes from an i2c device - * - * The higher level routines take into account that this function is only - * called with len < page length of the device (see configuration file) - * - * @chip: address of the chip which is to be read - * @addr: i2c data address within the chip - * @alen: length of the i2c data address (1..2 bytes) - * @buffer: where to write the data - * @len: how much byte do we want to read - * @return: 0 in case of success - */ -int i2c_read(u8 chip, u32 addr, int alen, u8 *buffer, int len) +static int sh_i2c_read(struct i2c_adapter *adap, uint8_t chip, + uint addr, int alen, u8 *data, int len) { - int ret; - int i = 0; - for (i = 0 ; i < len ; i++) { - ret = i2c_raw_read(base, chip, addr + i); + int ret, i; + struct sh_i2c *dev = (struct sh_i2c *)i2c_dev[adap->hwadapnr]; + + for (i = 0; i < len; i++) { + ret = sh_i2c_raw_read(dev, chip, addr + i); if (ret < 0) return -1; - buffer[i] = ret & 0xff; + + data[i] = ret & 0xff; + debug("%s: data[%d]: %02x\n", __func__, i, data[i]); } + return 0; } -/* - * i2c_write: - Write multiple bytes to an i2c device - * - * The higher level routines take into account that this function is only - * called with len < page length of the device (see configuration file) - * - * @chip: address of the chip which is to be written - * @addr: i2c data address within the chip - * @alen: length of the i2c data address (1..2 bytes) - * @buffer: where to find the data to be written - * @len: how much byte do we want to read - * @return: 0 in case of success - */ -int i2c_write(u8 chip, u32 addr, int alen, u8 *buffer, int len) +static int sh_i2c_write(struct i2c_adapter *adap, uint8_t chip, uint addr, + int alen, u8 *data, int len) { - int i = 0; - for (i = 0; i < len ; i++) - if (i2c_raw_write(base, chip, addr + i, buffer[i]) != 0) + struct sh_i2c *dev = (struct sh_i2c *)i2c_dev[adap->hwadapnr]; + int i; + + for (i = 0; i < len; i++) { + debug("%s: data[%d]: %02x\n", __func__, i, data[i]); + if (sh_i2c_raw_write(dev, chip, addr + i, data[i]) != 0) return -1; + } return 0; } -/* - * i2c_probe: - Test if a chip answers for a given i2c address - * - * @chip: address of the chip which is searched for - * @return: 0 if a chip was found, -1 otherwhise - */ -int i2c_probe(u8 chip) +static int +sh_i2c_probe(struct i2c_adapter *adap, u8 dev) { - int ret; + return sh_i2c_read(adap, dev, 0, 0, NULL, 0); +} - ret = i2c_set_addr(base, chip, 0, 1); - i2c_finish(base); - return ret; +static unsigned int sh_i2c_set_bus_speed(struct i2c_adapter *adap, + unsigned int speed) +{ + struct sh_i2c *dev = (struct sh_i2c *)i2c_dev[adap->hwadapnr]; + + sh_i2c_finish(dev); + sh_i2c_init(adap, speed, 0); + + return 0; } + +/* + * Register RCAR i2c adapters + */ +U_BOOT_I2C_ADAP_COMPLETE(sh_0, sh_i2c_init, sh_i2c_probe, sh_i2c_read, + sh_i2c_write, sh_i2c_set_bus_speed, CONFIG_SYS_I2C_SH_SPEED0, 0, 0) +#ifdef CONFIG_SYS_I2C_SH_BASE1 +U_BOOT_I2C_ADAP_COMPLETE(sh_1, sh_i2c_init, sh_i2c_probe, sh_i2c_read, + sh_i2c_write, sh_i2c_set_bus_speed, CONFIG_SYS_I2C_SH_SPEED1, 0, 1) +#endif +#ifdef CONFIG_SYS_I2C_SH_BASE2 +U_BOOT_I2C_ADAP_COMPLETE(sh_2, sh_i2c_init, sh_i2c_probe, sh_i2c_read, + sh_i2c_write, sh_i2c_set_bus_speed, CONFIG_SYS_I2C_SH_SPEED2, 0, 2) +#endif +#ifdef CONFIG_SYS_I2C_SH_BASE3 +U_BOOT_I2C_ADAP_COMPLETE(sh_3, sh_i2c_init, sh_i2c_probe, sh_i2c_read, + sh_i2c_write, sh_i2c_set_bus_speed, CONFIG_SYS_I2C_SH_SPEED3, 0, 3) +#endif +#ifdef CONFIG_SYS_I2C_SH_BASE4 +U_BOOT_I2C_ADAP_COMPLETE(sh_4, sh_i2c_init, sh_i2c_probe, sh_i2c_read, + sh_i2c_write, sh_i2c_set_bus_speed, CONFIG_SYS_I2C_SH_SPEED4, 0, 4) +#endif diff --git a/drivers/i2c/zynq_i2c.c b/drivers/i2c/zynq_i2c.c index ce2d23f725..70a9aeafd5 100644 --- a/drivers/i2c/zynq_i2c.c +++ b/drivers/i2c/zynq_i2c.c @@ -74,7 +74,8 @@ static struct zynq_i2c_registers *zynq_i2c = (struct zynq_i2c_registers *)ZYNQ_I2C_BASE; /* I2C init called by cmd_i2c when doing 'i2c reset'. */ -void i2c_init(int requested_speed, int slaveadd) +static void zynq_i2c_init(struct i2c_adapter *adap, int requested_speed, + int slaveadd) { /* 111MHz / ( (3 * 17) * 22 ) = ~100KHz */ writel((16 << ZYNQ_I2C_CONTROL_DIV_B_SHIFT) | @@ -151,7 +152,7 @@ static u32 zynq_i2c_wait(u32 mask) * I2C probe called by cmd_i2c when doing 'i2c probe'. * Begin read, nak data byte, end. */ -int i2c_probe(u8 dev) +static int zynq_i2c_probe(struct i2c_adapter *adap, u8 dev) { /* Attempt to read a byte */ setbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_CLR_FIFO | @@ -170,7 +171,8 @@ int i2c_probe(u8 dev) * I2C read called by cmd_i2c when doing 'i2c read' and by cmd_eeprom.c * Begin write, send address byte(s), begin read, receive data bytes, end. */ -int i2c_read(u8 dev, uint addr, int alen, u8 *data, int length) +static int zynq_i2c_read(struct i2c_adapter *adap, u8 dev, uint addr, + int alen, u8 *data, int length) { u32 status; u32 i = 0; @@ -235,7 +237,8 @@ int i2c_read(u8 dev, uint addr, int alen, u8 *data, int length) * I2C write called by cmd_i2c when doing 'i2c write' and by cmd_eeprom.c * Begin write, send address byte(s), send data bytes, end. */ -int i2c_write(u8 dev, uint addr, int alen, u8 *data, int length) +static int zynq_i2c_write(struct i2c_adapter *adap, u8 dev, uint addr, + int alen, u8 *data, int length) { u8 *cur_data = data; @@ -275,16 +278,16 @@ int i2c_write(u8 dev, uint addr, int alen, u8 *data, int length) return 0; } -int i2c_set_bus_num(unsigned int bus) +static unsigned int zynq_i2c_set_bus_speed(struct i2c_adapter *adap, + unsigned int speed) { - /* Only support bus 0 */ - if (bus > 0) - return -1; - return 0; -} + if (speed != 1000000) + return -EINVAL; -unsigned int i2c_get_bus_num(void) -{ - /* Only support bus 0 */ return 0; } + +U_BOOT_I2C_ADAP_COMPLETE(zynq_0, zynq_i2c_init, zynq_i2c_probe, zynq_i2c_read, + zynq_i2c_write, zynq_i2c_set_bus_speed, + CONFIG_SYS_I2C_ZYNQ_SPEED, CONFIG_SYS_I2C_ZYNQ_SLAVE, + 0) diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index d8ff9c6413..c77e40a2d4 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -20,3 +20,4 @@ obj-$(CONFIG_NS87308) += ns87308.o obj-$(CONFIG_PDSP188x) += pdsp188x.o obj-$(CONFIG_STATUS_LED) += status_led.o obj-$(CONFIG_TWL4030_LED) += twl4030_led.o +obj-$(CONFIG_FSL_IFC) += fsl_ifc.o diff --git a/arch/powerpc/cpu/mpc8xxx/fsl_ifc.c b/drivers/misc/fsl_ifc.c index 2d0fb433bc..be61973667 100644 --- a/arch/powerpc/cpu/mpc8xxx/fsl_ifc.c +++ b/drivers/misc/fsl_ifc.c @@ -6,7 +6,7 @@ */ #include <common.h> -#include <asm/fsl_ifc.h> +#include <fsl_ifc.h> void print_ifc_regs(void) { @@ -34,6 +34,9 @@ void init_early_memctl_regs(void) #ifdef CONFIG_SYS_CSPR0_EXT set_ifc_cspr_ext(IFC_CS0, CONFIG_SYS_CSPR0_EXT); #endif +#ifdef CONFIG_SYS_CSOR0_EXT + set_ifc_csor_ext(IFC_CS0, CONFIG_SYS_CSOR0_EXT); +#endif set_ifc_cspr(IFC_CS0, CONFIG_SYS_CSPR0); set_ifc_amask(IFC_CS0, CONFIG_SYS_AMASK0); set_ifc_csor(IFC_CS0, CONFIG_SYS_CSOR0); @@ -43,6 +46,9 @@ void init_early_memctl_regs(void) #ifdef CONFIG_SYS_CSPR1_EXT set_ifc_cspr_ext(IFC_CS1, CONFIG_SYS_CSPR1_EXT); #endif +#ifdef CONFIG_SYS_CSOR1_EXT + set_ifc_csor_ext(IFC_CS1, CONFIG_SYS_CSOR1_EXT); +#endif #if defined(CONFIG_SYS_CSPR1) && defined(CONFIG_SYS_CSOR1) set_ifc_ftim(IFC_CS1, IFC_FTIM0, CONFIG_SYS_CS1_FTIM0); set_ifc_ftim(IFC_CS1, IFC_FTIM1, CONFIG_SYS_CS1_FTIM1); @@ -57,6 +63,9 @@ void init_early_memctl_regs(void) #ifdef CONFIG_SYS_CSPR2_EXT set_ifc_cspr_ext(IFC_CS2, CONFIG_SYS_CSPR2_EXT); #endif +#ifdef CONFIG_SYS_CSOR2_EXT + set_ifc_csor_ext(IFC_CS2, CONFIG_SYS_CSOR2_EXT); +#endif #if defined(CONFIG_SYS_CSPR2) && defined(CONFIG_SYS_CSOR2) set_ifc_ftim(IFC_CS2, IFC_FTIM0, CONFIG_SYS_CS2_FTIM0); set_ifc_ftim(IFC_CS2, IFC_FTIM1, CONFIG_SYS_CS2_FTIM1); @@ -71,6 +80,9 @@ void init_early_memctl_regs(void) #ifdef CONFIG_SYS_CSPR3_EXT set_ifc_cspr_ext(IFC_CS3, CONFIG_SYS_CSPR3_EXT); #endif +#ifdef CONFIG_SYS_CSOR3_EXT + set_ifc_csor_ext(IFC_CS3, CONFIG_SYS_CSOR3_EXT); +#endif #if defined(CONFIG_SYS_CSPR3) && defined(CONFIG_SYS_CSOR3) set_ifc_ftim(IFC_CS3, IFC_FTIM0, CONFIG_SYS_CS3_FTIM0); set_ifc_ftim(IFC_CS3, IFC_FTIM1, CONFIG_SYS_CS3_FTIM1); @@ -85,6 +97,9 @@ void init_early_memctl_regs(void) #ifdef CONFIG_SYS_CSPR4_EXT set_ifc_cspr_ext(IFC_CS4, CONFIG_SYS_CSPR4_EXT); #endif +#ifdef CONFIG_SYS_CSOR4_EXT + set_ifc_csor_ext(IFC_CS4, CONFIG_SYS_CSOR4_EXT); +#endif #if defined(CONFIG_SYS_CSPR4) && defined(CONFIG_SYS_CSOR4) set_ifc_ftim(IFC_CS4, IFC_FTIM0, CONFIG_SYS_CS4_FTIM0); set_ifc_ftim(IFC_CS4, IFC_FTIM1, CONFIG_SYS_CS4_FTIM1); @@ -99,6 +114,9 @@ void init_early_memctl_regs(void) #ifdef CONFIG_SYS_CSPR5_EXT set_ifc_cspr_ext(IFC_CS5, CONFIG_SYS_CSPR5_EXT); #endif +#ifdef CONFIG_SYS_CSOR5_EXT + set_ifc_csor_ext(IFC_CS5, CONFIG_SYS_CSOR5_EXT); +#endif #if defined(CONFIG_SYS_CSPR5) && defined(CONFIG_SYS_CSOR5) set_ifc_ftim(IFC_CS5, IFC_FTIM0, CONFIG_SYS_CS5_FTIM0); set_ifc_ftim(IFC_CS5, IFC_FTIM1, CONFIG_SYS_CS5_FTIM1); @@ -113,6 +131,9 @@ void init_early_memctl_regs(void) #ifdef CONFIG_SYS_CSPR6_EXT set_ifc_cspr_ext(IFC_CS6, CONFIG_SYS_CSPR6_EXT); #endif +#ifdef CONFIG_SYS_CSOR6_EXT + set_ifc_csor_ext(IFC_CS6, CONFIG_SYS_CSOR6_EXT); +#endif #if defined(CONFIG_SYS_CSPR6) && defined(CONFIG_SYS_CSOR6) set_ifc_ftim(IFC_CS6, IFC_FTIM0, CONFIG_SYS_CS6_FTIM0); set_ifc_ftim(IFC_CS6, IFC_FTIM1, CONFIG_SYS_CS6_FTIM1); @@ -127,6 +148,9 @@ void init_early_memctl_regs(void) #ifdef CONFIG_SYS_CSPR7_EXT set_ifc_cspr_ext(IFC_CS7, CONFIG_SYS_CSPR7_EXT); #endif +#ifdef CONFIG_SYS_CSOR7_EXT + set_ifc_csor_ext(IFC_CS7, CONFIG_SYS_CSOR7_EXT); +#endif #if defined(CONFIG_SYS_CSPR7) && defined(CONFIG_SYS_CSOR7) set_ifc_ftim(IFC_CS7, IFC_FTIM0, CONFIG_SYS_CS7_FTIM0); set_ifc_ftim(IFC_CS7, IFC_FTIM1, CONFIG_SYS_CS7_FTIM1); diff --git a/drivers/misc/gpio_led.c b/drivers/misc/gpio_led.c index 3fedddc8b5..3e95727d79 100644 --- a/drivers/misc/gpio_led.c +++ b/drivers/misc/gpio_led.c @@ -9,15 +9,42 @@ #include <status_led.h> #include <asm/gpio.h> +#ifndef CONFIG_GPIO_LED_INVERTED_TABLE +#define CONFIG_GPIO_LED_INVERTED_TABLE {} +#endif + +static led_id_t gpio_led_inv[] = CONFIG_GPIO_LED_INVERTED_TABLE; + +static int gpio_led_gpio_value(led_id_t mask, int state) +{ + int i, gpio_value = (state == STATUS_LED_ON); + + for (i = 0; i < ARRAY_SIZE(gpio_led_inv); i++) { + if (gpio_led_inv[i] == mask) + gpio_value = !gpio_value; + } + + return gpio_value; +} + void __led_init(led_id_t mask, int state) { - gpio_request(mask, "gpio_led"); - gpio_direction_output(mask, state == STATUS_LED_ON); + int gpio_value; + + if (gpio_request(mask, "gpio_led") != 0) { + printf("%s: failed requesting GPIO%lu!\n", __func__, mask); + return; + } + + gpio_value = gpio_led_gpio_value(mask, state); + gpio_direction_output(mask, gpio_value); } void __led_set(led_id_t mask, int state) { - gpio_set_value(mask, state == STATUS_LED_ON); + int gpio_value = gpio_led_gpio_value(mask, state); + + gpio_set_value(mask, gpio_value); } void __led_toggle(led_id_t mask) diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index eb1eafaf06..e145cd1842 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -58,6 +58,7 @@ obj-$(CONFIG_NAND_S3C2410) += s3c2410_nand.o obj-$(CONFIG_NAND_SPEAR) += spr_nand.o obj-$(CONFIG_TEGRA_NAND) += tegra_nand.o obj-$(CONFIG_NAND_OMAP_GPMC) += omap_gpmc.o +obj-$(CONFIG_NAND_OMAP_ELM) += omap_elm.o obj-$(CONFIG_NAND_PLAT) += nand_plat.o obj-$(CONFIG_NAND_DOCG4) += docg4.o diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c index 99fc86c8db..05ddfbb644 100644 --- a/drivers/mtd/nand/atmel_nand.c +++ b/drivers/mtd/nand/atmel_nand.c @@ -411,7 +411,7 @@ static int pmecc_err_location(struct mtd_info *mtd) } if (!timeout) { - printk(KERN_ERR "atmel_nand : Timeout to calculate PMECC error location\n"); + dev_err(host->dev, "atmel_nand : Timeout to calculate PMECC error location\n"); return -1; } @@ -451,7 +451,7 @@ static void pmecc_correct_data(struct mtd_info *mtd, uint8_t *buf, uint8_t *ecc, *(buf + byte_pos) ^= (1 << bit_pos); pos = sector_num * host->pmecc_sector_size + byte_pos; - printk(KERN_INFO "Bit flip in data area, byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n", + dev_dbg(host->dev, "Bit flip in data area, byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n", pos, bit_pos, err_byte, *(buf + byte_pos)); } else { /* Bit flip in OOB area */ @@ -461,7 +461,7 @@ static void pmecc_correct_data(struct mtd_info *mtd, uint8_t *buf, uint8_t *ecc, ecc[tmp] ^= (1 << bit_pos); pos = tmp + nand_chip->ecc.layout->eccpos[0]; - printk(KERN_INFO "Bit flip in OOB, oob_byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n", + dev_dbg(host->dev, "Bit flip in OOB, oob_byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n", pos, bit_pos, err_byte, ecc[tmp]); } @@ -499,7 +499,7 @@ normal_check: err_nbr = pmecc_err_location(mtd); if (err_nbr == -1) { - printk(KERN_ERR "PMECC: Too many errors\n"); + dev_err(host->dev, "PMECC: Too many errors\n"); mtd->ecc_stats.failed++; return -EIO; } else { @@ -543,7 +543,7 @@ static int atmel_nand_pmecc_read_page(struct mtd_info *mtd, } if (!timeout) { - printk(KERN_ERR "atmel_nand : Timeout to read PMECC page\n"); + dev_err(host->dev, "atmel_nand : Timeout to read PMECC page\n"); return -1; } @@ -583,7 +583,7 @@ static int atmel_nand_pmecc_write_page(struct mtd_info *mtd, } if (!timeout) { - printk(KERN_ERR "atmel_nand : Timeout to read PMECC status, fail to write PMECC in oob\n"); + dev_err(host->dev, "atmel_nand : Timeout to read PMECC status, fail to write PMECC in oob\n"); goto out; } @@ -826,6 +826,7 @@ static int atmel_pmecc_nand_init_params(struct nand_chip *nand, switch (mtd->writesize) { case 2048: case 4096: + case 8192: host->pmecc_degree = (sector_size == 512) ? PMECC_GF_DIMENSION_13 : PMECC_GF_DIMENSION_14; host->pmecc_cw_len = (1 << host->pmecc_degree) - 1; @@ -839,8 +840,15 @@ static int atmel_pmecc_nand_init_params(struct nand_chip *nand, nand->ecc.steps = 1; nand->ecc.bytes = host->pmecc_bytes_per_sector * host->pmecc_sector_number; + + if (nand->ecc.bytes > MTD_MAX_ECCPOS_ENTRIES_LARGE) { + dev_err(host->dev, "too large eccpos entries. max support ecc.bytes is %d\n", + MTD_MAX_ECCPOS_ENTRIES_LARGE); + return -EINVAL; + } + if (nand->ecc.bytes > mtd->oobsize - 2) { - printk(KERN_ERR "No room for ECC bytes\n"); + dev_err(host->dev, "No room for ECC bytes\n"); return -EINVAL; } pmecc_config_ecc_layout(&atmel_pmecc_oobinfo, @@ -851,7 +859,7 @@ static int atmel_pmecc_nand_init_params(struct nand_chip *nand, case 512: case 1024: /* TODO */ - printk(KERN_ERR "Unsupported page size for PMECC, use Software ECC\n"); + dev_err(host->dev, "Unsupported page size for PMECC, use Software ECC\n"); default: /* page size not handled by HW ECC */ /* switching back to soft ECC */ @@ -1034,7 +1042,7 @@ static int atmel_nand_correct(struct mtd_info *mtd, u_char *dat, /* it doesn't seems to be a freshly * erased block. * We can't correct so many errors */ - printk(KERN_WARNING "atmel_nand : multiple errors detected." + dev_warn(host->dev, "atmel_nand : multiple errors detected." " Unable to correct.\n"); return -EIO; } @@ -1044,12 +1052,12 @@ static int atmel_nand_correct(struct mtd_info *mtd, u_char *dat, /* there's nothing much to do here. * the bit error is on the ECC itself. */ - printk(KERN_WARNING "atmel_nand : one bit error on ECC code." + dev_warn(host->dev, "atmel_nand : one bit error on ECC code." " Nothing to correct\n"); return 0; } - printk(KERN_WARNING "atmel_nand : one bit error on data." + dev_warn(host->dev, "atmel_nand : one bit error on data." " (word offset in the page :" " 0x%x bit offset : 0x%x)\n", ecc_word, ecc_bit); @@ -1061,7 +1069,7 @@ static int atmel_nand_correct(struct mtd_info *mtd, u_char *dat, /* 8 bits words */ dat[ecc_word] ^= (1 << ecc_bit); } - printk(KERN_WARNING "atmel_nand : error corrected\n"); + dev_warn(host->dev, "atmel_nand : error corrected\n"); return 1; } @@ -1176,7 +1184,11 @@ int atmel_nand_chip_init(int devnum, ulong base_addr) mtd->priv = nand; nand->IO_ADDR_R = nand->IO_ADDR_W = (void __iomem *)base_addr; +#ifdef CONFIG_NAND_ECC_BCH + nand->ecc.mode = NAND_ECC_SOFT_BCH; +#else nand->ecc.mode = NAND_ECC_SOFT; +#endif #ifdef CONFIG_SYS_NAND_DBW_16 nand->options = NAND_BUSWIDTH_16; #endif @@ -1184,7 +1196,7 @@ int atmel_nand_chip_init(int devnum, ulong base_addr) #ifdef CONFIG_SYS_NAND_READY_PIN nand->dev_ready = at91_nand_ready; #endif - nand->chip_delay = 20; + nand->chip_delay = 75; ret = nand_scan_ident(mtd, CONFIG_SYS_NAND_MAX_CHIPS, NULL); if (ret) @@ -1212,6 +1224,6 @@ void board_nand_init(void) int i; for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++) if (atmel_nand_chip_init(i, base_addr[i])) - printk(KERN_ERR "atmel_nand: Fail to initialize #%d chip", + dev_err(host->dev, "atmel_nand: Fail to initialize #%d chip", i); } diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c index 98a09c0641..1808a7ffba 100644 --- a/drivers/mtd/nand/fsl_ifc_nand.c +++ b/drivers/mtd/nand/fsl_ifc_nand.c @@ -17,7 +17,7 @@ #include <asm/io.h> #include <asm/errno.h> -#include <asm/fsl_ifc.h> +#include <fsl_ifc.h> #define FSL_IFC_V1_1_0 0x01010000 #define MAX_BANKS 4 @@ -125,6 +125,69 @@ static struct nand_ecclayout oob_4096_ecc8 = { .oobfree = { {2, 6}, {136, 82} }, }; +/* 8192-byte page size with 4-bit ECC */ +static struct nand_ecclayout oob_8192_ecc4 = { + .eccbytes = 128, + .eccpos = { + 8, 9, 10, 11, 12, 13, 14, 15, + 16, 17, 18, 19, 20, 21, 22, 23, + 24, 25, 26, 27, 28, 29, 30, 31, + 32, 33, 34, 35, 36, 37, 38, 39, + 40, 41, 42, 43, 44, 45, 46, 47, + 48, 49, 50, 51, 52, 53, 54, 55, + 56, 57, 58, 59, 60, 61, 62, 63, + 64, 65, 66, 67, 68, 69, 70, 71, + 72, 73, 74, 75, 76, 77, 78, 79, + 80, 81, 82, 83, 84, 85, 86, 87, + 88, 89, 90, 91, 92, 93, 94, 95, + 96, 97, 98, 99, 100, 101, 102, 103, + 104, 105, 106, 107, 108, 109, 110, 111, + 112, 113, 114, 115, 116, 117, 118, 119, + 120, 121, 122, 123, 124, 125, 126, 127, + 128, 129, 130, 131, 132, 133, 134, 135, + }, + .oobfree = { {2, 6}, {136, 208} }, +}; + +/* 8192-byte page size with 8-bit ECC -- requires 218-byte OOB */ +static struct nand_ecclayout oob_8192_ecc8 = { + .eccbytes = 256, + .eccpos = { + 8, 9, 10, 11, 12, 13, 14, 15, + 16, 17, 18, 19, 20, 21, 22, 23, + 24, 25, 26, 27, 28, 29, 30, 31, + 32, 33, 34, 35, 36, 37, 38, 39, + 40, 41, 42, 43, 44, 45, 46, 47, + 48, 49, 50, 51, 52, 53, 54, 55, + 56, 57, 58, 59, 60, 61, 62, 63, + 64, 65, 66, 67, 68, 69, 70, 71, + 72, 73, 74, 75, 76, 77, 78, 79, + 80, 81, 82, 83, 84, 85, 86, 87, + 88, 89, 90, 91, 92, 93, 94, 95, + 96, 97, 98, 99, 100, 101, 102, 103, + 104, 105, 106, 107, 108, 109, 110, 111, + 112, 113, 114, 115, 116, 117, 118, 119, + 120, 121, 122, 123, 124, 125, 126, 127, + 128, 129, 130, 131, 132, 133, 134, 135, + 136, 137, 138, 139, 140, 141, 142, 143, + 144, 145, 146, 147, 148, 149, 150, 151, + 152, 153, 154, 155, 156, 157, 158, 159, + 160, 161, 162, 163, 164, 165, 166, 167, + 168, 169, 170, 171, 172, 173, 174, 175, + 176, 177, 178, 179, 180, 181, 182, 183, + 184, 185, 186, 187, 188, 189, 190, 191, + 192, 193, 194, 195, 196, 197, 198, 199, + 200, 201, 202, 203, 204, 205, 206, 207, + 208, 209, 210, 211, 212, 213, 214, 215, + 216, 217, 218, 219, 220, 221, 222, 223, + 224, 225, 226, 227, 228, 229, 230, 231, + 232, 233, 234, 235, 236, 237, 238, 239, + 240, 241, 242, 243, 244, 245, 246, 247, + 248, 249, 250, 251, 252, 253, 254, 255, + 256, 257, 258, 259, 260, 261, 262, 263, + }, + .oobfree = { {2, 6}, {264, 80} }, +}; /* * Generic flash bbt descriptors @@ -428,20 +491,27 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command, if (mtd->writesize > 512) { nand_fcr0 = (NAND_CMD_SEQIN << IFC_NAND_FCR0_CMD0_SHIFT) | - (NAND_CMD_PAGEPROG << IFC_NAND_FCR0_CMD1_SHIFT); + (NAND_CMD_STATUS << IFC_NAND_FCR0_CMD1_SHIFT) | + (NAND_CMD_PAGEPROG << IFC_NAND_FCR0_CMD2_SHIFT); out_be32(&ifc->ifc_nand.nand_fir0, (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) | (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) | (IFC_FIR_OP_WBCD << IFC_NAND_FIR0_OP3_SHIFT) | - (IFC_FIR_OP_CW1 << IFC_NAND_FIR0_OP4_SHIFT)); - out_be32(&ifc->ifc_nand.nand_fir1, 0); + (IFC_FIR_OP_CMD2 << IFC_NAND_FIR0_OP4_SHIFT)); + out_be32(&ifc->ifc_nand.nand_fir1, + (IFC_FIR_OP_CW1 << IFC_NAND_FIR1_OP5_SHIFT) | + (IFC_FIR_OP_RDSTAT << + IFC_NAND_FIR1_OP6_SHIFT) | + (IFC_FIR_OP_NOP << IFC_NAND_FIR1_OP7_SHIFT)); } else { nand_fcr0 = ((NAND_CMD_PAGEPROG << IFC_NAND_FCR0_CMD1_SHIFT) | (NAND_CMD_SEQIN << - IFC_NAND_FCR0_CMD2_SHIFT)); + IFC_NAND_FCR0_CMD2_SHIFT) | + (NAND_CMD_STATUS << + IFC_NAND_FCR0_CMD3_SHIFT)); out_be32(&ifc->ifc_nand.nand_fir0, (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | @@ -450,7 +520,11 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command, (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP3_SHIFT) | (IFC_FIR_OP_WBCD << IFC_NAND_FIR0_OP4_SHIFT)); out_be32(&ifc->ifc_nand.nand_fir1, - (IFC_FIR_OP_CW1 << IFC_NAND_FIR1_OP5_SHIFT)); + (IFC_FIR_OP_CMD1 << IFC_NAND_FIR1_OP5_SHIFT) | + (IFC_FIR_OP_CW3 << IFC_NAND_FIR1_OP6_SHIFT) | + (IFC_FIR_OP_RDSTAT << + IFC_NAND_FIR1_OP7_SHIFT) | + (IFC_FIR_OP_NOP << IFC_NAND_FIR1_OP8_SHIFT)); if (column >= mtd->writesize) nand_fcr0 |= @@ -902,6 +976,21 @@ static int fsl_ifc_chip_init(int devnum, u8 *addr) priv->bufnum_mask = 1; break; + case CSOR_NAND_PGS_8K: + if ((csor & CSOR_NAND_ECC_MODE_MASK) == + CSOR_NAND_ECC_MODE_4) { + layout = &oob_8192_ecc4; + nand->ecc.strength = 4; + } else { + layout = &oob_8192_ecc8; + nand->ecc.strength = 8; + nand->ecc.bytes = 16; + } + + priv->bufnum_mask = 0; + break; + + default: printf("ifc nand: bad csor %#x: bad page size\n", csor); return -ENODEV; diff --git a/drivers/mtd/nand/fsl_ifc_spl.c b/drivers/mtd/nand/fsl_ifc_spl.c index d4622653fa..9de327ba4d 100644 --- a/drivers/mtd/nand/fsl_ifc_spl.c +++ b/drivers/mtd/nand/fsl_ifc_spl.c @@ -9,7 +9,7 @@ #include <common.h> #include <asm/io.h> -#include <asm/fsl_ifc.h> +#include <fsl_ifc.h> #include <linux/mtd/nand.h> static inline int is_blank(uchar *addr, int page_size) @@ -112,10 +112,13 @@ static void nand_load(unsigned int offs, int uboot_size, uchar *dst) port_size = (cspr & CSPR_PORT_SIZE_16) ? 16 : 8; - if (csor & CSOR_NAND_PGS_4K) { + if ((csor & CSOR_NAND_PGS_MASK) == CSOR_NAND_PGS_8K) { + page_size = 8192; + bufnum_mask = 0x0; + } else if ((csor & CSOR_NAND_PGS_MASK) == CSOR_NAND_PGS_4K) { page_size = 4096; bufnum_mask = 0x1; - } else if (csor & CSOR_NAND_PGS_2K) { + } else if ((csor & CSOR_NAND_PGS_MASK) == CSOR_NAND_PGS_2K) { page_size = 2048; bufnum_mask = 0x3; } else { diff --git a/arch/arm/cpu/armv7/am33xx/elm.c b/drivers/mtd/nand/omap_elm.c index 8f1d6afdd3..2aa7807f3e 100644 --- a/arch/arm/cpu/armv7/am33xx/elm.c +++ b/drivers/mtd/nand/omap_elm.c @@ -18,7 +18,7 @@ #include <asm/errno.h> #include <asm/arch/cpu.h> #include <asm/omap_gpmc.h> -#include <asm/arch/elm.h> +#include <asm/omap_elm.h> #define ELM_DEFAULT_POLY (0) @@ -127,7 +127,7 @@ int elm_check_error(u8 *syndrome, u32 nibbles, u32 *error_count, for (i = 0; i < *error_count; i++) { error_locations[i] = - readl(&elm_cfg->error_location[poly].error_location_x[i]); + readl(&elm_cfg->error_location[poly].error_location_x[i]); } return 0; @@ -175,7 +175,7 @@ void elm_reset(void) { /* initiate reset */ writel((readl(&elm_cfg->sysconfig) | ELM_SYSCONFIG_SOFTRESET), - &elm_cfg->sysconfig); + &elm_cfg->sysconfig); /* wait for reset complete and normal operation */ while ((readl(&elm_cfg->sysstatus) & ELM_SYSSTATUS_RESETDONE) != diff --git a/drivers/mtd/nand/omap_gpmc.c b/drivers/mtd/nand/omap_gpmc.c index ec1787f224..5e7e6b3375 100644 --- a/drivers/mtd/nand/omap_gpmc.c +++ b/drivers/mtd/nand/omap_gpmc.c @@ -15,15 +15,13 @@ #include <linux/bch.h> #include <linux/compiler.h> #include <nand.h> -#ifdef CONFIG_AM33XX -#include <asm/arch/elm.h> -#endif +#include <asm/omap_elm.h> + +#define BADBLOCK_MARKER_LENGTH 2 +#define SECTOR_BYTES 512 static uint8_t cs; -static __maybe_unused struct nand_ecclayout hw_nand_oob = - GPMC_NAND_HW_ECC_LAYOUT; -static __maybe_unused struct nand_ecclayout hw_bch8_nand_oob = - GPMC_NAND_HW_BCH8_ECC_LAYOUT; +static __maybe_unused struct nand_ecclayout omap_ecclayout; /* * omap_nand_hwcontrol - Set the address pointers corretly for the @@ -233,6 +231,7 @@ struct nand_bch_priv { uint8_t type; uint8_t nibbles; struct bch_control *control; + enum omap_ecc ecc_scheme; }; /* bch types */ @@ -274,17 +273,15 @@ static void omap_hwecc_init_bch(struct nand_chip *chip, int32_t mode) { uint32_t val; uint32_t dev_width = (chip->options & NAND_BUSWIDTH_16) >> 1; -#ifdef CONFIG_AM33XX uint32_t unused_length = 0; -#endif uint32_t wr_mode = BCH_WRAPMODE_6; struct nand_bch_priv *bch = chip->priv; /* Clear the ecc result registers, select ecc reg as 1 */ writel(ECCCLEAR | ECCRESULTREG1, &gpmc_cfg->ecc_control); -#ifdef CONFIG_AM33XX - wr_mode = BCH_WRAPMODE_1; + if (bch->ecc_scheme == OMAP_ECC_BCH8_CODE_HW) { + wr_mode = BCH_WRAPMODE_1; switch (bch->nibbles) { case ECC_BCH4_NIBBLES: @@ -320,7 +317,7 @@ static void omap_hwecc_init_bch(struct nand_chip *chip, int32_t mode) val |= (unused_length << 22); break; } -#else + } else { /* * This ecc_size_config setting is for BCH sw library. * @@ -333,7 +330,7 @@ static void omap_hwecc_init_bch(struct nand_chip *chip, int32_t mode) * size1 = 32 (skip 32 nibbles = 16 bytes per sector in spare area) */ val = (32 << 22) | (0 << 12); -#endif + } /* ecc size configuration */ writel(val, &gpmc_cfg->ecc_size_config); @@ -376,9 +373,9 @@ static void __maybe_unused omap_ecc_disable(struct mtd_info *mtd) } /* - * BCH8 support (needs ELM and thus AM33xx-only) + * BCH support using ELM module */ -#ifdef CONFIG_AM33XX +#ifdef CONFIG_NAND_OMAP_ELM /* * omap_read_bch8_result - Read BCH result for BCH8 level * @@ -631,20 +628,20 @@ static int omap_read_page_bch(struct mtd_info *mtd, struct nand_chip *chip, } return 0; } -#endif /* CONFIG_AM33XX */ +#endif /* CONFIG_NAND_OMAP_ELM */ /* * OMAP3 BCH8 support (with BCH library) */ -#ifdef CONFIG_NAND_OMAP_BCH8 +#ifdef CONFIG_BCH /* - * omap_calculate_ecc_bch - Read BCH ECC result + * omap_calculate_ecc_bch_sw - Read BCH ECC result * * @mtd: MTD device structure * @dat: The pointer to data on which ecc is computed (unused here) * @ecc: The ECC output buffer */ -static int omap_calculate_ecc_bch(struct mtd_info *mtd, const uint8_t *dat, +static int omap_calculate_ecc_bch_sw(struct mtd_info *mtd, const uint8_t *dat, uint8_t *ecc) { int ret = 0; @@ -689,13 +686,13 @@ static int omap_calculate_ecc_bch(struct mtd_info *mtd, const uint8_t *dat, } /** - * omap_correct_data_bch - Decode received data and correct errors + * omap_correct_data_bch_sw - Decode received data and correct errors * @mtd: MTD device structure * @data: page data * @read_ecc: ecc read from nand flash * @calc_ecc: ecc read from HW ECC registers */ -static int omap_correct_data_bch(struct mtd_info *mtd, u_char *data, +static int omap_correct_data_bch_sw(struct mtd_info *mtd, u_char *data, u_char *read_ecc, u_char *calc_ecc) { int i, count; @@ -752,7 +749,150 @@ static void __maybe_unused omap_free_bch(struct mtd_info *mtd) chip_priv->control = NULL; } } -#endif /* CONFIG_NAND_OMAP_BCH8 */ +#endif /* CONFIG_BCH */ + +/** + * omap_select_ecc_scheme - configures driver for particular ecc-scheme + * @nand: NAND chip device structure + * @ecc_scheme: ecc scheme to configure + * @pagesize: number of main-area bytes per page of NAND device + * @oobsize: number of OOB/spare bytes per page of NAND device + */ +static int omap_select_ecc_scheme(struct nand_chip *nand, + enum omap_ecc ecc_scheme, unsigned int pagesize, unsigned int oobsize) { + struct nand_bch_priv *bch = nand->priv; + struct nand_ecclayout *ecclayout = nand->ecc.layout; + int eccsteps = pagesize / SECTOR_BYTES; + int i; + + switch (ecc_scheme) { + case OMAP_ECC_HAM1_CODE_SW: + debug("nand: selected OMAP_ECC_HAM1_CODE_SW\n"); + /* For this ecc-scheme, ecc.bytes, ecc.layout, ... are + * initialized in nand_scan_tail(), so just set ecc.mode */ + bch_priv.control = NULL; + bch_priv.type = 0; + nand->ecc.mode = NAND_ECC_SOFT; + nand->ecc.layout = NULL; + nand->ecc.size = pagesize; + bch->ecc_scheme = OMAP_ECC_HAM1_CODE_SW; + break; + + case OMAP_ECC_HAM1_CODE_HW: + debug("nand: selected OMAP_ECC_HAM1_CODE_HW\n"); + /* check ecc-scheme requirements before updating ecc info */ + if ((3 * eccsteps) + BADBLOCK_MARKER_LENGTH > oobsize) { + printf("nand: error: insufficient OOB: require=%d\n", ( + (3 * eccsteps) + BADBLOCK_MARKER_LENGTH)); + return -EINVAL; + } + bch_priv.control = NULL; + bch_priv.type = 0; + /* populate ecc specific fields */ + nand->ecc.mode = NAND_ECC_HW; + nand->ecc.strength = 1; + nand->ecc.size = SECTOR_BYTES; + nand->ecc.bytes = 3; + nand->ecc.hwctl = omap_enable_hwecc; + nand->ecc.correct = omap_correct_data; + nand->ecc.calculate = omap_calculate_ecc; + /* define ecc-layout */ + ecclayout->eccbytes = nand->ecc.bytes * eccsteps; + for (i = 0; i < ecclayout->eccbytes; i++) + ecclayout->eccpos[i] = i + BADBLOCK_MARKER_LENGTH; + ecclayout->oobfree[0].offset = i + BADBLOCK_MARKER_LENGTH; + ecclayout->oobfree[0].length = oobsize - ecclayout->eccbytes - + BADBLOCK_MARKER_LENGTH; + bch->ecc_scheme = OMAP_ECC_HAM1_CODE_HW; + break; + + case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW: +#ifdef CONFIG_BCH + debug("nand: selected OMAP_ECC_BCH8_CODE_HW_DETECTION_SW\n"); + /* check ecc-scheme requirements before updating ecc info */ + if ((13 * eccsteps) + BADBLOCK_MARKER_LENGTH > oobsize) { + printf("nand: error: insufficient OOB: require=%d\n", ( + (13 * eccsteps) + BADBLOCK_MARKER_LENGTH)); + return -EINVAL; + } + /* check if BCH S/W library can be used for error detection */ + bch_priv.control = init_bch(13, 8, 0x201b); + if (!bch_priv.control) { + printf("nand: error: could not init_bch()\n"); + return -ENODEV; + } + bch_priv.type = ECC_BCH8; + /* populate ecc specific fields */ + nand->ecc.mode = NAND_ECC_HW; + nand->ecc.strength = 8; + nand->ecc.size = SECTOR_BYTES; + nand->ecc.bytes = 13; + nand->ecc.hwctl = omap_enable_ecc_bch; + nand->ecc.correct = omap_correct_data_bch_sw; + nand->ecc.calculate = omap_calculate_ecc_bch_sw; + /* define ecc-layout */ + ecclayout->eccbytes = nand->ecc.bytes * eccsteps; + ecclayout->eccpos[0] = BADBLOCK_MARKER_LENGTH; + for (i = 1; i < ecclayout->eccbytes; i++) { + if (i % nand->ecc.bytes) + ecclayout->eccpos[i] = + ecclayout->eccpos[i - 1] + 1; + else + ecclayout->eccpos[i] = + ecclayout->eccpos[i - 1] + 2; + } + ecclayout->oobfree[0].offset = i + BADBLOCK_MARKER_LENGTH; + ecclayout->oobfree[0].length = oobsize - ecclayout->eccbytes - + BADBLOCK_MARKER_LENGTH; + omap_hwecc_init_bch(nand, NAND_ECC_READ); + bch->ecc_scheme = OMAP_ECC_BCH8_CODE_HW_DETECTION_SW; + break; +#else + printf("nand: error: CONFIG_BCH required for ECC\n"); + return -EINVAL; +#endif + + case OMAP_ECC_BCH8_CODE_HW: +#ifdef CONFIG_NAND_OMAP_ELM + debug("nand: selected OMAP_ECC_BCH8_CODE_HW\n"); + /* check ecc-scheme requirements before updating ecc info */ + if ((14 * eccsteps) + BADBLOCK_MARKER_LENGTH > oobsize) { + printf("nand: error: insufficient OOB: require=%d\n", ( + (14 * eccsteps) + BADBLOCK_MARKER_LENGTH)); + return -EINVAL; + } + /* intialize ELM for ECC error detection */ + elm_init(); + bch_priv.type = ECC_BCH8; + /* populate ecc specific fields */ + nand->ecc.mode = NAND_ECC_HW; + nand->ecc.strength = 8; + nand->ecc.size = SECTOR_BYTES; + nand->ecc.bytes = 14; + nand->ecc.hwctl = omap_enable_ecc_bch; + nand->ecc.correct = omap_correct_data_bch; + nand->ecc.calculate = omap_calculate_ecc_bch; + nand->ecc.read_page = omap_read_page_bch; + /* define ecc-layout */ + ecclayout->eccbytes = nand->ecc.bytes * eccsteps; + for (i = 0; i < ecclayout->eccbytes; i++) + ecclayout->eccpos[i] = i + BADBLOCK_MARKER_LENGTH; + ecclayout->oobfree[0].offset = i + BADBLOCK_MARKER_LENGTH; + ecclayout->oobfree[0].length = oobsize - ecclayout->eccbytes - + BADBLOCK_MARKER_LENGTH; + bch->ecc_scheme = OMAP_ECC_BCH8_CODE_HW; + break; +#else + printf("nand: error: CONFIG_NAND_OMAP_ELM required for ECC\n"); + return -EINVAL; +#endif + + default: + debug("nand: error: ecc scheme not enabled or supported\n"); + return -EINVAL; + } + return 0; +} #ifndef CONFIG_SPL_BUILD /* @@ -763,77 +903,45 @@ static void __maybe_unused omap_free_bch(struct mtd_info *mtd) * @eccstrength - the number of bits that could be corrected * (1 - hamming, 4 - BCH4, 8 - BCH8, 16 - BCH16) */ -void omap_nand_switch_ecc(uint32_t hardware, uint32_t eccstrength) +int __maybe_unused omap_nand_switch_ecc(uint32_t hardware, uint32_t eccstrength) { struct nand_chip *nand; struct mtd_info *mtd; + int err = 0; if (nand_curr_device < 0 || nand_curr_device >= CONFIG_SYS_MAX_NAND_DEVICE || !nand_info[nand_curr_device].name) { - printf("Error: Can't switch ecc, no devices available\n"); - return; + printf("nand: error: no NAND devices found\n"); + return -ENODEV; } mtd = &nand_info[nand_curr_device]; nand = mtd->priv; - nand->options |= NAND_OWN_BUFFERS; - - /* Reset ecc interface */ - nand->ecc.mode = NAND_ECC_NONE; - nand->ecc.read_page = NULL; - nand->ecc.write_page = NULL; - nand->ecc.read_oob = NULL; - nand->ecc.write_oob = NULL; - nand->ecc.hwctl = NULL; - nand->ecc.correct = NULL; - nand->ecc.calculate = NULL; - nand->ecc.strength = eccstrength; - /* Setup the ecc configurations again */ if (hardware) { if (eccstrength == 1) { - nand->ecc.mode = NAND_ECC_HW; - nand->ecc.layout = &hw_nand_oob; - nand->ecc.size = 512; - nand->ecc.bytes = 3; - nand->ecc.hwctl = omap_enable_hwecc; - nand->ecc.correct = omap_correct_data; - nand->ecc.calculate = omap_calculate_ecc; - omap_hwecc_init(nand); - printf("1-bit hamming HW ECC selected\n"); - } -#if defined(CONFIG_AM33XX) || defined(CONFIG_NAND_OMAP_BCH8) - else if (eccstrength == 8) { - nand->ecc.mode = NAND_ECC_HW; - nand->ecc.layout = &hw_bch8_nand_oob; - nand->ecc.size = 512; -#ifdef CONFIG_AM33XX - nand->ecc.bytes = 14; - nand->ecc.read_page = omap_read_page_bch; -#else - nand->ecc.bytes = 13; -#endif - nand->ecc.hwctl = omap_enable_ecc_bch; - nand->ecc.correct = omap_correct_data_bch; - nand->ecc.calculate = omap_calculate_ecc_bch; - omap_hwecc_init_bch(nand, NAND_ECC_READ); - printf("8-bit BCH HW ECC selected\n"); + err = omap_select_ecc_scheme(nand, + OMAP_ECC_HAM1_CODE_HW, + mtd->writesize, mtd->oobsize); + } else if (eccstrength == 8) { + err = omap_select_ecc_scheme(nand, + OMAP_ECC_BCH8_CODE_HW, + mtd->writesize, mtd->oobsize); + } else { + printf("nand: error: unsupported ECC scheme\n"); + return -EINVAL; } -#endif } else { - nand->ecc.mode = NAND_ECC_SOFT; - /* Use mtd default settings */ - nand->ecc.layout = NULL; - nand->ecc.size = 0; - printf("SW ECC selected\n"); + err = omap_select_ecc_scheme(nand, OMAP_ECC_HAM1_CODE_SW, + mtd->writesize, mtd->oobsize); } /* Update NAND handling after ECC mode switch */ - nand_scan_tail(mtd); - - nand->options &= ~NAND_OWN_BUFFERS; + if (!err) + err = nand_scan_tail(mtd); + return err; } #endif /* CONFIG_SPL_BUILD */ @@ -856,7 +964,7 @@ int board_nand_init(struct nand_chip *nand) { int32_t gpmc_config = 0; cs = 0; - + int err = 0; /* * xloader/Uboot's gpmc configuration would have configured GPMC for * nand type of memory. The following logic scans and latches on to the @@ -873,7 +981,7 @@ int board_nand_init(struct nand_chip *nand) cs++; } if (cs >= GPMC_MAX_CS) { - printf("NAND: Unable to find NAND settings in " + printf("nand: error: Unable to find NAND settings in " "GPMC Configuration - quitting\n"); return -ENODEV; } @@ -885,64 +993,27 @@ int board_nand_init(struct nand_chip *nand) nand->IO_ADDR_R = (void __iomem *)&gpmc_cfg->cs[cs].nand_dat; nand->IO_ADDR_W = (void __iomem *)&gpmc_cfg->cs[cs].nand_cmd; - - nand->cmd_ctrl = omap_nand_hwcontrol; - nand->options = NAND_NO_PADDING | NAND_CACHEPRG; + nand->priv = &bch_priv; + nand->cmd_ctrl = omap_nand_hwcontrol; + nand->options |= NAND_NO_PADDING | NAND_CACHEPRG; /* If we are 16 bit dev, our gpmc config tells us that */ if ((readl(&gpmc_cfg->cs[cs].config1) & 0x3000) == 0x1000) nand->options |= NAND_BUSWIDTH_16; nand->chip_delay = 100; + nand->ecc.layout = &omap_ecclayout; -#if defined(CONFIG_AM33XX) || defined(CONFIG_NAND_OMAP_BCH8) -#ifdef CONFIG_AM33XX - /* AM33xx uses the ELM */ - /* required in case of BCH */ - elm_init(); -#else - /* - * Whereas other OMAP based SoC do not have the ELM, they use the BCH - * SW library. - */ - bch_priv.control = init_bch(13, 8, 0x201b /* hw polynominal */); - if (!bch_priv.control) { - puts("Could not init_bch()\n"); - return -ENODEV; - } -#endif - /* BCH info that will be correct for SPL or overridden otherwise. */ - nand->priv = &bch_priv; -#endif - - /* Default ECC mode */ -#if defined(CONFIG_AM33XX) || defined(CONFIG_NAND_OMAP_BCH8) - nand->ecc.mode = NAND_ECC_HW; - nand->ecc.layout = &hw_bch8_nand_oob; - nand->ecc.size = CONFIG_SYS_NAND_ECCSIZE; - nand->ecc.bytes = CONFIG_SYS_NAND_ECCBYTES; - nand->ecc.strength = 8; - nand->ecc.hwctl = omap_enable_ecc_bch; - nand->ecc.correct = omap_correct_data_bch; - nand->ecc.calculate = omap_calculate_ecc_bch; -#ifdef CONFIG_AM33XX - nand->ecc.read_page = omap_read_page_bch; -#endif - omap_hwecc_init_bch(nand, NAND_ECC_READ); -#else -#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_NAND_SOFTECC) - nand->ecc.mode = NAND_ECC_SOFT; + /* select ECC scheme */ +#if defined(CONFIG_NAND_OMAP_ECCSCHEME) + err = omap_select_ecc_scheme(nand, CONFIG_NAND_OMAP_ECCSCHEME, + CONFIG_SYS_NAND_PAGE_SIZE, CONFIG_SYS_NAND_OOBSIZE); #else - nand->ecc.mode = NAND_ECC_HW; - nand->ecc.layout = &hw_nand_oob; - nand->ecc.size = CONFIG_SYS_NAND_ECCSIZE; - nand->ecc.bytes = CONFIG_SYS_NAND_ECCBYTES; - nand->ecc.hwctl = omap_enable_hwecc; - nand->ecc.correct = omap_correct_data; - nand->ecc.calculate = omap_calculate_ecc; - nand->ecc.strength = 1; - omap_hwecc_init(nand); -#endif + /* pagesize and oobsize are not required to configure sw ecc-scheme */ + err = omap_select_ecc_scheme(nand, OMAP_ECC_HAM1_CODE_SW, + 0, 0); #endif + if (err) + return err; #ifdef CONFIG_SPL_BUILD if (nand->options & NAND_BUSWIDTH_16) diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c index 067f8ef184..979e4af7c5 100644 --- a/drivers/mtd/onenand/onenand_base.c +++ b/drivers/mtd/onenand/onenand_base.c @@ -761,7 +761,8 @@ static int onenand_transfer_auto_oob(struct mtd_info *mtd, uint8_t *buf, uint8_t *oob_buf = this->oob_buf; free = this->ecclayout->oobfree; - for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free->length; i++, free++) { + for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES_LARGE && free->length; + i++, free++) { if (readcol >= lastgap) readcol += free->offset - lastgap; if (readend >= lastgap) @@ -770,7 +771,8 @@ static int onenand_transfer_auto_oob(struct mtd_info *mtd, uint8_t *buf, } this->read_bufferram(mtd, 0, ONENAND_SPARERAM, oob_buf, 0, mtd->oobsize); free = this->ecclayout->oobfree; - for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free->length; i++, free++) { + for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES_LARGE && free->length; + i++, free++) { int free_end = free->offset + free->length; if (free->offset < readend && free_end > readcol) { int st = max_t(int,free->offset,readcol); @@ -1356,7 +1358,8 @@ static int onenand_fill_auto_oob(struct mtd_info *mtd, u_char *oob_buf, unsigned int i; free = this->ecclayout->oobfree; - for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free->length; i++, free++) { + for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES_LARGE && free->length; + i++, free++) { if (writecol >= lastgap) writecol += free->offset - lastgap; if (writeend >= lastgap) @@ -1364,7 +1367,8 @@ static int onenand_fill_auto_oob(struct mtd_info *mtd, u_char *oob_buf, lastgap = free->offset + free->length; } free = this->ecclayout->oobfree; - for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free->length; i++, free++) { + for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES_LARGE && free->length; + i++, free++) { int free_end = free->offset + free->length; if (free->offset < writeend && free_end > writecol) { int st = max_t(int,free->offset,writecol); @@ -2750,7 +2754,8 @@ int onenand_scan(struct mtd_info *mtd, int maxchips) * the out of band area */ this->ecclayout->oobavail = 0; - for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && + + for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES_LARGE && this->ecclayout->oobfree[i].length; i++) this->ecclayout->oobavail += this->ecclayout->oobfree[i].length; diff --git a/drivers/net/designware.c b/drivers/net/designware.c index 8413d57767..22155b4d94 100644 --- a/drivers/net/designware.c +++ b/drivers/net/designware.c @@ -96,7 +96,7 @@ static int mac_reset(struct eth_device *dev) ulong start; int timeout = CONFIG_MACRESET_TIMEOUT; - writel(DMAMAC_SRST, &dma_p->busmode); + writel(readl(&dma_p->busmode) | DMAMAC_SRST, &dma_p->busmode); if (priv->interface != PHY_INTERFACE_MODE_RGMII) writel(MII_PORTSELECT, &mac_p->conf); diff --git a/drivers/net/designware.h b/drivers/net/designware.h index e80002a0e4..5440c9215f 100644 --- a/drivers/net/designware.h +++ b/drivers/net/designware.h @@ -112,7 +112,7 @@ struct dmamacdescr { u32 dmamac_cntl; void *dmamac_addr; struct dmamacdescr *dmamac_next; -}; +} __aligned(16); /* * txrx_status definitions @@ -224,8 +224,7 @@ struct dw_eth_dev { u32 tx_currdescnum; u32 rx_currdescnum; u32 phy_configured; - int link_printed; - u32 padding; + u32 link_printed; struct dmamacdescr tx_mac_descrtable[CONFIG_TX_DESCR_NUM]; struct dmamacdescr rx_mac_descrtable[CONFIG_RX_DESCR_NUM]; @@ -237,7 +236,7 @@ struct dw_eth_dev { struct eth_dma_regs *dma_regs_p; struct eth_device *dev; -} __attribute__ ((aligned(8))); +}; /* Speed specific definitions */ #define SPEED_10M 1 diff --git a/drivers/net/dm9000x.c b/drivers/net/dm9000x.c index f7170e0554..b68d808c74 100644 --- a/drivers/net/dm9000x.c +++ b/drivers/net/dm9000x.c @@ -342,6 +342,15 @@ static int dm9000_init(struct eth_device *dev, bd_t *bd) DM9000_iow(DM9000_ISR, ISR_ROOS | ISR_ROS | ISR_PTS | ISR_PRS); printf("MAC: %pM\n", dev->enetaddr); + if (!is_valid_ether_addr(dev->enetaddr)) { +#ifdef CONFIG_RANDOM_MACADDR + printf("Bad MAC address (uninitialized EEPROM?), randomizing\n"); + eth_random_enetaddr(dev->enetaddr); + printf("MAC: %pM\n", dev->enetaddr); +#else + printf("WARNING: Bad MAC address (uninitialized EEPROM?)\n"); +#endif + } /* fill device MAC address registers */ for (i = 0, oft = DM9000_PAR; i < 6; i++, oft++) diff --git a/drivers/net/e1000.c b/drivers/net/e1000.c index 57aa53dbae..9a66e68ae0 100644 --- a/drivers/net/e1000.c +++ b/drivers/net/e1000.c @@ -114,12 +114,13 @@ static int e1000_write_phy_reg(struct e1000_hw *hw, uint32_t reg_addr, static int32_t e1000_phy_hw_reset(struct e1000_hw *hw); static int e1000_phy_reset(struct e1000_hw *hw); static int e1000_detect_gig_phy(struct e1000_hw *hw); -static void e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw); static void e1000_set_media_type(struct e1000_hw *hw); static int32_t e1000_swfw_sync_acquire(struct e1000_hw *hw, uint16_t mask); static int32_t e1000_check_phy_reset_block(struct e1000_hw *hw); +#ifndef CONFIG_E1000_NO_NVM +static void e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw); static int32_t e1000_read_eeprom(struct e1000_hw *hw, uint16_t offset, uint16_t words, uint16_t *data); @@ -885,6 +886,7 @@ static int e1000_validate_eeprom_checksum(struct e1000_hw *hw) return -E1000_ERR_EEPROM; } +#endif /* CONFIG_E1000_NO_NVM */ /***************************************************************************** * Set PHY to class A mode @@ -897,6 +899,7 @@ static int e1000_validate_eeprom_checksum(struct e1000_hw *hw) static int32_t e1000_set_phy_mode(struct e1000_hw *hw) { +#ifndef CONFIG_E1000_NO_NVM int32_t ret_val; uint16_t eeprom_data; @@ -923,10 +926,11 @@ e1000_set_phy_mode(struct e1000_hw *hw) hw->phy_reset_disable = false; } } - +#endif return E1000_SUCCESS; } +#ifndef CONFIG_E1000_NO_NVM /*************************************************************************** * * Obtaining software semaphore bit (SMBI) before resetting PHY. @@ -965,6 +969,7 @@ e1000_get_software_semaphore(struct e1000_hw *hw) return E1000_SUCCESS; } +#endif /*************************************************************************** * This function clears HW semaphore bits. @@ -977,6 +982,7 @@ e1000_get_software_semaphore(struct e1000_hw *hw) static void e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw) { +#ifndef CONFIG_E1000_NO_NVM uint32_t swsm; DEBUGFUNC(); @@ -991,6 +997,7 @@ e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw) } else swsm &= ~(E1000_SWSM_SWESMBI); E1000_WRITE_REG(hw, SWSM, swsm); +#endif } /*************************************************************************** @@ -1007,6 +1014,7 @@ e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw) static int32_t e1000_get_hw_eeprom_semaphore(struct e1000_hw *hw) { +#ifndef CONFIG_E1000_NO_NVM int32_t timeout; uint32_t swsm; @@ -1043,7 +1051,7 @@ e1000_get_hw_eeprom_semaphore(struct e1000_hw *hw) "SWESMBI bit is set.\n"); return -E1000_ERR_EEPROM; } - +#endif return E1000_SUCCESS; } @@ -1097,6 +1105,7 @@ static bool e1000_is_second_port(struct e1000_hw *hw) } } +#ifndef CONFIG_E1000_NO_NVM /****************************************************************************** * Reads the adapter's MAC address from the EEPROM and inverts the LSB for the * second function of dual function devices @@ -1136,6 +1145,7 @@ e1000_read_mac_addr(struct eth_device *nic) #endif return 0; } +#endif /****************************************************************************** * Initializes receive address filters. @@ -1764,9 +1774,11 @@ static int e1000_setup_link(struct eth_device *nic) { struct e1000_hw *hw = nic->priv; - uint32_t ctrl_ext; int32_t ret_val; +#ifndef CONFIG_E1000_NO_NVM + uint32_t ctrl_ext; uint16_t eeprom_data; +#endif DEBUGFUNC(); @@ -1775,6 +1787,7 @@ e1000_setup_link(struct eth_device *nic) if (e1000_check_phy_reset_block(hw)) return E1000_SUCCESS; +#ifndef CONFIG_E1000_NO_NVM /* Read and store word 0x0F of the EEPROM. This word contains bits * that determine the hardware's default PAUSE (flow control) mode, * a bit that determines whether the HW defaults to enabling or @@ -1788,7 +1801,7 @@ e1000_setup_link(struct eth_device *nic) DEBUGOUT("EEPROM Read Error\n"); return -E1000_ERR_EEPROM; } - +#endif if (hw->fc == e1000_fc_default) { switch (hw->mac_type) { case e1000_ich8lan: @@ -1797,6 +1810,7 @@ e1000_setup_link(struct eth_device *nic) hw->fc = e1000_fc_full; break; default: +#ifndef CONFIG_E1000_NO_NVM ret_val = e1000_read_eeprom(hw, EEPROM_INIT_CONTROL2_REG, 1, &eeprom_data); if (ret_val) { @@ -1809,6 +1823,7 @@ e1000_setup_link(struct eth_device *nic) EEPROM_WORD0F_ASM_DIR) hw->fc = e1000_fc_tx_pause; else +#endif hw->fc = e1000_fc_full; break; } @@ -1828,6 +1843,7 @@ e1000_setup_link(struct eth_device *nic) DEBUGOUT("After fix-ups FlowControl is now = %x\n", hw->fc); +#ifndef CONFIG_E1000_NO_NVM /* Take the 4 bits from EEPROM word 0x0F that determine the initial * polarity value for the SW controlled pins, and setup the * Extended Device Control reg with that info. @@ -1840,6 +1856,7 @@ e1000_setup_link(struct eth_device *nic) SWDPIO__EXT_SHIFT); E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext); } +#endif /* Call the necessary subroutine to configure the link. */ ret_val = (hw->media_type == e1000_media_type_fiber) ? @@ -5196,6 +5213,7 @@ e1000_initialize(bd_t * bis) e1000_reset_hw(hw); list_add_tail(&hw->list_node, &e1000_hw_list); +#ifndef CONFIG_E1000_NO_NVM /* Validate the EEPROM and get chipset information */ #if !defined(CONFIG_MVBC_1G) if (e1000_init_eeprom_params(hw)) { @@ -5206,11 +5224,17 @@ e1000_initialize(bd_t * bis) continue; #endif e1000_read_mac_addr(nic); +#endif e1000_get_bus_type(hw); +#ifndef CONFIG_E1000_NO_NVM printf("e1000: %02x:%02x:%02x:%02x:%02x:%02x\n ", nic->enetaddr[0], nic->enetaddr[1], nic->enetaddr[2], nic->enetaddr[3], nic->enetaddr[4], nic->enetaddr[5]); +#else + memset(nic->enetaddr, 0, 6); + printf("e1000: no NVM\n"); +#endif /* Set up the function pointers and register the device */ nic->init = e1000_init; diff --git a/drivers/net/e1000.h b/drivers/net/e1000.h index 25884f5bc5..ff87af2ef8 100644 --- a/drivers/net/e1000.h +++ b/drivers/net/e1000.h @@ -63,11 +63,14 @@ struct e1000_hw_stats; /* Internal E1000 helper functions */ struct e1000_hw *e1000_find_card(unsigned int cardnum); + +#ifndef CONFIG_E1000_NO_NVM int32_t e1000_acquire_eeprom(struct e1000_hw *hw); void e1000_standby_eeprom(struct e1000_hw *hw); void e1000_release_eeprom(struct e1000_hw *hw); void e1000_raise_ee_clk(struct e1000_hw *hw, uint32_t *eecd); void e1000_lower_ee_clk(struct e1000_hw *hw, uint32_t *eecd); +#endif #ifdef CONFIG_E1000_SPI int do_e1000_spi(cmd_tbl_t *cmdtp, struct e1000_hw *hw, @@ -1019,6 +1022,7 @@ struct e1000_hw_stats { uint64_t tsctfc; }; +#ifndef CONFIG_E1000_NO_NVM struct e1000_eeprom_info { e1000_eeprom_type type; uint16_t word_size; @@ -1029,6 +1033,7 @@ e1000_eeprom_type type; bool use_eerd; bool use_eewr; }; +#endif typedef enum { e1000_smart_speed_default = 0, @@ -1081,10 +1086,14 @@ struct e1000_hw { uint32_t io_base; #endif uint32_t asf_firmware_present; +#ifndef CONFIG_E1000_NO_NVM uint32_t eeprom_semaphore_present; +#endif uint32_t swfw_sync_present; uint32_t swfwhw_semaphore_present; +#ifndef CONFIG_E1000_NO_NVM struct e1000_eeprom_info eeprom; +#endif e1000_ms_type master_slave; e1000_ms_type original_master_slave; e1000_ffe_config ffe_config_state; diff --git a/drivers/net/fm/Makefile b/drivers/net/fm/Makefile index bec86c16c1..ee5d768937 100644 --- a/drivers/net/fm/Makefile +++ b/drivers/net/fm/Makefile @@ -4,7 +4,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifdef CONFIG_FMAN_ENET obj-y += dtsec.o obj-y += eth.o obj-y += fm.o @@ -26,8 +25,12 @@ obj-$(CONFIG_PPC_P4080) += p4080.o obj-$(CONFIG_PPC_P5020) += p5020.o obj-$(CONFIG_PPC_P5040) += p5040.o obj-$(CONFIG_PPC_T1040) += t1040.o +obj-$(CONFIG_PPC_T1042) += t1040.o +obj-$(CONFIG_PPC_T1020) += t1040.o +obj-$(CONFIG_PPC_T1022) += t1040.o +obj-$(CONFIG_PPC_T2080) += t2080.o +obj-$(CONFIG_PPC_T2081) += t2080.o obj-$(CONFIG_PPC_T4240) += t4240.o obj-$(CONFIG_PPC_T4160) += t4240.o obj-$(CONFIG_PPC_B4420) += b4860.o obj-$(CONFIG_PPC_B4860) += b4860.o -endif diff --git a/drivers/net/fm/eth.c b/drivers/net/fm/eth.c index cb099cd849..218a5ed175 100644 --- a/drivers/net/fm/eth.c +++ b/drivers/net/fm/eth.c @@ -557,8 +557,16 @@ static int fm_eth_init_mac(struct fm_eth *fm_eth, struct ccsr_fman *reg) num = fm_eth->num; #ifdef CONFIG_SYS_FMAN_V3 - if (fm_eth->type == FM_ETH_10G_E) - num += 8; + if (fm_eth->type == FM_ETH_10G_E) { + /* 10GEC1/10GEC2 use mEMAC9/mEMAC10 + * 10GEC3/10GEC4 use mEMAC1/mEMAC2 + * so it needs to change the num. + */ + if (fm_eth->num >= 2) + num -= 2; + else + num += 8; + } base = ®->memac[num].fm_memac; phyregs = ®->memac[num].fm_memac_mdio; #else diff --git a/drivers/net/fm/fm.h b/drivers/net/fm/fm.h index 3ec49a4f3b..43de114b52 100644 --- a/drivers/net/fm/fm.h +++ b/drivers/net/fm/fm.h @@ -18,9 +18,11 @@ #define RX_PORT_1G_BASE 0x08 #define MAX_NUM_RX_PORT_1G CONFIG_SYS_NUM_FM1_DTSEC #define RX_PORT_10G_BASE 0x10 +#define RX_PORT_10G_BASE2 0x08 #define TX_PORT_1G_BASE 0x28 #define MAX_NUM_TX_PORT_1G CONFIG_SYS_NUM_FM1_DTSEC #define TX_PORT_10G_BASE 0x30 +#define TX_PORT_10G_BASE2 0x28 #define MIIM_TIMEOUT 0xFFFF struct fm_muram { diff --git a/drivers/net/fm/init.c b/drivers/net/fm/init.c index 35edd7ad94..cd787f4eed 100644 --- a/drivers/net/fm/init.c +++ b/drivers/net/fm/init.c @@ -64,6 +64,12 @@ struct fm_eth_info fm_info[] = { #if (CONFIG_SYS_NUM_FM1_10GEC >= 2) FM_TGEC_INFO_INITIALIZER(1, 2), #endif +#if (CONFIG_SYS_NUM_FM1_10GEC >= 3) + FM_TGEC_INFO_INITIALIZER2(1, 3), +#endif +#if (CONFIG_SYS_NUM_FM1_10GEC >= 4) + FM_TGEC_INFO_INITIALIZER2(1, 4), +#endif #if (CONFIG_SYS_NUM_FM2_10GEC >= 1) FM_TGEC_INFO_INITIALIZER(2, 1), #endif @@ -239,10 +245,14 @@ static void ft_fixup_port(void *blob, struct fm_eth_info *info, char *prop) * FM1_10GEC1 is enabled and FM1_DTSEC9 is disabled, ensure that the * dual-role MAC is not disabled, ditto for other dual-role MACs. */ - if (((info->port == FM1_DTSEC9) && (PORT_IS_ENABLED(FM1_10GEC1))) || - ((info->port == FM1_DTSEC10) && (PORT_IS_ENABLED(FM1_10GEC2))) || - ((info->port == FM1_10GEC1) && (PORT_IS_ENABLED(FM1_DTSEC9))) || - ((info->port == FM1_10GEC2) && (PORT_IS_ENABLED(FM1_DTSEC10))) + if (((info->port == FM1_DTSEC9) && (PORT_IS_ENABLED(FM1_10GEC1))) || + ((info->port == FM1_DTSEC10) && (PORT_IS_ENABLED(FM1_10GEC2))) || + ((info->port == FM1_DTSEC1) && (PORT_IS_ENABLED(FM1_10GEC3))) || + ((info->port == FM1_DTSEC2) && (PORT_IS_ENABLED(FM1_10GEC4))) || + ((info->port == FM1_10GEC1) && (PORT_IS_ENABLED(FM1_DTSEC9))) || + ((info->port == FM1_10GEC2) && (PORT_IS_ENABLED(FM1_DTSEC10))) || + ((info->port == FM1_10GEC3) && (PORT_IS_ENABLED(FM1_DTSEC1))) || + ((info->port == FM1_10GEC4) && (PORT_IS_ENABLED(FM1_DTSEC2))) #if (CONFIG_SYS_NUM_FMAN == 2) || ((info->port == FM2_DTSEC9) && (PORT_IS_ENABLED(FM2_10GEC1))) || diff --git a/drivers/net/fm/t2080.c b/drivers/net/fm/t2080.c new file mode 100644 index 0000000000..b5c1e9f76e --- /dev/null +++ b/drivers/net/fm/t2080.c @@ -0,0 +1,91 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * Shengzhou Liu <Shengzhou.Liu@freescale.