diff options
165 files changed, 507 insertions, 496 deletions
diff --git a/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c b/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c index 02a095ef8d..73dfb3d52b 100644 --- a/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c +++ b/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c @@ -156,7 +156,7 @@ int do_vcimage (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( vcimage, 2, 0, do_vcimage, "loads an image to Display", - "vcimage addr\n" + "vcimage addr" ); /* EOF EB+MCF-EV123c */ diff --git a/board/ads5121/ads5121_diu.c b/board/ads5121/ads5121_diu.c index 41a135314f..1dd60afa4f 100644 --- a/board/ads5121/ads5121_diu.c +++ b/board/ads5121/ads5121_diu.c @@ -131,7 +131,7 @@ U_BOOT_CMD( diufb, CONFIG_SYS_MAXARGS, 1, ads5121diu_init_show_bmp, "Init or Display BMP file", "init\n - initialize DIU\n" - "addr\n - display bmp at address 'addr'\n" + "addr\n - display bmp at address 'addr'" ); diff --git a/board/amcc/acadia/cmd_acadia.c b/board/amcc/acadia/cmd_acadia.c index d47cf1af57..c427f9ebc6 100644 --- a/board/amcc/acadia/cmd_acadia.c +++ b/board/amcc/acadia/cmd_acadia.c @@ -97,5 +97,5 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( bootstrap, 3, 0, do_bootstrap, "program the I2C bootstrap EEPROM", - "<cpu-freq> <nor|nand> - program the I2C bootstrap EEPROM\n" - ); + "<cpu-freq> <nor|nand> - program the I2C bootstrap EEPROM" +); diff --git a/board/amcc/canyonlands/bootstrap.c b/board/amcc/canyonlands/bootstrap.c index 30046fee3a..6dc2ccae96 100644 --- a/board/amcc/canyonlands/bootstrap.c +++ b/board/amcc/canyonlands/bootstrap.c @@ -191,5 +191,5 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( bootstrap, 2, 0, do_bootstrap, "program the I2C bootstrap EEPROM", - "<nand|nor> - strap to boot from NAND or NOR flash\n" - ); + "<nand|nor> - strap to boot from NAND or NOR flash" +); diff --git a/board/amcc/katmai/cmd_katmai.c b/board/amcc/katmai/cmd_katmai.c index 2c2849b015..335d30c368 100644 --- a/board/amcc/katmai/cmd_katmai.c +++ b/board/amcc/katmai/cmd_katmai.c @@ -214,5 +214,5 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( bootstrap, 3, 1, do_bootstrap, "program the serial device strap", - "wrclk [prom0|prom1] - program the serial device strap\n" - ); + "wrclk [prom0|prom1] - program the serial device strap" +); diff --git a/board/amcc/kilauea/cmd_pll.c b/board/amcc/kilauea/cmd_pll.c index 6b38493e59..9bae67e563 100644 --- a/board/amcc/kilauea/cmd_pll.c +++ b/board/amcc/kilauea/cmd_pll.c @@ -291,7 +291,7 @@ U_BOOT_CMD( RCONF: Read current eeprom configuration. \n\ -----------------------------------------------\n\ WTEST: Test EEPROM write with predefined values\n\ - -----------------------------------------------\n" - ); + -----------------------------------------------" +); #endif /* CONFIG_CMD_EEPROM */ diff --git a/board/amcc/luan/luan.c b/board/amcc/luan/luan.c index d2a3b9ec3d..7d02d904e0 100644 --- a/board/amcc/luan/luan.c +++ b/board/amcc/luan/luan.c @@ -331,5 +331,5 @@ U_BOOT_CMD( l2cache, 2, 1, do_l2cache, "enable or disable L2 cache", "[on, off]\n" - " - enable or disable L2 cache\n" - ); + " - enable or disable L2 cache" +); diff --git a/board/amcc/makalu/cmd_pll.c b/board/amcc/makalu/cmd_pll.c index 6b38493e59..9bae67e563 100644 --- a/board/amcc/makalu/cmd_pll.c +++ b/board/amcc/makalu/cmd_pll.c @@ -291,7 +291,7 @@ U_BOOT_CMD( RCONF: Read current eeprom configuration. \n\ -----------------------------------------------\n\ WTEST: Test EEPROM write with predefined values\n\ - -----------------------------------------------\n" - ); + -----------------------------------------------" +); #endif /* CONFIG_CMD_EEPROM */ diff --git a/board/amcc/sequoia/cmd_sequoia.c b/board/amcc/sequoia/cmd_sequoia.c index 6dfd8ba381..01dd97c84d 100644 --- a/board/amcc/sequoia/cmd_sequoia.c +++ b/board/amcc/sequoia/cmd_sequoia.c @@ -227,5 +227,5 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( bootstrap, 2, 0, do_bootstrap, "program the I2C bootstrap EEPROM", - "<nand|nor> - strap to boot from NAND or NOR flash\n" - ); + "<nand|nor> - strap to boot from NAND or NOR flash" +); diff --git a/board/amcc/taihu/lcd.c b/board/amcc/taihu/lcd.c index 6b68f33563..c3dc9837b5 100644 --- a/board/amcc/taihu/lcd.c +++ b/board/amcc/taihu/lcd.c @@ -233,25 +233,25 @@ static int do_lcd_cur (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( lcd_cls, 1, 1, do_lcd_clear, "lcd clear display", - NULL - ); + "" +); U_BOOT_CMD( lcd_puts, 2, 1, do_lcd_puts, "display string on lcd", - "<string> - <string> to be displayed\n" - ); + "<string> - <string> to be displayed" +); U_BOOT_CMD( lcd_putc, 2, 1, do_lcd_putc, "display char on lcd", - "<char> - <char> to be displayed\n" - ); + "<char> - <char> to be displayed" +); U_BOOT_CMD( lcd_cur, 3, 1, do_lcd_cur, "shift cursor on lcd", "<count> <dir> - shift cursor on lcd <count> times, direction is <dir> \n" " <count> - 0..31\n" - " <dir> - 0=backward 1=forward\n" - ); + " <dir> - 0=backward 1=forward" +); diff --git a/board/amcc/taihu/taihu.c b/board/amcc/taihu/taihu.c index 669429b67f..d8806ac32d 100644 --- a/board/amcc/taihu/taihu.c +++ b/board/amcc/taihu/taihu.c @@ -94,8 +94,8 @@ static int do_sw_stat(cmd_tbl_t* cmd_tp, int flags, int argc, char *argv[]) U_BOOT_CMD ( sw2_stat, 1, 1, do_sw_stat, "show status of switch 2", - NULL - ); + "" +); static int do_led_ctl(cmd_tbl_t* cmd_tp, int flags, int argc, char *argv[]) { @@ -134,8 +134,8 @@ U_BOOT_CMD ( led_ctl, 3, 1, do_led_ctl, "make led 1 or 2 on or off", "<led_no> <on/off> - make led <led_no> on/off,\n" - "\tled_no is 1 or 2\t" - ); + "\tled_no is 1 or 2" +); #define SPI_CS_GPIO0 0 #define SPI_SCLK_GPIO14 14 diff --git a/board/amcc/taihu/update.c b/board/amcc/taihu/update.c index 8e969056cc..f9c31b3927 100644 --- a/board/amcc/taihu/update.c +++ b/board/amcc/taihu/update.c @@ -128,5 +128,5 @@ static int update_boot_eeprom(cmd_tbl_t* cmdtp, int flag, int argc, char *argv[] U_BOOT_CMD ( update_boot_eeprom, 1, 1, update_boot_eeprom, "update boot eeprom content", - NULL - ); + "" +); diff --git a/board/amcc/taishan/lcd.c b/board/amcc/taishan/lcd.c index e4d070570a..d432cc3d05 100644 --- a/board/amcc/taishan/lcd.c +++ b/board/amcc/taishan/lcd.c @@ -254,18 +254,18 @@ static int do_lcd_cur(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) return 0; } -U_BOOT_CMD(lcd_test, 1, 1, do_lcd_test, "lcd test display", NULL); -U_BOOT_CMD(lcd_cls, 1, 1, do_lcd_clear, "lcd clear display", NULL); +U_BOOT_CMD(lcd_test, 1, 1, do_lcd_test, "lcd test display", ""); +U_BOOT_CMD(lcd_cls, 1, 1, do_lcd_clear, "lcd clear display", ""); U_BOOT_CMD(lcd_puts, 2, 1, do_lcd_puts, "display string on lcd", - "<string> - <string> to be displayed\n"); + "<string> - <string> to be displayed"); U_BOOT_CMD(lcd_putc, 2, 1, do_lcd_putc, "display char on lcd", - "<char> - <char> to be displayed\n"); + "<char> - <char> to be displayed"); U_BOOT_CMD(lcd_cur, 3, 1, do_lcd_cur, "shift cursor on lcd", "<count> <dir>- shift cursor on lcd <count> times, direction is <dir> \n" - " <count> - 0~31\n" " <dir> - 0,backward; 1, forward\n"); + " <count> - 0~31\n" " <dir> - 0,backward; 1, forward"); #if 0 /* test-only */ void set_phy_loopback_mode(void) @@ -373,8 +373,8 @@ static int do_led_test_on(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(ledon, 1, 1, do_led_test_on, - "led test light on", NULL); + "led test light on", ""); U_BOOT_CMD(ledoff, 1, 1, do_led_test_off, - "led test light off", NULL); + "led test light off", ""); #endif diff --git a/board/amcc/taishan/showinfo.c b/board/amcc/taishan/showinfo.c index b471c956e4..2a78a22e65 100644 --- a/board/amcc/taishan/showinfo.c +++ b/board/amcc/taishan/showinfo.c @@ -168,7 +168,7 @@ int do_show_xbridge_info(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(xbriinfo, 1, 1, do_show_xbridge_info, - "Show PCIX bridge info", NULL); + "Show PCIX bridge info", ""); #define TAISHAN_PCI_DEV_ID0 0x800 #define TAISHAN_PCI_DEV_ID1 0x1000 @@ -222,7 +222,7 @@ int do_show_pcix_device_info(cmd_tbl_t * cmdtp, int flag, int argc, } U_BOOT_CMD(xdevinfo, 1, 1, do_show_pcix_device_info, - "Show PCIX Device info", NULL); + "Show PCIX Device info", ""); extern void show_reset_reg(void); @@ -233,4 +233,4 @@ int do_show_reset_reg_info(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(resetinfo, 1, 1, do_show_reset_reg_info, - "Show Reset REG info", NULL); + "Show Reset REG info", ""); diff --git a/board/amcc/taishan/update.c b/board/amcc/taishan/update.c index 63f874488e..aab3a6577c 100644 --- a/board/amcc/taishan/update.c +++ b/board/amcc/taishan/update.c @@ -74,5 +74,5 @@ int do_update_boot_eeprom(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(update_boot_eeprom, 1, 1, do_update_boot_eeprom, - "update bootstrap eeprom content", NULL); + "update bootstrap eeprom content", ""); #endif diff --git a/board/amcc/yucca/cmd_yucca.c b/board/amcc/yucca/cmd_yucca.c index d2ca2572d7..ed6daa3899 100644 --- a/board/amcc/yucca/cmd_yucca.c +++ b/board/amcc/yucca/cmd_yucca.c @@ -282,5 +282,5 @@ static int setBootStrapClock(cmd_tbl_t *cmdtp, int incrflag, int flag, U_BOOT_CMD( evb440spe, 3, 1, do_evb440spe, "program the serial device strap", - "wrclk [prom0|prom1] - program the serial device strap\n" + "wrclk [prom0|prom1] - program the serial device strap" ); diff --git a/board/amirix/ap1000/ap1000.c b/board/amirix/ap1000/ap1000.c index fcf26984ff..cadfe0b5bc 100644 --- a/board/amirix/ap1000/ap1000.c +++ b/board/amirix/ap1000/ap1000.c @@ -670,14 +670,14 @@ U_BOOT_CMD (temp, 6, 0, do_temp_sensor, " - Set config options.\n" "\n" "All values can be decimal or hex (hex preceded with 0x).\n" - "Only whole numbers are supported for external limits.\n"); + "Only whole numbers are supported for external limits."); #if 0 U_BOOT_CMD (loadace, 2, 0, do_loadace, "load fpga configuration from System ACE compact flash", "N\n" " - Load configuration N (0-7) from System ACE compact flash\n" - "loadace\n" " - loads default configuration\n"); + "loadace\n" " - loads default configuration"); #endif U_BOOT_CMD (swconfig, 2, 0, do_swconfigbyte, @@ -685,19 +685,19 @@ U_BOOT_CMD (swconfig, 2, 0, do_swconfigbyte, "N [ADDRESS]\n" " - set software configuration byte to N, optionally use ADDRESS as\n" " location of buffer for flash copy\n" - "swconfig\n" " - display software configuration byte\n"); + "swconfig\n" " - display software configuration byte"); U_BOOT_CMD (pause, 2, 0, do_pause, "sleep processor until any key is pressed with poll time of N seconds", "N\n" " - sleep processor until any key is pressed with poll time of N seconds\n" "pause\n" - " - sleep processor until any key is pressed with poll time of 1 second\n"); + " - sleep processor until any key is pressed with poll time of 1 second"); U_BOOT_CMD (swrecon, 1, 0, do_swreconfig, "trigger a board reconfigure to the software selected configuration", "\n" - " - trigger a board reconfigure to the software selected configuration\n"); + " - trigger a board reconfigure to the software selected configuration"); int board_eth_init(bd_t *bis) { diff --git a/board/amirix/ap1000/powerspan.c b/board/amirix/ap1000/powerspan.c index f727061df7..28e2bbc478 100644 --- a/board/amirix/ap1000/powerspan.c +++ b/board/amirix/ap1000/powerspan.c @@ -487,7 +487,7 @@ U_BOOT_CMD (eeprom, 4, 0, do_eeprom, " - store contents of eeprom at address ADD\n" "eeprom p ADD\n" " - put data stored at address ADD into the eeprom\n" - "eeprom d\n" " - return eeprom to default contents\n"); + "eeprom d\n" " - return eeprom to default contents"); unsigned int PowerSpanRead (unsigned int theOffset) { diff --git a/board/barco/barco.c b/board/barco/barco.c index a19e1edabb..d7a00782b8 100644 --- a/board/barco/barco.c +++ b/board/barco/barco.c @@ -307,19 +307,19 @@ int barcobcd_boot_image (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD ( try_working, 1, 1, barcobcd_boot_image, "check flash value and boot the appropriate image", - "\n" + "" ); U_BOOT_CMD ( boot_working, 1, 1, barcobcd_boot_image, "check flash value and boot the appropriate image", - "\n" + "" ); U_BOOT_CMD ( boot_default, 1, 1, barcobcd_boot_image, "check flash value and boot the appropriate image", - "\n" + "" ); /* * We are not using serial communication, so just provide empty functions diff --git a/board/bc3450/cmd_bc3450.c b/board/bc3450/cmd_bc3450.c index aa46e5812f..271ffb1d1f 100644 --- a/board/bc3450/cmd_bc3450.c +++ b/board/bc3450/cmd_bc3450.c @@ -198,7 +198,7 @@ U_BOOT_CMD (dip, 1, 1, cmd_dip, "\n" " - prints the state of the dip switch and/or\n" " external configuration inputs as hex value.\n" - " - \"Config 1\" is the LSB\n"); + " - \"Config 1\" is the LSB"); /* @@ -229,7 +229,7 @@ static int cmd_buz (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD (buz, 2, 1, cmd_buz, "turns buzzer on/off", - "\n" "buz <on/off>\n" " - turns the buzzer on or off\n"); + "\n" "buz <on/off>\n" " - turns the buzzer on or off"); #endif /* CONFIG_BC3450_BUZZER */ @@ -326,14 +326,14 @@ U_BOOT_CMD (fp, 3, 1, cmd_fp, "\n" "fp bl <on/off>\n" " - turns the CCFL backlight of the display on/off\n" - "fp <on/off>\n" " - turns the whole display on/off\n" + "fp <on/off>\n" " - turns the whole display on/off" #ifdef CONFIG_BC3450_CRT + "\n" "fp crt <on/off>\n" - " - enables/disables the crt output (debug only)\n" + " - enables/disables the crt output (debug only)" #endif /* CONFIG_BC3450_CRT */ ); - /* * temp - DS1620 thermometer */ @@ -524,7 +524,7 @@ static int cmd_temp (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD (temp, 3, 1, cmd_temp, "print current temperature", - "\n" "temp\n" " - print current temperature\n"); + "\n" "temp\n" " - print current temperature"); #ifdef CONFIG_BC3450_CAN /* @@ -818,10 +818,11 @@ int cmd_test (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD (test, 2, 1, cmd_test, "unit test routines", "\n" #ifdef CONFIG_BC3450_CAN - "test can\n" - " - connect CAN1 (X8) with CAN2 (X9) for this test\n" + "test can\n" + " - connect CAN1 (X8) with CAN2 (X9) for this test\n" #endif /* CONFIG_BC3450_CAN */ - "test unit-off\n" - " - turns off the BC3450 unit\n" - " WARNING: Unsaved environment variables will be lost!