diff options
26 files changed, 421 insertions, 205 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 634bc48413..f55d5b2cd7 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -851,6 +851,8 @@ config ARCH_ROCKCHIP select DM_SPI select DM_SPI_FLASH select DM_USB if USB + select DM_PWM + select DM_REGULATOR config TARGET_THUNDERX_88XX bool "Support ThunderX 88xx" diff --git a/arch/arm/dts/rk3288-miniarm.dtsi b/arch/arm/dts/rk3288-miniarm.dtsi index b88987557a..ceb4e2bdb1 100644 --- a/arch/arm/dts/rk3288-miniarm.dtsi +++ b/arch/arm/dts/rk3288-miniarm.dtsi @@ -116,18 +116,6 @@ cpu0-supply = <&vdd_cpu>; }; -&emmc { - broken-cd; - bus-width = <8>; - cap-mmc-highspeed; - disable-wp; - non-removable; - num-slots = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>; - status = "okay"; -}; - &sdmmc { bus-width = <4>; cap-mmc-highspeed; diff --git a/arch/arm/dts/rk3399-evb.dts b/arch/arm/dts/rk3399-evb.dts index bd7801b9a5..fa60e191ed 100644 --- a/arch/arm/dts/rk3399-evb.dts +++ b/arch/arm/dts/rk3399-evb.dts @@ -23,6 +23,7 @@ regulator-name = "vdd_center"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1400000>; + regulator-init-microvolt = <950000>; regulator-always-on; regulator-boot-on; status = "okay"; diff --git a/arch/arm/include/asm/arch-rockchip/boot_mode.h b/arch/arm/include/asm/arch-rockchip/boot_mode.h new file mode 100644 index 0000000000..bd65f60bf2 --- /dev/null +++ b/arch/arm/include/asm/arch-rockchip/boot_mode.h @@ -0,0 +1,19 @@ +#ifndef __REBOOT_MODE_H +#define __REBOOT_MODE_H + +/* high 24 bits is tag, low 8 bits is type */ +#define REBOOT_FLAG 0x5242C300 +/* normal boot */ +#define BOOT_NORMAL (REBOOT_FLAG + 0) +/* enter loader rockusb mode */ +#define BOOT_LOADER (REBOOT_FLAG + 1) +/* enter recovery */ +#define BOOT_RECOVERY (REBOOT_FLAG + 3) +/* enter fastboot mode */ +#define BOOT_FASTBOOT (REBOOT_FLAG + 9) +/* enter charging mode */ +#define BOOT_CHARGING (REBOOT_FLAG + 11) +/* enter usb mass storage mode */ +#define BOOT_UMS (REBOOT_FLAG + 12) + +#endif diff --git a/arch/arm/include/asm/arch-rockchip/cru_rk3399.h b/arch/arm/include/asm/arch-rockchip/cru_rk3399.h index c919f47745..6776e484b7 100644 --- a/arch/arm/include/asm/arch-rockchip/cru_rk3399.h +++ b/arch/arm/include/asm/arch-rockchip/cru_rk3399.h @@ -64,9 +64,9 @@ check_member(rk3399_cru, sdio1_con[1], 0x594); #define APLL_HZ (600*MHz) #define GPLL_HZ (594*MHz) #define CPLL_HZ (384*MHz) -#define PPLL_HZ (594*MHz) +#define PPLL_HZ (676*MHz) -#define PMU_PCLK_HZ (99*MHz) +#define PMU_PCLK_HZ (48*MHz) #define ACLKM_CORE_HZ (300*MHz) #define ATCLK_CORE_HZ (300*MHz) diff --git a/arch/arm/include/asm/arch-rockchip/pwm.h b/arch/arm/include/asm/arch-rockchip/pwm.h index 08ff94591c..5d9a178a70 100644 --- a/arch/arm/include/asm/arch-rockchip/pwm.h +++ b/arch/arm/include/asm/arch-rockchip/pwm.h @@ -10,8 +10,8 @@ struct rk3288_pwm { u32 cnt; - u32 period_hpr; u32 duty_lpr; + u32 period_hpr; u32 ctrl; }; check_member(rk3288_pwm, ctrl, 0xc); diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig index 1aac3c85ba..8a5d62a735 100644 --- a/arch/arm/mach-rockchip/Kconfig +++ b/arch/arm/mach-rockchip/Kconfig @@ -42,6 +42,9 @@ config ROCKCHIP_SPL_BACK_TO_BROM SPL will return to the boot rom, which