diff options
| -rw-r--r-- | CHANGELOG | 13 | ||||
| -rw-r--r-- | README | 10 | ||||
| -rw-r--r-- | board/cray/L1/Makefile | 12 | ||||
| -rw-r--r-- | board/fads/fads.c | 1 | ||||
| -rw-r--r-- | board/fads/flash.c | 10 | ||||
| -rw-r--r-- | board/mpc8266ads/config.mk | 2 | ||||
| -rw-r--r-- | board/mpc8266ads/flash.c | 6 | ||||
| -rw-r--r-- | board/mpc8266ads/mpc8266ads.c | 47 | ||||
| -rw-r--r-- | common/cmd_pci.c | 36 | ||||
| -rw-r--r-- | cpu/74xx_7xx/start.S | 4 | ||||
| -rw-r--r-- | cpu/mpc5xx/start.S | 4 | ||||
| -rw-r--r-- | cpu/mpc824x/start.S | 4 | ||||
| -rw-r--r-- | cpu/mpc8260/pci.c | 219 | ||||
| -rw-r--r-- | cpu/mpc8260/start.S | 4 | ||||
| -rw-r--r-- | cpu/mpc8xx/start.S | 4 | ||||
| -rw-r--r-- | cpu/ppc4xx/spd_sdram.c | 2 | ||||
| -rw-r--r-- | cpu/ppc4xx/start.S | 4 | ||||
| -rw-r--r-- | drivers/pci_indirect.c | 2 | ||||
| -rw-r--r-- | include/configs/FADS860T.h | 4 | ||||
| -rw-r--r-- | include/configs/MPC8260ADS.h | 2 | ||||
| -rw-r--r-- | include/configs/MPC8266ADS.h | 190 | ||||
| -rw-r--r-- | include/configs/PM826.h | 10 | ||||
| -rw-r--r-- | include/configs/WALNUT405.h | 2 | ||||
| -rw-r--r-- | include/configs/atc.h | 1 | ||||
| -rw-r--r-- | include/flash.h | 18 | ||||
| -rw-r--r-- | lib_ppc/board.c | 1 |
26 files changed, 482 insertions, 130 deletions
@@ -2,6 +2,19 @@ Changes since U-Boot 0.3.1: ====================================================================== +* Patch by Dave Ellis, 22 May 2003: + Fix problem with only partially cleared .bss segment + +* Patch by Rune Torgersen, 12 May 2003: + get PCI to work on a MPC8266ADS board; incorporate change to + cpu/mpc8260/pci.c to enable overrides of PCI memory parameters + +* Patch by Nye Liu, 1 May 2003: + minor patches for the FADS8xx + +* Patch by Thomas Schäfer, 28 Apr 2003: + Fix SPD handling for 256 ECC DIMM on Walnut + * Add support for arbitrary bitmaps for TRAB's VFD command; allow to pass boot bitmap addresses in environment variables; allow for zero boot delay @@ -1710,6 +1710,16 @@ Low Level (hardware related) configuration options: #define'd default value in commproc.h resp. cpm_8260.h. +- CFG_PCI_SLV_MEM_LOCAL, CFG_PCI_SLV_MEM_BUS, CFG_PICMR0_MASK_ATTRIB, + CFG_PCI_MSTR0_LOCAL, CFG_PCIMSK0_MASK, CFG_PCI_MSTR1_LOCAL, + CFG_PCIMSK1_MASK, CFG_PCI_MSTR_MEM_LOCAL, CFG_PCI_MSTR_MEM_BUS, + CFG_CPU_PCI_MEM_START, CFG_PCI_MSTR_MEM_SIZE, CFG_POCMR0_MASK_ATTRIB, + CFG_PCI_MSTR_MEMIO_LOCAL, CFG_PCI_MSTR_MEMIO_BUS, CPU_PCI_MEMIO_START, + CFG_PCI_MSTR_MEMIO_SIZE, CFG_POCMR1_MASK_ATTRIB, CFG_PCI_MSTR_IO_LOCAL, + CFG_PCI_MSTR_IO_BUS, CFG_CPU_PCI_IO_START, CFG_PCI_MSTR_IO_SIZE, + CFG_POCMR2_MASK_ATTRIB: (MPC826x only) + Overrides the default PCI memory map in cpu/mpc8260/pci.c if set. + Building the Software: ====================== diff --git a/board/cray/L1/Makefile b/board/cray/L1/Makefile index 4c09eddd91..e7dc0a8df3 100644 --- a/board/cray/L1/Makefile +++ b/board/cray/L1/Makefile @@ -25,21 +25,21 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a -OBJS = $(BOARD).o flash.o bootscript.o +OBJS = $(BOARD).o flash.o SOBJS = init.o -$(LIB): $(OBJS) $(SOBJS) +# HACK: depend needs bootscript.c, which needs tools/mkimage, which is not +# built in the depend stage. So... put bootscript.o here, not in OBJS +$(LIB): $(OBJS) $(SOBJS) bootscript.o $(AR) crv $@ $^ clean: - rm -f $(SOBJS) $(OBJS) bootscript.c bootscript.image + rm -f $(SOBJS) $(OBJS) bootscript.c bootscript.image bootscript.o distclean: clean rm -f $(LIB) core *.bak .depend -$(BOARD).o: $(BOARD).c bootscript.o - -bootscript.o: bootscript.c +$(BOARD).o : $(BOARD).c bootscript.o bootscript.c: bootscript.image od -t x1 -v -A x $^ | awk -f x2c.awk > $@ diff --git a/board/fads/fads.c b/board/fads/fads.c index 3b97f51f23..8714689021 100644 --- a/board/fads/fads.c +++ b/board/fads/fads.c @@ -208,6 +208,7 @@ int checkboard (void) case 0x22 : case 0x23 : case 0x24 : + case 0x2a : case 0x3f : puts ("FADS"); break; diff --git a/board/fads/flash.c b/board/fads/flash.c index 50b496ed97..22a7c410ce 100644 --- a/board/fads/flash.c +++ b/board/fads/flash.c @@ -147,7 +147,7 @@ static void flash_get_offsets (ulong base, flash_info_t *info) int i; /* set up sector start address table */ - if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) { + if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040 || (info->flash_id & FLASH_TYPEMASK) == FLASH_AM080 ) { /* set sector offsets for uniform sector type */ for (i = 0; i < info->sector_count; i++) { info->start[i] = base + (i * 0x00040000); @@ -179,6 +179,8 @@ void flash_print_info (flash_info_t *info) { case FLASH_AM040: printf ("29F040 or 29LV040 (4 Mbit, uniform sectors)\n"); break; + case FLASH_AM080: printf ("29F080 or 29LV080 (8 Mbit, uniform sectors)\n"); + break; case FLASH_AM400B: printf ("AM29LV400B (4 Mbit, bottom boot sect)\n"); break; case FLASH_AM400T: printf ("AM29LV400T (4 Mbit, top boot sector)\n"); @@ -278,6 +280,12 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info) info->size = 0x00200000; break; /* => 2 MB */ + case AMD_ID_F080B: + info->flash_id += FLASH_AM080; + info->sector_count =16; + info->size = 0x00400000; + break; /* => 4 MB */ + case AMD_ID_LV400T: info->flash_id += FLASH_AM400T; info->sector_count = 11; diff --git a/board/mpc8266ads/config.mk b/board/mpc8266ads/config.mk index 9d55598264..ecc2a7db61 100644 --- a/board/mpc8266ads/config.mk +++ b/board/mpc8266ads/config.mk @@ -27,6 +27,6 @@ # mpc8260ads board # -TEXT_BASE = 0xfff00000 +TEXT_BASE = 0xfe000000 PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board diff --git a/board/mpc8266ads/flash.c b/board/mpc8266ads/flash.c index 5ec6e33cfc..b876d1cddd 100644 --- a/board/mpc8266ads/flash.c +++ b/board/mpc8266ads/flash.c @@ -55,7 +55,7 @@ static int clear_block_lock_bit(vu_long * addr); unsigned long flash_init (void) { -#ifndef CONFIG_MPC8260ADS +#ifndef CONFIG_MPC8266ADS volatile immap_t *immap = (immap_t *)CFG_IMMR; volatile memctl8xx_t *memctl = &immap->im_memctl; volatile ip860_bcsr_t *bcsr = (ip860_bcsr_t *)BCSR_BASE; @@ -66,7 +66,7 @@ unsigned long flash_init (void) /* Init: enable write, * or we cannot even write flash commands */ -#ifndef CONFIG_MPC8260ADS +#ifndef CONFIG_MPC8266ADS bcsr->bd_ctrl |= BD_CTRL_FLWE; #endif @@ -86,7 +86,7 @@ unsigned long flash_init (void) size, size<<20); } -#ifndef CONFIG_MPC8260ADS +#ifndef CONFIG_MPC8266ADS /* Remap FLASH according to real size */ memctl->memc_or1 = CFG_OR_TIMING_FLASH | (-size & 0xFFFF8000); memctl->memc_br1 = (CFG_FLASH_BASE & BR_BA_MSK) | diff --git a/board/mpc8266ads/mpc8266ads.c b/board/mpc8266ads/mpc8266ads.c index 796b37de1e..3e34828b7d 100644 --- a/board/mpc8266ads/mpc8266ads.c +++ b/board/mpc8266ads/mpc8266ads.c @@ -32,6 +32,7 @@ #include <ioports.h> #include <i2c.h> #include <mpc8260.h> +#include <pci.h> /* * PBI Page Based Interleaving @@ -155,8 +156,8 @@ const iop_conf_t iop_conf_tab[4][32] = { /* PC13 */ { 0, 0, 0, 1, 0, 0 }, /* PC13 */ /* PC12 */ { 0, 1, 0, 1, 0, 0 }, /* PC12 */ /* PC11 */ { 0, 0, 0, 1, 0, 0 }, /* LXT971 transmit control */ - /* PC10 */ { 1, 1, 0, 0, 0, 0 }, /* LXT970 FETHMDC */ - /* PC9 */ { 1, 1, 0, 0, 0, 0 }, /* LXT970 FETHMDIO */ + /* PC10 */ { 1, 0, 0, 1, 0, 0 }, /* LXT970 FETHMDC */ + /* PC9 */ { 1, 0, 0, 0, 0, 0 }, /* LXT970 FETHMDIO */ /* PC8 */ { 0, 0, 0, 1, 0, 0 }, /* PC8 */ /* PC7 */ { 0, 0, 0, 1, 0, 0 }, /* PC7 */ /* PC6 */ { 0, 0, 0, 1, 0, 0 }, /* PC6 */ @@ -216,6 +217,11 @@ typedef struct bscr_ { unsigned long bcsr7; } bcsr_t; +typedef struct pci_ic_s { + unsigned long pci_int_stat; + unsigned long pci_int_mask; +} pci_ic_t; + void reset_phy(void) { volatile bcsr_t *bcsr = (bcsr_t *)CFG_BCSR; @@ -229,8 +235,13 @@ void reset_phy(void) int board_pre_init (void) { volatile bcsr_t *bcsr = (bcsr_t *)CFG_BCSR; - bcsr->bcsr1 = ~FETHIEN & ~RS232EN_1; + volatile pci_ic_t *pci_ic = (pci_ic_t *) CFG_PCI_INT; + + bcsr->bcsr1 = ~FETHIEN & ~RS232EN_1 & ~RS232EN_2; + /* mask all PCI interrupts */ + pci_ic->pci_int_mask |= 0xfff00000; + return 0; } @@ -250,7 +261,7 @@ long int initdram(int board_type) uint psdmr = CFG_PSDMR; int i; - uint psrt = 14; /* for no SPD */ + uint psrt = 0x21; /* for no SPD */ uint chipselects = 1; /* for no SPD */ uint sdram_size = CFG_SDRAM_SIZE * 1024 * 1024; /* for no SPD */ uint or = CFG_OR2_PRELIM; /* for no SPD */ @@ -270,7 +281,7 @@ long int initdram(int board_type) int j; /* Keep the compiler from complaining about potentially uninitialized vars */ - data_width = chipselects = rows = banks = cols = caslatency = psrt = 0; + data_width = rows = banks = cols = caslatency = 0; /* * Read the SDRAM SPD EEPROM via I2C. @@ -294,17 +305,18 @@ long int initdram(int board_type) { /* * Refresh rate: this assumes the prescaler is set to - * approximately 1uSec per tick. + * approximately 0.39uSec per tick and the target refresh period + * is about 85% of maximum. */ switch(data & 0x7F) { default: - case 0: psrt = 16; /* 15.625uS */ break; - case 1: psrt = 2; /* 3.9uS */ break; - case 2: psrt = 6; /* 7.8uS */ break; - case 3: psrt = 29; /* 31.3uS */ break; - case 4: psrt = 60; /* 62.5uS */ break; - case 5: psrt = 120; /* 125uS */ break; + case 0: psrt = 0x21; /* 15.625uS */ break; + case 1: psrt = 0x07; /* 3.9uS */ break; + case 2: psrt = 0x0F; /* 7.8uS */ break; + case 3: psrt = 0x43; /* 31.3uS */ break; + case 4: psrt = 0x87; /* 62.5uS */ break; + case 5: psrt = 0xFF; /* 125uS */ break; } } else if(j == 17) banks = data; @@ -563,3 +575,14 @@ long int initdram(int board_type) return (sdram_size * chipselects); /*return (16 * 1024 * 1024);*/ } + +#ifdef CONFIG_PCI +struct pci_controller hose; + +extern void pci_mpc8250_init(struct pci_controller *); + +void pci_init_board(void) +{ + pci_mpc8250_init(&hose); +} +#endif diff --git a/common/cmd_pci.c b/common/cmd_pci.c index a26deddcd3..ca712ce725 100644 --- a/common/cmd_pci.c +++ b/common/cmd_pci.c @@ -113,7 +113,7 @@ void pciinfo(int BusNum, int