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <phy.h> +#include <fm_eth.h> +#include <asm/immap_85xx.h> +#include <asm/fsl_serdes.h> + +u32 port_to_devdisr[] = { + [FM1_DTSEC1] = FSL_CORENET_DEVDISR2_DTSEC1_1, + [FM1_DTSEC2] = FSL_CORENET_DEVDISR2_DTSEC1_2, + [FM1_DTSEC3] = FSL_CORENET_DEVDISR2_DTSEC1_3, + [FM1_DTSEC4] = FSL_CORENET_DEVDISR2_DTSEC1_4, + [FM1_DTSEC5] = FSL_CORENET_DEVDISR2_DTSEC1_5, + [FM1_DTSEC6] = FSL_CORENET_DEVDISR2_DTSEC1_6, + [FM1_DTSEC9] = FSL_CORENET_DEVDISR2_DTSEC1_9, + [FM1_DTSEC10] = FSL_CORENET_DEVDISR2_DTSEC1_10, + [FM1_10GEC1] = FSL_CORENET_DEVDISR2_10GEC1_1, + [FM1_10GEC2] = FSL_CORENET_DEVDISR2_10GEC1_2, + [FM1_10GEC3] = FSL_CORENET_DEVDISR2_10GEC1_3, + [FM1_10GEC4] = FSL_CORENET_DEVDISR2_10GEC1_4, +}; + +static int is_device_disabled(enum fm_port port) +{ + ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 devdisr2 = in_be32(&gur->devdisr2); + + return port_to_devdisr[port] & devdisr2; +} + +void fman_disable_port(enum fm_port port) +{ + ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + + setbits_be32(&gur->devdisr2, port_to_devdisr[port]); +} + +phy_interface_t fman_port_enet_if(enum fm_port port) +{ + ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 rcwsr13 = in_be32(&gur->rcwsr[13]); + + if (is_device_disabled(port)) + return PHY_INTERFACE_MODE_NONE; + + if ((port == FM1_10GEC1 || port == FM1_10GEC2 || + port == FM1_10GEC3 || port == FM1_10GEC4) && + ((is_serdes_configured(XAUI_FM1_MAC9)) || + (is_serdes_configured(XFI_FM1_MAC1)) || + (is_serdes_configured(XFI_FM1_MAC2)) || + (is_serdes_configured(XFI_FM1_MAC9)) || + (is_serdes_configured(XFI_FM1_MAC10)))) + return PHY_INTERFACE_MODE_XGMII; + + if ((port == FM1_DTSEC3) && ((rcwsr13 & FSL_CORENET_RCWSR13_EC1) == + FSL_CORENET_RCWSR13_EC1_DTSEC3_RGMII)) + return PHY_INTERFACE_MODE_RGMII; + + if ((port == FM1_DTSEC4) && ((rcwsr13 & FSL_CORENET_RCWSR13_EC2) == + FSL_CORENET_RCWSR13_EC2_DTSEC4_RGMII)) + return PHY_INTERFACE_MODE_RGMII; + + if ((port == FM1_DTSEC10) && ((rcwsr13 & FSL_CORENET_RCWSR13_EC2) == + FSL_CORENET_RCWSR13_EC2_DTSEC10_RGMII)) + return PHY_INTERFACE_MODE_RGMII; + + switch (port) { + case FM1_DTSEC1: + case FM1_DTSEC2: + case FM1_DTSEC3: + case FM1_DTSEC4: + case FM1_DTSEC5: + case FM1_DTSEC6: + case FM1_DTSEC9: + case FM1_DTSEC10: + if (is_serdes_configured(SGMII_FM1_DTSEC1 + port - FM1_DTSEC1)) + return PHY_INTERFACE_MODE_SGMII; + break; + default: + return PHY_INTERFACE_MODE_NONE; + } + + return PHY_INTERFACE_MODE_NONE; +} diff --git a/drivers/net/fsl_mdio.c b/drivers/net/fsl_mdio.c index ce36bd7a34..1d88e6504b 100644 --- a/drivers/net/fsl_mdio.c +++ b/drivers/net/fsl_mdio.c @@ -1,5 +1,5 @@ /* - * Copyright 2009-2010 Freescale Semiconductor, Inc. + * Copyright 2009-2010, 2013 Freescale Semiconductor, Inc. * Jun-jie Zhang <b18070@freescale.com> * Mingkai Hu <Mingkai.hu@freescale.com> * @@ -13,7 +13,7 @@ #include <asm/errno.h> #include <asm/fsl_enet.h> -void tsec_local_mdio_write(struct tsec_mii_mng *phyregs, int port_addr, +void tsec_local_mdio_write(struct tsec_mii_mng __iomem *phyregs, int port_addr, int dev_addr, int regnum, int value) { int timeout = 1000000; @@ -26,7 +26,7 @@ void tsec_local_mdio_write(struct tsec_mii_mng *phyregs, int port_addr, ; } -int tsec_local_mdio_read(struct tsec_mii_mng *phyregs, int port_addr, +int tsec_local_mdio_read(struct tsec_mii_mng __iomem *phyregs, int port_addr, int dev_addr, int regnum) { int value; @@ -57,7 +57,8 @@ int tsec_local_mdio_read(struct tsec_mii_mng *phyregs, int port_addr, static int fsl_pq_mdio_reset(struct mii_dev *bus) { - struct tsec_mii_mng *regs = bus->priv; + struct tsec_mii_mng __iomem *regs = + (struct tsec_mii_mng __iomem *)bus->priv; /* Reset MII (due to new addresses) */ out_be32(®s->miimcfg, MIIMCFG_RESET_MGMT); @@ -72,7 +73,8 @@ static int fsl_pq_mdio_reset(struct mii_dev *bus) int tsec_phy_read(struct mii_dev *bus, int addr, int dev_addr, int regnum) { - struct tsec_mii_mng *phyregs = bus->priv; + struct tsec_mii_mng __iomem *phyregs = + (struct tsec_mii_mng __iomem *)bus->priv; return tsec_local_mdio_read(phyregs, addr, dev_addr, regnum); } @@ -80,7 +82,8 @@ int tsec_phy_read(struct mii_dev *bus, int addr, int dev_addr, int regnum) int tsec_phy_write(struct mii_dev *bus, int addr, int dev_addr, int regnum, u16 value) { - struct tsec_mii_mng *phyregs = bus->priv; + struct tsec_mii_mng __iomem *phyregs = + (struct tsec_mii_mng __iomem *)bus->priv; tsec_local_mdio_write(phyregs, addr, dev_addr, regnum, value); @@ -101,7 +104,7 @@ int fsl_pq_mdio_init(bd_t *bis, struct fsl_pq_mdio_info *info) bus->reset = fsl_pq_mdio_reset; sprintf(bus->name, info->name); - bus->priv = info->regs; + bus->priv = (void *)info->regs; return mdio_register(bus); } diff --git a/drivers/net/mvgbe.c b/drivers/net/mvgbe.c index 6c901d1eaa..0cd06b6a69 100644 --- a/drivers/net/mvgbe.c +++ b/drivers/net/mvgbe.c @@ -420,8 +420,9 @@ static int mvgbe_init(struct eth_device *dev) { struct mvgbe_device *dmvgbe = to_mvgbe(dev); struct mvgbe_registers *regs = dmvgbe->regs; -#if (defined (CONFIG_MII) || defined (CONFIG_CMD_MII)) \ - && defined (CONFIG_SYS_FAULT_ECHO_LINK_DOWN) +#if (defined(CONFIG_MII) || defined(CONFIG_CMD_MII)) && \ + !defined(CONFIG_PHYLIB) && \ + defined(CONFIG_SYS_FAULT_ECHO_LINK_DOWN) int i; #endif /* setup RX rings */ diff --git a/drivers/net/npe/Makefile b/drivers/net/npe/Makefile index 7fa5ea635f..0779255216 100644 --- a/drivers/net/npe/Makefile +++ b/drivers/net/npe/Makefile @@ -8,9 +8,8 @@ LOCAL_CFLAGS += -I$(TOPDIR)/drivers/net/npe/include -DCONFIG_IXP425_COMPONENT_ETHDB -D__linux CFLAGS += $(LOCAL_CFLAGS) CPPFLAGS += $(LOCAL_CFLAGS) # needed for depend -HOSTCFLAGS += $(LOCAL_CFLAGS) -obj-$(CONFIG_IXP4XX_NPE) := npe.o \ +obj-y := npe.o \ miiphy.o \ IxOsalBufferMgt.o \ IxOsalIoMem.o \ diff --git a/drivers/net/pcnet.c b/drivers/net/pcnet.c index 283cb48b4e..71a3110712 100644 --- a/drivers/net/pcnet.c +++ b/drivers/net/pcnet.c @@ -89,39 +89,39 @@ static pcnet_priv_t *lp; #define PCNET_RESET 0x14 #define PCNET_BDP 0x16 -static u16 pcnet_read_csr (struct eth_device *dev, int index) +static u16 pcnet_read_csr(struct eth_device *dev, int index) { - outw (index, dev->iobase + PCNET_RAP); - return inw (dev->iobase + PCNET_RDP); + outw(index, dev->iobase + PCNET_RAP); + return inw(dev->iobase + PCNET_RDP); } -static void pcnet_write_csr (struct eth_device *dev, int index, u16 val) +static void pcnet_write_csr(struct eth_device *dev, int index, u16 val) { - outw (index, dev->iobase + PCNET_RAP); - outw (val, dev->iobase + PCNET_RDP); + outw(index, dev->iobase + PCNET_RAP); + outw(val, dev->iobase + PCNET_RDP); } -static u16 pcnet_read_bcr (struct eth_device *dev, int index) +static u16 pcnet_read_bcr(struct eth_device *dev, int index) { - outw (index, dev->iobase + PCNET_RAP); - return inw (dev->iobase + PCNET_BDP); + outw(index, dev->iobase + PCNET_RAP); + return inw(dev->iobase + PCNET_BDP); } -static void pcnet_write_bcr (struct eth_device *dev, int index, u16 val) +static void pcnet_write_bcr(struct eth_device *dev, int index, u16 val) { - outw (index, dev->iobase + PCNET_RAP); - outw (val, dev->iobase + PCNET_BDP); + outw(index, dev->iobase + PCNET_RAP); + outw(val, dev->iobase + PCNET_BDP); } -static void pcnet_reset (struct eth_device *dev) +static void pcnet_reset(struct eth_device *dev) { - inw (dev->iobase + PCNET_RESET); + inw(dev->iobase + PCNET_RESET); } -static int pcnet_check (struct eth_device *dev) +static int pcnet_check(struct eth_device *dev) { - outw (88, dev->iobase + PCNET_RAP); - return (inw (dev->iobase + PCNET_RAP) == 88); + outw(88, dev->iobase + PCNET_RAP); + return inw(dev->iobase + PCNET_RAP) == 88; } static int pcnet_init (struct eth_device *dev, bd_t * bis); @@ -139,63 +139,64 @@ static struct pci_device_id supported[] = { }; -int pcnet_initialize (bd_t * bis) +int pcnet_initialize(bd_t *bis) { pci_dev_t devbusfn; struct eth_device *dev; u16 command, status; int dev_nr = 0; - PCNET_DEBUG1 ("\npcnet_initialize...\n"); + PCNET_DEBUG1("\npcnet_initialize...\n"); for (dev_nr = 0;; dev_nr++) { /* * Find the PCnet PCI device(s). */ - if ((devbusfn = pci_find_devices (supported, dev_nr)) < 0) { + devbusfn = pci_find_devices(supported, dev_nr); + if (devbusfn < 0) break; - } /* * Allocate and pre-fill the device structure. */ - dev = (struct eth_device *) malloc (sizeof *dev); + dev = (struct eth_device *)malloc(sizeof(*dev)); if (!dev) { printf("pcnet: Can not allocate memory\n"); break; } memset(dev, 0, sizeof(*dev)); - dev->priv = (void *) devbusfn; - sprintf (dev->name, "pcnet#%d", dev_nr); + dev->priv = (void *)devbusfn; + sprintf(dev->name, "pcnet#%d", dev_nr); /* * Setup the PCI device. */ - pci_read_config_dword (devbusfn, PCI_BASE_ADDRESS_0, - (unsigned int *) &dev->iobase); - dev->iobase=pci_io_to_phys (devbusfn, dev->iobase); + pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_0, + (unsigned int *)&dev->iobase); + dev->iobase = pci_io_to_phys(devbusfn, dev->iobase); dev->iobase &= ~0xf; - PCNET_DEBUG1 ("%s: devbusfn=0x%x iobase=0x%x: ", - dev->name, devbusfn, dev->iobase); + PCNET_DEBUG1("%s: devbusfn=0x%x iobase=0x%x: ", + dev->name, devbusfn, dev->iobase); command = PCI_COMMAND_IO | PCI_COMMAND_MASTER; - pci_write_config_word (devbusfn, PCI_COMMAND, command); - pci_read_config_word (devbusfn, PCI_COMMAND, &status); + pci_write_config_word(devbusfn, PCI_COMMAND, command); + pci_read_config_word(devbusfn, PCI_COMMAND, &status); if ((status & command) != command) { - printf ("%s: Couldn't enable IO access or Bus Mastering\n", dev->name); - free (dev); + printf("%s: Couldn't enable IO access or Bus Mastering\n", + dev->name); + free(dev); continue; } - pci_write_config_byte (devbusfn, PCI_LATENCY_TIMER, 0x40); + pci_write_config_byte(devbusfn, PCI_LATENCY_TIMER, 0x40); /* * Probe the PCnet chip. */ - if (pcnet_probe (dev, bis, dev_nr) < 0) { - free (dev); + if (pcnet_probe(dev, bis, dev_nr) < 0) { + free(dev); continue; } @@ -207,15 +208,15 @@ int pcnet_initialize (bd_t * bis) dev->send = pcnet_send; dev->recv = pcnet_recv; - eth_register (dev); + eth_register(dev); } - udelay (10 * 1000); + udelay(10 * 1000); return dev_nr; } -static int pcnet_probe (struct eth_device *dev, bd_t * bis, int dev_nr) +static int pcnet_probe(struct eth_device *dev, bd_t *bis, int dev_nr) { int chip_version; char *chipname; @@ -225,17 +226,17 @@ static int pcnet_probe (struct eth_device *dev, bd_t * bis, int dev_nr) #endif /* Reset the PCnet controller */ - pcnet_reset (dev); + pcnet_reset(dev); /* Check if register access is working */ - if (pcnet_read_csr (dev, 0) != 4 || !pcnet_check (dev)) { - printf ("%s: CSR register access check failed\n", dev->name); + if (pcnet_read_csr(dev, 0) != 4 || !pcnet_check(dev)) { + printf("%s: CSR register access check failed\n", dev->name); return -1; } /* Identify the chip */ chip_version = - pcnet_read_csr (dev, 88) | (pcnet_read_csr (dev, 89) << 16); + pcnet_read_csr(dev, 88) | (pcnet_read_csr(dev, 89) << 16); if ((chip_version & 0xfff) != 0x003) return -1; chip_version = (chip_version >> 12) & 0xffff; @@ -254,12 +255,12 @@ static int pcnet_probe (struct eth_device *dev, bd_t * bis, int dev_nr) break; #endif default: - printf ("%s: PCnet version %#x not supported\n", - dev->name, chip_version); + printf("%s: PCnet version %#x not supported\n", + dev->name, chip_version); return -1; } - PCNET_DEBUG1 ("AMD %s\n", chipname); + PCNET_DEBUG1("AMD %s\n", chipname); #ifdef PCNET_HAS_PROM /* @@ -270,7 +271,7 @@ static int pcnet_probe (struct eth_device *dev, bd_t * bis, int dev_nr) for (i = 0; i < 3; i++) { unsigned int val; - val = pcnet_read_csr (dev, i + 12) & 0x0ffff; + val = pcnet_read_csr(dev, i + 12) & 0x0ffff; /* There may be endianness issues here. */ dev->enetaddr[2 * i] = val & 0x0ff; dev->enetaddr[2 * i + 1] = (val >> 8) & 0x0ff; @@ -280,35 +281,40 @@ static int pcnet_probe (struct eth_device *dev, bd_t * bis, int dev_nr) return 0; } -static int pcnet_init (struct eth_device *dev, bd_t * bis) +static int pcnet_init(struct eth_device *dev, bd_t *bis) { int i, val; u32 addr; - PCNET_DEBUG1 ("%s: pcnet_init...\n", dev->name); + PCNET_DEBUG1("%s: pcnet_init...\n", dev->name); /* Switch pcnet to 32bit mode */ - pcnet_write_bcr (dev, 20, 2); - -#ifdef CONFIG_PN62 - /* Setup LED registers */ - val = pcnet_read_bcr (dev, 2) | 0x1000; - pcnet_write_bcr (dev, 2, val); /* enable LEDPE */ - pcnet_write_bcr (dev, 4, 0x5080); /* 100MBit */ - pcnet_write_bcr (dev, 5, 0x40c0); /* LNKSE */ - pcnet_write_bcr (dev, 6, 0x4090); /* TX Activity */ - pcnet_write_bcr (dev, 7, 0x4084); /* RX Activity */ -#endif + pcnet_write_bcr(dev, 20, 2); /* Set/reset autoselect bit */ - val = pcnet_read_bcr (dev, 2) & ~2; + val = pcnet_read_bcr(dev, 2) & ~2; val |= 2; - pcnet_write_bcr (dev, 2, val); + pcnet_write_bcr(dev, 2, val); /* Enable auto negotiate, setup, disable fd */ - val = pcnet_read_bcr (dev, 32) & ~0x98; + val = pcnet_read_bcr(dev, 32) & ~0x98; val |= 0x20; - pcnet_write_bcr (dev, 32, val); + pcnet_write_bcr(dev, 32, val); + + /* + * Enable NOUFLO on supported controllers, with the transmit + * start point set to the full packet. This will cause entire + * packets to be buffered by the ethernet controller before + * transmission, eliminating underflows which are common on + * slower devices. Controllers which do not support NOUFLO will + * simply be left with a larger transmit FIFO threshold. + */ + val = pcnet_read_bcr(dev, 18); + val |= 1 << 11; + pcnet_write_bcr(dev, 18, val); + val = pcnet_read_csr(dev, 80); + val |= 0x3 << 10; + pcnet_write_csr(dev, 80, val); /* * We only maintain one structure because the drivers will never @@ -316,12 +322,12 @@ static int pcnet_init (struct eth_device *dev, bd_t * bis) * must be aligned on 16-byte boundaries. */ if (lp == NULL) { - addr = (u32) malloc (sizeof (pcnet_priv_t) + 0x10); + addr = (u32)malloc(sizeof(pcnet_priv_t) + 0x10); addr = (addr + 0xf) & ~0xf; - lp = (pcnet_priv_t *) addr; + lp = (pcnet_priv_t *)addr; } - lp->init_block.mode = cpu_to_le16 (0x0000); + lp->init_block.mode = cpu_to_le16(0x0000); lp->init_block.filter[0] = 0x00000000; lp->init_block.filter[1] = 0x00000000; @@ -330,9 +336,9 @@ static int pcnet_init (struct eth_device *dev, bd_t * bis) */ lp->cur_rx = 0; for (i = 0; i < RX_RING_SIZE; i++) { - lp->rx_ring[i].base = PCI_TO_MEM_LE (dev, lp->rx_buf[i]); - lp->rx_ring[i].buf_length = cpu_to_le16 (-PKT_BUF_SZ); - lp->rx_ring[i].status = cpu_to_le16 (0x8000); + lp->rx_ring[i].base = PCI_TO_MEM_LE(dev, lp->rx_buf[i]); + lp->rx_ring[i].buf_length = cpu_to_le16(-PKT_BUF_SZ); + lp->rx_ring[i].status = cpu_to_le16(0x8000); PCNET_DEBUG1 ("Rx%d: base=0x%x buf_length=0x%hx status=0x%hx\n", i, lp->rx_ring[i].base, lp->rx_ring[i].buf_length, @@ -352,48 +358,49 @@ static int pcnet_init (struct eth_device *dev, bd_t * bis) /* * Setup Init Block. */ - PCNET_DEBUG1 ("Init block at 0x%p: MAC", &lp->init_block); + PCNET_DEBUG1("Init block at 0x%p: MAC", &lp->init_block); for (i = 0; i < 6; i++) { lp->init_block.phys_addr[i] = dev->enetaddr[i]; - PCNET_DEBUG1 (" %02x", lp->init_block.phys_addr[i]); + PCNET_DEBUG1(" %02x", lp->init_block.phys_addr[i]); } - lp->init_block.tlen_rlen = cpu_to_le16 (TX_RING_LEN_BITS | - RX_RING_LEN_BITS); - lp->init_block.rx_ring = PCI_TO_MEM_LE (dev, lp->rx_ring); - lp->init_block.tx_ring = PCI_TO_MEM_LE (dev, lp->tx_ring); + lp->init_block.tlen_rlen = cpu_to_le16(TX_RING_LEN_BITS | + RX_RING_LEN_BITS); + lp->init_block.rx_ring = PCI_TO_MEM_LE(dev, lp->rx_ring); + lp->init_block.tx_ring = PCI_TO_MEM_LE(dev, lp->tx_ring); + flush_dcache_range((unsigned long)lp, (unsigned long)&lp->rx_buf); - PCNET_DEBUG1 ("\ntlen_rlen=0x%x rx_ring=0x%x tx_ring=0x%x\n", - lp->init_block.tlen_rlen, - lp->init_block.rx_ring, lp->init_block.tx_ring); + PCNET_DEBUG1("\ntlen_rlen=0x%x rx_ring=0x%x tx_ring=0x%x\n", + lp->init_block.tlen_rlen, + lp->init_block.rx_ring, lp->init_block.tx_ring); /* * Tell the controller where the Init Block is located. */ - addr = PCI_TO_MEM (dev, &lp->init_block); - pcnet_write_csr (dev, 1, addr & 0xffff); - pcnet_write_csr (dev, 2, (addr >> 16) & 0xffff); + addr = PCI_TO_MEM(dev, &lp->init_block); + pcnet_write_csr(dev, 1, addr & 0xffff); + pcnet_write_csr(dev, 2, (addr >> 16) & 0xffff); - pcnet_write_csr (dev, 4, 0x0915); - pcnet_write_csr (dev, 0, 0x0001); /* start */ + pcnet_write_csr(dev, 4, 0x0915); + pcnet_write_csr(dev, 0, 0x0001); /* start */ /* Wait for Init Done bit */ for (i = 10000; i > 0; i--) { - if (pcnet_read_csr (dev, 0) & 0x0100) + if (pcnet_read_csr(dev, 0) & 0x0100) break; - udelay (10); + udelay(10); } if (i <= 0) { - printf ("%s: TIMEOUT: controller init failed\n", dev->name); - pcnet_reset (dev); + printf("%s: TIMEOUT: controller init failed\n", dev->name); + pcnet_reset(dev); return -1; } /* * Finally start network controller operation. */ - pcnet_write_csr (dev, 0, 0x0002); + pcnet_write_csr(dev, 0, 0x0002); return 0; } @@ -403,20 +410,25 @@ static int pcnet_send(struct eth_device *dev, void *packet, int pkt_len) int i, status; struct pcnet_tx_head *entry = &lp->tx_ring[lp->cur_tx]; - PCNET_DEBUG2 ("Tx%d: %d bytes from 0x%p ", lp->cur_tx, pkt_len, - packet); + PCNET_DEBUG2("Tx%d: %d bytes from 0x%p ", lp->cur_tx, pkt_len, + packet); + + flush_dcache_range((unsigned long)packet, + (unsigned long)packet + pkt_len); /* Wait for completion by testing the OWN bit */ for (i = 1000; i > 0; i--) { - status = le16_to_cpu (entry->status); + invalidate_dcache_range((unsigned long)entry, + (unsigned long)entry + sizeof(*entry)); + status = le16_to_cpu(entry->status); if ((status & 0x8000) == 0) break; - udelay (100); - PCNET_DEBUG2 ("."); + udelay(100); + PCNET_DEBUG2("."); } if (i <= 0) { - printf ("%s: TIMEOUT: Tx%d failed (status = 0x%x)\n", - dev->name, lp->cur_tx, status); + printf("%s: TIMEOUT: Tx%d failed (status = 0x%x)\n", + dev->name, lp->cur_tx, status); pkt_len = 0; goto failure; } @@ -426,19 +438,21 @@ static int pcnet_send(struct eth_device *dev, void *packet, int pkt_len) * set the status with the "ownership" bits last. */ status = 0x8300; - entry->length = le16_to_cpu (-pkt_len); + entry->length = cpu_to_le16(-pkt_len); entry->misc = 0x00000000; - entry->base = PCI_TO_MEM_LE (dev, packet); - entry->status = le16_to_cpu (status); + entry->base = PCI_TO_MEM_LE(dev, packet); + entry->status = cpu_to_le16(status); + flush_dcache_range((unsigned long)entry, + (unsigned long)entry + sizeof(*entry)); /* Trigger an immediate send poll. */ - pcnet_write_csr (dev, 0, 0x0008); + pcnet_write_csr(dev, 0, 0x0008); failure: if (++lp->cur_tx >= TX_RING_SIZE) lp->cur_tx = 0; - PCNET_DEBUG2 ("done\n"); + PCNET_DEBUG2("done\n"); return pkt_len; } @@ -450,43 +464,49 @@ static int pcnet_recv (struct eth_device *dev) while (1) { entry = &lp->rx_ring[lp->cur_rx]; + invalidate_dcache_range((unsigned long)entry, + (unsigned long)entry + sizeof(*entry)); /* * If we own the next entry, it's a new packet. Send it up. */ - if (((status = le16_to_cpu (entry->status)) & 0x8000) != 0) { + status = le16_to_cpu(entry->status); + if ((status & 0x8000) != 0) break; - } status >>= 8; if (status != 0x03) { /* There was an error. */ - - printf ("%s: Rx%d", dev->name, lp->cur_rx); - PCNET_DEBUG1 (" (status=0x%x)", status); + printf("%s: Rx%d", dev->name, lp->cur_rx); + PCNET_DEBUG1(" (status=0x%x)", status); if (status & 0x20) - printf (" Frame"); + printf(" Frame"); if (status & 0x10) - printf (" Overflow"); + printf(" Overflow"); if (status & 0x08) - printf (" CRC"); + printf(" CRC"); if (status & 0x04) - printf (" Fifo"); - printf (" Error\n"); - entry->status &= le16_to_cpu (0x03ff); + printf(" Fifo"); + printf(" Error\n"); + entry->status &= le16_to_cpu(0x03ff); } else { - - pkt_len = - (le32_to_cpu (entry->msg_length) & 0xfff) - 4; + pkt_len = (le32_to_cpu(entry->msg_length) & 0xfff) - 4; if (pkt_len < 60) { - printf ("%s: Rx%d: invalid packet length %d\n", dev->name, lp->cur_rx, pkt_len); + printf("%s: Rx%d: invalid packet length %d\n", + dev->name, lp->cur_rx, pkt_len); } else { - NetReceive (lp->rx_buf[lp->cur_rx], pkt_len); - PCNET_DEBUG2 ("Rx%d: %d bytes from 0x%p\n", - lp->cur_rx, pkt_len, - lp->rx_buf[lp->cur_rx]); + invalidate_dcache_range( + (unsigned long)lp->rx_buf[lp->cur_rx], + (unsigned long)lp->rx_buf[lp->cur_rx] + + pkt_len); + NetReceive(lp->rx_buf[lp->cur_rx], pkt_len); + PCNET_DEBUG2("Rx%d: %d bytes from 0x%p\n", + lp->cur_rx, pkt_len, + lp->rx_buf[lp->cur_rx]); } } - entry->status |= cpu_to_le16 (0x8000); + entry->status |= cpu_to_le16(0x8000); + flush_dcache_range((unsigned long)entry, + (unsigned long)entry + sizeof(*entry)); if (++lp->cur_rx >= RX_RING_SIZE) lp->cur_rx = 0; @@ -494,22 +514,21 @@ static int pcnet_recv (struct eth_device *dev) return pkt_len; } -static void pcnet_halt (struct eth_device *dev) +static void pcnet_halt(struct eth_device *dev) { int i; - PCNET_DEBUG1 ("%s: pcnet_halt...\n", dev->name); + PCNET_DEBUG1("%s: pcnet_halt...\n", dev->name); /* Reset the PCnet controller */ - pcnet_reset (dev); + pcnet_reset(dev); /* Wait for Stop bit */ for (i = 1000; i > 0; i--) { - if (pcnet_read_csr (dev, 0) & 0x4) + if (pcnet_read_csr(dev, 0) & 0x4) break; - udelay (10); - } - if (i <= 0) { - printf ("%s: TIMEOUT: controller reset failed\n", dev->name); + udelay(10); } + if (i <= 0) + printf("%s: TIMEOUT: controller reset failed\n", dev->name); } diff --git a/drivers/net/phy/atheros.c b/drivers/net/phy/atheros.c index 0f2dfd6126..b20b4df981 100644 --- a/drivers/net/phy/atheros.c +++ b/drivers/net/phy/atheros.c @@ -40,7 +40,7 @@ static int ar8035_config(struct phy_device *phydev) static struct phy_driver AR8021_driver = { .name = "AR8021", .uid = 0x4dd040, - .mask = 0xfffff0, + .mask = 0x4fffff, .features = PHY_GBIT_FEATURES, .config = ar8021_config, .startup = genphy_startup, @@ -48,11 +48,11 @@ static struct phy_driver AR8021_driver = { }; static struct phy_driver AR8031_driver = { - .name = "AR8031", + .name = "AR8031/AR8033", .uid = 0x4dd074, - .mask = 0xfffff0, + .mask = 0x4fffff, .features = PHY_GBIT_FEATURES, - .config = genphy_config, + .config = ar8021_config, .startup = genphy_startup, .shutdown = genphy_shutdown, }; diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index a7450f8326..5d7e3be52e 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -100,6 +100,19 @@ int ksz9021_phy_extended_read(struct phy_device *phydev, int regnum) return phy_read(phydev, MDIO_DEVAD_NONE, MII_KSZ9021_EXTENDED_DATAR); } + +static int ksz9021_phy_extread(struct phy_device *phydev, int addr, int devaddr, + int regnum) +{ + return ksz9021_phy_extended_read(phydev, regnum); +} + +static int ksz9021_phy_extwrite(struct phy_device *phydev, int addr, + int devaddr, int regnum, u16 val) +{ + return ksz9021_phy_extended_write(phydev, regnum, val); +} + /* Micrel ksz9021 */ static int ksz9021_config(struct phy_device *phydev) { @@ -131,6 +144,8 @@ static struct phy_driver ksz9021_driver = { .config = &ksz9021_config, .startup = &ksz90xx_startup, .shutdown = &genphy_shutdown, + .writeext = &ksz9021_phy_extwrite, + .readext = &ksz9021_phy_extread, }; #endif @@ -171,14 +186,31 @@ int ksz9031_phy_extended_read(struct phy_device *phydev, int devaddr, return phy_read(phydev, MDIO_DEVAD_NONE, MII_KSZ9031_MMD_REG_DATA); } +static int ksz9031_phy_extread(struct phy_device *phydev, int addr, int devaddr, + int regnum) +{ + return ksz9031_phy_extended_read(phydev, devaddr, regnum, + MII_KSZ9031_MOD_DATA_NO_POST_INC); +}; + +static int ksz9031_phy_extwrite(struct phy_device *phydev, int addr, + int devaddr, int regnum, u16 val) +{ + return ksz9031_phy_extended_write(phydev, devaddr, regnum, + MII_KSZ9031_MOD_DATA_POST_INC_RW, val); +}; + + static struct phy_driver ksz9031_driver = { .name = "Micrel ksz9031", .uid = 0x221620, - .mask = 0xfffffe, + .mask = 0xfffff0, .features = PHY_GBIT_FEATURES, .config = &genphy_config, .startup = &ksz90xx_startup, .shutdown = &genphy_shutdown, + .writeext = &ksz9031_phy_extwrite, + .readext = &ksz9031_phy_extread, }; int phy_micrel_init(void) diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 62925bb286..c691fbbbc6 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -275,13 +275,14 @@ int genphy_parse_link(struct phy_device *phydev) int mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMSR); /* We're using autonegotiation */ - if (mii_reg & BMSR_ANEGCAPABLE) { + if (phydev->supported & SUPPORTED_Autoneg) { u32 lpa = 0; int gblpa = 0; u32 estatus = 0; /* Check for gigabit capability */ - if (mii_reg & BMSR_ERCAP) { + if (phydev->supported & (SUPPORTED_1000baseT_Full | + SUPPORTED_1000baseT_Half)) { /* We want a list of states supported by * both PHYs in the link */ diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c index ddbbc35e27..a3ace68526 100644 --- a/drivers/net/phy/realtek.c +++ b/drivers/net/phy/realtek.c @@ -102,7 +102,7 @@ static int rtl8211x_startup(struct phy_device *phydev) static struct phy_driver RTL8211B_driver = { .name = "RealTek RTL8211B", .uid = 0x1cc910, - .mask = 0xfffff0, + .mask = 0xffffff, .features = PHY_GBIT_FEATURES, .config = &rtl8211x_config, .startup = &rtl8211x_startup, @@ -113,7 +113,7 @@ static struct phy_driver RTL8211B_driver = { static struct phy_driver RTL8211E_driver = { .name = "RealTek RTL8211E", .uid = 0x1cc915, - .mask = 0xfffff0, + .mask = 0xffffff, .features = PHY_GBIT_FEATURES, .config = &rtl8211x_config, .startup = &rtl8211x_startup, @@ -124,7 +124,7 @@ static struct phy_driver RTL8211E_driver = { static struct phy_driver RTL8211DN_driver = { .name = "RealTek RTL8211DN", .uid = 0x1cc914, - .mask = 0xfffff0, + .mask = 0xffffff, .features = PHY_GBIT_FEATURES, .config = &rtl8211x_config, .startup = &rtl8211x_startup, diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c index 60ed92d203..bfd9815abf 100644 --- a/drivers/net/phy/smsc.c +++ b/drivers/net/phy/smsc.c @@ -12,6 +12,7 @@ */ #include <miiphy.h> +/* This code does not check the partner abilities. */ static int smsc_parse_status(struct phy_device *phydev) { int mii_reg; @@ -64,7 +65,7 @@ static struct phy_driver lan8710_driver = { .mask = 0xffff0, .features = PHY_BASIC_FEATURES, .config = &genphy_config_aneg, - .startup = &smsc_startup, + .startup = &genphy_startup, .shutdown = &genphy_shutdown, }; diff --git a/drivers/net/phy/vitesse.c b/drivers/net/phy/vitesse.c index 5cf103e5a1..c555979661 100644 --- a/drivers/net/phy/vitesse.c +++ b/drivers/net/phy/vitesse.c @@ -49,6 +49,15 @@ #define MIIM_VSC8574_18G_QSGMII 0x80e0 #define MIIM_VSC8574_18G_CMDSTAT 0x8000 +/* Vitesse VSC8514 control register */ +#define MIIM_VSC8514_GENERAL18 0x12 +#define MIIM_VSC8514_GENERAL19 0x13 +#define MIIM_VSC8514_GENERAL23 0x17 + +/* Vitesse VSC8514 gerenal purpose register 18 */ +#define MIIM_VSC8514_18G_QSGMII 0x80e0 +#define MIIM_VSC8514_18G_CMDSTAT 0x8000 + /* CIS8201 */ static int vitesse_config(struct phy_device *phydev) { @@ -148,7 +157,7 @@ static int vsc8601_config(struct phy_device *phydev) static int vsc8574_config(struct phy_device *phydev) { u32 val; - /* configure regiser 19G for MAC */ + /* configure register 19G for MAC */ phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS, PHY_EXT_PAGE_ACCESS_GENERAL); @@ -188,6 +197,53 @@ static int vsc8574_config(struct phy_device *phydev) return 0; } +static int vsc8514_config(struct phy_device *phydev) +{ + u32 val; + int timeout = 1000000; + + /* configure register to access 19G */ + phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS, + PHY_EXT_PAGE_ACCESS_GENERAL); + + val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_GENERAL19); + if (phydev->interface == PHY_INTERFACE_MODE_QSGMII) { + /* set bit 15:14 to '01' for QSGMII mode */ + val = (val & 0x3fff) | (1 << 14); + phy_write(phydev, MDIO_DEVAD_NONE, + MIIM_VSC8514_GENERAL19, val); + /* Enable 4 ports MAC QSGMII */ + phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_GENERAL18, + MIIM_VSC8514_18G_QSGMII); + } else { + /*TODO Add SGMII functionality once spec sheet + * for VSC8514 defines complete functionality + */ + } + + val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_GENERAL18); + /* When bit 15 is cleared the command has completed */ + while ((val & MIIM_VSC8514_18G_CMDSTAT) && timeout--) + val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_GENERAL18); + + if (0 == timeout) { + printf("PHY 8514 config failed\n"); + return -1; + } + + phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS, 0); + + /* configure register to access 23 */ + val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_GENERAL23); + /* set bits 10:8 to '000' */ + val = (val & 0xf8ff); + phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_GENERAL23, val); + + genphy_config_aneg(phydev); + + return 0; +} + static struct phy_driver VSC8211_driver = { .name = "Vitesse VSC8211", .uid = 0xfc4b0, @@ -238,6 +294,16 @@ static struct phy_driver VSC8574_driver = { .shutdown = &genphy_shutdown, }; +static struct phy_driver VSC8514_driver = { + .name = "Vitesse VSC8514", + .uid = 0x70570, + .mask = 0xffff0, + .features = PHY_GBIT_FEATURES, + .config = &vsc8514_config, + .startup = &vitesse_startup, + .shutdown = &genphy_shutdown, +}; + static struct phy_driver VSC8601_driver = { .name = "Vitesse VSC8601", .uid = 0x70420, @@ -298,6 +364,7 @@ int phy_vitesse_init(void) phy_register(&VSC8211_driver); phy_register(&VSC8221_driver); phy_register(&VSC8574_driver); + phy_register(&VSC8514_driver); phy_register(&VSC8662_driver); phy_register(&cis8201_driver); phy_register(&cis8204_driver); diff --git a/drivers/net/rtl8139.c b/drivers/net/rtl8139.c index 4186699ff9..208ce5ccc4 100644 --- a/drivers/net/rtl8139.c +++ b/drivers/net/rtl8139.c @@ -188,7 +188,7 @@ static int rtl_transmit(struct eth_device *dev, void *packet, int length); static int rtl_poll(struct eth_device *dev); static void rtl_disable(struct eth_device *dev); #ifdef CONFIG_MCAST_TFTP/* This driver already accepts all b/mcast */ -static int rtl_bcast_addr (struct eth_device *dev, u8 bcast_mac, u8 set) +static int rtl_bcast_addr(struct eth_device *dev, const u8 *bcast_mac, u8 set) { return (0); } diff --git a/drivers/net/rtl8169.c b/drivers/net/rtl8169.c index 13fa9c02fe..d040ab171b 100644 --- a/drivers/net/rtl8169.c +++ b/drivers/net/rtl8169.c @@ -246,6 +246,8 @@ static struct { {"RTL-8169sc/8110sc", 0x18, 0xff7e1880,}, {"RTL-8168b/8111sb", 0x30, 0xff7e1880,}, {"RTL-8168b/8111sb", 0x38, 0xff7e1880,}, + {"RTL-8168d/8111d", 0x28, 0xff7e1880,}, + {"RTL-8168evl/8111evl", 0x2e, 0xff7e1880,}, {"RTL-8101e", 0x34, 0xff7e1880,}, {"RTL-8100e", 0x32, 0xff7e1880,}, }; @@ -314,6 +316,7 @@ static const unsigned int rtl8169_rx_config = static struct pci_device_id supported[] = { {PCI_VENDOR_ID_REALTEK, 0x8167}, + {PCI_VENDOR_ID_REALTEK, 0x8168}, {PCI_VENDOR_ID_REALTEK, 0x8169}, {} }; @@ -394,6 +397,50 @@ match: return 0; } +/* + * Cache maintenance functions. These are simple wrappers around the more + * general purpose flush_cache() and invalidate_dcache_range() functions. + */ + +static void rtl_inval_rx_desc(struct RxDesc *desc) +{ + unsigned long start = (unsigned long)desc & ~(ARCH_DMA_MINALIGN - 1); + unsigned long end = ALIGN(start + sizeof(*desc), ARCH_DMA_MINALIGN); + + invalidate_dcache_range(start, end); +} + +static void rtl_flush_rx_desc(struct RxDesc *desc) +{ + flush_cache((unsigned long)desc, sizeof(*desc)); +} + +static void rtl_inval_tx_desc(struct TxDesc *desc) +{ + unsigned long start = (unsigned long)desc & ~(ARCH_DMA_MINALIGN - 1); + unsigned long end = ALIGN(start + sizeof(*desc), ARCH_DMA_MINALIGN); + + invalidate_dcache_range(start, end); +} + +static void rtl_flush_tx_desc(struct TxDesc *desc) +{ + flush_cache((unsigned long)desc, sizeof(*desc)); +} + +static void rtl_inval_buffer(void *buf, size_t size) +{ + unsigned long start = (unsigned long)buf & ~(ARCH_DMA_MINALIGN - 1); + unsigned long end = ALIGN(start + size, ARCH_DMA_MINALIGN); + + invalidate_dcache_range(start, end); +} + +static void rtl_flush_buffer(void *buf, size_t size) +{ + flush_cache((unsigned long)buf, size); +} + /************************************************************************** RECV - Receive a frame ***************************************************************************/ @@ -411,14 +458,16 @@ static int rtl_recv(struct eth_device *dev) ioaddr = dev->iobase; cur_rx = tpc->cur_rx; - flush_cache((unsigned long)&tpc->RxDescArray[cur_rx], - sizeof(struct RxDesc)); + + rtl_inval_rx_desc(&tpc->RxDescArray[cur_rx]); + if ((le32_to_cpu(tpc->RxDescArray[cur_rx].status) & OWNbit) == 0) { if (!(le32_to_cpu(tpc->RxDescArray[cur_rx].status) & RxRES)) { unsigned char rxdata[RX_BUF_LEN]; length = (int) (le32_to_cpu(tpc->RxDescArray[cur_rx]. status) & 0x00001FFF) - 4; + rtl_inval_buffer(tpc->RxBufferRing[cur_rx], length); memcpy(rxdata, tpc->RxBufferRing[cur_rx], length); NetReceive(rxdata, length); @@ -430,8 +479,7 @@ static int rtl_recv(struct eth_device *dev) cpu_to_le32(OWNbit + RX_BUF_SIZE); tpc->RxDescArray[cur_rx].buf_addr = cpu_to_le32(bus_to_phys(tpc->RxBufferRing[cur_rx])); - flush_cache((unsigned long)tpc->RxBufferRing[cur_rx], - RX_BUF_SIZE); + rtl_flush_rx_desc(&tpc->RxDescArray[cur_rx]); } else { puts("Error Rx"); } @@ -473,7 +521,7 @@ static int rtl_send(struct eth_device *dev, void *packet, int length) /* point to the current txb incase multiple tx_rings are used */ ptxb = tpc->Tx_skbuff[entry * MAX_ETH_FRAME_SIZE]; memcpy(ptxb, (char *)packet, (int)length); - flush_cache((unsigned long)ptxb, length); + rtl_flush_buffer(ptxb, length); while (len < ETH_ZLEN) ptxb[len++] = '\0'; @@ -489,20 +537,20 @@ static int rtl_send(struct eth_device *dev, void *packet, int length) cpu_to_le32((OWNbit | EORbit | FSbit | LSbit) | ((len > ETH_ZLEN) ? len : ETH_ZLEN)); } + rtl_flush_tx_desc(&tpc->TxDescArray[entry]); RTL_W8(TxPoll, 0x40); /* set polling bit */ tpc->cur_tx++; to = currticks() + TX_TIMEOUT; do { - flush_cache((unsigned long)&tpc->TxDescArray[entry], - sizeof(struct TxDesc)); + rtl_inval_tx_desc(&tpc->TxDescArray[entry]); } while ((le32_to_cpu(tpc->TxDescArray[entry].status) & OWNbit) && (currticks() < to)); /* wait */ if (currticks() >= to) { #ifdef DEBUG_RTL8169_TX - puts ("tx timeout/error\n"); - printf ("%s elapsed time : %d\n", __FUNCTION__, currticks()-stime); + puts("tx timeout/error\n"); + printf("%s elapsed time : %lu\n", __func__, currticks()-stime); #endif ret = 0; } else { @@ -604,7 +652,7 @@ static void rtl8169_hw_start(struct eth_device *dev) RTL_W16(MultiIntr, RTL_R16(MultiIntr) & 0xF000); #ifdef DEBUG_RTL8169 - printf ("%s elapsed time : %d\n", __FUNCTION__, currticks()-stime); + printf("%s elapsed time : %lu\n", __func__, currticks()-stime); #endif } @@ -638,11 +686,11 @@ static void rtl8169_init_ring(struct eth_device *dev) tpc->RxBufferRing[i] = &rxb[i * RX_BUF_SIZE]; tpc->RxDescArray[i].buf_addr = cpu_to_le32(bus_to_phys(tpc->RxBufferRing[i])); - flush_cache((unsigned long)tpc->RxBufferRing[i], RX_BUF_SIZE); + rtl_flush_rx_desc(&tpc->RxDescArray[i]); } #ifdef DEBUG_RTL8169 - printf ("%s elapsed time : %d\n", __FUNCTION__, currticks()-stime); + printf("%s elapsed time : %lu\n", __func__, currticks()-stime); #endif } @@ -683,7 +731,7 @@ static int rtl_reset(struct eth_device *dev, bd_t *bis) txb[5] = dev->enetaddr[5]; #ifdef DEBUG_RTL8169 - printf ("%s elapsed time : %d\n", __FUNCTION__, currticks()-stime); + printf("%s elapsed time : %lu\n", __func__, currticks()-stime); #endif return 0; } @@ -869,11 +917,25 @@ int rtl8169_initialize(bd_t *bis) int idx=0; while(1){ + unsigned int region; + u16 device; + /* Find RTL8169 */ if ((devno = pci_find_devices(supported, idx++)) < 0) break; - pci_read_config_dword(devno, PCI_BASE_ADDRESS_1, &iobase); + pci_read_config_word(devno, PCI_DEVICE_ID, &device); + switch (device) { + case 0x8168: + region = 2; + break; + + default: + region = 1; + break; + } + + pci_read_config_dword(devno, PCI_BASE_ADDRESS_0 + (region * 4), &iobase); iobase &= ~0xf; debug ("rtl8169: REALTEK RTL8169 @0x%x\n", iobase); diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c index d5a83e0bf5..5e132f2b53 100644 --- a/drivers/net/sh_eth.c +++ b/drivers/net/sh_eth.c @@ -4,6 +4,7 @@ * Copyright (C) 2008, 2011 Renesas Solutions Corp. * Copyright (c) 2008, 2011 Nobuhiro Iwamatsu * Copyright (c) 2007 Carlos Munoz <carlos@kenati.com> + * Copyright (C) 2013 Renesas Electronics Corporation * * SPDX-License-Identifier: GPL-2.0+ */ @@ -25,13 +26,31 @@ #ifndef CONFIG_SH_ETHER_PHY_ADDR # error "Please define CONFIG_SH_ETHER_PHY_ADDR" #endif -#ifdef CONFIG_SH_ETHER_CACHE_WRITEBACK -#define flush_cache_wback(addr, len) \ - dcache_wback_range((u32)addr, (u32)(addr + len - 1)) + +#if defined(CONFIG_SH_ETHER_CACHE_WRITEBACK) && !defined(CONFIG_SYS_DCACHE_OFF) +#define flush_cache_wback(addr, len) \ + flush_dcache_range((u32)addr, (u32)(addr + len - 1)) #else #define flush_cache_wback(...) #endif +#if defined(CONFIG_SH_ETHER_CACHE_INVALIDATE) && defined(CONFIG_ARM) +#define invalidate_cache(addr, len) \ + { \ + u32 line_size = CONFIG_SH_ETHER_ALIGNE_SIZE; \ + u32 start, end; \ + \ + start = (u32)addr; \ + end = start + len; \ + start &= ~(line_size - 1); \ + end = ((end + line_size - 1) & ~(line_size - 1)); \ + \ + invalidate_dcache_range(start, end); \ + } +#else +#define invalidate_cache(...) +#endif + #define TIMEOUT_CNT 1000 int sh_eth_send(struct eth_device *dev, void *packet, int len) @@ -69,8 +88,11 @@ int sh_eth_send(struct eth_device *dev, void *packet, int len) /* Wait until packet is transmitted */ timeout = TIMEOUT_CNT; - while (port_info->tx_desc_cur->td0 & TD_TACT && timeout--) + do { + invalidate_cache(port_info->tx_desc_cur, + sizeof(struct tx_desc_s)); udelay(100); + } while (port_info->tx_desc_cur->td0 & TD_TACT && timeout--); if (timeout < 0) { printf(SHETHER_NAME ": transmit timeout\n"); @@ -94,12 +116,14 @@ int sh_eth_recv(struct eth_device *dev) uchar *packet; /* Check if the rx descriptor is ready */ + invalidate_cache(port_info->rx_desc_cur, sizeof(struct rx_desc_s)); if (!(port_info->rx_desc_cur->rd0 & RD_RACT)) { /* Check for errors */ if (!(port_info->rx_desc_cur->rd0 & RD_RFE)) { len = port_info->rx_desc_cur->rd1 & 0xffff; packet = (uchar *) ADDR_TO_P2(port_info->rx_desc_cur->rd2); + invalidate_cache(packet, len); NetReceive(packet, len); } @@ -108,7 +132,6 @@ int sh_eth_recv(struct eth_device *dev) port_info->rx_desc_cur->rd0 = RD_RACT | RD_RDLE; else port_info->rx_desc_cur->rd0 = RD_RACT; - /* Point to the next descriptor */ port_info->rx_desc_cur++; if (port_info->rx_desc_cur >= @@ -237,15 +260,17 @@ static int sh_eth_rx_desc_init(struct sh_eth_dev *eth) * Allocate rx data buffers. They must be 32 bytes aligned and in * P2 area */ - port_info->rx_buf_malloc = malloc(NUM_RX_DESC * MAX_BUF_SIZE + 31); + port_info->rx_buf_malloc = malloc( + NUM_RX_DESC * MAX_BUF_SIZE + RX_BUF_ALIGNE_SIZE - 1); if (!port_info->rx_buf_malloc) { printf(SHETHER_NAME ": malloc failed\n"); ret = -ENOMEM; goto err_buf_malloc; } - tmp_addr = (u32)(((int)port_info->rx_buf_malloc + (32 - 1)) & - ~(32 - 1)); + tmp_addr = (u32)(((int)port_info->rx_buf_malloc + + (RX_BUF_ALIGNE_SIZE - 1)) & + ~(RX_BUF_ALIGNE_SIZE - 1)); port_info->rx_buf_base = (u8 *)ADDR_TO_P2(tmp_addr); /* Initialize all descriptors */ @@ -351,8 +376,9 @@ static int sh_eth_config(struct sh_eth_dev *eth, bd_t *bd) struct phy_device *phy; /* Configure e-dmac registers */ - sh_eth_write(eth, (sh_eth_read(eth, EDMR) & ~EMDR_DESC_R) | EDMR_EL, - EDMR); + sh_eth_write(eth, (sh_eth_read(eth, EDMR) & ~EMDR_DESC_R) | + (EMDR_DESC | EDMR_EL), EDMR); + sh_eth_write(eth, 0, EESIPR); sh_eth_write(eth, 0, TRSCER); sh_eth_write(eth, 0, TFTR); @@ -384,6 +410,8 @@ static int sh_eth_config(struct sh_eth_dev *eth, bd_t *bd) #if defined(CONFIG_CPU_SH7734) || defined(CONFIG_R8A7740) sh_eth_write(eth, CONFIG_SH_ETHER_SH7734_MII, RMII_MII); +#elif defined(CONFIG_R8A7790) || defined(CONFIG_R8A7791) + sh_eth_write(eth, sh_eth_read(eth, RMIIMR) | 0x1, RMIIMR); #endif /* Configure phy */ ret = sh_eth_phy_config(eth); @@ -407,7 +435,8 @@ static int sh_eth_config(struct sh_eth_dev *eth, bd_t *bd) sh_eth_write(eth, GECMR_100B, GECMR); #elif defined(CONFIG_CPU_SH7757) || defined(CONFIG_CPU_SH7752) sh_eth_write(eth, 1, RTRATE); -#elif defined(CONFIG_CPU_SH7724) +#elif defined(CONFIG_CPU_SH7724) || defined(CONFIG_R8A7790) || \ + defined(CONFIG_R8A7791) val = ECMR_RTM; #endif } else if (phy->speed == 10) { diff --git a/drivers/net/sh_eth.h b/drivers/net/sh_eth.h index 9ad800e427..8aa71098cb 100644 --- a/drivers/net/sh_eth.h +++ b/drivers/net/sh_eth.h @@ -31,6 +31,11 @@ #define ADDR_TO_P2(addr) (addr) #endif /* defined(CONFIG_SH) */ +/* base padding size is 16 */ +#ifndef CONFIG_SH_ETHER_ALIGNE_SIZE +#define CONFIG_SH_ETHER_ALIGNE_SIZE 16 +#endif + /* Number of supported ports */ #define MAX_PORT_NUM 2 @@ -45,15 +50,16 @@ /* The size of the tx descriptor is determined by how much padding is used. 4, 20, or 52 bytes of padding can be used */ -#define TX_DESC_PADDING 4 -#define TX_DESC_SIZE (12 + TX_DESC_PADDING) +#define TX_DESC_PADDING (CONFIG_SH_ETHER_ALIGNE_SIZE - 12) +/* same as CONFIG_SH_ETHER_ALIGNE_SIZE */ +#define TX_DESC_SIZE (12 + TX_DESC_PADDING) /* Tx descriptor. We always use 3 bytes of padding */ struct tx_desc_s { volatile u32 td0; u32 td1; u32 td2; /* Buffer start */ - u32 padding; + u8 padding[TX_DESC_PADDING]; /* aligned cache line size */ }; /* There is no limitation in the number of rx descriptors */ @@ -61,15 +67,18 @@ struct tx_desc_s { /* The size of the rx descriptor is determined by how much padding is used. 4, 20, or 52 bytes of padding can be used */ -#define RX_DESC_PADDING 4 +#define RX_DESC_PADDING (CONFIG_SH_ETHER_ALIGNE_SIZE - 12) +/* same as CONFIG_SH_ETHER_ALIGNE_SIZE */ #define RX_DESC_SIZE (12 + RX_DESC_PADDING) +/* aligned cache line size */ +#define RX_BUF_ALIGNE_SIZE (CONFIG_SH_ETHER_ALIGNE_SIZE > 32 ? 64 : 32) /* Rx descriptor. We always use 4 bytes of padding */ struct rx_desc_s { volatile u32 rd0; volatile u32 rd1; u32 rd2; /* Buffer start */ - u32 padding; + u8 padding[TX_DESC_PADDING]; /* aligned cache line size */ }; struct sh_eth_info { @@ -157,6 +166,7 @@ enum { TLFRCR, CERCR, CEECR, + RMIIMR, /* R8A7790 */ MAFCR, RTRATE, CSMR, @@ -263,6 +273,7 @@ static const u16 sh_eth_offset_fast_sh4[SH_ETH_MAX_REGISTER_OFFSET] = { [RMCR] = 0x0058, [TFUCR] = 0x0064, [RFOCR] = 0x0068, + [RMIIMR] = 0x006C, [FCFTR] = 0x0070, [RPADIR] = 0x0078, [TRIMD] = 0x007c, @@ -290,6 +301,9 @@ static const u16 sh_eth_offset_fast_sh4[SH_ETH_MAX_REGISTER_OFFSET] = { #elif defined(CONFIG_R8A7740) #define SH_ETH_TYPE_GETHER #define BASE_IO_ADDR 0xE9A00000 +#elif defined(CONFIG_R8A7790) || defined(CONFIG_R8A7791) +#define SH_ETH_TYPE_ETHER +#define BASE_IO_ADDR 0xEE700200 #endif /* @@ -320,6 +334,14 @@ enum DMAC_M_BIT { #endif }; +#if CONFIG_SH_ETHER_ALIGNE_SIZE == 64 +# define EMDR_DESC EDMR_DL1 +#elif CONFIG_SH_ETHER_ALIGNE_SIZE == 32 +# define EMDR_DESC EDMR_DL0 +#elif CONFIG_SH_ETHER_ALIGNE_SIZE == 16 /* Default */ +# define EMDR_DESC 0 +#endif + /* RFLR */ #define RFLR_RFL_MIN 0x05EE /* Recv Frame length 1518 byte */ @@ -485,6 +507,8 @@ enum FELIC_MODE_BIT { ECMR_PRM = 0x00000001, #ifdef CONFIG_CPU_SH7724 ECMR_RTM = 0x00000010, +#elif defined(CONFIG_R8A7790) || defined(CONFIG_R8A7791) + ECMR_RTM = 0x00000004, #endif }; diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c index f5e314b9ee..e9138f0338 100644 --- a/drivers/net/tsec.c +++ b/drivers/net/tsec.c @@ -5,7 +5,7 @@ * terms of the GNU Public License, Version 2, incorporated * herein by reference. * - * Copyright 2004-2011 Freescale Semiconductor, Inc. + * Copyright 2004-2011, 2013 Freescale Semiconductor, Inc. * (C) Copyright 2003, Motorola, Inc. * author Andy Fleming * @@ -25,21 +25,13 @@ DECLARE_GLOBAL_DATA_PTR; #define TX_BUF_CNT 2 -static uint rxIdx; /* index of the current RX buffer */ -static uint txIdx; /* index of the current TX buffer */ - -typedef volatile struct rtxbd { - txbd8_t txbd[TX_BUF_CNT]; - rxbd8_t rxbd[PKTBUFSRX]; -} RTXBD; - -#define MAXCONTROLLERS (8) - -static struct tsec_private *privlist[MAXCONTROLLERS]; -static int num_tsecs = 0; +static uint rx_idx; /* index of the current RX buffer */ +static uint tx_idx; /* index of the current TX buffer */ #ifdef __GNUC__ -static RTXBD rtx __attribute__ ((aligned(8))); +static struct txbd8 __iomem txbd[TX_BUF_CNT] __aligned(8); +static struct rxbd8 __iomem rxbd[PKTBUFSRX] __aligned(8); + #else #error "rtx must be 64-bit aligned" #endif @@ -57,7 +49,7 @@ static struct tsec_info_struct tsec_info[] = { #endif #ifdef CONFIG_MPC85XX_FEC { - .regs = (tsec_t *)(TSEC_BASE_ADDR + 0x2000), + .regs = TSEC_GET_REGS(2, 0x2000), .devname = CONFIG_MPC85XX_FEC_NAME, .phyaddr = FEC_PHY_ADDR, .flags = FEC_FLAGS, @@ -113,32 +105,31 @@ static void tsec_configure_serdes(struct tsec_private *priv) * result. * 2) Use the 8 most significant bits as a hash into a 256-entry * table. The table is controlled through 8 32-bit registers: - * gaddr0-7. gaddr0's MSB is entry 0, and gaddr7's LSB is - * gaddr7. This means that the 3 most significant bits in the + * gaddr0-7. gaddr0's MSB is entry 0, and gaddr7's LSB is entry + * 255. This means that the 3 most significant bits in the * hash index which gaddr register to use, and the 5 other bits * indicate which bit (assuming an IBM numbering scheme, which - * for PowerPC (tm) is usually the case) in the tregister holds + * for PowerPC (tm) is usually the case) in the register holds * the entry. */ static int -tsec_mcast_addr (struct eth_device *dev, u8 mcast_mac, u8 set) +tsec_mcast_addr(struct eth_device *dev, const u8 *mcast_mac, u8 set) { - struct tsec_private *priv = privlist[1]; - volatile tsec_t *regs = priv->regs; - volatile u32 *reg_array, value; - u8 result, whichbit, whichreg; - - result = (u8)((ether_crc(MAC_ADDR_LEN,mcast_mac) >> 24) & 0xff); - whichbit = result & 0x1f; /* the 5 LSB = which bit to set */ - whichreg = result >> 5; /* the 3 MSB = which reg to set it in */ - value = (1 << (31-whichbit)); - - reg_array = &(regs->hash.gaddr0); - - if (set) { - reg_array[whichreg] |= value; - } else { - reg_array[whichreg] &= ~value; - } + struct tsec_private *priv = (struct tsec_private *)dev->priv; + struct tsec __iomem *regs = priv->regs; + u32 result, value; + u8 whichbit, whichreg; + + result = ether_crc(MAC_ADDR_LEN, mcast_mac); + whichbit = (result >> 24) & 0x1f; /* the 5 LSB = which bit to set */ + whichreg = result >> 29; /* the 3 MSB = which reg to set it in */ + + value = 1 << (31-whichbit); + + if (set) + setbits_be32(®s->hash.gaddr0 + whichreg, value); + else + clrbits_be32(®s->hash.gaddr0 + whichreg, value); + return 0; } #endif /* Multicast TFTP ? */ @@ -147,7 +138,7 @@ tsec_mcast_addr (struct eth_device *dev, u8 mcast_mac, u8 set) * those we don't care about (unless zero is bad, in which case, * choose a more appropriate value) */ -static void init_registers(tsec_t *regs) +static void init_registers(struct tsec __iomem *regs) { /* Clear IEVENT */ out_be32(®s->ievent, IEVENT_INIT_CLEAR); @@ -175,7 +166,7 @@ static void init_registers(tsec_t *regs) out_be32(®s->rctrl, 0x00000000); /* Init RMON mib registers */ - memset((void *)&(regs->rmon), 0, sizeof(rmon_mib_t)); + memset((void *)®s->rmon, 0, sizeof(regs->rmon)); out_be32(®s->rmon.cam1, 0xffffffff); out_be32(®s->rmon.cam2, 0xffffffff); @@ -194,7 +185,7 @@ static void init_registers(tsec_t *regs) */ static void adjust_link(struct tsec_private *priv, struct phy_device *phydev) { - tsec_t *regs = priv->regs; + struct tsec __iomem *regs = priv->regs; u32 ecntrl, maccfg2; if (!phydev->link) { @@ -248,7 +239,7 @@ static void adjust_link(struct tsec_private *priv, struct phy_device *phydev) void redundant_init(struct eth_device *dev) { struct tsec_private *priv = dev->priv; - tsec_t *regs = priv->regs; + struct tsec __iomem *regs = priv->regs; uint t, count = 0; int fail = 1; static const u8 pkt[] = { @@ -281,23 +272,26 @@ void redundant_init(struct eth_device *dev) clrbits_be32(®s->dmactrl, DMACTRL_GRS | DMACTRL_GTS); do { + uint16_t status; tsec_send(dev, (void *)pkt, sizeof(pkt)); /* Wait for buffer to be received */ - for (t = 0; rtx.rxbd[rxIdx].status & RXBD_EMPTY; t++) { + for (t = 0; in_be16(&rxbd[rx_idx].status) & RXBD_EMPTY; t++) { if (t >= 10 * TOUT_LOOP) { printf("%s: tsec: rx error\n", dev->name); break; } } - if (!memcmp(pkt, (void *)NetRxPackets[rxIdx], sizeof(pkt))) + if (!memcmp(pkt, (void *)NetRxPackets[rx_idx], sizeof(pkt))) fail = 0; - rtx.rxbd[rxIdx].length = 0; - rtx.rxbd[rxIdx].status = - RXBD_EMPTY | (((rxIdx + 1) == PKTBUFSRX) ? RXBD_WRAP : 0); - rxIdx = (rxIdx + 1) % PKTBUFSRX; + out_be16(&rxbd[rx_idx].length, 0); + status = RXBD_EMPTY; + if ((rx_idx + 1) == PKTBUFSRX) + status |= RXBD_WRAP; + out_be16(&rxbd[rx_idx].status, status); + rx_idx = (rx_idx + 1) % PKTBUFSRX; if (in_be32(®s->ievent) & IEVENT_BSY) { out_be32(®s->ievent, IEVENT_BSY); @@ -325,36 +319,39 @@ void redundant_init(struct eth_device *dev) */ static void startup_tsec(struct eth_device *dev) { - int i; struct tsec_private *priv = (struct tsec_private *)dev->priv; - tsec_t *regs = priv->regs; + struct tsec __iomem *regs = priv->regs; + uint16_t status; + int i; /* reset the indices to zero */ - rxIdx = 0; - txIdx = 0; + rx_idx = 0; + tx_idx = 0; #ifdef CONFIG_SYS_FSL_ERRATUM_NMG_ETSEC129 uint svr; #endif /* Point to the buffer descriptors */ - out_be32(®s->tbase, (unsigned int)(&rtx.txbd[txIdx])); - out_be32(®s->rbase, (unsigned int)(&rtx.rxbd[rxIdx])); + out_be32(®s->tbase, (u32)&txbd[0]); + out_be32(®s->rbase, (u32)&rxbd[0]); /* Initialize the Rx Buffer descriptors */ for (i = 0; i < PKTBUFSRX; i++) { - rtx.rxbd[i].status = RXBD_EMPTY; - rtx.rxbd[i].length = 0; - rtx.rxbd[i].bufPtr = (uint) NetRxPackets[i]; + out_be16(&rxbd[i].status, RXBD_EMPTY); + out_be16(&rxbd[i].length, 0); + out_be32(&rxbd[i].bufptr, (u32)NetRxPackets[i]); } - rtx.rxbd[PKTBUFSRX - 1].status |= RXBD_WRAP; + status = in_be16(&rxbd[PKTBUFSRX - 1].status); + out_be16(&rxbd[PKTBUFSRX - 1].status, status | RXBD_WRAP); /* Initialize the TX Buffer Descriptors */ for (i = 0; i < TX_BUF_CNT; i++) { - rtx.txbd[i].status = 0; - rtx.txbd[i].length = 0; - rtx.txbd[i].bufPtr = 0; + out_be16(&txbd[i].status, 0); + out_be16(&txbd[i].length, 0); + out_be32(&txbd[i].bufptr, 0); } - rtx.txbd[TX_BUF_CNT - 1].status |= TXBD_WRAP; + status = in_be16(&txbd[TX_BUF_CNT - 1].status); + out_be16(&txbd[TX_BUF_CNT - 1].status, status | TXBD_WRAP); #ifdef CONFIG_SYS_FSL_ERRATUM_NMG_ETSEC129 svr = get_svr(); @@ -378,66 +375,67 @@ static void startup_tsec(struct eth_device *dev) */ static int tsec_send(struct eth_device *dev, void *packet, int length) { - int i; - int result = 0; struct tsec_private *priv = (struct tsec_private *)dev->priv; - tsec_t *regs = priv->regs; + struct tsec __iomem *regs = priv->regs; + uint16_t status; + int result = 0; + int i; /* Find an empty buffer descriptor */ - for (i = 0; rtx.txbd[txIdx].status & TXBD_READY; i++) { + for (i = 0; in_be16(&txbd[tx_idx].status) & TXBD_READY; i++) { if (i >= TOUT_LOOP) { debug("%s: tsec: tx buffers full\n", dev->name); return result; } } - rtx.txbd[txIdx].bufPtr = (uint) packet; - rtx.txbd[txIdx].length = length; - rtx.txbd[txIdx].status |= - (TXBD_READY | TXBD_LAST | TXBD_CRC | TXBD_INTERRUPT); + out_be32(&txbd[tx_idx].bufptr, (u32)packet); + out_be16(&txbd[tx_idx].length, length); + status = in_be16(&txbd[tx_idx].status); + out_be16(&txbd[tx_idx].status, status | + (TXBD_READY | TXBD_LAST | TXBD_CRC | TXBD_INTERRUPT)); /* Tell the DMA to go */ out_be32(®s->tstat, TSTAT_CLEAR_THALT); /* Wait for buffer to be transmitted */ - for (i = 0; rtx.txbd[txIdx].status & TXBD_READY; i++) { + for (i = 0; in_be16(&txbd[tx_idx].status) & TXBD_READY; i++) { if (i >= TOUT_LOOP) { debug("%s: tsec: tx error\n", dev->name); return result; } } - txIdx = (txIdx + 1) % TX_BUF_CNT; - result = rtx.txbd[txIdx].status & TXBD_STATS; + tx_idx = (tx_idx + 1) % TX_BUF_CNT; + result = in_be16(&txbd[tx_idx].status) & TXBD_STATS; return result; } static int tsec_recv(struct eth_device *dev) { - int length; struct tsec_private *priv = (struct tsec_private *)dev->priv; - tsec_t *regs = priv->regs; + struct tsec __iomem *regs = priv->regs; - while (!(rtx.rxbd[rxIdx].status & RXBD_EMPTY)) { - - length = rtx.rxbd[rxIdx].length; + while (!(in_be16(&rxbd[rx_idx].status) & RXBD_EMPTY)) { + int length = in_be16(&rxbd[rx_idx].length); + uint16_t status = in_be16(&rxbd[rx_idx].status); /* Send the packet up if there were no errors */ - if (!(rtx.rxbd[rxIdx].status & RXBD_STATS)) { - NetReceive(NetRxPackets[rxIdx], length - 4); - } else { - printf("Got error %x\n", - (rtx.rxbd[rxIdx].status & RXBD_STATS)); - } + if (!(status & RXBD_STATS)) + NetReceive(NetRxPackets[rx_idx], length - 4); + else + printf("Got error %x\n", (status & RXBD_STATS)); - rtx.rxbd[rxIdx].length = 0; + out_be16(&rxbd[rx_idx].length, 0); + status = RXBD_EMPTY; /* Set the wrap bit if this is the last element in the list */ - rtx.rxbd[rxIdx].status = - RXBD_EMPTY | (((rxIdx + 1) == PKTBUFSRX) ? RXBD_WRAP : 0); + if ((rx_idx + 1) == PKTBUFSRX) + status |= RXBD_WRAP; + out_be16(&rxbd[rx_idx].status, status); - rxIdx = (rxIdx + 1) % PKTBUFSRX; + rx_idx = (rx_idx + 1) % PKTBUFSRX; } if (in_be32(®s->ievent) & IEVENT_BSY) { @@ -453,7 +451,7 @@ static int tsec_recv(struct eth_device *dev) static void tsec_halt(struct eth_device *dev) { struct tsec_private *priv = (struct tsec_private *)dev->priv; - tsec_t *regs = priv->regs; + struct tsec __iomem *regs = priv->regs; clrbits_be32(®s->dmactrl, DMACTRL_GRS | DMACTRL_GTS); setbits_be32(®s->dmactrl, DMACTRL_GRS | DMACTRL_GTS); @@ -475,11 +473,9 @@ static void tsec_halt(struct eth_device *dev) */ static int tsec_init(struct eth_device *dev, bd_t * bd) { - uint tempval; - char tmpbuf[MAC_ADDR_LEN]; - int i; struct tsec_private *priv = (struct tsec_private *)dev->priv; - tsec_t *regs = priv->regs; + struct tsec __iomem *regs = priv->regs; + u32 tempval; int ret; /* Make sure the controller is stopped */ @@ -492,16 +488,16 @@ static int tsec_init(struct eth_device *dev, bd_t * bd) out_be32(®s->ecntrl, ECNTRL_INIT_SETTINGS); /* Copy the station address into the address registers. - * Backwards, because little endian MACS are dumb */ - for (i = 0; i < MAC_ADDR_LEN; i++) - tmpbuf[MAC_ADDR_LEN - 1 - i] = dev->enetaddr[i]; - - tempval = (tmpbuf[0] << 24) | (tmpbuf[1] << 16) | (tmpbuf[2] << 8) | - tmpbuf[3]; + * For a station address of 0x12345678ABCD in transmission + * order (BE), MACnADDR1 is set to 0xCDAB7856 and + * MACnADDR2 is set to 0x34120000. + */ + tempval = (dev->enetaddr[5] << 24) | (dev->enetaddr[4] << 16) | + (dev->enetaddr[3] << 8) | dev->enetaddr[2]; out_be32(®s->macstnaddr1, tempval); - tempval = *((uint *) (tmpbuf + 4)); + tempval = (dev->enetaddr[1] << 24) | (dev->enetaddr[0] << 16); out_be32(®s->macstnaddr2, tempval); @@ -527,7 +523,7 @@ static int tsec_init(struct eth_device *dev, bd_t * bd) static phy_interface_t tsec_get_interface(struct tsec_private *priv) { - tsec_t *regs = priv->regs; + struct tsec __iomem *regs = priv->regs; u32 ecntrl; ecntrl = in_be32(®s->ecntrl); @@ -576,7 +572,7 @@ static int init_phy(struct eth_device *dev) { struct tsec_private *priv = (struct tsec_private *)dev->priv; struct phy_device *phydev; - tsec_t *regs = priv->regs; + struct tsec __iomem *regs = priv->regs; u32 supported = (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | SUPPORTED_100baseT_Half | @@ -626,7 +622,6 @@ static int tsec_initialize(bd_t *bis, struct tsec_info_struct *tsec_info) if (NULL == priv) return 0; - privlist[num_tsecs++] = priv; priv->regs = tsec_info->regs; priv->phyregs_sgmii = tsec_info->miiregs_sgmii; @@ -684,7 +679,7 @@ int tsec_standard_init(bd_t *bis) { struct fsl_pq_mdio_info info; - info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR; + info.regs = TSEC_GET_MDIO_REGS_BASE(1); info.name = DEFAULT_MII_NAME; fsl_pq_mdio_init(bis, &info); diff --git a/drivers/net/zynq_gem.c b/drivers/net/zynq_gem.c index 236a75311f..6a017a8102 100644 --- a/drivers/net/zynq_gem.c +++ b/drivers/net/zynq_gem.c @@ -43,11 +43,6 @@ #define ZYNQ_GEM_TXBUF_WRAP_MASK 0x40000000 #define ZYNQ_GEM_TXBUF_LAST_MASK 0x00008000 /* Last buffer */ -#define ZYNQ_GEM_TXSR_HRESPNOK_MASK 0x00000100 /* Transmit hresp not OK */ -#define ZYNQ_GEM_TXSR_URUN_MASK 0x00000040 /* Transmit underrun */ -/* Transmit buffs exhausted mid frame */ -#define ZYNQ_GEM_TXSR_BUFEXH_MASK 0x00000010 - #define ZYNQ_GEM_NWCTRL_TXEN_MASK 0x00000008 /* Enable transmit */ #define ZYNQ_GEM_NWCTRL_RXEN_MASK 0x00000004 /* Enable receive */ #define ZYNQ_GEM_NWCTRL_MDEN_MASK 0x00000010 /* Enable MDIO port */ @@ -90,6 +85,11 @@ */ #define PHY_DETECT_MASK 0x1808 +/* TX BD status masks */ +#define ZYNQ_GEM_TXBUF_FRMLEN_MASK 0x000007ff +#define ZYNQ_GEM_TXBUF_EXHAUSTED 0x08000000 +#define ZYNQ_GEM_TXBUF_UNDERRUN 0x10000000 + /* Device registers */ struct zynq_gem_regs { u32 nwctrl; /* Network Control reg */ @@ -123,12 +123,18 @@ struct emac_bd { }; #define RX_BUF 3 +/* Page table entries are set to 1MB, or multiples of 1MB + * (not < 1MB). driver uses less bd's so use 1MB bdspace. + */ +#define BD_SPACE 0x100000 +/* BD separation space */ +#define BD_SEPRN_SPACE 64 /* Initialized, rxbd_current, rx_first_buf must be 0 after init */ struct zynq_gem_priv { - struct emac_bd tx_bd; - struct emac_bd rx_bd[RX_BUF]; - char rxbuffers[RX_BUF * PKTSIZE_ALIGN]; + struct emac_bd *tx_bd; + struct emac_bd *rx_bd; + char *rxbuffers; u32 rxbd_current; u32 rx_first_buf; int phyaddr; @@ -299,20 +305,18 @@ static int zynq_gem_init(struct eth_device *dev, bd_t * bis) readl(®s->stat[i]); /* Setup RxBD space */ - memset(&(priv->rx_bd), 0, sizeof(priv->rx_bd)); - /* Create the RxBD ring */ - memset(&(priv->rxbuffers), 0, sizeof(priv->rxbuffers)); + memset(priv->rx_bd, 0, RX_BUF * sizeof(struct emac_bd)); for (i = 0; i < RX_BUF; i++) { priv->rx_bd[i].status = 0xF0000000; priv->rx_bd[i].addr = - (u32)((char *)&(priv->rxbuffers) + + ((u32)(priv->rxbuffers) + (i * PKTSIZE_ALIGN)); } /* WRAP bit to last BD */ priv->rx_bd[--i].addr |= ZYNQ_GEM_RXBUF_WRAP_MASK; /* Write RxBDs to IP */ - writel((u32)&(priv->rx_bd), ®s->rxqbase); + writel((u32)priv->rx_bd, ®s->rxqbase); /* Setup for DMA Configuration register */ writel(ZYNQ_GEM_DMACR_INIT, ®s->dmacr); @@ -368,32 +372,35 @@ static int zynq_gem_init(struct eth_device *dev, bd_t * bis) static int zynq_gem_send(struct eth_device *dev, void *ptr, int len) { - u32 status; + u32 addr, size; struct zynq_gem_priv *priv = dev->priv; struct zynq_gem_regs *regs = (struct zynq_gem_regs *)dev->iobase; - const u32 mask = ZYNQ_GEM_TXSR_HRESPNOK_MASK | \ - ZYNQ_GEM_TXSR_URUN_MASK | ZYNQ_GEM_TXSR_BUFEXH_MASK; /* setup BD */ - writel((u32)&(priv->tx_bd), ®s->txqbase); + writel((u32)priv->tx_bd, ®s->txqbase); /* Setup Tx BD */ - memset((void *)&(priv->tx_bd), 0, sizeof(struct emac_bd)); + memset(priv->tx_bd, 0, sizeof(struct emac_bd)); + + priv->tx_bd->addr = (u32)ptr; + priv->tx_bd->status = (len & ZYNQ_GEM_TXBUF_FRMLEN_MASK) | + ZYNQ_GEM_TXBUF_LAST_MASK; - priv->tx_bd.addr = (u32)ptr; - priv->tx_bd.status = len | ZYNQ_GEM_TXBUF_LAST_MASK; + addr = (u32) ptr; + addr &= ~(ARCH_DMA_MINALIGN - 1); + size = roundup(len, ARCH_DMA_MINALIGN); + flush_dcache_range(addr, addr + size); + barrier(); /* Start transmit */ setbits_le32(®s->nwctrl, ZYNQ_GEM_NWCTRL_STARTTX_MASK); - /* Read the stat register to know if the packet has been transmitted */ - status = readl(®s->txsr); - if (status & mask) - printf("Something has gone wrong here!? Status is 0x%x.