summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/arm/dts/exynos4.dtsi27
-rw-r--r--arch/arm/dts/exynos4210-universal_c210.dts164
-rw-r--r--arch/arm/dts/s5pc1xx-goni.dts2
-rw-r--r--board/samsung/common/exynos5-dt.c8
-rw-r--r--board/samsung/goni/goni.c61
-rw-r--r--board/samsung/universal_c210/universal.c180
-rw-r--r--configs/arndale_defconfig2
-rw-r--r--configs/peach-pi_defconfig1
-rw-r--r--configs/peach-pit_defconfig1
-rw-r--r--configs/s5pc210_universal_defconfig3
-rw-r--r--configs/smdk5250_defconfig2
-rw-r--r--configs/snow_defconfig3
-rw-r--r--configs/spring_defconfig3
-rw-r--r--drivers/i2c/Kconfig5
-rw-r--r--drivers/i2c/s3c24x0_i2c.c8
-rw-r--r--include/configs/exynos5250-common.h2
16 files changed, 338 insertions, 134 deletions
diff --git a/arch/arm/dts/exynos4.dtsi b/arch/arm/dts/exynos4.dtsi
index 7de227cc01..a5a00c8fd4 100644
--- a/arch/arm/dts/exynos4.dtsi
+++ b/arch/arm/dts/exynos4.dtsi
@@ -10,6 +10,17 @@
#include "skeleton.dtsi"
/ {
+ aliases {
+ i2c0 = &i2c_0;
+ i2c1 = &i2c_1;
+ i2c2 = &i2c_2;
+ i2c3 = &i2c_3;
+ i2c4 = &i2c_4;
+ i2c5 = &i2c_5;
+ i2c6 = &i2c_6;
+ i2c7 = &i2c_7;
+ };
+
combiner: interrupt-controller@10440000 {
compatible = "samsung,exynos4210-combiner";
#interrupt-cells = <2>;
@@ -47,7 +58,7 @@
id = <4>;
};
- i2c@13860000 {
+ i2c_0: i2c@13860000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
@@ -55,7 +66,7 @@
interrupts = <0 56 0>;
};
- i2c@13870000 {
+ i2c_1: i2c@13870000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
@@ -63,7 +74,7 @@
interrupts = <1 57 0>;
};
- i2c@13880000 {
+ i2c_2: i2c@13880000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
@@ -71,7 +82,7 @@
interrupts = <2 58 0>;
};
- i2c@13890000 {
+ i2c_3: i2c@13890000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
@@ -79,7 +90,7 @@
interrupts = <3 59 0>;
};
- i2c@138a0000 {
+ i2c_4: i2c@138a0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
@@ -87,7 +98,7 @@
interrupts = <4 60 0>;
};
- i2c@138b0000 {
+ i2c_5: i2c@138b0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
@@ -95,7 +106,7 @@
interrupts = <5 61 0>;
};
- i2c@138c0000 {
+ i2c_6: i2c@138c0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
@@ -103,7 +114,7 @@
interrupts = <6 62 0>;
};
- i2c@138d0000 {
+ i2c_7: i2c@138d0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
diff --git a/arch/arm/dts/exynos4210-universal_c210.dts b/arch/arm/dts/exynos4210-universal_c210.dts
index 8cac7dd752..57636276a8 100644
--- a/arch/arm/dts/exynos4210-universal_c210.dts
+++ b/arch/arm/dts/exynos4210-universal_c210.dts
@@ -94,3 +94,167 @@
samsung,rgb-mode = <0>;
};
};
+
+&i2c_5 {
+ clock-frequency = <100000>;
+ status = "okay";
+
+ max8998-pmic@66 {
+ compatible = "maxim,max8998";
+ reg = <0x66 0 0>;
+ voltage-regulators {
