Merge tag 'v2021.04-rc4' into next

Prepare v2021.04-rc4

27 files changed, 205 insertions, 103 deletions

diff --git a/include/addr_map.h b/include/addr_map.h
index d322dd222a..55d3a6a165 100644
--- a/include/addr_map.h
+++ b/include/addr_map.h
@@ -8,9 +8,17 @@
 
 #include <asm/types.h>
 
-extern phys_addr_t addrmap_virt_to_phys(void *vaddr);
-extern void *addrmap_phys_to_virt(phys_addr_t paddr);
-extern void addrmap_set_entry(unsigned long vaddr, phys_addr_t paddr,
-				phys_size_t size, int idx);
+struct addrmap {
+	phys_addr_t paddr;
+	phys_size_t size;
+	unsigned long vaddr;
+};
+
+extern struct addrmap address_map[CONFIG_SYS_NUM_ADDR_MAP];
+
+phys_addr_t addrmap_virt_to_phys(void *vaddr);
+void *addrmap_phys_to_virt(phys_addr_t paddr);
+void addrmap_set_entry(unsigned long vaddr, phys_addr_t paddr,
+		       phys_size_t size, int idx);
 
 #endif
diff --git a/include/charset.h b/include/charset.h
index cc650a2ce7..a911160f19 100644
--- a/include/charset.h
+++ b/include/charset.h
@@ -14,6 +14,11 @@
 #define MAX_UTF8_PER_UTF16 3
 
 /**
+ * codepage_437 - Unicode to codepage 437 translation table
+ */
+extern const u16 codepage_437[128];
+
+/**
  * console_read_unicode() - read Unicode code point from console
  *
  * @code:	pointer to store Unicode code point
@@ -270,4 +275,33 @@ u16 *u16_strdup(const void *src);
  */
 uint8_t *utf16_to_utf8(uint8_t *dest, const uint16_t *src, size_t size);
 
+/**
+ * utf_to_cp() - translate Unicode code point to 8bit codepage
+ *
+ * Codepoints that do not exist in the codepage are rendered as question mark.
+ *
+ * @c:		pointer to Unicode code point to be translated
+ * @codepage:	Unicode to codepage translation table
+ * Return:	0 on success, -ENOENT if codepoint cannot be translated
+ */
+int utf_to_cp(s32 *c, const u16 *codepage);
+
+/**
+ * utf8_to_cp437_stream() - convert UTF-8 stream to codepage 437
+ *
+ * @c:		next UTF-8 character to convert
+ * @buffer:	buffer, at least 5 characters
+ * Return:	next codepage 437 character or 0
+ */
+int utf8_to_cp437_stream(u8 c, char *buffer);
+
+/**
+ * utf8_to_utf32_stream() - convert UTF-8 stream to UTF-32
+ *
+ * @c:		next UTF-8 character to convert
+ * @buffer:	buffer, at least 5 characters
+ * Return:	next codepage 437 character or 0
+ */
+int utf8_to_utf32_stream(u8 c, char *buffer);
+
 #endif /* __CHARSET_H_ */
diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h
index b1c8917f21..ea4da6a5fe 100644
--- a/include/configs/MPC8541CDS.h
+++ b/include/configs/MPC8541CDS.h
@@ -18,8 +18,6 @@
 #define CONFIG_PCI_INDIRECT_BRIDGE
 #define CONFIG_SYS_PCI_64BIT	1	/* enable 64-bit PCI resources */
 
-#define CONFIG_FSL_VIA
-
 #ifndef __ASSEMBLY__
 extern unsigned long get_clock_freq(void);
 #endif
diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h
index 0605f70ffc..9f83931bed 100644
--- a/include/configs/MPC8548CDS.h
+++ b/include/configs/MPC8548CDS.h
@@ -23,8 +23,6 @@
 
 #define CONFIG_INTERRUPTS		/* enable pci, srio, ddr interrupts */
 
-#define CONFIG_FSL_VIA
-
 #ifndef __ASSEMBLY__
 #include <linux/stringify.h>
 extern unsigned long get_clock_freq(void);
diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h
index 88999ef2b8..79e309c95c 100644
--- a/include/configs/MPC8555CDS.h
+++ b/include/configs/MPC8555CDS.h
@@ -18,8 +18,6 @@
 #define CONFIG_PCI_INDIRECT_BRIDGE
 #define CONFIG_SYS_PCI_64BIT	1	/* enable 64-bit PCI resources */
 