\n"); + "test unit-off\n" + " - turns off the BC3450 unit\n" + " WARNING: Unsaved environment variables will be lost!" +); #endif diff --git a/board/bf537-stamp/cmd_bf537led.c b/board/bf537-stamp/cmd_bf537led.c index e77bb0cb19..e65c4f8359 100644 --- a/board/bf537-stamp/cmd_bf537led.c +++ b/board/bf537-stamp/cmd_bf537led.c @@ -33,7 +33,7 @@ "led <number> <action>\n" \ " <number> - Index (0-5) of LED to change, or \"all\"\n" \ " <action> - Must be one of:\n" \ - " on off toggle\n" + " on off toggle" /* Number of LEDs supported by the board */ #define NUMBER_LEDS 6 @@ -191,7 +191,7 @@ void set_led_state(int index, int state) /* Display usage information */ void show_cmd_usage() { - printf("Usage:\n%s", USAGE_LONG); + printf("Usage:\n%s\n", USAGE_LONG); } /* Register information for u-boot to find this command */ diff --git a/board/cm5200/cmd_cm5200.c b/board/cm5200/cmd_cm5200.c index f009eede27..cd98ae219f 100644 --- a/board/cm5200/cmd_cm5200.c +++ b/board/cm5200/cmd_cm5200.c @@ -443,6 +443,6 @@ U_BOOT_CMD( "fkt rs232 number\n" " - Test RS232 (loopback plug(s) for RS232 required)\n" "fkt usb\n" - " - Test USB communication\n" + " - Test USB communication" ); #endif /* CONFIG_CMD_BSP */ diff --git a/board/delta/delta.c b/board/delta/delta.c index 73e6c3e374..84ff47e53c 100644 --- a/board/delta/delta.c +++ b/board/delta/delta.c @@ -260,7 +260,7 @@ int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( kbd, 1, 1, do_kbd, "read keyboard status", - NULL + "" ); #endif /* DELTA_CHECK_KEYBD */ diff --git a/board/esd/ar405/ar405.c b/board/esd/ar405/ar405.c index 14520e11a6..9d1b6d2644 100644 --- a/board/esd/ar405/ar405.c +++ b/board/esd/ar405/ar405.c @@ -247,9 +247,8 @@ int do_digtest(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( digtest, 3, 1, do_digtest, "Test digital in-/output", - NULL - ); - + "" +); #define ERROR_DELTA 256 @@ -341,8 +340,8 @@ int do_anatest(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( anatest, 2, 1, do_anatest, "Test analog in-/output", - NULL - ); + "" +); int counter = 0; @@ -408,6 +407,6 @@ int do_inctest(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( inctest, 3, 1, do_inctest, "Test incremental encoder inputs", - NULL - ); + "" +); #endif diff --git a/board/esd/cms700/cms700.c b/board/esd/cms700/cms700.c index 658a26796a..01b12232b1 100644 --- a/board/esd/cms700/cms700.c +++ b/board/esd/cms700/cms700.c @@ -189,8 +189,9 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(eepwren, 2, 0, do_eep_wren, - "Enable / disable / query EEPROM write access", - NULL); + "Enable / disable / query EEPROM write access", + "" +); #endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */ /* ------------------------------------------------------------------------- */ diff --git a/board/esd/common/auto_update.c b/board/esd/common/auto_update.c index 8593125ef1..33aeb46d26 100644 --- a/board/esd/common/auto_update.c +++ b/board/esd/common/auto_update.c @@ -551,6 +551,6 @@ int auto_update(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( autoupd, 1, 1, auto_update, "Automatically update images", - NULL + "" ); #endif /* CONFIG_AUTO_UPDATE */ diff --git a/board/esd/common/cmd_loadpci.c b/board/esd/common/cmd_loadpci.c index c779f793d8..47e946f116 100644 --- a/board/esd/common/cmd_loadpci.c +++ b/board/esd/common/cmd_loadpci.c @@ -124,7 +124,7 @@ int do_loadpci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( loadpci, 1, 1, do_loadpci, "Wait for pci bootcmd and boot it", - NULL - ); + "" +); #endif diff --git a/board/esd/common/lcd.c b/board/esd/common/lcd.c index 066df74bf3..5c50b4c8dc 100644 --- a/board/esd/common/lcd.c +++ b/board/esd/common/lcd.c @@ -373,5 +373,5 @@ int do_esdbmp(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( esdbmp, 2, 1, do_esdbmp, "display BMP image", - "<imageAddr> - display image\n" + "<imageAddr> - display image" ); diff --git a/board/esd/common/xilinx_jtag/micro.c b/board/esd/common/xilinx_jtag/micro.c index 37ac0cc4eb..414e82135c 100644 --- a/board/esd/common/xilinx_jtag/micro.c +++ b/board/esd/common/xilinx_jtag/micro.c @@ -1869,4 +1869,4 @@ U_BOOT_CMD( cpld, 2, 1, do_cpld, "program onboard CPLD", "<xsvf-addr>" - ); +); diff --git a/board/esd/cpci2dp/cpci2dp.c b/board/esd/cpci2dp/cpci2dp.c index aba240f172..cd57ed4598 100644 --- a/board/esd/cpci2dp/cpci2dp.c +++ b/board/esd/cpci2dp/cpci2dp.c @@ -183,6 +183,6 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( eepwren, 2, 0, do_eep_wren, "Enable / disable / query EEPROM write access", - NULL - ); + "" +); #endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */ diff --git a/board/esd/cpci405/cpci405.c b/board/esd/cpci405/cpci405.c index ccbe245d76..a677c623f7 100644 --- a/board/esd/cpci405/cpci405.c +++ b/board/esd/cpci405/cpci405.c @@ -690,8 +690,8 @@ int do_onewire(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( onewire, 1, 1, do_onewire, "Read 1-write ID", - NULL - ); + "" +); #define CONFIG_SYS_I2C_EEPROM_ADDR_2 0x51 /* EEPROM CAT24WC32 */ #define CONFIG_ENV_SIZE_2 0x800 /* 2048 bytes may be used for env vars */ @@ -751,8 +751,8 @@ int do_get_bpip(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( getbpip, 1, 1, do_get_bpip, "Update IP-Address with Backplane IP-Address", - NULL - ); + "" +); /* * Set and print backplane ip... @@ -787,7 +787,7 @@ int do_set_bpip(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( setbpip, 2, 1, do_set_bpip, "Write Backplane IP-Address", - NULL - ); + "" +); #endif /* CONFIG_CPCI405AB */ diff --git a/board/esd/cpci5200/cpci5200.c b/board/esd/cpci5200/cpci5200.c index b6b50fb46e..36fcf7f87d 100644 --- a/board/esd/cpci5200/cpci5200.c +++ b/board/esd/cpci5200/cpci5200.c @@ -295,4 +295,6 @@ int do_writepci(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD(writepci, 3, 1, do_writepci, "Write some data to pcibus", - "<addr> <size>\n" " - Write some data to pcibus.\n"); + "<addr> <size>\n" + "" +); diff --git a/board/esd/cpci750/cpci750.c b/board/esd/cpci750/cpci750.c index 482663398a..258d8b234b 100644 --- a/board/esd/cpci750/cpci750.c +++ b/board/esd/cpci750/cpci750.c @@ -994,5 +994,5 @@ int do_show_config(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( show_config, 1, 1, do_show_config, "Show Marvell strapping register", - "Show Marvell strapping register (ResetSampleLow ResetSampleHigh)\n" - ); + "Show Marvell strapping register (ResetSampleLow ResetSampleHigh)" +); diff --git a/board/esd/dasa_sim/cmd_dasa_sim.c b/board/esd/dasa_sim/cmd_dasa_sim.c index 0310c47cf1..675e5071d7 100644 --- a/board/esd/dasa_sim/cmd_dasa_sim.c +++ b/board/esd/dasa_sim/cmd_dasa_sim.c @@ -230,7 +230,7 @@ U_BOOT_CMD( pci9054, 3, 1, do_pci9054, "PLX PCI9054 EEPROM access", "pci9054 info - print EEPROM values\n" - "pci9054 update - updates EEPROM with default values\n" + "pci9054 update - updates EEPROM with default values" ); /* ------------------------------------------------------------------------- */ diff --git a/board/esd/du440/du440.c b/board/esd/du440/du440.c index 45dfa6fd77..0ec519b8db 100644 --- a/board/esd/du440/du440.c +++ b/board/esd/du440/du440.c @@ -607,8 +607,8 @@ int do_dcf77(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( dcf77, 1, 1, do_dcf77, "Check DCF77 receiver", - NULL - ); + "" +); /* * initialize USB hub via I2C1 @@ -657,8 +657,8 @@ int do_hubinit(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( hubinit, 1, 1, do_hubinit, "Initialize USB hub", - NULL - ); + "" +); #endif /* CONFIG_I2C_MULTI_BUS */ #define CONFIG_SYS_BOOT_EEPROM_PAGE_WRITE_BITS 3 @@ -790,8 +790,8 @@ int do_setup_boot_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( sbe, 2, 0, do_setup_boot_eeprom, "setup boot eeprom", - NULL - ); + "" +); #if defined(CONFIG_SYS_EEPROM_WREN) /* @@ -863,8 +863,9 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(eepwren, 2, 0, do_eep_wren, - "Enable / disable / query EEPROM write access", - NULL); + "Enable / disable / query EEPROM write access", + "" +); #endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */ static int got_pldirq; @@ -916,8 +917,8 @@ int do_waitpwrirq(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( wpi, 1, 1, do_waitpwrirq, "Wait for power change interrupt", - NULL - ); + "" +); /* * initialize DVI panellink transmitter @@ -961,8 +962,8 @@ int do_dviinit(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( dviinit, 1, 1, do_dviinit, "Initialize DVI Panellink transmitter", - NULL - ); + "" +); /* * TODO: 'time' command might be useful for others as well. @@ -1001,8 +1002,8 @@ int do_time(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( time, CONFIG_SYS_MAXARGS, 1, do_time, "run command and output execution time", - NULL - ); + "" +); extern void video_hw_rectfill ( unsigned int bpp, /* bytes per pixel */ @@ -1051,5 +1052,5 @@ int do_gfxdemo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( gfxdemo, CONFIG_SYS_MAXARGS, 1, do_gfxdemo, "demo", - NULL - ); + "" +); diff --git a/board/esd/hh405/hh405.c b/board/esd/hh405/hh405.c index eab952c566..5ae4c75861 100644 --- a/board/esd/hh405/hh405.c +++ b/board/esd/hh405/hh405.c @@ -769,8 +769,9 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(eepwren, 2, 0, do_eep_wren, - "Enable / disable / query EEPROM write access", - NULL); + "Enable / disable / query EEPROM write access", + "" +); #endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */ diff --git a/board/esd/ocrtc/cmd_ocrtc.c b/board/esd/ocrtc/cmd_ocrtc.c index db2c548421..5f3254d252 100644 --- a/board/esd/ocrtc/cmd_ocrtc.c +++ b/board/esd/ocrtc/cmd_ocrtc.c @@ -55,7 +55,7 @@ int do_setdevice(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( setdevice, 1, 1, do_setdevice, "Set device number on pci adapter boards", - NULL + "" ); @@ -78,7 +78,7 @@ int do_getdevice(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( getdevice, 1, 1, do_getdevice, "Get device number and set slot env variable", - NULL + "" ); #endif diff --git a/board/esd/pci405/cmd_pci405.c b/board/esd/pci405/cmd_pci405.c index a0d1f3f0d1..1d14611293 100644 --- a/board/esd/pci405/cmd_pci405.c +++ b/board/esd/pci405/cmd_pci405.c @@ -109,6 +109,6 @@ int do_loadpci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( loadpci, 1, 1, do_loadpci, "Wait for pci-image and boot it", - NULL + "" ); #endif diff --git a/board/esd/pci405/pci405.c b/board/esd/pci405/pci405.c index 8973f97095..56184caa8f 100644 --- a/board/esd/pci405/pci405.c +++ b/board/esd/pci405/pci405.c @@ -381,5 +381,5 @@ U_BOOT_CMD( "wpeeprom 1\n" " - enable I2C EEPROM write protection\n" "wpeeprom 0\n" - " - disable I2C EEPROM write protection\n" - ); + " - disable I2C EEPROM write protection" +); diff --git a/board/esd/pf5200/pf5200.c b/board/esd/pf5200/pf5200.c index f225f0e196..4e64e83bf6 100644 --- a/board/esd/pf5200/pf5200.c +++ b/board/esd/pf5200/pf5200.c @@ -294,7 +294,7 @@ int do_poweroff(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) return (0); } -U_BOOT_CMD(poweroff, 1, 1, do_poweroff, "Switch off power", NULL); +U_BOOT_CMD(poweroff, 1, 1, do_poweroff, "Switch off power", ""); int phypower(int flag) { @@ -338,7 +338,7 @@ int do_phypower(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(phypower, 2, 2, do_phypower, - "Switch power of ethernet phy", NULL); + "Switch power of ethernet phy", ""); int do_writepci(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) { @@ -369,5 +369,7 @@ int do_writepci(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(writepci, 3, 1, do_writepci, - "Write some data to pcibus", - "<addr> <size>\n" " - Write some data to pcibus.\n"); + "Write some data to pcibus", + "<addr> <size>\n" + "" +); diff --git a/board/esd/plu405/plu405.c b/board/esd/plu405/plu405.c index a94604a2f2..fdacbf6f6b 100644 --- a/board/esd/plu405/plu405.c +++ b/board/esd/plu405/plu405.c @@ -333,6 +333,7 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(eepwren, 2, 0, do_eep_wren, - "Enable / disable / query EEPROM write access", - NULL); + "Enable / disable / query EEPROM write access", + "" +); #endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */ diff --git a/board/esd/pmc440/cmd_pmc440.c b/board/esd/pmc440/cmd_pmc440.c index 0fbc3dc239..1af431bd7d 100644 --- a/board/esd/pmc440/cmd_pmc440.c +++ b/board/esd/pmc440/cmd_pmc440.c @@ -99,8 +99,8 @@ int do_waithci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( waithci, 1, 1, do_waithci, "Wait for host control interrupt", - NULL - ); + "" +); void dump_fifo(pmc440_fpga_t *fpga, int f, int *n) { @@ -266,8 +266,8 @@ U_BOOT_CMD( " - with 'wait' argument: interrupt driven read from all fifos\n" " - with 'read' argument: read current contents from all fifos\n" " - with 'write' argument: write 'data' 'cnt' times to " - "'fifo' or 'address'\n" - ); + "'fifo' or 'address'" +); int do_setup_bootstrap_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { @@ -338,7 +338,7 @@ U_BOOT_CMD( sbe, 4, 0, do_setup_bootstrap_eeprom, "setup bootstrap eeprom", "<cpufreq:400|533|667> [<console-uart:0|1> [<bringup delay (0..20s)>]]" - ); +); #if defined(CONFIG_PRAM) #include <environment.h> @@ -400,8 +400,8 @@ int do_painit(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( painit, 1, 1, do_painit, "prepare PciAccess system", - NULL - ); + "" +); #endif /* CONFIG_PRAM */ int do_selfreset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) @@ -412,8 +412,8 @@ int do_selfreset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( selfreset, 1, 1, do_selfreset, "assert self-reset# signal", - NULL - ); + "" +); int do_resetout(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { @@ -449,8 +449,8 @@ int do_resetout(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( resetout, 2, 1, do_resetout, "assert PMC-RESETOUT# signal", - NULL - ); + "" +); int do_inta(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { @@ -481,8 +481,8 @@ int do_inta(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( inta, 2, 1, do_inta, "Assert/Deassert or query INTA# state in non-monarch mode", - NULL - ); + "" +); /* test-only */ int do_pmm(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) @@ -514,8 +514,8 @@ int do_pmm(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( pmm, 2, 1, do_pmm, "Setup pmm[1] registers", - "<pciaddr> (pciaddr will