\n", - status); + /* Read TX BD status */ + if (priv->tx_bd->status & ZYNQ_GEM_TXBUF_UNDERRUN) + printf("TX underrun\n"); + if (priv->tx_bd->status & ZYNQ_GEM_TXBUF_EXHAUSTED) + printf("TX buffers exhausted in mid frame\n"); - /* Clear Tx status register before leaving . */ - writel(status, ®s->txsr); return 0; } @@ -416,8 +423,12 @@ static int zynq_gem_recv(struct eth_device *dev) frame_len = current_bd->status & ZYNQ_GEM_RXBUF_LEN_MASK; if (frame_len) { - NetReceive((u8 *) (current_bd->addr & - ZYNQ_GEM_RXBUF_ADD_MASK), frame_len); + u32 addr = current_bd->addr & ZYNQ_GEM_RXBUF_ADD_MASK; + addr &= ~(ARCH_DMA_MINALIGN - 1); + u32 size = roundup(frame_len, ARCH_DMA_MINALIGN); + invalidate_dcache_range(addr, addr + size); + + NetReceive((u8 *)addr, frame_len); if (current_bd->status & ZYNQ_GEM_RXBUF_SOF_MASK) priv->rx_first_buf = priv->rxbd_current; @@ -471,6 +482,7 @@ int zynq_gem_initialize(bd_t *bis, int base_addr, int phy_addr, u32 emio) { struct eth_device *dev; struct zynq_gem_priv *priv; + void *bd_space; dev = calloc(1, sizeof(*dev)); if (dev == NULL) @@ -483,6 +495,18 @@ int zynq_gem_initialize(bd_t *bis, int base_addr, int phy_addr, u32 emio) } priv = dev->priv; + /* Align rxbuffers to ARCH_DMA_MINALIGN */ + priv->rxbuffers = memalign(ARCH_DMA_MINALIGN, RX_BUF * PKTSIZE_ALIGN); + memset(priv->rxbuffers, 0, RX_BUF * PKTSIZE_ALIGN); + + /* Align bd_space to 1MB */ + bd_space = memalign(1 << MMU_SECTION_SHIFT, BD_SPACE); + mmu_set_region_dcache_behaviour((u32)bd_space, BD_SPACE, DCACHE_OFF); + + /* Initialize the bd spaces for tx and rx bd's */ + priv->tx_bd = (struct emac_bd *)bd_space; + priv->rx_bd = (struct emac_bd *)((u32)bd_space + BD_SEPRN_SPACE); + priv->phyaddr = phy_addr; priv->emio = emio; diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index 99d51a6a97..6182a5904d 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_FSL_PCI_INIT) += fsl_pci_init.o obj-$(CONFIG_PCI) += pci.o pci_auto.o obj-$(CONFIG_PCI_INDIRECT_BRIDGE) += pci_indirect.o obj-$(CONFIG_PCI_GT64120) += pci_gt64120.o +obj-$(CONFIG_PCI_MSC01) += pci_msc01.o obj-$(CONFIG_FTPCI100) += pci_ftpci100.o obj-$(CONFIG_IXP_PCI) += pci_ixp.o obj-$(CONFIG_SH4_PCI) += pci_sh4.o diff --git a/drivers/pci/pci_msc01.c b/drivers/pci/pci_msc01.c new file mode 100644 index 0000000000..284ffa09b6 --- /dev/null +++ b/drivers/pci/pci_msc01.c @@ -0,0 +1,125 @@ +/* + * Copyright (C) 2013 Imagination Technologies + * Author: Paul Burton <paul.burton@imgtec.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <msc01.h> +#include <pci.h> +#include <pci_msc01.h> +#include <asm/io.h> + +#define PCI_ACCESS_READ 0 +#define PCI_ACCESS_WRITE 1 + +struct msc01_pci_controller { + struct pci_controller hose; + void *base; +}; + +static inline struct msc01_pci_controller * +hose_to_msc01(struct pci_controller *hose) +{ + return container_of(hose, struct msc01_pci_controller, hose); +} + +static int msc01_config_access(struct msc01_pci_controller *msc01, + unsigned char access_type, pci_dev_t bdf, + int where, u32 *data) +{ + const u32 aborts = MSC01_PCI_INTSTAT_MA_MSK | MSC01_PCI_INTSTAT_TA_MSK; + void *intstat = msc01->base + MSC01_PCI_INTSTAT_OFS; + void *cfgdata = msc01->base + MSC01_PCI_CFGDATA_OFS; + unsigned int bus = PCI_BUS(bdf); + unsigned int dev = PCI_DEV(bdf); + unsigned int devfn = PCI_DEV(bdf) << 3 | PCI_FUNC(bdf); + + /* clear abort status */ + __raw_writel(aborts, intstat); + + /* setup address */ + __raw_writel((bus << MSC01_PCI_CFGADDR_BNUM_SHF) | + (dev << MSC01_PCI_CFGADDR_DNUM_SHF) | + (devfn << MSC01_PCI_CFGADDR_FNUM_SHF) | + ((where / 4) << MSC01_PCI_CFGADDR_RNUM_SHF), + msc01->base + MSC01_PCI_CFGADDR_OFS); + + /* perform access */ + if (access_type == PCI_ACCESS_WRITE) + __raw_writel(*data, cfgdata); + else + *data = __raw_readl(cfgdata); + + /* check for aborts */ + if (__raw_readl(intstat) & aborts) { + /* clear abort status */ + __raw_writel(aborts, intstat); + return -1; + } + + return 0; +} + +static int msc01_read_config_dword(struct pci_controller *hose, pci_dev_t dev, + int where, u32 *value) +{ + struct msc01_pci_controller *msc01 = hose_to_msc01(hose); + + *value = 0xffffffff; + return msc01_config_access(msc01, PCI_ACCESS_READ, dev, where, value); +} + +static int msc01_write_config_dword(struct pci_controller *hose, pci_dev_t dev, + int where, u32 value) +{ + struct msc01_pci_controller *gt = hose_to_msc01(hose); + u32 data = value; + + return msc01_config_access(gt, PCI_ACCESS_WRITE, dev, where, &data); +} + +void msc01_pci_init(void *base, unsigned long sys_bus, unsigned long sys_phys, + unsigned long sys_size, unsigned long mem_bus, + unsigned long mem_phys, unsigned long mem_size, + unsigned long io_bus, unsigned long io_phys, + unsigned long io_size) +{ + static struct msc01_pci_controller global_msc01; + struct msc01_pci_controller *msc01; + struct pci_controller *hose; + + msc01 = &global_msc01; + msc01->base = base; + + hose = &msc01->hose; + + hose->first_busno = 0; + hose->last_busno = 0; + + /* System memory space */ + pci_set_region(&hose->regions[0], sys_bus, sys_phys, sys_size, + PCI_REGION_MEM | PCI_REGION_SYS_MEMORY); + + /* PCI memory space */ + pci_set_region(&hose->regions[1], mem_bus, mem_phys, mem_size, + PCI_REGION_MEM); + + /* PCI I/O space */ + pci_set_region(&hose->regions[2], io_bus, io_phys, io_size, + PCI_REGION_IO); + + hose->region_count = 3; + + pci_set_ops(hose, + pci_hose_read_config_byte_via_dword, + pci_hose_read_config_word_via_dword, + msc01_read_config_dword, + pci_hose_write_config_byte_via_dword, + pci_hose_write_config_word_via_dword, + msc01_write_config_dword); + + pci_register_hose(hose); + hose->last_busno = pci_hose_scan(hose); +} diff --git a/drivers/qe/Makefile b/drivers/qe/Makefile index b8c15f8e1f..7f1bd06922 100644 --- a/drivers/qe/Makefile +++ b/drivers/qe/Makefile @@ -4,5 +4,5 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-$(and $(CONFIG_QE),$(CONFIG_OF_LIBFDT)) += fdt.o -obj-$(CONFIG_QE) += qe.o uccf.o uec.o uec_phy.o +obj-y := qe.o uccf.o uec.o uec_phy.o +obj-$(CONFIG_OF_LIBFDT) += fdt.o diff --git a/drivers/rtc/mc146818.c b/drivers/rtc/mc146818.c index 5f9d359590..f7cf1064f9 100644 --- a/drivers/rtc/mc146818.c +++ b/drivers/rtc/mc146818.c @@ -15,7 +15,7 @@ #include <command.h> #include <rtc.h> -#ifdef __I386__ +#if defined(__I386__) || defined(CONFIG_MALTA) #include <asm/io.h> #define in8(p) inb(p) #define out8(p, v) outb(v, p) diff --git a/drivers/spi/omap3_spi.c b/drivers/spi/omap3_spi.c index e80be8eaac..a3ad056473 100644 --- a/drivers/spi/omap3_spi.c +++ b/drivers/spi/omap3_spi.c @@ -20,8 +20,7 @@ #include <asm/io.h> #include "omap3_spi.h" -#define WORD_LEN 8 -#define SPI_WAIT_TIMEOUT 3000000; +#define SPI_WAIT_TIMEOUT 3000000 static void spi_reset(struct omap3_spi_slave *ds) { @@ -185,7 +184,7 @@ int spi_claim_bus(struct spi_slave *slave) /* wordlength */ conf &= ~OMAP3_MCSPI_CHCONF_WL_MASK; - conf |= (WORD_LEN - 1) << 7; + conf |= (ds->slave.wordlen - 1) << 7; /* set chipselect polarity; manage with FORCE */ if (!(ds->mode & SPI_CS_HIGH)) @@ -223,7 +222,7 @@ void spi_release_bus(struct spi_slave *slave) spi_reset(ds); } -int omap3_spi_write(struct spi_slave *slave, unsigned int len, const u8 *txp, +int omap3_spi_write(struct spi_slave *slave, unsigned int len, const void *txp, unsigned long flags) { struct omap3_spi_slave *ds = to_omap3_spi(slave); @@ -234,7 +233,8 @@ int omap3_spi_write(struct spi_slave *slave, unsigned int len, const u8 *txp, /* Enable the channel */ omap3_spi_set_enable(ds,OMAP3_MCSPI_CHCTRL_EN); - chconf &= ~OMAP3_MCSPI_CHCONF_TRM_MASK; + chconf &= ~(OMAP3_MCSPI_CHCONF_TRM_MASK | OMAP3_MCSPI_CHCONF_WL_MASK); + chconf |= (ds->slave.wordlen - 1) << 7; chconf |= OMAP3_MCSPI_CHCONF_TRM_TX_ONLY; chconf |= OMAP3_MCSPI_CHCONF_FORCE; omap3_spi_write_chconf(ds,chconf); @@ -250,7 +250,13 @@ int omap3_spi_write(struct spi_slave *slave, unsigned int len, const u8 *txp, } } /* Write the data */ - writel(txp[i], &ds->regs->channel[ds->slave.cs].tx); + unsigned int *tx = &ds->regs->channel[ds->slave.cs].tx; + if (ds->slave.wordlen > 16) + writel(((u32 *)txp)[i], tx); + else if (ds->slave.wordlen > 8) + writel(((u16 *)txp)[i], tx); + else + writel(((u8 *)txp)[i], tx); } /* wait to finish of transfer */ @@ -268,7 +274,7 @@ int omap3_spi_write(struct spi_slave *slave, unsigned int len, const u8 *txp, return 0; } -int omap3_spi_read(struct spi_slave *slave, unsigned int len, u8 *rxp, +int omap3_spi_read(struct spi_slave *slave, unsigned int len, void *rxp, unsigned long flags) { struct omap3_spi_slave *ds = to_omap3_spi(slave); @@ -279,7 +285,8 @@ int omap3_spi_read(struct spi_slave *slave, unsigned int len, u8 *rxp, /* Enable the channel */ omap3_spi_set_enable(ds,OMAP3_MCSPI_CHCTRL_EN); - chconf &= ~OMAP3_MCSPI_CHCONF_TRM_MASK; + chconf &= ~(OMAP3_MCSPI_CHCONF_TRM_MASK | OMAP3_MCSPI_CHCONF_WL_MASK); + chconf |= (ds->slave.wordlen - 1) << 7; chconf |= OMAP3_MCSPI_CHCONF_TRM_RX_ONLY; chconf |= OMAP3_MCSPI_CHCONF_FORCE; omap3_spi_write_chconf(ds,chconf); @@ -302,7 +309,13 @@ int omap3_spi_read(struct spi_slave *slave, unsigned int len, u8 *rxp, omap3_spi_set_enable(ds,OMAP3_MCSPI_CHCTRL_DIS); /* Read the data */ - rxp[i] = readl(&ds->regs->channel[ds->slave.cs].rx); + unsigned int *rx = &ds->regs->channel[ds->slave.cs].rx; + if (ds->slave.wordlen > 16) + ((u32 *)rxp)[i] = readl(rx); + else if (ds->slave.wordlen > 8) + ((u16 *)rxp)[i] = (u16)readl(rx); + else + ((u8 *)rxp)[i] = (u8)readl(rx); } if (flags & SPI_XFER_END) { @@ -314,8 +327,8 @@ int omap3_spi_read(struct spi_slave *slave, unsigned int len, u8 *rxp, } /*McSPI Transmit Receive Mode*/ -int omap3_spi_txrx(struct spi_slave *slave, - unsigned int len, const u8 *txp, u8 *rxp, unsigned long flags) +int omap3_spi_txrx(struct spi_slave *slave, unsigned int len, + const void *txp, void *rxp, unsigned long flags) { struct omap3_spi_slave *ds = to_omap3_spi(slave); int timeout = SPI_WAIT_TIMEOUT; @@ -327,7 +340,8 @@ int omap3_spi_txrx(struct spi_slave *slave, omap3_spi_set_enable(ds,OMAP3_MCSPI_CHCTRL_EN); /*set TRANSMIT-RECEIVE Mode*/ - chconf &= ~OMAP3_MCSPI_CHCONF_TRM_MASK; + chconf &= ~(OMAP3_MCSPI_CHCONF_TRM_MASK | OMAP3_MCSPI_CHCONF_WL_MASK); + chconf |= (ds->slave.wordlen - 1) << 7; chconf |= OMAP3_MCSPI_CHCONF_FORCE; omap3_spi_write_chconf(ds,chconf); @@ -344,7 +358,13 @@ int omap3_spi_txrx(struct spi_slave *slave, } } /* Write the data */ - writel(txp[i], &ds->regs->channel[ds->slave.cs].tx); + unsigned int *tx = &ds->regs->channel[ds->slave.cs].tx; + if (ds->slave.wordlen > 16) + writel(((u32 *)txp)[i], tx); + else if (ds->slave.wordlen > 8) + writel(((u16 *)txp)[i], tx); + else + writel(((u8 *)txp)[i], tx); /*Read: wait for RX containing data (RXS == 1)*/ while (!(readl(&ds->regs->channel[ds->slave.cs].chstat) & @@ -356,7 +376,13 @@ int omap3_spi_txrx(struct spi_slave *slave, } } /* Read the data */ - rxp[i] = readl(&ds->regs->channel[ds->slave.cs].rx); + unsigned int *rx = &ds->regs->channel[ds->slave.cs].rx; + if (ds->slave.wordlen > 16) + ((u32 *)rxp)[i] = readl(rx); + else if (ds->slave.wordlen > 8) + ((u16 *)rxp)[i] = (u16)readl(rx); + else + ((u8 *)rxp)[i] = (u8)readl(rx); } /* Disable the channel */ omap3_spi_set_enable(ds,OMAP3_MCSPI_CHCTRL_DIS); @@ -375,14 +401,17 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, { struct omap3_spi_slave *ds = to_omap3_spi(slave); unsigned int len; - const u8 *txp = dout; - u8 *rxp = din; int ret = -1; - if (bitlen % 8) + if (ds->slave.wordlen < 4 || ds->slave.wordlen > 32) { + printf("omap3_spi: invalid wordlen %d\n", ds->slave.wordlen); + return -1; + } + + if (bitlen % ds->slave.wordlen) return -1; - len = bitlen / 8; + len = bitlen / ds->slave.wordlen; if (bitlen == 0) { /* only change CS */ int chconf = readl(&ds->regs->channel[ds->slave.cs].chconf); @@ -400,11 +429,11 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, ret = 0; } else { if (dout != NULL && din != NULL) - ret = omap3_spi_txrx(slave, len, txp, rxp, flags); + ret = omap3_spi_txrx(slave, len, dout, din, flags); else if (dout != NULL) - ret = omap3_spi_write(slave, len, txp, flags); + ret = omap3_spi_write(slave, len, dout, flags); else if (din != NULL) - ret = omap3_spi_read(slave, len, rxp, flags); + ret = omap3_spi_read(slave, len, din, flags); } return ret; } diff --git a/drivers/spi/omap3_spi.h b/drivers/spi/omap3_spi.h index 01537b6246..ab7cd84448 100644 --- a/drivers/spi/omap3_spi.h +++ b/drivers/spi/omap3_spi.h @@ -99,11 +99,11 @@ static inline struct omap3_spi_slave *to_omap3_spi(struct spi_slave *slave) return container_of(slave, struct omap3_spi_slave, slave); } -int omap3_spi_txrx(struct spi_slave *slave, unsigned int len, const u8 *txp, - u8 *rxp, unsigned long flags); -int omap3_spi_write(struct spi_slave *slave, unsigned int len, const u8 *txp, +int omap3_spi_txrx(struct spi_slave *slave, unsigned int len, const void *txp, + void *rxp, unsigned long flags); +int omap3_spi_write(struct spi_slave *slave, unsigned int len, const void *txp, unsigned long flags); -int omap3_spi_read(struct spi_slave *slave, unsigned int len, u8 *rxp, +int omap3_spi_read(struct spi_slave *slave, unsigned int len, void *rxp, unsigned long flags); #endif /* _OMAP3_SPI_H_ */ diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index ea39d1a1ee..b76a26cef0 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -8,6 +8,18 @@ #include <malloc.h> #include <spi.h> +int spi_set_wordlen(struct spi_slave *slave, unsigned int wordlen) +{ + if (wordlen == 0 || wordlen > 32) { + printf("spi: invalid wordlen %d\n", wordlen); + return -1; + } + + slave->wordlen = wordlen; + + return 0; +} + void *spi_do_alloc_slave(int offset, int size, unsigned int bus, unsigned int cs) { @@ -20,6 +32,7 @@ void *spi_do_alloc_slave(int offset, int size, unsigned int bus, slave = (struct spi_slave *)(ptr + offset); slave->bus = bus; slave->cs = cs; + slave->wordlen = SPI_DEFAULT_WORDLEN; } return ptr; diff --git a/drivers/tpm/Makefile b/drivers/tpm/Makefile index 4b8cbecaf9..2f2353f809 100644 --- a/drivers/tpm/Makefile +++ b/drivers/tpm/Makefile @@ -3,8 +3,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -$(shell mkdir -p $(obj)slb9635_i2c) - # TODO: Merge tpm_tis_lpc.c with tpm.c obj-$(CONFIG_TPM_ATMEL_TWI) += tpm_atmel_twi.o obj-$(CONFIG_TPM_TIS_I2C) += tpm.o diff --git a/drivers/tpm/tis_i2c.c b/drivers/tpm/tis_i2c.c deleted file mode 100644 index 22554e1456..0000000000 --- a/drivers/tpm/tis_i2c.c +++ /dev/null @@ -1,185 +0,0 @@ -/* - * Copyright (c) 2012 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - */ - -#include <config.h> -#include <common.h> -#include <fdtdec.h> -#include <i2c.h> -#include "slb9635_i2c/tpm.h" - -DECLARE_GLOBAL_DATA_PTR; - -/* TPM configuration */ -struct tpm { - int i2c_bus; - int slave_addr; - char inited; - int old_bus; -} tpm; - - -static int tpm_select(void) -{ - int ret; - - tpm.old_bus = i2c_get_bus_num(); - if (tpm.old_bus != tpm.i2c_bus) { - ret = i2c_set_bus_num(tpm.i2c_bus); - if (ret) { - debug("%s: Fail to set i2c bus %d\n", __func__, - tpm.i2c_bus); - return -1; - } - } - return 0; -} - -static int tpm_deselect(void) -{ - int ret; - - if (tpm.old_bus != i2c_get_bus_num()) { - ret = i2c_set_bus_num(tpm.old_bus); - if (ret) { - debug("%s: Fail to restore i2c bus %d\n", - __func__, tpm.old_bus); - return -1; - } - } - tpm.old_bus = -1; - return 0; -} - -/** - * Decode TPM configuration. - * - * @param dev Returns a configuration of TPM device - * @return 0 if ok, -1 on error - */ -static int tpm_decode_config(struct tpm *dev) -{ -#ifdef CONFIG_OF_CONTROL - const void *blob = gd->fdt_blob; - int node, parent; - int i2c_bus; - - node = fdtdec_next_compatible(blob, 0, COMPAT_INFINEON_SLB9635_TPM); - if (node < 0) { - node = fdtdec_next_compatible(blob, 0, - COMPAT_INFINEON_SLB9645_TPM); - } - if (node < 0) { - debug("%s: Node not found\n", __func__); - return -1; - } - parent = fdt_parent_offset(blob, node); - if (parent < 0) { - debug("%s: Cannot find node parent\n", __func__); - return -1; - } - i2c_bus = i2c_get_bus_num_fdt(parent); - if (i2c_bus < 0) - return -1; - dev->i2c_bus = i2c_bus; - dev->slave_addr = fdtdec_get_addr(blob, node, "reg"); -#else - dev->i2c_bus = CONFIG_INFINEON_TPM_I2C_BUS; - dev->slave_addr = CONFIG_INFINEON_TPM_I2C_ADDR; -#endif - return 0; -} - -int tis_init(void) -{ - if (tpm.inited) - return 0; - - if (tpm_decode_config(&tpm)) - return -1; - - if (tpm_select()) - return -1; - - /* - * Probe TPM twice; the first probing might fail because TPM is asleep, - * and the probing can wake up TPM. - */ - if (i2c_probe(tpm.slave_addr) && i2c_probe(tpm.slave_addr)) { - debug("%s: fail to probe i2c addr 0x%x\n", __func__, - tpm.slave_addr); - return -1; - } - - tpm_deselect(); - - tpm.inited = 1; - - return 0; -} - -int tis_open(void) -{ - int rc; - - if (!tpm.inited) - return -1; - - if (tpm_select()) - return -1; - - rc = tpm_open(tpm.slave_addr); - - tpm_deselect(); - - return rc; -} - -int tis_close(void) -{ - if (!tpm.inited) - return -1; - - if (tpm_select()) - return -1; - - tpm_close(); - - tpm_deselect(); - - return 0; -} - -int tis_sendrecv(const uint8_t *sendbuf, size_t sbuf_size, - uint8_t *recvbuf, size_t *rbuf_len) -{ - int len; - uint8_t buf[4096]; - - if (!tpm.inited) - return -1; - - if (sizeof(buf) < sbuf_size) - return -1; - - memcpy(buf, sendbuf, sbuf_size); - - if (tpm_select()) - return -1; - - len = tpm_transmit(buf, sbuf_size); - - tpm_deselect(); - - if (len < 10) { - *rbuf_len = 0; - return -1; - } - - memcpy(recvbuf, buf, len); - *rbuf_len = len; - - return 0; -} diff --git a/drivers/video/Makefile b/drivers/video/Makefile index fed1c9c957..a7f54698ac 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -18,6 +18,7 @@ obj-$(CONFIG_FSL_DIU_FB) += fsl_diu_fb.o videomodes.o obj-$(CONFIG_L5F31188) += l5f31188.o obj-$(CONFIG_MPC8XX_LCD) += mpc8xx_lcd.o obj-$(CONFIG_PXA_LCD) += pxa_lcd.o +obj-$(CONFIG_SCF0403_LCD) += scf0403_lcd.o obj-$(CONFIG_S6E8AX0) += s6e8ax0.o obj-$(CONFIG_S6E63D6) += s6e63d6.o obj-$(CONFIG_LD9040) += ld9040.o diff --git a/drivers/video/bcm2835.c b/drivers/video/bcm2835.c index 58a616317a..1f18231ac6 100644 --- a/drivers/video/bcm2835.c +++ b/drivers/video/bcm2835.c @@ -14,6 +14,8 @@ DECLARE_GLOBAL_DATA_PTR; /* Global variables that lcd.c expects to exist */ vidinfo_t panel_info; +static u32 bcm2835_pitch; + struct msg_query { struct bcm2835_mbox_hdr hdr; struct bcm2835_mbox_tag_physical_w_h physical_w_h; @@ -30,6 +32,7 @@ struct msg_setup { struct bcm2835_mbox_tag_virtual_offset virtual_offset; struct bcm2835_mbox_tag_overscan overscan; struct bcm2835_mbox_tag_allocate_buffer allocate_buffer; + struct bcm2835_mbox_tag_pitch pitch; u32 end_tag; }; @@ -80,6 +83,7 @@ void lcd_ctrl_init(void *lcdbase) msg_setup->overscan.body.req.right = 0; BCM2835_MBOX_INIT_TAG(&msg_setup->allocate_buffer, ALLOCATE_BUFFER); msg_setup->allocate_buffer.body.req.alignment = 0x100; + BCM2835_MBOX_INIT_TAG_NO_REQ(&msg_setup->pitch, GET_PITCH); ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN, &msg_setup->hdr); if (ret) { @@ -90,6 +94,7 @@ void lcd_ctrl_init(void *lcdbase) w = msg_setup->physical_w_h.body.resp.width; h = msg_setup->physical_w_h.body.resp.height; + bcm2835_pitch = msg_setup->pitch.body.resp.pitch; debug("bcm2835: Final resolution is %d x %d\n", w, h); @@ -103,3 +108,9 @@ void lcd_ctrl_init(void *lcdbase) void lcd_enable(void) { } + +int lcd_get_size(int *line_length) +{ + *line_length = bcm2835_pitch; + return *line_length * panel_info.vl_row; +} diff --git a/drivers/video/scf0403_lcd.c b/drivers/video/scf0403_lcd.c new file mode 100644 index 0000000000..2bc8bcae8a --- /dev/null +++ b/drivers/video/scf0403_lcd.c @@ -0,0 +1,296 @@ +/* + * scf0403.c -- support for DataImage SCF0403 LCD + * + * Copyright (c) 2013 Adapted from Linux driver: + * Copyright (c) 2012 Anders Electronics plc. All Rights Reserved. + * Copyright (c) 2012 CompuLab, Ltd + * Dmitry Lifshitz <lifshitz@compulab.co.il> + * Ilya Ledvich <ilya@compulab.co.il> + * Inspired by Alberto Panizzo <maramaopercheseimorto@gmail.com> & + * Marek Vasut work in l4f00242t03.c + * + * U-Boot port: Nikita Kiryanov <nikita@compulab.co.il> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/gpio.h> +#include <spi.h> + +struct scf0403_cmd { + u16 cmd; + u16 *params; + int count; +}; + +struct scf0403_initseq_entry { + struct scf0403_cmd cmd; + int delay_ms; +}; + +struct scf0403_priv { + struct spi_slave *spi; + unsigned int reset_gpio; + u32 rddid; + struct scf0403_initseq_entry *init_seq; + int seq_size; +}; + +struct scf0403_priv priv; + +#define SCF0403852GGU04_ID 0x000080 + +/* SCF0403526GGU20 model commands parameters */ +static u16 extcmd_params_sn20[] = {0xff, 0x98, 0x06}; +static u16 spiinttype_params_sn20[] = {0x60}; +static u16 bc_params_sn20[] = { + 0x01, 0x10, 0x61, 0x74, 0x01, 0x01, 0x1B, + 0x12, 0x71, 0x00, 0x00, 0x00, 0x01, 0x01, + 0x05, 0x00, 0xFF, 0xF2, 0x01, 0x00, 0x40, +}; +static u16 bd_params_sn20[] = {0x01, 0x23, 0x45, 0x67, 0x01, 0x23, 0x45, 0x67}; +static u16 be_params_sn20[] = { + 0x01, 0x22, 0x22, 0xBA, 0xDC, 0x26, 0x28, 0x22, 0x22, +}; +static u16 vcom_params_sn20[] = {0x74}; +static u16 vmesur_params_sn20[] = {0x7F, 0x0F, 0x00}; +static u16 powerctl_params_sn20[] = {0x03, 0x0b, 0x00}; +static u16 lvglvolt_params_sn20[] = {0x08}; +static u16 engsetting_params_sn20[] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x20}; +static u16 dispfunc_params_sn20[] = {0xa0}; +static u16 dvddvolt_params_sn20[] = {0x74}; +static u16 dispinv_params_sn20[] = {0x00, 0x00, 0x00}; +static u16 panelres_params_sn20[] = {0x82}; +static u16 framerate_params_sn20[] = {0x00, 0x13, 0x13}; +static u16 timing_params_sn20[] = {0x80, 0x05, 0x40, 0x28}; +static u16 powerctl2_params_sn20[] = {0x17, 0x75, 0x79, 0x20}; +static u16 memaccess_params_sn20[] = {0x00}; +static u16 pixfmt_params_sn20[] = {0x66}; +static u16 pgamma_params_sn20[] = { + 0x00, 0x03, 0x0b, 0x0c, 0x0e, 0x08, 0xc5, 0x04, + 0x08, 0x0c, 0x13, 0x11, 0x11, 0x14, 0x0c, 0x10, +}; +static u16 ngamma_params_sn20[] = { + 0x00, 0x0d, 0x11, 0x0c, 0x0c, 0x04, 0x76, 0x03, + 0x08, 0x0b, 0x16, 0x10, 0x0d, 0x16, 0x0a, 0x00, +}; +static u16 tearing_params_sn20[] = {0x00}; + +/* SCF0403852GGU04 model commands parameters */ +static u16 memaccess_params_sn04[] = {0x08}; +static u16 pixfmt_params_sn04[] = {0x66}; +static u16 modectl_params_sn04[] = {0x01}; +static u16 dispfunc_params_sn04[] = {0x22, 0xe2, 0xFF, 0x04}; +static u16 vcom_params_sn04[] = {0x00, 0x6A}; +static u16 pgamma_params_sn04[] = { + 0x00, 0x07, 0x0d, 0x10, 0x13, 0x19, 0x0f, 0x0c, + 0x05, 0x08, 0x06, 0x13, 0x0f, 0x30, 0x20, 0x1f, +}; +static u16 ngamma_params_sn04[] = { + 0x1F, 0x20, 0x30, 0x0F, 0x13, 0x06, 0x08, 0x05, + 0x0C, 0x0F, 0x19, 0x13, 0x10, 0x0D, 0x07, 0x00, +}; +static u16 dispinv_params_sn04[] = {0x02}; + +/* Common commands */ +static struct scf0403_cmd scf0403_cmd_slpout = {0x11, NULL, 0}; +static struct scf0403_cmd scf0403_cmd_dison = {0x29, NULL, 0}; + +/* SCF0403852GGU04 init sequence */ +static struct scf0403_initseq_entry scf0403_initseq_sn04[] = { + {{0x36, memaccess_params_sn04, ARRAY_SIZE(memaccess_params_sn04)}, 0}, + {{0x3A, pixfmt_params_sn04, ARRAY_SIZE(pixfmt_params_sn04)}, 0}, + {{0xB6, dispfunc_params_sn04, ARRAY_SIZE(dispfunc_params_sn04)}, 0}, + {{0xC5, vcom_params_sn04, ARRAY_SIZE(vcom_params_sn04)}, 0}, + {{0xE0, pgamma_params_sn04, ARRAY_SIZE(pgamma_params_sn04)}, 0}, + {{0xE1, ngamma_params_sn04, ARRAY_SIZE(ngamma_params_sn04)}, 20}, + {{0xB0, modectl_params_sn04, ARRAY_SIZE(modectl_params_sn04)}, 0}, + {{0xB4, dispinv_params_sn04, ARRAY_SIZE(dispinv_params_sn04)}, 100}, +}; + +/* SCF0403526GGU20 init sequence */ +static struct scf0403_initseq_entry scf0403_initseq_sn20[] = { + {{0xff, extcmd_params_sn20, ARRAY_SIZE(extcmd_params_sn20)}, 0}, + {{0xba, spiinttype_params_sn20, ARRAY_SIZE(spiinttype_params_sn20)}, 0}, + {{0xbc, bc_params_sn20, ARRAY_SIZE(bc_params_sn20)}, 0}, + {{0xbd, bd_params_sn20, ARRAY_SIZE(bd_params_sn20)}, 0}, + {{0xbe, be_params_sn20, ARRAY_SIZE(be_params_sn20)}, 0}, + {{0xc7, vcom_params_sn20, ARRAY_SIZE(vcom_params_sn20)}, 0}, + {{0xed, vmesur_params_sn20, ARRAY_SIZE(vmesur_params_sn20)}, 0}, + {{0xc0, powerctl_params_sn20, ARRAY_SIZE(powerctl_params_sn20)}, 0}, + {{0xfc, lvglvolt_params_sn20, ARRAY_SIZE(lvglvolt_params_sn20)}, 0}, + {{0xb6, dispfunc_params_sn20, ARRAY_SIZE(dispfunc_params_sn20)}, 0}, + {{0xdf, engsetting_params_sn20, ARRAY_SIZE(engsetting_params_sn20)}, 0}, + {{0xf3, dvddvolt_params_sn20, ARRAY_SIZE(dvddvolt_params_sn20)}, 0}, + {{0xb4, dispinv_params_sn20, ARRAY_SIZE(dispinv_params_sn20)}, 0}, + {{0xf7, panelres_params_sn20, ARRAY_SIZE(panelres_params_sn20)}, 0}, + {{0xb1, framerate_params_sn20, ARRAY_SIZE(framerate_params_sn20)}, 0}, + {{0xf2, timing_params_sn20, ARRAY_SIZE(timing_params_sn20)}, 0}, + {{0xc1, powerctl2_params_sn20, ARRAY_SIZE(powerctl2_params_sn20)}, 0}, + {{0x36, memaccess_params_sn20, ARRAY_SIZE(memaccess_params_sn20)}, 0}, + {{0x3a, pixfmt_params_sn20, ARRAY_SIZE(pixfmt_params_sn20)}, 0}, + {{0xe0, pgamma_params_sn20, ARRAY_SIZE(pgamma_params_sn20)}, 0}, + {{0xe1, ngamma_params_sn20, ARRAY_SIZE(ngamma_params_sn20)}, 0}, + {{0x35, tearing_params_sn20, ARRAY_SIZE(tearing_params_sn20)}, 0}, +}; + +static void scf0403_gpio_reset(unsigned int gpio) +{ + if (!gpio_is_valid(gpio)) + return; + + gpio_set_value(gpio, 1); + mdelay(100); + gpio_set_value(gpio, 0); + mdelay(40); + gpio_set_value(gpio, 1); + mdelay(100); +} + +static int scf0403_spi_read_rddid(struct spi_slave *spi, u32 *rddid) +{ + int error = 0; + u8 ids_buf = 0x00; + u16 dummy_buf = 0x00; + u16 cmd = 0x04; + + error = spi_set_wordlen(spi, 9); + if (error) + return error; + + /* Here 9 bits required to transmit a command */ + error = spi_xfer(spi, 9, &cmd, NULL, SPI_XFER_ONCE); + if (error) + return error; + + /* + * Here 8 + 1 bits required to arrange extra clock cycle + * before the first data bit. + * According to the datasheet - first parameter is the dummy data. + */ + error = spi_xfer(spi, 9, NULL, &dummy_buf, SPI_XFER_ONCE); + if (error) + return error; + + error = spi_set_wordlen(spi, 8); + if (error) + return error; + + /* Read rest of the data */ + error = spi_xfer(spi, 8, NULL, &ids_buf, SPI_XFER_ONCE); + if (error) + return error; + + *rddid = ids_buf; + + return 0; +} + +static int scf0403_spi_transfer(struct spi_slave *spi, struct scf0403_cmd *cmd) +{ + int i, error; + u32 command = cmd->cmd; + u32 msg; + + error = spi_set_wordlen(spi, 9); + if (error) + return error; + + error = spi_xfer(spi, 9, &command, NULL, SPI_XFER_ONCE); + if (error) + return error; + + for (i = 0; i < cmd->count; i++) { + msg = (cmd->params[i] | 0x100); + error = spi_xfer(spi, 9, &msg, NULL, SPI_XFER_ONCE); + if (error) + return error; + } + + return 0; +} + +static void scf0403_lcd_init(struct scf0403_priv *priv) +{ + int i; + + /* reset LCD */ + scf0403_gpio_reset(priv->reset_gpio); + + for (i = 0; i < priv->seq_size; i++) { + if (scf0403_spi_transfer(priv->spi, &priv->init_seq[i].cmd) < 0) + puts("SPI transfer failed\n"); + + mdelay(priv->init_seq[i].delay_ms); + } +} + +static int scf0403_request_reset_gpio(unsigned gpio) +{ + int err = gpio_request(gpio, "lcd reset"); + + if (err) + return err; + + err = gpio_direction_output(gpio, 0); + if (err) + gpio_free(gpio); + + return err; +} + +int scf0403_init(int reset_gpio) +{ + int error; + + if (gpio_is_valid(reset_gpio)) { + error = scf0403_request_reset_gpio(reset_gpio); + if (error) { + printf("Failed requesting reset GPIO%d: %d\n", + reset_gpio, error); + return error; + } + } + + priv.reset_gpio = reset_gpio; + priv.spi = spi_setup_slave(3, 0, 1000000, SPI_MODE_0); + error = spi_claim_bus(priv.spi); + if (error) + goto bus_claim_fail; + + /* reset LCD */ + scf0403_gpio_reset(reset_gpio); + + error = scf0403_spi_read_rddid(priv.spi, &priv.rddid); + if (error) { + puts("IDs read failed\n"); + goto readid_fail; + } + + if (priv.rddid == SCF0403852GGU04_ID) { + priv.init_seq = scf0403_initseq_sn04; + priv.seq_size = ARRAY_SIZE(scf0403_initseq_sn04); + } else { + priv.init_seq = scf0403_initseq_sn20; + priv.seq_size = ARRAY_SIZE(scf0403_initseq_sn20); + } + + scf0403_lcd_init(&priv); + + /* Start operation */ + scf0403_spi_transfer(priv.spi, &scf0403_cmd_dison); + mdelay(100); + scf0403_spi_transfer(priv.spi, &scf0403_cmd_slpout); + spi_release_bus(priv.spi); + + return 0; + +readid_fail: + spi_release_bus(priv.spi); +bus_claim_fail: + if (gpio_is_valid(priv.reset_gpio)) + gpio_free(priv.reset_gpio); + + return error; +} diff --git a/examples/api/Makefile b/examples/api/Makefile index 33cc91ba71..cad10a3ecb 100644 --- a/examples/api/Makefile +++ b/examples/api/Makefile @@ -14,25 +14,22 @@ endif include $(TOPDIR)/config.mk # Resulting ELF and binary exectuables will be named demo and demo.bin -OUTPUT-$(CONFIG_API) = $(obj)demo -OUTPUT = $(OUTPUT-y) +OUTPUT = $(obj)demo # Source files located in the examples/api directory -SOBJ_FILES-$(CONFIG_API) += crt0.o -COBJ_FILES-$(CONFIG_API) += demo.o -COBJ_FILES-$(CONFIG_API) += glue.o -COBJ_FILES-$(CONFIG_API) += libgenwrap.o +SOBJ_FILES-y += crt0.o +COBJ_FILES-y += demo.o +COBJ_FILES-y += glue.o +COBJ_FILES-y += libgenwrap.o # Source files which exist outside the examples/api directory -EXT_COBJ_FILES-$(CONFIG_API) += lib/crc32.o -EXT_COBJ_FILES-$(CONFIG_API) += lib/ctype.o -EXT_COBJ_FILES-$(CONFIG_API) += lib/div64.o -EXT_COBJ_FILES-$(CONFIG_API) += lib/string.o -EXT_COBJ_FILES-$(CONFIG_API) += lib/time.o -EXT_COBJ_FILES-$(CONFIG_API) += lib/vsprintf.o -ifeq ($(ARCH),powerpc) -EXT_SOBJ_FILES-$(CONFIG_API) += arch/powerpc/lib/ppcstring.o -endif +EXT_COBJ_FILES-y += lib/crc32.o +EXT_COBJ_FILES-y += lib/ctype.o +EXT_COBJ_FILES-y += lib/div64.o +EXT_COBJ_FILES-y += lib/string.o +EXT_COBJ_FILES-y += lib/time.o +EXT_COBJ_FILES-y += lib/vsprintf.o +EXT_SOBJ_FILES-$(CONFIG_PPC) += arch/powerpc/lib/ppcstring.o # Create a list of source files so their dependencies can be auto-generated SRCS += $(addprefix $(SRCTREE)/,$(EXT_COBJ_FILES-y:.o=.c)) @@ -46,8 +43,6 @@ OBJS += $(addprefix $(obj),$(COBJ_FILES-y)) OBJS += $(addprefix $(obj),$(notdir $(EXT_COBJ_FILES-y))) OBJS += $(addprefix $(obj),$(notdir $(EXT_SOBJ_FILES-y))) -CPPFLAGS += -I.. - all: $(obj).depend $(OUTPUT) ######################################################################### diff --git a/examples/standalone/Makefile b/examples/standalone/Makefile index 4afedea065..f4f102b3e1 100644 --- a/examples/standalone/Makefile +++ b/examples/standalone/Makefile @@ -8,7 +8,6 @@ include $(TOPDIR)/config.mk ELF-$(ARCH) := -ELF-$(BOARD) := ELF-$(CPU) := ELF-y := hello_world @@ -20,14 +19,13 @@ ELF-mpc5xxx += interrupt ELF-mpc8xx += test_burst timer ELF-mpc8260 += mem_to_mem_idma2intr ELF-ppc += sched -ELF-oxc += eepro100_eeprom # # Some versions of make do not handle trailing white spaces properly; # leading to build failures. The problem was found with GNU Make 3.80. # Using 'strip' as a workaround for the problem. # -ELF := $(strip $(ELF-y) $(ELF-$(ARCH)) $(ELF-$(BOARD)) $(ELF-$(CPU))) +ELF := $(strip $(ELF-y) $(ELF-$(ARCH)) $(ELF-$(CPU))) SREC := $(addsuffix .srec,$(ELF)) BIN := $(addsuffix .bin,$(ELF)) @@ -54,8 +52,6 @@ SREC := $(addprefix $(obj),$(SREC)) gcclibdir := $(shell dirname `$(CC) -print-libgcc-file-name`) -CPPFLAGS += -I.. - # For PowerPC there's no need to compile standalone applications as a # relocatable executable. The relocation data is not needed, and # also causes the entry point of the standalone application to be diff --git a/examples/standalone/eepro100_eeprom.c b/examples/standalone/eepro100_eeprom.c deleted file mode 100644 index 3c7f380977..0000000000 --- a/examples/standalone/eepro100_eeprom.c +++ /dev/null @@ -1,214 +0,0 @@ -/* - * Copyright 1998-2001 by Donald Becker. - * This software may be used and distributed according to the terms of - * the GNU General Public License (GPL), incorporated herein by reference. - * Contact the author for use under other terms. - * - * This program must be compiled with "-O"! - * See the bottom of this file for the suggested compile-command. - * - * The author may be reached as becker@scyld.com, or C/O - * Scyld Computing Corporation - * 410 Severn Ave., Suite 210 - * Annapolis MD 21403 - * - * Common-sense licensing statement: Using any portion of this program in - * your own program means that you must give credit to the original author - * and release the resulting code under the GPL. - */ - -/* avoid unnecessary memcpy function */ -#define _PPC_STRING_H_ - -#include <common.h> -#include <exports.h> - -static int reset_eeprom(unsigned long ioaddr, unsigned char *hwaddr); - -int eepro100_eeprom(int argc, char * const argv[]) -{ - int ret = 0; - - unsigned char hwaddr1[6] = { 0x00, 0x00, 0x02, 0x03, 0x04, 0x05 }; - unsigned char hwaddr2[6] = { 0x00, 0x00, 0x02, 0x03, 0x04, 0x06 }; - - app_startup(argv); - -#if defined(CONFIG_OXC) - ret |= reset_eeprom(0x80000000, hwaddr1); - ret |= reset_eeprom(0x81000000, hwaddr2); -#endif - - return ret; -} - -/* Default EEPROM for i82559 */ -static unsigned short default_eeprom[64] = { - 0x0100, 0x0302, 0x0504, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, - 0xffff, 0xffff, 0x40c0, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, - 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, - 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, - 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, - 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, - 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, - 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff -}; - -static unsigned short eeprom[256]; - -static int eeprom_size = 64; -static int eeprom_addr_size = 6; - -static int debug = 0; - -static inline unsigned short swap16(unsigned short x) -{ - return (((x & 0xff) << 8) | ((x & 0xff00) >> 8)); -} - -static inline void outw(short data, long addr) -{ - *(volatile short *)(addr) = swap16(data); -} - -static inline short inw(long addr) -{ - return swap16(*(volatile short *)(addr)); -} - -void *memcpy(void *dst, const void *src, unsigned int len) -{ - char *ret = dst; - while (len-- > 0) { - *ret++ = *((char *)src); - src++; - } - return (void *)ret; -} - -/* The EEPROM commands include the alway-set leading bit. */ -#define EE_WRITE_CMD (5) -#define EE_READ_CMD (6) -#define EE_ERASE_CMD (7) - -/* Serial EEPROM section. */ -#define EE_SHIFT_CLK 0x01 /* EEPROM shift clock. */ -#define EE_CS 0x02 /* EEPROM chip select. */ -#define EE_DATA_WRITE 0x04 /* EEPROM chip data in. */ -#define EE_DATA_READ 0x08 /* EEPROM chip data out. */ -#define EE_ENB (0x4800 | EE_CS) -#define EE_WRITE_0 0x4802 -#define EE_WRITE_1 0x4806 -#define EE_OFFSET 14 - -/* Delay between EEPROM clock transitions. */ -#define eeprom_delay(ee_addr) inw(ee_addr) - -/* Wait for the EEPROM to finish the previous operation. */ -static int eeprom_busy_poll(long ee_ioaddr) -{ - int i; - outw(EE_ENB, ee_ioaddr); - for (i = 0; i < 10000; i++) /* Typical 2000 ticks */ - if (inw(ee_ioaddr) & EE_DATA_READ) - break; - return i; -} - -/* This executes a generic EEPROM command, typically a write or write enable. - It returns the data output from the EEPROM, and thus may also be used for - reads. */ -static int do_eeprom_cmd(long ioaddr, int cmd, int cmd_len) -{ - unsigned retval = 0; - long ee_addr = ioaddr + EE_OFFSET; - - if (debug > 1) - printf(" EEPROM op 0x%x: ", cmd); - - outw(EE_ENB | EE_SHIFT_CLK, ee_addr); - - /* Shift the command bits out. */ - do { - short dataval = (cmd & (1 << cmd_len)) ? EE_WRITE_1 : EE_WRITE_0; - outw(dataval, ee_addr); - eeprom_delay(ee_addr); - if (debug > 2) - printf("%X", inw(ee_addr) & 15); - outw(dataval | EE_SHIFT_CLK, ee_addr); - eeprom_delay(ee_addr); - retval = (retval << 1) | ((inw(ee_addr) & EE_DATA_READ) ? 1 : 0); - } while (--cmd_len >= 0); -#if 0 - outw(EE_ENB, ee_addr); -#endif - /* Terminate the EEPROM access. */ - outw(EE_ENB & ~EE_CS, ee_addr); - if (debug > 1) - printf(" EEPROM result is 0x%5.5x.\n", retval); - return retval; -} - -static int read_eeprom(long ioaddr, int location, int addr_len) -{ - return do_eeprom_cmd(ioaddr, ((EE_READ_CMD << addr_len) | location) - << 16 , 3 + addr_len + 16) & 0xffff; -} - -static void write_eeprom(long ioaddr, int index, int value, int addr_len) -{ - long ee_ioaddr = ioaddr + EE_OFFSET; - int i; - - /* Poll for previous op finished. */ - eeprom_busy_poll(ee_ioaddr); /* Typical 0 ticks */ - /* Enable programming modes. */ - do_eeprom_cmd(ioaddr, (0x4f << (addr_len-4)), 3 + addr_len); - /* Do the actual write. */ - do_eeprom_cmd(ioaddr, - (((EE_WRITE_CMD<<addr_len) | index)<<16) | (value & 0xffff), - 3 + addr_len + 16); - /* Poll for write finished. */ - i = eeprom_busy_poll(ee_ioaddr); /* Typical 2000 ticks */ - if (debug) - printf(" Write finished after %d ticks.\n", i); - /* Disable programming. This command is not instantaneous, so we check - for busy before the next op. */ - do_eeprom_cmd(ioaddr, (0x40 << (addr_len-4)), 3 + addr_len); - eeprom_busy_poll(ee_ioaddr); -} - -static int reset_eeprom(unsigned long ioaddr, unsigned char *hwaddr) -{ - unsigned short checksum = 0; - int size_test; - int i; - - printf("Resetting i82559 EEPROM @ 0x%08lX ... ", ioaddr); - - size_test = do_eeprom_cmd(ioaddr, (EE_READ_CMD << 8) << 16, 27); - eeprom_addr_size = (size_test & 0xffe0000) == 0xffe0000 ? 8 : 6; - eeprom_size = 1 << eeprom_addr_size; - - memcpy(eeprom, default_eeprom, sizeof default_eeprom); - - for (i = 0; i < 3; i++) - eeprom[i] = (hwaddr[i*2+1]<<8) + hwaddr[i*2]; - - /* Recalculate the checksum. */ - for (i = 0; i < eeprom_size - 1; i++) - checksum += eeprom[i]; - eeprom[i] = 0xBABA - checksum; - - for (i = 0; i < eeprom_size; i++) - write_eeprom(ioaddr, i, eeprom[i], eeprom_addr_size); - - for (i = 0; i < eeprom_size; i++) - if (read_eeprom(ioaddr, i, eeprom_addr_size) != eeprom[i]) { - printf("failed\n"); - return 1; - } - - printf("done\n"); - return 0; -} diff --git a/fs/Makefile b/fs/Makefile index bdcd74631d..34dc0351ed 100644 --- a/fs/Makefile +++ b/fs/Makefile @@ -6,15 +6,20 @@ # SPDX-License-Identifier: GPL-2.0+ # +ifdef CONFIG_SPL_BUILD +obj-$(CONFIG_SPL_FAT_SUPPORT) += fat/ +else obj-y += fs.o -obj-y += cbfs/ -obj-y += cramfs/ -obj-y += ext4/ -obj-y += fdos/ -obj-y += jffs2/ -obj-y += reiserfs/ -obj-y += sandbox/ -obj-y += ubifs/ -obj-y += yaffs2/ -obj-y += zfs/ +obj-$(CONFIG_CMD_CBFS) += cbfs/ +obj-$(CONFIG_CMD_CRAMFS) += cramfs/ +obj-$(CONFIG_FS_EXT4) += ext4/ +obj-y += fat/ +obj-$(CONFIG_CMD_FDOS) += fdos/ +obj-$(CONFIG_CMD_JFFS2) += jffs2/ +obj-$(CONFIG_CMD_REISER) += reiserfs/ +obj-$(CONFIG_SANDBOX) += sandbox/ +obj-$(CONFIG_CMD_UBIFS) += ubifs/ +obj-$(CONFIG_YAFFS2) += yaffs2/ +obj-$(CONFIG_CMD_ZFS) += zfs/ +endif diff --git a/fs/cbfs/Makefile b/fs/cbfs/Makefile index 6f33d2813d..a106e05dd8 100644 --- a/fs/cbfs/Makefile +++ b/fs/cbfs/Makefile @@ -3,4 +3,4 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-$(CONFIG_CMD_CBFS) := cbfs.o +obj-y := cbfs.o diff --git a/fs/cramfs/Makefile b/fs/cramfs/Makefile index e2b2c7366c..12d73a375e 100644 --- a/fs/cramfs/Makefile +++ b/fs/cramfs/Makefile @@ -5,5 +5,5 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-$(CONFIG_CMD_CRAMFS) := cramfs.o -obj-$(CONFIG_CMD_CRAMFS) += uncompress.o +obj-y := cramfs.o +obj-y += uncompress.o diff --git a/fs/ext4/Makefile b/fs/ext4/Makefile index 0f5d3995cb..8d15bdad67 100644 --- a/fs/ext4/Makefile +++ b/fs/ext4/Makefile @@ -9,5 +9,5 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-$(CONFIG_FS_EXT4) := ext4fs.o ext4_common.o dev.o +obj-y := ext4fs.o ext4_common.o dev.o obj-$(CONFIG_EXT4_WRITE) += ext4_write.o ext4_journal.o crc16.o diff --git a/fs/fdos/Makefile b/fs/fdos/Makefile index 95480af3e4..2f8b5addd6 100644 --- a/fs/fdos/Makefile +++ b/fs/fdos/Makefile @@ -10,4 +10,4 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-$(CONFIG_CMD_FDOS) := fat.o vfat.o dev.o fdos.o fs.o subdir.o +obj-y := fat.o vfat.o dev.o fdos.o fs.o subdir.o diff --git a/fs/jffs2/Makefile b/fs/jffs2/Makefile index 02e481f3ce..4cb0600cf9 100644 --- a/fs/jffs2/Makefile +++ b/fs/jffs2/Makefile @@ -5,11 +5,9 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifdef CONFIG_CMD_JFFS2 obj-$(CONFIG_JFFS2_LZO) += compr_lzo.o obj-y += compr_rtime.o obj-y += compr_rubin.o obj-y += compr_zlib.o obj-y += jffs2_1pass.o obj-y += mini_inflate.o -endif diff --git a/fs/reiserfs/Makefile b/fs/reiserfs/Makefile index 55f70b1a94..5a692f0ee7 100644 --- a/fs/reiserfs/Makefile +++ b/fs/reiserfs/Makefile @@ -9,4 +9,4 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-$(CONFIG_CMD_REISER) := reiserfs.o dev.o mode_string.o +obj-y := reiserfs.o dev.o mode_string.o diff --git a/fs/sandbox/Makefile b/fs/sandbox/Makefile index faa7c16ba0..ca238f6d7d 100644 --- a/fs/sandbox/Makefile +++ b/fs/sandbox/Makefile @@ -10,4 +10,4 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-$(CONFIG_SANDBOX) := sandboxfs.o +obj-y := sandboxfs.o diff --git a/fs/ubifs/Makefile b/fs/ubifs/Makefile index 47d5a8fb0a..389b0e37e7 100644 --- a/fs/ubifs/Makefile +++ b/fs/ubifs/Makefile @@ -9,10 +9,10 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-$(CONFIG_CMD_UBIFS) := ubifs.o io.o super.o sb.o master.o lpt.o -obj-$(CONFIG_CMD_UBIFS) += lpt_commit.o scan.o lprops.o -obj-$(CONFIG_CMD_UBIFS) += tnc.o tnc_misc.o debug.o crc16.o budget.o -obj-$(CONFIG_CMD_UBIFS) += log.o orphan.o recovery.o replay.o +obj-y := ubifs.o io.o super.o sb.o master.o lpt.o +obj-y += lpt_commit.o scan.o lprops.o +obj-y += tnc.o tnc_misc.o debug.o crc16.o budget.o +obj-y += log.o orphan.o recovery.o replay.o # SEE README.arm-unaligned-accesses $(obj)super.o: CFLAGS += $(PLATFORM_NO_UNALIGNED) diff --git a/fs/yaffs2/Makefile b/fs/yaffs2/Makefile index 077af7834e..d811287ddb 100644 --- a/fs/yaffs2/Makefile +++ b/fs/yaffs2/Makefile @@ -16,7 +16,7 @@ # # $Id: Makefile,v 1.15 2007/07/18 19:40:38 charles Exp $ -obj-$(CONFIG_YAFFS2) := \ +obj-y := \ yaffs_allocator.o yaffs_attribs.o yaffs_bitmap.o yaffs_uboot_glue.o\ yaffs_checkptrw.o yaffs_ecc.o yaffs_error.o \ yaffsfs.o yaffs_guts.o yaffs_nameval.o yaffs_nand.o\ diff --git a/fs/zfs/Makefile b/fs/zfs/Makefile index 7090416b87..fa58b7fcde 100644 --- a/fs/zfs/Makefile +++ b/fs/zfs/Makefile @@ -5,4 +5,4 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-$(CONFIG_CMD_ZFS) := dev.o zfs.o zfs_fletcher.o zfs_sha256.o zfs_lzjb.o +obj-y := dev.o zfs.o zfs_fletcher.o zfs_sha256.o zfs_lzjb.o diff --git a/include/common.h b/include/common.h index 409515f498..8ca67f64fa 100644 --- a/include/common.h +++ b/include/common.h @@ -923,7 +923,7 @@ static inline void unmap_sysmem(const void *vaddr) { } -static inline phys_addr_t map_to_sysmem(void *ptr) +static inline phys_addr_t map_to_sysmem(const void *ptr) { return (phys_addr_t)(uintptr_t)ptr; } diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/common_timing_params.h b/include/common_timing_params.h index 76338d4e6c..76338d4e6c 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/common_timing_params.h +++ b/include/common_timing_params.h diff --git a/include/configs/ASH405.h b/include/configs/ASH405.h index 9460be3b59..2f5340723d 100644 --- a/include/configs/ASH405.h +++ b/include/configs/ASH405.h @@ -143,6 +143,8 @@ #define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ #define CONFIG_SYS_NAND_QUIET 1 +#define CONFIG_SYS_NAND_MAX_OOBFREE 2 +#define CONFIG_SYS_NAND_MAX_ECCPOS 56 /*----------------------------------------------------------------------- * PCI stuff diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h index 268f66ec0e..b2a5c19e0e 100644 --- a/include/configs/B4860QDS.h +++ b/include/configs/B4860QDS.h @@ -193,7 +193,7 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_DDR_SPD #define CONFIG_SYS_DDR_RAW_TIMING -#define CONFIG_FSL_DDR3 +#define CONFIG_SYS_FSL_DDR3 #define CONFIG_FSL_DDR_INTERACTIVE #define CONFIG_SYS_SPD_BUS_NUM 0 diff --git a/include/configs/BSC9131RDB.h b/include/configs/BSC9131RDB.h index 036f264c97..499d8c2054 100644 --- a/include/configs/BSC9131RDB.h +++ b/include/configs/BSC9131RDB.h @@ -80,7 +80,7 @@ #define CONFIG_SYS_MEMTEST_END 0x01ffffff /* DDR Setup */ -#define CONFIG_FSL_DDR3 +#define CONFIG_SYS_FSL_DDR3 #undef CONFIG_SYS_DDR_RAW_TIMING #undef CONFIG_DDR_SPD #define CONFIG_SYS_SPD_BUS_NUM 0 diff --git a/include/configs/BSC9132QDS.h b/include/configs/BSC9132QDS.h index 75889b3574..a6601fee86 100644 --- a/include/configs/BSC9132QDS.h +++ b/include/configs/BSC9132QDS.h @@ -134,7 +134,7 @@ #define CONFIG_SYS_MEMTEST_END 0x01ffffff /* DDR Setup */ -#define CONFIG_FSL_DDR3 +#define CONFIG_SYS_FSL_DDR3 #define CONFIG_SYS_SPD_BUS_NUM 0 #define SPD_EEPROM_ADDRESS1 0x54 /* I2C access */ #define SPD_EEPROM_ADDRESS2 0x56 /* I2C access */ diff --git a/include/configs/C29XPCIE.h b/include/configs/C29XPCIE.h index 08156c531d..1cfb2c2279 100644 --- a/include/configs/C29XPCIE.h +++ b/include/configs/C29XPCIE.h @@ -103,7 +103,7 @@ #define CONFIG_PANIC_HANG /* DDR Setup */ -#define CONFIG_FSL_DDR3 +#define CONFIG_SYS_FSL_DDR3 #define CONFIG_DDR_SPD #define CONFIG_SYS_SPD_BUS_NUM 0 #define SPD_EEPROM_ADDRESS 0x50 @@ -191,13 +191,14 @@ | CSPR_MSEL_NAND \ | CSPR_V) #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) +#define CONFIG_SYS_NAND_OOBSIZE 0x00000280 /* 640b */ #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ - | CSOR_NAND_RAL_2 /* RAL = 2 Bytes */ \ - | CSOR_NAND_PGS_2K /* Page Size = 2k */ \ - | CSOR_NAND_SPRZ_64 /* Spare size = 64 */ \ - | CSOR_NAND_PB(64)) /* 64 Pages Per Block */ + | CSOR_NAND_RAL_3 /* RAL = 3 Bytes */ \ + | CSOR_NAND_PGS_8K /* Page Size = 8K */ \ + | CSOR_NAND_SPRZ_CSOR_EXT /*oob in csor_ext*/\ + | CSOR_NAND_PB(128)) /*128 Pages Per Block*/ #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x01) | \ FTIM0_NAND_TWP(0x0c) | \ FTIM0_NAND_TWCHT(0x08) | \ @@ -224,6 +225,7 @@ #define CONFIG_SYS_CSPR1 CONFIG_SYS_NAND_CSPR #define CONFIG_SYS_AMASK1 CONFIG_SYS_NAND_AMASK #define CONFIG_SYS_CSOR1 CONFIG_SYS_NAND_CSOR +#define CONFIG_SYS_CSOR1_EXT CONFIG_SYS_NAND_OOBSIZE #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NAND_FTIM0 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2 diff --git a/include/configs/HWW1U1A.h b/include/configs/HWW1U1A.h index f3f2136668..bbfee7d308 100644 --- a/include/configs/HWW1U1A.h +++ b/include/configs/HWW1U1A.h @@ -255,7 +255,7 @@ /* -------------------------------------------------------------------- */ /* FreeScale DDR2/3 SDRAM Controller */ -#define CONFIG_FSL_DDR2 /* Our SDRAM slot is DDR2 */ +#define CONFIG_SYS_FSL_DDR2 /* Our SDRAM slot is DDR2 */ #define CONFIG_DDR_ECC /* Enable ECC by default */ #define CONFIG_DDR_SPD /* Detect DDR config from SPD EEPROM */ #define CONFIG_SPD_EEPROM /* ...why 2 config variables for this? */ diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index 3f742a2bba..a80a6966bf 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h @@ -62,11 +62,11 @@ #define CONFIG_SPD_EEPROM /* use SPD EEPROM for DDR setup*/ /* - * define CONFIG_FSL_DDR2 to use unified DDR driver + * define CONFIG_SYS_FSL_DDR2 to use unified DDR driver * undefine it to use old spd_sdram.c */ -#define CONFIG_FSL_DDR2 -#ifdef CONFIG_FSL_DDR2 +#define CONFIG_SYS_FSL_DDR2 +#ifdef CONFIG_SYS_FSL_DDR2 #define CONFIG_SYS_SPD_BUS_NUM 0 #define SPD_EEPROM_ADDRESS1 0x52 #define SPD_EEPROM_ADDRESS2 0x51 diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h index 8197f89e4e..9ab1bc106b 100644 --- a/include/configs/MPC8536DS.h +++ b/include/configs/MPC8536DS.h @@ -122,7 +122,7 @@ /* DDR Setup */ #define CONFIG_VERY_BIG_RAM -#define CONFIG_FSL_DDR2 +#define CONFIG_SYS_FSL_DDR2 #undef CONFIG_FSL_DDR_INTERACTIVE #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ #define CONFIG_DDR_SPD diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h index 66893688e6..046b14bdda 100644 --- a/include/configs/MPC8540ADS.h +++ b/include/configs/MPC8540ADS.h @@ -78,7 +78,7 @@ #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR /* DDR Setup */ -#define CONFIG_FSL_DDR1 +#define CONFIG_SYS_FSL_DDR1 #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/ #define CONFIG_DDR_SPD #undef CONFIG_FSL_DDR_INTERACTIVE diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h index e24c597453..eca3b537b4 100644 --- a/include/configs/MPC8541CDS.h +++ b/include/configs/MPC8541CDS.h @@ -51,7 +51,7 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR /* DDR Setup */ -#define CONFIG_FSL_DDR1 +#define CONFIG_SYS_FSL_DDR1 #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/ #define CONFIG_DDR_SPD #undef CONFIG_FSL_DDR_INTERACTIVE diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index 2e76df681b..8132ec055b 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h @@ -63,7 +63,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR /* DDR Setup */ -#define CONFIG_FSL_DDR2 +#define CONFIG_SYS_FSL_DDR2 #undef CONFIG_FSL_DDR_INTERACTIVE #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ #define CONFIG_DDR_SPD diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index 9ff048af6d..6acd54db85 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -75,7 +75,7 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR /* DDR Setup */ -#define CONFIG_FSL_DDR2 +#define CONFIG_SYS_FSL_DDR2 #undef CONFIG_FSL_DDR_INTERACTIVE #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/ #define CONFIG_DDR_SPD diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h index 7f0f927ea1..5ffdd01629 100644 --- a/include/configs/MPC8555CDS.h +++ b/include/configs/MPC8555CDS.h @@ -51,7 +51,7 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR /* DDR Setup */ -#define CONFIG_FSL_DDR1 +#define CONFIG_SYS_FSL_DDR1 #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/ #define CONFIG_DDR_SPD #undef CONFIG_FSL_DDR_INTERACTIVE diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h index b7c4a60309..bb9ae2dcb5 100644 --- a/include/configs/MPC8560ADS.h +++ b/include/configs/MPC8560ADS.h @@ -75,7 +75,7 @@ #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR /* DDR Setup */ -#define CONFIG_FSL_DDR1 +#define CONFIG_SYS_FSL_DDR1 #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/ #define CONFIG_DDR_SPD #undef CONFIG_FSL_DDR_INTERACTIVE diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h index c9a15395c3..7406ac3be8 100644 --- a/include/configs/MPC8568MDS.h +++ b/include/configs/MPC8568MDS.h @@ -60,7 +60,7 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR /* DDR Setup */ -#define CONFIG_FSL_DDR2 +#define CONFIG_SYS_FSL_DDR2 #undef CONFIG_FSL_DDR_INTERACTIVE #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/ #define CONFIG_DDR_SPD diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h index 341f6a89b4..df5572b3a8 100644 --- a/include/configs/MPC8569MDS.h +++ b/include/configs/MPC8569MDS.h @@ -98,7 +98,7 @@ extern unsigned long get_clock_freq(void); #endif /* DDR Setup */ -#define CONFIG_FSL_DDR3 +#define CONFIG_SYS_FSL_DDR3 #undef CONFIG_FSL_DDR_INTERACTIVE #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/ #define CONFIG_DDR_SPD diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h index c7511449ea..63480ecb0d 100644 --- a/include/configs/MPC8572DS.h +++ b/include/configs/MPC8572DS.h @@ -106,7 +106,7 @@ /* DDR Setup */ #define CONFIG_VERY_BIG_RAM -#define CONFIG_FSL_DDR2 +#define CONFIG_SYS_FSL_DDR2 #undef CONFIG_FSL_DDR_INTERACTIVE #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ #define CONFIG_DDR_SPD @@ -322,6 +322,8 @@ #define CONFIG_CMD_NAND 1 #define CONFIG_NAND_FSL_ELBC 1 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) +#define CONFIG_SYS_NAND_MAX_OOBFREE 5 +#define CONFIG_SYS_NAND_MAX_ECCPOS 56 /* NAND boot: 4K NAND loader config */ #define CONFIG_SYS_NAND_SPL_SIZE 0x1000 diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h index 97f5c877e1..41ebe31dd4 100644 --- a/include/configs/MPC8610HPCD.h +++ b/include/configs/MPC8610HPCD.h @@ -92,7 +92,7 @@ #define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR_PHYS_LOW /* DDR Setup */ -#define CONFIG_FSL_DDR2 +#define CONFIG_SYS_FSL_DDR2 #undef CONFIG_FSL_DDR_INTERACTIVE #define CONFIG_SPD_EEPROM /* Use SPD for DDR */ #define CONFIG_DDR_SPD diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index 8ed5050766..0e666bac01 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -108,7 +108,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); /* * DDR Setup */ -#define CONFIG_FSL_DDR2 +#define CONFIG_SYS_FSL_DDR2 #undef CONFIG_FSL_DDR_INTERACTIVE #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ #define CONFIG_DDR_SPD diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h index c1cfbd40b6..eab386add4 100644 --- a/include/configs/P1010RDB.h +++ b/include/configs/P1010RDB.h @@ -178,7 +178,7 @@ #define CONFIG_PANIC_HANG /* do not reset board on panic */ /* DDR Setup */ -#define CONFIG_FSL_DDR3 +#define CONFIG_SYS_FSL_DDR3 #define CONFIG_SYS_DDR_RAW_TIMING #define CONFIG_DDR_SPD #define CONFIG_SYS_SPD_BUS_NUM 1 @@ -313,6 +313,13 @@ extern unsigned long get_sdram_size(void); #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE #endif +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITION +#define CONFIG_CMD_MTDPARTS +#define MTDIDS_DEFAULT "nand0=ff800000.flash" +#define MTDPARTS_DEFAULT \ + "mtdparts=ff800000.flash:2m(uboot-env),1m(dtb),5m(kernel),56m(fs),-(usr)" + #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ | CSPR_PORT_SIZE_8 \ | CSPR_MSEL_NAND \ diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h index 1470526d0b..262c3e5f1f 100644 --- a/include/configs/P1022DS.h +++ b/include/configs/P1022DS.h @@ -177,7 +177,7 @@ /* DDR Setup */ #define CONFIG_DDR_SPD #define CONFIG_VERY_BIG_RAM -#define CONFIG_FSL_DDR3 +#define CONFIG_SYS_FSL_DDR3 #ifdef CONFIG_DDR_ECC #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER diff --git a/include/configs/P1023RDB.h b/include/configs/P1023RDB.h index e49523e940..7de6814a03 100644 --- a/include/configs/P1023RDB.h +++ b/include/configs/P1023RDB.h @@ -74,7 +74,7 @@ extern unsigned long get_clock_freq(void); #define CONFIG_CHIP_SELECTS_PER_CTRL 1 #define CONFIG_DDR_SPD -#define CONFIG_FSL_DDR3 +#define CONFIG_SYS_FSL_DDR3 #define CONFIG_FSL_DDR_INTERACTIVE #define CONFIG_SYS_SDRAM_SIZE 512u /* DDR is 512M */ #define CONFIG_SYS_SPD_BUS_NUM 0 diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h index 282f5c1a12..b592c1966a 100644 --- a/include/configs/P1_P2_RDB.h +++ b/include/configs/P1_P2_RDB.h @@ -141,7 +141,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #endif /* DDR Setup */ -#define CONFIG_FSL_DDR2 +#define CONFIG_SYS_FSL_DDR2 #undef CONFIG_FSL_DDR_INTERACTIVE #undef CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ diff --git a/include/configs/P2020COME.h b/include/configs/P2020COME.h index 9cc219e5a8..15d2a43cd0 100644 --- a/include/configs/P2020COME.h +++ b/include/configs/P2020COME.h @@ -105,7 +105,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR /* DDR Setup */ -#define CONFIG_FSL_DDR3 +#define CONFIG_SYS_FSL_DDR3 #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ #define CONFIG_DDR_SPD diff --git a/include/configs/P2020DS.h b/include/configs/P2020DS.h index 8a29eaa507..9d3d9b33e5 100644 --- a/include/configs/P2020DS.h +++ b/include/configs/P2020DS.h @@ -109,9 +109,9 @@ /* DDR Setup */ #define CONFIG_VERY_BIG_RAM #ifdef CONFIG_DDR2 -#define CONFIG_FSL_DDR2 +#define CONFIG_SYS_FSL_DDR2 #else -#define CONFIG_FSL_DDR3 1 +#define CONFIG_SYS_FSL_DDR3 1 #endif /* ECC will be enabled based on perf_mode environment variable */ diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h index 0df6f1a2d9..b238574b5d 100644 --- a/include/configs/P2041RDB.h +++ b/include/configs/P2041RDB.h @@ -175,7 +175,7 @@ unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR) #define CONFIG_DDR_SPD -#define CONFIG_FSL_DDR3 +#define CONFIG_SYS_FSL_DDR3 #define CONFIG_SYS_SPD_BUS_NUM 0 #define SPD_EEPROM_ADDRESS 0x52 diff --git a/include/configs/P4080DS.h b/include/configs/P4080DS.h index b0cd7d5c21..2f8900834d 100644 --- a/include/configs/P4080DS.h +++ b/include/configs/P4080DS.h @@ -17,6 +17,12 @@ #define CONFIG_MMC #define CONFIG_PCIE3 +#define CONFIG_CMD_SATA +#define CONFIG_SATA_SIL +#define CONFIG_SYS_SATA_MAX_DEVICE 2 +#define CONFIG_LIBATA +#define CONFIG_LBA48 + #define CONFIG_SYS_SRIO #define CONFIG_SRIO1 /* SRIO port 1 */ #define CONFIG_SRIO2 /* SRIO port 2 */ diff --git a/include/configs/PN62.h b/include/configs/PN62.h deleted file mode 100644 index 2a82f94b65..0000000000 --- a/include/configs/PN62.h +++ /dev/null @@ -1,285 +0,0 @@ -/* - * (C) Copyright 2002 - * Wolfgang Grandegger, DENX Software Engineering, wg@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* ------------------------------------------------------------------------- */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC824X 1 -#define CONFIG_MPC8240 1 -#define CONFIG_PN62 1 - -#define CONFIG_SYS_TEXT_BASE 0xFFF00000 - -#define CONFIG_CONS_INDEX 1 - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_PCI -#define CONFIG_CMD_BSP - -#undef CONFIG_CMD_FLASH -#undef CONFIG_CMD_IMLS -#undef CONFIG_CMD_LOADS -#undef CONFIG_CMD_SAVEENV -#undef CONFIG_CMD_SOURCE - - -#define CONFIG_BAUDRATE 19200 /* console baudrate */ - -#define CONFIG_BOOTDELAY 1 /* autoboot after n seconds */ - -#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */ - -#define CONFIG_SERVERIP 10.0.0.201 -#define CONFIG_IPADDR 10.0.0.200 -#define CONFIG_ROOTPATH "/opt/eldk/ppc_82xx" -#define CONFIG_NETMASK 255.255.255.0 -#undef CONFIG_BOOTARGS -#if 0 -/* Boot Linux with NFS root filesystem */ -#define CONFIG_BOOTCOMMAND \ - "setenv verify y;" \ - "setenv bootargs console=ttyS0,19200 mem=31M quiet " \ - "root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \ - "ip=${ipaddr}:${serverip}::${netmask}:pn62:eth0:off;" \ - "loadp 100000; bootm" - /* "tftpboot 100000 uImage; bootm" */ -#else -/* Boot Linux with RAMdisk based filesystem (initrd, BusyBox) */ -#define CONFIG_BOOTCOMMAND \ - "setenv verify n;" \ - "setenv bootargs console=ttyS0,19200 mem=31M quiet " \ - "root=/dev/ram rw " \ - "ip=${ipaddr}:${serverip}::${netmask}:pn62:eth0:off;" \ - "loadp 200000; bootm" -#endif - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP 1 /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */ - -#define CONFIG_PRAM 1024 /* reserve 1 MB protected RAM */ - -#define CONFIG_MISC_INIT_R 1 /* call misc_init_r() on init */ - -#define CONFIG_HAS_ETH1 1 /* add support for eth1addr */ - -#define CONFIG_SHOW_BOOT_PROGRESS 1 /* Show boot progress on LEDs */ - -/* - * PCI stuff - */ -#define CONFIG_PCI /* include pci support */ -#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ -#define CONFIG_PCI_PNP /* we need Plug 'n Play */ -#if 0 -#define CONFIG_PCI_SCAN_SHOW /* show PCI auto-scan at boot */ -#endif - -/* - * Networking stuff - */ - -#define CONFIG_PCNET /* there are 2 AMD PCnet 79C973 */ -#define CONFIG_PCNET_79C973 - -#define _IO_BASE 0xfe000000 /* points to PCI I/O space */ - - -/* - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_MAX_RAM_SIZE 0x10000000 - -#define CONFIG_SYS_RESET_ADDRESS 0xfff00100 - -#undef CONFIG_SYS_RAMBOOT -#define CONFIG_SYS_MONITOR_LEN 0x00030000 -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE - - -#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - - -#define CONFIG_SYS_NO_FLASH 1 /* There is no FLASH memory */ - -#define CONFIG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ -#define CONFIG_ENV_OFFSET 0x00004000 /* Offset of Environment Sector */ -#define CONFIG_ENV_SIZE 0x00002000 /* Total Size of Environment Sector */ - -#define CONFIG_SYS_MALLOC_LEN (512 << 10) /* Reserve 512 kB for malloc() */ - -#define CONFIG_SYS_MEMTEST_START 0x00004000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x01f00000 /* 0 ... 