-#define CONFIG_FSL_VIA
-
 #ifndef __ASSEMBLY__
 extern unsigned long get_clock_freq(void);
 #endif
diff --git a/include/configs/am65x_evm.h b/include/configs/am65x_evm.h
index b39a5b4ca4..76d73086fb 100644
--- a/include/configs/am65x_evm.h
+++ b/include/configs/am65x_evm.h
@@ -30,7 +30,7 @@
  * our memory footprint. The less we use for BSS the more we have available
  * for everything else.
  */
-#define CONFIG_SPL_BSS_MAX_SIZE		0x5000
+#define CONFIG_SPL_BSS_MAX_SIZE		0xc00
 /*
  * Link BSS to be within SPL in a dedicated region located near the top of
  * the MCU SRAM, this way making it available also before relocation. Note
diff --git a/include/configs/apalis-imx8.h b/include/configs/apalis-imx8.h
index b474b2f522..8fe3226cf9 100644
--- a/include/configs/apalis-imx8.h
+++ b/include/configs/apalis-imx8.h
@@ -21,9 +21,6 @@
 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
 
 /* Networking */
-#define FEC_QUIRK_ENET_MAC
-#define FEC_ENET_ENABLE_TXC_DELAY
-
 #define CONFIG_TFTP_TSIZE
 
 #define CONFIG_IPADDR			192.168.10.2
diff --git a/include/configs/apalis-imx8x.h b/include/configs/apalis-imx8x.h
index db31c210f5..fdb0da34ec 100644
--- a/include/configs/apalis-imx8x.h
+++ b/include/configs/apalis-imx8x.h
@@ -25,9 +25,6 @@
 #define CONFIG_NETMASK			255.255.255.0
 #define CONFIG_SERVERIP			192.168.10.1
 
-#define FEC_ENET_ENABLE_TXC_DELAY
-#define FEC_ENET_ENABLE_RXC_DELAY
-
 #define MEM_LAYOUT_ENV_SETTINGS \
 	"kernel_addr_r=0x80280000\0" \
 	"fdt_addr_r=0x83100000\0" \
@@ -143,7 +140,6 @@
 #define CONFIG_FEC_MXC_PHYADDR          0x4
 #define CONFIG_ETHPRIME                 "eth0"
 #define CONFIG_FEC_XCV_TYPE		RGMII
-#define FEC_QUIRK_ENET_MAC
 #define PHY_ANEG_TIMEOUT 20000
 
 #endif /* __APALIS_IMX8X_H */
diff --git a/include/configs/capricorn-common.h b/include/configs/capricorn-common.h
index 7c168f17d5..b310e6c9e5 100644
--- a/include/configs/capricorn-common.h
+++ b/include/configs/capricorn-common.h
@@ -43,7 +43,6 @@
 
 /* ENET Config */
 #define CONFIG_FEC_XCV_TYPE		RMII
-#define FEC_QUIRK_ENET_MAC
 
 /* ENET1 connects to base board and MUX with ESAI */
 #define CONFIG_FEC_ENET_DEV		1
diff --git a/include/configs/colibri-imx8x.h b/include/configs/colibri-imx8x.h
index fc2c191594..59593f6c00 100644
--- a/include/configs/colibri-imx8x.h
+++ b/include/configs/colibri-imx8x.h
@@ -22,8 +22,6 @@
 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
 
 /* Networking */
-#define FEC_QUIRK_ENET_MAC
-
 #define CONFIG_TFTP_TSIZE
 
 #define CONFIG_IPADDR			192.168.10.2
diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h
index 0f41748093..883cbc95d2 100644
--- a/include/configs/da850evm.h
+++ b/include/configs/da850evm.h
@@ -215,6 +215,10 @@
 #define CONFIG_USB_OHCI_NEW
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	15
 