be aligned to 256MB)\n" - ); + "<pciaddr> (pciaddr will be aligned to 256MB)" +); #if defined(CONFIG_SYS_EEPROM_WREN) int do_eep_wren(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) @@ -549,8 +549,9 @@ int do_eep_wren(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) return state; } U_BOOT_CMD(eepwren, 2, 0, do_eep_wren, - "Enable / disable / query EEPROM write access", - NULL); + "Enable / disable / query EEPROM write access", + "" +); #endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */ #endif /* CONFIG_CMD_BSP */ diff --git a/board/esd/tasreg/tasreg.c b/board/esd/tasreg/tasreg.c index 9602ee59fd..18444427fe 100644 --- a/board/esd/tasreg/tasreg.c +++ b/board/esd/tasreg/tasreg.c @@ -250,8 +250,8 @@ int do_iploop(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( iploop, 2, 1, do_iploop, "i2c probe loop <addr>", - NULL - ); + "" +); /* */ @@ -303,8 +303,8 @@ int do_codec(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( codec, 1, 1, do_codec, "Enable codec", - NULL - ); + "" +); /* */ @@ -336,8 +336,8 @@ int do_saa(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( saa, 5, 1, do_saa, "Write to SAA1064 <addr> <instr> <cntrl> <data>", - NULL - ); + "" +); /* */ @@ -375,8 +375,8 @@ int do_iwrite(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( iwrite, 6, 1, do_iwrite, "Write n bytes to I2C-device", - "addr cnt data0 ... datan\n" - ); + "addr cnt data0 ... datan" +); /* */ @@ -407,8 +407,8 @@ int do_iread(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( iread, 3, 1, do_iread, "Read from I2C <addr> <cnt>", - NULL - ); + "" +); /* */ @@ -445,6 +445,6 @@ int do_ireadl(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( ireadl, 2, 1, do_ireadl, "Read-loop from I2C <addr>", - NULL - ); + "" +); #endif diff --git a/board/esd/voh405/voh405.c b/board/esd/voh405/voh405.c index 96a04b3ff8..91275507e0 100644 --- a/board/esd/voh405/voh405.c +++ b/board/esd/voh405/voh405.c @@ -392,6 +392,7 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(eepwren, 2, 0, do_eep_wren, - "Enable / disable / query EEPROM write access", - NULL); + "Enable / disable / query EEPROM write access", + "" +); #endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */ diff --git a/board/evb64260/zuma_pbb.c b/board/evb64260/zuma_pbb.c index aef9c27e79..cab4fcae17 100644 --- a/board/evb64260/zuma_pbb.c +++ b/board/evb64260/zuma_pbb.c @@ -204,19 +204,17 @@ U_BOOT_CMD( zinit, 1, 0, do_zuma_init_pbb, "init zuma pbb", "\n" - " - init zuma pbb\n" ); U_BOOT_CMD( zdtest, 3, 1, do_zuma_test_dma, "run dma test", "[cmd [count]]\n" - " - run dma cmd (w=0,v=1,cp=2,cmp=3,wi=4,vi=5), count bytes\n" + " - run dma cmd (w=0,v=1,cp=2,cmp=3,wi=4,vi=5), count bytes" ); U_BOOT_CMD( zminit, 1, 0, do_zuma_init_mbox, "init zuma mbox", "\n" - " - init zuma mbox\n" ); #endif diff --git a/board/freescale/common/pixis.c b/board/freescale/common/pixis.c index eb76d937f8..4851f066e7 100644 --- a/board/freescale/common/pixis.c +++ b/board/freescale/common/pixis.c @@ -279,9 +279,10 @@ int pixis_disable_watchdog_cmd(cmd_tbl_t *cmdtp, } U_BOOT_CMD( - diswd, 1, 0, pixis_disable_watchdog_cmd, - "Disable watchdog timer", - NULL); + diswd, 1, 0, pixis_disable_watchdog_cmd, + "Disable watchdog timer", + "" +); #ifdef CONFIG_PIXIS_SGMII_CMD int pixis_set_sgmii(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) @@ -343,14 +344,15 @@ int pixis_set_sgmii(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD( - pixis_set_sgmii, CONFIG_SYS_MAXARGS, 1, pixis_set_sgmii, - "pixis_set_sgmii" - " - Enable or disable SGMII mode for a given TSEC \n", - "\npixis_set_sgmii [TSEC num] <on|off|switch>\n" - " TSEC num: 1,2,3,4 or 'all'. 'all' is default.\n" - " on - enables SGMII\n" - " off - disables SGMII\n" - " switch - use switch settings\n"); + pixis_set_sgmii, CONFIG_SYS_MAXARGS, 1, pixis_set_sgmii, + "pixis_set_sgmii" + " - Enable or disable SGMII mode for a given TSEC \n", + "\npixis_set_sgmii [TSEC num] <on|off|switch>\n" + " TSEC num: 1,2,3,4 or 'all'. 'all' is default.\n" + " on - enables SGMII\n" + " off - disables SGMII\n" + " switch - use switch settings" +); #endif /* @@ -544,5 +546,5 @@ U_BOOT_CMD( " pixis_reset [altbank]\n" " pixis_reset altbank wd\n" " pixis_reset altbank cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>\n" - " pixis_reset cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>\n" - ); + " pixis_reset cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>" +); diff --git a/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c b/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c index 2b2d5d7ec2..0ad878c293 100644 --- a/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c +++ b/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c @@ -140,8 +140,8 @@ U_BOOT_CMD( diufb, CONFIG_SYS_MAXARGS, 1, mpc8610diu_init_show_bmp, "Init or Display BMP file", "init\n - initialize DIU\n" - "addr\n - display bmp at address 'addr'\n" - ); + "addr\n - display bmp at address 'addr'" +); #if defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE) diff --git a/board/g2000/g2000.c b/board/g2000/g2000.c index b35038dc43..218f1bebf7 100644 --- a/board/g2000/g2000.c +++ b/board/g2000/g2000.c @@ -186,7 +186,7 @@ int do_dumpebc(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( dumpebc, 1, 1, do_dumpebc, "Dump all EBC registers", - NULL + "" ); @@ -208,7 +208,7 @@ int do_dumpdcr(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( dumpdcr, 1, 1, do_dumpdcr, "Dump all DCR registers", - NULL + "" ); @@ -272,6 +272,6 @@ int do_dumpspr(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( dumpspr, 1, 1, do_dumpspr, "Dump all SPR registers", - NULL + "" ); #endif diff --git a/board/hymod/bsp.c b/board/hymod/bsp.c index 092d368440..262070fdff 100644 --- a/board/hymod/bsp.c +++ b/board/hymod/bsp.c @@ -297,7 +297,7 @@ U_BOOT_CMD( "fpga info\n" " - print information about the Hymod FPGA, namely the\n" " memory addresses at which the four FPGA local bus\n" - " address spaces appear in the physical address space\n" + " address spaces appear in the physical address space" ); /* ------------------------------------------------------------------------- */ int @@ -340,7 +340,7 @@ U_BOOT_CMD( "[type]\n" " - write zeroes into the EEPROM on the board of type `type'\n" " (`type' is either `main' or `mezz' - default `main')\n" - " Note: the EEPROM write enable jumper must be installed\n" + " Note: the EEPROM write enable jumper must be installed" ); /* ------------------------------------------------------------------------- */ diff --git a/board/inka4x0/inkadiag.c b/board/inka4x0/inkadiag.c index 12c0a85d6e..3761ef66d4 100644 --- a/board/inka4x0/inkadiag.c +++ b/board/inka4x0/inkadiag.c @@ -439,14 +439,14 @@ static int do_inkadiag_help(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); cmd_tbl_t cmd_inkadiag_sub[] = { U_BOOT_CMD_MKENT(io, 1, 1, do_inkadiag_io, "read digital input", - "<drawer1|drawer2|other> [value] - get or set specified signal\n"), + "<drawer1|drawer2|other> [value] - get or set specified signal"), U_BOOT_CMD_MKENT(serial, 4, 1, do_inkadiag_serial, "test serial port", "<num> <mode> <baudrate> <msg> - test uart num [0..11] in mode\n" - "and baudrate with msg\n"), + "and baudrate with msg"), U_BOOT_CMD_MKENT(buzzer, 2, 1, do_inkadiag_buzzer, "activate buzzer", - "<period> <freq> - turn buzzer on for period ms with freq hz\n"), + "<period> <freq> - turn buzzer on for period ms with freq hz"), U_BOOT_CMD_MKENT(help, 4, 1, do_inkadiag_help, "get help", - "[command] - get help for command\n"), + "[command] - get help for command"), }; static int do_inkadiag_help(cmd_tbl_t *cmdtp, int flag, @@ -483,7 +483,7 @@ U_BOOT_CMD(inkadiag, 6, 1, do_inkadiag, "inkadiag - inka diagnosis\n", "[inkadiag what ...]\n" " - perform a diagnosis on inka hardware\n" - "'inkadiag' performs hardware tests.\n\n"); + "'inkadiag' performs hardware tests."); /* Relocate the command table function pointers when running in RAM */ int inkadiag_init_r (void) { diff --git a/board/keymile/common/keymile_hdlc_enet.c b/board/keymile/common/keymile_hdlc_enet.c index 57978800f6..2e913adc55 100644 --- a/board/keymile/common/keymile_hdlc_enet.c +++ b/board/keymile/common/keymile_hdlc_enet.c @@ -591,7 +591,7 @@ int hdlc_enet_stest(struct cmd_tbl_s *a, int b, int c, char **d) U_BOOT_CMD( stest, 1, 1, hdlc_enet_stest, "simple send test for hdlc_enet", - "no arguments\n" + "" ); /* simple receive test routine */ int hdlc_enet_rtest(struct cmd_tbl_s *a, int b, int c, char **d) @@ -613,7 +613,7 @@ int hdlc_enet_rtest(struct cmd_tbl_s *a, int b, int c, char **d) U_BOOT_CMD( rtest, 1, 1, hdlc_enet_rtest, "simple receive test for hdlc_enet", - "no arguments\n" + "" ); #endif diff --git a/board/lwmon/lwmon.c b/board/lwmon/lwmon.c index 1b665a9188..75b32090d1 100644 --- a/board/lwmon/lwmon.c +++ b/board/lwmon/lwmon.c @@ -853,7 +853,7 @@ U_BOOT_CMD( pic, 4, 1, do_pic, "read and write PIC registers", "read reg - read PIC register `reg'\n" - "pic write reg val - write value `val' to PIC register `reg'\n" + "pic write reg val - write value `val' to PIC register `reg'" ); /*********************************************************************** @@ -911,7 +911,7 @@ int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( kbd, 1, 1, do_kbd, "read keyboard status", - NULL + "" ); /* Read and set LSB switch */ @@ -985,7 +985,7 @@ U_BOOT_CMD( "check and set LSB switch", "on - switch LSB on\n" "lsb off - switch LSB off\n" - "lsb - print current setting\n" + "lsb - print current setting" ); #endif diff --git a/board/lwmon5/kbd.c b/board/lwmon5/kbd.c index bafd39c62a..be1a1dfeb5 100644 --- a/board/lwmon5/kbd.c +++ b/board/lwmon5/kbd.c @@ -433,7 +433,7 @@ int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( kbd, 1, 1, do_kbd, "read keyboard status", - NULL + "" ); /*----------------------------- Utilities -----------------------------*/ diff --git a/board/lwmon5/lwmon5.c b/board/lwmon5/lwmon5.c index 4c04b98419..9b76e7663c 100644 --- a/board/lwmon5/lwmon5.c +++ b/board/lwmon5/lwmon5.c @@ -487,7 +487,7 @@ int do_eeprom_wp(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( eepromwp, 2, 0, do_eeprom_wp, "eeprom write protect off/on", - "<on|off> - enable (on) or disable (off) I2C EEPROM write protect\n" + "<on|off> - enable (on) or disable (off) I2C EEPROM write protect" ); #if defined(CONFIG_VIDEO) diff --git a/board/micronas/vct/smc_eeprom.c b/board/micronas/vct/smc_eeprom.c index 2bc7ad4c4b..6587f13e2f 100644 --- a/board/micronas/vct/smc_eeprom.c +++ b/board/micronas/vct/smc_eeprom.c @@ -384,11 +384,11 @@ static int do_eeprom_save_mac(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[] } U_BOOT_CMD(smcee, 1, 0, do_eeprom_erase_all, - "smcee - Erase content of SMC EEPROM\n",); + "smcee - Erase content of SMC EEPROM",); U_BOOT_CMD(smced, 1, 0, do_eeprom_dump, - "smced - Dump content of SMC EEPROM\n",); + "smced - Dump content of SMC EEPROM",); U_BOOT_CMD(smcew, 2, 0, do_eeprom_save_mac, "smcew - Write MAC address to SMC EEPROM\n", - "aa:bb:cc:dd:ee:ff new mac address\n"); + "aa:bb:cc:dd:ee:ff new mac address"); diff --git a/board/mpl/mip405/cmd_mip405.c b/board/mpl/mip405/cmd_mip405.c index dc1380445a..cd93a7ca0b 100644 --- a/board/mpl/mip405/cmd_mip405.c +++ b/board/mpl/mip405/cmd_mip405.c @@ -60,7 +60,7 @@ U_BOOT_CMD( "mip405 flash mps - updates U-Boot with image from MPS\n" "mip405 info - displays board information\n" "mip405 led <on> - switches LED on (on=1) or off (on=0)\n" - "mip405 mem [cnt] - Memory Test <cnt>-times, <cnt> = -1 loop forever\n" + "mip405 mem [cnt] - Memory Test <cnt>-times, <cnt> = -1 loop forever" ); /* ------------------------------------------------------------------------- */ diff --git a/board/mpl/pati/cmd_pati.c b/board/mpl/pati/cmd_pati.c index 95bfdcc8c8..0682323ae1 100644 --- a/board/mpl/pati/cmd_pati.c +++ b/board/mpl/pati/cmd_pati.c @@ -443,7 +443,7 @@ U_BOOT_CMD( " era - erase PCI EEPROM (write all word to 0xffff)\n" " reload- Reload PCI Bridge with EEPROM Values\n" " NOTE: <addr> must start on word boundary\n" - " <offset> and <size> must be even byte values\n" + " <offset> and <size> must be even byte values" ); /* ------------------------------------------------------------------------- */ diff --git a/board/mpl/pip405/cmd_pip405.c b/board/mpl/pip405/cmd_pip405.c index ad5e0a1e18..6bbae89e5d 100644 --- a/board/mpl/pip405/cmd_pip405.c +++ b/board/mpl/pip405/cmd_pip405.c @@ -63,7 +63,7 @@ U_BOOT_CMD( "PIP405 specific Cmds", "flash mem [SrcAddr] - updates U-Boot with image in memory\n" "pip405 flash floppy [SrcAddr] - updates U-Boot with image from floppy\n" - "pip405 flash mps - updates U-Boot with image from MPS\n" + "pip405 flash mps - updates U-Boot with image from MPS" ); /* ------------------------------------------------------------------------- */ diff --git a/board/mpl/vcma9/cmd_vcma9.c b/board/mpl/vcma9/cmd_vcma9.c index cbe7fe256e..0160774395 100644 --- a/board/mpl/vcma9/cmd_vcma9.c +++ b/board/mpl/vcma9/cmd_vcma9.c @@ -174,5 +174,5 @@ int do_vcma9(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( vcma9, 6, 1, do_vcma9, "VCMA9 specific commands", - "flash mem [SrcAddr]\n - updates U-Boot with image in memory\n" + "flash mem [SrcAddr]\n - updates U-Boot with image in memory" ); diff --git a/board/pcippc2/pcippc2.c b/board/pcippc2/pcippc2.c index 80c2cb58e2..7985f7d711 100644 --- a/board/pcippc2/pcippc2.c +++ b/board/pcippc2/pcippc2.c @@ -239,7 +239,7 @@ U_BOOT_CMD( "check and set watchdog", "on - switch watchDog on\n" "wd off - switch watchdog off\n" - "wd - print current status\n" + "wd - print current status" ); #endif diff --git a/board/pcs440ep/pcs440ep.c b/board/pcs440ep/pcs440ep.c index 9cc3f5b640..47d6391469 100644 --- a/board/pcs440ep/pcs440ep.c +++ b/board/pcs440ep/pcs440ep.c @@ -763,7 +763,7 @@ U_BOOT_CMD( " 0x02 = DIAG 2 on\n" " 0x04 = DIAG 3 on\n" " 0x08 = DIAG 4 on\n" - " > 0x100 set the LED, who are on, to state blinking\n" + " > 0x100 set the LED, who are on, to state blinking" ); #if defined(CONFIG_SHA1_CHECK_UB_IMG) @@ -823,7 +823,7 @@ U_BOOT_CMD( "calculate the SHA1 Sum", "address len [addr] calculate the SHA1 sum [save at addr]\n" " -p calculate the SHA1 