diff options
| author | Simon Glass <sjg@chromium.org> | 2019-12-19 17:58:18 -0700 |
|---|---|---|
| committer | Bin Meng <bmeng.cn@gmail.com> | 2020-02-04 01:19:13 +0800 |
| commit | 62cbde4c4e462e5147d07cf1424492bb39e7bf94 (patch) | |
| tree | 2faa4e220f1f8102f815c99eb573073484cc68d0 /include/ns16550.h | |
| parent | 31a790bee939e227dfc7e6a6a323b2b13180707f (diff) | |
| download | u-boot-62cbde4c4e462e5147d07cf1424492bb39e7bf94.tar.gz u-boot-62cbde4c4e462e5147d07cf1424492bb39e7bf94.tar.bz2 u-boot-62cbde4c4e462e5147d07cf1424492bb39e7bf94.zip | |
serial: ns16550: Support run-time configuration
At present this driver uses an assortment of CONFIG options to control
how it accesses the hardware. This is painful for platforms that are
supposed to be controlled by a device tree or a previous-stage bootloader.
Add a new CONFIG option to enable fully dynamic configuration. This
controls register spacing, size, offset and endianness.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Aiden Park <aiden.park@intel.com>
Tested-by: Aiden Park <aiden.park@intel.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
[bmeng: squashed in http://patchwork.ozlabs.org/patch/1232929/]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Diffstat (limited to 'include/ns16550.h')
| -rw-r--r-- | include/ns16550.h | 16 |
1 files changed, 15 insertions, 1 deletions
diff --git a/include/ns16550.h b/include/ns16550.h index 701efeea85..18c9077755 100644 --- a/include/ns16550.h +++ b/include/ns16550.h @@ -31,6 +31,9 @@ #define CONFIG_SYS_NS16550_REG_SIZE (-1) #endif +#ifdef CONFIG_NS16550_DYNAMIC +#define UART_REG(x) unsigned char x +#else #if !defined(CONFIG_SYS_NS16550_REG_SIZE) || (CONFIG_SYS_NS16550_REG_SIZE == 0) #error "Please define NS16550 registers size." #elif defined(CONFIG_SYS_NS16550_MEM32) && !defined(CONFIG_DM_SERIAL) @@ -44,14 +47,24 @@ unsigned char x; \ unsigned char postpad_##x[-CONFIG_SYS_NS16550_REG_SIZE - 1]; #endif +#endif /* CONFIG_NS16550_DYNAMIC */ + +enum ns16550_flags { + NS16550_FLAG_IO = 1 << 0, /* Use I/O access (else mem-mapped) */ + NS16550_FLAG_ENDIAN = 1 << 1, /* Use out_le/be_32() */ + NS16550_FLAG_BE = 1 << 2, /* Big-endian access (else little) */ +}; /** * struct ns16550_platdata - information about a NS16550 port * * @base: Base register address - * @reg_width: IO accesses size of registers (in bytes) + * @reg_width: IO accesses size of registers (in bytes, 1 or 4) * @reg_shift: Shift size of registers (0=byte, 1=16bit, 2=32bit...) + * @reg_offset: Offset to start of registers (normally 0) * @clock: UART base clock speed in Hz + * @fcr: Offset of FCR register (normally UART_FCR_DEFVAL) + * @flags: A few flags (enum ns16550_flags) * @bdf: PCI slot/function (pci_dev_t) */ struct ns16550_platdata { @@ -61,6 +74,7 @@ struct ns16550_platdata { int reg_offset; int clock; u32 fcr; + int flags; #if defined(CONFIG_PCI) && defined(CONFIG_SPL) int bdf; #endif |