+#ifndef CONFIG_MTD_NOR_FLASH
+#define CONFIG_SPL_PAD_TO	32768
+#endif
+
 #ifdef CONFIG_SPL_BUILD
 /* defines for SPL */
 #define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SYS_TEXT_BASE - \
@@ -222,7 +226,7 @@
 #define CONFIG_SYS_SPL_MALLOC_SIZE	CONFIG_SYS_MALLOC_LEN
 #define CONFIG_SPL_STACK	0x8001ff00
 #define CONFIG_SPL_MAX_FOOTPRINT	32768
-#define CONFIG_SPL_PAD_TO	32768
+
 #endif
 
 /* Load U-Boot Image From MMC */
diff --git a/include/configs/imx8mm_venice.h b/include/configs/imx8mm_venice.h
new file mode 100644
index 0000000000..a406e91c84
--- /dev/null
+++ b/include/configs/imx8mm_venice.h
@@ -0,0 +1,125 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2021 Gateworks Corporation
+ */
+
+#ifndef __IMX8MM_VENICE_H
+#define __IMX8MM_VENICE_H
+
+#include <asm/arch/imx-regs.h>
+#include <linux/sizes.h>
+
+#define CONFIG_SPL_MAX_SIZE		(148 * 1024)
+#define CONFIG_SYS_MONITOR_LEN		SZ_512K
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300
+#define CONFIG_SYS_UBOOT_BASE	\
+	(QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
+
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SPL_STACK		0x920000
+#define CONFIG_SPL_BSS_START_ADDR	0x910000
+#define CONFIG_SPL_BSS_MAX_SIZE		SZ_8K	/* 8 KB */
+#define CONFIG_SYS_SPL_MALLOC_START	0x42200000
+#define CONFIG_SYS_SPL_MALLOC_SIZE	SZ_512K	/* 512 KB */
+
+/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
+#define CONFIG_MALLOC_F_ADDR		0x930000
+/* For RAW image gives a error info not panic */
+#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
+
+#endif
+
+#define MEM_LAYOUT_ENV_SETTINGS \
+	"fdt_addr_r=0x44000000\0" \
+	"kernel_addr_r=0x42000000\0" \
+	"ramdisk_addr_r=0x46400000\0" \
+	"scriptaddr=0x46000000\0"
+
+/* Link Definitions */
+#define CONFIG_LOADADDR			0x40480000
+#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
+
+/* Enable Distro Boot */
+#ifndef CONFIG_SPL_BUILD
+#define BOOT_TARGET_DEVICES(func) \
+	func(MMC, mmc, 1) \
+	func(MMC, mmc, 2) \
+	func(DHCP, dhcp, na)
+#include <config_distro_bootcmd.h>
+#undef CONFIG_ISO_PARTITION
+#else
+#define BOOTENV
+#endif
+
+/* Initial environment variables */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	BOOTENV \
+	MEM_LAYOUT_ENV_SETTINGS \
+	"script=boot.scr\0" \
+	"bootm_size=0x10000000\0" \
+	"ipaddr=192.168.1.22\0" \
+	"serverip=192.168.1.146\0" \
+	"dev=2\0" \
+	"preboot=gsc wd-disable\0" \
+	"console=ttymxc1,115200\0" \
+	"update_firmware=" \
+		"tftpboot $loadaddr $image && " \
+		"setexpr blkcnt $filesize + 0x1ff && " \
+		"setexpr blkcnt $blkcnt / 0x200 && " \
+		"mmc dev $dev && " \
+		"mmc write $loadaddr 0x42 $blkcnt\0" \
+	"boot_net=" \
+		"tftpboot $kernel_addr_r $image && " \
+		"booti $kernel_addr_r - $fdtcontroladdr\0" \
+	"update_rootfs=" \
+		"tftpboot $loadaddr $image && " \
+		"gzwrite mmc $dev $loadaddr $filesize 100000 1000000\0" \
+	"update_all=" \
+		"tftpboot $loadaddr $image && " \
+		"gzwrite mmc $dev $loadaddr $filesize\0" \
+	"erase_env=mmc dev $dev; mmc erase 0x7f08 0x40\0"
+
+#define CONFIG_SYS_INIT_RAM_ADDR        0x40000000
+#define CONFIG_SYS_INIT_RAM_SIZE        SZ_2M
+#define CONFIG_SYS_INIT_SP_OFFSET \
+	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN		SZ_32M
+#define CONFIG_SYS_SDRAM_BASE           0x40000000
+
+/* SDRAM configuration */
+#define PHYS_SDRAM                      0x40000000
+#define PHYS_SDRAM_SIZE			SZ_1G /* 1GB DDR */
+#define CONFIG_SYS_BOOTM_LEN		SZ_256M
+
+/* UART */
+#define CONFIG_MXC_UART_BASE		UART2_BASE_ADDR
+
+/* Monitor Command Prompt */
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_CBSIZE		SZ_2K
+#define CONFIG_SYS_MAXARGS		64
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
+					sizeof(CONFIG_SYS_PROMPT) + 16)
+
+/* USDHC */
+#define CONFIG_SYS_FSL_USDHC_NUM	2
+#define CONFIG_SYS_FSL_ESDHC_ADDR	0
+#define CONFIG_SYS_MMC_IMG_LOAD_PART	1
+
+/* I2C */
+#define CONFIG_SYS_I2C_SPEED		100000
+
+/* FEC */
+#define CONFIG_ETHPRIME                 "eth0"
+#define CONFIG_FEC_XCV_TYPE             RGMII
+#define CONFIG_FEC_MXC_PHYADDR          0
+#define FEC_QUIRK_ENET_MAC
+#define IMX_FEC_BASE			0x30BE0000
+
+#endif
diff --git a/include/configs/imx8mn_beacon.h b/include/configs/imx8mn_beacon.h
index 7a247cc560..9ce60fd51b 100644
--- a/include/configs/imx8mn_beacon.h
+++ b/include/configs/imx8mn_beacon.h
@@ -126,7 +126,11 @@
 