+ ldo2_reg: LDO2 {
+ regulator-name = "VALIVE_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "VUSB+MIPI_1.1V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ ldo4_reg: LDO4 {
+ regulator-name = "VADC_3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo5_reg: LDO5 {
+ regulator-name = "VTF_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "LDO6";
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "VLCD+VMIPI_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "VUSB+VDAC_3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ ldo9_reg: LDO9 {
+ regulator-name = "VCC_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "VPLL_1.1V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo11_reg: LDO11 {
+ regulator-name = "CAM_AF_3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "PS_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo13_reg: LDO13 {
+ regulator-name = "VHIC_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ ldo14_reg: LDO14 {
+ regulator-name = "CAM_I_HOST_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "CAM_S_DIG+FM33_CORE_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "CAM_S_ANA_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo17_reg: LDO17 {
+ regulator-name = "VCC_3.0V_LCD";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "VINT_1.1V";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "VG3D_1.1V";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "VCC_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "VMEM_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ ap32khz_reg: EN32KHz-AP {
+ regulator-name = "32KHz AP";
+ regulator-always-on;
+ };
+
+ cp32khz_reg: EN32KHz-CP {
+ regulator-name = "32KHz CP";
+ };
+
+ vichg_reg: ENVICHG {
+ regulator-name = "VICHG";
+ };
+
+ safeout1_reg: ESAFEOUT1 {
+ regulator-name = "SAFEOUT1";
+ };
+
+ safeout2_reg: ESAFEOUT2 {
+ regulator-name = "SAFEOUT2";
+ regulator-boot-on;
+ };
+ };
+ };
+};
diff --git a/arch/arm/dts/s5pc1xx-goni.dts b/arch/arm/dts/s5pc1xx-goni.dts
index e80132dd99..182325a091 100644
--- a/arch/arm/dts/s5pc1xx-goni.dts
+++ b/arch/arm/dts/s5pc1xx-goni.dts
@@ -42,7 +42,7 @@
#size-cells = <0>;
status = "okay";
- pmic@66 {
+ max8998-pmic@66 {
compatible = "maxim,max8998";
reg = <0x66 0 0>;
diff --git a/board/samsung/common/exynos5-dt.c b/board/samsung/common/exynos5-dt.c
index 2e3b16df45..aec1f396b0 100644
--- a/board/samsung/common/exynos5-dt.c
+++ b/board/samsung/common/exynos5-dt.c
@@ -123,13 +123,7 @@ int exynos_power_init(void)
if (ret)
return ret;
- /*
- * This would normally be 1.3V, but since we are running slowly 1.1V
- * is enough. For spring it helps reduce CPU temperature and avoid
- * hangs with the case open. 1.1V is minimum voltage borderline for