sum from the U-Boot image in flash and print\n" - " -c check the U-Boot image in flash\n" + " -c check the U-Boot image in flash" ); #endif diff --git a/board/pn62/cmd_pn62.c b/board/pn62/cmd_pn62.c index ff5d63ee12..a989351722 100644 --- a/board/pn62/cmd_pn62.c +++ b/board/pn62/cmd_pn62.c @@ -54,8 +54,8 @@ int do_led (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( led , 3, 1, do_led, "set LED 0..11 on the PN62 board", - "i fun\n" - " - set 'i'th LED to function 'fun'\n" + "i fun" + " - set 'i'th LED to function 'fun'" ); /* @@ -177,7 +177,7 @@ U_BOOT_CMD( loadpci, 2, 1, do_loadpci, "load binary file over PCI", "[addr]\n" - " - load binary file over PCI to address 'addr'\n" + " - load binary file over PCI to address 'addr'" ); #endif diff --git a/board/prodrive/pdnb3/pdnb3.c b/board/prodrive/pdnb3/pdnb3.c index 877728403f..c323456d60 100644 --- a/board/prodrive/pdnb3/pdnb3.c +++ b/board/prodrive/pdnb3/pdnb3.c @@ -228,7 +228,7 @@ int do_fpga(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( fpga, 2, 0, do_fpga, "boot FPGA", - "address size\n - boot FPGA with gzipped image at <address>\n" + "address size\n - boot FPGA with gzipped image at <address>" ); #if defined(CONFIG_CMD_PCI) || defined(CONFIG_PCI) diff --git a/board/pxa255_idp/pxa_idp.c b/board/pxa255_idp/pxa_idp.c index aa598aaa44..e9e479c4ba 100644 --- a/board/pxa255_idp/pxa_idp.c +++ b/board/pxa255_idp/pxa_idp.c @@ -129,7 +129,7 @@ int do_idpcmd(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD(idpcmd, CONFIG_SYS_MAXARGS, 0, do_idpcmd, "custom IDP command", - "no args at this time\n" + "no args at this time" ); #endif diff --git a/board/r360mpi/r360mpi.c b/board/r360mpi/r360mpi.c index 1871984a69..703af73aad 100644 --- a/board/r360mpi/r360mpi.c +++ b/board/r360mpi/r360mpi.c @@ -415,5 +415,5 @@ int do_kbd (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( kbd, 1, 1, do_kbd, "read keyboard status", - NULL + "" ); diff --git a/board/renesas/sh7785lcr/rtl8169_mac.c b/board/renesas/sh7785lcr/rtl8169_mac.c index 6d0bbc0c2f..634efb42a8 100644 --- a/board/renesas/sh7785lcr/rtl8169_mac.c +++ b/board/renesas/sh7785lcr/rtl8169_mac.c @@ -325,7 +325,7 @@ U_BOOT_CMD( setmac, 2, 1, do_set_mac, "write MAC address for RTL8110SCL", "\n" - "setmac <mac address> - write MAC address for RTL8110SCL\n" + "setmac <mac address> - write MAC address for RTL8110SCL" ); int do_print_mac(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) @@ -344,5 +344,5 @@ U_BOOT_CMD( printmac, 1, 1, do_print_mac, "print MAC address for RTL8110", "\n" - " - print MAC address for RTL8110\n" + " - print MAC address for RTL8110" ); diff --git a/board/renesas/sh7785lcr/selfcheck.c b/board/renesas/sh7785lcr/selfcheck.c index 6dbb7842e4..e803b3c9c1 100644 --- a/board/renesas/sh7785lcr/selfcheck.c +++ b/board/renesas/sh7785lcr/selfcheck.c @@ -168,5 +168,5 @@ U_BOOT_CMD( "hwtest sm107 - output SM107 version\n" "hwtest net - check RTL8110 ID\n" "hwtest sata - check SiI3512 ID\n" - "hwtest pci - output PCI slot device ID\n" + "hwtest pci - output PCI slot device ID" ); diff --git a/board/renesas/sh7785lcr/sh7785lcr.c b/board/renesas/sh7785lcr/sh7785lcr.c index 6bdf3c067a..9948d04eae 100644 --- a/board/renesas/sh7785lcr/sh7785lcr.c +++ b/board/renesas/sh7785lcr/sh7785lcr.c @@ -82,6 +82,6 @@ U_BOOT_CMD( pmb, 1, 1, do_pmb, "pmb - PMB setting\n", "\n" - " - PMB setting for all SDRAM mapping\n" + " - PMB setting for all SDRAM mapping" ); #endif diff --git a/board/sandburst/common/ppc440gx_i2c.c b/board/sandburst/common/ppc440gx_i2c.c index c1af70ceab..bc88e5a7eb 100644 --- a/board/sandburst/common/ppc440gx_i2c.c +++ b/board/sandburst/common/ppc440gx_i2c.c @@ -501,7 +501,7 @@ int do_i2c1_probe(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( iprobe1, 1, 1, do_i2c1_probe, "probe to discover valid I2C chip addresses", - "\n -discover valid I2C chip addresses\n" + "" ); #endif /* CONFIG_I2C_BUS1 */ diff --git a/board/sandburst/karef/karef.c b/board/sandburst/karef/karef.c index b8ae68fcd6..92f5247565 100644 --- a/board/sandburst/karef/karef.c +++ b/board/sandburst/karef/karef.c @@ -611,7 +611,7 @@ int karefRecover(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(kasetup, 1, 1, karefSetupVars, - "Set environment to factory defaults", NULL); + "Set environment to factory defaults", ""); U_BOOT_CMD(karecover, 1, 1, karefRecover, - "Set environment to allow for fs recovery", NULL); + "Set environment to allow for fs recovery", ""); diff --git a/board/sandburst/metrobox/metrobox.c b/board/sandburst/metrobox/metrobox.c index fc136c89c4..27d7f74088 100644 --- a/board/sandburst/metrobox/metrobox.c +++ b/board/sandburst/metrobox/metrobox.c @@ -577,7 +577,7 @@ int metroboxRecover(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(mbsetup, 1, 1, metroboxSetupVars, - "Set environment to factory defaults", NULL); + "Set environment to factory defaults", ""); U_BOOT_CMD(mbrecover, 1, 1, metroboxRecover, - "Set environment to allow for fs recovery", NULL); + "Set environment to allow for fs recovery", ""); diff --git a/board/siemens/common/fpga.c b/board/siemens/common/fpga.c index c9a93e1589..4b45902aa2 100644 --- a/board/siemens/common/fpga.c +++ b/board/siemens/common/fpga.c @@ -295,7 +295,7 @@ U_BOOT_CMD( "access FPGA(s)", "fpga status [name] - print FPGA status\n" "fpga reset [name] - reset FPGA\n" - "fpga load [name] addr - load FPGA configuration data\n" + "fpga load [name] addr - load FPGA configuration data" ); #endif diff --git a/board/siemens/pcu_e/pcu_e.c b/board/siemens/pcu_e/pcu_e.c index f87d6bc00f..827578c3a9 100644 --- a/board/siemens/pcu_e/pcu_e.c +++ b/board/siemens/pcu_e/pcu_e.c @@ -404,10 +404,10 @@ int do_puma (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD (puma, 4, 1, do_puma, - "access PUMA FPGA", - "status - print PUMA status\n" - "puma load addr len - load PUMA configuration data\n"); - + "access PUMA FPGA", + "status - print PUMA status\n" + "puma load addr len - load PUMA configuration data" +); #endif /* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */ diff --git a/board/ssv/common/cmd_sled.c b/board/ssv/common/cmd_sled.c index 99ff507608..449c1a4994 100644 --- a/board/ssv/common/cmd_sled.c +++ b/board/ssv/common/cmd_sled.c @@ -157,6 +157,6 @@ int do_sled (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD (sled, 3, 0, do_sled, "check and set status led", - "sled [name [state]]\n" __NAME_STR " - state: on|off|blink\n"); + "sled [name [state]]\n" __NAME_STR " - state: on|off|blink"); #endif #endif /* CONFIG_STATUS_LED */ diff --git a/board/ssv/common/wd_pio.c b/board/ssv/common/wd_pio.c index 9b384259e4..eaf1d2526c 100644 --- a/board/ssv/common/wd_pio.c +++ b/board/ssv/common/wd_pio.c @@ -154,7 +154,7 @@ U_BOOT_CMD( "check and set watchdog", "on - switch watchDog on\n" "wd off - switch watchdog off\n" - "wd - print current status\n" + "wd - print current status" ); #endif #endif /* CONFIG_HW_WATCHDOG */ diff --git a/board/tqc/tqm5200/cmd_stk52xx.c b/board/tqc/tqm5200/cmd_stk52xx.c index 20632a7f1e..e309beb1dc 100644 --- a/board/tqc/tqm5200/cmd_stk52xx.c +++ b/board/tqc/tqm5200/cmd_stk52xx.c @@ -1201,21 +1201,21 @@ U_BOOT_CMD( "sound square [duration] [freq] [channel]\n" " - generate squarewave for 'duration' ms with frequency 'freq'\n" " on left \"l\" or right \"r\" channel\n" - "pcm1772 reg val\n" + "pcm1772 reg val" ); U_BOOT_CMD( wav , 3, 1, cmd_wav, "play wav file", "[addr] [bytes]\n" - " - play wav file at address 'addr' with length 'bytes'\n" + " - play wav file at address 'addr' with length 'bytes'" ); U_BOOT_CMD( beep , 2, 1, cmd_beep, "play short beep", "[channel]\n" - " - play short beep on \"l\"eft or \"r\"ight channel\n" + " - play short beep on \"l\"eft or \"r\"ight channel" ); #endif /* CONFIG_STK52XX || CONFIG_FO300 */ @@ -1228,10 +1228,11 @@ U_BOOT_CMD( "fkt can\n" " - loopback plug for X83 required\n" "fkt rs232 number\n" - " - loopback plug(s) for X2 required\n" + " - loopback plug(s) for X2 required" #ifndef CONFIG_TQM5200S + "\n" "fkt backlight on/off\n" - " - switch backlight on or off\n" + " - switch backlight on or off" #endif /* !CONFIG_TQM5200S */ ); #elif defined(CONFIG_FO300) @@ -1241,7 +1242,7 @@ U_BOOT_CMD( "fkt can\n" " - loopback plug for X16/X29 required\n" "fkt rs232 number\n" - " - loopback plug(s) for X21/X22 required\n" + " - loopback plug(s) for X21/X22 required" ); #endif #endif diff --git a/board/tqc/tqm5200/cmd_tb5200.c b/board/tqc/tqm5200/cmd_tb5200.c index b9c9e7e194..578e716e7a 100644 --- a/board/tqc/tqm5200/cmd_tb5200.c +++ b/board/tqc/tqm5200/cmd_tb5200.c @@ -91,13 +91,13 @@ int cmd_backlight(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( led , 2, 1, cmd_led, "switch status LED on or off", - "on/off\n" + "on/off" ); U_BOOT_CMD( backlight , 2, 1, cmd_backlight, "switch backlight on or off", - "on/off\n" + "on/off" ); #endif /* CONFIG_STK52XX */ diff --git a/board/tqc/tqm8272/tqm8272.c b/board/tqc/tqm8272/tqm8272.c index 5bc080ff81..92f74a39cc 100644 --- a/board/tqc/tqm8272/tqm8272.c +++ b/board/tqc/tqm8272/tqm8272.c @@ -867,7 +867,7 @@ int do_hwib_dump (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( hwib, 1, 1, do_hwib_dump, "dump HWIB'", - "\n" + "" ); #ifdef CONFIG_SYS_UPDATE_FLASH_SIZE diff --git a/board/trab/cmd_trab.c b/board/trab/cmd_trab.c index 7e2a672348..d0465fb7e6 100644 --- a/board/trab/cmd_trab.c +++ b/board/trab/cmd_trab.c @@ -262,7 +262,7 @@ U_BOOT_CMD( "\n" " - start burn-in test application\n" " The burn-in test could took a while to finish!\n" - " The content of the onboard EEPROM is modified!\n" + " The content of the onboard EEPROM is modified!" ); @@ -295,7 +295,7 @@ U_BOOT_CMD( "read dip switch on TRAB", "\n" " - read state of dip switch (S1) on TRAB board\n" - " read sequence: 1-2-3-4; ON=1; OFF=0; e.g.: \"0100\"\n" + " read sequence: 1-2-3-4; ON=1; OFF=0; e.g.: \"0100\"" ); @@ -323,7 +323,7 @@ U_BOOT_CMD( vcc5v, 1, 1, do_vcc5v, "read VCC5V on TRAB", "\n" - " - read actual value of voltage VCC5V\n" + " - read actual value of voltage VCC5V" ); @@ -347,7 +347,7 @@ int do_contact_temp (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( c_temp, 1, 1, do_contact_temp, "read contact temperature on TRAB", - "\n" + "" " - reads the onboard temperature (=contact temperature)\n" ); @@ -401,7 +401,7 @@ U_BOOT_CMD( "print burn in status on TRAB", "\n" " - prints the status variables of the last burn in test\n" - " stored in the onboard EEPROM on TRAB board\n" + " stored in the onboard EEPROM on TRAB board" ); static int read_dip (void) @@ -890,7 +890,7 @@ U_BOOT_CMD( "delay\n" " - contact temperature [1/100 C] is printed endlessly to console\n" " <delay> specifies the seconds to wait between two measurements\n" - " For each measurment a timestamp is printeted\n" + " For each measurment a timestamp is printeted" ); #endif diff --git a/board/trab/trab.c b/board/trab/trab.c index 53590650f1..ddf6abf7b4 100644 --- a/board/trab/trab.c +++ b/board/trab/trab.c @@ -323,7 +323,7 @@ int do_kbd (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( kbd, 1, 1, do_kbd, "read keyboard status", - NULL + "" ); #ifdef CONFIG_MODEM_SUPPORT diff --git a/board/trizepsiv/eeprom.c b/board/trizepsiv/eeprom.c index 9fa7aef9a2..b6b16bf680 100644 --- a/board/trizepsiv/eeprom.c +++ b/board/trizepsiv/eeprom.c @@ -81,4 +81,5 @@ U_BOOT_CMD( "\tdm9000ee read \n" "\tword:\t\t00-02 : MAC Address\n" "\t\t\t03-07 : DM9000 Configuration\n" - "\t\t\t08-63 : User data\n"); + "\t\t\t08-63 : User data" +); diff --git a/board/w7o/cmd_vpd.c b/board/w7o/cmd_vpd.c index eaec940e67..013fc791f2 100644 --- a/board/w7o/cmd_vpd.c +++ b/board/w7o/cmd_vpd.c @@ -60,7 +60,7 @@ U_BOOT_CMD( vpd, 2, 1, do_vpd, "Read Vital Product Data", "[dev_addr]\n" - " - Read VPD Data from default address, or device address 'dev_addr'.\n" + " - Read VPD Data from default address, or device address 'dev_addr'." ); #endif diff --git a/board/zeus/update.c b/board/zeus/update.c index ce1f34fee2..c8487e58f8 100644 --- a/board/zeus/update.c +++ b/board/zeus/update.c @@ -99,7 +99,7 @@ int do_update_boot_eeprom(cmd_tbl_t* cmdtp, int flag, int argc, char* argv[]) U_BOOT_CMD ( update_boot_eeprom, 1, 1, do_update_boot_eeprom, "update boot eeprom content", - NULL + "" ); #endif diff --git a/board/zeus/zeus.c b/board/zeus/zeus.c index 3f329c2fc9..9bc390f837 100644 --- a/board/zeus/zeus.c +++ b/board/zeus/zeus.c @@ -328,7 +328,7 @@ int do_set_default(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( setdef, 4, 1, do_set_default, "write board-specific values to EEPROM (ethaddr...)", - "ethaddr eth1addr serial#\n - write board-specific values to EEPROM\n" + "ethaddr eth1addr serial#\n - write board-specific values to EEPROM" ); static inline int sw_reset_pressed(void) @@ -419,7 +419,7 @@ int do_chkreset(cmd_tbl_t* cmdtp, int flag, int argc, char* argv[]) U_BOOT_CMD ( chkreset, 1, 1, do_chkreset, "Check for status of SW-reset button and act accordingly", - NULL + "" ); #if defined(CONFIG_POST) diff --git a/common/cmd_ambapp.c b/common/cmd_ambapp.c index 06531f12b3..bb20ab5149 100644 --- a/common/cmd_ambapp.c +++ b/common/cmd_ambapp.c @@ -273,6 +273,7 @@ int ambapp_init_reloc(void) } U_BOOT_CMD(ambapp, 1, 1, do_ambapp_print, - "list AMBA Plug&Play information", - "ambapp\n" - " - lists AMBA (AHB & APB) Plug&Play devices present on the system\n"); + "list AMBA Plug&Play information", + "ambapp\n" + " - lists AMBA (AHB & APB) Plug&Play devices present on the system" +); diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c index b230924ee7..11c154731e 100644 --- a/common/cmd_bdinfo.c +++ b/common/cmd_bdinfo.c @@ -384,5 +384,5 @@ static void print_str(const char *name, const char *str) U_BOOT_CMD( bdinfo, 1, 1, do_bdinfo, "print Board Info structure", - NULL + "" ); diff --git a/common/cmd_bedbug.c b/common/cmd_bedbug.c index cd9e720fc6..8be1c25fd7 100644 --- a/common/cmd_bedbug.c +++ b/common/cmd_bedbug.c @@ -108,7 +108,7 @@ int do_bedbug_dis (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD (ds, 3, 1, do_bedbug_dis, "disassemble memory", - "ds <address> [# instructions]\n"); + "ds <address> [# instructions]"); /* ====================================================================== * Entry point from the interpreter to the assembler. Assembles @@ -160,7 +160,7 @@ int do_bedbug_asm (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) } /* do_bedbug_asm */ U_BOOT_CMD (as, 2, 0, do_bedbug_asm, - "assemble memory", "as <address>\n"); + "assemble memory", "as <address>"); /* ====================================================================== * Used to set a break point from the interpreter. Simply calls into the @@ -181,7 +181,7 @@ U_BOOT_CMD (break, 3, 0, do_bedbug_break, " - Set or clear a breakpoint\n" "break <address> - Break at an address\n" "break off <bp#> - Disable breakpoint.