diff options
| -rw-r--r-- | drivers/block/ahci.c | 98 |
1 files changed, 69 insertions, 29 deletions
diff --git a/drivers/block/ahci.c b/drivers/block/ahci.c index 7b2ec505e1..d94da1f05a 100644 --- a/drivers/block/ahci.c +++ b/drivers/block/ahci.c @@ -42,6 +42,14 @@ hd_driveid_t *ataid[AHCI_MAX_PORTS]; #define writel_with_flush(a,b) do { writel(a,b); readl(b); } while (0) +/* + * Some controllers limit number of blocks they can read at once. Contemporary + * SSD devices work much faster if the read size is aligned to a power of 2. + * Let's set default to 128 and allowing to be overwritten if needed. + */ +#ifndef MAX_SATA_BLOCKS_READ +#define MAX_SATA_BLOCKS_READ 0x80 +#endif static inline u32 ahci_port_base(u32 base, u32 port) { @@ -88,6 +96,8 @@ static int ahci_host_init(struct ahci_probe_ent *probe_ent) int i, j; volatile u8 *port_mmio; + debug("ahci_host_init: start\n"); + cap_save = readl(mmio + HOST_CAP); cap_save &= ((1 << 28) | (1 << 17)); cap_save |= (1 << 27); @@ -129,6 +139,9 @@ static int ahci_host_init(struct ahci_probe_ent *probe_ent) debug("cap 0x%x port_map 0x%x n_ports %d\n", probe_ent->cap, probe_ent->port_map, probe_ent->n_ports); + if (probe_ent->n_ports > CONFIG_SYS_SCSI_MAX_SCSI_ID) + probe_ent->n_ports = CONFIG_SYS_SCSI_MAX_SCSI_ID; + for (i = 0; i < probe_ent->n_ports; i++) { probe_ent->port[i].port_mmio = ahci_port_base((u32) mmio, i); port_mmio = (u8 *) probe_ent->port[i].port_mmio; @@ -277,8 +290,8 @@ static int ahci_init_one(pci_dev_t pdev) probe_ent->pio_mask = 0x1f; probe_ent->udma_mask = 0x7f; /*Fixme,assume to support UDMA6 */ - probe_ent->mmio_base = (u32)pci_map_bar(pdev, AHCI_PCI_BAR, - PCI_REGION_MEM); + pci_read_config_dword(pdev, PCI_BASE_ADDRESS_5, &probe_ent->mmio_base); + debug("ahci mmio_base=0x%08x\n", probe_ent->mmio_base); /* Take from kernel: * JMicron-specific fixup: @@ -398,7 +411,7 @@ static int ahci_port_start(u8 port) * 32 bytes each in size */ pp->cmd_slot = (struct ahci_cmd_hdr *)mem; - debug("cmd_slot = %p\n", pp->cmd_slot); + debug("cmd_slot = 0x%x\n", (unsigned)pp->cmd_slot); mem += (AHCI_CMD_SLOT_SZ + 224); /* @@ -561,42 +574,69 @@ static int ata_scsiop_inquiry(ccb *pccb) */ static int ata_scsiop_read10(ccb * pccb) { - u32 len = 0; + u32 lba = 0; + u16 blocks = 0; u8 fis[20]; + u8 *user_buffer = pccb->pdata; + u32 user_buffer_size = pccb->datalen; - len = (((u32) pccb->cmd[7]) << 8) | ((u32) pccb->cmd[8]); + /* Retrieve the base LBA number from the ccb structure. */ + memcpy(&lba, pccb->cmd + 2, sizeof(lba)); + lba = be32_to_cpu(lba); - /* For 10-byte and 16-byte SCSI R/W commands, transfer + /* + * And the number of blocks. + * + * For 10-byte and 16-byte SCSI R/W commands, transfer * length 0 means transfer 0 block of data. * However, for ATA R/W commands, sector count 0 means * 256 or 65536 sectors, not 0 sectors as in SCSI. * * WARNING: one or two older ATA drives treat 0 as 0... */ - if (!len) - return 0; + blocks = (((u16)pccb->cmd[7]) << 8) | ((u16) pccb->cmd[8]); + + debug("scsi_ahci: read %d blocks starting from lba 0x%x\n", + (unsigned)lba, blocks); + + /* Preset the FIS */ memset(fis, 0, 20); + fis[0] = 0x27; /* Host to device FIS. */ + fis[1] = 1 << 7; /* Command FIS. */ + fis[2] = ATA_CMD_RD_DMA; /* Command byte. */ - /* Construct the FIS */ - fis[0] = 0x27; /* Host to device FIS. */ - fis[1] = 1 << 7; /* Command FIS. */ - fis[2] = ATA_CMD_RD_DMA; /* Command byte. */ - - /* LBA address, only support LBA28 in this driver */ - fis[4] = pccb->cmd[5]; - fis[5] = pccb->cmd[4]; - fis[6] = pccb->cmd[3]; - fis[7] = (pccb->cmd[2] & 0x0f) | 0xe0; - - /* Sector Count */ - fis[12] = pccb->cmd[8]; - fis[13] = pccb->cmd[7]; - - /* Read from ahci */ - if (get_ahci_device_data(pccb->target, (u8 *) & fis, 20, - pccb->pdata, pccb->datalen)) { - debug("scsi_ahci: SCSI READ10 command failure.\n"); - return -EIO; + while (blocks) { + u16 now_blocks; /* number of blocks per iteration */ + u32 transfer_size; /* number of bytes per iteration */ + + now_blocks = min(MAX_SATA_BLOCKS_READ, blocks); + + transfer_size = ATA_BLOCKSIZE * now_blocks; + if (transfer_size > user_buffer_size) { + printf("scsi_ahci: Error: buffer too small.\n"); + return -EIO; + } + + /* LBA address, only support LBA28 in this driver */ + fis[4] = (lba >> 0) & 0xff; + fis[5] = (lba >> 8) & 0xff; + fis[6] = (lba >> 16) & 0xff; + fis[7] = ((lba >> 24) & 0xf) | 0xe0; + + /* Block (sector) count */ + fis[12] = (now_blocks >> 0) & 0xff; + fis[13] = (now_blocks >> 8) & 0xff; + + /* Read from ahci */ + if (get_ahci_device_data(pccb->target, (u8 *) &fis, sizeof(fis), + user_buffer, user_buffer_size)) { + debug("scsi_ahci: SCSI READ10 command failure.\n"); + return -EIO; + } + user_buffer += transfer_size; + user_buffer_size -= transfer_size; + blocks -= now_blocks; + lba += now_blocks; } return 0; @@ -617,7 +657,7 @@ static int ata_scsiop_read_capacity10(ccb *pccb) return -EPERM; } - cap = le32_to_cpu(ataid[pccb->target]->lba_capacity); + cap = be32_to_cpu(ataid[pccb->target]->lba_capacity); memcpy(pccb->pdata, &cap, sizeof(cap)); pccb->pdata[4] = pccb->pdata[5] = 0; |