arm: Remove overo board

OF_CONTROL, DM_SPI and other driver model migration deadlines
are expired for this board.

Drop it.

Cc: Ash Charles <ash@gumstix.com>
Cc: Steve Sakoman <sakoman@gmail.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>

2 files changed, 0 insertions, 220 deletions

diff --git a/include/configs/duovero.h b/include/configs/duovero.h
deleted file mode 100644
index dccb369991..0000000000
--- a/include/configs/duovero.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright: 2013
- * Gumstix, Inc - http://www.gumstix.com
- * Maintainer: Ash Charles  <ash@gumstix.com>
- *
- * Configuration settings for the Gumstix DuoVero board.
- * See omap4_common.h for OMAP4 common part
- */
-
-#ifndef __CONFIG_DUOVERO_H
-#define __CONFIG_DUOVERO_H
-
-/*
- * High Level Configuration Options
- */
-#define CONFIG_DUOVERO
-#define CONFIG_MACH_TYPE                MACH_TYPE_DUOVERO
-
-#include <configs/ti_omap4_common.h>
-
-#undef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
-#define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION
-#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
-
-/* USB UHH support options */
-#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 1
-#define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 62
-
-#define CONFIG_SYS_ENABLE_PADS_ALL
-
-/* GPIO */
-
-/* ENV related config options */
-
-#endif /* __CONFIG_DUOVERO_H */
diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
deleted file mode 100644
index 9a5b9f297c..0000000000
--- a/include/configs/omap3_overo.h
+++ /dev/null
@@ -1,184 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Configuration settings for the Gumstix Overo board.
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <configs/ti_omap3_common.h>
-/*
- * We are only ever GP parts and will utilize all of the "downloaded image"
- * area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB).
- */
-
-/* call misc_init_r */
-
-/* pass the revision tag */
-#define CONFIG_REVISION_TAG
-
-/* override size of malloc() pool */
-#undef CONFIG_SYS_MALLOC_LEN
-/* Shift 128 << 15 provides 4 MiB heap to support UBI commands.
- * Shift 128 << 10 provides 128 KiB heap for limited-memory devices. */
-#define CONFIG_SYS_MALLOC_LEN	(CONFIG_ENV_SIZE + (128 << 15))
-
-/* I2C Support */
-
-/* TWL4030 LED */
-
-/* USB EHCI */
-#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO	183
-
-/* commands to include */
-
-#ifdef CONFIG_MTD_RAW_NAND
-/* NAND block size is 128 KiB.  Synchronize these values with
- * overo_nand_partitions in mach-omap2/board-overo.c in Linux:
- *  xloader              4 * NAND_BLOCK_SIZE = 512 KiB
- *  uboot               14 * NAND_BLOCK_SIZE = 1792 KiB
- *  uboot environtment   2 * NAND_BLOCK_SIZE = 256 KiB
- *  linux               64 * NAND_BLOCK_SIZE = 8 MiB
- *  rootfs              remainder
- */
-#endif /* CONFIG_MTD_RAW_NAND */
-
-/* Board NAND Info. */
-/* Environment information */
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	DEFAULT_LINUX_BOOT_ENV \
-	"bootdir=/boot\0" \
-	"bootfile=zImage\0" \
-	"usbtty=cdc_acm\0" \
-	"console=ttyO2,115200n8\0" \
-	"mpurate=auto\0" \
-	"optargs=\0" \
-	"vram=12M\0" \
-	"dvimode=1024x768MR-16@60\0" \
-	"defaultdisplay=dvi\0" \
-	"mmcdev=0\0" \
-	"mmcroot=/dev/mmcblk0p2 rw\0" \
-	"mmcrootfstype=ext4 rootwait\0" \
-	"nandroot=ubi0:rootfs ubi.mtd=4\0" \
-	"nandrootfstype=ubifs\0" \
-	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
-	"mmcargs=setenv bootargs console=${console} " \
-		"${optargs} " \
-		"mpurate=${mpurate} " \
-		"vram=${vram} " \
-		"omapfb.mode=dvi:${dvimode} " \
-		"omapdss.def_disp=${defaultdisplay} " \
-		"root=${mmcroot} " \
-		"rootfstype=${mmcrootfstype}\0" \
-	"nandargs=setenv bootargs console=${console} " \
-		"${optargs} " \