\n" - "break show - List breakpoints.\n"); + "break show - List breakpoints."); /* ====================================================================== * Called from the debug interrupt routine. Simply calls the CPU-specific @@ -278,7 +278,7 @@ int do_bedbug_continue (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD (continue, 1, 0, do_bedbug_continue, "continue from a breakpoint", - " - continue from a breakpoint.\n"); + ""); /* ====================================================================== * Interpreter command to continue to the next instruction, stepping into @@ -309,7 +309,7 @@ int do_bedbug_step (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD (step, 1, 1, do_bedbug_step, "single step execution.", - " - single step execution.\n"); + ""); /* ====================================================================== * Interpreter command to continue to the next instruction, stepping over @@ -340,7 +340,7 @@ int do_bedbug_next (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD (next, 1, 1, do_bedbug_next, "single step execution, stepping over subroutines.", - " - single step execution, stepping over subroutines.\n"); + ""); /* ====================================================================== * Interpreter command to print the current stack. This assumes an EABI @@ -385,7 +385,7 @@ int do_bedbug_stack (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD (where, 1, 1, do_bedbug_stack, "Print the running stack.", - " - Print the running stack.\n"); + ""); /* ====================================================================== * Interpreter command to dump the registers. Calls the CPU-specific @@ -405,7 +405,7 @@ int do_bedbug_rdump (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) } /* do_bedbug_rdump */ U_BOOT_CMD (rdump, 1, 1, do_bedbug_rdump, - "Show registers.", " - Show registers.\n"); + "Show registers.", ""); /* ====================================================================== */ diff --git a/common/cmd_bmp.c b/common/cmd_bmp.c index abbb0704fb..fc8462ead1 100644 --- a/common/cmd_bmp.c +++ b/common/cmd_bmp.c @@ -141,7 +141,7 @@ U_BOOT_CMD( bmp, 5, 1, do_bmp, "manipulate BMP image data", "info <imageAddr> - display image info\n" - "bmp display <imageAddr> [x y] - display image at x,y\n" + "bmp display <imageAddr> [x y] - display image at x,y" ); /* diff --git a/common/cmd_boot.c b/common/cmd_boot.c index efc1a0262f..bfc1db21d2 100644 --- a/common/cmd_boot.c +++ b/common/cmd_boot.c @@ -66,7 +66,7 @@ U_BOOT_CMD( go, CONFIG_SYS_MAXARGS, 1, do_go, "start application at address 'addr'", "addr [arg ...]\n - start application at address 'addr'\n" - " passing 'arg' as arguments\n" + " passing 'arg' as arguments" ); extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); @@ -74,5 +74,5 @@ extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); U_BOOT_CMD( reset, 1, 0, do_reset, "Perform RESET of the CPU", - NULL + "" ); diff --git a/common/cmd_bootldr.c b/common/cmd_bootldr.c index 48d113f1f1..b2a8b0e190 100644 --- a/common/cmd_bootldr.c +++ b/common/cmd_bootldr.c @@ -170,4 +170,5 @@ int do_bootldr(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD(bootldr, 2, 0, do_bootldr, "boot ldr image from memory", "[addr]\n" - " - boot ldr image stored in memory\n"); + "" +); diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c index bd1813ad42..367d5a7a94 100644 --- a/common/cmd_bootm.c +++ b/common/cmd_bootm.c @@ -948,7 +948,7 @@ U_BOOT_CMD( "\tbdt - OS specific bd_t processing\n" "\tcmdline - OS specific command line processing/setup\n" "\tprep - OS specific prep before relocation or go\n" - "\tgo - start OS\n" + "\tgo - start OS" ); /*******************************************************************/ @@ -973,14 +973,14 @@ int do_bootd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( boot, 1, 1, do_bootd, "boot default, i.e., run 'bootcmd'", - NULL + "" ); /* keep old command name "bootd" for backward compatibility */ U_BOOT_CMD( bootd, 1, 1, do_bootd, "boot default, i.e., run 'bootcmd'", - NULL + "" ); #endif @@ -1068,7 +1068,7 @@ U_BOOT_CMD( "addr [addr ...]\n" " - print header information for application image starting at\n" " address 'addr' in memory; this includes verification of the\n" - " image contents (magic number, header and payload checksums)\n" + " image contents (magic number, header and payload checksums)" ); #endif @@ -1135,7 +1135,7 @@ U_BOOT_CMD( "list all images found in flash", "\n" " - Prints information about all images found at sector\n" - " boundaries in flash.\n" + " boundaries in flash." ); #endif diff --git a/common/cmd_cache.c b/common/cmd_cache.c index c0f2cbaf67..0dfa3363bd 100644 --- a/common/cmd_cache.c +++ b/common/cmd_cache.c @@ -99,14 +99,14 @@ U_BOOT_CMD( icache, 2, 1, do_icache, "enable or disable instruction cache", "[on, off]\n" - " - enable or disable instruction cache\n" + " - enable or disable instruction cache" ); U_BOOT_CMD( dcache, 2, 1, do_dcache, "enable or disable data cache", "[on, off]\n" - " - enable or disable data (writethrough) cache\n" + " - enable or disable data (writethrough) cache" ); #endif diff --git a/common/cmd_cplbinfo.c b/common/cmd_cplbinfo.c index 56e70d6155..1a044d2901 100644 --- a/common/cmd_cplbinfo.c +++ b/common/cmd_cplbinfo.c @@ -55,5 +55,5 @@ int do_cplbinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD(cplbinfo, 1, 0, do_cplbinfo, "display current CPLB tables", - "\n" - " - display current CPLB tables\n"); + "" +); diff --git a/common/cmd_dataflash_mmc_mux.c b/common/cmd_dataflash_mmc_mux.c index 4b2cf1c2c2..97e303e943 100644 --- a/common/cmd_dataflash_mmc_mux.c +++ b/common/cmd_dataflash_mmc_mux.c @@ -61,5 +61,5 @@ U_BOOT_CMD( dataflash_mmc_mux, 2, 1, do_dataflash_mmc_mux, "dataflash_mmc_mux\t- enable or disable MMC or SPI\n", "[mmc, spi]\n" - " - enable or disable MMC or SPI\n" + " - enable or disable MMC or SPI" ); diff --git a/common/cmd_date.c b/common/cmd_date.c index 3d78be2696..b69e935085 100644 --- a/common/cmd_date.c +++ b/common/cmd_date.c @@ -218,5 +218,5 @@ U_BOOT_CMD( "[MMDDhhmm[[CC]YY][.ss]]\ndate reset\n" " - without arguments: print date & time\n" " - with numeric argument: set the system date & time\n" - " - with 'reset' argument: reset the RTC\n" + " - with 'reset' argument: reset the RTC" ); diff --git a/common/cmd_dcr.c b/common/cmd_dcr.c index 7aed06c117..4f23b8d591 100644 --- a/common/cmd_dcr.c +++ b/common/cmd_dcr.c @@ -224,22 +224,22 @@ int do_setidcr (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( getdcr, 2, 1, do_getdcr, "Get an AMCC PPC 4xx DCR's value", - "dcrn - return a DCR's value.\n" + "dcrn - return a DCR's value." ); U_BOOT_CMD( setdcr, 2, 1, do_setdcr, "Set an AMCC PPC 4xx DCR's value", - "dcrn - set a DCR's value.\n" + "dcrn - set a DCR's value." ); U_BOOT_CMD( getidcr, 3, 1, do_getidcr, "Get a register value via indirect DCR addressing", - "adr_dcrn[.dat_dcrn] offset - write offset to adr_dcrn, read value from dat_dcrn.\n" + "adr_dcrn[.dat_dcrn] offset - write offset to adr_dcrn, read value from dat_dcrn." ); U_BOOT_CMD( setidcr, 4, 1, do_setidcr, "Set a register value via indirect DCR addressing", - "adr_dcrn[.dat_dcrn] offset value - write offset to adr_dcrn, write value to dat_dcrn.\n" + "adr_dcrn[.dat_dcrn] offset value - write offset to adr_dcrn, write value to dat_dcrn." ); diff --git a/common/cmd_df.c b/common/cmd_df.c index d64f9009d7..7f957fed47 100644 --- a/common/cmd_df.c +++ b/common/cmd_df.c @@ -34,4 +34,4 @@ usage: U_BOOT_CMD( sf, 2, 1, do_serial_flash, "Serial flash sub-system", - "probe [bus:]cs - init flash device on given SPI bus and CS\n") + "probe [bus:]cs - init flash device on given SPI bus and CS") diff --git a/common/cmd_diag.c b/common/cmd_diag.c index c2a617547f..0436c492f4 100644 --- a/common/cmd_diag.c +++ b/common/cmd_diag.c @@ -72,5 +72,5 @@ U_BOOT_CMD( " - print information about specified tests\n" "diag run - run all available tests\n" "diag run [test1 [test2]]\n" - " - run specified tests\n" + " - run specified tests" ); diff --git a/common/cmd_display.c b/common/cmd_display.c index 4102424d14..34223952ee 100644 --- a/common/cmd_display.c +++ b/common/cmd_display.c @@ -74,5 +74,5 @@ U_BOOT_CMD( "display string on dot matrix display", "[<string>]\n" " - with <string> argument: display <string> on dot matrix display\n" - " - without arguments: clear dot matrix display\n" + " - without arguments: clear dot matrix display" ); diff --git a/common/cmd_doc.c b/common/cmd_doc.c index 3385c6736f..5cc90f064d 100644 --- a/common/cmd_doc.c +++ b/common/cmd_doc.c @@ -202,7 +202,7 @@ U_BOOT_CMD( "doc write addr off size - read/write `size'" " bytes starting at offset `off'\n" " to/from memory address `addr'\n" - "doc erase off size - erase `size' bytes of DOC from offset `off'\n" + "doc erase off size - erase `size' bytes of DOC from offset `off'" ); int do_docboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) @@ -342,7 +342,7 @@ int do_docboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( docboot, 4, 1, do_docboot, "boot from DOC device", - "loadAddr dev\n" + "loadAddr dev" ); int doc_rw (struct DiskOnChip* this, int cmd, diff --git a/common/cmd_dtt.c b/common/cmd_dtt.c index 7783c880ba..3cfd36ef73 100644 --- a/common/cmd_dtt.c +++ b/common/cmd_dtt.c @@ -55,6 +55,6 @@ int do_dtt (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( dtt, 1, 1, do_dtt, - "Digital Thermometer and Thermostat", - " - Read temperature from digital thermometer and thermostat.\n" + "Read temperature from Digital Thermometer and Thermostat", + "" ); diff --git a/common/cmd_eeprom.c b/common/cmd_eeprom.c index f749087ebc..102efaf5b6 100644 --- a/common/cmd_eeprom.c +++ b/common/cmd_eeprom.c @@ -424,7 +424,7 @@ U_BOOT_CMD( "EEPROM sub-system", "read devaddr addr off cnt\n" "eeprom write devaddr addr off cnt\n" - " - read/write `cnt' bytes from `devaddr` EEPROM at offset `off'\n" + " - read/write `cnt' bytes from `devaddr` EEPROM at offset `off'" ); #else /* One EEPROM */ U_BOOT_CMD( @@ -432,7 +432,7 @@ U_BOOT_CMD( "EEPROM sub-system", "read addr off cnt\n" "eeprom write addr off cnt\n" - " - read/write `cnt' bytes at EEPROM offset `off'\n" + " - read/write `cnt' bytes at EEPROM offset `off'" ); #endif /* CONFIG_SYS_I2C_MULTI_EEPROMS */ diff --git a/common/cmd_elf.c b/common/cmd_elf.c index 83e758999a..abec7ddc9a 100644 --- a/common/cmd_elf.c +++ b/common/cmd_elf.c @@ -313,11 +313,11 @@ unsigned long load_elf_image (unsigned long addr) U_BOOT_CMD( bootelf, 2, 0, do_bootelf, "Boot from an ELF image in memory", - " [address] - load address of ELF image.\n" + " [address] - load address of ELF image." ); U_BOOT_CMD( bootvx, 2, 0, do_bootvx, "Boot vxWorks from an ELF image", - " [address] - load address of vxWorks ELF image.\n" + " [address] - load address of vxWorks ELF image." ); diff --git a/common/cmd_ext2.c b/common/cmd_ext2.c index 923b355673..6ee60c66f2 100644 --- a/common/cmd_ext2.c +++ b/common/cmd_ext2.c @@ -118,7 +118,7 @@ U_BOOT_CMD( ext2ls, 4, 1, do_ext2ls, "list files in a directory (default /)", "<interface> <dev[:part]> [directory]\n" - " - list files from 'dev' on 'interface' in a 'directory'\n" + " - list files from 'dev' on 'interface' in a 'directory'" ); /****************************************************************************** @@ -256,5 +256,5 @@ U_BOOT_CMD( "load binary file from a Ext2 filesystem", "<interface> <dev[:part]> [addr] [filename] [bytes]\n" " - load binary file 'filename' from 'dev' on 'interface'\n" - " to address 'addr' from ext2 filesystem\n" + " to address 'addr' from ext2 filesystem" ); diff --git a/common/cmd_fat.c b/common/cmd_fat.c index 4a26b8072e..f3089a296e 100644 --- a/common/cmd_fat.c +++ b/common/cmd_fat.c @@ -91,7 +91,7 @@ U_BOOT_CMD( "load binary file from a dos filesystem", "<interface> <dev[:part]> <addr> <filename> [bytes]\n" " - load binary file 'filename' from 'dev' on 'interface'\n" - " to address 'addr' from dos filesystem\n" + " to address 'addr' from dos filesystem" ); int do_fat_ls (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) @@ -138,7 +138,7 @@ U_BOOT_CMD( fatls, 4, 1, do_fat_ls, "list files in a directory (default /)", "<interface> <dev[:part]> [directory]\n" - " - list files from 'dev' on 'interface' in a 'directory'\n" + " - list files from 'dev' on 'interface' in a 'directory'" ); int do_fat_fsinfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) @@ -176,7 +176,7 @@ U_BOOT_CMD( fatinfo, 3, 1, do_fat_fsinfo, "print information about filesystem", "<interface> <dev[:part]>\n" - " - print information about filesystem from 'dev' on 'interface'\n" + " - print information about filesystem from 'dev' on 'interface'" ); #ifdef NOT_IMPLEMENTED_YET diff --git a/common/cmd_fdc.c b/common/cmd_fdc.c index c043b97650..8e18c71bf4 100644 --- a/common/cmd_fdc.c +++ b/common/cmd_fdc.c @@ -903,6 +903,6 @@ int do_fdcboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( fdcboot, 3, 1, do_fdcboot, "boot from floppy device", - "loadAddr drive\n" + "loadAddr drive" ); #endif diff --git a/common/cmd_fdos.c b/common/cmd_fdos.c index bcf98d9e4b..3cc658624d 100644 --- a/common/cmd_fdos.c +++ b/common/cmd_fdos.c @@ -143,11 +143,11 @@ int do_fdosls(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( fdosboot, 3, 0, do_fdosboot, "boot from a dos floppy file", - "[loadAddr] [filename]\n" + "[loadAddr] [filename]" ); U_BOOT_CMD( fdosls, 2, 0, do_fdosls, "list files in a directory", - "[directory]\n" + "[directory]" ); diff --git a/common/cmd_fdt.c b/common/cmd_fdt.c index 0947b72d20..86837723b5 100644 --- a/common/cmd_fdt.c +++ b/common/cmd_fdt.c @@ -840,5 +840,5 @@ U_BOOT_CMD( "fdt chosen [<start> <end>] - Add/update the /chosen branch in the tree\n" " <start>/<end> - initrd start/end addr\n" "NOTE: Dereference aliases by omiting the leading '/', " - "e.g. fdt print ethernet0.