ppc4xx: Remove lcd4_lwmon5 support

This platform has not gone into production. So lets remove it.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>

1 files changed, 1 insertions, 62 deletions

diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h
index 2a50bfea16..26136a52ce 100644
--- a/include/configs/lwmon5.h
+++ b/include/configs/lwmon5.h
@@ -25,13 +25,8 @@
 
 #define CONFIG_SYS_GENERIC_BOARD
 
-#ifdef CONFIG_LCD4_LWMON5
-#define	CONFIG_SYS_TEXT_BASE	0x01000000 /* SPL U-Boot TEXT_BASE */
-#define CONFIG_HOSTNAME		lcd4_lwmon5
-#else
 #define CONFIG_SYS_TEXT_BASE	0xFFF80000
 #define CONFIG_HOSTNAME		lwmon5
-#endif
 
 #define CONFIG_SYS_CLK_FREQ	33300000	/* external freq to pll	*/
 
@@ -67,11 +62,9 @@
 #define CONFIG_SYS_PCI_MEMBASE2		(CONFIG_SYS_PCI_MEMBASE1 + 0x10000000)
 #define CONFIG_SYS_PCI_MEMBASE3		(CONFIG_SYS_PCI_MEMBASE2 + 0x10000000)
 
-#ifndef CONFIG_LCD4_LWMON5
 #define CONFIG_SYS_USB2D0_BASE		0xe0000100
 #define CONFIG_SYS_USB_DEVICE		0xe0000000
 #define CONFIG_SYS_USB_HOST		0xe0000400
-#endif
 
 /*
  * Initial RAM & stack pointer
@@ -81,20 +74,13 @@
  * content during reset (GPT0_COMP6). This way we reserve the OCM (16k)
  * for logbuffer only. (GPT0_COMP1-COMP5 are reserved for logbuffer header.)
  */
-#ifndef CONFIG_LCD4_LWMON5
 #define CONFIG_SYS_INIT_RAM_DCACHE	1		/* d-cache as init ram	*/
 #define CONFIG_SYS_INIT_RAM_ADDR	0x70000000		/* DCache       */
 #define CONFIG_SYS_INIT_RAM_SIZE		(4 << 10)
 #define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - \
 					 GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-#else
-#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_BASE
-#define CONFIG_SYS_INIT_RAM_SIZE	(4 << 10)
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - \
-					 GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
-#endif
+
 /* unused GPT0 COMP reg	*/
 #define CONFIG_SYS_POST_WORD_ADDR	(CONFIG_SYS_PERIPHERAL_BASE + GPT0_COMP6)
 #define CONFIG_SYS_OCM_SIZE		(16 << 10)
@@ -168,11 +154,8 @@
 #define CONFIG_SYS_MBYTES_SDRAM		256
 #define CONFIG_SYS_DDR_CACHED_ADDR	0x40000000	/* setup 2nd TLB cached here	*/
 #define CONFIG_DDR_DATA_EYE			/* use DDR2 optimization	*/
-#ifndef CONFIG_LCD4_LWMON5
 #define CONFIG_DDR_ECC				/* enable ECC			*/
-#endif
 
-#ifndef CONFIG_LCD4_LWMON5
 /* POST support */
 #define CONFIG_POST		(CONFIG_SYS_POST_CACHE		| \
 				 CONFIG_SYS_POST_CPU		| \
@@ -281,7 +264,6 @@
 #define CONFIG_ALT_LH_ADDR	(CONFIG_SYS_PERIPHERAL_BASE + GPT0_COMP1)
 #define CONFIG_ALT_LB_ADDR	(CONFIG_SYS_OCM_BASE)
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
-#endif
 
 /*
  * I2C
@@ -401,7 +383,6 @@
 #define CONFIG_VIDEO_SW_CURSOR
 #define CONFIG_SPLASH_SCREEN
 
-#ifndef CONFIG_LCD4_LWMON5
 /*
  * USB/EHCI
  */
@@ -417,7 +398,6 @@
 #define CONFIG_MAC_PARTITION
 #define CONFIG_DOS_PARTITION
 #define CONFIG_ISO_PARTITION
-#endif
 
 /*
  * BOOTP options
@@ -448,11 +428,9 @@
 #define CONFIG_CMD_BMP
 #endif
 
-#ifndef CONFIG_LCD4_LWMON5
 #ifdef CONFIG_440EPX
 #define CONFIG_CMD_USB
 #endif
-#endif
 
 /*
  * Miscellaneous configurable options
@@ -485,13 +463,11 @@
 
 #define CONFIG_SYS_CONSOLE_INFO_QUIET	/* don't print console @ startup*/
 
-#ifndef CONFIG_LCD4_LWMON5
 #ifndef DEBUG
 #define CONFIG_HW_WATCHDOG	1	/* Use external HW-Watchdog	*/
 #endif
 #define CONFIG_WD_PERIOD	40000	/* in usec */
 #define CONFIG_WD_MAX_RATE	66600	/* in ticks */
-#endif
 
 /*
  * For booting Linux, the board info and command line data
@@ -572,12 +548,7 @@
 #define CONFIG_SYS_GPIO_SYSMON_STATUS	62
 #define CONFIG_SYS_GPIO_WATCHDOG	63
 
-/* On LCD4, GPIO49 has to be configured to 0 instead of 1 */
-#ifdef CONFIG_LCD4_LWMON5
-#define GPIO49_VAL	0
-#else
 #define GPIO49_VAL	1
-#endif
 
 /*
  * PPC440 GPIO Configuration
@@ -659,36 +630,4 @@
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
 #endif
 
-/*
- * SPL related defines
- */
-#ifdef CONFIG_LCD4_LWMON5
-#define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_BOARD_INIT
-#define CONFIG_SPL_NOR_SUPPORT
-#define CONFIG_SPL_TEXT_BASE		0xffff0000 /* last 64 KiB for SPL */
-#define CONFIG_SYS_SPL_MAX_LEN		(64 << 10)
-#define CONFIG_UBOOT_PAD_TO		458752	/* decimal for 'dd' */
-#define CONFIG_SPL_LIBCOMMON_SUPPORT	/* image.c */
-#define CONFIG_SPL_LIBGENERIC_SUPPORT	/* string.c */
-#define CONFIG_SPL_SERIAL_SUPPORT
-
-/* Place BSS for SPL near end of SDRAM */
-#define CONFIG_SPL_BSS_START_ADDR	((256 - 1) << 20)
-#define CONFIG_SPL_BSS_MAX_SIZE		(64 << 10)
-
-#define CONFIG_SPL_OS_BOOT
-/* Place patched DT blob (fdt) at this address */
-#define CONFIG_SYS_SPL_ARGS_ADDR	0x01800000
-
-#define CONFIG_SPL_TARGET		"u-boot-img-spl-at-end.bin"
-
-/* Settings for real U-Boot to be loaded from NOR flash */
-#define CONFIG_SYS_UBOOT_BASE		(-CONFIG_SYS_MONITOR_LEN)
-#define CONFIG_SYS_UBOOT_START		0x01002100
-
-#define CONFIG_SYS_OS_BASE		0xf8000000
-#define CONFIG_SYS_FDT_BASE		0xf87c0000
-#endif
-
 #endif	/* __CONFIG_H */