diff options
| -rw-r--r-- | board/sifive/fu540/Kconfig | 1 | ||||
| -rw-r--r-- | drivers/clk/sifive/Kconfig | 7 | ||||
| -rw-r--r-- | drivers/clk/sifive/Makefile | 2 | ||||
| -rw-r--r-- | drivers/clk/sifive/gemgxl-mgmt.c | 60 |
4 files changed, 0 insertions, 70 deletions
diff --git a/board/sifive/fu540/Kconfig b/board/sifive/fu540/Kconfig index 8eb5e304ab..f46437901d 100644 --- a/board/sifive/fu540/Kconfig +++ b/board/sifive/fu540/Kconfig @@ -28,7 +28,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy imply CMD_PING imply CLK_SIFIVE imply CLK_SIFIVE_FU540_PRCI - imply CLK_SIFIVE_GEMGXL_MGMT imply DOS_PARTITION imply EFI_PARTITION imply IP_DYN diff --git a/drivers/clk/sifive/Kconfig b/drivers/clk/sifive/Kconfig index d90be1943f..c4d0a1f9b1 100644 --- a/drivers/clk/sifive/Kconfig +++ b/drivers/clk/sifive/Kconfig @@ -14,10 +14,3 @@ config CLK_SIFIVE_FU540_PRCI Supports the Power Reset Clock interface (PRCI) IP block found in FU540 SoCs. If this kernel is meant to run on a SiFive FU540 SoC, enable this driver. - -config CLK_SIFIVE_GEMGXL_MGMT - bool "GEMGXL management for SiFive FU540 SoCs" - depends on CLK_SIFIVE - help - Supports the GEMGXL management IP block found in FU540 SoCs to - control GEM TX clock operation mode for 10/100/1000 Mbps. diff --git a/drivers/clk/sifive/Makefile b/drivers/clk/sifive/Makefile index 0813360ca7..b224279afb 100644 --- a/drivers/clk/sifive/Makefile +++ b/drivers/clk/sifive/Makefile @@ -1,5 +1,3 @@ # SPDX-License-Identifier: GPL-2.0+ obj-$(CONFIG_CLK_SIFIVE_FU540_PRCI) += fu540-prci.o - -obj-$(CONFIG_CLK_SIFIVE_GEMGXL_MGMT) += gemgxl-mgmt.o diff --git a/drivers/clk/sifive/gemgxl-mgmt.c b/drivers/clk/sifive/gemgxl-mgmt.c deleted file mode 100644 index eb37416b5e..0000000000 --- a/drivers/clk/sifive/gemgxl-mgmt.c +++ /dev/null @@ -1,60 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2019, Bin Meng <bmeng.cn@gmail.com> - */ - -#include <common.h> -#include <clk-uclass.h> -#include <dm.h> -#include <asm/io.h> - -struct gemgxl_mgmt_regs { - __u32 tx_clk_sel; -}; - -struct gemgxl_mgmt_platdata { - struct gemgxl_mgmt_regs *regs; -}; - -static int gemgxl_mgmt_ofdata_to_platdata(struct udevice *dev) -{ - struct gemgxl_mgmt_platdata *plat = dev_get_platdata(dev); - - plat->regs = (struct gemgxl_mgmt_regs *)dev_read_addr(dev); - - return 0; -} - -static ulong gemgxl_mgmt_set_rate(struct clk *clk, ulong rate) -{ - struct gemgxl_mgmt_platdata *plat = dev_get_platdata(clk->dev); - - /* - * GEMGXL TX clock operation mode: - * - * 0 = GMII mode. Use 125 MHz gemgxlclk from PRCI in TX logic - * and output clock on GMII output signal GTX_CLK - * 1 = MII mode. Use MII input signal TX_CLK in TX logic - */ - writel(rate != 125000000, &plat->regs->tx_clk_sel); - - return 0; -} - -const struct clk_ops gemgxl_mgmt_ops = { - .set_rate = gemgxl_mgmt_set_rate, -}; - -static const struct udevice_id gemgxl_mgmt_match[] = { - { .compatible = "sifive,cadencegemgxlmgmt0", }, - { /* sentinel */ } -}; - -U_BOOT_DRIVER(sifive_gemgxl_mgmt) = { - .name = "sifive-gemgxl-mgmt", - .id = UCLASS_CLK, - .of_match = gemgxl_mgmt_match, - .ofdata_to_platdata = gemgxl_mgmt_ofdata_to_platdata, - .platdata_auto_alloc_size = sizeof(struct gemgxl_mgmt_platdata), - .ops = &gemgxl_mgmt_ops, -}; |