diff options
| author | Mugunthan V N <mugunthanvnm@ti.com> | 2015-12-23 20:39:37 +0530 |
|---|---|---|
| committer | Jagan Teki <jteki@openedev.com> | 2016-01-13 18:47:27 +0530 |
| commit | f8e2f92d41f1ddbb14174c47deb4d0fce87a1fc0 (patch) | |
| tree | 30c622928294c0e369ad5cfd6de76dffe01214f0 /drivers | |
| parent | 223091443ccf821e0abdc8ead8441424321c5d3c (diff) | |
| download | u-boot-f8e2f92d41f1ddbb14174c47deb4d0fce87a1fc0.tar.gz u-boot-f8e2f92d41f1ddbb14174c47deb4d0fce87a1fc0.tar.bz2 u-boot-f8e2f92d41f1ddbb14174c47deb4d0fce87a1fc0.zip | |
spi: Add support for dual and quad mode
spi bus can support dual and quad wire data transfers for tx and
rx. So defining dual and quad modes for both tx and rx. Also add
support to parse bus width used for spi tx and rx transfers.
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: Jagan Teki <jteki@openedev.com>
Signed-off-by: Jagan Teki <jteki@openedev.com>
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/spi/spi-uclass.c | 38 |
1 files changed, 37 insertions, 1 deletions
diff --git a/drivers/spi/spi-uclass.c b/drivers/spi/spi-uclass.c index e0f6b25f30..677c020b11 100644 --- a/drivers/spi/spi-uclass.c +++ b/drivers/spi/spi-uclass.c @@ -157,6 +157,7 @@ static int spi_child_pre_probe(struct udevice *dev) slave->max_hz = plat->max_hz; slave->mode = plat->mode; + slave->mode_rx = plat->mode_rx; return 0; } @@ -368,7 +369,8 @@ void spi_free_slave(struct spi_slave *slave) int spi_slave_ofdata_to_platdata(const void *blob, int node, struct dm_spi_slave_platdata *plat) { - int mode = 0; + int mode = 0, mode_rx = 0; + int value; plat->cs = fdtdec_get_int(blob, node, "reg", -1); plat->max_hz = fdtdec_get_int(blob, node, "spi-max-frequency", 0); @@ -382,8 +384,42 @@ int spi_slave_ofdata_to_platdata(const void *blob, int node, mode |= SPI_3WIRE; if (fdtdec_get_bool(blob, node, "spi-half-duplex")) mode |= SPI_PREAMBLE; + + /* Device DUAL/QUAD mode */ + value = fdtdec_get_uint(blob, node, "spi-tx-bus-width", 1); + switch (value) { + case 1: + break; + case 2: + mode |= SPI_TX_DUAL; + break; + case 4: + mode |= SPI_TX_QUAD; + break; + default: + error("spi-tx-bus-width %d not supported\n", value); + break; + } + plat->mode = mode; + value = fdtdec_get_uint(blob, node, "spi-rx-bus-width", 1); + switch (value) { + case 1: + break; + case 2: + mode_rx |= SPI_RX_DUAL; + break; + case 4: + mode_rx |= SPI_RX_QUAD; + break; + default: + error("spi-rx-bus-width %d not supported\n", value); + break; + } + + plat->mode_rx = mode_rx; + return 0; } |