will then load the U-Boot binary to keep going on. +config SPL_MMC_SUPPORT + default y if !ROCKCHIP_SPL_BACK_TO_BROM + source "arch/arm/mach-rockchip/rk3036/Kconfig" source "arch/arm/mach-rockchip/rk3288/Kconfig" source "arch/arm/mach-rockchip/rk3399/Kconfig" diff --git a/arch/arm/mach-rockchip/Makefile b/arch/arm/mach-rockchip/Makefile index 157d42fe96..6e79fed485 100644 --- a/arch/arm/mach-rockchip/Makefile +++ b/arch/arm/mach-rockchip/Makefile @@ -9,7 +9,8 @@ obj-$(CONFIG_ROCKCHIP_RK3036) += rk3036-board-spl.o obj-$(CONFIG_ROCKCHIP_RK3288) += rk3288-board-spl.o obj-$(CONFIG_ROCKCHIP_SPL_BACK_TO_BROM) += save_boot_param.o else -obj-$(CONFIG_ROCKCHIP_RK3288) += board.o +obj-$(CONFIG_ROCKCHIP_RK3288) += rk3288-board.o +obj-$(CONFIG_ROCKCHIP_RK3036) += rk3036-board.o endif ifndef CONFIG_ARM64 obj-y += rk_timer.o diff --git a/arch/arm/mach-rockchip/rk3036-board.c b/arch/arm/mach-rockchip/rk3036-board.c new file mode 100644 index 0000000000..bf2b268f8b --- /dev/null +++ b/arch/arm/mach-rockchip/rk3036-board.c @@ -0,0 +1,122 @@ +/* + * (C) Copyright 2015 Rockchip Electronics Co., Ltd + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <clk.h> +#include <dm.h> +#include <ram.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/periph.h> +#include <asm/arch/grf_rk3036.h> +#include <asm/arch/boot_mode.h> +#include <asm/arch/sdram_rk3036.h> +#include <asm/gpio.h> +#include <dm/pinctrl.h> + +DECLARE_GLOBAL_DATA_PTR; + +#define GRF_BASE 0x20008000 + +static void setup_boot_mode(void) +{ + struct rk3036_grf *const grf = (void *)GRF_BASE; + int boot_mode = readl(&grf->os_reg[4]); + + debug("boot mode %x.\n", boot_mode); + + /* Clear boot mode */ + writel(BOOT_NORMAL, &grf->os_reg[4]); + + switch (boot_mode) { + case BOOT_FASTBOOT: + printf("enter fastboot!\n"); + setenv("preboot", "setenv preboot; fastboot usb0"); + break; + case BOOT_UMS: + printf("enter UMS!\n"); + setenv("preboot", "setenv preboot; ums mmc 0"); + break; + } +} + +__weak int rk_board_late_init(void) +{ + return 0; +} + +int board_late_init(void) +{ + setup_boot_mode(); + + return rk_board_late_init(); +} + +int board_init(void) +{ + return 0; +} + +int dram_init(void) +{ + gd->ram_size = sdram_size(); + + return 0; +} + +#ifndef CONFIG_SYS_DCACHE_OFF +void enable_caches(void) +{ + /* Enable D-cache. I-cache is already enabled in start.S */ + dcache_enable(); +} +#endif + +#if defined(CONFIG_USB_GADGET) && defined(CONFIG_USB_GADGET_DWC2_OTG) +#include <usb.h> +#include <usb/dwc2_udc.h> + +static struct dwc2_plat_otg_data rk3036_otg_data = { + .rx_fifo_sz = 512, + .np_tx_fifo_sz = 16, + .tx_fifo_sz = 128, +}; + +int board_usb_init(int index, enum usb_init_type init) +{ + int node; + const char *mode; + bool matched = false; + const void *blob = gd->fdt_blob; + + /* find the usb_otg node */ + node = fdt_node_offset_by_compatible(blob, -1, + "rockchip,rk3288-usb"); + + while (node > 0) { + mode = fdt_getprop(blob, node, "dr_mode", NULL); + if (mode && strcmp(mode, "otg") == 0) { + matched = true; + break; + } + + node = fdt_node_offset_by_compatible(blob, node, + "rockchip,rk3288-usb"); + } + if (!matched) { + debug("Not found usb_otg device\n"); + return -ENODEV; + } + rk3036_otg_data.regs_otg = fdtdec_get_addr(blob, node, "reg"); + + return dwc2_udc_probe(&rk3036_otg_data); +} + +int board_usb_cleanup(int index, enum usb_init_type init) +{ + return 0; +} +#endif diff --git a/arch/arm/mach-rockchip/rk3288-board-spl.c b/arch/arm/mach-rockchip/rk3288-board-spl.c index ae509ffab2..0f40351769 100644 --- a/arch/arm/mach-rockchip/rk3288-board-spl.c +++ b/arch/arm/mach-rockchip/rk3288-board-spl.c @@ -206,7 +206,7 @@ void board_init_f(ulong dummy) debug("DRAM init failed: %d\n", ret); return; } -#ifdef CONFIG_ROCKCHIP_SPL_BACK_TO_BROM +#if defined(CONFIG_ROCKCHIP_SPL_BACK_TO_BROM) && !defined(CONFIG_SPL_BOARD_INIT) back_to_bootrom(); #endif } @@ -273,6 +273,9 @@ void spl_board_init(void) } preloader_console_init(); +#ifdef CONFIG_ROCKCHIP_SPL_BACK_TO_BROM + back_to_bootrom(); +#endif return; err: printf("spl_board_init: Error %d\n", ret); diff --git a/arch/arm/mach-rockchip/board.c b/arch/arm/mach-rockchip/rk3288-board.c index 6c36bf9397..baf9522bcd 100644 --- a/arch/arm/mach-rockchip/board.c +++ b/arch/arm/mach-rockchip/rk3288-board.c @@ -8,25 +8,65 @@ #include <clk.h> #include <dm.h> #include <ram.h> +#include <syscon.h> #include <asm/io.h> #include <asm/arch/clock.h> #include <asm/arch/periph.h> +#include <asm/arch/pmu_rk3288.h> +#include <asm/arch/boot_mode.h> #include <asm/gpio.h> #include <dm/pinctrl.h> DECLARE_GLOBAL_DATA_PTR; +#define PMU_BASE 0xff730000 + +static void setup_boot_mode(void) +{ + struct rk3288_pmu *const pmu = (void *)PMU_BASE; + int boot_mode = readl(&pmu->sys_reg[0]); + + debug("boot mode %x.\n", boot_mode); + + /* Clear boot mode */ + writel(BOOT_NORMAL, &pmu->sys_reg[0]); + + switch (boot_mode) { + case BOOT_FASTBOOT: + printf("enter fastboot!\n"); + setenv("preboot", "setenv preboot; fastboot usb0"); + break; + case BOOT_UMS: + printf("enter UMS!\n"); + setenv("preboot", "setenv preboot; if mmc dev 0;" + "then ums mmc 0; else ums mmc 1;fi"); + break; + } +} + +__weak int rk_board_late_init(void) +{ + return 0; +} + +int board_late_init(void) +{ + setup_boot_mode(); + + return rk_board_late_init(); +} + int board_init(void) { #ifdef CONFIG_ROCKCHIP_SPL_BACK_TO_BROM struct udevice *pinctrl; int ret; - /* - * We need to implement sdcard iomux here for the further - * initlization, otherwise, it'll hit sdcard command sending - * timeout exception. - */ + /* + * We need to implement sdcard iomux here for the further + * initlization, otherwise, it'll hit sdcard command sending + * timeout exception. + */ ret = uclass_get_device(UCLASS_PINCTRL, 0, &pinctrl); if (ret) { debug("%s: Cannot find pinctrl device\n", __func__); diff --git a/arch/arm/mach-rockchip/rk3288/sdram_rk3288.c b/arch/arm/mach-rockchip/rk3288/sdram_rk3288.c index cf9ef2e845..8020e9c6e2 100644 --- a/arch/arm/mach-rockchip/rk3288/sdram_rk3288.c +++ b/arch/arm/mach-rockchip/rk3288/sdram_rk3288.c @@ -755,10 +755,11 @@ size_t sdram_size_mb(struct rk3288_pmu *pmu) } /* - * we use the 0x00000000~0xfeffffff space since 0xff000000~0xffffffff - * is SoC register space (i.e. reserved) + * we use the 0x00000000~0xfdffffff space since 0xff000000~0xffffffff + * is SoC register space (i.e. reserved), and 0xfe000000~0xfeffffff is + * inaccessible for some IP controller. */ - size_mb = min(size_mb, 0xff000000 >> 20); + size_mb = min(size_mb, 0xfe000000 >> 20); return size_mb; } diff --git a/board/rockchip/evb_rk3036/evb_rk3036.c b/board/rockchip/evb_rk3036/evb_rk3036.c index e5582b47d9..288370a80b 100644 --- a/board/rockchip/evb_rk3036/evb_rk3036.c +++ b/board/rockchip/evb_rk3036/evb_rk3036.c @@ -27,69 +27,3 @@ void get_ddr_config(struct rk3036_ddr_config *config) /* 16bit bw */ config->bw = 1; } - -int board_init(void) -{ - return 0; -} - -int dram_init(void) -{ - gd->ram_size = sdram_size(); - - return 0; -} - -#ifndef CONFIG_SYS_DCACHE_OFF -void enable_caches(void) -{ - /* Enable D-cache. I-cache is already enabled in start.S */ - dcache_enable(); -} -#endif - -#if defined(CONFIG_USB_GADGET) && defined(CONFIG_USB_GADGET_DWC2_OTG) -#include <usb.h> -#include <usb/dwc2_udc.h> - -static struct dwc2_plat_otg_data rk3036_otg_data = { - .rx_fifo_sz = 512, - .np_tx_fifo_sz = 16, - .tx_fifo_sz = 128, -}; - -int board_usb_init(int index, enum usb_init_type init) -{ - int node; - const char *mode; - bool matched = false; - const void *blob = gd->fdt_blob; - - /* find the usb_otg node */ - node = fdt_node_offset_by_compatible(blob, -1, - "rockchip,rk3288-usb"); - - while (node > 0) { - mode = fdt_getprop(blob, node, "dr_mode", NULL); - if (mode && strcmp(mode, "otg") == 0) { - matched = true; - break; - } - - node = fdt_node_offset_by_compatible(blob, node, - "rockchip,rk3288-usb"); - } - if (!matched) { - debug("Not found usb_otg device\n"); - return -ENODEV; - } - rk3036_otg_data.regs_otg = fdtdec_get_addr(blob, node, "reg"); - - return dwc2_udc_probe(&rk3036_otg_data); -} - -int board_usb_cleanup(int index, enum usb_init_type init) -{ - return 0; -} -#endif diff --git a/board/rockchip/evb_rk3399/evb-rk3399.c b/board/rockchip/evb_rk3399/evb-rk3399.c index 2580b389ac..c6e6cd3e0b 100644 --- a/board/rockchip/evb_rk3399/evb-rk3399.c +++ b/board/rockchip/evb_rk3399/evb-rk3399.c @@ -6,6 +6,7 @@ #include <common.h> #include <dm.h> #include <dm/pinctrl.h> +#include <dm/uclass-internal.h> #include <asm/arch/periph.h> #include <power/regulator.h> @@ -39,6 +40,11 @@ int board_init(void) goto out; } + /* rk3399 need init vdd_center to get correct output voltage */ + ret = regulator_get_by_platname("vdd_center", ®ulator); + if (ret) + debug("%s: Cannot get vdd_center regulator\n", __func__); + ret = regulator_get_by_platname("vcc5v0_host", ®ulator); if (ret) { debug("%s vcc5v0_host init fail! ret %d\n", __func__, ret); diff --git a/board/rockchip/kylin_rk3036/kylin_rk3036.c b/board/rockchip/kylin_rk3036/kylin_rk3036.c index 5ade695616..7e2edf4a56 100644 --- a/board/rockchip/kylin_rk3036/kylin_rk3036.c +++ b/board/rockchip/kylin_rk3036/kylin_rk3036.c @@ -8,14 +8,11 @@ #include <dm.h> #include <asm/io.h> #include <asm/arch/uart.h> -#include <asm/arch-rockchip/grf_rk3036.h> #include <asm/arch/sdram_rk3036.h> #include <asm/gpio.h> DECLARE_GLOBAL_DATA_PTR; -#define GRF_BASE 0x20008000 - void get_ddr_config(struct rk3036_ddr_config *config) { /* K4B4G1646Q config */ @@ -43,85 +40,12 @@ int fastboot_key_pressed(void) #define ROCKCHIP_BOOT_MODE_FASTBOOT 0x5242C309 -int board_late_init(void) +int rk_board_late_init(void) { - struct rk3036_grf * const grf = (void *)GRF_BASE; - int boot_mode = readl(&grf->os_reg[4]); - - /* Clear boot mode */ - writel(0, &grf->os_reg[4]); - - if (boot_mode == ROCKCHIP_BOOT_MODE_FASTBOOT || - fastboot_key_pressed()) { + if (fastboot_key_pressed()) { printf("enter fastboot!