32 MB in DRAM */ - -/* - * Serial port configuration - */ - -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL - -#define CONFIG_SYS_NS16550_REG_SIZE 1 - -#define CONFIG_SYS_NS16550_CLK 1843200 - -#define CONFIG_SYS_NS16550_COM1 0xff800008 -#define CONFIG_SYS_NS16550_COM2 0xff800000 - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ - -#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */ -#define CONFIG_PLL_PCI_TO_MEM_MULTIPLIER 3 - -#define CONFIG_SYS_EUMB_ADDR 0xFCE00000 - -/* MCCR1 */ -#define CONFIG_SYS_ROMNAL 3 /* rom/flash next access time */ -#define CONFIG_SYS_ROMFAL 7 /* rom/flash access time */ - -/* MCCR2 */ -#define CONFIG_SYS_ASRISE 6 /* ASRISE in clocks */ -#define CONFIG_SYS_ASFALL 12 /* ASFALL in clocks */ -#define CONFIG_SYS_REFINT 5600 /* REFINT in clocks */ - -/* MCCR3 */ -#define CONFIG_SYS_BSTOPRE 0x3cf /* Burst To Precharge */ -#define CONFIG_SYS_REFREC 2 /* Refresh to activate interval */ -#define CONFIG_SYS_RDLAT 3 /* data latency from read command */ - -/* MCCR4 */ -#define CONFIG_SYS_PRETOACT 1 /* Precharge to activate interval */ -#define CONFIG_SYS_ACTTOPRE 3 /* Activate to Precharge interval */ -#define CONFIG_SYS_ACTORW 2 /* Activate to R/W */ -#define CONFIG_SYS_SDMODE_CAS_LAT 2 /* SDMODE CAS latency */ -#define CONFIG_SYS_SDMODE_WRAP 0 /* SDMODE Wrap type */ -#define CONFIG_SYS_SDMODE_BURSTLEN 2 /* SDMODE Burst length 2=4, 3=8 */ -#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1 - -/* Memory bank settings: - * - * only bits 20-29 are actually used from these vales to set the - * start/qend address the upper two bits will be 0, and the lower 20 - * bits will be set to 0x00000 for a start address, or 0xfffff for an - * end address - */ -#define CONFIG_SYS_BANK0_START 0x00000000 -#define CONFIG_SYS_BANK0_END (CONFIG_SYS_MAX_RAM_SIZE - 1) -#define CONFIG_SYS_BANK0_ENABLE 1 -#define CONFIG_SYS_BANK1_START 0x00000000 -#define CONFIG_SYS_BANK1_END 0x00000000 -#define CONFIG_SYS_BANK1_ENABLE 0 -#define CONFIG_SYS_BANK2_START 0x00000000 -#define CONFIG_SYS_BANK2_END 0x00000000 -#define CONFIG_SYS_BANK2_ENABLE 0 -#define CONFIG_SYS_BANK3_START 0x00000000 -#define CONFIG_SYS_BANK3_END 0x00000000 -#define CONFIG_SYS_BANK3_ENABLE 0 -#define CONFIG_SYS_BANK4_START 0x00000000 -#define CONFIG_SYS_BANK4_END 0x00000000 -#define CONFIG_SYS_BANK4_ENABLE 0 -#define CONFIG_SYS_BANK5_START 0x00000000 -#define CONFIG_SYS_BANK5_END 0x00000000 -#define CONFIG_SYS_BANK5_ENABLE 0 -#define CONFIG_SYS_BANK6_START 0x00000000 -#define CONFIG_SYS_BANK6_END 0x00000000 -#define CONFIG_SYS_BANK6_ENABLE 0 -#define CONFIG_SYS_BANK7_START 0x00000000 -#define CONFIG_SYS_BANK7_END 0x00000000 -#define CONFIG_SYS_BANK7_ENABLE 0 - -/* - * Memory bank enable bitmask, specifying which of the banks defined above - * are actually present. MSB is for bank #7, LSB is for bank #0. - */ -#define CONFIG_SYS_BANK_ENABLE 0x01 - -#define CONFIG_SYS_ODCR 0xff /* configures line driver impedances, */ - /* see 8240 book for bit definitions */ -#define CONFIG_SYS_PGMAX 0x32 /* how long the 8240 retains the */ - /* currently accessed page in memory */ - /* see 8240 book for details */ - -/* SDRAM 0 - 256MB */ -#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) - -#define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) - -/* PCI memory space */ -#define CONFIG_SYS_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP) - -/* Config addrs, etc */ -#define CONFIG_SYS_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP) - -#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L -#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U -#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L -#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U -#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L -#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U -#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L -#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/* - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8240 CPU */ -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -#endif /* __CONFIG_H */ diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h index 2738242c54..43a5778004 100644 --- a/include/configs/T1040QDS.h +++ b/include/configs/T1040QDS.h @@ -32,6 +32,8 @@ #ifdef CONFIG_RAMBOOT_PBL #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc +#define CONFIG_PBLPBI_CONFIG $(SRCTREE)/board/freescale/t1040qds/t1040_pbi.cfg +#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/t1040qds/t1040_rcw.cfg #endif /* High Level Configuration Options */ @@ -168,7 +170,7 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR) #define CONFIG_DDR_SPD -#define CONFIG_FSL_DDR3 +#define CONFIG_SYS_FSL_DDR3 #define CONFIG_FSL_DDR_INTERACTIVE #define CONFIG_SYS_SPD_BUS_NUM 0 diff --git a/include/configs/T1040RDB.h b/include/configs/T1040RDB.h new file mode 100644 index 0000000000..79312311d8 --- /dev/null +++ b/include/configs/T1040RDB.h @@ -0,0 +1,690 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * T1040 RDB board configuration file + */ +#define CONFIG_T104xRDB +#define CONFIG_T1040RDB +#define CONFIG_PHYS_64BIT + +#ifdef CONFIG_RAMBOOT_PBL +#define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE +#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc +#endif + +/* High Level Configuration Options */ +#define CONFIG_BOOKE +#define CONFIG_E500 /* BOOKE e500 family */ +#define CONFIG_E500MC /* BOOKE e500mc family */ +#define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ +#define CONFIG_MPC85xx /* MPC85xx/PQ3 platform */ +#define CONFIG_MP /* support multiple processors */ + +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xeff80000 +#endif + +#ifndef CONFIG_RESET_VECTOR_ADDRESS +#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc +#endif + +#define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ +#define CONFIG_SYS_NUM_CPC CONFIG_NUM_DDR_CONTROLLERS +#define CONFIG_FSL_IFC /* Enable IFC Support */ +#define CONFIG_PCI /* Enable PCI/PCIE */ +#define CONFIG_PCI_INDIRECT_BRIDGE +#define CONFIG_PCIE1 /* PCIE controler 1 */ +#define CONFIG_PCIE2 /* PCIE controler 2 */ +#define CONFIG_PCIE3 /* PCIE controler 3 */ +#define CONFIG_PCIE4 /* PCIE controler 4 */ + +#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ +#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ + +#define CONFIG_FSL_LAW /* Use common FSL init code */ + +#define CONFIG_ENV_OVERWRITE + +#ifdef CONFIG_SYS_NO_FLASH +#define CONFIG_ENV_IS_NOWHERE +#else +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE +#endif + +#ifndef CONFIG_SYS_NO_FLASH +#if defined(CONFIG_SPIFLASH) +#define CONFIG_SYS_EXTRA_ENV_RELOC +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_SPI_BUS 0 +#define CONFIG_ENV_SPI_CS 0 +#define CONFIG_ENV_SPI_MAX_HZ 10000000 +#define CONFIG_ENV_SPI_MODE 0 +#define CONFIG_ENV_SIZE 0x2000 /* 8KB */ +#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ +#define CONFIG_ENV_SECT_SIZE 0x10000 +#elif defined(CONFIG_SDCARD) +#define CONFIG_SYS_EXTRA_ENV_RELOC +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_OFFSET (512 * 1105) +#elif defined(CONFIG_NAND) +#define CONFIG_SYS_EXTRA_ENV_RELOC +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE +#define CONFIG_ENV_OFFSET (5 * CONFIG_SYS_NAND_BLOCK_SIZE) +#else +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ +#endif +#else /* CONFIG_SYS_NO_FLASH */ +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ +#endif + +#define CONFIG_SYS_CLK_FREQ 100000000 +#define CONFIG_DDR_CLK_FREQ 66666666 + +/* + * These can be toggled for performance analysis, otherwise use default. + */ +#define CONFIG_SYS_CACHE_STASHING +#define CONFIG_BACKSIDE_L2_CACHE +#define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E +#define CONFIG_BTB /* toggle branch predition */ +#define CONFIG_DDR_ECC +#ifdef CONFIG_DDR_ECC +#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER +#define CONFIG_MEM_INIT_VALUE 0xdeadbeef +#endif + +#define CONFIG_ENABLE_36BIT_PHYS + +#define CONFIG_ADDR_MAP +#define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ + +#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x00400000 +#define CONFIG_SYS_ALT_MEMTEST +#define CONFIG_PANIC_HANG /* do not reset board on panic */ + +/* + * Config the L3 Cache as L3 SRAM + */ +#define CONFIG_SYS_INIT_L3_ADDR 0xFFFC0000 + +#define CONFIG_SYS_DCSRBAR 0xf0000000 +#define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull + +/* + * DDR Setup + */ +#define CONFIG_VERY_BIG_RAM +#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE + +/* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */ +#define CONFIG_DIMM_SLOTS_PER_CTLR 1 +#define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR) + +#define CONFIG_DDR_SPD +#define CONFIG_SYS_DDR_RAW_TIMING +#define CONFIG_SYS_FSL_DDR3 + +#define CONFIG_SYS_SPD_BUS_NUM 0 +#define SPD_EEPROM_ADDRESS 0x51 + +#define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ + +/* + * IFC Definitions + */ +#define CONFIG_SYS_FLASH_BASE 0xe8000000 +#define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) + +#define CONFIG_SYS_NOR_CSPR_EXT (0xf) +#define CONFIG_SYS_NOR_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE) | \ + CSPR_PORT_SIZE_16 | \ + CSPR_MSEL_NOR | \ + CSPR_V) +#define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) +/* NOR Flash Timing Params */ +#define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80 +#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ + FTIM0_NOR_TEADC(0x5) | \ + FTIM0_NOR_TEAHC(0x5)) +#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ + FTIM1_NOR_TRAD_NOR(0x1A) |\ + FTIM1_NOR_TSEQRAD_NOR(0x13)) +#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ + FTIM2_NOR_TCH(0x4) | \ + FTIM2_NOR_TWPH(0x0E) | \ + FTIM2_NOR_TWP(0x1c)) +#define CONFIG_SYS_NOR_FTIM3 0x0 + +#define CONFIG_SYS_FLASH_QUIET_TEST +#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ + +#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ +#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ + +#define CONFIG_SYS_FLASH_EMPTY_INFO +#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} + +/* CPLD on IFC */ +#define CONFIG_SYS_CPLD_BASE 0xffdf0000 +#define CONFIG_SYS_CPLD_BASE_PHYS (0xf00000000ull | CONFIG_SYS_CPLD_BASE) +#define CONFIG_SYS_CSPR2 (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \ + | CSPR_PORT_SIZE_8 \ + | CSPR_MSEL_GPCM \ + | CSPR_V) +#define CONFIG_SYS_AMASK2 IFC_AMASK(64*1024) +#define CONFIG_SYS_CSOR2 0x0 +/* CPLD Timing parameters for IFC CS2 */ +#define CONFIG_SYS_CS2_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ + FTIM0_GPCM_TEADC(0x0e) | \ + FTIM0_GPCM_TEAHC(0x0e)) +#define CONFIG_SYS_CS2_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \ + FTIM1_GPCM_TRAD(0x1f)) +#define CONFIG_SYS_CS2_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ + FTIM2_GPCM_TCH(0x0) | \ + FTIM2_GPCM_TWP(0x1f)) +#define CONFIG_SYS_CS2_FTIM3 0x0 + +/* NAND Flash on IFC */ +#define CONFIG_NAND_FSL_IFC +#define CONFIG_SYS_NAND_BASE 0xff800000 +#define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE) + +#define CONFIG_SYS_NAND_CSPR_EXT (0xf) +#define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ + | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ + | CSPR_MSEL_NAND /* MSEL = NAND */ \ + | CSPR_V) +#define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) + +#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ + | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ + | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ + | CSOR_NAND_RAL_3 /* RAL = 3Byes */ \ + | CSOR_NAND_PGS_4K /* Page Size = 4K */ \ + | CSOR_NAND_SPRZ_224/* Spare size = 224 */ \ + | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ + +#define CONFIG_SYS_NAND_ONFI_DETECTION + +/* ONFI NAND Flash mode0 Timing Params */ +#define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \ + FTIM0_NAND_TWP(0x18) | \ + FTIM0_NAND_TWCHT(0x07) | \ + FTIM0_NAND_TWH(0x0a)) +#define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ + FTIM1_NAND_TWBE(0x39) | \ + FTIM1_NAND_TRR(0x0e) | \ + FTIM1_NAND_TRP(0x18)) +#define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ + FTIM2_NAND_TREH(0x0a) | \ + FTIM2_NAND_TWHRE(0x1e)) +#define CONFIG_SYS_NAND_FTIM3 0x0 + +#define CONFIG_SYS_NAND_DDR_LAW 11 +#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_MTD_NAND_VERIFY_WRITE +#define CONFIG_CMD_NAND + +#define CONFIG_SYS_NAND_BLOCK_SIZE (512 * 1024) + +#if defined(CONFIG_NAND) +#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT +#define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR +#define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK +#define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR +#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 +#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 +#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 +#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 +#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR_CSPR_EXT +#define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR_CSPR +#define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK +#define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR +#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 +#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 +#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 +#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 +#else +#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR_CSPR_EXT +#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR_CSPR +#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK +#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR +#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 +#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 +#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 +#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 +#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NAND_CSPR_EXT +#define CONFIG_SYS_CSPR1 CONFIG_SYS_NAND_CSPR +#define CONFIG_SYS_AMASK1 CONFIG_SYS_NAND_AMASK +#define CONFIG_SYS_CSOR1 CONFIG_SYS_NAND_CSOR +#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NAND_FTIM0 +#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1 +#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2 +#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3 +#endif + +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE + +#if defined(CONFIG_RAMBOOT_PBL) +#define CONFIG_SYS_RAMBOOT +#endif + +#define CONFIG_BOARD_EARLY_INIT_R +#define CONFIG_MISC_INIT_R + +#define CONFIG_HWCONFIG + +/* define to use L1 as initial stack */ +#define CONFIG_L1_INIT_RAM +#define CONFIG_SYS_INIT_RAM_LOCK +#define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe0ec000 +/* The assembler doesn't like typecast */ +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ + ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ + CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) +#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 + +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET + +#define CONFIG_SYS_MONITOR_LEN (512 * 1024) +#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) + +/* Serial Port - controlled on board with jumper J8 + * open - index 2 + * shorted - index 1 + */ +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) + +#define CONFIG_SYS_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} + +#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) +#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) +#define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) +#define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) +#define CONFIG_SERIAL_MULTI /* Enable both serial ports */ +#define CONFIG_SYS_CONSOLE_IS_IN_ENV /* determine from environment */ + +/* Use the HUSH parser */ +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " + +/* pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT +#define CONFIG_OF_BOARD_SETUP +#define CONFIG_OF_STDOUT_VIA_ALIAS + +/* new uImage format support */ +#define CONFIG_FIT +#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ + +/* I2C */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_FSL /* Use FSL common I2C driver */ +#define CONFIG_SYS_FSL_I2C_SPEED 400000 /* I2C speed in Hz */ +#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F +#define CONFIG_SYS_FSL_I2C2_SPEED 400000 /* I2C speed in Hz */ +#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F +#define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 +#define CONFIG_SYS_FSL_I2C2_OFFSET 0x119000 + +/* I2C bus multiplexer */ +#define I2C_MUX_PCA_ADDR 0x70 +#define I2C_MUX_CH_DEFAULT 0x8 + + +/* + * eSPI - Enhanced SPI + */ +#define CONFIG_FSL_ESPI +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_STMICRO +#define CONFIG_CMD_SF +#define CONFIG_SF_DEFAULT_SPEED 10000000 +#define CONFIG_SF_DEFAULT_MODE 0 + +/* + * General PCI + * Memory space is mapped 1-1, but I/O space must start from 0. + */ + +#ifdef CONFIG_PCI +/* controller 1, direct to uli, tgtid 3, Base address 20000 */ +#ifdef CONFIG_PCIE1 +#define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 +#define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 +#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull +#define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000 /* 256M */ +#define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 +#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull +#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ +#endif + +/* controller 2, Slot 2, tgtid 2, Base address 201000 */ +#ifdef CONFIG_PCIE2 +#define CONFIG_SYS_PCIE2_MEM_VIRT 0x90000000 +#define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 +#define CONFIG_SYS_PCIE2_MEM_PHYS 0xc10000000ull +#define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000 /* 256M */ +#define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 +#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull +#define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ +#endif + +/* controller 3, Slot 1, tgtid 1, Base address 202000 */ +#ifdef CONFIG_PCIE3 +#define CONFIG_SYS_PCIE3_MEM_VIRT 0xa0000000 +#define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 +#define CONFIG_SYS_PCIE3_MEM_PHYS 0xc20000000ull +#define CONFIG_SYS_PCIE3_MEM_SIZE 0x10000000 /* 256M */ +#define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 +#define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull +#define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ +#endif + +/* controller 4, Base address 203000 */ +#ifdef CONFIG_PCIE4 +#define CONFIG_SYS_PCIE4_MEM_VIRT 0xb0000000 +#define CONFIG_SYS_PCIE4_MEM_BUS 0xe0000000 +#define CONFIG_SYS_PCIE4_MEM_PHYS 0xc30000000ull +#define CONFIG_SYS_PCIE4_MEM_SIZE 0x10000000 /* 256M */ +#define CONFIG_SYS_PCIE4_IO_VIRT 0xf8030000 +#define CONFIG_SYS_PCIE4_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull +#define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */ +#endif + +#define CONFIG_PCI_PNP /* do pci plug-and-play */ +#define CONFIG_E1000 + +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CONFIG_DOS_PARTITION +#endif /* CONFIG_PCI */ + +/* SATA */ +#define CONFIG_FSL_SATA_V2 +#ifdef CONFIG_FSL_SATA_V2 +#define CONFIG_LIBATA +#define CONFIG_FSL_SATA + +#define CONFIG_SYS_SATA_MAX_DEVICE 1 +#define CONFIG_SATA1 +#define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR +#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA + +#define CONFIG_LBA48 +#define CONFIG_CMD_SATA +#define CONFIG_DOS_PARTITION +#define CONFIG_CMD_EXT2 +#endif + +/* +* USB +*/ +#define CONFIG_HAS_FSL_DR_USB + +#ifdef CONFIG_HAS_FSL_DR_USB +#define CONFIG_USB_EHCI + +#ifdef CONFIG_USB_EHCI +#define CONFIG_CMD_USB +#define CONFIG_USB_STORAGE +#define CONFIG_USB_EHCI_FSL +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET +#define CONFIG_CMD_EXT2 +#endif +#endif + +#define CONFIG_MMC + +#ifdef CONFIG_MMC +#define CONFIG_FSL_ESDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR +#define CONFIG_CMD_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION +#endif + +/* Qman/Bman */ +#ifndef CONFIG_NOBQFMAN +#define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ +#define CONFIG_SYS_BMAN_NUM_PORTALS 25 +#define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 +#define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull +#define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 +#define CONFIG_SYS_QMAN_NUM_PORTALS 25 +#define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 +#define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull +#define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 + +#define CONFIG_SYS_DPAA_FMAN +#define CONFIG_SYS_DPAA_PME + +/* Default address of microcode for the Linux Fman driver */ +#if defined(CONFIG_SPIFLASH) +/* + * env is stored at 0x100000, sector size is 0x10000, ucode is stored after + * env, so we got 0x110000. + */ +#define CONFIG_SYS_QE_FW_IN_SPIFLASH +#define CONFIG_SYS_QE_FMAN_FW_ADDR 0x110000 +#elif defined(CONFIG_SDCARD) +/* + * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is + * about 545KB (1089 blocks), Env is stored after the image, and the env size is + * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130. + */ +#define CONFIG_SYS_QE_FMAN_FW_IN_MMC +#define CONFIG_SYS_QE_FMAN_FW_ADDR (512 * 1130) +#elif defined(CONFIG_NAND) +#define CONFIG_SYS_QE_FMAN_FW_IN_NAND +#define CONFIG_SYS_QE_FMAN_FW_ADDR (6 * CONFIG_SYS_NAND_BLOCK_SIZE) +#else +#define CONFIG_SYS_QE_FMAN_FW_IN_NOR +#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF40000 +#endif +#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 +#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) +#endif /* CONFIG_NOBQFMAN */ + +#ifdef CONFIG_SYS_DPAA_FMAN +#define CONFIG_FMAN_ENET +#define CONFIG_PHY_VITESSE +#define CONFIG_PHY_REALTEK +#endif + +#ifdef CONFIG_FMAN_ENET +#define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR 0x1c +#define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR 0x1d +#define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR 0x1e +#define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR 0x1f + +#define CONFIG_MII /* MII PHY management */ +#define CONFIG_ETHPRIME "FM1@DTSEC1" +#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ +#endif + +/* + * Environment + */ +#define CONFIG_LOADS_ECHO /* echo on for serial download */ +#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ELF +#define CONFIG_CMD_ERRATA +#define CONFIG_CMD_GREPENV +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SETEXPR + +#ifdef CONFIG_PCI +#define CONFIG_CMD_PCI +#define CONFIG_CMD_NET +#endif + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_CMDLINE_EDITING /* Command-line editing */ +#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ +#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ +#ifdef CONFIG_CMD_KGDB +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ +#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks*/ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 64 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ +#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ + +#ifdef CONFIG_CMD_KGDB +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* + * Environment Configuration + */ +#define CONFIG_ROOTPATH "/opt/nfsroot" +#define CONFIG_BOOTFILE "uImage" +#define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server*/ + +/* default location for tftp and bootm */ +#define CONFIG_LOADADDR 1000000 + +#define CONFIG_BOOTDELAY 10 /*-1 disables auto-boot*/ + +#define CONFIG_BAUDRATE 115200 + +#define __USB_PHY_TYPE utmi + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "hwconfig=fsl_ddr:ctlr_intlv=cacheline," \ + "bank_intlv=cs0_cs1;" \ + "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ + "netdev=eth0\0" \ + "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ + "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ + "tftpflash=tftpboot $loadaddr $uboot && " \ + "protect off $ubootaddr +$filesize && " \ + "erase $ubootaddr +$filesize && " \ + "cp.b $loadaddr $ubootaddr $filesize && " \ + "protect on $ubootaddr +$filesize && " \ + "cmp.b $loadaddr $ubootaddr $filesize\0" \ + "consoledev=ttyS0\0" \ + "ramdiskaddr=2000000\0" \ + "ramdiskfile=t1040rdb/ramdisk.uboot\0" \ + "fdtaddr=c00000\0" \ + "fdtfile=t1040rdb/t1040rdb.dtb\0" \ + "bdev=sda3\0" \ + "c=ffe\0" + +#define CONFIG_LINUX \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "setenv ramdiskaddr 0x02000000;" \ + "setenv fdtaddr 0x00c00000;" \ + "setenv loadaddr 0x1000000;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + +#define CONFIG_HDBOOT \ + "setenv bootargs root=/dev/$bdev rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_NFSBOOTCOMMAND \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + +#define CONFIG_BOOTCOMMAND CONFIG_LINUX + +#ifdef CONFIG_SECURE_BOOT +#include <asm/fsl_secure_boot.h> +#endif + +#endif /* __CONFIG_H */ diff --git a/include/configs/T1042RDB_PI.h b/include/configs/T1042RDB_PI.h new file mode 100644 index 0000000000..eff08e3804 --- /dev/null +++ b/include/configs/T1042RDB_PI.h @@ -0,0 +1,694 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * T1042RDB_PI board configuration file + */ +#define CONFIG_T104xRDB +#define CONFIG_T1042RDB_PI +#define CONFIG_PHYS_64BIT + +#ifdef CONFIG_RAMBOOT_PBL +#define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE +#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc +#endif + +/* High Level Configuration Options */ +#define CONFIG_BOOKE +#define CONFIG_E500 /* BOOKE e500 family */ +#define CONFIG_E500MC /* BOOKE e500mc family */ +#define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ +#define CONFIG_MPC85xx /* MPC85xx/PQ3 platform */ +#define CONFIG_MP /* support multiple processors */ + +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xeff80000 +#endif + +#ifndef CONFIG_RESET_VECTOR_ADDRESS +#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc +#endif + +#define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ +#define CONFIG_SYS_NUM_CPC CONFIG_NUM_DDR_CONTROLLERS +#define CONFIG_FSL_IFC /* Enable IFC Support */ +#define CONFIG_PCI /* Enable PCI/PCIE */ +#define CONFIG_PCI_INDIRECT_BRIDGE +#define CONFIG_PCIE1 /* PCIE controler 1 */ +#define CONFIG_PCIE2 /* PCIE controler 2 */ +#define CONFIG_PCIE3 /* PCIE controler 3 */ +#define CONFIG_PCIE4 /* PCIE controler 4 */ + +#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ +#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ + +#define CONFIG_FSL_LAW /* Use common FSL init code */ + +#define CONFIG_ENV_OVERWRITE + +#ifdef CONFIG_SYS_NO_FLASH +#define CONFIG_ENV_IS_NOWHERE +#else +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE +#endif + +#ifndef CONFIG_SYS_NO_FLASH +#if defined(CONFIG_SPIFLASH) +#define CONFIG_SYS_EXTRA_ENV_RELOC +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_SPI_BUS 0 +#define CONFIG_ENV_SPI_CS 0 +#define CONFIG_ENV_SPI_MAX_HZ 10000000 +#define CONFIG_ENV_SPI_MODE 0 +#define CONFIG_ENV_SIZE 0x2000 /* 8KB */ +#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ +#define CONFIG_ENV_SECT_SIZE 0x10000 +#elif defined(CONFIG_SDCARD) +#define CONFIG_SYS_EXTRA_ENV_RELOC +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_OFFSET (512 * 1105) +#elif defined(CONFIG_NAND) +#define CONFIG_SYS_EXTRA_ENV_RELOC +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE +#define CONFIG_ENV_OFFSET (5 * CONFIG_SYS_NAND_BLOCK_SIZE) +#else +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ +#endif +#else /* CONFIG_SYS_NO_FLASH */ +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ +#endif + +#define CONFIG_SYS_CLK_FREQ 100000000 +#define CONFIG_DDR_CLK_FREQ 66666666 + +/* + * These can be toggled for performance analysis, otherwise use default. + */ +#define CONFIG_SYS_CACHE_STASHING +#define CONFIG_BACKSIDE_L2_CACHE +#define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E +#define CONFIG_BTB /* toggle branch predition */ +#define CONFIG_DDR_ECC +#ifdef CONFIG_DDR_ECC +#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER +#define CONFIG_MEM_INIT_VALUE 0xdeadbeef +#endif + +#define CONFIG_ENABLE_36BIT_PHYS + +#define CONFIG_ADDR_MAP +#define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ + +#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x00400000 +#define CONFIG_SYS_ALT_MEMTEST +#define CONFIG_PANIC_HANG /* do not reset board on panic */ + +/* + * Config the L3 Cache as L3 SRAM + */ +#define CONFIG_SYS_INIT_L3_ADDR 0xFFFC0000 + +#define CONFIG_SYS_DCSRBAR 0xf0000000 +#define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull + +/* + * DDR Setup + */ +#define CONFIG_VERY_BIG_RAM +#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE + +/* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */ +#define CONFIG_DIMM_SLOTS_PER_CTLR 1 +#define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR) + +#define CONFIG_DDR_SPD +#define CONFIG_SYS_DDR_RAW_TIMING +#define CONFIG_SYS_FSL_DDR3 + +#define CONFIG_SYS_SPD_BUS_NUM 0 +#define SPD_EEPROM_ADDRESS 0x51 + +#define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ + +/* + * IFC Definitions + */ +#define CONFIG_SYS_FLASH_BASE 0xe8000000 +#define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) + +#define CONFIG_SYS_NOR_CSPR_EXT (0xf) +#define CONFIG_SYS_NOR_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE) | \ + CSPR_PORT_SIZE_16 | \ + CSPR_MSEL_NOR | \ + CSPR_V) +#define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) +/* NOR Flash Timing Params */ +#define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80 +#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ + FTIM0_NOR_TEADC(0x5) | \ + FTIM0_NOR_TEAHC(0x5)) +#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ + FTIM1_NOR_TRAD_NOR(0x1A) |\ + FTIM1_NOR_TSEQRAD_NOR(0x13)) +#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ + FTIM2_NOR_TCH(0x4) | \ + FTIM2_NOR_TWPH(0x0E) | \ + FTIM2_NOR_TWP(0x1c)) +#define CONFIG_SYS_NOR_FTIM3 0x0 + +#define CONFIG_SYS_FLASH_QUIET_TEST +#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ + +#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ +#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ + +#define CONFIG_SYS_FLASH_EMPTY_INFO +#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} + +/* CPLD on IFC */ +#define CONFIG_SYS_CPLD_BASE 0xffdf0000 +#define CONFIG_SYS_CPLD_BASE_PHYS (0xf00000000ull | CONFIG_SYS_CPLD_BASE) +#define CONFIG_SYS_CSPR2 (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \ + | CSPR_PORT_SIZE_8 \ + | CSPR_MSEL_GPCM \ + | CSPR_V) +#define CONFIG_SYS_AMASK2 IFC_AMASK(64*1024) +#define CONFIG_SYS_CSOR2 0x0 +/* CPLD Timing parameters for IFC CS2 */ +#define CONFIG_SYS_CS2_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ + FTIM0_GPCM_TEADC(0x0e) | \ + FTIM0_GPCM_TEAHC(0x0e)) +#define CONFIG_SYS_CS2_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \ + FTIM1_GPCM_TRAD(0x1f)) +#define CONFIG_SYS_CS2_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ + FTIM2_GPCM_TCH(0x0) | \ + FTIM2_GPCM_TWP(0x1f)) +#define CONFIG_SYS_CS2_FTIM3 0x0 + +/* NAND Flash on IFC */ +#define CONFIG_NAND_FSL_IFC +#define CONFIG_SYS_NAND_BASE 0xff800000 +#define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE) + +#define CONFIG_SYS_NAND_CSPR_EXT (0xf) +#define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ + | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ + | CSPR_MSEL_NAND /* MSEL = NAND */ \ + | CSPR_V) +#define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) + +#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ + | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ + | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ + | CSOR_NAND_RAL_3 /* RAL = 3Byes */ \ + | CSOR_NAND_PGS_4K /* Page Size = 4K */ \ + | CSOR_NAND_SPRZ_224/* Spare size = 224 */ \ + | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ + +#define CONFIG_SYS_NAND_ONFI_DETECTION + +/* ONFI NAND Flash mode0 Timing Params */ +#define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \ + FTIM0_NAND_TWP(0x18) | \ + FTIM0_NAND_TWCHT(0x07) | \ + FTIM0_NAND_TWH(0x0a)) +#define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ + FTIM1_NAND_TWBE(0x39) | \ + FTIM1_NAND_TRR(0x0e) | \ + FTIM1_NAND_TRP(0x18)) +#define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ + FTIM2_NAND_TREH(0x0a) | \ + FTIM2_NAND_TWHRE(0x1e)) +#define CONFIG_SYS_NAND_FTIM3 0x0 + +#define CONFIG_SYS_NAND_DDR_LAW 11 +#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_MTD_NAND_VERIFY_WRITE +#define CONFIG_CMD_NAND + +#define CONFIG_SYS_NAND_BLOCK_SIZE (512 * 1024) + +#if defined(CONFIG_NAND) +#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT +#define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR +#define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK +#define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR +#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 +#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 +#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 +#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 +#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR_CSPR_EXT +#define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR_CSPR +#define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK +#define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR +#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 +#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 +#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 +#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 +#else +#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR_CSPR_EXT +#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR_CSPR +#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK +#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR +#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 +#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 +#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 +#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 +#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NAND_CSPR_EXT +#define CONFIG_SYS_CSPR1 CONFIG_SYS_NAND_CSPR +#define CONFIG_SYS_AMASK1 CONFIG_SYS_NAND_AMASK +#define CONFIG_SYS_CSOR1 CONFIG_SYS_NAND_CSOR +#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NAND_FTIM0 +#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1 +#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2 +#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3 +#endif + +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE + +#if defined(CONFIG_RAMBOOT_PBL) +#define CONFIG_SYS_RAMBOOT +#endif + +#define CONFIG_BOARD_EARLY_INIT_R +#define CONFIG_MISC_INIT_R + +#define CONFIG_HWCONFIG + +/* define to use L1 as initial stack */ +#define CONFIG_L1_INIT_RAM +#define CONFIG_SYS_INIT_RAM_LOCK +#define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe0ec000 +/* The assembler doesn't like typecast */ +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ + ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ + CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) +#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 + +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET + +#define CONFIG_SYS_MONITOR_LEN (512 * 1024) +#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) + +/* Serial Port - controlled on board with jumper J8 + * open - index 2 + * shorted - index 1 + */ +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) + +#define CONFIG_SYS_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} + +#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) +#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) +#define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) +#define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) +#define CONFIG_SERIAL_MULTI /* Enable both serial ports */ +#define CONFIG_SYS_CONSOLE_IS_IN_ENV /* determine from environment */ + +/* Use the HUSH parser */ +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " + +/* pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT +#define CONFIG_OF_BOARD_SETUP +#define CONFIG_OF_STDOUT_VIA_ALIAS + +/* new uImage format support */ +#define CONFIG_FIT +#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ + +/* I2C */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_FSL /* Use FSL common I2C driver */ +#define CONFIG_SYS_FSL_I2C_SPEED 400000 /* I2C speed in Hz */ +#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F +#define CONFIG_SYS_FSL_I2C2_SPEED 400000 /* I2C speed in Hz */ +#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F +#define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 +#define CONFIG_SYS_FSL_I2C2_OFFSET 0x119000 + +/* I2C bus multiplexer */ +#define I2C_MUX_PCA_ADDR 0x70 + +/* + * RTC configuration + */ +#define RTC +#define CONFIG_RTC_DS1337 1 +#define CONFIG_SYS_I2C_RTC_ADDR 0x68 + +/*DVI encoder*/ +#define CONFIG_HDMI_ENCODER_I2C_ADDR 0x75 + +/* + * eSPI - Enhanced SPI + */ +#define CONFIG_FSL_ESPI +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_STMICRO +#define CONFIG_CMD_SF +#define CONFIG_SF_DEFAULT_SPEED 10000000 +#define CONFIG_SF_DEFAULT_MODE 0 + +/* + * General PCI + * Memory space is mapped 1-1, but I/O space must start from 0. + */ + +#ifdef CONFIG_PCI +/* controller 1, direct to uli, tgtid 3, Base address 20000 */ +#ifdef CONFIG_PCIE1 +#define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 +#define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 +#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull +#define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000 /* 256M */ +#define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 +#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull +#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ +#endif + +/* controller 2, Slot 2, tgtid 2, Base address 201000 */ +#ifdef CONFIG_PCIE2 +#define CONFIG_SYS_PCIE2_MEM_VIRT 0x90000000 +#define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 +#define CONFIG_SYS_PCIE2_MEM_PHYS 0xc10000000ull +#define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000 /* 256M */ +#define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 +#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull +#define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ +#endif + +/* controller 3, Slot 1, tgtid 1, Base address 202000 */ +#ifdef CONFIG_PCIE3 +#define CONFIG_SYS_PCIE3_MEM_VIRT 0xa0000000 +#define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 +#define CONFIG_SYS_PCIE3_MEM_PHYS 0xc20000000ull +#define CONFIG_SYS_PCIE3_MEM_SIZE 0x10000000 /* 256M */ +#define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 +#define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull +#define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ +#endif + +/* controller 4, Base address 203000 */ +#ifdef CONFIG_PCIE4 +#define CONFIG_SYS_PCIE4_MEM_VIRT 0xb0000000 +#define CONFIG_SYS_PCIE4_MEM_BUS 0xe0000000 +#define CONFIG_SYS_PCIE4_MEM_PHYS 0xc30000000ull +#define CONFIG_SYS_PCIE4_MEM_SIZE 0x10000000 /* 256M */ +#define CONFIG_SYS_PCIE4_IO_VIRT 0xf8030000 +#define CONFIG_SYS_PCIE4_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull +#define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */ +#endif + +#define CONFIG_PCI_PNP /* do pci plug-and-play */ +#define CONFIG_E1000 + +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CONFIG_DOS_PARTITION +#endif /* CONFIG_PCI */ + +/* SATA */ +#define CONFIG_FSL_SATA_V2 +#ifdef CONFIG_FSL_SATA_V2 +#define CONFIG_LIBATA +#define CONFIG_FSL_SATA + +#define CONFIG_SYS_SATA_MAX_DEVICE 1 +#define CONFIG_SATA1 +#define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR +#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA + +#define CONFIG_LBA48 +#define CONFIG_CMD_SATA +#define CONFIG_DOS_PARTITION +#define CONFIG_CMD_EXT2 +#endif + +/* +* USB +*/ +#define CONFIG_HAS_FSL_DR_USB + +#ifdef CONFIG_HAS_FSL_DR_USB +#define CONFIG_USB_EHCI + +#ifdef CONFIG_USB_EHCI +#define CONFIG_CMD_USB +#define CONFIG_USB_STORAGE +#define CONFIG_USB_EHCI_FSL +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET +#define CONFIG_CMD_EXT2 +#endif +#endif + +#define CONFIG_MMC + +#ifdef CONFIG_MMC +#define CONFIG_FSL_ESDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR +#define CONFIG_CMD_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION +#endif + +/* Qman/Bman */ +#ifndef CONFIG_NOBQFMAN +#define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ +#define CONFIG_SYS_BMAN_NUM_PORTALS 25 +#define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 +#define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull +#define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 +#define CONFIG_SYS_QMAN_NUM_PORTALS 25 +#define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 +#define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull +#define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 + +#define CONFIG_SYS_DPAA_FMAN +#define CONFIG_SYS_DPAA_PME + +/* Default address of microcode for the Linux Fman driver */ +#if defined(CONFIG_SPIFLASH) +/* + * env is stored at 0x100000, sector size is 0x10000, ucode is stored after + * env, so we got 0x110000. + */ +#define CONFIG_SYS_QE_FW_IN_SPIFLASH +#define CONFIG_SYS_QE_FMAN_FW_ADDR 0x110000 +#elif defined(CONFIG_SDCARD) +/* + * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is + * about 545KB (1089 blocks), Env is stored after the image, and the env size is + * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130. + */ +#define CONFIG_SYS_QE_FMAN_FW_IN_MMC +#define CONFIG_SYS_QE_FMAN_FW_ADDR (512 * 1130) +#elif defined(CONFIG_NAND) +#define CONFIG_SYS_QE_FMAN_FW_IN_NAND +#define CONFIG_SYS_QE_FMAN_FW_ADDR (6 * CONFIG_SYS_NAND_BLOCK_SIZE) +#else +#define CONFIG_SYS_QE_FMAN_FW_IN_NOR +#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF40000 +#endif +#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 +#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) +#endif /* CONFIG_NOBQFMAN */ + +#ifdef CONFIG_SYS_DPAA_FMAN +#define CONFIG_FMAN_ENET +#define CONFIG_PHY_VITESSE +#define CONFIG_PHY_REALTEK +#endif + +#ifdef CONFIG_FMAN_ENET +#define CONFIG_MII /* MII PHY management */ +#define CONFIG_ETHPRIME "FM1@DTSEC1" +#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ +#endif + +/* + * Environment + */ +#define CONFIG_LOADS_ECHO /* echo on for serial download */ +#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ELF +#define CONFIG_CMD_ERRATA +#define CONFIG_CMD_GREPENV +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SETEXPR + +#ifdef CONFIG_PCI +#define CONFIG_CMD_PCI +#define CONFIG_CMD_NET +#endif + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_CMDLINE_EDITING /* Command-line editing */ +#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ +#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ +#ifdef CONFIG_CMD_KGDB +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ +#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks*/ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 64 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ +#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ + +#ifdef CONFIG_CMD_KGDB +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* + * Environment Configuration + */ +#define CONFIG_ROOTPATH "/opt/nfsroot" +#define CONFIG_BOOTFILE "uImage" +#define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server*/ + +/* default location for tftp and bootm */ +#define CONFIG_LOADADDR 1000000 + +#define CONFIG_BOOTDELAY 10 /*-1 disables auto-boot*/ + +#define CONFIG_BAUDRATE 115200 + +#define __USB_PHY_TYPE utmi + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "hwconfig=fsl_ddr:ctlr_intlv=cacheline," \ + "bank_intlv=cs0_cs1;" \ + "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ + "netdev=eth0\0" \ + "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ + "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ + "tftpflash=tftpboot $loadaddr $uboot && " \ + "protect off $ubootaddr +$filesize && " \ + "erase $ubootaddr +$filesize && " \ + "cp.b $loadaddr $ubootaddr $filesize && " \ + "protect on $ubootaddr +$filesize && " \ + "cmp.b $loadaddr $ubootaddr $filesize\0" \ + "consoledev=ttyS0\0" \ + "ramdiskaddr=2000000\0" \ + "ramdiskfile=t1040rdb_pi/ramdisk.uboot\0" \ + "fdtaddr=c00000\0" \ + "fdtfile=t1040rdb_pi/t1040rdb_pi.dtb\0" \ + "bdev=sda3\0" \ + "c=ffe\0" + +#define CONFIG_LINUX \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "setenv ramdiskaddr 0x02000000;" \ + "setenv fdtaddr 0x00c00000;" \ + "setenv loadaddr 0x1000000;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + +#define CONFIG_HDBOOT \ + "setenv bootargs root=/dev/$bdev rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_NFSBOOTCOMMAND \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + +#define CONFIG_BOOTCOMMAND CONFIG_LINUX + +#ifdef CONFIG_SECURE_BOOT +#include <asm/fsl_secure_boot.h> +#endif + +#endif /* __CONFIG_H */ diff --git a/include/configs/T2080QDS.h b/include/configs/T2080QDS.h new file mode 100644 index 0000000000..ad09816974 --- /dev/null +++ b/include/configs/T2080QDS.h @@ -0,0 +1,805 @@ +/* + * Copyright 2011-2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* + * T2080 QDS board configuration file + */ + +#ifndef __T2080QDS_H +#define __T2080QDS_H + +#define CONFIG_T2080QDS +#define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */ +#define CONFIG_MMC +#define CONFIG_SPI_FLASH +#define CONFIG_USB_EHCI +#define CONFIG_FSL_SATA_V2 +#define CONFIG_SYS_SRIO /* Enable Serial RapidIO Support */ +#define CONFIG_SRIO1 /* SRIO port 1 */ +#define CONFIG_SRIO2 /* SRIO port 2 */ + +/* High Level Configuration Options */ +#define CONFIG_PHYS_64BIT +#define CONFIG_BOOKE +#define CONFIG_E500 /* BOOKE e500 family */ +#define CONFIG_E500MC /* BOOKE e500mc family */ +#define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ +#define CONFIG_MPC85xx /* MPC85xx/PQ3 platform */ +#define CONFIG_MP /* support multiple processors */ +#define CONFIG_ENABLE_36BIT_PHYS + +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_ADDR_MAP 1 +#define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ +#endif + +#define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ +#define CONFIG_SYS_NUM_CPC CONFIG_NUM_DDR_CONTROLLERS +#define CONFIG_FSL_IFC /* Enable IFC Support */ +#define CONFIG_FSL_LAW /* Use common FSL init code */ +#define CONFIG_ENV_OVERWRITE + +#ifdef CONFIG_RAMBOOT_PBL +#define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE +#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc +#define CONFIG_PBLPBI_CONFIG $(SRCTREE)/board/freescale/t2080qds/t2080_pbi.cfg +#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/t2080qds/t2080_rcw.cfg +#endif + +#define CONFIG_SRIO_PCIE_BOOT_MASTER +#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE +/* Set 1M boot space */ +#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000) +#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \ + (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR) +#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc +#define CONFIG_SYS_NO_FLASH +#endif + +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xeff80000 +#endif + +#ifndef CONFIG_RESET_VECTOR_ADDRESS +#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc +#endif + +/* + * These can be toggled for performance analysis, otherwise use default. + */ +#define CONFIG_SYS_CACHE_STASHING +#define CONFIG_BTB /* toggle branch predition */ +#define CONFIG_DDR_ECC +#ifdef CONFIG_DDR_ECC +#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER +#define CONFIG_MEM_INIT_VALUE 0xdeadbeef +#endif + +#ifdef CONFIG_SYS_NO_FLASH +#if !