-		"mpurate=${mpurate} " \
-		"vram=${vram} " \
-		"omapfb.mode=dvi:${dvimode} " \
-		"omapdss.def_disp=${defaultdisplay} " \
-		"root=${nandroot} " \
-		"rootfstype=${nandrootfstype}\0" \
-	"loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \
-	"bootscript=echo Running boot script from mmc ...; " \
-		"source ${loadaddr}\0" \
-	"loadbootenv=load mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \
-	"importbootenv=echo Importing environment from mmc ...; " \
-		"env import -t ${loadaddr} ${filesize}\0" \
-	"loaduimage=load mmc ${mmcdev} ${loadaddr} uImage\0" \
-	"mmcboot=echo Booting from mmc...; " \
-		"run mmcargs; " \
-		"bootm ${loadaddr}\0" \
-	"loadzimage=load mmc ${mmcdev}:2 ${loadaddr} ${bootdir}/${bootfile}\0" \
-	"loadfdt=load mmc ${mmcdev}:2 ${fdtaddr} ${bootdir}/${fdtfile}\0" \
-	"loadubizimage=ubifsload ${loadaddr} ${bootdir}/${bootfile}\0" \
-	"loadubifdt=ubifsload ${fdtaddr} ${bootdir}/${fdtfile}\0" \
-	"mmcbootfdt=echo Booting with DT from mmc ...; " \
-		"run mmcargs; " \
-		"bootz ${loadaddr} - ${fdtaddr}\0" \
-	"nandboot=echo Booting from nand ...; " \
-		"run nandargs; " \
-		"if nand read ${loadaddr} linux; then " \
-			"bootm ${loadaddr};" \
-		"fi;\0" \
-	"nanddtsboot=echo Booting from nand with DTS...; " \
-		"run nandargs; " \
-		"ubi part rootfs; "\
-		"ubifsmount ubi0:rootfs; "\
-		"run loadubifdt; "\
-		"run loadubizimage; "\
-		"bootz ${loadaddr} - ${fdtaddr}\0" \
-
-#define CONFIG_BOOTCOMMAND \
-	"mmc dev ${mmcdev}; if mmc rescan; then " \
-		"if run loadbootscript; then " \
-			"run bootscript; " \
-		"fi;" \
-		"if run loadbootenv; then " \
-			"echo Loaded environment from ${bootenv};" \
-			"run importbootenv;" \
-		"fi;" \
-		"if test -n $uenvcmd; then " \
-			"echo Running uenvcmd ...;" \
-			"run uenvcmd;" \
-		"fi;" \
-		"if run loaduimage; then " \
-			"run mmcboot;" \
-		"fi;" \
-		"if run loadzimage; then " \
-			"if test -z \"${fdtfile}\"; then " \
-				"setenv fdtfile omap3-${boardname}-${expansionname}.dtb;" \
-			"fi;" \
-			"if run loadfdt; then " \
-				"run mmcbootfdt;" \
-			"fi;" \
-		"fi;" \
-	"fi;" \
-	"run nandboot; " \
-	"if test -z \"${fdtfile}\"; then "\
-		"setenv fdtfile omap3-${boardname}-${expansionname}.dtb;" \
-	"fi;" \
-	"run nanddtsboot; " \
-
-/* memtest works on */
-
-/* FLASH and environment organization */
-#if defined(CONFIG_MTD_RAW_NAND)
-#define CONFIG_SYS_FLASH_BASE		NAND_BASE
-#endif
-
-/* Monitor at start of flash */
-#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_ONENAND_BASE		ONENAND_MAP
-
-#define ONENAND_ENV_OFFSET		0x240000 /* environment starts here */
-#define CONFIG_SYS_ENV_SECT_SIZE	(128 << 10)	/* 128 KiB */
-
-/* Initial RAM setup */
-#define CONFIG_SYS_INIT_RAM_ADDR	0x4020f800
-#define CONFIG_SYS_INIT_RAM_SIZE	0x800
-
-/* NAND boot config */
-#define CONFIG_SYS_NAND_MAX_ECCPOS  56
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_PAGE_COUNT	64
-#define CONFIG_SYS_NAND_PAGE_SIZE	2048
-#define CONFIG_SYS_NAND_OOBSIZE		64
-#define CONFIG_SYS_NAND_BLOCK_SIZE	(128*1024)
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
-#define CONFIG_SYS_NAND_ECCPOS      {2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, \
-					13, 14, 16, 17, 18, 19, 20, 21, 22, \
-					23, 24, 25, 26, 27, 28, 30, 31, 32, \
-					33, 34, 35, 36, 37, 38, 39, 40, 41, \
-					42, 44, 45, 46, 47, 48, 49, 50, 51, \
-					52, 53, 54, 55, 56}
-#define CONFIG_SYS_NAND_ECCSIZE		512
-#define CONFIG_SYS_NAND_ECCBYTES	13
-#define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
-#define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
-/* NAND: SPL falcon mode configs */
-#ifdef CONFIG_SPL_OS_BOOT
-#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS	0x280000
-#endif
-
-#endif				/* __CONFIG_H */