 #define CONFIG_SYS_SDRAM_BASE		0x40000000
 #define PHYS_SDRAM			0x40000000
+#if CONFIG_IS_ENABLED(IMX8MN_BEACON_2GB_LPDDR)
+#define PHYS_SDRAM_SIZE		0x80000000 /* 2GB DDR */
+#else
 #define PHYS_SDRAM_SIZE		0x40000000 /* 1GB DDR */
+#endif
 
 #define CONFIG_MXC_UART_BASE		UART2_BASE_ADDR
 
diff --git a/include/configs/imx8qm_mek.h b/include/configs/imx8qm_mek.h
index ff281d3800..99e73a9446 100644
--- a/include/configs/imx8qm_mek.h
+++ b/include/configs/imx8qm_mek.h
@@ -173,6 +173,5 @@
 
 /* Networking */
 #define CONFIG_FEC_XCV_TYPE		RGMII
-#define FEC_QUIRK_ENET_MAC
 
 #endif /* __IMX8QM_MEK_H */
diff --git a/include/configs/imx8qm_rom7720.h b/include/configs/imx8qm_rom7720.h
index e5989ebafb..fcbf8eeb34 100644
--- a/include/configs/imx8qm_rom7720.h
+++ b/include/configs/imx8qm_rom7720.h
@@ -161,7 +161,6 @@
 
 /* Networking */
 #define CONFIG_FEC_XCV_TYPE		RGMII
-#define FEC_QUIRK_ENET_MAC
 
 #include <linux/stringify.h>
 #endif /* __IMX8QM_ROM7720_H */
diff --git a/include/configs/imx8qxp_mek.h b/include/configs/imx8qxp_mek.h
index 51a8eb6760..a7d623a9b9 100644
--- a/include/configs/imx8qxp_mek.h
+++ b/include/configs/imx8qxp_mek.h
@@ -177,7 +177,6 @@
 
 /* Networking */
 #define CONFIG_FEC_XCV_TYPE		RGMII
-#define FEC_QUIRK_ENET_MAC
 
 /* Misc configuration */
 #define CONFIG_SYS_CBSIZE	2048
diff --git a/include/configs/ls1088aqds.h b/include/configs/ls1088aqds.h
index 0dcf844303..4d04833c50 100644
--- a/include/configs/ls1088aqds.h
+++ b/include/configs/ls1088aqds.h
@@ -326,12 +326,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_VOL_MONITOR_LTC3882_SET
 #define CONFIG_VOL_MONITOR_LTC3882_READ
 