\n" + "e.g. fdt print ethernet0." ); diff --git a/common/cmd_flash.c b/common/cmd_flash.c index f1f3517b12..9f27ab0dd9 100644 --- a/common/cmd_flash.c +++ b/common/cmd_flash.c @@ -712,7 +712,7 @@ U_BOOT_CMD( flinfo, 2, 1, do_flinfo, "print FLASH memory information", "\n - print information for all FLASH memory banks\n" - "flinfo N\n - print information for FLASH memory bank # N\n" + "flinfo N\n - print information for FLASH memory bank # N" ); U_BOOT_CMD( @@ -726,7 +726,7 @@ U_BOOT_CMD( "erase N:SF[-SL]\n - erase sectors SF-SL in FLASH bank # N\n" "erase bank N\n - erase FLASH bank # N\n" TMP_ERASE - "erase all\n - erase all FLASH banks\n" + "erase all\n - erase all FLASH banks" ); U_BOOT_CMD( @@ -751,7 +751,7 @@ U_BOOT_CMD( " - make sectors SF-SL writable in FLASH bank # N\n" "protect off bank N\n - make FLASH bank # N writable\n" TMP_PROT_OFF - "protect off all\n - make all FLASH banks writable\n" + "protect off all\n - make all FLASH banks writable" ); #undef TMP_ERASE diff --git a/common/cmd_fpga.c b/common/cmd_fpga.c index 362bffdcd5..2e017b84d8 100644 --- a/common/cmd_fpga.c +++ b/common/cmd_fpga.c @@ -357,9 +357,10 @@ U_BOOT_CMD (fpga, 6, 1, do_fpga, "\tload\tLoad device from memory buffer\n" "\tloadb\tLoad device from bitstream buffer (Xilinx devices only)\n" "\tloadmk\tLoad device generated with mkimage\n" - "\tdump\tLoad device to memory buffer\n" + "\tdump\tLoad device to memory buffer" #if defined(CONFIG_FIT) + "\n" "\tFor loadmk operating on FIT format uImage address must include\n" - "\tsubimage unit name in the form of addr:<subimg_uname>\n" + "\tsubimage unit name in the form of addr:<subimg_uname>" #endif ); diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c index b922b966af..ae26845161 100644 --- a/common/cmd_i2c.c +++ b/common/cmd_i2c.c @@ -1315,9 +1315,10 @@ U_BOOT_CMD( "i2c crc32 chip address[.0, .1, .2] count - compute CRC32 checksum\n" "i2c probe - show devices on the I2C bus\n" "i2c reset - re-init the I2C Controller\n" - "i2c loop chip address[.0, .1, .2] [# of objects] - looping read of device\n" + "i2c loop chip address[.0, .1, .2] [# of objects] - looping read of device" #if defined(CONFIG_CMD_SDRAM) - "i2c sdram chip - print SDRAM configuration information\n" + "\n" + "i2c sdram chip - print SDRAM configuration information" #endif ); diff --git a/common/cmd_ide.c b/common/cmd_ide.c index d86bf37030..feda773bee 100644 --- a/common/cmd_ide.c +++ b/common/cmd_ide.c @@ -2108,11 +2108,11 @@ U_BOOT_CMD( "ide read addr blk# cnt\n" "ide write addr blk# cnt - read/write `cnt'" " blocks starting at block `blk#'\n" - " to/from memory address `addr'\n" + " to/from memory address `addr'" ); U_BOOT_CMD( diskboot, 3, 1, do_diskboot, "boot from IDE device", - "loadAddr dev:part\n" + "loadAddr dev:part" ); diff --git a/common/cmd_immap.c b/common/cmd_immap.c index c8367f0fb3..37e60582f6 100644 --- a/common/cmd_immap.c +++ b/common/cmd_immap.c @@ -615,39 +615,39 @@ do_mccinfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( siuinfo, 1, 1, do_siuinfo, "print System Interface Unit (SIU) registers", - NULL + "" ); U_BOOT_CMD( memcinfo, 1, 1, do_memcinfo, "print Memory Controller registers", - NULL + "" ); U_BOOT_CMD( sitinfo, 1, 1, do_sitinfo, "print System Integration Timers (SIT) registers", - NULL + "" ); #ifdef CONFIG_8260 U_BOOT_CMD( icinfo, 1, 1, do_icinfo, "print Interrupt Controller registers", - NULL + "" ); #endif U_BOOT_CMD( carinfo, 1, 1, do_carinfo, "print Clocks and Reset registers", - NULL + "" ); U_BOOT_CMD( iopinfo, 1, 1, do_iopinfo, "print I/O Port registers", - NULL + "" ); U_BOOT_CMD( @@ -659,62 +659,61 @@ U_BOOT_CMD( U_BOOT_CMD( dmainfo, 1, 1, do_dmainfo, "print SDMA/IDMA registers", - NULL + "" ); U_BOOT_CMD( fccinfo, 1, 1, do_fccinfo, "print FCC registers", - NULL + "" ); U_BOOT_CMD( brginfo, 1, 1, do_brginfo, "print Baud Rate Generator (BRG) registers", - NULL + "" ); U_BOOT_CMD( i2cinfo, 1, 1, do_i2cinfo, "print I2C registers", - NULL + "" ); U_BOOT_CMD( sccinfo, 1, 1, do_sccinfo, "print SCC registers", - NULL + "" ); U_BOOT_CMD( smcinfo, 1, 1, do_smcinfo, "print SMC registers", - NULL + "" ); U_BOOT_CMD( spiinfo, 1, 1, do_spiinfo, "print Serial Peripheral Interface (SPI) registers", - NULL + "" ); U_BOOT_CMD( muxinfo, 1, 1, do_muxinfo, "print CPM Multiplexing registers", - NULL + "" ); U_BOOT_CMD( siinfo, 1, 1, do_siinfo, "print Serial Interface (SI) registers", - NULL + "" ); U_BOOT_CMD( mccinfo, 1, 1, do_mccinfo, "print MCC registers", - NULL + "" ); - #endif diff --git a/common/cmd_irq.c b/common/cmd_irq.c index a21aedea40..4604a5a31e 100644 --- a/common/cmd_irq.c +++ b/common/cmd_irq.c @@ -45,6 +45,5 @@ int do_interrupts(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( interrupts, 5, 0, do_interrupts, "enable or disable interrupts", - "[on, off]\n" - " - enable or disable interrupts\n" + "[on, off]" ); diff --git a/common/cmd_itest.c b/common/cmd_itest.c index 309b08bb03..5b301bf5a5 100644 --- a/common/cmd_itest.c +++ b/common/cmd_itest.c @@ -191,5 +191,5 @@ int do_itest ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[] ) U_BOOT_CMD( itest, 4, 0, do_itest, "return true/false on integer compare", - "[.b, .w, .l, .s] [*]value1 <op> [*]value2\n" + "[.b, .w, .l, .s] [*]value1 <op> [*]value2" ); diff --git a/common/cmd_jffs2.c b/common/cmd_jffs2.c index 3bb6c3cb15..4db4a83aa8 100644 --- a/common/cmd_jffs2.c +++ b/common/cmd_jffs2.c @@ -636,18 +636,17 @@ U_BOOT_CMD( "load binary file from a filesystem image", "[ off ] [ filename ]\n" " - load binary file from flash bank\n" - " with offset 'off'\n" + " with offset 'off'" ); U_BOOT_CMD( ls, 2, 1, do_jffs2_ls, "list files in a directory (default /)", - "[ directory ]\n" - " - list files in a directory.\n" + "[ directory ]" ); U_BOOT_CMD( fsinfo, 1, 1, do_jffs2_fsinfo, "print information about filesystems", - " - print information about filesystems\n" + "" ); /***************************************************/ diff --git a/common/cmd_license.c b/common/cmd_license.c index c3c34967db..141215b3a5 100644 --- a/common/cmd_license.c +++ b/common/cmd_license.c @@ -53,7 +53,8 @@ int do_license(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(license, 1, 1, do_license, - "print GPL license text", - NULL); + "print GPL license text", + "" +); #endif /* CONFIG_CMD_LICENSE */ diff --git a/common/cmd_load.c b/common/cmd_load.c index 2b5a66dd6f..73fbf743c9 100644 --- a/common/cmd_load.c +++ b/common/cmd_load.c @@ -1049,7 +1049,7 @@ U_BOOT_CMD( "load S-Record file over serial line", "[ off ] [ baud ]\n" " - load S-Record file over serial line" - " with offset 'off' and baudrate 'baud'\n" + " with offset 'off' and baudrate 'baud'" ); #else /* ! CONFIG_SYS_LOADS_BAUD_CHANGE */ @@ -1057,7 +1057,7 @@ U_BOOT_CMD( loads, 2, 0, do_load_serial, "load S-Record file over serial line", "[ off ]\n" - " - load S-Record file over serial line with offset 'off'\n" + " - load S-Record file over serial line with offset 'off'" ); #endif /* CONFIG_SYS_LOADS_BAUD_CHANGE */ @@ -1073,14 +1073,14 @@ U_BOOT_CMD( "save S-Record file over serial line", "[ off ] [size] [ baud ]\n" " - save S-Record file over serial line" - " with offset 'off', size 'size' and baudrate 'baud'\n" + " with offset 'off', size 'size' and baudrate 'baud'" ); #else /* ! CONFIG_SYS_LOADS_BAUD_CHANGE */ U_BOOT_CMD( saves, 3, 0, do_save_serial, "save S-Record file over serial line", "[ off ] [size]\n" - " - save S-Record file over serial line with offset 'off' and size 'size'\n" + " - save S-Record file over serial line with offset 'off' and size 'size'" ); #endif /* CONFIG_SYS_LOADS_BAUD_CHANGE */ #endif @@ -1093,7 +1093,7 @@ U_BOOT_CMD( "load binary file over serial line (kermit mode)", "[ off ] [ baud ]\n" " - load binary file over serial line" - " with offset 'off' and baudrate 'baud'\n" + " with offset 'off' and baudrate 'baud'" ); U_BOOT_CMD( @@ -1101,7 +1101,7 @@ U_BOOT_CMD( "load binary file over serial line (ymodem mode)", "[ off ] [ baud ]\n" " - load binary file over serial line" - " with offset 'off' and baudrate 'baud'\n" + " with offset 'off' and baudrate 'baud'" ); #endif @@ -1130,8 +1130,8 @@ int do_hwflow (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( hwflow, 2, 0, do_hwflow, - "turn the harwdare flow control on/off", - "[on|off]\n - change RTS/CTS hardware flow control over serial line\n" + "turn RTS/CTS hardware flow control in serial line on/off", + "[on|off]" ); #endif diff --git a/common/cmd_log.c b/common/cmd_log.c index a03835d021..d422d9f924 100644 --- a/common/cmd_log.c +++ b/common/cmd_log.c @@ -256,7 +256,7 @@ U_BOOT_CMD( "info - show pointer details\n" "log reset - clear contents\n" "log show - show contents\n" - "log append <msg> - append <msg> to the logbuffer\n" + "log append <msg> - append <msg> to the logbuffer" ); static int logbuff_printk(const char *line) diff --git a/common/cmd_mac.c b/common/cmd_mac.c index cf601e4e60..20403da39d 100644 --- a/common/cmd_mac.c +++ b/common/cmd_mac.c @@ -44,20 +44,6 @@ U_BOOT_CMD( " - program date\n" "mac ports\n" " - program the number of ports\n" - "mac 0\n" - " - program the MAC address for port 0\n" - "mac 1\n" - " - program the MAC address for port 1\n" - "mac 2\n" - " - program the MAC address for port 2\n" - "mac 3\n" - " - program the MAC address for port 3\n" - "mac 4\n" - " - program the MAC address for port 4\n" - "mac 5\n" - " - program the MAC address for port 5\n" - "mac 6\n" - " - program the MAC address for port 6\n" - "mac 7\n" - " - program the MAC address for port 7\n" + "mac X\n" + " - program the MAC address for port X [X=0...7]" ); diff --git a/common/cmd_mem.c b/common/cmd_mem.c index 2d4fc2a419..cdf8c798dd 100644 --- a/common/cmd_mem.c +++ b/common/cmd_mem.c @@ -1172,39 +1172,39 @@ int do_unzip ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( md, 3, 1, do_mem_md, "memory display", - "[.b, .w, .l] address [# of objects]\n - memory display\n" + "[.b, .w, .l] address [# of objects]" ); U_BOOT_CMD( mm, 2, 1, do_mem_mm, - "memory modify (auto-incrementing)", - "[.b, .w, .l] address\n" " - memory modify, auto increment address\n" + "memory modify (auto-incrementing address)", + "[.b, .w, .l] address" ); U_BOOT_CMD( nm, 2, 1, do_mem_nm, "memory modify (constant address)", - "[.b, .w, .l] address\n - memory modify, read and keep address\n" + "[.b, .w, .l] address" ); U_BOOT_CMD( mw, 4, 1, do_mem_mw, "memory write (fill)", - "[.b, .w, .l] address value [count]\n - write memory\n" + "[.b, .w, .l] address value [count]" ); U_BOOT_CMD( cp, 4, 1, do_mem_cp, "memory copy", - "[.b, .w, .l] source target count\n - copy memory\n" + "[.b, .w, .l] source target count" ); U_BOOT_CMD( cmp, 4, 1, do_mem_cmp, "memory compare", - "[.b, .w, .l] addr1 addr2 count\n - compare memory\n" + "[.b, .w, .l] addr1 addr2 count" ); #ifndef CONFIG_CRC32_VERIFY @@ -1212,7 +1212,7 @@ U_BOOT_CMD( U_BOOT_CMD( crc32, 4, 1, do_mem_crc, "checksum calculation", - "address count [addr]\n - compute CRC32 checksum [save at addr]\n" + "address count [addr]\n - compute CRC32 checksum [save at addr]" ); #else /* CONFIG_CRC32_VERIFY */ @@ -1221,7 +1221,7 @@ U_BOOT_CMD( crc32, 5, 1, do_mem_crc, "checksum calculation", "address count [addr]\n - compute CRC32 checksum [save at addr]\n" - "-v address count crc\n - verify crc of memory area\n" + "-v address count crc\n - verify crc of memory area" ); #endif /* CONFIG_CRC32_VERIFY */ @@ -1230,43 +1230,40 @@ U_BOOT_CMD( base, 2, 1, do_mem_base, "print or set address offset", "\n - print address offset for memory commands\n" - "base off\n - set address offset for memory commands to 'off'\n" + "base off\n - set address offset for memory commands to 'off'" ); U_BOOT_CMD( loop, 3, 1, do_mem_loop, "infinite loop on address range", - "[.b, .w, .l] address number_of_objects\n" - " - loop on a set of addresses\n" + "[.b, .w, .l] address number_of_objects" ); #ifdef CONFIG_LOOPW U_BOOT_CMD( loopw, 4, 1, do_mem_loopw, "infinite write loop on address range", - "[.b, .w, .l] address number_of_objects data_to_write\n" - " - loop on a set of addresses\n" + "[.b, .w, .l] address number_of_objects data_to_write" ); #endif /* CONFIG_LOOPW */ U_BOOT_CMD( mtest, 5, 1, do_mem_mtest, - "simple RAM test", - "[start [end [pattern [iterations]]]]\n" - " - simple RAM read/write test\n" + "simple RAM read/write test", + "[start [end [pattern [iterations]]]]" ); #ifdef CONFIG_MX_CYCLIC U_BOOT_CMD( mdc, 4, 1, do_mem_mdc, "memory display cyclic", - "[.b, .w, .l] address count delay(ms)\n - memory display cyclic\n" + "[.b, .w, .l] address count delay(ms)" ); U_BOOT_CMD( mwc, 4, 1, do_mem_mwc, "memory write cyclic", - "[.b, .w, .l] address value delay(ms)\n - memory write cyclic\n" + "[.b, .w, .l] address value delay(ms)" ); #endif /* CONFIG_MX_CYCLIC */ @@ -1274,6 +1271,6 @@ U_BOOT_CMD( U_BOOT_CMD( unzip, 4, 1, do_unzip, "unzip a memory region", - "srcaddr dstaddr [dstsize]\n" + "srcaddr dstaddr [dstsize]" ); #endif /* CONFIG_CMD_UNZIP */ diff --git a/common/cmd_mfsl.c b/common/cmd_mfsl.c index 6470baceb8..b19ad0e638 100644 --- a/common/cmd_mfsl.c +++ b/common/cmd_mfsl.c @@ -394,8 +394,7 @@ U_BOOT_CMD (frd, 3, 1, do_frd, " 0 - non blocking data read\n" " 1 - non blocking control read\n" " 2 - blocking data read\n" - " 3 - blocking control read\n"); - + " 3 - blocking control read"); U_BOOT_CMD (fwr, 4, 1, do_fwr, "write data to FSL", @@ -403,11 +402,11 @@ U_BOOT_CMD (fwr, 4, 1, do_fwr, " 0 - non blocking data write\n" " 1 - non blocking control write\n" " 2 - blocking data write\n" - " 3 - blocking control write\n"); + " 3 - blocking control write"); U_BOOT_CMD (rspr, 3, 1, do_rspr, "read/write special purpose register", "- reg_num [write value] read/write special purpose register\n" " 1 - MSR - Machine status register\n" " 3 - EAR - Exception address register\n" - " 5 - ESR - Exception status register\n"); + " 5 - ESR - Exception status register"); diff --git a/common/cmd_mgdisk.c b/common/cmd_mgdisk.c index 48323d45be..aadc335636 100644 --- a/common/cmd_mgdisk.c +++ b/common/cmd_mgdisk.c @@ -70,7 +70,7 @@ U_BOOT_CMD( " - random read : mgd read [from] [to] [size]\n" " - random write : mgd write [from] [to] [size]\n" " - sector read : mgd readsec [sector] [to] [counts]\n" - " - sector write : mgd writesec [from] [sector] [counts]\n" + " - sector write : mgd writesec [from] [sector] [counts]" ); #endif diff --git a/common/cmd_mii.c b/common/cmd_mii.c index d70031aaa5..65e13c3eb2 100644 --- a/common/cmd_mii.c +++ b/common/cmd_mii.c @@ -460,5 +460,5 @@ U_BOOT_CMD( "mii read <addr> <reg> - read MII PHY <addr> register <reg>\n" "mii write <addr> <reg> <data> - write MII PHY <addr> register <reg>\n" "mii dump <addr> <reg> - pretty-print <addr> <reg> (0-5 only)\n" - "Addr and/or reg may be ranges, e.g. 2-7.