- * chained bootloaders.
- */
- ret = exynos_set_regulator("vdd_arm", 1100000);
+ ret = exynos_set_regulator("vdd_arm", 1300000);
if (ret)
return ret;
ret = exynos_set_regulator("vdd_int", 1012500);
diff --git a/board/samsung/goni/goni.c b/board/samsung/goni/goni.c
index b066832e5f..9c48d71a67 100644
--- a/board/samsung/goni/goni.c
+++ b/board/samsung/goni/goni.c
@@ -9,6 +9,7 @@
#include <common.h>
#include <asm/gpio.h>
#include <asm/arch/mmc.h>
+#include <dm.h>
#include <power/pmic.h>
#include <usb/dwc2_udc.h>
#include <asm/arch/cpu.h>
@@ -43,19 +44,6 @@ void i2c_init_board(void)
}
#endif
-int power_init_board(void)
-{
-#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */
- /*
- * For PMIC the I2C bus is named as I2C5, but it is connected
- * to logical I2C adapter 0
- */
- return pmic_init(I2C_0);
-#else
- return 0;
-#endif
-}
-
int dram_init(void)
{
gd->ram_size = PHYS_SDRAM_1_SIZE + PHYS_SDRAM_2_SIZE +
@@ -146,39 +134,50 @@ int board_mmc_init(bd_t *bis)
#ifdef CONFIG_USB_GADGET
static int s5pc1xx_phy_control(int on)
{
-#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */
- int ret;
+ struct udevice *dev;
static int status;
- struct pmic *p = pmic_get("MAX8998_PMIC");
- if (!p)
- return -ENODEV;
+ int reg, ret;
- if (pmic_probe(p))
- return -1;
+ ret = pmic_get("max8998-pmic", &dev);
+ if (ret)
+ return ret;
if (on && !status) {
- ret = pmic_set_output(p, MAX8998_REG_ONOFF1,
- MAX8998_LDO3, LDO_ON);
- ret = pmic_set_output(p, MAX8998_REG_ONOFF2,
- MAX8998_LDO8, LDO_ON);
+ reg = pmic_reg_read(dev, MAX8998_REG_ONOFF1);
+ reg |= MAX8998_LDO3;
+ ret = pmic_reg_write(dev, MAX8998_REG_ONOFF1, reg);
if (ret) {
puts("MAX8998 LDO setting error!\n");
- return -1;
+ return -EINVAL;
+ }
+
+ reg = pmic_reg_read(dev, MAX8998_REG_ONOFF2);
+ reg |= MAX8998_LDO8;
+ ret = pmic_reg_write(dev, MAX8998_REG_ONOFF2, reg);
+ if (ret) {
+ puts("MAX8998 LDO setting error!\n");
+ return -EINVAL;
}
status = 1;
} else if (!on && status) {
- ret = pmic_set_output(p, MAX8998_REG_ONOFF1,
- MAX8998_LDO3, LDO_OFF);
- ret = pmic_set_output(p, MAX8998_REG_ONOFF2,
- MAX8998_LDO8, LDO_OFF);
+ reg = pmic_reg_read(dev, MAX8998_REG_ONOFF1);
+ reg &= ~MAX8998_LDO3;
+ ret = pmic_reg_write(dev, MAX8998_REG_ONOFF1, reg);
+ if (ret) {
+ puts("MAX8998 LDO setting error!\n");
+ return -EINVAL;
+ }
+
+ reg = pmic_reg_read(dev, MAX8998_REG_ONOFF2);
+ reg &= ~MAX8998_LDO8;
+ ret = pmic_reg_write(dev, MAX8998_REG_ONOFF2, reg);
if (ret) {
puts("MAX8998 LDO setting error!\n");
- return -1;
+ return -EINVAL;
}
status = 0;
}
udelay(10000);
-#endif
return 0;
}
diff --git a/board/samsung/universal_c210/universal.c b/board/samsung/universal_c210/universal.c
index c3946ee891..feb8a341be 100644
--- a/board/samsung/universal_c210/universal.c
