ppc4xx: Big cleanup of PPC4xx defines

This patch cleans up multiple issues of the 4xx register (mostly
DCR, SDR, CPR, etc) definitions:

- Change lower case defines to upper case (plb4_acr -> PLB4_ACR)
- Change the defines to better match the names from the
  user's manuals (e.g. cprpllc -> CPR0_PLLC)
- Removal of some unused defines

Please test this patch intensive on your PPC4xx platform. Even though
I tried not to break anything and tested successfully on multiple
4xx AMCC platforms, testing on custom platforms is recommended.

Signed-off-by: Stefan Roese <sr@denx.de>

2 files changed, 36 insertions, 36 deletions

diff --git a/post/cpu/ppc4xx/ether.c b/post/cpu/ppc4xx/ether.c
index e40e19be23..c3665da94a 100644
--- a/post/cpu/ppc4xx/ether.c
+++ b/post/cpu/ppc4xx/ether.c
@@ -109,9 +109,9 @@ static void ether_post_init (int devnum, int hw_addr)
 
 #if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
 	/* provide clocks for EMAC internal loopback  */
-	mfsdr (sdr_mfr, mfr);
+	mfsdr (SDR0_MFR, mfr);
 	mfr |= SDR0_MFR_ETH_CLK_SEL_V(devnum);
-	mtsdr (sdr_mfr, mfr);
+	mtsdr (SDR0_MFR, mfr);
 	sync ();
 #endif
 	/* reset emac */
@@ -150,13 +150,13 @@ static void ether_post_init (int devnum, int hw_addr)
 #if defined(CONFIG_440GX) || \
     defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
     defined(CONFIG_440SP) || defined(CONFIG_440SPE)
-	mtdcr (malmcr, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA |
+	mtdcr (MAL0_CFG, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA |
 	       MAL_CR_PLBLT_DEFAULT | 0x00330000);
 #else
-	mtdcr (malmcr, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA | MAL_CR_PLBLT_DEFAULT);
+	mtdcr (MAL0_CFG, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA | MAL_CR_PLBLT_DEFAULT);
 	/* Errata 1.12: MAL_1 -- Disable MAL bursting */
 	if (get_pvr() == PVR_440GP_RB) {
-		mtdcr (malmcr, mfdcr(malmcr) & ~MAL_CR_PLBB);
+		mtdcr (MAL0_CFG, mfdcr(MAL0_CFG) & ~MAL_CR_PLBB);
 	}
 #endif
 	/* setup buffer descriptors */
@@ -174,39 +174,39 @@ static void ether_post_init (int devnum, int hw_addr)
 	case 1:
 		/* setup MAL tx & rx channel pointers */
 #if defined (CONFIG_405EP) || defined (CONFIG_440EP) || defined (CONFIG_440GR)
-		mtdcr (maltxctp2r, &tx);
+		mtdcr (MAL0_TXCTP2R, &tx);
 #else
-		mtdcr (maltxctp1r, &tx);
+		mtdcr (MAL0_TXCTP1R, &tx);
 #endif
 #if defined(CONFIG_440)
-		mtdcr (maltxbattr, 0x0);
-		mtdcr (malrxbattr, 0x0);
+		mtdcr (MAL0_TXBADDR, 0x0);
+		mtdcr (MAL0_RXBADDR, 0x0);
 #endif
-		mtdcr (malrxctp1r, &rx);
+		mtdcr (MAL0_RXCTP1R, &rx);
 		/* set RX buffer size */
-		mtdcr (malrcbs1, PKTSIZE_ALIGN / 16);
+		mtdcr (MAL0_RCBS1, PKTSIZE_ALIGN / 16);
 		break;
 	case 0:
 	default:
 		/* setup MAL tx & rx channel pointers */
 #if defined(CONFIG_440)
-		mtdcr (maltxbattr, 0x0);
-		mtdcr (malrxbattr, 0x0);
+		mtdcr (MAL0_TXBADDR, 0x0);
+		mtdcr (MAL0_RXBADDR, 0x0);
 #endif
-		mtdcr (maltxctp0r, &tx);
-		mtdcr (malrxctp0r, &rx);
+		mtdcr (MAL0_TXCTP0R, &tx);
+		mtdcr (MAL0_RXCTP0R, &rx);
 		/* set RX buffer size */
-		mtdcr (malrcbs0, PKTSIZE_ALIGN / 16);
+		mtdcr (MAL0_RCBS0, PKTSIZE_ALIGN / 16);
 		break;
 	}
 
 	/* Enable MAL transmit and receive channels */
 #if defined(CONFIG_405EP) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
-	mtdcr (maltxcasr, (MAL_TXRX_CASR >> (devnum*2)));
+	mtdcr (MAL0_TXCASR, (MAL_TXRX_CASR >> (devnum*2)));
 #else
-	mtdcr (maltxcasr, (MAL_TXRX_CASR >> devnum));
+	mtdcr (MAL0_TXCASR, (MAL_TXRX_CASR >> devnum));
 #endif
-	mtdcr (malrxcasr, (MAL_TXRX_CASR >> devnum));
+	mtdcr (MAL0_RXCASR, (MAL_TXRX_CASR >> devnum));
 