\n" + "Addr and/or reg may be ranges, e.g. 2-7." ); diff --git a/common/cmd_misc.c b/common/cmd_misc.c index 024299a877..b97537ecd0 100644 --- a/common/cmd_misc.c +++ b/common/cmd_misc.c @@ -56,7 +56,7 @@ int do_irqinfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); U_BOOT_CMD( irqinfo, 1, 1, do_irqinfo, "print information about IRQs", - NULL + "" ); #endif @@ -64,5 +64,5 @@ U_BOOT_CMD( sleep , 2, 1, do_sleep, "delay execution for some time", "N\n" - " - delay execution for N seconds (N is _decimal_ !!!)\n" + " - delay execution for N seconds (N is _decimal_ !!!)" ); diff --git a/common/cmd_mmc.c b/common/cmd_mmc.c index 039fe59c75..32fe49b775 100644 --- a/common/cmd_mmc.c +++ b/common/cmd_mmc.c @@ -89,7 +89,7 @@ U_BOOT_CMD( mmc, 3, 1, do_mmc, "MMC sub-system", "init [dev] - init MMC sub system\n" - "mmc device [dev] - show or set current device\n" + "mmc device [dev] - show or set current device" ); #else /* !CONFIG_GENERIC_MMC */ @@ -135,9 +135,10 @@ int do_mmcinfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) return 0; } -U_BOOT_CMD(mmcinfo, 2, 0, do_mmcinfo, - "print MMC information", - "<dev num>\n"); +U_BOOT_CMD(mmcinfo, 2, 0, do_mmcinfo, + "mmcinfo <dev num>-- display MMC info\n", + "" +); int do_mmcops(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { @@ -231,5 +232,5 @@ U_BOOT_CMD( "read <device num> addr blk# cnt\n" "mmc write <device num> addr blk# cnt\n" "mmc rescan <device num>\n" - "mmc list - list available devices\n"); + "mmc list - lists available devices"); #endif diff --git a/common/cmd_mp.c b/common/cmd_mp.c index a0839c2fbb..faa8700132 100644 --- a/common/cmd_mp.c +++ b/common/cmd_mp.c @@ -78,7 +78,7 @@ cpu_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) " Default for r3 is <num> and r6 is 0\n" \ "\n" \ " When cpu <num> is released r4 and r5 = 0.\n" \ - " r7 will contain the size of the initial mapped area\n" + " r7 will contain the size of the initial mapped area" #endif U_BOOT_CMD( @@ -86,8 +86,9 @@ U_BOOT_CMD( "Multiprocessor CPU boot manipulation and release", "<num> reset - Reset cpu <num>\n" "cpu <num> status - Status of cpu <num>\n" - "cpu <num> release <addr> [args] - Release cpu <num> at <addr> with [args]\n" + "cpu <num> release <addr> [args] - Release cpu <num> at <addr> with [args]" #ifdef CPU_ARCH_HELP + "\n" CPU_ARCH_HELP #endif - ); +); diff --git a/common/cmd_mtdparts.c b/common/cmd_mtdparts.c index 8bd1db7d27..2d1446ecb8 100644 --- a/common/cmd_mtdparts.c +++ b/common/cmd_mtdparts.c @@ -1863,7 +1863,7 @@ U_BOOT_CMD( chpart, 2, 0, do_chpart, "change active partition", "part-id\n" - " - change active partition (e.g. part-id = nand0,1)\n" + " - change active partition (e.g. part-id = nand0,1)" ); U_BOOT_CMD( @@ -1898,6 +1898,6 @@ U_BOOT_CMD( "<size> := standard linux memsize OR '-' to denote all remaining space\n" "<offset> := partition start offset within the device\n" "<name> := '(' NAME ')'\n" - "<ro-flag> := when set to 'ro' makes partition read-only (not used, passed to kernel)\n" + "<ro-flag> := when set to 'ro' makes partition read-only (not used, passed to kernel)" ); /***************************************************/ diff --git a/common/cmd_nand.c b/common/cmd_nand.c index 1992531f44..94514160b5 100644 --- a/common/cmd_nand.c +++ b/common/cmd_nand.c @@ -476,25 +476,26 @@ usage: return 1; } -U_BOOT_CMD(nand, 5, 1, do_nand, - "NAND sub-system", - "info - show available NAND devices\n" - "nand device [dev] - show or set current device\n" - "nand read - addr off|partition size\n" - "nand write - addr off|partition size\n" - " read/write 'size' bytes starting at offset 'off'\n" - " to/from memory address 'addr', skipping bad blocks.\n" - "nand erase [clean] [off size] - erase 'size' bytes from\n" - " offset 'off' (entire device if not specified)\n" - "nand bad - show bad blocks\n" - "nand dump[.oob] off - dump page\n" - "nand scrub - really clean NAND erasing bad blocks (UNSAFE)\n" - "nand markbad off - mark bad block at offset (UNSAFE)\n" - "nand biterr off - make a bit error at offset (UNSAFE)\n" +U_BOOT_CMD(nand, CONFIG_SYS_MAXARGS, 1, do_nand, + "NAND sub-system", + "info - show available NAND devices\n" + "nand device [dev] - show or set current device\n" + "nand read - addr off|partition size\n" + "nand write - addr off|partition size\n" + " read/write 'size' bytes starting at offset 'off'\n" + " to/from memory address 'addr', skipping bad blocks.\n" + "nand erase [clean] [off size] - erase 'size' bytes from\n" + " offset 'off' (entire device if not specified)\n" + "nand bad - show bad blocks\n" + "nand dump[.oob] off - dump page\n" + "nand scrub - really clean NAND erasing bad blocks (UNSAFE)\n" + "nand markbad off [...] - mark bad block(s) at offset (UNSAFE)\n" + "nand biterr off - make a bit error at offset (UNSAFE)" #ifdef CONFIG_CMD_NAND_LOCK_UNLOCK - "nand lock [tight] [status]\n" - " bring nand to lock state or display locked pages\n" - "nand unlock [offset] [size] - unlock section\n" + "\n" + "nand lock [tight] [status]\n" + " bring nand to lock state or display locked pages\n" + "nand unlock [offset] [size] - unlock section" #endif ); @@ -673,8 +674,8 @@ usage: U_BOOT_CMD(nboot, 4, 1, do_nandboot, "boot from NAND device", - "[partition] | [[[loadAddr] dev] offset]\n"); - + "[partition] | [[[loadAddr] dev] offset]" +); #endif #else /* CONFIG_NAND_LEGACY */ @@ -941,7 +942,7 @@ U_BOOT_CMD( " offset `off' (entire device if not specified)\n" "nand bad - show bad blocks\n" "nand read.oob addr off size - read out-of-band data\n" - "nand write.oob addr off size - read out-of-band data\n" + "nand write.oob addr off size - read out-of-band data" ); int do_nandboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) @@ -1081,7 +1082,7 @@ int do_nandboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( nboot, 4, 1, do_nandboot, "boot from NAND device", - "loadAddr dev\n" + "loadAddr dev" ); #endif diff --git a/common/cmd_net.c b/common/cmd_net.c index 92bbf85d11..68183c49af 100644 --- a/common/cmd_net.c +++ b/common/cmd_net.c @@ -40,7 +40,7 @@ int do_bootp (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( bootp, 3, 1, do_bootp, "boot image via network using BOOTP/TFTP protocol", - "[loadAddress] [[hostIPaddr:]bootfilename]\n" + "[loadAddress] [[hostIPaddr:]bootfilename]" ); int do_tftpb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) @@ -51,7 +51,7 @@ int do_tftpb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( tftpboot, 3, 1, do_tftpb, "boot image via network using TFTP protocol", - "[loadAddress] [[hostIPaddr:]bootfilename]\n" + "[loadAddress] [[hostIPaddr:]bootfilename]" ); int do_rarpb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) @@ -62,7 +62,7 @@ int do_rarpb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( rarpboot, 3, 1, do_rarpb, "boot image via network using RARP/TFTP protocol", - "[loadAddress] [[hostIPaddr:]bootfilename]\n" + "[loadAddress] [[hostIPaddr:]bootfilename]" ); #if defined(CONFIG_CMD_DHCP) @@ -74,7 +74,7 @@ int do_dhcp (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( dhcp, 3, 1, do_dhcp, "boot image via network using DHCP/TFTP protocol", - "[loadAddress] [[hostIPaddr:]bootfilename]\n" + "[loadAddress] [[hostIPaddr:]bootfilename]" ); #endif @@ -87,7 +87,7 @@ int do_nfs (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( nfs, 3, 1, do_nfs, "boot image via network using NFS protocol", - "[loadAddress] [[hostIPaddr:]bootfilename]\n" + "[loadAddress] [[hostIPaddr:]bootfilename]" ); #endif @@ -269,7 +269,7 @@ int do_ping (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( ping, 2, 1, do_ping, "send ICMP ECHO_REQUEST to network host", - "pingAddress\n" + "pingAddress" ); #endif diff --git a/common/cmd_nvedit.c b/common/cmd_nvedit.c index ac9e5cfc32..2186205a1a 100644 --- a/common/cmd_nvedit.c +++ b/common/cmd_nvedit.c @@ -569,7 +569,7 @@ int do_saveenv (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( saveenv, 1, 0, do_saveenv, "save environment variables to persistent storage", - NULL + "" ); #endif @@ -602,7 +602,7 @@ U_BOOT_CMD( "print environment variables", "\n - print values of all environment variables\n" "printenv name ...\n" - " - print value of environment variable 'name'\n" + " - print value of environment variable 'name'" ); U_BOOT_CMD( @@ -611,7 +611,7 @@ U_BOOT_CMD( "name value ...\n" " - set environment variable 'name' to 'value ...'\n" "setenv name\n" - " - delete environment variable 'name'\n" + " - delete environment variable 'name'" ); #if defined(CONFIG_CMD_ASKENV) @@ -627,7 +627,7 @@ U_BOOT_CMD( " - get environment variable 'name' from stdin (max 'size' chars)\n" "askenv name [message] size\n" " - display 'message' string and get environment variable 'name'" - "from stdin (max 'size' chars)\n" + "from stdin (max 'size' chars)" ); #endif @@ -637,6 +637,6 @@ U_BOOT_CMD( run, CONFIG_SYS_MAXARGS, 1, do_run, "run commands in an environment variable", "var [...]\n" - " - run the commands in the environment variable(s) 'var'\n" + " - run the commands in the environment variable(s) 'var'" ); #endif diff --git a/common/cmd_onenand.c b/common/cmd_onenand.c index e8f06d7f43..85bd2cb68e 100644 --- a/common/cmd_onenand.c +++ b/common/cmd_onenand.c @@ -486,5 +486,5 @@ U_BOOT_CMD( "onenand test [off size] - test 'size' bytes from\n" " offset 'off' (entire device if not specified)\n" "onenand dump[.oob] off - dump page\n" - "onenand markbad off - mark bad block at offset (UNSAFE)\n" + "onenand markbad off [...] - mark bad block(s) at offset (UNSAFE)" ); diff --git a/common/cmd_otp.c b/common/cmd_otp.c index 4be43448a8..30af5a31a8 100644 --- a/common/cmd_otp.c +++ b/common/cmd_otp.c @@ -233,4 +233,5 @@ U_BOOT_CMD(otp, 7, 0, do_otp, "otp write [--force] <addr> <page> [count] [half]\n" " - write 'count' half-pages starting at 'page' (offset 'half') from 'addr'\n" "otp lock <page> <count>\n" - " - lock 'count' pages starting at 'page'\n"); + " - lock 'count' pages starting at 'page'" +); diff --git a/common/cmd_pci.c b/common/cmd_pci.c index 4a9317f16c..8a260df8bb 100644 --- a/common/cmd_pci.c +++ b/common/cmd_pci.c @@ -555,5 +555,5 @@ U_BOOT_CMD( "pci modify[.b, .w, .l] b.d.f address\n" " - modify, auto increment CFG address\n" "pci write[.b, .w, .l] b.d.f address value\n" - " - write to CFG address\n" + " - write to CFG address" ); diff --git a/common/cmd_pcmcia.c b/common/cmd_pcmcia.c index e448456971..e576b0c597 100644 --- a/common/cmd_pcmcia.c +++ b/common/cmd_pcmcia.c @@ -90,8 +90,8 @@ U_BOOT_CMD( pinit, 2, 0, do_pinit, "PCMCIA sub-system", "on - power on PCMCIA socket\n" - "pinit off - power off PCMCIA socket\n" - ); + "pinit off - power off PCMCIA socket" +); #endif diff --git a/common/cmd_portio.c b/common/cmd_portio.c index 41b1991a27..f8befee296 100644 --- a/common/cmd_portio.c +++ b/common/cmd_portio.c @@ -94,7 +94,7 @@ int do_portio_out (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( out, 3, 1, do_portio_out, "write datum to IO port", - "[.b, .w, .l] port value\n - output to IO port\n" + "[.b, .w, .l] port value\n - output to IO port" ); int do_portio_in (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) @@ -159,5 +159,5 @@ U_BOOT_CMD( in, 2, 1, do_portio_in, "read data from an IO port", "[.b, .w, .l] port\n" - " - read datum from IO port\n" + " - read datum from IO port" ); diff --git a/common/cmd_reginfo.c b/common/cmd_reginfo.c index 0e28c05b85..abb9941afb 100644 --- a/common/cmd_reginfo.c +++ b/common/cmd_reginfo.c @@ -383,5 +383,6 @@ int do_reginfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( reginfo, 2, 1, do_reginfo, "print register information", + "" ); #endif diff --git a/common/cmd_reiser.c b/common/cmd_reiser.c index 14e4bd40e3..8ede782316 100644 --- a/common/cmd_reiser.c +++ b/common/cmd_reiser.c @@ -104,7 +104,7 @@ U_BOOT_CMD( reiserls, 4, 1, do_reiserls, "list files in a directory (default /)", "<interface> <dev[:part]> [directory]\n" - " - list files from 'dev' on 'interface' in a 'directory'\n" + " - list files from 'dev' on 'interface' in a 'directory'" ); /****************************************************************************** @@ -235,5 +235,5 @@ U_BOOT_CMD( "load binary file from a Reiser filesystem", "<interface> <dev[:part]> [addr] [filename] [bytes]\n" " - load binary file 'filename' from 'dev' on 'interface'\n" - " to address 'addr' from dos filesystem\n" + " to address 'addr' from dos filesystem" ); diff --git a/common/cmd_sata.c b/common/cmd_sata.c index e84977870a..a8147e0e0f 100644 --- a/common/cmd_sata.c +++ b/common/cmd_sata.c @@ -200,4 +200,5 @@ U_BOOT_CMD( "sata device [dev] - show or set current device\n" "sata part [dev] - print partition table\n" "sata read addr blk# cnt\n" - "sata write addr blk# cnt\n"); + "sata write addr blk# cnt" +); diff --git a/common/cmd_scsi.c b/common/cmd_scsi.c index dd2c1ae73d..f89492fe22 100644 --- a/common/cmd_scsi.c +++ b/common/cmd_scsi.c @@ -623,11 +623,11 @@ U_BOOT_CMD( "scsi device [dev] - show or set current device\n" "scsi part [dev] - print partition table of one or all SCSI devices\n" "scsi read addr blk# cnt - read `cnt' blocks starting at block `blk#'\n" - " to memory address `addr'\n" + " to memory address `addr'" ); U_BOOT_CMD( scsiboot, 3, 1, do_scsiboot, "boot from SCSI device", - "loadAddr dev:part\n" + "loadAddr dev:part" ); diff --git a/common/cmd_setexpr.c b/common/cmd_setexpr.c