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) && !defined(CONFIG_RAMBOOT_PBL) +#define CONFIG_ENV_IS_NOWHERE +#endif +#else +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE +#endif + +#if defined(CONFIG_SPIFLASH) +#define CONFIG_SYS_EXTRA_ENV_RELOC +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_SPI_BUS 0 +#define CONFIG_ENV_SPI_CS 0 +#define CONFIG_ENV_SPI_MAX_HZ 10000000 +#define CONFIG_ENV_SPI_MODE 0 +#define CONFIG_ENV_SIZE 0x2000 /* 8KB */ +#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ +#define CONFIG_ENV_SECT_SIZE 0x10000 +#elif defined(CONFIG_SDCARD) +#define CONFIG_SYS_EXTRA_ENV_RELOC +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_OFFSET (512 * 1105) +#elif defined(CONFIG_NAND) +#define CONFIG_SYS_EXTRA_ENV_RELOC +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE +#define CONFIG_ENV_OFFSET (5 * CONFIG_SYS_NAND_BLOCK_SIZE) +#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) +#define CONFIG_ENV_IS_IN_REMOTE +#define CONFIG_ENV_ADDR 0xffe20000 +#define CONFIG_ENV_SIZE 0x2000 +#elif defined(CONFIG_ENV_IS_NOWHERE) +#define CONFIG_ENV_SIZE 0x2000 +#else +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ +#endif + +#ifndef __ASSEMBLY__ +unsigned long get_board_sys_clk(void); +unsigned long get_board_ddr_clk(void); +#endif + +#define CONFIG_SYS_CLK_FREQ get_board_sys_clk() +#define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() + +/* + * Config the L3 Cache as L3 SRAM + */ +#define CONFIG_SYS_INIT_L3_ADDR CONFIG_RAMBOOT_TEXT_BASE + +#define CONFIG_SYS_DCSRBAR 0xf0000000 +#define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull + +/* EEPROM */ +#define CONFIG_ID_EEPROM +#define CONFIG_SYS_I2C_EEPROM_NXID +#define CONFIG_SYS_EEPROM_BUS_NUM 0 +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 + +/* + * DDR Setup + */ +#define CONFIG_VERY_BIG_RAM +#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE +#define CONFIG_DIMM_SLOTS_PER_CTLR 1 +#define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR) +#define CONFIG_DDR_SPD +#define CONFIG_SYS_FSL_DDR3 +#define CONFIG_FSL_DDR_INTERACTIVE +#define CONFIG_SYS_SPD_BUS_NUM 0 +#define CONFIG_SYS_SDRAM_SIZE 2048 /* for fixed parameter use */ +#define SPD_EEPROM_ADDRESS1 0x51 +#define SPD_EEPROM_ADDRESS2 0x52 +#define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 +#define CTRL_INTLV_PREFERED cacheline + +/* + * IFC Definitions + */ +#define CONFIG_SYS_FLASH_BASE 0xe0000000 +#define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) +#define CONFIG_SYS_NOR0_CSPR_EXT (0xf) +#define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \ + + 0x8000000) | \ + CSPR_PORT_SIZE_16 | \ + CSPR_MSEL_NOR | \ + CSPR_V) +#define CONFIG_SYS_NOR1_CSPR_EXT (0xf) +#define CONFIG_SYS_NOR1_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ + CSPR_PORT_SIZE_16 | \ + CSPR_MSEL_NOR | \ + CSPR_V) +#define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) +/* NOR Flash Timing Params */ +#define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80 + +#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ + FTIM0_NOR_TEADC(0x5) | \ + FTIM0_NOR_TEAHC(0x5)) +#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ + FTIM1_NOR_TRAD_NOR(0x1A) |\ + FTIM1_NOR_TSEQRAD_NOR(0x13)) +#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ + FTIM2_NOR_TCH(0x4) | \ + FTIM2_NOR_TWPH(0x0E) | \ + FTIM2_NOR_TWP(0x1c)) +#define CONFIG_SYS_NOR_FTIM3 0x0 + +#define CONFIG_SYS_FLASH_QUIET_TEST +#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ + +#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ +#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ + +#define CONFIG_SYS_FLASH_EMPTY_INFO +#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS \ + + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS} + +#define CONFIG_FSL_QIXIS /* use common QIXIS code */ +#define QIXIS_BASE 0xffdf0000 +#define QIXIS_LBMAP_SWITCH 6 +#define QIXIS_LBMAP_MASK 0x0f +#define QIXIS_LBMAP_SHIFT 0 +#define QIXIS_LBMAP_DFLTBANK 0x00 +#define QIXIS_LBMAP_ALTBANK 0x04 +#define QIXIS_RST_CTL_RESET 0x83 +#define QIXIS_RST_FORCE_MEM 0x1 +#define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20 +#define QIXIS_RCFG_CTL_RECONFIG_START 0x21 +#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 +#define QIXIS_BASE_PHYS (0xf00000000ull | QIXIS_BASE) + +#define CONFIG_SYS_CSPR3_EXT (0xf) +#define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \ + | CSPR_PORT_SIZE_8 \ + | CSPR_MSEL_GPCM \ + | CSPR_V) +#define CONFIG_SYS_AMASK3 IFC_AMASK(4*1024) +#define CONFIG_SYS_CSOR3 0x0 +/* QIXIS Timing parameters for IFC CS3 */ +#define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ + FTIM0_GPCM_TEADC(0x0e) | \ + FTIM0_GPCM_TEAHC(0x0e)) +#define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0xff) | \ + FTIM1_GPCM_TRAD(0x3f)) +#define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ + FTIM2_GPCM_TCH(0x0) | \ + FTIM2_GPCM_TWP(0x1f)) +#define CONFIG_SYS_CS3_FTIM3 0x0 + +/* NAND Flash on IFC */ +#define CONFIG_NAND_FSL_IFC +#define CONFIG_SYS_NAND_BASE 0xff800000 +#define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE) + +#define CONFIG_SYS_NAND_CSPR_EXT (0xf) +#define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ + | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ + | CSPR_MSEL_NAND /* MSEL = NAND */ \ + | CSPR_V) +#define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) + +#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ + | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ + | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ + | CSOR_NAND_RAL_3 /* RAL = 2Byes */ \ + | CSOR_NAND_PGS_2K /* Page Size = 2K */\ + | CSOR_NAND_SPRZ_64 /* Spare size = 64 */\ + | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ + +#define CONFIG_SYS_NAND_ONFI_DETECTION + +/* ONFI NAND Flash mode0 Timing Params */ +#define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \ + FTIM0_NAND_TWP(0x18) | \ + FTIM0_NAND_TWCHT(0x07) | \ + FTIM0_NAND_TWH(0x0a)) +#define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ + FTIM1_NAND_TWBE(0x39) | \ + FTIM1_NAND_TRR(0x0e) | \ + FTIM1_NAND_TRP(0x18)) +#define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ + FTIM2_NAND_TREH(0x0a) | \ + FTIM2_NAND_TWHRE(0x1e)) +#define CONFIG_SYS_NAND_FTIM3 0x0 + +#define CONFIG_SYS_NAND_DDR_LAW 11 +#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_MTD_NAND_VERIFY_WRITE +#define CONFIG_CMD_NAND +#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) + +#if defined(CONFIG_NAND) +#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT +#define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR +#define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK +#define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR +#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 +#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 +#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 +#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 +#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR0_CSPR_EXT +#define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR0_CSPR +#define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK +#define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR +#define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0 +#define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1 +#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2 +#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3 +#else +#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT +#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR +#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK +#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR +#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 +#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 +#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 +#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 +#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NAND_CSPR_EXT +#define CONFIG_SYS_CSPR2 CONFIG_SYS_NAND_CSPR +#define CONFIG_SYS_AMASK2 CONFIG_SYS_NAND_AMASK +#define CONFIG_SYS_CSOR2 CONFIG_SYS_NAND_CSOR +#define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NAND_FTIM0 +#define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NAND_FTIM1 +#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NAND_FTIM2 +#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3 +#endif +#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR1_CSPR_EXT +#define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR1_CSPR +#define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK +#define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR +#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 +#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 +#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 +#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 + +#if defined(CONFIG_RAMBOOT_PBL) +#define CONFIG_SYS_RAMBOOT +#endif + +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE +#define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ +#define CONFIG_MISC_INIT_R +#define CONFIG_HWCONFIG + +/* define to use L1 as initial stack */ +#define CONFIG_L1_INIT_RAM +#define CONFIG_SYS_INIT_RAM_LOCK +#define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe0ec000 +/* The assembler doesn't like typecast */ +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ + ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ + CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) +#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET +#define CONFIG_SYS_MONITOR_LEN (512 * 1024) +#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) + +/* + * Serial Port + */ +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) +#define CONFIG_SYS_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} +#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) +#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) +#define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) +#define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) + +/* Use the HUSH parser */ +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " + +/* pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT +#define CONFIG_OF_BOARD_SETUP +#define CONFIG_OF_STDOUT_VIA_ALIAS + +/* new uImage format support */ +#define CONFIG_FIT +#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ + +/* + * I2C + */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_FSL +#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F +#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F +#define CONFIG_SYS_FSL_I2C3_SLAVE 0x7F +#define CONFIG_SYS_FSL_I2C4_SLAVE 0x7F +#define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 +#define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100 +#define CONFIG_SYS_FSL_I2C3_OFFSET 0x119000 +#define CONFIG_SYS_FSL_I2C4_OFFSET 0x119100 +#define CONFIG_SYS_FSL_I2C_SPEED 100000 +#define CONFIG_SYS_FSL_I2C2_SPEED 100000 +#define CONFIG_SYS_FSL_I2C3_SPEED 100000 +#define CONFIG_SYS_FSL_I2C4_SPEED 100000 +#define I2C_MUX_PCA_ADDR_PRI 0x77 /* I2C bus multiplexer,primary */ +#define I2C_MUX_PCA_ADDR_SEC1 0x75 /* I2C bus multiplexer,secondary 1 */ +#define I2C_MUX_PCA_ADDR_SEC2 0x76 /* I2C bus multiplexer,secondary 2 */ +#define I2C_MUX_CH_DEFAULT 0x8 + + +/* + * RapidIO + */ +#define CONFIG_SYS_SRIO1_MEM_VIRT 0xa0000000 +#define CONFIG_SYS_SRIO1_MEM_PHYS 0xc20000000ull +#define CONFIG_SYS_SRIO1_MEM_SIZE 0x10000000 /* 256M */ +#define CONFIG_SYS_SRIO2_MEM_VIRT 0xb0000000 +#define CONFIG_SYS_SRIO2_MEM_PHYS 0xc30000000ull +#define CONFIG_SYS_SRIO2_MEM_SIZE 0x10000000 /* 256M */ +/* + * for slave u-boot IMAGE instored in master memory space, + * PHYS must be aligned based on the SIZE + */ +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef080000ull +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff80000ull +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x80000 /* 512K */ +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff80000ull +/* + * for slave UCODE and ENV instored in master memory space, + * PHYS must be aligned based on the SIZE + */ +#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef040000ull +#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull +#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */ + +/* slave core release by master*/ +#define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4 +#define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */ + +/* + * SRIO_PCIE_BOOT - SLAVE + */ +#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE +#define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000 +#define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \ + (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR) +#endif + +/* + * eSPI - Enhanced SPI + */ +#ifdef CONFIG_SPI_FLASH +#define CONFIG_FSL_ESPI +#define CONFIG_SPI_FLASH_SST +#define CONFIG_SPI_FLASH_STMICRO +#define CONFIG_SPI_FLASH_SPANSION +#define CONFIG_CMD_SF +#define CONFIG_SF_DEFAULT_SPEED 10000000 +#define CONFIG_SF_DEFAULT_MODE 0 +#endif + +/* + * General PCI + * Memory space is mapped 1-1, but I/O space must start from 0. + */ +#define CONFIG_PCI /* Enable PCI/PCIE */ +#define CONFIG_PCIE1 /* PCIE controler 1 */ +#define CONFIG_PCIE2 /* PCIE controler 2 */ +#define CONFIG_PCIE3 /* PCIE controler 3 */ +#define CONFIG_PCIE4 /* PCIE controler 4 */ +#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ +#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ +/* controller 1, direct to uli, tgtid 3, Base address 20000 */ +#define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 +#define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 +#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull +#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ +#define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 +#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull +#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ + +/* controller 2, Slot 2, tgtid 2, Base address 201000 */ +#define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 +#define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 +#define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull +#define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000 /* 256M */ +#define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 +#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull +#define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ + +/* controller 3, Slot 1, tgtid 1, Base address 202000 */ +#define CONFIG_SYS_PCIE3_MEM_VIRT 0xb0000000 +#define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 +#define CONFIG_SYS_PCIE3_MEM_PHYS 0xc30000000ull +#define CONFIG_SYS_PCIE3_MEM_SIZE 0x10000000 /* 256M */ +#define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 +#define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull +#define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ + +/* controller 4, Base address 203000 */ +#define CONFIG_SYS_PCIE4_MEM_VIRT 0xc0000000 +#define CONFIG_SYS_PCIE4_MEM_BUS 0xe0000000 +#define CONFIG_SYS_PCIE4_MEM_PHYS 0xc40000000ull +#define CONFIG_SYS_PCIE4_MEM_SIZE 0x10000000 /* 256M */ +#define CONFIG_SYS_PCIE4_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull +#define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */ + +#ifdef CONFIG_PCI +#define CONFIG_PCI_INDIRECT_BRIDGE +#define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata LSZ ADD */ +#define CONFIG_NET_MULTI +#define CONFIG_E1000 +#define CONFIG_PCI_PNP /* do pci plug-and-play */ +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CONFIG_DOS_PARTITION +#endif + +/* Qman/Bman */ +#ifndef CONFIG_NOBQFMAN +#define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ +#define CONFIG_SYS_BMAN_NUM_PORTALS 18 +#define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 +#define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull +#define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 +#define CONFIG_SYS_QMAN_NUM_PORTALS 18 +#define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 +#define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull +#define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 + +#define CONFIG_SYS_DPAA_FMAN +#define CONFIG_SYS_DPAA_PME +#define CONFIG_SYS_PMAN +#define CONFIG_SYS_DPAA_DCE +#define CONFIG_SYS_DPAA_RMAN /* RMan */ +#define CONFIG_SYS_INTERLAKEN + +/* Default address of microcode for the Linux Fman driver */ +#if defined(CONFIG_SPIFLASH) +/* + * env is stored at 0x100000, sector size is 0x10000, ucode is stored after + * env, so we got 0x110000. + */ +#define CONFIG_SYS_QE_FW_IN_SPIFLASH +#define CONFIG_SYS_QE_FMAN_FW_ADDR 0x110000 +#elif defined(CONFIG_SDCARD) +/* + * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is + * about 545KB (1089 blocks), Env is stored after the image, and the env size is + * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130. + */ +#define CONFIG_SYS_QE_FMAN_FW_IN_MMC +#define CONFIG_SYS_QE_FMAN_FW_ADDR (512 * 1130) +#elif defined(CONFIG_NAND) +#define CONFIG_SYS_QE_FMAN_FW_IN_NAND +#define CONFIG_SYS_QE_FMAN_FW_ADDR (6 * CONFIG_SYS_NAND_BLOCK_SIZE) +#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) +/* + * Slave has no ucode locally, it can fetch this from remote. When implementing + * in two corenet boards, slave's ucode could be stored in master's memory + * space, the address can be mapped from slave TLB->slave LAW-> + * slave SRIO or PCIE outbound window->master inbound window-> + * master LAW->the ucode address in master's memory space. + */ +#define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE +#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xFFE00000 +#else +#define CONFIG_SYS_QE_FMAN_FW_IN_NOR +#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF40000 +#endif +#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 +#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) +#endif /* CONFIG_NOBQFMAN */ + +#ifdef CONFIG_SYS_DPAA_FMAN +#define CONFIG_FMAN_ENET +#define CONFIG_PHYLIB_10G +#define CONFIG_PHY_VITESSE +#define CONFIG_PHY_REALTEK +#define CONFIG_PHY_TERANETICS +#define RGMII_PHY1_ADDR 0x1 +#define RGMII_PHY2_ADDR 0x2 +#define FM1_10GEC1_PHY_ADDR 0x3 +#define SGMII_CARD_PORT1_PHY_ADDR 0x1C +#define SGMII_CARD_PORT2_PHY_ADDR 0x1D +#define SGMII_CARD_PORT3_PHY_ADDR 0x1E +#define SGMII_CARD_PORT4_PHY_ADDR 0x1F +#endif + +#ifdef CONFIG_FMAN_ENET +#define CONFIG_MII /* MII PHY management */ +#define CONFIG_ETHPRIME "FM1@DTSEC3" +#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ +#endif + +/* + * SATA + */ +#ifdef CONFIG_FSL_SATA_V2 +#define CONFIG_LIBATA +#define CONFIG_FSL_SATA +#define CONFIG_SYS_SATA_MAX_DEVICE 2 +#define CONFIG_SATA1 +#define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR +#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA +#define CONFIG_SATA2 +#define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR +#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA +#define CONFIG_LBA48 +#define CONFIG_CMD_SATA +#define CONFIG_DOS_PARTITION +#define CONFIG_CMD_EXT2 +#endif + +/* + * USB + */ +#ifdef CONFIG_USB_EHCI +#define CONFIG_CMD_USB +#define CONFIG_USB_STORAGE +#define CONFIG_USB_EHCI_FSL +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET +#define CONFIG_CMD_EXT2 +#define CONFIG_HAS_FSL_DR_USB +#endif + +/* + * SDHC + */ +#ifdef CONFIG_MMC +#define CONFIG_CMD_MMC +#define CONFIG_FSL_ESDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR +#define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT +#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 +#define CONFIG_GENERIC_MMC +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION +#endif + +/* + * Environment + */ +#define CONFIG_LOADS_ECHO /* echo on for serial download */ +#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ELF +#define CONFIG_CMD_ERRATA +#define CONFIG_CMD_GREPENV +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_SETEXPR +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_BDI + +#ifdef CONFIG_PCI +#define CONFIG_CMD_PCI +#define CONFIG_CMD_NET +#endif + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_CMDLINE_EDITING /* Command-line editing */ +#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ +#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ +#ifdef CONFIG_CMD_KGDB +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ +#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks*/ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 64 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ +#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ + +#ifdef CONFIG_CMD_KGDB +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* + * Environment Configuration + */ +#define CONFIG_ROOTPATH "/opt/nfsroot" +#define CONFIG_BOOTFILE "uImage" +#define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server */ + +/* default location for tftp and bootm */ +#define CONFIG_LOADADDR 1000000 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ +#define __USB_PHY_TYPE utmi + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "hwconfig=fsl_ddr:" \ + "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) "," \ + "bank_intlv=auto;" \ + "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ + "netdev=eth0\0" \ + "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ + "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ + "tftpflash=tftpboot $loadaddr $uboot && " \ + "protect off $ubootaddr +$filesize && " \ + "erase $ubootaddr +$filesize && " \ + "cp.b $loadaddr $ubootaddr $filesize && " \ + "protect on $ubootaddr +$filesize && " \ + "cmp.b $loadaddr $ubootaddr $filesize\0" \ + "consoledev=ttyS0\0" \ + "ramdiskaddr=2000000\0" \ + "ramdiskfile=t2080qds/ramdisk.uboot\0" \ + "fdtaddr=c00000\0" \ + "fdtfile=t2080qds/t2080qds.dtb\0" \ + "bdev=sda3\0" \ + "c=ffe\0" + +/* + * For emulation this causes u-boot to jump to the start of the + * proof point app code automatically + */ +#define CONFIG_PROOF_POINTS \ + "setenv bootargs root=/dev/$bdev rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "cpu 1 release 0x29000000 - - -;" \ + "cpu 2 release 0x29000000 - - -;" \ + "cpu 3 release 0x29000000 - - -;" \ + "cpu 4 release 0x29000000 - - -;" \ + "cpu 5 release 0x29000000 - - -;" \ + "cpu 6 release 0x29000000 - - -;" \ + "cpu 7 release 0x29000000 - - -;" \ + "go 0x29000000" + +#define CONFIG_HVBOOT \ + "setenv bootargs config-addr=0x60000000; " \ + "bootm 0x01000000 - 0x00f00000" + +#define CONFIG_ALU \ + "setenv bootargs root=/dev/$bdev rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "cpu 1 release 0x01000000 - - -;" \ + "cpu 2 release 0x01000000 - - -;" \ + "cpu 3 release 0x01000000 - - -;" \ + "cpu 4 release 0x01000000 - - -;" \ + "cpu 5 release 0x01000000 - - -;" \ + "cpu 6 release 0x01000000 - - -;" \ + "cpu 7 release 0x01000000 - - -;" \ + "go 0x01000000" + +#define CONFIG_LINUX \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "setenv ramdiskaddr 0x02000000;" \ + "setenv fdtaddr 0x00c00000;" \ + "setenv loadaddr 0x1000000;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + +#define CONFIG_HDBOOT \ + "setenv bootargs root=/dev/$bdev rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_NFSBOOTCOMMAND \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + +#define CONFIG_BOOTCOMMAND CONFIG_LINUX + +#ifdef CONFIG_SECURE_BOOT +#include <asm/fsl_secure_boot.h> +#undef CONFIG_CMD_USB +#endif + +#endif /* __T2080QDS_H */ diff --git a/include/configs/T4240QDS.h b/include/configs/T4240QDS.h index 3777ccb835..c96df54d99 100644 --- a/include/configs/T4240QDS.h +++ b/include/configs/T4240QDS.h @@ -229,6 +229,8 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_CMD_NAND #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) +#define CONFIG_SYS_NAND_MAX_OOBFREE 2 +#define CONFIG_SYS_NAND_MAX_ECCPOS 256 #if defined(CONFIG_NAND) #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT diff --git a/include/configs/alpr.h b/include/configs/alpr.h index 2bf1986e3a..61fdebac3f 100644 --- a/include/configs/alpr.h +++ b/include/configs/alpr.h @@ -324,6 +324,8 @@ #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE + 0, CONFIG_SYS_NAND_BASE + 2, \ CONFIG_SYS_NAND_BASE + 4, CONFIG_SYS_NAND_BASE + 6 } #define CONFIG_SYS_NAND_QUIET_TEST 1 /* don't warn upon unknown NAND flash */ +#define CONFIG_SYS_NAND_MAX_OOBFREE 2 +#define CONFIG_SYS_NAND_MAX_ECCPOS 56 /*----------------------------------------------------------------------- * External Bus Controller (EBC) Setup diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index e8a6ca15bb..8af4d6afba 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -182,7 +182,6 @@ #define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */ #define CONFIG_BAUDRATE 115200 -/* I2C Configuration */ #define CONFIG_CMD_EEPROM #define CONFIG_ENV_EEPROM_IS_ON_I2C #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */ @@ -224,6 +223,8 @@ #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds" #ifdef CONFIG_NAND +#define CONFIG_NAND_OMAP_GPMC +#define CONFIG_NAND_OMAP_ELM #define CONFIG_SYS_NAND_5_ADDR_CYCLE #define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ CONFIG_SYS_NAND_PAGE_SIZE) @@ -241,7 +242,8 @@ #define CONFIG_SYS_NAND_ECCSIZE 512 #define CONFIG_SYS_NAND_ECCBYTES 14 - +#define CONFIG_SYS_NAND_ONFI_DETECTION +#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 #endif diff --git a/include/configs/am335x_igep0033.h b/include/configs/am335x_igep0033.h index 2c69d4e30c..115d1b37c9 100644 --- a/include/configs/am335x_igep0033.h +++ b/include/configs/am335x_igep0033.h @@ -187,6 +187,7 @@ /* NAND support */ #define CONFIG_NAND #define CONFIG_NAND_OMAP_GPMC +#define CONFIG_NAND_OMAP_ELM #define GPMC_NAND_ECC_LP_x16_LAYOUT 1 #define CONFIG_SYS_NAND_BASE (0x08000000) /* phys address CS0 */ #define CONFIG_SYS_MAX_NAND_DEVICE 1 @@ -263,6 +264,7 @@ #define CONFIG_SYS_NAND_ECCSIZE 512 #define CONFIG_SYS_NAND_ECCBYTES 14 +#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h index c5e67bf87d..468fb43ea8 100644 --- a/include/configs/am3517_crane.h +++ b/include/configs/am3517_crane.h @@ -142,10 +142,10 @@ #undef CONFIG_CMD_IMLS /* List all found images */ #define CONFIG_SYS_NO_FLASH -#define CONFIG_HARD_I2C 1 -#define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_SYS_I2C_SLAVE 1 -#define CONFIG_DRIVER_OMAP34XX_I2C 1 +#define CONFIG_SYS_I2C +#define CONFIG_SYS_OMAP24_I2C_SPEED 100000 +#define CONFIG_SYS_OMAP24_I2C_SLAVE 1 +#define CONFIG_SYS_I2C_OMAP34XX #undef CONFIG_CMD_NET #undef CONFIG_CMD_NFS @@ -340,6 +340,7 @@ 10, 11, 12, 13} #define CONFIG_SYS_NAND_ECCSIZE 512 #define CONFIG_SYS_NAND_ECCBYTES 3 +#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h index 5e259f5c4e..1fa477aac8 100644 --- a/include/configs/am3517_evm.h +++ b/include/configs/am3517_evm.h @@ -136,10 +136,10 @@ #undef CONFIG_CMD_IMLS /* List all found images */ #define CONFIG_SYS_NO_FLASH -#define CONFIG_HARD_I2C 1 -#define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_SYS_I2C_SLAVE 1 -#define CONFIG_DRIVER_OMAP34XX_I2C 1 +#define CONFIG_SYS_I2C +#define CONFIG_SYS_OMAP24_I2C_SPEED 100000 +#define CONFIG_SYS_OMAP24_I2C_SLAVE 1 +#define CONFIG_SYS_I2C_OMAP34XX /* * Ethernet @@ -344,6 +344,7 @@ 10, 11, 12, 13} #define CONFIG_SYS_NAND_ECCSIZE 512 #define CONFIG_SYS_NAND_ECCBYTES 3 +#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 diff --git a/include/configs/bct-brettl2.h b/include/configs/bct-brettl2.h index ce09c2e138..5b09b45b56 100644 --- a/include/configs/bct-brettl2.h +++ b/include/configs/bct-brettl2.h @@ -111,8 +111,8 @@ * it linked after the configuration sector. */ # define LDS_BOARD_TEXT \ - arch/blackfin/lib/libblackfin.o (.text*); \ - arch/blackfin/cpu/libblackfin.o (.text*); \ + arch/blackfin/lib/built-in.o (.text*); \ + arch/blackfin/cpu/built-in.o (.text*); \ . = DEFINED(env_offset) ? env_offset : .; \ common/env_embedded.o (.text*); #endif diff --git a/include/configs/bf533-stamp.h b/include/configs/bf533-stamp.h index 7144c6319f..a22c868422 100644 --- a/include/configs/bf533-stamp.h +++ b/include/configs/bf533-stamp.h @@ -155,8 +155,8 @@ * it linked after the configuration sector. */ # define LDS_BOARD_TEXT \ - arch/blackfin/lib/libblackfin.o (.text*); \ - arch/blackfin/cpu/libblackfin.o (.text*); \ + arch/blackfin/lib/built-in.o (.text*); \ + arch/blackfin/cpu/built-in.o (.text*); \ . = DEFINED(env_offset) ? env_offset : .; \ common/env_embedded.o (.text*); #endif diff --git a/include/configs/bf537-pnav.h b/include/configs/bf537-pnav.h index 62bd3bf085..3aa3d50a89 100644 --- a/include/configs/bf537-pnav.h +++ b/include/configs/bf537-pnav.h @@ -111,8 +111,8 @@ * it linked after the configuration sector. */ # define LDS_BOARD_TEXT \ - arch/blackfin/lib/libblackfin.o (.text*); \ - arch/blackfin/cpu/libblackfin.o (.text*); \ + arch/blackfin/lib/built-in.o (.text*); \ + arch/blackfin/cpu/built-in.o (.text*); \ . = DEFINED(env_offset) ? env_offset : .; \ common/env_embedded.o (.text*); #endif diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h index 25cebf880f..02945bee79 100644 --- a/include/configs/bf537-stamp.h +++ b/include/configs/bf537-stamp.h @@ -118,8 +118,8 @@ * it linked after the configuration sector. */ # define LDS_BOARD_TEXT \ - arch/blackfin/lib/libblackfin.o (.text*); \ - arch/blackfin/cpu/libblackfin.o (.text*); \ + arch/blackfin/lib/built-in.o (.text*); \ + arch/blackfin/cpu/built-in.o (.text*); \ . = DEFINED(env_offset) ? env_offset : .; \ common/env_embedded.o (.text*); #endif diff --git a/include/configs/bf538f-ezkit.h b/include/configs/bf538f-ezkit.h index 77822e792f..ffb0caf947 100644 --- a/include/configs/bf538f-ezkit.h +++ b/include/configs/bf538f-ezkit.h @@ -115,8 +115,8 @@ * it linked after the configuration sector. */ # define LDS_BOARD_TEXT \ - arch/blackfin/lib/libblackfin.o (.text*); \ - arch/blackfin/cpu/libblackfin.o (.text*); \ + arch/blackfin/lib/built-in.o (.text*); \ + arch/blackfin/cpu/built-in.o (.text*); \ . = DEFINED(env_offset) ? env_offset : .; \ common/env_embedded.o (.text*); #endif diff --git a/include/configs/cm-bf537e.h b/include/configs/cm-bf537e.h index 77f47d9457..8f10eba467 100644 --- a/include/configs/cm-bf537e.h +++ b/include/configs/cm-bf537e.h @@ -112,8 +112,8 @@ * it linked after the configuration sector. */ # define LDS_BOARD_TEXT \ - arch/blackfin/lib/libblackfin.o (.text*); \ - arch/blackfin/cpu/libblackfin.o (.text*); \ + arch/blackfin/lib/built-in.o (.text*); \ + arch/blackfin/cpu/built-in.o (.text*); \ . = DEFINED(env_offset) ? env_offset : .; \ common/env_embedded.o (.text*); #endif diff --git a/include/configs/cm-bf537u.h b/include/configs/cm-bf537u.h index 55e61d674f..a1c8e8a856 100644 --- a/include/configs/cm-bf537u.h +++ b/include/configs/cm-bf537u.h @@ -110,8 +110,8 @@ * it linked after the configuration sector. */ # define LDS_BOARD_TEXT \ - arch/blackfin/lib/libblackfin.o (.text*); \ - arch/blackfin/cpu/libblackfin.o (.text*); \ + arch/blackfin/lib/built-in.o (.text*); \ + arch/blackfin/cpu/built-in.o (.text*); \ . = DEFINED(env_offset) ? env_offset : .; \ common/env_embedded.o (.text*); #endif diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h index a490fc3dc7..e72187e30b 100644 --- a/include/configs/cm_t35.h +++ b/include/configs/cm_t35.h @@ -141,10 +141,10 @@ #undef CONFIG_CMD_IMLS /* List all found images */ #define CONFIG_SYS_NO_FLASH -#define CONFIG_HARD_I2C -#define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_SYS_I2C_SLAVE 1 -#define CONFIG_DRIVER_OMAP34XX_I2C +#define CONFIG_SYS_I2C +#define CONFIG_SYS_OMAP24_I2C_SPEED 100000 +#define CONFIG_SYS_OMAP24_I2C_SLAVE 1 +#define CONFIG_SYS_I2C_OMAP34XX #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 #define CONFIG_I2C_MULTI_BUS @@ -326,5 +326,8 @@ #define CONFIG_SPLASH_SCREEN #define CONFIG_CMD_BMP #define CONFIG_BMP_16BPP +#define CONFIG_SCF0403_LCD + +#define CONFIG_OMAP3_SPI #endif /* __CONFIG_H */ diff --git a/include/configs/controlcenterd.h b/include/configs/controlcenterd.h index 413f0867f4..46d4f9865f 100644 --- a/include/configs/controlcenterd.h +++ b/include/configs/controlcenterd.h @@ -138,7 +138,7 @@ #define CONFIG_SYS_SDRAM_SIZE 1024 #define CONFIG_VERY_BIG_RAM -#define CONFIG_FSL_DDR3 +#define CONFIG_SYS_FSL_DDR3 #define CONFIG_NUM_DDR_CONTROLLERS 1 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 #define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h index 562caa5845..665295c1a2 100644 --- a/include/configs/corenet_ds.h +++ b/include/configs/corenet_ds.h @@ -173,7 +173,7 @@ #define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR) #define CONFIG_DDR_SPD -#define CONFIG_FSL_DDR3 +#define CONFIG_SYS_FSL_DDR3 #define CONFIG_SYS_SPD_BUS_NUM 1 #define SPD_EEPROM_ADDRESS1 0x51 diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h index 8343891cb8..4f43ba9882 100644 --- a/include/configs/devkit8000.h +++ b/include/configs/devkit8000.h @@ -90,10 +90,10 @@ #define CONFIG_DOS_PARTITION 1 /* I2C */ -#define CONFIG_HARD_I2C 1 -#define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_SYS_I2C_SLAVE 1 -#define CONFIG_DRIVER_OMAP34XX_I2C 1 +#define CONFIG_SYS_I2C +#define CONFIG_SYS_OMAP24_I2C_SPEED 100000 +#define CONFIG_SYS_OMAP24_I2C_SLAVE 1 +#define CONFIG_SYS_I2C_OMAP34XX /* TWL4030 */ #define CONFIG_TWL4030_POWER 1 @@ -327,6 +327,7 @@ #define CONFIG_SYS_NAND_ECCSIZE 512 #define CONFIG_SYS_NAND_ECCBYTES 3 +#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE diff --git a/include/configs/dig297.h b/include/configs/dig297.h index c19c4c7549..5049afca7a 100644 --- a/include/configs/dig297.h +++ b/include/configs/dig297.h @@ -123,10 +123,10 @@ #undef CONFIG_CMD_NFS /* NFS support */ #define CONFIG_SYS_NO_FLASH -#define CONFIG_HARD_I2C -#define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_SYS_I2C_SLAVE 1 -#define CONFIG_DRIVER_OMAP34XX_I2C 1 +#define CONFIG_SYS_I2C +#define CONFIG_SYS_OMAP24_I2C_SPEED 100000 +#define CONFIG_SYS_OMAP24_I2C_SLAVE 1 +#define CONFIG_SYS_I2C_OMAP34XX /* * TWL4030 diff --git a/include/configs/dnp5370.h b/include/configs/dnp5370.h index f2f41028eb..d0e72e3e13 100644 --- a/include/configs/dnp5370.h +++ b/include/configs/dnp5370.h @@ -85,8 +85,8 @@ #define ENV_IS_EMBEDDED #define LDS_BOARD_TEXT \ - arch/blackfin/lib/libblackfin.o (.text*); \ - arch/blackfin/cpu/libblackfin.o (.text*); \ + arch/blackfin/lib/built-in.o (.text*); \ + arch/blackfin/cpu/built-in.o (.text*); \ . = DEFINED(env_offset) ? env_offset : .; \ common/env_embedded.o (.text*); diff --git a/include/configs/ecovec.h b/include/configs/ecovec.h index 335e9cdffa..3483cf1f58 100644 --- a/include/configs/ecovec.h +++ b/include/configs/ecovec.h @@ -58,18 +58,17 @@ /* I2C */ #define CONFIG_CMD_I2C -#define CONFIG_SH_I2C 1 -#define CONFIG_HARD_I2C 1 -#define CONFIG_I2C_MULTI_BUS 1 -#define CONFIG_SYS_MAX_I2C_BUS 2 -#define CONFIG_SYS_I2C_MODULE 1 -#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_SH #define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C_SH_NUM_CONTROLLERS 2 +#define CONFIG_SYS_I2C_SH_BASE0 0xA4470000 +#define CONFIG_SYS_I2C_SH_SPEED0 100000 +#define CONFIG_SYS_I2C_SH_BASE1 0xA4750000 +#define CONFIG_SYS_I2C_SH_SPEED1 100000 #define CONFIG_SH_I2C_DATA_HIGH 4 #define CONFIG_SH_I2C_DATA_LOW 5 #define CONFIG_SH_I2C_CLOCK 41666666 -#define CONFIG_SH_I2C_BASE0 0xA4470000 -#define CONFIG_SH_I2C_BASE1 0xA4750000 /* Ether */ #define CONFIG_SH_ETHER 1 diff --git a/include/configs/highbank.h b/include/configs/highbank.h index b86eb430a1..7dbee3cdb9 100644 --- a/include/configs/highbank.h +++ b/include/configs/highbank.h @@ -8,7 +8,6 @@ #define __CONFIG_H #define CONFIG_SYS_DCACHE_OFF -#define CONFIG_L2_OFF #define CONFIG_SYS_THUMB_BUILD #define CONFIG_SYS_NO_FLASH diff --git a/include/configs/ibf-dsp561.h b/include/configs/ibf-dsp561.h index 5291755121..ac5ca9af37 100644 --- a/include/configs/ibf-dsp561.h +++ b/include/configs/ibf-dsp561.h @@ -95,8 +95,8 @@ * it linked after the configuration sector. */ # define LDS_BOARD_TEXT \ - arch/blackfin/lib/libblackfin.o (.text*); \ - arch/blackfin/cpu/libblackfin.o (.text*); \ + arch/blackfin/lib/built-in.o (.text*); \ + arch/blackfin/cpu/built-in.o (.text*); \ . = DEFINED(env_offset) ? env_offset : .; \ common/env_embedded.o (.text*); #endif diff --git a/include/configs/km/kmp204x-common.h b/include/configs/km/kmp204x-common.h index 2d5320b5cd..7700b38c2d 100644 --- a/include/configs/km/kmp204x-common.h +++ b/include/configs/km/kmp204x-common.h @@ -111,7 +111,7 @@ unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR) #define CONFIG_DDR_SPD -#define CONFIG_FSL_DDR3 +#define CONFIG_SYS_FSL_DDR3 #define CONFIG_FSL_DDR_INTERACTIVE #define CONFIG_SYS_SPD_BUS_NUM 0 diff --git a/include/configs/kzm9g.h b/include/configs/kzm9g.h index 1afd487932..f183279ba8 100644 --- a/include/configs/kzm9g.h +++ b/include/configs/kzm9g.h @@ -22,7 +22,6 @@ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO #define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_L2_OFF #define CONFIG_OF_LIBFDT #include <config_cmd_default.h> @@ -139,21 +138,22 @@ /* I2C */ #define CONFIG_CMD_I2C -#define CONFIG_SH_I2C 1 +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_SH +#define CONFIG_SYS_I2C_SH_NUM_CONTROLLERS 5 +#define CONFIG_SYS_I2C_SH_BASE0 0xE6820000 +#define CONFIG_SYS_I2C_SH_SPEED0 100000 +#define CONFIG_SYS_I2C_SH_BASE1 0xE6822000 +#define CONFIG_SYS_I2C_SH_SPEED1 100000 +#define CONFIG_SYS_I2C_SH_BASE2 0xE6824000 +#define CONFIG_SYS_I2C_SH_SPEED2 100000 +#define CONFIG_SYS_I2C_SH_BASE3 0xE6826000 +#define CONFIG_SYS_I2C_SH_SPEED3 100000 +#define CONFIG_SYS_I2C_SH_BASE4 0xE6828000 +#define CONFIG_SYS_I2C_SH_SPEED4 100000 #define CONFIG_SH_I2C_8BIT -#define CONFIG_HARD_I2C -#define CONFIG_I2C_MULTI_BUS -#define CONFIG_SYS_MAX_I2C_BUS (5) -#define CONFIG_SYS_I2C_MODULE -#define CONFIG_SYS_I2C_SPEED (100000) /* 100 kHz */ -#define CONFIG_SYS_I2C_SLAVE (0x7F) -#define CONFIG_SH_I2C_DATA_HIGH (4) -#define CONFIG_SH_I2C_DATA_LOW (5) -#define CONFIG_SH_I2C_CLOCK (104000000) /* 104 MHz */ -#define CONFIG_SH_I2C_BASE0 (0xE6820000) -#define CONFIG_SH_I2C_BASE1 (0xE6822000) -#define CONFIG_SH_I2C_BASE2 (0xE6824000) -#define CONFIG_SH_I2C_BASE3 (0xE6826000) -#define CONFIG_SH_I2C_BASE4 (0xE6828000) +#define CONFIG_SH_I2C_DATA_HIGH 4 +#define CONFIG_SH_I2C_DATA_LOW 5 +#define CONFIG_SH_I2C_CLOCK 104000000 /* 104 MHz */ #endif /* __KZM9G_H */ diff --git a/include/configs/qemu-malta.h b/include/configs/malta.h index 03514d165b..cc574ed040 100644 --- a/include/configs/qemu-malta.h +++ b/include/configs/malta.h @@ -4,8 +4,8 @@ * SPDX-License-Identifier: GPL-2.0 */ -#ifndef _QEMU_MALTA_CONFIG_H -#define _QEMU_MALTA_CONFIG_H +#ifndef _MALTA_CONFIG_H +#define _MALTA_CONFIG_H #include <asm/addrspace.h> #include <asm/malta.h> @@ -13,12 +13,21 @@ /* * System configuration */ -#define CONFIG_QEMU_MALTA +#define CONFIG_MALTA + +#define CONFIG_MEMSIZE_IN_BYTES #define CONFIG_PCI #define CONFIG_PCI_GT64120 +#define CONFIG_PCI_MSC01 #define CONFIG_PCI_PNP #define CONFIG_PCNET +#define CONFIG_PCNET_79C973 +#define PCNET_HAS_PROM + +#define CONFIG_MISC_INIT_R +#define CONFIG_RTC_MC146818 +#define CONFIG_SYS_ISA_IO_BASE_ADDRESS 0 /* * CPU Configuration @@ -26,17 +35,13 @@ #define CONFIG_SYS_MHZ 250 /* arbitrary value */ #define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000) -#define CONFIG_SYS_DCACHE_SIZE 16384 /* arbitrary value */ -#define CONFIG_SYS_ICACHE_SIZE 16384 /* arbitrary value */ -#define CONFIG_SYS_CACHELINE_SIZE 32 /* arbitrary value */ - #define CONFIG_SWAP_IO_SPACE /* * Memory map */ -#define CONFIG_SYS_TEXT_BASE 0xbfc00000 /* Rom version */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_TEXT_BASE 0xbe000000 /* Rom version */ +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_SDRAM_BASE 0x80000000 /* Cached addr */ #define CONFIG_SYS_MEM_SIZE (256 * 1024 * 1024) @@ -49,14 +54,15 @@ #define CONFIG_SYS_MALLOC_LEN (128 * 1024) #define CONFIG_SYS_BOOTPARAMS_LEN (128 * 1024) +#define CONFIG_SYS_BOOTM_LEN (64 * 1024 * 1024) /* * Console configuration */ #if defined(CONFIG_SYS_LITTLE_ENDIAN) -#define CONFIG_SYS_PROMPT "qemu-maltael # " +#define CONFIG_SYS_PROMPT "maltael # " #else -#define CONFIG_SYS_PROMPT "qemu-malta # " +#define CONFIG_SYS_PROMPT "malta # " #endif #define CONFIG_SYS_CBSIZE 256 @@ -75,17 +81,12 @@ #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK 115200 -#define CONFIG_SYS_NS16550_COM1 CKSEG1ADDR(MALTA_UART_BASE) +#define CONFIG_SYS_NS16550_CLK (115200 * 16) +#define CONFIG_SYS_NS16550_COM1 CKSEG1ADDR(MALTA_GT_UART0_BASE) +#define CONFIG_SYS_NS16550_COM2 CKSEG1ADDR(MALTA_MSC01_UART0_BASE) #define CONFIG_CONS_INDEX 1 /* - * Environment - */ -#define CONFIG_ENV_IS_NOWHERE -#define CONFIG_ENV_SIZE 0x10000 - -/* * Flash configuration */ #define CONFIG_SYS_FLASH_BASE (KSEG1 | MALTA_FLASH_BASE) @@ -96,6 +97,15 @@ #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* + * Environment + */ +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_SECT_SIZE 0x20000 +#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE +#define CONFIG_ENV_ADDR \ + (CONFIG_SYS_FLASH_BASE + (4 << 20) - CONFIG_ENV_SIZE) + +/* * Commands */ #include <config_cmd_default.h> @@ -105,9 +115,11 @@ #undef CONFIG_CMD_LOADS #undef CONFIG_CMD_NFS +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP #define CONFIG_CMD_PCI #define CONFIG_CMD_PING #define CONFIG_SYS_LONGHELP /* verbose help, undef to save memory */ -#endif /* _QEMU_MALTA_CONFIG_H */ +#endif /* _MALTA_CONFIG_H */ diff --git a/include/configs/mcx.h b/include/configs/mcx.h index 4619dfb3e4..dcd29ce7cb 100644 --- a/include/configs/mcx.h +++ b/include/configs/mcx.h @@ -137,10 +137,10 @@ #undef CONFIG_CMD_IMLS /* List all found images */ #define CONFIG_SYS_NO_FLASH -#define CONFIG_HARD_I2C -#define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_SYS_I2C_SLAVE 1 -#define CONFIG_DRIVER_OMAP34XX_I2C +#define CONFIG_SYS_I2C +#define CONFIG_SYS_OMAP24_I2C_SPEED 100000 +#define CONFIG_SYS_OMAP24_I2C_SLAVE 1 +#define CONFIG_SYS_I2C_OMAP34XX /* RTC */ #define CONFIG_RTC_DS1337 @@ -353,7 +353,6 @@ #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_NAND_SIMPLE -#define CONFIG_SPL_NAND_SOFTECC #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_LIBDISK_SUPPORT @@ -395,6 +394,7 @@ 56, 57, 58, 59, 60, 61, 62, 63} #define CONFIG_SYS_NAND_ECCSIZE 256 #define CONFIG_SYS_NAND_ECCBYTES 3 +#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_SW #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE diff --git a/include/configs/mpq101.h b/include/configs/mpq101.h index 6d0d392b77..ec09e15dbf 100644 --- a/include/configs/mpq101.h +++ b/include/configs/mpq101.h @@ -52,7 +52,7 @@ #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR /* DDR Setup */ -#define CONFIG_FSL_DDR2 +#define CONFIG_SYS_FSL_DDR2 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ diff --git a/include/configs/mx51_efikamx.h b/include/configs/mx51_efikamx.h index 8a44ef5a74..0f2a4ef973 100644 --- a/include/configs/mx51_efikamx.h +++ b/include/configs/mx51_efikamx.h @@ -29,7 +29,6 @@ #define CONFIG_SYS_TEXT_BASE 0x97800000 -#define CONFIG_L2_OFF #define CONFIG_SYS_ICACHE_OFF #define CONFIG_SYS_DCACHE_OFF diff --git a/include/configs/nokia_rx51.h b/include/configs/nokia_rx51.h index 4332779d25..e0c0fac8e1 100644 --- a/include/configs/nokia_rx51.h +++ b/include/configs/nokia_rx51.h @@ -157,10 +157,10 @@ #undef CONFIG_CMD_SETGETDCR /* DCR support on 4xx */ #define CONFIG_OMAP3_SPI -#define CONFIG_HARD_I2C -#define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_SYS_I2C_SLAVE 1 -#define CONFIG_DRIVER_OMAP34XX_I2C +#define CONFIG_SYS_I2C +#define CONFIG_SYS_OMAP24_I2C_SPEED 100000 +#define CONFIG_SYS_OMAP24_I2C_SLAVE 1 +#define CONFIG_SYS_I2C_OMAP34XX /* * TWL4030 diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index c662cc03de..3acb8543f8 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -158,11 +158,10 @@ #undef CONFIG_CMD_IMLS /* List all found images */ #define CONFIG_SYS_NO_FLASH -#define CONFIG_HARD_I2C 1 -#define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_SYS_I2C_SLAVE 1 -#define CONFIG_I2C_MULTI_BUS 1 -#define CONFIG_DRIVER_OMAP34XX_I2C 1 +#define CONFIG_SYS_I2C +#define CONFIG_SYS_OMAP24_I2C_SPEED 100000 +#define CONFIG_SYS_OMAP24_I2C_SLAVE 1 +#define CONFIG_SYS_I2C_OMAP34XX #define CONFIG_VIDEO_OMAP3 /* DSS Support */ /* @@ -429,6 +428,7 @@ 10, 11, 12, 13} #define CONFIG_SYS_NAND_ECCSIZE 512 #define CONFIG_SYS_NAND_ECCBYTES 3 +#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index 3ace8bb6e5..b7638fb8a6 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -107,6 +107,7 @@ 10, 11, 12, 13} #define CONFIG_SYS_NAND_ECCSIZE 512 #define CONFIG_SYS_NAND_ECCBYTES 3 +#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 diff --git a/include/configs/omap3_evm_common.h b/include/configs/omap3_evm_common.h index 3eae28884c..43616e2b02 100644 --- a/include/configs/omap3_evm_common.h +++ b/include/configs/omap3_evm_common.h @@ -87,11 +87,10 @@ /* * I2C */ -#define CONFIG_HARD_I2C -#define CONFIG_DRIVER_OMAP34XX_I2C - -#define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_SYS_I2C_SLAVE 1 +#define CONFIG_SYS_I2C +#define CONFIG_SYS_OMAP24_I2C_SPEED 100000 +#define CONFIG_SYS_OMAP24_I2C_SLAVE 1 +#define CONFIG_SYS_I2C_OMAP34XX /* * PISMO support diff --git a/include/configs/omap3_evm_quick_nand.h b/include/configs/omap3_evm_quick_nand.h index 9ecd70d55b..4427e88b7e 100644 --- a/include/configs/omap3_evm_quick_nand.h +++ b/include/configs/omap3_evm_quick_nand.h @@ -86,6 +86,7 @@ 10, 11, 12, 13} #define CONFIG_SYS_NAND_ECCSIZE 512 #define CONFIG_SYS_NAND_ECCBYTES 3 +#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h index ac36ac6950..71062a601f 100644 --- a/include/configs/omap3_igep00x0.h +++ b/include/configs/omap3_igep00x0.h @@ -124,10 +124,10 @@ #undef CONFIG_CMD_IMLS /* List all found images */ #define CONFIG_SYS_NO_FLASH -#define CONFIG_HARD_I2C 1 -#define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_SYS_I2C_SLAVE 1 -#define CONFIG_DRIVER_OMAP34XX_I2C 1 +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_OMAP34XX +#define CONFIG_SYS_OMAP24_I2C_SPEED 100000 +#define CONFIG_SYS_OMAP24_I2C_SLAVE 1 /* * TWL4030 @@ -362,6 +362,7 @@ 10, 11, 12, 13} #define CONFIG_SYS_NAND_ECCSIZE 512 #define CONFIG_SYS_NAND_ECCBYTES 3 +#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 #endif diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h index 0c096f429f..bedd6f9cb3 100644 --- a/include/configs/omap3_logic.h +++ b/include/configs/omap3_logic.h @@ -118,12 +118,10 @@ /* * I2C */ -#define CONFIG_HARD_I2C -#define CONFIG_DRIVER_OMAP34XX_I2C - -#define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_SYS_I2C_SLAVE 1 -#define CONFIG_I2C_MULTI_BUS +#define CONFIG_SYS_I2C +#define CONFIG_SYS_OMAP24_I2C_SPEED 100000 +#define CONFIG_SYS_OMAP24_I2C_SLAVE 1 +#define CONFIG_SYS_I2C_OMAP34XX /* * TWL4030 diff --git a/include/configs/omap3_mvblx.h b/include/configs/omap3_mvblx.h index 45da2e00b2..8d11010f84 100644 --- a/include/configs/omap3_mvblx.h +++ b/include/configs/omap3_mvblx.h @@ -128,11 +128,10 @@ #define CONFIG_CMD_PING #define CONFIG_CMD_FPGA -#define CONFIG_HARD_I2C 1 -#define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_SYS_I2C_SLAVE 0 -#define CONFIG_DRIVER_OMAP34XX_I2C 1 -#define CONFIG_I2C_MULTI_BUS 1 +#define CONFIG_SYS_I2C +#define CONFIG_SYS_OMAP24_I2C_SPEED 100000 +#define CONFIG_SYS_OMAP24_I2C_SLAVE 1 +#define CONFIG_SYS_I2C_OMAP34XX /* * TWL4030 diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h index 46416946c7..e0f026269f 100644 --- a/include/configs/omap3_overo.h +++ b/include/configs/omap3_overo.h @@ -98,11 +98,10 @@ #define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ #define CONFIG_SYS_NO_FLASH -#define CONFIG_HARD_I2C -#define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_SYS_I2C_SLAVE 1 -#define CONFIG_I2C_MULTI_BUS -#define CONFIG_DRIVER_OMAP34XX_I2C +#define CONFIG_SYS_I2C +#define CONFIG_SYS_OMAP24_I2C_SPEED 100000 +#define CONFIG_SYS_OMAP24_I2C_SLAVE 1 +#define CONFIG_SYS_I2C_OMAP34XX /* * TWL4030 @@ -325,6 +324,7 @@ 10, 11, 12, 13} #define CONFIG_SYS_NAND_ECCSIZE 512 #define CONFIG_SYS_NAND_ECCBYTES 3 +#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h index 3cce0de48d..eacdfaaa53 100644 --- a/include/configs/omap3_pandora.h +++ b/include/configs/omap3_pandora.h @@ -111,10 +111,10 @@ #undef CONFIG_CMD_NFS /* NFS support */ #define CONFIG_SYS_NO_FLASH -#define CONFIG_HARD_I2C 1 -#define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_SYS_I2C_SLAVE 1 -#define CONFIG_DRIVER_OMAP34XX_I2C 1 +#define CONFIG_SYS_I2C +#define CONFIG_SYS_OMAP24_I2C_SPEED 100000 +#define CONFIG_SYS_OMAP24_I2C_SLAVE 1 +#define CONFIG_SYS_I2C_OMAP34XX /* * TWL4030 diff --git a/include/configs/omap3_sdp3430.h b/include/configs/omap3_sdp3430.h index 697a3f386c..6f1304dc94 100644 --- a/include/configs/omap3_sdp3430.h +++ b/include/configs/omap3_sdp3430.h @@ -114,10 +114,10 @@ /* * I2C for power management setup */ -#define CONFIG_HARD_I2C 1 -#define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_SYS_I2C_SLAVE 1 -#define CONFIG_DRIVER_OMAP34XX_I2C 1 +#define CONFIG_SYS_I2C +#define CONFIG_SYS_OMAP24_I2C_SPEED 100000 +#define CONFIG_SYS_OMAP24_I2C_SLAVE 1 +#define CONFIG_SYS_I2C_OMAP34XX /* OMITTED: single 1 Gbit MT29F1G NAND flash */ diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h index 8591f98a8a..1dd53fa133 100644 --- a/include/configs/omap3_zoom1.h +++ b/include/configs/omap3_zoom1.h @@ -118,10 +118,10 @@ #undef CONFIG_CMD_NFS /* NFS support */ #define CONFIG_SYS_NO_FLASH -#define CONFIG_HARD_I2C 1 -#define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_SYS_I2C_SLAVE 1 -#define CONFIG_DRIVER_OMAP34XX_I2C 1 +#define CONFIG_SYS_I2C +#define CONFIG_SYS_OMAP24_I2C_SPEED 100000 +#define CONFIG_SYS_OMAP24_I2C_SLAVE 1 +#define CONFIG_SYS_I2C_OMAP34XX /* * TWL4030 diff --git a/include/configs/omap3_zoom2.h b/include/configs/omap3_zoom2.h index cb8c7ec6f0..f749740815 100644 --- a/include/configs/omap3_zoom2.h +++ b/include/configs/omap3_zoom2.h @@ -138,10 +138,10 @@ #undef CONFIG_CMD_NFS /* NFS support */ #define CONFIG_SYS_NO_FLASH -#define CONFIG_HARD_I2C 1 -#define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_SYS_I2C_SLAVE 1 -#define CONFIG_DRIVER_OMAP34XX_I2C 1 +#define CONFIG_SYS_I2C +#define CONFIG_SYS_OMAP24_I2C_SPEED 100000 +#define CONFIG_SYS_OMAP24_I2C_SLAVE 1 +#define CONFIG_SYS_I2C_OMAP34XX /* * TWL4030 diff --git a/include/configs/origen.h b/include/configs/origen.h index bad34b3e71..f46b833b53 100644 --- a/include/configs/origen.h +++ b/include/configs/origen.h @@ -22,8 +22,6 @@ #define CONFIG_DISPLAY_BOARDINFO #define CONFIG_BOARD_EARLY_INIT_F -/* Keep L2 Cache Disabled */ -#define CONFIG_L2_OFF 1 #define CONFIG_SYS_DCACHE_OFF 1 #define CONFIG_SYS_SDRAM_BASE 0x40000000 diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h index 91a678212d..57ed019952 100644 --- a/include/configs/p1_p2_rdb_pc.h +++ b/include/configs/p1_p2_rdb_pc.h @@ -325,7 +325,7 @@ #endif /* DDR Setup */ -#define CONFIG_FSL_DDR3 +#define CONFIG_SYS_FSL_DDR3 #define CONFIG_SYS_DDR_RAW_TIMING #define CONFIG_DDR_SPD #define CONFIG_SYS_SPD_BUS_NUM 1 diff --git a/include/configs/p1_twr.h b/include/configs/p1_twr.h index 76189e136f..9837100e31 100644 --- a/include/configs/p1_twr.h +++ b/include/configs/p1_twr.h @@ -89,7 +89,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR /* DDR Setup */ -#define CONFIG_FSL_DDR3 +#define CONFIG_SYS_FSL_DDR3 #define CONFIG_SYS_SDRAM_SIZE_LAW LAW_SIZE_512M #define CONFIG_CHIP_SELECTS_PER_CTRL 1 diff --git a/include/configs/pcm051.h b/include/configs/pcm051.h index 4970b13e96..6f41ee7718 100644 --- a/include/configs/pcm051.h +++ b/include/configs/pcm051.h @@ -172,11 +172,10 @@ /* I2C Configuration */ #define CONFIG_I2C #define CONFIG_CMD_I2C -#define CONFIG_HARD_I2C -#define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_SYS_I2C_SLAVE 1 -#define CONFIG_I2C_MULTI_BUS -#define CONFIG_DRIVER_OMAP24XX_I2C +#define CONFIG_SYS_I2C +#define CONFIG_SYS_OMAP24_I2C_SPEED 100000 +#define CONFIG_SYS_OMAP24_I2C_SLAVE 1 +#define CONFIG_SYS_I2C_OMAP24XX #define CONFIG_CMD_EEPROM #define CONFIG_ENV_EEPROM_IS_ON_I2C #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */ diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h index 0884ad3a02..a4edc624bc 100644 --- a/include/configs/sandbox.h +++ b/include/configs/sandbox.h @@ -75,7 +75,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x00000000 #define CONFIG_SYS_MEMTEST_START 0x00100000 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x1000) -#define CONFIG_PHYS_64BIT #define CONFIG_SYS_FDT_LOAD_ADDR 0x1000000 /* Size of our emulated memory */ diff --git a/include/configs/sbc8548.h b/include/configs/sbc8548.h index 6d970608f2..bdb8eb529d 100644 --- a/include/configs/sbc8548.h +++ b/include/configs/sbc8548.h @@ -102,7 +102,7 @@ #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR /* DDR Setup */ -#define CONFIG_FSL_DDR2 +#define CONFIG_SYS_FSL_DDR2 #undef CONFIG_FSL_DDR_INTERACTIVE #undef CONFIG_DDR_ECC /* only for ECC DDR module */ /* diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h index 7db0eb8cb3..4569fd4840 100644 --- a/include/configs/siemens-am33x-common.h +++ b/include/configs/siemens-am33x-common.h @@ -131,11 +131,10 @@ /* I2C Configuration */ #define CONFIG_I2C #define CONFIG_CMD_I2C -#define CONFIG_HARD_I2C -#define CONFIG_SYS_I2C_SLAVE 1 -#define CONFIG_I2C_MULTI_BUS -#define CONFIG_DRIVER_OMAP24XX_I2C - +#define CONFIG_SYS_I2C +#define CONFIG_SYS_OMAP24_I2C_SPEED OMAP_I2C_STANDARD +#define CONFIG_SYS_OMAP24_I2C_SLAVE 1 +#define CONFIG_SYS_I2C_OMAP24XX /* Defines for SPL */ #define CONFIG_SPL @@ -196,6 +195,7 @@ #define CONFIG_SYS_NAND_ECCSIZE 512 #define CONFIG_SYS_NAND_ECCBYTES 14 +#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW #define CONFIG_SYS_NAND_ECCSTEPS 4 #define CONFIG_SYS_NAND_ECCTOTAL (CONFIG_SYS_NAND_ECCBYTES * \ @@ -456,6 +456,7 @@ "\0" #define CONFIG_NAND_OMAP_GPMC +#define CONFIG_NAND_OMAP_ELM #define GPMC_NAND_ECC_LP_x16_LAYOUT 1 #define CONFIG_SYS_NAND_BASE (0x08000000) /* physical address */ /* to access nand at */ diff --git a/include/configs/smdkv310.h b/include/configs/smdkv310.h index e2e8efe58c..1388f49986 100644 --- a/include/configs/smdkv310.h +++ b/include/configs/smdkv310.h @@ -25,9 +25,6 @@ /* Mach Type */ #define CONFIG_MACH_TYPE MACH_TYPE_SMDKV310 -/* Keep L2 Cache Disabled */ -#define CONFIG_L2_OFF 1 - #define CONFIG_SYS_SDRAM_BASE 0x40000000 #define CONFIG_SYS_TEXT_BASE 0x43E00000 diff --git a/include/configs/snowball.h b/include/configs/snowball.h index 00d6fa5e89..9a069f3cdb 100644 --- a/include/configs/snowball.h +++ b/include/configs/snowball.h @@ -23,7 +23,6 @@ * (easy to change) */ #define CONFIG_U8500 -#define CONFIG_L2_OFF #define CONFIG_SYS_MEMTEST_START 0x00000000 #define CONFIG_SYS_MEMTEST_END 0x1FFFFFFF diff --git a/include/configs/socfpga_cyclone5.h b/include/configs/socfpga_cyclone5.h index 980636c93b..608578ad2c 100644 --- a/include/configs/socfpga_cyclone5.h +++ b/include/configs/socfpga_cyclone5.h @@ -16,7 +16,6 @@ #define CONFIG_SOCFPGA_VIRTUAL_TARGET #define CONFIG_ARMV7 -#define CONFIG_L2_OFF #define CONFIG_SYS_DCACHE_OFF #undef CONFIG_USE_IRQ diff --git a/include/configs/socrates.h b/include/configs/socrates.h index b6fbe23706..0e6b86412d 100644 --- a/include/configs/socrates.h +++ b/include/configs/socrates.h @@ -80,7 +80,7 @@ #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR /* DDR Setup */ -#define CONFIG_FSL_DDR2 +#define CONFIG_SYS_FSL_DDR2 #undef CONFIG_FSL_DDR_INTERACTIVE #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ #define CONFIG_DDR_SPD diff --git a/include/configs/spieval.h b/include/configs/spieval.h deleted file mode 100644 index 07668de4d9..0000000000 --- a/include/configs/spieval.h +++ /dev/null @@ -1,494 +0,0 @@ -/* - * (C) Copyright 2003-2005 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * (C) Copyright 2004-2005 - * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ -#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */ -#define CONFIG_TQM5200 1 /* ... on TQM5200 module */ -#undef CONFIG_TQM5200_REV100 /* define for revision 100 modules */ -#define CONFIG_STK52XX 1 /* ... on a STK52XX base board */ -#define CONFIG_STK52XX_REV100 1 /* define for revision 100 baseboards */ - -#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ - -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -/* - * Serial console configuration - */ -#define CONFIG_PSC_CONSOLE 6 /* console is on PSC6 */ -#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } - -#ifdef CONFIG_STK52XX -#undef CONFIG_PS2KBD /* AT-PS/2 Keyboard */ -#define CONFIG_PS2MULT /* .. on PS/2 Multiplexer */ -#define CONFIG_PS2SERIAL 6 /* .. on PSC6 */ -#define CONFIG_PS2MULT_DELAY (CONFIG_SYS_HZ/2) /* Initial delay */ -#define CONFIG_BOARD_EARLY_INIT_R -#endif /* CONFIG_STK52XX */ - -/* - * PCI Mapping: - * 0x40000000 - 0x4fffffff - PCI Memory - * 0x50000000 - 0x50ffffff - PCI IO