-/* PM Bus commands code for LTC3882*/
-#define PMBUS_CMD_PAGE                  0x0
-#define PMBUS_CMD_READ_VOUT             0x8B
-#define PMBUS_CMD_PAGE_PLUS_WRITE       0x05
-#define PMBUS_CMD_VOUT_COMMAND          0x21
-
 #define PWM_CHANNEL0                    0x0
 
 /*
diff --git a/include/configs/ls1088ardb.h b/include/configs/ls1088ardb.h
index f59a9f5574..6f36dd417a 100644
--- a/include/configs/ls1088ardb.h
+++ b/include/configs/ls1088ardb.h
@@ -203,7 +203,7 @@
 
 #define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000
 
-#define I2C_MUX_CH_VOL_MONITOR          0xA
+#define I2C_MUX_CH_VOL_MONITOR         0xA
 /* Voltage monitor on channel 2*/
 #define I2C_VOL_MONITOR_ADDR           0x63
 #define I2C_VOL_MONITOR_BUS_V_OFFSET   0x2
@@ -221,12 +221,6 @@
 #define CONFIG_VOL_MONITOR_LTC3882_SET
 #define CONFIG_VOL_MONITOR_LTC3882_READ
 
-/* PM Bus commands code for LTC3882*/
-#define PMBUS_CMD_PAGE                  0x0
-#define PMBUS_CMD_READ_VOUT             0x8B
-#define PMBUS_CMD_PAGE_PLUS_WRITE       0x05
-#define PMBUS_CMD_VOUT_COMMAND          0x21
-
 #define PWM_CHANNEL0                    0x0
 
 /*
diff --git a/include/configs/meson64.h b/include/configs/meson64.h
index 52cc01f73d..7e97f89052 100644
--- a/include/configs/meson64.h
+++ b/include/configs/meson64.h
@@ -80,6 +80,7 @@
 	"scriptaddr=0x08000000\0" \
 	"kernel_addr_r=0x08080000\0" \
 	"pxefile_addr_r=0x01080000\0" \
+	"fdtoverlay_addr_r=0x01000000\0" \
 	"ramdisk_addr_r=0x13000000\0" \
 	"fdtfile=amlogic/" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
 	BOOTENV
diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h
index 49f88c27dc..3574d65451 100644
--- a/include/configs/mx51evk.h
+++ b/include/configs/mx51evk.h
@@ -51,14 +51,6 @@
 #define CONFIG_SYS_FSL_ESDHC_ADDR	MMC_SDHC1_BASE_ADDR
 #define CONFIG_SYS_FSL_ESDHC_NUM	2
 
-/*
- * Eth Configs
- */
-
-#define CONFIG_FEC_MXC
-#define IMX_FEC_BASE	FEC_BASE_ADDR
-#define CONFIG_FEC_MXC_PHYADDR	0x1F
-
 /* USB Configs */
 #define CONFIG_MXC_USB_PORT	1
 #define CONFIG_MXC_USB_PORTSC	PORT_PTS_ULPI
diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h
index a0dd33aecd..e5dc9ac1d9 100644
--- a/include/configs/mx53loco.h
+++ b/include/configs/mx53loco.h
@@ -30,12 +30,6 @@
 #define CONFIG_SYS_FSL_ESDHC_ADDR	0
 #define CONFIG_SYS_FSL_ESDHC_NUM	2
 
-/* Eth Configs */
-
-#define CONFIG_FEC_MXC
-#define IMX_FEC_BASE	FEC_BASE_ADDR
-#define CONFIG_FEC_MXC_PHYADDR	0x1F
-
 /* USB Configs */
 #define CONFIG_MXC_USB_PORT	1
 #define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h
index 93d00a4dc3..ac579f3338 100644
--- a/include/configs/mx6sabre_common.h
+++ b/include/configs/mx6sabre_common.h
@@ -73,11 +73,14 @@
 	"mmcargs=setenv bootargs console=${console},${baudrate} " \
 		"root=PARTUUID=${uuid} rootwait rw\0" \
 	"loadbootscript=" \
-		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
+		"load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script} || " \
+		"load mmc ${mmcdev}:${mmcpart} ${loadaddr} boot/${script};\0" \
 	"bootscript=echo Running bootscript from mmc ...; " \
 		"source\0" \
-	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
-	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdtfile}\0" \
+	"loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image} || " \
+		"load mmc ${mmcdev}:${mmcpart} ${loadaddr} boot/${image}\0" \
+	"loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdtfile} || " \
+		"load mmc ${mmcdev}:${mmcpart} ${fdt_addr} boot/${fdtfile}\0" \
 	"mmcboot=echo Booting from mmc ...; " \
 		"run finduuid; " \
 		"run mmcargs; " \
diff --git a/include/configs/nokia_rx51.h b/include/configs/nokia_rx51.h
index 3f2700d8e2..23368de624 100644
--- a/include/configs/nokia_rx51.h
+++ b/include/configs/nokia_rx51.h
@@ -70,10 +70,12 @@
 