index 9a5e720d68..f8b5d4dcfe 100644 --- a/common/cmd_setexpr.c +++ b/common/cmd_setexpr.c @@ -66,5 +66,5 @@ U_BOOT_CMD( "set environment variable as the result of eval expression", "name value1 <op> value2\n" " - set environment variable 'name' to the result of the evaluated\n" - " express specified by <op>. <op> can be &, |, ^, +, -, *, /, %\n" + " express specified by <op>. <op> can be &, |, ^, +, -, *, /, %" ); diff --git a/common/cmd_sf.c b/common/cmd_sf.c index 6a60b16805..2d463a8c97 100644 --- a/common/cmd_sf.c +++ b/common/cmd_sf.c @@ -188,4 +188,5 @@ U_BOOT_CMD( " `offset' to memory at `addr'\n" "sf write addr offset len - write `len' bytes from memory\n" " at `addr' to flash at `offset'\n" - "sf erase offset len - erase `len' bytes from `offset'\n"); + "sf erase offset len - erase `len' bytes from `offset'" +); diff --git a/common/cmd_source.c b/common/cmd_source.c index 43e1315929..965b8b1b04 100644 --- a/common/cmd_source.c +++ b/common/cmd_source.c @@ -229,10 +229,11 @@ U_BOOT_CMD( "run script from memory", "[addr]\n" "\t- run script starting at addr\n" - "\t- A valid image header must be present\n" + "\t- A valid image header must be present" #if defined(CONFIG_FIT) + "\n" "For FIT format uImage addr must include subimage\n" - "unit name in the form of addr:<subimg_uname>\n" + "unit name in the form of addr:<subimg_uname>" #endif ); @@ -251,6 +252,6 @@ do_autoscr (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( autoscr, 2, 0, do_autoscr, "DEPRECATED - use \"source\" command instead", - "DEPRECATED - use \"source\" command instead\n" + "" ); #endif diff --git a/common/cmd_spi.c b/common/cmd_spi.c index 746d14f21a..ab7aac780d 100644 --- a/common/cmd_spi.c +++ b/common/cmd_spi.c @@ -142,5 +142,5 @@ U_BOOT_CMD( "<device> <bit_len> <dout> - Send <bit_len> bits from <dout> out the SPI\n" "<device> - Identifies the chip select of the device\n" "<bit_len> - Number of bits to send (base 10)\n" - "<dout> - Hexadecimal string that gets sent\n" + "<dout> - Hexadecimal string that gets sent" ); diff --git a/common/cmd_strings.c b/common/cmd_strings.c index 4517ba29e7..3a0d8ff43a 100644 --- a/common/cmd_strings.c +++ b/common/cmd_strings.c @@ -43,4 +43,5 @@ int do_strings(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD(strings, 3, 1, do_strings, "display strings", "<addr> [byte count]\n" - " - display strings at <addr> for at least [byte count] or first double NUL\n"); + " - display strings at <addr> for at least [byte count] or first double NUL" +); diff --git a/common/cmd_ubi.c b/common/cmd_ubi.c index 64a730724c..bbca3892c9 100644 --- a/common/cmd_ubi.c +++ b/common/cmd_ubi.c @@ -609,5 +609,5 @@ U_BOOT_CMD(ubi, 6, 1, do_ubi, "[Legends]\n" " volume: charater name\n" " size: KiB, MiB, GiB, and bytes\n" - " type: s[tatic] or d[ynamic] (default=dynamic)\n" + " type: s[tatic] or d[ynamic] (default=dynamic)" ); diff --git a/common/cmd_ubifs.c b/common/cmd_ubifs.c index 4767aa4b60..d9f60d51ed 100644 --- a/common/cmd_ubifs.c +++ b/common/cmd_ubifs.c @@ -119,14 +119,17 @@ int do_ubifs_load(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( ubifsmount, 2, 0, do_ubifs_mount, "mount UBIFS volume", - "\n"); + "" +); U_BOOT_CMD(ubifsls, 2, 0, do_ubifs_ls, - "list files in a directory", - "[directory]\n" - " - list files in a 'directory' (default '/')\n"); + "list files in a directory", + "[directory]\n" + " - list files in a 'directory' (default '/')" +); U_BOOT_CMD(ubifsload, 4, 0, do_ubifs_load, - "load file from an UBIFS filesystem", - "<addr> <filename> [bytes]\n" - " - load file 'filename' to address 'addr'\n"); + "load file from an UBIFS filesystem", + "<addr> <filename> [bytes]\n" + " - load file 'filename' to address 'addr'" +); diff --git a/common/cmd_universe.c b/common/cmd_universe.c index bfb91b58c6..0a6d722a0e 100644 --- a/common/cmd_universe.c +++ b/common/cmd_universe.c @@ -382,5 +382,5 @@ U_BOOT_CMD( " 03 -> Configuration Space\n" " [vdw] = VMEbus Maximum Datawidth: 01 -> D8 Data Width\n" " 02 -> D16 Data Width\n" - " 03 -> D32 Data Width\n" + " 03 -> D32 Data Width" ); diff --git a/common/cmd_usb.c b/common/cmd_usb.c index a18e16e100..7b8ee6b48e 100644 --- a/common/cmd_usb.c +++ b/common/cmd_usb.c @@ -686,14 +686,14 @@ U_BOOT_CMD( "usb part [dev] - print partition table of one or all USB storage" " devices\n" "usb read addr blk# cnt - read `cnt' blocks starting at block `blk#'\n" - " to memory address `addr'\n" + " to memory address `addr'" ); U_BOOT_CMD( usbboot, 3, 1, do_usbboot, "boot from USB device", - "loadAddr dev:part\n" + "loadAddr dev:part" ); #else @@ -702,6 +702,6 @@ U_BOOT_CMD( "USB sub-system", "reset - reset (rescan) USB controller\n" "usb tree - show USB device tree\n" - "usb info [dev] - show available USB devices\n" + "usb info [dev] - show available USB devices" ); #endif diff --git a/common/cmd_vfd.c b/common/cmd_vfd.c index 84d9530aa9..9c5b0385b5 100644 --- a/common/cmd_vfd.c +++ b/common/cmd_vfd.c @@ -71,7 +71,7 @@ U_BOOT_CMD( "/N\n" " - load bitmap N to the VFDs (N is _decimal_ !!!)\n" "vfd ADDR\n" - " - load bitmap at address ADDR\n" + " - load bitmap at address ADDR" ); #endif diff --git a/common/cmd_ximg.c b/common/cmd_ximg.c index a45d2480e2..5593b2d24b 100644 --- a/common/cmd_ximg.c +++ b/common/cmd_ximg.c @@ -180,11 +180,12 @@ do_imgextract(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(imxtract, 4, 1, do_imgextract, - "extract a part of a multi-image", - "addr part [dest]\n" - " - extract <part> from legacy image at <addr> and copy to <dest>\n" + "extract a part of a multi-image", + "addr part [dest]\n" + " - extract <part> from legacy image at <addr> and copy to <dest>" #if defined(CONFIG_FIT) - "addr uname [dest]\n" - " - extract <uname> subimage from FIT image at <addr> and copy to <dest>\n" + "\n" + "addr uname [dest]\n" + " - extract <uname> subimage from FIT image at <addr> and copy to <dest>" #endif ); diff --git a/common/cmd_yaffs2.c b/common/cmd_yaffs2.c index c47ea769fe..d448d04831 100644 --- a/common/cmd_yaffs2.c +++ b/common/cmd_yaffs2.c @@ -143,71 +143,71 @@ int do_ydump (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( ymount, 3, 0, do_ymount, "mount yaffs", - "\n" + "" ); U_BOOT_CMD( yumount, 3, 0, do_yumount, "unmount yaffs", - "\n" + "" ); U_BOOT_CMD( yls, 4, 0, do_yls, "yaffs ls", - "[-l] name\n" + "[-l] name" ); U_BOOT_CMD( yrd, 2, 0, do_yrd, "read file from yaffs", - "filename\n" + "filename" ); U_BOOT_CMD( ywr, 4, 0, do_ywr, "write file to yaffs", - "filename value num_vlues\n" + "filename value num_vlues" ); U_BOOT_CMD( yrdm, 3, 0, do_yrdm, "read file to memory from yaffs", - "filename offset\n" + "filename offset" ); U_BOOT_CMD( ywrm, 4, 0, do_ywrm, "write file from memory to yaffs", - "filename offset size\n" + "filename offset size" ); U_BOOT_CMD( ymkdir, 2, 0, do_ymkdir, "YAFFS mkdir", - "dirname\n" + "dirname" ); U_BOOT_CMD( yrmdir, 2, 0, do_yrmdir, "YAFFS rmdir", - "dirname\n" + "dirname" ); U_BOOT_CMD( yrm, 2, 0, do_yrm, "YAFFS rm", - "path\n" + "path" ); U_BOOT_CMD( ymv, 4, 0, do_ymv, "YAFFS mv", - "oldPath newPath\n" + "oldPath newPath" ); U_BOOT_CMD( ydump, 2, 0, do_ydump, "YAFFS device struct", - "dirname\n" + "dirname" ); diff --git a/common/command.c b/common/command.c index 16f3afe394..b57f8dfc81 100644 --- a/common/command.c +++ b/common/command.c @@ -39,7 +39,7 @@ do_version (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( version, 1, 1, do_version, "print monitor version", - NULL + "" ); #if defined(CONFIG_CMD_ECHO) @@ -73,7 +73,7 @@ U_BOOT_CMD( echo, CONFIG_SYS_MAXARGS, 1, do_echo, "echo args to console", "[args..]\n" - " - echo args to console; \\c suppresses newline\n" + " - echo args to console; \\c suppresses newline" ); #endif @@ -204,8 +204,7 @@ do_test (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( test, CONFIG_SYS_MAXARGS, 1, do_test, "minimal test like /bin/sh", - "[args..]\n" - " - test functionality\n" + "[args..]" ); int @@ -223,7 +222,7 @@ do_exit (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( exit, 2, 1, do_exit, "exit script", - " - exit functionality\n" + "" ); @@ -314,15 +313,15 @@ U_BOOT_CMD( "'help' prints online help for the monitor commands.\n\n" "Without arguments, it prints a short usage message for all commands.\n\n" "To get detailed help information for specific commands you can type\n" - "'help' with one or more command names as arguments.\n" + "'help' with one or more command names as arguments." ); -/* This do not ust the U_BOOT_CMD macro as ? can't be used in symbol names */ +/* This does not use the U_BOOT_CMD macro as ? can't be used in symbol names */ #ifdef CONFIG_SYS_LONGHELP cmd_tbl_t __u_boot_cmd_question_mark Struct_Section = { "?", CONFIG_SYS_MAXARGS, 1, do_help, "alias for 'help'", - NULL + "" }; #else cmd_tbl_t __u_boot_cmd_question_mark Struct_Section = { diff --git a/common/hush.c b/common/hush.c index cf5782a7cd..97fd07067e 100644 --- a/common/hush.c +++ b/common/hush.c @@ -3627,7 +3627,7 @@ U_BOOT_CMD( "print local hushshell variables", "\n - print values of all hushshell variables\n" "showvar name ...\n" - " - print value of hushshell variable 'name'\n" + " - print value of hushshell variable 'name'" ); #endif diff --git a/common/lcd.c b/common/lcd.c index 41551707dd..74a5c77693 100644 --- a/common/lcd.c +++ b/common/lcd.c @@ -427,7 +427,7 @@ static int lcd_clear (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( cls, 1, 1, lcd_clear, "clear screen", - NULL + "" ); /*----------------------------------------------------------------------*/ diff --git a/cpu/arm_cortexa8/omap3/board.c b/cpu/arm_cortexa8/omap3/board.c index 51d5cf636f..6e295994ab 100644 --- a/cpu/arm_cortexa8/omap3/board.c +++ b/cpu/arm_cortexa8/omap3/board.c @@ -335,8 +335,8 @@ usage: U_BOOT_CMD( nandecc, 2, 1, do_switch_ecc, "nandecc - switch OMAP3 NAND ECC calculation algorithm\n", - "[hw/sw] - Switch between NAND hardware (hw) or software (sw) ecc algorithm\n" - ); + "[hw/sw] - Switch between NAND hardware (hw) or software (sw) ecc algorithm" +); #endif /* CONFIG_NAND_OMAP_GPMC */ diff --git a/cpu/mpc512x/iim.c b/cpu/mpc512x/iim.c index 6cdc422594..8f2eb37e17 100644 --- a/cpu/mpc512x/iim.c +++ b/cpu/mpc512x/iim.c @@ -389,6 +389,6 @@ U_BOOT_CMD( " no args for entire bank\n" "fuse prog <frow_bit> - program fuse at row <frow>, bit <_bit>\n" " <frow> is 0-31, <bit> is 0-7; eg. 13_2 \n" - " WARNING - this is permanent\n" - ); + " WARNING - this is permanent" +); #endif /* CONFIG_CMD_FUSE */ diff --git a/cpu/mpc512x/speed.c b/cpu/mpc512x/speed.c index 5992111c1d..1f90862424 100644 --- a/cpu/mpc512x/speed.c +++ b/cpu/mpc512x/speed.c @@ -138,7 +138,7 @@ int do_clocks (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD(clocks, 1, 0, do_clocks, "print clock configuration", - " clocks\n" + " clocks" ); int prt_mpc512x_clks (void) diff --git a/cpu/mpc83xx/speed.c b/cpu/mpc83xx/speed.c index 9b7e7b576e..95b558f926 100644 --- a/cpu/mpc83xx/speed.c +++ b/cpu/mpc83xx/speed.c @@ -545,5 +545,5 @@ int do_clocks (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD(clocks, 1, 0, do_clocks, "print clock configuration", - " clocks\n" + " clocks" ); diff --git a/cpu/nios/asmi.c b/cpu/nios/asmi.c index 2c2e838de8..33553b7ca6 100644 --- a/cpu/nios/asmi.c +++ b/cpu/nios/asmi.c @@ -48,7 +48,7 @@ "asmi write addr offset count\n"\ " - write count bytes to offset from addr.\n"\ "asmi verify addr offset count\n"\ - " - verify count bytes at offset from addr.\n" + " - verify count bytes at offset from addr." /*-----------------------------------------------------------------------*/ diff --git a/cpu/nios2/epcs.c b/cpu/nios2/epcs.c index 968b50f3d8..483b249cd5 100644 --- a/cpu/nios2/epcs.c +++ b/cpu/nios2/epcs.c @@ -47,7 +47,7 @@ "epcs write addr offset count\n"\ " - write count bytes to offset from addr.\n"\ "epcs verify addr offset count\n"\ - " - verify count bytes at offset from addr.\n" + " - verify count bytes at offset from addr." /*-----------------------------------------------------------------------*/ diff --git a/cpu/nios2/sysid.c b/cpu/nios2/sysid.c index 251204beb7..77bc8b5690 100644 --- a/cpu/nios2/sysid.c +++ b/cpu/nios2/sysid.c @@ -53,6 +53,6 @@ int do_sysid (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( sysid, 1, 1, do_sysid, "display Nios-II system id", - "\n - display Nios-II system id\n" + "" ); #endif /* CONFIG_SYS_NIOS_SYSID_BASE */ diff --git a/drivers/gpio/pca953x.c b/drivers/gpio/pca953x.c index 1c5e314d9d..e8273ee363 100644 --- a/drivers/gpio/pca953x.c +++ b/drivers/gpio/pca953x.c @@ -221,7 +221,7 @@ U_BOOT_CMD( "pca953x invert pin 0|1\n" " - disable/enable polarity inversion for reads\n" "pca953x intput pin\n" - " - set pin as input and read value\n" + " - set pin as input and read value" ); #endif /* CONFIG_CMD_PCA953X */ diff --git a/drivers/misc/ds4510.c b/drivers/misc/ds4510.c index 8b5fbbc456..f2510a38fd 100644 --- a/drivers/misc/ds4510.c +++ b/drivers/misc/ds4510.c @@ -404,12 +404,14 @@ U_BOOT_CMD( "ds4510 pullup pin 0|1\n" " - disable/enable pullup on specified pin\n" "ds4510 nv 0|1\n" - " - make gpio and seeprom writes volatile/non-volatile\n" + " - make gpio and seeprom writes volatile/non-volatile" #ifdef CONFIG_CMD_DS4510_RST + "\n" "ds4510 rstdelay 0-3\n" - " - set reset output delay\n" + " - set reset output delay" #endif #ifdef CONFIG_CMD_DS4510_MEM + "\n" "ds4510 eeprom read addr off cnt\n" "ds4510 eeprom write addr off cnt\n" " - read/write 'cnt' bytes at EEPROM offset 'off'\n" @@ -418,7 +420,7 @@ U_BOOT_CMD( " - read/write 'cnt' bytes at SRAM-shadowed EEPROM offset 'off'\n" "ds4510 sram read addr off cnt\n" "ds4510 sram write addr off cnt\n" - " - read/write 'cnt' bytes at SRAM offset 'off'\n" + " - read/write 'cnt' bytes at SRAM offset 'off'" #endif ); #endif /* CONFIG_CMD_DS4510 */ diff --git a/drivers/qe/qe.c b/drivers/qe/qe.c index f114fe06a4..918bfa748e 100644 --- a/drivers/qe/qe.c +++ b/drivers/qe/qe.c @@ -473,5 +473,6 @@ U_BOOT_CMD( qe, 4, 0, qe_cmd, "QUICC Engine commands", "fw <addr> [<length>] - Upload firmware binary at address <addr> to " - "the QE,\n\twith optional length <length> verification.\n" - ); + "the QE,\n" + "\twith optional length <length> verification." +); |