diff options
-rw-r--r-- | board/netstal/hcu4/hcu4.c | 20 | ||||
-rw-r--r-- | board/netstal/hcu5/hcu5.c | 69 |
2 files changed, 60 insertions, 29 deletions
diff --git a/board/netstal/hcu4/hcu4.c b/board/netstal/hcu4/hcu4.c index 2b9560484d..48a3f13bad 100644 --- a/board/netstal/hcu4/hcu4.c +++ b/board/netstal/hcu4/hcu4.c @@ -43,7 +43,7 @@ enum { HW_GENERATION_MCU25 = 0x09, }; -void sysLedSet(u32 value); +void hcu_led_set(u32 value); long int spd_sdram(int(read_spd)(uint addr)); #ifdef CONFIG_SPD_EEPROM @@ -121,22 +121,24 @@ int checkboard (void) printf ("HCU3: index %d\n\n", index); else if (generation == HW_GENERATION_HCU4) printf ("HCU4: index %d\n\n", index); - /* GPIO here noch nicht richtig initialisert !!! */ - sysLedSet(0); + hcu_led_set(0); for (j = 0; j < 7; j++) { - sysLedSet(1 << j); + hcu_led_set(1 << j); udelay(50 * 1000); } return 0; } -u32 sysLedGet(void) +u32 hcu_led_get(void) { return (~((*(u32 *)GPIO0_OR)) >> 23) & 0xff; } -void sysLedSet(u32 value /* value to place in LEDs */) +/*---------------------------------------------------------------------------+ + * hcu_led_set value to be placed into the LEDs (max 6 bit) + *---------------------------------------------------------------------------*/ +void hcu_led_set(u32 value) { u32 tmp = ~value; u32 *ledReg; @@ -243,9 +245,9 @@ long int fixed_hcu4_sdram (int board_type) } /*---------------------------------------------------------------------------+ - * getSerialNr + * hcu_serial_number *---------------------------------------------------------------------------*/ -static u32 getSerialNr(void) +static u32 hcu_serial_number(void) { u32 *serial = (u32 *)CFG_FLASH_BASE; @@ -265,7 +267,7 @@ int misc_init_r(void) char *s = getenv("ethaddr"); char *e; int i; - u32 serial = getSerialNr(); + u32 serial = hcu_serial_number(); for (i = 0; i < 6; ++i) { gd->bd->bi_enetaddr[i] = s ? simple_strtoul (s, &e, 16) : 0; diff --git a/board/netstal/hcu5/hcu5.c b/board/netstal/hcu5/hcu5.c index 23df0814ff..b9b10fdc29 100644 --- a/board/netstal/hcu5/hcu5.c +++ b/board/netstal/hcu5/hcu5.c @@ -22,10 +22,11 @@ #include <asm/processor.h> #include <ppc440.h> #include <asm/mmu.h> +#include <net.h> DECLARE_GLOBAL_DATA_PTR; -void sysLedSet(u32 value); +void hcu_led_set(u32 value); extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; @@ -41,7 +42,8 @@ extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; #define SDR0_ECID2 0x0082 #define SDR0_ECID3 0x0083 -#define SYS_IO_ADDRESS 0xcce00000 +#define SYS_IO_ADDRESS (CFG_CS_2 + 0x00e00000) +#define SYS_SLOT_ADDRESS (CFG_CPLD + 0x00400000) #define DEFAULT_ETH_ADDR "ethaddr" /* ethaddr for first or etha1ddr for second ethernet */ @@ -182,11 +184,14 @@ int board_early_init_f(void) return 0; } +#ifdef CONFIG_BOARD_PRE_INIT int board_pre_init(void) { return board_early_init_f(); } +#endif + int checkboard(void) { unsigned int j; @@ -211,38 +216,51 @@ int checkboard(void) printf("Chip ID 0x%x 0x%x 0x%x 0x%x\n", ecid0, ecid1, ecid2, ecid3); for (j = 0;j < 6; j++) { - sysLedSet(1 << j); + hcu_led_set(1 << j); udelay(200 * 1000); } return 0; } -u32 sysLedGet(void) +u32 hcu_led_get(void) { return in16(SYS_IO_ADDRESS) & 0x3f; } -void sysLedSet(u32 value /* value to place in LEDs */) +/*---------------------------------------------------------------------------+ + * hcu_led_set value to be placed into the LEDs (max 6 bit) + *---------------------------------------------------------------------------*/ +void hcu_led_set(u32 value) { out16(SYS_IO_ADDRESS, value); } /*---------------------------------------------------------------------------+ - * getSerialNr + * get_serial_number *---------------------------------------------------------------------------*/ -static u32 getSerialNr(void) +static u32 get_serial_number(void) { u32 *serial = (u32 *)CFG_FLASH_BASE; if (*serial == 0xffffffff) - return get_ticks(); + return 0; return *serial; } /*---------------------------------------------------------------------------+ + * hcu_get_slot + *---------------------------------------------------------------------------*/ +u32 hcu_get_slot(void) +{ + u16 *slot = (u16 *)SYS_SLOT_ADDRESS; + return (*slot) & 0x7f; +} + + +/*---------------------------------------------------------------------------+ * misc_init_r. *---------------------------------------------------------------------------*/ int misc_init_r(void) @@ -250,7 +268,7 @@ int misc_init_r(void) char *s = getenv(DEFAULT_ETH_ADDR); char *e; int i; - u32 serial = getSerialNr(); + u32 serial = get_serial_number(); unsigned long usb2d0cr = 0; unsigned long usb2phy0cr, usb2h0cr = 0; unsigned long sdr0_pfc1; @@ -272,8 +290,7 @@ int misc_init_r(void) gd->bd->bi_enetaddr[2] = 0x13; gd->bd->bi_enetaddr[3] = (serial >> 16) & 0xff; gd->bd->bi_enetaddr[4] = (serial >> 8) & 0xff; - /* byte[5].bit 0 must be zero */ - gd->bd->bi_enetaddr[5] = (serial >> 0) & 0xfe; + gd->bd->bi_enetaddr[5] = hcu_get_slot(); sprintf(ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X\0", gd->bd->bi_enetaddr[0], gd->bd->bi_enetaddr[1], gd->bd->bi_enetaddr[2], gd->bd->bi_enetaddr[3], @@ -283,6 +300,25 @@ int misc_init_r(void) setenv(DEFAULT_ETH_ADDR, ethaddr); } + /* IP-Adress update */ + { + IPaddr_t ipaddr; + char *ipstring; + + ipstring = getenv("ipaddr"); + if (ipstring == 0) + ipaddr = string_to_ip("172.25.1.99"); + else + ipaddr = string_to_ip(ipstring); + if ((ipaddr & 0xff) != (32 + hcu_get_slot())) { + char tmp[22]; + + ipaddr = (ipaddr & 0xffffff00) + 32 + hcu_get_slot(); + ip_to_string (ipaddr, tmp); + printf("%s: enforce %s\n", __FUNCTION__, tmp); + setenv("ipaddr", tmp); + } + } #ifdef CFG_ENV_IS_IN_FLASH /* Monitor protection ON by default */ (void)flash_protect(FLAG_PROTECT_SET, @@ -346,6 +382,7 @@ int misc_init_r(void) return 0; } +#if defined(CONFIG_PCI) /************************************************************************* * pci_pre_init * @@ -358,7 +395,6 @@ int misc_init_r(void) * certain pre-initialization actions. * ************************************************************************/ -#if defined(CONFIG_PCI) int pci_pre_init(struct pci_controller *hose) { unsigned long addr; @@ -411,7 +447,6 @@ int pci_pre_init(struct pci_controller *hose) return 1; } -#endif /* defined(CONFIG_PCI) */ /************************************************************************* * pci_target_init @@ -421,7 +456,6 @@ int pci_pre_init(struct pci_controller *hose) * may not be sufficient for a given board. * ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) void pci_target_init(struct pci_controller *hose) { /*-------------------------------------------------------------+ @@ -478,13 +512,11 @@ void pci_target_init(struct pci_controller *hose) pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101); } -#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */ /************************************************************************* * pci_master_init * ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) void pci_master_init(struct pci_controller *hose) { unsigned short temp_short; @@ -499,8 +531,6 @@ void pci_master_init(struct pci_controller *hose) temp_short | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY); } -#endif -/* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */ /************************************************************************* * is_pci_host @@ -517,9 +547,8 @@ void pci_master_init(struct pci_controller *hose) * * ************************************************************************/ -#if defined(CONFIG_PCI) int is_pci_host(struct pci_controller *hose) { return 1; } -#endif /* defined(CONFIG_PCI) */ +#endif /* defined(CONFIG_PCI) */ |