 /* USB device configuration */
 #define CONFIG_USB_DEVICE
+#define CONFIG_USB_TTY
 #define CONFIG_USBD_VENDORID		0x0421
-#define CONFIG_USBD_PRODUCTID		0x01c8
+#define CONFIG_USBD_PRODUCTID_CDCACM	0x01c8
+#define CONFIG_USBD_PRODUCTID_GSERIAL	0x01c8
 #define CONFIG_USBD_MANUFACTURER	"Nokia"
-#define CONFIG_USBD_PRODUCT_NAME	"N900"
+#define CONFIG_USBD_PRODUCT_NAME	"N900 (U-Boot)"
 
 #define GPIO_SLIDE			71
 
@@ -108,15 +110,9 @@ int rx51_kp_getc(struct stdio_dev *sdev);
 /* Environment information */
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"usbtty=cdc_acm\0" \
-	"stdin=serial,vga\0" \
-	"stdout=serial,vga\0" \
-	"stderr=serial,vga\0" \
-	"setcon=setenv stdin ${con};" \
-		"setenv stdout ${con};" \
-		"setenv stderr ${con}\0" \
-	"sercon=setenv con serial; run setcon\0" \
-	"usbcon=setenv con usbtty; run setcon\0" \
-	"vgacon=setenv con vga; run setcon\0" \
+	"stdin=usbtty,serial,vga\0" \
+	"stdout=usbtty,serial,vga\0" \
+	"stderr=usbtty,serial,vga\0" \
 	"slide=gpio input " __stringify(GPIO_SLIDE) "\0" \
 	"switchmmc=mmc dev ${mmcnum}\0" \
 	"kernaddr=0x82008000\0" \
@@ -198,9 +194,6 @@ int rx51_kp_getc(struct stdio_dev *sdev);
 #define CONFIG_POSTBOOTMENU \
 	"echo;" \
 	"echo Extra commands:;" \
-	"echo run sercon - Use serial port for control.;" \
-	"echo run usbcon - Use usbtty for control.;" \
-	"echo run vgacon - Use framebuffer/keyboard.;" \
 	"echo run sdboot - Boot from SD card slot.;" \
 	"echo run emmcboot - Boot internal eMMC memory.;" \
 	"echo run attachboot - Boot attached kernel image.;" \
diff --git a/include/configs/qemu-ppce500.h b/include/configs/qemu-ppce500.h
index ee6ef18224..b2e1204e0f 100644
--- a/include/configs/qemu-ppce500.h
+++ b/include/configs/qemu-ppce500.h
@@ -13,8 +13,6 @@
 
 #define CONFIG_SYS_RAMBOOT
 
-#define CONFIG_PCI1		1	/* PCI controller 1 */
-#define CONFIG_FSL_PCI_INIT		/* Use common FSL init code */
 #define CONFIG_SYS_PCI_64BIT		/* enable 64-bit PCI resources */
 
 #define CONFIG_ENABLE_36BIT_PHYS
@@ -35,7 +33,7 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void);
 
 /* Virtual address range for PCI region maps */
 #define CONFIG_SYS_PCI_MAP_START	0x80000000
-#define CONFIG_SYS_PCI_MAP_END		0xe8000000
+#define CONFIG_SYS_PCI_MAP_END		0xe0000000
 
 /* Virtual address to a temporary map if we need it (max 128MB) */
 #define CONFIG_SYS_TMPVIRT		0xe8000000
@@ -73,29 +71,11 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void);
 #define CONFIG_SYS_MONITOR_LEN		(512 * 1024)
 #define CONFIG_SYS_MALLOC_LEN		(4 * 1024 * 1024)
 