ShortPCIListing) } } -char* pci_classes_str(u8 class) +static char *pci_classes_str(u8 class) { switch (class) { case PCI_CLASS_NOT_DEFINED: @@ -123,55 +123,55 @@ char* pci_classes_str(u8 class) return "Mass storage controller"; break; case PCI_BASE_CLASS_NETWORK: - return "Network controller "; + return "Network controller"; break; case PCI_BASE_CLASS_DISPLAY: - return "Display controller "; + return "Display controller"; break; case PCI_BASE_CLASS_MULTIMEDIA: - return "Multimedia device "; + return "Multimedia device"; break; case PCI_BASE_CLASS_MEMORY: - return "Memory controller "; + return "Memory controller"; break; case PCI_BASE_CLASS_BRIDGE: - return "Bridge device "; + return "Bridge device"; break; case PCI_BASE_CLASS_COMMUNICATION: return "Simple comm. controller"; break; case PCI_BASE_CLASS_SYSTEM: - return "Base system peripheral "; + return "Base system peripheral"; break; case PCI_BASE_CLASS_INPUT: - return "Input device "; + return "Input device"; break; case PCI_BASE_CLASS_DOCKING: - return "Docking station "; + return "Docking station"; break; case PCI_BASE_CLASS_PROCESSOR: - return "Processor "; + return "Processor"; break; case PCI_BASE_CLASS_SERIAL: - return "Serial bus controller "; + return "Serial bus controller"; break; case PCI_BASE_CLASS_INTELLIGENT: - return "Intelligent controller "; + return "Intelligent controller"; break; case PCI_BASE_CLASS_SATELLITE: - return "Satellite controller "; + return "Satellite controller"; break; case PCI_BASE_CLASS_CRYPT: - return "Cryptographic device "; + return "Cryptographic device"; break; case PCI_BASE_CLASS_SIGNAL_PROCESSING: - return "DSP "; + return "DSP"; break; case PCI_CLASS_OTHERS: - return "Does not fit any class "; + return "Does not fit any class"; break; default: - return "??? "; + return "???"; break; }; } @@ -197,7 +197,7 @@ void pci_header_show_brief(pci_dev_t dev) pci_read_config_byte(dev, PCI_CLASS_CODE, &class); pci_read_config_byte(dev, PCI_CLASS_SUB_CODE, &subclass); - printf("0x%.4x 0x%.4x %s 0x%.2x\n", + printf("0x%.4x 0x%.4x %-23s 0x%.2x\n", vendor, device, pci_classes_str(class), subclass); } diff --git a/cpu/74xx_7xx/start.S b/cpu/74xx_7xx/start.S index 0d63144356..96559c2e31 100644 --- a/cpu/74xx_7xx/start.S +++ b/cpu/74xx_7xx/start.S @@ -69,7 +69,7 @@ GOT_ENTRY(transfer_to_handler) GOT_ENTRY(_end) - GOT_ENTRY(.bss) + GOT_ENTRY(__bss_start) END_GOT /* @@ -716,7 +716,7 @@ in_ram: /* * Now clear BSS segment */ - lwz r3,GOT(.bss) + lwz r3,GOT(__bss_start) lwz r4,GOT(_end) cmplw 0, r3, r4 diff --git a/cpu/mpc5xx/start.S b/cpu/mpc5xx/start.S index d17fe92720..d8a8bec1e5 100644 --- a/cpu/mpc5xx/start.S +++ b/cpu/mpc5xx/start.S @@ -67,7 +67,7 @@ GOT_ENTRY(transfer_to_handler) GOT_ENTRY(_end) - GOT_ENTRY(.bss) + GOT_ENTRY(__bss_start) END_GOT /* @@ -527,7 +527,7 @@ clear_bss: /* * Now clear BSS segment */ - lwz r3,GOT(.bss) + lwz r3,GOT(__bss_start) lwz r4,GOT(_end) cmplw 0, r3, r4 beq 6f diff --git a/cpu/mpc824x/start.S b/cpu/mpc824x/start.S index 7716240edb..855b81f7bb 100644 --- a/cpu/mpc824x/start.S +++ b/cpu/mpc824x/start.S @@ -74,7 +74,7 @@ GOT_ENTRY(transfer_to_handler) GOT_ENTRY(_end) - GOT_ENTRY(.bss) + GOT_ENTRY(__bss_start) #if defined(CONFIG_FADS) GOT_ENTRY(environment) #endif @@ -665,7 +665,7 @@ clear_bss: /* * Now clear BSS segment */ - lwz r3,GOT(.bss) + lwz r3,GOT(__bss_start) lwz r4,GOT(_end) cmplw 0, r3, r4 diff --git a/cpu/mpc8260/pci.c b/cpu/mpc8260/pci.c index b7a04d52b2..47c5dae18f 100644 --- a/cpu/mpc8260/pci.c +++ b/cpu/mpc8260/pci.c @@ -26,22 +26,30 @@ #ifdef CONFIG_PCI #include <pci.h> +#include <mpc8260.h> #include <asm/m8260_pci.h> /* * Local->PCI map (from CPU) controlled by * MPC826x master window * - * 0x80000000 - 0xBFFFFFFF Total CPU2PCI space PCIBR0 + * 0x80000000 - 0xBFFFFFFF CPU2PCI space PCIBR0 + * 0xF4000000 - 0xF7FFFFFF CPU2PCI space PCIBR1 * - * 0x80000000 - 0x8FFFFFFF PCI Mem with prefetch (Outbound ATU #1) - * 0x90000000 - 0x9FFFFFFF PCI Mem w/o prefetch (Outbound ATU #2) - * 0xA0000000 - 0xAFFFFFFF 32-bit PCI IO (Outbound ATU #3) + * 0x80000000 - 0x9FFFFFFF 0x80000000 - 0x9FFFFFFF (Outbound ATU #1) + * PCI Mem with prefetch + * + * 0xA0000000 - 0xBFFFFFFF 0xA0000000 - 0xBFFFFFFF (Outbound ATU #2) + * PCI Mem w/o prefetch + * + * 0xF4000000 - 0xF7FFFFFF 0x00000000 - 0x03FFFFFF (Outbound ATU #3) + * 32-bit PCI IO * * PCI->Local map (from PCI) * MPC826x slave window controlled by * - * 0x00000000 - 0x07FFFFFF MPC826x local memory (Inbound ATU #1) + * 0x00000000 - 0x1FFFFFFF 0x00000000 - 0x1FFFFFFF (Inbound ATU #1) + * MPC826x local memory */ /* @@ -49,20 +57,57 @@ * This window is set up using the first set of Inbound ATU registers */ -#define PCI_SLV_MEM_LOCAL CFG_SDRAM_BASE /* Local base */ -#define PCI_SLV_MEM_BUS 0x00000000 /* PCI base */ +#ifndef CFG_PCI_SLV_MEM_LOCAL +#define PCI_SLV_MEM_LOCAL CFG_SDRAM_BASE /* Local base */ +#else +#define PCI_SLV_MEM_LOCAL CFG_PCI_SLV_MEM_LOCAL +#endif + +#ifndef CFG_PCI_SLV_MEM_BUS +#define PCI_SLV_MEM_BUS 0x00000000 /* PCI base */ +#else +#define PCI_SLV_MEM_BUS CFG_PCI_SLV_MEM_BUS +#endif + +#ifndef CFG_PICMR0_MASK_ATTRIB #define PICMR0_MASK_ATTRIB (PICMR_MASK_512MB | PICMR_ENABLE | \ PICMR_PREFETCH_EN) +#else +#define PICMR0_MASK_ATTRIB CFG_PICMR0_MASK_ATTRIB +#endif /* - * This is the window that allows the CPU to access PCI address space. - * It will be setup with the SIU PCIBR0 register. All three PCI master - * windows, which allow the CPU to access PCI prefetch, non prefetch, - * and IO space (see below), must all fit within this window. + * These are the windows that allow the CPU to access PCI address space. + * All three PCI master windows, which allow the CPU to access PCI + * prefetch, non prefetch, and IO space (see below), must all fit within + * these windows. */ -#define PCI_MSTR_LOCAL 0x80000000 /* Local base */ +/* PCIBR0 */ +#ifndef CFG_PCI_MSTR0_LOCAL +#define PCI_MSTR0_LOCAL 0x80000000 /* Local base */ +#else +#define PCI_MSTR0_LOCAL CFG_PCI_MSTR0_LOCAL +#endif + +#ifndef CFG_PCIMSK0_MASK #define PCIMSK0_MASK PCIMSK_1GB /* Size of window */ +#else +#define PCIMSK0_MASK CFG_PCIMSK0_MASK +#endif + +/* PCIBR1 */ +#ifndef CFG_PCI_MSTR1_LOCAL +#define PCI_MSTR1_LOCAL 0xF4000000 /* Local base */ +#else +#define PCI_MSTR1_LOCAL CFG_PCI_MSTR1_LOCAL +#endif + +#ifndef CFG_PCIMSK1_MASK +#define PCIMSK1_MASK PCIMSK_64MB /* Size of window */ +#else +#define PCIMSK1_MASK CFG_PCIMSK1_MASK +#endif /* * Master window that allows the CPU to access PCI Memory (prefetch). @@ -70,11 +115,35 @@ * in the bridge. */ -#define PCI_MSTR_MEM_LOCAL 0x80000000 /* Local base */ -#define PCI_MSTR_MEM_BUS 0x80000000 /* PCI base */ -#define CPU_PCI_MEM_START PCI_MSTR_MEM_LOCAL -#define PCI_MSTR_MEM_SIZE 0x10000000 /* 256MB */ +#ifndef CFG_PCI_MSTR_MEM_LOCAL +#define PCI_MSTR_MEM_LOCAL 0x80000000 /* Local base */ +#else +#define PCI_MSTR_MEM_LOCAL CFG_PCI_MSTR_MEM_LOCAL +#endif + +#ifndef CFG_PCI_MSTR_MEM_BUS +#define PCI_MSTR_MEM_BUS 0x80000000 /* PCI base */ +#else +#define PCI_MSTR_MEM_BUS CFG_PCI_MSTR_MEM_BUS +#endif + +#ifndef CFG_CPU_PCI_MEM_START +#define CPU_PCI_MEM_START PCI_MSTR_MEM_LOCAL +#else +#define CPU_PCI_MEM_START CFG_CPU_PCI_MEM_START +#endif + +#ifndef CFG_PCI_MSTR_MEM_SIZE +#define PCI_MSTR_MEM_SIZE 0x10000000 /* 256MB */ +#else +#define PCI_MSTR_MEM_SIZE CFG_PCI_MSTR_MEM_SIZE +#endif + +#ifndef CFG_POCMR0_MASK_ATTRIB #define POCMR0_MASK_ATTRIB (POCMR_MASK_256MB | POCMR_ENABLE | POCMR_PREFETCH_EN) +#else +#define POCMR0_MASK_ATTRIB CFG_POCMR0_MASK_ATTRIB +#endif /* * Master window that allows the CPU to access PCI Memory (non-prefetch). @@ -82,11 +151,35 @@ * in the bridge. */ -#define PCI_MSTR_MEMIO_LOCAL 0x90000000 /* Local base */ -#define PCI_MSTR_MEMIO_BUS 0x90000000 /* PCI base */ -#define CPU_PCI_MEMIO_START PCI_MSTR_MEMIO_LOCAL -#define PCI_MSTR_MEMIO_SIZE 0x10000000 /* 256MB */ -#define POCMR1_MASK_ATTRIB (POCMR_MASK_256MB | POCMR_ENABLE) +#ifndef CFG_PCI_MSTR_MEMIO_LOCAL +#define PCI_MSTR_MEMIO_LOCAL 0x90000000 /* Local base */ +#else +#define PCI_MSTR_MEMIO_LOCAL CFG_PCI_MSTR_MEMIO_LOCAL +#endif + +#ifndef CFG_PCI_MSTR_MEMIO_BUS +#define PCI_MSTR_MEMIO_BUS 0x90000000 /* PCI base */ +#else +#define PCI_MSTR_MEMIO_BUS CFG_PCI_MSTR_MEMIO_BUS +#endif + +#ifndef CFG_CPU_PCI_MEMIO_START +#define CPU_PCI_MEMIO_START PCI_MSTR_MEMIO_LOCAL +#else +#define CPU_PCI_MEMIO_START CFG_CPU_PCI_MEMIO_START +#endif + +#ifndef CFG_PCI_MSTR_MEMIO_SIZE +#define PCI_MSTR_MEMIO_SIZE 0x20000000 /* 512MB */ +#else +#define PCI_MSTR_MEMIO_SIZE CFG_PCI_MSTR_MEMIO_SIZE +#endif + +#ifndef CFG_POCMR1_MASK_ATTRIB +#define POCMR1_MASK_ATTRIB (POCMR_MASK_512MB | POCMR_ENABLE) +#else +#define POCMR1_MASK_ATTRIB CFG_POCMR1_MASK_ATTRIB +#endif /* * Master window that allows the CPU to access PCI IO space. @@ -94,15 +187,35 @@ * in the bridge. */ -#define PCI_MSTR_IO_LOCAL 0xA0000000 /* Local base */ -#ifdef CONFIG_ATC -#define PCI_MSTR_IO_BUS 0x00000000 /* PCI base */ -#else -#define PCI_MSTR_IO_BUS 0xA0000000 /* PCI base */ +#ifndef CFG_PCI_MSTR_IO_LOCAL +#define PCI_MSTR_IO_LOCAL 0xA0000000 /* Local base */ +#else +#define PCI_MSTR_IO_LOCAL CFG_PCI_MSTR_IO_LOCAL +#endif + +#ifndef CFG_PCI_MSTR_IO_BUS +#define PCI_MSTR_IO_BUS 0xA0000000 /* PCI base */ +#else +#define PCI_MSTR_IO_BUS CFG_PCI_MSTR_IO_BUS +#endif + +#ifndef CFG_CPU_PCI_IO_START +#define CPU_PCI_IO_START PCI_MSTR_IO_LOCAL +#else +#define CPU_PCI_IO_START CFG_CPU_PCI_IO_START +#endif + +#ifndef CFG_PCI_MSTR_IO_SIZE +#define PCI_MSTR_IO_SIZE 0x10000000 /* 256MB */ +#else +#define PCI_MSTR_IO_SIZE CFG_PCI_MSTR_IO_SIZE #endif -#define CPU_PCI_IO_START PCI_MSTR_IO_LOCAL -#define PCI_MSTR_IO_SIZE 0x10000000 /* 256MB */ + +#ifndef CFG_POCMR2_MASK_ATTRIB #define POCMR2_MASK_ATTRIB (POCMR_MASK_256MB | POCMR_ENABLE | POCMR_PCI_IO) +#else +#define POCMR2_MASK_ATTRIB CFG_POCMR2_MASK_ATTRIB +#endif /* PCI bus configuration registers. */ @@ -117,6 +230,9 @@ static inline