\n"); setenv("preboot", "setenv preboot; fastboot usb0"); } return 0; } - -int board_init(void) -{ - return 0; -} - -int dram_init(void) -{ - gd->ram_size = sdram_size(); - - return 0; -} - -#ifndef CONFIG_SYS_DCACHE_OFF -void enable_caches(void) -{ - /* Enable D-cache. I-cache is already enabled in start.S */ - dcache_enable(); -} -#endif - -#if defined(CONFIG_USB_GADGET) && defined(CONFIG_USB_GADGET_DWC2_OTG) -#include <usb.h> -#include <usb/dwc2_udc.h> - -static struct dwc2_plat_otg_data rk3036_otg_data = { - .rx_fifo_sz = 512, - .np_tx_fifo_sz = 16, - .tx_fifo_sz = 128, -}; - -int board_usb_init(int index, enum usb_init_type init) -{ - int node; - const char *mode; - bool matched = false; - const void *blob = gd->fdt_blob; - - /* find the usb_otg node */ - node = fdt_node_offset_by_compatible(blob, -1, - "rockchip,rk3288-usb"); - - while (node > 0) { - mode = fdt_getprop(blob, node, "dr_mode", NULL); - if (mode && strcmp(mode, "otg") == 0) { - matched = true; - break; - } - - node = fdt_node_offset_by_compatible(blob, node, - "rockchip,rk3288-usb"); - } - if (!matched) { - debug("Not found usb_otg device\n"); - return -ENODEV; - } - rk3036_otg_data.regs_otg = fdtdec_get_addr(blob, node, "reg"); - - return dwc2_udc_probe(&rk3036_otg_data); -} - -int board_usb_cleanup(int index, enum usb_init_type init) -{ - return 0; -} -#endif diff --git a/board/rockchip/miniarm_rk3288/miniarm-rk3288.c b/board/rockchip/miniarm_rk3288/miniarm-rk3288.c index aad74ef109..79541a3939 100644 --- a/board/rockchip/miniarm_rk3288/miniarm-rk3288.c +++ b/board/rockchip/miniarm_rk3288/miniarm-rk3288.c @@ -5,11 +5,3 @@ */ #include <common.h> -#include <spl.h> - -void board_boot_order(u32 *spl_boot_list) -{ - /* eMMC prior to sdcard */ - spl_boot_list[0] = BOOT_DEVICE_MMC2; - spl_boot_list[1] = BOOT_DEVICE_MMC1; -} diff --git a/configs/evb-rk3399_defconfig b/configs/evb-rk3399_defconfig index 25e89394f9..97f29669ca 100644 --- a/configs/evb-rk3399_defconfig +++ b/configs/evb-rk3399_defconfig @@ -23,6 +23,7 @@ CONFIG_ROCKCHIP_SDHCI=y CONFIG_ROCKCHIP_GPIO=y CONFIG_PINCTRL=y CONFIG_ROCKCHIP_RK3399_PINCTRL=y +CONFIG_REGULATOR_PWM=y CONFIG_RAM=y CONFIG_DEBUG_UART=y CONFIG_DEBUG_UART_BASE=0xFF1A0000 diff --git a/configs/rock2_defconfig b/configs/rock2_defconfig index fc9ff78943..036125689a 100644 --- a/configs/rock2_defconfig +++ b/configs/rock2_defconfig @@ -7,6 +7,8 @@ CONFIG_SPL_STACK_R_ADDR=0x80000 CONFIG_DEFAULT_DEVICE_TREE="rk3288-rock2-square" CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000 +# CONFIG_SPL_MMC_SUPPORT is not set +CONFIG_ROCKCHIP_SPL_BACK_TO_BROM=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMLS is not set diff --git a/drivers/power/regulator/Kconfig b/drivers/power/regulator/Kconfig index 17f22dda2b..c7e88c0081 100644 --- a/drivers/power/regulator/Kconfig +++ b/drivers/power/regulator/Kconfig @@ -42,6 +42,16 @@ config DM_REGULATOR_PFUZE100 features for REGULATOR PFUZE100. The driver implements get/set api for: value, enable