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	1
-#define CONFIG_SYS_NS16550_CLK		(get_bus_freq(0))
-
-#define CONFIG_SYS_BAUDRATE_TABLE	\
-	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
-
-#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CCSRBAR+0x4500)
-#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_CCSRBAR+0x4600)
-
-/*
- * General PCI
- * Memory space is mapped 1-1, but I/O space must start from 0.
- */
-
-#ifdef CONFIG_PCI
-#define CONFIG_PCI_INDIRECT_BRIDGE
-
-#define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
-#endif	/* CONFIG_PCI */
-
 #define CONFIG_LBA48
 
+/* RTC */
+#define CONFIG_RTC_PT7C4338
+
 /*
  * Environment
  */
@@ -126,6 +106,6 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void);
 #define CONFIG_LOADADDR		1000000
 
 #define CONFIG_BOOTCOMMAND		\
-	"test -n \"$qemu_kernel_addr\" && bootm $qemu_kernel_addr - $fdt_addr_r\0"
+	"test -n \"$qemu_kernel_addr\" && bootm $qemu_kernel_addr - $fdtcontroladdr\0"
 
 #endif	/* __QEMU_PPCE500_H */
diff --git a/include/configs/socfpga_soc64_common.h b/include/configs/socfpga_soc64_common.h
index fdcd7d3e9a..1cfa190047 100644
--- a/include/configs/socfpga_soc64_common.h
+++ b/include/configs/socfpga_soc64_common.h
@@ -79,19 +79,13 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
 #endif /* CONFIG_CADENCE_QSPI */
 
 /*
- * Boot arguments passed to the boot command. The value of
- * CONFIG_BOOTARGS goes into the environment value "bootargs".
- * Do note the value will override also the chosen node in FDT blob.
+ * Environment variable
  */
 
 #ifdef CONFIG_FIT
 #define CONFIG_BOOTFILE "kernel.itb"
-#define CONFIG_BOOTCOMMAND "run fatscript; run mmcfitload;run linux_qspi_enable;" \
-			   "run mmcfitboot"
 #else
 #define CONFIG_BOOTFILE "Image"
-#define CONFIG_BOOTCOMMAND "run fatscript; run mmcload;run linux_qspi_enable;" \
-			   "run mmcboot"
 #endif
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
@@ -200,7 +194,7 @@ unsigned int cm_get_l4_sys_free_clk_hz(void);
  * 0x8000_0000 ...... End of SDRAM_1 (assume 2GB)
  *
  */
-#define CONFIG_SPL_TARGET		"spl/u-boot-spl.hex"
+#define CONFIG_SPL_TARGET		"spl/u-boot-spl-dtb.hex"
 #define CONFIG_SPL_MAX_SIZE		CONFIG_SYS_INIT_RAM_SIZE
 #define CONFIG_SPL_STACK		CONFIG_SYS_INIT_SP_ADDR
 #define CONFIG_SPL_BSS_MAX_SIZE		0x100000	/* 1 MB */
diff --git a/include/configs/stm32mp1.h b/include/configs/stm32mp1.h
index 36e400453e..db2117a3d7 100644
--- a/include/configs/stm32mp1.h
+++ b/include/configs/stm32mp1.h
@@ -160,7 +160,6 @@
  * and the ramdisk at the end.
  */
 #define CONFIG_EXTRA_ENV_SETTINGS \
-	"bootdelay=1\0" \
 	"kernel_addr_r=0xc2000000\0" \
 	"fdt_addr_r=0xc4000000\0" \
 	"scriptaddr=0xc4100000\0" \
diff --git a/include/test/suites.h b/include/test/suites.h
index 52e8fc8155..f5d8e139ce 100644
--- a/include/test/suites.h
+++ b/include/test/suites.h
@@ -26,6 +26,8 @@ int cmd_ut_category(const char *name, const char *prefix,
 		    struct unit_test *tests, int n_ents,
 		    int argc, char *const argv[]);
 
+int do_ut_addrmap(struct cmd_tbl *cmdtp, int flag, int argc,
+		  char *const argv[]);
 int do_ut_bootm(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]);
 int do_ut_bloblist(struct cmd_tbl *cmdtp, int flag, int argc,
 		   char *const argv[]);