+++ b/board/samsung/universal_c210/universal.c
@@ -27,33 +27,21 @@
DECLARE_GLOBAL_DATA_PTR;
unsigned int board_rev;
+static int init_pmic_lcd(void);
u32 get_board_rev(void)
{
return board_rev;
}
-static int get_hwrev(void)
+int exynos_power_init(void)
{
- return board_rev & 0xFF;
+ return init_pmic_lcd();
}
-int exynos_power_init(void)
+static int get_hwrev(void)
{
-#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */
- int ret;
-
- /*
- * For PMIC the I2C bus is named as I2C5, but it is connected
- * to logical I2C adapter 0
- */
- ret = pmic_init(I2C_0);
- if (ret)
- return ret;
-
- init_pmic_lcd();
-#endif
- return 0;
+ return board_rev & 0xFF;
}
static unsigned short get_adc_value(int channel)
@@ -83,23 +71,29 @@ static unsigned short get_adc_value(int channel)
static int adc_power_control(int on)
{
-#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */
+ struct udevice *dev;
int ret;
- struct pmic *p = pmic_get("MAX8998_PMIC");
- if (!p)
- return -ENODEV;
+ u8 reg;
- if (pmic_probe(p))
- return -1;
+ ret = pmic_get("max8998-pmic", &dev);
+ if (ret) {
+ puts("Failed to get MAX8998!\n");
+ return ret;
+ }
- ret = pmic_set_output(p,
- MAX8998_REG_ONOFF1,
- MAX8998_LDO4, !!on);
+ reg = pmic_reg_read(dev, MAX8998_REG_ONOFF1);
+ if (on)
+ reg |= MAX8998_LDO4;
+ else
+ reg &= ~MAX8998_LDO4;
+
+ ret = pmic_reg_write(dev, MAX8998_REG_ONOFF1, reg);
+ if (ret) {
+ puts("MAX8998 LDO setting error\n");
+ return -EINVAL;
+ }
- return ret;
-#else
return 0;
-#endif
}
static unsigned int get_hw_revision(void)
@@ -147,39 +141,50 @@ static void check_hw_revision(void)
#ifdef CONFIG_USB_GADGET
static int s5pc210_phy_control(int on)
{
-#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */
- int ret = 0;
- struct pmic *p = pmic_get("MAX8998_PMIC");
- if (!p)
- return -ENODEV;
+ struct udevice *dev;
+ int ret;
+ u8 reg;
- if (pmic_probe(p))
- return -1;
+ ret = pmic_get("max8998-pmic", &dev);
+ if (ret) {
+ puts("Failed to get MAX8998!\n");
+ return ret;
+ }
if (on) {
- ret |= pmic_set_output(p,
- MAX8998_REG_BUCK_ACTIVE_DISCHARGE3,
- MAX8998_SAFEOUT1, LDO_ON);
- ret |= pmic_set_output(p, MAX8998_REG_ONOFF1,
- MAX8998_LDO3, LDO_ON);
- ret |= pmic_set_output(p, MAX8998_REG_ONOFF2,
- MAX8998_LDO8, LDO_ON);
+ reg = pmic_reg_read(dev, MAX8998_REG_BUCK_ACTIVE_DISCHARGE3);
+ reg |= MAX8998_SAFEOUT1;
+ ret |= pmic_reg_write(dev,
+ MAX8998_REG_BUCK_ACTIVE_DISCHARGE3, reg);
+
+ reg = pmic_reg_read(dev, MAX8998_REG_ONOFF1);
+ reg |= MAX8998_LDO3;
+ ret |= pmic_reg_write(dev, MAX8998_REG_ONOFF1, reg);
+
+ reg = pmic_reg_read(dev, MAX8998_REG_ONOFF2);
+ reg |= MAX8998_LDO8;
+ ret |= pmic_reg_write(dev, MAX8998_REG_ONOFF2, reg);
} else {
- ret |= pmic_set_output(p, MAX8998_REG_ONOFF2,
- MAX8998_LDO8, LDO_OFF);