and mode. +config REGULATOR_PWM + bool "Enable driver for PWM regulators" + depends on DM_REGULATOR + ---help--- + Enable support for the PWM regulator functions which voltage are + controlled by PWM duty ratio. Some of Rockchip board using this kind + of regulator. The driver implements get/set api for the various BUCKS. + This driver is controlled by a device tree node + which includes voltage limits. + config DM_REGULATOR_MAX77686 bool "Enable Driver Model for REGULATOR MAX77686" depends on DM_REGULATOR && DM_PMIC_MAX77686 diff --git a/drivers/power/regulator/Makefile b/drivers/power/regulator/Makefile index 1590d8557e..ab461ec3ef 100644 --- a/drivers/power/regulator/Makefile +++ b/drivers/power/regulator/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_$(SPL_)DM_REGULATOR) += regulator-uclass.o obj-$(CONFIG_REGULATOR_ACT8846) += act8846.o obj-$(CONFIG_DM_REGULATOR_MAX77686) += max77686.o obj-$(CONFIG_DM_REGULATOR_PFUZE100) += pfuze100.o +obj-$(CONFIG_REGULATOR_PWM) += pwm_regulator.o obj-$(CONFIG_$(SPL_)DM_REGULATOR_FIXED) += fixed.o obj-$(CONFIG_REGULATOR_RK808) += rk808.o obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o diff --git a/drivers/power/regulator/pwm_regulator.c b/drivers/power/regulator/pwm_regulator.c new file mode 100644 index 0000000000..b0a4c5da6d --- /dev/null +++ b/drivers/power/regulator/pwm_regulator.c @@ -0,0 +1,159 @@ +/* + * Copyright (C) 2016 Rockchip Electronics Co., Ltd + * + * Based on kernel drivers/regulator/pwm-regulator.c + * Copyright (C) 2014 - STMicroelectronics Inc. + * Author: Lee Jones <lee.jones@linaro.org> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <dm.h> +#include <errno.h> +#include <pwm.h> +#include <power/regulator.h> +#include <libfdt.h> +#include <fdt_support.h> +#include <fdtdec.h> + +DECLARE_GLOBAL_DATA_PTR; + +struct pwm_regulator_info { + /* pwm id corresponding to the PWM driver */ + int pwm_id; + /* the period of one PWM cycle */ + int period_ns; + struct udevice *pwm; + /* initialize voltage of regulator */ + unsigned int init_voltage; + /* the maximum voltage of regulator */ + unsigned int max_voltage; + /* the minimum voltage of regulator */ + unsigned int min_voltage; + /* the current voltage of regulator */ + unsigned int volt_uV; +}; + +static int pwm_regulator_enable(struct udevice *dev, bool enable) +{ + struct pwm_regulator_info *priv = dev_get_priv(dev); + + return pwm_set_enable(priv->pwm, priv->pwm_id, enable); +} + +static int pwm_voltage_to_duty_cycle_percentage(struct udevice *dev, int req_uV) +{ + struct pwm_regulator_info *priv = dev_get_priv(dev); + int min_uV = priv->min_voltage; + int max_uV = priv->max_voltage; + int diff = max_uV - min_uV; + + return 100 - (((req_uV * 100) - (min_uV * 100)) / diff); +} + +static int pwm_regulator_get_voltage(struct udevice *dev) +{ + struct pwm_regulator_info *priv = dev_get_priv(dev); + + return priv->volt_uV; +} + +static int pwm_regulator_set_voltage(struct udevice *dev, int uvolt) +{ + struct pwm_regulator_info *priv = dev_get_priv(dev); + int duty_cycle; + int ret = 0; + + duty_cycle = pwm_voltage_to_duty_cycle_percentage(dev, uvolt); + + ret = pwm_set_config(priv->pwm, priv->pwm_id, + (priv->period_ns / 