diff options
| -rw-r--r-- | arch/arm/dts/Makefile | 1 | ||||
| -rw-r--r-- | arch/arm/dts/rk3368-lion-haikou-u-boot.dtsi | 119 | ||||
| -rw-r--r-- | arch/arm/dts/rk3368-lion-haikou.dts | 144 | ||||
| -rw-r--r-- | arch/arm/dts/rk3368-lion.dtsi | 318 | ||||
| -rw-r--r-- | arch/arm/mach-rockchip/rk3368/Kconfig | 22 | ||||
| -rw-r--r-- | board/theobroma-systems/lion_rk3368/Kconfig | 18 | ||||
| -rw-r--r-- | board/theobroma-systems/lion_rk3368/MAINTAINERS | 10 | ||||
| -rw-r--r-- | board/theobroma-systems/lion_rk3368/README | 78 | ||||
| -rw-r--r-- | configs/lion-rk3368_defconfig | 110 | ||||
| -rw-r--r-- | doc/board/rockchip/rockchip.rst | 1 | ||||
| -rw-r--r-- | include/configs/lion_rk3368.h | 16 |
11 files changed, 0 insertions, 837 deletions
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 45af766207..784463e0d8 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -83,7 +83,6 @@ dtb-$(CONFIG_ROCKCHIP_RK3288) += \ rk3288-vyasa.dtb dtb-$(CONFIG_ROCKCHIP_RK3368) += \ - rk3368-lion-haikou.dtb \ rk3368-sheep.dtb \ rk3368-geekbox.dtb \ rk3368-px5-evb.dtb \ diff --git a/arch/arm/dts/rk3368-lion-haikou-u-boot.dtsi b/arch/arm/dts/rk3368-lion-haikou-u-boot.dtsi deleted file mode 100644 index a3c2b707e9..0000000000 --- a/arch/arm/dts/rk3368-lion-haikou-u-boot.dtsi +++ /dev/null @@ -1,119 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ OR X11 -/* - * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH - */ - -#include "rk3368-u-boot.dtsi" - -/ { - config { - u-boot,spl-payload-offset = <0x40000>; /* @ 256KB */ - u-boot,mmc-env-offset = <0x4000>; /* @ 16KB */ - }; - - chosen { - stdout-path = "serial0:115200n8"; - u-boot,spl-boot-order = &emmc, &sdmmc; - }; - - smbios { - compatible = "u-boot,sysinfo-smbios"; - - smbios { - system { - manufacturer = "rockchip"; - product = "sheep_rk3368"; - }; - - baseboard { - manufacturer = "rockchip"; - product = "sheep_rk3368"; - }; - - chassis { - manufacturer = "rockchip"; - product = "sheep_rk3368"; - }; - }; - }; -}; - -&gpio2 { - bootph-all; -}; - -&pinctrl { - bootph-all; -}; - -&service_msch { - bootph-all; -}; - -&dmc { - bootph-all; - - /* - * Validation of throughput using SPEC2000 shows the following - * relative performance for the different memory schedules: - * - CBDR: 30.1 - * - CBRD: 29.8 - * - CRBD: 29.9 - * Note that the best performance for any given application workload - * may vary from the default configured here (e.g. 164.gzip is fastest - * with CBRD, whereas 252.eon and 186.crafty are fastest with CRBD). - * - * See doc/device-tree-bindings/clock/rockchip,rk3368-dmc.txt for - * details on the 'rockchip,memory-schedule' property and how it - * affects the physical-address to device-address mapping. - */ - rockchip,memory-schedule = <DMC_MSCH_CBDR>; - rockchip,ddr-frequency = <800000000>; - rockchip,ddr-speed-bin = <DDR3_1600K>; - - status = "okay"; -}; - -&pmugrf { - bootph-all; -}; - -&sgrf { - bootph-all; -}; - -&cru { - bootph-all; -}; - -&grf { - bootph-all; -}; - -&uart0 { - bootph-all; -}; - -&emmc { - bootph-pre-ram; -}; - -&sdmmc { - bootph-pre-ram; -}; - -&spi1 { - bootph-pre-ram; - - spiflash: w25q32dw@0 { - bootph-pre-ram; - }; -}; - -&timer0 { - bootph-all; - clock-frequency = <24000000>; - status = "okay"; -}; - - diff --git a/arch/arm/dts/rk3368-lion-haikou.dts b/arch/arm/dts/rk3368-lion-haikou.dts deleted file mode 100644 index cae01d35b9..0000000000 --- a/arch/arm/dts/rk3368-lion-haikou.dts +++ /dev/null @@ -1,144 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2018 Theobroma Systems Design und Consulting GmbH - */ - -/dts-v1/; -#include "rk3368-lion.dtsi" - -/ { - model = "Theobroma Systems RK3368-uQ7 Baseboard"; - compatible = "tsd,rk3368-lion-haikou", "rockchip,rk3368"; - - aliases { - mmc1 = &sdmmc; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - i2cmux2 { - i2c@0 { - eeprom: eeprom@50 { - compatible = "atmel,24c01"; - pagesize = <8>; - reg = <0x50>; - }; - }; - }; - - leds { - pinctrl-0 = <&module_led_pins>, <&sd_card_led_pin>; - - sd_card_led: led-3 { - label = "sd_card_led"; - gpios = <&gpio0 RK_PD2 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "mmc0"; - }; - }; - - dc_12v: dc-12v { - compatible = "regulator-fixed"; - regulator-name = "dc_12v"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - }; - - vcc3v3_baseboard: vcc3v3-baseboard { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3_baseboard"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&dc_12v>; - }; - - vcc5v0_otg: vcc5v0-otg-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&otg_vbus_drv>; - regulator-name = "vcc5v0_otg"; - regulator-always-on; - }; -}; - -&sdmmc { - bus-width = <4>; - cap-mmc-highspeed; - cap-sd-highspeed; - cd-gpios = <&gpio2 RK_PB3 GPIO_ACTIVE_LOW>; - disable-wp; - max-frequency = <25000000>; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; - rockchip,default-sample-phase = <90>; - vmmc-supply = <&vcc3v3_baseboard>; - status = "okay"; -}; - -&spi2 { - cs-gpios = <0>, <&gpio2 RK_PC3 GPIO_ACTIVE_LOW>; - status = "okay"; -}; - -&usb_otg { - dr_mode = "otg"; - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; - status = "okay"; -}; - -&uart1 { - /* alternate function of GPIO5/6 */ - status = "disabled"; -}; - -&pinctrl { - pinctrl-names = "default"; - pinctrl-0 = <&haikou_pin_hog>; - - hog { - haikou_pin_hog: haikou-pin-hog { - rockchip,pins = - /* LID_BTN */ - <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>, - /* BATLOW# */ - <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>, - /* SLP_BTN# */ - <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>, - /* BIOS_DISABLE# */ - <3 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - leds { - sd_card_led_pin: sd-card-led-pin { - rockchip,pins = - <0 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - sdmmc { - sdmmc_cd_pin: sdmmc-cd-pin { - rockchip,pins = - <2 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - usb_otg { - otg_vbus_drv: otg-vbus-drv { - rockchip,pins = - <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; diff --git a/arch/arm/dts/rk3368-lion.dtsi b/arch/arm/dts/rk3368-lion.dtsi deleted file mode 100644 index bcd7977fb0..0000000000 --- a/arch/arm/dts/rk3368-lion.dtsi +++ /dev/null @@ -1,318 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2018 Theobroma Systems Design und Consulting GmbH - */ - -/dts-v1/; -#include "rk3368.dtsi" - -/ { - aliases { - mmc0 = &emmc; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - ext_gmac: gmac-clk { - compatible = "fixed-clock"; - clock-frequency = <125000000>; - clock-output-names = "ext_gmac"; - #clock-cells = <0>; - }; - - i2cmux1 { - compatible = "i2c-mux-gpio"; - #address-cells = <1>; - #size-cells = <0>; - i2c-parent = <&i2c1>; - mux-gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_HIGH>; - - /* Q7_GPO_I2C */ - i2c@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - }; - - /* Q7_SMB */ - i2c@1 { - reg = <1>; - #address-cells = <1>; - #size-cells = <0>; - }; - }; - - i2cmux2 { - compatible = "i2c-mux-gpio"; - #address-cells = <1>; - #size-cells = <0>; - i2c-parent = <&i2c2>; - mux-gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_HIGH>; - - /* Q7_LVDS_BLC_I2C */ - i2c@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - - fan: fan@18 { - compatible = "ti,amc6821"; - reg = <0x18>; - #cooling-cells = <2>; - }; - - rtc_twi: rtc@6f { - compatible = "isil,isl1208"; - reg = <0x6f>; - }; - }; - - /* Q7_GP2_I2C */ - i2c@1 { - reg = <1>; - #address-cells = <1>; - #size-cells = <0>; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&module_led_pins>; - - module_led1: led-1 { - label = "module_led1"; - gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - panic-indicator; - }; - - module_led2: led-2 { - label = "module_led2"; - gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - }; - - vcc_sys: vcc-sys-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc_sys"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - }; -}; - -&cpu_l0 { - cpu-supply = <&vdd_cpu>; -}; - -&cpu_l1 { - cpu-supply = <&vdd_cpu>; -}; - -&cpu_l2 { - cpu-supply = <&vdd_cpu>; -}; - -&cpu_l3 { - cpu-supply = <&vdd_cpu>; -}; - -&cpu_b0 { - cpu-supply = <&vdd_cpu>; -}; - -&cpu_b1 { - cpu-supply = <&vdd_cpu>; -}; - -&cpu_b2 { - cpu-supply = <&vdd_cpu>; -}; - -&cpu_b3 { - cpu-supply = <&vdd_cpu>; -}; - -&emmc { - bus-width = <8>; - clock-frequency = <150000000>; - mmc-hs200-1_8v; - non-removable; - vmmc-supply = <&vcc33_io>; - vqmmc-supply = <&vcc18_io>; - pinctrl-names = "default"; - pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>; - status = "okay"; -}; - -&gmac { - assigned-clocks = <&cru SCLK_MAC>; - assigned-clock-parents = <&ext_gmac>; - clock_in_out = "input"; - phy-supply = <&vcc33_io>; - phy-mode = "rgmii"; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 50000>; - snps,reset-gpio = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>; - tx_delay = <0x10>; - rx_delay = <0x10>; - status = "okay"; -}; - -&i2c0 { - status = "okay"; - - rk808: pmic@1b { - compatible = "rockchip,rk808"; - reg = <0x1b>; - interrupt-parent = <&gpio0>; - interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>; - clock-output-names = "xin32k", "rk808-clkout2"; - #clock-cells = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int_l>, <&pmic_sleep>; - rockchip,system-power-controller; - vcc1-supply = <&vcc_sys>; - vcc2-supply = <&vcc_sys>; - vcc3-supply = <&vcc_sys>; - vcc4-supply = <&vcc_sys>; - vcc6-supply = <&vcc_sys>; - vcc7-supply = <&vcc_sys>; - vcc8-supply = <&vcc_sys>; - vcc9-supply = <&vcc_sys>; - vcc10-supply = <&vcc_sys>; - vcc11-supply = <&vcc_sys>; - vcc12-supply = <&vcc_sys>; - - regulators { - vdd_cpu: DCDC_REG1 { - regulator-name = "vdd_cpu"; - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; - }; - - vdd_log: DCDC_REG2 { - regulator-name = "vdd_log"; - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; - }; - - vcc_ddr: DCDC_REG3 { - regulator-name = "vcc_ddr"; - regulator-always-on; - regulator-boot-on; - }; - - vcc33_io: DCDC_REG4 { - regulator-name = "vcc33_io"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - }; - - vcc33_video: LDO_REG2 { - regulator-name = "vcc33_video"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - }; - - vdd10_pll: LDO_REG3 { - regulator-name = "vdd10_pll"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-boot-on; - }; - - vcc18_io: LDO_REG4 { - regulator-name = "vcc18_io"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - }; - - vdd10_video: LDO_REG6 { - regulator-name = "vdd10_video"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-boot-on; - }; - - vcc18_video: LDO_REG8 { - regulator-name = "vcc18_video"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - }; - }; -}; - -&i2c1 { - status = "okay"; -}; - -&i2c2 { - status = "okay"; -}; - -&pinctrl { - leds { - module_led_pins: module-led-pins { - rockchip,pins = - <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>, - <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - pmic { - pmic_int_l: pmic-int-l { - rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; - }; - - pmic_sleep: pmic-sleep { - rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>; - }; - }; -}; - -&spi1 { - status = "okay"; - - norflash: flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <50000000>; - }; -}; - -&uart1 { - status = "okay"; -}; - -&uart3 { - status = "okay"; -}; - -&usb_host0_ehci { - status = "okay"; -}; - -&wdt { - status = "okay"; -}; diff --git a/arch/arm/mach-rockchip/rk3368/Kconfig b/arch/arm/mach-rockchip/rk3368/Kconfig index 3de695186e..a7be30bbd8 100644 --- a/arch/arm/mach-rockchip/rk3368/Kconfig +++ b/arch/arm/mach-rockchip/rk3368/Kconfig @@ -3,27 +3,6 @@ if ROCKCHIP_RK3368 choice prompt "RK3368 board" -config TARGET_LION_RK3368 - bool "Theobroma Systems RK3368-uQ7 (Lion) module" - select ARCH_EARLY_INIT_R - help - The RK3368-uQ7 is a micro-Qseven form-factor (40mm x 70mm, - MXM-230 connector) system-on-module designed by Theobroma - Systems for industrial applications. - - It provides the following features: - - 8x Cortex-A53 (in 2 clusters of 4 cores each) - - (on-module) up to 4GB of DDR3 memory - - (on-module) SPI-NOR flash - - (on-module) eMMC - - Gigabit Ethernet (with an on-module KSZ9031 PHY) - - USB - - HDMI - - MIPI-DSI/single-channel LVDS (muxed on the 'LVDS-A' pin-group) - - various 'slow' interfaces (e.g. UART, SPI, I2C, I2S, ...) - - on-module STM32 providing CAN, RTC and fan-control - - (optional on-module) EAL4+-certified security module - config TARGET_SHEEP bool "Sheep board" help @@ -62,7 +41,6 @@ config SPL_LIBCOMMON_SUPPORT config SPL_LIBGENERIC_SUPPORT default y -source "board/theobroma-systems/lion_rk3368/Kconfig" source "board/rockchip/sheep_rk3368/Kconfig" source "board/geekbuying/geekbox/Kconfig" source "board/rockchip/evb_px5/Kconfig" diff --git a/board/theobroma-systems/lion_rk3368/Kconfig b/board/theobroma-systems/lion_rk3368/Kconfig deleted file mode 100644 index 537a2e7d9a..0000000000 --- a/board/theobroma-systems/lion_rk3368/Kconfig +++ /dev/null @@ -1,18 +0,0 @@ -if TARGET_LION_RK3368 - -config SYS_BOARD - default "lion_rk3368" - -config SYS_VENDOR - default "theobroma-systems" - -config SYS_CONFIG_NAME - default "lion_rk3368" - -config ENV_SIZE - default 0x2000 - -config ENV_OFFSET - default 0x3c000 if ENV_IS_IN_SPI_FLASH - -endif diff --git a/board/theobroma-systems/lion_rk3368/MAINTAINERS b/board/theobroma-systems/lion_rk3368/MAINTAINERS deleted file mode 100644 index ed35fee646..0000000000 --- a/board/theobroma-systems/lion_rk3368/MAINTAINERS +++ /dev/null @@ -1,10 +0,0 @@ -LION-RK3368 (RK3368-uQ7 system-on-module) -M: Quentin