- ret |= pmic_set_output(p, MAX8998_REG_ONOFF1,
- MAX8998_LDO3, LDO_OFF);
- ret |= pmic_set_output(p,
- MAX8998_REG_BUCK_ACTIVE_DISCHARGE3,
- MAX8998_SAFEOUT1, LDO_OFF);
+ reg = pmic_reg_read(dev, MAX8998_REG_ONOFF2);
+ reg &= ~MAX8998_LDO8;
+ ret |= pmic_reg_write(dev, MAX8998_REG_ONOFF2, reg);
+
+ reg = pmic_reg_read(dev, MAX8998_REG_ONOFF1);
+ reg &= ~MAX8998_LDO3;
+ ret |= pmic_reg_write(dev, MAX8998_REG_ONOFF1, reg);
+
+ reg = pmic_reg_read(dev, MAX8998_REG_BUCK_ACTIVE_DISCHARGE3);
+ reg &= ~MAX8998_SAFEOUT1;
+ ret |= pmic_reg_write(dev,
+ MAX8998_REG_BUCK_ACTIVE_DISCHARGE3, reg);
}
if (ret) {
puts("MAX8998 LDO setting error!\n");
- return -1;
+ return -EINVAL;
}
-#endif
+
return 0;
}
@@ -205,27 +210,25 @@ int exynos_early_init_f(void)
return 0;
}
-#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */
-static void init_pmic_lcd(void)
+static int init_pmic_lcd(void)
{
+ struct udevice *dev;
unsigned char val;
int ret = 0;
- struct pmic *p = pmic_get("MAX8998_PMIC");
-
- if (!p)
- return;
-
- if (pmic_probe(p))
- return;
+ ret = pmic_get("max8998-pmic", &dev);
+ if (ret) {
+ puts("Failed to get MAX8998 for init_pmic_lcd()!\n");
+ return ret;
+ }
/* LDO7 1.8V */
val = 0x02; /* (1800 - 1600) / 100; */
- ret |= pmic_reg_write(p, MAX8998_REG_LDO7, val);
+ ret |= pmic_reg_write(dev, MAX8998_REG_LDO7, val);
/* LDO17 3.0V */
val = 0xe; /* (3000 - 1600) / 100; */
- ret |= pmic_reg_write(p, MAX8998_REG_LDO17, val);
+ ret |= pmic_reg_write(dev, MAX8998_REG_LDO17, val);
/* Disable unneeded regulators */
/*
@@ -234,26 +237,29 @@ static void init_pmic_lcd(void)
* LDO2 ON, LDO3 OFF, LDO4 OFF, LDO5 ON
*/
val = 0xB9;
- ret |= pmic_reg_write(p, MAX8998_REG_ONOFF1, val);
+ ret |= pmic_reg_write(dev, MAX8998_REG_ONOFF1, val);
/* ONOFF2
* LDO6 OFF, LDO7 ON, LDO8 OFF, LDO9 ON,
* LDO10 OFF, LDO11 OFF, LDO12 OFF, LDO13 OFF
*/
val = 0x50;
- ret |= pmic_reg_write(p, MAX8998_REG_ONOFF2, val);
+ ret |= pmic_reg_write(dev, MAX8998_REG_ONOFF2, val);
/* ONOFF3
* LDO14 OFF, LDO15 OFF, LGO16 OFF, LDO17 OFF
* EPWRHOLD OFF, EBATTMON OFF, ELBCNFG2 OFF, ELBCNFG1 OFF
*/
val = 0x00;
- ret |= pmic_reg_write(p, MAX8998_REG_ONOFF3, val);
+ ret |= pmic_reg_write(dev, MAX8998_REG_ONOFF3, val);
- if (ret)
+ if (ret) {
puts("LCD pmic initialisation error!\n");
+ return -EINVAL;
+ }
+
+ return 0;
}
-#endif
void exynos_cfg_lcd_gpio(void)
{
@@ -310,18 +316,31 @@ void exynos_reset_lcd(void)
void exynos_lcd_power_on(void)
{
-#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */
- struct pmic *p = pmic_get("MAX8998_PMIC");
+ struct udevice *dev;
+ int ret;
+ u8 reg;
- if (!p)
+ ret = pmic_get("max8998-pmic", &dev);
+ if (ret) {
+ puts("Failed to get MAX8998!\n");
return;
+ }
- if (pmic_probe(p))