Space - */ -#ifdef CONFIG_STK52XX -#define CONFIG_PCI 1 -#define CONFIG_PCI_PNP 1 -/* #define CONFIG_PCI_SCAN_SHOW 1 */ - -#define CONFIG_PCI_MEM_BUS 0x40000000 -#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS -#define CONFIG_PCI_MEM_SIZE 0x10000000 - -#define CONFIG_PCI_IO_BUS 0x50000000 -#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS -#define CONFIG_PCI_IO_SIZE 0x01000000 - -#define CONFIG_EEPRO100 1 -#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ -#define CONFIG_NS8382X 1 -#endif /* CONFIG_STK52XX */ - -/* - * Video console - */ -#if 1 -#define CONFIG_VIDEO -#define CONFIG_VIDEO_SM501 -#define CONFIG_VIDEO_SM501_32BPP -#define CONFIG_CFB_CONSOLE -#define CONFIG_VIDEO_LOGO -#define CONFIG_VGA_AS_SINGLE_DEVICE -#define CONFIG_CONSOLE_EXTRA_INFO -#define CONFIG_VIDEO_SW_CURSOR -#define CONFIG_SPLASH_SCREEN -#define CONFIG_SYS_CONSOLE_IS_IN_ENV -#endif - -/* Partitions */ -#define CONFIG_MAC_PARTITION -#define CONFIG_DOS_PARTITION -#define CONFIG_ISO_PARTITION - -/* USB */ -#ifdef CONFIG_STK52XX -#define CONFIG_USB_OHCI -#define CONFIG_USB_STORAGE -#endif - -/* POST support */ -#define CONFIG_POST (CONFIG_SYS_POST_MEMORY | \ - CONFIG_SYS_POST_CPU | \ - CONFIG_SYS_POST_I2C) - -#ifdef CONFIG_POST -/* preserve space for the post_word at end of on-chip SRAM */ -#define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4 -#endif - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_ECHO -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII -#define CONFIG_CMD_NFS -#define CONFIG_CMD_PING -#define CONFIG_CMD_REGINFO -#define CONFIG_CMD_SNTP - -#if defined(CONFIG_MINIFAP) || defined(CONFIG_STK52XX) - #define CONFIG_CMD_IDE - #define CONFIG_CMD_FAT - #define CONFIG_CMD_EXT2 -#endif - -#ifdef CONFIG_STK52XX - #define CONFIG_CMD_USB - #define CONFIG_CMD_FAT -#endif - -#ifdef CONFIG_VIDEO - #define CONFIG_CMD_BMP -#endif - -#ifdef CONFIG_PCI - #define CONFIG_CMD_PCI - #define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1 -#endif - -#ifdef CONFIG_POST -#define CONFIG_CMD_DIAG -#endif - - -#define CONFIG_TIMESTAMP /* display image timestamps */ - -#if (CONFIG_SYS_TEXT_BASE == 0xFC000000) /* Boot low */ -# define CONFIG_SYS_LOWBOOT 1 -#endif - -/* - * Autobooting - */ -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ - -#define CONFIG_PREBOOT "echo;" \ - "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \ - "echo" - -#undef CONFIG_BOOTARGS - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "rootpath=/opt/eldk/ppc_6xx\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "flash_self=run ramargs addip;" \ - "bootm ${kernel_addr} ${ramdisk_addr}\0" \ - "flash_nfs=run nfsargs addip;" \ - "bootm ${kernel_addr}\0" \ - "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ - "bootfile=/tftpboot/tqm5200/uImage\0" \ - "load=tftp 200000 ${u-boot}\0" \ - "u-boot=/tftpboot/tqm5200/u-boot.bin\0" \ - "update=protect off FC000000 FC05FFFF;" \ - "erase FC000000 FC05FFFF;" \ - "cp.b 200000 FC000000 ${filesize};" \ - "protect on FC000000 FC05FFFF\0" \ - "" - -#define CONFIG_BOOTCOMMAND "run net_nfs" - -/* - * IPB Bus clocking configuration. - */ -#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ - -#if defined(CONFIG_SYS_IPBCLK_EQUALS_XLBCLK) -/* - * PCI Bus clocking configuration - * - * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if - * CONFIG_SYS_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock - * of 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz. - */ -#define CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2 /* define for 66MHz speed */ -#endif - -/* - * I2C configuration - */ -#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ -#ifdef CONFIG_TQM5200_REV100 -#define CONFIG_SYS_I2C_MODULE 1 /* Select I2C module #1 for rev. 100 board */ -#else -#define CONFIG_SYS_I2C_MODULE 2 /* Select I2C module #2 for all other revs */ -#endif - -/* - * I2C clock frequency - * - * Please notice, that the resulting clock frequency could differ from the - * configured value. This is because the I2C clock is derived from system - * clock over a frequency divider with only a few divider values. U-boot - * calculates the best approximation for CONFIG_SYS_I2C_SPEED. However the calculated - * approximation allways lies below the configured value, never above. - */ -#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */ -#define CONFIG_SYS_I2C_SLAVE 0x7F - -/* - * EEPROM configuration for onboard EEPROM M24C32 (M24C64 should work - * also). For other EEPROMs configuration should be verified. On Mini-FAP the - * EEPROM (24C64) is on the same I2C address (but on other I2C bus), so the - * same configuration could be used. - */ -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* 1010000x */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 /* =32 Bytes per write */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20 - -/* - * HW-Monitor configuration on Mini-FAP - */ -#if defined (CONFIG_MINIFAP) -#define CONFIG_SYS_I2C_HWMON_ADDR 0x2C -#endif - -/* List of I2C addresses to be verified by POST */ -#if defined (CONFIG_MINIFAP) -#undef CONFIG_SYS_POST_I2C_ADDRS -#define CONFIG_SYS_POST_I2C_ADDRS {CONFIG_SYS_I2C_EEPROM_ADDR, \ - CONFIG_SYS_I2C_HWMON_ADDR, \ - CONFIG_SYS_I2C_SLAVE} -#endif - -/* - * Flash configuration - */ -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_TEXT_BASE /* 0xFC000000 */ - -/* use CFI flash driver if no module variant is spezified */ -#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */ -#define CONFIG_FLASH_CFI_DRIVER 1 /* Use the common driver */ -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_BOOTCS_START } -#define CONFIG_SYS_FLASH_EMPTY_INFO -#define CONFIG_SYS_FLASH_SIZE 0x04000000 /* 64 MByte */ -#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sects on one chip */ -#undef CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* not supported yet for AMD */ - -#if !defined(CONFIG_SYS_LOWBOOT) -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x00760000 + 0x00800000) -#else /* CONFIG_SYS_LOWBOOT */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x00060000) -#endif /* CONFIG_SYS_LOWBOOT */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks - (= chip selects) */ -#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ - - -/* - * Environment settings - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SIZE 0x10000 -#define CONFIG_ENV_SECT_SIZE 0x20000 -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) - -/* - * Memory map - */ -#define CONFIG_SYS_MBAR 0xF0000000 -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_DEFAULT_MBAR 0x80000000 - -/* Use ON-Chip SRAM until RAM will be available */ -#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM -#ifdef CONFIG_POST -/* preserve space for the post_word at end of on-chip SRAM */ -#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_POST_SIZE -#else -#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE -#endif - - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -# define CONFIG_SYS_RAMBOOT 1 -#endif - -#define CONFIG_SYS_MONITOR_LEN (384 << 10) /* Reserve 384 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/* - * Ethernet configuration - */ -#define CONFIG_MPC5xxx_FEC 1 -/* - * Define CONFIG_FEC_10MBIT to force FEC at 10Mb - */ -/* #define CONFIG_FEC_10MBIT 1 */ -#define CONFIG_PHY_ADDR 0x00 - -/* - * GPIO configuration - * - * use pin gpio_wkup_6 as second SDRAM chip select (mem_cs1): - * Bit 0 (mask: 0x80000000): 1 - * use ALT CAN position: Bits 2-3 (mask: 0x30000000): - * 00 -> No Alternatives, CAN1/2 on PSC2 according to PSC2 setting. - * 01 -> CAN1 on I2C1, CAN2 on Tmr0/1. - * Use for REV200 STK52XX boards. Do not use with REV100 modules - * (because, there I2C1 is used as I2C bus) - * use PSC1 as UART: Bits 28-31 (mask: 0x00000007): 0100 - * use PSC2 as CAN: Bits 25:27 (mask: 0x00000030) - * 000 -> All PSC2 pins are GIOPs - * 001 -> CAN1/2 on PSC2 pins - * Use for REV100 STK52xx boards - * use PSC6: - * on STK52xx: - * use as UART. Pins PSC6_0 to PSC6_3 are used. - * Bits 9:11 (mask: 0x00700000): - * 101 -> PSC6 : Extended POST test is not available - * on MINI-FAP and TQM5200_IB: - * use PSC6_0 to PSC6_3 as GPIO: Bits 9:11 (mask: 0x00700000): - * 000 -> PSC6 could not be used as UART, CODEC or IrDA - * GPIO on PSC6_3 is used in post_hotkeys_pressed() to enable extended POST - * tests. - */ -#if defined (CONFIG_MINIFAP) -# define CONFIG_SYS_GPS_PORT_CONFIG 0x91000004 -#elif defined (CONFIG_STK52XX) -# if defined (CONFIG_STK52XX_REV100) -# define CONFIG_SYS_GPS_PORT_CONFIG 0x81500014 -# else /* STK52xx REV200 and above */ -# if defined (CONFIG_TQM5200_REV100) -# error TQM5200 REV100 not supported on STK52XX REV200 or above -# else/* TQM5200 REV200 and above */ -# define CONFIG_SYS_GPS_PORT_CONFIG 0x91500004 -# endif -# endif -#else /* TMQ5200 Inbetriebnahme-Board */ -# define CONFIG_SYS_GPS_PORT_CONFIG 0x81000004 -#endif - -/* - * RTC configuration - */ -#define CONFIG_RTC_MPC5200 1 /* use internal MPC5200 RTC */ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -/* Enable an alternate, more extensive memory test */ -#define CONFIG_SYS_ALT_MEMTEST - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -/* - * Enable loopw command. - */ -#define CONFIG_LOOPW - -/* - * Various low-level settings - */ -#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI -#define CONFIG_SYS_HID0_FINAL HID0_ICE - -#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE -#ifdef CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2 -#define CONFIG_SYS_BOOTCS_CFG 0x0008DF30 /* for pci_clk = 66 MHz */ -#else -#define CONFIG_SYS_BOOTCS_CFG 0x0004DF30 /* for pci_clk = 33 MHz */ -#endif -#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE - -#define CONFIG_LAST_STAGE_INIT - -/* - * SRAM - Do not map below 2 GB in address space, because this area is used - * for SDRAM autosizing. - */ -#define CONFIG_SYS_CS2_START 0xE5000000 -#define CONFIG_SYS_CS2_SIZE 0x100000 /* 1 MByte */ -#define CONFIG_SYS_CS2_CFG 0x0004D930 - -/* - * Grafic controller - Do not map below 2 GB in address space, because this - * area is used for SDRAM autosizing. - */ -#define SM501_FB_BASE 0xE0000000 -#define CONFIG_SYS_CS1_START (SM501_FB_BASE) -#define CONFIG_SYS_CS1_SIZE 0x4000000 /* 64 MByte */ -#define CONFIG_SYS_CS1_CFG 0x8F48FF70 -#define SM501_MMIO_BASE CONFIG_SYS_CS1_START + 0x03E00000 - -#define CONFIG_SYS_CS_BURST 0x00000000 -#define CONFIG_SYS_CS_DEADCYCLE 0x33333311 /* 1 dead cycle for flash and SM501 */ - -#define CONFIG_SYS_RESET_ADDRESS 0xff000000 - -/*----------------------------------------------------------------------- - * USB stuff - *----------------------------------------------------------------------- - */ -#define CONFIG_USB_CLOCK 0x0001BBBB -#define CONFIG_USB_CONFIG 0x00001000 - -/*----------------------------------------------------------------------- - * IDE/ATA stuff Supports IDE harddisk - *----------------------------------------------------------------------- - */ - -#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */ - -#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ -#undef CONFIG_IDE_LED /* LED for ide not supported */ - -#define CONFIG_IDE_RESET /* reset for ide supported */ -#define CONFIG_IDE_PREINIT - -#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ -#define CONFIG_SYS_IDE_MAXDEVICE 2 /* max. 2 drives per IDE bus */ - -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 - -#define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA - -/* Offset for data I/O */ -#define CONFIG_SYS_ATA_DATA_OFFSET (0x0060) - -/* Offset for normal register accesses */ -#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET) - -/* Offset for alternate registers */ -#define CONFIG_SYS_ATA_ALT_OFFSET (0x005C) - -/* Interval between registers */ -#define CONFIG_SYS_ATA_STRIDE 4 - -#endif /* __CONFIG_H */ diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h index 9b3f0cc69f..ee1f1f3ed0 100644 --- a/include/configs/stxgp3.h +++ b/include/configs/stxgp3.h @@ -98,7 +98,7 @@ #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR /* DDR Setup */ -#define CONFIG_FSL_DDR1 +#define CONFIG_SYS_FSL_DDR1 #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/ #define CONFIG_DDR_SPD #undef CONFIG_FSL_DDR_INTERACTIVE diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h index 805814f4fb..63dd767047 100644 --- a/include/configs/stxssa.h +++ b/include/configs/stxssa.h @@ -112,7 +112,7 @@ #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR /* DDR Setup */ -#define CONFIG_FSL_DDR1 +#define CONFIG_SYS_FSL_DDR1 #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/ #define CONFIG_DDR_SPD #undef CONFIG_FSL_DDR_INTERACTIVE diff --git a/include/configs/t4qds.h b/include/configs/t4qds.h index 3f54f1423e..d9b0ed07d6 100644 --- a/include/configs/t4qds.h +++ b/include/configs/t4qds.h @@ -87,7 +87,7 @@ #define CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE #define CONFIG_DDR_SPD -#define CONFIG_FSL_DDR3 +#define CONFIG_SYS_FSL_DDR3 /* diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h index 683bc54a2c..439fc47eb8 100644 --- a/include/configs/tam3517-common.h +++ b/include/configs/tam3517-common.h @@ -117,14 +117,13 @@ #undef CONFIG_CMD_IMLS #define CONFIG_SYS_NO_FLASH -#define CONFIG_HARD_I2C -#define CONFIG_SYS_I2C_SPEED 400000 -#define CONFIG_SYS_I2C_SLAVE 1 +#define CONFIG_SYS_I2C +#define CONFIG_SYS_OMAP24_I2C_SPEED 400000 +#define CONFIG_SYS_OMAP24_I2C_SLAVE 1 +#define CONFIG_SYS_I2C_OMAP34XX #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* base address */ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* bytes of address */ #define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x07 -#define CONFIG_DRIVER_OMAP34XX_I2C - /* * Board NAND Info. @@ -225,7 +224,6 @@ #define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_CONSOLE #define CONFIG_SPL_NAND_SIMPLE -#define CONFIG_SPL_NAND_SOFTECC #define CONFIG_SPL_NAND_WORKSPACE 0x8f07f000 /* below BSS */ #define CONFIG_SPL_LIBCOMMON_SUPPORT @@ -262,6 +260,7 @@ 56, 57, 58, 59, 60, 61, 62, 63} #define CONFIG_SYS_NAND_ECCSIZE 256 #define CONFIG_SYS_NAND_ECCBYTES 3 +#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_SW #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE @@ -369,7 +368,7 @@ struct tam3517_module_info { #define TAM3517_READ_EEPROM(info, ret) \ do { \ - i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); \ + i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE); \ if (eeprom_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, \ (void *)info, sizeof(*info))) \ ret = 1; \ diff --git a/include/configs/tcm-bf537.h b/include/configs/tcm-bf537.h index 2adb071ddb..627836a7e8 100644 --- a/include/configs/tcm-bf537.h +++ b/include/configs/tcm-bf537.h @@ -112,8 +112,8 @@ * it linked after the configuration sector. */ # define LDS_BOARD_TEXT \ - arch/blackfin/lib/libblackfin.o (.text*); \ - arch/blackfin/cpu/libblackfin.o (.text*); \ + arch/blackfin/lib/built-in.o (.text*); \ + arch/blackfin/cpu/built-in.o (.text*); \ . = DEFINED(env_offset) ? env_offset : .; \ common/env_embedded.o (.text*); #endif diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h index 84269ad262..99b60fcf61 100644 --- a/include/configs/ti_armv7_common.h +++ b/include/configs/ti_armv7_common.h @@ -59,12 +59,11 @@ /* I2C IP block */ #define CONFIG_I2C -#define CONFIG_HARD_I2C -#define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_SYS_I2C_SLAVE 1 -#define CONFIG_I2C_MULTI_BUS -#define CONFIG_DRIVER_OMAP24XX_I2C #define CONFIG_CMD_I2C +#define CONFIG_SYS_I2C +#define CONFIG_SYS_OMAP24_I2C_SPEED 100000 +#define CONFIG_SYS_OMAP24_I2C_SLAVE 1 +#define CONFIG_SYS_I2C_OMAP24XX /* MMC/SD IP block */ #define CONFIG_MMC diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h index d57394e550..cc4001fcd1 100644 --- a/include/configs/tricorder.h +++ b/include/configs/tricorder.h @@ -98,11 +98,11 @@ #define CONFIG_DOS_PARTITION /* I2C */ -#define CONFIG_HARD_I2C -#define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_SYS_I2C_SLAVE 1 -#define CONFIG_DRIVER_OMAP34XX_I2C 1 -#define CONFIG_I2C_MULTI_BUS +#define CONFIG_SYS_I2C +#define CONFIG_SYS_OMAP24_I2C_SPEED 100000 +#define CONFIG_SYS_OMAP24_I2C_SLAVE 1 +#define CONFIG_SYS_I2C_OMAP34XX + /* EEPROM */ #define CONFIG_SYS_I2C_MULTI_EEPROMS @@ -138,8 +138,9 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ /* devices */ -#define CONFIG_NAND_OMAP_BCH8 #define CONFIG_BCH +#define CONFIG_SYS_NAND_MAX_OOBFREE 2 +#define CONFIG_SYS_NAND_MAX_ECCPOS 56 /* commands to include */ #include <config_cmd_default.h> @@ -374,6 +375,7 @@ #define CONFIG_SYS_NAND_ECCSIZE 512 #define CONFIG_SYS_NAND_ECCBYTES 13 +#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW_DETECTION_SW #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE diff --git a/include/configs/u8500_href.h b/include/configs/u8500_href.h index 45d33a6896..629299d107 100644 --- a/include/configs/u8500_href.h +++ b/include/configs/u8500_href.h @@ -12,7 +12,6 @@ * (easy to change) */ #define CONFIG_U8500 -#define CONFIG_L2_OFF #define CONFIG_SYS_MEMTEST_START 0x00000000 #define CONFIG_SYS_MEMTEST_END 0x1FFFFFFF diff --git a/include/configs/xpedite517x.h b/include/configs/xpedite517x.h index 4738c23350..88d7f88cc0 100644 --- a/include/configs/xpedite517x.h +++ b/include/configs/xpedite517x.h @@ -40,7 +40,7 @@ /* * DDR config */ -#define CONFIG_FSL_DDR2 +#define CONFIG_SYS_FSL_DDR2 #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ #define CONFIG_DDR_SPD #define CONFIG_MEM_INIT_VALUE 0xdeadbeef diff --git a/include/configs/xpedite520x.h b/include/configs/xpedite520x.h index 33428803eb..f39d6f9105 100644 --- a/include/configs/xpedite520x.h +++ b/include/configs/xpedite520x.h @@ -39,7 +39,7 @@ /* * DDR config */ -#define CONFIG_FSL_DDR2 +#define CONFIG_SYS_FSL_DDR2 #undef CONFIG_FSL_DDR_INTERACTIVE #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ #define CONFIG_DDR_SPD diff --git a/include/configs/xpedite537x.h b/include/configs/xpedite537x.h index 9da845d9a2..e1bdf90de4 100644 --- a/include/configs/xpedite537x.h +++ b/include/configs/xpedite537x.h @@ -49,7 +49,7 @@ /* * DDR config */ -#define CONFIG_FSL_DDR2 +#define CONFIG_SYS_FSL_DDR2 #undef CONFIG_FSL_DDR_INTERACTIVE #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ #define CONFIG_DDR_SPD diff --git a/include/configs/xpedite550x.h b/include/configs/xpedite550x.h index 4137cc9208..2328c7a62e 100644 --- a/include/configs/xpedite550x.h +++ b/include/configs/xpedite550x.h @@ -49,7 +49,7 @@ /* * DDR config */ -#define CONFIG_FSL_DDR3 +#define CONFIG_SYS_FSL_DDR3 #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ #define CONFIG_DDR_SPD #define CONFIG_MEM_INIT_VALUE 0xdeadbeef diff --git a/include/configs/zynq.h b/include/configs/zynq.h index 4c6e6e8f6a..82ec826f73 100644 --- a/include/configs/zynq.h +++ b/include/configs/zynq.h @@ -60,10 +60,10 @@ /* I2C */ #if defined(CONFIG_ZYNQ_I2C0) || defined(CONFIG_ZYNQ_I2C1) # define CONFIG_CMD_I2C -# define CONFIG_ZYNQ_I2C -# define CONFIG_HARD_I2C -# define CONFIG_SYS_I2C_SPEED 100000 -# define CONFIG_SYS_I2C_SLAVE 1 +# define CONFIG_SYS_I2C +# define CONFIG_SYS_I2C_ZYNQ +# define CONFIG_SYS_I2C_ZYNQ_SPEED 100000 +# define CONFIG_SYS_I2C_ZYNQ_SLAVE 1 #endif #if defined(CONFIG_ZYNQ_DCC) diff --git a/include/fm_eth.h b/include/fm_eth.h index 5a4fb70dfa..98edfcf4ad 100644 --- a/include/fm_eth.h +++ b/include/fm_eth.h @@ -22,6 +22,8 @@ enum fm_port { FM1_DTSEC10, FM1_10GEC1, FM1_10GEC2, + FM1_10GEC3, + FM1_10GEC4, FM2_DTSEC1, FM2_DTSEC2, FM2_DTSEC3, @@ -85,6 +87,22 @@ enum fm_eth_type { .compat_offset = CONFIG_SYS_FSL_FM##idx##_OFFSET + \ offsetof(struct ccsr_fman, memac[n-1+8]),\ } + +#if (CONFIG_SYS_NUM_FM1_10GEC >= 3) +#define FM_TGEC_INFO_INITIALIZER2(idx, n) \ +{ \ + FM_ETH_INFO_INITIALIZER(idx, CONFIG_SYS_FM1_TGEC_MDIO_ADDR) \ + .index = idx, \ + .num = n - 1, \ + .type = FM_ETH_10G_E, \ + .port = FM##idx##_10GEC##n, \ + .rx_port_id = RX_PORT_10G_BASE2 + n - 3, \ + .tx_port_id = TX_PORT_10G_BASE2 + n - 3, \ + .compat_offset = CONFIG_SYS_FSL_FM##idx##_OFFSET + \ + offsetof(struct ccsr_fman, memac[n-1-2]),\ +} +#endif + #else #define FM_DTSEC_INFO_INITIALIZER(idx, n) \ { \ diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ddr.h b/include/fsl_ddr.h index e3b414e666..e03f9db5f2 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/ddr.h +++ b/include/fsl_ddr.h @@ -9,10 +9,10 @@ #ifndef FSL_DDR_MAIN_H #define FSL_DDR_MAIN_H -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> -#include "common_timing_params.h" +#include <common_timing_params.h> #if defined(CONFIG_DDR_SPD) || defined(CONFIG_SPD_EEPROM) /* diff --git a/arch/powerpc/include/asm/fsl_ddr_dimm_params.h b/include/fsl_ddr_dimm_params.h index 99a72bc6e1..99a72bc6e1 100644 --- a/arch/powerpc/include/asm/fsl_ddr_dimm_params.h +++ b/include/fsl_ddr_dimm_params.h diff --git a/arch/powerpc/include/asm/fsl_ddr_sdram.h b/include/fsl_ddr_sdram.h index 2c3c514ba3..16cccc7708 100644 --- a/arch/powerpc/include/asm/fsl_ddr_sdram.h +++ b/include/fsl_ddr_sdram.h @@ -36,25 +36,25 @@ #define DDR2_RTT_150_OHM 2 #define DDR2_RTT_50_OHM 3 -#if defined(CONFIG_FSL_DDR1) +#if defined(CONFIG_SYS_FSL_DDR1) #define FSL_DDR_MIN_TCKE_PULSE_WIDTH_DDR (1) typedef ddr1_spd_eeprom_t generic_spd_eeprom_t; #ifndef CONFIG_FSL_SDRAM_TYPE #define CONFIG_FSL_SDRAM_TYPE SDRAM_TYPE_DDR1 #endif -#elif defined(CONFIG_FSL_DDR2) +#elif defined(CONFIG_SYS_FSL_DDR2) #define FSL_DDR_MIN_TCKE_PULSE_WIDTH_DDR (3) typedef ddr2_spd_eeprom_t generic_spd_eeprom_t; #ifndef CONFIG_FSL_SDRAM_TYPE #define CONFIG_FSL_SDRAM_TYPE SDRAM_TYPE_DDR2 #endif -#elif defined(CONFIG_FSL_DDR3) +#elif defined(CONFIG_SYS_FSL_DDR3) #define FSL_DDR_MIN_TCKE_PULSE_WIDTH_DDR (3) /* FIXME */ typedef ddr3_spd_eeprom_t generic_spd_eeprom_t; #ifndef CONFIG_FSL_SDRAM_TYPE #define CONFIG_FSL_SDRAM_TYPE SDRAM_TYPE_DDR3 #endif -#endif /* #if defined(CONFIG_FSL_DDR1) */ +#endif /* #if defined(CONFIG_SYS_FSL_DDR1) */ #define FSL_DDR_ODT_NEVER 0x0 #define FSL_DDR_ODT_CS 0x1 diff --git a/arch/powerpc/include/asm/fsl_ifc.h b/include/fsl_ifc.h index a945e4b2d4..be6c10715b 100644 --- a/arch/powerpc/include/asm/fsl_ifc.h +++ b/include/fsl_ifc.h @@ -5,8 +5,8 @@ * SPDX-License-Identifier: GPL-2.0+ */ -#ifndef __ASM_PPC_FSL_IFC_H -#define __ASM_PPC_FSL_IFC_H +#ifndef __FSL_IFC_H +#define __FSL_IFC_H #ifdef CONFIG_FSL_IFC #include <config.h> @@ -77,6 +77,7 @@ #define CSOR_NAND_PGS_512 0x00000000 #define CSOR_NAND_PGS_2K 0x00080000 #define CSOR_NAND_PGS_4K 0x00100000 +#define CSOR_NAND_PGS_8K 0x00180000 /* Spare region Size */ #define CSOR_NAND_SPRZ_MASK 0x0000E000 #define CSOR_NAND_SPRZ_SHIFT 13 @@ -86,6 +87,7 @@ #define CSOR_NAND_SPRZ_210 0x00006000 #define CSOR_NAND_SPRZ_218 0x00008000 #define CSOR_NAND_SPRZ_224 0x0000A000 +#define CSOR_NAND_SPRZ_CSOR_EXT 0x0000C000 /* Pages Per Block */ #define CSOR_NAND_PB_MASK 0x00000700 #define CSOR_NAND_PB_SHIFT 8 @@ -983,4 +985,4 @@ struct fsl_ifc { #endif /* CONFIG_FSL_IFC */ #endif /* __ASSEMBLY__ */ -#endif /* __ASM_PPC_FSL_IFC_H */ +#endif /* __FSL_IFC_H */ diff --git a/include/fsl_immap.h b/include/fsl_immap.h new file mode 100644 index 0000000000..00902cae08 --- /dev/null +++ b/include/fsl_immap.h @@ -0,0 +1,112 @@ +/* + * Common internal memory map for some Freescale SoCs + * + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __FSL_IMMAP_H +#define __FSL_IMMAP_H +/* + * DDR memory controller registers + * This structure works for mpc83xx (DDR2 and DDR3), mpc85xx, mpc86xx. + */ +struct ccsr_ddr { + u32 cs0_bnds; /* Chip Select 0 Memory Bounds */ + u8 res_04[4]; + u32 cs1_bnds; /* Chip Select 1 Memory Bounds */ + u8 res_0c[4]; + u32 cs2_bnds; /* Chip Select 2 Memory Bounds */ + u8 res_14[4]; + u32 cs3_bnds; /* Chip Select 3 Memory Bounds */ + u8 res_1c[100]; + u32 cs0_config; /* Chip Select Configuration */ + u32 cs1_config; /* Chip Select Configuration */ + u32 cs2_config; /* Chip Select Configuration */ + u32 cs3_config; /* Chip Select Configuration */ + u8 res_90[48]; + u32 cs0_config_2; /* Chip Select Configuration 2 */ + u32 cs1_config_2; /* Chip Select Configuration 2 */ + u32 cs2_config_2; /* Chip Select Configuration 2 */ + u32 cs3_config_2; /* Chip Select Configuration 2 */ + u8 res_d0[48]; + u32 timing_cfg_3; /* SDRAM Timing Configuration 3 */ + u32 timing_cfg_0; /* SDRAM Timing Configuration 0 */ + u32 timing_cfg_1; /* SDRAM Timing Configuration 1 */ + u32 timing_cfg_2; /* SDRAM Timing Configuration 2 */ + u32 sdram_cfg; /* SDRAM Control Configuration */ + u32 sdram_cfg_2; /* SDRAM Control Configuration 2 */ + u32 sdram_mode; /* SDRAM Mode Configuration */ + u32 sdram_mode_2; /* SDRAM Mode Configuration 2 */ + u32 sdram_md_cntl; /* SDRAM Mode Control */ + u32 sdram_interval; /* SDRAM Interval Configuration */ + u32 sdram_data_init; /* SDRAM Data initialization */ + u8 res_12c[4]; + u32 sdram_clk_cntl; /* SDRAM Clock Control */ + u8 res_134[20]; + u32 init_addr; /* training init addr */ + u32 init_ext_addr; /* training init extended addr */ + u8 res_150[16]; + u32 timing_cfg_4; /* SDRAM Timing Configuration 4 */ + u32 timing_cfg_5; /* SDRAM Timing Configuration 5 */ + u8 reg_168[8]; + u32 ddr_zq_cntl; /* ZQ calibration control*/ + u32 ddr_wrlvl_cntl; /* write leveling control*/ + u8 reg_178[4]; + u32 ddr_sr_cntr; /* self refresh counter */ + u32 ddr_sdram_rcw_1; /* Control Words 1 */ + u32 ddr_sdram_rcw_2; /* Control Words 2 */ + u8 reg_188[8]; + u32 ddr_wrlvl_cntl_2; /* write leveling control 2 */ + u32 ddr_wrlvl_cntl_3; /* write leveling control 3 */ + u8 res_198[104]; + u32 sdram_mode_3; /* SDRAM Mode Configuration 3 */ + u32 sdram_mode_4; /* SDRAM Mode Configuration 4 */ + u32 sdram_mode_5; /* SDRAM Mode Configuration 5 */ + u32 sdram_mode_6; /* SDRAM Mode Configuration 6 */ + u32 sdram_mode_7; /* SDRAM Mode Configuration 7 */ + u32 sdram_mode_8; /* SDRAM Mode Configuration 8 */ + u8 res_218[0x908]; + u32 ddr_dsr1; /* Debug Status 1 */ + u32 ddr_dsr2; /* Debug Status 2 */ + u32 ddr_cdr1; /* Control Driver 1 */ + u32 ddr_cdr2; /* Control Driver 2 */ + u8 res_b30[200]; + u32 ip_rev1; /* IP Block Revision 1 */ + u32 ip_rev2; /* IP Block Revision 2 */ + u32 eor; /* Enhanced Optimization Register */ + u8 res_c04[252]; + u32 mtcr; /* Memory Test Control Register */ + u8 res_d04[28]; + u32 mtp1; /* Memory Test Pattern 1 */ + u32 mtp2; /* Memory Test Pattern 2 */ + u32 mtp3; /* Memory Test Pattern 3 */ + u32 mtp4; /* Memory Test Pattern 4 */ + u32 mtp5; /* Memory Test Pattern 5 */ + u32 mtp6; /* Memory Test Pattern 6 */ + u32 mtp7; /* Memory Test Pattern 7 */ + u32 mtp8; /* Memory Test Pattern 8 */ + u32 mtp9; /* Memory Test Pattern 9 */ + u32 mtp10; /* Memory Test Pattern 10 */ + u8 res_d48[184]; + u32 data_err_inject_hi; /* Data Path Err Injection Mask High */ + u32 data_err_inject_lo; /* Data Path Err Injection Mask Low */ + u32 ecc_err_inject; /* Data Path Err Injection Mask ECC */ + u8 res_e0c[20]; + u32 capture_data_hi; /* Data Path Read Capture High */ + u32 capture_data_lo; /* Data Path Read Capture Low */ + u32 capture_ecc; /* Data Path Read Capture ECC */ + u8 res_e2c[20]; + u32 err_detect; /* Error Detect */ + u32 err_disable; /* Error Disable */ + u32 err_int_en; + u32 capture_attributes; /* Error Attrs Capture */ + u32 capture_address; /* Error Addr Capture */ + u32 capture_ext_address; /* Error Extended Addr Capture */ + u32 err_sbe; /* Single-Bit ECC Error Management */ + u8 res_e5c[164]; + u32 debug[32]; /* debug_1 to debug_32 */ + u8 res_f80[128]; +}; +#endif /* __FSL_IMMAP_H */ diff --git a/include/fsl_mdio.h b/include/fsl_mdio.h index 9c0b762773..b58713d896 100644 --- a/include/fsl_mdio.h +++ b/include/fsl_mdio.h @@ -1,5 +1,5 @@ /* - * Copyright 2009-2012 Freescale Semiconductor, Inc. + * Copyright 2009-2012, 2013 Freescale Semiconductor, Inc. * Jun-jie Zhang <b18070@freescale.com> * Mingkai Hu <Mingkai.hu@freescale.com> * @@ -31,9 +31,9 @@ #define MIIMIND_BUSY 0x00000001 #define MIIMIND_NOTVALID 0x00000004 -void tsec_local_mdio_write(struct tsec_mii_mng *phyregs, int port_addr, +void tsec_local_mdio_write(struct tsec_mii_mng __iomem *phyregs, int port_addr, int dev_addr, int reg, int value); -int tsec_local_mdio_read(struct tsec_mii_mng *phyregs, int port_addr, +int tsec_local_mdio_read(struct tsec_mii_mng __iomem *phyregs, int port_addr, int dev_addr, int regnum); int tsec_phy_read(struct mii_dev *bus, int addr, int dev_addr, int regnum); int tsec_phy_write(struct mii_dev *bus, int addr, int dev_addr, int regnum, @@ -44,7 +44,7 @@ int memac_mdio_read(struct mii_dev *bus, int port_addr, int dev_addr, int regnum); struct fsl_pq_mdio_info { - struct tsec_mii_mng *regs; + struct tsec_mii_mng __iomem *regs; char *name; }; int fsl_pq_mdio_init(bd_t *bis, struct fsl_pq_mdio_info *info); diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h index 6f44abdc16..a65b681551 100644 --- a/include/linux/mtd/mtd.h +++ b/include/linux/mtd/mtd.h @@ -96,6 +96,29 @@ struct mtd_oob_ops { uint8_t *oobbuf; }; +#ifdef CONFIG_SYS_NAND_MAX_OOBFREE +#define MTD_MAX_OOBFREE_ENTRIES_LARGE CONFIG_SYS_NAND_MAX_OOBFREE +#else +#define MTD_MAX_OOBFREE_ENTRIES_LARGE 32 +#endif + +#ifdef CONFIG_SYS_NAND_MAX_ECCPOS +#define MTD_MAX_ECCPOS_ENTRIES_LARGE CONFIG_SYS_NAND_MAX_ECCPOS +#else +#define MTD_MAX_ECCPOS_ENTRIES_LARGE 640 +#endif + +/* + * ECC layout control structure. Exported to userspace for + * diagnosis and to allow creation of raw images + */ +struct nand_ecclayout { + uint32_t eccbytes; + uint32_t eccpos[MTD_MAX_ECCPOS_ENTRIES_LARGE]; + uint32_t oobavail; + struct nand_oobfree oobfree[MTD_MAX_OOBFREE_ENTRIES_LARGE]; +}; + struct mtd_info { u_char type; u_int32_t flags; diff --git a/include/micrel.h b/include/micrel.h index e1c62d83cb..04c9ecf3bf 100644 --- a/include/micrel.h +++ b/include/micrel.h @@ -15,6 +15,11 @@ #define MII_KSZ9031_MOD_DATA_POST_INC_RW 0x8000 #define MII_KSZ9031_MOD_DATA_POST_INC_W 0xC000 +#define MII_KSZ9031_EXT_RGMII_CTRL_SIG_SKEW 0x4 +#define MII_KSZ9031_EXT_RGMII_RX_DATA_SKEW 0x5 +#define MII_KSZ9031_EXT_RGMII_TX_DATA_SKEW 0x6 +#define MII_KSZ9031_EXT_RGMII_CLOCK_SKEW 0x8 + struct phy_device; int ksz9021_phy_extended_write(struct phy_device *phydev, int regnum, u16 val); int ksz9021_phy_extended_read(struct phy_device *phydev, int regnum); diff --git a/include/msc01.h b/include/msc01.h new file mode 100644 index 0000000000..37cf963f13 --- /dev/null +++ b/include/msc01.h @@ -0,0 +1,135 @@ +/* + * Copyright (C) 2013 Imagination Technologies + * Author: Paul Burton <paul.burton@imgtec.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __MSC01_H__ +#define __MSC01_H__ + +/* + * Bus Interface Unit + */ + +#define MSC01_BIU_IP1BAS1L_OFS 0x0208 +#define MSC01_BIU_IP1MSK1L_OFS 0x0218 +#define MSC01_BIU_IP1BAS2L_OFS 0x0248 +#define MSC01_BIU_IP1MSK2L_OFS 0x0258 +#define MSC01_BIU_IP2BAS1L_OFS 0x0288 +#define MSC01_BIU_IP2MSK1L_OFS 0x0298 +#define MSC01_BIU_IP2BAS2L_OFS 0x02c8 +#define MSC01_BIU_IP2MSK2L_OFS 0x02d8 +#define MSC01_BIU_IP3BAS1L_OFS 0x0308 +#define MSC01_BIU_IP3MSK1L_OFS 0x0318 +#define MSC01_BIU_IP3BAS2L_OFS 0x0348 +#define MSC01_BIU_IP3MSK2L_OFS 0x0358 +#define MSC01_BIU_MCBAS1L_OFS 0x0388 +#define MSC01_BIU_MCMSK1L_OFS 0x0398 +#define MSC01_BIU_MCBAS2L_OFS 0x03c8 +#define MSC01_BIU_MCMSK2L_OFS 0x03d8 + +/* + * PCI Bridge + */ + +#define MSC01_PCI_SC2PMBASL_OFS 0x0208 +#define MSC01_PCI_SC2PMMSKL_OFS 0x0218 +#define MSC01_PCI_SC2PMMAPL_OFS 0x0228 +#define MSC01_PCI_SC2PIOBASL_OFS 0x0248 +#define MSC01_PCI_SC2PIOMSKL_OFS 0x0258 +#define MSC01_PCI_SC2PIOMAPL_OFS 0x0268 +#define MSC01_PCI_P2SCMSKL_OFS 0x0308 +#define MSC01_PCI_P2SCMAPL_OFS 0x0318 +#define MSC01_PCI_INTSTAT_OFS 0x0608 +#define MSC01_PCI_CFGADDR_OFS 0x0610 +#define MSC01_PCI_CFGDATA_OFS 0x0618 +#define MSC01_PCI_HEAD0_OFS 0x2000 +#define MSC01_PCI_HEAD1_OFS 0x2008 +#define MSC01_PCI_HEAD2_OFS 0x2010 +#define MSC01_PCI_HEAD3_OFS 0x2018 +#define MSC01_PCI_HEAD4_OFS 0x2020 +#define MSC01_PCI_HEAD5_OFS 0x2028 +#define MSC01_PCI_HEAD6_OFS 0x2030 +#define MSC01_PCI_HEAD7_OFS 0x2038 +#define MSC01_PCI_HEAD8_OFS 0x2040 +#define MSC01_PCI_HEAD9_OFS 0x2048 +#define MSC01_PCI_HEAD10_OFS 0x2050 +#define MSC01_PCI_HEAD11_OFS 0x2058 +#define MSC01_PCI_HEAD12_OFS 0x2060 +#define MSC01_PCI_HEAD13_OFS 0x2068 +#define MSC01_PCI_HEAD14_OFS 0x2070 +#define MSC01_PCI_HEAD15_OFS 0x2078 +#define MSC01_PCI_BAR0_OFS 0x2220 +#define MSC01_PCI_CFG_OFS 0x2380 +#define MSC01_PCI_SWAP_OFS 0x2388 + +#define MSC01_PCI_SC2PMMSKL_MSK_MSK 0xff000000 +#define MSC01_PCI_SC2PIOMSKL_MSK_MSK 0xff000000 + +#define MSC01_PCI_INTSTAT_TA_SHF 6 +#define MSC01_PCI_INTSTAT_TA_MSK (0x1 << MSC01_PCI_INTSTAT_TA_SHF) +#define MSC01_PCI_INTSTAT_MA_SHF 7 +#define MSC01_PCI_INTSTAT_MA_MSK (0x1 << MSC01_PCI_INTSTAT_MA_SHF) + +#define MSC01_PCI_CFGADDR_BNUM_SHF 16 +#define MSC01_PCI_CFGADDR_BNUM_MSK (0xff << MSC01_PCI_CFGADDR_BNUM_SHF) +#define MSC01_PCI_CFGADDR_DNUM_SHF 11 +#define MSC01_PCI_CFGADDR_DNUM_MSK (0x1f << MSC01_PCI_CFGADDR_DNUM_SHF) +#define MSC01_PCI_CFGADDR_FNUM_SHF 8 +#define MSC01_PCI_CFGADDR_FNUM_MSK (0x3 << MSC01_PCI_CFGADDR_FNUM_SHF) +#define MSC01_PCI_CFGADDR_RNUM_SHF 2 +#define MSC01_PCI_CFGADDR_RNUM_MSK (0x3f << MSC01_PCI_CFGADDR_RNUM_SHF) + +#define MSC01_PCI_HEAD0_VENDORID_SHF 0 +#define MSC01_PCI_HEAD0_DEVICEID_SHF 16 + +#define MSC01_PCI_HEAD2_REV_SHF 0 +#define MSC01_PCI_HEAD2_CLASS_SHF 16 + +#define MSC01_PCI_CFG_EN_SHF 15 +#define MSC01_PCI_CFG_EN_MSK (0x1 << MSC01_PCI_CFG_EN_SHF) +#define MSC01_PCI_CFG_G_SHF 16 +#define MSC01_PCI_CFG_G_MSK (0x1 << MSC01_PCI_CFG_G_SHF) +#define MSC01_PCI_CFG_RA_SHF 17 +#define MSC01_PCI_CFG_RA_MSK (0x1 << MSC01_PCI_CFG_RA_SHF) + +#define MSC01_PCI_SWAP_BAR0_BSWAP_SHF 0 +#define MSC01_PCI_SWAP_IO_BSWAP_SHF 18 + +/* + * Peripheral Bus Controller + */ + +#define MSC01_PBC_CLKCFG_OFS 0x0100 +#define MSC01_PBC_CS0CFG_OFS 0x0400 +#define MSC01_PBC_CS0TIM_OFS 0x0500 +#define MSC01_PBC_CS0RW_OFS 0x0600 + +#define MSC01_PBC_CLKCFG_SHF 0 +#define MSC01_PBC_CLKCFG_MSK (0x1f << MSC01_PBC_CLKCFG_SHF) + +#define MSC01_PBC_CS0CFG_WS_SHF 0 +#define MSC01_PBC_CS0CFG_WS_MSK (0x1f << MSC01_PBC_CS0CFG_WS_SHF) +#define MSC01_PBC_CS0CFG_WSIDLE_SHF 8 +#define MSC01_PBC_CS0CFG_WSIDLE_MSK (0x1f << MSC01_PBC_CS0CFG_WSIDLE_SHF) +#define MSC01_PBC_CS0CFG_DTYP_SHF 16 +#define MSC01_PBC_CS0CFG_DTYP_MSK (0x3 << MSC01_PBC_CS0CFG_DTYP_SHF) +#define MSC01_PBC_CS0CFG_ADM_SHF 20 +#define MSC01_PBC_CS0CFG_ADM_MSK (0x1 << MSC01_PBC_CS0CFG_ADM_SHF) + +#define MSC01_PBC_CS0TIM_CAT_SHF 0 +#define MSC01_PBC_CS0TIM_CAT_MSK (0x1f << MSC01_PBC_CS0TIM_CAT_SHF) +#define MSC01_PBC_CS0TIM_CDT_SHF 8 +#define MSC01_PBC_CS0TIM_CDT_MSK (0x1f << MSC01_PBC_CS0TIM_CDT_SHF) + +#define MSC01_PBC_CS0RW_WAT_SHF 0 +#define MSC01_PBC_CS0RW_WAT_MSK (0x1f << MSC01_PBC_CS0RW_WAT_SHF) +#define MSC01_PBC_CS0RW_WDT_SHF 8 +#define MSC01_PBC_CS0RW_WDT_MSK (0x1f << MSC01_PBC_CS0RW_WDT_SHF) +#define MSC01_PBC_CS0RW_RAT_SHF 16 +#define MSC01_PBC_CS0RW_RAT_MSK (0x1f << MSC01_PBC_CS0RW_RAT_SHF) +#define MSC01_PBC_CS0RW_RDT_SHF 24 +#define MSC01_PBC_CS0RW_RDT_MSK (0x1f << MSC01_PBC_CS0RW_RDT_SHF) + +#endif /* __MSC01_H__ */ diff --git a/include/mtd/mtd-abi.h b/include/mtd/mtd-abi.h index d51c1abd18..ac3c298760 100644 --- a/include/mtd/mtd-abi.h +++ b/include/mtd/mtd-abi.h @@ -155,18 +155,6 @@ struct nand_oobfree { uint32_t length; }; -#define MTD_MAX_OOBFREE_ENTRIES 8 -/* - * ECC layout control structure. Exported to userspace for - * diagnosis and to allow creation of raw images - */ -struct nand_ecclayout { - uint32_t eccbytes; - uint32_t eccpos[128]; - uint32_t oobavail; - struct nand_oobfree oobfree[MTD_MAX_OOBFREE_ENTRIES]; -}; - /** * struct mtd_ecc_stats - error correction stats * diff --git a/include/net.h b/include/net.h index 5aedc17aa6..0802fad876 100644 --- a/include/net.h +++ b/include/net.h @@ -89,7 +89,7 @@ struct eth_device { int (*recv) (struct eth_device *); void (*halt) (struct eth_device *); #ifdef CONFIG_MCAST_TFTP - int (*mcast) (struct eth_device *, u32 ip, u8 set); + int (*mcast) (struct eth_device *, const u8 *enetaddr, u8 set); #endif int (*write_hwaddr) (struct eth_device *); struct eth_device *next; diff --git a/include/os.h b/include/os.h index 8665f70edb..950433daa3 100644 --- a/include/os.h +++ b/include/os.h @@ -11,6 +11,8 @@ #ifndef __OS_H__ #define __OS_H__ +#include <linux/types.h> + struct sandbox_state; /** @@ -116,7 +118,7 @@ void os_usleep(unsigned long usec); * * \return A monotonic increasing time scaled in nano seconds */ -u64 os_get_nsec(void); +uint64_t os_get_nsec(void); /** * Parse arguments and update sandbox state. diff --git a/include/pci.h b/include/pci.h index d462479667..461f17c058 100644 --- a/include/pci.h +++ b/include/pci.h @@ -417,6 +417,8 @@ #include <pci_ids.h> +#ifndef __ASSEMBLY__ + #ifdef CONFIG_SYS_PCI_64BIT typedef u64 pci_addr_t; typedef u64 pci_size_t; @@ -667,4 +669,6 @@ extern void pci_mpc824x_init (struct pci_controller *hose); #ifdef CONFIG_MPC85xx extern void pci_mpc85xx_init (struct pci_controller *hose); #endif -#endif /* _PCI_H */ + +#endif /* __ASSEMBLY__ */ +#endif /* _PCI_H */ diff --git a/include/pci_ids.h b/include/pci_ids.h index 2c6dfd4044..6bab677449 100644 --- a/include/pci_ids.h +++ b/include/pci_ids.h @@ -2170,6 +2170,9 @@ #define PCI_DEVICE_ID_ENE_720 0x1421 #define PCI_DEVICE_ID_ENE_722 0x1422 +#define PCI_VENDOR_ID_MIPS 0x153f +#define PCI_DEVICE_ID_MIPS_MSC01 0x0001 + #define PCI_SUBVENDOR_ID_PERLE 0x155f #define PCI_SUBDEVICE_ID_PCI_RAS4 0xf001 #define PCI_SUBDEVICE_ID_PCI_RAS8 0xf010 diff --git a/include/pci_msc01.h b/include/pci_msc01.h new file mode 100644 index 0000000000..54945a7a8f --- /dev/null +++ b/include/pci_msc01.h @@ -0,0 +1,17 @@ +/* + * Copyright (C) 2013 Imagination Technologies + * Author: Paul Burton <paul.burton@imgtec.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __PCI_MSC01_H__ +#define __PCI_MSC01_H__ + +extern void msc01_pci_init(void *base, unsigned long sys_bus, + unsigned long sys_phys, unsigned long sys_size, + unsigned long mem_bus, unsigned long mem_phys, + unsigned long mem_size, unsigned long io_bus, + unsigned long io_phys, unsigned long io_size); + +#endif /* __PCI_MSC01_H__ */ diff --git a/include/phy.h b/include/phy.h index f0f522a9c2..1f22fa180c 100644 --- a/include/phy.h +++ b/include/phy.h @@ -125,6 +125,9 @@ struct phy_driver { /* Called when bringing down the controller */ int (*shutdown)(struct phy_device *phydev); + int (*readext)(struct phy_device *phydev, int addr, int devad, int reg); + int (*writeext)(struct phy_device *phydev, int addr, int devad, int reg, + u16 val); struct list_head list; }; @@ -160,6 +163,14 @@ struct phy_device { u32 flags; }; +struct fixed_link { + int phy_id; + int duplex; + int link_speed; + int pause; + int asym_pause; +}; + static inline int phy_read(struct phy_device *phydev, int devad, int regnum) { struct mii_dev *bus = phydev->bus; diff --git a/include/scf0403_lcd.h b/include/scf0403_lcd.h new file mode 100644 index 0000000000..d71896bbda --- /dev/null +++ b/include/scf0403_lcd.h @@ -0,0 +1,11 @@ +/* + * Copyright (c) 2013, Compulab Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#ifndef SCF0403_LCD_H_ +#define SCF0403_LCD_H_ + +int scf0403_init(int reset_gpio); + +#endif diff --git a/include/spi.h b/include/spi.h index ad9248bee0..e2563c99f2 100644 --- a/include/spi.h +++ b/include/spi.h @@ -29,10 +29,13 @@ #define SPI_XFER_END 0x02 /* Deassert CS after transfer */ #define SPI_XFER_MMAP 0x08 /* Memory Mapped start */ #define SPI_XFER_MMAP_END 0x10 /* Memory Mapped End */ +#define SPI_XFER_ONCE (SPI_XFER_BEGIN | SPI_XFER_END) /* Header byte that marks the start of the message */ #define SPI_PREAMBLE_END_BYTE 0xec +#define SPI_DEFAULT_WORDLEN 8 + /** * struct spi_slave - Representation of a SPI slave * @@ -40,6 +43,7 @@ * * @bus: ID of the bus that the slave is attached to. * @cs: ID of the chip select connected to the slave. + * @wordlen: Size of SPI word in number of bits * @max_write_size: If non-zero, the maximum number of bytes which can * be written at once, excluding command bytes. * @memory_map: Address of read-only SPI flash access. @@ -47,6 +51,7 @@ struct spi_slave { unsigned int bus; unsigned int cs; + unsigned int wordlen; unsigned int max_write_size; void *memory_map; }; @@ -153,6 +158,18 @@ int spi_claim_bus(struct spi_slave *slave); void spi_release_bus(struct spi_slave *slave); /** + * Set the word length for SPI transactions + * + * Set the word length (number of bits per word) for SPI transactions. + * + * @slave: The SPI slave + * @wordlen: The number of bits in a word + * + * Returns: 0 on success, -1 on failure. + */ +int spi_set_wordlen(struct spi_slave *slave, unsigned int wordlen); + +/** * SPI transfer * * This writes "bitlen" bits out the SPI MOSI port and simultaneously clocks diff --git a/include/tsec.h b/include/tsec.h index f0f3d4d59b..1046426c5c 100644 --- a/include/tsec.h +++ b/include/tsec.h @@ -7,7 +7,7 @@ * terms of the GNU Public License, Version 2, incorporated * herein by reference. * - * Copyright 2004, 2007, 2009, 2011 Freescale Semiconductor, Inc. + * Copyright 2004, 2007, 2009, 2011, 2013 Freescale Semiconductor, Inc. * (C) Copyright 2003, Motorola, Inc. * maintained by Xianghua Xiao (x.xiao@motorola.com) * author Andy Fleming @@ -27,13 +27,26 @@ #define CONFIG_SYS_MDIO_BASE_ADDR (MDIO_BASE_ADDR + 0x520) +#define TSEC_GET_REGS(num, offset) \ + (struct tsec __iomem *)\ + (TSEC_BASE_ADDR + (((num) - 1) * (offset))) + +#define TSEC_GET_REGS_BASE(num) \ + TSEC_GET_REGS((num), TSEC_SIZE) + +#define TSEC_GET_MDIO_REGS(num, offset) \ + (struct tsec_mii_mng __iomem *)\ + (CONFIG_SYS_MDIO_BASE_ADDR + ((num) - 1) * (offset)) + +#define TSEC_GET_MDIO_REGS_BASE(num) \ + TSEC_GET_MDIO_REGS((num), TSEC_MDIO_OFFSET) + #define DEFAULT_MII_NAME "FSL_MDIO" #define STD_TSEC_INFO(num) \ { \ - .regs = (tsec_t *)(TSEC_BASE_ADDR + ((num - 1) * TSEC_SIZE)), \ - .miiregs_sgmii = (struct tsec_mii_mng *)(CONFIG_SYS_MDIO_BASE_ADDR \ - + (num - 1) * TSEC_MDIO_OFFSET), \ + .regs = TSEC_GET_REGS_BASE(num), \ + .miiregs_sgmii = TSEC_GET_MDIO_REGS_BASE(num), \ .devname = CONFIG_TSEC##num##_NAME, \ .phyaddr = TSEC##num##_PHY_ADDR, \ .flags = TSEC##num##_FLAGS, \ @@ -42,9 +55,8 @@ #define SET_STD_TSEC_INFO(x, num) \ { \ - x.regs = (tsec_t *)(TSEC_BASE_ADDR + ((num - 1) * TSEC_SIZE)); \ - x.miiregs_sgmii = (struct tsec_mii_mng *)(CONFIG_SYS_MDIO_BASE_ADDR \ - + (num - 1) * TSEC_MDIO_OFFSET); \ + x.regs = TSEC_GET_REGS_BASE(num); \ + x.miiregs_sgmii = TSEC_GET_MDIO_REGS_BASE(num); \ x.devname = CONFIG_TSEC##num##_NAME; \ x.phyaddr = TSEC##num##_PHY_ADDR; \ x.flags = TSEC##num##_FLAGS;\ @@ -186,195 +198,190 @@ #define RXBD_TRUNCATED 0x0001 #define RXBD_STATS 0x003f -typedef struct txbd8 -{ - ushort status; /* Status Fields */ - ushort length; /* Buffer length */ - uint bufPtr; /* Buffer Pointer */ -} txbd8_t; - -typedef struct rxbd8 -{ - ushort status; /* Status Fields */ - ushort length; /* Buffer Length */ - uint bufPtr; /* Buffer Pointer */ -} rxbd8_t; - -typedef struct rmon_mib -{ +struct txbd8 { + uint16_t status; /* Status Fields */ + uint16_t length; /* Buffer length */ + uint32_t bufptr; /* Buffer Pointer */ +}; + +struct rxbd8 { + uint16_t status; /* Status Fields */ + uint16_t length; /* Buffer Length */ + uint32_t bufptr; /* Buffer Pointer */ +}; + +struct tsec_rmon_mib { /* Transmit and Receive Counters */ - uint tr64; /* Transmit and Receive 64-byte Frame Counter */ - uint tr127; /* Transmit and Receive 65-127 byte Frame Counter */ - uint tr255; /* Transmit and Receive 128-255 byte Frame Counter */ - uint tr511; /* Transmit and Receive 256-511 byte Frame Counter */ - uint tr1k; /* Transmit and Receive 512-1023 byte Frame Counter */ - uint trmax; /* Transmit and Receive 1024-1518 byte Frame Counter */ - uint trmgv; /* Transmit and Receive 1519-1522 byte Good VLAN Frame */ + u32 tr64; /* Tx/Rx 64-byte Frame Counter */ + u32 tr127; /* Tx/Rx 65-127 byte Frame Counter */ + u32 tr255; /* Tx/Rx 128-255 byte Frame Counter */ + u32 tr511; /* Tx/Rx 256-511 byte Frame Counter */ + u32 tr1k; /* Tx/Rx 512-1023 byte Frame Counter */ + u32 trmax; /* Tx/Rx 1024-1518 byte Frame Counter */ + u32 trmgv; /* Tx/Rx 1519-1522 byte Good VLAN Frame */ /* Receive Counters */ - uint rbyt; /* Receive Byte Counter */ - uint rpkt; /* Receive Packet Counter */ - uint rfcs; /* Receive FCS Error Counter */ - uint rmca; /* Receive Multicast Packet (Counter) */ - uint rbca; /* Receive Broadcast Packet */ - uint rxcf; /* Receive Control Frame Packet */ - uint rxpf; /* Receive Pause Frame Packet */ - uint rxuo; /* Receive Unknown OP Code */ - uint raln; /* Receive Alignment Error */ - uint rflr; /* Receive Frame Length Error */ - uint rcde; /* Receive Code Error */ - uint rcse; /* Receive Carrier Sense Error */ - uint rund; /* Receive Undersize Packet */ - uint rovr; /* Receive Oversize Packet */ - uint rfrg; /* Receive Fragments */ - uint rjbr; /* Receive Jabber */ - uint rdrp; /* Receive Drop */ + u32 rbyt; /* Receive Byte Counter */ + u32 rpkt; /* Receive Packet Counter */ + u32 rfcs; /* Receive FCS Error Counter */ + u32 rmca; /* Receive Multicast Packet (Counter) */ + u32 rbca; /* Receive Broadcast Packet */ + u32 rxcf; /* Receive Control Frame Packet */ + u32 rxpf; /* Receive Pause Frame Packet */ + u32 rxuo; /* Receive Unknown OP Code */ + u32 raln; /* Receive Alignment Error */ + u32 rflr; /* Receive Frame Length Error */ + u32 rcde; /* Receive Code Error */ + u32 rcse; /* Receive Carrier Sense Error */ + u32 rund; /* Receive Undersize Packet */ + u32 rovr; /* Receive Oversize Packet */ + u32 rfrg; /* Receive Fragments */ + u32 rjbr; /* Receive Jabber */ + u32 rdrp; /* Receive Drop */ /* Transmit Counters */ - uint tbyt; /* Transmit Byte Counter */ - uint tpkt; /* Transmit Packet */ - uint tmca; /* Transmit Multicast Packet */ - uint tbca; /* Transmit Broadcast Packet */ - uint txpf; /* Transmit Pause Control Frame */ - uint tdfr; /* Transmit Deferral Packet */ - uint tedf; /* Transmit Excessive Deferral Packet */ - uint tscl; /* Transmit Single Collision Packet */ + u32 tbyt; /* Transmit Byte Counter */ + u32 tpkt; /* Transmit Packet */ + u32 tmca; /* Transmit Multicast Packet */ + u32 tbca; /* Transmit Broadcast Packet */ + u32 txpf; /* Transmit Pause Control Frame */ + u32 tdfr; /* Transmit Deferral Packet */ + u32 tedf; /* Transmit Excessive Deferral Packet */ + u32 tscl; /* Transmit Single Collision Packet */ /* (0x2_n700) */ - uint tmcl; /* Transmit Multiple Collision Packet */ - uint tlcl; /* Transmit Late Collision Packet */ - uint txcl; /* Transmit Excessive Collision Packet */ - uint tncl; /* Transmit Total Collision */ - - uint res2; - - uint tdrp; /* Transmit Drop Frame */ - uint tjbr; /* Transmit Jabber Frame */ - uint tfcs; /* Transmit FCS Error */ - uint txcf; /* Transmit Control Frame */ - uint tovr; /* Transmit Oversize Frame */ - uint tund; /* Transmit Undersize Frame */ - uint tfrg; /* Transmit Fragments Frame */ + u32 tmcl; /* Transmit Multiple Collision Packet */ + u32 tlcl; /* Transmit Late Collision Packet */ + u32 txcl; /* Transmit Excessive Collision Packet */ + u32 tncl; /* Transmit Total Collision */ + + u32 res2; + + u32 tdrp; /* Transmit Drop Frame */ + u32 tjbr; /* Transmit Jabber Frame */ + u32 tfcs; /* Transmit FCS Error */ + u32 txcf; /* Transmit Control Frame */ + u32 tovr; /* Transmit Oversize Frame */ + u32 tund; /* Transmit Undersize Frame */ + u32 tfrg; /* Transmit Fragments Frame */ /* General Registers */ - uint car1; /* Carry Register One */ - uint car2; /* Carry Register Two */ - uint cam1; /* Carry Register One Mask */ - uint cam2; /* Carry Register Two Mask */ -} rmon_mib_t; - -typedef struct tsec_hash_regs -{ - uint iaddr0; /* Individual Address Register 0 */ - uint iaddr1; /* Individual Address Register 1 */ - uint iaddr2; /* Individual Address Register 2 */ - uint iaddr3; /* Individual Address Register 3 */ - uint iaddr4; /* Individual Address Register 4 */ - uint iaddr5; /* Individual Address Register 5 */ - uint iaddr6; /* Individual Address Register 6 */ - uint iaddr7; /* Individual Address Register 7 */ - uint res1[24]; - uint gaddr0; /* Group Address Register 0 */ - uint gaddr1; /* Group Address Register 1 */ - uint gaddr2; /* Group Address Register 2 */ - uint gaddr3; /* Group Address Register 3 */ - uint gaddr4; /* Group Address Register 4 */ - uint gaddr5; /* Group Address Register 5 */ - uint gaddr6; /* Group Address Register 6 */ - uint gaddr7; /* Group Address Register 7 */ - uint res2[24]; -} tsec_hash_t; - -typedef struct tsec -{ + u32 car1; /* Carry Register One */ + u32 car2; /* Carry Register Two */ + u32 cam1; /* Carry Register One Mask */ + u32 cam2; /* Carry Register Two Mask */ +}; + +struct tsec_hash_regs { + u32 iaddr0; /* Individual Address Register 0 */ + u32 iaddr1; /* Individual Address Register 1 */ + u32 iaddr2; /* Individual Address Register 2 */ + u32 iaddr3; /* Individual Address Register 3 */ + u32 iaddr4; /* Individual Address Register 4 */ + u32 iaddr5; /* Individual Address Register 5 */ + u32 iaddr6; /* Individual Address Register 6 */ + u32 iaddr7; /* Individual Address Register 7 */ + u32 res1[24]; + u32 gaddr0; /* Group Address Register 0 */ + u32 gaddr1; /* Group Address Register 1 */ + u32 gaddr2; /* Group Address Register 2 */ + u32 gaddr3; /* Group Address Register 3 */ + u32 gaddr4; /* Group Address Register 4 */ + u32 gaddr5; /* Group Address Register 5 */ + u32 gaddr6; /* Group Address Register 6 */ + u32 gaddr7; /* Group Address Register 7 */ + u32 res2[24]; +}; + +struct tsec { /* General Control and Status Registers (0x2_n000) */ - uint res000[4]; + u32 res000[4]; - uint ievent; /* Interrupt Event */ - uint imask; /* Interrupt Mask */ - uint edis; /* Error Disabled */ - uint res01c; - uint ecntrl; /* Ethernet Control */ - uint minflr; /* Minimum Frame Length */ - uint ptv; /* Pause Time Value */ - uint dmactrl; /* DMA Control */ - uint tbipa; /* TBI PHY Address */ + u32 ievent; /* Interrupt Event */ + u32 imask; /* Interrupt Mask */ + u32 edis; /* Error Disabled */ + u32 res01c; + u32 ecntrl; /* Ethernet Control */ + u32 minflr; /* Minimum Frame Length */ + u32 ptv; /* Pause Time Value */ + u32 dmactrl; /* DMA Control */ + u32 tbipa; /* TBI PHY Address */ - uint res034[3]; - uint res040[48]; + u32 res034[3]; + u32 res040[48]; /* Transmit Control and Status Registers (0x2_n100) */ - uint tctrl; /* Transmit Control */ - uint tstat; /* Transmit Status */ - uint res108; - uint tbdlen; /* Tx BD Data Length */ - uint res110[5]; - uint ctbptr; /* Current TxBD Pointer */ - uint res128[23]; - uint tbptr; /* TxBD Pointer */ - uint res188[30]; + u32 tctrl; /* Transmit Control */ + u32 tstat; /* Transmit Status */ + u32 res108; + u32 tbdlen; /* Tx BD Data Length */ + u32 res110[5]; + u32 ctbptr; /* Current TxBD Pointer */ + u32 res128[23]; + u32 tbptr; /* TxBD Pointer */ + u32 res188[30]; /* (0x2_n200) */ - uint res200; - uint tbase; /* TxBD Base Address */ - uint res208[42]; - uint ostbd; /* Out of Sequence TxBD */ - uint ostbdp; /* Out of Sequence Tx Data Buffer Pointer */ - uint res2b8[18]; + u32 res200; + u32 tbase; /* TxBD Base Address */ + u32 res208[42]; + u32 ostbd; /* Out of Sequence TxBD */ + u32 ostbdp; /* Out of Sequence Tx Data Buffer Pointer */ + u32 res2b8[18]; /* Receive Control and Status Registers (0x2_n300) */ - uint rctrl; /* Receive Control */ - uint rstat; /* Receive Status */ - uint res308; - uint rbdlen; /* RxBD Data Length */ - uint res310[4]; - uint res320; - uint crbptr; /* Current Receive Buffer Pointer */ - uint res328[6]; - uint mrblr; /* Maximum Receive Buffer Length */ - uint res344[16]; - uint rbptr; /* RxBD Pointer */ - uint res388[30]; + u32 rctrl; /* Receive Control */ + u32 rstat; /* Receive Status */ + u32 res308; + u32 rbdlen; /* RxBD Data Length */ + u32 res310[4]; + u32 res320; + u32 crbptr; /* Current Receive Buffer Pointer */ + u32 res328[6]; + u32 mrblr; /* Maximum Receive Buffer Length */ + u32 res344[16]; + u32 rbptr; /* RxBD Pointer */ + u32 res388[30]; /* (0x2_n400) */ - uint res400; - uint rbase; /* RxBD Base Address */ - uint res408[62]; + u32 res400; + u32 rbase; /* RxBD Base Address */ + u32 res408[62]; /* MAC Registers (0x2_n500) */ - uint maccfg1; /* MAC Configuration #1 */ - uint maccfg2; /* MAC Configuration #2 */ - uint ipgifg; /* Inter Packet Gap/Inter Frame Gap */ - uint hafdup; /* Half-duplex */ - uint maxfrm; /* Maximum Frame */ - uint res514; - uint res518; + u32 maccfg1; /* MAC Configuration #1 */ + u32 maccfg2; /* MAC Configuration #2 */ + u32 ipgifg; /* Inter Packet Gap/Inter Frame Gap */ + u32 hafdup; /* Half-duplex */ + u32 maxfrm; /* Maximum Frame */ + u32 res514; + u32 res518; - uint res51c; + u32 res51c; - uint resmdio[6]; + u32 resmdio[6]; - uint res538; + u32 res538; - uint ifstat; /* Interface Status */ - uint macstnaddr1; /* Station Address, part 1 */ - uint macstnaddr2; /* Station Address, part 2 */ - uint res548[46]; + u32 ifstat; /* Interface Status */ + u32 macstnaddr1; /* Station Address, part 1 */ + u32 macstnaddr2; /* Station Address, part 2 */ + u32 res548[46]; /* (0x2_n600) */ - uint res600[32]; + u32 res600[32]; /* RMON MIB Registers (0x2_n680-0x2_n73c) */ - rmon_mib_t rmon; - uint res740[48]; + struct tsec_rmon_mib rmon; + u32 res740[48]; /* Hash Function Registers (0x2_n800) */ - tsec_hash_t hash; + struct tsec_hash_regs hash; - uint res900[128]; + u32 res900[128]; /* Pattern Registers (0x2_nb00) */ - uint resb00[62]; - uint attr; /* Default Attribute Register */ - uint attreli; /* Default Attribute Extract Length and Index */ + u32 resb00[62]; + u32 attr; /* Default Attribute Register */ + u32 attreli; /* Default Attribute Extract Length and Index */ /* TSEC Future Expansion Space (0x2_nc00-0x2_nffc) */ - uint resc00[256]; -} tsec_t; + u32 resc00[256]; +}; #define TSEC_GIGABIT (1 << 0) @@ -383,8 +390,8 @@ typedef struct tsec #define TSEC_SGMII (1 << 2) /* MAC-PHY interface uses SGMII */ struct tsec_private { - tsec_t *regs; - struct tsec_mii_mng *phyregs_sgmii; + struct tsec __iomem *regs; + struct tsec_mii_mng __iomem *phyregs_sgmii; struct phy_device *phydev; phy_interface_t interface; struct mii_dev *bus; @@ -394,8 +401,8 @@ struct tsec_private { }; struct tsec_info_struct { - tsec_t *regs; - struct tsec_mii_mng *miiregs_sgmii; + struct tsec __iomem *regs; + struct tsec_mii_mng __iomem *miiregs_sgmii; char *devname; char *mii_devname; phy_interface_t interface; diff --git a/lib/Makefile b/lib/Makefile index 4e3b500f5a..e787f77be8 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -6,6 +6,13 @@ # ifndef CONFIG_SPL_BUILD + +obj-$(CONFIG_RSA) += rsa/ +obj-$(CONFIG_LZMA) += lzma/ +obj-$(CONFIG_LZO) += lzo/ +obj-$(CONFIG_ZLIB) += zlib/ +obj-$(CONFIG_TIZEN) += tizen/ + obj-$(CONFIG_AES) += aes.o obj-$(CONFIG_BZIP2) += bzlib.o obj-$(CONFIG_BZIP2) += bzlib_crctable.o diff --git a/lib/fdtdec.c b/lib/fdtdec.c index 51fa868333..207314fa72 100644 --- a/lib/fdtdec.c +++ b/lib/fdtdec.c @@ -86,10 +86,10 @@ fdt_addr_t fdtdec_get_addr_size(const void *blob, int node, size = (fdt_size_t *)((char *)cell + sizeof(fdt_addr_t)); *sizep = fdt_size_to_cpu(*size); - debug("addr=%p, size=%p\n", (void *)addr, - (void *)*sizep); + debug("addr=%08lx, size=%08x\n", + (ulong)addr, *sizep); } else { - debug("%p\n", (void *)addr); + debug("%08lx\n", (ulong)addr); } return addr; } @@ -611,7 +611,7 @@ int fdtdec_decode_region(const void *blob, int node, if (!cell || (len != sizeof(fdt_addr_t) * 2)) return -1; - *ptrp = (void *)fdt_addr_to_cpu(*cell); + *ptrp = map_sysmem(fdt_addr_to_cpu(*cell), *size); *size = fdt_size_to_cpu(cell[1]); debug("%s: size=%zx\n", __func__, *size); return 0; diff --git a/lib/lzma/Makefile b/lib/lzma/Makefile index 25c6797fb6..f8eda06c9f 100644 --- a/lib/lzma/Makefile +++ b/lib/lzma/Makefile @@ -10,4 +10,4 @@ CFLAGS += -D_LZMA_PROB32 -obj-$(CONFIG_LZMA) += LzmaDec.o LzmaTools.o +obj-y += LzmaDec.o LzmaTools.o diff --git a/lib/lzo/Makefile b/lib/lzo/Makefile index dd853eae23..2936544abc 100644 --- a/lib/lzo/Makefile +++ b/lib/lzo/Makefile @@ -5,4 +5,4 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-$(CONFIG_LZO) += lzo1x_decompress.o +obj-y += lzo1x_decompress.o diff --git a/lib/rsa/Makefile b/lib/rsa/Makefile index 693c745514..164ab39964 100644 --- a/lib/rsa/Makefile +++ b/lib/rsa/Makefile @@ -7,6 +7,4 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifdef CONFIG_FIT_SIGNATURE -obj-$(CONFIG_RSA) += rsa-verify.o -endif +obj-$(CONFIG_FIT_SIGNATURE) += rsa-verify.o diff --git a/lib/time.c b/lib/time.c index 111b493a42..09bb05a24d 100644 --- a/lib/time.c +++ b/lib/time.c @@ -51,7 +51,7 @@ unsigned long long __weak notrace get_ticks(void) return ((unsigned long long)gd->timebase_h << 32) | gd->timebase_l; } -static unsigned long long notrace tick_to_time(unsigned long long tick) +static unsigned long long notrace tick_to_time(uint64_t tick) { unsigned int div = get_tbclk(); @@ -71,7 +71,7 @@ unsigned long __weak notrace timer_get_us(void) } static unsigned long long usec_to_tick(unsigned long usec) { - unsigned long long tick = usec * get_tbclk(); + uint64_t tick = usec * get_tbclk(); usec *= get_tbclk(); do_div(tick, 1000000); return tick; diff --git a/lib/zlib/Makefile b/lib/zlib/Makefile index 1e9e04d991..2fba95f438 100644 --- a/lib/zlib/Makefile +++ b/lib/zlib/Makefile @@ -5,4 +5,4 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-$(CONFIG_ZLIB) += zlib.o +obj-y += zlib.o diff --git a/nand_spl/board/amcc/acadia/Makefile b/nand_spl/board/amcc/acadia/Makefile index 20459c92e2..022a20555f 100644 --- a/nand_spl/board/amcc/acadia/Makefile +++ b/nand_spl/board/amcc/acadia/Makefile @@ -24,11 +24,9 @@ OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) __OBJS := $(SOBJS) $(COBJS) LNDIR := $(nandobj)board/$(BOARDDIR) -ALL = $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin \ +all: $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin \ $(nandobj)System.map -all: $(obj).depend $(ALL) - $(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@ @@ -37,13 +35,12 @@ $(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot.lds cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) $(PLATFORM_LIBS) \ - -Map $(nandobj)u-boot-spl.map \ - -o $(nandobj)u-boot-spl + -Map $(nandobj)u-boot-spl.map -o $@ $(nandobj)System.map: $(nandobj)u-boot-spl @$(NM) $< | \ grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \ - sort > $(nandobj)System.map + sort > $@ $(nandobj)u-boot.lds: $(LDSCRIPT) $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@ @@ -52,43 +49,43 @@ $(nandobj)u-boot.lds: $(LDSCRIPT) # from cpu directory $(obj)cache.S: - @rm -f $(obj)cache.S - ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/cache.S $(obj)cache.S + @rm -f $@ + ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/cache.S $@ $(obj)gpio.c: - @rm -f $(obj)gpio.c - ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/gpio.c $(obj)gpio.c + @rm -f $@ + ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/gpio.c $@ $(obj)ndfc.c: - @rm -f $(obj)ndfc.c - ln -s $(SRCTREE)/drivers/mtd/nand/ndfc.c $(obj)ndfc.c + @rm -f $@ + ln -s $(SRCTREE)/drivers/mtd/nand/ndfc.c $@ $(obj)resetvec.S: - @rm -f $(obj)resetvec.S - ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/resetvec.S $(obj)resetvec.S + @rm -f $@ + ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/resetvec.S $@ $(obj)start.S: - @rm -f $(obj)start.S - ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/start.S $(obj)start.S + @rm -f $@ + ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/start.S $@ # from board directory $(obj)memory.c: - @rm -f $(obj)memory.c - ln -s $(SRCTREE)/board/amcc/acadia/memory.c $(obj)memory.c + @rm -f $@ + ln -s $(SRCTREE)/board/amcc/acadia/memory.c $@ $(obj)pll.c: - @rm -f $(obj)pll.c - ln -s $(SRCTREE)/board/amcc/acadia/pll.c $(obj)pll.c + @rm -f $@ + ln -s $(SRCTREE)/board/amcc/acadia/pll.c $@ # from nand_spl directory $(obj)nand_boot.c: - @rm -f $(obj)nand_boot.c - ln -s $(SRCTREE)/nand_spl/nand_boot.c $(obj)nand_boot.c + @rm -f $@ + ln -s $(SRCTREE)/nand_spl/nand_boot.c $@ # from drivers/mtd/nand directory $(obj)nand_ecc.c: - @rm -f $(obj)nand_ecc.c - ln -s $(SRCTREE)/drivers/mtd/nand/nand_ecc.c $(obj)nand_ecc.c + @rm -f $@ + ln -s $(SRCTREE)/drivers/mtd/nand/nand_ecc.c $@ ######################################################################### diff --git a/nand_spl/board/amcc/bamboo/Makefile b/nand_spl/board/amcc/bamboo/Makefile index ca3dab4f25..d413a480ad 100644 --- a/nand_spl/board/amcc/bamboo/Makefile +++ b/nand_spl/board/amcc/bamboo/Makefile @@ -24,9 +24,7 @@ OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) __OBJS := $(SOBJS) $(COBJS) LNDIR := $(nandobj)board/$(BOARDDIR) -ALL = $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin - -all: $(obj).depend $(ALL) +all: $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin $(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@ @@ -36,8 +34,7 @@ $(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot.lds cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) $(PLATFORM_LIBS) \ - -Map $(nandobj)u-boot-spl.map \ - -o $(nandobj)u-boot-spl + -Map $(nandobj)u-boot-spl.map -o $@ $(nandobj)u-boot.lds: $(LDSCRIPT) $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@ @@ -46,36 +43,36 @@ $(nandobj)u-boot.lds: $(LDSCRIPT) # from cpu directory $(obj)ndfc.c: - @rm -f $(obj)ndfc.c - ln -s $(SRCTREE)/drivers/mtd/nand/ndfc.c $(obj)ndfc.c + @rm -f $@ + ln -s $(SRCTREE)/drivers/mtd/nand/ndfc.c $@ $(obj)resetvec.S: - @rm -f $(obj)resetvec.S - ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/resetvec.S $(obj)resetvec.S + @rm -f $@ + ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/resetvec.S $@ $(obj)start.S: - @rm -f $(obj)start.S - ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/start.S $(obj)start.S + @rm -f $@ + ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/start.S $@ # from board directory $(obj)init.S: - @rm -f $(obj)init.S - ln -s $(SRCTREE)/board/amcc/bamboo/init.S $(obj)init.S + @rm -f $@ + ln -s $(SRCTREE)/board/amcc/bamboo/init.S $@ # from nand_spl directory $(obj)nand_boot.c: - @rm -f $(obj)nand_boot.c - ln -s $(SRCTREE)/nand_spl/nand_boot.c $(obj)nand_boot.c + @rm -f $@ + ln -s $(SRCTREE)/nand_spl/nand_boot.c $@ # from drivers/mtd/nand directory $(obj)nand_ecc.c: - @rm -f $(obj)nand_ecc.c - ln -s $(SRCTREE)/drivers/mtd/nand/nand_ecc.c $(obj)nand_ecc.c + @rm -f $@ + ln -s $(SRCTREE)/drivers/mtd/nand/nand_ecc.c $@ ifneq ($(OBJTREE), $(SRCTREE)) $(obj)sdram.c: - @rm -f $(obj)sdram.c - ln -s $(SRCTREE)/nand_spl/board/$(BOARDDIR)/sdram.c $(obj)sdram.c + @rm -f $@ + ln -s $(SRCTREE)/nand_spl/board/$(BOARDDIR)/sdram.c $@ endif ######################################################################### diff --git a/nand_spl/board/amcc/canyonlands/Makefile b/nand_spl/board/amcc/canyonlands/Makefile index f50d84b8c9..b2ef03f78b 100644 --- a/nand_spl/board/amcc/canyonlands/Makefile +++ b/nand_spl/board/amcc/canyonlands/Makefile @@ -29,9 +29,7 @@ OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) __OBJS := $(SOBJS) $(COBJS) LNDIR := $(nandobj)board/$(BOARDDIR) -ALL = $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin - -all: $(obj).depend $(ALL) +all: $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin $(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@ @@ -41,8 +39,7 @@ $(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot.lds cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) $(PLATFORM_LIBS) \ - -Map $(nandobj)u-boot-spl.map \ - -o $(nandobj)u-boot-spl + -Map $(nandobj)u-boot-spl.map -o $@ $(nandobj)u-boot.lds: $(LDSCRIPT) $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@ @@ -51,36 +48,36 @@ $(nandobj)u-boot.lds: $(LDSCRIPT) # from cpu directory $(obj)ndfc.c: - @rm -f $(obj)ndfc.c - ln -s $(SRCTREE)/drivers/mtd/nand/ndfc.c $(obj)ndfc.c + @rm -f $@ + ln -s $(SRCTREE)/drivers/mtd/nand/ndfc.c $@ $(obj)resetvec.S: - @rm -f $(obj)resetvec.S - ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/resetvec.S $(obj)resetvec.S + @rm -f $@ + ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/resetvec.S $@ $(obj)start.S: - @rm -f $(obj)start.S - ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/start.S $(obj)start.S + @rm -f $@ + ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/start.S $@ # from board directory $(obj)init.S: - @rm -f $(obj)init.S - ln -s $(SRCTREE)/board/amcc/canyonlands/init.S $(obj)init.S + @rm -f $@ + ln -s $(SRCTREE)/board/amcc/canyonlands/init.S $@ # from nand_spl directory $(obj)nand_boot.c: - @rm -f $(obj)nand_boot.c - ln -s $(SRCTREE)/nand_spl/nand_boot.c $(obj)nand_boot.c + @rm -f $@ + ln -s $(SRCTREE)/nand_spl/nand_boot.c $@ # from drivers/mtd/nand directory $(obj)nand_ecc.c: - @rm -f $(obj)nand_ecc.c - ln -s $(SRCTREE)/drivers/mtd/nand/nand_ecc.c $(obj)nand_ecc.c + @rm -f $@ + ln -s $(SRCTREE)/drivers/mtd/nand/nand_ecc.c $@ ifneq ($(OBJTREE), $(SRCTREE)) $(obj)ddr2_fixed.c: - @rm -f $(obj)ddr2_fixed.c - ln -s $(SRCTREE)/nand_spl/board/$(BOARDDIR)/ddr2_fixed.c $(obj)ddr2_fixed.c + @rm -f $@ + ln -s $(SRCTREE)/nand_spl/board/$(BOARDDIR)/ddr2_fixed.c $@ endif ######################################################################### diff --git a/nand_spl/board/amcc/kilauea/Makefile b/nand_spl/board/amcc/kilauea/Makefile index 8b4206f57b..5899b9efe8 100644 --- a/nand_spl/board/amcc/kilauea/Makefile +++ b/nand_spl/board/amcc/kilauea/Makefile @@ -24,9 +24,7 @@ OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) __OBJS := $(SOBJS) $(COBJS) LNDIR := $(nandobj)board/$(BOARDDIR) -ALL = $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin - -all: $(obj).depend $(ALL) +all: $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin $(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@ @@ -36,8 +34,7 @@ $(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot.lds cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) $(PLATFORM_LIBS) \ - -Map $(nandobj)u-boot-spl.map \ - -o $(nandobj)u-boot-spl + -Map $(nandobj)u-boot-spl.map -o $@ $(nandobj)u-boot.lds: $(LDSCRIPT) $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@ @@ -46,38 +43,38 @@ $(nandobj)u-boot.lds: $(LDSCRIPT) # from cpu directory $(obj)44x_spd_ddr2.c: $(obj)ecc.h - @rm -f $(obj)44x_spd_ddr2.c - ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c $(obj)44x_spd_ddr2.c + @rm -f $@ + ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c $@ $(obj)cache.S: - @rm -f $(obj)cache.S - ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/cache.S $(obj)cache.S + @rm -f $@ + ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/cache.S $@ $(obj)ecc.h: - @rm -f $(obj)ecc.h - ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/ecc.h $(obj)ecc.h + @rm -f $@ + ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/ecc.h $@ $(obj)ndfc.c: - @rm -f $(obj)ndfc.c - ln -s $(SRCTREE)/drivers/mtd/nand/ndfc.c $(obj)ndfc.c + @rm -f $@ + ln -s $(SRCTREE)/drivers/mtd/nand/ndfc.c $@ $(obj)resetvec.S: - @rm -f $(obj)resetvec.S - ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/resetvec.S $(obj)resetvec.S + @rm -f $@ + ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/resetvec.S $@ $(obj)start.S: - @rm -f $(obj)start.S - ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/start.S $(obj)start.S + @rm -f $@ + ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/start.S $@ # from nand_spl directory $(obj)nand_boot.c: - @rm -f $(obj)nand_boot.c - ln -s $(SRCTREE)/nand_spl/nand_boot.c $(obj)nand_boot.c + @rm -f $@ + ln -s $(SRCTREE)/nand_spl/nand_boot.c $@ # from drivers/nand directory $(obj)nand_ecc.c: - @rm -f $(obj)nand_ecc.c - ln -s $(SRCTREE)/drivers/mtd/nand/nand_ecc.c $(obj)nand_ecc.c + @rm -f $@ + ln -s $(SRCTREE)/drivers/mtd/nand/nand_ecc.c $@ ######################################################################### diff --git a/nand_spl/board/amcc/sequoia/Makefile b/nand_spl/board/amcc/sequoia/Makefile index 0fcf030d43..fea6c4e489 100644 --- a/nand_spl/board/amcc/sequoia/Makefile +++ b/nand_spl/board/amcc/sequoia/Makefile @@ -24,9 +24,7 @@ OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) __OBJS := $(SOBJS) $(COBJS) LNDIR := $(nandobj)board/$(BOARDDIR) -ALL = $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin - -all: $(obj).depend $(ALL) +all: $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin $(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@ @@ -36,8 +34,7 @@ $(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot.lds cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) $(PLATFORM_LIBS) \ - -Map $(nandobj)u-boot-spl.map \ - -o $(nandobj)u-boot-spl + -Map $(nandobj)u-boot-spl.map -o $@ $(nandobj)u-boot.lds: $(LDSCRIPT) $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@ @@ -46,41 +43,41 @@ $(nandobj)u-boot.lds: $(LDSCRIPT) # from cpu directory $(obj)denali_data_eye.c: - @rm -f $(obj)denali_data_eye.c - ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/denali_data_eye.c $(obj)denali_data_eye.c + @rm -f $@ + ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/denali_data_eye.c $@ $(obj)ndfc.c: - @rm -f $(obj)ndfc.c - ln -s $(SRCTREE)/drivers/mtd/nand/ndfc.c $(obj)ndfc.c + @rm -f $@ + ln -s $(SRCTREE)/drivers/mtd/nand/ndfc.c $@ $(obj)resetvec.S: - @rm -f $(obj)resetvec.S - ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/resetvec.S $(obj)resetvec.S + @rm -f $@ + ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/resetvec.S $@ $(obj)start.S: - @rm -f $(obj)start.S - ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/start.S $(obj)start.S + @rm -f $@ + ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/start.S $@ # from board directory $(obj)init.S: - @rm -f $(obj)init.S - ln -s $(SRCTREE)/board/amcc/sequoia/init.S $(obj)init.S + @rm -f $@ + ln -s $(SRCTREE)/board/amcc/sequoia/init.S $@ $(obj)sdram.c: - @rm -f $(obj)sdram.c + @rm -f $@ @rm -f $(obj)sdram.h - ln -s $(SRCTREE)/board/amcc/sequoia/sdram.c $(obj)sdram.c + ln -s $(SRCTREE)/board/amcc/sequoia/sdram.c $@ ln -s $(SRCTREE)/board/amcc/sequoia/sdram.h $(obj)sdram.h # from nand_spl directory $(obj)nand_boot.c: - @rm -f $(obj)nand_boot.c - ln -s $(SRCTREE)/nand_spl/nand_boot.c $(obj)nand_boot.c + @rm -f $@ + ln -s $(SRCTREE)/nand_spl/nand_boot.c $@ # from drivers/mtd/nand directory $(obj)nand_ecc.c: - @rm -f $(obj)nand_ecc.c - ln -s $(SRCTREE)/drivers/mtd/nand/nand_ecc.c $(obj)nand_ecc.c + @rm -f $@ + ln -s $(SRCTREE)/drivers/mtd/nand/nand_ecc.c $@ ######################################################################### diff --git a/nand_spl/board/freescale/mpc8315erdb/Makefile b/nand_spl/board/freescale/mpc8315erdb/Makefile index 5b11d1067e..c49a6e0b8f 100644 --- a/nand_spl/board/freescale/mpc8315erdb/Makefile +++ b/nand_spl/board/freescale/mpc8315erdb/Makefile @@ -28,9 +28,7 @@ OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) __OBJS := $(SOBJS) $(COBJS) LNDIR := $(nandobj)board/$(BOARDDIR) -ALL = $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin - -all: $(obj).depend $(ALL) +all: $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin $(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@ @@ -40,8 +38,7 @@ $(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot.lds cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) $(PLATFORM_LIBS) \ - -Map $(nandobj)u-boot-spl.map \ - -o $(nandobj)u-boot-spl + -Map $(nandobj)u-boot-spl.map -o $@ $(nandobj)u-boot.lds: $(LDSCRIPT) $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@ @@ -49,32 +46,31 @@ $(nandobj)u-boot.lds: $(LDSCRIPT) # create symbolic links for common files $(obj)start.S: - ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc83xx/start.S $(obj)start.S + ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc83xx/start.S $@ $(obj)nand_boot_fsl_elbc.c: - ln -sf $(SRCTREE)/nand_spl/nand_boot_fsl_elbc.c \ - $(obj)nand_boot_fsl_elbc.c + ln -sf $(SRCTREE)/nand_spl/nand_boot_fsl_elbc.c $@ $(obj)sdram.c: - ln -sf $(SRCTREE)/board/$(BOARDDIR)/sdram.c $(obj)sdram.c + ln -sf $(SRCTREE)/board/$(BOARDDIR)/sdram.c $@ $(obj)$(BOARD).c: - ln -sf $(SRCTREE)/board/$(BOARDDIR)/$(BOARD).c $(obj)$(BOARD).c + ln -sf $(SRCTREE)/board/$(BOARDDIR)/$(BOARD).c $@ $(obj)ns16550.c: - ln -sf $(SRCTREE)/drivers/serial/ns16550.c $(obj)ns16550.c + ln -sf $(SRCTREE)/drivers/serial/ns16550.c $@ $(obj)spl_minimal.c: - ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc83xx/spl_minimal.c $(obj)spl_minimal.c + ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc83xx/spl_minimal.c $@ $(obj)cache.c: - ln -sf $(SRCTREE)/arch/powerpc/lib/cache.c $(obj)cache.c + ln -sf $(SRCTREE)/arch/powerpc/lib/cache.c $@ $(obj)time.c: - ln -sf $(SRCTREE)/arch/powerpc/lib/time.c $(obj)time.c + ln -sf $(SRCTREE)/arch/powerpc/lib/time.c $@ $(obj)ticks.S: - ln -sf $(SRCTREE)/arch/powerpc/lib/ticks.S $(obj)ticks.S + ln -sf $(SRCTREE)/arch/powerpc/lib/ticks.S $@ ######################################################################### diff --git a/nand_spl/board/freescale/mpc8536ds/Makefile b/nand_spl/board/freescale/mpc8536ds/Makefile index d3dac2074c..62330815cc 100644 --- a/nand_spl/board/freescale/mpc8536ds/Makefile +++ b/nand_spl/board/freescale/mpc8536ds/Makefile @@ -30,9 +30,7 @@ OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) __OBJS := $(SOBJS) $(COBJS) LNDIR := $(nandobj)board/$(BOARDDIR) -ALL = $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin - -all: $(obj).depend $(ALL) +all: $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin $(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@ @@ -42,8 +40,7 @@ $(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) $(PLATFORM_LIBS) \ - -Map $(nandobj)u-boot-spl.map \ - -o $(nandobj)u-boot-spl + -Map $(nandobj)u-boot-spl.map -o $@ $(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \ @@ -52,58 +49,57 @@ $(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) # create symbolic links for common files $(obj)cache.c: - @rm -f $(obj)cache.c - ln -sf $(SRCTREE)/arch/powerpc/lib/cache.c $(obj)cache.c + @rm -f $@ + ln -sf $(SRCTREE)/arch/powerpc/lib/cache.c $@ $(obj)cpu_init_early.c: - @rm -f $(obj)cpu_init_early.c - ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/cpu_init_early.c $(obj)cpu_init_early.c + @rm -f $@ + ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/cpu_init_early.c $@ $(obj)spl_minimal.c: - @rm -f $(obj)spl_minimal.c - ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/spl_minimal.c $(obj)spl_minimal.c + @rm -f $@ + ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/spl_minimal.c $@ $(obj)fsl_law.c: - @rm -f $(obj)fsl_law.c - ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc8xxx/law.c $(obj)fsl_law.c + @rm -f $@ + ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc8xxx/law.c $@ $(obj)law.c: - @rm -f $(obj)law.c - ln -sf $(SRCTREE)/board/$(BOARDDIR)/law.c $(obj)law.c + @rm -f $@ + ln -sf $(SRCTREE)/board/$(BOARDDIR)/law.c $@ $(obj)nand_boot_fsl_elbc.c: - @rm -f $(obj)nand_boot_fsl_elbc.c - ln -sf $(SRCTREE)/nand_spl/nand_boot_fsl_elbc.c \ - $(obj)nand_boot_fsl_elbc.c + @rm -f $@ + ln -sf $(SRCTREE)/nand_spl/nand_boot_fsl_elbc.c $@ $(obj)ns16550.c: - @rm -f $(obj)ns16550.c - ln -sf $(SRCTREE)/drivers/serial/ns16550.c $(obj)ns16550.c + @rm -f $@ + ln -sf $(SRCTREE)/drivers/serial/ns16550.c $@ $(obj)resetvec.S: - @rm -f $(obj)resetvec.S - ln -s $(SRCTREE)/$(CPUDIR)/resetvec.S $(obj)resetvec.S + @rm -f $@ + ln -s $(SRCTREE)/$(CPUDIR)/resetvec.S $@ $(obj)fixed_ivor.S: - @rm -f $(obj)fixed_ivor.S - ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/fixed_ivor.S $(obj)fixed_ivor.S + @rm -f $@ + ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/fixed_ivor.S $@ $(obj)start.S: $(obj)fixed_ivor.S - @rm -f $(obj)start.S - ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/start.S $(obj)start.S + @rm -f $@ + ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/start.S $@ $(obj)tlb.c: - @rm -f $(obj)tlb.c - ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/tlb.c $(obj)tlb.c + @rm -f $@ + ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/tlb.c $@ $(obj)tlb_table.c: - @rm -f $(obj)tlb_table.c - ln -sf $(SRCTREE)/board/$(BOARDDIR)/tlb.c $(obj)tlb_table.c + @rm -f $@ + ln -sf $(SRCTREE)/board/$(BOARDDIR)/tlb.c $@ ifneq ($(OBJTREE), $(SRCTREE)) $(obj)nand_boot.c: - @rm -f $(obj)nand_boot.c - ln -s $(SRCTREE)/nand_spl/board/$(BOARDDIR)/nand_boot.c $(obj)nand_boot.c + @rm -f $@ + ln -s $(SRCTREE)/nand_spl/board/$(BOARDDIR)/nand_boot.c $@ endif ######################################################################### diff --git a/nand_spl/board/freescale/mpc8569mds/Makefile b/nand_spl/board/freescale/mpc8569mds/Makefile index d3dac2074c..62330815cc 100644 --- a/nand_spl/board/freescale/mpc8569mds/Makefile +++ b/nand_spl/board/freescale/mpc8569mds/Makefile @@ -30,9 +30,7 @@ OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) __OBJS := $(SOBJS) $(COBJS) LNDIR := $(nandobj)board/$(BOARDDIR) -ALL = $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin - -all: $(obj).depend $(ALL) +all: $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin $(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@ @@ -42,8 +40,7 @@ $(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) $(PLATFORM_LIBS) \ - -Map $(nandobj)u-boot-spl.map \ - -o $(nandobj)u-boot-spl + -Map $(nandobj)u-boot-spl.map -o $@ $(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \ @@ -52,58 +49,57 @@ $(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) # create symbolic links for common files $(obj)cache.c: - @rm -f $(obj)cache.c - ln -sf $(SRCTREE)/arch/powerpc/lib/cache.c $(obj)cache.c + @rm -f $@ + ln -sf $(SRCTREE)/arch/powerpc/lib/cache.c $@ $(obj)cpu_init_early.c: - @rm -f $(obj)cpu_init_early.c - ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/cpu_init_early.c $(obj)cpu_init_early.c + @rm -f $@ + ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/cpu_init_early.c $@ $(obj)spl_minimal.c: - @rm -f $(obj)spl_minimal.c - ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/spl_minimal.c $(obj)spl_minimal.c + @rm -f $@ + ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/spl_minimal.c $@ $(obj)fsl_law.c: - @rm -f $(obj)fsl_law.c - ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc8xxx/law.c $(obj)fsl_law.c + @rm -f $@ + ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc8xxx/law.c $@ $(obj)law.c: - @rm -f $(obj)law.c - ln -sf $(SRCTREE)/board/$(BOARDDIR)/law.c $(obj)law.c + @rm -f $@ + ln -sf $(SRCTREE)/board/$(BOARDDIR)/law.c $@ $(obj)nand_boot_fsl_elbc.c: - @rm -f $(obj)nand_boot_fsl_elbc.c - ln -sf $(SRCTREE)/nand_spl/nand_boot_fsl_elbc.c \ - $(obj)nand_boot_fsl_elbc.c + @rm -f $@ + ln -sf $(SRCTREE)/nand_spl/nand_boot_fsl_elbc.c $@ $(obj)ns16550.c: - @rm -f $(obj)ns16550.c - ln -sf $(SRCTREE)/drivers/serial/ns16550.c $(obj)ns16550.c + @rm -f $@ + ln -sf $(SRCTREE)/drivers/serial/ns16550.c $@ $(obj)resetvec.S: - @rm -f $(obj)resetvec.S - ln -s $(SRCTREE)/$(CPUDIR)/resetvec.S $(obj)resetvec.S + @rm -f $@ + ln -s $(SRCTREE)/$(CPUDIR)/resetvec.S $@ $(obj)fixed_ivor.S: - @rm -f $(obj)fixed_ivor.S - ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/fixed_ivor.S $(obj)fixed_ivor.S + @rm -f $@ + ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/fixed_ivor.S $@ $(obj)start.S: $(obj)fixed_ivor.S - @rm -f $(obj)start.S - ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/start.S $(obj)start.S + @rm -f $@ + ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/start.S $@ $(obj)tlb.c: - @rm -f $(obj)tlb.c - ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/tlb.c $(obj)tlb.c + @rm -f $@ + ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/tlb.c $@ $(obj)tlb_table.c: - @rm -f $(obj)tlb_table.c - ln -sf $(SRCTREE)/board/$(BOARDDIR)/tlb.c $(obj)tlb_table.c + @rm -f $@ + ln -sf $(SRCTREE)/board/$(BOARDDIR)/tlb.c $@ ifneq ($(OBJTREE), $(SRCTREE)) $(obj)nand_boot.c: - @rm -f $(obj)nand_boot.c - ln -s $(SRCTREE)/nand_spl/board/$(BOARDDIR)/nand_boot.c $(obj)nand_boot.c + @rm -f $@ + ln -s $(SRCTREE)/nand_spl/board/$(BOARDDIR)/nand_boot.c $@ endif ######################################################################### diff --git a/nand_spl/board/freescale/mpc8569mds/nand_boot.c b/nand_spl/board/freescale/mpc8569mds/nand_boot.c index 716b737ad2..ce7f6191ca 100644 --- a/nand_spl/board/freescale/mpc8569mds/nand_boot.c +++ b/nand_spl/board/freescale/mpc8569mds/nand_boot.c @@ -10,7 +10,7 @@ #include <nand.h> #include <asm/mmu.h> #include <asm/immap_85xx.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <asm/fsl_law.h> #define SYSCLK_66 66666666 diff --git a/nand_spl/board/freescale/mpc8572ds/Makefile b/nand_spl/board/freescale/mpc8572ds/Makefile index d3dac2074c..62330815cc 100644 --- a/nand_spl/board/freescale/mpc8572ds/Makefile +++ b/nand_spl/board/freescale/mpc8572ds/Makefile @@ -30,9 +30,7 @@ OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) __OBJS := $(SOBJS) $(COBJS) LNDIR := $(nandobj)board/$(BOARDDIR) -ALL = $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin - -all: $(obj).depend $(ALL) +all: $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin $(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@ @@ -42,8 +40,7 @@ $(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) $(PLATFORM_LIBS) \ - -Map $(nandobj)u-boot-spl.map \ - -o $(nandobj)u-boot-spl + -Map $(nandobj)u-boot-spl.map -o $@ $(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \ @@ -52,58 +49,57 @@ $(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) # create symbolic links for common files $(obj)cache.c: - @rm -f $(obj)cache.c - ln -sf $(SRCTREE)/arch/powerpc/lib/cache.c $(obj)cache.c + @rm -f $@ + ln -sf $(SRCTREE)/arch/powerpc/lib/cache.c $@ $(obj)cpu_init_early.c: - @rm -f $(obj)cpu_init_early.c - ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/cpu_init_early.c $(obj)cpu_init_early.c + @rm -f $@ + ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/cpu_init_early.c $@ $(obj)spl_minimal.c: - @rm -f $(obj)spl_minimal.c - ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/spl_minimal.c $(obj)spl_minimal.c + @rm -f $@ + ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/spl_minimal.c $@ $(obj)fsl_law.c: - @rm -f $(obj)fsl_law.c - ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc8xxx/law.c $(obj)fsl_law.c + @rm -f $@ + ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc8xxx/law.c $@ $(obj)law.c: - @rm -f $(obj)law.c - ln -sf $(SRCTREE)/board/$(BOARDDIR)/law.c $(obj)law.c + @rm -f $@ + ln -sf $(SRCTREE)/board/$(BOARDDIR)/law.c $@ $(obj)nand_boot_fsl_elbc.c: - @rm -f $(obj)nand_boot_fsl_elbc.c - ln -sf $(SRCTREE)/nand_spl/nand_boot_fsl_elbc.c \ - $(obj)nand_boot_fsl_elbc.c + @rm -f $@ + ln -sf $(SRCTREE)/nand_spl/nand_boot_fsl_elbc.c $@ $(obj)ns16550.c: - @rm -f $(obj)ns16550.c - ln -sf $(SRCTREE)/drivers/serial/ns16550.c $(obj)ns16550.c + @rm -f $@ + ln -sf $(SRCTREE)/drivers/serial/ns16550.c $@ $(obj)resetvec.S: - @rm -f $(obj)resetvec.S - ln -s $(SRCTREE)/$(CPUDIR)/resetvec.S $(obj)resetvec.S + @rm -f $@ + ln -s $(SRCTREE)/$(CPUDIR)/resetvec.S $@ $(obj)fixed_ivor.S: - @rm -f $(obj)fixed_ivor.S - ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/fixed_ivor.S $(obj)fixed_ivor.S + @rm -f $@ + ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/fixed_ivor.S $@ $(obj)start.S: $(obj)fixed_ivor.S - @rm -f $(obj)start.S - ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/start.S $(obj)start.S + @rm -f $@ + ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/start.S $@ $(obj)tlb.c: - @rm -f $(obj)tlb.c - ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/tlb.c $(obj)tlb.c + @rm -f $@ + ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/tlb.c $@ $(obj)tlb_table.c: - @rm -f $(obj)tlb_table.c - ln -sf $(SRCTREE)/board/$(BOARDDIR)/tlb.c $(obj)tlb_table.c + @rm -f $@ + ln -sf $(SRCTREE)/board/$(BOARDDIR)/tlb.c $@ ifneq ($(OBJTREE), $(SRCTREE)) $(obj)nand_boot.c: - @rm -f $(obj)nand_boot.c - ln -s $(SRCTREE)/nand_spl/board/$(BOARDDIR)/nand_boot.c $(obj)nand_boot.c + @rm -f $@ + ln -s $(SRCTREE)/nand_spl/board/$(BOARDDIR)/nand_boot.c $@ endif ######################################################################### diff --git a/nand_spl/board/freescale/p1023rds/Makefile b/nand_spl/board/freescale/p1023rds/Makefile index e89d4054ab..dbdfa19895 100644 --- a/nand_spl/board/freescale/p1023rds/Makefile +++ b/nand_spl/board/freescale/p1023rds/Makefile @@ -25,9 +25,7 @@ OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) __OBJS := $(SOBJS) $(COBJS) LNDIR := $(nandobj)board/$(BOARDDIR) -ALL = $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin - -all: $(obj).depend $(ALL) +all: $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin $(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@ @@ -37,8 +35,7 @@ $(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) $(PLATFORM_LIBS) \ - -Map $(nandobj)u-boot-spl.map \ - -o $(nandobj)u-boot-spl + -Map $(nandobj)u-boot-spl.map -o $@ $(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \ @@ -47,58 +44,57 @@ $(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) # create symbolic links for common files $(obj)cache.c: - @rm -f $(obj)cache.c - ln -sf $(SRCTREE)/arch/powerpc/lib/cache.c $(obj)cache.c + @rm -f $@ + ln -sf $(SRCTREE)/arch/powerpc/lib/cache.c $@ $(obj)cpu_init_early.c: - @rm -f $(obj)cpu_init_early.c - ln -sf $(SRCTREE)/$(CPUDIR)/cpu_init_early.c $(obj)cpu_init_early.c + @rm -f $@ + ln -sf $(SRCTREE)/$(CPUDIR)/cpu_init_early.c $@ $(obj)spl_minimal.c: - @rm -f $(obj)spl_minimal.c - ln -sf $(SRCTREE)/$(CPUDIR)/spl_minimal.c $(obj)spl_minimal.c + @rm -f $@ + ln -sf $(SRCTREE)/$(CPUDIR)/spl_minimal.c $@ $(obj)fsl_law.c: - @rm -f $(obj)fsl_law.c - ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc8xxx/law.c $(obj)fsl_law.c + @rm -f $@ + ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc8xxx/law.c $@ $(obj)law.c: - @rm -f $(obj)law.c - ln -sf $(SRCTREE)/board/$(BOARDDIR)/law.c $(obj)law.c + @rm -f $@ + ln -sf $(SRCTREE)/board/$(BOARDDIR)/law.c $@ $(obj)nand_boot_fsl_elbc.c: - @rm -f $(obj)nand_boot_fsl_elbc.c - ln -sf $(SRCTREE)/nand_spl/nand_boot_fsl_elbc.c \ - $(obj)nand_boot_fsl_elbc.c + @rm -f $@ + ln -sf $(SRCTREE)/nand_spl/nand_boot_fsl_elbc.c $@ $(obj)ns16550.c: - @rm -f $(obj)ns16550.c - ln -sf $(SRCTREE)/drivers/serial/ns16550.c $(obj)ns16550.c + @rm -f $@ + ln -sf $(SRCTREE)/drivers/serial/ns16550.c $@ $(obj)resetvec.S: - @rm -f $(obj)resetvec.S - ln -s $(SRCTREE)/$(CPUDIR)/resetvec.S $(obj)resetvec.S + @rm -f $@ + ln -s $(SRCTREE)/$(CPUDIR)/resetvec.S $@ $(obj)fixed_ivor.S: - @rm -f $(obj)fixed_ivor.S - ln -sf $(SRCTREE)/$(CPUDIR)/fixed_ivor.S $(obj)fixed_ivor.S + @rm -f $@ + ln -sf $(SRCTREE)/$(CPUDIR)/fixed_ivor.S $@ $(obj)start.S: $(obj)fixed_ivor.S - @rm -f $(obj)start.S - ln -sf $(SRCTREE)/$(CPUDIR)/start.S $(obj)start.S + @rm -f $@ + ln -sf $(SRCTREE)/$(CPUDIR)/start.S $@ $(obj)tlb.c: - @rm -f $(obj)tlb.c - ln -sf $(SRCTREE)/$(CPUDIR)/tlb.c $(obj)tlb.c + @rm -f $@ + ln -sf $(SRCTREE)/$(CPUDIR)/tlb.c $@ $(obj)tlb_table.c: - @rm -f $(obj)tlb_table.c - ln -sf $(SRCTREE)/board/$(BOARDDIR)/tlb.c $(obj)tlb_table.c + @rm -f $@ + ln -sf $(SRCTREE)/board/$(BOARDDIR)/tlb.c $@ ifneq ($(OBJTREE), $(SRCTREE)) $(obj)nand_boot.c: - @rm -f $(obj)nand_boot.c - ln -s $(SRCTREE)/nand_spl/board/$(BOARDDIR)/nand_boot.c $(obj)nand_boot.c + @rm -f $@ + ln -s $(SRCTREE)/nand_spl/board/$(BOARDDIR)/nand_boot.c $@ endif ######################################################################### diff --git a/nand_spl/board/freescale/p1023rds/nand_boot.c b/nand_spl/board/freescale/p1023rds/nand_boot.c index 94680004f7..d9afa6d024 100644 --- a/nand_spl/board/freescale/p1023rds/nand_boot.c +++ b/nand_spl/board/freescale/p1023rds/nand_boot.c @@ -10,7 +10,7 @@ #include <asm/io.h> #include <nand.h> #include <asm/fsl_law.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <asm/global_data.h> DECLARE_GLOBAL_DATA_PTR; @@ -18,7 +18,8 @@ DECLARE_GLOBAL_DATA_PTR; /* Fixed sdram init -- doesn't use serial presence detect. */ void sdram_init(void) { - ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC8xxx_DDR_ADDR; + struct ccsr_ddr __iomem *ddr = + (struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DDR_ADDR; set_next_law(0, LAW_SIZE_2G, LAW_TRGT_IF_DDR_1); diff --git a/nand_spl/board/freescale/p1_p2_rdb/Makefile b/nand_spl/board/freescale/p1_p2_rdb/Makefile index d3dac2074c..62330815cc 100644 --- a/nand_spl/board/freescale/p1_p2_rdb/Makefile +++ b/nand_spl/board/freescale/p1_p2_rdb/Makefile @@ -30,9 +30,7 @@ OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) __OBJS := $(SOBJS) $(COBJS) LNDIR := $(nandobj)board/$(BOARDDIR) -ALL = $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin - -all: $(obj).depend $(ALL) +all: $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin $(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@ @@ -42,8 +40,7 @@ $(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) $(PLATFORM_LIBS) \ - -Map $(nandobj)u-boot-spl.map \ - -o $(nandobj)u-boot-spl + -Map $(nandobj)u-boot-spl.map -o $@ $(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \ @@ -52,58 +49,57 @@ $(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) # create symbolic links for common files $(obj)cache.c: - @rm -f $(obj)cache.c - ln -sf $(SRCTREE)/arch/powerpc/lib/cache.c $(obj)cache.c + @rm -f $@ + ln -sf $(SRCTREE)/arch/powerpc/lib/cache.c $@ $(obj)cpu_init_early.c: - @rm -f $(obj)cpu_init_early.c - ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/cpu_init_early.c $(obj)cpu_init_early.c + @rm -f $@ + ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/cpu_init_early.c $@ $(obj)spl_minimal.c: - @rm -f $(obj)spl_minimal.c - ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/spl_minimal.c $(obj)spl_minimal.c + @rm -f $@ + ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/spl_minimal.c $@ $(obj)fsl_law.c: - @rm -f $(obj)fsl_law.c - ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc8xxx/law.c $(obj)fsl_law.c + @rm -f $@ + ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc8xxx/law.c $@ $(obj)law.c: - @rm -f $(obj)law.c - ln -sf $(SRCTREE)/board/$(BOARDDIR)/law.c $(obj)law.c + @rm -f $@ + ln -sf $(SRCTREE)/board/$(BOARDDIR)/law.c $@ $(obj)nand_boot_fsl_elbc.c: - @rm -f $(obj)nand_boot_fsl_elbc.c - ln -sf $(SRCTREE)/nand_spl/nand_boot_fsl_elbc.c \ - $(obj)nand_boot_fsl_elbc.c + @rm -f $@ + ln -sf $(SRCTREE)/nand_spl/nand_boot_fsl_elbc.c $@ $(obj)ns16550.c: - @rm -f $(obj)ns16550.c - ln -sf $(SRCTREE)/drivers/serial/ns16550.c $(obj)ns16550.c + @rm -f $@ + ln -sf $(SRCTREE)/drivers/serial/ns16550.c $@ $(obj)resetvec.S: - @rm -f $(obj)resetvec.S - ln -s $(SRCTREE)/$(CPUDIR)/resetvec.S $(obj)resetvec.S + @rm -f $@ + ln -s $(SRCTREE)/$(CPUDIR)/resetvec.S $@ $(obj)fixed_ivor.S: - @rm -f $(obj)fixed_ivor.S - ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/fixed_ivor.S $(obj)fixed_ivor.S + @rm -f $@ + ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/fixed_ivor.S $@ $(obj)start.S: $(obj)fixed_ivor.S - @rm -f $(obj)start.S - ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/start.S $(obj)start.S + @rm -f $@ + ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/start.S $@ $(obj)tlb.c: - @rm -f $(obj)tlb.c - ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/tlb.c $(obj)tlb.c + @rm -f $@ + ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/tlb.c $@ $(obj)tlb_table.c: - @rm -f $(obj)tlb_table.c - ln -sf $(SRCTREE)/board/$(BOARDDIR)/tlb.c $(obj)tlb_table.c + @rm -f $@ + ln -sf $(SRCTREE)/board/$(BOARDDIR)/tlb.c $@ ifneq ($(OBJTREE), $(SRCTREE)) $(obj)nand_boot.c: - @rm -f $(obj)nand_boot.c - ln -s $(SRCTREE)/nand_spl/board/$(BOARDDIR)/nand_boot.c $(obj)nand_boot.c + @rm -f $@ + ln -s $(SRCTREE)/nand_spl/board/$(BOARDDIR)/nand_boot.c $@ endif ######################################################################### diff --git a/nand_spl/board/freescale/p1_p2_rdb/nand_boot.c b/nand_spl/board/freescale/p1_p2_rdb/nand_boot.c index 3244c8f6d9..f7e8438438 100644 --- a/nand_spl/board/freescale/p1_p2_rdb/nand_boot.c +++ b/nand_spl/board/freescale/p1_p2_rdb/nand_boot.c @@ -10,7 +10,7 @@ #include <nand.h> #include <asm/mmu.h> #include <asm/immap_85xx.h> -#include <asm/fsl_ddr_sdram.h> +#include <fsl_ddr_sdram.h> #include <asm/fsl_law.h> #define SYSCLK_MASK 0x00200000 diff --git a/nand_spl/board/sheldon/simpc8313/Makefile b/nand_spl/board/sheldon/simpc8313/Makefile index 08739edc4e..90f132c34c 100644 --- a/nand_spl/board/sheldon/simpc8313/Makefile +++ b/nand_spl/board/sheldon/simpc8313/Makefile @@ -28,9 +28,7 @@ OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) __OBJS := $(SOBJS) $(COBJS) LNDIR := $(nandobj)board/$(BOARDDIR) -ALL = $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin - -all: $(obj).depend $(ALL) +all: $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin $(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@ @@ -40,8 +38,7 @@ $(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot.lds cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) $(PLATFORM_LIBS) \ - -Map $(nandobj)u-boot-spl.map \ - -o $(nandobj)u-boot-spl + -Map $(nandobj)u-boot-spl.map -o $@ $(nandobj)u-boot.lds: $(LDSCRIPT) $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@ diff --git a/net/tftp.c b/net/tftp.c index 6d333d559c..966d1cfba3 100644 --- a/net/tftp.c +++ b/net/tftp.c @@ -281,7 +281,7 @@ static void update_block_number(void) * number of 0 this means that there was a wrap * around of the (16 bit) counter. */ - if (TftpBlock == 0) { + if (TftpBlock == 0 && TftpLastBlock != 0) { TftpBlockWrap++; TftpBlockWrapOffset += TftpBlkSize * TFTP_SEQUENCE_SIZE; TftpTimeoutCount = 0; /* we've done well, reset thhe timeout */ @@ -849,6 +849,9 @@ TftpStartServer(void) TftpState = STATE_RECV_WRQ; net_set_udp_handler(TftpHandler); + + /* zero out server ether in case the server ip has changed */ + memset(NetServerEther, 0, 6); } #endif /* CONFIG_CMD_TFTPSRV */ diff --git a/post/board/lwmon/Makefile b/post/board/lwmon/Makefile index 1ac7aa511d..b23debcabe 100644 --- a/post/board/lwmon/Makefile +++ b/post/board/lwmon/Makefile @@ -5,6 +5,4 @@ # SPDX-License-Identifier: GPL-2.0+ # -CPPFLAGS += -I$(TOPDIR) - obj-$(CONFIG_HAS_POST) += sysmon.o diff --git a/post/board/lwmon5/Makefile b/post/board/lwmon5/Makefile index d8b195289e..a50ce67cde 100644 --- a/post/board/lwmon5/Makefile +++ b/post/board/lwmon5/Makefile @@ -5,6 +5,4 @@ # # SPDX-License-Identifier: GPL-2.0+ -CPPFLAGS += -I$(TOPDIR) - obj-$(CONFIG_HAS_POST) += sysmon.o watchdog.o dspic.o fpga.o dsp.o gdc.o diff --git a/post/board/netta/Makefile b/post/board/netta/Makefile index cd27a5ce34..5c37f497cc 100644 --- a/post/board/netta/Makefile +++ b/post/board/netta/Makefile @@ -5,6 +5,4 @@ # SPDX-License-Identifier: GPL-2.0+ # -CPPFLAGS += -I$(TOPDIR) - obj-$(CONFIG_HAS_POST) += codec.o dsp.o diff --git a/post/board/pdm360ng/Makefile b/post/board/pdm360ng/Makefile index 3f748892a7..b43b77b2d3 100644 --- a/post/board/pdm360ng/Makefile +++ b/post/board/pdm360ng/Makefile @@ -5,6 +5,4 @@ # SPDX-License-Identifier: GPL-2.0+ # -CPPFLAGS += -I$(TOPDIR) - obj-$(CONFIG_HAS_POST) += coproc_com.o diff --git a/post/cpu/mpc83xx/Makefile b/post/cpu/mpc83xx/Makefile index 0643d01a7b..4b3c50e6af 100644 --- a/post/cpu/mpc83xx/Makefile +++ b/post/cpu/mpc83xx/Makefile @@ -5,6 +5,4 @@ # SPDX-License-Identifier: GPL-2.0+ # -CPPFLAGS += -I$(TOPDIR) - obj-$(CONFIG_HAS_POST) += ecc.o diff --git a/post/cpu/mpc8xx/Makefile b/post/cpu/mpc8xx/Makefile index 7a2930a797..f8bb6c9343 100644 --- a/post/cpu/mpc8xx/Makefile +++ b/post/cpu/mpc8xx/Makefile @@ -5,7 +5,5 @@ # SPDX-License-Identifier: GPL-2.0+ # -CPPFLAGS += -I$(TOPDIR) - obj-$(CONFIG_HAS_POST) += cache_8xx.o obj-$(CONFIG_HAS_POST) += cache.o ether.o spr.o uart.o usb.o watchdog.o diff --git a/post/cpu/ppc4xx/Makefile b/post/cpu/ppc4xx/Makefile index b7435c8252..ed3e8e87fd 100644 --- a/post/cpu/ppc4xx/Makefile +++ b/post/cpu/ppc4xx/Makefile @@ -5,8 +5,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -CPPFLAGS += -I$(TOPDIR) - obj-$(CONFIG_HAS_POST) += cache_4xx.o obj-$(CONFIG_HAS_POST) += cache.o obj-$(CONFIG_HAS_POST) += denali_ecc.o diff --git a/post/drivers/Makefile b/post/drivers/Makefile index 2f6844cca4..328f880b1d 100644 --- a/post/drivers/Makefile +++ b/post/drivers/Makefile @@ -5,6 +5,4 @@ # SPDX-License-Identifier: GPL-2.0+ # -CPPFLAGS += -I$(TOPDIR) - obj-$(CONFIG_HAS_POST) += flash.o i2c.o memory.o rtc.o diff --git a/post/lib_powerpc/Makefile b/post/lib_powerpc/Makefile index f19fea3e5f..d2b8a940df 100644 --- a/post/lib_powerpc/Makefile +++ b/post/lib_powerpc/Makefile @@ -5,8 +5,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -CPPFLAGS += -I$(TOPDIR) - obj-$(CONFIG_HAS_POST) += asm.o obj-$(CONFIG_HAS_POST) += cpu.o cmp.o cmpi.o two.o twox.o three.o threex.o obj-$(CONFIG_HAS_POST) += threei.o andi.o srawi.o rlwnm.o rlwinm.o rlwimi.o diff --git a/post/lib_powerpc/fpu/Makefile b/post/lib_powerpc/fpu/Makefile index 6aec96c023..ee01a313f1 100644 --- a/post/lib_powerpc/fpu/Makefile +++ b/post/lib_powerpc/fpu/Makefile @@ -5,8 +5,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -CPPFLAGS += -I$(TOPDIR) - obj-$(CONFIG_HAS_POST) += 20001122-1.o obj-$(CONFIG_HAS_POST) += 20010114-2.o obj-$(CONFIG_HAS_POST) += 20010226-1.o diff --git a/scripts/Makefile.build b/scripts/Makefile.build index 2ef7341f37..e3354aaa3f 100644 --- a/scripts/Makefile.build +++ b/scripts/Makefile.build @@ -10,10 +10,6 @@ SRCS := include Makefile -# Backward compatible: obj-y is preferable -COBJS := $(sort $(COBJS) $(COBJS-y)) -SOBJS := $(sort $(SOBJS) $(SOBJS-y)) - # Going forward use the following obj-y := $(sort $(obj-y)) extra-y := $(sort $(extra-y)) @@ -24,11 +20,18 @@ obj-y := $(patsubst %/, %/built-in.o, $(obj-y)) subdir-obj-y := $(filter %/built-in.o, $(obj-y)) subdir-obj-y := $(addprefix $(obj),$(subdir-obj-y)) -SRCS += $(COBJS:.o=.c) $(SOBJS:.o=.S) \ - $(wildcard $(obj-y:.o=.c) $(obj-y:.o=.S) $(lib-y:.o=.c) $(lib-y:.o=.S) $(extra-y:.o=.c) $(extra-y:.o=.S)) -OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS) $(obj-y)) +SRCS += $(wildcard $(obj-y:.o=.c) $(obj-y:.o=.S) $(lib-y:.o=.c) \ + $(lib-y:.o=.S) $(extra-y:.o=.c) $(extra-y:.o=.S)) +OBJS := $(addprefix $(obj),$(obj-y)) + +# $(obj-dirs) is a list of directories that contain object files +obj-dirs := $(dir $(OBJS)) + +# Create directories for object files if directory does not exist +# Needed when obj-y := dir/file.o syntax is used +_dummy := $(foreach d,$(obj-dirs), $(shell [ -d $(d) ] || mkdir -p $(d))) -LGOBJS := $(addprefix $(obj),$(sort $(GLSOBJS) $(GLCOBJS)) $(lib-y)) +LGOBJS := $(addprefix $(obj),$(sort $(lib-y))) all: $(LIB) $(addprefix $(obj),$(extra-y)) diff --git a/spl/Makefile b/spl/Makefile index cbd3d27849..2a787afa4f 100644 --- a/spl/Makefile +++ b/spl/Makefile @@ -54,63 +54,55 @@ ifeq ($(CPU),mpc85xx) START += $(START_PATH)/resetvec.o endif -LIBS-y += arch/$(ARCH)/lib/lib$(ARCH).o +LIBS-y += arch/$(ARCH)/lib/ -LIBS-y += $(CPUDIR)/lib$(CPU).o -ifeq ($(CPU),mpc83xx) -LIBS-y += arch/powerpc/cpu/mpc8xxx/lib8xxx.o -endif -ifeq ($(CPU),mpc85xx) -LIBS-y += arch/powerpc/cpu/mpc8xxx/lib8xxx.o -ifdef CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT -LIBS-y += arch/powerpc/cpu/mpc8xxx/ddr/libddr.o -endif -endif -ifeq ($(CPU),mpc86xx) -LIBS-y += arch/powerpc/cpu/mpc8xxx/lib8xxx.o -endif +LIBS-y += $(CPUDIR)/ ifdef SOC -LIBS-y += $(CPUDIR)/$(SOC)/lib$(SOC).o -endif -LIBS-y += board/$(BOARDDIR)/lib$(BOARD).o -LIBS-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/lib$(VENDOR).o - -LIBS-$(CONFIG_SPL_FRAMEWORK) += common/spl/libspl.o -LIBS-$(CONFIG_SPL_LIBCOMMON_SUPPORT) += common/libcommon.o -LIBS-$(CONFIG_SPL_LIBDISK_SUPPORT) += disk/libdisk.o -LIBS-$(CONFIG_SPL_I2C_SUPPORT) += drivers/i2c/libi2c.o -LIBS-$(CONFIG_SPL_GPIO_SUPPORT) += drivers/gpio/libgpio.o -LIBS-$(CONFIG_SPL_MMC_SUPPORT) += drivers/mmc/libmmc.o -LIBS-$(CONFIG_SPL_SERIAL_SUPPORT) += drivers/serial/libserial.o -LIBS-$(CONFIG_SPL_SPI_FLASH_SUPPORT) += drivers/mtd/spi/libspi_flash.o -LIBS-$(CONFIG_SPL_SPI_SUPPORT) += drivers/spi/libspi.o -LIBS-$(CONFIG_SPL_FAT_SUPPORT) += fs/fat/libfat.o -LIBS-$(CONFIG_SPL_LIBGENERIC_SUPPORT) += lib/libgeneric.o -LIBS-$(CONFIG_SPL_POWER_SUPPORT) += drivers/power/libpower.o \ - drivers/power/pmic/libpmic.o -LIBS-$(CONFIG_SPL_NAND_SUPPORT) += drivers/mtd/nand/libnand.o -LIBS-$(CONFIG_SPL_ONENAND_SUPPORT) += drivers/mtd/onenand/libonenand.o -LIBS-$(CONFIG_SPL_DMA_SUPPORT) += drivers/dma/libdma.o -LIBS-$(CONFIG_SPL_POST_MEM_SUPPORT) += post/drivers/memory.o -LIBS-$(CONFIG_SPL_NET_SUPPORT) += net/libnet.o -LIBS-$(CONFIG_SPL_ETH_SUPPORT) += drivers/net/libnet.o -LIBS-$(CONFIG_SPL_ETH_SUPPORT) += drivers/net/phy/libphy.o -LIBS-$(CONFIG_SPL_USBETH_SUPPORT) += drivers/net/phy/libphy.o -LIBS-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += drivers/usb/musb-new/libusb_musb-new.o -LIBS-$(CONFIG_SPL_USBETH_SUPPORT) += drivers/usb/gadget/libusb_gadget.o -LIBS-$(CONFIG_SPL_WATCHDOG_SUPPORT) += drivers/watchdog/libwatchdog.o +LIBS-y += $(CPUDIR)/$(SOC)/ +endif +LIBS-y += board/$(BOARDDIR)/ +LIBS-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/ + +LIBS-$(CONFIG_SPL_FRAMEWORK) += common/spl/ +LIBS-$(CONFIG_SPL_LIBCOMMON_SUPPORT) += common/ +LIBS-$(CONFIG_SPL_LIBDISK_SUPPORT) += disk/ +LIBS-$(CONFIG_SPL_I2C_SUPPORT) += drivers/i2c/ +LIBS-$(CONFIG_SPL_GPIO_SUPPORT) += drivers/gpio/ +LIBS-$(CONFIG_SPL_MMC_SUPPORT) += drivers/mmc/ +LIBS-$(CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT) += drivers/ddr/fsl/ +LIBS-$(CONFIG_SPL_SERIAL_SUPPORT) += drivers/serial/ +LIBS-$(CONFIG_SPL_SPI_FLASH_SUPPORT) += drivers/mtd/spi/ +LIBS-$(CONFIG_SPL_SPI_SUPPORT) += drivers/spi/ +LIBS-y += fs/ +LIBS-$(CONFIG_SPL_LIBGENERIC_SUPPORT) += lib/ +LIBS-$(CONFIG_SPL_POWER_SUPPORT) += drivers/power/ \ + drivers/power/pmic/ +LIBS-$(CONFIG_SPL_NAND_SUPPORT) += drivers/mtd/nand/ +LIBS-$(CONFIG_SPL_ONENAND_SUPPORT) += drivers/mtd/onenand/ +LIBS-$(CONFIG_SPL_DMA_SUPPORT) += drivers/dma/ +LIBS-$(CONFIG_SPL_POST_MEM_SUPPORT) += post/drivers/ +LIBS-$(CONFIG_SPL_NET_SUPPORT) += net/ +LIBS-$(CONFIG_SPL_ETH_SUPPORT) += drivers/net/ +LIBS-$(CONFIG_SPL_ETH_SUPPORT) += drivers/net/phy/ +LIBS-$(CONFIG_SPL_USBETH_SUPPORT) += drivers/net/phy/ +LIBS-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += drivers/usb/musb-new/ +LIBS-$(CONFIG_SPL_USBETH_SUPPORT) += drivers/usb/gadget/ +LIBS-$(CONFIG_SPL_WATCHDOG_SUPPORT) += drivers/watchdog/ ifneq (,$(CONFIG_MX23)$(filter $(SOC), mx25 mx27 mx5 mx6 mx31 mx35)) -LIBS-y += arch/$(ARCH)/imx-common/libimx-common.o +LIBS-y += arch/$(ARCH)/imx-common/ endif -LIBS-$(CONFIG_ARM) += arch/arm/cpu/libcpu.o +LIBS-$(CONFIG_ARM) += arch/arm/cpu/ +LIBS-$(CONFIG_PPC) += arch/powerpc/cpu/ ifneq ($(CONFIG_MX23)$(CONFIG_MX35),) -LIBS-y += arch/$(ARCH)/imx-common/libimx-common.o +LIBS-y += arch/$(ARCH)/imx-common/ endif +LIBS-y := $(patsubst %/, %/built-in.o, $(LIBS-y)) + # Add GCC lib ifeq ("$(USE_PRIVATE_LIBGCC)", "yes") PLATFORM_LIBGCC = $(SPLTREE)/arch/$(ARCH)/lib/libgcc.o @@ -175,8 +167,7 @@ all: $(ALL-y) ifdef CONFIG_SAMSUNG $(obj)$(BOARD)-spl.bin: $(obj)u-boot-spl.bin - $(OBJTREE)/tools/mk$(BOARD)spl \ - $(obj)u-boot-spl.bin $(obj)$(BOARD)-spl.bin + $(OBJTREE)/tools/mk$(BOARD)spl $< $@ endif $(obj)$(SPL_BIN).bin: $(obj)$(SPL_BIN) @@ -195,7 +186,6 @@ $(START): $(LIBS): depend $(MAKE) $(build) $(SRCTREE)$(dir $(subst $(SPLTREE),,$@)) - mv $(dir $@)built-in.o $@ $(obj)u-boot-spl.lds: $(LDSCRIPT) depend $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(obj). -ansi -D__ASSEMBLY__ -P - < $< > $@ diff --git a/tools/buildman/README b/tools/buildman/README index 090b653116..c30c1d4114 100644 --- a/tools/buildman/README +++ b/tools/buildman/README @@ -89,10 +89,16 @@ a few commits or boards, it will be pretty slow. As a tip, if you don't plan to use your machine for anything else, you can use -T to increase the number of threads beyond the default. -Buildman lets you build all boards, or a subset. Specify the subset using -the board name, architecture name, SOC name, or anything else in the -boards.cfg file. So 'at91' will build all AT91 boards (arm), powerpc will -build all PowerPC boards. +Buildman lets you build all boards, or a subset. Specify the subset by passing +command-line arguments that list the desired board name, architecture name, +SOC name, or anything else in the boards.cfg file. Multiple arguments are +allowed. Each argument will be interpreted as a regular expression, so +behaviour is a superset of exact or substring matching. Examples are: + +* 'tegra20' All boards with a Tegra20 SoC +* 'tegra' All boards with any Tegra Soc (Tegra20, Tegra30, Tegra114...) +* '^tegra[23]0$' All boards with either Tegra20 or Tegra30 SoC +* 'powerpc' All PowerPC boards Buildman does not store intermediate object files. It optionally copies the binary output into a directory when a build is successful. Size @@ -643,7 +649,7 @@ snapper9260=${at91-boards} BUILD_TAG=442 snapper9g45=${at91-boards} BUILD_TAG=443 This will use 'make ENABLE_AT91_TEST=1 BUILD_TAG=442' for snapper9260 -and 'make ENABLE_AT91_TEST=1 BUILD_TAG=442' for snapper9g45. A special +and 'make ENABLE_AT91_TEST=1 BUILD_TAG=443' for snapper9g45. A special variable ${target} is available to access the target name (snapper9260 and snapper9g20 in this case). Variables are resolved recursively. diff --git a/tools/buildman/board.py b/tools/buildman/board.py index 1d3db206bd..5172a473e3 100644 --- a/tools/buildman/board.py +++ b/tools/buildman/board.py @@ -3,6 +3,8 @@ # SPDX-License-Identifier: GPL-2.0+ # +import re + class Board: """A particular board that we can build""" def __init__(self, status, arch, cpu, soc, vendor, board_name, target, options): @@ -135,14 +137,22 @@ class Boards: due to each argument, arranged by argument. """ result = {} + argres = {} for arg in args: result[arg] = 0 + argres[arg] = re.compile(arg) result['all'] = 0 for board in self._boards: if args: for arg in args: - if arg in board.props: + argre = argres[arg] + match = False + for prop in board.props: + match = argre.match(prop) + if match: + break + if match: if not board.build_it: board.build_it = True result[arg] += 1 diff --git a/tools/gdb/Makefile b/tools/gdb/Makefile index dee91fccc0..dd98fb65c0 100644 --- a/tools/gdb/Makefile +++ b/tools/gdb/Makefile @@ -23,8 +23,6 @@ BINS := $(addprefix $(obj),$(BINS)) # HOSTCPPFLAGS = -I$(BFD_ROOT_DIR)/include -HOSTOS := $(shell uname -s | sed -e 's/\([Cc][Yy][Gg][Ww][Ii][Nn]\).*/cygwin/') - ifeq ($(HOSTOS),cygwin) all: diff --git a/tools/imls/Makefile b/tools/imls/Makefile deleted file mode 100644 index b045df2df0..0000000000 --- a/tools/imls/Makefile +++ /dev/null @@ -1,84 +0,0 @@ -# -# (C) Copyright 2009 Marco Stornelli <marco.stornelli@gmail.com> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -include $(TOPDIR)/config.mk - -# Generated executable files -BIN_FILES-y += imls - -# Source files which exist outside the tools/imls directory -EXT_OBJ_FILES-y += lib/crc32.o -EXT_OBJ_FILES-y += lib/md5.o -EXT_OBJ_FILES-y += lib/sha1.o -EXT_OBJ_FILES-y += common/image.o - -# Source files located in the tools/imls directory -OBJ_FILES-y += imls.o - -# Flattened device tree objects -LIBFDT_OBJ_FILES-y += fdt.o -LIBFDT_OBJ_FILES-y += fdt_ro.o -LIBFDT_OBJ_FILES-y += fdt_rw.o -LIBFDT_OBJ_FILES-y += fdt_strerror.o -LIBFDT_OBJ_FILES-y += fdt_wip.o - -# now $(obj) is defined -SRCS += $(addprefix $(SRCTREE)/,$(EXT_OBJ_FILES-y:.o=.c)) -SRCS += $(addprefix $(SRCTREE)/tools/,$(OBJ_FILES-y:.o=.c)) -SRCS += $(addprefix $(SRCTREE)/lib/libfdt/,$(LIBFDT_OBJ_FILES-y:.o=.c)) -BINS := $(addprefix $(obj),$(sort $(BIN_FILES-y))) -LIBFDT_OBJS := $(addprefix $(obj),$(LIBFDT_OBJ_FILES-y)) - -# -# Compile for a hosted environment on the target -# Define __KERNEL_STRICT_NAMES to prevent typedef overlaps -# -HOSTCPPFLAGS = -idirafter $(SRCTREE)/include \ - -idirafter $(SRCTREE)/arch/$(ARCH)/include \ - -idirafter $(OBJTREE)/include \ - -I $(SRCTREE)/lib/libfdt \ - -I $(SRCTREE)/tools \ - -DUSE_HOSTCC -D__KERNEL_STRICT_NAMES - -ifeq ($(MTD_VERSION),old) -HOSTCPPFLAGS += -DMTD_OLD -endif - -all: $(BINS) - -$(obj)imls: $(obj)imls.o $(obj)crc32.o $(obj)image.o $(obj)md5.o \ - $(obj)sha1.o $(LIBFDT_OBJS) - $(CC) $(HOSTCFLAGS) $(HOSTLDFLAGS) -o $@ $^ - $(STRIP) $@ - -# Some files complain if compiled with -pedantic, use HOSTCFLAGS_NOPED -$(obj)image.o: $(SRCTREE)/common/image.c - $(CC) -g $(HOSTCFLAGS_NOPED) -c -o $@ $< - -$(obj)imls.o: $(SRCTREE)/tools/imls/imls.c - $(CC) -g $(HOSTCFLAGS_NOPED) -c -o $@ $< - -# Some of the tool objects need to be accessed from outside the tools/imls directory -$(obj)%.o: $(SRCTREE)/common/%.c - $(CC) -g $(HOSTCFLAGS_NOPED) -c -o $@ $< - -$(obj)%.o: $(SRCTREE)/lib/%.c - $(CC) -g $(HOSTCFLAGS) -c -o $@ $< - -$(obj)%.o: $(SRCTREE)/lib/libfdt/%.c - $(CC) -g $(HOSTCFLAGS_NOPED) -c -o $@ $< - -clean: - rm -rf *.o imls - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/tools/imls/README b/tools/imls/README deleted file mode 100644 index 9adf92305d..0000000000 --- a/tools/imls/README +++ /dev/null @@ -1,41 +0,0 @@ -# -# (C) Copyright 2009 Marco Stornelli <marco.stornelli@gmail.com> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -IMLS -------------- - -imls is an implementation of a Linux command line tool to access -to raw flash partitions and list images made with mkimage command. - -For building against older versions of the MTD headers (meaning before -v2.6.8-rc1) it is required to pass the argument "MTD_VERSION=old" to -make. - -Usage examples --------------- - -1) Flash with sectors of 128KiB and 32 sectors: - -> imls -c 32 -s 131072 /dev/mtd0 -Searching... -Image Name: foo -Created: Fri Apr 10 18:11:30 2009 -Image Type: Intel x86 Linux Standalone Program (uncompressed) -Data Size: 10716 Bytes = 10.46 kB = 0.01 MB -Load Address: 00000000 -Entry Point: 00000000 - -2) Flash with sectors of 64KiB and 128 sectors and with a search offset of one -sector: - -> imls -o 1 -c 128 -s 65536 /dev/mtd0 -Searching... -Image Name: foo -Created: Fri Apr 10 18:11:30 2009 -Image Type: Intel x86 Linux Standalone Program (uncompressed) -Data Size: 10716 Bytes = 10.46 kB = 0.01 MB -Load Address: 00000000 -Entry Point: 00000000 diff --git a/tools/imls/imls.c b/tools/imls/imls.c deleted file mode 100644 index 95043b450b..0000000000 --- a/tools/imls/imls.c +++ /dev/null @@ -1,256 +0,0 @@ -/* - * (C) Copyright 2009 Marco Stornelli - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <errno.h> -#include <fcntl.h> -#include <stdio.h> -#include <stdlib.h> -#include <stddef.h> -#include <string.h> -#include <sys/types.h> -#include <sys/ioctl.h> -#include <sys/stat.h> -#include <unistd.h> -#include <asm/page.h> - -#ifdef MTD_OLD -#include <stdint.h> -#include <linux/mtd/mtd.h> -#else -#define __user /* nothing */ -#include <mtd/mtd-user.h> -#endif - -#include <sha1.h> -#include <libfdt.h> -#include <fdt_support.h> -#include <image.h> - -#define MIN(a, b) (((a) < (b)) ? (a) : (b)) - -extern unsigned long crc32(unsigned long crc, const char *buf, unsigned int len); -static void usage(void); -static int image_verify_header(char *ptr, int fd); -static int flash_bad_block(int fd, uint8_t mtd_type, loff_t start); - -char *cmdname; -char *devicefile; - -unsigned int sectorcount = 0; -int sflag = 0; -unsigned int sectoroffset = 0; -unsigned int sectorsize = 0; -int cflag = 0; - -int main (int argc, char **argv) -{ - int fd = -1, err = 0, readbyte = 0, j; - struct mtd_info_user mtdinfo; - char buf[sizeof(image_header_t)]; - int found = 0; - - cmdname = *argv; - - while (--argc > 0 && **++argv == '-') { - while (*++*argv) { - switch (**argv) { - case 'c': - if (--argc <= 0) - usage (); - sectorcount = (unsigned int)atoi(*++argv); - cflag = 1; - goto NXTARG; - case 'o': - if (--argc <= 0) - usage (); - sectoroffset = (unsigned int)atoi(*++argv); - goto NXTARG; - - case 's': - if (--argc <= 0) - usage (); - sectorsize = (unsigned int)atoi(*++argv); - sflag = 1; - goto NXTARG; - default: - usage (); - } - } -NXTARG: ; - } - - if (argc != 1 || cflag == 0 || sflag == 0) - usage(); - - devicefile = *argv; - - fd = open(devicefile, O_RDONLY); - if (fd < 0) { - fprintf (stderr, "%s: Can't open %s: %s\n", - cmdname, devicefile, strerror(errno)); - exit(EXIT_FAILURE); - } - - err = ioctl(fd, MEMGETINFO, &mtdinfo); - if (err < 0) { - fprintf(stderr, "%s: Cannot get MTD information: %s\n",cmdname, - strerror(errno)); - exit(EXIT_FAILURE); - } - - if (mtdinfo.type != MTD_NORFLASH && mtdinfo.type != MTD_NANDFLASH) { - fprintf(stderr, "%s: Unsupported flash type %u\n", - cmdname, mtdinfo.type); - exit(EXIT_FAILURE); - } - - if (sectorsize * sectorcount != mtdinfo.size) { - fprintf(stderr, "%s: Partition size (%d) incompatible with " - "sector size and count\n", cmdname, mtdinfo.size); - exit(EXIT_FAILURE); - } - - if (sectorsize * sectoroffset >= mtdinfo.size) { - fprintf(stderr, "%s: Partition size (%d) incompatible with " - "sector offset given\n", cmdname, mtdinfo.size); - exit(EXIT_FAILURE); - } - - if (sectoroffset > sectorcount - 1) { - fprintf(stderr, "%s: Sector offset cannot be grater than " - "sector count minus one\n", cmdname); - exit(EXIT_FAILURE); - } - - printf("Searching....