Schulz <quentin.schulz@cherry.de> -M: Klaus Goger <klaus.goger@cherry.de> -S: Maintained -F: board/theobroma-systems/lion_rk3368 -F: include/configs/lion_rk3368.h -F: arch/arm/dts/rk3368-lion.dts -F: configs/lion-rk3368_defconfig -W: https://www.theobroma-systems.com/rk3368-uq7/tech-specs -T: git git://git.theobroma-systems.com/lion-u-boot.git diff --git a/board/theobroma-systems/lion_rk3368/README b/board/theobroma-systems/lion_rk3368/README deleted file mode 100644 index 7488b18326..0000000000 --- a/board/theobroma-systems/lion_rk3368/README +++ /dev/null @@ -1,78 +0,0 @@ -Here is the step-by-step to boot to U-Boot on RK3368-uQ7 - -Get the Source and build ATF -============================ - - > git clone git://git.theobroma-systems.com/arm-trusted-firmware.git - > cd arm-trusted-firmware - > make CROSS_COMPILE=aarch64-linux-gnu- PLAT=rk3368 bl31 - > cp build/rk3368/release/bl31.bin ../u-boot/bl31-rk3368.bin - -Configure U-Boot -================ - - > cd ../u-boot - > make lion-rk3368_defconfig - -Build the TPL/SPL stage -======================= - - > make CROSS_COMPILE=aarch64-unknown-elf- - -Build the full U-Boot and a FIT image including the ATF -======================================================= - - > make CROSS_COMPILE=aarch64-unknown-elf- u-boot.itb - -Flash the image -=============== - -Copy the SPL to offset 32k and the FIT image containing the payloads -(U-Boot proper, ATF, devicetree) to offset 256k card. - -SD-Card -------- - - > dd if=idbloader.img of=/dev/sdb seek=64 - > dd if=u-boot.itb of=/dev/sdb seek=512 - -eMMC ----- - -rkdeveloptool allows to flash the on-board eMMC via the USB OTG interface with -help of the Rockchip loader binary. - - > git clone https://github.com/rockchip-linux/rkdeveloptool - > cd rkdeveloptool - > autoreconf -i && && ./configure && make - > git clone https://github.com/rockchip-linux/rkbin.git - > ./rkdeveloptool db rkbin/rk33/rk3368_loader_v2.00.256.bin - > ./rkdeveloptool wl 64 ../spl.img - > ./rkdeveloptool wl 512 ../u-boot.itb - - -If everything went according to plan, you should see the following -output on UART0: - -<debug_uart> U-Boot TPL board init -Trying to boot from BOOTROM -Returning to boot ROM... -Trying to boot from MMC1 -NOTICE: BL31: v1.3(release):v1.2-1320-gbf43a443 -NOTICE: BL31: Built : 18:04:47, Jul 5 2017 - - -U-Boot 2017.07-00158-g2395e99858 (Jul 18 2017 - 21:03:31 +0200) - -Model: Theobroma Systems RK3368-uQ7 SoM -DRAM: 2 GiB -MMC: dwmmc@ff0c0000: 1, dwmmc@ff0f0000: 0 -Using default environment - -In: serial@ff180000 -Out: serial@ff180000 -Err: serial@ff180000 -Net: -Warning: ethernet@ff290000 (eth0) using random MAC address - d2:69:35:7e:d0:1e -eth0: ethernet@ff290000 -Hit any key to stop autoboot: 2 diff --git a/configs/lion-rk3368_defconfig b/configs/lion-rk3368_defconfig deleted file mode 100644 index 868eeaf6c8..0000000000 --- a/configs/lion-rk3368_defconfig +++ /dev/null @@ -1,110 +0,0 @@ -CONFIG_ARM=y -CONFIG_SKIP_LOWLEVEL_INIT=y -CONFIG_COUNTER_FREQUENCY=24000000 -CONFIG_ARCH_ROCKCHIP=y -CONFIG_TEXT_BASE=0x00200000 -CONFIG_NR_DRAM_BANKS=1 -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000 -CONFIG_ENV_OFFSET=0x3F8000 -CONFIG_DEFAULT_DEVICE_TREE="rk3368-lion-haikou" -CONFIG_SPL_TEXT_BASE=0x00000000 -CONFIG_ROCKCHIP_RK3368=y -CONFIG_TPL_LIBCOMMON_SUPPORT=y -CONFIG_TPL_LIBGENERIC_SUPPORT=y -CONFIG_SPL_DRIVERS_MISC=y -CONFIG_SPL_STACK=0x188000 -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y -CONFIG_SPL_BSS_START_ADDR=0x400000 -CONFIG_SPL_BSS_MAX_SIZE=0x20000 -CONFIG_SPL_STACK_R=y -CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000 -CONFIG_SPL=y -CONFIG_DEBUG_UART_BASE=0xFF180000 -CONFIG_DEBUG_UART_CLOCK=24000000 -CONFIG_SPL_SPI_FLASH_SUPPORT=y -CONFIG_SPL_SPI=y -CONFIG_SYS_LOAD_ADDR=0x800800 -CONFIG_DEBUG_UART=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_SPL_LOAD_FIT=y -CONFIG_BOOTSTAGE=y -CONFIG_SPL_BOOTSTAGE=y -CONFIG_BOOTSTAGE_REPORT=y -CONFIG_BOOTSTAGE_FDT=y -CONFIG_DEFAULT_FDT_FILE="rockchip/rk3368-lion-haikou.dtb" -# CONFIG_DISPLAY_CPUINFO is not set -CONFIG_DISPLAY_BOARDINFO_LATE=y -CONFIG_SPL_MAX_SIZE=0x40000 -CONFIG_SPL_PAD_TO=0x7f8000 -CONFIG_SPL_BOOTROM_SUPPORT=y -# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x200 -CONFIG_SPL_ATF=y -CONFIG_TPL=y -CONFIG_TPL_SYS_MALLOC_SIMPLE=y -CONFIG_TPL_DRIVERS_MISC=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_MMC=y -CONFIG_CMD_SPI=y -CONFIG_CMD_USB=y -CONFIG_CMD_BOOTSTAGE=y -CONFIG_CMD_REGULATOR=y -CONFIG_CMD_MTDPARTS=y -CONFIG_SPL_OF_CONTROL=y -CONFIG_TPL_OF_CONTROL=y -CONFIG_OF_LIVE=y -CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names interrupt-parent" -CONFIG_TPL_OF_PLATDATA=y -CONFIG_ENV_IS_IN_MMC=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_TPL_DM=y -CONFIG_REGMAP=y -CONFIG_SPL_REGMAP=y -CONFIG_TPL_REGMAP=y -CONFIG_SYSCON=y -CONFIG_SPL_SYSCON=y -CONFIG_TPL_SYSCON=y -CONFIG_CLK=y -CONFIG_SPL_CLK=y -CONFIG_TPL_CLK=y -CONFIG_ROCKCHIP_GPIO=y -CONFIG_SYS_I2C_ROCKCHIP=y -CONFIG_MMC_DW=y -CONFIG_MMC_DW_ROCKCHIP=y -CONFIG_SPI_FLASH_MACRONIX=y -CONFIG_SPI_FLASH_WINBOND=y -CONFIG_PHY_ANEG_TIMEOUT=8000 -CONFIG_PHY_MSCC=y -CONFIG_DM_ETH_PHY=y -CONFIG_ETH_DESIGNWARE=y -CONFIG_RGMII=y -CONFIG_GMAC_ROCKCHIP=y -CONFIG_PINCTRL=y -CONFIG_SPL_PINCTRL=y -CONFIG_DM_PMIC=y -CONFIG_PMIC_RK8XX=y -CONFIG_DM_REGULATOR_FIXED=y -CONFIG_REGULATOR_RK8XX=y -CONFIG_RAM=y -CONFIG_SPL_RAM=y -CONFIG_TPL_RAM=y -CONFIG_DEBUG_UART_SHIFT=2 -CONFIG_DEBUG_UART_ANNOUNCE=y -CONFIG_SYS_NS16550_MEM32=y -CONFIG_ROCKCHIP_SPI=y -CONFIG_SYSINFO=y -CONFIG_SYSINFO_SMBIOS=y -CONFIG_SYSRESET=y -CONFIG_USB=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_GENERIC=y -CONFIG_USB_DWC2=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_DWC2_OTG=y -CONFIG_SPL_TINY_MEMSET=y -CONFIG_LZO=y -CONFIG_ERRNO_STR=y diff --git a/doc/board/rockchip/rockchip.rst b/doc/board/rockchip/rockchip.rst index eaf71673b7..bac12f055b 100644 --- a/doc/board/rockchip/rockchip.rst +++ b/doc/board/rockchip/rockchip.rst @@ -72,7 +72,6 @@ List of mainline supported Rockchip boards: - GeekBox (geekbox) - PX5 EVB (evb-px5) - Rockchip Sheep (sheep-rk3368) - - Theobroma Systems RK3368-uQ7 SoM - Lion (lion-rk3368) * rk3399 - 96boards RK3399 Ficus (ficus-rk3399) - 96boards Rock960 (rock960-rk3399) diff --git a/include/configs/lion_rk3368.h b/include/configs/lion_rk3368.h deleted file mode 100644 index 0d29e1ddc7..0000000000 --- a/include/configs/lion_rk3368.h +++ /dev/null @@ -1,16 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (c) 2017 Theobroma Systems Design und Consulting GmbH - */ - -#ifndef __CONFIGS_LION_RK3368_H -#define __CONFIGS_LION_RK3368_H - -#include <configs/rk3368_common.h> - -#define KERNEL_LOAD_ADDR 0x280000 -#define DTB_LOAD_ADDR 0x5600000 -#define INITRD_LOAD_ADDR 0x5bf0000 -/* PHY needs longer aneg time at 1G */ - -#endif |