+ reg = pmic_reg_read(dev, MAX8998_REG_ONOFF3);
+ reg |= MAX8998_LDO17;
+ ret = pmic_reg_write(dev, MAX8998_REG_ONOFF3, reg);
+ if (ret) {
+ puts("MAX8998 LDO setting error\n");
return;
+ }
- pmic_set_output(p, MAX8998_REG_ONOFF3, MAX8998_LDO17, LDO_ON);
- pmic_set_output(p, MAX8998_REG_ONOFF2, MAX8998_LDO7, LDO_ON);
-#endif
+ reg = pmic_reg_read(dev, MAX8998_REG_ONOFF2);
+ reg |= MAX8998_LDO7;
+ ret = pmic_reg_write(dev, MAX8998_REG_ONOFF2, reg);
+ if (ret) {
+ puts("MAX8998 LDO setting error\n");
+ return;
+ }
}
void exynos_cfg_ldo(void)
@@ -336,9 +355,6 @@ void exynos_enable_ldo(unsigned int onoff)
int exynos_init(void)
{
-#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */
- char buf[16];
-#endif
gd->bd->bi_arch_number = MACH_TYPE_UNIVERSAL_C210;
switch (get_hwrev()) {
@@ -363,14 +379,6 @@ int exynos_init(void)
break;
}
-#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */
- /* Request soft I2C gpios */
- strcpy(buf, "soft_i2c_scl");
- gpio_request(CONFIG_SOFT_I2C_GPIO_SCL, buf);
-
- strcpy(buf, "soft_i2c_sda");
- gpio_request(CONFIG_SOFT_I2C_GPIO_SDA, buf);
-#endif
check_hw_revision();
printf("HW Revision:\t0x%x\n", board_rev);
diff --git a/configs/arndale_defconfig b/configs/arndale_defconfig
index 2298def33d..a2cde44386 100644
--- a/configs/arndale_defconfig
+++ b/configs/arndale_defconfig
@@ -32,4 +32,6 @@ CONFIG_SOUND_MAX98095=y
CONFIG_SOUND_WM8994=y
CONFIG_USB=y
CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_STORAGE=y
diff --git a/configs/peach-pi_defconfig b/configs/peach-pi_defconfig
index 42b9f258b0..440cbcca0c 100644
--- a/configs/peach-pi_defconfig
+++ b/configs/peach-pi_defconfig
@@ -61,5 +61,6 @@ CONFIG_DISPLAY=y
CONFIG_VIDEO_BRIDGE=y
CONFIG_VIDEO_BRIDGE_PARADE_PS862X=y
CONFIG_LCD=y
+CONFIG_VIDCONSOLE_AS_LCD=y
CONFIG_TPM=y
CONFIG_ERRNO_STR=y
diff --git a/configs/peach-pit_defconfig b/configs/peach-pit_defconfig
index 7b4ebfe77f..d12e1a9d5e 100644
--- a/configs/peach-pit_defconfig
+++ b/configs/peach-pit_defconfig
@@ -61,5 +61,6 @@ CONFIG_DISPLAY=y
CONFIG_VIDEO_BRIDGE=y
CONFIG_VIDEO_BRIDGE_PARADE_PS862X=y
CONFIG_LCD=y
+CONFIG_VIDCONSOLE_AS_LCD=y
CONFIG_TPM=y
CONFIG_ERRNO_STR=y
diff --git a/configs/s5pc210_universal_defconfig b/configs/s5pc210_universal_defconfig
index fad2b43ba2..d9dfcba83d 100644
--- a/configs/s5pc210_universal_defconfig
+++ b/configs/s5pc210_universal_defconfig
@@ -33,6 +33,9 @@ CONFIG_MMC_DW=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_SDMA=y
CONFIG_MMC_SDHCI_S5P=y
+CONFIG_DM_PMIC=y
+CONFIG_DM_PMIC_MAX8998=y
+CONFIG_SYS_I2C_S3C24X0=y
CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_USB_GADGET=y
diff --git a/configs/smdk5250_defconfig b/configs/smdk5250_defconfig
index 4ef41437a2..a34f915d55 100644
--- a/configs/smdk5250_defconfig