100) * duty_cycle, priv->period_ns); + if (ret) { + dev_err(dev, "Failed to configure PWM\n"); + return ret; + } + + ret = pwm_set_enable(priv->pwm, priv->pwm_id, true); + if (ret) { + dev_err(dev, "Failed to enable PWM\n"); + return ret; + } + priv->volt_uV = uvolt; + return ret; +} + +static int pwm_regulator_ofdata_to_platdata(struct udevice *dev) +{ + struct pwm_regulator_info *priv = dev_get_priv(dev); + struct fdtdec_phandle_args args; + const void *blob = gd->fdt_blob; + int node = dev->of_offset; + int ret; + + ret = fdtdec_parse_phandle_with_args(blob, node, "pwms", "#pwm-cells", + 0, 0, &args); + if (ret) { + debug("%s: Cannot get PWM phandle: ret=%d\n", __func__, ret); + return ret; + } + /* TODO: pwm_id here from device tree if needed */ + + priv->period_ns = args.args[1]; + + priv->init_voltage = fdtdec_get_int(blob, node, + "regulator-init-microvolt", -1); + if (priv->init_voltage < 0) { + printf("Cannot find regulator pwm init_voltage\n"); + return -EINVAL; + } + + ret = uclass_get_device_by_of_offset(UCLASS_PWM, args.node, &priv->pwm); + if (ret) { + debug("%s: Cannot get PWM: ret=%d\n", __func__, ret); + return ret; + } + + return 0; +} + +static int pwm_regulator_probe(struct udevice *dev) +{ + struct pwm_regulator_info *priv = dev_get_priv(dev); + struct dm_regulator_uclass_platdata *uc_pdata; + + uc_pdata = dev_get_uclass_platdata(dev); + + uc_pdata->type = REGULATOR_TYPE_BUCK; + uc_pdata->mode_count = 0; + priv->max_voltage = uc_pdata->max_uV; + priv->min_voltage = uc_pdata->min_uV; + + if (priv->init_voltage) + pwm_regulator_set_voltage(dev, priv->init_voltage); + + pwm_regulator_enable(dev, 1); + + return 0; +} + +static const struct dm_regulator_ops pwm_regulator_ops = { + .get_value = pwm_regulator_get_voltage, + .set_value = pwm_regulator_set_voltage, + .set_enable = pwm_regulator_enable, +}; + +static const struct udevice_id pwm_regulator_ids[] = { + { .compatible = "pwm-regulator" }, + { } +}; + +U_BOOT_DRIVER(pwm_regulator) = { + .name = "pwm_regulator", + .id = UCLASS_REGULATOR, + .ops = &pwm_regulator_ops, + .probe = pwm_regulator_probe, + .of_match = pwm_regulator_ids, + .ofdata_to_platdata = pwm_regulator_ofdata_to_platdata, + .priv_auto_alloc_size = sizeof(struct pwm_regulator_info), +}; diff --git a/include/configs/kylin_rk3036.h b/include/configs/kylin_rk3036.h index e8ca76dfcf..4f0bd84ad8 100644 --- a/include/configs/kylin_rk3036.h +++ b/include/configs/kylin_rk3036.h @@ -23,33 +23,6 @@ #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) #define CONFIG_SYS_REDUNDAND_ENVIRONMENT -/* Enable gpt partition table */ -#define CONFIG_CMD_GPT -#define CONFIG_RANDOM_UUID -#define PARTS_DEFAULT \ - "uuid_disk=${uuid_gpt_disk};" \ - "name=loader,start=32K,size=4000K,uuid=${uuid_gpt_loader};" \ - "name=reserved,size=64K,uuid=${uuid_gpt_reserved};" \ - "name=misc,size=4M,uuid=${uuid_gpt_misc};" \ - "name=recovery,size=32M,uuid=${uuid_gpt_recovery};" \ - "name=boot_a,size=32M,uuid=${uuid_gpt_boot_a};" \ - "name=boot_b,size=32M,uuid=${uuid_gpt_boot_b};" \ - "name=system_a,size=818M,uuid=${uuid_gpt_system_a};" \ - "name=system_b,size=818M,uuid=${uuid_gpt_system_b};" \ - "name=vendor_a,size=50M,uuid=${uuid_gpt_vendor_a};" \ - "name=vendor_b,size=50M,uuid=${uuid_gpt_vendor_b};" \ - "name=cache,size=100M,uuid=${uuid_gpt_cache};" \ - "name=metadata,size=16M,uuid=${uuid_gpt_metadata};" \ - "name=persist,size=4M,uuid=${uuid_gpt_persist};" \ - "name=userdata,size=-,uuid=${uuid_gpt_userdata};\0" \ - -#undef CONFIG_EXTRA_ENV_SETTINGS -#define CONFIG_EXTRA_ENV_SETTINGS \ - "partitions=" PARTS_DEFAULT \ - #endif -#define CONFIG_BOARD_LATE_INIT -#define CONFIG_PREBOOT - #endif diff --git a/include/configs/miniarm_rk3288.h b/include/configs/miniarm_rk3288.h index 390c243cae..aa259dbefd 100644 --- a/include/configs/miniarm_rk3288.h +++ b/include/configs/miniarm_rk3288.h @@ -10,8 +10,13 @@ #define ROCKCHIP_DEVICE_SETTINGS #include <configs/rk3288_common.h> +#undef BOOT_TARGET_DEVICES + +#define BOOT_TARGET_DEVICES(func) \ + func(MMC, mmc, 0) + #define CONFIG_ENV_IS_IN_MMC -#define CONFIG_SYS_MMC_ENV_DEV 1 +#define CONFIG_SYS_MMC_ENV_DEV 0 /* SPL @ 32k for ~36k * ENV @ 96k * u-boot @ 128K diff --git a/include/configs/rk3036_common.h b/include/configs/rk3036_common.h index 4b26662744..73830e4aa5 100644 --- a/include/configs/rk3036_common.h +++ b/include/configs/rk3036_common.h @@ -70,11 +70,18 @@ #define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR #define CONFIG_FASTBOOT_BUF_SIZE 0x08000000 +/* usb mass storage */ +#define CONFIG_USB_FUNCTION_MASS_STORAGE +#define CONFIG_CMD_USB_MASS_STORAGE + #define CONFIG_USB_GADGET_DOWNLOAD #define CONFIG_G_DNL_MANUFACTURER "Rockchip" #define CONFIG_G_DNL_VENDOR_NUM 0x2207 #define CONFIG_G_DNL_PRODUCT_NUM 0x310a +/* Enable gpt partition table */ +#define CONFIG_CMD_GPT + #include <config_distro_defaults.h> #define ENV_MEM_LAYOUT_SETTINGS \ @@ -84,6 +91,12 @@ "kernel_addr_r=0x62000000\0" \ "ramdisk_addr_r=0x64000000\0" +#define CONFIG_RANDOM_UUID +#define PARTS_DEFAULT \ + "uuid_disk=${uuid_gpt_disk};" \ + "name=boot,start=8M,size=64M,bootable,uuid=${uuid_gpt_boot};" \ + "name=rootfs,size=-,uuid=${uuid_gpt_rootfs};\0" \ + /* First try to boot from SD (index 0), then eMMC (index 1 */ #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 0) \ @@ -95,8 +108,12 @@ * so limit the fdt reallocation to that */ #define CONFIG_EXTRA_ENV_SETTINGS \ "fdt_high=0x7fffffff\0" \ + "partitions=" PARTS_DEFAULT \ ENV_MEM_LAYOUT_SETTINGS \ BOOTENV #endif +#define CONFIG_BOARD_LATE_INIT +#define CONFIG_PREBOOT + #endif diff --git a/include/configs/rk3288_common.h b/include/configs/rk3288_common.h index e8bf9878f2..9ddfe1daeb 100644 --- a/include/configs/rk3288_common.h +++ b/include/configs/rk3288_common.h @@ -132,4 +132,7 @@ BOOTENV #endif +#define CONFIG_BOARD_LATE_INIT +#define CONFIG_PREBOOT + #endif diff --git a/include/configs/rock2.h b/include/configs/rock2.h index ee924c3816..99d69155d2 100644 --- a/include/configs/rock2.h +++ b/include/configs/rock2.h @@ -16,11 +16,20 @@ #define CONFIG_ENV_IS_IN_MMC #define CONFIG_SYS_MMC_ENV_DEV 0 + +#ifdef CONFIG_ROCKCHIP_SPL_BACK_TO_BROM +/* SPL @ 32k for 34k + * u-boot directly after @ 68k for 400k or so + * ENV @ 992k + */ +#define CONFIG_ENV_OFFSET ((1024-32) * 1024) +#else /* SPL @ 32k for ~36k * ENV @ 96k * u-boot @ 128K */ #define CONFIG_ENV_OFFSET (96 * 1024) +#endif #define CONFIG_SYS_WHITE_ON_BLACK #define CONFIG_CONSOLE_SCROLL_LINES 10 |