void pci_outl(u32 addr, u32 data) void pci_mpc8250_init(struct pci_controller *hose) { +#ifdef CONFIG_MPC8266ADS + DECLARE_GLOBAL_DATA_PTR; +#endif u16 tempShort; u32 immr_addr = CFG_IMMR; volatile immap_t *immap = (immap_t *) CFG_IMMR; @@ -125,11 +241,19 @@ void pci_mpc8250_init(struct pci_controller *hose) pci_setup_indirect(hose, CFG_IMMR + PCI_CFG_ADDR_REG, CFG_IMMR + PCI_CFG_DATA_REG); + /* + * Setting required to enable local bus for PCI (SIUMCR [LBPC]). + */ +#ifdef CONFIG_MPC8266ADS + immap->im_siu_conf.sc_siumcr = (immap->im_siu_conf.sc_siumcr & ~SIUMCR_LBPC11) + | SIUMCR_LBPC01; +#else /* * Setting required to enable IRQ1-IRQ7 (SIUMCR [DPPC]), * and local bus for PCI (SIUMCR [LBPC]). */ immap->im_siu_conf.sc_siumcr = 0x00640000; +#endif /* Make PCI lowest priority */ /* Each 4 bits is a device bus request and the MS 4bits @@ -153,18 +277,33 @@ void pci_mpc8250_init(struct pci_controller *hose) immap->im_siu_conf.sc_ppc_acr = 0x6; /* - * Set up master window that allows the CPU to access PCI space. This - * window is set up using the first SIU PCIBR registers. + * Set up master windows that allow the CPU to access PCI space. These + * windows are set up using the two SIU PCIBR registers. */ *(volatile unsigned long*)(immr_addr + M8265_PCIMSK0) = PCIMSK0_MASK; *(volatile unsigned long*)(immr_addr + M8265_PCIBR0) = - PCI_MSTR_LOCAL | PCIBR_ENABLE; + PCI_MSTR0_LOCAL | PCIBR_ENABLE; + +#ifdef CONFIG_MPC8266ADS + *(volatile unsigned long*)(immr_addr + M8265_PCIMSK1) = PCIMSK1_MASK; + *(volatile unsigned long*)(immr_addr + M8265_PCIBR1) = + PCI_MSTR1_LOCAL | PCIBR_ENABLE; +#endif /* Release PCI RST (by default the PCI RST signal is held low) */ pci_outl (immr_addr | PCI_GCR_REG, PCIGCR_PCI_BUS_EN); /* give it some time */ - udelay(1000); + { +#ifdef CONFIG_MPC8266ADS + /* Give the PCI cards more time to initialize before query + This might be good for other boards also + */ + int i; + for (i = 0; i < 1000; ++i) +#endif + udelay(1000); + } /* * Set up master window that allows the CPU to access PCI Memory (prefetch) @@ -218,18 +357,34 @@ void pci_mpc8250_init(struct pci_controller *hose) hose->last_busno = 0xff; /* System memory space */ +#ifdef CONFIG_MPC8266ADS + pci_set_region(hose->regions + 0, + PCI_SLV_MEM_BUS, + PCI_SLV_MEM_LOCAL, + gd->ram_size, + PCI_REGION_MEM | PCI_REGION_MEMORY); +#else pci_set_region(hose->regions + 0, CFG_SDRAM_BASE, CFG_SDRAM_BASE, 0x4000000, PCI_REGION_MEM | PCI_REGION_MEMORY); +#endif /* PCI memory space */ +#ifdef CONFIG_MPC8266ADS + pci_set_region(hose->regions + 0, + PCI_SLV_MEM_BUS, + PCI_SLV_MEM_LOCAL, + gd->ram_size, + PCI_REGION_MEM | PCI_REGION_MEMORY); +#else pci_set_region(hose->regions + 1, PCI_MSTR_MEM_BUS, PCI_MSTR_MEM_LOCAL, PCI_MSTR_MEM_SIZE, PCI_REGION_MEM); +#endif /* PCI I/O space */ pci_set_region(hose->regions + 2, diff --git a/cpu/mpc8260/start.S b/cpu/mpc8260/start.S index d79c5789f7..9ceb704955 100644 --- a/cpu/mpc8260/start.S +++ b/cpu/mpc8260/start.S @@ -67,7 +67,7 @@ GOT_ENTRY(transfer_to_handler) GOT_ENTRY(_end) - GOT_ENTRY(.bss) + GOT_ENTRY(__bss_start) #if defined(CONFIG_HYMOD) GOT_ENTRY(environment) #endif @@ -987,7 +987,7 @@ clear_bss: /* * Now clear BSS segment */ - lwz r3,GOT(.bss) + lwz r3,GOT(__bss_start) #if defined(CONFIG_HYMOD) /* * For HYMOD - the environment is the very last item in flash. diff --git a/cpu/mpc8xx/start.S b/cpu/mpc8xx/start.S index 213c9a9bed..3cd0d9ae74 100644 --- a/cpu/mpc8xx/start.S +++ b/cpu/mpc8xx/start.S @@ -74,7 +74,7 @@ GOT_ENTRY(transfer_to_handler) GOT_ENTRY(_end) - GOT_ENTRY(.bss) + GOT_ENTRY(__bss_start) #if defined(CONFIG_FADS) || defined(CONFIG_ICU862) GOT_ENTRY(environment) #endif @@ -684,7 +684,7 @@ clear_bss: /* * Now clear BSS segment */ - lwz r3,GOT(.bss) + lwz r3,GOT(__bss_start) #if defined(CONFIG_FADS) || defined(CONFIG_ICU862) /* * For the FADS - the environment is the very last item in flash. diff --git a/cpu/ppc4xx/spd_sdram.c b/cpu/ppc4xx/spd_sdram.c index bf5d22429d..9c1cac5d0e 100644 --- a/cpu/ppc4xx/spd_sdram.c +++ b/cpu/ppc4xx/spd_sdram.c @@ -289,7 +289,7 @@ long int spd_sdram(int(read_spd)(uint addr)) /* now check for ECC ability of module. We only support ECC * on 32 bit wide devices with 8 bit ECC. */ - if ( (read_spd(11)==2) && ((read_spd(6)==40) || (read_spd(14)==8)) ){ + if ( (read_spd(11)==2) && (read_spd(6)==40) && (read_spd(14)==8) ){ sdram0_ecccfg=0xf<<SDRAM0_ECCCFG_SHIFT; ecc_on = 1; } diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S index c40a8dba8b..c334f936b3 100644 --- a/cpu/ppc4xx/start.S +++ b/cpu/ppc4xx/start.S @@ -133,7 +133,7 @@ GOT_ENTRY(transfer_to_handler) GOT_ENTRY(_end) - GOT_ENTRY(.bss) + GOT_ENTRY(__bss_start) END_GOT /* @@ -1339,7 +1339,7 @@ clear_bss: /* * Now clear BSS segment */ - lwz r3,GOT(.bss) + lwz r3,GOT(__bss_start) lwz r4,GOT(_end) cmplw 0, r3, r4 diff --git a/drivers/pci_indirect.c b/drivers/pci_indirect.c index fdf4d130a5..05cfbd9b66 100644 --- a/drivers/pci_indirect.c +++ b/drivers/pci_indirect.c @@ -21,7 +21,7 @@ #define cfg_read(val, addr, type, op) *val = op((type)(addr)) #define cfg_write(val, addr, type, op) op((type *)(addr), (val)) -#if defined(CONFIG_PM826) || defined(CONFIG_ATC) +#if defined(CONFIG_MPC8260) #define INDIRECT_PCI_OP(rw, size, type, op, mask) \ static int \ indirect_##rw##_config_##size(struct pci_controller *hose, \ diff --git a/include/configs/FADS860T.h b/include/configs/FADS860T.h index 0e2a4c6448..2c9438988e 100644 --- a/include/configs/FADS860T.h +++ b/include/configs/FADS860T.h @@ -159,8 +159,8 @@ /*----------------------------------------------------------------------- * FLASH organization */ -#define CFG_MAX_FLASH_BANKS 4 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 8 /* max number of sectors on one chip */ +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 16 /* max number of sectors on one chip */ #define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ #define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ diff --git a/include/configs/MPC8260ADS.h b/include/configs/MPC8260ADS.h index 48cd9b31bd..1849bcc1ec 100644 --- a/include/configs/MPC8260ADS.h +++ b/include/configs/MPC8260ADS.h @@ -191,7 +191,7 @@ /* this is stuff came out of the Motorola docs */ #define CFG_DEFAULT_IMMR 0x0F010000 -#define CFG_IMMR 0x04700000 +#define CFG_IMMR 0xF0000000 #define CFG_BCSR 0x04500000 #define CFG_SDRAM_BASE 0x00000000 #define CFG_LSDRAM_BASE 0x04000000 diff --git a/include/configs/MPC8266ADS.h b/include/configs/MPC8266ADS.h index 5655547a68..e0159a2b69 100644 --- a/include/configs/MPC8266ADS.h +++ b/include/configs/MPC8266ADS.h @@ -39,7 +39,7 @@ */ #define CONFIG_MPC8260 1 /* This is an MPC8260 CPU */ -#define CONFIG_MPC8260ADS 1 /* ...on motorola ads board */ +#define CONFIG_MPC8266ADS 1 /* ...on motorola ads board */ #define CONFIG_BOARD_PRE_INIT 1 /* Call board_pre_init */ @@ -78,6 +78,23 @@ #define CONFIG_ETHER_ON_FCC /* define if ether on FCC */ #undef CONFIG_ETHER_NONE /* define if ether on something else */ #define CONFIG_ETHER_INDEX 2 /* which channel for ether */ +#define CONFIG_MII /* MII PHY management */ +#define CONFIG_BITBANGMII /* bit-bang MII PHY management */ +/* + * Port pins used for bit-banged MII communictions (if applicable). + */ +#define MDIO_PORT 2 /* Port C */ +#define MDIO_ACTIVE (iop->pdir |= 0x00400000) +#define MDIO_TRISTATE (iop->pdir &= ~0x00400000) +#define MDIO_READ ((iop->pdat & 0x00400000) != 0) + +#define MDIO(bit) if(bit) iop->pdat |= 0x00400000; \ + else iop->pdat &= ~0x00400000 + +#define MDC(bit) if(bit) iop->pdat |= 0x00200000; \ + else iop->pdat &= ~0x00200000 + +#define MIIDELAY udelay(1) #if (CONFIG_ETHER_INDEX == 2) @@ -90,7 +107,7 @@ # define CFG_CMXFCR_MASK (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK) # define CFG_CMXFCR_VALUE (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14) # define CFG_CPMFCR_RAMTYPE 0 -# define CFG_FCC_PSMR 0 +# define CFG_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB) #endif /* CONFIG_ETHER_INDEX */ @@ -100,6 +117,12 @@ #define CFG_I2C_SLAVE 0x7F #define CFG_I2C_EEPROM_ADDR_LEN 1 +/* PCI */ +#define CONFIG_PCI +#define CONFIG_PCI_PNP +#define CONFIG_PCI_BOOTDELAY 0 +#undef CONFIG_PCI_SCAN_SHOW + /*----------------------------------------------------------------------- * Definitions for Serial Presence Detect EEPROM address * (to get SDRAM settings) @@ -107,7 +130,7 @@ #define SPD_EEPROM_ADDRESS 0x50 -#define CONFIG_8260_CLKIN 66666666 /* in Hz */ +#define CONFIG_8260_CLKIN 66000000 /* in Hz */ #define CONFIG_BAUDRATE 115200 @@ -116,6 +139,7 @@ CFG_CMD_BMP | \ CFG_CMD_BSP | \ CFG_CMD_DATE | \ + CFG_CMD_DHCP | \ CFG_CMD_DOC | \ CFG_CMD_DTT | \ CFG_CMD_EEPROM | \ @@ -127,21 +151,51 @@ CFG_CMD_JFFS2 | \ CFG_CMD_KGDB | \ CFG_CMD_NAND | \ - CFG_CMD_MII | \ - CFG_CMD_PCI | \ CFG_CMD_PCMCIA | \ CFG_CMD_SCSI | \ CFG_CMD_SPI | \ CFG_CMD_VFD | \ CFG_CMD_USB ) ) +/* Define a command string that is automatically executed when no character + * is read on the console interface withing "Boot Delay" after reset. + */ +#define CONFIG_BOOT_ROOT_INITRD 0 /* Use ram disk for the root file system */ +#define CONFIG_BOOT_ROOT_NFS 1 /* Use a NFS mounted root file system */ + +#if CONFIG_BOOT_ROOT_INITRD +#define CONFIG_BOOTCOMMAND \ + "version;" \ + "echo;" \ + "bootp;" \ + "setenv bootargs root=/dev/ram0 rw " \ + "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off;" \ + "bootm" +#endif /* CONFIG_BOOT_ROOT_INITRD */ + +#if CONFIG_BOOT_ROOT_NFS +#define CONFIG_BOOTCOMMAND \ + "version;" \ + "echo;" \ + "bootp;" \ + "setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \ + "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off;" \ + "bootm" +#endif /* CONFIG_BOOT_ROOT_NFS */ + +/* Add support for a few extra bootp options like: + * - File size + * - DNS + */ +#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \ + CONFIG_BOOTP_BOOTFILESIZE | \ + CONFIG_BOOTP_DNS) + /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#define CONFIG_BOOTCOMMAND "bootm 100000" /* autoboot command */ -#define CONFIG_BOOTARGS "root=/dev/ram rw" #if (CONFIG_COMMANDS & CFG_CMD_KGDB) #undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */ @@ -170,7 +224,7 @@ #define CFG_MEMTEST_START 0x00100000 /* memtest works on */ #define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ -#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */ +#undef CONFIG_CLOCKS_IN_MHZ /* clocks passsed to Linux in MHz */ /* for versions < 2.4.5-pre5 */ #define CFG_LOAD_ADDR 0x100000 /* default load address */ @@ -179,8 +233,8 @@ #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } -#define CFG_FLASH_BASE 0xff800000 -#define FLASH_BASE 0xff800000 +#define CFG_FLASH_BASE 0xFE000000 +#define FLASH_BASE 0xFE000000 #define CFG_MAX_FLASH_BANKS 1 /* max num of memory banks */ #define CFG_MAX_FLASH_SECT 32 /* max num of sects on one chip */ #define CFG_FLASH_SIZE 8 @@ -193,14 +247,10 @@ /* Only change this if you also change the Hardware configuration Word */ #define CFG_DEFAULT_IMMR 0x0F010000 -/* -#define CFG_IMMR 0x04700000 -#define CFG_BCSR 0x04500000 -*/ - /* Set IMMR to 0xF0000000 or above to boot Linux */ #define CFG_IMMR 0xF0000000 -#define CFG_BCSR 0x04500000 +#define CFG_BCSR 0xF8000000 +#define CFG_PCI_INT 0xF8200000 /* PCI interrupt controller */ /* Define CONFIG_VERY_BIG_RAM to allow use of SDRAMs larger than 256MBytes */ @@ -263,7 +313,7 @@ ORxS_ROWST_PBI0_A8 |\ ORxS_NUMR_12) #elif (CFG_SDRAM_SIZE == 16) -#define CFG_OR2_PRELIM (0xFF000CA0) +#define CFG_OR2_PRELIM (0xFF000C80) #else #error "INVALID SDRAM CONFIGURATION" #endif @@ -325,13 +375,13 @@ #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET -/* 0x0EA28205 */ -/*#define CFG_HRCW_MASTER ( ( HRCW_BPS11 | HRCW_CIP ) |\ - ( HRCW_L2CPC10 | HRCW_DPPC10 | HRCW_ISB010 ) |\ - ( HRCW_BMS | HRCW_APPC10 ) |\ - ( HRCW_MODCK_H0101 ) \ +/* 0x0EB2B645 */ +#define CFG_HRCW_MASTER (( HRCW_BPS11 | HRCW_CIP ) |\ + ( HRCW_L2CPC10 | HRCW_DPPC11 | HRCW_ISB010 ) |\ + ( HRCW_BMS | HRCW_MMR11 | HRCW_LBPC01 | HRCW_APPC10 ) |\ + ( HRCW_CS10PC01 | HRCW_MODCK_H0101 ) \ ) -*/ + /* This value should actually be situated in the first 256 bytes of the FLASH which on the standard MPC8266ADS board is at address 0xFF800000 @@ -346,7 +396,7 @@ - Rune */ -#define CFG_HRCW_MASTER 0x0cb23645 +/* #define CFG_HRCW_MASTER 0x0cb23645 */ /* no slaves */ #define CFG_HRCW_SLAVE1 0 @@ -392,22 +442,98 @@ #define CFG_HID2 0 #define CFG_SYPCR 0xFFFFFFC3 -#define CFG_BCR 0x100C0000 -#define CFG_SIUMCR 0x0A200000 +#define CFG_BCR 0x004C0000 +#define CFG_SIUMCR 0x4E64C000 #define CFG_SCCR 0x00000000 -#define CFG_BR0_PRELIM 0xFF801801 -#define CFG_OR0_PRELIM 0xFF800836 -#define CFG_BR1_PRELIM 0x04501801 -#define CFG_OR1_PRELIM 0xFFFF8010 -#define CFG_RMR 0 +/* local bus memory map + * + * 0x00000000-0x03FFFFFF 64MB SDRAM + * 0x80000000-0x9FFFFFFF 512MB outbound prefetchable PCI memory window + * 0xA0000000-0xBFFFFFFF 512MB outbound non-prefetchable PCI memory window + * 0xF0000000-0xF001FFFF 128KB MPC8266 internal memory + * 0xF4000000-0xF7FFFFFF 64MB outbound PCI I/O window + * 0xF8000000-0xF8007FFF 32KB BCSR + * 0xF8100000-0xF8107FFF 32KB ATM UNI + * 0xF8200000-0xF8207FFF 32KB PCI interrupt controller + * 0xF8300000-0xF8307FFF 32KB EEPROM + * 0xFE000000-0xFFFFFFFF 32MB flash + */ +#define CFG_BR0_PRELIM 0xFE001801 /* flash */ +#define CFG_OR0_PRELIM 0xFE000836 +#define CFG_BR1_PRELIM (CFG_BCSR | 0x1801) /* BCSR */ +#define CFG_OR1_PRELIM 0xFFFF8010 +#define CFG_BR4_PRELIM 0xF8300801 /* EEPROM */ +#define CFG_OR4_PRELIM 0xFFFF8846 +#define CFG_BR5_PRELIM 0xF8100801 /* PM5350 ATM UNI */ +#define CFG_OR5_PRELIM 0xFFFF8E36 +#define CFG_BR8_PRELIM (CFG_PCI_INT | 0x1801) /* PCI interrupt controller */ +#define CFG_OR8_PRELIM 0xFFFF8010 + +#define CFG_RMR 0x0001 #define CFG_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE) #define CFG_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE) #define CFG_RCCR 0 -/*#define CFG_PSDMR 0x016EB452*/ #define CFG_MPTPR 0x00001900 #define CFG_PSRT 0x00000021 #define CFG_RESET_ADDRESS 0x04400000 +/* PCI Memory map (if different from default map */ +#define CFG_PCI_SLV_MEM_LOCAL CFG_SDRAM_BASE /* Local base */ +#define CFG_PCI_SLV_MEM_BUS 0x00000000 /* PCI base */ +#define CFG_PICMR0_MASK_ATTRIB (PICMR_MASK_512MB | PICMR_ENABLE | \ + PICMR_PREFETCH_EN) + +/* + * These are the windows that allow the CPU to access PCI address space. + * All three PCI master windows, which allow the CPU to access PCI + * prefetch, non prefetch, and IO space (see below), must all fit within + * these windows. + */ + +/* PCIBR0 */ +#define CFG_PCI_MSTR0_LOCAL 0x80000000 /* Local base */ +#define CFG_PCIMSK0_MASK PCIMSK_1GB /* Size of window */ +/* PCIBR1 */ +#define CFG_PCI_MSTR1_LOCAL 0xF4000000 /* Local base */ +#define CFG_PCIMSK1_MASK PCIMSK_64MB /* Size of window */ + +/* + * Master window that