 	/* set internal loopback mode */
 #ifdef CONFIG_SYS_POST_ETHER_EXT_LOOPBACK
@@ -257,14 +257,14 @@ static void ether_post_halt (int devnum, int hw_addr)
 	/* 1st reset MAL channel */
 	/* Note: writing a 0 to a channel has no effect */
 #if defined(CONFIG_405EP) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
-	mtdcr (maltxcarr, MAL_TXRX_CASR >> (devnum * 2));
+	mtdcr (MAL0_TXCARR, MAL_TXRX_CASR >> (devnum * 2));
 #else
-	mtdcr (maltxcarr, MAL_TXRX_CASR >> devnum);
+	mtdcr (MAL0_TXCARR, MAL_TXRX_CASR >> devnum);
 #endif
-	mtdcr (malrxcarr, MAL_TXRX_CASR >> devnum);
+	mtdcr (MAL0_RXCARR, MAL_TXRX_CASR >> devnum);
 
 	/* wait for reset */
-	while (mfdcr (malrxcasr) & (MAL_TXRX_CASR >> devnum)) {
+	while (mfdcr (MAL0_RXCASR) & (MAL_TXRX_CASR >> devnum)) {
 		if (i++ >= 1000)
 			break;
 		udelay (1000);
@@ -274,9 +274,9 @@ static void ether_post_halt (int devnum, int hw_addr)
 
 #if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
 	/* remove clocks for EMAC internal loopback  */
-	mfsdr (sdr_mfr, mfr);
+	mfsdr (SDR0_MFR, mfr);
 	mfr &= ~SDR0_MFR_ETH_CLK_SEL_V(devnum);
-	mtsdr (sdr_mfr, mfr);
+	mtsdr (SDR0_MFR, mfr);
 #endif
 }
 
diff --git a/post/cpu/ppc4xx/uart.c b/post/cpu/ppc4xx/uart.c
index 84a4d0a0d6..be217fcf8d 100644
--- a/post/cpu/ppc4xx/uart.c
+++ b/post/cpu/ppc4xx/uart.c
@@ -68,7 +68,7 @@
 #define CR0_EXTCLK_ENA  0x00600000
 #define CR0_UDIV_POS    16
 #define UDIV_SUBTRACT	1
-#define UART0_SDR	cntrl0
+#define UART0_SDR	CPC0_CR0
 #define MFREG(a, d)	d = mfdcr(a)
 #define MTREG(a, d)	mtdcr(a, d)
 #else /* #if defined(CONFIG_440GP) */
@@ -77,16 +77,16 @@
 #define CR0_EXTCLK_ENA  0x00800000
 #define CR0_UDIV_POS    0
 #define UDIV_SUBTRACT	0
-#define UART0_SDR	sdr_uart0
-#define UART1_SDR	sdr_uart1
+#define UART0_SDR	SDR0_UART0
+#define UART1_SDR	SDR0_UART1
 #if defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \
     defined(CONFIG_440GR) || defined(CONFIG_440GRX) || \
     defined(CONFIG_440SP) || defined(CONFIG_440SPE)
-#define UART2_SDR	sdr_uart2
+#define UART2_SDR	SDR0_UART2
 #endif
 #if defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \
     defined(CONFIG_440GR) || defined(CONFIG_440GRX)
-#define UART3_SDR	sdr_uart3
+#define UART3_SDR	SDR0_UART3
 #endif
 #define MFREG(a, d)	mfsdr(a, d)
 #define MTREG(a, d)	mtsdr(a, d)
@@ -106,8 +106,8 @@
 #define CR0_EXTCLK_ENA	0x00800000
 #define CR0_UDIV_POS	0
 #define UDIV_SUBTRACT	0
-#define UART0_SDR	sdr_uart0
-#define UART1_SDR	sdr_uart1
+#define UART0_SDR	SDR0_UART0
+#define UART1_SDR	SDR0_UART1
 #define MFREG(a, d)	mfsdr(a, d)
 #define MTREG(a, d)	mtsdr(a, d)
 #else /* CONFIG_405GP || CONFIG_405CR */
@@ -276,7 +276,7 @@ static int uart_post_init (unsigned long dev_base)
 	clk = tmp = reg = 0;
 #else
 #ifdef CONFIG_405EP
-	reg = mfdcr(cpc0_ucr) & ~(UCR0_MASK | UCR1_MASK);
+	reg = mfdcr(CPC0_UCR) & ~(UCR0_MASK | UCR1_MASK);
 	clk = gd->cpu_clk;
 	tmp = CONFIG_SYS_BASE_BAUD * 16;
 	udiv = (clk + tmp / 2) / tmp;
@@ -284,9 +284,9 @@ static int uart_post_init (unsigned long dev_base)
 		udiv = UDIV_MAX;
 	reg |= (udiv) << UCR0_UDIV_POS;	        /* set the UART divisor */
 	reg |= (udiv) << UCR1_UDIV_POS;	        /* set the UART divisor */
-	mtdcr (cpc0_ucr, reg);
+	mtdcr (CPC0_UCR, reg);
 #else /* CONFIG_405EP */
-	reg = mfdcr(cntrl0) & ~CR0_MASK;
+	reg = mfdcr(CPC0_CR0) & ~CR0_MASK;
 #ifdef CONFIG_SYS_EXT_SERIAL_CLOCK
 	clk = CONFIG_SYS_EXT_SERIAL_CLOCK;
 	udiv = 1;
@@ -303,7 +303,7 @@ static int uart_post_init (unsigned long dev_base)
 #endif
 #endif
 	reg |= (udiv - 1) << CR0_UDIV_POS;	/* set the UART divisor */
-	mtdcr (cntrl0, reg);
+	mtdcr (CPC0_CR0, reg);
 #endif /* CONFIG_405EP */
 	tmp = gd->baudrate * udiv * 16;
 	bdiv = (clk + tmp / 2) / tmp;