+++ b/configs/smdk5250_defconfig
@@ -44,6 +44,8 @@ CONFIG_SOUND_WM8994=y
CONFIG_EXYNOS_SPI=y
CONFIG_USB=y
CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_STORAGE=y
CONFIG_VIDEO_BRIDGE=y
CONFIG_ERRNO_STR=y
diff --git a/configs/snow_defconfig b/configs/snow_defconfig
index ef3cfa1519..2ef3774041 100644
--- a/configs/snow_defconfig
+++ b/configs/snow_defconfig
@@ -62,6 +62,8 @@ CONFIG_EXYNOS_SPI=y
CONFIG_TPM_TIS_INFINEON=y
CONFIG_USB=y
CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_STORAGE=y
CONFIG_DM_VIDEO=y
CONFIG_DISPLAY=y
@@ -69,5 +71,6 @@ CONFIG_VIDEO_BRIDGE=y
CONFIG_VIDEO_BRIDGE_PARADE_PS862X=y
CONFIG_VIDEO_BRIDGE_NXP_PTN3460=y
CONFIG_LCD=y
+CONFIG_VIDCONSOLE_AS_LCD=y
CONFIG_TPM=y
CONFIG_ERRNO_STR=y
diff --git a/configs/spring_defconfig b/configs/spring_defconfig
index 3bd8644276..243a9ec540 100644
--- a/configs/spring_defconfig
+++ b/configs/spring_defconfig
@@ -62,11 +62,14 @@ CONFIG_EXYNOS_SPI=y
CONFIG_TPM_TIS_INFINEON=y
CONFIG_USB=y
CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_STORAGE=y
CONFIG_DM_VIDEO=y
CONFIG_DISPLAY=y
CONFIG_VIDEO_BRIDGE=y
CONFIG_VIDEO_BRIDGE_PARADE_PS862X=y
CONFIG_LCD=y
+CONFIG_VIDCONSOLE_AS_LCD=y
CONFIG_TPM=y
CONFIG_ERRNO_STR=y
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 051f911e23..71cc173fc0 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -155,6 +155,11 @@ config SYS_I2C_SANDBOX
};
};
+config SYS_I2C_S3C24X0
+ bool "Samsung I2C driver"
+ depends on ARCH_EXYNOS4 && DM_I2C
+ help
+ Support for Samsung I2C controller as Samsung SoCs.
config SYS_I2C_UNIPHIER
bool "UniPhier I2C driver"
diff --git a/drivers/i2c/s3c24x0_i2c.c b/drivers/i2c/s3c24x0_i2c.c
index 2ece9f4195..363cd04e4e 100644
--- a/drivers/i2c/s3c24x0_i2c.c
+++ b/drivers/i2c/s3c24x0_i2c.c
@@ -24,6 +24,12 @@
#include <i2c.h>
#include "s3c24x0_i2c.h"
+#ifndef CONFIG_SYS_I2C_S3C24X0_SLAVE
+#define SYS_I2C_S3C24X0_SLAVE_ADDR 0
+#else
+#define SYS_I2C_S3C24X0_SLAVE_ADDR CONFIG_SYS_I2C_S3C24X0_SLAVE
+#endif
+
DECLARE_GLOBAL_DATA_PTR;
/*
@@ -87,7 +93,7 @@ static int s3c24x0_i2c_set_bus_speed(struct udevice *dev, unsigned int speed)
i2c_bus->clock_frequency = speed;
i2c_ch_init(i2c_bus->regs, i2c_bus->clock_frequency,
- CONFIG_SYS_I2C_S3C24X0_SLAVE);
+ SYS_I2C_S3C24X0_SLAVE_ADDR);
return 0;
}
diff --git a/include/configs/exynos5250-common.h b/include/configs/exynos5250-common.h
index 7d8921f24e..846739a6c5 100644
--- a/include/configs/exynos5250-common.h
+++ b/include/configs/exynos5250-common.h
@@ -31,6 +31,8 @@
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_EXYNOS
+#define CONFIG_USB_XHCI_EXYNOS
+
#define CONFIG_USB_HOST_ETHER
#define CONFIG_USB_ETHER_ASIX
#define CONFIG_USB_ETHER_ASIX88179
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-28 09:55:26 +0000