allows the CPU to access PCI Memory (prefetch). + * This window will be setup with the first set of Outbound ATU registers + * in the bridge. + */ + +#define CFG_PCI_MSTR_MEM_LOCAL 0x80000000 /* Local base */ +#define CFG_PCI_MSTR_MEM_BUS 0x80000000 /* PCI base */ +#define CFG_CPU_PCI_MEM_START PCI_MSTR_MEM_LOCAL +#define CFG_PCI_MSTR_MEM_SIZE 0x20000000 /* 512MB */ +#define CFG_POCMR0_MASK_ATTRIB (POCMR_MASK_512MB | POCMR_ENABLE | POCMR_PREFETCH_EN) + +/* + * Master window that allows the CPU to access PCI Memory (non-prefetch). + * This window will be setup with the second set of Outbound ATU registers + * in the bridge. + */ + +#define CFG_PCI_MSTR_MEMIO_LOCAL 0xA0000000 /* Local base */ +#define CFG_PCI_MSTR_MEMIO_BUS 0xA0000000 /* PCI base */ +#define CPU_PCI_MEMIO_START PCI_MSTR_MEMIO_LOCAL +#define CFG_PCI_MSTR_MEMIO_SIZE 0x20000000 /* 512MB */ +#define CFG_POCMR1_MASK_ATTRIB (POCMR_MASK_512MB | POCMR_ENABLE) + +/* + * Master window that allows the CPU to access PCI IO space. + * This window will be setup with the third set of Outbound ATU registers + * in the bridge. + */ + +#define CFG_PCI_MSTR_IO_LOCAL 0xF4000000 /* Local base */ +#define CFG_PCI_MSTR_IO_BUS 0x00000000 /* PCI base */ +#define CFG_CPU_PCI_IO_START PCI_MSTR_IO_LOCAL +#define CFG_PCI_MSTR_IO_SIZE 0x04000000 /* 64MB */ +#define CFG_POCMR2_MASK_ATTRIB (POCMR_MASK_64MB | POCMR_ENABLE | POCMR_PCI_IO) + + #endif /* __CONFIG_H */ diff --git a/include/configs/PM826.h b/include/configs/PM826.h index 6e32a4b3d6..018865e88e 100644 --- a/include/configs/PM826.h +++ b/include/configs/PM826.h @@ -155,12 +155,22 @@ #define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE) +#ifdef CONFIG_PCI +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CFG_CMD_BEDBUG | \ + CFG_CMD_DATE | \ + CFG_CMD_DOC | \ + CFG_CMD_EEPROM | \ + CFG_CMD_I2C | \ + CFG_CMD_PCI) +#else /* ! PCI */ #define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ CFG_CMD_BEDBUG | \ CFG_CMD_DATE | \ CFG_CMD_DOC | \ CFG_CMD_EEPROM | \ CFG_CMD_I2C ) +#endif /* CONFIG_PCI */ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> diff --git a/include/configs/WALNUT405.h b/include/configs/WALNUT405.h index 68d47bb6d7..36674dbfbc 100644 --- a/include/configs/WALNUT405.h +++ b/include/configs/WALNUT405.h @@ -191,7 +191,7 @@ #define CFG_SDRAM_BASE 0x00000000 #define CFG_FLASH_BASE 0xFFF80000 #define CFG_MONITOR_BASE CFG_FLASH_BASE -#define CFG_MONITOR_LEN (192 * 1024) /* Reserve 196 kB for Monitor */ +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */ #define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */ /* diff --git a/include/configs/atc.h b/include/configs/atc.h index 4f308471a9..0e968b1d3d 100644 --- a/include/configs/atc.h +++ b/include/configs/atc.h @@ -248,6 +248,7 @@ #define CONFIG_PCI #define CONFIG_PCI_PNP +#define CFG_PCI_MSTR_IO_BUS 0x00000000 /* PCI base */ #if 1 /* environment is in Flash */ diff --git a/include/flash.h b/include/flash.h index b7f13d340a..2693a35320 100644 --- a/include/flash.h +++ b/include/flash.h @@ -129,6 +129,8 @@ extern int flash_real_protect(flash_info_t *info, long sector, int prot); /* 4 Mbit, 512K x 8, */ /* 8 64K x 8 uniform sectors */ #define AMD_ID_F080B 0xD5 /* 29F080 ID ( 1 M) */ + /* 8 Mbit, 512K x 16, */ + /* 8 64K x 16 uniform sectors */ #define AMD_ID_F016D 0xAD /* 29F016 ID ( 2 M x 8) */ #define AMD_ID_F032B 0x41 /* 29F032 ID ( 4 M x 8) */ #define AMD_ID_LV116DT 0xC7 /* 29LV116DT ( 2 M x 8, top boot sect) */ @@ -219,13 +221,12 @@ extern int flash_real_protect(flash_info_t *info, long sector, int prot); * Be careful when adding new type! Odd numbers are "bottom boot sector" types! */ -#define FLASH_AM040 0x0001 /* AMD Am29F040B, Am29LV040B - * Bright Micro BM29F040 - * Fujitsu MBM29F040A - * STM M29W040B - * SGS Thomson M29F040B - * 8 64K x 8 uniform sectors - */ +#define FLASH_AM040 0x0001 /* AMD Am29F040B, Am29LV040B */ + /* Bright Micro BM29F040 */ + /* Fujitsu MBM29F040A */ + /* STM M29W040B */ + /* SGS Thomson M29F040B */ + /* 8 64K x 8 uniform sectors */ #define FLASH_AM400T 0x0002 /* AMD AM29LV400 */ #define FLASH_AM400B 0x0003 #define FLASH_AM800T 0x0004 /* AMD AM29LV800 */ @@ -237,6 +238,9 @@ extern int flash_real_protect(flash_info_t *info, long sector, int prot); #define FLASH_AM320T 0x0008 /* AMD AM29LV320 */ #define FLASH_AM320B 0x0009 +#define FLASH_AM080 0x000A /* AMD Am29F080B */ + /* 16 64K x 8 uniform sectors */ + #define FLASH_AMDL322T 0x0010 /* AMD AM29DL322 */ #define FLASH_AMDL322B 0x0011 #define FLASH_AMDL323T 0x0012 /* AMD AM29DL323 */ diff --git a/lib_ppc/board.c b/lib_ppc/board.c index 923f70e9ef..a11288d430 100644 --- a/lib_ppc/board.c +++ b/lib_ppc/board.c @@ -843,6 +843,7 @@ void board_init_r (gd_t *id, ulong dest_addr) defined(CONFIG_IVMS8) || \ defined(CONFIG_LWMON) || \ defined(CONFIG_MPC8260ADS) || \ + defined(CONFIG_MPC8266ADS) || \ defined(CONFIG_PCU_E) || \ defined(CONFIG_RPXSUPER) || \ defined(CONFIG_SPD823TS) ) |