\n"); - - for (j = sectoroffset; j < sectorcount; ++j) { - - if (lseek(fd, j*sectorsize, SEEK_SET) != j*sectorsize) { - fprintf(stderr, "%s: lseek failure: %s\n", - cmdname, strerror(errno)); - exit(EXIT_FAILURE); - } - - err = flash_bad_block(fd, mtdinfo.type, j*sectorsize); - if (err < 0) - exit(EXIT_FAILURE); - if (err) - continue; /* Skip and jump to next */ - - readbyte = read(fd, buf, sizeof(image_header_t)); - if (readbyte != sizeof(image_header_t)) { - fprintf(stderr, "%s: Can't read from device: %s\n", - cmdname, strerror(errno)); - exit(EXIT_FAILURE); - } - - if (fdt_check_header(buf)) { - /* old-style image */ - if (image_verify_header(buf, fd)) { - found = 1; - image_print_contents((image_header_t *)buf); - } - } else { - /* FIT image */ - fit_print_contents(buf); - } - - } - - close(fd); - - if(!found) - printf("No images found\n"); - - exit(EXIT_SUCCESS); -} - -void usage() -{ - fprintf (stderr, "Usage:\n" - " %s [-o offset] -s size -c count device\n" - " -o ==> number of sectors to use as offset\n" - " -c ==> number of sectors\n" - " -s ==> size of sectors (byte)\n", - cmdname); - - exit(EXIT_FAILURE); -} - -static int image_verify_header(char *ptr, int fd) -{ - int len, nread; - char *data; - uint32_t checksum; - image_header_t *hdr = (image_header_t *)ptr; - char buf[PAGE_SIZE]; - - if (image_get_magic(hdr) != IH_MAGIC) - return 0; - - data = (char *)hdr; - len = image_get_header_size(); - - checksum = image_get_hcrc(hdr); - hdr->ih_hcrc = htonl(0); /* clear for re-calculation */ - - if (crc32(0, data, len) != checksum) { - fprintf(stderr, - "%s: Maybe image found but it has bad header checksum!\n", - cmdname); - return 0; - } - - len = image_get_size(hdr); - checksum = 0; - - while (len > 0) { - nread = read(fd, buf, MIN(len,PAGE_SIZE)); - if (nread != MIN(len,PAGE_SIZE)) { - fprintf(stderr, - "%s: Error while reading: %s\n", - cmdname, strerror(errno)); - exit(EXIT_FAILURE); - } - checksum = crc32(checksum, buf, nread); - len -= nread; - } - - if (checksum != image_get_dcrc(hdr)) { - fprintf (stderr, - "%s: Maybe image found but it has corrupted data!\n", - cmdname); - return 0; - } - - return 1; -} - -/* - * Test for bad block on NAND, just returns 0 on NOR, on NAND: - * 0 - block is good - * > 0 - block is bad - * < 0 - failed to test - */ -static int flash_bad_block(int fd, uint8_t mtd_type, loff_t start) -{ - if (mtd_type == MTD_NANDFLASH) { - int badblock = ioctl(fd, MEMGETBADBLOCK, &start); - - if (badblock < 0) { - fprintf(stderr,"%s: Cannot read bad block mark: %s\n", - cmdname, strerror(errno)); - return badblock; - } - - if (badblock) { - return badblock; - } - } - - return 0; -} diff --git a/tools/patman/README b/tools/patman/README index e6d3070621..59f1776f54 100644 --- a/tools/patman/README +++ b/tools/patman/README @@ -180,6 +180,14 @@ END together and put after the cover letter. Can appear multiple times. +Commit-notes: +blah blah +blah blah +more blah blah +END + Similar, but for a single commit (patch). These notes will appear + immediately below the --- cut in the patch file. + Signed-off-by: Their Name <email> A sign-off is added automatically to your patches (this is probably a bug). If you put this tag in your patches, it will @@ -227,7 +235,7 @@ TEST=... Change-Id: Review URL: Reviewed-on: - +Commit-xxxx: (except Commit-notes) Exercise for the reader: Try adding some tags to one of your current patch series and see how the patches turn out. diff --git a/tools/patman/commit.py b/tools/patman/commit.py index 900cfb3a5a..89cce7f88a 100644 --- a/tools/patman/commit.py +++ b/tools/patman/commit.py @@ -21,6 +21,7 @@ class Commit: changes: Dict containing a list of changes (single line strings). The dict is indexed by change version (an integer) cc_list: List of people to aliases/emails to cc on this commit + notes: List of lines in the commit (not series) notes """ def __init__(self, hash): self.hash = hash @@ -28,6 +29,7 @@ class Commit: self.tags = [] self.changes = {} self.cc_list = [] + self.notes = [] def AddChange(self, version, info): """Add a new change line to the change list for a version. diff --git a/tools/patman/patchstream.py b/tools/patman/patchstream.py index c2045230af..684204c63f 100644 --- a/tools/patman/patchstream.py +++ b/tools/patman/patchstream.py @@ -30,7 +30,10 @@ re_cover = re.compile('^Cover-letter:') re_cover_cc = re.compile('^Cover-letter-cc: *(.*)') # Patch series tag -re_series = re.compile('^Series-([a-z-]*): *(.*)') +re_series_tag = re.compile('^Series-([a-z-]*): *(.*)') + +# Commit series tag +re_commit_tag = re.compile('^Commit-([a-z-]*): *(.*)') # Commit tags that we want to collect and keep re_tag = re.compile('^(Tested-by|Acked-by|Reviewed-by|Cc): (.*)') @@ -90,6 +93,20 @@ class PatchStream: if self.is_log: self.series.AddTag(self.commit, line, name, value) + def AddToCommit(self, line, name, value): + """Add a new Commit-xxx tag. + + When a Commit-xxx tag is detected, we come here to record it. + + Args: + line: Source line containing tag (useful for debug/error messages) + name: Tag name (part after 'Commit-') + value: Tag value (part after 'Commit-xxx: ') + """ + if name == 'notes': + self.in_section = 'commit-' + name + self.skip_blank = False + def CloseCommit(self): """Save the current commit into our commit list, and reset our state""" if self.commit and self.is_log: @@ -138,7 +155,8 @@ class PatchStream: line = line[4:] # Handle state transition and skipping blank lines - series_match = re_series.match(line) + series_tag_match = re_series_tag.match(line) + commit_tag_match = re_commit_tag.match(line) commit_match = re_commit.match(line) if self.is_log else None cover_cc_match = re_cover_cc.match(line) tag_match = None @@ -165,6 +183,9 @@ class PatchStream: elif self.in_section == 'notes': if self.is_log: self.series.notes += self.section + elif self.in_section == 'commit-notes': + if self.is_log: + self.commit.notes += self.section else: self.warn.append("Unknown section '%s'" % self.in_section) self.in_section = None @@ -178,7 +199,7 @@ class PatchStream: self.commit.subject = line # Detect the tags we want to remove, and skip blank lines - elif re_remove.match(line): + elif re_remove.match(line) and not commit_tag_match: self.skip_blank = True # TEST= should be the last thing in the commit, so remove @@ -211,9 +232,9 @@ class PatchStream: self.skip_blank = False # Detect Series-xxx tags - elif series_match: - name = series_match.group(1) - value = series_match.group(2) + elif series_tag_match: + name = series_tag_match.group(1) + value = series_tag_match.group(2) if name == 'changes': # value is the version number: e.g. 1, or 2 try: @@ -226,6 +247,14 @@ class PatchStream: self.AddToSeries(line, name, value) self.skip_blank = True + # Detect Commit-xxx tags + elif commit_tag_match: + name = commit_tag_match.group(1) + value = commit_tag_match.group(2) + if name == 'notes': + self.AddToCommit(line, name, value) + self.skip_blank = True + # Detect the start of a new commit elif commit_match: self.CloseCommit() @@ -276,7 +305,7 @@ class PatchStream: out = [] log = self.series.MakeChangeLog(self.commit) out += self.FormatTags(self.tags) - out += [line] + log + out += [line] + self.commit.notes + [''] + log elif self.found_test: if not re_allowed_after_test.match(line): self.lines_after_test += 1 diff --git a/tools/updater/Makefile b/tools/updater/Makefile deleted file mode 100644 index 19dd5eb6f4..0000000000 --- a/tools/updater/Makefile +++ /dev/null @@ -1,89 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -LOAD_ADDR = 0x40000 - -include $(TOPDIR)/config.mk - -PROG = $(obj)updater -IMAGE = $(obj)updater.image - -COBJS = update.o flash.o flash_hw.o utils.o cmd_flash.o string.o ctype.o dummy.o -COBJS_LINKS = stubs.o -AOBJS = ppcstring.o -AOBJS_LINKS = memio.o - -OBJS := $(addprefix $(obj),$(COBJS) $(COBJS_LINKS) $(AOBJS) $(AOBJS_LINKS)) -SRCS := $(COBJS:.o=.c) $(AOBJS:.o=.S) $(addprefix $(obj), $(COBJS_LINKS:.o:.c) $(AOBJS_LINKS:.o:.S)) - -CPPFLAGS += -I$(TOPDIR) -I$(TOPDIR)/board/MAI/AmigaOneG3SE -CFLAGS += -I$(TOPDIR)/board/MAI/AmigaOneG3SE -AFLAGS += -I$(TOPDIR)/board/MAI/AmigaOneG3SE - -DEPS = $(OBJTREE)/u-boot.bin $(OBJTREE)/tools/mkimage -ifneq ($(DEPS),$(wildcard $(DEPS))) -$(error "updater: Missing required objects, please run regular build first") -endif - -all: $(obj).depend $(PROG) $(IMAGE) - -######################################################################### - -$(obj)%.srec: %.o $(LIB) - $(LD) -g -Ttext $(LOAD_ADDR) -o $(<:.o=) -e $(<:.o=) $< $(LIB) - $(OBJCOPY) -O srec $(<:.o=) $@ - -$(obj)%.o: %.c - $(CC) $(CFLAGS) -c -o $@ $< - -$(obj)%.o: %.S - $(CC) $(AFLAGS) -c -o $@ $< - -$(obj)memio.o: $(obj)memio.S - $(CC) $(AFLAGS) -c -o $@ $< - -$(obj)memio.S: - rm -f $(obj)memio.c - ln -s $(SRCTREE)/board/MAI/AmigaOneG3SE/memio.S $(obj)memio.S - -$(obj)stubs.o: $(obj)stubs.c - $(CC) $(CFLAGS) -c -o $@ $< - -$(obj)stubs.c: - rm -f $(obj)stubs.c - ln -s $(SRCTREE)/examples/stubs.c $(obj)stubs.c - -######################################################################### - -$(obj)updater: $(OBJS) - $(LD) -g -Ttext $(LOAD_ADDR) -o $(obj)updater -e _main $(OBJS) - $(OBJCOPY) -O binary $(obj)updater $(obj)updater.bin - -$(obj)updater.image: $(obj)updater $(OBJTREE)/u-boot.bin - cat >/tmp/tempimage $(obj)updater.bin junk $(OBJTREE)/u-boot.bin - $(OBJTREE)/tools/mkimage -A ppc -O u-boot -T standalone -C none -a $(LOAD_ADDR) \ - -e `$(NM) $(obj)updater | grep _main | cut --bytes=0-8` \ - -n "Firmware Updater" -d /tmp/tempimage $(obj)updater.image - rm /tmp/tempimage - cp $(obj)updater.image /tftpboot - -(obj)updater.image2: $(obj)updater $(OBJTREE)/u-boot.bin - cat >/tmp/tempimage $(obj)updater.bin junk ../../create_image/image - $(OBJTREE)/tools/mkimage -A ppc -O u-boot -T standalone -C none -a $(LOAD_ADDR) \ - -e `$(NM) $(obj)updater | grep _main | cut --bytes=0-8` \ - -n "Firmware Updater" -d /tmp/tempimage $(obj)updater.image - rm /tmp/tempimage - cp $(obj)updater.image /tftpboot - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/tools/updater/cmd_flash.c b/tools/updater/cmd_flash.c deleted file mode 100644 index 3a604d00d5..0000000000 --- a/tools/updater/cmd_flash.c +++ /dev/null @@ -1,401 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * FLASH support - */ -#include <common.h> -#include <command.h> -#include <flash.h> - -#if defined(CONFIG_CMD_FLASH) - -extern flash_info_t flash_info[]; /* info for FLASH chips */ - -/* - * The user interface starts numbering for Flash banks with 1 - * for historical reasons. - */ - -/* - * this routine looks for an abbreviated flash range specification. - * the syntax is B:SF[-SL], where B is the bank number, SF is the first - * sector to erase, and SL is the last sector to erase (defaults to SF). - * bank numbers start at 1 to be consistent with other specs, sector numbers - * start at zero. - * - * returns: 1 - correct spec; *pinfo, *psf and *psl are - * set appropriately - * 0 - doesn't look like an abbreviated spec - * -1 - looks like an abbreviated spec, but got - * a parsing error, a number out of range, - * or an invalid flash bank. - */ -static int -abbrev_spec(char *str, flash_info_t **pinfo, int *psf, int *psl) -{ - flash_info_t *fp; - int bank, first, last; - char *p, *ep; - - if ((p = strchr(str, ':')) == NULL) - return 0; - *p++ = '\0'; - - bank = simple_strtoul(str, &ep, 10); - if (ep == str || *ep != '\0' || - bank < 1 || bank > CONFIG_SYS_MAX_FLASH_BANKS || - (fp = &flash_info[bank - 1])->flash_id == FLASH_UNKNOWN) - return -1; - - str = p; - if ((p = strchr(str, '-')) != NULL) - *p++ = '\0'; - - first = simple_strtoul(str, &ep, 10); - if (ep == str || *ep != '\0' || first >= fp->sector_count) - return -1; - - if (p != NULL) { - last = simple_strtoul(p, &ep, 10); - if (ep == p || *ep != '\0' || - last < first || last >= fp->sector_count) - return -1; - } - else - last = first; - - *pinfo = fp; - *psf = first; - *psl = last; - - return 1; -} -int do_flinfo (cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[]) -{ - ulong bank; - - if (argc == 1) { /* print info for all FLASH banks */ - for (bank=0; bank <CONFIG_SYS_MAX_FLASH_BANKS; ++bank) { - printf ("\nBank # %ld: ", bank+1); - - flash_print_info (&flash_info[bank]); - } - return 0; - } - - bank = simple_strtoul(argv[1], NULL, 16); - if ((bank < 1) || (bank > CONFIG_SYS_MAX_FLASH_BANKS)) { - printf ("Only FLASH Banks # 1 ... # %d supported\n", - CONFIG_SYS_MAX_FLASH_BANKS); - return 1; - } - printf ("\nBank # %ld: ", bank); - flash_print_info (&flash_info[bank-1]); - return 0; -} -int do_flerase(cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[]) -{ - flash_info_t *info; - ulong bank, addr_first, addr_last; - int n, sect_first, sect_last; - int rcode = 0; - - if (argc < 2) - return cmd_usage(cmdtp); - - if (strcmp(argv[1], "all") == 0) { - for (bank=1; bank<=CONFIG_SYS_MAX_FLASH_BANKS; ++bank) { - printf ("Erase Flash Bank # %ld ", bank); - info = &flash_info[bank-1]; - rcode = flash_erase (info, 0, info->sector_count-1); - } - return rcode; - } - - if ((n = abbrev_spec(argv[1], &info, §_first, §_last)) != 0) { - if (n < 0) { - printf("Bad sector specification\n"); - return 1; - } - printf ("Erase Flash Sectors %d-%d in Bank # %d ", - sect_first, sect_last, (info-flash_info)+1); - rcode = flash_erase(info, sect_first, sect_last); - return rcode; - } - - if (argc != 3) - return cmd_usage(cmdtp); - - if (strcmp(argv[1], "bank") == 0) { - bank = simple_strtoul(argv[2], NULL, 16); - if ((bank < 1) || (bank > CONFIG_SYS_MAX_FLASH_BANKS)) { - printf ("Only FLASH Banks # 1 ... # %d supported\n", - CONFIG_SYS_MAX_FLASH_BANKS); - return 1; - } - printf ("Erase Flash Bank # %ld ", bank); - info = &flash_info[bank-1]; - rcode = flash_erase (info, 0, info->sector_count-1); - return rcode; - } - - addr_first = simple_strtoul(argv[1], NULL, 16); - addr_last = simple_strtoul(argv[2], NULL, 16); - - if (addr_first >= addr_last) - return cmd_usage(cmdtp); - - printf ("Erase Flash from 0x%08lx to 0x%08lx ", addr_first, addr_last); - rcode = flash_sect_erase(addr_first, addr_last); - return rcode; -} - -int flash_sect_erase (ulong addr_first, ulong addr_last) -{ - flash_info_t *info; - ulong bank; - int s_first, s_last; - int erased; - int rcode = 0; - - erased = 0; - - for (bank=0,info = &flash_info[0]; bank < CONFIG_SYS_MAX_FLASH_BANKS; ++bank, ++info) { - ulong b_end; - int sect; - - if (info->flash_id == FLASH_UNKNOWN) { - continue; - } - - b_end = info->start[0] + info->size - 1; /* bank end addr */ - - s_first = -1; /* first sector to erase */ - s_last = -1; /* last sector to erase */ - - for (sect=0; sect < info->sector_count; ++sect) { - ulong end; /* last address in current sect */ - short s_end; - - s_end = info->sector_count - 1; - - end = (sect == s_end) ? b_end : info->start[sect + 1] - 1; - - if (addr_first > end) - continue; - if (addr_last < info->start[sect]) - continue; - - if (addr_first == info->start[sect]) { - s_first = sect; - } - if (addr_last == end) { - s_last = sect; - } - } - if (s_first>=0 && s_first<=s_last) { - erased += s_last - s_first + 1; - rcode = flash_erase (info, s_first, s_last); - } - } - if (erased) { - /* printf ("Erased %d sectors\n", erased); */ - } else { - printf ("Error: start and/or end address" - " not on sector boundary\n"); - rcode = 1; - } - return rcode; -} - - -int do_protect(cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[]) -{ - flash_info_t *info; - ulong bank, addr_first, addr_last; - int i, p, n, sect_first, sect_last; - int rcode = 0; - - if (argc < 3) - return cmd_usage(cmdtp); - - if (strcmp(argv[1], "off") == 0) - p = 0; - else if (strcmp(argv[1], "on") == 0) - p = 1; - else - return cmd_usage(cmdtp); - - if (strcmp(argv[2], "all") == 0) { - for (bank=1; bank<=CONFIG_SYS_MAX_FLASH_BANKS; ++bank) { - info = &flash_info[bank-1]; - if (info->flash_id == FLASH_UNKNOWN) { - continue; - } - /*printf ("%sProtect Flash Bank # %ld\n", */ - /* p ? "" : "Un-", bank); */ - - for (i=0; i<info->sector_count; ++i) { -#if defined(CONFIG_SYS_FLASH_PROTECTION) - if (flash_real_protect(info, i, p)) - rcode = 1; - putc ('.'); -#else - info->protect[i] = p; -#endif /* CONFIG_SYS_FLASH_PROTECTION */ - } - } - -#if defined(CONFIG_SYS_FLASH_PROTECTION) - if (!rcode) puts (" done\n"); -#endif /* CONFIG_SYS_FLASH_PROTECTION */ - - return rcode; - } - - if ((n = abbrev_spec(argv[2], &info, §_first, §_last)) != 0) { - if (n < 0) { - printf("Bad sector specification\n"); - return 1; - } - /*printf("%sProtect Flash Sectors %d-%d in Bank # %d\n", */ - /* p ? "" : "Un-", sect_first, sect_last, */ - /* (info-flash_info)+1); */ - for (i = sect_first; i <= sect_last; i++) { -#if defined(CONFIG_SYS_FLASH_PROTECTION) - if (flash_real_protect(info, i, p)) - rcode = 1; - putc ('.'); -#else - info->protect[i] = p; -#endif /* CONFIG_SYS_FLASH_PROTECTION */ - } - -#if defined(CONFIG_SYS_FLASH_PROTECTION) - if (!rcode) puts (" done\n"); -#endif /* CONFIG_SYS_FLASH_PROTECTION */ - - return rcode; - } - - if (argc != 4) - return cmd_usage(cmdtp); - - if (strcmp(argv[2], "bank") == 0) { - bank = simple_strtoul(argv[3], NULL, 16); - if ((bank < 1) || (bank > CONFIG_SYS_MAX_FLASH_BANKS)) { - printf ("Only FLASH Banks # 1 ... # %d supported\n", - CONFIG_SYS_MAX_FLASH_BANKS); - return 1; - } - printf ("%sProtect Flash Bank # %ld\n", - p ? "" : "Un-", bank); - info = &flash_info[bank-1]; - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return 1; - } - for (i=0; i<info->sector_count; ++i) { -#if defined(CONFIG_SYS_FLASH_PROTECTION) - if (flash_real_protect(info, i, p)) - rcode = 1; - putc ('.'); -#else - info->protect[i] = p; -#endif /* CONFIG_SYS_FLASH_PROTECTION */ - } - -#if defined(CONFIG_SYS_FLASH_PROTECTION) - if (!rcode) - puts(" done\n"); -#endif /* CONFIG_SYS_FLASH_PROTECTION */ - - return rcode; - } - - addr_first = simple_strtoul(argv[2], NULL, 16); - addr_last = simple_strtoul(argv[3], NULL, 16); - - if (addr_first >= addr_last) - return cmd_usage(cmdtp); - - return flash_sect_protect (p, addr_first, addr_last); -} -int flash_sect_protect (int p, ulong addr_first, ulong addr_last) -{ - flash_info_t *info; - ulong bank; - int s_first, s_last; - int protected, i; - int rcode = 0; - - protected = 0; - - for (bank=0,info = &flash_info[0]; bank < CONFIG_SYS_MAX_FLASH_BANKS; ++bank, ++info) { - ulong b_end; - int sect; - - if (info->flash_id == FLASH_UNKNOWN) { - continue; - } - - b_end = info->start[0] + info->size - 1; /* bank end addr */ - - s_first = -1; /* first sector to erase */ - s_last = -1; /* last sector to erase */ - - for (sect=0; sect < info->sector_count; ++sect) { - ulong end; /* last address in current sect */ - short s_end; - - s_end = info->sector_count - 1; - - end = (sect == s_end) ? b_end : info->start[sect + 1] - 1; - - if (addr_first > end) - continue; - if (addr_last < info->start[sect]) - continue; - - if (addr_first == info->start[sect]) { - s_first = sect; - } - if (addr_last == end) { - s_last = sect; - } - } - if (s_first>=0 && s_first<=s_last) { - protected += s_last - s_first + 1; - for (i=s_first; i<=s_last; ++i) { -#if defined(CONFIG_SYS_FLASH_PROTECTION) - if (flash_real_protect(info, i, p)) - rcode = 1; - putc ('.'); -#else - info->protect[i] = p; -#endif /* CONFIG_SYS_FLASH_PROTECTION */ - } - } -#if defined(CONFIG_SYS_FLASH_PROTECTION) - if (!rcode) putc ('\n'); -#endif /* CONFIG_SYS_FLASH_PROTECTION */ - - } - if (protected) { - /* printf ("%sProtected %d sectors\n", */ - /* p ? "" : "Un-", protected); */ - } else { - printf ("Error: start and/or end address" - " not on sector boundary\n"); - rcode = 1; - } - return rcode; -} - -#endif diff --git a/tools/updater/ctype.c b/tools/updater/ctype.c deleted file mode 100644 index 96fa9ed114..0000000000 --- a/tools/updater/ctype.c +++ /dev/null @@ -1,40 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * linux/lib/ctype.c - * - * Copyright (C) 1991, 1992 Linus Torvalds - */ - -#include <linux/ctype.h> - -unsigned char _ctype[] = { -_C,_C,_C,_C,_C,_C,_C,_C, /* 0-7 */ -_C,_C|_S,_C|_S,_C|_S,_C|_S,_C|_S,_C,_C, /* 8-15 */ -_C,_C,_C,_C,_C,_C,_C,_C, /* 16-23 */ -_C,_C,_C,_C,_C,_C,_C,_C, /* 24-31 */ -_S|_SP,_P,_P,_P,_P,_P,_P,_P, /* 32-39 */ -_P,_P,_P,_P,_P,_P,_P,_P, /* 40-47 */ -_D,_D,_D,_D,_D,_D,_D,_D, /* 48-55 */ -_D,_D,_P,_P,_P,_P,_P,_P, /* 56-63 */ -_P,_U|_X,_U|_X,_U|_X,_U|_X,_U|_X,_U|_X,_U, /* 64-71 */ -_U,_U,_U,_U,_U,_U,_U,_U, /* 72-79 */ -_U,_U,_U,_U,_U,_U,_U,_U, /* 80-87 */ -_U,_U,_U,_P,_P,_P,_P,_P, /* 88-95 */ -_P,_L|_X,_L|_X,_L|_X,_L|_X,_L|_X,_L|_X,_L, /* 96-103 */ -_L,_L,_L,_L,_L,_L,_L,_L, /* 104-111 */ -_L,_L,_L,_L,_L,_L,_L,_L, /* 112-119 */ -_L,_L,_L,_P,_P,_P,_P,_C, /* 120-127 */ -0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, /* 128-143 */ -0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, /* 144-159 */ -_S|_SP,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P, /* 160-175 */ -_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P, /* 176-191 */ -_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,_U, /* 192-207 */ -_U,_U,_U,_U,_U,_U,_U,_P,_U,_U,_U,_U,_U,_U,_U,_L, /* 208-223 */ -_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,_L, /* 224-239 */ -_L,_L,_L,_L,_L,_L,_L,_P,_L,_L,_L,_L,_L,_L,_L,_L}; /* 240-255 */ diff --git a/tools/updater/dummy.c b/tools/updater/dummy.c deleted file mode 100644 index 9fe5ac1b1e..0000000000 --- a/tools/updater/dummy.c +++ /dev/null @@ -1 +0,0 @@ -volatile int __dummy = 0xDEADBEEF; diff --git a/tools/updater/flash.c b/tools/updater/flash.c deleted file mode 100644 index 5388872074..0000000000 --- a/tools/updater/flash.c +++ /dev/null @@ -1,168 +0,0 @@ -/* - * (C) Copyright 2000-2006 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <flash.h> - -extern flash_info_t flash_info[]; /* info for FLASH chips */ - -/*----------------------------------------------------------------------- - * Functions - */ - -/*----------------------------------------------------------------------- - * Set protection status for monitor sectors - * - * The monitor is always located in the _first_ Flash bank. - * If necessary you have to map the second bank at lower addresses. - */ -void -flash_protect (int flag, ulong from, ulong to, flash_info_t *info) -{ - ulong b_end = info->start[0] + info->size - 1; /* bank end address */ - short s_end = info->sector_count - 1; /* index of last sector */ - int i; - - /* Do nothing if input data is bad. */ - if (info->sector_count == 0 || info->size == 0 || to < from) { - return; - } - - /* There is nothing to do if we have no data about the flash - * or the protect range and flash range don't overlap. - */ - if (info->flash_id == FLASH_UNKNOWN || - to < info->start[0] || from > b_end) { - return; - } - - for (i=0; i<info->sector_count; ++i) { - ulong end; /* last address in current sect */ - - end = (i == s_end) ? b_end : info->start[i + 1] - 1; - - /* Update protection if any part of the sector - * is in the specified range. - */ - if (from <= end && to >= info->start[i]) { - if (flag & FLAG_PROTECT_CLEAR) { -#if defined(CONFIG_SYS_FLASH_PROTECTION) - flash_real_protect(info, i, 0); -#else - info->protect[i] = 0; -#endif /* CONFIG_SYS_FLASH_PROTECTION */ - } - else if (flag & FLAG_PROTECT_SET) { -#if defined(CONFIG_SYS_FLASH_PROTECTION) - flash_real_protect(info, i, 1); -#else - info->protect[i] = 1; -#endif /* CONFIG_SYS_FLASH_PROTECTION */ - } - } - } -} - -/*----------------------------------------------------------------------- - */ - -flash_info_t * -addr2info (ulong addr) -{ -#ifndef CONFIG_SPD823TS - flash_info_t *info; - int i; - - for (i=0, info = &flash_info[0]; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) { - if (info->flash_id != FLASH_UNKNOWN && - addr >= info->start[0] && - /* WARNING - The '- 1' is needed if the flash - * is at the end of the address space, since - * info->start[0] + info->size wraps back to 0. - * Please don't change this unless you understand this. - */ - addr <= info->start[0] + info->size - 1) { - return (info); - } - } -#endif /* CONFIG_SPD823TS */ - - return (NULL); -} - -/*----------------------------------------------------------------------- - * Copy memory to flash. - * Make sure all target addresses are within Flash bounds, - * and no protected sectors are hit. - * Returns: - * ERR_OK 0 - OK - * ERR_TIMOUT 1 - write timeout - * ERR_NOT_ERASED 2 - Flash not erased - * ERR_PROTECTED 4 - target range includes protected sectors - * ERR_INVAL 8 - target address not in Flash memory - * ERR_ALIGN 16 - target address not aligned on boundary - * (only some targets require alignment) - */ -int -flash_write (char *src, ulong addr, ulong cnt) -{ -#ifdef CONFIG_SPD823TS - return (ERR_TIMOUT); /* any other error codes are possible as well */ -#else - int i; - ulong end = addr + cnt - 1; - flash_info_t *info_first = addr2info (addr); - flash_info_t *info_last = addr2info (end ); - flash_info_t *info; - int j; - - if (cnt == 0) { - return (ERR_OK); - } - - if (!info_first || !info_last) { - return (ERR_INVAL); - } - - for (info = info_first; info <= info_last; ++info) { - ulong b_end = info->start[0] + info->size; /* bank end addr */ - short s_end = info->sector_count - 1; - for (i=0; i<info->sector_count; ++i) { - ulong e_addr = (i == s_end) ? b_end : info->start[i + 1]; - - if ((end >= info->start[i]) && (addr < e_addr) && - (info->protect[i] != 0) ) { - return (ERR_PROTECTED); - } - } - } - - printf("\rWriting "); - for (j=0; j<20; j++) putc(177); - printf("\rWriting "); - - /* finally write data to flash */ - for (info = info_first; info <= info_last && cnt>0; ++info) { - ulong len; - - len = info->start[0] + info->size - addr; - if (len > cnt) - len = cnt; - - if ((i = write_buff(info, src, addr, len)) != 0) { - return (i); - } - cnt -= len; - addr += len; - src += len; - } - return (ERR_OK); -#endif /* CONFIG_SPD823TS */ -} - -/*----------------------------------------------------------------------- - */ diff --git a/tools/updater/flash_hw.c b/tools/updater/flash_hw.c deleted file mode 100644 index 54a910b178..0000000000 --- a/tools/updater/flash_hw.c +++ /dev/null @@ -1,643 +0,0 @@ -/* - * (C) Copyright 2001 - * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc. - * - * (C) Copyright 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <flash.h> -#include <asm/io.h> -#include <memio.h> - -/*---------------------------------------------------------------------*/ -#undef DEBUG_FLASH - -#ifdef DEBUG_FLASH -#define DEBUGF(fmt,args...) printf(fmt ,##args) -#else -#define DEBUGF(fmt,args...) -#endif -/*---------------------------------------------------------------------*/ - -flash_info_t flash_info[]; - -static ulong flash_get_size (ulong addr, flash_info_t *info); -static int flash_get_offsets (ulong base, flash_info_t *info); -static int write_word (flash_info_t *info, ulong dest, ulong data); -static void flash_reset (ulong addr); - -int flash_xd_nest; - -static void flash_to_xd(void) -{ - unsigned char x; - - flash_xd_nest ++; - - if (flash_xd_nest == 1) - { - DEBUGF("Flash on XD\n"); - x = pci_read_cfg_byte(0, 0, 0x74); - pci_write_cfg_byte(0, 0, 0x74, x|1); - } -} - -static void flash_to_mem(void) -{ - unsigned char x; - - flash_xd_nest --; - - if (flash_xd_nest == 0) - { - DEBUGF("Flash on memory bus\n"); - x = pci_read_cfg_byte(0, 0, 0x74); - pci_write_cfg_byte(0, 0, 0x74, x&0xFE); - } -} - -unsigned long flash_init_old(void) -{ - int i; - - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) - { - flash_info[i].flash_id = FLASH_UNKNOWN; - flash_info[i].sector_count = 0; - flash_info[i].size = 0; - } - - - return 1; -} - -unsigned long flash_init (void) -{ - unsigned int i; - unsigned long flash_size = 0; - - flash_xd_nest = 0; - - flash_to_xd(); - - /* Init: no FLASHes known */ - for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) { - flash_info[i].flash_id = FLASH_UNKNOWN; - flash_info[i].sector_count = 0; - flash_info[i].size = 0; - } - - DEBUGF("\n## Get flash size @ 0x%08x\n", CONFIG_SYS_FLASH_BASE); - - flash_size = flash_get_size (CONFIG_SYS_FLASH_BASE, flash_info); - - DEBUGF("## Flash bank size: %08lx\n", flash_size); - - if (flash_size) { -#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE && \ - CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_MAX_SIZE - /* monitor protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN - 1, - &flash_info[0]); -#endif - -#ifdef CONFIG_ENV_IS_IN_FLASH - /* ENV protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1, - &flash_info[0]); -#endif - - } else { - printf ("Warning: the BOOT Flash is not initialised !"); - } - - flash_to_mem(); - - return flash_size; -} - -/* - * The following code cannot be run from FLASH! - */ -static ulong flash_get_size (ulong addr, flash_info_t *info) -{ - short i; - uchar value; - uchar *x = (uchar *)addr; - - flash_to_xd(); - - /* Write auto select command: read Manufacturer ID */ - x[0x0555] = 0xAA; - __asm__ volatile ("sync\n eieio"); - x[0x02AA] = 0x55; - __asm__ volatile ("sync\n eieio"); - x[0x0555] = 0x90; - __asm__ volatile ("sync\n eieio"); - - value = x[0]; - __asm__ volatile ("sync\n eieio"); - - DEBUGF("Manuf. ID @ 0x%08lx: 0x%08x\n", (ulong)addr, value); - - switch (value | (value << 16)) { - case AMD_MANUFACT: - info->flash_id = FLASH_MAN_AMD; - break; - - case FUJ_MANUFACT: - info->flash_id = FLASH_MAN_FUJ; - break; - - case STM_MANUFACT: - info->flash_id = FLASH_MAN_STM; - break; - - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - flash_reset (addr); - return 0; - } - - value = x[1]; - __asm__ volatile ("sync\n eieio"); - - DEBUGF("Device ID @ 0x%08lx: 0x%08x\n", addr+1, value); - - switch (value) { - case AMD_ID_F040B: - DEBUGF("Am29F040B\n"); - info->flash_id += FLASH_AM040; - info->sector_count = 8; - info->size = 0x00080000; - break; /* => 512 kB */ - - case AMD_ID_LV040B: - DEBUGF("Am29LV040B\n"); - info->flash_id += FLASH_AM040; - info->sector_count = 8; - info->size = 0x00080000; - break; /* => 512 kB */ - - case AMD_ID_LV400T: - DEBUGF("Am29LV400T\n"); - info->flash_id += FLASH_AM400T; - info->sector_count = 11; - info->size = 0x00100000; - break; /* => 1 MB */ - - case AMD_ID_LV400B: - DEBUGF("Am29LV400B\n"); - info->flash_id += FLASH_AM400B; - info->sector_count = 11; - info->size = 0x00100000; - break; /* => 1 MB */ - - case AMD_ID_LV800T: - DEBUGF("Am29LV800T\n"); - info->flash_id += FLASH_AM800T; - info->sector_count = 19; - info->size = 0x00200000; - break; /* => 2 MB */ - - case AMD_ID_LV800B: - DEBUGF("Am29LV400B\n"); - info->flash_id += FLASH_AM800B; - info->sector_count = 19; - info->size = 0x00200000; - break; /* => 2 MB */ - - case AMD_ID_LV160T: - DEBUGF("Am29LV160T\n"); - info->flash_id += FLASH_AM160T; - info->sector_count = 35; - info->size = 0x00400000; - break; /* => 4 MB */ - - case AMD_ID_LV160B: - DEBUGF("Am29LV160B\n"); - info->flash_id += FLASH_AM160B; - info->sector_count = 35; - info->size = 0x00400000; - break; /* => 4 MB */ - - case AMD_ID_LV320T: - DEBUGF("Am29LV320T\n"); - info->flash_id += FLASH_AM320T; - info->sector_count = 67; - info->size = 0x00800000; - break; /* => 8 MB */ - -#if 0 - /* Has the same ID as AMD_ID_LV320T, to be fixed */ - case AMD_ID_LV320B: - DEBUGF("Am29LV320B\n"); - info->flash_id += FLASH_AM320B; - info->sector_count = 67; - info->size = 0x00800000; - break; /* => 8 MB */ -#endif - - case AMD_ID_LV033C: - DEBUGF("Am29LV033C\n"); - info->flash_id += FLASH_AM033C; - info->sector_count = 64; - info->size = 0x01000000; - break; /* => 16Mb */ - - case STM_ID_F040B: - DEBUGF("M29F040B\n"); - info->flash_id += FLASH_AM040; - info->sector_count = 8; - info->size = 0x00080000; - break; /* => 512 kB */ - - default: - info->flash_id = FLASH_UNKNOWN; - flash_reset (addr); - flash_to_mem(); - return (0); /* => no or unknown flash */ - - } - - if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) { - printf ("** ERROR: sector count %d > max (%d) **\n", - info->sector_count, CONFIG_SYS_MAX_FLASH_SECT); - info->sector_count = CONFIG_SYS_MAX_FLASH_SECT; - } - - if (! flash_get_offsets (addr, info)) { - flash_reset (addr); - flash_to_mem(); - return 0; - } - - /* check for protected sectors */ - for (i = 0; i < info->sector_count; i++) { - /* read sector protection at sector address, (A7 .. A0) = 0x02 */ - /* D0 = 1 if protected */ - value = in8(info->start[i] + 2); - iobarrier_rw(); - info->protect[i] = (value & 1) != 0; - } - - /* - * Reset bank to read mode - */ - flash_reset (addr); - - flash_to_mem(); - - return (info->size); -} - -static int flash_get_offsets (ulong base, flash_info_t *info) -{ - unsigned int i; - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_AM040: - /* set sector offsets for uniform sector type */ - for (i = 0; i < info->sector_count; i++) { - info->start[i] = base + i * info->size / - info->sector_count; - } - break; - default: - return 0; - } - - return 1; -} - -int flash_erase (flash_info_t *info, int s_first, int s_last) -{ - volatile ulong addr = info->start[0]; - int flag, prot, sect, l_sect; - ulong start, now, last; - - flash_to_xd(); - - if (s_first < 0 || s_first > s_last) { - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - } else { - printf ("- no sectors to erase\n"); - } - flash_to_mem(); - return 1; - } - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("Can't erase unknown flash type %08lx - aborted\n", - info->flash_id); - flash_to_mem(); - return 1; - } - - prot = 0; - for (sect=s_first; sect<=s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf (""); - } - - l_sect = -1; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - out8(addr + 0x555, 0xAA); - iobarrier_rw(); - out8(addr + 0x2AA, 0x55); - iobarrier_rw(); - out8(addr + 0x555, 0x80); - iobarrier_rw(); - out8(addr + 0x555, 0xAA); - iobarrier_rw(); - out8(addr + 0x2AA, 0x55); - iobarrier_rw(); - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect<=s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - addr = info->start[sect]; - out8(addr, 0x30); - iobarrier_rw(); - l_sect = sect; - } - } - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* wait at least 80us - let's wait 1 ms */ - udelay (1000); - - /* - * We wait for the last triggered sector - */ - if (l_sect < 0) - goto DONE; - - start = get_timer (0); - last = start; - addr = info->start[l_sect]; - - DEBUGF ("Start erase timeout: %d\n", CONFIG_SYS_FLASH_ERASE_TOUT); - - while ((in8(addr) & 0x80) != 0x80) { - if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - flash_reset (info->start[0]); - flash_to_mem(); - return 1; - } - /* show that we're waiting */ - if ((now - last) > 1000) { /* every second */ - putc ('.'); - last = now; - } - iobarrier_rw(); - } - -DONE: - /* reset to read mode */ - flash_reset (info->start[0]); - flash_to_mem(); - - printf (" done\n"); - return 0; -} - -/* - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) -{ - ulong cp, wp, data; - int i, l, rc; - ulong out_cnt = 0; - - flash_to_xd(); - - wp = (addr & ~3); /* get lower word aligned address */ - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i=0, cp=wp; i<l; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - for (; i<4 && cnt>0; ++i) { - data = (data << 8) | *src++; - --cnt; - ++cp; - } - for (; cnt==0 && i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - - if ((rc = write_word(info, wp, data)) != 0) { - flash_to_mem(); - return (rc); - } - wp += 4; - } - - putc(219); - - /* - * handle word aligned part - */ - while (cnt >= 4) { - if (out_cnt>26214) - { - putc(219); - out_cnt = 0; - } - data = 0; - for (i=0; i<4; ++i) { - data = (data << 8) | *src++; - } - if ((rc = write_word(info, wp, data)) != 0) { - flash_to_mem(); - return (rc); - } - wp += 4; - cnt -= 4; - out_cnt += 4; - } - - if (cnt == 0) { - flash_to_mem(); - return (0); - } - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) { - data = (data << 8) | *src++; - --cnt; - } - for (; i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - - flash_to_mem(); - return (write_word(info, wp, data)); -} - -/* - * Write a word to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_word (flash_info_t *info, ulong dest, ulong data) -{ - volatile ulong addr = info->start[0]; - ulong start; - int i; - - flash_to_xd(); - - /* Check if Flash is (sufficiently) erased */ - if ((in32(dest) & data) != data) { - flash_to_mem(); - return (2); - } - - /* write each byte out */ - for (i = 0; i < 4; i++) { - char *data_ch = (char *)&data; - int flag = disable_interrupts(); - - out8(addr + 0x555, 0xAA); - iobarrier_rw(); - out8(addr + 0x2AA, 0x55); - iobarrier_rw(); - out8(addr + 0x555, 0xA0); - iobarrier_rw(); - out8(dest+i, data_ch[i]); - iobarrier_rw(); - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* data polling for D7 */ - start = get_timer (0); - while ((in8(dest+i) & 0x80) != (data_ch[i] & 0x80)) { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - flash_reset (addr); - flash_to_mem(); - return (1); - } - iobarrier_rw(); - } - } - - flash_reset (addr); - flash_to_mem(); - return (0); -} - -/* - * Reset bank to read mode - */ -static void flash_reset (ulong addr) -{ - flash_to_xd(); - out8(addr, 0xF0); /* reset bank */ - iobarrier_rw(); - flash_to_mem(); -} - -void flash_print_info (flash_info_t *info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_AMD: printf ("AMD "); break; - case FLASH_MAN_FUJ: printf ("FUJITSU "); break; - case FLASH_MAN_BM: printf ("BRIGHT MICRO "); break; - case FLASH_MAN_STM: printf ("SGS THOMSON "); break; - default: printf ("Unknown Vendor "); break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_AM040: printf ("29F040 or 29LV040 (4 Mbit, uniform sectors)\n"); - break; - case FLASH_AM400B: printf ("AM29LV400B (4 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM400T: printf ("AM29LV400T (4 Mbit, top boot sector)\n"); - break; - case FLASH_AM800B: printf ("AM29LV800B (8 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM800T: printf ("AM29LV800T (8 Mbit, top boot sector)\n"); - break; - case FLASH_AM160B: printf ("AM29LV160B (16 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n"); - break; - case FLASH_AM320B: printf ("AM29LV320B (32 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM320T: printf ("AM29LV320T (32 Mbit, top boot sector)\n"); - break; - default: printf ("Unknown Chip Type\n"); - break; - } - - if (info->size % 0x100000 == 0) { - printf (" Size: %ld MB in %d Sectors\n", - info->size / 0x100000, info->sector_count); - } else if (info->size % 0x400 == 0) { - printf (" Size: %ld KB in %d Sectors\n", - info->size / 0x400, info->sector_count); - } else { - printf (" Size: %ld B in %d Sectors\n", - info->size, info->sector_count); - } - - printf (" Sector Start Addresses:"); - for (i=0; i<info->sector_count; ++i) { - if ((i % 5) == 0) - printf ("\n "); - printf (" %08lX%s", - info->start[i], - info->protect[i] ? " (RO)" : " " - ); - } - printf ("\n"); -} diff --git a/tools/updater/junk b/tools/updater/junk deleted file mode 100644 index f73285a832..0000000000 --- a/tools/updater/junk +++ /dev/null @@ -1 +0,0 @@ -................................................................................................................................................................................................................................................................
\ No newline at end of file diff --git a/tools/updater/ppcstring.S b/tools/updater/ppcstring.S deleted file mode 100644 index 8152ac9b0f..0000000000 --- a/tools/updater/ppcstring.S +++ /dev/null @@ -1,213 +0,0 @@ -/* - * String handling functions for PowerPC. - * - * Copyright (C) 1996 Paul Mackerras. - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#include <ppc_asm.tmpl> -#include <asm/errno.h> - - .globl strcpy -strcpy: - addi r5,r3,-1 - addi r4,r4,-1 -1: lbzu r0,1(r4) - cmpwi 0,r0,0 - stbu r0,1(r5) - bne 1b - blr - - .globl strncpy -strncpy: - cmpwi 0,r5,0 - beqlr - mtctr r5 - addi r6,r3,-1 - addi r4,r4,-1 -1: lbzu r0,1(r4) - cmpwi 0,r0,0 - stbu r0,1(r6) - bdnzf 2,1b /* dec ctr, branch if ctr != 0 && !cr0.eq */ - blr - - .globl strcat -strcat: - addi r5,r3,-1 - addi r4,r4,-1 -1: lbzu r0,1(r5) - cmpwi 0,r0,0 - bne 1b - addi r5,r5,-1 -1: lbzu r0,1(r4) - cmpwi 0,r0,0 - stbu r0,1(r5) - bne 1b - blr - - .globl strcmp -strcmp: - addi r5,r3,-1 - addi r4,r4,-1 -1: lbzu r3,1(r5) - cmpwi 1,r3,0 - lbzu r0,1(r4) - subf. r3,r0,r3 - beqlr 1 - beq 1b - blr - - .globl strlen -strlen: - addi r4,r3,-1 -1: lbzu r0,1(r4) - cmpwi 0,r0,0 - bne 1b - subf r3,r3,r4 - blr - - .globl memset -memset: - rlwimi r4,r4,8,16,23 - rlwimi r4,r4,16,0,15 - addi r6,r3,-4 - cmplwi 0,r5,4 - blt 7f - stwu r4,4(r6) - beqlr - andi. r0,r6,3 - add r5,r0,r5 - subf r6,r0,r6 - rlwinm r0,r5,32-2,2,31 - mtctr r0 - bdz 6f -1: stwu r4,4(r6) - bdnz 1b -6: andi. r5,r5,3 -7: cmpwi 0,r5,0 - beqlr - mtctr r5 - addi r6,r6,3 -8: stbu r4,1(r6) - bdnz 8b - blr - - .globl bcopy -bcopy: - mr r6,r3 - mr r3,r4 - mr r4,r6 - b memcpy - - .globl memmove -memmove: - cmplw 0,r3,r4 - bgt backwards_memcpy - /* fall through */ - - .globl memcpy -memcpy: - rlwinm. r7,r5,32-3,3,31 /* r0 = r5 >> 3 */ - addi r6,r3,-4 - addi r4,r4,-4 - beq 2f /* if less than 8 bytes to do */ - andi. r0,r6,3 /* get dest word aligned */ - mtctr r7 - bne 5f -1: lwz r7,4(r4) - lwzu r8,8(r4) - stw r7,4(r6) - stwu r8,8(r6) - bdnz 1b - andi. r5,r5,7 -2: cmplwi 0,r5,4 - blt 3f - lwzu r0,4(r4) - addi r5,r5,-4 - stwu r0,4(r6) -3: cmpwi 0,r5,0 - beqlr - mtctr r5 - addi r4,r4,3 - addi r6,r6,3 -4: lbzu r0,1(r4) - stbu r0,1(r6) - bdnz 4b - blr -5: subfic r0,r0,4 - mtctr r0 -6: lbz r7,4(r4) - addi r4,r4,1 - stb r7,4(r6) - addi r6,r6,1 - bdnz 6b - subf r5,r0,r5 - rlwinm. r7,r5,32-3,3,31 - beq 2b - mtctr r7 - b 1b - - .globl backwards_memcpy -backwards_memcpy: - rlwinm. r7,r5,32-3,3,31 /* r0 = r5 >> 3 */ - add r6,r3,r5 - add r4,r4,r5 - beq 2f - andi. r0,r6,3 - mtctr r7 - bne 5f -1: lwz r7,-4(r4) - lwzu r8,-8(r4) - stw r7,-4(r6) - stwu r8,-8(r6) - bdnz 1b - andi. r5,r5,7 -2: cmplwi 0,r5,4 - blt 3f - lwzu r0,-4(r4) - subi r5,r5,4 - stwu r0,-4(r6) -3: cmpwi 0,r5,0 - beqlr - mtctr r5 -4: lbzu r0,-1(r4) - stbu r0,-1(r6) - bdnz 4b - blr -5: mtctr r0 -6: lbzu r7,-1(r4) - stbu r7,-1(r6) - bdnz 6b - subf r5,r0,r5 - rlwinm. r7,r5,32-3,3,31 - beq 2b - mtctr r7 - b 1b - - .globl memcmp -memcmp: - cmpwi 0,r5,0 - ble- 2f - mtctr r5 - addi r6,r3,-1 - addi r4,r4,-1 -1: lbzu r3,1(r6) - lbzu r0,1(r4) - subf. r3,r0,r3 - bdnzt 2,1b - blr -2: li r3,0 - blr - - .global memchr -memchr: - cmpwi 0,r5,0 - ble- 2f - mtctr r5 - addi r3,r3,-1 -1: lbzu r0,1(r3) - cmpw 0,r0,r4 - bdnzf 2,1b - beqlr -2: li r3,0 - blr diff --git a/tools/updater/string.c b/tools/updater/string.c deleted file mode 100644 index 954fb01e20..0000000000 --- a/tools/updater/string.c +++ /dev/null @@ -1,340 +0,0 @@ -/* - * linux/lib/string.c - * - * Copyright (C) 1991, 1992 Linus Torvalds - */ - -/* - * stupid library routines.. The optimized versions should generally be found - * as inline code in <asm-xx/string.h> - * - * These are buggy as well.. - */ - -#include <linux/types.h> -#include <linux/string.h> -#include <malloc.h> - -#define __HAVE_ARCH_BCOPY -#define __HAVE_ARCH_MEMCMP -#define __HAVE_ARCH_MEMCPY -#define __HAVE_ARCH_MEMMOVE -#define __HAVE_ARCH_MEMSET -#define __HAVE_ARCH_STRCAT -#define __HAVE_ARCH_STRCMP -#define __HAVE_ARCH_STRCPY -#define __HAVE_ARCH_STRLEN -#define __HAVE_ARCH_STRNCPY - -char * ___strtok = NULL; - -#ifndef __HAVE_ARCH_STRCPY -char * strcpy(char * dest,const char *src) -{ - char *tmp = dest; - - while ((*dest++ = *src++) != '\0') - /* nothing */; - return tmp; -} -#endif - -#ifndef __HAVE_ARCH_STRNCPY -char * strncpy(char * dest,const char *src,size_t count) -{ - char *tmp = dest; - - while (count-- && (*dest++ = *src++) != '\0') - /* nothing */; - - return tmp; -} -#endif - -#ifndef __HAVE_ARCH_STRCAT -char * strcat(char * dest, const char * src) -{ - char *tmp = dest; - - while (*dest) - dest++; - while ((*dest++ = *src++) != '\0') - ; - - return tmp; -} -#endif - -#ifndef __HAVE_ARCH_STRNCAT -char * strncat(char *dest, const char *src, size_t count) -{ - char *tmp = dest; - - if (count) { - while (*dest) - dest++; - while ((*dest++ = *src++)) { - if (--count == 0) { - *dest = '\0'; - break; - } - } - } - - return tmp; -} -#endif - -#ifndef __HAVE_ARCH_STRCMP -int strcmp(const char * cs,const char * ct) -{ - register signed char __res; - - while (1) { - if ((__res = *cs - *ct++) != 0 || !*cs++) - break; - } - - return __res; -} -#endif - -#ifndef __HAVE_ARCH_STRNCMP -int strncmp(const char * cs,const char * ct,size_t count) -{ - register signed char __res = 0; - - while (count) { - if ((__res = *cs - *ct++) != 0 || !*cs++) - break; - count--; - } - - return __res; -} -#endif - -#ifndef __HAVE_ARCH_STRCHR -char * strchr(const char * s, int c) -{ - for(; *s != (char) c; ++s) - if (*s == '\0') - return NULL; - return (char *) s; -} -#endif - -#ifndef __HAVE_ARCH_STRRCHR -char * strrchr(const char * s, int c) -{ - const char *p = s + strlen(s); - do { - if (*p == (char)c) - return (char *)p; - } while (--p >= s); - return NULL; -} -#endif - -#ifndef __HAVE_ARCH_STRLEN -size_t strlen(const char * s) -{ - const char *sc; - - for (sc = s; *sc != '\0'; ++sc) - /* nothing */; - return sc - s; -} -#endif - -#ifndef __HAVE_ARCH_STRNLEN -size_t strnlen(const char * s, size_t count) -{ - const char *sc; - - for (sc = s; count-- && *sc != '\0'; ++sc) - /* nothing */; - return sc - s; -} -#endif - -#ifndef __HAVE_ARCH_STRDUP -char * strdup(const char *s) -{ - char *new; - - if ((s == NULL) || - ((new = malloc (strlen(s) + 1)) == NULL) ) { - return NULL; - } - - strcpy (new, s); - return new; -} -#endif - -#ifndef __HAVE_ARCH_STRSPN -size_t strspn(const char *s, const char *accept) -{ - const char *p; - const char *a; - size_t count = 0; - - for (p = s; *p != '\0'; ++p) { - for (a = accept; *a != '\0'; ++a) { - if (*p == *a) - break; - } - if (*a == '\0') - return count; - ++count; - } - - return count; -} -#endif - -#ifndef __HAVE_ARCH_STRPBRK -char * strpbrk(const char * cs,const char * ct) -{ - const char *sc1,*sc2; - - for( sc1 = cs; *sc1 != '\0'; ++sc1) { - for( sc2 = ct; *sc2 != '\0'; ++sc2) { - if (*sc1 == *sc2) - return (char *) sc1; - } - } - return NULL; -} -#endif - -#ifndef __HAVE_ARCH_STRTOK -char * strtok(char * s,const char * ct) -{ - char *sbegin, *send; - - sbegin = s ? s : ___strtok; - if (!sbegin) { - return NULL; - } - sbegin += strspn(sbegin,ct); - if (*sbegin == '\0') { - ___strtok = NULL; - return( NULL ); - } - send = strpbrk( sbegin, ct); - if (send && *send != '\0') - *send++ = '\0'; - ___strtok = send; - return (sbegin); -} -#endif - -#ifndef __HAVE_ARCH_MEMSET -void * memset(void * s,char c,size_t count) -{ - char *xs = (char *) s; - - while (count--) - *xs++ = c; - - return s; -} -#endif - -#ifndef __HAVE_ARCH_BCOPY -char * bcopy(const char * src, char * dest, int count) -{ - char *tmp = dest; - - while (count--) - *tmp++ = *src++; - - return dest; -} -#endif - -#ifndef __HAVE_ARCH_MEMCPY -void * memcpy(void * dest,const void *src,size_t count) -{ - char *tmp = (char *) dest, *s = (char *) src; - - while (count--) - *tmp++ = *s++; - - return dest; -} -#endif - -#ifndef __HAVE_ARCH_MEMMOVE -void * memmove(void * dest,const void *src,size_t count) -{ - char *tmp, *s; - - if (dest <= src) { - tmp = (char *) dest; - s = (char *) src; - while (count--) - *tmp++ = *s++; - } - else { - tmp = (char *) dest + count; - s = (char *) src + count; - while (count--) - *--tmp = *--s; - } - - return dest; -} -#endif - -#ifndef __HAVE_ARCH_MEMCMP -int memcmp(const void * cs,const void * ct,size_t count) -{ - const unsigned char *su1, *su2; - signed char res = 0; - - for( su1 = cs, su2 = ct; 0 < count; ++su1, ++su2, count--) - if ((res = *su1 - *su2) != 0) - break; - return res; -} -#endif - -/* - * find the first occurrence of byte 'c', or 1 past the area if none - */ -#ifndef __HAVE_ARCH_MEMSCAN -void * memscan(void * addr, int c, size_t size) -{ - unsigned char * p = (unsigned char *) addr; - - while (size) { - if (*p == c) - return (void *) p; - p++; - size--; - } - return (void *) p; -} -#endif - -#ifndef __HAVE_ARCH_STRSTR -char * strstr(const char * s1,const char * s2) -{ - int l1, l2; - - l2 = strlen(s2); - if (!l2) - return (char *) s1; - l1 = strlen(s1); - while (l1 >= l2) { - l1--; - if (!memcmp(s1,s2,l2)) - return (char *) s1; - s1++; - } - return NULL; -} -#endif diff --git a/tools/updater/update.c b/tools/updater/update.c deleted file mode 100644 index 18f122ad23..0000000000 --- a/tools/updater/update.c +++ /dev/null @@ -1,63 +0,0 @@ -#include <common.h> -#include <exports.h> - -extern unsigned long __dummy; -void do_reset (void); -void do_updater(void); - -void _main(void) -{ - int i; - printf("U-Boot Firmware Updater\n\n\n"); - printf("****************************************************\n" - "* ATTENTION!! PLEASE READ THIS NOTICE CAREFULLY! *\n" - "****************************************************\n\n" - "This program will update your computer's firmware.\n" - "Do NOT remove the disk, reset the machine, or do\n" - "anything that might disrupt functionality. If this\n"); - printf("Program fails, your computer might be unusable, and\n" - "you will need to return your board for reflashing.\n" - "If you find this too risky, remove the diskette and\n" - "switch off your machine now. Otherwise press the \n" - "SPACE key now to start the process\n\n"); - do - { - char x; - while (!tstc()); - x = getc(); - if (x == ' ') break; - } while (1); - - do_updater(); - - i = 5; - - printf("\nUpdate done. Please remove diskette.\n"); - printf("The machine will automatically reset in %d seconds\n", i); - printf("You can switch off/reset now when the floppy is removed\n\n"); - - while (i) - { - printf("Resetting in %d\r", i); - udelay(1000000); - i--; - } - do_reset(); - while (1); -} - -void do_updater(void) -{ - unsigned long *addr = &__dummy + 65; - unsigned long flash_size = flash_init(); - int rc; - - flash_sect_protect(0, 0xFFF00000, 0xFFF7FFFF); - printf("Erasing "); - flash_sect_erase(0xFFF00000, 0xFFF7FFFF); - printf("Writing "); - rc = flash_write((uchar *)addr, 0xFFF00000, 0x7FFFF); - if (rc != 0) printf("\nFlashing failed due to error %d\n", rc); - else printf("\ndone\n"); - flash_sect_protect(1, 0xFFF00000, 0xFFF7FFFF); -} diff --git a/tools/updater/utils.c b/tools/updater/utils.c deleted file mode 100644 index 61a611876c..0000000000 --- a/tools/updater/utils.c +++ /dev/null @@ -1,148 +0,0 @@ -#include <common.h> -#include <asm/processor.h> -#include <memio.h> -#include <linux/ctype.h> - -static __inline__ unsigned long -get_msr(void) -{ - unsigned long msr; - - asm volatile("mfmsr %0" : "=r" (msr) :); - return msr; -} - -static __inline__ void -set_msr(unsigned long msr) -{ - asm volatile("mtmsr %0" : : "r" (msr)); -} - -static __inline__ unsigned long -get_dec(void) -{ - unsigned long val; - - asm volatile("mfdec %0" : "=r" (val) :); - return val; -} - - -static __inline__ void -set_dec(unsigned long val) -{ - asm volatile("mtdec %0" : : "r" (val)); -} - - -void -enable_interrupts(void) -{ - set_msr (get_msr() | MSR_EE); -} - -/* returns flag if MSR_EE was set before */ -int -disable_interrupts(void) -{ - ulong msr; - - msr = get_msr(); - set_msr (msr & ~MSR_EE); - return ((msr & MSR_EE) != 0); -} - -u8 in8(u32 port) -{ - return in_byte(port); -} - -void out8(u32 port, u8 val) -{ - out_byte(port, val); -} - -unsigned long in32(u32 port) -{ - return in_long(port); -} - -unsigned long simple_strtoul(const char *cp,char **endp,unsigned int base) -{ - unsigned long result = 0,value; - - if (*cp == '0') { - cp++; - if ((*cp == 'x') && isxdigit(cp[1])) { - base = 16; - cp++; - } - if (!base) { - base = 8; - } - } - if (!base) { - base = 10; - } - while (isxdigit(*cp) && (value = isdigit(*cp) ? *cp-'0' : (islower(*cp) - ? toupper(*cp) : *cp)-'A'+10) < base) { - result = result*base + value; - cp++; - } - if (endp) - *endp = (char *)cp; - return result; -} - -long simple_strtol(const char *cp,char **endp,unsigned int base) -{ - if(*cp=='-') - return -simple_strtoul(cp+1,endp,base); - return simple_strtoul(cp,endp,base); -} - -static inline void -soft_restart(unsigned long addr) -{ - /* SRR0 has system reset vector, SRR1 has default MSR value */ - /* rfi restores MSR from SRR1 and sets the PC to the SRR0 value */ - - __asm__ __volatile__ ("mtspr 26, %0" :: "r" (addr)); - __asm__ __volatile__ ("li 4, (1 << 6)" ::: "r4"); - __asm__ __volatile__ ("mtspr 27, 4"); - __asm__ __volatile__ ("rfi"); - - while(1); /* not reached */ -} - -void -do_reset (void) -{ - ulong addr; - /* flush and disable I/D cache */ - __asm__ __volatile__ ("mfspr 3, 1008" ::: "r3"); - __asm__ __volatile__ ("ori 5, 5, 0xcc00" ::: "r5"); - __asm__ __volatile__ ("ori 4, 3, 0xc00" ::: "r4"); - __asm__ __volatile__ ("andc 5, 3, 5" ::: "r5"); - __asm__ __volatile__ ("sync"); - __asm__ __volatile__ ("mtspr 1008, 4"); - __asm__ __volatile__ ("isync"); - __asm__ __volatile__ ("sync"); - __asm__ __volatile__ ("mtspr 1008, 5"); - __asm__ __volatile__ ("isync"); - __asm__ __volatile__ ("sync"); - -#ifdef CONFIG_SYS_RESET_ADDRESS - addr = CONFIG_SYS_RESET_ADDRESS; -#else - /* - * note: when CONFIG_SYS_MONITOR_BASE points to a RAM address, - * CONFIG_SYS_MONITOR_BASE - sizeof (ulong) is usually a valid - * address. Better pick an address known to be invalid on your - * system and assign it to CONFIG_SYS_RESET_ADDRESS. - */ - addr = CONFIG_SYS_MONITOR_BASE - sizeof (ulong); -#endif - soft_restart(addr); - while(1); /* not reached */ -} |